LCT Setup Manual

Embed Size (px)

Citation preview

  • 7/31/2019 LCT Setup Manual

    1/20

    ROI-S06391-052E070827

    PASOLINK NEOLCT Setup Manual

    Version 1.1

    NEC Corporation

    Copyright 2007

  • 7/31/2019 LCT Setup Manual

    2/20

    ROI-S06391

    - i -

    Table of Contents

    1. Installation of LCTWEB (Version 2) .......................................................................................1

    2. Installation of USB Driver ......................................................................................................3

    3. Dial-up Settings .....................................................................................................................5

    4. LCT Dial-up .........................................................................................................................15

    5. Launching LCTWEB............................................................................................................17

  • 7/31/2019 LCT Setup Manual

    3/20

    ROI-S06391

    - 1 -

    1. Installation of LCTWEB (Version 2)

    Installation of the LCTWEB (Version 2) to your PC is required when the F/W Version 3.X.X ofthe IDU is used. The LCTWEB (Version 2) for standard IDU is found in the CD-ROM which isattached to the IDU equipment or you can download from the Software Key Support Systemweb site (http://www.nec-pasolink-softwarekey.com).

    Step 1: Double click Setup.vbs icon, then the installation of the LCTWEB will begin.

    Step 2: Click OK.

    Step 3: Click OK after the installation has finished.

  • 7/31/2019 LCT Setup Manual

    4/20

    ROI-S06391

    - 2 -

    After the installation has successfully completed, the following short-cut icon will be createdon your desktop.

  • 7/31/2019 LCT Setup Manual

    5/20

    ROI-S06391

    - 3 -

    2. Installation of USB Driver

    Following procedure explains how to install the USB modem driver to Windows XP.

    Step 1: Connect the PC USB port with the LCT port by a USB cable. Select Install froma list or specific location [Advanced] and click Next button.

    Step 2: Insert the CD-ROM or refer the HDD of the USB driver to the PC and selectSearch for the best driver in these locations radio button. Select Search removal media[floppy, CD-ROM] checkbox, then click Next button.

  • 7/31/2019 LCT Setup Manual

    6/20

    ROI-S06391

    - 4 -

    Step 3: Click Continue Anyway button inside the Hardware Installation alert window.

    Step 4: USB driver installation will be started. Click Finish button inside the Found NewHardware Wizard window after installation has completed.

  • 7/31/2019 LCT Setup Manual

    7/20

  • 7/31/2019 LCT Setup Manual

    8/20

    ROI-S06391

    - 6 -

    Step 3: The Welcome to the New Connection Wizard window appears. Click Nextbutton to continue.

    Step 4: Select Connect to the network at my workplace radio button and click Nextbutton to continue.

  • 7/31/2019 LCT Setup Manual

    9/20

    ROI-S06391

    - 7 -

    Step 5: Select Dial-up connection radio button and click Next button to continue.

    Step 6: In the New Connection Wizard window, enter LCT in the Company Nameentry field and click Next button to continue.

  • 7/31/2019 LCT Setup Manual

    10/20

    ROI-S06391

    - 8 -

    Step 7: Enter the phone number you will use to make the connection in the Phonenumber entry field and click Next button to continue.

    Step 8: Verify that the connection LCT is displayed as your registered connection. Youcan also create a shortcut on your desktop if you need by selecting the Add a shortcut tothis connection to my desktop checkbox. Click Finish button.

  • 7/31/2019 LCT Setup Manual

    11/20

    ROI-S06391

    - 9 -

    Step 9: Inside the Connect LCT window, click Properties.

    Step 10: Verify that Modem - USB Modem Driver [COM(#)] checkbox and Show icon innotification area when connected checkbox are selected on the General tab, then clickConfigure button.

  • 7/31/2019 LCT Setup Manual

    12/20

    ROI-S06391

    - 10 -

    Step 11: In the Modem Configuration window, make sure that all five checkboxes aredeselected, then click OK button.

    Step 12: Leave the default settings on the Options tab. Click Security tab.

  • 7/31/2019 LCT Setup Manual

    13/20

    ROI-S06391

    - 11 -

    Step 13: Leave the default settings on the Security tab. Click Networking tab.

    Step 14: On the Networking tab, verify that PPP is selected in the Type of dial-upserver I am calling drop-down menu, and File and Printer Sharing for Microsoft Networks

    and Client for Microsoft Networks checkboxes are deselected. Click Settings button.

  • 7/31/2019 LCT Setup Manual

    14/20

    ROI-S06391

    - 12 -

    Step 15: In the PPP Settings window, deselect all three checkboxes. Click OK to goback to the previous window.

    Step 16: Point Internet Protocol (TCP/IP), then click Properties.

  • 7/31/2019 LCT Setup Manual

    15/20

    ROI-S06391

    - 13 -

    Step 17: Verify that both Obtain an IP address automatically and Obtain DNS serveraddress automatically radio buttons are selected. Click Advanced button.

    Step 18: In the Advanced TCP/IP Settings window, select Use default gateway onremote network checkbox. Deselect Use IP header compression checkbox. Then clickOK button.

  • 7/31/2019 LCT Setup Manual

    16/20

    ROI-S06391

    - 14 -

    Step 19: Leave the default settings on the Advanced tab and click OK button.

  • 7/31/2019 LCT Setup Manual

    17/20

    ROI-S06391

    - 15 -

    4. LCT Dial-up

    Following procedure explains how to dial-up to the equipment.

    Step 1: Click Start | Settings | Network Connections | LCT to start dialing.

    Step 2: Click Dial button.

  • 7/31/2019 LCT Setup Manual

    18/20

    ROI-S06391

    - 16 -

    Step 3: The Connecting LCT pop-up window appears while connecting.

    Step 4: The message below will appear after LCT dial-up has connected.

  • 7/31/2019 LCT Setup Manual

    19/20

    ROI-S06391

    - 17 -

    5. Launching LCTWEB

    Step 1: Click Start | Programs | NEC_LCT | LCT For STD to start theapplication.

  • 7/31/2019 LCT Setup Manual

    20/20

    ROI-S06391

    Step 2: LCT Login window appears. Confirm the LCTWEB Version is correctlydisplayed depending on the version number of LCT WEB software you installed.

    Note: In case you click Login button before dialup, a connection failure message willappear.