LCN Price Book 2012

Door Controls Price Book 2012Effective March 5, 2012

Price Book 2012 • Effective March 5, 2012 • Rev. 3-122

Customer Care (877) 671-7011 • Fax (800) 248-1460

TABLE OF CONTENTSHow to Order Closers ................................... 2 Standard/Custom Finish Samples ............... 3 General Terms ............................................. 4-5Door Closer Specialists ................................ 6Complete Door Closers................................. 7-17Magnets....................................................... 18Specialty Products, Fasteners....................... 19Control Boxes .............................................. 20-21Compressors ............................................... 21

HOW TO ORDER CLOSERS, COMPONENTS, PARTS & ACCESSORIES1. Identify the closer series; 1460, 2030, 4040, 4210T, 4310ME, 4640, 6030, etc.

2. Determine if any additional information is required, such as: handing, finish, spring size, voltage, etc.

3. Order the material using suffix number with the description and include all necessary information.Examples: 4111 Closer x RH x CUSH x AL or 4040SE Closer x 24v x DKBRZ

4. For additional information on how to order specific closers, please see the ‘How to Order’ page in each individual closer section of the LCN General Catalog or call LCN Customer Care.

SPECIAL NOTES

1. All RAL custom finishes will be powder coated and metal covers (list add $5) will be substituted for standard covers for all closers except the 1460 series. 1460 series closers may be custom finished but a DS cover (list add $25) must be selected.

2. LCN offers more than 180 RAL custom finishes. There is a list add of ($30) per closer for an RAL finish. Most series require a metal cover (MC) ($5 add). LCN also offers a Brite Metallic (MTLPC) powder coat finish. There is a list add of ($60) per closer for the MTLPC finish. Most series require a metal cover (MC) ($5 add).

3. LCN plated list prices already include -72MC (1460 includes -72DS). Disregard the additional list add for metal cover (MC).

4. LCN powder finishes exceed ANSI/BHMA standard A156.4 for corrosion resistance by at least a factor of four. LCN powder coat finishes combined with the LCN Special Rust Inhibitor (SRI) pre-treatment exceed this standard even further.

5. Special Rust Inhibitor (SRI) is a pretreatment that is applied prior to the LCN powder coat finish and greatly exceeds ANSI/BHMA Standard A156.4 for corrosion resistance. LCN requires an additional (list add $36) charge per closer, component or part.

6. LCN plated finishes exceed ANSI/BHMA standard A156.4 for corrosion resistance.

7. Optional TORX security screw packs can be substituted for standard screw packs on most closers. See ‘Add for TORX Screw Pack’ for additional charge. In some cases, not all fasteners can be provided as TORX, consult factory for details.

8. LCN can mark individual closer boxes with door or opening #’s. Please specify ‘itemized’ when ordering. LCN requires an additional (net add $2) charge per closer, component or part.

9. Special Template (ST) pricing is available by contacting LCN Technical/Product Support or LCN Customer Care.

10. All closers conform to standards UL10C and UBC 7-2 (1997).

11. If an item or price is not listed in the LCN March 5th, 2012 Price List, consult factory for availability & pricing.

12. Prices listed in the LCN March 5th, 2012 Price List are subject to change without notice. The current ‘Terms of Sale’ applies.All prices listed in the LCN March 5th, 2012 are in US dollars.

We appreciate your business! LCN orders can be faxed or emailed - Fax: (800) 248-1460 or Email: [email protected]

Control Box Components.............................. 22-23Actuators, Sensors & Accessories ................ 24-41Parts & Accessories ..................................... 42-53Senior Swing Diagram.................................. 54Benchmark Diagram ................................... 55Repair Information/Prices............................. 56Warranty/Replacement Form ........................ 57Glossary of Abbreviations ........................... 58LCN Warranty.............................................. 59

Price Book 2012 • Effective March 5, 2012 • Rev. 3-12 3


Powder Coated FinishesLCN closers can be specified in six standard or over 180 custom powder coated finishes. Powder coating provides superior protection against the effects of weathering and provides a durable, chip resistant finish. For information about custom finishes,plated finishes and a special rust inhibiting (SRI) process, see the LCN General Catalog.

Optional Custom Powder Coated Finishes

• 180 Custom Finishes (contact customer service for availability)

• Superior Appearance

• Environmentally Friendly Process

• Durable and Chip Resistant

• Corrosion Resistant

• Match Doors, Frames, and Hardware

• AL (BHMA 689) - Aluminum

• DKBRZ (BHMA 695) - Dark Bronze

• BRASS (BHMA 696) - Brass

• LTBRZ (BHMA 691) - Light Bronze

• STAT (BHMA 690) - Statuary

• BLACK (BHMA 693) - Black

Standard Powder Coated FinishesSee LCN General Catalog, page 5 for exact colors.

Optional SRIWhen powder coated closers are installed in high humidity or potentially corrosive installations like swimming pools, watertreatment facilities or near large bodies of water, specify LCN SRI Pretreatment. This optional process extends the corrosionprotection offered by powder coat finishes.

Optional Plated FinishesLCN offers 7 plated finishes at additional cost: US 3, US 4, US 10, US 10B, US 15, US 26 and US 26D

For a list of available BAA/ARRA compliant products please contact your local SSC or sales representative to see the Ingersoll Rand Security Technologies BAA/ARRA catalog.



INGERSOLL-RAND COMPANY, SECURITY TECHNOLOGIES SECTOR,

GENERAL TERMS AND CONDITIONS OF SALE AND SERVICE

1. GENERAL. (a) This Agreement contains the terms and conditions by which Company will quote andsell its Products and Services to Customer. (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate. (c) This Agreement supersedes all pre-printed and boilerplate terms and conditions set forth in any purchase orderissued by Customer. (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions which are hereby objected to. (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT. (f) Inthe event of a conflict between this Agreement and a purchase order issued by Customer, the terms of thisAgreement will prevail. In the event of a conflict between this Agreement and any specific Product orService terms and conditions, the specific Product or Service terms and conditions will prevail.

2. SCOPE OF PRODUCTS AND SERVICES AND ORDERS.(a) Scope of Products and Services. The scope of the Products and Services (including, but not limited to location) are (i) attached to this Agreement, (ii) separately furnished by Company to Customer, or (iii) subject to Section 1 herein, contained in an order submitted by Customer. Non-standard finishes and special items may be available. Contact Company for such availability. All Products that come in “kits” cannot be sold as individual pieces. See the specific product terms and conditions for exceptions. (b) Orders. All orders submitted by Customer must be in written formacceptable to Company. (c) Receipt of an Order. Company will acknowledge receipt of each order issued in accordance with this Agreement and will notify Customer whether such order has been accepted or rejected, in whole or in part, by Company. If Company fails to acknowledge receipt of anorder, within a reasonable time period, such failure to acknowledge receipt will be deemed a rejection ofthe entire order. (d) Changes to Orders or Cancellation of Orders. Change order request and Cancellations can be by phone, fax, or email. Changes and Cancellations are allowed without penalty ifmade within 48 hours of order receipt if the order has not shipped. Some exceptions do apply - please con-sult the factory. After 48 hours, all changes or cancellations are subject to a charge of 25% of the net prod-uct or service value plus the cost of any fabrication or raw materials that have been purchased for the order.Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company thataffect the delivery date will be deemed a new order and will require acknowledgement by Company asprovided in this Section 2. The Customer cannot change or cancel credential orders and biometrics ordersonce they have been placed. If a change or cancel must occur, then the Customer will pay a penalty tochange credential and biometrics orders.

3. PRICES AND PAYMENT. (a) Prices. The prices specified by Company are subject to change, withoutnotice, to Company’s prices in effect at the time of each shipment of Products or performance of Services.Additional charges may be applied for product modification or engineering services. Oral prices specifiedby Company are null and void. (b) Invoices. Company will submit invoices to Customer stating amounts due. (c) Payment Terms. Payment terms are 2% cash discount 20 days, net 35days from date of invoice. Payment will be made in United States dollars. (d) Credit Terms. All orders are subject to Company’s credit limit and terms of credit required by Company or contained inCompany’s credit application, which is subject to change by Company at any time either before or afterdelivery of any part of the order. Company reserves the right to request payment in advance of shipment orany order or to request adequate assurances for Customer’s payment of an order and may withhold or stopshipment, without any liability to Company, until Customer submits payment or assurance of payment, as required by Company. (e) Default. If Customer is in default in payment or otherwise withrespect to any order for Products or Services or any other contract with Company, Company shall have theright, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer fur-ther shipments until such default is corrected and to declare all outstanding bills of Customer to be imme-diately due and payable. (f) Taxes. Any taxes, charges, or duties imposed by any governmental authorityon the sale of Products or Services will be paid by Customer, in addition to the selling price specified byCompany. (g) Late Payment Charge. A late payment charge of 1.5% per month equivalent to 18% per annum will be charged on past due balances owed Company. Provided however, thatin the event that applicable governmental law sets a maximum rate for late payment fees which is less than18% per annum, then the late payment charge assessed will be set at the maximum rate permitted by law.

4. INSPECTION, DELIVERY, SHIPPING, FREIGHT CHARGES, CLAIMS, AND PACKING. (a)Inspection. Inspection of Products and Services will be done by Customer immediately after receipt ofProducts or completion of Services. Inspection of Products or Services by Customer at Company's facilityis not permitted. (b) Delivery. Product delivery schedules are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Service delivery schedules are based upon prompt receipt of, and prompt access to,Customer’s equipment and all information necessary to complete the Services. In no event will Product orService delivery dates be construed as falling within the meaning of “time is of the essence.” Partial deliv-ery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery of Products or Services, shall constitute a separate sale and payment shall be separatelymade when due. If any part of the Products or Services are not delivered by Company in accordance withCustomer’s order, this Agreement shall not be affected thereby. (c) Shipping. Unless otherwise specifiedby Company, (i) where the Customer is located in the United States, all Products will be sold “UniformCommercial Code, F.O.B. Origin, Company's factory”; and (ii) where the Customer is located outside of the United States, all Products will be sold “ Ex-works, Company's factory (Incoterms 2000).” In either instance, title and risk of loss will pass to Customer upon delivery to the carri-er at Company's factory. Provided however, a security interest will remain in the Products, regardless of mode of attachment to realty or other property, until full payment has been made therefore,and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest byadequately insuring the Products against loss from damage from any cause and to have Company namedas an additional insured. Copies of all Certificates of Insurance will be provided to Company upon request.Customer will also assist Company in providing all necessary documents or signatures required to file any documents to perfect Company’s interest in such Products. (d) Freight Charges. The full cost of freight, via a carrier of our choice, will be allowed (and prepaid) on shipments of the netdollar amount or more indicated in the chart below within the United States of America, excluding all territories.

On shipments of the net dollar amount (Table 1) or more to all foreign countries and US territories, freight willbe allowed (and prepaid) to the Port of Embarkation. Shipments under the net dollar amount will be prepaidby Company and a freight charge percentage of the net invoice amount or $10, whichever is greater, will beadded to the invoice. The percentage (Table 2) is based on the National U.S. Average On Highway DieselFuel Prices reported by the U.S. Department of Energy (the “Fuel Index”) calculated as the average price inthe prior calendar quarter. For example the charge for July 18th 2011 will be based on the average Fuel Indexprice for the months of April, May and June. All expedited methods of shipment, such as 'next day air', will beprepaid by Company but the entire shipping costs will be added to the invoice. Company will ship as request-ed, freight collect, if the Customer is willing to bear the entire expense and so indicates on the order. Oncereceived by Company, a purchase order cannot be combined with another purchase order to qualify for freightallowed. In addition the Customer may not combine any of the brands or product categories listed above on asingle purchase order to qualify for freight allowed, except in the case of FASTRACK. IR FASTRACK may not be combined with Falcon FASTRACK to qualify for freight allowed. Freight Chargepercentages and thresholds are subject to change without prior notice. If the Fuel Index rises above $7.50/gal-lon or there are changes to the thresholds, the above table will be updated. (e) Claims. All claims for loss ordamage to Products while in the care, custody, and/or control of a carrier will be the responsibility ofCustomer, who will submit any claims. (f) Packing. Company will pack, mark, and ship the Productsaccording to its standard procedures for shipment, unless the parties agree, in writing, that Company willcomply with any special instructions provided by Customer. Compliance with special instructions may result in an increased price.

5. CLAIMS. Claims due to shortages, errors, omissions, damaged goods, or defective material must besubmitted within 30 days from the date of the invoice.

6. PRODUCT CHANGES. Company reserves the right to change without notice the design of, or theprocess of manufacturing, the Products covered by this Agreement; provided that the foregoing will not beconstrued as relieving Company from its obligation to deliver Products which conform to the specifications which Company may have furnished to Customer.

7. PRODUCT RETURNS. Purchased material can only be returned to the factory by obtaining ReturnMaterial Authorization (RMA) and must be returned to Company within 90 days of issuance of the RMA.Returned material must be new, unused, non-obsolete, and non-specially manufactured and been inCustomer’s inventory no more than 180 days from the date of shipment by Company. The RMA number,the original invoice number, and the reason for the return must be included in the return. If the companyapproves the return, a credit will be issued to the Customer’s account less freight and a handling charge of35% of the net material on the original invoice. Handling charges may vary depending on the condition of the return. The amount of final credit will be determined upon receipt at thefactory and analyzing the condition of the material. Factory retains the right to deny credit toanyone for any reason.

8. TECHNICAL INFORMATION AND ADVICE. (a) All designs, data, and specifications provided by Company are proprietary and will not be disclosed or reused by Customer without the priorwritten consent of Company. (b) Company assumes no obligation or liability for any advice given byCompany, the results obtained, or damages incurred, and all such advice is given and accepted at Customer’s risk.

9. INTELLECTUAL PROPERTY OWNERSHIP.

Nothing herein is a grant or license or right under any specific patent or intellectual property asset of ither party. With regard to intellectual property ownership, all intellectual property and related intellectual property rights (hereinafter “IP”) owned by one party before the date of this Agreement willremain owned by that party. All IP conceived, developed, or reduced to practice as part of this Agreementafter the date and during the term of this Agreement shall be owned by the party creating the intellectual property if created by one party without the benefit of the other party’s IP. All IP created joint-ly will be owned by the parties jointly, in direct proportion to monetary contribution. The party that has a majority interest shall manage the jointly owned IP. Neither party shall disclose any of the otherparty’s IP to a third party without prior written consent. All intellectual property and related documents which are confidential shall remain subject to the terms and conditions of this Agreement for twenty (20) years from its effective date, unless such information is made public before this time expires.

10. LIMITED WARRANTY.

(a) Company's Standard Limited Warranty(ies) relating to Products or Services are applicable to thisAgreement. The limited warranty(ies) are (i) attached to this Agreement; (ii) separately identified in the specific Product Price Book; or (iii) separately furnished by Company to Customer. (b) (i) In the eventthat certain Product warranties are not attached to this Agreement or separately furnished, Company war-rants only to Customer that Products will be free from defects in material and

12-3/1

Brand Net Dollar Amount

Schlage Mechanical $7,000

Schlage Electronic Security (excluding Biometrics, Software, $7,000Controllers, Readers & Credentials)

Schlage Biometrics, Readers &Credentials

Freight Charges Apply

Schlage Software & Controllers Freight Charges Apply

Von Duprin $7,000

LCN $7,000

IR FASTRACK $7,000

Falcon Locks $5,000

Falcon Exits $5,000

Falcon Closers $5,000

Falcon FASTRACK $5,000

Ives & Glynn-Johnson $1,000

Steelcraft Refer to separatefreight terms

Table 1: Freight Minimums

U.S. Average On-highway DieselFuel Price ($/Gallon)

At But Less FreightLeast: Than: Charge

$0.00 $2.99 3.0%

$3.00 $3.49 3.4%

$3.50 $3.99 3.5%

$4.00 $4.49 3.6%

$4.50 $4.99 3.7%

$5.00 $5.49 3.8%

$5.50 $5.99 3.9%

$6.00 $6.49 4.0%

$6.50 $6.99 4.1%

$7.00 $7.49 4.2%

Table 2: Freight Rate (minimum $10.00)



workmanship for a period of 12 months from the date of shipment of the Products. CO-Series locks,AD-Series locks, AD-Series Reader Modules, WPR400, WRI400, WSM400 TK400, CT5000,PIM400, PIM401, PIB300, and PIB301 will be warranted for a period of 12 months from thedate of installation, not to exceed 24 months from the date of shipment from the factory.Company’s sole obligation under this warranty is limited to repairing or replacing, at its option,the defective

Products. (ii) The provisions of this limited Product warranty do not apply to Products: (A) usedfor the purposes for which they are not designed or intended;

(B) which have been repaired or altered without Company's prior written consent; (C) whichhave been subjected to misuse, abuse, negligence, or accident; (D) which have been improperlystored, installed, maintained, or operated; (E) which have been used in violation of writteninstructions provided by Company to Customer; (F) which have subjected to improper tempera-ture, humidity, or other environmental conditions; (G) which have been affected by normal wearand tear; or (H) which, based on Company's examination, do not disclose to Company's satisfac-tion nonconformance to the warranty.

(c) (i) In the event that certain Service warranties are not attached to this Agreement or separatelyfurnished, Company warrants only to Customer that the Services will be free from defects in material and workmanship for a period of 6 months from the date of completion of the particularitems of Service.Company’s sole obligation under this warranty is limited to repairing or replacing, atits option, the defective Products. (ii) The provisions of this limited Product warranty do not apply toProducts: (A) used for the purposes for which they are not designed or intended; (B) which have beenrepaired or altered without Company's prior written consent; (C) which have been subjected to misuse,abuse, negligence, or accident; (D) which have been improperly stored, installed, maintained, or operated; (E) which have been used in violation of written instructions provided by Company to Customer; (F) which have subjected to improper temperature, humidity, or other environmental conditions; (G) which have been affected by normal wear and tear; or (H) which, based on Company'sexamination, do not disclose to Company's satisfaction nonconformance to the warranty.(c) (i) In the event that certain Service warranties are not attached to this Agreement or separately furnished, Company warrants only to Customer that the Services will be free from defects in materialand workmanship for a period of 6 months from the date of completion of the particular items of Service. Company’s sole obligation under this warranty is limited to repairing or reperformance, at itsoption, of the Service; provided however, if repair or reperformance is either impractical or impossible,the Company will refund to Customer that portion of the price paid to the Company for the defectiveitem of Service. This warranty only applies if the company is given written notice of the defect or nonconformance by the Customer within 30 days of discovery. (ii) The provisions of this limited Service warranty does not apply to any defects or issues with the design or performance of equipmentor products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection, or construction of any goods.

(d) NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO

THE PRODUCTS OR SERVICES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

(e) The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Products or other manufacturer’s products; (ii) shipping and freight expenses required to return Products to Company; (iii) normal maintenance;and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anythingother than defects in Company’s material (products only) or workmanship.

11. CUSTOMER'S REMEDIES. THE CUSTOMER'S EXCLUSIVE AND SOLE REMEDY

ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF PRODUCTS OR

SERVICES THAT DO NOT CONFORM TO THIS AGREEMENT WILL BE TO (A) SECURE

REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR

REPERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE

PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT

WILL THE COMPANY'S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR

THE PRODUCTS OR ITEM OF SERVICE.

12. LIMITATION OF LIABILITY. IN NO EVENT WILL COMPANY BE LIABLE FOR

INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES

INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE

INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, INTEREST, LOST

GOODWILL, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY

REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF

OPERATION, OR CLAIMS OF CUSTOMER'S CUSTOMERS, WHETHER BASED ON

CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT

LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

13. STATUTE OF LIMITATIONS. NO ACTION ARISING OUT OF ANY CLAIMED

BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER

MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

14. CONSUMER PRODUCTS. With respect to “consumer products” as defined under the Magnuson-Moss Warranty Act (“MMWA”), the following statements are made. (a) Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply toyou. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED

TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 10 ABOVE. (b) Somestates do not allow the exclusion or limitation of incidental or consequential damages, so the abovelimitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and youmay also have other rights which vary from state to state.

15. FORCE MAJEURE. Any delay or failure of Company to perform its obligations hereunder willbe excused to the extent that it is caused by an event or occurrence beyond its control such as, by way of example and not by way of limitation, acts of God, actions by any governmental authority (whethervalid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms,explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, but not limitedto, lockouts, strikes, and slowdowns) at Company's facility, its source plant or their suppliers, inability

to obtain power, material, labor equipment, or transportation, or court injunction or order. The deliverydate will be extended for a time equal to that of the delay and the schedule for Company’s performancewill be deemed adjusted in the individual order(s) to that effect.

16. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with any attachmentsor supplements specifically referenced in this Agreement, constitutes the entire agreement between theparties hereto and supersedes all previous communications, representations, or agreements, either oralor written, between the parties hereto with respect to the subject matter hereof. No agreement or understanding varying or expanding this Agreement will be binding upon either party hereto unless it is in writing and signed by a duly authorized representative thereof.

17. TERMINATION. (a) This Agreement may be terminated by either party by giving 30 days' written notice to the other party in the event of failure by such other party to fulfill any of its obligations hereunder. However, if during the period of such notice, such other party remedies such failure, this Agreement will continue with the same force and effect as if such notice had not beengiven. (b) This Agreement may be terminated upon the written mutual consent of the parties. (c) Eitherparty may immediately terminate this Agreement by giving written notice to the other party in the eventof the happening of any of the following or any other comparable event: (i) insolvency of the otherparty; (ii) filing of a petition in bankruptcy by or against the other party; (iii) appointment of a receiveror trustee for the other party; or (iv) execution of an assignment for the benefit of creditors by the otherparty, all of which will allow Company to demand reclamation of all affected orders. (d) Except as pro-vided in this section 17, Customer may not terminate this Agreement, in whole or in part, unlessCompany’s prior written consent is obtained and Customer agrees to pay all of Company’s cancellationcharges.

18. GOVERNING LAW; VENUE; AND EXPENSES. (a) This Agreement and any disputes or controversies arising hereunder will be governed by and construed according to the internal laws of the State of Indiana, United States of America, without regard to its conflict of law principles, and notincluding the United Nations Convention on Contracts for the International Sale of Goods. (b)Jurisdiction and venue with respect to any action, proceeding, or suit in connection with this Agreementwill reside in the courts of the State of Indiana. (c) Customer agrees to pay for all expenses (includingattorney’s fees) incurred by Company in enforcing the obligations of Customer under this Agreement.

19. COMPLIANCE WITH LAWS, EXPORT CONTROLS, CERTIFICATIONS, AND

NUCLEAR LIABILITY. (a) This Agreement is subject to, and Company and Customer will comply with, all laws and export controls, regulations, rules, orders, licenses, requirements, and governmental requests now or hereafter in effect in the United States of America that pertain to theProducts or the initial sale of the Products or that pertain to Services. Provided however, Company isnot responsible for obtaining or maintaining any permits for the performance of Services or the verification or compliance with any code requirements relative to the performance of Services. To theextent any sale of Products or Services pursuant to this Agreement may require approval of the U.S.Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government inconnection with such approval. (b) Certain Products are noted by Company as tested by independentlaboratories for compliance with UL and/or ANSI standards. Any and all modifications or alterations to such Products will void such certification, and Company is not liable to Customer to certify any modified or altered Product. (c) In the event the Products are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and itssuppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out ofthe nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers.

20. NO INDUCEMENTS. The parties hereto represent to each other and each agrees that, neither itnor any person acting on its behalf has, in contravention of any applicable law, given or offered to give,or will give or offer to give, any sum of money or other material consideration to any person, directly orindirectly, as an inducement to obtain business hereunder or to influence the granting of licenses orother governmental permissions to enter into this Agreement or perform obligations hereunder.

21. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate ingood faith to arrive at an alternative arrangement approximating the original business objective of theparties. The remaining terms and conditions of this Agreement will remain in effect.

22. NO IMPLIED WAIVER. The failure of either party at any time to require performance by theother party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision ofthis Agreement constitute a waiver of any succeeding breach of the same or any other provision.

23. MISCELLANEOUS. (a) This Agreement does not constitute either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of theother party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder. (b) Neither this Agreement nor any right or obligation hereunder may be transferred or assigned by either party without the prior written approval of the other party, except thatCompany can transfer or assign this Agreement or any right or obligation (including, but not limited tothe right to receive payments for any orders) to Ingersoll-Rand Company or an Ingersoll-Rand Company entity without first obtaining Customer’s consent. (c) The rights and remedies herein reservedto Company will be cumulative and additional to any other or further rights and remedies provided atlaw or equity. (d) Customer does not have the right to setoff or to back charge against any amountswhich become payable to Company under this Agreement or otherwise. (e) The official text of thisAgreement is in the English language. If this Agreement is translated into another language, the Englishtext will govern any question with respect to interpretation. (f) The headings in this Agreement are forconvenience of reference only and do not affect the meaning of this Agreement in any manner.

24. DEFINITIONS. (a) “Agreement” means Ingersoll-Rand Company, Security Technologies SectorTerms and Conditions of Sale and Service. (b) “Company” means Ingersoll-Rand Company, SecurityTechnologies Sector. (c) “Customer” means the Buyer. (d) “Buyer” means the purchaser of productsor Services from Company. (e) “U.S.” means United States of America.

12-3/2

Since its founding in 1926, LCN has specialized in solving door control problems through the use of high quality, innovative door control products. By adhering to high standards of performance, LCN has earned a leadership rolewithin the industry and is committed to meeting door control challenges of the future. With representatives locatedthroughout the world, LCN provides the products and services necessary to solve your door control problems.

Cast Iron Heavy-duty cast iron. There isn’t astronger, harder, more reliable material for door closers that areexpected to deliver millions of cycles. Cast iron is more compatiblewith high grade steel compo nentsand is more resistant to the wear ofmillions of opening/closing cycles.

Princeton, ILLCN has been manufacturing it’s door closers in Princeton, IL since we moved from Chicago in 1949.We’re committed to continuing toprovide the quality you expect, from a brand you trust most.

Forged Steel Arms The closing power and control generated within LCN closers istransferred to the door throughforged steel arms. Forged steel arms have greater strength, betterappearance and less bulk.

Patented Green Dial The patented green dial was firstintroduced on the 4040 in the year2000. The green dial indicates thespring size setting on the closerwhich allows for fast and accurateinstallation and maintenance.

Heat-Treated LCN forged steel pinions have larger,stronger teeth and are double heat-treated for the greatest possiblestrength on the shaft. Heat treatingmakes the pinion harder, better ableto resist wear after years of serviceand results in less stress on the cylinder.

Special Templates When a standard door closer won’t do the job, there is only one proven, reliable source for special solutions—LCN. With over 3,000 special templates on file, LCN can provide adoor control solution for one-of-a-kinddoors such as vault, balanced, over-sized and arch doors.

All Weather Fluid LCN uses a special formula hydraulicfluid that acts as an insulator to keepcloser components working smoothly.This unique all-weather hydraulicfluid eliminates the need for seasonaladjustments.

Customer Care Call us! We’re ready to assist withyour door control needs.

The LCN formula for success



Door CLoSEr SpECiaLiStS


* See page 2 for additional ordering information.

CompLEtE Door CLoSErS

1260 Series - Surface Mount1261.........................................REG $230 N/A N/A 111261 .....................................Rw/PA 235 N/A N/A 121261 ...................................Rw/62A 250 N/A N/A 121261 ......................................LONG 230 N/A N/A 111261 .............................................H 255 N/A N/A 111261 .....................................Hw/PA 260 N/A N/A 121261 ...................................HLONG 255 N/A N/A 111261 .........................................EDA 255 N/A N/A 131261 .............................EDA w/62G 255 N/A N/A 131261.......................HEDA (Handed) 286 N/A N/A 131261 ...........HEDA w/62G (Handed) 286 N/A N/A 131261 ......................................CUSH 286 N/A N/A 121261 ...................................HCUSH 336 N/A N/A 12Add for; Slim Cover (SLIM) ($10), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36)For parts & accessories, see page 42.

March 2012

CLOSER SERIES

SERIES NUMBER ARM TYPE

STANDARDPOWDER COAT

FINISHES

AL (689)DKBRZ (695) BRASS (696)LTBRZ (691)STAT (690)

BLACK (693)

SH WI EP IP GI HN TG

US26D US 3 US 10BUS 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

� �

� �

�

� �

� �

�

1260 Series

1460 Series - Surface Mount1461.........................................REG $304 $560 $630 91461 .....................................Rw/PA 309 620 710 111461 ...................................Rw/62A 324 635 725 111461 ......................................LONG 304 560 630 91461 .............................................H 329 640 699 101461 .....................................Hw/PA 334 700 779 111461 ...................................HLONG 329 640 699 101461 ...........................................HD 323 608 682 91461 .....................................HD/PA 328 668 762 111461.................................HDw/62A 343 683 777 111461................................HD/LONG 323 608 682 101461 .........................................EDA 329 659 735 121461 .............................EDA w/62G 329 659 735 121461.......................HEDA (Handed) 360 707 797 121461 ...........HEDA w/62G (Handed) 360 707 797 121461 ......................................CUSH 360 707 797 111461 ...................................HCUSH 410 752 854 111461....................................SCUSH 489 783 881 111461 .................................SHCUSH 525 845 942 11Add for; Delay Action (DEL) ($30), Designer Series Cover (DS) ($25), Full Cover (FC) ($3), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 42.

1460T Series - Surface Mount1460T, 1461T ...........................STD $366 $618 $695 12 1460T, 1461T................................H 386 638 715 121460T, 1461T ...................BUMPER 376 628 705 121460T, 1461T ...............H BUMPER 396 648 725 12Add for; Designer Series Cover (DS) ($25), Full Cover (FC) ($3), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 43.

1460T Series

1460 Series

1460 Seriesw/DS Cover






2010 Series - Concealed (Requires Handing)2011, 2013-2016......................STD $533 $807 $902 132011, 2013-2016 ..........................H 553 827 922 142011, 2013-2016 .............BUMPER 543 817 912 132011, 2013-2016..........H BUMPER 563 837 932 14Add for; TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 43.

2030 Series - Concealed (Requires Handing)2031-2035................................STD $887 $1,262 $1,366 142031-2035 ....................................H 907 1,282 1,386 142031-2035........................BUMPER 897 1,272 1,376 142031-2035....................H BUMPER 917 1,292 1,396 14Add for; TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 43.

2210 Series - Concealed (Requires Handing)2213-2215................................STD $743 $1,052 $1,125 172213DPS-2215DPS .................STD 836 1,145 1,218 17Add for; Advanced Variable Backcheck (AVB) ($15), Special Rust Inhibitor (N/A with DPS) (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 43.

2310ME Series - Concealed (Requires Handing & Voltage)2314ME ...................................STD $985 $1,269 $1,354 17Add for; Bypass Cylinder (B80) or (B140) ($95), TORX Fasteners (TORX) ($12), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 44.

2610 Series - Concealed (Requires Handing)2613-2614................................STD $1,610 $1,902 $1,988 22 Add for; Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)See pages 20-21 for control boxes and compressors. Also, see pages 24-41 for actuators, tubing, & accessories.For parts & accessories, see page 44.

CLOSER SERIES


STANDARDPOWDER COAT

FINISHES


BLACK (693)



PRICE LIST

PLATED FINISHES

March 2012

2010 Series

2310ME Series

2210DPS Series

2030 Series

2610 Series



9



CLOSER SERIES



PRICE LIST

March 2012

STANDARDANODIZEDFINISHES

ANCLRANDKB

N/A N/A

PLATED FINISHES

2810 Series - Concealed (Requires Handing)2811 ...................................STD/CP $4,354 ANCLR or ANDKB 782811...................................STD/OP 4,479 ANCLR or ANDKB 78Header lengths available 33" to 48" on operators without POS or BKY (please specify).Header lengths available 36" to 48" on operators with POS or BKY (please specify).STD/CP arm has 2 ¾" spindle center, STD/OP arm has 3 ¾" spindle center.Add for; Double Door Header (49" to 98" – please specify) (DD) ($205),Positive Mechanical Stop (STD/CP arm only) (POS) ($25), Breakaway Stop (STD/CP arm only) (BKY) ($90)See pages 24-41 for actuators & accessories.

For parts & accessories, see page 44.

2850 Series - Concealed/Simultaneous Pair2853 ...................................STD/CP $7,441 ANCLR or ANDKB 1552853...................................STD/OP 7,691 ANCLR or ANDKB 155Header lengths available 52" to 98" on operators without POS or BKY (please specify).Header lengths available 70" to 98" on operators with POS or BKY (please specify).STD/CP arm has 2 ¾" spindle center, STD/OP arm has 3 ¾" spindle center.Add for; Positive Mechanical Stop (STD/CP arm only) (POS) ($50), Breakaway Stop (STD/CP arm only) (BKY) ($180)See pages 24-41 for actuators & accessories.


2860 Series - Concealed/Independent Pair2863 ...................................STD/CP $8,767 ANCLR or ANDKB 1552863...................................STD/OP 9,017 ANCLR or ANDKB 155Header lengths available 65" to 98" on operators without POS or BKY (please specify).Header lengths available 70" to 98" on operators with POS or BKY (please specify).STD/CP arm has 2 ¾" spindle center, STD/OP arm has 3 ¾" spindle center.Add for; Positive Mechanical Stop (STD/CP arm only) (POS) ($50), Breakaway Stop (STD/CP arm only) (BKY) ($180)See pages 24-41 for actuators & accessories.


2810 Series

2850 Series

2860 Series

3030 Series - Concealed (Requires Handing)3031-3034 ...............................REG $382 $539 $585 63031-3034 ....................................H 433 592 637 6Add for; TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 45.

3130 Series - Concealed (Requires Handing)3131-3133................................STD $422 $593 $639 83131-3133 ....................................H 442 613 659 83131-3133........................BUMPER 432 603 649 83131-3133....................H BUMPER 452 623 669 8Add for; TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 45.

3130SE Series - Concealed (Requires Handing & Voltage)3133SE-3134SE ......................STD $671 $841 $887 83133SE-3134SE ..................LONG 671 841 887 8Add for; TORX Fasteners (TORX) ($12), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 45.

4000T Series - Wall Pocket (SEM7800 Series Available Separately)4003T-4004T ............................STD $461 $730 $815 15Add for; Metal Cover (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 45.

4010 Series - Surface Mount (Requires Handing)4011 or 4016 ...........................REG $408 $762 $876 114011 or 4016 ................................H 454 815 933 124011 or 4016...............................FL 521 NA NA 15Add for; Delay Action (DEL) ($30) (4011 only), Telephone Cylinder (TEL) ($30), Metal Cover (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)Note - 4010 Series is available as 4011 (Adjustable 1-5) or 4016 (Size 6 Only - Not ADA Compliant).For parts & accessories, see page 45.

4010T Series - Surface Mount (Requires Handing)4011T, 4013T-4014T ................STD $448 $713 $787 164011T, 4013T-4014T.....................H 468 733 807 164011T, 4013T-4014T ........BUMPER 458 723 797 164011T, 4013T-4014T ....H BUMPER 478 743 817 164011T, 4013T-4014T...................DE 498 763 837 164011T, 4013T-4014T ............DE HO 518 783 857 164011T, 4013T-4014T ..DE BUMPER 508 773 847 164011T, 4013T-4014TDE H BUMPER 528 793 867 16Add for; Metal Cover (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 46.


CLOSER SERIES



PRICE LIST

PLATED FINISHES

March 2012



STANDARDPOWDER COAT

FINISHES


BLACK (693)

3030 Series

3130 Series

3130SE Series

4000T Series

4010 Series

4010T Series



4020 Series - Surface Mount (Requires Handing)4021 or 4026 ...........................REG $408 $762 $876 114021 or 4026.........................LONG 408 762 876 114021 or 4026 ................................H 454 815 933 124021 or 4026...............................FL 521 NA NA 12Add for; Delay Action (DEL) ($30) (4021 only), Telephone Cylinder (TEL) ($30), Metal Cover (MC) ($5),TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)Note - 4020 Series is available as 4021 (Adjustable 1-5) or 4026 (Size 6 Only - Not ADA Compliant).For parts & accessories, see page 46.

4020T Series - Surface Mount (Requires Handing)4021T, 4023T-4024T ................STD $448 $713 $787 154021T, 4023T-4024T.....................H 468 733 807 164021T, 4023T-4024T ........BUMPER 458 723 797 154021T, 4023T-4024T ....H BUMPER 478 743 817 16Add for; Metal Cover (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 46.

4030 Series - Surface Mount4031.........................................REG $337 $592 $679 84031 .....................................Rw/PA 342 652 759 94031 ...................................Rw/62A 357 667 774 84031............................................LD 317 561 626 84031 ......................................LD/PA 322 621 706 84031 ....................................LD/62A 337 636 721 84031 ......................................LONG 337 592 679 84031 .............................................H 365 667 738 84031 .....................................Hw/PA 370 727 818 94031 ...................................HLONG 365 667 738 84031 .........................................EDA 353 687 760 94031.......................HEDA (Handed) 383 735 823 94031 ......................................CUSH 383 735 823 94031 ...................................HCUSH 436 773 884 94031....................................SCUSH 514 807 903 94031 .................................SHCUSH 564 868 958 9Add for; Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 46.

4030T Series - Surface Mount4031T .......................................STD $385 $639 $713 94031T ...........................................H 405 659 733 9Add for; Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 47.

4020 Series

4030 Series

4020T Series

4030T Series


CLOSER SERIES


STANDARDPOWDER COAT

FINISHES


BLACK (693)



PRICE LIST

PLATED FINISHES

March 2012




4040SE Series

4040SEH Series

4040XPT Series


CLOSER SERIES


STANDARDPOWDER COAT

FINISHES


BLACK (693)



PRICE LIST


PLATED FINISHES

March 2012



4040XP Series - Surface Mount4040XP ..................................REG $422 $776 $898 134040XP ...............................Rw/PA 427 836 978 134040XP ...............................LONG 422 776 898 144040XP .............................XLONG 452 806 928 144040XP .............................Rw/62A 442 851 993 124040XP .......................................H 472 843 958 134040XP ..............................Hw/PA 477 903 1,038 124040XP .............................HLONG 472 843 958 124040XP ..................................EDA 455 832 949 144040XP .......................EDA w/62G 455 832 949 134040XP ................HEDA (Handed) 481 853 970 144040XP ....HEDA w/62G (Handed) 481 853 970 134040XP ...............................CUSH 481 853 970 144040XP .............................HCUSH 536 913 1,037 144040XP .............................SCUSH 617 939 1,068 154040XP ..........................SHCUSH 660 1,006 1,118 15Add for; Metal Cover (Handed) (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 47.

4040XPT Series - Surface Mount4040XPT...................................STD $469 $726 $804 154040XPT.......................................H 489 746 824 164040XPT ..........................BUMPER 479 736 814 154040XPT.......................H BUMPER 499 756 834 164040XPT .....................DE (Handed) 519 776 854 164040XPT .................DE H (Handed) 539 796 874 164040XPT.....DE BUMPER (Handed) 529 786 864 164040XPT .DE H BUMPER (Handed) 549 806 884 16Add for; Metal Cover (Handed) (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 47.

4040SE Series - Surface Mount (Requires Voltage)4040SE ....................................STD $734 $1,001 $1,086 124040SE ................................LONG 734 1,001 1,086 124040SE ......................DE (Handed) 784 1,051 1,136 12Add for; Metal Cover (Handed) (MC) ($5), TORX Fasteners (TORX) ($12), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 48.

4040SEH Series - Surface Mount Arm & Track Only (Requires Voltage) (Closer Available Separately)4040SEH ....4040SEH-3038 w/Arm $447 $603 $638 8 Add for; TORX Fasteners (TORX) ($12)Note - Includes 4040SEH Track & 4040SEH Arm Only.For parts & accessories, see page 48.

4040XP Series

4110 Series - Surface Mount (Requires Handing)4111 or 4116............................EDA $408 $762 $876 134111 or 4116................EDA w/62G 408 762 876 134111 or 4116 .........................HEDA 454 815 933 134111 or 4116 .............HEDA w/62G 454 815 933 134111 or 4116...............................FL 521 NA NA 154111 or 4116.........................CUSH 454 815 933 134111 ...................................HCUSH 517 876 999 144111 or 4116 ......................SCUSH 592 905 1,019 154111 .................................SHCUSH 645 990 1,082 15Add for; Delay Action (DEL) ($30) (4111 only), Advanced Variable Backcheck (AVB) ($15), Telephone Cylinder (TEL) ($30), Metal Cover (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)Note - 4110 Series is available as 4111 (Adjustable 1-5) or 4116 (Size 6 Only - Not ADA Compliant).For parts & accessories, see page 48.

4110T Series - Surface Mount (Requires Handing)4111T, 4113T-4114T ................STD $448 $713 $787 154111T, 4113T-4114T.....................H 468 733 807 164111T, 4113T-4114T ........BUMPER 458 723 797 154111T, 4113T-4114T ....H BUMPER 478 743 817 16Add for; Metal Cover (MC) ($5), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 48.

4210 Series - Surface Mount (Requires Handing)4211 or 4216............................EDA $435 $575 $610 144211 or 4216.........................CUSH 481 621 656 144211 ...................................HCUSH 544 684 719 15Add for; Delay Action (DEL) ($30) (4211 only), Advanced Variable Backcheck (AVB) ($15), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60) Note - 4210 Series is available as 4211 (Adjustable 1-5) or 4216 (Size 6 Only - Not ADA Compliant).For parts & accessories, see page 48.

4210T Series - Surface Mount (Requires Handing)4211T, 4213T-4214T ................STD $531 $802 $875 15Add for; Advanced Variable Backcheck (AVB) ($15), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 49.


CLOSER SERIES


STANDARDPOWDER COAT

FINISHES


BLACK (693)



PRICE LIST

PLATED FINISHES


PRICE LIST

PLATED FINISHES

March 2012



4210 Series

4210T Series

4110 Series

4110T Series


CLOSER SERIES


STANDARDPOWDER COAT

FINISHES


BLACK (693)



PRICE LIST

PLATED FINISHES

4310ME Series - Surface Mount (Requires Handing & Voltage)4314ME ......................................SF $1,057 $1,411 $1,514 174314ME ......................................DE 1,107 1,461 1,564 17Add for; Bypass Cylinder (B80) or (B140) ($95), TORX Fasteners (TORX) ($12), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 49.

4410ME Series - Surface Mount (Requires Handing & Voltage)4414ME ..................................REG $1,002 $1,414 $1,543 174414ME ................................LONG 1,002 1,414 1,543 17 Add for; Bypass Cylinder (B80) or (B140) ($95), TORX Fasteners (TORX) ($12), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)Closer price includes 4410ME-18 for regular mount or 4410ME-18G (please specify) plate for flush mount application.For parts & accessories, see page 49.

4510 Series - Surface Mount (Requires Handing)4511 or 4516............................EDA $435 $575 $610 14Add for; Delay Action ($30) (4511 only), Advanced Variable Backcheck (AVB) ($15), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___) ($30), Brite Metallic (MTLPC) *($60)Note - 4510 Series is available as 4511 (Adjustable 1-5) or 4516 (Size 6 Only - Not ADA Compliant).For parts & accessories, see page 49.

4510T Series - Surface Mount (Requires Handing)4511T, 4513T-4514T ................STD $531 $802 $875 15Add for; Advanced Variable Backcheck (AVB) ($15), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 49.

4630 Series - Surface Mount4631 .........................................STD $4,649 $5,086 $5,171 40Add for; TORX Fasteners (TORX) ($12), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)Note - Optional Concealed On/Off Switch (CS) Available ($0) - Please Specify.See pages 24-41 for actuators & accessories.For parts & accessories, see page 49.

4640 Series - Surface Mount4642.........................................REG $4,587 $5,111 $5,233 404642 ......................................LONG 4,617 $5,141 $5,263 40 Add for; TORX Fasteners (TORX) ($12), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)Note - Optional Concealed On/Off Switch (CS) Available ($0) - Please Specify.See pages 24-41 for actuators & accessories.For parts & accessories, see page 50.


PLATED FINISHES

March 2012



4630 Series

4640 Series

4510 Series

4510T Series

4310ME Series

4410ME Series

4810 Series - Surface Mount4811 .........................................STD $1,590 $1,887 $1,982 19Add for; Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)See pages 20-21 for control boxes and compressors. Also, see pages 22-41 for actuators, tubing, & accessories.For parts & accessories, see page 50.

4820 Series - Surface Mount4822.........................................REG $1,523 $1,907 $2,034 194822 ......................................LONG 1,553 1,937 2,064 19Add for; Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)Closer price includes 4820-18 plate for regular mount or 4820-18G (please specify) plate for flush mount application.See pages 20-21 for control boxes and compressors. Also, see pages 22-41 for actuators, tubing, & accessories.For parts & accessories, see page 50.

4840 Series - Surface Mount4841 .........................................EDA $1,556 $1,963 $2,085 204841 ......................................CUSH 1,582 1,984 2,106 204841....................................SCUSH 1,718 2,070 2,204 20Add for; Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)See pages 20-21 for control boxes and compressors. Also, see pages 22-41 for actuators, tubing, & accessories.For parts & accessories, see page 51.

5010 Series - Concealed (Requires Handing)5011-5016 ...............................REG $474 $793 $922 125011-5016 ....................................H 520 846 979 13Add for; Delay Action (DEL) ($30), TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 51.

5030 Series - Concealed (Requires Handing)5031, 5033-5036 .....................REG $829 $1,253 $1,392 145031, 5033-5036 ..........................H 875 1,306 1,449 14Add for; TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 51.

6030 Series - Concealed/Double Acting6031-6035........................BUMPER $1,065 $1,396 $1,603 176031-6035....................H BUMPER 1,085 1,416 1,623 17Add for; TORX Fasteners (TORX) ($12), Special Rust Inhibitor (SRI) ($36), Custom Powder Finish (RAL___)* ($30), Brite Metallic (MTLPC)* ($60)For parts & accessories, see page 51.

4820 Series

4810 Series


CLOSER SERIES




PRICE LIST

PLATED FINISHES


STANDARDPOWDER COAT

FINISHES


BLACK (693)

PRICE LIST

PLATED FINISHES

March 2012



4840 SeriesShown w/4840-459 Door Loop (LCN)

5030 Series

6030 SeriesShown w/ 7253 Pivot (Ives)

5010 Series


CLOSER SERIES



ANCLRANDKB


N/A N/A

PRICE LIST

PLATED FINISHES

9130 Series - Surface Mount Plated finish not available9131 ................................STD (Pull) $3,203 ANCLR or ANDKB 3827" cover (MC) is standard - Optional 'Full Cover' (FC) (36") available (please specify)Add for Full Cover (FC) ($80)See pages 24-41 for actuators & accessories.For parts & accessories, see page 51.

9140 Series - Surface Mount Plated finish not available9142..............................REG (Push) $3,203 ANCLR or ANDKB 389142...........................LONG (Push) 3,203 ANCLR or ANDKB 3827" cover (MC) is standard - Optional 'Full Cover' (FC) (36") available (please specify)Add for Full Cover (FC) ($80)See pages 24-41 for actuators & accessories.For parts & accessories, see page 51.

9150 Series - Surface Mount Plated finish not available9153............................REG2 (Push) $6,404 ANCLR or ANDKB 859153.........................LONG2 (Push) 6,404 ANCLR or ANDKB 8572" cover (MC) is standard. Additional lengths are not available.See pages 24-41 for actuators & accessories.For parts & accessories, see page 52.


PRICE LIST

PLATED FINISHES

March 2012



9130 Series

9140 Series

9150 Series

9530 Series - Surface Mount (Requires Handing) Plated finish not available9531 ................................STD (Pull) $4,045 ANCLR or ANDKB 78 Header lengths available 33" to 48" (please specify). Angle Brackets (HL/B) are standard, End Dress Plates (HL/D) are optional (please specify).STD arm has 2 ¾" spindle center.Add for; Double Door Header (49" to 98" – please specify) (DD) ($205)See pages 24-41 for actuators & accessories.For parts & accessories, see page 52.

9540 Series - Surface Mount (Requires Handing) Plated finish not available9542..............................REG (Push) $4,045 ANCLR or ANDKB 789542..................LONG (Long Push) 4,045 ANCLR or ANDKB 78Header lengths available 33" to 48" (please specify). Angle Brackets (HL/B) are standard, End Dress Plates (HL/D) are optional (please specify).REG or LONG arm has 2 ¾" spindle center. Optional 12 ¼" spindle available (requires minimum 43" header).Add for; Double Door Header (49" to 98" – please specify) (DD) ($205)See pages 24-41 for actuators & accessories.For parts & accessories, see page 52.

9550 Series - Surface Mount (DE Requires Handing) Plated finish not available9553 ....................REG2 (Push Pair) $6,989 ANCLR or ANDKB 1559553 ........LONG2 (Long Push Pair) 6,989 ANCLR or ANDKB 1559553.......................STD2 (Pull Pair) 6,989 ANCLR or ANDKB 1559553 ......REG/STD (Double Egress) 6,989 ANCLR or ANDKB 155Header lengths available 52" to 98" (please specify) on operators with REG or LONG (push) arms.Header lengths available 60" to 98" (please specify) on operators with STD (pull) arms.Header lengths available 60" to 98" (please specify) on operators with REG/STD (double egress) arms.Angle Brackets (HL/B) are standard, End Dress Plates (HL/D) are optional (please specify).REG, LONG, STD or REG/STD has 2 ¾" spindle center.Optional 12 ¼" spindle available (requires minimum 71" header).See pages 24-41 for actuators & accessories.For parts & accessories, see page 52.

9560 Series - Surface Mount (DE Requires Handing) Plated finish not available9563 ....................REG2 (Push Pair) $8,316 ANCLR or ANDKB 1559563 ........LONG2 (Long Push Pair) 8,316 ANCLR or ANDKB 1559563.......................STD2 (Pull Pair) 8,316 ANCLR or ANDKB 1559563 ......REG/STD (Double Egress) 8,316 ANCLR or ANDKB 155Header lengths available 65" to 98" (please specify) on operators with REG or LONG (push) arms.Header lengths available 65" to 98" (please specify) on operators with STD (pull) arms.Header lengths available 65" to 98" (please specify) on operators with REG/STD (double egress) arms.Angle Brackets (HL/B) are standard, End Dress Plates (HL/D) are optional (please specify).REG, LONG, STD or REG/STD has 2 ¾" spindle center.Optional 12 ¼" spindle available (requires minimum 84" header).See pages 24-41 for actuators & accessories.


9530 Series

9540 Series

9550 Series

9560 Series


CLOSER SERIES



PRICE LIST

PLATED FINISHES

March 2012



ANCLRANDKB

N/A N/A




SEM7850

SEM1960

SEM1980

SEM1970

SEM7820

SEM7810

SEM7830

SEM7840

PRICE LIST

SEm SEriES maGNEtS

SEM7800 Series Magnet Extension KitsSEM7810-517...............................................SEM Extension Kit (55 pcs) $875 8Note - Extension Kit includes 1/2" extensions (10), 3/4" extensions (10),

1" extensions (10), 2" extensions (5) & ball pivot/connector links (20 ea).

Individual extensions & ball pivot/connector links are available, please see page 42 in this price book for part number and list price.

SEM7800 Series MagnetsSEM7820 . . . . . . . . . . . . . . . . . . . . . . . . . . Floor Mount Magnet (Single Side) $598 5Low Profile Armature, Metal Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.

SEM7830 . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Mount Magnet 339 4Low Profile Armature, Metal Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.

SEM7840 . . . . . . . . . . . . . . . . . . . . . . . . . . Recessed Wall Mount Magnet 339 4Low Profile Armature, Metal Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.

SEM7850 . . . . . . . . . . . . . . . . . . . . . . . . . . Recessed Wall Mount Magnet 339 4Standard Profile Armature, Metal Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.For parts & accessories, see page 42.

SEM1900 Series MagnetsSEM1960 . . . . . . . . . . . . . . . . . . . . . . . . . Wall Mount Magnet $272 3Low Profile Armature, Plastic Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.

SEM1970 . . . . . . . . . . . . . . . . . . . . . . . . . Recessed Wall Mount Magnet 272 3Low Profile Armature, Plastic Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.

SEM1980 . . . . . . . . . . . . . . . . . . . . . . . . . Recessed Wall Mount Magnet 272 3Standard Profile Armature, Plastic Housing, Tri Voltage (12v/24v/120v) w/ 35lbs. holding force.For parts & accessories, see page 42.

SPECIALTY PRODUCTS

PRODUCT DESCRIPTIONNUMBER

STANDARDPOWDER COAT

FINISHES

AL (689)DKBRZ (695)


PRICE LIST

March 2012


paH60, paiNt aND FaStENErS

Parallel Arm HolderPAH60 (Handed) . . . . . .Door Holder $128 $336 $392 3

Force GaugeADA/FG . . . . . . . . . . . . .Force Gauge $59 1/2

LCN Spray Paint - Available in single cans or cases of 6 (same color) cansCan . . . . . . . . . . . . . . . .Spray Paint $27 Per can 1Case . . . . . . . . . . . . . . . .Spray Paint 125 Per case (6 cans, same color) 4

Fasteners - Individual & SetsSRT (1 ea.) . . . . . . . . . . .SRT Screw (1 ea.) $1 Self reaming & tapping screw.

Size required. 1 ea.SRT (Set of 4 ea.) . . . . .SRT Screw (4 ea.) 3 Self reaming & tapping screw.

Size required. 4 ea.MS (1 ea.) . . . . . . . . . . .Machine Screw (1 ea.) 1 3 5 Machine screw. Size required. 1 ea.MS (Set of 4 ea.) . . . . . .Machine Screw (4 ea.) 3 10 13 Machine screw. Size required. 4 ea.WS (1 ea.) . . . . . . . . . . .Wood Screw (1 ea.) 1 Wood screw. Size required. 1 ea.WS (Set of 4 ea.) . . . . . .Wood Screw (4 ea.) 3 Wood screw. Size required. 4 ea.TORX (1 ea.) . . . . . . . . .TORX Screw (1 ea.) 2 5 9 TORX machine screw. Size required. 1 ea.TORX (Set of 4 ea.) . . . .TORX Screw (4 ea.) 5 13 17 TORX machine screw. Size required. 4 ea.TB 1 3/4" (1 ea.) . . . . . .Thru Bolt, Female 2 6 9 Through bolt. 1 3/4" length.TB 1 3/8" (1 ea.) . . . . . .Thru Bolt, Female 2 6 9 Through bolt. 1 3/8" lengthTB 1 5/8" (1 ea.) . . . . . .Thru Bolt, Female 2 6 9 Through bolt. 1 5/8" lengthTB 1 3/4" (Set of 4 ea.) .Thru Bolt, Female (4 ea.) 5 21 25 Through bolt. Set of 4 ea. Size requiredTB 1 3/8" (Set of 4 ea.) .Thru Bolt, Female (4 ea.) 5 21 25 Through bolt. Set of 4 ea. Size required.TB 1 5/8" (Set of 4 ea.) .Thru Bolt, Female (4 ea.) 5 21 25 Through bolt. Set of 4 ea. Size required.TB/MS (1 ea.) . . . . . . . . .TB(1) & MS(1) 2 7 9 TB & MS. Set of 1 ea.

Size and Series required.TB/MS (Set of 4 ea.) TB(4) & MS(4) 6 23 33 TB & MS. Set of 4 ea.

Size and Series required.

Torx (Security) Driver BitsT-10 TORX Bit . . . . . . . .Torx Bit, T-10 $13 TORX driver bit, size T-10.T-15 TORX Bit . . . . . . . .Torx Bit, T-15 13 TORX driver bit, size T-15.T-20 TORX Bit . . . . . . . .Torx Bit, T-20 13 TORX driver bit, size T-20.T-25 TORX Bit . . . . . . . .Torx Bit, T-25 13 TORX driver bit, size T-25.T-27 TORX Bit . . . . . . . .Torx Bit, T-27 13 TORX driver bit, size T-27.

Adjustment WrenchesT1157 . . . . . . . . . . . . . .Hold Open Wrench $4 Hold Open Adjustment Wrench

Green Hex Wrenches - NOW AVAILABLE!

One end has 3/32" hex for regulation valve adjustment and cover attachment. The other end has 5/32" hex for spring power adjustment. Great for training seminars.

GHW12 . . . . . . . . . . . . .Green Hex Wrench $72 / Pack of 12 Green Hex Wrench. Pack of 12.GHW100 . . . . . . . . . . . .Green Hex Wrench $500 / Pack of 100 Green Hex Wrench. Pack of 100.

PRICE LIST


ADA/FG

PAH60

SPECIALTY PRODUCTS

PRODUCT DESCRIPTIONNUMBER

STANDARDPOWDER COAT

FINISHES


BLACK (693)


US26D US 3 US 10BUS 4 US 15

US 10 US 26

PLATED FINISHES

March 2012



PRICE LIST

7980 Series Control Boxes7981................Control Box, Pnuematic, Internal Compressor. $2,222 27

Self-contained control box/compressor combination for single door application. Includes -3960 Compressor Assembly.

7981ES ...........Control Box, Pnuematic, Electric Strike (ES) Relay, Internal Compressor. 2,586 27Self-contained control box/compressor combination for single door application. Includes -3960 Compressor Assembly, -3390A Relay.

7982................Control Box, Pnuematic, Internal Compressor 3,147 34Self-contained control box/compressor combination for either independent or simultaneous operation of two (2) door leaves.Includes -3960 Compressor Assembly.

7982S .............Control Box, Pnuematic, Sequential (S) Feature, Internal Compressor. 3,418 34Self-contained control box/compressor combination for independent, simultaneous or sequential operation of two (2) door leaves. Includes -3960 Compressor Assembly, -3426 Sequencer Card.

7982ES ...........Control Box, Pnuematic, Electric Strike (ES) Relays, Internal Compressor. 3,784 34Self-contained control box/compressor combination for independent or simultaneous operation of two (2) door leaves. Includes -3960 Compressor Assembly, -3390A & -3390B Relays.

7982SES .........Control Box, Pnuematic, Sequential (S) Feature, Electric Strike (ES) Relays, 4,028 34Internal Compressor. Self-contained control box/compressor combination for independent, simultaneous or sequential operation of two (2) door leaves. Includes -3960 Compressor Assembly, -3390A & -3390B Relays, -3426 Sequencer Card.

7900 Series Control Boxes7901................Control Box, Pnuematic $1,526 14

Single door application or independent control of single door in multiple door systems. Two door leaves can be operated, if activated simultaneously. Requires a separate 900 Series compressor.

7901ES ...........Control Box, Pnuematic Electric Strike (ES) Relay. 1,891 14Single door application or independent control of single door in multiple door systems. Two door leaves can be operated, if activated simultaneously. Includes -3390A Relay. Requires a separate 900 Series compressor.

7902................Control Box, Pnuematic 2,088 15Independent operation of two (2) door leaves or simultaneous and/or sequential operation of four (4) door leaves. Requires a separate 900Series compressor.

7902S .............Control Box, Pnuematic, Sequential (S) Feature 2,356 15Independent operation of two (2) door leaves or simultaneous operationand/or sequential operation of four (4) door leaves. Includes -3426 Sequencer Card. Requires a separate 900 Series compressor.

7902ES ............Control Box, Pnuematic, Electric Strike (ES) Relays 2,733 15Independent operation of two (2) door leaves or simultaneous of four (4) door leaves. Includes -3390A & -3390B Relays. Requires a separate 900 Series compressor.

7902SES.........Control Box, Pnuematic, Sequential (S), Electric Strike (ES) Relays 2,990 15Independent operation of two (2) door leaves or simultaneous and/or sequential operation of four (4) door leaves. Includes -3390A &-3390B Relays, -3426 Sequencer Card. Requires a separate 900 Series compressor.

Note - Locate a 7980 Series Control Box within 50 linear tubing feet of the door. Locate a 7900 Series Control Box within 100 linear tubing feet of the door.Use -925 Pnuematic Tubing to connect operator and control box. 7900 Series Control Boxes require a separate air source, LCN 900 Series Compressors arerecommended. For parts & accessories, see pages 22-23.

LIST PRICEPRODUCT DESCRIPTION


March 2012

7980 Series Control Box(15˝ x 15˝ x 6˝)


CONTROL BOXES & COMPRESSORS

PRODUCT NUMBER

CoNtroL BoXES


PRICE LIST

7940 Series Control Boxes - (Requires LCN 900 series compressor)7949................Control Box, Pneumatic, Auxiliary 'Blow-Open' $1,256 14

Control box works with or without 7901/7902 Series Control Box and one or two pnuematic Auto Equalizers. Controlled by the smoke evacuation system, the 7949 Series Control Box will open the door(s) to allow fresh air into building.

7949ES ...........Control Box, Pneumatic, Auxiliary 'Blow-Open', Electric Strike (ES) Relay. 1,562 14Auxiliary 'blow-open' control box works with or without 7901ES/7902ES Series Control Box and one or two pnuematic Auto Equalizers. Controlled by the smoke evacuation system, the 7949 Series Control Box will unlock and open the door(s) to allow fresh air into building.

Note - A ‘blow-open’ system requires a separate air source. A 'blow-open' system that includes an automatic or power operator function also requires a separate air source and is limited to the operation of two (2) door leaves. In both cases, the LCN 900 Series Compressors are recommended. 7940 Series Control Boxes should be installed within 100 linear tubing feet of the automatic operator(s).For parts & accessories, see pages 22-23.

900 Series Compressors - (Specify 115V or 230V on 922 and 923 Series)920..................Compressor, 2 Gallon Tank (Gast #1HAB-85T-M100X) $2,346 48

Normal usage would allow the function of up to two (2) Auto Equalizers. Includes auto drain. 23" length x 9" width x 17" height.

921..................Compressor, 12 Gallon Tank (Gast #2HBC-59T-M200X) 3,638 90Normal usage would allow the function of up to four (4) Auto Equalizers. Includes auto drain. 31" length x 14" width x 21" height.

922* ................Compressor, 20 Gallon Tank (Gast #4HCC-95T-M450X) 4,824 118Normal usage would allow the function of up to eight (8) Auto Equalizers. Includes auto drain. 33" length x 20" width x 27" height.

923* ................Compressor, 30 Gallon Tank (Gast #7HDD-71T-M750X) 9,461 175Normal usage would allow the function of up to twenty (20) Auto Equalizers. Includes auto drain. 38" length x 23" width x 30" height.

Note - 900 Series Compressors should be installed within 500 linear feet of the 7900 or 7940 Series Control Box. 900 Series Compressors are not manufactured by LCN and would carry the one (1) year warranty offered by the original manufacturer. For warranty questions, please contact Gast Manufacturing at (269) 926-6171.Parts & accessories are not available.* - 922 & 923 Compressors are special order and require an approximate eight (8) week lead time.



900 Series Compressor

LIST PRICEPRODUCT DESCRIPTION


March 2012

CONTROL BOXES & COMPRESSORS

PRODUCT NUMBER

CoNtroL BoXES aND ComprESSorS



CoNtroL BoX CompoNENtSPRICE LIST

Control Box Components293G .....................Muffler $21 Exhaust muffler for 7901, 7902, 7981, or 7982 Series Control Boxes.319 ........................Fitting, “T” 2 “T” fitting to connect 925 pneumatic tubing.320 ........................Fitting, “Inline” 2 “Inline” fitting to connect 925 pneumatic tubing.329 ........................Air Filter Assembly 53 Replacement inlet air filter for the 7981 or 7982 Series Control Boxes.329G .....................Air Filter Assembly 171 Replacement inlet air filter for the 7901 or 7902 Series

Control Boxes. Includes -929 Air Filter Assembly.390 ........................Relay 171 Single pole, double throw (SPDT) relay only for the 7901,

7902, 7981, & 7982 Series Control Boxes.390C......................Relay 181 Double pole, double throw (DPDT) relay only for the

7949 series 'blow open' Series Control Box.900 ........................Power Supply, 10T 393 Main power supply/input board for the 7901, 7902,

7981, & 7982 Series Control Boxes. Ten (10) terminals.903 ........................Timer Module 171 0-30 second timer module for 7901, 7902, 7981, &

7982 Series Control Box. Plugs into the -900 Power Supply Board.925 ........................Pneumatic Tubing 2.00/ft Flexible pneumatic tubing with an 1/8" inner diameter & 1/4" outer

diameter. Specify number of linear feet required when ordering.929 ........................Filter & Seal 23 Internal filter & seal component to the 329G Air Filter Assembly.941 ........................Valve Assembly 582 Regulator valve assembly for the 7901 series control box.941C......................Valve Assembly 582 Regulator valve assembly for the 7949 series control box.942 ........................Valve Assembly 1,121 Regulator valve assembly for the 7902 series control box.962 ........................Isolator 19 Rubber isolator for 7981 or 7982 compressor (-3960) assembly.

Control Box Components3293 ......................Filter Service Kit $72 Filter replacement for 7981 or 7982 Series Control Box

Includes -329 Inlet Filter, plastic elbow, short piece of -925 tubing.

3299A....................Solenoid Assembly 328 Air valve assembly for the 7981 Series Control Box or theValve 'A' 'A' circuit valve assembly in the 7982 Series Control Box.

3299B....................Solenoid Assembly 355 Air valve assembly for the 'B' circuit in the 7982 SeriesValve 'B' Control Box.

3328 ......................Copper Coupler 19 Converts pnuematic tubing connection to copper.

3390A....................'A' Relay Package 389 Electric strike (ES) relay for 7901 and 7981 Series Control Boxesor the 'A' circuit ES relay assembly used in the 7902 and 7982.Series Control Boxes. Can be added to a standard control box to convert to ES operation. Includes -390 Relay, relay base and wire harness. The 3390A is included when either a 7901ES, 7902ES, 7981ES or 7982ES is ordered.

3390B....................'B' Relay Package 389 Electric strike (ES) relay for 'B' circuit in either the 7901 or 7981Series Control Boxes. Can be added to a standard control box to convert to ES operation. Includes -390 Relay, relay base and wire harness. The 3390B is included when either a 7902ES or 7982ES is ordered.

3390C ...................'C' Relay Package 389 Electric strike (ES) relay assembly for the 7949 series 'blow-open' control box. Includes -390C Relay, relay base and wire harness. The 3390C is included when a 7949ES is ordered.

3426 ......................Sequencer Card 260 Dual, 0-30 second timer module for 7902 or 7982 Series Control Box. Can be added to a standard 7902 or 7982 Series Control Boxto convert box to sequential operation.-3426 Sequencer card isincluded when either a 7902S or 7982S Series Control Box is ordered.

3592 ......................Compressor Service Kit 56 Service kit for air pressure adjustment in the either the 7981 or 7982 Series Control Box.

3960 ......................Compressor Assembly 1,466 Internal air pump assembly for the 7981 or 7982 Series Control Box. -3960 Compressor Assembly includes startercapacitor, -962 Isolators and -329 Air Filter Assembly.

CONTROL BOX COMPONENTS

PRODUCT NUMBER DESCRIPTIONLIST PRICE PRODUCT DESCRIPTION

March 2012

900

903

3426

3960

CAPACITOR

3299A

3390A


March 2012

293G

900 903 3426

941 941C 942

925 3960 3592

329G 329 390 929 962 3299A 3299B 3390A

Control Box Components

7902SES 7982SES

CAPACITOR

7949ES 3390C

941C

329G

293G

7949ES




PRICE LIST

8310 Series Actuators - Jamb Mount - 1-1/2" x 4-3/4" Rectangle - Interior Installation Only8310-818...............Actuator, Jamb Mount $134 Actuator, 1-1/2" x 4-3/4" Rectangle, Logo

8310-818T ............Actuator, Jamb Mount 134 Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Text

8310-3818WF.......Actuator, Jamb Mount 301 Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Wireless, Flush MountIncludes 8310-818 Actuator, 8310-844J Transmitter Kit,8310-819F Flush Box. Requires 8310-865 Receiver.

8310-3818WS.......Actuator, Jamb Mount 301 Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Wireless, Surface MountIncludes 8310-818 Actuator, 8310-844J Transmitter Kit,8310-819S Surface Box. Requires 8310-865 Receiver.

8310-3818TWF.....Actuator, Jamb Mount 301 Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Text, Wireless, Flush MountIncludes 8310-818T Actuator, 8310-844J TransmitterKit, 8310-819F Flush Box. Requires 8310-865 Receiver.

8310-3818TWS ....Actuator, Jamb Mount 301 Actuator, 1-1/2" x 4-3/4" Rectangle, Logo, Text, Wireless, Surface MountIncludes 8310-818T Actuator, 8310-844J Transmitter Kit, 8310-819S Surface Box. Requires 8310-865 Receiver.

8310-865...............Receiver 160 Receiver, Wireless, 1 Channel, Sequencing FeatureUsed in conjunction w/ Wireless Actuators & Transmitters

8310 Series Actuators - Wall Mount - 4-1/2" Round8310-856...............Actuator, Wall Mount $156 Actuator, 4-1/2" Round, Logo

8310-856T ............Actuator, Wall Mount 156 Actuator, 4-1/2" Round, Logo, Text

8310-3856WF.......Actuator, Wall Mount 421 Actuator, 4-1/2" Round, Logo, Wireless, Flush Mount.Includes 8310-856 Actuator, 8310-844 Transmitter Kit, 8310-868F Flush Box, 8310-800 Weather Ring. Requires 8310-865 Receiver.

8310-3856WS.......Actuator, Wall Mount 421 Actuator, 4-1/2" Round, Logo, Wireless, Surface MountIncludes 8310-856 Actuator, 8310-844 Transmitter Kit,8310-868S Surface Box, 8310-800 Weather Ring.Requires 8310-865 Receiver.

8310-3856TWF.....Actuator, Wall Mount 421 Actuator, 4-1/2" Round, Logo, Text, Wireless, Flush MountIncludes 8310-856T Actuator, 8310-844 Transmitter Kit,8310-868F Flush Box, 8310-800 Weather Ring.Requires 8310-865 Receiver.

8310-3856TWS ....Actuator, Wall Mount 421 Actuator, 4-1/2" Round, Logo, Text, Wireless, Surface MountIncludes 8310-856T Actuator, 8310-844 Transmitter Kit,8310-868S Surface Box, 8310-800 Weather Ring. Requires 8310-865 Receiver.

8310-865...............Receiver 160 Receiver, Wireless, 1 Channel, Sequencing FeatureUsed in conjunction w/ Wireless Actuators & Transmitters

ACTUATORS & ACCESSORIES

PRODUCT NUMBER DESCRIPTIONLIST PRICE PRODUCT DESCRIPTION March

2012

8310-818

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

8310-818T

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-856

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-856T

aCtuatorS & aCCESSoriES



March 2012

8310-818

818 844J

819F

8310-3818WF818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 844J

819S

8310-3818WS818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

8310-818T

818T

856

844J

819F

8310-3818TWF

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

818T 844J

819S

8310-3818TWS

8310-3856WF 8310-3856WS

8310-3856TWF 8310-3856TWS

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-856

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-856T

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

800

868F

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

844

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

856

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

800

868S

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

844

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

856T

800

868F

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

844

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

856T

800

868S

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

844

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310 Series Actuators


8310 Series Actuators - Wall Mount - 4-3/4" Square8310-853 .............Actuator, Wall Mount $197 Actuator, 4-3/4" Square, Logo

8310-853T ...........Actuator, Wall Mount 197 Actuator, 4-3/4" Square, Logo, Text

8310-853WP .......Actuator, Wall Mount 536 Actuator, 4-3/4" Square, Logo, Wireless, Surface MountEasy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver

8310-853TWP .....Actuator, Wall Mount 536 Actuator, 4-3/4" Square, Logo, Text, Wireless, Surface MountEasy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver

8310-3853WF......Actuator, Wall Mount 472 Actuator, 4-3/4" Square, Logo, Wireless, Flush MountIncludes 8310-853, 8310-844 Transmitter Kit,8310-867F Flush Box, 8310-801 Weather Ring. Requires 8310-865 Receiver

8310-3853WS .....Actuator, Wall Mount 472 Actuator, 4-3/4" Square, Logo, Wireless, Surface MountIncludes 8310-853, 8310-844 Transmitter Kit,8310-867S Surface Box, 8310-801 Weather Ring.Requires 8310-865 Receiver

8310-3853TWF......Actuator, Wall Mount 472 Actuator, 4-3/4" Square, Logo, Text, Wireless, Flush MountIncludes 8310-853T, 8310-844 Transmitter Kit,8310-867F Flush Box, 8310-801 Weather Ring.Requires 8310-865 Receiver

8310-3853TWS......Actuator, Wall Mount 472 Actuator, 4-3/4" Square, Logo, Text, Wireless, Surface MountIncludes 8310-853T, 8310-844 Transmitter Kit,8310-867S Surface Box, 8310-801 Weather Ring.Requires 8310-865 Receiver

8310-865 .............Receiver 160 Receiver, Wireless, 1 Channel, Sequencing FeatureUsed in conjunction w/ Wireless Actuators & Transmitters

8310 Series Actuators - Wall Mount - 4-3/4" Square - Specialty8310-813 .............Actuator, Wall Mount $716 Actuator, 4-3/4" Square, Touchless, Wall Mount

'K' Band Technology 'Hands Free' operation, system is activated by movement near actuator face. Mounts in 4" x 4" electrical box - Includes black plexiglass cover

8310-855 .............Actuator, Wall Mount 314 Actuator, 4-3/4" Square, Logo, Dual Vestibule

8310-3855WF......Actuator, Wall Mount 706 Actuator, 4-3/4" Square, Logo, Dual Vestibule, Wireless, Flush MountIncludes 8310-855 Actuator, 8310-844 Transmitter (2), 8310-867F Flush Box, 8310-801 Weather Ring. Requires 8310-865 Receiver (2)

8310-3855WS .....Actuator, Wall Mount 706 Actuator, 4-3/4" Square, Logo, Dual Vestibule, Wireless, Surface MountIncludes 8310-855 Actuator, 8310-844 Transmitter (2), 8310-867S Surface Box, 8310-801 Weather Ring. Requires 8310-865 Receiver (2)

8310-865 .............Receiver 160 Receiver, Wireless, 1 Channel, Sequencing FeatureUsed in conjunction w/ Wireless Actuators & Transmitters

PRICE LIST





2012

8310-853

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-853T

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-855



March 2012

8310-853

853

844

8310-3853WF853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

867F

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-3853WS

853

844

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

867S

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-853T

853T

844

8310-3853TWF853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-853WP

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-855

8310-853TWP

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-813 8310-865

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

867F

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-3853TWS

8310-3855WF 8310-3855WS

853T

844

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

867S

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

855855

844

813

867F

844

865

3855WF

Missing855

3855WS

844

867S

867F

844867S

Missing855

Missing855

Missing801

Missing801

Missing801

867F

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

844

813

867F

844

865

3855WF

Missing855

3855WS

844

867S

867F

844867S

Missing855

Missing855

Missing801

Missing801

Missing801

867S

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)


801 801

801 801

801 801



8310 Series Actuators - Wall Mount - 6" Round8310-852 .............Actuator, Wall Mount $206 Actuator, 6" Round, Logo

8310-852T ...........Actuator, Wall Mount 206 Actuator, 6" Round, Logo, Text

8310-852WP .......Actuator, Wall Mount 536 Actuator, 6" Round, Logo, Wireless, Surface Mount Easy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver.

8310-852TWP .....Actuator, Wall Mount 536 Actuator, 6" Round, Logo, Text, Wireless, Surface Mount Easy mount, 'all in one', low profile, surface mount, wireless actuator. Requires 8310-865 Receiver.

8310-3852WF......Actuator, Wall Mount 477 Actuator, 6" Round, Logo, Wireless, Flush Mount Includes 8310-852 Actuator, 8310-844 Transmitter Kit, 8310-869F Flush Box, 8310-802 Weather Ring. Requires 8310-865 Receiver.

8310-3852WS .....Actuator, Wall Mount 477 Actuator, 6" Round, Logo, Wireless, Surface Mount Includes 8310-852 Actuator, 8310-844 Transmitter Kit, 8310-869S Surface Box, 8310-802 Weather Ring.Requires 8310-865 Receiver.

8310-3852TWF .....Actuator, Wall Mount 477 Actuator, 6" Round, Logo, Text, Wireless, Flush Mount Includes 8310-852T Actuator, 8310-844 Transmitter Kit, 8310-869F Flush Box, 8310-802 Weather Ring. Requires 8310-865 Receiver.

8310-3852TWS .....Actuator, Wall Mount 477 Actuator, 6" Round, Logo, Text, Wireless, Surface MountIncludes 8310-852T Actuator, 8310-844 Transmitter Kit, 8310-869S Surface Box, 8310-802 Weather Ring.Requires 8310-865 Receiver.

8310-865 .............Receiver 160 Receiver, Wireless, 1 Channel, Sequencing Feature Used in conjunction w/ Wireless Actuators & Transmitters


PRICE LIST



2012

8310-852

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-852T

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-852WP

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-852TWP

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876



March 2012

8310-852

852844

802

3852WF852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-852T852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-852WP

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-852TWP

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

869F

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

852844

802

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

869S

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

3852WS

852T844

802

3852TWF

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

869F

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

852T844

802

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

869S

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

3852TWS

8310-865




8310 Series Actuators - Wall Mount - 4-3/4" Square8310-3822T .........Actuator Package $312 Actuator Package, 1-1/2" x 4-3/4", Jamb Mount

Includes 8310-818T (2) Jamb Mount Actuator, (2) Surface Mount Box. 8310-819S Recommended for interior use only.

8310-3822TW......Actuator Package 754 Actuator Package, 1-1/2" x 4-3/4", Wireless, Jamb Mount Includes 8310-818T (2) Jamb Mount Actuator, 8310-819S (2) Surface Mount Box, 8310-844J (2) Jamb Mount Transmitter, 8310-865 Receiver. Recommended for interior use only.

8310-3860T .........Actuator Package 517 Actuator Package, 4-1/2" Round, Wall Mount.Includes 8310-856T (2) Wall Mount Actuator, 8310-868S Surface Mount Box

8310-3860TW......Actuator Package 960 Actuator Package, 4-1/2" Round, Wireless, Wall Mount Includes 8310-856T (2) Wall Mount Actuator, 8310-868S (2) Surface Mount Box, 8310-800 (2) Weather Ring, 8310-844 (2) Transmitter, 8310-865 Receiver

8310-3857T .........Actuator Package 619 Actuator Package, 4-3/4" Square, Wall Mount.Includes 8310-853T (2) Wall Mount Actuator, 8310-867S (2) Surface Mount Box

8310-3857TW......Actuator Package 1,096 Actuator Package, 4-3/4" Square, Wall Mount.Includes 8310-853T (2) Wall Mount Actuator, 8310-867S (2) Surface Mount Box, 8310-801 (2) Weather Ring, 8310-844 (2) Transmitter, 8310-865 Receiver


PRICE LIST



2012

3822TW

818T (2) 819S (2)

844J (2)

865


March 2012

8310-3822TW

818T (2)

3822T

819S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-3860TW

3860T

856T (2) 868S (2)

853T (2)

3857TW

867S (2)

801 (2)

865

844 (2)

8310-3857TW

3857T

867S (2)853T (2)

8310 Series Actuator Packages

8310-3822T

8310-3860T

8310-3857T




8310 Series Actuator Accessories8310-800 .............Ring, Weather $18 Weather Ring, 4-1/2" Round

Optional accessory. Can be used w/ any 4-1/2" round actuator

8310-801 .............Ring, Weather 18 Weather Ring, 4-1/2" SquareOptional accessory. Can be used w/ any 4-1/2" square actuator

8310-802 .............Ring, Weather 18 Weather Ring, 6" RoundOptional accessory. Can be used w/ any 6" round actuator

8310-819F ...........Box Only, Jamb Mount 30 Jamb Box Only, 1-1/2" x 4-3/4" Rectangle, Flush MountOptional accessory. Should be used on an interior installation only. Can be used w/ any 1-1/2" x 4-3/4" jamb mount actuator

8310-819S...........Box Only, Jamb Mount 30 Jamb Box Only, 1-1/2" x 4-3/4", Rectangle, Surface MountOptional accessory. Should be used on an interior installation only. Can be used w/ any 1-1/2" x 4-3/4" jamb mount actuator

8310-867F ...........Box, Flush Mount 129 Box Only, 4-3/4" Square, Flush Mount Optional accessory. Can be used w/ any 4-3/4" square actuator

8310-867S...........Box, Surface Mount 129 Box Only, 4-3/4" Square, Surface Mount Optional accessory. Can be used w/ any 4-3/4" square actuator

8310-868F ...........Box, Flush Mount 116 Box Only, 4-1/2" Round, Flush Mount Optional accessory. Can be used w/ any 4-1/2" round actuator

8310-868S...........Box, Surface Mount 116 Box Only, 4-1/2" Round, Surface MountOptional accessory. Can be used w/ any 4-1/2" round actuator

8310-869F ...........Box, Flush Mount 125 Box Only, 6" Round, Flush Mount Optional accessory. Can be used w/ any 6" round actuator

8310-869S...........Box, Surface Mount 125 Box Only, 6" Round, Surface Mount Optional accessory. Can be used w/ any 6" round actuator

8310-874 .............Escutcheon 287 Escutcheon, 4-1/2" Round, Decorative, ProtectiveOptional accessory. Can be used w/ any 4-1/2" round actuator

8310-876 .............Escutcheon 287 Escutcheon, 6" Round, Decorative, ProtectiveOptional accessory. Can be used w/ any 6" round actuator


PRICE LIST



2012

8310-800

8310-819S

8310-867S

8310-868S

8310-869S

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876



March 2012

8310-802852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-8018310-800

8310-867S

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-867F

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-819F

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

8310-819S

8310-868F

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-868S

8310-874 8310-876

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-869F

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

8310-869S

852 852T

869F

844

865

3852WF

3853WS

852

844

3852TWF

3852TWS

869S

869F

852

8448697S

852T

852T

852WP 852TWP

802

802

802

844869F

802

8448697S

802

876

874

8310 Series Actuator Accessories



8310 Series Activation/Safety Sensors8310-804-1..........Sensor, Door Mount, $983 Door Mount Safety Sensor, Sensor with one element

Safety Used to sense obstruction(s) on leading edge of door

8310-804-2..........Sensor, Door Mount, 1,325 Door Mount Safety Sensor, Sensor with two elementsSafety Used to sense obstruction(s) on full face of door

8310-854 .............Sensor, Header Mount, 608 Header Mount Activation Sensor, 'K' BandActivation Technology

8310-877 .............Sensor, Header Mount, 1,161 Header Mount Safety Sensor, 'Diffused Infrared' TechnologySafety Provides 'safety function' during door open & door closed position.

Nine selectable/programmable patterns. Optional 8310-859 Handheld Remote Control can be used to program 8310-877 Sensor from a distance. Includes 8310-846 Harness.

8310 Series Activation/Safety Sensor Packages8310-3881L .........Sensor Package $3,718 Activation/Safety Sensor Package, Single Door, Basic Pack

Includes 8310-854 (2) Header Mount Activation Sensor, 8310-877 Header Mount Safety Sensor, 8310-877S Header Mount Spacer, 8310-804-2 Door Mount Safety Sensor, 8310-847 Harness

8310-3881 ...........Sensor Package 4,977 Activation/Safety Sensor Package, Single Door, Complete PackIncludes 8310-854 (2) Header Mount Activation Sensor, 8310-877 Header Mount Safety Sensor, 8310-877S Header Mount Spacer, 8310-847 Harness, 8310-804-2 (2) Door Mount SafetySensor

8310-3882L .........Sensor Package 5,060 Activation/Safety Sensor Package, Double Door, Basic PackIncludes 8310-854 (2) Header Mount Activation Sensor, 8310-877 Header Mount Safety Sensor, 8310-877S Header Mount Spacer, 8310-847 (2) Harness, 8310-804-2 (2) Door Mount Safety Sensor

8310-3882 ...........Sensor Package 7,577 Activation/Safety Sensor Package, Double Door, Complete PackIncludes 8310-854 (2) Header Mount Sensor, 8310-877 Header Mount Sensor, 8310-877S Header Mount Spacer, 8310-847 (2) Harness, 8310-804-2 (4) Door Mount Safety Sensor

8310-3883 ..........Sensor Package 1,172 Activation/Safety Sensor Package, Low Energy Convenience, Single Door. Includes 8310-804-1 Door Mount Safety Sensor, 8310-805C Door Position Switch (Concealed), 8310-845 Programmable Relay Module

8310-3891 ...........Sensor Package 6,422 Activation/Safety Sensor Package, Health Care I, Simultaneous PairIncludes 8310-877 Header Mount Sensor, 8310-877S Header Mount Spacer, 8310-804-2 (4) Door Mount Sensor, 8310-847 (2) Harness.

8310-3892 ...........Sensor Package 7,644 Activation/Safety Sensor Package, Health Care II, Independent Pair Includes 8310-877 (2) Header Mount Sensor, 8310-877S (2) Header Mount Spacer, 8310-804-2 (4) Door Mount Sensor, 8310-847 (2) Harness


PRICE LIST



2012

8310-804-1

8310-804-2

804-1

804-2

8310-854

8310-877


March 2012

8310-38928310-3891

8310-38828310-3881

8310-38838310-877

8310-8548310-804-1 8310-804-2

804-1

3883

845

804-1

805C

3891

877S

804-2 (4)

847 (2)

877

3881L

854 (2)

877

877S

804-2 (2)

847

3882

854 (2)

804-2 (4)

847 (2)877877S

3892

877 (2)

877S (2)

804-2 (4)

847 (2)

804-2

8310 Series Activation/Safety Sensor Packages

8310-3882L8310-3881L

3881L

854 (2)

877

877S

804-2

847

3882L

854 (2)

877

877S

804-2 (2)

847 (2)




8310 Series Activation/Safety Sensor Accessories8310-805 ........Switch, Door Position $43 Switch, Door Position, Surface Mount.

Used when 8310-804-1 Surface Mount or 8310-804-2 DoorMounted Safety Sensor is installed in conjunction w/ either a 4630 or 4640 Series Automatic Operator. Disables approach side sensor when door is closed

8310-805C .....Switch, Door Position 43 Switch, Door Position, Concealed. Used when 8310-804-1 Concealed or 8310-804-2 Door Mounted Safety Sensor is installed in conjunction w/ either a 4630 or 4640 Series Automatic Operator. Disables approach side sensor when door is closed

8310-824 ........Transformer 62 Transformer, 24v, Hardwired. Optional accessory - Used to remotely power any 24v sensor/receiver

8310-824P .....Transformer 62 Transformer, 24v, Plug In. Optional accessory - Used to remotely power any 24v sensor/receiver

8310-846 ........Harness, Header Mount 22 Harness, Header Mount. Used w/ 8310-877 Header Mount Safety Sensor

8310-847 .......Harness, Door Mount 87 Harness, Door Mount. Used w/ 8310-804-1 or 8310-804-2 Door Mount Safety Sensor

8310-854ECA..Bracket, Drop Ceiling 160 Bracket, Drop Ceiling. Optional bracket used w/ 8310-854 Header Mount Activation Sensor

8310-854ERA...Cover, Protective 107 Cover, Protective Optional cover used w/ 8310-854 Header Mount Activation Sensor

8310-859 ........Remote, Handheld 134 Remote Control, Handheld. Optional handheld remote that can be used to program 8310-877 Header Mount Safety Sensor or 8310-854 Header Mount Motion Sensor

8310-877S......Spacer, Header Mount 125 Header Mount Safety Sensor Spacer. Required when 8310-804-1 or 8310-804-2 Door Mount Safety Sensors are used w/ 8310-877 Header Mount Safety Sensor

8310-3803 ......Conversion Kit, Wireless, 443 Wireless Conversion Kit, Jamb Mount, 3vJamb Mount Converts standard jamb actuator to wireless version

Requires 8310-819 Jamb Box - Includes 8310-865 Receiver, 8310-844J (2) Jamb Mounted Transmitter Kit

8310-3809 ......Conversion Kit, Wireless, 443 Wireless Conversion Kit, Wall Mount, 9vWall Mount Converts standard wall mount actuator to wireless version

Requires Surface Box & Weather Ring - Includes 8310-865 Receiver, 8310-844 (2) Wall Mount Transmitter Kit

8310-3888 ......Harness, Safety Module 28 Harness, Safety Module, Service Part.Safety Module Harness included in 8310-3889 Safety Module & Kit

8310-3889 ......Safety Module Kit 400 Safety Module & KitUsed w/ 7901, 7902, 7981, 7982 Control Boxes. Includes 8310-3888 Safety Module Harness, 8310-845 Time Delay Relay. Required when 8310-877 Header Mount Safety Sensor is used w/ PneumaticAutomatic Operators (2610, 4810, 4820 or 4840 Series)


PRICE LIST


PRODUCT NUMBER DESCRIPTION

LIST PRICE PRODUCT DESCRIPTION


March 2012

8310-824

8310-859

854ECA

8310-854ECA

854ERA

8310-854ERA



8310-805 8310-805C 8310-824 8310-824P

8310-846 8310-847 8310-854ECA 8310-854ERA

8310-859 8310-877S

8310-3803 8310-3809

8310-3888 8310-3889

March 2012

854ECA

854ERA

865 844J (2)

3803

865 844 (2)

3809

8310 Series Activation/Safety Sensor Packages



8310 Series Actuators, Sensors & Accessories8310-844 ........Transmitter Kit, $153 Transmitter, Wireless, 1 Channel, Wall Mount, 9v

Wall Mount Used to convert standard wall mount actuator towireless. Requires 8310-865 Receiver

8310-844J ......Transmitter Kit, 153 Transmitter, Wireless, 1 Channel, Jamb Mount, 3vJamb Mount Used to convert standard jamb mount actuator to

wireless. Requires 8310-865 Receiver

8310-861 ........Transmitter, Handheld 153 Transmitter, Wireless, 1 Channel, Handheld, 9vRequires 8310-865 Receiver

8310-862 ........Transmitter, Handheld 153 Transmitter, Wireless, 2 Channel, Handheld, 9vRequires at least one 8310-865 Receiver



8310-865 ........Receiver 160 Receiver, Wireless, 1 Channel, Sequencing FeatureUsed in conjunction w/ Wireless Actuators & Transmitters

8310 Series Bollard Posts, Bollard Post Actuators & Accessories8310-866...................Post, Bollard $703 42" x 4" x 6" Bollard Post, Mounting Base, Actuator Cut-Out

Requires 8310-3853WB Bollard Actuator or 8310-3853TWB Bollard Actuator. Can be used w/ 8310-853 Wall Mount Actuator, 8310-853T Wall Mount Actuator or 8310-855 Wall Mount Actuator. Includes 8310-866CAP. Available in AL or DKBRZ (please specify).

8310-866CAP ..........Cap 115 Plastic Cap, Protective Cover, Service Part. Formed plastic cap for 8310-866 Bollard Post

8310-3853WB...........Actuator, Bollard 332 4-3/4" Square w/ Logo, Wireless. For use w/ 8310 866 Bollard Post. Includes 8310-853 Actuator, 8310-844 Transmitter Kit. Requires 8310-865 Receiver.

8310-3853TWB............Actuator, Bollard 332 4-3/4" Square w/ Logo, Text, Wireless.For use w/ 8310-866 Bollard Post. Includes 8310-853TActuator, 8310-844 Transmitter Kit. Requires 8310-865 Receiver.

8310-865 .................Receiver 160 Receiver, Wireless, 1 Channel, Sequencing FeatureUsed in conjunction w/ Wireless Actuators & Transmitters


PRICE LIST



LIST PRICE PRODUCT DESCRIPTION March 2012

8310-844

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

8310-861

8310-866

8310-865



March 2012

8310-844

844

8310-3853WB

8310-3853TWB

8310-844J 8310-865 8310-866CAP

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

844

856 856T

868F

844

865

3856WF

800

3856WS

856

844

3856TWF

3856TWS

868S

868F

856

844868S

856T

844868F

856T

844868S

800

800

800

800

874

3860T

856T (2) 868S (2)

3860TW

856T (2) 868S (2)800 (2)

844 (2)

865

818 818T

819S

Missing819F

844J

865

3818WF

Missing819F

3818WS

818

818 819S 844J

844J

3818TWF

3818TWS

818T

818T819S

844J

844J

Missing819F

818T (2)

3822T

819S (2)

3822TW

818T (2) 819S (2)

844J (2)

865

8310-866

8310 Series Actuators, Sensors & Accessories

853

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

853T

853 853T

867F

844

865

3853WF

Missing801

3853WS

853

844

3853TWF

3853TWS

867S

867F

Missing801

853

844867S

Missing801

853T

844867F

Missing801

853T

844868S

853WP 853TWP

Missing801

3857T

853T (2)

867S (2)

3857TW

853T (2)

867S (2)

Missing801 (2)

865

844 (2)

8310-861 8310-862 8310-863 8310-864

8310 Series Accessories8310-806K......Switch, Key $162 Switch, Key Type, 3 Position (On/Off/Hold-Open)

Optional switch used w/ Senior Swing, Benchmark, or 4630/4640 Operators with (CS) option

8310-806R......Switch, Rocker 162 Switch, Rocker Type, 3 Position (On/Off/Hold-Open)Optional switch w/ Senior Swing or Benchmark Operators.

8310-807 ........Filter, Line 162 Line Filter, AC, 120v. Optional filter used w/ Senior Operators to reduce 'line noise'.

8310-845 ........Relay and Door Sequencer 250 Programmable Relay and Door Sequencer Used to coordinate electric locking Programable device release for Senior Swing, also functions as door sequencer. Operator manufactured prior to 9/06.Also, is a component to the 8310-8337 Low Energy Convenience Package

8310-887 ........Cable Assembly, Retrofit 17 Retrofit CableAllows newer style Senior Swing digital control to be activated by existing switches when replacing older control purchased prior to September 2006.

8310-3134 ......Cable Kit, Retrofit 260 Retrofit Cable KitAllows newer style Senior Swing digital control to be activated by existing switches when replacing older control purchased prior to September 2006. Also includes cables to allow Safety Sensors to activate. Includes 8310-887 plus Safety Sensor Cables.


PRICE LIST



LIST PRICE PRODUCT DESCRIPTION


March 2012




8310-806K


8310-806R 8310-807

8310-845 8310-887 8310-3134

March 2012

8310 Series Accessories



SEM7800 SeriesSEM7810-E050.........................Extension 1/2" $19.00SEM7810-E075.........................Extension 3/4" 25.00SEM7810-E100 ............................Extension 1" 29.00SEM7810-E200 ............................Extension 2" 35.00SEM7810-E400 ............................Extension 4" 39.00SEM7810-514...........Ball Pivot/Connection Link 29.00SEM7820-515...................................Fastener Kit 58.00SEM7820-72..................Standard Cover & Base 434.00SEM7820-825 ..............................Door Armature 114.00SEM7820-516................Magnet Core Assembly 158.00SEM7830-515...................................Fastener Kit 21.00SEM7830-72...............................Standard Cover 88.00SEM7830-268 ......................Surface Mount Box 32.00SEM7830-516................Magnet Core Assembly 146.00SEM7830-825 ..............................Door Armature 114.00SEM7840-515...................................Fastener Kit 21.00SEM7840-72...............................Standard Cover 88.00SEM7840-516................Magnet Core Assembly 146.00SEM7840-825 ..............................Door Armature 114.00SEM7850-515 .................Fastener Kit & Bracket 21.00SEM7850-516................Magnet Core Assembly 146.00SEM7850-72...............................Standard Cover 88.00SEM7850-828 ..............................Door Armature 165.00

SEM1900 SeriesSEM1960-515...................................Fastener Kit $21.00SEM1960-72...............................Standard Cover 73.00SEM1960-516................Magnet Core Assembly 146.00SEM1960-825 ..............................Door Armature 89.00SEM1970-515...................................Fastener Kit 21.00SEM1970-72...............................Standard Cover 73.00SEM1970-516................Magnet Core Assembly 146.00SEM1970-825 ..............................Door Armature 89.00SEM1980-515...................................Fastener Kit 21.00SEM1980-72...............................Standard Cover 73.00SEM1980-516................Magnet Core Assembly 146.00SEM1980-828 ..............................Door Armature 131.00

1260 Series1261-3071............................Std Cylinder Assy $156.001260-3077 ..........................................Reg Arm 74.001260-3077/PA .......................Reg Arm w/62PA 79.001260-3077/62A .......................Reg Arm w/62A 94.001260-3077L.......................................Long Arm 74.001260-3049 ...............................Hold Open Arm 99.001260-3049/PA ............Hold Open Arm w/62PA 104.001260-3049L ....................Hold Open Long Arm 99.001260-3077EDA...................................EDA Arm 99.001260-3077EDA/G...................EDA Arm w/62G 99.001260-3049EDA................................HEDA Arm 130.001260-3049EDA/G ................HEDA Arm w/62G 130.001260-3077CUSH ............................CUSH Arm 130.001260-3049CUSH..........................HCUSH Arm 180.001260-72 ...................................Standard Cover 10.001260-SRT ......................................Screw Pack 17.001260-TBSRT..................................Screw Pack 17.001260-WMS ....................................Screw Pack 17.001260-TBWMS................................Screw Pack 17.001260-TORX....................................Screw Pack 21.001260-TBTRX..................................Screw Pack 21.001260-18 ....................................................Plate 43.001260-18PA................................................Plate 43.001260-18QF ...............................................Plate 43.001260-30 ............................Cush Shoe Support 20.001260-37 ..................................Hold Open Stud 23.001260-41 ....................................Hold Open Nut 6.301260-45 .................................Hold Open Shoe 21.001260-49 ..........................Hold Open Main Arm 56.00


BLACK (693)


BLACK (693)

partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER

COATFINISHES US26D US 3 US 10B

US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


PLATED FINISHESSTANDARDPOWDER

COATFINISHES

1260-61.................................................Spacer $22.001260-62A ...................................Auxiliary Shoe 38.001260-62PA ..........................................PA Shoe 12.001260-77....................................Arm & Forearm 73.001260-78H .................................H Head & Tube 64.001260-78HL..........................Head & Long Tube 64.001260-79.........................................Rod & Shoe 24.001260-79LR ...........................Long Rod & Shoe 24.001260-83...........................................Arm Screw 2.401260-83H ....................................H Arm Screw 2.401260-146 .......................................Shaft Cover 2.401260-159.........................................Arm Screw 2.401260-201...............................................Spacer 3.501260-384...................................................Stop 18.001260-419....................................Panel Adapter 53.001260-3048...........................Head & Tube Assy 72.001260-3048L ...............Head & Long Tube Assy 72.001260-Flat Box........................Flat Box w/Label 4.001260-Instruction Sheet..........Instruction Sheet 3.001260-Rebox Kit ..........Box & Instruction Sheet 5.00

1460 Series1461-3071............................Std Cylinder Assy $210.001461-3071DEL..........Del Action Cylinder Assy 240.001460-3077 ..........................................Reg Arm 74.00 $185.00 $220.001460-3077/PA .......................Reg Arm w/62PA 79.00 245.00 300.001460-3077/62A .......................Reg Arm w/62A 94.00 260.00 315.001460-3077HD.........................Heavy Duty Arm 93.00 233.00 272.001460-3077HD/PA ...................HD Arm w/62PA 98.00 293.00 352.001460-3077HD/62A....................HD Arm w/62A 113.00 308.00 367.001460-3077HD/L ..........................HD Long Arm 93.00 233.00 272.001460-3077L.......................................Long Arm 74.00 185.00 220.001460-3049 ...............................Hold Open Arm 99.00 265.00 289.001460-3049/PA ...........................H Arm w/62PA 104.00 325.00 369.001460-3049L...................................H Long Arm 99.00 265.00 289.001460-3077EDA...................................EDA Arm 99.00 284.00 325.001460-3077EDA/G...................EDA Arm w/62G 99.00 284.00 325.001460-3049EDA...............................H EDA Arm 130.00 332.00 387.001460-3049EDA/G ...............H EDA Arm w/62G 130.00 332.00 387.001460-3077CNS.................................Cush Arm 130.00 332.00 387.001460-3049CNS .............................H Cush Arm 180.00 377.00 444.001460-3077SCNS ...........................S Cush Arm 259.00 408.00 471.001460-3049SCNS ...............Spring H Cush Arm 295.00 470.00 532.001460-72 ...................................Standard Cover 20.001460-72DS1 .................Designer Series Cover 45.00 165.00 200.001460-72FC .......................................Full Cover 23.001460-SRT ......................................Screw Pack 17.00 39.00 54.001460-TBSRT..................................Screw Pack 17.00 39.00 54.001460-WMS ....................................Screw Pack 17.00 39.00 54.001460-TBWMS................................Screw Pack 17.00 39.00 54.001460-TORX....................................Screw Pack 21.00 54.00 67.001460-TBTRX..................................Screw Pack 21.00 54.00 67.001460-18 ....................................................Plate 52.001460-18DS ...............................................Plate 52.00 181.00 219.001460-18FC................................................Plate 52.001460-18PA................................................Plate 52.001460-18PADS ...........................................Plate 52.00 181.00 219.001460-18PAFC ...........................................Plate 52.001460-30 ............................Cush Shoe Support 20.00 60.00 73.001460-30A .............................Mounting Bracket 3.301460-37 ..................................Hold Open Stud 23.001460-41 ....................................Hold Open Nut 6.301460-45 .................................Hold Open Shoe 21.001460-49 ..........................Hold Open Main Arm 56.001460-61.................................................Spacer 22.00 62.00 75.001460-62A ...................................Auxiliary Shoe 38.00 95.00 110.001460-62PA ..........................................PA Shoe 12.00 81.00 96.001460-77....................................Arm & Forearm 73.001460-77HD ...........Heavy Duty Arm & Forearm 92.001460-78H .................................H Head & Tube 64.001460-78HL..........................Head & Long Tube 64.00

1460 Series continued on next page




BLACK (693)


BLACK (693)

partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER


US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES



COATFINISHES

1460-79.........................................Rod & Shoe $24.00 $80.00 $115.001460-79LR ...........................Long Rod & Shoe 48.00 104.00 139.001460-83...........................................Arm Screw 2.401460-83H ....................................H Arm Screw 2.401460-124 ...................................................Plug 2.401460-146 .......................................Shaft Cover 2.401460-159.........................................Arm Screw 2.401460-163..........................................Arm Insert 2.401460-201...............................................Spacer 3.501460-384...................................................Stop 18.001460-419....................................Panel Adapter 53.00 141.00 156.001460-3048...........................Head & Tube Assy 72.001460-3048L ...............Head & Long Tube Assy 72.001460-3080 ..........................Spring Cush Block 52.001460-3373 ......................................Adapter Kit 2.701460-Flat Box........................Flat Box w/Label 4.001460-Instruction Sheet..........Instruction Sheet 3.001460-Rebox Kit ..........Box & Instruction Sheet 5.00

1460T Series1460T-3071 ..........................Std Cylinder Assy $210.001461T-3071 ..........................Std Cylinder Assy 210.001460T-3077T ..............................Standard Arm 71.00 $178.00 $220.001460T-3038 ..............................Standard Track 50.001460T-3038B..........................Track w/Bumper 60.001460T-3038H .....................Track w/Hold Open 70.001460T-3038HB .Track w/Hold Open & Bumper 80.001460T-72 .................................Standard Cover 20.001460T-72DS1................Designer Series Cover 45.00 165.00 200.001460T-72FC......................................Full Cover 23.001460T-SRT..................Screw Pack (incl -3034) 34.00 54.00 67.001460T-TBSRT .............Screw Pack (incl -3034) 34.00 54.00 67.001460T-WMS................Screw Pack (incl -3034) 34.00 54.00 67.001460T-TBWMS ...........Screw Pack (incl -3034) 34.00 54.00 67.001460T-TORX ...............Screw Pack (incl -3034) 38.00 67.00 81.001460T-TBTRX .............Screw Pack (incl -3034) 38.00 67.00 81.001460T-18...................................................Plate 52.001460T-18DS..............................................Plate 52.00 181.00 219.001460T-18FC ..............................................Plate 52.001460T-18GFC ...........................................Plate 52.001460T-18PA ..............................................Plate 52.001460T-18PADS .........................................Plate 52.00 181.00 219.001460T-18PAFC..........................................Plate 52.001460T-30A............................Mounting Bracket 3.301460T-73.............................................End Cap 7.301460T-78........................................Arm & Tube 64.001460T-82 ....................................................Rod 53.001460T-83H...................................H Arm Screw 2.401460T-141-1 ..............................................Plug 2.401460T-141-2 ..............................................Plug 2.401460T-146......................................Shaft Cover 2.401460T-159 .......................................Arm Screw 2.401460T-163 ........................................Arm Insert 2.401460T-169 ...................................Bumper Assy 18.001460T-425 ...........................Roller Lock Screw 3.501460T-3034....................................Track Roller 15.001460T-3054..............................Hold Open Clip 30.001460T-Flat Box ......................Flat Box w/Label 4.001460T-Instruction Sheet ........Instruction Sheet 3.001460T-Rebox Kit.........Box & Instruction Sheet 5.00

2010 Series2011(3,4,5,6)-3071...............Std Cylinder Assy $345.002010-3077T................................Standard Arm 83.00 $237.00 $282.002010-3038................................Standard Track 50.002010-3038B ...........................Track w/Bumper 60.002010-3038H.......................Track w/Hold Open 70.002010-3038HB...Track w/Hold Open & Bumper 80.00

2010-WMS .................Screw Pack (incl -3034) $34.00 $54.00 $67.002010-TORX.................Screw Pack (incl -3034) 38.00 67.00 81.002010-11..........................................Finish Plate 41.00 166.00 217.002010-31........................................Cover Screw 2.40 4.80 7.302010-159.........................................Arm Screw 2.402010-169.....................................Bumper Assy 18.002010-420 .........................................Fire Shield 53.002010-425 .............................Roller Lock Screw 3.502010-3034 .....................................Track Roller 15.002010-3054 ...............................Hold Open Clip 30.002010-SPL-3034 ..........................P-1152 Roller 37.002010-SPL-3038...........................P-1224 Track 68.002010-Flat Box........................Flat Box w/Label 4.002010-Instruction Sheet..........Instruction Sheet 3.002010-Rebox Kit ..........Box & Instruction Sheet 5.00

2030 Series2031(2,3,4,5)-3071...............Std Cylinder Assy $730.00 $947.00 $1,009.002031(2,3,4,5)-3971......................Cylinder Only 660.002030-3077T................................Standard Arm 92.00 250.00 292.002030-3038................................Standard Track 50.002030-3038B ...........................Track w/Bumper 60.002030-3038H.......................Track w/Hold Open 70.002030-3038HB...Track w/Hold Open & Bumper 80.002030-WMS .................Screw Pack (incl -3034) 34.00 54.00 67.002030-TORX.................Screw Pack (incl -3034) 38.00 67.00 81.002030-159.........................................Arm Screw 2.402030-169.....................................Bumper Assy 18.002030-416 ...................................Wood Clip Set 139.00 201.00 252.002030-417 ...................................Wood Clip Set 139.00 201.00 252.002030-420 .........................................Fire Shield 53.002030-425 .............................Roller Lock Screw 3.502030-3002 .....................Mounting/Finish Plate 131.00 258.00 306.002030-3034 .....................................Track Roller 15.002030-3054 ...............................Hold Open Clip 30.002030-SPL-3034 ..........................P-1152 Roller 37.002030-SPL-3038...........................P-1224 Track 68.002030-Flat Box........................Flat Box w/Label 4.002030-Instruction Sheet..........Instruction Sheet 3.002030-Rebox Kit ..........Box & Instruction Sheet 5.00

2210 Series2213(4,5)-3071.....................Std Cylinder Assy $486.002213(4,5)-3071AVB.............AVB Cylinder Assy 501.002210-3077T................................Standard Arm 107.00 $286.00 $319.002210-72 ............................Finish Plate (11&12) 50.00 180.00 220.002210-3038................................Standard Track 80.002210-TORX....................................Screw Pack 21.00 54.00 67.002210-11..........................................Finish Plate 28.00 97.00 116.002210-12................................Short Finish Plate 25.00 93.00 113.002210-31........................................Cover Screw 2.402210-159.........................................Arm Screw 2.402210-3034 .....................................Track Roller 20.002210-Flat Box........................Flat Box w/Label 4.002210-Instruction Sheet..........Instruction Sheet 3.002210-Rebox Kit ..........Box & Instruction Sheet 5.00

2210DPS Series2213(4,5)DPS-3071..............Std Cylinder Assy $579.002213(4,5)DPS-3071AVB......AVB Cylinder Assy 594.002210DPS-3077T.........................Standard Arm 107.00 $286.00 $319.002210DPS-72 .....................Finish Plate (11&12) 50.00 180.00 220.002210DPS-3038.........................Standard Track 80.002210DPS-TORX.............................Screw Pack 21.00 54.00 67.002210DPS-11...................................Finish Plate 28.00 97.00 116.002210DPS-12.........................Short Finish Plate 25.00 93.00 113.002210DPS-31 ................................Cover Screw 2.402210DPS-159 .................................Arm Screw 2.40

1460 Series continued

2210DPS Series continued on next page



2210DPS-493...............................DPS Test Kit $65.002210DPS-3034 ..............................Track Roller 20.002210DPS-3340............................Wire Harness 65.002210DPS-Flat Box.................Flat Box w/Label 4.002210DPS-Instruction Sheet ..Instruction Sheet 3.002210DPS-Rebox Kit ...Box & Instruction Sheet 5.00

2310ME Series2314ME-3071 ......................Std Cylinder Assy $787.002314ME-3071B80...............B80 Cylinder Assy 882.002314ME-3071B140 ...........B140 Cylinder Assy 882.002314ME-3971 .............................Cylinder Only 735.002314ME-3971B80 ...............B80 Cylinder Only 830.002314ME-3971B140 ...........B140 Cylinder Only 830.002310ME-3077T...........................Standard Arm 83.00 $237.00 $282.002310ME-72 .......................Finish Plate (11&12) 50.00 180.00 220.002310ME-3038...........................Standard Track 50.002310ME-WMS ............Screw Pack (incl -3034) 34.00 54.00 67.002310ME-TORX ...........Screw Pack (incl -3034) 38.00 67.00 81.002310ME-11 ....................................Finish Plate 28.00 97.00 116.002310ME-12...........................Short Finish Plate 25.00 93.00 113.002310ME-31 ..................................Cover Screw 2.402310ME-159 ...................................Arm Screw 2.402310ME-172 ................................Wiring Cover 7.302310ME-420 ....................................Fire Shield 53.002310ME-425........................Roller Lock Screw 3.502310ME-3034 ................................Track Roller 15.002310ME-3431..............................Input Jumper 5.202310ME-3351.........................ME Switch Assy 77.002310ME-Flat Box ..................Flat Box w/Label 4.002310ME-Instruction Sheet ....Instruction Sheet 3.002310ME-Rebox Kit .....Box & Instruction Sheet 5.00

2610 Series2613(4)-3071........................Std Cylinder Assy $1,464.00 $1,606.00 $1,648.002613(4)-3971...............................Cylinder Only 1,394.002610-3077T................................Standard Arm 81.00 231.00 275.002610-3038................................Standard Track 50.002610-WMS .................Screw Pack (incl -3034) 34.00 54.00 67.002610-61.................................................Spacer 11.002610-78..........................................Arm & Tube 64.00 160.00 219.002610-82......................................................Rod 53.00 122.00 151.002610-83H ....................................H Arm Screw 2.402610-155-1 ................................Caution Decal 5.202610-155-2.............................Activation Decal 5.202610-159.........................................Arm Screw 2.402610-425 .............................Roller Lock Screw 3.502610-3002 .....................Mounting/Finish Plate 131.00 258.00 306.002610-3034 .....................................Track Roller 15.002610-Flat Box........................Flat Box w/Label 4.002610-Instruction Sheet..........Instruction Sheet 3.002610-Rebox Kit ..........Box & Instruction Sheet 5.00

2810 Series - (ANCLR or ANDKB only)2810-3077CP........................Center Pivot Arm $240.002810-3077OP ................Offset/Butt Hung Arm 210.002810-3077OPCM*..........Offset Arm w/Track & 402.00

................................................Conc Channel2810-3572HL*................................Header Asy 726.002810-3572HL/S* .......Header Asy w/Stop Prep 726.002810-3572DD*..........Double Door Header Asy 943.002810-3572DD/S* ......Double Door Header Asy 943.00

...................................................w/Stop Prep2810-MS........................................Screw Pack 20.002810-11A .......................Spindle Plate - 2 3/4" 69.002810-11B .......................Spindle Plate - 3 3/4" 69.002810-12* ................................Blank Filler Plate 83.002810-78..........................................Arm & Tube 183.00

April 2010

partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER


US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


COATFINISHES


BLACK (693)

2860 Series continued on next page*Require length - please note when ordering

2810-82......................................................Rod $106.002810-107.........................................Pivot Body 61.002810-110..........................................Pivot Post 48.002810-117 ............................Bottom Pivot Plate 48.002810-168 ..................................................Slide 36.002810-275 ................Mounting Bracket - 2 3/4" 92.002810-334 ...............................Header Endcaps 40.002810-334-2.........................................End Cap 69.002810-375 ................Mounting Bracket - 3 3/4" 92.002810-384B ....................Breakaway Door Stop 139.002810-384F..............................Fixed Door Stop 66.002810-511* ..............Dress Plate Extrusion Only 15.00 / ft2810-518................................Cable/Parts Bag 83.002810-572*.....................Header Extrusion Only 45.00 / ft2810-572HL* ................................Header Only 382.002810-572HL/S*........Header Only w/Stop Prep 382.002810-572DD* ..........Double Door Header Only 527.002810-572DD/S*.......Double Door Header Only 527.00

...................................................w/Stop Prep2810-3018........................Rear Mount Bracket 92.002810-3072*.......................Concealing Channel 202.002810-3107 ..................Bottom Pivot Assembly 144.002810-3155 ..........................................Label Kit 24.002810-3454 .............Motor Gearbox (Std Force) 2,233.002810-3462.........................................Controller 1,439.00


................................................Conc Channel2850-3572HL*................................Header Asy 943.002850-3572HL/S* .......Header Asy w/Stop Prep 943.002850-MS........................................Screw Pack 20.002850-11A .......................Spindle Plate - 2 3/4" 69.002850-11B .......................Spindle Plate - 3 3/4" 69.002850-12* ................................Blank Filler Plate 83.002850-78..........................................Arm & Tube 183.002850-82......................................................Rod 106.002850-107.........................................Pivot Body 61.002850-110..........................................Pivot Post 48.002850-117 ............................Bottom Pivot Plate 48.002850-168 ..................................................Slide 36.002850-275 ................Mounting Bracket - 2 3/4" 92.002850-334 ...............................Header Endcaps 40.002850-334-2.........................................End Cap 69.002850-375 ................Mounting Bracket - 3 3/4" 92.002850-384B ....................Breakaway Door Stop 139.002850-384F..............................Fixed Door Stop 66.002850-511* ..............Dress Plate Extrusion Only 15.00 / ft2850-518................................Cable/Parts Bag 83.002850-572*.....................Header Extrusion Only 45.00 / ft2850-572HL* ................................Header Only 527.002850-572HL/S*........Header Only w/Stop Prep 527.002850-982 .............................Companion Cable 62.002850-3018........................Rear Mount Bracket 92.002850-3072*.......................Concealing Channel 202.002850-3107 ..................Bottom Pivot Assembly 144.002850-3155 ..........................................Label Kit 24.002850-3454 .............Motor Gearbox (Std Force) 2,233.002850-3462.........................................Controller 1,439.00


................................................Conc Channel2860-3572HL*................................Header Asy 943.002860-3572HL/S* .......Header Asy w/Stop Prep 943.002860-MS........................................Screw Pack 20.00

2210DPS Series continued



*Require length - please note when ordering 4010 Series continued on next page


BLACK (693)


BLACK (693)

partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER


US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES



COATFINISHES

2860-11A .......................Spindle Plate - 2 3/4" $69.002860-11B .......................Spindle Plate - 3 3/4" 69.002860-12* ................................Blank Filler Plate 83.002860-78..........................................Arm & Tube 183.002860-82......................................................Rod 106.002860-107.........................................Pivot Body 61.002860-110..........................................Pivot Post 48.002860-117 ............................Bottom Pivot Plate 48.002860-168 ..................................................Slide 36.002860-275 ................Mounting Bracket - 2 3/4" 92.002860-334 ...............................Header Endcaps 40.002860-334-2.........................................End Cap 69.002860-384B ....................Breakaway Door Stop 139.002860-384F..............................Fixed Door Stop 66.002860-511* ..............Dress Plate Extrusion Only 15.00 / ft2860-518................................Cable/Parts Bag 83.002860-572*.....................Header Extrusion Only 45.00 / ft2860-572HL* ................................Header Only 527.002860-572HL/S*........Header Only w/Stop Prep 527.002860-3018........................Rear Mount Bracket 92.002860-3072*.......................Concealing Channel 202.002860-3107 ..................Bottom Pivot Assembly 144.002860-3155 ..........................................Label Kit 24.002860-3454 .............Motor Gearbox (Std Force) 2,233.002860-3462 .....................................Control Box 1,439.00

3030 Series3031(2,3,4)-3071..................Std Cylinder Assy $269.003030-3077 ..........................................Reg Arm 113.00 $270.00 $316.003030-3049 ...............................Hold Open Arm 164.00 323.00 368.003030-WMS ....................................Screw Pack 17.00 39.00 54.003030-TORX....................................Screw Pack 21.00 54.00 67.003030-32...........................................Arm Screw 2.403030-37 ..................................Hold Open Stud 23.003030-41 ....................................Hold Open Nut 6.30 33.00 47.003030-48 ............................Hold Open Forearm 60.00 120.00 152.003030-49 ..........................Hold Open Main Arm 56.00 138.00 146.003030-77....................................Arm & Forearm 73.003030-79.........................................Rod & Shoe 24.00 80.00 115.003030-79H...................................H Rod & Shoe 24.00 80.00 115.003030-83...........................................Arm Screw 2.403030-83H ....................................H Arm Screw 2.403030-159.........................................Arm Screw 2.403030-421 ...........................................Arm Stud 8.303030-Flat Box........................Flat Box w/Label 4.003030-Instruction Sheet..........Instruction Sheet 3.003030-Rebox Kit ............Box, Inst., & Screw Pk 5.00

3130 Series3131(2,3)-3071.....................Std Cylinder Assy $269.003130-3077T................................Standard Arm 88.00 $259.00 $305.003130-3038................................Standard Track 50.003130-3038B ...........................Track w/Bumper 60.003130-3038H.......................Track w/Hold Open 70.003130-3038HB...Track w/Hold Open & Bumper 80.003130-WMS .................Screw Pack (incl -3034) 34.00 54.00 67.003130-TORX.................Screw Pack (incl -3034) 38.00 67.00 81.003130-2 .................................................Channel 8.303130-32...........................................Arm Screw 2.403130-159.........................................Arm Screw 2.403130-169.....................................Bumper Assy 18.003130-425 .............................Roller Lock Screw 3.503130-3034 .....................................Track Roller 15.003130-3054 ...............................Hold Open Clip 30.003130-Flat Box........................Flat Box w/Label 4.003130-Instruction Sheet..........Instruction Sheet 3.003130-Rebox Kit ..........Box & Instruction Sheet 5.00

3130SE Series3133(4)SE-3071 ...................Std Cylinder Assy $269.003130SE-3077T ...........................Standard Arm 87.00 $257.00 $303.003130SE-3077L ..................................Long Arm 87.00 257.00 303.003130SE-3038 ...........................Standard Track 300.003130SEL-3038SEL .........................Long Track 300.003130SE-WMS................Screw Pack (incl. -81) 17.00 39.00 54.003130SE-TORX ...............Screw Pack (incl. -81) 21.00 54.00 67.003130SE-32 ......................................Arm Screw 2.403130SE-59A...................................Cover Plate 4.803130SE-60..........................Cover Plate Screw 2.403130SE-73..........................................End Cap 7.303130SE-78 .....................................Arm & Tube 64.00 160.00 219.003130SE-81...........................Connector w/Ring 4.603130SE-82 .................................................Rod 53.00 122.00 151.003130SE-83H................................H Arm Screw 2.403130SE-159 ....................................Arm Screw 2.403130SE-168.............................................Slider 6.203130SE-425 ........................Roller Lock Screw 3.503130SE-3034.................................Track Roller 15.003130SE-3436 .....................On/off Switch Assy 64.003130SE-Flat Box ...................Flat Box w/Label 4.003130SE-Instruction Sheet .....Instruction Sheet 3.003130SE-Rebox Kit......Box & Instruction Sheet 5.00

4000T Series4003(4)T-3071 ......................Std Cylinder Assy $289.004000T-3077T ..............................Standard Arm 87.00 $201.00 $251.004000T-3038 ..............................Standard Track 50.004000T-72 .................................Standard Cover 20.004000T-72MC .................................Metal Cover 25.00 175.00 210.004000T-WMS................Screw Pack (incl -3034) 34.00 54.00 67.004000T-TBWMS ...........Screw Pack (incl -3034) 34.00 54.00 67.004000T-TORX ...............Screw Pack (incl -3034) 38.00 67.00 81.004000T-TBTRX .............Screw Pack (incl -3034) 38.00 67.00 81.004000T-31 ......................................Cover Screw 2.40 4.80 7.304000T-61 ...............................................Spacer 11.004000T-73.............................................End Cap 7.304000T-141-2 ..............................................Plug 2.404000T-159 .......................................Arm Screw 2.404000T-163 ........................................Arm Insert 2.404000T-164.....................................Screw Insert 2.404000T-425 ...........................Roller Lock Screw 3.504000T-3034....................................Track Roller 15.004000T-Flat Box ......................Flat Box w/Label 4.004000T-Instruction Sheet ........Instruction Sheet 3.004000T-Rebox Kit.........Box & Instruction Sheet 5.00

4010 Series4011(6)-3071........................Std Cylinder Assy $279.004011-3071DEL.......................Del Act Cyl Assy 309.004011(6)-3071TEL.................TEL Cylinder Assy 309.004010-3077 ..........................................Reg Arm 109.00 $308.00 $387.004010-3049 ...............................Hold Open Arm 155.00 361.00 444.004010-3049FL.........................................FL Arm 222.004010-72 ...................................Standard Cover 20.004010-72MC ...................................Metal Cover 25.00 175.00 210.004010-SRT ......................................Screw Pack 17.00 39.00 54.004010-TBSRT..................................Screw Pack 17.00 39.00 54.004010-WMS ....................................Screw Pack 17.00 39.00 54.004010-TBWMS................................Screw Pack 17.00 39.00 54.004010-TORX....................................Screw Pack 21.00 54.00 67.004010-TBTRX..................................Screw Pack 21.00 54.00 67.004010-18 ....................................................Plate 52.00 181.00 219.004010-28 .........................................Fusible Link 9.604010-31........................................Cover Screw 2.40 4.80 7.304010-37 ..................................Hold Open Stud 23.004010-37FL .........................FL Hold Open Stud 23.00




partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER


US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


PLATED FINISHES


BLACK (693)

STANDARDPOWDER

COATFINISHES


BLACK (693)

4010-41 ....................................Hold Open Nut $6.30 $33.00 $47.004010-45 .................................Hold Open Shoe 21.00 52.00 66.004010-48 ............................Hold Open Forearm 60.00 120.00 152.004010-49 ..........................Hold Open Main Arm 56.00 138.00 146.004010-49FL ........................FL Main Arm & Rod 56.004010-77....................................Arm & Forearm 104.00 246.00 282.004010-79.........................................Rod & Shoe 24.00 80.00 115.004010-79FL................................FL Rod & Shoe 24.004010-79H...................................H Rod & Shoe 24.00 80.00 115.004010-83...........................................Arm Screw 2.40 5.20 8.304010-83H ....................................H Arm Screw 2.40 5.20 8.304010-95 .............................................Arm Stud 11.00 46.00 55.004010-136FL....................................FL Forearm 206.004010-159.........................................Arm Screw 2.404010-Flat Box........................Flat Box w/Label 4.004010-Instruction Sheet..........Instruction Sheet 3.004010-Rebox Kit ..........Box & Instruction Sheet 5.00

4010T Series4011(3,4)T-3071 ...................Std Cylinder Assy $279.004010T-3077T ..............................Standard Arm 84.00 $194.00 $233.004010T-3077DE......................................DE Arm 134.00 244.00 283.004010T-3038 ..............................Standard Track 50.004010T-3038B..........................Track w/Bumper 60.004010T-3038H .....................Track w/Hold Open 70.004010T-3038HB .Track w/Hold Open & Bumper 80.004010T-72 .................................Standard Cover 20.004010T-72MC .................................Metal Cover 25.00 175.00 210.004010T-SRT..................Screw Pack (incl -3034) 34.00 54.00 67.004010T-TBSRT .............Screw Pack (incl -3034) 34.00 54.00 67.004010T-WMS................Screw Pack (incl -3034) 34.00 54.00 67.004010T-TBWMS ...........Screw Pack (incl -3034) 34.00 54.00 67.004010T-TORX ...............Screw Pack (incl -3034) 38.00 67.00 81.004010T-TBTRX .............Screw Pack (incl -3034) 38.00 67.00 81.004010T-18...................................................Plate 52.00 181.00 219.004010T-31 ......................................Cover Screw 2.40 4.80 7.304010T-73.............................................End Cap 7.304010T-78DE ..........................Main Arm & Tube 89.004010T-82 ....................................................Rod 53.004010T-83H...................................H Arm Screw 2.404010T-141-2 ..............................................Plug 2.404010T-159 .......................................Arm Screw 2.404010T-169 ...................................Bumper Assy 18.004010T-425 ...........................Roller Lock Screw 3.504010T-3034....................................Track Roller 15.004010T-3054..............................Hold Open Clip 30.004010T-Flat Box ......................Flat Box w/Label 4.004010T-Instruction Sheet ........Instruction Sheet 3.004010T-Rebox Kit.........Box & Instruction Sheet 5.00

4020 Series4021(6)-3071........................Std Cylinder Assy $279.004021-3071DEL.......................Del Act Cyl Assy 309.004021(6)-3071TEL.................TEL Cylinder Assy 309.004020-3077 ..........................................Reg Arm 109.00 $308.00 $387.004020-3077L.......................................Long Arm 109.00 308.00 387.004020-3049 ...............................Hold Open Arm 155.00 361.00 444.004020-3049FL.........................................FL Arm 222.004020-72 ...................................Standard Cover 20.004020-72MC ...................................Metal Cover 25.00 175.00 210.004020-SRT ......................................Screw Pack 17.00 39.00 54.004020-TBSRT..................................Screw Pack 17.00 39.00 54.004020-WMS ....................................Screw Pack 17.00 39.00 54.004020-TBWMS................................Screw Pack 17.00 39.00 54.004020-TORX....................................Screw Pack 21.00 54.00 67.004020-TBTRX..................................Screw Pack 21.00 54.00 67.00

4020-18 ....................................................Plate $52.00 $181.00 $219.004020-18G..................................................Plate 52.00 181.00 219.004020-28 .........................................Fusible Link 9.604020-31........................................Cover Screw 2.40 4.80 7.304020-37 ..................................Hold Open Stud 23.004020-37FL .........................FL Hold Open Stud 23.004020-41 ....................................Hold Open Nut 6.304020-45 .................................Hold Open Shoe 21.00 52.00 66.004020-48 ............................Hold Open Forearm 60.00 120.00 152.004020-49 ..........................Hold Open Main Arm 56.00 138.00 146.004020-49FL ........................FL Main Arm & Rod 56.004020-77....................................Arm & Forearm 104.00 246.00 282.004020-79.........................................Rod & Shoe 24.00 80.00 115.004020-79FL................................FL Rod & Shoe 24.004020-79H...................................H Rod & Shoe 24.00 80.00 115.004020-79LR ...........................Long Rod & Shoe 24.00 80.00 115.004020-83...........................................Arm Screw 2.40 5.20 8.304020-83H ....................................H Arm Screw 2.40 5.20 8.304020-136FL....................................FL Forearm 206.004020-159.........................................Arm Screw 2.404020-Flat Box........................Flat Box w/Label 4.004020-Instruction Sheet..........Instruction Sheet 3.004020-Rebox Kit ..........Box & Instruction Sheet 5.00

4020T Series4021(3,4)T-3071 ...................Std Cylinder Assy $279.004020T-3077T ..............................Standard Arm 84.00 $194.00 $233.004020T-3038 ..............................Standard Track 50.004020T-3038B..........................Track w/Bumper 60.004020T-3038H .....................Track w/Hold Open 70.004020T-3038HB .Track w/Hold Open & Bumper 80.004020T-72 .................................Standard Cover 20.004020T-72MC .................................Metal Cover 25.00 175.00 210.004020T-SRT..................Screw Pack (incl -3034) 34.00 54.00 67.004020T-TBSRT .............Screw Pack (incl -3034) 34.00 54.00 67.004020T-WMS................Screw Pack (incl -3034) 34.00 54.00 67.004020T-TBWMS ...........Screw Pack (incl -3034) 34.00 54.00 67.004020T-TORX ...............Screw Pack (incl -3034) 38.00 67.00 81.004020T-TBTRX .............Screw Pack (incl -3034) 38.00 67.00 81.004020T-18...................................................Plate 52.00 181.00 219.004020T-31 ......................................Cover Screw 2.40 4.80 7.304020T-73.............................................End Cap 7.304020T-141-2 ..............................................Plug 2.404020T-159 .......................................Arm Screw 2.404020T-169 ...................................Bumper Assy 18.004020T-425 ...........................Roller Lock Screw 3.504020T-3034....................................Track Roller 15.004020T-3054..............................Hold Open Clip 30.004020T-Flat Box ......................Flat Box w/Label 4.004020T-Instruction Sheet ........Instruction Sheet 3.004020T-Rebox Kit.........Box & Instruction Sheet 5.00

4030 Series4031-3071............................Std Cylinder Assy $225.004030-3077 ..........................................Reg Arm 92.00 $202.00 $259.004030-3077/PA .......................Reg Arm w/62PA 97.00 262.00 339.004030-3077/62A .......................Reg Arm w/62A 112.00 277.00 354.004030-3077LD............................Light Duty Arm 72.00 171.00 206.004030-3077LD/PA.............Light Duty Arm w/PA 77.00 231.00 286.004030-3077LD/62A.........Light Duty Arm w/62A 92.00 246.00 301.004030-3077L.......................................Long Arm 92.00 202.00 259.004030-3049 ..............................................H Arm 120.00 277.00 318.004030-3049/PA ...........................H Arm w/62PA 125.00 337.00 398.004030-3049/L..................................H Long Arm 120.00 277.00 318.004030-3077EDA...................................EDA Arm 108.00 297.00 340.004030-3049EDA...............................H EDA Arm 138.00 345.00 403.004030-3077CNS.................................Cush Arm 138.00 345.00 403.004030-3049CNS ..............................HCush Arm 191.00 383.00 464.00


4010 Series continued 4020 Series continued

4030-3077SCNS ............................SCush Arm $269.00 $417.00 $483.004030-3049SCNS ................Spring HCush Arm 319.00 478.00 538.004030-72MC ...................................Metal Cover 20.00 165.00 195.004030-WMS ....................................Screw Pack 17.00 39.00 54.004030-TBWMS................................Screw Pack 17.00 39.00 54.004030-18PA................................................Plate 52.00 181.00 219.004030-18TJ ................................................Plate 52.00 181.00 219.004030-30 ............................Cush Shoe Support 20.00 60.00 73.004030-31........................................Cover Screw 2.40 4.80 7.304030-61.................................................Spacer 22.00 62.00 75.004030-62A ...................................Auxiliary Shoe 38.00 95.00 110.004030-62PA ..........................................PA Shoe 12.00 81.00 96.004030-77....................................Arm & Forearm 104.00 246.00 282.004030-79.........................................Rod & Shoe 24.00 80.00 115.004030-79LR ...........................Long Rod & Shoe 24.00 80.00 115.004030-83...........................................Arm Screw 2.40 5.20 8.304030-83H ....................................H Arm Screw 2.404030-159.........................................Arm Screw 2.404030-201...............................................Spacer 3.504030-419....................................Panel Adapter 53.00 141.00 156.004030-3045 .............................Hold Open Shoe 18.004030-3048...........................Head & Tube Assy 72.004030-3080 ..........................Spring Cush Block 52.004030-Flat Box........................Flat Box w/Label 4.004030-Instruction Sheet..........Instruction Sheet 3.004030-Rebox Kit ..........Box & Instruction Sheet 5.00

4030T Series4031T-3071 ..........................Std Cylinder Assy $225.004030T-3077T ..............................Standard Arm 75.00 $184.00 $228.004030T-3038 ..............................Standard Track 50.004030T-3038H .....................Track w/Hold Open 70.004030T-72MC .................................Metal Cover 20.00 165.00 195.004030T-WMS...................................Screw Pack 17.00 39.00 54.004030T-TBWMS ..............................Screw Pack 17.00 39.00 54.004030T-73.............................................End Cup 7.304030T-141-1 ..............................................Plug 2.404030T-141-2 ..............................................Plug 2.404030T-159 .......................................Arm Screw 2.404030T-425 ...........................Roller Lock Screw 3.504030T-3054..............................Hold Open Clip 30.004030T-Flat Box ......................Flat Box w/Label 4.004030T-Instruction Sheet ........Instruction Sheet 3.004030T-Rebox Kit.........Box & Instruction Sheet 5.00

4040XP Series4040XP-3071 ..........................Std Cylinder Assy $289.004041-3071DEL........................Std Cylinder Assy 319.004040XP-3077 .........................................Reg Arm 113.00 $312.00 $399.004040XP-3077/PA......................Reg Arm w/62PA 118.00 372.00 479.004040XP-3077/62A......................Reg Arm w/62A 133.00 387.00 494.004040XP-3077L .....................................Long Arm 113.00 312.00 399.004040XP-3077XL ...............................XL Reg Arm 143.00 342.00 429.004040XP-3049..............................Hold Open Arm 163.00 379.00 459.004040XP-3049/PA..........................H Arm w/62PA 168.00 439.00 539.004040XP-3049L..................................H Long Arm 163.00 379.00 459.004040XP-3077EDA .................................EDA Arm 146.00 368.00 450.004040XP-3077EDA/G .................EDA Arm w/62G 146.00 368.00 450.004040XP-3049EDA .............................H EDA Arm 172.00 389.00 471.004040XP-3049EDA/G .............H EDA Arm w/62G 172.00 389.00 471.004040XP-3077CNS ...............................Cush Arm 172.00 389.00 471.004040XP-3049CNS............................H Cush Arm 227.00 449.00 538.004040XP-3077SCNS .........................S Cush Arm 308.00 475.00 569.004040XP-3049SCNS .............Spring H Cush Arm 351.00 542.00 619.004040XP-72..................................Standard Cover 20.00



PARTS & ACCESSORIES


PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


US 10 US 26


COATFINISHES

STANDARDPOWDER

COATFINISHES


BLACK (693)


BLACK (693)

partS & aCCESSoriES

4040XP-72MC..................................Metal Cover $25.00 $175.00 $210.004040XP-SRT .....................................Screw Pack 17.00 39.00 54.004040XP-TBSRT.................................Screw Pack 17.00 39.00 54.004040XP-WMS ...................................Screw Pack 17.00 39.00 54.004040XP-TBWMS ..............................Screw Pack 17.00 39.00 54.004040XP-TORX ..................................Screw Pack 21.00 54.00 67.004040XP-TBTRX.................................Screw Pack 21.00 54.00 67.004040XP-18....................................................Plate 52.00 181.00 219.004040XP-18G.................................................Plate 52.00 181.00 219.004040XP-18PA ...............................................Plate 52.00 181.00 219.004040XP-18TJ................................................Plate 52.00 181.00 219.004040XP-30 ...........................Cush Shoe Support 20.00 60.00 73.004040XP-31.......................................Cover Screw 2.40 4.80 7.304040XP-37.................................Hold Open Stud 23.004040XP-37EDA .................EDA Hold Open Stud 23.004040XP-41...................................Hold Open Nut 6.30 33.00 47.004040XP-45 ................................Hold Open Shoe 21.00 52.00 66.004040XP-48...........................Hold Open Forearm 60.00 120.00 152.004040XP-49.........................Hold Open Main Arm 58.00 141.00 152.004040XP-61 ................................................Spacer 22.00 62.00 75.004040XP-62A..................................Auxiliary Shoe 38.00 95.00 110.004040XP-62PA .........................................PA Shoe 12.00 81.00 96.004040XP-77...................................Arm & Forearm 113.00 255.00 294.004040XP-78H................................H Head & Tube 64.00 116.00 152.004040XP-78HL ........................Head & Long Tube 64.00 116.00 152.004040XP-79........................................Rod & Shoe 24.00 80.00 115.004040XP-79LR..........................Long Rod & Shoe 24.00 80.00 115.004040XP-79ELR............................XL Rod & Shoe 48.00 104.00 139.004040XP-83..........................................Arm Screw 2.40 5.20 8.304040XP-83H ...................................H Arm Screw 2.40 5.20 8.304040XP-95 ............................................Arm Stud 11.00 46.00 55.004040XP-124...................................................Plug 2.404040XP-159........................................Arm Screw 2.404040XP-201 ..............................................Spacer 3.504040XP-384..................................................Stop 18.004040XP-419 ..................................Panel Adapter 53.00 141.00 156.004040XP-3048 .........................Head & Tube Assy 76.00 213.00 274.004040XP-3048L..............Head & Long Tube Assy 76.00 213.00 274.004040XP-3080.........................Spring Cush Block 52.004040XP-Flat Box ......................Flat Box w/Label 4.004040XP-Instruction Sheet........Instruction Sheet 3.004040XP-Rebox Kit.........Box & Instruction Sheet 5.00

4040XPT Series4040XPT-3071 .....................Std Cylinder Assy $289.004040XPT-3077T..........................Standard Arm 95.00 $197.00 $240.004040XPT-3077DE .................................DE Arm 145.00 247.00 290.004040XPT-3038..........................Standard Track 50.004040XPT-3038B .....................Track w/Bumper 60.004040XPT-3038H ................Track w/Hold Open 70.004040XPT-3038HBTrack w/Hold Open & Bumper 80.004040XPT-72.............................Standard Cover 20.004040XPT-72MC.............................Metal Cover 25.00 175.00 210.004040XPT-SRT .............Screw Pack (incl -3034) 34.00 54.00 67.004040XPT-TBSRT.........Screw Pack (incl -3034) 34.00 54.00 67.004040XPT-WMS ...........Screw Pack (incl -3034) 34.00 54.00 67.004040XPT-TBWMS.......Screw Pack (incl -3034) 34.00 54.00 67.004040XPT-TORX...........Screw Pack (incl -3034) 38.00 67.00 81.004040XPT-TBTRX.........Screw Pack (incl -3034) 38.00 67.00 81.004040XPT-18 ..............................................Plate 52.00 181.00 219.004040XPT-18TJ ..........................................Plate 52.00 181.00 219.004040XPT-31..................................Cover Screw 2.40 4.80 7.304040XPT-61...........................................Spacer 11.004040XPT-73 ........................................End Cap 7.304040XPT-78DE......................Main Arm & Tube 89.004040XPT-82................................................Rod 53.004040XPT-83H........................H Arm Set Screw 2.404040XPT-141-1..........................................Plug 2.40


4040XPT Series continued on next page



partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER


US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


PLATED FINISHES


BLACK (693)

STANDARDPOWDER

COATFINISHES


BLACK (693)

4110-3049EDA...............................H EDA Arm $155.00 $361.00 $444.004110-3049EDA/G ...............H EDA Arm w/62G 155.00 361.00 444.004110-3077CNS.................................Cush Arm 155.00 361.00 444.004110-3049CNS .............................H Cush Arm 218.00 422.00 510.004110-3077SCNS ...........................S Cush Arm 293.00 451.00 530.004110-3049SCNS ...............Spring H Cush Arm 346.00 536.00 593.004110-3049FL.........................................FL Arm 222.004110-72 ...................................Standard Cover 20.004110-72MC ...................................Metal Cover 25.00 175.00 210.004110-SRT ......................................Screw Pack 17.00 39.00 54.004110-TBSRT..................................Screw Pack 17.00 39.00 54.004110-WMS ....................................Screw Pack 17.00 39.00 54.004110-TBWMS................................Screw Pack 17.00 39.00 54.004110-TORX....................................Screw Pack 21.00 54.00 67.004110-TBTRX..................................Screw Pack 21.00 54.00 67.004110-18 ....................................................Plate 52.00 181.00 219.004110-18CUSH ..........................................Plate 52.00 181.00 219.004110-28 .........................................Fusible Link 9.604110-30 ............................Cush Shoe Support 20.00 60.00 73.004110-31........................................Cover Screw 2.40 4.80 7.304110-37 ..................................Hold Open Stud 23.004110-41 ....................................Hold Open Nut 6.30 33.00 47.004110-48 ............................Hold Open Forearm 60.00 120.00 152.004110-49FL ........................FL Main Arm & Rod 56.004110-61.................................................Spacer 22.00 62.00 75.004110-62FL .....................................PA-FL Shoe 12.004110-77EDA......................................Main Arm 104.00 246.00 282.004110-136FL....................................FL Forearm 206.004110-159.........................................Arm Screw 2.404110-201...............................................Spacer 3.504110-419....................................Panel Adapter 53.00 141.00 156.004110-3080 ..........................Spring Cush Block 52.004110-Flat Box........................Flat Box w/Label 4.004110-Instruction Sheet..........Instruction Sheet 3.004110-Rebox Kit ..........Box & Instruction Sheet 5.00

4110T Series4111(3,4)T-3071 ...................Std Cylinder Assy $279.004110T-3077T ..............................Standard Arm 84.00 $194.00 $233.004110T-3038 ..............................Standard Track 50.004110T-3038B..........................Track w/Bumper 60.004110T-3038H .....................Track w/Hold Open 70.004110T-3038HB .Track w/Hold Open & Bumper 80.004110T-72 .................................Standard Cover 20.004110T-72MC .................................Metal Cover 25.00 175.00 210.004110T-SRT..................Screw Pack (incl -3034) 34.00 54.00 67.004110T-TBSRT .............Screw Pack (incl -3034) 34.00 54.00 67.004110T-WMS................Screw Pack (incl -3034) 34.00 54.00 67.004110T-TBWMS ...........Screw Pack (incl -3034) 34.00 54.00 67.004110T-TORX ...............Screw Pack (incl -3034) 38.00 67.00 81.004110T-TBTRX .............Screw Pack (incl -3034) 38.00 67.00 81.004110T-18...................................................Plate 52.00 181.00 219.004110T-31 ......................................Cover Screw 2.40 4.80 7.304110T-73.............................................End Cap 7.304110T-141-1 ..............................................Plug 2.404110T-159 .......................................Arm Screw 2.404110T-169 ...................................Bumper Assy 18.004110T-425 ...........................Roller Lock Screw 3.504110T-3034....................................Track Roller 15.004110T-3054..............................Hold Open Clip 30.004110T-Flat Box ......................Flat Box w/Label 4.004110T-Instruction Sheet ........Instruction Sheet 3.004110T-Rebox Kit.........Box & Instruction Sheet 5.00

4210 Series4211(6)-3071........................Std Cylinder Assy $291.004211(6)-3071AVB................AVB Cylinder Assy 306.004211-3071DEL..........Del Action Cylinder Assy 321.00

4040XPT-141-2..........................................Plug $2.404040XPT-159...................................Arm Screw 2.404040XPT-163....................................Arm Insert 2.404040XPT-164 ................................Screw Insert 2.404040XPT-169...............................Bumper Assy 18.004040XPT-425.......................Roller Lock Screw 3.504040XPT-3034 ...............................Track Roller 15.004040XPT-3054 .........................Hold Open Clip 30.004040XPT-Flat Box..................Flat Box w/Label 4.004040XPT-Instruction Sheet ...Instruction Sheet 3.004040XPT-Rebox Kit ....Box & Instruction Sheet 5.00

4040SE Series4040SE-3071 .......................Std Cylinder Assy $289.004040SE-3077T ...........................Standard Arm 110.00 $222.00 $272.004040SE-3077DE...................................DE Arm 160.00 272.00 322.004040SE-3038 ...........................Standard Track 300.004040SEL-3038SEL .........................Long Track 300.004040SE-72 ..............................Standard Cover 20.004040SE-72MC...............................Metal Cover 25.00 175.00 210.004040SE-WMS.................Screw Pack (inc. -81) 39.00 60.00 76.004040SE-TBWMS ............Screw Pack (inc. -81) 39.00 60.00 76.004040SE-TORX ................Screw Pack (inc. -81) 45.00 73.00 90.004040SE-TBTRX ..............Screw Pack (inc. -81) 45.00 73.00 90.004040SE-18................................................Plate 52.00 181.00 219.004040SE-18PA ...........................................Plate 52.00 181.00 219.004040SE-31 ...................................Cover Screw 2.40 4.80 7.304040SE-59A...................................Cover Plate 4.804040SE-60..........................Cover Plate Screw 2.404040SE-61 ............................................Spacer 11.004040SE-73..........................................End Cap 7.304040SE-78 .....................................Arm & Tube 64.00 160.00 219.004040SE-78DE .......................Main Arm & Tube 89.004040SE-81...........................Connector w/Ring 4.604040SE-82 .................................................Rod 53.00 122.00 151.004040SE-83H................................H Arm Screw 2.404040SE-141...............................................Plug 2.404040SE-141-1 ...........................................Plug 2.404040SE-141-2 ...........................................Plug 2.404040SE-159 ....................................Arm Screw 2.404040SE-164..................................Screw Insert 2.404040SE-168.............................................Slider 6.204040SE-425 ........................Roller Lock Screw 3.504040SE-3034.................................Track Roller 15.004040SE-3210 ...........................SE Transformer 63.004040SE-3436 ....................On/Off Switch Assy 64.004040SE-Flat Box ...................Flat Box w/Label 4.004040SE-Instruction Sheet .....Instruction Sheet 3.004040SE-Rebox Kit......Box & Instruction Sheet 5.00

4040SEH Series4040SEH-59A....................................Cover Plate $4.804040SEH-78SEH ..............................Arm & Tube 65.00 $180.00 $214.004040SEH-82SEH...........................................Rod 53.00 122.00 151.004040SEH-83SEH................................Arm Screw 2.404040SEH-3077SEH ..............................SEH Arm 147.00 303.00 338.004040SEH-3034..................................Track Roller 15.004040SEH-3038 ...................Standard SEH Track 300.00

4110 Series4111(6)-3071........................Std Cylinder Assy $279.004111(6)-3071AVB................AVB Cylinder Assy 294.004111-3071DEL.......................Del Act Cyl Assy 309.004111(6)-3071TEL.................TEL Cylinder Assy 309.004110-3077EDA...................................EDA Arm 109.00 $308.00 $387.004110-3077EDA/G...................EDA Arm w/62G 109.00 308.00 387.00

4040XPT Series continued


4210-3077EDA...................................EDA Arm $109.004210-3077CNS.................................Cush Arm 155.004210-3049CNS .............................H Cush Arm 218.004210-72MC ...................................Metal Cover 35.00 $175.00 $210.004210-TORX....................................Screw Pack 21.00 54.00 67.004210-TBTRX..................................Screw Pack 21.00 54.00 67.004210-18 ....................................................Plate 73.00 253.00 297.004210-18CUSH ..........................................Plate 73.00 253.00 297.004210-30 ............................Cush Shoe Support 20.00 60.00 73.004210-31........................................Cover Screw 2.40 4.80 7.304210-61.................................................Spacer 22.00 62.00 75.004210-159.........................................Arm Screw 2.404210-201...............................................Spacer 3.504210-419....................................Panel Adapter 53.00 141.00 156.004210-Flat Box........................Flat Box w/Label 4.004210-Instruction Sheet..........Instruction Sheet 3.004210-Rebox Kit ..........Box & Instruction Sheet 5.00

4210T Series4211(3,4)T-3071 ...................Std Cylinder Assy $291.004211(3,4)T-3071AVB ...........AVB Cylinder Assy 306.004210T-3077T ..............................Standard Arm 105.00 $236.00 $274.004210T-3038 ..............................Standard Track 80.004210T-72MC .................................Metal Cover 35.00 175.00 210.004210T-TORX ..............Screw Pack (incl. -3034) 21.00 54.00 67.004210T-TBTRX ............Screw Pack (incl. -3034) 21.00 54.00 67.004210T-18...................................................Plate 73.00 253.00 297.004210T-31 ......................................Cover Screw 2.40 4.80 7.304210T-159 .......................................Arm Screw 2.404210T-3034....................................Track Roller 20.004210T-Flat Box ......................Flat Box w/Label 4.004210T-Instruction Sheet ........Instruction Sheet 3.004210T-Rebox Kit.........Box & Instruction Sheet 5.00

4310ME Series4314ME-3071 ......................Std Cylinder Assy $787.004314ME-3071B80...............B80 Cylinder Assy 882.004314ME-3071B140 ...........B140 Cylinder Assy 882.004314ME-3971 .............................Cylinder Only 735.004314ME-3971B80 ...............B80 Cylinder Only 830.004314ME-3971B140 ...........B140 Cylinder Only 830.004310ME-3077SF.....................Swing Free Arm 90.00 $249.00 $282.004310ME-3077DE..................................DE Arm 140.00 299.00 332.004310ME-3038...........................Standard Track 50.004310ME-72MC..............................Metal Cover 115.00 310.00 380.004310ME-WMS ............Screw Pack (incl -3034) 34.00 54.00 67.004310ME-TBWMS........Screw Pack (incl -3034) 34.00 54.00 67.004310ME-TORX ...........Screw Pack (incl -3034) 38.00 67.00 81.004310ME-TBTRX..........Screw Pack (incl -3034) 38.00 67.00 81.004310ME-18...............................................Plate 155.00 268.00 347.004310ME-31 ..................................Cover Screw 2.40 4.80 7.304310ME-61............................................Spacer 11.004310ME-73 .........................................End Cap 7.304310ME-83 .....................................Arm Screw 2.40 5.20 8.304310ME-141-2 ..........................................Plug 2.404310ME-159 ...................................Arm Screw 2.404310ME-425........................Roller Lock Screw 3.504310ME-3034 ................................Track Roller 15.004310ME-3351.........................ME Switch Assy 152.004310ME-3354 .......................ME Wire Harness 14.004310ME-3431..............................Input Jumper 5.204310ME-Flat Box ..................Flat Box w/Label 4.004310ME-Instruction Sheet ....Instruction Sheet 3.004310ME-Rebox Kit .....Box & Instruction Sheet 5.00



PARTS & ACCESSORIES


PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


US 10 US 26


COATFINISHES

STANDARDPOWDER

COATFINISHES


BLACK (693)


BLACK (693)

partS & aCCESSoriES

4410ME Series4414ME-3071 ......................Std Cylinder Assy $787.004414ME-3071/18G..........Std Cyl. Assy w/18G 787.004414ME-3071B80...............B80 Cylinder Assy 882.004414ME-3071B80G........B80 Cyl. Assy w/18G 882.004414ME-3071B140 ...........B140 Cylinder Assy 882.004414ME-3071B140G....B140 Cyl. Assy w/18G 882.004414ME-3971 .............................Cylinder Only 735.004414ME-3971B80 ...............B80 Cylinder Only 830.004414ME-3971B140 ...........B140 Cylinder Only 830.004410ME-3077.....................................Reg Arm 100.00 $317.00 $376.004410ME-3077L .................................Long Arm 100.00 317.00 376.004410ME-72MC..............................Metal Cover 115.00 310.00 380.004410ME-WMS ...............................Screw Pack 17.00 39.00 54.004410ME-TBWMS...........................Screw Pack 17.00 39.00 54.004410ME-TORX ..............................Screw Pack 21.00 54.00 67.004410ME-TBTRX.............................Screw Pack 21.00 54.00 67.004410ME-18...............................................Plate 155.00 268.00 347.004410ME-18G............................Mounting Plate 155.00 268.00 347.004410ME-31 ..................................Cover Screw 2.40 4.80 7.304410ME-77...............................Arm & Forearm 104.00 246.00 282.004410ME-77L ...................Long Arm & Forearm 104.00 246.00 282.004410ME-79....................................Rod & Shoe 24.00 80.00 115.004410ME-79L...............................ME Long Rod 24.00 80.00 115.004410ME-83H ...............................H Arm Screw 2.404410ME-159 ...................................Arm Screw 2.404410ME-3351.........................ME Switch Assy 152.004410ME-3354 .......................ME Wire Harness 14.004410ME-3431..............................Input Jumper 5.204410ME-Flat Box ..................Flat Box w/Label 4.004410ME-Instruction Sheet ....Instruction Sheet 3.004410ME-Rebox Kit .....Box & Instruction Sheet 5.00

4510 Series4511(6)-3071........................Std Cylinder Assy $291.004511(6)-3071AVB................AVB Cylinder Assy 306.004511-3071DEL..........Del Action Cylinder Assy 321.004510-3077EDA...................................EDA Arm 109.004510-72MC ...................................Metal Cover 35.00 $175.00 $210.004510-TORX....................................Screw Pack 21.00 54.00 67.004510-TBTRX..................................Screw Pack 21.00 54.00 67.004510-18 ....................................................Plate 73.00 253.00 297.004510-31........................................Cover Screw 2.40 4.80 7.304510-159.........................................Arm Screw 2.404510-Flat Box........................Flat Box w/Label 4.004510-Instruction Sheet..........Instruction Sheet 3.004510-Rebox Kit ..........Box & Instruction Sheet 5.00

4510T Series4511(3,4)T-3071 ...................Std Cylinder Assy $291.004511(3,4)T-3071AVB ...........AVB Cylinder Assy 306.004510T-3077T ..............................Standard Arm 105.00 $236.00 $274.004510T-3038 ..............................Standard Track 80.004510T-72MC .................................Metal Cover 35.00 175.00 210.004510T-TORX ..................................Screw Pack 21.00 54.00 67.004510T-TBTRX ................................Screw Pack 21.00 54.00 67.004510T-18...................................................Plate 73.00 253.00 297.004510T-31 ......................................Cover Screw 2.40 4.80 7.304510T-159 .......................................Arm Screw 2.404510T-3034....................................Track Roller 20.004510T-Flat Box ......................Flat Box w/Label 4.004510T-Instruction Sheet ........Instruction Sheet 3.004510T-Rebox Kit.........Box & Instruction Sheet 5.00

4630 Series4631-3071............................Std Cylinder Assy $4,324.004631-3071CS......Cyl Assy w/Conc I/O Switch 4,324.004631-3971...................................Cylinder Only 1,720.004630-3077T................................Standard Arm 110.00 $222.00 $272.00





4630 Series continued 4640 Series continued

partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER


US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


PLATED FINISHES


BLACK (693)

STANDARDPOWDER

COATFINISHES


BLACK (693)

4640-3462................................Controller Assy $2,061.004640-3498-1.............Ribbon Cable Connector 22.004640-3498-2 .........................A/C Power Cable 45.004640-Flat Box........................Flat Box w/Label 4.004640-Instruction Sheet..........Instruction Sheet 3.004640-Rebox Kit ..........Box & Instruction Sheet 5.00

4810 Series4811-3071............................Std Cylinder Assy $1,320.004811-3971...................................Cylinder Only 1,260.004810-3077T................................Standard Arm 110.00 $222.00 $272.004810-3038................................Standard Track 50.004810-72MC ...................................Metal Cover 95.00 280.00 325.004810-WMS .................Screw Pack (incl -3034) 34.00 54.00 67.004810-TBWMS.............Screw Pack (incl -3034) 34.00 54.00 67.004810-18 ....................................................Plate 200.00 323.00 407.004810-31........................................Cover Screw 2.404810-31L ............................Long Cover Screw 2.404810-61.................................................Spacer 11.004810-73 ..............................................End Cap 7.304810-78..........................................Arm & Tube 64.00 160.00 219.004810-82......................................................Rod 53.004810-83H ....................................H Arm Screw 2.404810-141-2................................................Plug 2.404810-155-1 ................................Caution Decal 5.204810-155-2.............................Activation Decal 5.204810-159.........................................Arm Screw 2.404810-163.......................................Cover Insert 5.204810-182 ...........................................Stand Off 11.004810-334..................................Cover End Cap 10.504810-425 .............................Roller Lock Screw 3.504810-3034 .....................................Track Roller 15.004810-Flat Box........................Flat Box w/Label 4.004810-Instruction Sheet..........Instruction Sheet 3.004810-Rebox Kit ..........Box & Instruction Sheet 5.00

4820 Series4822-3071............................Std Cylinder Assy $1,320.004822-3071/18G........Std Cylinder Assy w/18G 1,320.004822-3971...................................Cylinder Only 1,260.004820-3077 ..........................................Reg Arm 113.00 $312.00 $399.004820-3077L.......................................Long Arm 143.00 342.00 429.004820-72MC ...................................Metal Cover 90.00 275.00 315.004820-WMS ....................................Screw Pack 17.00 39.00 54.004820-TBWMS................................Screw Pack 17.00 39.00 54.004820-18 ....................................................Plate 200.00 323.00 407.004820-18G..................................................Plate 200.00 323.00 407.004820-31........................................Cover Screw 2.404820-31L ............................Long Cover Screw 2.404820-77....................................Arm & Forearm 113.00 255.00 294.004820-79.........................................Rod & Shoe 24.00 80.00 115.004820-79LR ...........................Long Rod & Shoe 48.00 104.00 139.004820-83...........................................Arm Screw 2.404820-155-1 ................................Caution Decal 5.204820-155-2.............................Activation Decal 5.204820-159.........................................Arm Screw 2.404820-163.......................................Cover Insert 5.204820-182 ...........................................Stand Off 11.004820-334..................................Cover End Cap 10.504820-Flat Box........................Flat Box w/Label 4.004820-Instruction Sheet..........Instruction Sheet 3.004820-Rebox Kit ..........Box & Instruction Sheet 5.00

4630-3038................................Standard Track $50.004630-72MC ...................................Metal Cover 150.00 $475.00 $510.004630-WMS .................Screw Pack (incl -3034) 56.00 82.00 95.004630-TBWMS.............Screw Pack (incl -3034) 56.00 82.00 95.004630-TORX.................Screw Pack (incl -3034) 63.00 95.00 108.004630-TBTRX...............Screw Pack (incl -3034) 63.00 95.00 108.004630-31........................................Cover Screw 2.404630-61.................................................Spacer 11.004630-73 ..............................................End Cap 7.304630-78..........................................Arm & Tube 64.00 160.00 219.004630-82......................................................Rod 53.00 122.00 151.004630-83H ....................................H Arm Screw 2.404630-141-2................................................Plug 2.404630-155-1 ................................Caution Decal 5.204630-155-2.............................Activation Decal 5.204630-159.........................................Arm Screw 2.404630-334 ............................................End Cap 40.004630-334-2 ...............................End Cap, Plain 40.004630-334CS........End Cap, Concealed Switch 40.004630-425 .............................Roller Lock Screw 3.504630-441A ............................Plug 12 pin, 1-12 60.004630-441B ..........................Plug 12 pin, 13-24 60.004630-441C...............................Connector Plug 9.704630-480 .................................Shaft Extension 47.004630-3018 .......................Mounting Plate Assy 2,992.004630-3034 .....................................Track Roller 15.004630-3179-1 .....................On/Off Switch Assy 45.004630-3179-2...............Hold Open Switch Assy 45.004630-3180................................I/O Board Assy 327.004630-3454 ..........................Motor/Clutch Assy 1,836.004630-3462................................Controller Assy 2,061.004630-3498-1.............Ribbon Cable Connector 22.004630-3498-2 .........................A/C Power Cable 45.004630-Flat Box........................Flat Box w/Label 4.004630-Instruction Sheet..........Instruction Sheet 3.004630-Rebox Kit ..........Box & Instruction Sheet 5.00

4640 Series4642-3071............................Std Cylinder Assy $4,324.004642-3071CS......Cyl Assy w/Conc I/O Switch 4,324.004642-3971...................................Cylinder Only 1,720.004640-3077 ..........................................Reg Arm 113.00 $312.00 $399.004640-3077L.......................................Long Arm 143.00 342.00 429.004640-72MC ...................................Metal Cover 150.00 475.00 510.004640-WMS ....................................Screw Pack 56.00 82.00 95.004640-TBWMS................................Screw Pack 56.00 82.00 95.004640-TORX....................................Screw Pack 63.00 95.00 108.004640-TBTRX..................................Screw Pack 63.00 95.00 108.004640-31........................................Cover Screw 2.404640-77....................................Arm & Forearm 113.00 255.00 294.004640-79.........................................Rod & Shoe 24.00 80.00 115.004640-79LR ...........................Long Rod & Shoe 47.00 104.00 139.004640-83...........................................Arm Screw 2.404640-155-1 ................................Caution Decal 5.204640-155-2.............................Activation Decal 5.204640-159.........................................Arm Screw 2.404640-334 ............................................End Cap 40.004640-334-2 ...............................End Cap, Plain 40.004640-334CS........End Cap, Concealed Switch 40.004640-441A .............................Plug 12pin, 1-12 60.004640-441B ............................Plug 12pin,13-24 60.004640-441C...............................Connector Plug 9.704640-480 .................................Shaft Extension 47.004640-3018 .......................Mounting Plate Assy 2,992.004640-3179-1 .....................On/Off Switch Assy 45.004640-3179-2...............Hold Open Switch Assy 45.004640-3180................................I/O Board Assy 327.004640-3454 ..........................Motor/Clutch Assy 1,836.00



PARTS & ACCESSORIES


PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES



COATFINISHES

STANDARDPOWDER

COATFINISHES


BLACK (693)


BLACK (693)

partS & aCCESSoriES

4840 Series4841-3071............................Std Cylinder Assy $1,320.004841-3971...................................Cylinder Only 1,260.004840-3077EDA...................................EDA Arm 146.00 $368.00 $450.004840-3077CNS.................................Cush Arm 172.00 389.00 471.004840-3077SCNS...................Spring Cush Arm 308.00 475.00 569.004840-72MC ...................................Metal Cover 90.00 275.00 315.004840-WMS ....................................Screw Pack 17.00 39.00 54.004840-TBWMS................................Screw Pack 17.00 39.00 54.004840-30 ............................Cush Shoe Support 20.00 60.00 73.004840-31........................................Cover Screw 2.404840-31L ............................Long Cover Screw 2.404840-61.................................................Spacer 22.00 62.00 75.004840-124 ...................................................Plug 2.404840-155-1 ................................Caution Decal 5.204840-155-2.............................Activation Decal 5.204840-159.........................................Arm Screw 2.404840-163.......................................Cover Insert 5.204840-182 ...........................................Stand Off 11.004840-201...............................................Spacer 3.504840-334..................................Cover End Cap 10.504840-419....................................Panel Adapter 53.00 141.00 156.004840-459....................................Door Loop Kit 119.004840-460...............................Pneumatic Hinge 451.004840-3080 ..........................Spring Cush Block 52.004840-Flat Box........................Flat Box w/Label 4.004840-Instruction Sheet..........Instruction Sheet 3.004840-Rebox Kit ..........Box & Instruction Sheet 5.00

5010 Series5011(2,3,4,5,6)-3071............Std Cylinder Assy $325.005011(2,3,4,5)-3071DEL..........Del Act Cyl Assy 355.005010-3077 ..........................................Reg Arm 109.00 $308.00 $387.005010-3049 ...............................Hold Open Arm 155.00 361.00 444.005010-WMS ....................................Screw Pack 17.00 39.00 54.005010-TORX....................................Screw Pack 21.00 54.00 67.005010-11..........................................Finish Plate 41.00 166.00 217.005010-11DA...............................DA Finish Plate 41.00 166.00 217.005010-31........................................Cover Screw 2.405010-37 ..................................Hold Open Stud 23.005010-41 ....................................Hold Open Nut 6.305010-45 .................................Hold Open Shoe 21.00 52.00 66.005010-48 ............................Hold Open Forearm 60.005010-49 ..........................Hold Open Main Arm 56.00 138.00 146.005010-77....................................Arm & Forearm 104.00 246.00 282.005010-79.........................................Rod & Shoe 24.00 80.00 115.005010-79H...................................H Rod & Shoe 24.00 80.00 115.005010-83...........................................Arm Screw 2.405010-83H ....................................H Arm Screw 2.405010-95 .............................................Arm Stud 11.005010-159.........................................Arm Screw 2.405010-3002 .....................Mounting/Finish Plate 62.005010-Flat Box........................Flat Box w/Label 4.005010-Instruction Sheet..........Instruction Sheet 3.005010-Rebox Kit ..........Box & Instruction Sheet 5.00

5030 Series5031(3,4,5,6)-3071...............Std Cylinder Assy $720.00 $945.00 $1,005.005031(3,4,5,6)-3971......................Cylinder Only 616.005030-3077 ..........................................Reg Arm 109.00 308.00 387.005030-3049 ...............................Hold Open Arm 155.00 361.00 444.005030-WMS ....................................Screw Pack 17.00 39.00 54.005030-TORX....................................Screw Pack 21.00 54.00 67.005030-37 ..................................Hold Open Stud 23.005030-41 ....................................Hold Open Nut 6.305030-48 ............................Hold Open Forearm 60.005030-49 ..........................Hold Open Main Arm 56.00 138.00 146.005030-77....................................Arm & Forearm 104.00 246.00 282.005030-79.........................................Rod & Shoe 24.00 80.00 115.005030-79H...................................H Rod & Shoe 24.00 80.00 115.00

5030-83...........................................Arm Screw $2.405030-83H ....................................H Arm Screw 2.405030-159.........................................Arm Screw 2.405030-416 ...................................Wood Clip Set 139.00 $201.00 $252.005030-417 ...................................Wood Clip Set 139.00 201.00 252.005030-3002 .....................Mounting/Finish Plate 131.00 258.00 317.005030-Flat Box........................Flat Box w/Label 4.005030-Instruction Sheet..........Instruction Sheet 3.005030-Rebox Kit ..........Box & Instruction Sheet 5.00

6030 Series6031(2,3,4,5)-3071...............Std Cylinder Assy $832.00 $1,030.00 $1,153.006031(2,3,4,5)-3971......................Cylinder Only 672.006030-3077T................................Standard Arm 153.00 286.00 370.006030-3038B ...........................Track w/Bumper 60.006030-3038HB...Track w/Hold Open & Bumper 80.006030-WMS .................Screw Pack (incl -3034) 34.00 54.00 67.006030-TORX.................Screw Pack (incl -3034) 38.00 67.00 81.006030-83...........................................Arm Screw 2.406030-157.............................................Snubber 14.506030-159.........................................Arm Screw 2.406030-169.....................................Bumper Assy 18.006030-416 ...................................Wood Clip Set 139.00 201.00 252.006030-425 .............................Roller Lock Screw 3.506030-3002 .....................Mounting/Finish Plate 172.00 289.00 350.006030-3034 .....................................Track Roller 20.006030-3054 ...............................Hold Open Clip 30.006030-Flat Box........................Flat Box w/Label 4.006030-Instruction Sheet..........Instruction Sheet 3.006030-Rebox Kit ..........Box & Instruction Sheet 5.00

9130 Series - (ANCLR or ANDKB only)9130-3077T................................Standard Arm $175.009130-3077PLCM ..........Standard Arm w/Track 225.009130-3038................................................Track 60.009130-72MC*..................................Metal Cover 350.009130-72FC* ............................Full Metal Cover 430.009130-MS........................................Screw Pack 20.009130-73.....................................Track End Cap 8.809130-163.......................................Cover Insert 9.809130-163-1 ....................Cover End Cap Insert 9.809130-334 .................................Cover End Cap 38.009130-360 .........................................24v SO Kit 21.009130-3018............................Mounting Bracket 129.009130-3155 ..........................................Label Kit 20.009130-3034 .....................................Track Roller 15.009130-3351-1......................Switch Bracket 29" 60.009130-3351-2......................Switch Bracket 41" 60.009130-3351-3......................Switch Bracket 51" 60.009130-3454 ...............Motor Gearbox Assembly 2,189.009130-3454S ...Motor Gearbox Assembly w/Switch 2,189.009130-3462SC ................Standard Control Box 1,253.009130-3498-2A..............A/C Power Cable - 29" 37.009130-3498-2B .............A/C Power Cable - 42" 37.009130-3498-2C .............A/C Power Cable - 52" 37.00

9140 Series - (ANCLR or ANDKB only)9140-3077 ....................................Regular Arm $150.009140-3077L.......................................Long Arm 150.009140-72MC*..................................Metal Cover 350.009140-72FC* ............................Full Metal Cover 430.009140-MS........................................Screw Pack 20.009140-77.............................................Main Arm 160.009140-79......................................................Rod 41.009140-79LR ........................................Long Rod 41.009140-163.......................................Cover Insert 9.809140-163-1 ....................Cover End Cap Insert 9.809140-334 .................................Cover End Cap 38.009140-360 .........................................24v SO Kit 21.00





partS & aCCESSoriES

PARTS & ACCESSORIES

STANDARDPOWDER


US 4 US 15US 10 US 26

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES

PLATED FINISHES

AL (689)DKBRZ (695)

STANDARDPOWDER

COATFINISHES

9140-3018............................Mounting Bracket $129.009140-3155 ..........................................Label Kit 20.009140-3351-1......................Switch Bracket 29" 60.009140-3351-2......................Switch Bracket 41" 60.009140-3351-3......................Switch Bracket 51" 60.009140-3454 ...............Motor Gearbox Assembly 2,189.009140-3454S.............Motor Gearbox Assembly 2,189.00

........................................................w/Switch9140-3462SC ................Standard Control Box 1,253.009140-3498-2A..............A/C Power Cable - 29" 37.009140-3498-2B .............A/C Power Cable - 42" 37.009140-3498-2C .............A/C Power Cable - 52" 37.00

9150 Series - (ANCLR or ANDKB only)9150-3077 ....................................Regular Arm $150.009150-3077L.......................................Long Arm 150.009150-72MC*..................................Metal Cover 450.009150-MS........................................Screw Pack 20.009150-77.............................................Main Arm 160.009150-79......................................................Rod 41.009150-79LR ........................................Long Rod 41.009150-163.......................................Cover Insert 9.809150-163-1 ....................Cover End Cap Insert 9.809150-334 .................................Cover End Cap 38.009150-360 .........................................24v SO Kit 21.009150-3018............................Mounting Bracket 129.009150-3155 ..........................................Label Kit 20.009150-3351-1......................Switch Bracket 29" 60.009150-3351-2......................Switch Bracket 41" 60.009150-3351-3......................Switch Bracket 51" 60.009150-3454 ...............Motor Gearbox Assembly 2,189.009150-3454S.............Motor Gearbox Assembly 2,189.00

........................................................w/Switch9150-3462SC ................Standard Control Box 1,253.009150-3498-2A.......................A/C Power Cable 37.00

9530 Series - (ANCLR or ANDKB only)9530-3077T................................Standard Arm $275.009530-3077PLCM ..........Standard Arm w/Track 325.009530-3038................................................Track 60.009530-3572HL*................................Header Asy 726.009530-3572HL/S* .......Header Asy w/Stop Prep 726.009530-3572DD*..........Double Door Header Asy 943.009530-3572DD/S* ......Double Door Header Asy 943.00

...................................................w/Stop Prep9530-MS........................................Screw Pack 20.009530-11A .......................Spindle Plate - 2 3/4" 69.009530-11B .......................Spindle Plate - 3 3/4" 69.009530-12* ................................Blank Filler Plate 83.009530-18*...................................Mounting Plate 67.00 / ft

.............Add 3 1/2" if Using Angled Brackets9530-73.....................................Track End Cap 29.009530-275 ................Mounting Bracket - 2 3/4" 92.009530-334 .................................Header Endcap 40.009530-334-1 ..............................Angled Bracket 144.009530-334-2 .............................End Dress Plate 69.009530-375 ................Mounting Bracket - 3 3/4" 92.009530-511* ..............Dress Plate Extrusion Only 15.00 / ft9530-518................................Cable/Parts Bag 83.009530-572*.....................Header Extrusion Only 45.00 / ft9530-572HL* ................................Header Only 382.009530-572HL/S*........Header Only w/Stop Prep 382.009530-572DD* ..........Double Door Header Only 527.009530-572DD/S*.......Double Door Header Only 527.00

...................................................w/Stop Prep9530-3018........................Rear Mount Bracket 92.009530-3034 .....................................Track Roller $30.009530-3155 ..........................................Label Kit 24.009530-3454 .............Motor Gearbox (Std Force) 2,233.009530-3462 ........................................Controller 1,439.00

9540 Series - (ANCLR or ANDKB only)9540-3077 ....................................Regular Arm $255.009540-3077L.......................................Long Arm 255.009540-3572HL*................................Header Asy 726.009540-3572HL/S* .......Header Asy w/Stop Prep 726.009540-3572DD*..........Double Door Header Asy 943.009540-3572DD/S* ......Double Door Header Asy 943.00

...................................................w/Stop Prep9540-MS........................................Screw Pack 20.009540-11A .......................Spindle Plate - 2 3/4" 69.009540-11B .......................Spindle Plate - 3 3/4" 69.009540-12* ................................Blank Filler Plate 83.009540-18 ....................................Mounting Plate 67.00 / ft

.............Add 3 1/2" if Using Angled Brackets9540-77.............................................Main Arm 250.009540-79......................................................Rod 96.009540-79LR ........................................Long Rod 96.009540-82......................................................Rod 53.009540-82L ..........................................Long Rod 53.009540-275 ................Mounting Bracket - 2 3/4" 92.009540-334 .................................Header Endcap 40.009540-334-1 ..............................Angled Bracket 144.009540-334-2 .............................End Dress Plate 69.009540-375 ................Mounting Bracket - 3 3/4" 92.009540-511* ..............Dress Plate Extrusion Only 15.00 / ft9540-518................................Cable/Parts Bag 83.009540-572*.....................Header Extrusion Only 45.00 / ft9540-572HL* ................................Header Only 382.009540-572HL/S*........Header Only w/Stop Prep 382.009540-572DD* ..........Double Door Header Only 527.009540-572DD/S*.......Double Door Header Only 527.00

...................................................w/Stop Prep9540-3018........................Rear Mount Bracket 92.009540-3155 ..........................................Label Kit 24.009540-3454 .............Motor Gearbox (Std Force) 2,233.009540-3462 ........................................Controller 1,439.00

9550 Series - (ANCLR or ANDKB only)99550-3077 ..................................Regular Arm $255.009550-3077L.......................................Long Arm 255.009550-3077T................................Standard Arm 275.009550-3077PLCM ..........Standard Arm w/Track 325.009550-3038................................................Track 60.009550-3572HL*................................Header Asy 943.009550-3572HL/S* .......Header Asy w/Stop Prep 943.009550-MS........................................Screw Pack 20.009550-11A .......................Spindle Plate - 2 3/4" 69.009550-11B .......................Spindle Plate - 3 3/4" 69.009550-12* ................................Blank Filler Plate 83.009550-18 ....................................Mounting Plate 67.00 / ft

.............Add 3 1/2" if Using Angled Brackets9550-77.............................................Main Arm 250.009550-79......................................................Rod 96.009550-82......................................................Rod 53.009550-82L ..........................................Long Rod 53.009550-79LR ........................................Long Rod 96.009550-275 ................Mounting Bracket - 2 3/4" 92.009550-334 .................................Header Endcap 40.009550-334-1 ..............................Angled Bracket 144.009550-334-2 .............................End Dress Plate 69.009550-375 ................Mounting Bracket - 3 3/4" 92.009550-511* ..............Dress Plate Extrusion Only 15.00 / ft9550-518................................Cable/Parts Bag 83.009550-572*.....................Header Extrusion Only 45.00 / ft9550-572HL* ................................Header Only 527.009550-572HL/S*........Header Only w/Stop Prep 527.009550-982 .............................Companion Cable 62.009550-3018........................Rear Mount Bracket 92.00

*Require length - please note when ordering



9550-3034 .....................................Track Roller $30.009550-3155 ..........................................Label Kit 24.009550-3454 .............Motor Gearbox (Std Force) 2,233.009550-3462 ........................................Controller 1,439.00

9560 Series - (ANCLR or ANDKB only)9560-3077 ....................................Regular Arm $255.009560-3077L.......................................Long Arm 255.009560-3077T................................Standard Arm 275.009560-3077PLCM ..........Standard Arm w/Track 325.009560-3038................................................Track 60.009560-3572HL*................................Header Asy 943.009560-3572HL/S* .......Header Asy w/Stop Prep 943.009560-MS........................................Screw Pack 20.009560-11A .......................Spindle Plate - 2 3/4" 69.009560-11B .......................Spindle Plate - 3 3/4" 69.009560-12* ................................Blank Filler Plate 83.009560-18 ....................................Mounting Plate 67.00 / ft

.............Add 3 1/2" if Using Angled Brackets9560-77.............................................Main Arm 250.009560-79......................................................Rod 96.009560-79LR ........................................Long Rod 96.009560-82......................................................Rod 53.009560-82L ..........................................Long Rod 53.009560-275 ................Mounting Bracket - 2 3/4" 92.009560-334 .................................Header Endcap 40.009560-334-1 ..............................Angled Bracket 144.009560-334-2 .............................End Dress Plate 69.009560-375 ................Mounting Bracket - 3 3/4" 92.009560-511* ..............Dress Plate Extrusion Only 15.00 / ft9560-518................................Cable/Parts Bag 83.009560-572*.....................Header Extrusion Only 45.00 / ft9560-572HL* ................................Header Only 527.009560-572HL/S*........Header Only w/Stop Prep 527.009560-3018........................Rear Mount Bracket 92.009560-3034 .....................................Track Roller 30.009560-3155 ..........................................Label Kit 24.009560-3454 .............Motor Gearbox (Std Force) 2,233.009560-3462 ........................................Controller 1,439.00



PARTS & ACCESSORIES

PRICE LIST

PLATED FINISHES

PARTS & ACCESSORIES


COATFINISHES

STANDARDPOWDER

COATFINISHES

partS & aCCESSoriES


*Require length - please note when ordering


334-1

334-2

334

275375

3572HL3572DD3572HL/S3572DD/S

Each of these will include:-334 (2)-275 or -375-3018-11A or -11B-12

}384B384F

334

3018

107

31073077PLCM

110

117

168

30770P

3077CP

3077T

30773077L

7979LR

12

11A11B

34543454RF

77

30770PCM

3072

73

3038

3034

334-2

334-1

Senior Swing,®

Basic parts Diagram(2800 / 9500 Series)

CAUTION: 120 VAC2.5 A TIME-DELA Y FUSE

WARNING: FOR CONTINUEDPROTECTION AGAINST FIRE,REPLACE ONL YWITH SAMETYPE AND RA TING OF FUSE.

CO

MP

ANIO

NM

OTO

R

COMPANION MASTER

CLOSESPEED

SLOW

FAST

CLOSESPEED

SLOW

FAST

: OPENING SPEED: BACKCHECK SPEED: BACKCHECK POS.: HOLD-OPEN DELA Y: LATCH POSITION: AUTO-REV . CLOSING: ELECTRIC LOCK: POWER BOOST: PUSH ‘N’ GO: ALTERNATE ACTION: SAFETY SLOW/STOP: SPECIAL: STATUS ANNOUNCEMENT

SETTING VALUE

DEFAULT

POWERON

UP

DOWN

UP

DOWN

WARNING: ALL SPEEDSETTINGS (OPENING ,CLOSING , AND LATCHING)AND HOLD-OPEN TIME-DELAY MUST BE FIELDADJUSTED TO MEETLATEST APPLICABLE ANSI/BHMA STANDARDS.

DM

SS #2AP

PRO

ACH

P5

DM

SS #2SA

FETY

P4

ELEC

TRIC

LOC

KP1

0R

ETR

OFI

TP8

BODY

GUA

RD

P1

ACTI

VAT

E

P6

ACTI

VAT

E

P7

DM

SS #1AP

PRO

ACH

P3

DM

SS #1SA

FETY

P2

LCN®

XXXX SWINGXXXX-0 0SN: XXXX

No

Ser

vice

able

Par

tsIn

side

3462




3018

3462

3351-1 29"3351-2 41"3351-3 51"

163-1

334

3034

3077PLCM

3038

73

73

72MC72FC

163

163-1

334

34543454 S

77

30773077L

3077T

7979LR

Benchmark Basic parts Diagram(9100 Series)


56

LCN REPAIR DEPARTMENT CHARGES‘REPAIR’, restores the original function of the material. Repair charges include repairing, repainting, refilling, and repackagingLCN material that is either out of warranty or not covered by warranty due to abuse. Some material may be beyond repair.Consult factory for details.

Prices Listed Below are ‘Net’ Prices in U.S. Dollars

LCN REPAIRED CLOSER WARRANTYLCN material is warranted for the remainder of its’ warranty period or for a period of two years from the date of repair, whichever is greater. Refer to LCN Warranty on back cover for full details. LCN reserves the right to decline the repair of anymaterial that has been manufactured by LCN. Repair of obsoleted material is subject to parts availability.

CLOSER SERIES PART # DESCRIPTION CATALOG SECTION REPAIR

1260 -3071 Cylinder Assy 1000 Series 80.00

1460(T) -3071 Cylinder Assy 1000 Series 105.00

2010 -3071 Cylinder Assy Concealed 150.00

2030 -3971 Cylinder Only Concealed 295.00

2210(DPS) -3071 Cylinder Assy High Security 215.00

2310ME -3071 Cylinder Assy Fire/Life Safety 345.00

2610 -3071 Cylinder Assy Automatic Operator 225.00

3030, 3130, 3130SE -3071 Cylinder Assy Concealed 120.00

4000T, 4040(T) -3071 Cylinder Assy 4000 Series 130.00

4010(T), 4020(T), 4110(T) -3071 Cylinder Assy 4000 Series 125.00

4030(T) -3071 Cylinder Assy 4000 Series 105.00

4040SE -3071 Cylinder Assy Fire/Life Safety 135.00

4040SE -3038 Track Assy Fire/Life Safety 135.00

4040XP -3071 Cylinder Assy 4000 Series 130.00

4210(T), 4510(T) -3071 Cylinder Assy High Security 130.00

4310ME, 4410ME -3971 Cylinder Only Fire/Life Safety 315.00

4630, 4640 -3971 Cylinder Only Automatic Operator 275.00

4810, 4820, 4840 -3971 Cylinder Only Automatic Operator 225.00

5010 -3071 Cylinder Assy Concealed 140.00



Please use LCN ‘Warranty & Replacement Form’ on next page and return material prepaid, to:

LCN ClosersAttn: Warranty & Replacement Dept.

121 W. Railroad Avenue,

Princeton, IL 61356

For further assistance, call:

LCN Customer Care – (877) 671-7011




Customer Mailing Address:

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

Customer Ship To (if different):

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

Customer Phone Number

( ) _____________ -_____________________

Items Included in this Return (Qty) _______

Customer Contact Name:

________________________________________________

Reference #/PO # _________________________

LCN Warranty Replacement & Repair Form‘it is as Easy as 1-2-3…’

Material Return Date (Date Sent to LCN) ____/____/____

Please use this ‘Warranty & Repair’ form to expedite your replacement or repaired material. You may copy this page, use upper portion as packing list & lower portion as return label. Please pack material carefully. Return to LCN. See current LCN price list for repair charges.

RETURN ADDRESS

LCN Closers / ingersoll randAttention: Warranty & Replacement Department

121 W. Railroad AvenuePrinceton, IL 61356

You may copy this page, use upper portion as packing list & lower portion as return label."

please check one of the following boxes:

I believe this product is under warranty. If it is not, call me before proceeding.

If product is out of warranty, please call me with cost before proceeding.

If product is out of warranty, please repair and send invoice to customer mailing address above.

If product is out of warranty, do not repair. Return to me ‘as is’

If product is out of warranty, do not repair. Dispose of at factory.

1.

2.

3.

March 5, 2012

March 5, 2012



Arm OptionsSTD - Standard ArmREG - Regular ArmRw/PA - Regular Arm with Parallel Arm ShoeRw/62A - Regular Arm with Auxiliary Parallel Arm

ShoeH - Hold Open ArmHw/PA - Hold Open Arm with Parallel Arm ShoeHD - Heavy Duty Arm (1460)HDw/PA - Heavy Duty Arm with Parallel Arm

Shoe (1460)LD - Light Duty ArmLDw/PA - Light Duty Arm with Parallel Arm ShoeLONG - Long ArmXLONG - Extra Long ArmHLONG - Hold Open Long ArmEDA - Extra Duty ArmEDAw/62G - Extra Duty Arm with Thick Hub ShoeHEDA - Hold Open Extra Duty ArmHEDAw/62G - Hold Open Extra Duty Arm w/ 62GCUSH (CNS) - Cush -n- Stop ArmHCUSH (HCNS) - Hold Open Cush -n- Stop ArmSCUSH (SCNS) - Spring Cush -n- Stop ArmSHCUSH (SHCNS) - Spring Hold Open Cush -n- Stop ArmSF - Swing Free Arm (4310ME)DE - Double Egress ArmFL - Fusible Link ArmFLw/PA - Fusible Link Arm with Parallel Arm Shoe

Cylinder OptionsSTD - Standard CylinderDEL (DA) - Delay Action CylinderAVB - Advanced Variable BackcheckB80 - Bypass 80 Degree ME CylinderB140 - Bypass 140 Degree ME CylinderTEL - Telephone Cylinder (4010/4020/4110)

Cover OptionsSTD - Standard Plastic CoverMC - Metal CoverFC - Full Cover (1460)DS (DS1) - Designer Series Cover (1460)SLIM - Slim-line Cover (1460)

Track OptionsSTD - Standard TrackH - Hold Open TrackBUMPER - Track with BumperHBMP - Hold Open Track with Bumper

Fastener Pack OptionsWMS - Wood & Machine ScrewsTBWMS - Thru-Bolt, Wood & Machine ScrewsSRT - Self Reaming & Tapping ScrewsTBSRT - Thru-Bolt, Self Reaming & Tapping ScrewsTORX - TORX Machine ScrewsTBTRX - Thru-Bolt, TORX Machine Screws

FinishesAL - Aluminum DKBRZ - Dark Bronze BRASS - BrassLTBRZ - Light BronzeSTAT - StatuaryBLACK - BlackMTLPC - Bright Metallic RAL - Custom Finish DesignationANCLR - Anodized ClearANDKB - Anodized Dark Bronze

Swing Operator TermsSF - Standard Force Motor GearboxSC - Standard ControllerPOS - Positive Mechanical StopBKY - Breakaway Stop

Miscellaneous TermsL - LongLR - Long RodELR - Extra Long RodB80 or B140 - Bypass (Fire/Life Safety)

(2310ME, 4310ME, 4410ME)SRI - Special Rust InhibitorSE - Single Point Electronic (Fire/Life Safety)ME - Multi-Point Electronic (Fire/Life Safety)PAH - Parallel Arm Holder (PAH60)ES - Electric Strike (Control Boxes)S (SEQ) - Sequential (Control Boxes)TJ - Top Jamb PA - Parallel Arm 18G - Flush CeilingT - TrackDPS - Door Position Switch (2210DPS)FP - Fire Protection Fluid

GLOSSARY OF ABBREVIATIONS

Header Options-572 - Header Extrusion Only (36" to 188"). No prep.-572HL - Header w/o Brackets (36" to 49"). Prepped.-572HL/S - Header/Prepped for Stop(s) w/o Brackets (36" to 49").-572DD - Double Door (DD) Header w/o Brackets (50" to 98"). Prepped.-572DD/S - Double Door (DD) Header/Prepped for Stop(s) w/o Brackets (50" to 98").-3572HL - Header Assembly (36" to 49").-3572HL/S - Header Assembly/Prepped for Stops (36" to 49").-3572DD - Double Door (DD) Header Assembly (50" to 98").-3572DD/S - Double Door (DD) Header Assembly/Prepped for Stops (50" to 98").


This limited warranty does not cover products that (i) are not the proper size for the application;(ii) are not installed in accordance with LCN’s published installation instructions; (iii) are installedwith improper or incorrect parts [Note: It is recommended that the products be installed with the LCN fasteners provided with the product.]; (iv) have been, in the opinion of LCN, modified,repaired, or altered in any way without the express written consent of LCN; (v) are used for purposes which they are not designed or intended; or (vi) are subjected to misuse, abuse, negligence, or accident. The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of products; (ii) shipping and freight expenses required to return products to LCN; (iii) normal maintenance; and (iv) economic losses.

LCN will replace the products which, in the opinion of LCN, are found to be defective, providedsaid products are returned to LCN, Warranty and Replacement Department, 121 West RailroadAvenue, P.O. Box 100, Princeton, Illinois USA 61356-0100.

LCN SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR ANY CLAIM WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE),PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This limited warranty is in place of all other warranties, expressed or implied, and excludes anywarranties of fitness for a particular purpose or merchantability. No agent, representative, dealer,or employee of LCN has the authority to increase or alter the obligations of this limited warranty.

Note: 900/7900 Series compressors are not manufactured by LCN and are excluded from the

coverage of the LCN limited warranty. LCN reserves the right to supply alternative compressors.

For more information, parts, or repairs concerning the compressors, contact the compressor

manufacturer directly.

Products Years

4000 Series Closers 10 Years

1000 Series Closers, Concealed Closers, High Security Closers (less 2210 DPS) 10 Years

Automatic Operators, Sentronics, SEM Magnets, 2210 DPS 2 Years

WARRANTY

LCN warrants its products manufactured after January 1, 1989 to be free from defects in materials and workmanship for a period of ten (10) years from the date of manufacturer for the 4000 Seriesand the 1000 Series products and for two (2) years from the date of manufacturer for all other products specifically listed in the table below (see Table below for products and warranty periods).

© 2012 Ingersoll Rand LC-PL-1000 Rev. 03/12 Printed in U.S.A.

www.lcn.ingersollrand.com

Ingersoll Rand's Security Technologies Sector is a leading global provider of products and services that make environments safe, secureand productive. The sector's market-leading products include electronic and biometric access-control systems; time-and-attendanceand personnel scheduling systems; mechanical locks; portable security; door closers, exit devices, architectural hardware, and steeldoors and frames; and other technologies and services for global security markets.

A

Documents

LCN Price Book 2012