Lamina General

Pages

• Multi-Mat® Concept

• News

• 1st time user’s guide

• ISO / ASA inserts designation

• Machining guide

• Technical Formulas

• FAQ

• Turning

• Aluminum Turning

• Parting

• Milling

• Aluminum Milling

• Drilling

• Solid Mill

• Material reference list

• Milling Inserts reference table

• Contact list of subsidiaries

�

List of contents

2

3

4

6

8

9

10

11

113

123

133

215

221

227

239

246

248

IMAGINE...Your cutting tools stock reduction

IMAGINE...Having the right tool at the right time all the time

IMAGINE...Your savings of production costs

Focused range of Multi Material inserts

Each insert performs on all materials as good as, or better than the dedicated insert of the competition

Top Swiss quality

ALL YOU NEED IS ONE GRADE...THE LAMINA GRADE

IMAGINE...

Steel StainlessSteel

CastIron

High TempAlloys

Aluminum &Non-Ferrous Alloys

The Lamina Multi-Mat ConceptTM

�

�

The Lamina Multi-Mat® Concept in more applications

New Inserts More Geometries

MILLING Our top quality Milling inserts from Lamina Multi-Mat® LT-30 Grade and tight tolerance Milling bodies.

TURNING Our top quality Turning inserts from Lamina Multi-Mat® LT-10 grade.

PARTING Our revolutionary Parting line is

available for ordering.

Aluminum Our Aluminum line for Milling and Turning applications with LT-05 Grade.

DRILLING Our Drilling line of inserts with

Lamina Multi-Mat® LT-30 Grade.

MULTI-MAT , LAMINA ALTERNATIVETODAY, TOMORROW, ALWAYS !

TM

News & updates

�

First time Lamina user Machining guide

�

As a new user of the revolutionary Lamina Multi-Mat® (Multi Material) inserts, we would like to present to you a short machining guide to insure your satisfaction from our product. The cutting data specified in this guide should be considered as a good starting point. Each insert is able to perform in a wider range of cutting conditions. For complete cutting data please see our catalog or our online catalog at our web site www.lamina-tech.ch

1. Select the material group to be machined. In case of doubt, refer to material reference pages in the catalog. 2. Check machining recommendations with or without coolant. 3. Select feed as a function of the tool lead angle. 4. The cutting speed is indicated in the right-hand column.

Milling

Milling tips • The cutting conditions are Lamina

Technologies guidelines for optimal machining, however our inserts can work in a wider range of cutting conditions to meet special machining needs.

• It is always recommended to machine in ‘ Climb Milling’ way.• For Stainless Steel, work over the minimum speed, as machining Stainless Steel at low speeds causes material sticking.• Coolant recommendations: Use coolant with materials from groups 11, 12. Do not use coolant with materials from groups 1, 2, 3, 4, 7, 9, 10. Use coolant with materials from groups 5, 6, 8 -depending on the application.• Do not use coolant if it is not efficient enough. • In any case of vibrations, we recommend reducing cutting speed and/ or Depth Of Cut, and increasing feed rate. Also always the Cutter’s shank should be as short as possible and as wide as possible. • Always check clamping stability.• If chips are turning with the cutter, increase cutting speed, feed rate or both.• If the work piece warms up, increase feed rate.• Always verify that the tool holder is in good condition (not damaged).

• The above values are indicated as functions of the cutting edge angle, i.e. kappa 45° or 90°. The high feed relates to cutting inserts for surfacing, attack angles 45° and 75°. The low feed relates to cutting inserts for surfacing, trimming angle 90°. The above-mentioned cutting conditions are indicated for each material group and the respective hardness.

�

Basic cutting conditions for first time user - Milling

Nickel Based Alloys

Titanium BasedAlloys

Material Group Group Material Examples BHn Coolantfeed per tooth

o oInitialSFMNo

hardness

45 90

1018 / 1020 150 1000

Low Carbon Steel 1 1026 / 12414 180 0.012 875

210 750

8620 180 750

Alloy Steel 24140 230

0.010700

4340 280 550

320 360

ASTM A353 220 425

High Alloy Steel 3280

0.009350

H13 320 325

350 280

4303 / 304 210

0.010 0.007 700304 L to 250

Austenitic5 316 / 316 L

230

No

0.009 0.006 600Stainless Steel to 270

6316 Ti

0.009 0.005 300630 (F16PH)

Ferritic Stainless7 430 / 439 / 444 No 0.010 0.007 650

Steel

Martensitic8 410 / 420 No

Stainless Steel

Class 20140

750

Grey Cast Iron 9 Class 30to 250

No 0.012 0.009 700

Class 40 600

60-40-18 2100.006

570

Nodular Cast Iron 10 80-55-06 260 Yes 0.010 450

1000-70-03 310 400

Inconel 625 100

11 Inconel 718 -------- Yes 0.009 0.006 100

Hastelloy C 170

12TiAl 6 V4

-------- Yes 0.009 0.006150

T40 140

No

6500.0070.010

Yes

Yes

0.009

0.007

0.006

13

----

----

----

Si < 4%4% < Si < 9%

Si >9%

0.10 0.006

0.007

0.010

0.005

0.006

2400

1350

750

1045

52100

230to 270

200to 300

200to 300

No

Yes

Aluminium

Aluminium 14

Yes

YesFor Alu group 14, please use inserts grade LT-10

For Alu group 13, please use our Alu line grade LT-05

• ThecuttingconditionsareLaminaTechnologiesguidelinesforoptimalmachining,howeverourinsertscanworkinawiderrangeofcuttingconditionstomeetspecialmachiningneeds.

• IfworkingaccordingtoourrecommendedcuttingconditionsA-maxshouldberespected.

• ForStainlessSteel,workovertheminimumspeed,asmachiningStainlessSteelatlowspeedscausesmaterialsticking.

• Coolantrecommendations:

Usecoolantwithmaterialsfromgroups6,7,8,9,10,11,12.

Donotusecoolantwithmaterialsfromgroups1,2,4.Use

coolantwithmaterialsfromgroups3,5-dependingontheapplication.

• Alwaysverifythatthetoolholderandshimareingoodcondi-tion(notdamaged).

• Ifcuttingchipsaretoolong,werecommendincreasingfeedrate.

• Ifcuttingchipsarenotcontrolled(varyinshapeandsize),werecommendincreasingfeedrateandreducingdepthofcut.

• Forinternalboringoperation,thetoolholdershouldbeasshortaspossibleandshankaswideaspossible.

• Inanycaseofvibrations,werecommendreducingcuttingspeed,andincreasingfeedrate.

• Instronginterruptedcut,feedrateshouldbereduced.

�

�. Select the material group to be machined. In case of doubt, consult material reference pages in the catalog.�. Select the insert nose radius. �. Select cutting depth and feed according to radius. �. The cutting speed is indicated in the right-hand column.

Turning

Turning tips

�

Basic cutting conditions for first time user - Turning

Nickel Based Alloys


Material Group Group Material Examples BHnNose radius 1/64” Initial

SFMNohardness

d.o.c(04)

f

Nose radius 2/64”

d.o.c(08)

f

Nose radius 3/64”

d.o.c(12)

f1018 / 1020 150 1300

Low Carbon Steel 1 1026 / 12414 1800.015

to 0.060

975

210 825

8620 180 1000

Alloy Steel 24140 230 800

4340 280 675

320 550

ASTM A353 220 525

High Alloy Steel 3280 400

H13 320 350

350 300

4303 / 304 210

700304 L to 250


230600

Stainless Steel to 270

6316 Ti

350630 (F16PH)

Ferritic Stainless7 430 / 439 / 444 600

Steel

Martensitic8 410 / 420

Stainless Steel

Class 20140

750

Grey Cast Iron 9 Class 30to 250

700

Class 40 625

60-40-18 210 625

Nodular Cast Iron 10 80-55-06 260 550

1000-70-03 310 450

Inconel 625 100

11 Inconel 718 -------- 115

Hastelloy C 200

12TiAl 6 V4

--------165

T40 125

450600

0.004to

0.006

0.015to

0.060

0.004to

0.005

0.008to

0.060

0.003to

0.006

0.008to

0.060

0.004to

0.005

0.009to

0.047

0.004to

0.005

0.015 to 0.060

0.005 to0.006

0.015 to 0.060

0.004 to0.006

0.015 to 0.050

0.005

0.015 to 0.060

0.005 to0.006

Aluminium13

----

----

----

Si < 4%4% < Si < 9%

Si >9%

2400

1350

750

1045

52100

230to 270

200to 300

200to 300

Aluminium

Aluminium 14

0.015to

0.0600.004

0.030to

0.125

0.009to

0.011

0.030to

0.125

0.009to

0.011

0.030to

0.125

0.040to

0.200

0.012to

0.020

0.040to

0.157

0.012to

0.018

0.008to

0.010

0.013to

0.018

0.040to

0.125

0.030to

0.187

0.007to

0.014

0.012to

0.024

0.030to

0.200

0.030to

0.125

0.007to

0.012

0.012to

0.020

0.030to

0.200

0.030to

0.125

0.007to

0.011

0.012to

0.017

0.030to

0.125

0.015 to 0.060

0.005 to0.006

0.030 to 0.125

0.007 to0.012

0.030 to 0.125

0.007 to0.010

0.030 to 0.125

0.030 to 0.125

0.009 to0.011

0.030 to 0.125

0.009 to0.011

0.040 to 0.200

0.012 to0.020

0.040 to 0.157

0.011 to0.018

0.007 to0.010

0.011 to0.018

0.040 to 0.125

0.030 to 0.157

0.012 to0.018

0.030 to 0.157

0.012 to0.018

0.030 to 0.125

0.007 to0.012

0.030 to 0.157

0.012 to0.018

0.008 to 0.200

0.006 to0.020

0.009 to 0.047

0.004 to0.006

0.008 to 0.200

0.005 to0.010

0.020-0.200 0.003-0.009 0.020-0.200 0.007-0.016 0.020-0.200 0.009-0.024

For Alu group 14, please use inserts grade LT-10

For Alu group 13, please use our Alu line grade LT-05

12 04 AF T N

4 3 AF T N

A F45° A A

60° D B

75° E C

85° F D

90° P E

Other angle Z F

3°

5°

7°

15°

20°

25°

G

N

P

Z

30°

0°

11°

Other angle

F

E

T

S

/ Corner configuration

N

L

R

Cutting direction

Edge preparation

METRIC

INCH S E K T

S E K T1 2 3 4

A B C D

H K L

O P R

S T V W

E

75°

86°

35°

85° 55°80°

80°

M

55°

82°

D M S

A ± 0.025 ± 0.005 ± 0.025

C ± 0.025 ± 0.013 ± 0.025

E ± 0.025 ± 0.025 ± 0.025

F ± 0.013 ± 0.005 ± 0.025

G ± 0.025 ± 0.025 ± 0.013

H ± 0.013 ± 0.013 ± 0.025

D M S

J ± 0.05a ± 0.15 ± 0.005 ± 0.025

K ± 0.05a ± 0.15 ± 0.013 ± 0.025

L ± 0.05a ± 0.15 ± 0.025 ± 0.025

M ± 0.05a ± 0.15

± 0.08a ± 0.20 ± 0.130

N ± 0.05a ± 0.15

± 0.08a ± 0.20 ± 0.025

U ± 0.08a ± 0.25

± 0.13a ± 0.38 ± 0.130

ISO / ASA insert designation

�

�

�

12 04 AF T N

4 3 AF T N

A F45° A A

60° D B

75° E C

85° F D

90° P E

Other angle Z F

3°

5°

7°

15°

20°

25°

G

N

P

Z

30°

0°

11°

Other angle

F

E

T

S

/ Corner configuration

N

L

R

Cutting direction

Edge preparation

METRIC

INCH S E K T

S E K T1 2 3 4

A B C D

H K L

O P R

S T V W

E

75°

86°

35°

85° 55°80°

80°

M

55°

82°

D M S

A ± 0.025 ± 0.005 ± 0.025

C ± 0.025 ± 0.013 ± 0.025

E ± 0.025 ± 0.025 ± 0.025

F ± 0.013 ± 0.005 ± 0.025

G ± 0.025 ± 0.025 ± 0.013

H ± 0.013 ± 0.013 ± 0.025

D M S

J ± 0.05a ± 0.15 ± 0.005 ± 0.025

K ± 0.05a ± 0.15 ± 0.013 ± 0.025

L ± 0.05a ± 0.15 ± 0.025 ± 0.025

M ± 0.05a ± 0.15

± 0.08a ± 0.20 ± 0.130

N ± 0.05a ± 0.15

± 0.08a ± 0.20 ± 0.025

U ± 0.08a ± 0.25

± 0.13a ± 0.38 ± 0.130

��

P geometry inserts (CNMP, TNMP, WNMP) are not recommended when machining with interrupted cut.

In order to assist you, our customer, to obtain the best productivity using our cutting tools, we enclose some relevant comments and tips. Each comment is symbolized by an icon and the relevant icons appear for each insert.

We hope that you find these comments and tips helpful.

To increase productivity it is recommended to increase feed (f) and respect cutting speed.

Appropriate for boring operation.

To increase machining productivity, it is recommended to increase speed (Vc) while respecting chip size calculation (Amax).

Wiper inserts will give better surface quality at higher feeds, only whenused on a stable machine with rigid clamping (no vibrations).

It is important to verify and respect Amax (see column 9 in the cutting data tables), which is the maximum chip section . Feed x d.o.c must be lower than the number noted as Amax.

In machining Exotic materials, it is important to verify cutting conditions of the specific insert.

In machining Stainless Steel or Exotic materials, P geometry inserts (CNMP, TNMP, WNMP), are recommended as first choice.

In machining Stainless Steel, please verify and respect the cutting speed recommended for the insert, as there is a tendency to machine at speeds that are too low.

When machining materials from groups 1, 2, 4 it is recommended not to use coolant. When machining material from groups 3, 5 – usingcoolant or not, depends on the application. When machining material from groups 6, 7, 8, 9, 10, 11, 12 it is recommended to use coolant.

Machining Recommendation Guide

�

TURNING MILLING

Technical Formulas

�

SymbolDescriptionUnit

Spindlespeed

Cuttingspeed

Machiningdiameter

Feedperrevolution

Depthofcut

Insertnoseradius

Roughnessavarage

Rootmeansquared

SymbolDescriptionUnit

rpm

sfm

D

fpr

doc

r

Ra

RMS

rev/min

ft/min

inches

inches

inches

inches

uinches

uinches

Spindlespeed

Cuttingspeed

Machiningdiameter

Feedpertooth

feedrate

depthofcut

widthofcut

rpm

sfm

D

fpt

ipm

z

doc

woc

rev/min

ft/min

inches

inches

inches

inches

inches

Actualnumberofteethforcalcula-tionfeedrateoffeedperrevolution.

Cuttingspeed,sfm

surfaceft/min0.262xDxrpm

Cuttingtime

fpr

8xr()Rax1.11

metalremovelrate,

cubicinchesin/min3

SurfacefinishingRMS

uinches

Cuttingspeed,sfm

surfaceft/min

rpmxzxfptfeedrate,ipminches/min

ipm

rpmxz

docxwocxipm

spindlespeed,rpm

rev/min

spindlespeed,rpm

rev/min

0.262xDxrpm

3.82xsfm

D

3.82xsfm

D

loc

fprxrpm

2

/3

docxfprxsfmx12

SurfacefinishingRa**

uinches

feedpertoothfpt

inches

metalremvalrate,

cubicinchesin/min3

�0

Frequently Asked Questions

�0

Is it true that Lamina inserts can be used with any type of working material?Lamina inserts have been tested in countless applica-tions around the world, and are suitable for practically any type of Turning or Milling metal cutting operation. It is noteworthy that, while Lamina inserts will work in Aluminum production jobs in Aluminum frequently require tailored designed chip-control optimization.Please refer to Lamina Alu-Line.

What speeds and feeds should Lamina inserts be run at?In this catalog, specific recommendations are provided for each individual insert, indicating the speeds and feeds that are required for most of the material groups. In order to achieve the maximum advantage from Lamina’s grade technology it is important to always run the inserts according to the recommended conditions. In general, the best results are normally achieved at the high range of the recommended cutting speeds.

What can we expect regarding the quality and consistency of Lamina inserts?Due to Lamina’s unique production methods and Quality Control procedures, you can expect inserts with much higher accuracy and consistency than you have been accustomed up to now: insert to insert, box to box and batch to batch. This advantage improves the unatten-ded operation of your machines.

What percentage of my tooling requirements can Lamina supply?In most regular shops Lamina’s insert program should cover about 80% of all inserts needed for CNC machi-nes from 20 Hp and down. The insert program covers a full range of standard turning and milling operations from Semi-Roughing to Super-Finishing. Will the performance of Lamina grades be better than the specialized and dedicated grades available from the market?Lamina has extensive know-how in sub-micron powder technology as well as in state of the art PVD coating. This know –how combined with unique chip breaker geometry and the into depth application understanding, enabled Lamina to offer the Multi - Mat Concept; a simple concept of using one insert to work on many materials. The same insert can be used on the next job and the job after and so on, replacing the hundreds of specialized and confusing insert choices that are being used.

In machine shops that run Lamina inserts, what do they find as the biggest benefits?• Time saving- ability to always have the right insert available for any job. This reduces the number of setups and idle time.• Cost saving- 80% reduction in insert inventory, orde-ring and stocking cost.

Are Lamina inserts coated the same as other PVD inserts?Lamina’s state of the art PVD coating has significant differences compared to other suppliers. Our coating process produces thicker and stronger coating – with better adhesion, higher performance and longer tool life.

What about turning tool holders and boring bars?Lamina’s ANSI / ISO standard turning inserts are designed to fit all industrial standard turning tools and boring bars, using the tool holders you have in your stock.

In turning, when should I use the _NMP style inserts rather than the _NMG style inserts?Most customers find that High-Positive _NMP style inserts (CNMP, TNMP and WNMP) deliver the best results in sticky materials, such as 316 Stainless Steel, Inconel, and Titanium (high heat and corrosion resistant properties). This is achieved by our unique combination of our grades and geometry.

How does the 4 corners Alu-line perform in Low Silicon Aluminum?Our Alu-line insert’s geometry is specially designed for Aluminum with low Silicon content, creating chips that break instead of curl. The inserts are also coated and treated to reduce friction achieving unbeatable perfor-mance and tool life.

What is special about your Solid-Mill line?Our know-how of inserts making was applied to our Solid Mills line. Our mills generate less friction and heat and therefore give better cut and longer tool life.

When should I use Star line?Star line inserts are a good cost for positive turning inserts. Our Star Line inserts offer 3 cutting corners for the VBMT, CCMT, DCMT, and TCMT shapes instead of 2. Moreover, all the inserts can be mounted on the same tool holder.

Turning LT - 10 Multi-Mat TurningLT - 05 Aluminium

MULTI-MAT TURNING INSERTS®

®

��

CCMT

CNMA

CNMG

CNMM

CNMP

DCMT

DNMG

KNUX

RCMT

SCMT

SNMG

TCMT

TNMG

TNMP

TNUX

TPMR

VBMT

VCMT

VNMG

WNMG

WNMP

STAR

ALU- TurningParting

NN All Purpose Chipbreaker

1 Not Recommended 2 Acceptable 3 Recommended 4 Excellent

Turning

Insert designation Grade l s r Catalog Nr. Page

Application Guide Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut

Machining Recommendation Guide - Please see Pg. 8

Machining conditions Turning



Turning



C C M T

Insert Designation Grade l s r Catalog Nr. Page*

CCMT 2(1.5)1 NN

CCMT 3(2.5)1 NN

CCMT 3(2.5)2 NN

CCMT 3(2.5)2 WM

CCMT 431 NN

CCMT 432 NN

CCMT 433 NN

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

T0000055

T0000056

T0000117

T0000057

T0001456

T0001457

T0001776

13

14

15

16

17

18

19

1/4" 3/32" 1/64"

3/8" 5/32" 1/64"

3/8" 5/32" 1/32"

3/8" 5/32" 1/32"

1/2" 3/16" 1/64"

1/2" 3/16" 1/32"

1/2" 3/16" 3/64"

Shape Clearance Angle Tolerance Insert Type80° Diamond 7° Positive

rakeScrew Down ClampingSingle Sided

d ± 0.05 m ± 0.08s ± 0.13

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��

80° Diamond shape inserts, with positive chip breaker geometry. Very popular and useful for Boring even of small diameters, Facing and external turning operations.

CCMT 3(2.5)1 NN

CCMT 3(2.5)1 NN

CCMT 3(2.5)2 NN

CCMT 3(2.5)2 WM

CCMT 431 NN

CCMT 432 NN

CCMT 433 NN



Turning






Turning



Insert designation Super Finishing Finishing Semi Finishing Roughing Interrrupted Cut

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CCMT 3(2.5)1 NN

Screw Down ClampingSingle Sided

CCMT 3(2.5)1 NN

��

CCMT

150 0.079 0.008 0.01 1,082

1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007

210 0.079 0.006 0.01 820

180 0.079 0.007 0.01 918

2230

0.0040.079 0.007 0.01

394820

0.039 0.006280 0.059 0.006 0.01 689

320 0.059 0.006 0.01 590

220 0.079 0.006 0.01 623

3

2800.004

0.059 0.006 0.01230

4920.039 0.005

320 0.059 0.005 0.01 426

350 0.059 0.005 0.01 328

0.052 0.004 0.00 295

0.046 0.004 0.00 262

0.040 0.003 0.00 230

0.003

0.004

0.003

0.004 131 0.028 0.003

98 0.024 0.003

164 0.033 0.004

0.002

0.003

4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250

5230

0.004 0.071

0.003

0.006 0.01 525 689 0.039 0.005to 270

6 ------- 0.059

0.003

0.005 0.01 230 492 0.039 0.005

7 Annealed 0.004 0.079

0.003

0.006 0.01 558 820 0.039 0.006

8 0.004 0.079

0.003

0.006 0.01558 820

0.039 0.006Treated 394 623

140 0.01 820

9to 230

0.004 0.079

0.003

0.007 0.01 558 754 0.039 0.007

0.01 689

210 0.01 754

10260 0.004 0.079

0.002

0.006 0.01 394 623 0.039 0.006

310 0.01 492

Annealed

0.002

0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002

0.01 115

-------- 0.004 0.059 0.003 0.006 0.0182

131 0.039 0.005

0.01 213

-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006

0.01 92 131 0.005

131

92

0.0390.005

Material Group Material A max Optimal cutting

No Examples*min max min max min max d.o.c feed

conditions

400

480

550

450

Group Brinell hardness

Low CarbonSteel

Alloy Steel

HighAlloy Steel

AusteniticStainless Steel

FerriticStainless Steel

MartensiticStainless Steel

Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140

X40 CrMoV 5 1H 1340 NiCrMo 64340S 2-10-1-8HSS M42

X5 CrNi 18 9304

X2 CrNiMo 17 2 2316

X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic

X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42

d.o.c [Inch] Feed [inch/rev] Speed [SFM][inch 2]

11

12

Machining conditions TurningMachining conditionsTurning


1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning CCMT 3(2.5)1 NN

CCMT 3(2.5)1 NN

��

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12

Machining conditions TurningMachining conditionsTurning Machining conditions Turning


Machining conditionsTurning

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CCMT 3(2.5)2 NNCCMT 3(2.5)1 NN

CCMT 3(2.5)2 NN

��

CCMT

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning CCMT 3(2.5)2 WM

CCMT 3(2.5)2 WM

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CCMT 431 NN

CCMT 431 NNCCMT 3(2.5)2 WM

��

CCMT

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


CCMT 432 NN

CCMT 432 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CCMT 433 NNCCMT 432 NN

CCMT 433 NN

��

CCMT

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning




CNMA 434 NN LT 10 T0000612 211/2" 3/16" 1/16"

C N M A

Insert Designation

CNMA 434 NN

Shape Clearance Angle Tolerance Insert Type80° Diamond 0° No rake Cylindrical hole,

No Chip breaker.d ± 0.05 m ± 0.08s ± 0.13

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

�0

80° Diamond shape flat insert. Strong edge preparation mainly for Gray Cast Iron machining. For general purpose Turning, Facing and Boring operations.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CNMA 434 NN

CNMA 434 NN

Cylindrical hole,No Chip breaker.

��

CNMA

150

1 180

210

180

2230

280

320

220

3

280

320

350

4 210to 250

5230

to 270

6 -------

7 Annealed

8Treated

140 0.118 820

9to 230

0.020 0.197 0.035 0.106 558 754 0.157 0.024

0.106 689

210 0.091 754

10260 0.020 0.197

0.008

0.028 0.079 394 623 0.157 0.020

310 0.071 492

Annealed

0.008

0.020 0.071 0.006 0.010 98 164 0.047 0.0050.002

--------

--------

Material Group Material d.o.c [inch] feed [inch/rev]A max

Vc [SFM] Optimal cutting


conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42

CNMA inserts are not recommended for Low Carbon Steel

CNMA inserts are not recommended for Alloy Steel

CNMA inserts are not recommended for High Alloy Steel

CNMA inserts are not recommended for Exotic materials

CNMA inserts are not recommended for Exotic materials

CNMA inserts are not recommended for Martensitic Stainless Steel

CNMA inserts are not recommended for Ferritic Stainless Steel

CNMA inserts are not recommended for Austenitic Stainless Steel

11

12



Turning







Turning




CNMG 431 NN

CNMG 432 NN

CNMG 432 NR

CNMG 432 NP

CNMG 432 WM

CNMG 433 NN

T0000491

T0000059

T0001436

T0001966

T0000060

T0000061

23

24

25

26

27

28

1/2" 3/16" 1/64"

1/2" 3/16" 1/32"

1/2" 3/16" 1/32"

1/2" 3/16" 1/32"

1/2" 3/16" 1/32"

1/2" 3/16" 3/64"

C N M GShape Clearance Angle Tolerance Insert Type

80° Diamond 0° No rake Pin / Top clamp Double sided

d ± 0.05 m ± 0.08s ± 0.13

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

WM Wiper Medium chip breaker

CNMG 431 NN

CNMG 432 NN

CNMG 432 NR

CNMG 432 NP

CNMG 432 WM

CNMG 433 NN

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��

The most popular general purpose Turning inserts. Use for Turning, Facing and Boring operations.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CNMG 431 NN

Pin / Top clamp Double sided

CNMG 431 NN

��

CNMG150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning CNMG 432 NN

CNMG 432 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CNMG 432 NRCNMG 432 NN

CNMG 432 NR

��

CNMG150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning CNMG 432 NP

CNMG 432 NP

��

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CNMG 432 WMCNMG 432 NP

CNMG 432 WM

��

CNMG150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4



TurningMachining conditionsTurning CNMG 433 NN

CNMG 433 NN

��

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




TurningMachining conditionsTurning




CNMG 433 NN

CNMM 432 NR

CNMM 433 NR

T0000669

T0000671

30

31

1/2" 3/16" 1/32"

1/2" 3/16" 3/64"

LT 10

LT 10

C N M MShape Clearance Angle Tolerance Insert Type


d ± 0.05 m ± 0.08s ± 0.13

CNMM 432 NR

CNMM 433 NR

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��

CNMM

80° Diamond shape, single sided inserts. Strong cutting edge for roughing operations which inclu-des interrupted cut, high feeds and high depth of cut.

NR Roughing chip breaker



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning CNMM 432 NR

CNMM 432 NR

�0

150 0.276 0.024 0.12 1,082

1 180 0.047 0.276 0.024 0.10 590 918 0.197 0.018

210 0.276 0.024 0.09 820

180 0.276 0.020 0.09 918

2230

0.0390.276 0.016 0.08

394820

0.197 0.014280 0.276 0.015 0.06 689

320 0.276 0.013 0.06 590

220 0.276 0.017 0.07 623

3

2800.031

0.276 0.013 0.06230

4920.197 0.014

320 0.197 0.012 0.05 426

350 0.197 0.011 0.04 328

0.157 0.009 0.04 295

0.139 0.008 0.03 262

0.118 0.007 0.02 230

0.012

0.010

0.010

0.031 131 0.098 0.007

98 0.079 0.006

164 0.118 0.008

0.006

0.011

4 210 0.276 0.017 0.07 558 886 0.197 0.013to 250

5230

0.039 0.197

0.010

0.015 0.06 525 689 0.197 0.011to 270

6 ------- 0.197

0.009

0.014 0.06 230 492 0.197 0.010

7 Annealed 0.039 0.276

0.008

0.017 0.07 558 820 0.197 0.013

8 0.039 0.276

0.009

0.017 0.07558 820

0.197 0.013Treated 394 623

140 0.11 820

9to 230

0.039 0.276

0.009

0.024 0.10 558 754 0.197 0.016

0.09 689

210 0.10 754

10260 0.031 0.276

0.009

0.020 0.09 394 623 0.197 0.015

310 0.09 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.05 115

-------- 0.031 0.197 0.010 0.015 0.0582

131 0.118 0.013

0.06 213

-------- 0.031 0.197 0.0090.015 0.06 115 197 0.118 0.013

0.04 92 131 0.012

131

92

0.1180.013



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CNMM 433 NRCNMM 432 NR

CNMM 433 NR

��

CNMM

150 0.276 0.031 0.14 1,082

1 180 0.059 0.276 0.031 0.13 590 918 0.197 0.024

210 0.276 0.031 0.11 820

180 0.276 0.028 0.12 918

2230

0.0470.276 0.026 0.10

394820

0.197 0.017280 0.276 0.022 0.09 689

320 0.276 0.020 0.08 590

220 0.276 0.024 0.10 623

3

2800.039

0.276 0.020 0.09230

4920.157 0.014

320 0.197 0.016 0.08 426

350 0.197 0.014 0.07 328

0.157 0.013 0.06 295

0.139 0.012 0.05 262

0.118 0.010 0.04 230

0.014

0.012

0.011

0.039 131 0.117 0.011

98 0.100 0.009

164 0.138 0.011

0.007

0.013

4 210 0.276 0.023 0.11 558 886 0.157 0.013to 250

5230

0.059 0.197

0.011

0.020 0.09 525 689 0.157 0.011to 270

6 ------- 0.197

0.010

0.020 0.07 230 492 0.157 0.010

7 Annealed 0.047 0.276

0.010

0.020 0.11 558 820 0.157 0.013

8 0.047 0.276

0.011

0.020 0.11558 820

0.157 0.013Treated 394 623

140 0.15 820

9to 230

0.059 0.276

0.011

0.035 0.14 558 754 0.157 0.016

0.13 689

210 0.14 754

10260 0.047 0.276

0.011

0.030 0.13 394 623 0.157 0.015

310 0.12 492

Annealed

0.009

0.039 0.094 0.009 0.02 98 164 0.047 0.0070.005

0.06 115

-------- 0.047 0.197 0.011 0.018 0.0682

131 0.118 0.013

0.06 213

-------- 0.047 0.197 0.0100.018 0.05 115 197 0.118 0.013

0.04 92 131 0.012

131

92

0.1180.016



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning



CNMP 432 NN

CNMP 433 NN

T0000062

T0000063

33

34

12 4,76 0,8

12 4,76 1,2

C N M PShape Clearance Angle Tolerance Insert Type


d ± 0.05 m ± 0.08s ± 0.13

LT 10

LT 10

CNMP 432 NN

CNMP 433 NN

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��

80° Diamond shape, double sided inserts with positive chip breaker geometry. Generates low cut-ting forces, suitable for High Temperature Alloys.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

CNMP 432 NN


CNMP 432 NN

��

CNMP

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4



TurningMachining conditionsTurning CNMP 433 NN

CNMP 433 NN

��

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

11 -------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

12 -------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42









CNMP 433 NN

LT 10

LT 10

LT 10

D C M TShape Clearance Angle Tolerance Insert Type

55° Diamond 7° Positive rake Screw down clamping

Single sided

d ± 0.05 m ± 0.08s ± 0.13

DCMT 2(1.5)1 NN

DCMT 3(2.5)1 NN

DCMT 3(2.5)2 NN

DCMT 2(1.5)1 NN

DCMT 3(2.5)1 NN

DCMT 3(2.5)2 NN

T0000064

T0000065

T0000721

36

37

38

1/4" 3/32" 1/64"

3/8" 5/32" 1/64"

3/8" 5/32" 1/32"

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��

DCMT

55° Diamond shape inserts, suitable for Internal turning due to a unique chip removal geometry. Generates low cutting forces, most suitable for small work-pieces.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning DCMT 2(1.5)1 NN

DCMT 2(1.5)1 NN

��

150 0.079 0.008 0.01 1,082

1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007

210 0.079 0.006 0.01 820

180 0.079 0.007 0.01 918

2230

0.0040.079 0.007 0.01

394820

0.039 0.006280 0.059 0.006 0.01 689

320 0.059 0.006 0.01 590

220 0.079 0.006 0.01 623

3

2800.004

0.059 0.006 0.01230

4920.039 0.005

320 0.059 0.005 0.01 426

350 0.059 0.005 0.01 328

0.052 0.004 0.00 295

0.046 0.004 0.00 262

0.040 0.003 0.00 230

0.003

0.004

0.003

0.004 131 0.028 0.003

98 0.024 0.003

164 0.033 0.004

0.002

0.003

4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250

5230

0.004 0.071

0.003

0.006 0.01 525 689 0.039 0.005to 270

6 ------- 0.059

0.003

0.005 0.01 230 492 0.039 0.005

7 Annealed 0.004 0.079

0.003

0.006 0.01 558 820 0.039 0.006

8 0.004 0.079

0.003

0.006 0.01558 820

0.039 0.006Treated 394 623

140 0.01 820

9to 230

0.004 0.079

0.003

0.007 0.01 558 754 0.039 0.007

0.01 689

210 0.01 754

10260 0.004 0.079

0.002

0.006 0.01 394 623 0.039 0.006

310 0.01 492

Annealed

0.002

0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002

0.01 115

-------- 0.004 0.059 0.003 0.006 0.0182

131 0.039 0.005

0.01 213

-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006

0.01 92 131 0.005

131

92

0.0390.005



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

DCMT 3(2.5)1 NNDCMT 2(1.5)1 NN

DCMT 3(2.5)1 NN

��

DCMT

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12





1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Turning





Machining conditionsTurning DCMT 3(2.5)2 NN

DCMT 3(2.5)2 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Machining conditionsTurning Turning










DCMT 3(2.5)2 NN

D N M GShape Clearance Angle Tolerance Insert Type


d ± 0.05 m ± 0.08s ± 0.13

DNMG 331 NN

DNMG 332 NN

DNMG 431 NN

DNMG 432 NN

DNMG 433 NN

DNMG 451 NN

DNMG 452 NN

DNMG 453 NN

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

T0000066

T0000675

T0000476

T0000475

T0001021

T0000583

T0000067

T0000672

40

41

42

43

44

45

46

47

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

1/2" 3/16" 1/64"

1/2" 3/16" 1/32"

1/2" 3/16" 3/64"

1/2" 1/4" 1/64"

1/2" 1/4" 1/32"

1/2" 1/4" 3/64"

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

DNMG 331 NN

DNMG 332 NN

DNMG 431 NN

DNMG 432 NN

DNMG 433 NN

DNMG 451 NN

DNMG 452 NN

DNMG 453 NN

��

DNMG

55° Diamond shape inserts. Suitable for roughing complex shapes operations such as Profiling, Copying and Finishing turning operations.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


DNMG �� NN

DNMG 331 NN

�0

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

DNMG �� NN

DNMG 332 NNDNMG 331 NN

��

DNMG

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


DNMG �� NN

DNMG 431 NN

��

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

DNMG �� NN


��

DNMG

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


DNMG �� NN

DNMG 433 NN

��

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

DNMG �� NN


��

DNMG

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


DNMG 452 NN

DNMG 452 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

DNMG 453 NN


��

DNMG

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning



KNUX 160405 R11 T0000951 50 16 4,76 0,5

K N U XShape Clearance Angle Tolerance Insert Type

55° Rectangular 0° No rake Pin / Top clamp Single sided

l ± 0.13 m ± 0.2s ± 0.13

LT 10

KNUX 160405 R11

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��

A 55° nose angle insert with two cutting edges. Popular insert with excellent chip control and low cutting forces, suitable for conventional Turning operations.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

KNUX 160405 R11

KNUX 160405 R11

��

KNUX

150 0.197 0.012 0.03 1,082

1 180 0.008 0.157 0.011 0.03 590 918 0.118 0.006

210 0.157 0.010 0.03 820

180 0.157 0.011 0.03 918

2230

0.0080.157 0.010 0.03

394820

0.118 0.006280 0.118 0.009 0.02 689

320 0.118 0.008 0.02 590

220 0.118 0.009 0.02 623

3

2800.008

0.118 0.008 0.00230

4920.079 0.005

320 0.118 0.007 0.01 426

350 0.118 0.006 0.00 328

0.104 0.005 0.00 295

0.091 0.004 0.00 262

0.080 0.003 0.00 230

0.005

0.003

0.003

0.008 131 0.057 0.004

98 0.048 0.003

164 0.067 0.005

0.002

0.004

4 210 0.157 0.009 0.03 558 886 0.118 0.006to 250

5230

0.008 0.118

0.005

0.008 0.02 525 689 0.079 0.006to 270

6 ------- 0.118

0.004

0.007 0.02 230 492 0.079 0.008

7 Annealed 0.008 0.118

0.003

0.009 0.02 558 820 0.079 0.006

8 0.008 0.118

0.004

0.009 0.02558 820

0.079 0.006Treated 394 623

140 0.03 820

9to 230

0.008 0.197

0.004

0.012 0.03 558 754 0.118 0.006

0.02 689

210 0.03 754

10260 0.008 0.157

0.005

0.010 0.02 394 623 0.098 0.005

310 0.02 492

Annealed

0.004

0.016 0.055 0.006 0.01 98 164 0.039 0.0040.002

0.02 115

-------- 0.008 0.118 0.003 0.009 0.0282

131 0.059 0.005

0.02 213

-------- 0.008 0.118 0.0030.009 0.02 115 197 0.059 0.005

0.02 92 131 0.005

131

92

0.0590.008



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning




R C M TShape Clearance Angle Tolerance Insert TypeRound 7° Positive rake Screw down clamping

Single sidedl ± 0.05 s ± 0.13

RCMT 0602 M0

RCMT 0803 M0

RCMT 10T3 M0

RCMT 1204 M0

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

RCMT 0602 M0

RCMT 0803 M0

RCMT 10T3 M0

RCMT 1204 M0

T0000090

T0000091

T0000092

T0000093

51

52

53

54

06 2,38 3

08 3,18 4

10 3,97 5

12 4,76 6

LT 10

LT 10

LT 10

LT 10

�0

Round inserts with positive rake angle and excellent edge resistance. Suitable for Profiling opera-tions of Mill rolls and Aerospace parts.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

RCMT 0602 M0

RCMT 0602 M0

��

RCMT

150 0.079 0.014 0.03 1,148

1 180 0.020 0.079 0.014 0.03 590 918 0.039 0.014

210 0.059 0.014 0.02 820

180 0.079 0.012 0.02 918

2230

0.0200.079 0.012 0.02

394820

0.039 0.012280 0.079 0.012 0.02 689

320 0.059 0.010 0.01 590

220 0.079 0.012 0.02 623

3

2800.020

0.079 0.012 0.02230

4920.039 0.011

320 0.059 0.012 0.01 426

350 0.059 0.010 0.01 328

0.047 0.009 0.01 295

0.039 0.007 0.00 262

0.031 0.005 0.00 230

0.006

0.005

0.005

0.020 131 0.028 0.006

98 0.024 0.005

164 0.033 0.008

0.003

0.006

4 210 0.079 0.010 0.01 558 886 0.039 0.014to 250

5230

0.020 0.079

0.006

0.007 0.01 394 689 0.039 0.013to 270

6 ------- 0.059

0.005

0.007 0.01 230 394 0.039 0.011

7 Annealed 0.020 0.079

0.005

0.008 0.01 558 820 0.039 0.013

8 0.020 0.079

0.006

0.008 0.01558 820

0.039 0.013Treated 394 689

140 0.03 918

9to 230

0.020 0.079

0.006

0.018 0.03 558 820 0.039 0.014

0.03 754

210 0.02 754

10260 0.020 0.079

0.004

0.014 0.02 394 623 0.039 0.012

310 0.02 492

Annealed

0.004

0.008 0.039 0.004 0.00 98 164 0.024 0.0030.002

0.01 115

-------- 0.020 0.059 0.005 0.007 0.0182

131 0.039 0.011

0.01 213

-------- 0.020 0.059 0.0050.007 0.01 115 197 0.039 0.012

0.01 92 131 0.011

131

92

0.0390.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning RCMT 0803 M0

RCMT 0803 M0

��

150 0.079 0.017 0.03 1,148

1 180 0.020 0.079 0.017 0.03 590 918 0.039 0.014

210 0.059 0.017 0.03 820

180 0.079 0.014 0.03 918

2230

0.0200.079 0.014 0.02

394820

0.039 0.012280 0.079 0.014 0.02 689

320 0.059 0.012 0.02 590

220 0.079 0.014 0.02 623

3

2800.020

0.079 0.014 0.02230

4920.039 0.011

320 0.059 0.014 0.02 426

350 0.059 0.012 0.01 328

0.051 0.010 0.01 295

0.039 0.008 0.01 262

0.033 0.006 0.00 230

0.006

0.005

0.005

0.020 131 0.028 0.007

98 0.023 0.006

164 0.033 0.009

0.003

0.006

4 210 0.079 0.012 0.02 558 886 0.039 0.014to 250

5230

0.020 0.079

0.006

0.008 0.01 394 689 0.039 0.013to 270

6 ------- 0.059

0.005

0.008 0.01 230 394 0.039 0.011

7 Annealed 0.020 0.079

0.005

0.009 0.02 558 820 0.039 0.013

8 0.020 0.079

0.006

0.009 0.02558 820

0.039 0.013Treated 394 689

140 0.04 918

9to 230

0.020 0.079

0.006

0.021 0.04 558 820 0.039 0.014

0.04 754

210 0.03 754

10260 0.020 0.079

0.004

0.017 0.03 394 623 0.039 0.012

310 0.02 492

Annealed

0.004

0.020 0.039 0.008 0.01 98 164 0.028 0.0070.003

0.01 115

-------- 0.020 0.059 0.005 0.008 0.0182

131 0.039 0.011

0.01 213

-------- 0.020 0.059 0.0050.008 0.01 115 197 0.039 0.012

0.01 92 131 0.011

131

92

0.0390.007



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

RCMT 10T3 M0RCMT 0803 M0

RCMT 10T3 M0

��

RCMT

150 0.118 0.020 0.04 1,148

1 180 0.020 0.118 0.020 0.04 590 918 0.039 0.014

210 0.079 0.020 0.04 820

180 0.118 0.018 0.04 918

2230

0.0200.079 0.017 0.03

394820

0.039 0.012280 0.079 0.017 0.03 689

320 0.079 0.014 0.02 590

220 0.079 0.018 0.03 623

3

2800.020

0.079 0.017 0.03230

4920.039 0.011

320 0.059 0.017 0.02 426

350 0.059 0.014 0.02 328

0.047 0.012 0.01 295

0.039 0.010 0.01 262

0.033 0.008 0.01 230

0.008

0.006

0.006

0.020 131 0.030 0.009

98 0.020 0.007

164 0.039 0.011

0.004

0.008

4 210 0.079 0.014 0.02 558 886 0.039 0.014to 250

5230

0.020 0.079

0.007

0.010 0.01 394 689 0.039 0.013to 270

6 ------- 0.059

0.006

0.010 0.01 230 394 0.039 0.011

7 Annealed 0.020 0.079

0.006

0.011 0.02 558 820 0.039 0.013

8 0.020 0.079

0.008

0.011 0.02558 820

0.039 0.013Treated 394 689

140 0.06 918

9to 230

0.020 0.079

0.008

0.025 0.05 558 820 0.039 0.014

0.05 754

210 0.04 754

10260 0.020 0.079

0.005

0.019 0.04 394 623 0.039 0.012

310 0.03 492

Annealed

0.005

0.020 0.039 0.010 0.01 98 164 0.030 0.0090.004

0.01 115

-------- 0.020 0.059 0.006 0.010 0.0182

131 0.039 0.011

0.01 213

-------- 0.020 0.059 0.0060.010 0.01 115 197 0.039 0.012

0.01 92 131 0.011

131

92

0.0390.008



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4




RCMT 1204 M0

RCMT 1204 M0

��

150 0.157 0.028 0.06 1,148

1 180 0.020 0.157 0.028 0.06 590 918 0.079 0.018

210 0.118 0.028 0.06 820

180 0.157 0.024 0.06 918

2230

0.0200.118 0.024 0.05

394820

0.079 0.016280 0.118 0.024 0.04 689

320 0.098 0.020 0.03 590

220 0.118 0.024 0.05 623

3

2800.020

0.118 0.024 0.04230

4920.079 0.015

320 0.079 0.024 0.03 426

350 0.079 0.020 0.02 328

0.067 0.017 0.02 295

0.057 0.014 0.01 262

0.048 0.011 0.01 230

0.009

0.007

0.007

0.020 131 0.057 0.012

98 0.048 0.010

164 0.067 0.014

0.004

0.009

4 210 0.118 0.020 0.03 558 886 0.079 0.014to 250

5230

0.020 0.118

0.008

0.014 0.02 394 689 0.079 0.013to 270

6 ------- 0.079

0.007

0.014 0.02 230 394 0.059 0.011

7 Annealed 0.020 0.118

0.007

0.016 0.03 558 820 0.079 0.013

8 0.020 0.118

0.009

0.016 0.03558 820

0.079 0.013Treated 394 689

140 0.07 918

9to 230

0.020 0.118

0.009

0.035 0.06 558 820 0.079 0.014

0.06 754

210 0.06 754

10260 0.020 0.118

0.006

0.028 0.05 394 623 0.059 0.012

310 0.05 492

Annealed

0.006

0.020 0.047 0.011 0.01 98 164 0.039 0.0080.004

0.02 115

-------- 0.020 0.079 0.007 0.014 0.0282

131 0.059 0.011

0.02 213

-------- 0.020 0.079 0.0070.014 0.02 115 197 0.059 0.012

0.02 92 131 0.011

131

92

0.0590.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12








90°

S C M T

Square 90° 0° No rake Pin / Top clamp Double sided

l ± 0.08 m ± 0.13s ± 0.13

SCMT 3(2.5)1 NN

SCMT 3(2.5)2 NN

SCMT 432 NN

LT 10

LT 10

LT 10

T0001459

T0001458

T0001777

56

57

58

3/8" 5/32" 1/64"

3/8" 5/32" 1/32"

1/2" 3/16" 1/32"

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

SCMT 3(2.5)1 NN

SCMT 3(2.5)2 NN

SCMT 432 NN

Shape Clearance Angle Tolerance Insert Type

RCMT 1204 M0

��

SCMT

Square inserts with a positive rake angle with excellent cutting edge resistance. Suitable for Boring.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning SCMT 3(2.5)1 NN

SCMT 3(2.5)1 NN

��

150 0.118 0.009 0.02 1,082

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.008

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.007280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.006

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.00 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.006to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.006Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.006

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

SCMT 3(2.5)2 NNSCMT 3(2.5)1 NN

SCMT 3(2.5)2 NN

��

SCMT

150 0.236 0.019 0.07 1,082

1 180 0.020 0.197 0.017 0.06 590 918 0.079 0.013

210 0.197 0.014 0.05 820

180 0.197 0.017 0.06 918

2230

0.0200.197 0.017 0.05

394820

0.079 0.013280 0.157 0.015 0.04 689

320 0.157 0.013 0.03 590

220 0.197 0.015 0.05 623

3

2800.020

0.197 0.013 0.04230

4920.079 0.012

320 0.157 0.012 0.03 426

350 0.157 0.012 0.03 328

0.051 0.004 0.00 230

0.043 0.004 0.00 230

0.031 0.003 0.00 164

0.008

0.007

0.007

0.020 131 0.031 0.002

98 0.031 0.002

131 0.031 0.002

0.002

0.008

4 210 0.197 0.015 0.04 558 886 0.079 0.013to 250

5230

0.020 0.157

0.008

0.013 0.03 394 689 0.079 0.011to 270

6 ------- 0.157

0.007

0.012 0.03 230 394 0.079 0.009

7 Annealed 0.020 0.157

0.007

0.015 0.04 558 820 0.079 0.012

8 0.020 0.157

0.009

0.015 0.04558 820

0.079 0.012Treated 394 656

140 0.07 820

9to 230

0.020 0.236

0.009

0.017 0.06 558 754 0.118 0.013

0.05 689

210 0.05 754

10260 0.020 0.197

0.006

0.015 0.05 394 623 0.118 0.012

310 0.04 492

Annealed

0.006

0.020 0.051 0.005 0.01 98 164 0.024 0.0040.002

0.03 115

-------- 0.020 0.138 0.008 0.013 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.138 0.0070.013 0.03 115 197 0.079 0.011

0.03 92 131 0.009

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4



TurningMachining conditionsTurning SCMT 432 NN

SCMT 432 NN

��

150 0.236 0.019 0.07 1,082

1 180 0.020 0.197 0.017 0.06 590 918 0.079 0.013

210 0.197 0.014 0.05 820

180 0.197 0.017 0.06 918

2230

0.0200.197 0.017 0.05

394820

0.079 0.013280 0.157 0.015 0.04 689

320 0.157 0.013 0.03 590

220 0.197 0.015 0.05 623

3

2800.020

0.197 0.013 0.04230

4920.079 0.012

320 0.157 0.012 0.03 426

350 0.157 0.012 0.03 328

0.051 0.004 0.00 230

0.043 0.004 0.00 230

0.031 0.003 0.00 164

0.008

0.007

0.007

0.020 131 0.031 0.002

98 0.031 0.002

131 0.031 0.002

0.002

0.008

4 210 0.197 0.015 0.04 558 886 0.079 0.013to 250

5230

0.020 0.157

0.008

0.013 0.03 394 689 0.079 0.011to 270

6 ------- 0.157

0.007

0.012 0.03 230 394 0.079 0.009

7 Annealed 0.020 0.157

0.007

0.015 0.04 558 820 0.079 0.012

8 0.020 0.157

0.009

0.015 0.04558 820

0.079 0.012Treated 394 656

140 0.07 820

9to 230

0.020 0.236

0.009

0.017 0.06 558 754 0.118 0.013

0.05 689

210 0.05 754

10260 0.020 0.197

0.006

0.015 0.05 394 623 0.118 0.012

310 0.04 492

Annealed

0.006

0.020 0.051 0.005 0.01 98 164 0.024 0.0040.002

0.03 115

-------- 0.020 0.138 0.008 0.013 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.138 0.0070.013 0.03 115 197 0.079 0.011

0.03 92 131 0.009

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12








SCMT 432 NN

90°

S N M G

Square 90° 0° No rake Pin / Top clamp Double sided

l ± 0.08 m ± 0.13s ± 0.13

SNMG 432 NN

SNMG 433 NN

LT 10

LT 10

T0000322

T0000323

60

61

1/2" 3/16" 1/32"

1/2" 3/16" 3/64"

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

SNMG 432 NN

SNMG 433 NN


��

SNMG

Square inserts with strong cutting edge. Suitable for roughing operations.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning SNMG 432 NN

SNMG 432 NN

�0

150 0.197 0.025 0.07 1,148

1 180 0.020 0.197 0.025 0.07 590 984 0.118 0.020

210 0.157 0.022 0.06 820

180 0.197 0.022 0.05 918

2230

0.0200.157 0.022 0.05

394820

0.098 0.017280 0.157 0.020 0.05 689

320 0.138 0.020 0.04 590

220 0.157 0.022 0.05 623

3

2800.020

0.157 0.022 0.05230

4920.079 0.016

320 0.118 0.020 0.03 426

350 0.118 0.020 0.03 328

0.098 0.017 0.02 295

0.079 0.014 0.02 262

0.067 0.011 0.01 230

0.012

0.010

0.010

0.020 131 0.047 0.011

98 0.028 0.010

164 0.059 0.014

0.006

0.012

4 210 0.197 0.022 0.04 558 886 0.083 0.020to 250

5230

0.020 0.157

0.011

0.020 0.03 525 689 0.083 0.018to 270

6 ------- 0.157

0.010

0.020 0.02 230 492 0.069 0.016

7 Annealed 0.020 0.157

0.010

0.020 0.04 558 820 0.083 0.018

8 0.020 0.157

0.012

0.020 0.04558 820

0.083 0.018Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.012

0.034 0.07 558 754 0.083 0.020

0.07 689

210 0.06 754

10260 0.020 0.197

0.008

0.028 0.05 394 623 0.083 0.017

310 0.05 492

Annealed

0.008

0.020 0.067 0.014 0.01 98 164 0.028 0.0100.006

0.03 115

-------- 0.020 0.118 0.011 0.020 0.0382

131 0.055 0.016

0.03 213

-------- 0.020 0.118 0.0100.020 0.03 115 197 0.055 0.017

0.02 92 131 0.016

131

92

0.0550.017



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

SNMG 433 NNSNMG 432 NN

SNMG 433 NN

��

SNMG

150 0.197 0.038 0.12 1,082

1 180 0.020 0.197 0.038 0.12 590 918 0.118 0.028

210 0.197 0.034 0.10 820

180 0.197 0.034 0.10 918

2230

0.0200.197 0.034 0.08

394820

0.098 0.025280 0.197 0.030 0.08 689

320 0.157 0.030 0.07 590

220 0.197 0.034 0.08 623

3

2800.020

0.197 0.034 0.08230

4920.098 0.022

320 0.157 0.030 0.06 426

350 0.157 0.030 0.06 328

0.139 0.025 0.05 295

0.118 0.020 0.04 262

0.098 0.016 0.02 230

0.015

0.013

0.013

0.020 131 0.071 0.017

98 0.068 0.014

164 0.079 0.020

0.008

0.015

4 210 0.197 0.029 0.07 558 886 0.110 0.022to 250

5230

0.020 0.197

0.015

0.026 0.06 525 689 0.110 0.020to 270

6 ------- 0.197

0.013

0.026 0.04 230 492 0.110 0.018

7 Annealed 0.020 0.197

0.013

0.026 0.06 558 820 0.110 0.020

8 0.020 0.197

0.016

0.026 0.06558 820

0.110 0.020Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.016

0.051 0.11 558 754 0.110 0.034

0.11 689

210 0.09 754

10260 0.020 0.197

0.011

0.039 0.08 394 623 0.110 0.028

310 0.07 492

Annealed

0.011

0.020 0.071 0.008 0.01 98 164 0.039 0.0070.003

0.06 115

-------- 0.020 0.197 0.015 0.026 0.0682

131 0.083 0.021

0.06 213

-------- 0.020 0.197 0.0130.026 0.06 115 197 0.083 0.021

0.05 92 131 0.018

131

92

0.0830.022



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning




T C M TShape Clearance Angle Tolerance Insert Type

Triangle 60° 7° Positive rake Pin / Top clamp Single sided

l ± 0.05 m ± 0.08s ± 0.13

TCMT 2(1.5)1 NN

TCMT 2(1.5)2 NN

TCMT 3(2.5)1 NN

TCMT 3(2.5)2 NN

TCMT 3(2.5)3 NN

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TCMT 2(1.5)1 NN

TCMT 2(1.5)2 NN

TCMT 3(2.5)1 NN

TCMT 3(2.5)2 NN

TCMT 3(2.5)3 NN

T0000477

T0000478

T0000479

T0000068

T0001774

63

64

65

66

67

1/4" 3/32" 1/64"

1/4" 3/32" 1/32"

3/8" 5/32" 1/64"

3/8" 5/32" 1/32"

3/8" 5/32" 3/64"

LT 10

LT 10

LT 10

LT 10

LT 10

��

60° Triangle shape inserts, with positive rake angle. Suitable for regular and sever conditions Boring and Internal turning.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TCMT 2(1.5)1 NN

Pin / Top clamp Single sided

TCMT 2(1.5)1 NN

��

TCMT

Parting

150 0.079 0.008 0.01 1,082

1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007

210 0.079 0.006 0.01 820

180 0.079 0.007 0.01 918

2230

0.0040.079 0.007 0.01

394820

0.039 0.006280 0.059 0.006 0.01 689

320 0.059 0.006 0.01 590

220 0.079 0.006 0.01 623

3

2800.004

0.059 0.006 0.01230

4920.039 0.005

320 0.059 0.005 0.01 426

350 0.059 0.005 0.01 328

0.052 0.004 0.00 295

0.046 0.004 0.00 262

0.040 0.003 0.00 230

0.003

0.004

0.003

0.004 131 0.028 0.003

98 0.024 0.003

164 0.033 0.004

0.002

0.003

4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250

5230

0.004 0.071

0.003

0.006 0.01 525 689 0.039 0.005to 270

6 ------- 0.059

0.003

0.005 0.01 230 492 0.039 0.005

7 Annealed 0.004 0.079

0.003

0.006 0.01 558 820 0.039 0.006

8 0.004 0.079

0.003

0.006 0.01558 820

0.039 0.006Treated 394 623

140 0.01 820

9to 230

0.004 0.079

0.003

0.007 0.01 558 754 0.039 0.007

0.01 689

210 0.01 754

10260 0.004 0.079

0.002

0.006 0.01 394 623 0.039 0.006

310 0.01 492

Annealed

0.002

0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002

0.01 115

-------- 0.004 0.059 0.003 0.006 0.0182

131 0.039 0.005

0.01 213

-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006

0.01 92 131 0.005

131

92

0.0390.005



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning TCMT 2(1.5)2 NN

TCMT 2(1.5)2 NN

��

150 0.079 0.018 0.02 1,312

1 180 0.008 0.079 0.016 0.01 590 1,148 0.039 0.009

210 0.079 0.016 0.01 656

180 0.079 0.016 0.01 984

2230

0.0080.079 0.016 0.01

394820

0.039 0.009280 0.059 0.015 0.01 689

320 0.059 0.014 0.01 590

220 0.079 0.016 0.01 623

3

2800.008

0.059 0.015 0.01230

4920.039 0.007

320 0.059 0.014 0.01 426

350 0.059 0.013 0.01 328

0.047 0.011 0.00 295

0.039 0.009 0.00 262

0.031 0.007 0.00 230

0.006

0.005

0.005

0.008 131 0.030 0.006

98 0.020 0.005

164 0.039 0.006

0.003

0.005

4 210 0.079 0.015 0.01 558 886 0.039 0.009to 250

5230

0.008 0.071

0.006

0.014 0.01 394 689 0.039 0.009to 270

6 ------- 0.059

0.005

0.013 0.01 230 394 0.039 0.009

7 Annealed 0.008 0.079

0.005

0.015 0.01 558 820 0.039 0.009

8 0.008 0.079

0.006

0.014 0.01558 820

0.039 0.006Treated 394 689

140 0.02 918

9to 230

0.008 0.079

0.006

0.016 0.02 558 820 0.039 0.009

0.02 754

210 0.01 754

10260 0.008 0.079

0.006

0.016 0.01 394 623 0.039 0.006

310 0.01 492

Annealed

0.006

0.008 0.031 0.007 0.00 98 164 0.035 0.0050.003

0.01 115

-------- 0.008 0.059 0.006 0.013 0.0182

131 0.028 0.009

0.01 213

-------- 0.008 0.059 0.0050.014 0.01 115 197 0.028 0.009

0.01 92 131 0.009

131

92

0.0280.014



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TCMT 3(2.5)1 NNTCMT 2(1.5)2 NN

TCMT 3(2.5)1 NN

��

TCMT

Parting

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Machining conditions TurningMachining conditionsTurning TCMT 3(2.5)2 NN

TCMT 3(2.5)2 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TCMT 3(2.5)3 NNTCMT 3(2.5)2 NN

TCMT 3(2.5)3 NN

��

TCMT

Parting

150 0.197 0.019 0.05 1,148

1 180 0.020 0.157 0.017 0.04 590 918 0.079 0.013

210 0.157 0.015 0.04 820

180 0.157 0.017 0.04 918

2230

0.0200.157 0.017 0.04

394820

0.059 0.012280 0.118 0.015 0.03 689

320 0.118 0.014 0.02 590

220 0.157 0.015 0.04 623

3

2800.020

0.157 0.014 0.03230

4920.059 0.011

320 0.118 0.013 0.02 426

350 0.118 0.013 0.02 328

0.110 0.011 0.02 295

0.087 0.009 0.01 262

0.059 0.008 0.01 230

0.009

0.008

0.008

0.008 131 0.079 0.008

98 0.047 0.006

131 0.094 0.009

0.002

0.009

4 210 0.157 0.015 0.04 558 886 0.059 0.011to 250

5230

0.020 0.118

0.009

0.014 0.03 394 689 0.059 0.010to 270

6 ------- 0.118

0.008

0.013 0.02 230 394 0.059 0.009

7 Annealed 0.020 0.118

0.008

0.015 0.03 558 820 0.059 0.011

8 0.020 0.118

0.009

0.015 0.03558 820

0.059 0.011Treated 394 689

140 0.05 918

9to 230

0.020 0.197

0.009

0.018 0.05 558 820 0.118 0.013

0.04 754

210 0.04 754

10260 0.020 0.157

0.007

0.015 0.04 394 623 0.098 0.011

310 0.04 492

Annealed

0.007

0.008 0.047 0.005 0.00 98 164 0.035 0.0030.002

0.03 115

-------- 0.020 0.118 0.009 0.013 0.0382

131 0.059 0.010

0.03 213

-------- 0.020 0.118 0.0080.013 0.03 115 197 0.059 0.010

0.03 92 131 0.009

131

92

0.0590.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning




T N M GShape Clearance Angle Tolerance Insert Type

Triangle 60° 0° No rake Pin / Top clamp Double sided

d ± 0.05 m ± 0.08s ± 0.13

TNMG 331 NN

TNMG 332 NN

TNMG 333 NN

TNMG 431 NN

TNMG 432 NN

TNMG 433 NN

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

69

70

71

72

73

74

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

3/8" 3/16" 3/64"

1/2" 3/16" 1/64"

1/2" 3/16" 1/32"

1/2" 3/16" 3/64"

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TNMG �� NN

TNMG �� NN

TNMG �� NN

TNMG �� NN

TNMG �� NN

TNMG �� NN

T0000457

T0000069

T0001734

T0001873

T0000113

T0001735

��

60° Triangle shape inserts. Suitable for General purpose Turning and Copying operations.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TNMG 331 NN

TNMG 331 NN

��

TNMG

Parting

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


TNMG 332 NN

TNMG 332 NN

�0

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TNMG 333 NN

TNMG 333 NNTNMG 332 NN

��

TNMG

Parting

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


TNMG 431 NN

TNMG 431 NN

��

150 0.157 0.016 0.05 1,082

1 180 0.020 0.157 0.016 0.05 590 918 0.118 0.010

210 0.157 0.012 0.04 820

180 0.157 0.012 0.04 918

2230

0.0200.157 0.012 0.04

394820

0.098 0.010280 0.157 0.011 0.04 689

320 0.157 0.011 0.05 590

220 0.157 0.012 0.04 623

3

2800.020

0.157 0.012 0.04230

4920.079 0.008

320 0.118 0.011 0.04 426

350 0.118 0.011 0.04 328

0.098 0.009 0.02 295

0.079 0.008 0.01 262

0.059 0.006 0.01 230

0.006

0.006

0.005

0.020 131 0.055 0.006

98 0.047 0.005

164 0.067 0.007

0.003

0.006

4 210 0.157 0.012 0.04 558 886 0.079 0.007to 250

5230

0.020 0.118

0.006

0.010 0.04 525 689 0.079 0.006to 270

6 ------- 0.118

0.006

0.010 0.04 230 492 0.079 0.005

7 Annealed 0.020 0.157

0.006

0.010 0.04 558 820 0.079 0.006

8 0.020 0.157

0.006

0.010 0.04558 820

0.079 0.006Treated 394 623

140 0.07 820

9to 230

0.020 0.157

0.006

0.016 0.06 558 754 0.118 0.007

0.05 689

210 0.06 754

10260 0.020 0.157

0.005

0.014 0.05 394 623 0.079 0.006

310 0.04 492

Annealed

0.005

0.020 0.059 0.006 0.01 98 164 0.024 0.0030.003

0.02 115

-------- 0.020 0.118 0.005 0.010 0.0282

131 0.039 0.005

0.01 213

-------- 0.020 0.118 0.0040.010 0.01 115 197 0.039 0.006

0.01 92 131 0.005

131

92

0.0390.009



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TNMG 432 NN

TNMG 432 NNTNMG 431 NN

��

TNMG

Parting

150 0.276 0.018 0.07 1,148

1 180 0.020 0.276 0.018 0.07 590 984 0.118 0.014

210 0.197 0.016 0.06 820

180 0.276 0.016 0.05 918

2230

0.0200.276 0.016 0.05

394820

0.118 0.012280 0.197 0.014 0.05 689

320 0.157 0.014 0.04 590

220 0.197 0.016 0.05 623

3

2800.020

0.197 0.016 0.05230

4920.098 0.011

320 0.157 0.014 0.03 426

350 0.157 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.276

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.276

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.197 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.197 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4




TNMG 433 NN

TNMG 433 NN

��

150 0.236 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.236 0.024 0.10 918

2230

0.0200.236 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.197 0.021 0.07 590

220 0.236 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.197 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.236

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.236

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12








TNMP 332 NN T0000492 76 3/8" 3/16" 1/32"


LT 10

TNMP 332 NN

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

T N M P


d ± 0.05 m ± 0.08s ± 0.13

TNMG 433 NN

��

TNMP

60° Triangle shape inserts, with positive chip breaker geometry. Generates considerably low cutting forces. Suitable for General purpose, Copying, High Temperature Alloys and Stainless Steel turning operations.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4




TNMP 332 NN

TNMP 332 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12









T N U XShape Clearance Angle Tolerance Insert Type


l ± 0.13 m ± 0.2s ± 0.13

TNUX 331 R

TNUX 331 L

TNUX 332 R

TNUX 332 L

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

T0001125

T0001877

T0001137

T0001878

78

78

79

79

3/8" 3/16" 1/64"

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

3/8" 3/16" 1/32"

LT 10

LT 10

LT 10

LT 10

TNUX 331 R

TNUX 331 L

TNUX 332 R

TNUX 332 L

TNMP 332 NN

��

TNUX

60° Triangle shape inserts. Suitable for General turning and longitudinal operations, where there is a concern for work piece vibrations.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


TNUX 331 R & L

TNUX 331 R & TNUX 331 L

��

150 0.197 0.012 0.05 1,082

1 180 0.008 0.157 0.011 0.03 590 918 0.098 0.006

210 0.157 0.010 0.03 820

180 0.157 0.011 0.03 918

2230

0.0080.157 0.010 0.03

394820

0.079 0.006280 0.118 0.009 0.02 689

320 0.118 0.008 0.02 590

220 0.118 0.009 0.02 623

3

2800.008

0.118 0.008 0.02230

4920.059 0.005

320 0.118 0.007 0.02 426

350 0.118 0.006 0.02 328

0.079 0.005 0.01 295

0.059 0.004 0.01 262

0.039 0.003 0.01 230

0.005

0.003

0.003

0.008 131 0.039 0.003

98 0.020 0.003

164 0.059 0.004

0.002

0.004

4 210 0.157 0.009 0.03 558 886 0.118 0.006to 250

5230

0.008 0.118

0.005

0.008 0.02 525 689 0.079 0.006to 270

6 ------- 0.118

0.004

0.007 0.02 230 492 0.059 0.008

7 Annealed 0.008 0.118

0.003

0.009 0.02 558 820 0.079 0.006

8 0.008 0.118

0.004

0.009 0.02558 820

0.079 0.006Treated 394 623

140 0.05 820

9to 230

0.008 0.197

0.004

0.012 0.05 558 754 0.118 0.006

0.05 689

210 0.03 754

10260 0.008 0.157

0.005

0.010 0.03 394 623 0.079 0.005

310 0.03 492

Annealed

0.004

0.008 0.055 0.004 0.01 98 164 0.039 0.0030.002

0.02 115

-------- 0.008 0.118 0.003 0.009 0.0282

131 0.059 0.005

0.02 213

-------- 0.008 0.118 0.0030.009 0.02 115 197 0.059 0.005

0.02 92 131 0.005

131

92

0.0590.008



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TNUX 332 R & L

TNUX 332 R & TNUX 332 L

��

TNUX

150 0.197 0.020 0.10 1,082

1 180 0.008 0.157 0.019 0.08 590 918 0.118 0.012

210 0.157 0.017 0.07 820

180 0.157 0.018 0.07 918

2230

0.0080.157 0.017 0.07

394820

0.079 0.012280 0.118 0.016 0.05 689

320 0.118 0.015 0.04 590

220 0.118 0.015 0.04 623

3

2800.008

0.118 0.014 0.04230

4920.079 0.010

320 0.118 0.013 0.03 426

350 0.118 0.012 0.03 328

0.098 0.011 0.02 295

0.083 0.009 0.02 262

0.051 0.008 0.01 230

0.007

0.005

0.005

0.020 131 0.067 0.008

98 0.039 0.007

131 0.087 0.010

0.002

0.006

4 210 0.157 0.009 0.04 558 886 0.118 0.009to 250

5230

0.008 0.118

0.007

0.008 0.02 525 689 0.079 0.007to 270

6 ------- 0.118

0.006

0.007 0.02 230 492 0.079 0.007

7 Annealed 0.008 0.118

0.005

0.009 0.03 558 820 0.079 0.007

8 0.008 0.118

0.006

0.009 0.03558 820

0.079 0.007Treated 394 623

140 0.08 820

9to 230

0.008 0.197

0.006

0.012 0.08 558 754 0.118 0.010

0.08 689

210 0.06 754

10260 0.008 0.157

0.005

0.010 0.06 394 623 0.079 0.005

310 0.06 492

Annealed

0.004

0.020 0.059 0.005 0.00 98 164 0.039 0.0070.002

0.03 115

-------- 0.008 0.118 0.005 0.009 0.0382

131 0.079 0.007

0.03 213

-------- 0.008 0.118 0.0050.009 0.03 115 197 0.079 0.007

0.02 92 131 0.007

131

92

0.0790.008



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning



T P M RShape Clearance Angle Tolerance Insert Type

Triangle 60° 5° Positive rake ClampingSingle sided

d ± 0.05 m ± 0.16s ± 0.13

TPMR 321 NN

TPMR 322 NN

LT 10

LT 10

81

82

3/8" 1/8" 1/64"

3/8" 1/8" 1/32"

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TPMR 160304 NN

TPMR 160308 NN

T0001638

T0001535

�0

60° Triangle shape inserts, with positive rake angle. Suitable for Boring and Internal turningoperations.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

TPMR 321 NN

TPMR 321 NN

��

TPMR

Parting

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4




TPMR 322 NN

TPMR 322 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12








TPMR 322 NN

V B M TShape Clearance Angle Tolerance Insert Type

35° Diamond 5° Positive rake Screw down clamping Single sided

l ± 0.05 m ± 0.16s ± 0.13

VBMT 221 NN

VBMT 331 NN

VBMT 332 NN

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

T0001460

T0000070

T0000071

84

85

86

1/4" 1/8" 1/64"

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

LT 10

LT 10

LT 10

VBMT 221 NN

VBMT 331 NN

VBMT 332 NN

��

VBMT

35° shape inserts, with positive rake angle. Suitable for internal and external Copying operations of complex geometries.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


VBMT 221 NN

VBMT 221 NN

��

150 0.079 0.008 0.01 1,082

1 180 0.004 0.079 0.007 0.01 590 918 0.039 0.007

210 0.079 0.006 0.01 820

180 0.079 0.007 0.01 918

2230

0.0040.079 0.007 0.01

394820

0.039 0.006280 0.059 0.006 0.01 689

320 0.059 0.006 0.01 590

220 0.079 0.006 0.01 623

3

2800.004

0.059 0.006 0.01230

4920.039 0.005

320 0.059 0.005 0.01 426

350 0.059 0.005 0.01 328

0.052 0.004 0.00 295

0.046 0.004 0.00 262

0.040 0.003 0.00 230

0.003

0.004

0.003

0.004 131 0.028 0.003

98 0.024 0.003

164 0.033 0.004

0.002

0.003

4 210 0.079 0.006 0.01 558 886 0.039 0.006to 250

5230

0.004 0.071

0.003

0.006 0.01 525 689 0.039 0.005to 270

6 ------- 0.059

0.003

0.005 0.01 230 492 0.039 0.005

7 Annealed 0.004 0.079

0.003

0.006 0.01 558 820 0.039 0.006

8 0.004 0.079

0.003

0.006 0.01558 820

0.039 0.006Treated 394 623

140 0.01 820

9to 230

0.004 0.079

0.003

0.007 0.01 558 754 0.039 0.007

0.01 689

210 0.01 754

10260 0.004 0.079

0.002

0.006 0.01 394 623 0.039 0.006

310 0.01 492

Annealed

0.002

0.004 0.039 0.004 0.00 98 164 0.024 0.0030.002

0.01 115

-------- 0.004 0.059 0.003 0.006 0.0182

131 0.039 0.005

0.01 213

-------- 0.004 0.059 0.0030.006 0.01 115 197 0.039 0.006

0.01 92 131 0.005

131

92

0.0390.005



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

VBMT 221 NN

VBMT 331 NN

VBMT 331 NN

��

VBMT

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4




VBMT 332 NN

VBMT 332 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12








VBMT 332 NN

V C M TShape Clearance Angle Tolerance Insert Type

35° Diamond 7° Positive rake Screw down clamping Single sided

l ± 0.05 m ± 0.16s ± 0.13

VCMT 331 NN

VCMT 332 NN

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

T0001102

T0001103

88

89

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

LT 10

LT 10

VCMT 331 NN

VCMT 332 NN

��

VCMT

35° shape inserts, with positive rake angle. Suitable for internal and external Copying operations of complex geometries.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


VCMT 331 NN

VCMT 331 NN

��

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

VCMT 331 NN

VCMT �� NN

VCMT 332 NN

��

VCMT

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning



V N M GShape Clearance Angle Tolerance Insert Type

0° No rake Pin / Top clamp Double sided

l ± 0.05 m ± 0.16s ± 0.13

91

92

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

VNMG 331 NN

VNMG 332 NN

VNMG 331 NN

VNMG 332 NN

LT 10

LT 10

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

T0000072

T0000073

35° Diamond

�0

35° shape inserts. Suitable for Semi-roughing external Copying operations.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

VNMG �� NN

VNMG 331 NN

��

VNMG

Parting

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12





1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

Turning






VNMG �� NN

VNMG 332 NN

��

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Machining conditionsTurning Turning









VNMG 332 NN

W N M GShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.08s ± 0.13

WNMG 331 NN

WNMG 332 NN

WNMG 431 NN

WNMG 432 NN

WNMG 432 NR

WNMG 432 NP

WNMG 432 WM

WNMG 433 NN

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

T0000133

T0000137

T0000584

T0000075

T0001437

T0001967

T0000076

T0000077

94

95

96

97

98

99

100

101

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

1/2" 3/16" 1/64"

1/2" 3/16" 1/32"

1/2" 3/16" 1/32"

1/2" 3/16" 1/32"

1/2" 3/16" 1/32"

1/2" 3/16" 3/64"

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

WNMG 331 NN

WNMG 332 NN

WNMG 431 NN

WNMG 432 NN

WNMG 432 NR

WNMG 432 NP

WNMG 432 WM

WNMG 433 NN

WM Wiper Medium chip breaker

��

WNMG

80° Trigon shape inserts, with 6 cutting edges. Suitable for all-purpose Turning, Facing and Boring operations.



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


WNMG �� NN

WNMG 331 NN

��

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

WNMG 331 NN

WNMG 332 NN

WNMG 332 NN

��

WNMG

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


WNMG 431 NN

WNMG 431 NN

��

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

WNMG 431 NN

WNMG 432 NN

WNMG 432 NN

��

WNMG

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


WNMG 432 NR

WNMG 432 NR

��

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

WNMG 432 NR

WNMG 432 NP

WNMG 432 NP

��

WNMG

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


WNMG 432 WM

WNMG 432 WM

�00

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

WNMG 432 WM

WNMG 433 NN

WNMG 433 NN

�0�

WNMG

150 0.197 0.027 0.12 1,082

1 180 0.020 0.197 0.027 0.12 590 918 0.157 0.020

210 0.197 0.024 0.10 820

180 0.197 0.024 0.10 918

2230

0.0200.197 0.024 0.08

394820

0.157 0.018280 0.197 0.021 0.08 689

320 0.157 0.021 0.07 590

220 0.197 0.024 0.08 623

3

2800.020

0.197 0.024 0.08230

4920.157 0.016

320 0.157 0.021 0.06 426

350 0.157 0.021 0.06 328

0.139 0.018 0.05 295

0.118 0.014 0.04 262

0.098 0.011 0.02 230

0.011

0.009

0.009

0.020 131 0.114 0.012

98 0.097 0.010

164 0.134 0.014

0.005

0.011

4 210 0.197 0.020 0.07 558 886 0.157 0.016to 250

5230

0.020 0.197

0.010

0.018 0.06 525 689 0.157 0.014to 270

6 ------- 0.197

0.009

0.018 0.04 230 492 0.157 0.013

7 Annealed 0.020 0.197

0.009

0.018 0.06 558 820 0.157 0.014

8 0.020 0.197

0.011

0.018 0.06558 820

0.157 0.014Treated 394 623

140 0.12 820

9to 230

0.020 0.197

0.011

0.035 0.11 558 754 0.157 0.024

0.11 689

210 0.09 754

10260 0.020 0.197

0.008

0.028 0.08 394 623 0.157 0.020

310 0.07 492

Annealed

0.008

0.020 0.071 0.006 0.01 98 164 0.047 0.0050.002

0.06 115

-------- 0.020 0.197 0.010 0.018 0.0682

131 0.118 0.015

0.06 213

-------- 0.020 0.197 0.0090.018 0.06 115 197 0.118 0.015

0.05 92 131 0.013

131

92

0.1180.015



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning







Turning



W N M PShape Clearance Angle Tolerance Insert Type

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

WNMP 331 NN

WNMP 332 NN

WNMP 432 NN

LT 10

LT 10

LT 10


l ± 0.05 m ± 0.08s ± 0.13

103

104

105

WNMP 331 NN

WNMP 332 NN

WNMP 432 NN

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

1/2" 3/16" 1/32"

T0000306

T0000307

T0000308

�0�

80° Trigon shape inserts, with positive chip breaker geometry. Generates lower cutting forces,suitable for High Temperature Alloys and Stainless Steel operations.



Turning






Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

WNMP 331 NN

WNMP 331 NN

�0�

WNMP

Parting

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


WNMP 332 NN

WNMP 332 NN

�0�

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

WNMP 332 NN

WNMP 432 NN

WNMP 432 NN

�0�

WNMP

Parting

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



Turning


Turning



Turning

STARV D T C B M T


1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

LT 10

LT 10

LT 10

LT 10

35° / 55° / 60° / 80°Diamond

5° Positive rake Screw down clamping Single sided

l ± 0.05 m ± 0.16s ± 0.13

108

109

110

111

ST-CBMT 232-L NN

ST-DBMT 231-L NN

ST-TBMT 231-L NN

ST-VBMT 231-L NN

3/8" 3/16" 1/32"

3/8" 3/16" 1/64"

3/8" 3/16" 1/64"

3/8" 3/16" 1/64"

T0001005

T0000965

T0000996

T0000995

35°55°60°80°

STAR Tool holders on the next page



�0�

Exclusive and unique design inserts with positive chip breaker geometry. Suitable for roughing, semi fininshig and finishing operations due to the ability to use the same tool holder and for 35° - 80° angle operations. Limited in Plunging angle.

ST-CBMT 232-L NN

ST-DBMT 231-L NN

ST-TBMT 231-L NN

ST-VBMT 231-L NN



Turning Turning



Turning



ST-C/D/T/VBMT

h b l f Catalog Nr. Description

T2001348 ST-SXJBL 0.75-0.75 0.75 0.75 5.00 0.98

T2001349 ST-SXJBL 1.00-1.00 0.75 0.75 6.00 1.25

STAR TOOL-HOLDERS

External

Ød l h f ØDmin Catalog Nr. Description

T2001351 ST-A1.00S-SXJBR 1.00 9.75 0.90 0.66 1.18

Internal

�0�

STAR

Parting



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


ST-CBMT 232-L NN

ST-CBMT 232-L

�0�

150 0.197 0.018 0.07 1,148

1 180 0.020 0.197 0.018 0.07 590 984 0.118 0.014

210 0.157 0.016 0.06 820

180 0.197 0.016 0.05 918

2230

0.0200.157 0.016 0.05

514820

0.118 0.012280 0.157 0.014 0.05 689

320 0.138 0.014 0.04 590

220 0.157 0.016 0.05 623

3

2800.020

0.157 0.016 0.05464

4920.098 0.011

320 0.118 0.014 0.03 426

350 0.118 0.014 0.03 328

0.098 0.012 0.02 295

0.079 0.010 0.02 262

0.067 0.008 0.01 230

0.008

0.007

0.007

0.020 131 0.067 0.008

98 0.039 0.007

164 0.079 0.010

0.004

0.008

4 210 0.197 0.016 0.04 558 886 0.118 0.014to 250

5230

0.020 0.157

0.008

0.014 0.03 525 689 0.118 0.013to 270

6 ------- 0.157

0.007

0.014 0.02 230 492 0.098 0.011

7 Annealed 0.020 0.157

0.007

0.014 0.04 558 820 0.118 0.013

8 0.020 0.157

0.009

0.014 0.04558 820

0.118 0.013Treated 394 623

140 0.08 820

9to 230

0.020 0.197

0.009

0.024 0.07 558 754 0.118 0.014

0.07 689

210 0.06 754

10260 0.020 0.197

0.006

0.020 0.05 394 623 0.118 0.012

310 0.05 492

Annealed

0.006

0.020 0.067 0.010 0.01 98 164 0.039 0.0070.004

0.03 115

-------- 0.020 0.118 0.008 0.014 0.0382

131 0.079 0.011

0.03 213

-------- 0.020 0.118 0.0070.014 0.03 115 197 0.079 0.012

0.02 92 131 0.011

131

92

0.0790.012



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

ST-CBMT 232-L

ST-DBMT 231-L NN

ST-DBMT 321-L

�0�

STAR

Parting

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


ST-TBMT 231-L NN

ST-TBMT 321-L

��0

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

-------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

-------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


11

12




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

ST-TBMT 321-L

ST-VBMT 231-L NN

ST-VBMT 321-L

��

STAR

Parting

150 0.118 0.009 0.02 1,148

1 180 0.008 0.098 0.008 0.02 590 918 0.079 0.007

210 0.098 0.007 0.02 820

180 0.098 0.008 0.02 918

2230

0.0080.098 0.008 0.02

394820

0.079 0.006280 0.079 0.007 0.02 689

320 0.079 0.006 0.01 590

220 0.098 0.007 0.02 623

3

2800.008

0.098 0.006 0.02230

4920.079 0.005

320 0.079 0.006 0.01 426

350 0.079 0.006 0.01 328

0.069 0.005 0.01 295

0.061 0.004 0.01 262

0.054 0.003 0.01 230

0.004

0.004

0.004

0.008 131 0.057 0.003

98 0.048 0.003

164 0.067 0.004

0.002

0.004

4 210 0.098 0.007 0.01 558 886 0.079 0.006to 250

5230

0.008 0.079

0.004

0.006 0.01 525 689 0.079 0.005to 270

6 ------- 0.079

0.004

0.006 0.01 230 492 0.079 0.005

7 Annealed 0.008 0.079

0.004

0.007 0.01 558 820 0.079 0.006

8 0.008 0.079

0.004

0.007 0.01558 820

0.079 0.005Treated 394 623

140 0.03 820

9to 230

0.008 0.118

0.004

0.008 0.02 558 754 0.079 0.007

0.02 689

210 0.02 754

10260 0.008 0.098

0.003

0.007 0.02 394 623 0.079 0.006

310 0.02 492

Annealed

0.003

0.008 0.061 0.004 0.01 98 230 0.057 0.0030.002

0.01 115

11 -------- 0.008 0.079 0.004 0.006 0.0182

131 0.079 0.005

0.01 213

12 -------- 0.008 0.079 0.0040.006 0.01 115 197 0.079 0.006

0.01 92 131 0.005

131

92

0.0790.006



conditions

400

480

550

450


Low CarbonSteel

Alloy Steel

HighAlloy Steel




Grey Cast Iron

NodularCast Iron

Nickel BasedAlloys


Ck15, Ck451020, 1045

42 CrMo 4St 50-2Ck6010604140


X5 CrNi 18 9304

X2 CrNiMo 17 2 2316


X8 Cr 7430

X15 Cr 13410

GG 20

GG 25

GG 30

GGG 40

GGG 50

GGG 70

Inconel 625

Inconel 718

Hastelloy C

TiAl 6 V4

T40

G-X260NiCr42


��

ONLY ONE GRADE

The Lamina Multi-Mat LT-10 Grade for Turning and Parting can Machine most materials with

Only one grade LT-10

Steel Stainless Steel Cast Iron Super Alloys

Example Example Example Example35 NC 6 316L FC400-12 Inconel 718

True Multi-Mat inserst for real productivity

ALU-Turning LT - 05 Aluminium

ALUMINIUM-TURNING INSERTSLamina's unique line of Turning inserts for Aluminum and soft material machining. Based on optimized chip breaker geometry and our unique coated grade, LT-05.

��

ALU- Turning





ALU-Turning




Machining conditions ALU-Turning



ALU-Turning




CNGG 431 ALU

CNGG 432 ALU

T0001025

T0001019

115

115

1/2" 3/16" 1/64"

1/2" 3/16" 1/32"

C N G GShape Clearance Angle Tolerance Insert Type


d ± 0.05 m ± 0.08s ± 0.13

LT 05

LT 05

CNGG 431 ALU

CNGG 432 ALU

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��

ISO standard inserts with extreme and unique positive chip breaker geometry, for Aluminum turning operations. Suitable mostly for external operations but good also for internal operations, Roughing - Finishing operations.



ALU-Turning






ALU-Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


For high Si Aluminum, it is recommended to use CNMG 120404 NN.See cutting conditions bellow.

For high Si Aluminum, it is recommended to use CNMP 120408 NN.See cutting conditions bellow.

CNGG 431-ALU

CNGG 432-ALU

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


CNGG 431 ALU

CNGG 432 ALU

��

ALU- Turning

AluminiumGroup Material Brinell

hardnessHB

A max Optimal cutting

No Examples*min max min max

[mm2

min max d.o.c feedconditionsd.o.c [Inch] Speedfeed [inch/rev]


hardnessHB



[mm2


]

---- 0.005 0.014 0.0023 4000

---- 0.010 0.197

0.004 0.012 0.0019 20000.02 to 0.12

0.009

---- Recommended to use CNMG 431 - LT-10

13

14

15 Ampco 25

AISi 6 Cu 4

AISi 12

Si < 4%4% < Si < 8%

Si > 8%

1330

830


hardnessHB



(mm )2min max d.o.c feed

conditionsd.o.c [Inch] Speedfeed [inch/rev]

---- 0.005 0.024 0.0031 4000

---- 0.010 0.197

0.004 0.020 0.0028 20000.02 to 0.12

0.009

---- Recommended to use CNMP 432 NN - LT-10 Ampco 25

AISi 6 Cu 4

AISi 12

Si < 4%4% < Si < 8%

Si > 8%

1330

830

13

14

15

0.02 0.19 0.004 0.012 0.001 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12

0.50 5.0 0.15 0.50 1.50 400 1.0 to 3.0 0.25---- Si > 8% 20014 AlSi 12



ALU-Turning







ALU-Turning



DNGG 331 ALU

DNGG 332 ALU

T0001026

T0001010

117

117

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

D N G GShape Clearance Angle Tolerance Insert Type


d ± 0.05 m ± 0.08s ± 0.13

LT 05

LT 05

DNGG 331 ALU

DNGG 332 ALU

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��




ALU-Turning






ALU-Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4



hardnessHB



(mm )2


---- 0.005 0.012 0.0023 4000

---- 0.010 0.197

0.004 0.010 0.0019 20000.02 to 0.12

0.009

---- Recommended to use LT-10 Ampco 25

AISi 6 Cu 4

AISi 12

Si < 4%4% < Si < 8%

Si > 8%

1330

830


hardnessHB



(mm )2


---- 0.005 0.024 0.0031 4000

---- 0.010 0.197

0.004 0.018 0.0025 20000.02 to 0.12

0.013

----

14

Ampco 25

AISi 6 Cu 4

AISi 12

Si < 4%4% < Si < 8%

Si > 8%

1330

830

Recommended to use LT-10

13

15

DNGG 331-ALU

DNGG 332-ALU

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


DNGG 331 ALU

DNGG 332 ALU

��

ALU- Turning

For high Si Aluminum, it is recommended to use DNMG 110404 NN.See cutting conditions bellow.

For high Si Aluminum, it is recommended to use DNMG 110408 NN.See cutting conditions bellow.

0.02 0.19 0.004 0.012 0.001 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12

0.50 5.0 0.15 0.50 1.50 400 1.0 to 3.0 0.25---- Si > 8% 20014 AlSi 12



ALU-Turning







ALU-Turning



Shape Clearance Angle Tolerance Insert TypeTriangle 60° 0° No rake Pin / Top clamp

Double sidedd ± 0.05 m ± 0.08s ± 0.13

TNGG 331 ALU T0001105 119 3/8" 3/16" 1/64"

T N G G

LT 05

TNGG 331 ALU

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

��




ALU-Turning






ALU-Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


hardnessHB





---- 0.005 0.012 0.0023 4000

---- 0.010 0.197

0.004 0.010 0.0019 20000.02 to 0.12

0.009

---- Ampco 25

AISi 6 Cu 4

AISi 12

Si < 4%4% < Si < 8%

Si > 8%

1330

830

Recommended to use TNMG 331 NN - LT-10

13

14

15

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


TNGG 331 ALU

TNGG 331-ALU

��

ALU- Turning

For high Si Aluminum, it is recommended to use TNMG 160404 NN.See cutting conditions bellow.

0.008 0.157 0.004 0.012 0.0012 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12



ALU-Turning







ALU-Turning



V N G GShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.16s ± 0.13

121

121

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

VNMG 331 NN

VNMG 332 NN

VNGG 331 ALU

VNGG 332 ALU

LT 05

LT 05

3/8" 3/16" 1/64"

3/8" 3/16" 1/32"

T0001006

T0001032

35° Diamond

��0




ALU-Turning






ALU-Turning




1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4



hardnessHB



(mm )2


---- 0.005 0.012 0.0023 1'200

---- 0.010 0.236

0.004 0.010 0.0019 20000.02 to 0.12

0.009

----

13

Ampco 25

AISi 6 Cu 4

AISi 12

Si < 4%4% < Si < 8%

Si > 8%

1330

830

Recommended to use VNMG 331 NN - LT-10


hardnessHB





---- 0.005 0.024 0.0031 1'200

---- 0.010 0.236

0.004 0.018 0.0025 20000.02 to 0.12

0.013

----

13

Ampco 25

AISi 6 Cu 4

AISi 12

Si < 4%4% < Si < 8%

Si > 8%

1330

830

Recommended to use VNMG 332 NN - LT-10

VNGG 331-ALU

VNGG 332-ALU

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


VNGG 331 ALU

VNGG 332 ALU

��

ALU- Turning

For high Si Aluminum, it is recommended to use VNMG 160404 NN.See cutting conditions bellow.

For high Si Aluminum, it is recommended to use VNMG 160408 NN.See cutting conditions bellow.

0.02 0.19 0.004 0.012 0.0012 1300 0.02 to 0.05 0.006---- Si > 8% 65014 AlSi 12

0.02 0.19 0.007 0.017 0.002 1300 0.04 to 0.12 0.010---- Si > 8% 65014 AlSi 12

��

True Multi-Mat insersts for real productivity

Aluminium machining like never before...

° Excellent chip control and surface finishing- even in low Silicon Aluminium.

° Excellent toughness & wear resistance characteristics.

° Double the cutting edges, per insert.

° Can handle with ease depth of cut of up to 6 mm.

° True ability to run un-manned in CNC operation.

° Can be mounted on a standard tool-holder.

ISO 2 CUTTING EDGES

1 2

43

1 2

LAMINA 4 CUTTING EDGES

instead of

Parting LT - 10 Parting

®MULTI-MAT PARTING INSERTS

��

Parting

Aluminium machining like never before...

° Excellent chip control and surface finishing- even in low Silicon Aluminium.

° Excellent toughness & wear resistance characteristics.

° Double the cutting edges, per insert.

° Can handle with ease depth of cut of up to 6 mm.

° True ability to run un-manned in CNC operation.

° Can be mounted on a standard tool-holder.

ISO 2 CUTTING EDGES

1 2

43

1 2

LAMINA 4 CUTTING EDGES

instead of



Parting

Insert designation Grade W R Catalog Nr. Page

Application Guide Parting Grooving Side Turning Chamfering


Parting



Parting



GNTX : � CUTTING EDGE - ForSteelandcastIron.GCTX : � CUTTING EDGE - ForStainlessSteel.

G N T XG C T X

Insert Designation Grade

GNTX 2002 NN

GNTX 3003 NN

GCTX 2002 NN

GCTX 3003 NN

GCTX 2002 PP

GCTX 3003 PP

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

126

127

128

129

130

131

LT 10

LT 10

LT 10

LT 10

LT 10

LT 10

GNTX 2002 NN

GNTX 3003 NN

GCTX 2002 NN

GCTX 3003 NN

GCTX 2002 PP

GCTX 3003 PP

T0001468

T0001470

T0001469

T0001471

T0001880

T0001879

2.0mm 0.18mm

3.0mm 0.18mm

3.0mm 0.25mm

3.0mm 0.25mm

3.0mm 0.25mm

3.0mm 0.25mm

Shape Clearance Angle Tolerance Insert TypeN = 0° No rakeC = 7° rake angle

Speciall ± 0.05 m ± 0.16s ± 0.13

"Doge bone"

��



Parting



Parting



Parting



GNTX / GCTX

T2001305 RILTPNG-L0.500-2.0 0.500.504.750.0630.75left

T2001306 RILTPNG-R0.500-2.0 0.500.504.750.0630.75right

T2001307 RILTPNG-L0.625-2.0 0.620.624.750.0630.75left

T2001308 RILTPNG-R0.625-2.0 0.620.624.750.0630.75right

D� D� L W Pmax Hand Catalog Nr. Description

T2001310 RILTPNG-L0.625-3.0 0.620.624.750.0940.75left

T2001309 RILTPNG-R0.625-3.0 0.620.624.750.0940.75right

T2001311 RILTPNG-L0.750-3.0 0.750.755.000.0940.98left

T2001312 RILTPNG-R0.750-3.00.750.755.000.0940.98right

T2001311 RILTPNG-L1.000-3.01.001.005.000.0940.98left

T2001312 RILTPNG-R1.000-3.0 1.001.005.000.0940.98right

D� D� L W Pmax Hand Catalog Nr. Description

PARTING TOOL HOLDERS

��

Parting

Machining conditions PartingMachining conditionsParting

Insert designation Parting Grooving Side Turning Chamfering

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


GNTX �00� NN

GNTX 2002 NN

��

Material Group Group Material Examples* Brinell No hardness min max min max

Ck15, Ck451020, 1045

150

Low Carbon Steel 1 180

210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250

Austenitic X2 CrNiMo 17 2 2316

230Stainless Steel to 270

X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------


X8 Cr 7430

Annealed

Martensitic X15 Cr 13410

Annealed

Stainless Steel Treated

GG 20140

Grey Cast Iron GG 25to 230

GG 30

GGG 40 210

Nodular Cast IronGGG 50 260

GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

For Stainless Steel please use GCTX insert.

For Exotic material please use GCTX insert.

feed [inch/rev] Speed

426

6560.002 295

590

4920.001

197

164

361

0.002

0.006

0.006

0.001

0.001 0.003

0.001

0.007

0.006

0.006 295

197

722

262

0.002 0.006 426 623

0.002 0.006 295

2300.001 0.002 98

492

4

5

6

7

8

9

10

11

12

Machining conditions PartingMachining conditionsParting Machining conditions PartingMachining conditionsParting


1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

GNTX �00� NN

GNTX 3003 NN

��

Parting

Material Group Group Material Examples* Brinell No hardness min max min max

Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

4X5 CrNi 18 9304

210to 250

Austenitic5 X2 CrNiMo 17 2 2

316230


6X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic --------

FerriticStainless Steel 7 X8 Cr 7

430Annealed

Martensitic8

X15 Cr 13410

Annealed


GG 20140

Grey Cast Iron 9 GG 25to 230

GG 30

GGG 40 210

Nodular Cast Iron 10GGG 50 260

GGG 70 310

Inconel 625

11 Inconel 718 --------

Hastelloy C

12TiAl 6 V4

--------T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

For Stainless Steel please use GCTX insert.

For Exotic material please use GCTX insert.

feed [inch/rev] Speed

426

6560.002 295

590

4920.002

197

164

361

0.002

0.007

0.007

0.002

0.001 0.003

0.002

0.008

0.007

0.007 295

197

722

262

0.003 0.007 426 623

0.003 0.006 295

2300.002 0.003 98

492



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


GCTX �00� NN

GCTX 2002 NN

��

Material Group Group Material Examples* Brinell feed [inch/rev] SpeedNo hardness min max min max

Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

426

6560.002 295

590

4920.001

197

164

361

0.002

0.006

0.006

0.001

0.001 0.003

0.001

0.007

0.006

0.006 295

197

722

262

558 7540.001 0.004

525 689

295 394

0.001 0.004 492 689

0.001 0.004 197 689

0.002 0.006 426 623

0.002 0.006 295

2300.001 0.002 98

0.001 0.002 82 213

0.001 0.002 92223

223

492

492

0.001 0.004 295

0.03 0.003

0.001 0.003

4

5

6

7

8

9

10

11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

GCTX �00� NN

GCTX 3003 NN

��

Parting


Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

426

6560.002 295

590

4920.002

197

164

361

0.002

0.007

0.007

0.002

0.001 0.003

0.002

0.008

0.007

0.007 295

197

722

262

558 7540.002 0.005

525 689

295 394

0.003 0.005 492 689

0.002 0.005 197 689

0.003 0.007 426 623

0.003 0.006 295

2300.002 0.003 98

0.002 0.003 82 213

0.002 0.003 92223

223

492

492

0.002 0.005 295

0.002 0.003

0.002 0.004

4

5

6

7

8

9

10

11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4


GCTX �00� PP

GCTX 2002 PP

��0


Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

426

6560.002 295

590

4920.001

197

164

361

0.002

0.006

0.006

0.001

0.001 0.003

0.001

0.007

0.006

0.006 295

197

722

262

558 7540.001 0.004

525 689

295 394

0.001 0.004 492 689

0.001 0.004 197 689

0.002 0.006 426 623

0.002 0.006 295

2300.001 0.002 98

0.001 0.002 82 213

0.001 0.002 92223

223

492

492

0.001 0.004 295

0.03 0.003

0.001 0.003

4

5

6

7

8

9

10

11

12



1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

GCTX �00� PP

GCTX 3003 PP

��

Parting


Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

426

6560.002 295

590

4920.002

197

164

361

0.002

0.007

0.007

0.002

0.001 0.003

0.002

0.008

0.007

0.007 295

197

722

262

558 7540.002 0.005

525 689

295 394

0.003 0.005 492 689

0.002 0.005 197 689

0.003 0.007 426 623

0.003 0.006 295

2300.002 0.003 98

0.002 0.003 82 213

0.002 0.003 92223

223

492

492

0.002 0.005 295

0.002 0.003

0.002 0.004

4

5

6

7

8

9

10

11

12

ONLY ONE GRADE

The Lamina Multi-Mat LT-30 Grade for Milling and Drilling can machine most materials with

Only one grade LT-30 Steel Stainless Steel Cast Iron Super Alloys


True Multi-Mat inserts for real productivity

��



Milling LT - 30 Multi-Mat MillingLT - 05 Aluminium

MULTI-MAT MILLING INSERTS®

®

��

ADKT

AOMT

APKT

APLX

APMT

LDMT

ODMT

ODMW

OFER

OFMT

RDMT

RDMW

SDKT

SEKN

SEKR

SEKT

SNKX

SPKN

SPKR

SPMT

SPUN

TPKN

TPKR

TPUN

ALU-Milling

Drilling

Solid-Mill

Milling

Insert designation Grade l s P/r D Direction Catalog Nr. Page

Application Guide


Milling MillingMachining conditions


Surfacing Insert Lead angle 90°

Shoulder MillingSlotting Surfacing

A D K TShape Clearance Angle Tolerance Insert Type

80° Diamond 15° Screw Down Clampingno chip breaker

l ± 0.05 m ± 0.013s ± 0.025

136ADKT 1505 PDTR LT 30 M0001573 15 5,56 90º 15º Right

��

Multi purpose 90° milling insert. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.

ADKT 1505 PDTR

Milling




��

ADKT 1505 PDTR

Material Group Group Material Examples* Brinell No hardness min max min max min max

Ck15, Ck451020, 1045

150 984


0.551

0.007

0.013

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.010426

656

Alloy Steel 2230

0.0200.551

0.006590

280 0.009328

525

320 459


220 0.009295

426

High Alloy Steel 3

2800.020

0.394

0.005

0.004

361

320 0.007197

131

328

350 295

262

230

197

0.020

0.394

0.394

0.020

0.020

0.394

0.197

0.118

0.059

0.020

0.551

0.551

0.551

0.551

0.5510.006

0.005

0.013

0.010

0.009

0.009

0.007

0.006

0.007

0.006

0.013

X5 CrNi 18 9304

2100.006 0.010 623 820

to 250


230

0.020 0.551

0.005 0.009 394 689Stainless Steel to 270

X6 CrNiMoTi 17 12 2316 Ti Duplex / Nitronic -------- 0.005 0.007 230 394


X8 Cr 7430

Annealed 0.020 0.551 0.006 0.010 492 754


Annealed 0.020 0.551 0.006 0.010 426

Stainless Steel Treated 295 492

GG 20140

787


0.020 0.551 0.007 0.013 492 722

GG 30 623

GGG 40 210

0.011

656

Nodular Cast IronGGG 50 260 0.020 0.551 0.006 328

0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.394 0.005

0.008 197

T40 0.007 92 131

689

115

0.008

82

131

0.020 0.551 0.01

0.020 0.394

0.020 0.551

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

d.o.c [Inch] feed [Inch/Rev] Speed [SFM]

4

5

6

7

8

9

10

11

12

ADKT

��

Milling


Application Guide




139


AOMT 123608 PETR LT 30 M0001640 15 5,56 90º 15º Right


A O M TShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.013s ± 0.025

Multi purpose 90° milling insert. Suitable for Roughing to Finishing - Slotting, Shoulder, Face and Ramping down milling operations.

��

Milling




AOMT 123608 PETR

AOMTMaterial Group Group Material Examples* Brinell

No hardness min max min max min max

Ck15, Ck451020, 1045

150 984


0.433

0.004

0.015

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.433

0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.433

0.433

0.433

0.433

0.4330.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.009

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.276




X8 Cr 7430

Annealed 0.020 0.276 0.003 0.008 492 754


Annealed 0.020 0.276 0.003 0.008 426


GG 20140

787


0.020 0.354 0.004 0.010 492 722

GG 30 623

GGG 40 210

0.009

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.008

82

131

0.020 0.276 0.00

0.020 0.276

0.020 0.276

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

Milling



Application Guide

Milling MillingCutters




A P K TShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.013s ± 0.025

143

143

144

APKT 53 PDTR

APKT 536 ER

APKT 1705 PETR

LT 30

LT 30

LT 30

M0000021

M0000300

M0001810

5/8" 3/16" 90º 15º Right

5/8" 3/16" 3/32 15º Right

17 5,56 2,4 15º Right

��

Multi purpose 90° milling inserts. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.

Milling




Screw Down Clampingno chip breaker

APKT 53 PDTR & APKT 536 PDTR

��

APKT

D d L H Ap z Catalog Nr. Description

M2001238 RILT730W-W-D1000/2

M2001239 RILT730W-W-D1250/3

M2001240 RILT730W-W-D1500/3

1.0001.0003.5001.2500.5902

1.2501.0003.7501.2500.5903

1.5001.2504.0001.2500.5904

D d a H Ap z Catalog Nr. Description

M2001242 RILT730M-W-D2000/4

M2001243 RILT730M-W-D2500/5

M2001244 RILT730M-W-D3000/6

M2001245 RILT730M-W-D4000/7

M2001246 RILT730M-W-D5000/8

2.0000.7505/161.7500.590 4

2.5001.0003/82.0000.590 5

3.0001.0003/82.0000.590 6

4.0001.2501/22.0000.5907

5.0001.5005/82.0000.590 8

W=Withcoolant

Screw: RILT-1440Wrench: RILT-5515


For Diameter �.000

For Diameter �.��0 to �.�00

W=Withcoolant Screw: RILT-1240Wrench: RILT-5615

Milling Machining conditions MillingMachining conditionsMilling Machining conditions APKT 1604 PDTR & APKT 160424 PDTR


Ck15, Ck451020, 1045

150 984


0.591

0.007

0.013

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.010426

656

Alloy Steel 2230

0.0200.591

0.006590

280 0.009328

525

320 459


220 0.009295

426

High Alloy Steel 3

2800.020

0.472

0.005

0.004

361

320 0.007197

131

328

350 295

262

230

197

0.020

0.472

0.472

0.020

0.020

0.472

0.197

0.118

0.059

0.020

0.591

0.591

0.591

0.591

0.5910.006

0.005

0.013

0.010

0.009

0.009

0.007

0.006

0.007

0.006

0.013

X5 CrNi 18 9304

2100.006 0.010 623 820

to 250


230

0.020 0.591




X8 Cr 7430

Annealed 0.020 0.591 0.006 0.010 492 754


Annealed 0.020 0.591 0.006 0.010 426


GG 20140

787


0.020 0.591 0.007 0.013 492 722

GG 30 623

GGG 40 210

0.011

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.472 0.005 0.007 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.472 0.005

0.008 197

T40 0.007 92 131

689

115

0.008

82

131

0.020 0.591 0.01

0.020 0.472

0.020 0.591

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��0

Milling Machining conditions MillingMachining conditionsMilling Machining conditions APKT 1705 PETR


Ck15, Ck451020, 1045

150 984


0.591

0.007

0.016

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.014426

656

Alloy Steel 2230

0.0200.591

0.007590

280 0.012328

525

320 459


220 0.013295

426

High Alloy Steel 3

2800.020

0.591

0.006

0.004

361

320 0.011197

131

328

350 295

262

230

197

0.020

0.276

0.591

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.591

0.591

0.591

0.591

0.5910.007

0.007

0.014

0.013

0.011

0.012

0.010

0.009

0.009

0.008

0.013

X5 CrNi 18 9304

2100.006 0.009 623 820

to 250


230

0.020 0.354




X8 Cr 7430

Annealed 0.020 0.354 0.004 0.008 492 754


Annealed 0.020 0.354 0.004 0.008 426


GG 20140

787


0.020 0.354 0.008 0.018 492 722

GG 30 623

GGG 40 210

0.018

656


0.0090.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.008

82

131

0.020 0.354 0.00

0.020 0.354

0.020 0.354

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

APKT

��

Milling



Application Guide



148

148

149

149


APLX 1003 PDTR

APLX 100308 PDTR

APLX 100332 PDTR

APLX 100340 PDTR

LT 30

LT 30

LT 30

LT 30

M0000454

M0001151

M0001566

M0001567

10 3,18 90º 15º Right

10 3,18 0,8 15º Right

10 3,18 3,2 15º Right

10 3,18 4,0 15º Right


A P L XShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.013s ± 0.025


��

Milling




APLX 1003 PDTR & APLX 100308 PDTR

M2001225 RILT740W-W-D0500/1

M2001227 RILT740W-W-D0625/2

M2001228 RILT740W-W-D0750/3

M2001229 RILT740W-W-D1000/3

M2001231 RILT740W-W-D1000/4

M2001232 RILT740W-W-D1250/5

M2001233 RILT740W-WL-D0625/2

M2001234 RILT740W-WL-D0750/3

M2001235 RILT740W-WL-D1000/4

M2001236 RILT740W-WL-D1250/5


0.5000.625 3.2501.0000.3541

0.6250.6253.2501.0000.3542

0.7500.7503.5001.2500.3543

1.0001.0003.5001.2500.3543

1.0001.0003.5001.2500.3544

1.2501.0003.7501.2500.3545

0.6250.6256.0001.0000.3542

0.7500.7508.0001.2500.3543

1.0001.0008.0001.2500.3544

1.2501.00010.0001.2500.3545

M2001237 RILT740M-W-D2000/7


2.0000.7505/61.7500.3547

W=Withcoolant



For Diameter 0.�00 to 0.��

For Diameter 0.��0 to �.��0


APLX

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions APLX 1003 PDTR & APLX 100308 PDTR

��


Ck15, Ck451020, 1045

150 984


0.354

0.004

0.015

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.354

0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.354

0.354

0.354

0.354

0.3540.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.009

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.354




X8 Cr 7430

Annealed 0.020 0.354 0.003 0.008 492 754


Annealed 0.020 0.354 0.003 0.008 426


GG 20140

787


0.020 0.354 0.004 0.010 492 722

GG 30 623

GGG 40 210

0.009

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.008

82

131

0.020 0.354 0.00

0.020 0.354

0.020 0.354

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

Milling Machining conditions MillingMachining conditionsMilling Machining conditions APLX 100332 PDTR & APLX 100340 PDTR

��

APLX


Ck15, Ck451020, 1045

150 984


0.354

0.004

0.015

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.354

0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.354

0.354

0.354

0.354

0.3540.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.009

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.354




X8 Cr 7430

Annealed 0.020 0.354 0.003 0.008 492 754


Annealed 0.020 0.354 0.003 0.008 426


GG 20140

787


0.020 0.354 0.004 0.010 492 722

GG 30 623

GGG 40 210

0.009

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.008

82

131

0.020 0.354 0.00

0.020 0.354

0.020 0.354

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

Milling


Application Guide






A P M TShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.013s ± 0.025

154

155

156

156

APMT 32 PDTR

APMT 1135 PDTR

APMT 53 PDTR

APMT 532 PDTR

LT 30

LT 30

LT 30

LT 30

M0000663

M0001133

M0001134

M0001733

3/8" 1/8" 90º 15º Right

11 3,52 90º 15º Right

5/8" 3/16" 90º 15º Right

5/8" 3/16" 1/32" 15º Right


��

Milling




��

APMT 32 PDTR


Ck15, Ck451020, 1045

150 984


0.335

0.004

0.010

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.335

0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.335

0.335

0.335

0.335

0.3350.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.010

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.335




X8 Cr 7430

Annealed 0.020 0.335 0.003 0.009 492 754


Annealed 0.020 0.335 0.003 0.007 426


GG 20140

787


0.020 0.335 0.004 0.011 492 722

GG 30 623

GGG 40 210

0.010

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.007

82

131

0.020 0.335 0.00

0.020 0.276

0.020 0.335

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

APMT

Milling Machining conditions MillingMachining conditionsMilling Machining conditions

��

APMT 1135 PDTR


Ck15, Ck451020, 1045

150 984


0.394

0.004

0.015

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.394

0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.394

0.394

0.394

0.394

0.3940.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.009

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.394




X8 Cr 7430

Annealed 0.020 0.394 0.003 0.008 492 754


Annealed 0.020 0.276 0.003 0.008 426


GG 20140

787


0.020 0.394 0.004 0.010 492 722

GG 30 623

GGG 40 210

0.009

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.008

82

131

0.020 0.276 0.00

0.020 0.276

0.020 0.394

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions APMT 53 PDTR & APMT 532 PDTR


Ck15, Ck451020, 1045

150 984


0.591

0.007

0.013

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.010426

656

Alloy Steel 2230

0.0200.591

0.006590

280 0.009328

525

320 459


220 0.009295

426

High Alloy Steel 3

2800.020

0.472

0.005

0.004

361

320 0.007197

131

328

350 295

262

230

197

0.020

0.472

0.472

0.020

0.020

0.472

0.197

0.118

0.059

0.020

0.591

0.591

0.591

0.591

0.5910.006

0.005

0.013

0.010

0.009

0.009

0.007

0.006

0.007

0.006

0.013

X5 CrNi 18 9304

2100.006 0.010 623 820

to 250


230

0.020 0.591




X8 Cr 7430

Annealed 0.020 0.591 0.006 0.010 492 754


Annealed 0.020 0.591 0.006 0.010 426


GG 20140

787


0.020 0.591 0.007 0.013 492 722

GG 30 623

GGG 40 210

0.011

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.472 0.005 0.007 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.472 0.005

0.008 197

T40 0.007 92 131

689

115

0.008

82

131

0.020 0.591 0.01

0.020 0.472

0.020 0.591

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

APMT

��

Milling


Application Guide




L D M T

*Availability is subject to special agreament


Shape Clearance Angle Tolerance Insert Type80° Diamond 15° Screw Down Clamping

no chip breakerl ± 0.05 m ± 0.013s ± 0.025

157LDMT 1504 PDTR LT 30 M0001772 15 4,76 90º 15º Right


Multi purpose 90° milling insert. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.

��0

Milling




LDMT 1504 PDTR

LDMT


Ck15, Ck451020, 1045

150 984


0.551

0.004

0.015

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.551

0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.551

0.551

0.551

0.551

0.5510.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.009

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.551




X8 Cr 7430

Annealed 0.020 0.276 0.003 0.008 492 754


Annealed 0.020 0.276 0.003 0.008 426


GG 20140

787


0.020 0.551 0.004 0.010 492 722

GG 30 623

GGG 40 210

0.009

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.008

82

131

0.020 0.276 0.00

0.020 0.276

0.020 0.551

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

Milling



Application Guide



135


O D M TShape Clearance Angle Tolerance Insert Type

Octagonal 15° Screw down clampingChip breaker

l ± 0.05 m ± 0.013s ± 0.025

160

161

ODMT 0504 ZZTR

ODMT 060508 TN

LT 30

LT 30

M0000664

M0001104

5 4,76 0,8 Right

6 5,56 0,8 Right

135

135

ChamferingSurfacing

��

Multi purpose 45° milling inserts, with 8 cutting edges. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.

Milling




Screw set: CO6710Key set: CT15

ODMT 060508 TN *Cutters only for ODMT 060508 TN

��

ODMT

D De d a H Ap z Catalog Nr. Description

M2001247 RILT820M-D3000/5

M2001248 RILT820M-D4000/6

M2001249 RILT820M-D5000/8

3.0003.3931.0003/82.0000.157 5

4.0004.3931.2501/22.0000.157 6

5.0005.3931.5005/82.0000.157 8

Milling Machining conditions MillingMachining conditionsMilling Machining conditions ODMT 0504 TR

��


Ck15, Ck451020, 1045

150 1,148


0.138

0.009

0.019

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.017492

787

Alloy Steel 2230

0.0200.138

0.011689

280 0.014426

623

320 558


220 0.013295

492

High Alloy Steel 3

2800.020

0.138

0.006

0.006

426

320 0.011197

131

361

350 295

262

230

197

0.020

0.138

0.138

0.020

0.020

0.138

0.118

0.079

0.039

0.020

0.138

0.138

0.138

0.138

0.1380.011

0.006

0.019

0.017

0.014

0.013

0.011

0.009

0.010

0.008

0.019

X5 CrNi 18 9304

2100.009 0.014 623 820

to 250


230

0.020 0.138




X8 Cr 7430

Annealed 0.020 0.138 0.007 0.014 492 689


Annealed 0.020 0.138 0.007 0.014 492


GG 20140

984


0.020 0.138 0.008 0.020 558 820

GG 30 689

GGG 40 210

0.019

689


0.0100.020 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.138 0.006 0.012 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.138 0.006

0.014 197

T40 0.011 92 131

754

115

0.011

82

131

0.020 0.138 0.01

0.020 0.138

0.020 0.138

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

Milling Machining conditions MillingMachining conditionsMilling Machining conditions ODMT 060508 TN

��

ODMT


Ck15, Ck451020, 1045

150 1,148


0.157

0.009

0.020

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.019492

787

Alloy Steel 2230

0.0200.157

0.008689

280 0.018426

623

320 558


220 0.017295

492

High Alloy Steel 3

2800.020

0.157

0.006

0.006

426

320 0.015197

131

361

350 295

262

230

197

0.020

0.157

0.157

0.020

0.020

0.157

0.118

0.079

0.039

0.020

0.157

0.157

0.157

0.157

0.1570.008

0.006

0.020

0.019

0.018

0.017

0.015

0.009

0.010

0.008

0.020

X5 CrNi 18 9304

2100.007 0.014 623 820

to 250


230

0.020 0.157




X8 Cr 7430

Annealed 0.020 0.157 0.008 0.015 492 689


Annealed 0.020 0.157 0.008 0.015 492


GG 20140

984


0.020 0.157 0.009 0.020 558 820

GG 30 689

GGG 40 210

0.018

689


0.0100.020 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.157 0.006 0.013 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.157 0.007

0.013 197

T40 0.011 92 131

754

115

0.013

82

131

0.020 0.157 0.01

0.020 0.157

0.020 0.157

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

Milling



Application Guide



135


ChamferingSurfacing

O D M WShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.013s ± 0.025

164ODMW 0�0�0� TN LT 30 M0000451 6 5,56 0,8 Right

135

135

��

Multi purpose 45° milling insert, with 8 cutting edges and flat rake surface. Designed for materials that generate short chips. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.

Milling



Insert designation Grade l s P/r D Direction Catalog Nr. Page Screw set: CO6710Key set: CT15

��

ODMW

Screw set: CO6710Key set: CT15


M2001247 RILT820M-D3000/5

M2001248 RILT820M-D4000/6

M2001249 RILT820M-D5000/8

3.0003.3931.0003/82.0000.157 5

4.0004.3931.2501/22.0000.157 6

5.0005.3931.5005/82.0000.157 8

ODMW 060508 TN

Milling Machining conditions MillingMilling Machining conditions ODMW 060508 TN

��

Material Group Group Material Examples* Brinell d.o.c [inch] feed [inch/rev] Vc [SFM]No hardness min max min max min max

Ck15, Ck451020, 1045

150 1148


0.157

0.011

0.020

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.019492

787

Alloy Steel 2230

0.0200.157

0.010689

280 0.017426

623

320 558


220 0.015295

492

High Alloy Steel 3

2800.020

0.157

0.009

0.006

426

320 0.013197

131

361

350 295

262

230

197

0.020

0.157

0.157

0.020

0.020

0.157

0.118

0.079

0.039

0.020

0.157

0.157

0.157

0.157

0.1570.010

0.009

0.020

0.019

0.017

0.015

0.013

0.009

0.010

0.008

0.020

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

984


0.020 0.157 0.010 0.024 558 820

GG 30 689

GGG 40 210

0.020

689


0.0100.020 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

ODMW inserts are not recommended for Stainless Steel

ODMW inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12

Milling Machining conditions MillingMilling Machining conditions


Application Guide



ChamferingSurfacing

O F E RShape Clearance Angle Tolerance Insert TypeOctagonal 25° Screw down clamping

with chip breakerl ± 0.025 m ± 0.025s ± 0.025

167OFER 070405 TN LT 30 M0000033 7 4,76 0,8 Right

135

135

��

OFER

Multi purpose 45° milling insert, with 8 cutting edges and flat rake surface. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.

Milling CuttersMilling Cutters MillingMachining conditionsOFER 070405 TN

��0


M2001250 RILT880M-W-D3000/5

M2001251 RILT880M-W-D4000/6

M2001252 RILT880M-W-D5000/8

3.0003.3931.0003/82.0000.196 5

4.0004.3931.2501/22.0000.196 6

5.0005.3931.5005/82.0000.196 8

W=Withcoolant Clamp screw: RILT-1048LWrench: RILT-5004

Milling CuttersMilling Cutters MillingMachining conditionsOFER 070405 TN

��

OFER


Ck15, Ck451020, 1045

150 1,148


0.157

0.007

0.013

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.012492

787

Alloy Steel 2230

0.0200.157

0.006689

280 0.012426

623

320 558


220 0.010295

492

High Alloy Steel 3

2800.020

0.157

0.005

0.006

426

320 0.010197

131

361

350 295

262

230

197

0.020

0.157

0.157

0.020

0.020

0.157

0.118

0.079

0.039

0.020

0.157

0.157

0.157

0.157

0.1570.006

0.005

0.013

0.012

0.012

0.010

0.010

0.009

0.010

0.008

0.013

X5 CrNi 18 9304

2100.007 0.013 623 820

to 250


230

0.020 0.197




X8 Cr 7430

Annealed 0.020 0.197 0.005 0.013 492 689


Annealed 0.020 0.197 0.005 0.013 492


GG 20140

984


0.020 0.197 0.006 0.016 558 820

GG 30 689

GGG 40 210

0.013

689


0.0100.020 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.138 0.005 0.011 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.138 0.005

0.011 197

T40 0.000 92 131

754

115

0.010

82

131

0.020 0.197 0.00

0.020 0.138

0.020 0.197

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

Milling



Application Guide




O F M TShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.013s ± 0.025

170

170

171

OFMT 05T305 TN

OFMT 050405 TR

OFMT 070405 TN

LT 30

LT 30

LT 30

M0000591

M0000034

M0000592

5 3,97 0,8 Right

5 4,76 0,8 Right

7 4,76 0,8 Right

135

135

ChamferingSurfacing

��

Multi purpose 45° milling inserts, with 8 cutting edges and flat rake surface. Suitable for Roughing to Finishing - Face milling, Plunging and Ramping down operations.

Milling




Screw down clampingChip breaker

��

OFMT 05T305 TN

OFMT 070405 TN

��

OFMT


M2001253 RILT800M-W-D2000/4

M2001254 RILT800M-W-D3000/6

M2001255 RILT800M-W-D4000/7

M2001256 RILT800M-W-D3000/8

2.0002.275 0.7505/161.7500.137 4

3.0003.275 1.0003/82.0000.137 6

4.0004.275 1.2501/22.0000.137 7

5.0005.275 1.5005/82.0000.137 8


M2001257 RILT810M-D3000/6

M2001258 RILT810M-D4000/7

M2001259 RILT810M-D5000/8

3.0003.4721.0003/82.0000.196 6

4.0004.4721.2501/22.0000.196 7

5.0005.4721.5005/82.0000.196 8



Milling Machining conditions MillingMachining conditionsMilling Machining conditions OFMT 05T305 TN & OFMT 050405 TR

��


Ck15, Ck451020, 1045

150 1,148


0.138

0.009

0.019

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.017492

787

Alloy Steel 2230

0.0200.138

0.011689

280 0.014426

623

320 558


220 0.013295

492

High Alloy Steel 3

2800.020

0.138

0.006

0.006

426

320 0.011197

131

361

350 295

262

230

197

0.020

0.138

0.138

0.020

0.020

0.138

0.118

0.079

0.039

0.020

0.138

0.138

0.138

0.138

0.1380.011

0.006

0.019

0.017

0.014

0.013

0.011

0.009

0.010

0.008

0.019

X5 CrNi 18 9304

2100.009 0.014 623 820

to 250


230

0.020 0.138




X8 Cr 7430

Annealed 0.020 0.138 0.007 0.014 492 689


Annealed 0.020 0.138 0.007 0.014 492


GG 20140

984


0.020 0.138 0.008 0.020 558 820

GG 30 689

GGG 40 210

0.019

689


0.0100.020 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.138 0.006 0.012 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.138 0.006

0.014 197

T40 0.011 92 131

754

115

0.011

82

131

0.020 0.138 0.01

0.020 0.138

0.020 0.138

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

Milling Machining conditions MillingMachining conditionsMilling Machining conditions OFMT 070405 TN

��

OFMT


Ck15, Ck451020, 1045

150 1,148


0.177

0.009

0.019

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.017492

787

Alloy Steel 2230

0.0200.177

0.011689

280 0.014426

623

320 558


220 0.013295

492

High Alloy Steel 3

2800.020

0.157

0.006

0.006

426

320 0.011197

131

361

350 295

262

230

197

0.020

0.157

0.157

0.020

0.020

0.157

0.118

0.079

0.039

0.020

0.177

0.177

0.177

0.177

0.1770.011

0.006

0.019

0.017

0.014

0.013

0.011

0.009

0.010

0.008

0.019

X5 CrNi 18 9304

2100.009 0.014 623 820

to 250


230

0.020 0.177




X8 Cr 7430

Annealed 0.020 0.177 0.007 0.014 492 689


Annealed 0.020 0.177 0.007 0.014 492


GG 20140

984


0.020 0.177 0.008 0.020 558 820

GG 30 689

GGG 40 210

0.019

689


0.0100.020 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.157 0.006 0.012 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.157 0.006

0.014 197

T40 0.011 92 131

754

115

0.011

82

131

0.020 0.177 0.01

0.020 0.177

0.020 0.177

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

Milling



Application Guide




CopyingSurfacing Mould-Milling

R D M TShape Clearance Angle Tolerance Insert TypeRound 15º Screw down clamping

chip breakerll ± 0.05 s ± 0.13

175

176

177

177

178

178

RDMT 0602 MO

RDMT 0803 MO

RDMT 1003 MO

RDMT 10T3 MO

RDMT 1204 MO

RDMT 12T3 MO

LT 30

LT 30

LT 30

LT 30

LT 30

LT 30

M0000035

M0000037

M0001875

M0000038

M0000039

M0001876

6 2,38 3 Neutral

8 3,18 4 Neutral

10 3,18 5 Neutral

10 3,97 5 Neutral

12 4,76 6 Neutral

12 3,97 6 Neutral

��

Multi purpose Round inserts. Suitable for Roughing to Semi-finishing Copying of 3D surfaces and Face milling operations.

Milling




Screw down clampingchip breaker

RDMT 1204 MO

��

RDMT 0602 MO

RDMT 0803 MO

��

RDMT

M2001260 RILT060W-D0750/3

M2001261 RILT060W-D1000/3


0.7500.7503.5001.2500.1183

1.0001.0003.5001.2500.1183

M2001262 RILT080W-D1000/3

M2001263 RILT080W-D1250/3


1.0001.0003.5001.2500.1573

1.2501.0003.7501.2500.1573

M2001264 RILT100W-D1000/3

M2001265 RILT100W-D1250/3


1.0001.0003.5001.2500.1963

1.2501.0003.7501.2500.1963

M2001266 RILT120M-W-D1500/3

M2001267 RILT120M-W-D2000/4

M2001268 RILT120M-W-D2500/5

M2001269 RILT120M-W-D3000/6

M2001270 RILT120M-W-D4000/7


1.5000.5000.2591.7500.2363

2.0000.7505/161.7500.2364

2.5001.0003/82.0000.2365

3.0001.0003/82.0000.2366

4.0001.2501/22.0000.2367


Screw: RILT-1440Wrench: RILT-5515For Diameter �.000

W=Withcoolant Screw: RILT-1240Wrench: RILT-5615 Clamp screw: RILT-1025Wrench: RILT-5003

RDMT 10T3 MO

Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 0602 MO


Ck15, Ck451020, 1045

150 1,148


0.079

0.007

0.016

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.016492

787

Alloy Steel 2230

0.0200.079

0.006689

280 0.012426

623

320 558


220 0.013295

492

High Alloy Steel 3

2800.020

0.079

0.005

0.005

426

320 0.011197

131

361

350 295

262

230

197

0.020

0.059

0.079

0.020

0.008

0.059

0.031

0.020

0.020

0.020

0.079

0.059

0.079

0.079

0.0590.005

0.005

0.014

0.013

0.010

0.012

0.010

0.008

0.009

0.007

0.013

X5 CrNi 18 9304

2100.006 0.011 623 820

to 250


230

0.020 0.079




X8 Cr 7430

Annealed 0.020 0.079 0.006 0.010 492 689


Annealed 0.020 0.079 0.006 0.010 492


GG 20140

984


0.020 0.079 0.004 0.018 558 820

GG 30 689

GGG 40 210

0.014

689


0.0080.008 0.020 0.004 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.059 0.005 0.009 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.059 0.005

0.010 197

T40 0.007 92 131

754

115

0.010

82

131

0.020 0.079 0.01

0.020 0.059

0.020 0.079

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 0803 M0


Ck15, Ck451020, 1045

150 1,148


0.118

0.008

0.020

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.018492

787

Alloy Steel 2230

0.0200.118

0.007689

280 0.015426

623

320 558


220 0.016295

492

High Alloy Steel 3

2800.020

0.079

0.005

0.005

426

320 0.014197

131

361

350 295

262

230

197

0.020

0.059

0.079

0.020

0.008

0.059

0.039

0.020

0.020

0.020

0.098

0.059

0.098

0.079

0.0590.006

0.005

0.019

0.016

0.014

0.015

0.013

0.010

0.011

0.009

0.017

X5 CrNi 18 9304

2100.006 0.014 623 820

to 250


230

0.020 0.118




X8 Cr 7430

Annealed 0.020 0.098 0.006 0.012 492 689


Annealed 0.020 0.098 0.006 0.012 492


GG 20140

984


0.020 0.118 0.004 0.020 558 820

GG 30 689

GGG 40 210

0.018

689


0.0100.008 0.020 0.005 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.079 0.005 0.011 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.079 0.005

0.013 197

T40 0.010 92 131

754

115

0.012

82

131

0.020 0.098 0.01

0.020 0.079

0.020 0.098

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

RDMT

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 1003 MO & RDMT 10T3 MO


Ck15, Ck451020, 1045

150 1,148


0.118

0.009

0.023

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.020492

787

Alloy Steel 2230

0.0200.118

0.008689

280 0.017426

623

320 558


220 0.019295

492

High Alloy Steel 3

2800.020

0.079

0.007

0.005

426

320 0.016197

131

361

350 295

262

230

197

0.020

0.059

0.079

0.020

0.008

0.059

0.039

0.020

0.020

0.020

0.098

0.059

0.098

0.079

0.0590.008

0.007

0.020

0.019

0.016

0.017

0.015

0.011

0.013

0.010

0.018

X5 CrNi 18 9304

2100.007 0.015 623 820

to 250


230

0.020 0.118




X8 Cr 7430

Annealed 0.020 0.098 0.006 0.014 492 689


Annealed 0.020 0.098 0.006 0.014 492


GG 20140

984


0.020 0.118 0.007 0.024 558 820

GG 30 689

GGG 40 210

0.020

689


0.0130.008 0.020 0.005 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.079 0.006 0.013 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.079 0.007

0.014 197

T40 0.011 92 131

754

115

0.014

82

131

0.020 0.098 0.01

0.020 0.079

0.020 0.098

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��0

Milling Machining conditions MillingMachining conditionsMilling Machining conditions RDMT 1204 M0 & RDMT 12T3 M0


Ck15, Ck451020, 1045

150 1,148


0.118

0.011

0.028

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.026492

787

Alloy Steel 2230

0.0200.118

0.010689

280 0.020426

623

320 558


220 0.022295

492

High Alloy Steel 3

2800.020

0.079

0.008

0.007

426

320 0.020197

131

361

350 295

262

230

197

0.020

0.059

0.079

0.020

0.020

0.059

0.059

0.039

0.020

0.020

0.098

0.059

0.098

0.079

0.0590.009

0.008

0.026

0.022

0.020

0.020

0.019

0.013

0.015

0.012

0.020

X5 CrNi 18 9304

2100.008 0.018 623 820

to 250


230

0.020 0.118




X8 Cr 7430

Annealed 0.020 0.098 0.007 0.016 492 689


Annealed 0.020 0.098 0.007 0.016 492


GG 20140

984


0.020 0.118 0.008 0.031 558 820

GG 30 689

GGG 40 210

0.024

689


0.0120.012 0.039 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.079 0.007 0.014 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.079 0.008

0.015 197

T40 0.012 92 131

754

115

0.016

82

131

0.020 0.098 0.01

0.020 0.079

0.020 0.098

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

RDMT

��

Milling



Application Guide




CopyingSurfacing Mold-Milling

R D M WShape Clearance Angle Tolerance Insert TypeRound 15º Screw down clamping

chip breakerll ± 0.05 s ± 0.13

181RDMW �0T� MO LT 30 M000155010 3,97 5 Neutral

Multi purpose Round insert, with flat rake surface, designed for hard materials. Suitable for Rou-ghing to Semi-finishing Copying of 3D surfaces and Face milling operations.

��

Milling




RDMW 10T3 M0

M2001264 RILT100W-D1000/3

M2001265 RILT100W-D1250/3


1.0001.0003.5001.2500.1963

1.2501.0003.7501.2500.1963

Screw: RILT-1440Wrench: RILT-5515For Diameter �.000

RDMW

��

Milling Machining conditions MillingMilling Machining conditions RDMW 10T3 M0


Ck15, Ck451020, 1045

150 1148


0.118

0.009

0.023

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.020492

787

Alloy Steel 2230

0.0200.118

0.008689

280 0.017426

623

320 558


220 0.019295

492

High Alloy Steel 3

2800.020

0.079

0.008

0.008

426

320 0.016197

131

361

350 295

262

230

197

0.020

0.059

0.079

0.020

0.012

0.059

0.039

0.020

0.020

0.020

0.098

0.059

0.098

0.079

0.0590.008

0.008

0.020

0.019

0.016

0.017

0.015

0.014

0.014

0.012

0.018

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

984


0.020 0.118 0.007 0.024 558 820

GG 30 689

GGG 40 210

0.020

689


0.0130.008 0.020 0.005 98

558

GGG 70 310 492

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

RDMW inserts are not recommended for Stainless Steel

RDMW inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12

��



Application Guide



ChamferingSurfacing

S D K TShape Clearance Angle Tolerance Insert TypeSquare 90° 15º Screw down clamping

chip breakerl ± 0.08 m ± 0.013s ± 0.025

184SDKT 43 AETN LT 30 M0000171 1/2" 3/16" 45º 20º Neutral

90°

Multi purpose 45° milling insert, designed for high depths of cut. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.

SDKT

��

Milling CuttersMilling Cutters MillingMachining conditionsSDKT 43 AETN

M2001271 RILT670M-W-D2000/4

M2001272 RILT670M-W-D3000/5

M2001273 RILT670M-W-D4000/6

M2001274 RILT670M-W-D5000/7


2.0002.511 0.7505/161.7500.236 4

3.0003.511 1.0003/82.0000.236 5

4.0004.511 1.2501/22.0000.236 6

5.0005.511 1.5005/82.0000.236 7


��

Milling CuttersMilling Cutters MillingMachining conditions

SDKT

SDKT 43 AFTN


Ck15, Ck451020, 1045

150 1,148


0.276

0.008

0.019

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.018492

787

Alloy Steel 2230

0.0200.276

0.007689

280 0.016426

623

320 558


220 0.017295

492

High Alloy Steel 3

2800.020

0.276

0.006

0.006

426

320 0.015197

131

361

350 295

262

230

197

0.020

0.276

0.276

0.020

0.012

0.276

0.197

0.118

0.059

0.020

0.276

0.276

0.276

0.276

0.2760.007

0.006

0.019

0.018

0.016

0.017

0.015

0.013

0.014

0.011

0.019

X5 CrNi 18 9304

2100.007 0.014 623 820

to 250


230

0.020 0.276




X8 Cr 7430

Annealed 0.020 0.276 0.007 0.014 492 689


Annealed 0.020 0.276 0.006 0.014 492


GG 20140

984


0.020 0.276 0.007 0.019 558 820

GG 30 689

GGG 40 210

0.017

689


0.0130.012 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.006 0.011 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.197 0.007

0.013 197

T40 0.011 92 131

754

115

0.011

82

131

0.020 0.118 0.01

0.020 0.197

0.020 0.197

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

Milling



Application Guide




ChamferingSurfacing

S E K NShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping

No chip breakerl ± 0.08 m ± 0.013s ± 0.025

SEKN �� AFTN

SEKN �� AFTN

SEKN �� AFTN

LT30

LT30

LT30

M0000041

M0000042

M0000450

��

��

��

1/2" 3/32" 45º 25º Neutral

1/2" 3/16" 45º 25º Neutral

5/8"3/16" 45º 25º Neutral

90°

Multi purpose 45° milling inserts, designed for high depths of cut. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.

��

Milling




SEKN

SEKN 42 AFTN

M2001275 RILT550M-D2000/4

M2001276 RILT550M-D3000/5

M2001277 RILT550M-D4000/6

M2001278 RILT550M-D5000/7

M2001279 RILT550M-D6000/7


2.0002.511 0.7505/161.7500.236 4

3.0003.511 1.0003/82.0000.236 6

4.0004.511 1.2501/22.0000.236 6

5.0005.511 1.5005/82.0000.236 7

6.0006.511 1.5005/82.0000.236 8


Washer: RILT-2063

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions SEKN 42 AFTN & SEKN 43 AFTN


Ck15, Ck451020, 1045

150 1,148


0.276

0.008

0.013

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.012492

787

Alloy Steel 2230

0.0200.276

0.008689

280 0.012426

623

320 558


220 0.010295

492

High Alloy Steel 3

2800.020

0.276

0.006

0.005

426

320 0.010197

131

361

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.197

0.118

0.059

0.020

0.276

0.276

0.276

0.276

0.2760.008

0.006

0.013

0.012

0.012

0.010

0.010

0.009

0.009

0.008

0.013

X5 CrNi 18 9304

2100.007 0.013 623 820

to 250


230

0.020 0.276




X8 Cr 7430

Annealed 0.020 0.276 0.005 0.013 492 689


Annealed 0.020 0.276 0.005 0.013 492


GG 20140

984


0.020 0.276 0.006 0.016 558 820

GG 30 689

GGG 40 210

0.013

689


0.0090.020 0.118 0.005 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.005 0.011 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.197 0.005

0.013 197

T40 0.011 92 131

754

115

0.011

82

131

0.020 0.197 0.00

0.020 0.197

0.020 0.197

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��0

Milling Machining conditions MillingMachining conditionsMilling Machining conditions SEKN 53 AFTN


Ck15, Ck451020, 1045

150 1,148


0.354

0.008

0.020

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.019492

787

Alloy Steel 2230

0.0200.354

0.008689

280 0.018426

623

320 558


220 0.017295

492

High Alloy Steel 3

2800.020

0.354

0.006

0.005

426

320 0.015197

131

361

350 295

262

230

197

0.020

0.354

0.354

0.020

0.020

0.354

0.197

0.118

0.059

0.020

0.354

0.354

0.354

0.354

0.3540.008

0.006

0.020

0.019

0.018

0.017

0.015

0.011

0.013

0.010

0.020

X5 CrNi 18 9304

2100.010 0.014 623 820

to 250


230

0.020 0.276




X8 Cr 7430

Annealed 0.020 0.354 0.009 0.015 492 689


Annealed 0.020 0.354 0.007 0.015 492


GG 20140

984


0.020 0.354 0.010 0.024 558 820

GG 30 689

GGG 40 210

0.020

689


0.0110.020 0.118 0.005 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.276 0.007 0.013 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.276 0.007

0.013 197

T40 0.011 92 131

754

115

0.013

82

131

0.020 0.354 0.01

0.020 0.276

0.020 0.276

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

SEKN

��

Milling



Application Guide




ChamferingSurfacing

S E K RShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping

chip breakerl ± 0.08 m ± 0.013s ± 0.025

SEKR �� AFTN

SEKR �� AFTN

LT30

LT30

M0000043

M0000044

��

��

1/2" 3/32" 45º 25º Neutral

1/2" 3/16" 45º 25º Neutral

90°

Multi purpose 45° milling inserts, designed for high depths of cut and materials that generate long chips. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.

��

Milling




SEKR

SEKR 42 AFTN

M2001275 RILT550M-D2000/4

M2001276 RILT550M-D3000/5

M2001277 RILT550M-D4000/6

M2001278 RILT550M-D5000/7

M2001279 RILT550M-D6000/7


2.0002.511 0.7505/161.7500.236 4

3.0003.511 1.0003/82.0000.236 6

4.0004.511 1.2501/22.0000.236 6

5.0005.511 1.5005/82.0000.236 7

6.0006.511 1.5005/82.0000.236 8


Washer: RILT-2063

��

Milling Machining conditions MillingMilling Machining conditions SEKR 42 AFTN & SEKR 42 AFTN


Ck15, Ck451020, 1045

150 1,148


0.276

0.009

0.013

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.012492

787

Alloy Steel 2230

0.0200.276

0.008689

280 0.012426

623

320 558


220 0.010295

492

High Alloy Steel 3

2800.020

0.197

0.006

0.005

426

320 0.010197

131

361

350 295

262

230

197

0.020

0.197

0.197

0.020

0.020

0.197

0.197

0.118

0.059

0.020

0.276

0.276

0.276

0.276

0.2760.008

0.006

0.013

0.012

0.012

0.010

0.010

0.009

0.009

0.008

0.013

X5 CrNi 18 9304

2100.007 0.013 623 820

to 250


230

0.020 0.276




X8 Cr 7430

Annealed 0.020 0.276 0.007 0.013 492 689


Annealed 0.020 0.276 0.005 0.013 492


GG 20140

984


0.020 0.276 0.006 0.013 558 820

GG 30 689

GGG 40 210

0.011

689


0.0090.020 0.118 0.005 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.005 0.009 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.197 0.005

0.011 197

T40 0.011 92 131

754

115

0.009

82

131

0.020 0.276 0.00

0.020 0.197

0.020 0.197

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��



Application Guide



ChamferingSurfacing

S E K TShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Screw down clamping

chip breakerl ± 0.08 m ± 0.013s ± 0.025

194

194

SEKT 4(2.5) AGSN

SEKT 43 AFTN

LT 30

LT 30

M0000455

M0000045

1/2" 5/32" 45º 30º Neutral

1/2" 3/16" 45º 25º Neutral

90°

Multi purpose 45° milling inserts, designed for high depths of cut. Suitable for Roughing to Finishing - Face, Plunging and Ramping down milling operations.

��

SEKT

Milling CuttersMilling Cutters MillingMachining conditionsSEKT 43 AFTN

M2001280 RILT600M-D2000/4

M2001281 RILT600M-D2500/5

M2001282 RILT600M-D3000/6

M2001283 RILT600M-D4000/6

M2001284 RILT600M-D5000/7


2.0002.511 0.7503/81.7500.236 4

2.5003.011 1.0003/82.0000.236 5

3.0003.511 1.2501/22.0000.236 6

4.0004.511 1.5005/82.0000.236 6

5.0005.511 1.5005/82.0000.236 7


��

Milling CuttersMilling Cutters MillingMachining conditions

SEKT

SEKT 4(2.5) AGSN & SEKT 43 AFTN


Ck15, Ck451020, 1045

150 1,148


0.276

0.008

0.019

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.018492

787

Alloy Steel 2230

0.0200.276

0.007689

280 0.016426

623

320 558


220 0.017295

492

High Alloy Steel 3

2800.020

0.276

0.006

0.006

426

320 0.015197

131

361

350 295

262

230

197

0.020

0.276

0.276

0.020

0.012

0.276

0.197

0.118

0.059

0.020

0.276

0.276

0.276

0.276

0.2760.007

0.006

0.019

0.018

0.016

0.017

0.015

0.013

0.014

0.011

0.019

X5 CrNi 18 9304

2100.007 0.014 623 820

to 250


230

0.020 0.276




X8 Cr 7430

Annealed 0.020 0.276 0.007 0.014 492 689


Annealed 0.020 0.276 0.006 0.014 492


GG 20140

984


0.020 0.276 0.007 0.019 558 820

GG 30 689

GGG 40 210

0.017

689


0.0130.012 0.118 0.006 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.006 0.011 92 131

Hastelloy C 197

TiAl 6 V4-------- 0.020 0.197 0.007

0.013 197

T40 0.011 92 131

754

115

0.011

82

131

0.020 0.118 0.01

0.020 0.197

0.020 0.197

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

SEKT

��

Milling



Application Guide



Exclusive and unique design insert with 8 cutting edges for 45° and true 90°. Suitable for general purpose milling including Slotting, Square shoulder, Facing and Ramping down operations.

ChamferingSurfacing

S N K XShape Clearance Angle Tolerance Insert TypeSquare 90° l ± 0.08 m ± 0.013

s ± 0.025

SNKX 0�T�-�0°

SNKX 0�T�-��°

LT30

LT30

M0001986

M0001984

��

��

09 3,18 90º 25º Neutral

09 3,18 45º 25º Neutral

90°


Sholder-Milling

��

Milling




SNKX

SNKX 09T3-90°

W=Withcoolant Screw set: VT25Key set: BT08

M2001987 LT990W-D25/3 25 25 100 46 5 3

M2002070 LT990W-D32/4 32 32 110 50 5 4

M2002072 LT990M-W-D40/5 40 16 40 5 5

M2002073 LT990M-W-D50/6 50 22 40 5 6

M2002074 LT990M-W-D63/8 63 22 40 5 8

Catalog Nr. Description

D d H Ap z Catalog Nr. Description

D d L H Ap z

W=Withcoolant Screw set: VT25Key set: BT08

M2002075 LT945W-D25/3 25 25 100 46 5 3

M2002076 LT945W-D32/4 32 32 110 50 5 4

M2001988 LT945M-W-D40/5 40 16 40 5 5

M2002077 LT945M-W-D50/6 50 22 40 5 6

M2002078 LT945M-W-D63/8 63 22 40 5 8

Catalog Nr. Description

D d H Ap z Catalog Nr. Description

D d L H Ap z

SNKX 09T3-45°

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions SNKX 09T3-90°


Ck15, Ck451020, 1045

150 984

Low Carbon Steel 1 180 0.004

0.010

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.020 0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.118

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.118

0.118

0.020

0.020

0.118

0.079

0.059

0.039

0.020

0.118

0.118

0.1180.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.010

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.060




X8 Cr 7430

Annealed 0.020 0.060 0.003 0.009 492 754


Annealed 0.020 0.060 0.003 0.007 426


GG 20140

787


0.020 0.118 0.004 0.011 492 722

GG 30 623

GGG 40 210

0.010

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.060 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.060 0.003

0.007 197

T40 0.006 92 131

689

115

0.007

82

131

0.020 0.060 0.00

0.020 0.060

0.020 0.060

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

0.060

0.060

0.060

0.060

��0

Milling Machining conditions MillingMachining conditionsMilling Machining conditions SNKX 09T3-45°


Ck15, Ck451020, 1045

150 984


0.118

0.006

0.012

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.011426

656

Alloy Steel 2230

0.0200.118

0.004590

280 0.010328

525

320 459


220 0.010295

426

High Alloy Steel 3

2800.020

0.118

0.004

0.006

361

320 0.009197

131

328

350 295

262

230

197

0.020

0.118

0.118

0.020

0.020

0.118

0.079

0.059

0.039

0.020

0.118

0.118

0.118

0.118

0.1180.004

0.004

0.012

0.011

0.010

0.010

0.009

0.008

0.009

0.008

0.012

X5 CrNi 18 9304

2100.006 0.012 623 820

to 250


230

0.020 0.118




X8 Cr 7430

Annealed 0.020 0.118 0.004 0.012 492 754


Annealed 0.020 0.118 0.004 0.010 426


GG 20140

787


0.020 0.118 0.006 0.013 492 722

GG 30 623

GGG 40 210

0.012

656


0.0080.020 0.118 0.006 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.118 0.004 0.008 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.118 0.004

0.010 197

T40 0.008 92 131

689

115

0.010

82

131

0.020 0.118 0.00

0.020 0.118

0.020 0.118

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

SNKX

��

Milling



Application Guide




Surfacing

S P K NShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping

chip breakerl ± 0.08 m ± 0.013s ± 0.025

SPKN 42 EDTR

SPKN 43 EDTR

SPKN 53 EDTR

LT 30

LT 30

LT 30

M0000046

M0000047

M0001673

201

201

202

1/2" 3/32" 75º 15º Right

1/2" 3/16" 75º 15º Right

5/8"3/16" 75º 15º Right

90°

Square inserts with 75° lead angle, designed for high depths of cut. Suitable for Roughing to Fi-nishing Face milling operations.

��

Milling




SPKN

SPKN 42 EDTR

M2001285 RILT750M-D3000/5

M2001286 RILT750M-D4000/6

M2001287 RILT750M-D5000/6

M2001288 RILT750M-D6000/7


3.0003.236 1.0003/82.0000.354 5

4.0004.236 1.2501/22.0000.354 6

5.0005.236 1.5005/82.0000.354 6

6.0006.236 1.5005/82.0000.354 7

Clamp screw: RILT-1006Wrench: RILT-5004

Washer: RILT-2066

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions SPKN 42 EDTR & SPKN 43 EDTR


Ck15, Ck451020, 1045

150 1148


0.276

0.007

0.015

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.014492

787

Alloy Steel 2230

0.0200.276

0.006689

280 0.013426

623

320 558


220 0.013295

492

High Alloy Steel 3

2800.020

0.276

0.005

0.004

426

320 0.011197

131

361

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.197

0.118

0.059

0.020

0.276

0.276

0.276

0.276

0.2760.006

0.005

0.015

0.014

0.013

0.013

0.011

0.008

0.009

0.011

0.015

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

984


0.020 0.276 0.006 0.015 558 820

GG 30 689

GGG 40 210

0.012

689


0.0080.020 0.118 0.004 98

558

GGG 70 310 492

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

SPKN inserts are not recommended for Stainless Steel

SPKN inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12

��

Milling Machining conditions MillingMachining conditionsMilling Machining conditions SPKN 53 EDTR


Ck15, Ck451020, 1045

150 1148


0.354

0.007

0.015

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.014492

787

Alloy Steel 2230

0.0200.354

0.006689

280 0.013426

623

320 558


220 0.013295

492

High Alloy Steel 3

2800.020

0.354

0.005

0.004

426

320 0.011197

131

361

350 295

262

230

197

0.020

0.354

0.354

0.020

0.020

0.354

0.236

0.118

0.059

0.020

0.354

0.354

0.354

0.354

0.3540.006

0.005

0.015

0.014

0.013

0.013

0.011

0.008

0.009

0.011

0.015

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

984


0.020 0.354 0.006 0.015 558 820

GG 30 689

GGG 40 210

0.012

689


0.0080.020 0.118 0.004 98

558

GGG 70 310 492

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

SPKN inserts are not recommended for Stainless Steel

SPKN inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12

SPKN

��

Milling



Application Guide




Surfacing

S P K RShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Clamping

chip breakerl ± 0.08 m ± 0.013s ± 0.025

SPKR 42 EDTR

SPKR 43 EDTR

LT 30

LT 30

M0000048

M0000049

205

205

1/2" 3/32" 75º 15º Right

1/2" 3/16" 75º 15º Right

90°

Square inserts, with 75° lead angle designed for high depths of cut and materials that generate long chips. Suitable for Roughing to Finishing Face milling operations.

��

Milling




SPKR

SPKR 42 EDTR

M2001285 RILT750M-D3000/5

M2001286 RILT750M-D4000/6

M2001287 RILT750M-D5000/6

M2001288 RILT750M-D6000/7


3.0003.236 1.0003/82.0000.354 5

4.0004.236 1.2501/22.0000.354 6

5.0005.236 1.5005/82.0000.354 6

6.0006.236 1.5005/82.0000.354 7


Washer: RILT-2066

��

Milling Machining conditions


Application Guide

MillingMilling Machining conditions


SPKR 42 EDTR & SPKR 43 EDTR


Ck15, Ck451020, 1045

150 1,148


0.276

0.007

0.013

623 984

210 853

42 CrMo 4St 50-2Ck6010604140

180 0.012492

787

Alloy Steel 2230

0.0200.276

0.006689

280 0.011426

623

320 558


220 0.011295

492

High Alloy Steel 3

2800.020

0.276

0.005

0.004

426

320 0.010197

131

361

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.197

0.118

0.059

0.020

0.276

0.276

0.276

0.276

0.2760.006

0.005

0.013

0.012

0.011

0.011

0.010

0.008

0.009

0.011

0.013

X5 CrNi 18 9304

2100.007 0.010 623 820

to 250


230

0.020 0.020




X8 Cr 7430

Annealed 0.020 0.197 0.005 0.010 492 689


Annealed 0.020 0.197 0.005 0.010 492


GG 20140

984


0.020 0.276 0.006 0.013 558 820

GG 30 689

GGG 40 210

0.011

689


0.0080.020 0.118 0.004 98

558

GGG 70 310 492

197

Inconel 625 115

Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.394 0.005

0.008 197

T40 0.007 92 131

754

115

0.009

82

131

0.020 0.197 0.00

0.020 0.394

0.020 0.020

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

Milling Machining conditions


MillingMilling Machining conditions




Application Guide


Shoulder MillingSlotting

S P M TShape Clearance Angle Tolerance Insert TypeSquare 90° 11º Clamping


207SPMT 4(2.5)2 LT 30 M0001226 1/2" 5/32" 1/32" Nutral

90°

Surfacing

Multi purpose 90° milling insert with 4 cutting edges. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.

SPMT

��

Milling Machining conditions MillingMilling Machining conditions SPMT 4(2.5)2


Ck15, Ck451020, 1045

150 984


0.354

0.004

0.015

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.354

0.003590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.003

0.004

361

320 0.006197

131

328

350 295

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.157

0.079

0.039

0.020

0.354

0.354

0.354

0.354

0.3540.003

0.003

0.010

0.009

0.007

0.007

0.006

0.006

0.006

0.006

0.009

X5 CrNi 18 9304

2100.004 0.009 623 820

to 250


230

0.020 0.354




X8 Cr 7430

Annealed 0.020 0.354 0.003 0.008 492 754


Annealed 0.020 0.354 0.003 0.008 426


GG 20140

787


0.020 0.354 0.004 0.010 492 722

GG 30 623

GGG 40 210

0.009

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.197 0.003 0.006 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.197 0.003

0.007 197

T40 0.006 92 131

689

115

0.008

82

131

0.020 0.354 0.00

0.020 0.354

0.020 0.354

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

�00



Application Guide


ChamferingSurfacing

S P G -Shape Clearance Angle Tolerance Insert TypeSquare 90° 11º Clamping


210SPG �� LT 30 M00000501/2"1/8" 1/32" Neutral

90°

Multi purpose Square insert with corner radius and a flat rake surface. Use for face milling. Rou-ghing to finishing.

�0�

SPG

Milling CuttersMilling Cutters MillingMachining conditionsSPG 422

M2001285 RILT750M-D3000/5

M2001286 RILT750M-D4000/6

M2001287 RILT750M-D5000/6

M2001288 RILT750M-D6000/7


3.0003.236 1.0003/82.0000.354 5

4.0004.236 1.2501/22.0000.354 6

5.0005.236 1.5005/82.0000.354 6

6.0006.236 1.5005/82.0000.354 7

W=Withcoolant Clamp screw: RILT-1006Wrench: RILT-5004

Washer: RILT-2066

�0�

Milling CuttersMilling Cutters MillingMachining conditionsSPG 422


Ck15, Ck451020, 1045

150 984


0.276

0.007

0.013

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.011426

656

Alloy Steel 2230

0.0200.276

0.006590

280 0.010328

525

320 459


220 0.011295

426

High Alloy Steel 3

2800.020

0.276

0.005

0.004

361

320 0.009197

131

312

350 262

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.197

0.118

0.059

0.020

0.276

0.276

0.276

0.276

0.2760.006

0.005

0.013

0.011

0.010

0.011

0.009

0.006

0.007

0.006

0.013

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

787


0.020 0.276 0.006 0.014 492 722

GG 30 623

GGG 40 210

0.011

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

SPUN inserts are not recommended for Stainless Steel

SPUN inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12

�0�

SPG

Milling



Application Guide



Sholder MillingSlotting

T P K NShape Clearance Angle Tolerance Insert TypeTriangle 60° 11° Clamping

no chip breakerl ± 0.05 m ± 0.013s ± 0.025

TPKN 32 PDTR

TPKN 43 PDTR

LT 30

LT 30

M0000051

M0000052

213

214

3/8" 1/8" 90º 15º Right

1/2" 3/16" 90º 15º Right

Surfacing

Multi purpose 90° milling insert with 3 cutting edges. Use for slotting, shoulder milling and face milling. Roughing to finishing.

�0�

Milling




TPKN

TPKN 32 PDTR

TPKN 43 PDTR

M2001289 RILT310M-D3000/5

M2001290 RILT310M-D4000/6

M2001291 RILT310M-D5000/6


3.0001.0003/82.0000.5515

4.0001.2501/22.0000.5516

5.0001.5005/82.0000.5517

M2001292 RILT320M-D4000/5

M2001293 RILT320M-D5000/6

M2001294 RILT320M-D6000/7


4.0001.2501/22.0000.7875

5.0001.5005/82.0000.7876

6.0001.5005/82.0000.7877


Washer: RILT-2064


Washer: RILT-2088

�0�

Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKN 32 PDTR


Ck15, Ck451020, 1045

150 984


0.472

0.006

0.010

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.276

0.005590

280 0.009328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.005

0.004

394

320 0.007295

131

361

350 328

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.197

0.118

0.059

0.020

0.472

0.472

0.276

0.276

0.2760.005

0.005

0.010

0.009

0.009

0.007

0.007

0.006

0.007

0.006

0.010

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

787


0.020 0.472 0.006 0.010 492 722

GG 30 623

GGG 40 210

0.008

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

TPKN inserts are not recommended for Stainless Steel

TPKN inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12

�0�

Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKN 43 PDTR


Ck15, Ck451020, 1045

150 984


0.709

0.007

0.011

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.709

0.006590

280 0.009328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.472

0.005

0.004

361

320 0.007197

131

312

350 262

262

230

197

0.020

0.472

0.472

0.020

0.020

0.472

0.197

0.118

0.059

0.020

0.709

0.709

0.709

0.551

0.5510.006

0.005

0.011

0.009

0.009

0.007

0.007

0.006

0.007

0.006

0.011

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

787


0.020 0.709 0.007 0.011 492 722

GG 30 623

GGG 40 210

0.009

656


0.0070.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

TPKN inserts are not recommended for Stainless Steel

TPKN inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12 TPKN

�0�

Milling



Application Guide




T P K RShape Clearance Angle Tolerance Insert TypeTriangle 60° 11° Clamping

Chip breakerl ± 0.05 m ± 0.013s ± 0.025

TPKR 1603 PDTR

TPKR 2204 PDTR

LT 30

LT 30

M0000053

M0000983

217

218

3/8" 1/8" 90º 15º Right

1/2" 3/16" 90º 15º Right

Surfacing

Multi purpose 90° milling insert, with 3 cutting edges, designed for materials that generate long chips. Suitable for Roughing to Finishing - Slotting, Shoulder Face milling operations.

�0�

Milling




TPKR

TPKR 32 PDTR

TPKR 43 PDTR

M2001289 RILT310M-D3000/5

M2001290 RILT310M-D4000/6

M2001291 RILT310M-D5000/6


3.0001.0003/82.0000.5515

4.0001.2501/22.0000.5516

5.0001.5005/82.0000.5517

M2001292 RILT320M-D4000/5

M2001293 RILT320M-D5000/6

M2001294 RILT320M-D6000/7


4.0001.2501/22.0000.7875

5.0001.5005/82.0000.7876

6.0001.5005/82.0000.7877


Washer: RILT-2064


Washer: RILT-2088

�0�

Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKR 32 PDTR


Ck15, Ck451020, 1045

150 984


0.472

0.006

0.009

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.007426

656

Alloy Steel 2230

0.0200.472

0.006590

280 0.007328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.005

0.004

394

320 0.007295

131

361

350 328

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.197

0.118

0.059

0.020

0.472

0.472

0.472

0.472

0.4720.006

0.005

0.009

0.007

0.007

0.007

0.007

0.006

0.007

0.006

0.009

X5 CrNi 18 9304

2100.005 0.008 623 820

to 250


230

0.020 0.472




X8 Cr 7430

Annealed 0.020 0.197 0.005 0.009 492 754


Annealed 0.020 0.197 0.005 0.009 426


GG 20140

787


0.020 0.276 0.006 0.009 492 722

GG 30 623

GGG 40 210

0.007

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.394 0.005

0.008 197

T40 0.007 92 131

689

115

0.007

82

131

0.020 0.197 0.00

0.020 0.394

0.020 0.472

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��0

Milling Machining conditions MillingMachining conditionsMilling Machining conditions TPKR 43 PDTR


Ck15, Ck451020, 1045

150 984


0.709

0.007

0.010

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.709

0.006590

280 0.008328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.472

0.005

0.004

361

320 0.007197

131

312

350 262

262

230

197

0.020

0.472

0.472

0.020

0.020

0.472

0.197

0.118

0.059

0.020

0.709

0.709

0.709

0.709

0.7090.006

0.005

0.016

0.009

0.008

0.007

0.007

0.006

0.007

0.006

0.014

X5 CrNi 18 9304

2100.007 0.010 623 820

to 250


230

0.020 0.709




X8 Cr 7430

Annealed 0.020 0.591 0.007 0.011 492 754


Annealed 0.020 0.591 0.007 0.011 426


GG 20140

787


0.020 0.709 0.007 0.010 492 722

GG 30 623

GGG 40 210

0.008

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625 115

Inconel 718 -------- 0.020 0.394 0.005 0.007 92 125

Hastelloy C 213

TiAl 6 V4-------- 0.020 0.394 0.005

0.008 197

T40 0.007 92 131

689

115

0.009

82

131

0.020 0.591 0.01

0.020 0.394

0.020 0.709

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450


4

5

6

7

8

9

10

11

12

��

TPKR

Milling



Application Guide




T P G -Shape Clearance Angle Tolerance Insert TypeTriangle 60° 11° Clamping


TPG 322 LT 30 M0000054 2213/8" 1/8" 90º 15º Right

Surfacing

Multi purpose 90° milling insert, with 3 cutting edges and corner radius. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.

��

Milling




TPG

TPG 322

M2001289 RILT310M-D3000/5

M2001290 RILT310M-D4000/6

M2001291 RILT310M-D5000/6


3.0001.0003/82.0000.5515

4.0001.2501/22.0000.5516

5.0001.5005/82.0000.5517


Washer: RILT-2064

��

Milling Cutters TPG 322


Ck15, Ck451020, 1045

150 984


0.472

0.006

0.010

590 853

210 722

42 CrMo 4St 50-2Ck6010604140

180 0.009426

656

Alloy Steel 2230

0.0200.276

0.005590

280 0.009328

525

320 459


220 0.007295

426

High Alloy Steel 3

2800.020

0.276

0.005

0.004

394

320 0.007295

131

361

350 328

262

230

197

0.020

0.276

0.276

0.020

0.020

0.276

0.197

0.118

0.059

0.020

0.472

0.472

0.276

0.276

0.2760.005

0.005

0.010

0.009

0.009

0.007

0.007

0.006

0.007

0.006

0.010

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140

787


0.020 0.472 0.006 0.010 492 722

GG 30 623

GGG 40 210

0.008

656


0.0060.020 0.118 0.004 98

525

GGG 70 310 426

197

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480

550

450

TPUN inserts are not recommended for Stainless Steel

TPUN inserts are not recommended for Exotic materials

4

5

6

7

8

9

10

11

12

��

Milling Cutters

ALU-Milling LT - 05 Aluminium

ALUMINIUM-MILLING INSERTSLamina's unique line of Milling inserts for Aluminum and soft material machining.Based on revolutionary geometry and our uniquecoated grade, LT-05.

ALU-Milling

��

ALU-Milling



Application Guide

ALU-Milling MillingMachining conditions


Milling bodies APGT 10 - see cutters of APLX 10 (page 147) APGT 16 - see cutters of APKT 16 (page 142)



A P G TShape Clearance Angle Tolerance Insert Type


l ± 0.05 m ± 0.013s ± 0.025

225

225

APGT 1003 PDER ALU

APGT 53 PDER ALU

LT 05

LT 05

M0001007

M0000963

16 4,76 90º 15º Right

16 4,76 2,4 15º Right

��

Highly positive inserts with a unique coating and 90° lead angle for Aluminum. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.

ALU-Milling




For high Si Aluminum, it is recommended to use APLX 1003 PDTR.See cutting conditions bellow.

APGT 1003 ALU

APGT 53 Alu

��

ALU-Milling

For high Si Aluminum, it is recommended to use APKT 1604 PDTR.See cutting conditions bellow.

Group Material Examples* Brinell d.o.c [Inch] feed [inch/tooth] SpeedNo hardness min max min max min max

Aluminum

----

----

----

Si < 4%4% < Si < 8%

Si > 8%

0.005 0.008 13300.012 0.354

0.004 0.007 830

Recommended to use APLX 1003 PDTR - LT-30

4000

2000

13

13

14 AlSi 12

AlMgSi 1

AlSi 6 Cu 4


AluminumAluminum

----

----

----

Si < 4%4% < Si < 8%

Si > 8%

0.006 0.013 13300.020 0.610

0.005 0.010 830

4000

2000

Recommended to use APKT 1604 PDTR - LT-30

13

13

14 AlSi 12

AlMgSi 1

AlSi 6 Cu 4

Aluminum

---- AISi 12Si > 8% 0.02 0.63 0.006 0.010 650 130014

Aluminum

---- AISi 12Si > 8% 0.02 0.35 0.003 0.008 650 130014

ALU-Milling



Application Guide




ChamferingSurfacing

S E G TShape Clearance Angle Tolerance Insert TypeSquare 90° 20º Screw down clamping

chip breakerl ± 0.08 m ± 0.013s ± 0.025

227SEGT 43 AFEN ALU LT 30 M0001008 12 4,76 45º 25º Neutral

90°

Milling bodies SEGT 1204 - see cutters of SEKT 1204 (page 190)

��

Highly positive inserts with a unique coating and 90° lead angle for Aluminum. Suitable for Roughing to Finishing - Slotting, Shoulder and Face milling operations.

ALU-Milling




Screw down clampingchip breaker

SEGT 43 ALU

��

ALU-Milling

For high Si Aluminum, it is recommended to use SEKT 43 AFTN.See cutting conditions bellow.


AluminumAluminum

----

----

----

Si < 4%4% < Si < 8%

Si > 8%

0.006 0.016 13300.012 0.276

0.005 0.014 830

Recommended to use SEKT 1204 AFTN - LT-30

4000

2000

13

13

14 AlSi 12

AlMgSi 1

AlSi 6 Cu 4Aluminum

---- AISi 12Si > 8% 0.02 0.27 0.008 0.0.017 650 130014

ONLY ONE GRADE

The Lamina Multi-Mat LT-30 Grade for Milling and Drilling can Machine most materials with

Only one grade LT-30 Steel Stainless Steel Cast Iron Super Alloys


True Multi-Mat inserts for real productivity

��0



Drilling LT - 30 Drilling

®MULTI-MAT DRILLING INSERTS

��

Drilling

l

Drilling

Insert designation Grade l s r Direction Catalog Nr. Page

Drilling DrillingMachining conditions


W C M XShape Clearance Angle Tolerance Insert Type

80° Diamond 7° Positive rake Speciald ± 0.05 m ± 0.08s ± 0.13

231

232

233

234

WCMX 2(1.5)2 NN

WCMX 050308 NN

WCMX 3(2.5)2 NN

WCMX 433 NN

LT 30

LT 30

LT 30

LT 30

M3001122

M3001121

M3000953

M3000954

1/4" 3/32" 1/32" Neutral

5 3,18 0,8 Neutral

3/8" 5/32" 1/32" Neutral

1/2" 3/16" 3/64" Neutral

��

Trigon inserts for Drilling. Strong cutting edges for high feeds.

Drilling


Drilling DrillingMachining conditions


Special

WCMX 2(1.5)2 NN

��

Drilling

l


Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400

480WCMX are not recommended for

Hardened Steel

WCMX are not recommended for White Cast Iron

550

450

900

0.002

0.002

0.002

600 770

670

0.005 400 770

630

0.005 400 570

500

0.005 230 570

500

0.004 230 430

330

0.003

0.004

0.002 570 770

0.003 400 700

0.003 230 400

0.003 500 700

0.003 500

400 570 700

0.004

0.005

0.005

0.004

0.004

770

0.004 0.006 500 700

570

0.006 670

0.004 400 570

500

0.002 0.004 80 120

0.0020.004 200

0.004 90 130

120

4

5

6

7

8

9

10

11

12

Drilling Machining conditions DrillingMachining conditionsDrilling Machining conditions WCMX 050308 NN

��


Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400


Hardened Steel


550

450

900

600 770

670

400 770

630

400 570

500

230 570

500

230 430

330

570 770

400 700

230 400

500 700

500

400 570 700

770

500 700

570

670

400 570

500

80 120

200

90 130

120

0.002

0.0060.002

0.002 0.006

0.006

0.005

0.002

0.003

0.003

0.003

0.003

0.004 0.007

0.0060.004

0.002 0.004

0.0020.004

0.004

0.003

0.004

0.004

0.005

0.006

0.005

0.005

4

5

6

7

8

9

10

11

12

Drilling Machining conditions DrillingMachining conditionsDrilling Machining conditions WCMX 3(2.5)2 NN

��

Drilling

l


Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400


Hardened Steel


550

450

900

600 770

670

400 770

630

400 570

500

230 570

500

230 430

330

570 770

400 700

230 400

500 700

500

400 570 700

770

500 700

570

670

400 570

500

80 120

200

90 130

120

0.002

0.0060.002

0.002 0.007

0.007

0.006

0.002

0.003

0.004

0.003

0.003

0.004 0.009

0.0070.004

0.002 0.005

0.0020.005

0.004

0.003

0.005

0.005

0.006

0.006

0.006

0.006

4

5

6

7

8

9

10

11

12

Drilling Machining conditionsDrilling Machining conditions WCMX 433 NN

��


Ck15, Ck451020, 1045

150


210

42 CrMo 4St 50-2Ck6010604140

180

Alloy Steel 2230

280

320


220

High Alloy Steel 3

280

320

350

X5 CrNi 18 9304

210to 250





X8 Cr 7430

Annealed


Annealed


GG 20140


GG 30

GGG 40 210


GGG 70 310

Inconel 625

Inconel 718 --------

Hastelloy C

TiAl 6 V4--------

T40

Nickel BasedAlloys


G-X260NiCr42

400


Hardened Steel


550

450

900

600 770

670

400 770

630

400 570

500

230 570

500

230 430

330

570 770

400 700

230 400

500 700

500

400 570 700

770

500 700

570

670

400 570

500

80 120

200

90 130

120

0.004

0.009

0.0050.010

0.010

0.009

0.004

0.004

0.005

0.005

0.005

0.006 0.011

0.0090.005

0.005 0.007

0.0050.007

0.006

0.006

0.007

0.007

0.009

0.011

0.010

0.010

4

5

6

7

8

9

10

11

12

Drilling Machining conditionsDrilling Machining conditions

LT - Solid Mill

Index2 flute short 30º

2 flute long 30º

2 flute long 30º ball nose

3 flute short 30º

4 flute short 30º

4 flute long 30º

4 flute long 30º ball nose

6,8 flute long 45º

6 flute extra long 45º

6,8 flute long 45º positive rake

Multi flute rougher 20º

Multi flute rougher 45º

GroupSC410CSC410F

SC415CSC415F

SC420CSC420F

SC425CSC425F

SC430CSC430F

SC435CSC435F

SC440CSC440F

SC445CSC445F

SC450CSC450F

SC455CSC455F

SC460CSC460F

SC465CSC465F

The advantages of LT - Solid Mill line:

Newly developed grade LT-40, is madefrom fine grain powder and coated withspeciallydevelopedPVDcoating,toprovide high hardness and at the sametimehightoughness.Special production processes allow forimproved wear resistance and smoothermachining. Onegradeforallmaterials.

What does our LT - Solid Mill line offer?

Excellentperformanceatdrycuttingconditions. Excellent performance on hardened steel(HRc65). Optimizedgeometryformachiningtoughmaterials. Topperformanceonalargerangeofmaterials. Extendedtool lifeatregularandextremeconditions. Superiorsurfacefinish. Fastchipejection.

•

•

•

•

•

•

•

•

••

So

lid M

ill

The Lamina, Multi-Material, Solid Carbide Milling Line LT - 40, One grade

for all materials

��

Milling

Solid-Mill

Solid-Mill Solid-MillSolid-Mill

2 FLUTE, SHORT LENGTH, 30° HELIX

2.0 -14 -28 4,0 0 -6 6,0 40,0 3.0 -14 -28 6,0 0 -6 8,0 45,0 4.0 -20 -38 6,0 0 -8 11,0 45,0 5.0 -20 -38 6,0 0 -8 13,0 50,0 6.0 -20 -38 6,0 0 -8 13,0 50,0 8.0 -25 -47 8,0 0 -9 19,0 60,0 10.0 -25 -47 10,0 0 -9 22,0 70,0 12.0 -32 -59 12,0 0 -11 26,0 75,0 16.0 -32 -59 16,0 0 -11 32,0 100,0 20.0 -40 -73 20,0 0 -13 38,0 105,0

Catalog Nr. Product designation

M4000723 2 flute 2mm short 30º cyl. M4000724 2 flute 3mm short 30º cyl. M4000725 2 flute 4mm short 30º cyl. M4000726 2 flute 5mm short 30º cyl. M4000727 2 flute 6mm short 30º cyl. M4000728 2 flute 8mm short 30º cyl. M4000729 2 flute 10mm short 30º cyl. M4000730 2 flute 12mm short 30º cyl. M4000731 2 flute 16mm short 30º cyl. M4000732 2 flute 20mm short 30º cyl.

SC410C Cylindrical

For full machining recommendations - see pages 236 - 238

Application:

D1: Mill Diameter D2: Shank Diameter L1: Length of cut L2: Overall length

D1 Tolerance D2 Tolerance L1 L2 e8 µm h6 µm

2 FLUTE, LONG LENGTH, 30° HELIX

6.0 -20 -38 6,0 0 -8 20,0 60,0

8.0 -25 -47 8,0 0 -9 25,0 70,0

10.0 -25 -47 10,0 0 -9 30,0 90,0

12.0 -32 -59 12,0 0 -11 30,0 90,0

16.0 -32 -59 16,0 0 -11 50,0 110,0

20.0 -40 -73 20,0 0 -13 55,0 110,0


M4000743 2flute6mmlong30ºcyl.






SC415C Cylindrical D� Tolerance D� Tolerance L� L� e� µm h� µm

��


2 FLUTE, LONG LENGTH, 30º HELIX, BALL NOSE

2.0 -14 -28 6,0 0 -6 5,0 50,0 3.0 -14 -28 6,0 0 -6 8,0 60,0 4.0 -20 -38 6,0 0 -8 8,0 70,0 5.0 -20 -38 6,0 0 -8 10,0 80,0 6.0 -20 -38 6,0 0 -8 12,0 90,0 8.0 -25 -47 8,0 0 -9 14,0 100,0 10.0 -25 -47 10,0 0 -9 18,0 100,0 1 2.0 -32 -59 12,0 0 -11 22,0 110,0 16.0 -32 -59 16,0 0 -11 30,0 140,0 20.0 -40 -73 20,0 0 -13 38,0 160,0


M4000755 2 flute 2mm long 30º B.N.cyl. M4000756 2 flute 3mm long 30º B.N.cyl. M4000757 2 flute 4mm long 30º B.N.cyl. M4000758 2 flute 5mm long 30º B.N.cyl. M4000759 2 flute 6mm long 30º B.N.cyl. M4000760 2 flute 8mm long 30º B.N.cyl. M4000761 2 flute 10mm long 30º B.N.cyl. M4000762 2 flute 12mm long 30º B.N.cyl. M4000763 2 flute 16mm long 30º B.N.cyl. M4000764 2 flute 20mm long 30º B.N.cyl.

SC420C Cylindrical ball nose

D1: Mill Diameter D2: Shank Diameter L1: Length of cut L2: Overall length

Application:

For full machining recommendations - see pages 236 - 238

D1 Tolerance D2 Tolerance L1 L2 e8 µm h6 µm

��



3.0 -14 -28 6,0 0 -6 10,0 50,0

4.0 -20 -38 6,0 0 -8 12,0 50,0

5.0 -20 -38 6,0 0 -8 14,0 57,0

6.0 -20 -38 6,0 0 -8 16,0 57,0

8.0 -25 -47 8,0 0 -9 20,0 63,0

10.0 -25 -47 10,0 0 -9 22,0 72,0

12.0 -32 -59 12,0 0 -11 25,0 83,0

16.0 -32 -59 16,0 0 -11 32,0 92,0

20.0 -40 -73 20,0 0 -13 38,0 105,0


M4000775 3flute3mmshort30ºcyl.









SC425C Cylindrical

3.0 -14 -28 6,0 0 -6 10,0 50,0

4.0 -20 -38 6,0 0 -8 12,0 50,0

5.0 -20 -38 6,0 0 -8 14,0 57,0

6.0 -20 -38 6,0 0 -8 16,0 57,0

8.0 -25 -47 8,0 0 -9 20,0 63,0

10.0 -25 -47 10,0 0 -9 22,0 72,0

12.0 -32 -59 12,0 0 -11 25,0 83,0

16.0 -32 -59 16,0 0 -11 32,0 92,0

20.0 -40 -73 20,0 0 -13 38,0 105,0


M4000784 3flute3mmshort30ºflat









SC425F Flat

D1:MillDiameterD2:ShankDiameterL1:LengthofcutL2:Overalllength

Application:

D� Tolerance D� Tolerance L� L� e� µm h� µm


��0



2.0 -14 -28 6,0 0 -6 6,0 40,0

3.0 -14 -28 6,0 0 -6 8,0 45,0

4.0 -20 -38 6,0 0 -8 11,0 45,0

5.0 -20 -38 6,0 0 -8 13,0 50,0

6.0 -20 -38 6,0 0 -8 13,0 50,0

8.0 -25 -47 8,0 0 -9 19,0 60,0

10.0 -25 -47 10,0 0 -9 22,0 70,0

12.0 -32 -59 12,0 0 -11 26,0 75,0

16.0 -32 -59 16,0 0 -11 32,0 100,0

20.0 -40 -73 20,0 0 -13 38,0 105,0












SC430C Cylindrical

Application:


2,0 -14 -28 6,0 0 -6 8,0 40,0

3,0 -20 -38 6,0 0 -8 12,0 50,0

4,0 -20 -38 6,0 0 -8 15,0 50,0

5,0 -20 -38 6,0 0 -8 20,0 60,0

6.0 -20 -38 6,0 0 -8 20,0 60,0

8.0 -25 -47 8,0 0 -9 25,0 70,0

10.0 -25 -47 10,0 0 -9 30,0 90,0

12.0 -32 -59 12,0 0 -11 30,0 90,0

16.0 -32 -59 16,0 0 -11 50,0 110,0












4 FLUTE, LONG LENGTH, 30° HELIX


��


4 FLUTE, LONG LENGTH, 30° HELIX, BALL NOSE

2.0 -14 -28 6,0 0 -6 5,0 50,0

3.0 -14 -28 6,0 0 -6 8,0 60,0

4.0 -20 -38 6,0 0 -8 8,0 70,0

5.0 -20 -38 6,0 0 -8 10,0 80,0

6.0 -20 -38 6,0 0 -8 12,0 90,0

8.0 -25 -47 8,0 0 -9 14,0 100,0

10.0 -25 -47 10,0 0 -9 18,0 100,0

12.0 -32 -59 12,0 0 -11 22,0 110,0

16.0 -32 -59 16,0 0 -11 30,0 140,0

20.0 -40 -73 20,0 0 -13 38,0 160,0


M4000825 4flute2mmlong30ºB.N.cyl.










SC440C Cylindrical ball nose


Application:

For full machining recommendations - see pages �� - ��


��


6.0 -20 -38 6,0 0 -8 13,0 57,0

8.0 -25 -47 8,0 0 -9 19,0 63,0

10.0 -25 -47 10,0 0 -9 22,0 72,0

12.0 -32 -59 12,0 0 -11 26,0 83,0

16.0 -32 -59 16,0 0 -11 32,0 92,0

20.0 -40 -73 20,0 0 -13 38,0 104,0








SC445C Cylindrical6,8 FLUTE, LONG LENGTH, 45° HELIX

Application:


6 FLUTE, EXTRA LONG LENGTH, 45° HELIX

6.0 -20 -38 6,0 0 -8 26,0 70,0

8.0 -25 -47 8,0 0 -9 36,0 90,0

10.0 -25 -47 10,0 0 -9 46,0 100,0

12.0 -32 -59 12,0 0 -11 56,0 110,0

16.0 -32 -59 16,0 0 -11 66,0 130,0

20.0 -40 -73 20,0 0 -13 76,0 140,0


M4000857 6flute6mmX-long45ºcyl.









��


6.0 -20 -38 6,0 0 -8 13,0 57,0

8.0 -25 -47 8,0 0 -9 19,0 63,0

10.0 -25 -47 10,0 0 -9 22,0 72,0

12.0 -32 -59 12,0 0 -11 26,0 83,0

16.0 -32 -59 16,0 0 -11 32,0 92,0

20.0 -40 -73 20,0 0 -13 38,0 104,0








SC455C Cylindrical PR

6.0 -20 -38 6,0 0 -8 13,0 57,0

8.0 -25 -47 8,0 0 -9 19,0 63,0

10.0 -25 -47 10,0 0 -9 22,0 72,0

12.0 -32 -59 12,0 0 -11 26,0 83,0

16.0 -32 -59 16,0 0 -11 32,0 92,0

20.0 -40 -73 20,0 0 -13 38,0 104,0


M4000875 6flute6mmlong45ºflat






SC455F Flat


Application:



6,8 FLUTE, LONG LENGTH, 45° HELIX,POSITIVE RAKE ANGLE


��


MULTI-FLUTE, ROUGHING, LONG REACH, 45° HELIX


6.0 -20 -38 6,0 0 -8 16,0 57,0

8.0 -25 -47 8,0 0 -9 16,0 63,0

10.0 -25 -47 10,0 0 -9 22,0 72,0

12.0 -32 -59 12,0 0 -11 26,0 83,0

16.0 -32 -59 16,0 0 -11 32,0 92,0

20.0 -40 -73 20,0 0 -13 38,0 104,0


M4000893 3flute6mmrougher45ºL.R.Cyl.






SC465C Cylindrical

6.0 -20 -38 6,0 0 -8 16,0 57,0

8.0 -25 -47 8,0 0 -9 16,0 63,0

10.0 -25 -47 10,0 0 -9 22,0 72,0

12.0 -32 -59 12,0 0 -11 26,0 83,0

16.0 -32 -59 16,0 0 -11 32,0 92,0

20.0 -40 -73 20,0 0 -13 38,0 104,0


M4000899 3flute6mmrougher45ºL.R.flat






SC465F Flat


Application:



��


Nickel Based Alloys


Material Group Group Material Examples* Brinell Vc [m/min]No hardness min max

XC12150 300

Low Carbon Steel 1S 250 Pb

180 200 270

210 250

250

160

42 CrMo 4180 160 250

Alloy Steel 2 100 Cr 6230

32 NiCrMo 14.5280

120

140 180

320 170

X38 CrMoV 5220 180

High Alloy Steel 3 X210 CrW 12280 140

X90 CrMoV 8320 140

350

140

120

100

90 120

4303 / 304 210

80 100304 L to 250


230 80 100


6316 Ti

-------- 70 90630 (F16PH)

Ferritic Stainless7 430 / 439 / 444 Annealed 80 100

Steel

Martensitic8 410 / 420

Annealed100 140


EN - GJL 200140

250200

Grey Cast Iron 9 EN - GJL 250to 230 160 200

EN - GJL 300

Al99,5Aluminium alloysSi < 4%

13 AlCuMgPb 400 500

AlZnMgCu1,5

EN - GJS 400 210 200

Nodular Cast Iron 10 EN - GJS 600 260 160

EN - GJS 800 310 140

160

140

120

Inconel 6256040

11 Inconel 718

----------------

-------- 40Hastelloy C 60

12TiAl 6 V4

--------

--------

----------------

Aluminium alloysSi 4-8%

13 G/AlSi6Cu4 200 250G/AlSi8Cu3Fe

--------

--------

"Aluminium alloysSi > 8%"

14 G/AlSi12 160 200G/AlSi12CuFe

--------

--------

Magnesium alloys 15 MgMn 2 160 200MgAl9Zn

--------

--------

Copper alloys

16

17

CuZn39Pb2 M558 400 500

200 250

160 200

CuSn6/8

18

CuSn7ZnPb

CuAl19Ni

--------

--------

--------

--------

--------

50 100

T40 40 80

Machining recommendations

Contour - Finishing

Plunge - Slot Contouring

Contour - Slotting

Profiling thin material

Icons

Profiling - Finishing

Slotting

Plunge - Slot

Profiling - Roughing

��


Plunge - Slot Contouring

Machining recommendations

Slotting

contouring

2345

681012

16

20

Profiling

Tool Diameter (mm)

Feed per Tooth Widthof Cut

0.025

min max

Depthof Cut

Feed per Tooth

mm mm

Widthof Cut

min max

Depthof Cut

mm mm2.000.012 1.00

Depthof Cut

mm mmmin max


Tool Diameter (mm)


min max

Depthof Cut

Feed per Tooth

mm mm

Widthof Cut

min max

Depthof Cut

mm mm

Depthof Cut

mm mmmin max


Tool Diameter (mm)


min max

Depthof Cut

Feed per Tooth

mm mm

Widthof Cut

min max

Depthof Cut

mm mm

Depthof Cut

mm mmmin max


0.025 0.040 1.50 3.000.025 0.040 2.00 4.00

0.040 0.065 2.50 5.00

0.040 0.075 3.00 6.00

0.050 0.100 4.00 8.00

0.050 0.100 5.00 10.00

0.065 0.120 6.00 12.000.080 0.130 8.00 16.00

0.090 0.160 10.00 20.00

2345

681012

16

20

2345

681012

16

20

0.040 2.000.025 0.500.050 3.000.040 0.75

0.050 4.000.040 1.00

0.070 5.000.050 1.250.090 6.000.050 1.500.120 8.000.065 2.000.120 10.000.065 2.50

0.130 12.000.065 3.000.140 16.000.075 4.00

0.170 20.000.090 5.00

0.025 2.000.006 0.250.040 3.000.012 0.38

0.048 4.000.016 0.50

0.050 5.000.020 0.630.060 6.000.025 0.750.075 8.000.030 1.000.080 10.000.032 1.25

0.100 12.000.040 1.500.120 16.000.048 2.00

0.150 20.000.050 2.50

0.0200.0120.0300.016

0.0320.0200.0400.0200.0480.0240.0500.0320.0550.0350.0600.0400.0750.045

0.0800.048

0.040 2.000.016 2.000.048 3.000.024 3.00

0.050 4.000.032 4.00

0.070 5.000.040 5.000.085 6.000.048 6.000.100 8.000.050 8.000.110 10.000.060 10.000.120 12.000.065 12.000.130 16.000.080 16.00

0.160 20.000.090 20.00

0.045 2.000.032 0.500.050 3.000.036 0.75

0.055 4.000.040 1.00

0.065 5.000.045 1.250.070 6.000.050 1.500.080 8.000.060 2.000.100 10.000.070 2.50

0.120 12.000.080 3.000.150 16.000.100 4.00

0.200 20.000.120 5.00

0.045 2.000.032 0.250.050 3.000.036 0.38

0.055 4.000.040 0.50

0.065 5.000.045 0.630.070 6.000.050 0.750.080 8.000.060 1.000.100 10.000.070 1.250.120 12.000.080 1.500.150 16.000.100 2.00

0.200 20.000.120 2.50

2.002.003.003.00

4.004.00

5.005.006.006.008.008.00

10.0010.0012.0012.0016.0016.00

20.0020.00

Finishing Semi Finishing Roughing



As a simple starting point, we recommend to use the following cutting conditions:

��

Solid Carbide machining recommendations

Drill selection recommendation, according to application: 1. Profiling - finishing cut :use 4 or 6 flute mill.

2. Slotting - semi-roughing cut and high feed rates: use 3 flute mill for regular chip

removal use a 2 flute mill for long chips (soft material)

use Roughing mill for maximum chip removal

3. Plunge - slot cut: use 3 flute mill for higher feed rate and 2 flute mill for soft

material.

4. Profiling - roughing cut: use Roughing mill for rapid material removal and higher

feed rates.

5. Contour- finishing cut: use 2 or 4 ball nose mill.

6. Slot-contouring cut: use 2 flute ball nose for maximum chip removal.

use 4 flute ball nose for finishing.

7. For profiling of thin material s: use 6 flute mill.

8. For Aluminum machining: Finishing cut - use 6 or 8 positive rake flute mill

slotting cut - use 2 flute short mill.

Machining Tips: 1. Climb milling is preferred with CNC machines.

2. Use ramping down operation to avoid vibrations.

3. When opening a pocket, helical interpolation operation is preferred.

Formulasrpm = sfm * 3.82 / tool diameter rpm = (m/min * 1000) / (3.14 * tool diameter) feed per min = feed per tooth * number of teeth * rpm

��

terialReferenceList

��

Materialgroup number AFNOR BS UNI JIS

1.0036 - - FE 37BFU -1 1.0401 CC12 080M15 C15 / C16 S15C

1.0501 C35 CC35 060A35 C35 S35C / S35CM 10351111111111111111111111111

Low Carbon Steel

Alloy Steel

1.1157

1.1158 XC 25 070M25-

C25 S25C / S28C-

1

1.1166 - SMn 433H

1.1141 XC 12 080 M15 C16

1.1170 20 M 5 (150 M8) C 28 Mn

1.1173 35 M 5 (150 M28) - SMn 433H / SCMn 2SCMn 1

1.1181 XC 32 080 A35 C 35 S 35C1.1183 XC 38TS 080 A35

-

XC 45 080 M46 / 060 A47C36 / C38 S35C / S35CM

- -

S45C / S48C / S45CM

1.1203 XC 55 060 A57 / 070 M55 C50

1.1121 XC 10 040 A10 2 C 10 S9 CK / S 10 C

40 M 5 150 M36 -

20 Mn 7 SMnC 420S15 / S15CK

1.0402 CC20 050A20 C20 / C21 S20C / S22C

1.0503 CC45 080M46230M07

C45 S45C / S45CM1.0715 S250 CF 9 SMn 28 SUM22

-S 250Pb CF 9 SMnPb 28 SUM22L/SUM23L-- - --- - -

-- - --- - --- - --- - --- - -

1.07181.07221.07251.07261.07561.0761.07621.07631.0764 - - - -1.0765 - - - -

1.1133 20 M 5 120 M19

1.1191

1

1.0050 FE 50

C45

SS50 / SS4901.0060

2

1.0070 FE 70-2FE 60-2

FE70-22

1.05352

1.0601 C60C55

S58CS55C / S55CM

22

1.1213 C53 S50C / S50CM2

1.12212

1.1525 C 80 KUC60

-2

1.15452

1.1563 C 120 KUC 100 KU2

1.15732

1.1625

SM570 / SM58

S55C / S55CM

SK3 / SUP4

-2

1.17502

1.2330 35 CrMo 4-

-

CC55-

080A62

XC 48TS 060A52

C 90 E2UXC 60

C 120 E3U

- -

C 140 KU

060 A62

C 140 E3U

-

-

-

C 105 E2U

BW 1B

070M55

1.5711 38 NC 6

1.54232

1.562216 Mo5

SL9N5903140

22

1.5713 - 3115SNC 415(H)

216 N 6-

10 NC 61.5732

2

1.5752 14 NiCr14 3415 / 331022222

SB 450M / SB 480M

14 NC 11 -

-

BW 1A-2

1.2332 - - 40 CrMo 4 -22

1.5415 1501-240

S58C / S60CM

SK2

SK5 / SK6

-

14 Ni 6

12 NC 15

708 A37 / (BP20)34 CD 4

15 D 31503-245-420

-

16 NiCr 11SNC 815(H)655 M13

-

-

--

-

-

-

-

16 Mo3 KW STBA12 / STFA12

1.5919 - - - -1.7003 38 Cr 2 38 C 2 120 M36 38 Cr 2 -1.7006 42 C 2 - 45 Cr 2 -

1020

AISI/SAE

-1015

10251536

10151035 / 1041

1330

1306 / 13301035 / 10381035

1055

1010

1045121312L3---------

1022 / 1518

1045

-

-10551060

10501060 / 1064

W 108W110

-W1W1

-

4520

-3415

4135 / P204142

ASTM A350LF5

W 112

-

ASTM A204 GrA

3115

5045 / 5046

DIN

US137-3C15

40 Mn 4C25E (CK 25)35 Mn 5

Ck 15

28 Mn 6

30 Mn 5C35E (CK 35)Cf 35

C55E (CK 55)

Ck 10

C22

C459 SMn 289 SMnPb 2810 SPb 2015 SMn 1335 S 2035 SPb 2038 SMn 2844 SMn 2844 SMnPb 2836 SMn 1436 SMnPb 14

20 Mn 5

C45E (Ck 45)

St 50-2St 60-2St 70-2C55C60

Cf 53C60E (CK 60)

C 80 W1C 105 W1C 125 WC 135 WC 80 W2C 75 W35 CrMo 4

40 NiCr 6

16 Mo 514 Ni 6

13 NiCr 614 NiCr 10

47 CrMo 415 Mo 3

15 CrNi 6

46 Cr 2

Lamina Material Groups Lamina Material Groups

��0


222222222222222222222

333

Alloy Steel

High Alloy Steel

1.7337

1.7361 30 CD 12 722 M24(BL3)

32 CrMo 12 --

1

1.2067 Y 100 C 6 SUJ 2

1.7335 15 CD 3.5 / 4.5 1502 620 540 14 CrMo 3

1.2080 Z200 C 12 BD3 X205 Cr 12KU

1.2210 100 C 3 - 107 CrV3 KU -SKD 1

1.2241 - - - -

1.2311 - -

-

Z38 CDV 5 BH1135 CrMo 8 KU -

Z40 CDV 5 BH13SKD 6

1.2436 Z210 CW 12 1 - X215 CrW 12 1 KU

1.7262 12 CD 4 - - SCM 415(H)

15 CD 4 5 - 18 CrMo 4 5 KW

- SCM 421 / SCM 420HSFVAF12

1.7033 32 C 4 530 A32530 M40

34 CR 4 (KB) SCr 430(H)1.7035 42 C 4 - SCr 440(H)(M)

530 A4041 C 4 41 Cr 4 SCr 440-20 MC 5 20 MnCr 5 SMnC 420H527 A6055 C 3 55 Cr 3 SUP9(A)

708 A2525 CD 4 25 CrMo 4(KB) SCM 420/SCM 430

708 A3735 CD 4 35 CrMo 4 SCCr M3/SCM 435H

708 M4042 CD 4TS 41 CrMo 4 SCM 440708 M4042 CD 4 42 CrMo 4 SCM 440(H) / SNB 7

-- - -

1.70451.71471.71761.72181.72201.72231.72251.72271.7228 50 CD 4 708 A47 - SCM 445(H)1.7242 - - 18 CrMo 4 SCM 418(H)

1.7264 18 CD 4 -

1.2343

31.2344 X40 CrMoV 511KU

X37 CrMoV51 KUSKD 61

31.2363

31.2365 30 CrMoV 12 27KU

X100 CrMoV 5 1KU-

3

1.2379

31.2419 107 WCr 5 KU

X155 CrVMo121 KUSKS 31 / SKS 2 / SKS 3

SKD 233

1.2510 95 MnWCr 5KU BO 1

31.2542

31.2550 58 WCr 9 KU

45 WCrV 8 KU-

31.2567

31.2581 X30 WCrV 9 3 KU

X30 WCrV 5 3 KU

3

1.2601

31.2606

SKD 12

SKD 11

SKD 4

-

31.2713

31.2721 -

-

BH10

105 WC 13Z160 CDV 12

-

90 MWCV 5 BO1

55 WC 2045 WCV 20

Z30 WCV 9

Z100 CDV 5 BA2

X165 CrMoW 12 KU

BS1

-

32 DCV 12 28

BS1

Z35 CWDV 5

Z32 WCV 5

BH12

BD2

1.3207 Z130 WKCDV 10 10 4 4 3

1.2885

31.3202

--SKH 57

33

1.3243 HS 6-5-2-5 SKH 55-

3

--

Z90 KCV 6 5 5 4 21.3246

31.3247

333

-

Z110 WKCDV 7 5 4 4 2 -

33

-

BH 244/555 NCDV 7

31.2762 - - - -

31.2842 BO2

-

SKD 5

SKD 62

-

HS12-1-5-5

Z110 DKCWV 9 8 4 2 1

--

90 MV 8BH 10A

X35 CrMoW 05 KU

HS 7-4-2-5SKH 59BM42

SKT 4

BH21

BT15HS10-4-3-10

HS2-9-1-8

-

BT42

334

88 MnV 8 KU -

3

1.3249 - (BM34) - -1.3343 Z 85 WDCV 6 5 4 2 BM2 HS 6-5-2-5 SKH 51

1.3346 Z85 DCWV 8 4 2 1 BM1 - -1.3344 Z130 WDCV 6 5 4 4 - - SKH 52 / SKH 53

1.3401 Z120 M 12 BW10-

- -1.3501 100 C 2 - -

2 1.7015

DIN

16 CrMo 4 432 CrMo 12102 Cr 6

13 CrMo 4 4

X210 Cr 12

115 CrV 351 CrV 4

40 CrMnMo 7

X210 CrW 12

15 CrMo 5

34 Cr 441 Cr 441 Cr 420 MnCr 555 Cr 325 CrMo 434 CrMo 441 CrMo 442 CrMo 442 CrMoS 450 CrMo 416 CrMo 4

20 CrMo 5

X38 CrMoV 5 1X40 CrMoV 5 1X100 CrMoV 5 1X32 CrMoV 3 3X155 CrVMo 12 1105 WCr 6

100 MnCrW 445 WCrV 7

60 WCrV 730 WCrV 17 2~X30 WCrV 9 3X165 CrMoV 12X37 CrMoW 5 155 NiCrMoV 650 NiCr 13

S 10-4-3-10

X32 CrMoCoV 3 3 3S 12-1-4-5

S 6-5-2-5S 7-4-2-5S 2-10-1-8

75 CrMoNiW 6 790 MnCrV 8

S 2-9-8S 6-5-2

S 2-9-1S 6-5-3

G-X120 Mn 12100 Cr 2

15 Cr 315 C 2 523 M15 - SCr 415(H)

AISI/SAE

-L1 / L3

A182 A387 Gr.12A 387 Gr 12 CI2

D3

L2-

-

-

-

51325140514051205155 / 516041304137 / 41354140 / 41424140 / 4142-4150-

-

H 11H 13

H10D2-

O1S1

S1-

-H 12L6

A2

(H10A)

-M 41M 42

--

T15

H 21

-

O2

M33 / M34M2

H41 / M1M2 Class 2

A128 75E 50100

5015 / 5115

Lamina Material Groups

��


33

3333333333333333333333333

High Alloy Steel

1.6546

1.6562 - 817 M40817 A37 / 818 M40

40 NiCrMo 7(KB) -SNCM 240

1

1.6565 - SNCM 439

1.6523 20 NCD 2 805 M20 20 NiCrMo 2

1.6580 30 CND 8 823 M30 30 NiCrMo 8

1.6582 35 NCD 6 817 M40 35 NiCrMo 6(KB) SNCM 447SNCM 431

1.6587 18 NCD 6 820 A16 - -1.6657 16 NCD 13 832 M13

-

35 NCD 14 -15 NiCrMo 13 -

35 NCD 16 835 M30-

1.7238 - - -

1.5864 - - - -

- 311-TYPE 7 40 NiCrMo 2(KB)

38 NiCrMo 4(KB) -SNCM 220(H)

-Z100 CD 17 - SUS 440C

349 S54Z53 CMN 21 9 Az X53 CrMnNiN 21 9 SUH 35 / SUH 36-- X20 CrMoV 12 1 -1502-502-650- X10 Ni 9 SL 9N53 / 60-Z18 N 5 - SL 5N 590640 A3535 NC 6 - SNC 236

1.41251.48711.49221.56621.56801.57101.5736 30 NC 11 - - SNC 631(H)1.5755 18 NC 13 653 M 31 - SNC 836

1.6511 40 NCD 3 817 M37

1.6746

3

1.6747 --

-

3

1.6773

3

1.7102 --

-

3

1.7108

3

1.7131 16 MnCr 560 SiCr 8

--

33

1.7362 16 CrMo 20 5 SFVAF5A / SFVAF5B

3

1.7380

3

1.7561 -12 CrMo 9 10

-

3

1.7701

3

1.7715 -51 CrMoV 4

3

1.7733

3

1.7755

-

-

-

-

3

1.80701.8159 50 CrV 4

35 NiCr 9

-

16 MC 560 SC 7

527 M17 / 590 H17

Z 10 CD 5 5 3606-625

-10 CD 9 10

-

- -

21 CrMoV 5 11

3606-622

20 CDV 6

54 SC 6

-

-

51 CDV 4

-

-

1.8523 -

1.8515

4

1.851930 CrMo 12

--

44

1.8550 - -

SUS 416

4

-30 DC 12

30 CAD 6 12

1.4005

4

1.4104

444

-

Z11 CF 13 416 S21

44

-

--

1.8507 30 CAD 6.12 - 34 CrAlMo 7 -

4

1.8509 905 M39

SFVAF22A:B / SCMV4

-

-

-

-

Z13 CF 17

735 A5151 CV 4

40 CAD 6 12722 M24

-

X12 CrS 13SUS 430F441 S29

-

1503-660-440

-36 CrMoV 12

X10 CrS 17

SUP 10

897 M39

905 M31

41 CrAIMo 7 SACM 645 / SACM 1

Austentic stainless Steel

1.4113 Z8 CD 17 01 434 S17 X8 CrMo 17 SUS 4341.4301 Z6 CN 18 9 304 S15 / LW21 / LWCF X5 CrNi 18 10 SUS 304

1.4305 Z8 CNF 18 9 303 S22 / 303 S31 X10 CrNiS 18 9 SUS 3031.4303 Z5 CN 18 11FF 305 S17 / 305 S19 X7 CrNi 18 10 SUS 305 / SUS 305J1

1.4306 Z2 CN 18 9 304 S11 / LW20 / LWCF

304 C15 / (LT196)X3 CrNi 18 11 SUS 304L / SCS19

1.4308 Z6 CN 18 10M - SCS 13301 S21 / 301 S22Z12 CN 17 8 X12 CrNi 18 07 SUS 301304 S61Z2 CN 18 7 Az X2 CrNiN 18 10 SUS 304LN302 C25 / ANC3AZ10 CN18 9M - SCS 12 / SCS 13A

1.43101.43111.4312

534 A99100 C 6 100 Cr 6 SUJ2 / SUJ4452 C11- - -

AISI/SAE

E 43404340 / 9850

86208740

-

4340 / 4337-9310

-

-

440CEV8-A3532515 251731353435-

9840 4340

--

40192625115

-A 182 F11/A 387 Gr.22

--

---

-

-

-

416430F

6145 / 6150A 355 CI.D

-

-

-

A 355 Cl.A / E71400

434304 / 304H

303305 / 308

304LCF8301304LN-

52100-

1.35051.4086

DIN

40 NiCrMo 2240 NiCrMo 8 440 NiCrMo 6

21 NiCrMo 2

30 CrNiMo 8

35 CrNiMo 617 CrNiMo 614 NiCrMo 34

49 CrMo 4

35 NiCr 18

X105 CrMo 17X53 CrMnNiN 21 9X20 CrMoV 12 1X8 Ni 9X12 Ni 536 NiCr 636 NiCr 1031 NiCr 14

36 CrNiMo 4

32 NICrMo 14 530 NiCrMo 16 636 NiCrMo 1654 SiCr 660 SiCr 716 MnCr 5

12 CrMo 19 510 CrMo 9 10

42 CrV 651 CrMoV 414 MoV 6 324 CrMoV 5 5GS-45 CrMoV 10 421 CrMoV 5 1150 CrV 4

39 CrMoV 13 9

31 CrMo 1231 CrMoV 9

34 CrAlNi 7

X12 CrS 13X14 CrMoS 17

34 CrAlMo 541 CrAIMo 7

x6 CrMoS 17 1X5 CrNi 18 9

X8 CrNiS18 9X4 CrNi 18 12

X2 CrNi 18 9G-X5 CrNi 19 10X10 CrNi 18 8X2 CrNiN 18 10G-X10 CrNi 18 8

100 Cr 6G-X120 Cr 29


��


444

555555555

66666666666666



Austentic and duplex stainless Steel

1.4438

1.4449 - 317 S16

431 S29

X5 CrNiMo 18 15 SUS 317SUS 317L

1.4057 Z15 CN 16 2 SUS 431

1.4436 Z6 CND 18 12 3 316 S19 / 316 S33 / LW X5 CrNiMo 17 13

1.4313 Z4 CND 13 4 425 C11 -

1.4319 - 301 S26 / 302 S26 - SUS 302SCS 5

1.434 - - - -1.4362 Z2 CN 23 04 AZ -

X16 CrNi 16

- -- -

- --

1.4511 Z4 CNb 17 - X6 CrNb 17

1.4429 Z2 CND 17 12 Az 316 S63 X2 CrNiMoN 17 13 (SUS 316LN)

Z2 CND 19 15 4 317 S12 X2 CrNiMo 18 16

X2 CrNiMo 17 13 SUS 316LSUS 316

304 Cu- X3 CrNiCu 18.9.4 XM7301 S81Z CNA 17 7 - -303 Cu- X8 CrNiCuS 18.9.2 SUS 303Cu

316 S13 / 316 S31Z6 CND 17 11 2 X5 CrNiMo 17 12 SUS 316316 S11 / 316 S13Z2 CND 17 12 2 X2 CrNiMo 17 12 SUS 316L

1.45671.45681.4570

1.44011.44041.4406 Z3 CND 17 11 Az 316 S61 / 316 S63 X2 CrNiMoN 17 12 SUS 316LN1.4408 - 316 C16 / (LT196) / A - SCS14

1.4435 Z2 CND 17 12 3 316 S11 / 316 S31

1.4410

6

1.4417 --

-

6

1.4460

6

1.4462 --

SUS 329J3L

6

1.4500

6

1.4510 X6 CrTi 17-

SUS 430LXSUS 430LX

66

1.4521 - SUS 444

6

1.4539

6

1.4541 X6 CrNiTi 18 11-

SUS 321

6

1.4542

6

1.4546 X6 CrNiNb 18 11-

6

1.455

6

1.4552

SUS 329J1

-

SUS 630 / SCS24

SUS 347

6

1.4558

6

1.4562 --

318 S13

Z4 CT 1723 NCDU 25 20M

-

- -

Z6 CNT 18 10Z2 NCDU 25 20

-

Z5 CND 27 5 Az -

X6 CrNiNb 18 11

-

Z6 CNNb 18 10

Z23CND 22 5 3 Az

321 S12 / 321 S51

Z4 CNNb 18 10M

Z7 CNU 17 4

347 C17

-

1.4583 -

1.4580

6

1.4581X6 CrNiMoNb17 12

--

66

1.4585 X6 CrNiMoSi 17 12 -SUH 4

6

Z4 CNDNb 18 12MZ6 CNDNb 17 12

-1.4747

6

1.4821

66

-

Z80 CNS 20 2 443 S65

347 S20 / 347 S31

NA15-

6

1.4563 Z 1 NCDU 31 27 - - -

6

1.4571 320 S18 / 320 S31

-

-

SCS 21

-

G-X 6 CrNiMoNb 20 11

Z20 CNS 25 04

--

Z6 CNDT 17 12318 S17

-

X80 CrNiSi 20--

-

347 SD31

318 C17 / ANC4CX6 CrNiMoNb 17 13

-

-

-

-

X6 CrNiMoTi 17 12 SUS 316Ti

6

1.4823 - - - -1.4828 Z17 CNS 20 12 309 S24 X16 CrNi 23 14 SUH 309

1.4837 - 309 C30 G-X40 CrNiSi 25 12 SCH 17 / SCH 13A1.4833 Z15 CN 24 13 309 S13 X6 CrNi 23 14 -

1.4841 Z15 CNS 25 20 314 S25310 S24

X15 CrNiSi 25 20 SUH 3101.4845 Z12 CN 25 20 X6 CrNi 25 20 SUS 310

310 C40 / 310 C45- G-X40 CrNiSi 26 20 SCH 21 / SCH 22NA17Z12 NCS 33 16 - SUH 330330 C11 / 330 C40- G-X50 NiCrSi 39 19 SCH 15 / SCH 16

-Z45 CNW 18 9 X45 CrNiW 18 9 SUH 31

AISI/SAE

317

431

316317L

-

302-S32304

-

316LN

304Cu-303Cu

316316L316LNCF-8M

316L

-S31500

--430 Ti / 439

443 / 444904L / UNS N08904

321630

347 / 348-N 08800

329

(316 Cb)

-HNV6-

N 08031N 08028

-

348

318

316Ti

-309

-309S

310 / 314310HK330--

1.48481.48641.48651.4873

DIN

X2 CrNiMo 18 15 4X3 CrNiMo 18 12 3

X17 CrNi 16.2

X3 CrNiMo 17 13 3

X3 CrNiMo 13 4

X3 CrNiN 17 8G-X40 CrNi 27 4X2 CrNiN 23 4

X3 CrNb 17

X2 CrNiMoN 17 13 3

X3 CrNiCu 18.9.4X7 CrNiAl 17 7X8 CrNiCuS 18.9.2

X2 CrNiMo 17 12 2X2 CrNiMo 17 12 2X2 CrNiMoN 17 11 2

G-X 5 CrNiMo 19 11 2

X2 CrNiMo 18 14 3

X2 CrNiMoN 25 7 4X2 CrNiMoSi 19 5X8 CrNiMoN 27 5 2X2 CrNiMoN 22 5 3G-X7 NiCrMoCuNb 25 20

X3 CrTi 17

X2 CrMoTi 18 2X1 NiCrMoCuN 25 20 3

X10 CrNiMoTi 18 10X5 CrNiCuNb 16 4X5 CrNiNb 18 10X6 CrNiNb 18 10G-X5 CrNiNb 19 11X2 NiCrAITi 32 20X1 NiCrMoCu 32 28 7

X10 CrNiMoNb 18 12

X6 CrNiMoNb 17 12 2

G-X5 CrNiMoNb 19 11 2

G-X7 CrNiMoCuNb 18 18

X80 CrNiSi 20X20 CrNiSi 25 4

X1 NiCrMoCuN 31 27 4

X6 CrNiMoTi 17 12 2

G-X40 CrNiSi 27 4X15 CrNiSi 20 12

G-X40 CrNiSi 25 12X12 CrNi 22.13

X15 CrNiSi 25 20X12 CrNi 25 21G-X40 CrNiSi 25 20X 12 NiCrSi 35 16G-X40 NiCrSi 38 18X45 CrNiW 18 9


��



66

7777777

8888888888888

9

6.Austentic and duplex stainless Steel 7.Ferritic stainless Steel 8.Martensitic stainless Steel Austentic and duplex stainless Steel

Martensitic stainless Steel

Ferritic stainless Steel

1.4016

1.4742 Z12 CAS 18 430 S15-

X8 Cr 17 SUH 21SUS 430

1

1.4762 Z10 CAS 24 (SUH 446)

1.4008 Z12 CN 13M 410 C21 GX12 Cr 13

1.2083 Z40 C 14 - -

1.4006 Z10 C 13 410 S21 / 410 C21 X12 Cr 13 SUS 410SUS 420J2

1.4011 - ANC1A - -1.4021 Z20 C 13 420 S37

X16 Cr 26

Z15 C 13 420 S29X20 Cr 13 SUS 420J1

Z20 C 13M 420 C24 / 420 C29SUS 410J1

1.4718 Z45 CS 9 401 S45 X45 CrSi 8

1.4001 Z8 C 13FF 403 S17 X6 Cr 13 SUS 403 / SUS 401S

Z8 C 17 430 S17 / 430 S18 X8 Cr 17

X6 CrAI 13 SUS 405-

-- - -1.49581.4977 Z42 CNKDWNb - - -

1.4000 Z6 C 13 403 S17 X6Cr 13 SUS 403 / SUS 410S

1.4002 Z8 CA 12 405 S17

1.4024

9

1.4027 --

SCS 2

9

1.4028

9

1.4031 X40 Cr 13(G) X 30 Cr 13

SUS 420J2

9

1.4034

9

1.4531 -X40 Cr 14

SUH 3SUH 1

9

10

1.4720 - -

10

1.4724

10

0.6010 G 10

X10 CrAl 12

FC 100

10

0.6015

10

0.6020 G 20G 15

10

0.6025

10

0.6030

SUS 420J2

-

FC 150

FC 250

10

0.6035

10

0.6040 -G 35

-

Z40 CSD 10Z44 C 14

-

- -

Ft 10D

Z10 C 13

Ft 20D

Z30 C 13 420 S45

G 25

-

Ft 25D

Z40 C 14

-

Ft 30D

Ft 15D

GRADE 300

(420 S45)

0.7060 FCS 600-3

0.7043

10

0.7050-

FCD 500FCD 600

1010

0.7070 GGG 70 FCD 700-

FCS 500-7FCS 370-17

FCS 700-20.80350.8040

-

MB35-7 W340/3

GRADE 260

GRADE 350Ft 35D

10

0.7033 - - - -

10

0.7040 SNG420/12

SUS 405

FC 200

FC 300

GRADE 150

GGG 50

MB40-10

GRADE 400Ft 40D

FCS 400-12SNG370/17

G 30

--W410/4

FC 350

GRADE 220

SNG500/7GGG 60

GMB40

-

SNG600/3

SNG700/2

GGG 40 FCD 400

10

Gray cast Iron

Nodular cast Iron

0.8045 - - GMB45 -0.8055 - - - -

0.8135 MN35-10 B340/12 - FCMW 3300.8065 - - - -

0.8145 - P440/7PS10/4

- FCMW 3700.8155 MP50-5 - FCMP 490

P570/3MP60-3 - FCMP 5400.8165

666

NA15(H)Z10 NC 32 21 - NCF 800(TP)321 S51Z6 CNT 18 10 (X6 CrNiTi 18 11) SUS 321-Z50 CMNNb 21 9 - -

AISI/SAE

--446

-430

420

410CA-15420

HNV3

403 / 401S / 429

--

403 / 410S / 429

405

410-

---

-405

CLASS 20CLASS 25

CLASS 35CLASS 45CLASS 50

420F

-

1000-70-03--

CLASS 55

-

80-55-06

CLASS 30

-

60-40-18

--

32510-

400105000570003

B163321-

1.48761.48781.4882

DIN

X8 Cr 17X10 CrAl 18X10 CrAl 24

G-X 7 CrNiMo 12 1

X42 Cr 13

X12 Cr 13G-X 12 Cr 12X20 Cr 13

X45 CrSi 9 3

X7 Cr 14

X5 NiCrAITi 31 20X40 CoCrNi 20 20

X6 Cr 13

X6 CrAI 13

X15 Cr 13G-X20 Cr 14X30 Cr 13X39 Cr 13X46 Cr 13X40 CrSiMo 10 2

X20 CrMo13X10 CrAl 13

EN-GJL 100 / GG 10

EN-GJL 150 / GG 15

EN-GJL 200 / GG 20EN-GJL 250 / GG 25

EN-GJL 300 / GG 30

EN-GJL 350 / GG 35

EN-GJL 400 / GG 40

EN-GJS 6007/GGG 60

EN-GJS400-15/GGG 40.3

EN-GJS 500/GGG 50

EN-GJS 700/GGG 70GTW-35GTW-40

EN-GJS 350/GGG 35.3

EN-GJS 400/GGG 40

GTW-45GTW-55

GTS-35GTW-65

GTS-45GTS-55GTS-65

X10 NiCrAlTi 32 20X12 CrNiTi 18 9X50 CrMnNiNbN 21 9

��



10

111111111111111111111111

12121212121212

121212

Nodular cast Iron

Nickel based Alloys

Titanium based Alloys

Cobalt based Alloys

2.4858

3.7025 - 2TA1-

- -

Incoloy 825

3.7115 - -

2.4856 NC 22 FeDNb NA21 -

3.7124 - 2TA21-24 -

3.7145 - - - --

3.7165 TA 6 V TA 10-13; TA28 - -3.7175 - -

-

- TA 45-51; TA 57- -

- --

---- Stellite 12 - -

2.4694 - - - Inconel 751

NC 21 FeDU NA16 -

- Hastelloy CInconel 625

2.4669 NC 15 TNb A - - Inconel X-7502.4685 - - - Hastelloy B

2.4810 - -

3.71853.7195 -

--

3.72253.7235 -

--

------

--

--

-

-

-

Stellite 7Stellite 6

-

- TP1-

-

Bronze

Aluminium with low Silicon

Aluminium with high Silicon

- -Stellite F ------

2.0966

2.10522.10902.1176

3.12553.13253.16453.2153

3.3355

3.25813.2583

3.3535

3.2315

3.2573

--

-

-- -

-

--

-CuAl9 Ni5 Fe3 M1

U PB8

-

CA 104

A-U4SG

1400 PB2

A-U4G

U-E7 Z5 Pb4

-

-

--

-- -

--

A-G3M

-

-

-A-U4Pb

A-SGM0,7 - - -

-

-

-

-

BS 1400

-

--

--

--

1400 LB2

-

-

-

-

-

- -

13

131313

141414

14

151515

22

141414

P690/2M870-2 - -

NA13NU 30 - Monel 400

NA18ND 30 AT - Monel K-500-- - Hastelloy C-4HR 5, 203-4NC 20 T - Nimonic 75-NC 30 Fe - Inconel 690

0.8170

2.43602.43752.46102.46302.4642

-NC 19 Fe Nb - Inconel 718

AISI/SAE

R 50250 / Titan Grade 2-

Inconel 625Incoloy 825

-

R 54620R 56400 / Titan Grade 5

-

VF7

Inconel 751

Inconel X-750Hastelloy B

Hastelloy C

--

Titan Grade 7

VF2-

R 52250 / Titan Grade 1

-

CDA / C63000

CDA / C 91700CDA / C 93200

---

-

-

--

-

CDA / C 94400

-

-

90001

Monel 400Monel K-500Hastelloy C-4Nimonic 75Inconel 690Inconel 7182.4668

DIN

NiCr 21 Mo

Ti 1TiAI 5 Sn 2

NiCr 22Mo 9Nb

TiCu 2

TiA I6 Sn 2 Zr 4 Mo 2 S

TiAI 6 V 4TiAI 6 V 6 Sn 2

Stellite 12

NiCr 16 Fe 7 TiAI

NiCr 15 Fe7TiAIG-NiMo 28

G-NiMo 30

TiAI 4 Mo 4 Sn 2TiAI 3 V 2.5TI-35A 0.2PDTi-50A 0.2PD

Stellite 6Stellite 7

Stellite F

CuAl10 Ni5 Fe4

CuSn12 NiCuSn7 ZNPbCuPb10 SN

AlCuSiMnAlCuMg 1AlCuMgPbG-AlSi7 Cu3

AlMg5

G-AlSi12G-AlSi12 Cu

AlMg 3

AlMgSi 1

G-AlSi9

GTS-70

NiCu 30 FeNiCu 30 AINiMo 16Cr 16TiNiCr 20 TiNiCr 29 FeNiCr 19 FeNbMo

��

Insert reference tableLookupyourexistinginsertdesignationintheleftcolumn-thecompatibleLaminainsertisshownintheright

column.LaminaMillinggradeLT-30willreplacethegradeoftheinsertbeingused.

AReference Insert Lamina Insert Reference Insert Lamina Insert

APCR 1003 PDFR-PAPCT 1003 PDR-HMAPCT 160408FRAPET 100 305ERAPET 100 308ERAPET 160404 HSAPET 160408ERAPET 160408HS APET 160408TRAPEX 1604 PDFRAPEX 160408FR-E07APEX 160408FR-E08APFT 1604 PDRAPFT 1604 PDTRAPFT 1604PDR-M12APFT 1604PDTR-D15APFT 1604PDTR-E08APFW 1604 PDERAPFW 1604 PDTRAPHT 1604 PDERAPHT 1604 PDFRAPHT 1604 PDTRAPHW 100304 PDERAPHW 100308 PDERAPHW 1604 PDERAPHW 1604 PDSRAPHW 160408 PDERAPKR 1003 PDR-HMAPKT 100 304ERAPKT 100 305ERAPKT 1003 PDERAPKT 1003 PDFRAPKT 1003PDRBAPKT 1003 PDR-HMAPKT 1003 PDR-HM90APKT 1003 PDRJAPKT 1003 PDTR-76APKT 1003 PDTR-RMAPKT 100308 PDTR-RMAPKT 1003PDTR-8MAPKT 1604 PDERAPKT 1604 PDER-M61APKT 1604 PDRBAPKT 1604 PDR-HMAPKT 1604 PDTRAPKT 160404R

APKT 160408EAPKT 160408RAPKT 160408TR-D15APKT 1604PDTR-M14APKT 1604PDTR-ME14APKX 1604PDR-ME11APKX 1604PDR-ME12APMT 1604 PDERAPMT 160408-MAPMW 1604 PDTRAPMX 160408TR-M14APMX 160408TR-ME11APPT 160408 PDER GDAPPT 160408 PDSR GD

HM90 APCR 100304 PDFRDPHM90 APCR 100304 PDFR-PHM90 APKT 1003 PDRHM90 APKT 1003 PDTR-8MHM90 APKT 100304 PDR

ODET 0605 APENODMT 0605 APENODMW 060508 ODMW 060508TODPT 060508 ENGPWODPW 060508 ENGNOFCN 0704 TN-EMROFCN 0704 TN-MROFCR 0704 TN-EMLOFCT 05T3 AFFN-POFCT 05T3 TN-EMOFCT 05T3 TN-MOFEN 070405TN-D18OFER 070405N-E07OFER 070405N-M10OFER 070405TN-M16OFER 070405TN-ME10OFER 070405TN-ME15OFET 070405TN-M16OFET 070405TN-ME10OFET 070405TN-ME15OFEX 05T305N-E04OFEX 05T305N-M05OFEX 05T305TN-D09

O

APLX 1003 PDTRAPLX 1003 PDTRAPKT 1604 PDTRAPLX 1003 PDTRAPLX 100308 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPLX 1003 PDTRAPLX 100308 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 100308 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTR

APKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTRAPMT 1604 PDTRAPKT 1604 PDTRAPKT 1604 PDTR

APLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTRAPLX 1003 PDTR

ODMT 060508 TNODMT 060508 TNODMW 060508 TNODMW 060508 TNODMT 060508 TNODMW 060508 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFMT 05T305 TROFMT 05T305 TROFMT 05T305 TROFER 070405 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFER 070405 TNOFMT 070405 TROFMT 070405 TROFMT 070405 TROFMT 05T305 TROFMT 05T305 TROFMT 05T305 TR

H

��

SEET 1204 AFERSEEX 1203AFTN-M13SEHN 1203 AFENSEHN 1204 AFENSEHN1504 AFSNSEHT 1204 AFNSEKN 1203 AFENSEKN 1203 AFFNSEKN 1203 AFSNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFEN D66SEKN 1504 AFSNSEKR 1203 AFENSEKR 1203 AFEN-USEKR 1204 AFSN 6GPSEKT 1204 AFERSELT 1204 ENSEMN 1203 AFNSEMR 1203 AFSNSEMR 1203 AFTNSEMT 13T3 AGSN-JHSEMT 13T3 AGSN-IMSENN 1203 AFENSENN 1204 AFENSENN 1504 AFTNSEPN 1203 AFEN 6GNSEPN 1204 AFEN 6GNSEPN 1504 AFEN 6GNSPER 1203 AFEN 6GBSPER 1204 AFEN 6GBSEPT 13T3 AGEN GDSMKN 1203 E2 RSMKN 1204 E2 RSPCN 1203 SFRSPEN 1203 EDRSPER 1204 ENGB

TPCN 160308TPKN 1603 PP-R-42TPKN 2204 P2RTPMN 160308

OFEX 05T305TN-M08OFEX 05T305TN-ME07OFMR 0704 AER-76OFMR 0704 AER-MOFMR 0704 AETNOFMR 070405TR-ME13OFMT 050405TR-M14OFMT 050405TR-ME12OFMT 05T3 AFN-HROFMT 05T3 TN-MLOFMT 05T305 TN-76OFMT 070405TN-M15OFMT 070405 TN-ME13

R245-12T3 E-KLR245-12T3 E-MLR245-12T3 E-PLR245-12T3 K-MMR245-12T3 M-KHR245-12T3 M-KLR245-12T3 M-KMR245-12T3 M-PHR245-12T3 M-PLR245-12T3 M-PMr290-12T308

SDCW 1204 AEENSDCW 1204 AEFNSDCW 1204 AETNSDGT 1204 AFFNSDHT 1204 AEENSDHT 1204 AETNSDKT 1204 AEENSDMT 1204 AFPN P63SEAN 1203 AFEN 6LNSEAN 1204 AFEN 6LNSEAN 1504 AFEN 6LNSECN 1203 AFFNSEEN 1203 AFENSEEN 1504 AFENSEER 1203 AZ-WLSEER 1203 AZ-WMSEER1204 AFEN SEER 1204 AFERSEET 13T3 AGEN-JL

Insert reference tableLookupyourexistinginsertdesignationintheleftcolumn-thecompatibleLaminainsertisshownintheright

column.LaminaMillinggradeLT-30willreplacethegradeoftheinsertbeingused.

R

Reference Insert Lamina Insert Reference Insert Lamina Insert

S

OFMT 05T305 TROFMT 05T305 TROFER 070405TNOFER 070405TNOFER 070405TNOFER 070405TNOFMT 050405TROFMT 050405TROFMT 05T305 TROFMT 05T305 TROFMT 05T305 TROFMT 070405 TROFMT070405 TR

SEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSPMT 12T308

SDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSDKT 1204 AETNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKN 1203 AFTNSEKN 1203 AFTNSEKN 1504 AFTNSEKR 1203 AFTNSEKR 1203 AFTNSEKR 1204 AFTNSEKR 1204 AFTNSEKT 12T3 AFTN

SEKT 1204 AFTNSEKN 1203 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKT 1204 AFTNSEKN 1203 AFTNSEKN 1203 AFTN SEKN 1203 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKN 1504 AFTNSEKR 1203 AFTNSEKR 1203 AFTNSEKR 1204 AFTNSEKT 1204 AFTNSEKT 1204 AFTNSEKN 1203 AFTNSEKR 1203 AFTNSEKR 1203 AFTNSEKT 12T3 AFTNSEKT 12T3 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKN 1203 AFTNSEKN 1204 AFTNSEKN 1504 AFTNSEKR 1203 AFTNSEKR 1204 AFTNSEKT 12T3 AFTNSPKN 1203 EDTRSPKN 1204 EDTRSPKN 1203 EDTRSPKN 1203 EDTRSPKR 1204 EDTR

TPUN 160308TPK 1603 PDTRTPKN 2204 PDTRTPUN 160308

T

��

Contacts

Subsidiaries

Lamina Tech. do Brasil Ltda.Rua Macuco, 726- cj 1603 (Moema) São Paulo - SP - BrazilCep 04523-001Tel.: +55-11-5054 6700Fax: +55-11-5054 [email protected]

Lamina Technologies FranceImmeuble le Vexin, 2me Et.Place de la Fontaine 895000 Cergy Pontoise - FranceTel.: +33 (1) 34 02 05 53Fax: +33 (1) 34 02 05 [email protected]

Lamina Tech. Deutschland GmbHAthenslebener Weg 33

39418 Staßfurt - DeutschlandTel.: +49 (3925) 329 277Fax: +49 (3925) 329 [email protected]

Notes

��

Documents

Lamina General