Upload
garth-marx
View
223
Download
0
Embed Size (px)
Citation preview
8/3/2019 Launch Interface Ver1.02
1/25
Thank you for purchasing the Gizzmo launch Interface.This manual contains operating instructions andinstallation procedures that are needed for the fittingand operation of this product.
Instruction Manual
www.gizzmoelectronics.com
8/3/2019 Launch Interface Ver1.02
2/25
Gizzmo Electronics Ltd Warranties StatementGizzmo Electronics Limited
Limited Warranties Statement
Effective 1 January 2003
All products manufactured or distributed by Gizzmo
Electronics are subject to the following Limited Express
Warranties, and no others:
For a period of one year from and after the date of purchase
of a new Gizzmo Electronics product, Gizzmo Electronics
warranties and guarantees only to the original purchaser/userthat such a product will be free from defects of material and
workmanship in the manufacturing process. A product claimed
to be defective must be returned to place of purchase. Gizzmo
Electronics, at its sole option, shall replace the defective
product with a comparable new product or repair the defective
product. This express warranty shall be inapplicable to any
product not properly installed and properly used by the
purchaser/user or to any product damaged or impaired beexternal forces. This is the extent of Warranties available
on this product. Gizzmo Electronics shall have no liability
whatsoever for consequential damages following from the use
of any defective product or by reason the failure of any
product. Gizzmo Electronics specifically disclaims and
disavows all other warranties, express or implied including,
without limitation, all Warranties of fitness for a
particular purpose, Warranties of Description, Warranties of
Merchantability, Trade Usage or Warranties of Trade Usage.
The above warranty is valid to New Zealand only as Gizzmo
Electronics does not offer an international warranty.
1
8/3/2019 Launch Interface Ver1.02
3/25
Gizzmo launch Interface
Warnings: Incorrect installation can harm or damage the product. Gizzmo Electronics will not warranty any item that has
been damaged due to incorrect installation, or misuse of
product.
Never disassemble, modify, or tamper with unit. Failuremay cause injury or fire, and void warranty.
Gizzmo Launch Interface
The Gizzmo Launch Interface enhances the features of the
Gizzmo Tach Recall Shiftlight. The addition of the Gizzmo
Launch Interface enables the launch control function of
Gizzmo Tach Recall Shiftlight.
The launch control feature is operated using the Gizzmo TachRecall Shiftlight.
Key NoteUpon first attaching the launch controller, it will benecessary, after turning the key on and having allowed theTach Recall Shiftlight to finish its opening ceremony, pushthe rear button to switch the Gizzmo Launch Interface on.Having done this, go through the setting modes to enter thelaunch RPM setting. If the tacho is on zero, hold the TachRecalls rear button down for 1 to 1.5 minutes until the tachostarts decreasing from its highest point
2
8/3/2019 Launch Interface Ver1.02
4/25
Operating Instructions
The following operating instructions are an expanded version
of the Gizzmo Tach Recall instructions, with the GizzmoLaunch Interface settings and operations added.
1.Turn the ignition on, and start the engine running.2.Press and hold both the buttons for 2 seconds, once the
buttons are released the first stage shiftlight will
illuminate
3.Use the two buttons (up/down) to move the tacho needle tothe desired rpm for first stage.
4.Press and the hold both buttons for 2 seconds once more. Onreleasing the buttons the final stage shiftlight will
illuminate.
5.Use the two buttons (up/down) to move the tacho needle tothe desired rpm for the final stage.
6.Press and hold both the buttons for 2 seconds once more. Onreleasing the buttons the launch control light will
illuminate.
7.Use the two buttons (up/down) to move the tacho needle tothe desired launch rpm.
8.Once launch rpm is correct press both the buttons once more,the tacho will return to normal running mode. Shifts points
and launch rpm are now set.
3
8/3/2019 Launch Interface Ver1.02
5/25
Gizzmo Launch Interface Operation Notes.The launch rpm can only be set only if the launch controlis switched on. The launch control is switched on bypressing the rear button once. The tacho will then move,indicating the position of the current launch rpm, thecorresponding launch LEDs will flash. To turn off launchcontrol press the rear button once againWith the Launch Control on, the set launch rpm will bedisplayed in the start up ceremony when the ignition isswitched on.After altering the launch RPM, the ignition must beswitched off and restarted before the new setting will takeeffect.The launch features are not enabled until the Gizzmo TachRecall Shiftlight has finished its opening ceremony.
Installation Instructions
The Gizzmo Launch Interface will control up to six channels.
Determine the number channels required for your vehicle, then
follow the wiring instructions according to the number of
channels required.
NOTE: UNIT IS NOT WEATHER PROOF, INSTALL IN CABIN.Red - Computer Positive
Black - Computer Negative
Green - Igniter Trigger One ECU Side
Yellow - Igniter Trigger One Engine Side
Pink - Igniter Trigger Two ECU Side
Orange - Igniter Trigger Two Engine Side
Blue - Igniter Trigger Three ECU Side
Purple - Igniter Trigger Three Engine Side
4
8/3/2019 Launch Interface Ver1.02
6/25
Grey - Igniter Trigger Four ECU Side
Brown - Igniter Trigger Four Engine Side
Red/Blue - Igniter Trigger Five ECU Side
White/Brown - Igniter Trigger Five Engine Side
Yellow/Brown - Igniter Trigger Six ECU SideGreen/Brown - Igniter Trigger Six Engine Side
White - Com One
Connect Com One to Com One out of Gizzmo Tach Recall
Shiftlight
Key Installation Note: Igniter wires are cut and intercepted.eg. Green - Igniter Trigger One ECU SideYellow - Igniter Trigger One Engine Side
Means cut igniter trigger for coil one. Join cut ECU side of
wire to Green wire, then join cut engine side of trigger wire
to Yellow wire. The Gizzmo Launch Interface is wired in as an
interceptor.
Clutch SwitchOperation and InstallationThe Gizzmo Launch Interface utilises a reed switch to engage
and disengage the launch control function. The reed switch
needs to be fitted onto the clutch mechanism, one side
mounted on a fixed point, and the other moving with clutch
operation. Specific placement information is detailed in the
following text.
Function and PlacementWhen the switches are together (within 21mm) launch control
is disabled, meaning normal engine operation is possible. At
this point the clutch pedal should be completely disengaged.
5
8/3/2019 Launch Interface Ver1.02
7/25
To enable launch control the switches must move at approx.
25mm apart. At this point the circuit is broken and launch
control is activated. Launch control should be activating
when the clutch pedal is engaged.
Installation Notes
Launch control disabled = reed switches within 21mm of each
other
Launch control enabled = reed switches at least 26 mm apart
from each other
6
8/3/2019 Launch Interface Ver1.02
8/25
WARNINGLaunch control is high stress and high impact.The sudden release of energy may be too muchfor a vehicles gearbox and drive train.Exercise CAUTION and CARE when determining thesuitable launch rpm for your vehicle.If you have any questions consult a mechanicregarding the strength of your drive components.
Gizzmo Electronics Ltd will not be liable forany damage that may result from the use of thisproduct.
NOTEECU wiring information is supplied in thefollowing pages. The wiring information is aguideline only. On various makes and models ECUpin outs may differ from those illustrated. Aprofessional should carry out installation, andthe ECU pin out information should be checked.
7
8/3/2019 Launch Interface Ver1.02
9/25
gizzmoELECTRONICS
EP3
EK9
EK4
EG6
EG9
EJ1
CIVIC
Diagram
GH5
GH2
GH2
GH6
GH6
Year Notes
01.10~
97.6~98.8
95.8~98.8
91.9~95.8
93.2~00.8
K20A
B16A
Model EngineChassis
98.9~00.9 GH1
98.9~00.9 GH1
B16BTYPE R
B16A
B16A
DC5
DC2/DB8
BB6
INTEGRA
PRELUDE
GH5GH2
GH4
GH6
94.9~96.8
93.5~01.6
95.9~01.6K20A
93.5~95.8 GH6
96.12~98.9
91.9~96.10
B18C
B18C
B18C
Type R
M / T
A / T
BB8
BB4
H22A
H22A
GH2
EK3 D15B95.8~98.8
98.9~00.9
GH2
GH1
EG4 D15B
EF9 89.9~91.8
BB1 GH4
DA6 B16A 89.4~93.5
EJ8
EJ7
EJ6
EM1 si 99.2~00.9
D16Z 92.2~95.8
GH1
GH2
GH7
GH7
ECU Digram for HONDA
8
8/3/2019 Launch Interface Ver1.02
10/25
gizzmoELECTRONICS
DiagramYear NotesModel EngineChassis
EG2
CL1
CF3
CR-X
ACCORD/
TORNEO
GH6
GH3
00.6~02.9
D15B
H22A
F20B
92.3~95.10
89.9~92.2
00.6~02.11
F18B
GH1
GH6
EG1
EF8
B16A
B16A
CL3
CF4
97.9~00.6F20B
F22BCD5
NSX NA1 C30A 90.9~97.1
H22ACD693.9~97.8
GH1
CH9
CF6
00.6~02.10H23A
99.1~02.10
F23A
GH1
GH6
CL2
CF797.10~02.10
F22BCE1
F22ACB9
94.3~97.9
GH1ACCORDWAGON
91.3~94.2
ODYSSEY
RA1
RA2
RA3
RA4
RA5RA6
RA7F23A
J30A
F23A
F22B
99.12~
97.10~99.12
94.10~97.9
GH1
GH2
GH1
GH6
S2000 AP1 F20C 99.4~ GH1
GH7
ECU Digram for HONDA
9
8/3/2019 Launch Interface Ver1.02
11/25
gizzmoELECTRONICS
GH1
GH2
GH4
32p 25p 31p 16p
Power
Earth Ig1
Ig1
Power
Earth
32p 31p 16p
Ig1 Power
Earth
26p 22p16p 12p
GH3
Ig2
Power
Earth
Ig1 Ig6 Ig3
Ig4Ig5
26p 16p 22p12p
10
8/3/2019 Launch Interface Ver1.02
12/25
gizzmoELECTRONICS
GH5
GH7
31p 24p 17p22p
Ig1
Power
Earth Ig2Ig3Ig4
31p
Earth
Power Ig1
18p 16p20p
GH6
Caution: GH6 GH7Cut the igniter wires illustrated in the diagram. Joinboth the cut ECU side wires to the Green wire on theLaunch Interface. Join the remaining two engine sidecut wires to the Yellow wire on the Launch Interface.
Ig1 Power
Earth
26p 22p16p
11
8/3/2019 Launch Interface Ver1.02
13/25
gizzmoELECTRONICS
NB8C
NB6C
NA8C
ROADSTER
Diagram
GZ3
GZ3
GZ1
Year Notes
97.12~00.6
93.8~95.7
Model EngineChassis
97.12~00.6
BP-ZE
95.8~97.11 GZ2
89.9~93.7
B6-ZE
BP-ZE
BP-ZEH6-ZE GZ1NA6CE
FAMILIA BP-ZETBG8Z 89.8~94.3 GZ1
ECU Digram for MAZDA
12
8/3/2019 Launch Interface Ver1.02
14/25
gizzmoELECTRONICS
GZ1
GZ2
GZ326p 22p16p
Ig1 PowerEarth
Ig2
26p 22p
PowerEarth Ig1
Ig2
26p 16p 22p
Power
Earth
Ig2 Ig1
13
8/3/2019 Launch Interface Ver1.02
15/25
gizzmoELECTRONICS
CT9A
CT9A
CP9A
CN9A
CE9A
CD9A
LANCER
Diagram
GM6
GM2
Year Notes
03.1~05.2
98.1~01.1
93.12~96.7
92.10~93.11
4G63
4G63
4G63
Model EngineChassis
01.2~02.1
GM4
4G63 96.8~97.12
4G63
4G63
Z16A
DE3A
DE2A
EC5W
4G93
EC5ALEGNUM
GALLANT
GM1
GM3
GM1
GM5
GM3
GM7
96.2~97.11
94.10~96.1
4G63
4G93
90.10~99.8
94.10~96.1
6A12
96.2~97.2 GM4
96.8~02.796.8~00.5
87.10~92.4
92.5~00.5 GM2
GTO 6G72
FTO
E39A
6A136A13
CD5W
GM3
CT9A 05.3~4G63
CK4A
CM5A
CD5A
95.10~00.10
4G9391.10~95.9
4G92
GM16A12 92.5~96.7E84A
Libero
Mirage
CA4A
CJ4A
CM5A
4G92
4G93
91.10~95.9
95.10~00.5 GM4
GM2
MIVEC
MIVEC
MIVEC
GM2
GM4
MIVEC
MIVEC
97.2~00.7 GM1M/T
ECU Digram for MITSUBISHI
14
8/3/2019 Launch Interface Ver1.02
16/25
gizzmoELECTRONICS
F17A
EC1A
D32A
D33A
DIAMANTE
Diagram
GM3
GM4
Year Notes
95.1~95.12
98.8~00.4
95.9~99.84G63
Model EngineChassis
90.5~94.12 GM1
4G93
D53
GM8
GM901.2~05.9
ECLIPSE
6G72
F36A96.1~97.7
6G72
D39A
D22A
D53
89.7~91.104G63
91.10~95.9
4G64
A/T
GM2
MIVEC
MIVEC
EA1A
ASPIRE GM4
M/T
D27A
6G72
ECU Digram for MITSUBISHI
15
8/3/2019 Launch Interface Ver1.02
17/25
gizzmoELECTRONICS
GM1
GM2
GM3
GM4
26p 16p 22p
Ig1
Power
Earth
Ig2
Ig1
Ig2 Power Earth
Ig3
26p 16p 22p12p
Ig1
Ig2 Power
Earth
26p 16p 22p12p
26p 16p 22p
Ig1
Power EarthIg2
Ig3
16
8/3/2019 Launch Interface Ver1.02
18/25
gizzmoELECTRONICS
GM5
GM6
GM7
26p 16p 22p
Ig2
Ig1 Power
Earth26p 16p 22p12p
Ig1
PowerEarth
Ig2
PowerEarth
Ig1 Ig2
10p 18p 24p
GM8
26p 16p 22p
Ig1
PowerEarth
GM926p 22p
Ig1
Power Earth
16p
220 ? 1/4 W
RESISTOR220 ? 1/4 W
RESISTOR
17
8/3/2019 Launch Interface Ver1.02
19/25
gizzmoELECTRONICS
BNR34
ER34
BCR33
ECR33
BNR32
HCR32
CPV35
Z35
Z33
WGNC34
C34
A31
S15
S14
SKYKINE
LAUREL
CEFIRO
Diagram
GN3
GN3
GN3
GN3
GN8
GN8
GN2
GN3
GN7
GN3
GN5
GN4
GN1
Year Notes
99.1~01.4
95.1~98.12
93.8~94.12
89.8~94.12
03.1~
03.1~
97.11~99.8
91.1~92.1288.12~90.12
90.8~94.8
96.6~98.12
99.1~02.1
93.10~96.5
RB26DETT
SR20DET
SR20DET
SR20DE
Model EngineChassis
98.5~01.5 GN7
95.1~98.4GN3
88.5~93.7
89.7~02.6
96.9~01.2
97.6~99.8
94.9~97.5
93.1~94.8
GN3
SR20DE
GN3
GN4
RB25DET
RB26DETT
RB25DET
RB26DETT
RB20DET
VQ30DE
350Z
300ZX
VG30GETT
VG30DET
VQ30DE
STAGEAWC34
RB26DETT
RB25DET GN7
C35
C33
RB25DET
RB25DET
RB20DET
RB20DET88.9~90.7
SILVIA
93.10~98.12
GN5
G35
ECU Digram for NISSAN
18
8/3/2019 Launch Interface Ver1.02
20/25
gizzmoELECTRONICS
GN6
SILVIAPS13
S13
RPS13
PS13
RNN14
PNW10
SR20DET
SR20DE
SR20DET
91.1~93.9
96.8~99.1
89.3~90.12
95.8~98.7
90.5~98.7PRIMERA
DiagramModel EngineChassis Year Notes
GN4
GN8
GN5
GN6
GN4
GN4
GN4
SR20DET
CA18DET GN8
SR20DET
SR18DE
90.8~94.12
93.1~98.7
CA18DET 88.5~90.12
180SX 91.1~93.9
W10
PULSAR
240SX S14 KA24DE95.8~96.7
96.8~98.7 GN10
19
8/3/2019 Launch Interface Ver1.02
21/25
gizzmoELECTRONICS
GN1
GN2
GN3
GN4
GN5
16p 20p 20p20p
Earth
PowerIg2
Ig4
Ig3
Ig5 Ig6
Ig1
PowerIg1
Ig2
Ig3
Ig4 EarthIg6
Ig5
Ig1
Power
Earth
Ig4Ig3
Ig2Ig1
Power
Earth
Ig4Ig3
Ig2Ig1
Power
Earth
16p 20p 20p20p
16p 20p 20p20p
16p 16p 18p14p
16p 16p 18p14p
20
8/3/2019 Launch Interface Ver1.02
22/25
gizzmoELECTRONICS
GN6
GN7
GN8
GN9
GN10
16p 20p 20p20p
Ig4 Ig3
Ig2Ig1
Power
Earth
16p 16p 18p14p
Ig4Ig3
Ig2Ig1
Power Earth
Ig1 Ig3 Ig5
Ig2 Ig6Ig4
Power
Earth
Ig4
Ig3
Ig2
Ig1 Power
EarthIg6
Ig5
12p 24p 37p19p12p
Ig1 Power
Earth
12p 24p 37p19p12p
21
8/3/2019 Launch Interface Ver1.02
23/25
gizzmoELECTRONICS
BH5
BE5
BD5/BG5
BC5
BF5
GDFC
GDB
GDA
GC8/GF8
SF5 EJ20
LEGACY
IMPREZA
FORESTER
Diagram
GS6
GS4
GS1
GS1
GS8
GS7
GS7
GS5
GS2
GS4
Year Notes
98.6~
96.6~98.5
89.2~93.9
89.2~93.9
00.7~04.5
00.8~04.5
92.11~96.8
EJ20
Model EngineChassis
98.6~ GS6
M / T
93.10~96.5 GS2
03.1~
98.9~00.8
EJ25
96.9~98.8 GS3
98.9~
EJ20
EJ20
EJ205
EJ207
EJ20
ECU Digram for SUBARU
22
8/3/2019 Launch Interface Ver1.02
24/25
gizzmoELECTRONICS
GS1
GS2
GS3
GS4
26p 16p 22p12p
26p 16p 22p
Ig3 Ig4
Ig1
PowerEarth
Ig2
Ig3
Ig4
Ig1
Speed
Power
Ig2
26p 16p 22p12p
Power
Earth
Ig1
Ig2
Power
Earth
Ig1
Ig2
Ig3
Ig4
26p 16p 22p
23
8/3/2019 Launch Interface Ver1.02
25/25
gizzmoELECTRONICS
GS5
GS6
GS7
GS8
32p 32p 32p
34p 35p 31p
Ig3
Ig1 Power
Earth
Ig2
Ig3
Ig1 Power
EarthIg4
32p 32p 32p
PowerEarth
Ig3 Ig4Ig2Ig1
Power Earth
I 1 I 4
17p 28p 22p31p 24p
35p