LARGE BEACON STEM MOUNT (LBS) · GP-Green Patina* Bronze BZP BZW AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone NIC-Nickel Plate* Black BLP BLW AQW Antique

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

40429 Brickyard Drive • Madera, CA 93636 • USA559.438.5800 • FAX 559.438.5900

www.tekaillumination.com • [email protected]

RELEASED

12-12-2017DRAWING NUMBER

SUB-2690-00

CATALOG NUMBER LOGICLBS LED BW

Example - LBS - 6 - SD27 - LED - X43 - BW - BLP - A - - - HSR

MaterialBlank - Aluminum (Must specify Aluminum Rings.)

C - Copper (Must specify Brass or Stainless Steel Rings.)

SeriesLBS - Large Beacon Stem Mount

Stem Length (Specify Inches)

- 6", 12", 18", 24", 30", 36", 42", 48", 54", 60"

StyleSD27 - 27 Inch ShadeSD35 - 35 Inch Shade

SourceLED - Power of 'X' Technology with Chip on Board Construction

LED TypeX43 - 34WLED/2.7K X46 - 42WLED/2.7K X49 - 57WLED/2.7KX44 - 34WLED/3K X47 - 42WLED/3K X50 - 57WLED/3KX45 - 34WLED/4K X48 - 42WLED/4K X51 - 57WLED/4K

OpticBW - Batwing

FinishNAT - Natural* Powder Coat Standard Finish Powder Coat Premium Finish

BP - Brown Patina* Powder Coat Color Satin Wrinkle ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite

GP - Green Patina* Bronze BZP BZW AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone

NIC - Nickel Plate* Black BLP BLW AQW Antique White CRM Cream SMG Sierra Mountain Granite

BZW - Bronze Wrinkle White (Gloss) WHP WHW BCM Black Chrome HUG Hunter Green TXF Textured ForestSee Powder Coat Finish Chartto the right for additional choices.*Not available with Aluminum. For Aluminum fixtures, specify Standard or Premium Powder Coat.

Aluminum SAP — BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper

Verde — VER BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron

CAP Clear Anodized Powder OCP Old Copper Also available in RAL FinishesSee submittal SUB-1439-00

RingsA - Aluminum B - Brass S - Stainless Steel

(Finish to match Fixture.) (Finish to match Fixture.) (Stainless Steel Rings are provided in Natural (NAT) regardless of Finish.)

Accessories (Select one.)

DT - Dark Top (Eliminates glow in upper window. Material and Finish to match fixture.)

MSH - Mesh Screen (Material and Finish to match Fixture.)

OptionsCLR - Clear Coat Protection For use with Natural (NAT) Finish only. For use with Copper Fixture only.

Mounting HSR - Hang Straight Round (Material and Finish to match Fixture.)

HSQ - Hang Straight Square (Material and Finish to match Fixture.)

LARGE BEACON STEM MOUNT (LBS)PROJECT:

TYPE:

CATALOG NUMBER:

SOURCE: Power of 'X' Technology with Chip on Board Construction

NOTES:

LBS LED BW



RELEASED


SUB-2690-00

SIDE VIEW

PROJECT:

TYPE:

LARGE BEACON STEM MOUNT (LBS)

All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications.

SPECIFICATIONSGreenSource Initiative™Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.tekaillumination.com/greensource for program requirements.

MaterialsCopper and Brass: Constructed from copper and brass. These enduring metals are inherently corrosion resistant.Aluminum: Constructed from Copper-Free aluminum (Type 6061-T6)

ShadeHand spun from 16GA 3003-H14 aluminum or 16GA C101 copper Specify 27" or 35" diameter.

Body360 Aluminum Cast or C836 Red Brass cast. High temperature, silicone gasket provides water tight seal to shade assembly.

Lens6" dia. frosted acrylic lens with frosted acrylic downlight lens provides sealed optical compartment.

StemFully Machined 7/8"OD X 1/8" Wall ASTM 6061-T6 Aluminum Tube or 7/8"OD X 1/8" Wall ASTM C360 Brass. Available in configurable lengths 6" Minimum and 60" maximum overall.

Rings6061-T6 Aluminum Ring, 360 Brass Ring or 304 Stainless Steel Ring (Specify Separately).

Hang Straight Canopy4" Round Hang Straight mounting plate with 20° swivel angel. Canopy conceals mounting plate avaliable in 5-5/8" Round or 5-5/8"x5-5/8" Square. Made from Hand Spun 16GA-3003-H14 Aluminum or 16GA-C101 Copper.

Mesh ScreenDiffuses light in window. Material and Finish to match fixture.

Dark TopEliminates glow in window above shade. Material and Finish to match fixture.

Installation4" diameter, machined aluminum mounting plate with black finish. For use with 4" octagonal junction box.

BKSSL®Integrated solid state system with ‘X’ technology is scalable for field upgrade. Modular design with electrical quick disconnects permit field maintenance. Minimum 50,000 hour rated life at 70% of initial lumens (L70). BKSSL® technology provides long life, significant energy reduction and exceptional thermal management.

Color ManagementChip on board technology delivers natural white light. Exact color point conformity exceeds ANSI C78.377 standard. Module exceeds 80 CRI (RA>80, R9.16). Color point uniformity 2 SDCM color control for 2700K-4000K CCT.

Remote DriverFor use with remote LED Driver. See remote driver submittal(s) to determine remote distance, dimming range, and wiring requirements prior to detailing field installation of any remote wiring.

WiringTefzel® coated wire, 18AWG, 600V, 150° C rated and certified to UL 1569 standard.

Finish

Copper and Brass: Natural (NAT): Copper and brass components are sand blasted to expose the porous metal surface. Over time, and with exposure to the elements, the metals will naturally ‘weather’ resulting in a unique patina.

Also available with hand-crafted metal finishes including brown patina (BP), green patina (GP), polish (POL), and nickel plate (NIC).

Copper and brass components are also available in powder coat finishes.

Optional ceramic clear coat protection (copper and brass components only) seals and protects underlying metals and protects against discoloration, fading, and wear. Highly impervious to chemicals, solvents, and graffiti. For use with natural (NAT) and polish (POL) finishes.

Aluminum: StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating.

Warranty5 year limited warranty.

ListingsUL tested to IESNA LM-79. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. Additionally suitable for installation within 4’ of the ground. IP65 Rated. Made in USA.

® Energy Star is a registered trademark of the United States Environmental Protection Agency.

™ Tefzel™ is trademark of The Chemours Company FC, LLC.

(SD35 Style shown with Hang Straight Square Canopy)

(SD27 Style shown with Hang Straight Round Canopy)27 1/8" Dia.(689mm)

VariableStem

Length5 5/8" Dia.(143mm)

10 7/8"(277mm)

3 15/16"(100mm) 8 3/8" Dia.

(213mm)

1 1/2"(39mm)

6 3/8"(162mm)

35 1/8" Dia.(893mm)

VariableStem

Length5 5/8"

(143mm)

13"(331mm)

1 13/16"(47mm) 8 3/8" Dia.

(213mm)

1 1/2"(39mm)

6 3/8"(162mm)

B-K LIGHTING 40429 Brickyard Drive • Madera, CA 93636 • USA559.438.5800 • FAX 559.438.5900

www.bklighting.com • [email protected]

RELEASED


SUB-2692-00

LAMP DATAx43, x44, x45, x46, x47, x48, x49, x50, x51

LM79 DATA L70 DATA OPTICAL DATA

BK No.CCT

(Typ.)CRI

(Typ.)Input Watts

(Typ.)Minimum Rated Life (hrs.)70% of initial lumens (L70)

Optic Delivered Lumens

x43 2700K 80 34W 50,000 BW 3084

x44 3000K 80 34W 50,000 BW 3197

x45 4000K 80 34W 50,000 BW 3354

x46 2700K 80 42W 50,000 BW 3348

x47 3000K 80 42W 50,000 BW 3533

x48 4000K 80 42W 50,000 BW 3588

x49 2700K 80 57W 50,000 BW 3849

x50 3000K 80 57W 50,000 BW 4318

x51 4000K 80 57W 50,000 BW 4385

PROJECT:

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:

NEMA 3R Remote Driver Housing

Constant Current Driver

3 3/8"(86mm)

SUB-1799

SURFACE MOUNT REMOTE BOX

3 3/4"(95mm)

5 1/2"(140mm)

4 3/8"(111mm) 6 1/4"

(159mm)

8 1/8"(206mm)

CATALOG NUMBER LOGIC

DRIVER ELECTRICAL DATA TYPE AC INPUT

RANGEFREQUENCY

HZ DIMMING POWER FACTORAT FULL LOAD THD OPERATING AMBIENT

TEMPERATURE DIMMER TYPE DIMMERRANGE

IN RUSHCURRENT

D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C (-4°F to 122°F) 0-10V 1-100% <30mA

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C (-4°F to 122°F) 0-10V 1-100% <30mA

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C (-4°F to 122°F) 0-10V 10-100% <30A

D34ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C (-4°F to 122°F) 0-10V 0.1-100% <30mA


RM MT

Example RM - D34 - SAP - MT

Remote Driver Housing RM - NEMA 3R Remote Driver Housing

(Specify Fixture Separately)

Driver Type For use with 0-10 Dimmer: D34 - 34W Dimming Driver (Standard Dimming 1-100%)

D42 - 42W Dimming Driver (Standard Dimming 1-100%)

D57 - 57W Dimming Driver (Standard Dimming 10-100%)

D34ARC - 34W Dimming Driver (Architectural Dimming 0.1-100%)

D42ARC - 42W Dimming Driver (Architectural Dimming 0.1-100%)

Finish

Input Voltage MT - 120-277 VAC Input

REMOTE WIRING

LED DriverRemote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations:

• Do not exceed 50 foot overall wiring distance using 12 gauge copper wire.

Failure to comply with specific wiring requirements will void product warranty.

Powder Coat Color Satin Wrinkle

Bronze BZP BZW

Black BLP BLW

White (Gloss) WHP WHW

Aluminum SAP —

Verde — VER

Standard Finish Premium Finish

ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite

AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone

AQW Antique White CRM Cream SMG Sierra Mountain Granite

BCM Black Chrome HUG Hunter Green TXF Textured Forest

BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper

BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron





RELEASED


SUB-2699-00

GreenSource Initiative™Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.tekaillumination.com/greensource for program requirements.

InstallationNema 3R, surface mount design. For use with remote fixture (specified separately).

HousingSteel construction with screw cover. Front access for ease of installation and inspection. [2] bottom entry, 3/4” conduit knockouts.

Wiring / Connectors Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard. Pre-wired and labeled terminal strip.

Driver (34-57W)[1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <10.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range.

FinishStarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating.


ListingsNEMA 3R Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA.

®Teflon is a registered trademark of DuPont Corporation.

SPECIFICATIONS

PROJECT:

TYPE:

SIDE VIEW BACK VIEW

3 3/8"(86mm)

SUB-1799


3 3/4"(95mm)

5 1/2"(140mm)

4 3/8"(111mm) 6 1/4"

(159mm)

8 1/8"(206mm)

3 3/8"(86mm)

SUB-1799


3 3/4"(95mm)

5 1/2"(140mm)

4 3/8"(111mm) 6 1/4"

(159mm)

8 1/8"(206mm)

3 3/8"(86mm)

SUB-1799


3 3/4"(95mm)

5 1/2"(140mm)

4 3/8"(111mm) 6 1/4"

(159mm)

8 1/8"(206mm)

END VIEW

NEMA 3R Remote Driver Housing


3 3/8"(86mm)

SUB-1799


3 3/4"(95mm)

5 1/2"(140mm)

4 3/8"(111mm) 6 1/4"

(159mm)

8 1/8"(206mm)



RELEASED


SUB-2699-00

PROJECT:

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:

NEMA 3R Dual Remote Driver Housing



SUB-1815

7 7/8"

5 3/4"

3 3/8"

4"8"

12"


DRIVER ELECTRICAL DATA TYPE AC INPUT

RANGEFREQUENCY

HZ DIMMING POWER FACTORAT FULL LOAD THD OPERATING AMBIENT

TEMPERATURE DIMMER TYPE DIMMERRANGE

IN RUSHCURRENT

D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C (-4°F to 122°F) 0-10V 1-100% <30mA

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C (-4°F to 122°F) 0-10V 1-100% <30mA

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C (-4°F to 122°F) 0-10V 10-100% <30A



REMOTE WIRING





Bronze BZP BZW

Black BLP BLW


Aluminum SAP —

Verde — VER









DRM MT

Example DRM - D34 - SAP - MT

Remote Driver Housing DRM - NEMA 3R Remote Driver Housing

(Specify Fixture Separately)

Driver TypeFor use with 0-10 Dimmer: D34 - (2) 34W Dimming Driver (Standard Dimming 1-100%)

D42 - (2) 42W Dimming Driver (Standard Dimming 1-100%)

D57 - (2) 57W Dimming Driver (Standard Dimming 10-100%)

D34ARC - (2) 34W Dimming Driver (Architectural Dimming 0.1-100%)

D42ARC - (2) 42W Dimming Driver (Architectural Dimming 0.1-100%)

Finish

Input Voltage MT - 120-277 VAC Input




RELEASED


SUB-2700-00


InstallationNema 3R, surface mount design. For use with remote fixtures (specified separately).

HousingSteel construction with screw cover. Front access for ease of installation and inspection. [2] bottom entry, 3/4” conduit knockouts.

Wiring / Connectors Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard. Pre-wired and labeled terminal strip.

Driver (34-57W)[2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range.



ListingsNEMA 3R Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA.

®Teflon is a registered trademark of DuPont Corporation.

PROJECT:

TYPE:

NEMA 3R Dual Remote Driver Housing



SUB-1815

7 7/8"

5 3/4"

3 3/8"

4"8"

12"

SPECIFICATIONS

FRONT VIEW SIDE VIEW

12 1/8"(308mm)

8 1/4"(210mm)

4 3/8"(111mm)

4 3/8"(111mm)

8 1/4"(210mm)

5 3/4" O.C.(146mm)

7 1/2" O.C.(191mm)

9 7/16" O.C.(240mm)

3 7/8" O.C.(98mm)

3 1/4"O.C.(83mm)

2X 1/2" Conduit

3 1/4"O.C.(83mm)

2X 3/4" Conduit

DRMS001125

DRMS001125

END VIEW

12 1/8"(308mm)

8 1/4"(210mm)

4 3/8"(111mm)

4 3/8"(111mm)

8 1/4"(210mm)

5 3/4" O.C.(146mm)

7 1/2" O.C.(191mm)

9 7/16" O.C.(240mm)

3 7/8" O.C.(98mm)

3 1/4"O.C.(83mm)

2X 1/2" Conduit

3 1/4"O.C.(83mm)

2X 3/4" Conduit

DRMS001125

DRMS001125

12 1/8"(308mm)

8 1/4"(210mm)

4 3/8"(111mm)

4 3/8"(111mm)

8 1/4"(210mm)

5 3/4" O.C.(146mm)

7 1/2" O.C.(191mm)

9 7/16" O.C.(240mm)

3 7/8" O.C.(98mm)

3 1/4"O.C.(83mm)

2X 1/2" Conduit

3 1/4"O.C.(83mm)

2X 3/4" Conduit

DRMS001125

DRMS001125

BACK VIEW



RELEASED


SUB-2700-00

DRIVER ELECTRICAL DATA

TYPE AC INPUTRANGE

Frequency Hz DIMMING

POWERFACTOR AT FULL LOAD

THD OPER. AMBIENTTEMPERATURE DIMMER TYPE DIMMER RANGE

D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C 0-10V 10-100%

D34ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

D42ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

For use with 0-10 Dimmer: D34 - 34W Dimming Driver (Standard Dimming 1-100%) D42 - 42W Dimming Driver (Standard Dimming 1-100%) D57 - 57W Dimming Driver (Standard Dimming 10-100%) D34ARC - 34W Dimming Driver (Architectural Dimming 0.1-100%) D42ARC - 42W Dimming Driver (Architectural Dimming 0.1-100%)

PM3RM TREE STRAP™

Constant Current Driver PROJECT:

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:


Example PM3RM - TS-20 - D34ARC - BZP - MT - SC - MB

MTPM3RM

REMOTE WIRING




PM3RM - Universal Power Module™ 3 Remote

Finish

Series

Mounting TS - Length - Tree Strap™ (Specify Adjustable Strap Length) Minimum 3” Adjustable Strap (Standard)

Input Voltage

Options

Driver Type (Driver Wattage must match Fixture Wattage)

SC - Safety Cable. For use with Tree Strap™ (TS) mount. Cable length to match strap length. MB - Mounting Brackets

MT - 120-277 VAC Input




RELEASED


SUB-2693-00


Bronze BZP BZW

Black BLP BLW


Aluminum SAP —

Verde — VER









UPM’s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2


Tree InstallationTree Strap™ mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Optional stainless steel safety cable maintains UPM mounting when nylon strap is disengaged.

HousingCopper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws.

Front access for ease of installation and inspection. [2] 3/4” NPT female conduit entries per end cap for through wiring.

Installation TetherStainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.

Patented Knockouts[4] 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W)[1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant.

Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range.



ListingsNEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant.Made in USA.

SPECIFICATIONS

PROJECT:

TYPE:

PM3RM TREE STRAP™


3 1/8"(79mm)

7 7/8"(200mm)

(4) 3/4" (19mm) Patented Knockouts For Use with Surface Conduit (By Others)

3 15/16"(100mm)

Safety Cable withSecure Connection,No Tools Requiredfor Assembly

5 11/16"(144mm) 3" (76mm) Minimum

Specify Length5 5/8"(143mm)

Adjustable Nylon Strap

3 1/8"(79mm)

7 7/8"(200mm)


3 15/16"(100mm)


5 11/16"(144mm) 3" (76mm) Minimum



3 1/8"(79mm)

7 7/8"(200mm)


3 15/16"(100mm)


5 11/16"(144mm) 3" (76mm) Minimum



3 1/8"(79mm)

7 7/8"(200mm)


3 15/16"(100mm)


5 11/16"(144mm) 3" (76mm) Minimum



TOP VIEW SIDE VIEW

END VIEW

SAFETY CABLE


OPTIONAL MOUNTING BRACKET

(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)

O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)

(4) Clearance Holesfor 1/4" (6mm)Fasteners (By Others)

3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)

(4) Clearance Holes for 1/4" (6 mm) Fasteners (By Others)

O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)

(4) Clearance Holesfor 1/4" (6mm) Fasteners(By Others)

3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)


O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)

O.C.(4) Clearance Holes for 1/4" (6mm) Fasteners (by others)O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4"(44mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)

O.C.



RELEASED


SUB-2693-00


TYPE AC INPUTRANGE




D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C 0-10V 10-100%

D34ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

D42ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%


PM3RM SURFACE MOUNT



Example PM3RM - SM - D57 - BZP - MT

MTPM3RM SM

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:

REMOTE WIRING





Finish

Series

Mounting SM - Surface Mount (requires side conduit entry)

Input Voltage






RELEASED


SUB-2694-00


Bronze BZP BZW

Black BLP BLW


Aluminum SAP —

Verde — VER










Surface MountFor use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.

HousingCopper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 3/4” NPT female conduit entries per end cap for through wiring.


Patented Knockouts[4] 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W)[1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant.





SPECIFICATIONS

PROJECT:

TYPE:

PM3RM SURFACE MOUNT


(4) Clearance Holesfor 1/4" (6mm) Fasteners (By Others)

8 3/4"(222mm)

9 3/8"(238mm)

7 7/8"(200mm)

O.C.

O.C.

3 3/8"(86mm)2 3/4"

(70mm)

5 5/8"(143mm)

(4) Patented 3/4" (19mm) Knockouts For Use with Surface Conduit (By Others)

3 1/4"(83mm)

With SuppliedMounting Bracket

3 15/16"(100mm)

TOP VIEW


8 3/4"(222mm)

9 3/8"(238mm)

7 7/8"(200mm)

O.C.

O.C.

3 3/8"(86mm)2 3/4"

(70mm)

5 5/8"(143mm)


3 1/4"(83mm)


3 15/16"(100mm)

SIDE VIEW


8 3/4"(222mm)

9 3/8"(238mm)

7 7/8"(200mm)

O.C.

O.C.

3 3/8"(86mm)2 3/4"

(70mm)

5 5/8"(143mm)


3 1/4"(83mm)


3 15/16"(100mm)

END VIEW





RELEASED


SUB-2694-00


TYPE AC INPUTRANGE




D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C 0-10V 10-100%

D34ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

D42ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%


PM3RM JUNCTION BOX (CAMLOCK™)



Example PM3RM - CR - D34 - BZP - MT - MB

MTPM3RM

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:

REMOTE WIRING





Finish

Series

Mounting CR - Round CamLock™

Input Voltage

Options


MB - Mounting Brackets





RELEASED


SUB-2695-00


Bronze BZP BZW

Black BLP BLW


Aluminum SAP —

Verde — VER









PROJECT:

TYPE:

PM3RM JUNCTION BOX (CAMLOCK™)


SPECIFICATIONSGreenSource Initiative™Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.tekaillumination.com/greensource for program requirements.

Round CamLock™ Canopy(Recessed Junction Box)5” diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. [2] tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.



Patented Knockouts[4] 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.Driver (34-57W)[1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant.




ListingsNEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA.

(4) Patented 3/4" (19mm) Knockouts For Use with SurfaceConduit (By Others)

3 1/4"(83mm)

With SuppliedMounting Plate

7 7/8"(200mm)

5 5/8"(143mm)

3 1/2"(89mm)

With SuppliedMounting Canopy

3 15/16"(100mm)


TOP VIEW SIDE VIEW

END VIEW


3 1/4"(83mm)


7 7/8"(200mm)

5 5/8"(143mm)

3 1/2"(89mm)


3 15/16"(100mm)



3 1/4"(83mm)


7 7/8"(200mm)

5 5/8"(143mm)

3 1/2"(89mm)


3 15/16"(100mm)


5" Dia.(127mm)

1/8"(3mm)

ROUND CAMLOCK™ CANOPY




O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)


3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)


O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)


3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)


O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)


2 1/4"(57mm)

9 1/8"(232mm)

1 3/4"(44mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)

O.C.




RELEASED


SUB-2695-00


TYPE AC INPUTRANGE




D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C 0-10V 10-100%

D34ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

D42ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

For use with 0-10 Dimmer: D34 - (2) 34W Dimming Drivers (Standard Dimming 1-100%) D42 - (2) 42W Dimming Drivers (Standard Dimming 1-100%) D57 - (2) 57W Dimming Drivers (Standard Dimming 10-100%) D34ARC - (2) 34W Dimming Drivers (Architectural Dimming 0.1-100%) D42ARC - (2) 42W Dimming Drivers (Architectural Dimming 0.1-100%)

PM3 DUAL RM TREE STRAP™



Example PM3DRM - TS-20 - D42 - BZP - MT - SC

MTPM3DRM

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:

REMOTE WIRING




Finish

Series

Mounting TS - Length - Tree Strap™ (Specify Adjustable Strap Length) Minimum 3” Adjustable Strap (Standard)


Input Voltage

Options

PM3DRM - Universal Power Module™ 3 Dual Remote

SC - Safety Cable. For use with Tree Strap™ (TS) mount. Cable length to match strap length. MB - Mounting Brackets


13 1/4"(336mm)

3 1/8"(79mm)

6 5/8"(168mm)

2"(51mm)

Specify Length 5 11/16"(144mm)

5 5/8"(143mm)

(4) 3/4" (19mm) Knockouts For Use with Surface Conduit (By Others)

Safely Cable with Secure Connection, No Tools Required for Assembly

3" (76mm) Minimum





RELEASED


SUB-2696-00


Bronze BZP BZW

Black BLP BLW


Aluminum SAP —

Verde — VER










Tree InstallationTree Strap™ mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Optional stainless steel safety cable maintains UPM mounting when nylon strap is disengaged.

HousingCopper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws.

Front access for ease of installation and inspection. [2] 3/4” NPT female conduit entries per end cap for through wiring.


Patented Knockouts[4] 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W)[2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant.





SPECIFICATIONS

PROJECT:

TYPE:

PM3 DUAL RM TREE STRAP™


13 1/4"(336mm)

3 1/8"(79mm)

6 5/8"(168mm)

2"(51mm)

Specify Length 5 11/16"(144mm)

5 5/8"(143mm)



3" (76mm) Minimum


13 1/4"(336mm)

3 1/8"(79mm)

6 5/8"(168mm)

2"(51mm)


5 5/8"(143mm)



3" (76mm) Minimum


13 1/4"(336mm)

3 1/8"(79mm)

6 5/8"(168mm)

2"(51mm)


5 5/8"(143mm)



3" (76mm) Minimum


13 1/4"(336mm)

3 1/8"(79mm)

6 5/8"(168mm)

2"(51mm)


5 5/8"(143mm)



3" (76mm) Minimum


SIDE VIEW

SAFETY CABLE

13 1/4"(336mm)

3 1/8"(79mm)

6 5/8"(168mm)

2"(51mm)


5 5/8"(143mm)



3" (76mm) Minimum


TOP VIEW

END VIEW




O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)


3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)


O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)


3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)


O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)


2 1/4"(57mm)

9 1/8"(232mm)

1 3/4"(44mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)

O.C.




RELEASED


SUB-2696-00


PM3 DUAL RM SURFACE MOUNT



Example PM3DRM - SM - D42ARC - BZP - MT

MTPM3DRM SM

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:

REMOTE WIRING





Finish

Series

Mounting SM - Surface Mount (requires side conduit entry)

Input Voltage



(4) Clearance Holes for 1/4" (6mm) Fasteners (By Others)

(4) 3/4" (19mm)Knockouts For Use with Surface Conduit (By Others)

14 1/8"(359mm)

O.C.

O.C.

14 7/8"(378mm)

3 3/8"(86mm)

13 1/4"(336mm)

2 3/4"(70mm)

5 5/8"(143mm)

3 1/4"(83mm)


6 5/8"(168mm)


TYPE AC INPUTRANGE




D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C 0-10V 10-100%

D34ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

D42ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%




RELEASED


SUB-2697-00


Bronze BZP BZW

Black BLP BLW


Aluminum SAP —

Verde — VER










Surface MountFor use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.



Patented Knockouts[4] 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

Driver (34-57W)[2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant.





SPECIFICATIONS

PROJECT:

TYPE:

PM3 DUAL RM SURFACE MOUNT




14 1/8"(359mm)

O.C.

O.C.

14 7/8"(378mm)

3 3/8"(86mm)

13 1/4"(336mm)

2 3/4"(70mm)

5 5/8"(143mm)

3 1/4"(83mm)


6 5/8"(168mm)



14 1/8"(359mm)

O.C.

O.C.

14 7/8"(378mm)

3 3/8"(86mm)

13 1/4"(336mm)

2 3/4"(70mm)

5 5/8"(143mm)

3 1/4"(83mm)


6 5/8"(168mm)



14 1/8"(359mm)

O.C.

O.C.

14 7/8"(378mm)

3 3/8"(86mm)

13 1/4"(336mm)

2 3/4"(70mm)

5 5/8"(143mm)

3 1/4"(83mm)


6 5/8"(168mm)

TOP VIEW SIDE VIEW

END VIEW



14 1/8"(359mm)

O.C.

O.C.

14 7/8"(378mm)

3 3/8"(86mm)

13 1/4"(336mm)

2 3/4"(70mm)

5 5/8"(143mm)

3 1/4"(83mm)


6 5/8"(168mm)





RELEASED


SUB-2697-00


PM3 DUAL RM JUNCTION BOX (CAMLOCK™)PROJECT:


Example PM3DRM - CR - D57 - BZP - MT - MB

PM3DRM

TYPE:

CATALOG NUMBER:

LAMP(S):

NOTES:

REMOTE WIRING




MT

Finish

Series

Mounting CR - Round CamLock™

Input Voltage

Options


MB - Mounting Brackets



13 1/4"(336mm)

5 5/8"(143mm)


3 1/2"(89mm)



3 1/4"(83mm)


6 5/8"(168mm)


TYPE AC INPUTRANGE




D34 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D42 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 1-100%

D57 120/208/240/277 50/60 YES >0.9 ≤20% -30° C ~ 60°C 0-10V 10-100%

D34ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%

D42ARC 120/208/240/277 50/60 YES >0.9 ≤20% -20° C ~ 50°C 0-10V 0.1-100%




RELEASED


SUB-2698-00


Bronze BZP BZW

Black BLP BLW


Aluminum SAP —

Verde — VER









PROJECT:

TYPE:

PM3 DUAL RM JUNCTION BOX (CAMLOCK™)



Round CamLock™ Canopy(Recessed Junction Box)5” diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4” octagonal junction box. [2] tamper-resistant, black oxide stainless steel mounting screws. 1/8” thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.


Installation TetherStainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts[4] 3/4” NPT, machined aluminum knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.

Driver (34-57W)[2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, ≤20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant.





SPECIFICATIONS

13 1/4"(336mm)

5 5/8"(143mm)


3 1/2"(89mm)



3 1/4"(83mm)


6 5/8"(168mm)

13 1/4"(336mm)

5 5/8"(143mm)


3 1/2"(89mm)



3 1/4"(83mm)


6 5/8"(168mm)

13 1/4"(336mm)

5 5/8"(143mm)


3 1/2"(89mm)



3 1/4"(83mm)


6 5/8"(168mm)

TOP VIEW SIDE VIEW

END VIEW

13 1/4"(336mm)

5 5/8"(143mm)


3 1/2"(89mm)



3 1/4"(83mm)


6 5/8"(168mm)

5" Dia.(127mm)

1/8"(3mm)

ROUND CAMLOCK™ CANOPY




O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)


3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)


O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


O.C.

2 1/4"(57mm)

13 7/8”(352mm)

1 3/4"(44mm)


O.C.

2 1/4"(57mm)

9 1/8"(232mm)

1 3/4" (44mm)


3 3/8"(86mm)

9 3/8"(238mm)

O.C.

2 3/4"(70mm)


O.C.

14 7/8"(378mm)

3 3/8"(86mm)

2 3/4"(70mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)


2 1/4"(57mm)

9 1/8"(232mm)

1 3/4"(44mm)


2 1/4"(57mm)

1 3/4"(44mm)

7 7/8"(200mm)

O.C.




RELEASED


SUB-2698-00

Documents

LARGE BEACON STEM MOUNT (LBS) · GP-Green Patina* Bronze BZP BZW AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone NIC-Nickel Plate* Black BLP BLW AQW Antique