Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
LANDING LEG HARDWAREChassis & Trailers: Dry & Reefer Van / Flatbed / Auto
904.696.0010www.BuffersUSA.com
Place your order now: 904.696.0010[ 2 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog
» Trailer Catalog
High-Profile Sand Shoes Fab. Steel / Primer Finish
Buffers Part # Size Gusset Patch Sides Base Add’l notes Fleet Eng. # Holland # Penz # Toca #
1001-1737 7” x 4.5” None – n/a – 1/4” 1/4” Dolly Wheel Foot – n/a – LG2066 05-303 905-700-102
1001-7171 10” x 10” None – n/a – 5/16” 3/16” – n/a – XA-V-796-WS – n/a – – n/a –
1001-1291 10” x 10” Single – n/a – 7 GA. 7 GA. Flared Hole 013-01192 LG0055 05-300 905-700-100AF
1001-2931 10” x 10” Single – n/a – 1/4” 7 GA. 013-01194 50616001 05-320 – n/a –
1001-1292 10” x 10” Single 1/4” 1/4” 7 GA. – n/a – LG0055-0105-330, 05-345
905-700-100A
1001-6495 10” x 10” Double – n/a – 1/4” 1/4” Flared Hole – n/a – – n/a – 05-338 – n/a –
1001-2529 10” x 10” Double 1/4” 1/4” 7 GA. – n/a – – n/a – 05-328 – n/a –
1001-2035 10” x 10” Double 1/4” 1/4” 1/4” – n/a – 50616036 05-318 905-700-123
1001-6231 12” x 10” Single – n/a – 3/16” 3/16” Flared Hole – n/a –5061-6000, LG0050
05-301 – n/a –
1001-7172 12” x 10” Single – n/a – 1/4” 7/32” – n/a – LG0050 – n/a – 905-700-105
1001-7329 12” x 10” Single – n/a – 1/4” 1/4” Flared Hole, For Holland Mark V – n/a – 50616039 – n/a – – n/a –
1001-1851 12” x 10” Double 1/4” 1/4” 1/4” – n/a – 50616012 05-317 905-700-123
1001-2930 12” x 12” Single – n/a – 1/4” 7 GA. Flared Hole 013-01196 – n/a – 05-319 – n/a –
1001-6492 12” x 12” Double – n/a – 3/16” 3/16” Flared Hole – n/a – – n/a – 05-350 – n/a –
1001-6103 12” x 12” Double – n/a – 1/4” 1/4” Flared Hole – n/a – LG0065-03 05-339 – n/a –
1001-1852 12” x 12” Double 1/4” 1/4” 1/4” – n/a – 50616013 05-342 – n/a –
1001-1778 16” x 14” Single – n/a – 3/8” 1/4” Oversized, HD – n/a – 50616004 05-339 – n/a –
1001-1754 21” x 12” Double 1/4” 1/4” 1/4” Oversized, HD – n/a – 50616003 05-348 – n/a –
LANDING LEG HARDWARESand Shoes (Low- & High-Profile)
Buffers Part # Size Gusset Patch Sides Base Add’l notes Fleet Eng. # Holland # K/W # Penz # Toca #
1001-2432 10” x 10” None – n/a – 4 GA. 7 GA. Flared Hole – n/a – 50616008 730163 05-349 905-700-121
1001-1295 10” x 10” None 1/4” 7 GA. 7 GA. 013-00073 – n/a – – n/a – 05-310 905-700-101A
1001-1537 10” x 10” None 1/4” 1/4” 1/4” – n/a – 50616034 – n/a – 05-311 905-700-108
1001-6494 12” x 10” None 3/16” 3/16” 3/16” – n/a – – n/a – – n/a – 05-329 – n/a –
1001-6493 12” x 10” None 1/4” 1/4” 1/4” – n/a – – n/a – – n/a – 05-308 905-700-122
1001-6476 12” x 12” None – n/a – 1/4” 3/16” – n/a – – n/a – – n/a – 05-321 – n/a –
1001-2026 12” x 12” None 1/4” 1/4” 1/4” – n/a –50616009 & 50616035
73055 05-336 – n/a –
1001-7460 18” x 16” None 1/4” 1/4” 1/4” Oversized, HD – n/a – – n/a – – n/a – 05-353 – n/a –
1001-1792 21” x 12” Double – n/a – 1/4” 1/4” Oversized, HD, Miller style – n/a – – n/a – – n/a – 05-351 – n/a –
Low-Profile Sand Shoes Fab. Steel / Primer Finish
1295 10 x 10” Low-Profile
1537 10 x 10” Low-Profile 1292
10 x 10” High-Profile
1291 10 x 10” High-Profile
Place your order now: 904.696.0010 [ 3 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog » Trailer Catalog
LANDING LEG HARDWARESand Shoe Kits (High-Profile)
Sand Shoe Axles & Axle Housings
Buffers Part # Includes Sand Shoe Includes Axle Includes Fastener(s) Add’l notes Holland #
1001-7171-KIT-S-F 1001-7171 1002-6821 Solid Axle 1002-1460-A Split Roll Pins (2 ea.) One roll pin fitted, one taped to axle RK-V-315
1001-7171-KIT-H-F 1001-7171 1002-6862 Hollow Axle 1002-1460-A Split Roll Pins (2 ea.) One roll pin fitted, one taped to axle RK-V-115
1001-7172-KIT-S-F 1001-7172 1002-6821 Solid Axle 1002-1460-A Split Roll Pins (2 ea.) One roll pin fitted, one taped to axle – n/a –
1001-7172-KIT-H-F 1001-7172 1002-6862 Hollow Axle 1002-1460-A Split Roll Pins (2 ea.) One roll pin fitted, one taped to axle RK-V-105
Buffers Part # Axle Description Length Material Kit Includes Locking Hardware: Holland # Penz # Other #
1002-1303-KIT-F HD w/ welded cap 8” 1-1/2” SCH 80 1002-1360-KIT 50616040 06-411Fleet Eng. 13-00244 Toca 905-700-208
1001-6821-KIT Solid 8-1/4” 1-7/8” Solid Steel 1002-1460-A (x2) XA-V-1903-1 – n/a – – n/a –
1002-2775-KIT Solid w/ welded cap 8-3/8” 1-7/8” Solid Steel 1002-1360-KIT – n/a – 06-441 Toca 905-700-210
1002-1407-KIT-F Std. Duty w/ welded cap 8-1/2” 1-1/2” SCH 40 1002-1360-KIT 50616043 06-410Fleet Eng. 13-00232 Toca 905-700-201A
1002-6478-KIT-F Extra HD w/ welded cap 8-1/2” 1-1/2” SCH 160 1002-1460-KIT 50616044 06-425 Toca 905-700-209
1002-1304-KIT Solid 8-13/16” 1-7/8” Solid Steel 1002-1460-KITLG0204-04 (axle) 50616041
06-431 Toca 905-700-200
1002-1305-KIT-F Std. Duty w/ flared end 8-7/8” 1-1/2” SCH 40 1002-1360-KIT – n/a – 06-404Toca 905-700-201 FLRTW-1
1002-2440-KIT-F HD w/ flared end 8-7/8” 1-1/2” SCH 80 1002-1460-KIT 50616042 06-405Fleet Eng. 13-00240 Toca 905-700-201 FLR-1
1002-2896-KIT-F Std. Duty w/ welded cap 15-3/8” 1-1/2” SCH 40 1002-1360-KIT – n/a – 06-420 – n/a –
1002-6479-KIT-F HD w/ welded cap 15-3/8” 1-1/2” SCH 80 1002-1360-KIT – n/a – 06-421 Fleet Eng. 13-00336
1002-1736-KIT Solid, for Dolly Wheel Ft. 15-7/8” 1-7/8” Solid Steel 1002-1360-KIT LG0204-01 (axle) 06-430 – n/a –
1002-6491-KIT Solid 16-1/2” 1-7/8” Solid Steel 1002-1360-KIT LG0204-05 (axle) 06-432 Toca 905-700-203
Buffers Part # Base Plate / Tube Fleet Eng. # Holland # New Life / TrailCo # Penz # Toca #
1002-1294 4-1/2” x 5” / 2-3/8” O.D. 013-00198 50616027 1190043 06-345 905-700-202A
1002-7828 5-1/2” x 5-1/2” / 2-3/8” O.D. – n/a – – n/a – – n/a – – n/a –
High-Profile Sand Shoe Kits
Axle Housings Fab. Steel / Primer Finish
Axle Kits Axles: Fab. Steel / Primer Finish
1294 4-1/2” x 5” Base Plate
1303-KIT-F 1407-KIT-F
1304-KIT 2775-KIT
Place your order now: 904.696.0010 [ 4 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog » Trailer Catalog
LANDING LEG HARDWARE
1003-14061003-1789
1003-1296
1003-1298
Crank Handles & Keepers » Steel w/ primer finish » Ø1-1/4” O.D. » 14 gauge tubing
Buffers Part# Description Fleet Engineers # Holland # Jost # Penz # Toca #
1003-1695 7” Crank Handle, Horizontal – n/a – – n/a – – n/a – 03-207-H – n/a –
1003-1296 9” Crank Handle, Horizontal 013-00427 – n/a – – n/a – 03-211-H – n/a –
1003-6497 12-1/4” Crank Handle, Horizontal 013-00440 50644047 – n/a – 03-212-H – n/a –
1003-1297 15” Crank Handle, Horizontal 013-00429 50644048 – n/a – 03-215-H 905-700-500
1003-1298 21” Crank Handle, Horizontal 013-00430 50644049 – n/a – 03-221-H 905-700-501
1003-1664 7” Crank Handle, Vertical – n/a – – n/a – – n/a – 03-207-V 905-700-501
1003-1764 9” Crank Handle, Vertical – n/a – – n/a – – n/a – 03-209-V – n/a –
1003-1365 11” Crank Handle, Vertical 013-00437 50644050 – n/a – 03-211-V 905-700-510
1003-1366 15” Crank Handle, Vertical 013-00439 50644051 – n/a – 03-215-V 905-700-502
1003-1367 21” Crank Handle, Vertical 013-00440 50644052 – n/a – 03-221-V 905-700-503
1003-6857 9-7/8” Crank Handle, Vertical – n/a – XA-V-90-0 C10592.2 – n/a – 905-700-503
1003-6858 12-3/8” Crank Handle, Vertical – n/a – XA-V-90-2 C10592.3 – n/a – – n/a –
1003-6859 15-1/4” Crank Handle, Vertical – n/a – XA-V-90-5 C10592.5 – n/a – 905-700-500
1003-6863 17-3/4” Crank Handle, Vertical – n/a – XA-V-90-10 C10592.4 – n/a – 905-700-501
1003-6430 19-3/4” Crank Handle, Vertical – n/a – XA-V-90-11 – n/a – – n/a – – n/a –
1003-1406 Keeper for Crank Handle – n/a – 750812 – n/a – 03-403 – n/a –
1003-1789 Keeper for Crank Handle, Spring Steel – n/a – XB-LG0085, 50618000 – n/a – 03-400 905-700-550
1003-1367
1003-1366
1003-1365
1003-1297
Place your order now: 904.696.0010[ 5 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog
» Trailer Catalog
LANDING LEG HARDWARECrank Handle Shafts, Shift Shafts & Jack Shafts
1004-1368Crank Handle Shaft Binkley, 1” x 19-1/4”
1004-2631Crank Handle Shift Shaft Axle for Austin Constant Mesh Round Leg
1004-1753-KITShift Shaft Gear Assembly Jost A-400 / 401 / 440 Leg
1004-7213Crank Handle Shift Shaft Axle for Holland Mark V Heavy Duty Landing Leg
Buffers Part# Description Austin # Binkley # Holland # Jost # Kysor/ Westran # Penz #
1004-1368 Shift Shaft, Universal Mount, 1" x 19-1/4" – n/a – LG0261-01Series 50000, 51000, 4700
– n/a – – n/a – 03-509
1004-1379 Shaft, 1” x 19-5/8” 6943-2 – n/a – – n/a – – n/a – 750003 03-501
1004-2631 Shift Shaft, 1” x 19-9/16”Constant Mesh, Round
– n/a – 751175 – n/a – 751175 03-512
1004-1383 Shaft, 1” x 15-1/2” 6948-1 – n/a – – n/a – 750002 03-500
1004-1790 Shaft, 1” x 10-5/8” 6943-5 – n/a – – n/a – – n/a – – n/a – 03-502
1004-2427 Shift Shaft, No Gear, 1” x 10” 6956-1 – n/a – – n/a – – n/a – 750004 03-511
1004-1729 Shift Shaft for Holland 150 Leg – n/a – – n/a – XA-06226-A – n/a – – n/a – 03-514
1004-6525 Shift Shaft for Holland 150 Leg – n/a – – n/a – XA-06226-C-402 – n/a – – n/a – 03-517
1004-7213 Shift Shaft Axle for Holland Mark V Leg – n/a – – n/a – XA-V-06625-A – n/a – – n/a – – n/a –
1004-7214 Jack Shaft Axle for Holland Mark V Leg – n/a – – n/a – XA-V-06624-A – n/a – – n/a – – n/a –
1004-1753-KIT Shift Shaft Geared Assembly for Jost Leg – n/a – – n/a – – n/a – B10285 SER – n/a – – n/a –
Place your order now: 904.696.0010 [ 6 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog » Trailer Catalog
LANDING LEG HARDWARE
1005-1478Adjustable Turning Shaft Assembly 53”– 72”
1005-1299Adjustable Turning Shaft Assembly 37”– 56”
1005-1385Turning Shaft 65”, One-piece type
1005-2388Turning Shaft 69”, One-piece type
Buffers Part# Description Fleet Engineers # Holland # Penz # Toca #
1005-1299 Adjustable Turning Shaft Assembly (37”– 56”): 1 Center Tube 1299-A + 2 End Tubes 1299-B
012-00002 50618004 04-536 905-700-343
1005-1478 Adjustable Turning Shaft Assembly (53”– 72”): 1 Center Tube 1478-A + 2 End Tubes 1299-B
012-00003 50618005 04-552 905-700-344
1005-1299-A Center Tube (36”) – 1.5” O.D. x 14 GA, 1.25” I.D. 012-00005 – n/a – 04-536-2 – n/a –
1005-1478-A Center Tube (52”) – 1.5” O.D. x 14 GA, 1.25” I.D. 012-00006 – n/a – 04-552-2 – n/a –
1005-1299-B End Tube (12”) – 1.25” O.D. x 14 GA w/ 7/16” x 3/4” slot 012-00011 – n/a – 04-552-1 – n/a –
Buffers Part# Length Fleet Engineers # Holland # Jost # Penz # Toca #
1005-6499 42-1/2” (1-1/4” O.D. x 14 GA) – n/a – – n/a – – n/a – 04-652-42 – n/a –
1005-7607 55-7/8” (1” SCH 40 / Heavy Duty) – n/a – – n/a – 10363.55.87 04-653-55 – n/a –
1005-1385 65” (1-1/4” O.D. x 14 GA) – n/a – LG0094-6500 – n/a – 04-652-65 905-700-352
1005-2387 66-3/4” (1-1/4” O.D. x 14 GA) – n/a – 50618046 – n/a – – n/a – – n/a –
1005-2388 69” (1-1/4” O.D. x 14 GA) 012-00008 LG0094-6900 – n/a – 04-652-69 905-700-353
1005-7725 69” (1” SCH 40 / Heavy Duty) – n/a – – n/a – – n/a – 04-653-69 – n/a –
Turning Shafts & Assemblies
Adjustable Turning Shaft Assemblies & Components
One-piece Turning Shafts
Place your order now: 904.696.0010[ 7 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog
» Trailer Catalog
LANDING LEG HARDWAREAdjustable Braces
Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca #
1006-1308 22”– 30” 1-3/4” O.D. x 15 GA 1-1/2” O.D. x 14 GA – n/a – – n/a – 04-10-22-30 – n/a –
1006-1309 26”– 41” 1-3/4” O.D. x 15 GA 1-1/2” O.D. x 14 GA 013-01601 50618006 04-10-26-41 905-700-301
1006-1310 42”– 57” 1-3/4” O.D. x 15 GA 1-1/2” O.D. x 14 GA 013-01602 50618007 04-10-42-57 905-700-303
1006-1311 56”– 72” 1-3/4” O.D. x 15 GA 1-1/2” O.D. x 14 GA 013-01603 50618008 04-10-56-72 905-700-302
1006-1312 72”– 88” 1-3/4” O.D. x 15 GA 1-1/2” O.D. x 14 GA 013-01655 – n/a – 04-10-72-78 – n/a –
Buffers Part# Length Center Tube End Tubes (2) Fleet Eng. # Holland # Penz # Toca #
1006-1527 20”– 24” SCH 40 Pipe 2” O.D. x 7 GA – n/a – – n/a – 04-80-20-24 – n/a –
1006-1528 25”– 34” SCH 40 Pipe 2” O.D. x 7 GA – n/a – – n/a – 04-80-25-34 – n/a –
1006-1529 26”– 41” SCH 40 Pipe 2” O.D. x 7 GA – n/a – 50618009 04-80-26-41 905-700-300
1006-2470 26”– 41” SCH 40 Pipe2” O.D. x 7 GA w/ chamfered ends – n/a – 50618009 04-80-26-41 905-700-300
1006-1530 35”– 54” SCH 40 Pipe 2” O.D. x 7 GA – n/a – 50618010 04-80-35-54 905-700-350
1006-1531 56”– 72” SCH 40 Pipe 2” O.D. x 7 GA – n/a – 50618011 04-80-56-72 905-700-305
Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca #
1006-1613 26”– 41” 1-7/8” O.D. x 13 GA 1-5/8” O.D. x 13 GA – n/a – 50618012 04-15-26-41 – n/a –
1006-1614 42”– 57” 1-7/8” O.D. x 13 GA 1-5/8” O.D. x 13 GA – n/a – 50618013 04-15-42-57 – n/a –
1006-1615 56”– 72” 1-7/8” O.D. x 13 GA 1-5/8” O.D. x 13 GA – n/a – 50618014 04-15-56-72 – n/a –
Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca #
1006-1766 26”– 41” 2” O.D. x 10 GA 1-5/8” O.D. x 11 GA 013-00991 – n/a – 04-40-26-41 – n/a –
1006-1767 42”– 57” 2” O.D. x 10 GA 1-5/8” O.D. x 11 GA 013-00992 – n/a – 04-40-42-57 – n/a –
1006-1768 56”– 72” 2” O.D. x 10 GA 1-5/8” O.D. x 11 GA 013-00993 – n/a – 04-40-56-72 – n/a –
Standard Duty
Extra Heavy Dutyfor SeaLand
Medium Duty
Heavy Duty
End Tube: Ø 21/32” / 16.5 MM Hole, Reinforced End
End Tubes: Ø 21/32” / 16.5 MM Hole, Reinforced Ends
End Tube: Ø 21/32” / 16.5 MM Hole, Reinforced End
End Tube: Ø 21/32” / 16.5 MM Hole, Reinforced End
1310 42 – 57”
1767 42 – 57”
2470 26 – 41”
1531 56 – 72”
1768 56– 72”
1615 56– 72”
1312 72 – 88”
1614 42 – 57”
1527 20 – 24”
1766 26 – 41”
1613 26 – 41”
1308 22 – 30”
Place your order now: 904.696.0010 [ 8 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog » Trailer Catalog
LANDING LEG HARDWAREFixed Braces
Buffers Part# Length (CL-CL) Dimensions Finish Trailmobile # Wabash #
1006-7601 22-1/2” L-Channel 24-1/2” x 1-13/16” x 1-13/16”
Black – n/a – 13S00542
1006-6533 25-5/16” L-Channel w/ 2 chamfered corners
27-1/16” x 2” x 1-1/2” HDG 6004-8-100L – n/a –
1006-6532 31-1/2” L-Channel w/ 2 chamfered corners
33-1/4” x 2” x 1-1/2” HDG 6004-8-100A – n/a –
Buffers Part# Length (CL-CL) Dimensions Finish Wabash #
1006-7602 60” C-Channel 62-1/2” x 2-5/8” x 1-13/16” Black Weldable Primer 13S00544
Buffers Part# Length (CL-CL) Tube Specs Holland # Penz #
1006-1966 21” 1-7/8” O.D. x 13 GA LG0646-2100-P – n/a –
1006-1967 24” 1-7/8” O.D. x 13 GA LG0646-2400-P 04-30-24
1006-1968 27” 1-7/8” O.D. x 13 GA LG0646-2700-P – n/a –
1006-1969 32-7/8” 1-7/8” O.D. x 13 GA LG0646-3288-P – n/a –
1006-1970 42-1/4” 1-7/8” O.D. x 13 GA LG0646-4225-P – n/a –
1006-1960 42-1/2” 1-7/8” O.D. x 13 GA LG0646-4250-P – n/a –
1006-1971 48-1/4” 1-7/8” O.D. x 13 GA LG0646-4825-P – n/a –
1006-1961 48-1/2” 1-7/8” O.D. x 13 GA LG0646-4850-P – n/a –
1006-1972 55-3/16” 1-7/8” O.D. x 13 GA LG0646-5518-P – n/a –
1006-1996 60-1/4” 1-7/8” O.D. x 13 GA LG0646-6025-P – n/a –
Buffers Part# Length (CL-CL) Tube Specs Holland # Penz #
1006-1973 24” 2” O.D. x 7 GA, chamfered ends LG0091-2400 04-30-24
1006-6496 40” 1.9” O.D., x 7 GA, SCH 80 pipe, primer LG0091-4000 04-20-40
Angled Braces 3/16”-thick Steel
Cross Brace3/16”-thick Steel
Medium Duty w/ Chamfered Ends
Heavy Duty w/ Chamfered Ends
Ø 5/8” / 16 MM drilled holes
Ø 11/16” / 17.5 MM drilled holes
Ø 3/4” / 19 MM Holes
Ø 21/32” / 16.5 MM Holes, Reinforced End
Ø 21/32” / 16.5 MM Holes, Reinforced End
1973 24”
1967 24”
Place your order now: 904.696.0010[ 9 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog
» Trailer Catalog
LANDING LEG HARDWAREK-Braces & Skirts/Supports (Wing-Type)
Buffers Part# Width Holland # Wabash #
1006-7600 65” Universal 50618015 13000065
1006-7599 71” Universal – n/a – 13000042
Buffers Part# Width Great Dane # Penz #
1006-2317-US-KIT 64-1/8”, U.S.-made 31721 02-500-102
1006-2318 70-1/8” 31720 02-500-096
Buffers Part# Width Holland # Penz # Trailmobile #
1006-2015 63-5/8” – n/a – 02-501-96 – n/a –
1006-2016 69-5/8” 50618015 02-501-102 4-A8-9-1
K-Braces w/o BracketsFab. Steel / Primer Finish
K-Braces w/ Wing Brackets3/16” Fab. Steel / Primer Finish
K-Braces w/ End BracketsFab. Steel / Primer Finish
Wing-Type Skirts & Supports (listed in alpha order by OEM)
Buffers Part# OEM Item / Material / Finish Dimensions Molded Knockouts Cross Reference #
1007-6380-CS 1007-6380-RS
Cheetah 76232-CS / 76231-RS
Wing Skirt 3/16” Fab. Steel / Primer
W 27-5/8” x H 13-1/8” x 2-5/8” side lips
— N/A —New Life 1011237 (CS) / 1011236 (RS) Penz 02-62-XX, Strick AD-14C-0009-01-00 (CS) / AD-14C-0010-01-00 (RS)
1007-2788 Hyundai 20000735
Lower Wing Support 3/16” Fab. Steel / Primer
W 23-5/8” x H 17-17/32” x 2-1/4” side lips 1 large Ø3-21/32” hole — N/A —
6380-CS Cheetah-style2788 Hyundai-style
Place your order now: 904.696.0010 [ 10 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog » Trailer Catalog
Wing-Type Mounting Brackets – listed in alpha order by OEM
LANDING LEG HARDWAREMounting Brackets (Wing-Type)
Buffers Part# OEM Material / Finish Dimensions Mounting Holes Cross Reference #
1007-2666 FruehaufFCF 001671 001
7 GA Fab. Steel / Primer
W 47” x H 9-5/8” x 2” top/side lips
8 ea. Ø21/32”/16.5mm holes & 1 large rounded square hole
Penz 02-55
1007-1779-CS1007-1779-RS
Great Dane 136-46 (CS) 136-46 (RS)
7 GA Fab. Steel / Primer W 48” x H 13” x 1-3/4” top lip
15 ea. Ø5/8”/16mm holes & 1 large pentagonal hole
Holland 50618038 (CS) / 50618037 (RS), Penz 02-07-XX, New Life/TrailCo 1190540 (CS) / 1190541 (RS)
1007-2680-CS1007-2680-RS
Hyundai 20002893 (CS)20000492 (RS)
5/32” Fab. Steel / Primer W 60” x H 24” x 2” side lips
18 ea. Ø11/16”/17.5mm holes & 1 large pentagonal hole
— N/A —
1007-8845-CS1007-8845-RS
Hyundai 20014038 (CS)20037741 (RS)
3/16” Fab. Steel / HDG W 48” x H 24” x 1-3/4” side lips
17 ea. Ø5/8”/16mm holes, 2 ea. Ø5/16”/8mm holes, 1 ea. large hexagonal & triangular holes
— N/A —
1007-1606 Miller700-4-481
7 GA Fab. Steel / Primer
W 48” x H 11-3/4” x 2-1/2” top lip
14 ea. Ø21/32”/16.5mm holes & 1 large hexagonal hole
Holland 50618016, Penz 02-30
1007-2665-CS1007-2665-RS
Monon V09-189B-CS V09-189A-RS
7 GA Fab. Steel / Primer W 48” x H 11-3/8” x 2” top lip
10 ea. Ø11/16”/17.5mm holes & 3 larger holes
Penz 02-41-XX, New Life 700-4-501-R (CS) / -L (RS)
1007-1793-CS1007-1793-RS
Pines PINES PILGB 1314R (CS) PINES PILGB 1314L (RS)
10 GA Fab. Steel / Primer
W 39-1/8” x H 26” x 1-7/8” side lips
11 ea. Ø17/32”/13.5mm holes & 1 large hexagonal hole
Penz 02-35-XX
1007-1781-CS1007-1781-RS
Pines PINES PILGB 1315R (CS) PINES PILGB 1315L (RS)
10 GA Fab. Steel / Primer
W 50-1/2” x H 26” x 1-7/8” top lip
14 ea. Ø17/32”/13.5mm holes & 1 large hexagonal hole
Penz 02-36-XX
1007-6465-CS1007-6465-RS
Pines GB4382R (CS) GB4382L (RS)
1/8” Fab. Steel / Primer
W 50-1/2” x H 23-1/2” x 2” side lips
17 ea. Ø17/32”/13.5mm holes & 1 large hexagonal hole
— N/A —
1007-2668-CS1007-2668-RS
Strick 03691 (CS), 03691 (RS)
7 GA Fab. Steel / Primer
W 48” x H 10-11/16” x 1-1/2” top lip & 2” side lips
10 ea. Ø11/16”/17.5mm holes & 1 large hexagonal hole
Penz 02-59-XX
1007-2669 Strick AA13D-0506-01-00
7 GA Fab. Steel / Primer
W 48” x H 12-21/32” x 2-1/4” top lip & 1-5/8” side lips
12 ea. Ø11/16”/17.5mm holes & 1 large hexagonal hole
Penz 02-60-XX
1007-2667-CS1007-2667-RS
Strick AA14D-0606-01-00 (CS) AA14D-0607-01-00 (RS)
7 GA Fab. Steel / Primer
W 50” x H 10-5/8” x 2-1/8” top lip & 1-1/2” side lips
10 ea. Ø11/16”/17.5mm holes & 1 large hexagonal hole
Penz 02-58-XX
1007-1607-CS1007-1607-RS
Trailmobile 1190544-CS / -RS
7 GA Fab. Steel / Primer
W 50-1/2” x H 11-1/2” x 3-1/2” top lip
14 ea. Ø21/32”/16.5mm holes & 1 large hexagonal hole
Holland 50618034 (CS) / 50618035 (RS), Penz 02-02-XX, New Life 4-A1-224-R (CS) / 4-A1-224-L (RS), Toca 905-700-843 (CS) / 905-700-844 (RS)
1007-1590 Trailmobile 1190545
7 GA Fab. Steel / Primer
W 62-1/2” x H 25-1/2” x 3-1/2” top lip
14 ea. Ø21/32”/16.5mm holes & 1 large hexagonal hole
Holland 50618033, Penz 02-01
1007-2998-CS1007-2998-RS
Utility 03-1103-0-078 (CS) 03-1103-0-077 (RS)
1/8” Fab. Steel / Primer
W 48-1/8” x H 23-3/8” x 1-3/32” top lip & 2-1/4” side lips
8 ea. Ø17/32”/13.5mm holes & 5 larger 4-27/32”/123mm holes
Vanguard UT02-03-1103-0-078 (CS) / UT02-03-1103-0-077 (RS)
1007-1780-CS1007-1780-RS
WabashWAB13S00047 (CS) WAB13S00048 (RS)
7 GA Fab. Steel / Primer
W 48” x H 8-1/2” x 1-7/8” top lip
10 ea. Ø21/32”/16.5mm holes & 3 larger holes
Penz 02-34-XX, New Life 700-4-420-R (CS) / 700-4-420-L (RS)
1007-7598-CS1007-7598-RS
Wabash 13S01022-CS / -RS
3/16” Fab. Steel / Primer
W 48” x H 9-1/4” x 2” top & bottom lips
10 ea. Ø11/16”/17.5mm holes & large rounded square hole
— N/A —
1606 Miller-style 2998-CS/-RS Utility-style 1607-CS/-RS Trailmobile-style
Place your order now: 904.696.0010[ 11 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog
» Trailer Catalog
U-Type Mounting Brackets (Short) – listed in order by width
U-Type Mounting Brackets (Long) – listed in order by length
Buffers Part# Material / Finish Dimensions Mounting Holes Penz #
1007-2999-CS 1/8” Fab. Steel / PrimerUtility #03-1103-0-124
W 8-7/8” x L 12” x 5” flared tri. lip
8 ea. Ø9/16”/14mm holes & 1 large bell-shaped hole 02-71-CS
1007-2999-RS 1/8” Fab. Steel / PrimerUtility #03-1103-0-123
W 8-7/8” x L 12” x 5” flared tri. lip
8 ea. Ø9/16”/14mm holes & 1 large bell-shaped hole 02-71-RS
1007-2640 3/8” Fab. Steel / Primerfor Great Dane Trailers
W 10” x L 10-1/2” x 6-3/4” lip 10 ea. Ø11/16”/17.5mm holes & 1 large pentagonal hole 02-43
1007-2033 3/8” Fab. Steel / Primerfor Loadcraft Chassis
W 10-1/4” x L 13-1/8” x 8-1/4” lip
10 ea. Ø21/32”/16.5mm holes, 1 large Ø3” hole & 2 large Ø3-1/2” holes on sides w/ notched corners 02-09
1007-2646 3/8” Fab. Steel / Primer W 11-3/4” x L 12” x 3-1/2” lip 10 ea. Ø21/32”/16.5mm holes & 1 large Ø5” hole 02-51
1007-14763/8” Fab. Steel / Primerfor ACL Chassis, Holland #50618036, New Life #700-4-457
W 11-3/4” x L 12” x 5” lip 10 ea. Ø21/32”/16.5mm holes & 1 large Ø3” hole 02-03
1007-1477 1/4” Fab. Steel / Primer W 11-3/4” x L 12” x 6” lip 10 ea. Ø21/32”/16.5mm holes 02-04
Buffers Part# Material / Finish Dimensions Mounting Holes
1007-8254 1/4” Fab. Steel / Primerfor Hyundai Chassis
L 23-5/8” x 10-1/2” x 8-13/32” lip
12 ea. Ø21/32”/16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4” side holes
1007-7327 1/4” Fab. Steel / Primerfor Ajax & Hercules Chassis
L 24” x W 10-1/2” x 6-3/4” lip
10 ea. Ø21/32”/16.5mm holes, 1 large pentagonal hole & 2 large Ø4” side holes
1007-8045 1/4” Fab. Steel / Primerfor Cheetah Chassis
L 25-1/16” x W 10-15/32” x 7-7/8” lip
10 ea. Ø11/16”/17.5mm holes, 1 large pentagonal hole & 2 large Ø4” side holes
1007-63791/4” Fab. Steel / Primerfor Cheetah Chassis Holland #50618017, New Life #1310562
L 25-3/4” x W 10-1/2” x 7-7/8” lip
12 ea. Ø21/32”/16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4” side holes
1007-2787 1/4” Fab. Steel / Primerfor Hyundai Chassis, #20000497
L 27” x W 10-15/32” x 6-7/8” lip
10 ea. Ø21/32”/16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4” side holes
LANDING LEG HARDWAREMounting Brackets (U-Type)
7327 Ajax / Hercules style
8254 Hyundai style
8045 Cheetah style
2033 Loadcraft style
2999-CS Utility style
2646
Place your order now: 904.696.0010[ 12 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog
» Trailer Catalog
2642 for Great Dane
16341631
LANDING LEG HARDWAREBrace Lugs
Buffers Part# Material / Finish Dimensions Description Holland # Penz # Other Cross-Ref.
1008-1306 3/8” Steel / Primer 4-1/4”/4-1/4” x 1-5/8”/1-5/8” x 2” 2-hole for Square Leg, 90°+90° 50618018, 50618019 02-14-A
Fleet Engineers 011-00104, Kysor/Westran 730157, Toca 905-700-392, TrailCo T-L-J4890
1008-1307 3/8” Steel / Primer 5-1/8”/5-1/8” x R2-3/4” x 2” 2-hole for Round Leg, Curved 50618020 02-15-AKysor/Westran 730005, Toca 905-700-321, TrailCo T-L-J4154
1008-1361 3/8” Steel / Primer 5-1/2” x R2-3/4” x 2” 1-hole, Curved — N/A — 02-16-A — N/A —
1008-1364 3/8” Steel / Primer 2-5/8” x 2” 1-hole, Short 50618039 02-10-A Fleet Engineers 011-00098
1008-1378 3/8” Steel / Primer 3-1/2” x 4” x 2” 1-hole, T-shape — N/A — 02-38 — N/A —
1008-1381 3/8” Steel / Primer 10” x 2” x 1” 2-hole, 30°+30°, off-center 730052 02-25Fleet Engineers 011-00981, Toca 905-700-323, TrailCo T-L-1011242
1008-1382 3/8” Steel / Primer 10” x 2” x 1” 2-hole, 30°+30° 50618047 02-32 Fleet Engineers 011-00981
1008-1467 3/8” Steel / Primer 9-1/4” x 2” 2-hole, Straight 730624 02-37 Toca 905-700-324
1008-1473 3/8” Steel / Primer 6-7/8” x 2-3/4” x 2” 2-hole, L-shape, 90° 50618021 02-11-A Trailmobile 01-700-4-407
1008-1630 3/8” Steel / Primer 8-13/32” x 2” 2-hole, Straight 50618022 02-12-A — N/A —
1008-1631 3/8” Steel / Primer 2-3/4” x 2-3/4” x 2” 1-hole, L-shape, 90° 50618023 02-13-AFleet Engineers 011-00100, Toca 905-700-322, TrailCo T-L-1011244
1008-1634 3/8” Steel / Primer 3-1/4” x 2-1/4” x 2” 2-hole, L-shape, 90° 50618024 02-39 Toca 905-700-325
1008-1757 3/8” Steel / Primer 9-1/2” x 2” 3-hole, Straight 50618025 02-40 — N/A —
1008-1788 3/8” Steel / Primer 4-7/8”/4-7/8” x 2”/2” x 2” 2-hole, 90+90° — N/A — 02-21-A Toca 905-700-320, TrailCo T-L-1190554
1008-2007 3/8” Steel / Primer 7-5/8” x 2” 2-hole, Straight 50618026 02-22-A Trailmobile 01-700-4-408
1008-2034 3/8” Steel / Primer 9-3/4” x 2” x 1” 2-hole, Universal 730051 02-20 Trailmobile KW-8910-1
1008-2101 3/8” Steel / Primer 5-1/8”/5-1/8” x 2-1/4”/2-1/4” x 2” 2-hole, 90°+90°, Universal — N/A — 02-24-A Cheetah
1008-2641 3/8” Steel / Primer 8” x 3” 1-hole Rectangle 50618041 02-44 Great Dane 09954Trailmobile 01-700-4-451
1008-2642 3/8” Steel / Primer 9-1/2” x 3” 1-hole Quadrilateral 50618042 02-45 Great Dane 09955Trailmobile 01-700-4-452
1008-2643 3/8” Steel / Primer 13” x 4-1/2” 2-hole Trapezoid 50618043 02-46 Great Dane 09758, 43960005,Trailmobile 01-700-4-450
1008-2644 3/8” Steel / Primer 10-1/16” x 2” x 1” 2-hole, 30°+30° — N/A — 02-47 Austin 8910-5
1008-2645 1/4” Steel / Primer 3-3/8” x 1-7/8” x 2” 1-hole, L-shape, 90° — N/A — 02-50 — N/A —
1008-2647 5/16” Steel / Primer 3” x 2” x 2” 1-hole, L-shape, 90°, beveled ends — N/A — 02-56 Kysor/Westran
1008-2648 3/8” Steel / Primer 10-1/4” x 2” 2-hole, Flat 50618027 02-57 Kysor/Westran, Jost C10262
1008-2765 3/8” Steel / Primer 4-3/8”/4-3/8” x R2” x 2” 2-Hole for Round Leg (Curved) — N/A — — N/A — — N/A —
1008-2774 3/8” Steel / Primer 9-1/4” x 2” x 1” 2-Hole, Universal — N/A — 02-25/MOD — N/A —
1008-2967 3/8” Steel / Primer 5-1/4”/5-1/4” x 2-1/2”/2-1/2” x 2”2-Hole for Jost A400/A401 Square Leg
— N/A — 02-66 Jost C10108, Toca 905-700-308
1008-2974 7/16” Steel / Primer 10” x 2” 2-Hole, Straight 50618028 — N/A — — N/A —
1008-2986 3/8” Steel 4-3/8”/4-3/8” x 1-7/8”/1-7/8” x 2” 2-Hole for Square Leg XA-V-1938 — N/A — TrailCo T-L-XA-V-1938
1008-6338 3/8” Steel / Primer 5-5/16”/5-5/16” x R2-1/2” x 2” 2-Hole for Round Leg (Curved) 730005, BL-4 02-42
Austin J-4154, Fleet Engineers 012-00545, Kysor/Westran J-4154
1008-7124 3/8” Steel / Primer 4-5/16”/4-5/16” x 1-1/2”/1-1/2” x 2” 2-Hole, 75°+75° LG0266 — N/A — — N/A —
1008-7332 1/4” Steel / Primer 3-1/8” x 2-3/16” x 2” 1-Hole, Curved — N/A — 02-16-B — N/A —
1008-7333 1/4” Steel / Primer 4-7/8”/4-7/8” x 2”/2” x 2” 2-Hole, 90°+90° — N/A — 02-21-B — N/A —
1008-7334 3/8” Steel / Primer 6” x 4” x 4” V-shape, Universal — N/A — 02-23-A — N/A —
1306 for Square Leg
Place your order now: 904.696.0010 [ 13 ]
Don’t see what you need? View all products, technical drawings & special order items: » Chassis Catalog » Trailer Catalog
Buffers Part # Material / Finish Dimensions Description Fits
1008-2015-A 3/16” Steel / Red Primer 9-1/4” x 4” x 2” Upper L-Bracket, 4 holes Buffers 1006-2015, 1006-2016 & Penz 02-501-096, 02-501-102
1008-2015-B 3/16” Steel / Red Primer 9-3/8” x 4-3/4” x 2” Lower C-Bracket, 4 holes Buffers 1006-2015, 1006-2016 & Penz 02-501-096, 02-501-102
K-Brace Brackets
LANDING LEG HARDWAREOther Braces & Brackets
Covers (Landing Leg & Gearbox)
6467 for Jost 1-speed
2758 for Holland 150
2398 for Holland 150
2398 for Austin- Kysor/Westran Lift Pak
2015-B Lower C-Bracket
2015-A Upper L-Bracket
2992 for Holland Mark V
7603 for Wabash
6527 for Holland 4700, 4701, 51000 legs
Buffers Part# Material / Finish Dimensions Description Cross-Ref.
1008-2992 3/16” Steel / Red Primer 3-1/2” x 3-1/2” Brace Lug Plate for Holland Mark V Leg Holland LG1829
1008-7603 1/4” Fab. Steel / Red Primer 7” x 6” Upper Brace Connection, 1-hole Wabash 13S00397
1008-7604 1/4” Fab. Steel / Red Primer 6-1/2” x 4” Lower Brace Connection, 1-hole Wabash 13S00398
1008-7605 3/8” Fab. Steel / Black Primer 9-3/4” x 3” 2-Hole, Rectangle for Square Leg Wabash 13S00018
1008-7606 3/8” Fab. Steel / Black Primer 5-1/2” x 3-1/16” Brace Ear, 1-Hole, Diagonal Wabash 13S00547
Buffers Part# Description Dimensions Cross-Ref.
1009-2398 Square, for Atlas 55 & Holland 150 Legs 4-5/8” x 4-5/8” x 5/8” Holland XA-06218
1009-2399 Round, for Austin-Kysor/Westran Lift Pak R5-1/8” x 1/2” Kysor/Westran 751568
1009-6466 Square, for all 2-speed Jost Gearbox Legs 5-1/2” x 5-1/2” x 1-1/16” Jost C10217
1008-6467 Square, for all 1-speed Jost Slave Legs 5-1/2” x 5-1/2” x 5/8” Jost C10259
Buffers Part# Material / Finish Dimensions Description Cross-Ref.
1009-2758 Fab. Steel / Primer 3-1/2” x 3-1/2” 2 Holes, for Holland 150 Leg Holland XA-06224-A
1009-6527 Fab. Steel / Self-color 7” x 6” 3 Holes, for Holland 4700, 4701 & 51000 Legs Holland XB-LG 0663
Other Braces
Landing Leg Covers (Fab. Steel w/ Primer finish)
Gearbox Covers
6466 for Jost 2-speed
VA
Detroit
Jacksonville
Houston
Los Angeles
Providing the Industry with Quality Products for Over 30 Years
Bu�ers USA is Known for:Quality Parts
Competitive PricingHigh Fill Rates
National Distribution Network
Jacksonville, FL • Houston, TX • Detroit, MI • Los Angeles, CA904-696-0010 • Email: sales@bu�ersusa.com • Web: www.bu�ersusa.com
The Nation’s Premier Intermodal Hardware Supplier
Rev. 2020-02-17
www.BuffersUSA.com | 904.696.0010 | [email protected]
Jacksonville, FL • Houston, TX • Detroit, MI • Los Angeles, CA