7
LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product warranty. Replacement imaging drums have a one-year limited warranty from the date of installation. The imaging drum installation date displays on the supplies status page. The HP Premium Protection Warranty applies only to the print cartridges for the product. CAUTION: Do not remove the imaging drum from its package until you are ready to use it. 1. Remove the paper from the input tray. 2. Raise the camera arm to the fully open position. © 2011 Copyright Hewlett-Packard Development Company, L.P. 1

LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

LASERJET PRO 200COLOR MFP M275nw

Replace the imaging drumNOTE: The imaging drum installed in this product is covered by the product warranty. Replacement imagingdrums have a one-year limited warranty from the date of installation. The imaging drum installation date displayson the supplies status page. The HP Premium Protection Warranty applies only to the print cartridges for theproduct.

CAUTION: Do not remove the imaging drum from its package until you are ready to use it.

1. Remove the paper from the input tray.

2. Raise the camera arm to the fully openposition.

© 2011 Copyright Hewlett-Packard DevelopmentCompany, L.P.

1

Page 2: LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

3. Remove the capture stage and set it aside.

4. Open the print-cartridge door.

5. Pull the input tray straight out to remove it.

LASERJET PRO 200 2

Page 3: LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

6. Pull out on the top right portion of the frontcover, and rotate it forward to release the rightside. Remove the front cover from the product.

7. Lift the two levers that hold the imaging drum.

8. Remove the old imaging drum.

© 2011 Copyright Hewlett-Packard DevelopmentCompany, L.P.

3

Page 4: LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

9. Remove the new imaging drum from thepackaging. Place the used imaging drum inthe bag and box for recycling.

10. Remove the protective shielding from the newimaging drum.

CAUTION: To prevent damage, do notexpose the imaging drum to light. Cover it witha piece of paper.

CAUTION: Do not touch the green roller.Fingerprints on the imaging drum can causeprint-quality problems.

11. Insert the new imaging drum in the product.

12. Lower the two levers that hold the imagingdrum.

LASERJET PRO 200 4

Page 5: LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

13. Reinstall the front cover. Insert the left side first,and then rotate the cover into place.

14. Reinstall the input tray.

15. Close the print-cartridge door.

© 2011 Copyright Hewlett-Packard DevelopmentCompany, L.P.

5

Page 6: LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

16. Reinstall the capture stage.

17. Lower the camera arm.

NOTE: Lower the camera arm to protect thecamera lens cover from damage.

LASERJET PRO 200 6

Page 7: LASERJET PRO 200 COLOR MFP M275nw - HPh10032. · LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product

18. Load the paper in the input tray.

19. Adjust the guides until they are snug againstthe paper.

© 2011 Copyright Hewlett-Packard DevelopmentCompany, L.P.

7