LARGE MULTI POINT ENTRY SETS - MODERN RECTANGULAR …

REV A 10-15-2020

23/8” (60mm) minimum backset required

LARGE MULTI POINT ENTRY SETS - MODERN RECTANGULAR STYLE, AMERICAN CYLINDER

EMTEK PRODUCTS INC. Tel: (800) 356-2741 Fax: (800) 577-5771 emtek.com [email protected]

17 1/2" 17 1/2"

1/2"" "

Exterior Trim Interior Trim

REV A 10-15-2020


LARGE MULTI POINT ENTRY SETS - MELROSE STYLE, AMERICAN CYLINDER


2 7/8" 2 7/8"

17 1/2" 17 1/2"

1/2"


REV A 10-15-2020


LARGE MULTI POINT ENTRY SETS - ARCHED STYLE, AMERICAN CYLINDER


17 1/2" 17 1/2"

1/2"" "


3-5/8”

4-1/2"

4-1/2"

(92mm)

2-3/8”(60 mm)

minimumbackset

Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS

Steel Spindle

Rosette Screws

Cylinder Tailpiece

CONSTRUCTION KEYING

Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.

Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

• Lost ball system.• Last four pin locations drilled for lost ball application.• Master key pins used for code variability.• Construction keys and owner keys sent separately.• Order by indicating “Construction Keyed, House #_” next to applicable locks.

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside

Standard Components:• Single Cylinder Tailpiece• 4 ½” Steel Spindle• 2” Rosette Screws

Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 ½” Rosette Screws for 1 5⁄8” thick door

Extended Components:• Long Single Cylinder Tailpiece• 5” Steel Spindle• 2 ½” Rosette Screws• 3” Cylinder Screw

Extended Components:• Long Thumbturn Tailpiece• 4 ½” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 ½” Rosette Screws• 2” Rosette Screws for 2” - 2 1⁄8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)

Standard Door Thickness: from 15/8” to 2”

Standard Door Thickness: from 15/8” to 2”

Extended Door Thickness: Over 2” to 23/8”

Extended Door Thickness: Over 2” to 23/8”

CylinderScrew

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.LARGE MULTI POINT ENTRY SETS Specification Sheet for Components and Door Thickness

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

Non-Keyed with Cylinder Plugs, Passage (for Semi-Active Door)

Non-Keyed with Cylinder Plug, American Style Thumbturn Inside (for Active Door)

Non-Keyed with Cylinder Plugs, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

Dummy Pair with Cylinder Plugs (for Non-Active Door)

3-5/8” 12-1/2”

1/2”

3-5/8” 12-1/2”

1/2”

Fixed

Fixed

Fixed Fixed

Fixed Fixed

American Cylinder Above Handle





American Cylinder Below Handle





Cylinder Plug

REV A 10-15-2020


LARGE MULTI POINT ENTRY SETS - MODERN RECTANGULAR STYLE, EURO CYLINDER


17 1/2" 17 1/2"

1/2"" "


REV A 10-15-2020


LARGE MULTI POINT ENTRY SETS - MELROSE STYLE, EURO CYLINDER


2 7/8" 2 7/8"

17 1/2" 17 1/2"

1/2"


REV A 10-15-2020


LARGE MULTI POINT ENTRY SETS - ARCHED STYLE, EURO CYLINDER


17 1/2" 17 1/2"

1/2"" "


Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

3-5/8”

4-1/2"

4-1/2"

(92mm)

LARGE MULTI POINT ENTRY SETS Specification Sheet for Components and Door Thickness

CUSTOM KEYINGCharge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.

Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.

Steel Spindle

Rosette Screws

Full Euro Profile Cylinder

CylinderScrew

Full Euro Profile Cylinder Half Euro Profile Cylinder

CY4-ERSGL35

CY4-ERSGL32 CY4-ERHLF19TT

CY4-ERHLF21TT

Keyed Plates with Euro Profile Cylinder

• 3 5⁄32” (3.16”) Euro Profile Cylinder• 4 ½” Steel Spindle• 2” Rosette Screws

• 3 17⁄32” (3.54”) Euro Profile Cylinder• 5” Steel Spindle• 2 ½” & 3” Screws

Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/8”

• 1 31⁄32” (1.98”) Euro Profile Cylinder• 4 ½” Steel Spindle• 2” Rosette Screws

• 2 5⁄32” (2.15”) Euro Profile Cylinder• 5” Steel Spindle• 2 ½” & 3” Screws

Non-Keyed Plates with Euro Profile Half Cylinder


Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)

• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 ½” Rosette Screws for 1 5⁄8” thick door

• 4 ½” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 ½” Rosette Screws• 2” Rosette Screws for 2” - 2 1⁄8” thick door


2-3/8”(60 mm)

minimumbackset

Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS

Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)

Non-Keyed with Cylinder Plugs, Passage (for Semi-Active Door)

Non-Keyed with Cylinder Plug, Euro Profile Style Thumbturn Inside (for Active Door)

Non-Keyed with Cylinder Plugs, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

Dummy Pair with Cylinder Plugs (for Non-Active Door)

3-5/8” 12-1/2”

1/2”

Fixed

Fixed Fixed

Euro Cylinder Below Handle





Cylinder Plug

Documents

LARGE MULTI POINT ENTRY SETS - MODERN RECTANGULAR …