Upload
kothat82
View
1
Download
0
Embed Size (px)
DESCRIPTION
Free
Citation preview
ü Double deflection rubber
ü Load capacity up to 1380 kg (3043 lb) on standard range
ü Max. deflection up to 13 mm (1/2")
ü Designed to compensate for rod misalignment
ü Colour marked rubber elements for easy identification
ü Three groups 40, 50, 60 Shore A Hardness
Acrefine Rubber Hanger Open Rubber-in-Shear Vibration Isolation Hanger
Acrefine AH-OR type vibration isolation hangers are suitable for suspended mechanical equipment that generates high frequency vibration i.e. pumps, fans, blower-coil units, etc. These hangers are also used on piping and ductwork in close proximity to mechanical equipment. AH-OR type vibration isolation hangers are available with up to 13 mm (1/2") deflection as standard. The load range is from 25 kg (55 lb) to 1380 kg (3043 lb). For higher load capacities please contact us.
Acrefine AH-OR type rubber vibration isolation hangers are designed to minimize vibration and noise transmission from suspended equipment and piping. The hangers can be mounted directly to equipment-carrying brackets. They offer a cost effective solution for suspended equipment that generates noise and vibration. Vibration isolation is achieved by rubber designed to be governed by the shear modulus. This allows for increased strain, and deterioration is minimized. Rubber elements are grouped by their ‘Shore A Hardness’ which corresponds to different load ranges. There are three groups, each colour coded for easy identification and to promote correct installation.
AH-OR Type
KEY FEATURES
DESCRIPTION
APPLICATIONS
V4
www.acrefine.com E-mail: [email protected] Tel: +44 20 8520 6310 Fax: +44 20 8520 0281
Internal steel plates