ANGLE PLATES• 24” X 80” X 18” Angle Plates (Pair)• 12” X 40” X 30” Angle Plates (Pair)• Miscellaneous Single Plates, Including 32” X 36” X 24”;

24” X 36” X 28”; 24” X 28” X 14”; and 18” X 60” X 12”, plus numerous additional plates

T-SLOTTED FLOOR PLATE • 72” X 144” T-Slotted Floor Plate, 12” High

TOOLING, INSPECTION ITEMS & MISC. SHOP ITEMS• Mills, Drills, Reamers, Taps, Dies, 50 Taper Holders, Kurt Vises,

Miscellaneous Vises, Welding Items, Wohlhaupter UPA5 Boring Head, Narex Model VHU Boring Head, Dividing Heads, Parallels, V-Blocks, Clamps, Lathe Chucks, Troyke Rotary Tables, Super Spacers, Sine Plates, 25 Ton Crane Rails, Heavy Duty Machine Carts, Economy Walk Behind Lift, Pallet Jacks, Chain, Straps, Bind-ers, Hand Tools, Power Tools, Air Tools, Hardware

PUBLIC AUCTION

3519 St. Rt. 235Fairborn, Ohio 45324

Pre-Sort First ClassU.S. POSTAGE

P A I DDayton, Ohio

Permit No.1315

Steve Thompson, Auctioneer, Ohio License #63199566109937-426-8446 • thompsonauctioneers.com

PUBLIC AUCTION PUBLIC AUCTIONPUBLIC AUCTION

PUBLIC AUCTIONPUBLIC AUCTION

Giddings and Lewis Horizontal Boring

Mill (1 of 5)

TUESDAY, MAY 12 • 9:00 A.M.Inspection: Monday, May 11 • 9:00 A.M. - 4:00 P.M.

LARGE CAPACITY MACHINING & FABRICATING FACILITY

FEATURING: Kearns-Richards 5” Horiz. Boring Mill, New 1977

Giddings and Lewis 360-F Horiz. Boring Mill(2) Giddings and Lewis 350-T Horiz. Boring Mills(3) Giddings and Lewis 340-T Horiz. Boring Mills

Cincinnati Gilbert Horiz. Boring Mill • Consolidated 86” Vertical Boring MillGray Open Side Planer Mill • Horizontal Wheel Press

Gleason #40 and #24 Spiral Bevel Hyproid Gear Generators(8) Miller Mig and Tig Welders*(4) Clark Fork Lifts

(7) Aronson, Ransome and Cullen Friestedt Welding PositionersVidmar Style Tool Cabinets • Hand Tools • Power Tools • Maintenance Items

Large Amount Inspection Items & Perishable ToolingShop Support Items • Numerous Additional Items!

FEATURING: Kearns-Richards 5” Horiz. Boring Mill, New 1977 • Giddings and Lewis 360-F Horiz. Boring Mill

(2) Giddings and Lewis 350-T Horiz. Boring Mills • (3) Giddings and Lewis 340-T Horiz. Boring MillsCincinnati Gilbert Horiz. Boring Mill • Consolidated 86” Vertical Boring Mill

Gray Open Side Planer Mill • Horizontal Wheel Press • Gleason #40 and #24 Spiral Bevel Hyproid Gear Generators(8) Miller Mig and Tig Welders • (4) Clark Fork Lifts • (7) Aronson, Ransome and Cullen Friestedt Welding Positioners

Vidmar Style Tool Cabinets • Large Amount Inspection Items & Perishable Tooling • Hand ToolsPower Tools • Maintenance Items • Shop Support Items • Numerous Additional Items!

LARGE CAPACITY MACHINING & FABRICATING FACILITY6150 Center Road • Lowellville (Youngstown), Ohio

TUESDAY, MAY 12 • 9:00 A.M. Inspection: Monday, May 11, 9:00 a.m. - 4:00 p.m.

Bid Live, On-Line at bidspotter.com!

Gleason Spiral Bevel and Hypoid Gear Generator

DIRECTIONS: From Downton Youngstown, Ohio, take I-680 South, approximately 5 Miles to Exit 11B, U.S. Route 224/Center Road. Take U.S. Route 224/Center Road East, 5.1 Miles to Auction Site, Left Hand Side, 6150 Center Road. Watch for Signs!!

Kearns Richards Model SF125, 5” Horizontal Boring Mill

For pre-approval fi nancing options, call Casey Goodell, Direct Capital, at 603-766-9365.

Steve Thompson, Auctioneer, Ohio License #63199566109937-426-8446 • thompsonauctioneers.com

TERMS: Everything sells on an “As is, where is, in place basis, with all defects whether apparrent or not. There are NO warranties or guarantees of any kind. It is the buyer’s responsibility to inspect before bidding. Everything must be paid for in full the day of the auction with cash, check with proper ID, Visa, MC or Discover. There is a 12% buyer’s Premium in effect for this auction. If you use a credit card there is a 15% buyers premium.

BID-SPOTTER TERMS: ALL BIDSPOTTER PARTICIPANTS MUST PRE-REGISTER 24 HOURS PRIOR TO THE START OF THE AUCTION. A 15% Buyer’s Premium is in effect if you bid through bidspotter.com, and pay with cash, wire transfer, or check. An 18% Buyer’s Premium is in effect if you bid through bidspotter.com, and pay with credit card. All other terms of on-site buyers apply to bidspotter bidders.

IF YOU CANNOT ATTEND: Bid Live, Online at bidspotter.com or fax the items you want to bid on with your max price. We will bid on your behalf. Include a credit card number for downpayment in the event you are the successful bidder. Fax #: (937) 878-6161

LARGE CAPACITY MACHINING & FABRICATING FACILITY

Cincinnati Gilbert Horizontal Boring Mill Gleason #24 Gear Generator

Partial View, Inspection Items Partial View, Tool Cabinets

LARGE CAPACITY MACHINING & FABRICATING FACILITY6150 Center Road • Lowellville (Youngstown), Ohio

TUESDAY, MAY 12 • 9:00 A.M.

TOOLING, INSP. ITEMS & MISC. ITEMS - CON’T.• Pedestal Grinders, Sanders, Dumore Tool Post Grinders,

Micrometers, Calipers, Bore Gages, Granite Surface Plates, Morse Taper Tool Holders, Aloris Tooling, PDQ Quick Change Tooling, Carbide Inserts, Broaches, Lathe Tooling, C-Clamps, Screw Jacks, Chain Hoists, Pedestal Fans, Cabi-nets, Storage Racks, Carts, Cantilever Steel Racks, Pallet Shelving, Steel Saw Horses, (12) Stanley Vidmar Cabinets, Lista Cabinets, Steel Layout Table, Banding Cart, Oxy-Acet Torches, Knaack and Greenlee Job Boxes, Clevices, Shackles, Lifting Magnets, Makita Electric Hammer, (2) Trumpf Hand Bevelers, Kobart Impact Wrench, Fork Lift Man Lift Basket, (2) Harrington 20 Ton Hoists, Heavy Duty Welding Tables, Weldscale 5’ X 8’ Acorn Table with Clamps and Wedges, Transformers, Coffi ng, Budget and Yale Hoists, Dump Hoppers, Numerous Additional Items

LARGE CAPACITY MACHINING & FABRICATING FACILITY

Rotary Table, Several Available Acorn Welding Table

1 of 5

Consulting Firm:

HORIZONTAL BORING MILLS• Kearns Richards Model SF-125 Table Type Horizontal Boring and

Facing Mill, s/n 6982, New 1977, 5” Spindle, 50 Taper, Power Drawer Bar, Facing Head, 71” X 71” Built in Rotary Table, 71” X 143” Overall Table Size with Extensions, Dual Outriggers, 79” Vertical Travel, 118” Table Travel, 90.5” Cross Travel, 30” Spindle Travel, Omniversal Milling Head Attachment, 40” Boring Extension, 18” Boring Extension, Spindle Support Sleeve, Updated Siemens Drives

• Giddings and Lewis Model 340T Table Type Horizontal Boring Mill, s/n 150-114-56, 4” Spindle, 50 Taper, Power Drawer Bar, 48” X 98” Table, 72” Vertical Travel, 88” Table Travel, 48” Saddle Travel, Outriggers, Mitutoyo D.R.O.

• Giddings and Lewis Model 340T Table Type Horizontal Boring Mill, s/n 150-258-57, 4” Spindle, 50 Taper, Power Drawer Bar, 60” X 98” Table, 48” Vertical Travel, 88” Table Travel, 68” Saddle Travel, Outriggers, Newall D.R.O.

• Giddings and Lewis Model 340T Table Type Horizontal Boring Mill, s/n 150-291-57, 4” Spindle, #5 MT, 36” X 74” Table, 60” Vertical Travel, 58” Saddle Travel, 60” Table Travel, Trak D.R.O.

HORIZONTAL BORING MILLS• Giddings and Lewis Model 350T Table Type Horizontal Boring Mill,

s/n 5994, 5” Spindle, #5 MT, 48” X 74” Table, 48” Vertical Travel, 74” Table Travel, 66” Saddle Travel, Outboard Support, Trak 3-Axis D.R.O.

• Giddings and Lewis Model 350T Table Type Horizontal Boring Mill, 5” Spindle, #5 MT, 60” X 98” Table, 60” Vertical Travel, 84” Table Travel, 90” Saddle Travel, Outriggers, Newall C-80 D.R.O.

• Cincinnati Gilbert Horizontal Boring Mill, s/n 350, 3.5” Spindle, 43” X 65” Table, 60” Vertical Travel, 52” Table Travel, 80” Saddle Travel, #4 MT, Outboard Support, Newall C80 D.R.O.

• Giddings and Lewis Model 360F Horizontal Boring Mill, s/n 5728, 6” Spindle, 50 Taper, Note: Machine Disassembled, Not in Service

VERTICAL BORING MILL• Consolidated Machine Vertical Boring Mill, 82” T-Slotted Table

Diameter (Including 4 Jaws), 86” Maximum Part Diameter, (2) Adjustable Angle Boring Heads, 50” Maximum Under the Rail, Power Rail Traverse, 40 HP Main Drive, Pendant Control, Updated Electrics

OPEN SIDE PLANER MILL• Gray Open Side Planer Mill, 38” X 146” Table, 150” Table Travel,

40” Cross Travel on Milling Head, 36” Vertical Overarm Travel, 40” Max/ Under the Overarm, 20 HP Vertical Milling Head, 115 to 1,150 RPM, Adj. Swivel Planer Head, Side Head, Newall 3-Axis D.R.O.

GEAR GENERATORS• Gleason #40 Spiral Bevel and Hypoid Gear Plaining Generator,

s/n 12162• Gleason #24 Straight Bevel Coniflex Gear Generator, s/n 22888

HYDRAULIC IRONWORKER• Edwards “Jaws 4” Hydraulic Ironworker, 55 Ton Capacity,

3” X 3” X 3/8” Angles

WELDING POSITIONERS• Aronson Model HD-30 Welding Positioner, 3,000 Lb. Capacity,

36” X 36” Table, Power Tilt and Rotation, Pendant Control• Aronson Model HD-25 Welding Positioner, 2,500 Lb. Capacity,

36” X 36” Table, Power Tilt and Rotation, Pendant Control• Ransome Welding Positioner, 3,000 Lb. Estimated Capacity, Power

Tilt and Rotation, Pendant Control• Cullen Friestedt Model 60 Welding Positioner, s/n 333, 6,000 Lb.

Cap., 33” X 34” Table, Power Tilt and Rotation, Pendant Control• Cullen Friestedt Model 12 Welding Positioner, s/n 12-115,

1,200 Lb. Capacity , Power Tilt and Rotation, Pendant Control

WELDING MANIPULATOR• Aronson Model 0100-100 Welding Manipulator, s/n 6915170-110,

1,000 Lb. Capacity, 3’ x 3’

DRUM TURNING ROLLS• Morse Model 1-5154-1 Drum Turning Rolls, s/n 9909, 1,000 Lb.

Capacity• Gullco Model KP-1000-80 Variable Speed Drum Turning Rolls,

s/n 83145-3

WELDERS• Miller Deltaweld 452 CV DC Mig Welder, s/n KF974533• Miller Deltaweld 651 CV DC Mig Welder, s/n JJ514795, with

Miller DVC DW-1 Wire Feeder• Miller Deltaweld 651 CV DC Mig Welder, s/n JJ507866, with

Miller DVC DW-1 Wire Feeder• Miller Deltaweld 451 CV-DC Welding Power Supply, s/n JK626051• Miller Deltaweld 650 CV-DC Welding Power Supply, s/n JD669869• Miller FC-600 Welding Power Supply, s/n 5419035• Miller FC-600 Welding Power Supply, s/n 70-541800• Miller SRH-333 DC Welding Power Supply, s/n N31183• Airco 300 AC/DC Heliwelder Tig Welder, s/n MH910048, 300 Amp,

with Miller Chiller• Hobart Excel-Arc 500 CC Mig Welder, s/n 93WS12384

FORK LIFTS• Clark Model C500 135LPG Fork Lift, s/n 915-04-5680CB114,

13,000 Lb. Capacity, LP, Hard Tire, Cage, 2-Stage Mast, 8’ Forks, 8,518 Hours

• Clark Model C500-100 Fork Lift, s/n 46854494245, 10,000 Lb. Capacity, LP, Hard Tire with Dual Front Wheels, Enclosed Cab, 3-Stage Mast, 6’ Forks

• Clark Model TM12 Electric Fork Lift, s/n TM127-0080-4903FA, 3-Wheel, 2,500 Lb. Capacity, Cage, 3’ Forks, 3,294 Hours

• Raymond Model 902-40-E4RTT Electric Stand On Fork Lift, s/n 902-E4RTT-1027, 4,000 Lb. Capacity, 4’ Forks, 24 Volt

AUTOMATIC SURFACE GRINDER• Mattison 24” X 60” 2-Axis Automatic Surface Grinder, s/n 19121,

Power Elevation to Wheel, Magna-Lock 24” X 60” Electric Chuck with Controls, Over the Wheel Dresser, Mitutoyo D.R.O.

VERTICAL MILL• Bridgeport 1 1/2 HP Variable Speed Vertical Mill,

s/n 12BR146615, 9” X 42” Table, Newall C-80 D.R.O., Power Table Feed

TILT FRAME VERTICAL BAND SAW• Marvel Series I, Mark 8 Tilt Frame Vertical Band Saw,

s/n 822630-W, 18” X 22” Capacity

MISCELLANEOUS MACHINE TOOLS• Horizontal Hydraulic Wheel Press• Cincinnati Bickford 4’ X 9” Radial Arm Drill, s/n 1R1813,

Box Table• Hammond Double End Snag Grinder• Standard Double End Snag Grinder, Model D• Kalamazoo Model 13AW Horizontal Band Saw, s/n 106• Gleason Gear Checking Machine• Gleason Gear Grinder• Electro-Arc Model 3S Tap Disintegrator, s/n 3714• Delta Model 15-000 Single Spindle Drill Press, s/n 1316925, 15”,

Variable Speed• Famco #4R Ratchet Type Arbor Press• Rockwell 6” X 48” Belt Sander

ROTARY TABLES• Rotab 24” Power Rotary Table• Giddings and Lewis Model 48 Manual Rotary Table, 48” X 48”,

s/n A4863• Giddings and Lewis Model 36 Manual Rotary Table, 36” X 36”• Performance Machine Model HP-RT-360 Motorized Rotary Table,

36” Diameter, T-Slotted• 61” Diameter T-Slotted Rotary Table

PUBLIC AUCTIONPUBLIC AUCTION

Edward Hydraulic Ironworker Cullen Friestedt Welding Positioner (1 of 2)

Aronson Welding Positioner (1 of 2) Partial View, Miller Welders

Giddings and Lewis Horizontal Boring Mill (1 of 5) Giddings and Lewis Horizontal Boring Mill (1 of 5)

H.B. 3 HP VERTICAL MILL

TUESDAY, MAY 12 • 9:00 A.M.TUESDAY, MAY 12 • 9:00 A.M.

Marvel #81 Tilt Frame Vertical Band Saw Mattison 24” X 60” Automatic Surface Grinder Gray Open Side Planer Mill

Consolidated 86” Vertical Boring Mill

Aronson Welding Positioner (1 of 2) Ransome Welding Positioner Giddings and Lewis Horizontal Boring Mill (1 of 5)

Clark 10,000 Lb. Capacity Fork Lift Clark 13,000 Lb. Capacity Fork Lift

Thinking of an Auction? Need an Appraisal? Know of a Plant Closure? Call Steve Thompson or Bryan Harvey • 937-426-8446 or 937-609-6354 • www.thompsonauctioneers.com

1 of 2

1 of 5 1 of 2

1 of 5

1 of 2