1
Type Notes Catalog Number LDE EXIT SERIES Die Cast Aluminum LED Illuminated 8” or 6” Letters Battery Backup or AC only Description: Precision molded Die Cast Aluminum LED Exit sign to be used in aesthetically demanding environments. The unit housing is molded from one solid piece of specification grade die cast aluminum, eliminating seams and welding blemishes. The frame front is attached to the housing utilizing invisible hinges. The standard housing finish is Black, with a Brushed Aluminum face plate. Other finishes are available.The LDE Series provides bright even legend illumination, during both normal AC-ON and battery backup upon utility failure. Electrical: • Dual voltage input, 120/277 VAC. Contact factory for other voltages. • Solid state transfer switching. • Circuit design includes brownout protection. • Includes momentary test switch and AC-ON visual indicator. Housing: • Die Cast aluminum, Black, with Brushed Aluminum face. Optional finishes include White, Bronze,and Grey. • Exit face includes NFPA compliant knockout chevrons. All chevron and mounting point knockouts are press molded from the inside of the housing to eliminate visible seams. • All electronic components including Nickel Cadmium batteries are prewired and assembled onto internal wire way chassis. • Minimal installation wiring is needed. • Canopy is Die Cast molded. Battery: • Sealed, maintenance free Nickel Cadmium. • For use in high temperature environments. • 90 minutes minimum discharge. LED Lamps: • Ultra high brightness Aluminum Gallium Phosphate (AllnGaP) LEDs. • Both AC and Battery operation utilize the same set of LEDs. Brightness increases during battery operation. Listing/Code Compliance: • UL 924 listed • Life Safety NFPA 101, NEC/OSHA • NYC MEA/BEC, Local Laws 16 & 41. W arranty: • Battery, 15 year pro-rata. • LED lamps, 25 years • Charger board, 5 years. ORDERING INFORMATION SAMPLE CAT#: LDE-8R1 Series Letter Size Letter Color # Faces Accessories LDE LDE Battery LDA AC-Onlyl 8 8” Letters 6 6” Letters R Red G Green 1 1 Face 1C 1 Face, Canopy 2C 2 Faces, Canopy IR IR Test Option IRRM IR Remote Unit NY NYC Approved BB Blk hsg, Alum face WS Wht hsg, Alum face WW Wht hsg, Wht face TPS Tamperproof VRS Vandal shield, clear VRB Vandal Bubble STD6 6” Stem Kit STD12 12” Stem Kit Office: 718-418-5600 • Fax: 718-418-5618 57-10 49th Place • Maspeth, N.Y. 11378 www.encorelighting.com P/N75-1014 (05/05) ENERGY DA T A Charge Mode (Fully Discharged Battery) LDE Series (NiCad Battery) Input (V AC) Input Current (ma) W atts 120 25.2 2.5 277 11 2.7 A B C 8” letters 15.25” 10.25” 2.5” 6” letters 13.5” 8” 2.5”

LDE EXIT SERIES - Encore Lightingproducts.encorelighting.com/Asset/lde-series.pdf · Notes Type Catalog Number LDE EXIT SERIES Die Cast Aluminum LED Illuminated 8” or 6” Letters

  • Upload
    lamanh

  • View
    235

  • Download
    0

Embed Size (px)

Citation preview

TypeNotes

Catalog Number

LDE EXITSERIES

Die Cast AluminumLED Illuminated8” or 6” Letters

Battery Backup or AC only

Description:Precision molded Die CastAluminum LED Exit sign to beused in aesthetically demandingenvironments. The unit housing ismolded from one solid piece ofspecification grade die cast aluminum, eliminating seams andwelding blemishes. The framefront is attached to the housingutilizing invisible hinges. The standard housing finish is Black,with a Brushed Aluminum faceplate. Other finishes are available.The LDE Series provides bright even legend illumination, during both normalAC-ON and battery backup uponutility failure. Electrical:• Dual voltage input, 120/277

VAC. Contact factory for other voltages.

• Solid state transfer switching.• Circuit design includes

brownout protection. • Includes momentary test

switch and AC-ON visual indicator.

Housing:• Die Cast aluminum, Black, with

Brushed Aluminum face. Optional finishes include White, Bronze,and Grey.

• Exit face includes NFPAcompliant knockout chevrons. Allchevron and mounting point knockouts are press molded fromthe inside of the housing to eliminate visible seams.

• All electronic components including Nickel Cadmium batteries are prewired and assembled onto internal wire waychassis.

• Minimal installation wiring is needed.

• Canopy is Die Cast molded.Battery:• Sealed, maintenance free

Nickel Cadmium.• For use in high temperature

environments.• 90 minutes minimum discharge.

LED Lamps:• Ultra high brightness

Aluminum Gallium Phosphate (AllnGaP) LEDs.

• Both AC and Battery operation utilize the same set of LEDs. Brightness increases during battery operation.

Listing/Code Compliance:• UL 924 listed• Life Safety NFPA 101,

NEC/OSHA• NYC MEA/BEC,

Local Laws 16 & 41.Warranty:• Battery, 15 year pro-rata.• LED lamps, 25 years• Charger board, 5 years.

ORDERING INFORMATIONSAMPLE CAT#: LDE-8R1

Series Letter Size Letter Color # Faces Accessories

LDE

LDE Battery

LDA AC-Onlyl

8 8” Letters

6 6” Letters

R Red

G Green

1 1 Face

1C 1 Face, Canopy

2C 2 Faces, Canopy

IR IR Test Option

IRRM IR Remote Unit

NY NYC Approved

BB Blk hsg, Alum face

WS Wht hsg, Alum face

WW Wht hsg, Wht face

TPS Tamperproof

VRS Vandal shield, clear

VRB Vandal Bubble

STD6 6” Stem Kit

STD12 12” Stem Kit

Office: 718-418-5600 • Fax: 718-418-561857-10 49th Place • Maspeth, N.Y. 11378www.encorelighting.com P/N75-1014 (05/05)

ENERGY DATACharge Mode (Fully Discharged Battery)

LDE Series (NiCad Battery)

Input (VAC) Input Current (ma) Watts120 25.2 2.5277 11 2.7

A B C

8” letters 15.25” 10.25” 2.5”

6” letters 13.5” 8” 2.5”