Embed Size (px)
Citation preview
Precision Machining
Three Point Contact
Hardened Stainless Steel or Anodized Aluminum
Custom Parts Possible
Laser Marked
Serial Number for Traceability
Certified and Traceable
Features
Americas, [email protected]: 816-650-2266
[email protected] Phone: +49 30 21 78 05 67
Precision Machined
Laser Marked
Standard Drift Nest
Pin Nest Configuration
Bolt Down Drift Nest
Three Point Contact
Laser Tracker TOOLINGTS2019-385-A
Specifications
0.875”0.5”
1.5”
We Offer the Following Standard and Metric Pin Sizes
Custom Offsets and Pin Sizes Also Available
Common Offsets Include: 1”, 0.5”, 0.3125”, 25mm, 12mm, 10mmAvailable Pin SizesStandard16ths Decimals1/83/161/41/4-20 Thread5/163/87/161/25/83/47/81
0.1250.18750.2500.250 0.31250.3750.43750.5000.6250.7500.8751.000
Magnet, Yes or No
Offset
Pin Size (eg. 0.125”)
Part Specific (eg. Ball Probe Seat)
Material, Z = Stainless Steel / Y = Aluminum
Size, A = 1.5”, B = 0.875”, C = 0.5”
Bulls
eye
Tool
ing
BT - A - Z - BPS - x125 - 1 - Y
Part Number Selection & Laser Tracker Tooling Sizes:
Metric4mm5mm6mm8mm10mm12mm
www.MetrologyWorks.com27208 East 24 Highway Buckner, MO 64016
Edge Nest Configuration
Threaded Configuration
Custom Colors Available
Laser Tracker TOOLING
