Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
LAKE ENGINEERING COMPANY SNUBBER REPLACEMENT SEALS
Replacement seals are available from Lake Engineering Co. for most snubber models. Seals are
available in both ethylene-propylene rubber and fluorocarbon rubber, e.g., Viton®. Fluorocarbon rubber is
recommended for high temperature applications.
This catalog provides detailed information for the more common, standard snubber models. Seals for
non-standard snubber models, e.g., large bore snubbers are also available.
Each snubber model is represented in this catalog in a separate section. Illustrations are included in each
section indicating the installed location of each seal. For most models, a unique seal kit is defined for
each snubber size. However, two kits, one for the cylinder and one for the control valve, are required for
each Grinnell snubber and for each Basic Engineers snubber. The control valve kit for Grinnell snubbers
includes seals for the control valve, reservoir, and associated fittings.
TO ORDER: For seal kits, specify the LEC Kit No. and the material code (EPR for ethylene-propylene;
FKM for Viton). For individual seals, specify the LEC Part No. and the material code
(EPR for ethylene-propylene; FKM for Viton).
EXAMPLE: LEC Seal Kit No. 1181; EPR, or
LEC Part No. 1139-031; FKM
Note: Seals and seal kits for other hydraulic equipment such as actuators and valves are also
available. For information on seals and seal kits not listed in this catalog, contact:
Lake Engineering Co.
P.O. Box 296; 10 Austin Ave.
Greenville, RI 02828
Tel: 401-949-4733
Fax: 401-949-0220
® Viton is a registered tradename of DuPont Company.
TABLE OF CONTENTS
SECTION 1 - GRINNELL SNUBBERS
SECTION 2 - BASIC ENGINEERS SNUBBERS
SECTION 3 - BERGEN-PATERSON SNUBBERS
SECTION 4 - E-SYSTEMS SNUBBERS
SECTION 1
SEALS FORGRINNELL SNUBBERS
HOW TO IDENTIFY GRINNELL SNUBBER MODELS
This catalog describes replacement seals for the Grinnell Figure 200 and Figure 201 snubber models PH-
65, PH-69, PH-72, and PH-74R.
Note: Seals are also available for Grinnell "Configuration A" snubbers.
Various control valve models are used for Grinnell snubbers. These are described in Table 1. Various
hydraulic cylinder models (manufacturers) are also used; these are described in Table 2. W hen ordering
replacement seals for a Grinnell snubber, the snubber valve model, cylinder model, and cylinder bore size
must first be identified.
TABLE 1
CONTROL VALVES USED W ITH GRINNELL SNUBBERS
Each control valve described below is mounted on the snubber using one of the following
three mounting styles:
Style 1: Valve suspended between hydraulic fittings, above the cylinder
Style 2: Valve mounted directly (manifolded) to the cylinder
Style 3: Separate tension and compression valves mounted directly (manifolded)
to either end of the cylinder.
Valve Model Mounting Style Adjustable? Other Identifying Features
Shuttle (Spool) Valve Model 1226(Figure 8)
1 NoFour socket head pipe plugs on the top
of the valve.
Single Orifice ValveModel 1225(Figure 7)
1 Yes
One adjustment knob on top of thevalve.
Two (Allen head) adjustment screws onthe bottom of the valve.
Dual Orifice ValveModel 1224(Figure 6)
1 Yes
Two (slotted head) adjustment screwson the top of the valve.
Two (Allen head) adjustment screws onthe bottom of the valve.
Dual Orifice ValveModel 1001 & 1575
(Figure 9)2 Yes
Four adjustment screws on the top ofthe valve
Dual Orifice ValveW ith Metal Reservoir
Model 1609(Figure 10)
2 YesFour adjustment screws on the top of
the valve
Large Bore ValveW ith Metal Reservoir
Model 1325(Figure 11)
3 YesTwo valves per snubber.
Two adjustment screws per valve.
TABLE 2
HYDRAULIC CYLINDER MODELS USED W ITH GRINNELL SNUBBERS
Notes: The cylinder cap is the end block at the opposite end of the cylinder from the piston rod end. The cylinder cap may be either round or square.
The cylinder head is the end block at the piston rod end of the cylinder. The cylinder head may be either round or square.
The cylinder tube is the cylindrically-shaped component comprising the body of the cylinder.
Tie rods are long threaded rods that are used to join the cylinder cap, tube and head for some snubber models. For other models the cylinder tube iswelded, screwed, or bolted directly to the cap or head.
A retainer plate is used on some cylinder models to retain the piston rod bearing and/or rod seal assembly. The retainer plate is located directly in frontof the head; it has the same outside dimensions as the head, but is considerably thinner.
Model(Manufacturer)
Cap/HeadConfiguration
Tie RodConfig.?
RetainerPlate?
Bore Sizes(inches)
SerialNo. Style*
Other IdentifyingFeatures
Miller(Figure 1) Square Yes Yes
1-1/2, 2-1/2,3-1/4, 4, 5, 6,
8
Eight digits, followed bya sequence number,e.g., "75127512-123
Valve mounted directly (manifolded) to the cylinder,or suspended above, in which case, a plugged portwith two tapped holes will be visible on the side of
both the head and cap.
Lynair(Figure 2)
Square Yes Yes1-1/2, 2,
2-1/2, 3-1/4, 4Five digits, e.g.,
"53579"Single port on the top side of the head and cap; no
machined holes on the remaining sides.
Tomkins-Johnson
(Figure 3)
Round andSquare
Yes No5, 6, 8, 10
Eight digits beginningwith the number "3",
e.g.,"33156715"
Smaller (bleeder) port adjacent to main port on headand cap
Lindco(Figure 4)
Round No No 2-1/2, 3-1/2, 4Four digits followed bya dash followed by the
letter "D", e.g., "1357-D"
Cylinder tube threaded at both ends and screweddirectly to cap and head. Lock ring at cap end.
Bendix-W estinghouse
(Figure 5)Round No No 2-1/2, 3-1/2, 4
Three digits or less,e.g., "246"
Cylinder tube welded to cap. Other end bolted tohead.
* Grinnell snubbers usually include three serial numbers, one for the cylinder (stamped on the cylinder head), one for the control valve (stamped on thevalve), and a third for the snubber serial number (identified on the snubber nameplate). The serial number referred to in the table above applies to thecylinder serial number only.
FIGURE 1SEAL LOCATION DETAIL
MILLER CYLINDER FOR GRINNELL SNUBBER
REF: LEC SEAL KIT NOS. 1162, 1163, 1164, 1165, 1201, 1202, 1203, AND 1529
FIGURE 2SEAL LOCATION DETAIL
LYNAIR CYLINDER FOR GRINNELL SNUBBER
REF: LEC SEAL KIT NOS. 1172, 1173, 1174, AND 1175
ITEM 10 NOT SHOWN.
FIGURE 3SEAL LOCATION DETAIL
TOMKINS-JOHNSON CYLINDER FOR GRINNELL SNUBBER
REF: LEC SEAL NOS. 1177, 1178, AND 1238
FIGURE 4SEAL LOCATION DETAIL
LINDCO CYLINDER FOR GRINNELL SNUBBER
REF: LEC SEAL KIT NOS. 1168, 1169, AND 1170
FIGURE 5SEAL LOCATION DETAIL
BENDIX WESTINGHOUSE CYLINDER FOR GRINNELL SNUBBER
REF: LEC SEAL KIT NOS. 1168, 1169, AND 1170
FIGURE 6SEAL LOCATION DETAIL
GRINNELL DUAL ORIFICE CONTROL VALVEMODEL BH-1224
REF: LEC SEAL KIT NO. 1196
FIGURE 7SEAL LOCATION DETAIL
GRINNELL SINGLE ORIFICE CONTROL VALVEMODEL BH-1225
REF: LEC SEAL KIT NO. 1196
FIGURE 8SEAL LOCATION DETAIL
GRINNELL SHUTTLE VALVE MODEL BH-1226
REF: LEC SEAL KIT NO. 1196
FIGURE 9SEAL LOCATION DETAIL
GRINNELL DUAL ORIFICE CONTROL VALVEMODEL AH-1001 AND AH-1575
REF: LEC SEAL KIT NO. 1197
FIGURE 10SEAL LOCATION DETAIL
GRINNELL METAL RESERVOIR SNUBBERMODEL AH-1609
REF: LEC SEAL KIT NO. 1297
FIGURE 11SEAL LOCATION DETAIL
GRINNELL LARGE BORE SNUBBER CONTROL VALVEMODEL BH-1325
REF: LEC SEAL KIT NO. 1820
LAKE ENGINEERING COMPANYSEAL KIT NO. 1162
SEALS FOR 1 1/2" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1445
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Special Piston Rod Seal 1150-150
2 2 U-Cup Piston Seal 1151-150
3 2 O-Ring Tube End Seal 1152-150
4 1 Wiper Piston Rod Wiper 1153-150
5 1 Wave Spring For Piston Rod Seal 1154-150
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1163
SEALS FOR 2 1/2" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1446
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Special Piston Rod Seal 1150-250
2 2 U-Cup Piston Seal 1151-250
3 2 O-Ring Tube End Seal 1152-250
4 1 Wiper Piston Rod Wiper 1153-250
5 1 Wave Spring For Piston Rod Seal 1154-250
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1164
SEALS FOR 3 1/4" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1447
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item
No. Qty.
Seal
Type Description
LEC
Part
No.
1 1 Special Piston Rod Seal 1150-325
2 2 U-Cup Piston Seal 1151-325
3 2 O-Ring Tube End Seal 1152-325
4 1 Wiper Piston Rod Wiper 1153-325
5 1 Wave Spring For Piston Rod Seal 1154-325
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1165
SEALS FOR 4" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1448
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Special Piston Rod Seal 1150-400
2 2 U-Cup Piston Seal 1151-400
3 2 O-Ring Tube End Seal 1152-400
4 1 Wiper Piston Rod Wiper 1153-400
5 1 Wave Spring For Piston Rod Seal 1154-400
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1201
SEALS FOR 5" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1482
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Special Piston Rod Seal 1150-500
2 2 U-Cup Piston Seal 1151-500
3 2 O-Ring Tube End Seal 1152-500
4 1 Wiper Piston Rod Wiper 1153-500
5 1 Wave Spring For Piston Rod Seal 1154-500
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1202
SEALS FOR 6" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1483
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Special Piston Rod Seal 1150-600
2 2 U-Cup Piston Seal 1151-600
3 2 O-Ring Tube End Seal 1152-600
4 1 Wiper Piston Rod Wiper 1153-600
5 1 Wave Spring For Piston Rod Seal 1154-600
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1203
SEALS FOR 8" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1826
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Special Piston Rod Seal 1150-800
2 2 U-Cup Piston Seal 1151-800
3 2 O-Ring Tube End Seal 1152-800
4 1 Wiper Piston Rod Wiper 1153-800
5 1 Wave Spring For Piston Rod Seal 1154-800
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1529
SEALS FOR 10" BORE MILLER CYLINDERSReplaces Grinnell Kit No. AH-1827
(Please refer to Figure 1)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Special Piston Rod Seal 1150-1000
2 2 U-Cup Piston Seal 1151-1000
3 2 O-Ring Tube End Seal 1152-1000
4 1 Wiper Piston Rod Wiper 1153-1000
5 1 Wave Spring For Piston Rod Seal 1154-1000
6 2 O-Ring NPT Port Plug Seal 1138-005
7 2 O-Ring SAE Port Plug Seal 1138-007
8 2 O-Ring Alt. SAE Port Plug Seal 1138-009
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Tube End Seal: Parker E-740-75 or E-692-75
Buckeye Rubber EPR8003RM
Parker V-747-75
Rod Seals / Piston Seals: Buckeye Rubber EPR8003RM Minnesota Rubber 514GJ
W iper: Buckeye Rubber EPR8003RM Minnesota Rubber 514AQ
LAKE ENGINEERING COMPANYSEAL KIT NO. 1172
SEALS FOR 1 1/2" BORE LYNAIR CYLINDERSReplaces Grinnell Kit No. AH-1427
(Please refer to Figure 2)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Piston to Piston Rod Seal 1139-019
2* N/A O-Ring Rod Bearing to Head Seal N/A
3 2 O-Ring Tube End Seal 1139-029
4 1 Wiper Piston Rod Wiper 1142-008
5 1 Polypak® Piston Rod Seal 1147-058
6 2 Polypak® Piston Seal 1145-058
* This size does not use a bearing-to-head seal.
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4205-75
Polypak Expander O-Rings: Parker E-740-75 Parker V-747-75
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1173
SEALS FOR 2 1/2" BORE LYNAIR CYLINDERSReplaces Grinnell Kit No. AH-1428
(Please refer to Figure 2)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Piston to Piston Rod Seal 1139-071
2 1 O-Ring Rod Bearing to Head Seal 1139-154
3 2 O-Ring Tube End Seal 1139-095
4 1 Wiper Piston Rod Wiper 1142-014
5 1 Polypak® Piston Rod Seal 1147-092
6 2 Polypak® Piston Seal 1145-115
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4205-75
Polypak Expander O-Rings: Parker E-740-75 Parker V-747-75
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1174
SEALS FOR 3 1/4" BORE LYNAIR CYLINDERSReplaces Grinnell Kit No. AH-1429
(Please refer to Figure 2)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Piston to Piston Rod Seal 1139-146
2 1 O-Ring Rod Bearing to Head Seal 1139-153
3 2 O-Ring Tube End Seal 1139-101
4 1 Wiper Piston Rod Wiper 1142-020
5 1 Polypak® Piston Rod Seal 1147-113
6 2 Polypak® Piston Seal 1145-146
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4205-75
Polypak Expander O-Rings: Parker E-740-75 Parker V-747-75
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1175
SEALS FOR 4" BORE LYNAIR CYLINDERSReplaces Grinnell Kit No. AH-1430
(Please refer to Figure 2)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Piston to Piston Rod Seal 1139-150
2 1 O-Ring Rod Bearing to Head Seal 1139-155
3 2 O-Ring Tube End Seal 1139-104
4 1 Wiper Piston Rod Wiper 1142-024
5 1 Polypak® Piston Rod Seal 1147-123
6 2 Polypak® Piston Seal 1145-177
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4205-75
Polypak Expander O-Rings: Parker E-740-75 Parker V-747-75
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1177
SEALS FOR TOMKINS-JOHNSON 5" CYLINDERSReplaces Grinnell Kit No. AH-1435
(Please refer to Figure 3)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 2 Polypak® Piston Rod Seal 1147-144
2 2 Polypak® Piston Seal 1145-220
3 1 Wiper Piston Rod Wiper 1143-036
4 2 O-Ring Tube End Seal 1139-176
5 1 O-Ring Piston to Piston Rod Seal 1139-153
6 2 O-Ring Bleeder Plug Seal 1138-003
7 2 Backup Ring For Piston Seal 1027
8 1 Rider Ring Piston Rider Ring 1028
9 1 Rider Ring Piston Rod Rider Ring 1029
10 2 O-Ring Fill Port Adapter Seal 1138-005
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Polypak Piston Seal Outer Jacket: Parker E-4207-90 Parker V-4208-90
Polypak Rod Seal Outer Jacket: Parker E-4248-75 Parker V-4205-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
W iper: Parker E-4207-90 Parker V-4208-90
Backup & Rider Rings: Phenolic Phenolic
LAKE ENGINEERING COMPANYSEAL KIT NO. 1178
SEALS FOR TOMKINS-JOHNSON 8" CYLINDERSReplaces Grinnell Kit No. AH-1444
(Please refer to Figure 3)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 2 Polypak® Piston Rod Seal 1147-213
2 2 Polypak® Piston Seal 1145-325
3 1 Wiper Piston Rod Wiper 1143-052
4 2 O-Ring Tube End Seal 1139-192
5 1 O-Ring Piston to Piston Rod Seal 1139-165
6 2 O-Ring Bleeder Plug Seal 1138-003
7 2 Backup Ring For Piston Seal 1041
8 1 Rider Ring Piston Rider Ring 1042
9 1 Rider Ring Piston Rod Rider Ring 1043
10 2 O-Ring Fill Port Adapter Seal 1138-005
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Polypak Piston Seal Outer Jacket: Parker E-4207-90 Parker V-4208-90
Polypak Rod Seal Outer Jacket: Parker E-4248-75 Parker V-4205-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
W iper: Parker E-4207-90 Parker V-4208-90
Backup & Rider Rings: Phenolic Phenolic
LAKE ENGINEERING COMPANYSEAL KIT NO. 1238
SEALS FOR TOMKINS-JOHNSON 10" CYLINDERSReplaces Grinnell Kit No. AH-1442
(Please refer to Figure 3)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 2 Polypak® Piston Rod Seal 1147-258
2 2 Polypak® Piston Seal 1145-380
3 1 Wiper Piston Rod Wiper 1143-060
4 2 O-Ring Tube End Seal 1139-372
5 1 O-Ring Piston to Piston Rod Seal 1139-999
6 2 O-Ring Bleeder Plug Seal 1138-003
7 2 Backup Ring For Piston Seal 1239
8 1 Rider Ring Piston Rider Ring 1240
9 1 Rider Ring Piston Rod Rider Ring 1241
10 2 O-Ring Fill Port Adapter Seal 1138-005
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Polypak Piston Seal Outer Jacket: Parker E-4207-90 Parker V-4208-90
Polypak Rod Seal Outer Jacket: Parker E-4248-75 Parker V-4205-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
W iper: Parker E-4207-90 Parker V-4208-90
Backup & Rider Rings: Phenolic Phenolic
LAKE ENGINEERING COMPANYSEAL KIT NO. 1168
SEALS FOR 2 1/2" LINDCO/BENDIX WESTINGHOUSE CYLINDERReplaces Grinnell Kit No. AH-1431
(Please refer to Figures 4 & 5)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 2 O-Ring Head/Cap to Tube Seal (Lindco only) 1139-159
2 2 Backup For Head/Cap to Tube Seal (Lindco only) 1140-159
3 1 O-Ring Piston to Piston Rod Seal 1139-136
4 1 O-Ring Rod Bearing to Head Seal 1139-149
5 1 Backup For Rod Bearing to Head Seal 1140-149
6 1 T-SealRod Seal with Backup Rings
1155-017 (1)
or1157-017 (2)6A 2 Backup
7 1 T-SealPiston Seal with Backup Rings
1156-030(1)
or1159-027(2)7A 2 Backup
8 1 O-Ring Head to Tube Seal (Bendix/Westinghouse only) 1139-154
9 1 Backup For Head to Tube Seal (Bendix/West. only) 1140-154
10 2 O-Ring Head/Cap Tube Fitting Seal (As Required) 1138-007
Notes: (1) Greene, Tweed & Co.(2) Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952
Parker E-4248-75
Greene, Tweed V-731
Parker V-4205-75
T-Seal Backup Rings: Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1169
SEALS FOR 3 1/2" LINDCO/BENDIX WESTINGHOUSE CYLINDERReplaces Grinnell Kit No. AH-1432
(Please refer to Figures 4 & 5)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 2 O-Ring Head/Cap to Tube Seal (Lindco only) 1139-169
2 2 Backup For Head/Cap to Tube Seal (Lindco only) 1140-169
3 1 O-Ring Piston to Piston Rod Seal 1139-148
4 1 O-Ring Rod Bearing to Head Seal 1139-155
5 1 Backup For Rod Bearing to Head Seal 1140-155
6 1 T-SealRod Seal with Backup Rings
1155-025(1)
or1157-024(2)6A 2 Backup
7 1 T-SealPiston Seal with Backup Rings
1156-038(1)
or1159-034(2)7A 2 Backup
8 1 O-Ring Head to Tube Seal (Bendix/Westinghouse only) 1139-162
9 1 Backup For Head to Tube Seal (Bendix/West. only) 1140-162
10 2 O-Ring Head/Cap Tube Fitting Seal (As Required) 1138-007
Notes: (1) Greene, Tweed & Co.(2) Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952
Parker E-4248-75
Greene, Tweed V-731
Parker V-4205-75
T-Seal Backup Rings: Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1170
SEALS FOR 4" LINDCO/BENDIX WESTINGHOUSE CYLINDERReplaces Grinnell Kit No. AH-1433
(Please refer to Figures 4 & 5)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 2 O-Ring Head/Cap to Tube Seal (Lindco only) 1139-173
2 2 Backup For Head/Cap to Tube Seal (Lindco only) 1140-173
3 1 O-Ring Piston to Piston Rod Seal 1139-148
4 1 O-Ring Rod Bearing to Head Seal 1139-159
5 1 Backup For Rod Bearing to Head Seal 1140-159
6 1 T-SealRod Seal with Backup Rings
1155-027(1)
or1157-026(2)6A 2 Backup
7 1 T-SealPiston Seal with Backup Rings
1156-042(1)
or1159-038(2)7A 2 Backup
8 1 O-Ring Head to Tube Seal (Bendix/Westinghouse only) 1139-166
9 1 Backup For Head to Tube Seal (Bendix/West. only) 1140-166
10 2 O-Ring Head/Cap Tube Fitting Seal (As Required) 1138-007
Notes: (1) Greene, Tweed Co.(2) Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952
Parker E-4248-75
Greene, Tweed V-731
Parker V-4205-75
T-Seal Backup Rings: Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1196
VALVE, RESERVOIR, AND FITTING SEALSFOR BH-1224, BH-1225, AND BH-1226 SNUBBER VALVES
Replaces Grinnell Kit No. AH-1425(Please refer to Figures 6, 7, & 8)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 3 O-Ring Reservoir Tie Rod Seal 1139-011
2 6 O-RingConnecting Tube Seal (2 req'd)Lenz Tee Seal (4 req'd)
1139-060
3 4 Backup Ring For Lenz Tee Seal 1140-060
4 2 O-Ring Internal Valve Barrel Seal (Model 1224 Only) 1139-061
5 2 O-Ring Valve Cap Seal (Model 1226 Only) 1139-062
6 2 O-Ring Reservoir End Seal 1139-083
7 2 O-Ring External Valve Barrel Seal (Model 1224 Only) 1139-138
8 2 Thred Seal®Lock-Up Adjustment Screw Thread Seal(Model 1224 Only)
1141-002
9 2 Thred Seal®Bleed Adjustment Screw Thread Seal(Model 1224 Only)
1141-004
10 2 WasherFor Lock-Up Adjustment Screw Thread Seal(Model 1224 Only)
1144-000
11 2Washer For Bleed Adjustment Screw Thread Seal
(Model 1224 Only)1144-002
12 1 O-Ring Orifice Body Seal (Model 1225 Only) 1139-005
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Thread Seals: Parker E-1831-80 Parker V-720
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
W ashers: Steel Steel
LAKE ENGINEERING COMPANYSEAL KIT NO. 1197
SEALS FOR VALVE, LEXAN RESERVOIR, AND FITTINGSFOR AH-1575 & AH-1001 SNUBBER VALVES
Replaces Grinnell Kit No. AH-1503(Please refer to Figure 9)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 4 O-RingValve Body to Head Seal (1 Req'd)Valve End Block to Cap Seal (1 Req'd)Lenz Elbow Seal (2 Req'd)
1139-011
2 2 Backup Ring For Lenz Elbow Seal 1140-011
3 2 O-Ring Internal Valve Barrel Seal 1139-061
4 2 O-Ring External Valve Barrel Seal 1139-138
5 2 O-RingSeal - Reservoir End Block Without Seal Groove(1-1/2" and 2-1/2" snubber bore sizes)
1139-086
6 2 O-RingSeal - Reservoir End Block Without Seal Groove(3-1/4" thru 6" snubber bore sizes)
1139-094
7 2 O-RingSeal - Reservoir End Block with Seal Groove(1-1/2" and 2-1/2" snubber bore sizes)
1139-232
8 2 O-RingSeal - Reservoir End Block with Seal Groove(3-1/4" thru 6" snubber bore sizes)
1139-236
9 2 Thred Seal® Lock-Up Adjustment Screw Thread Seal 1141-002
10 2 Thred Seal® Bleed Adjustment Screw Thread Seal 1141-003
11 2 Thred Seal® Connecting Tube Thread Seal 1141-007
12 2 Washer For Lock-Up Adjustment Screw Thread Seal 1144-000
13 2 Washer For Bleed Adjustment Screw Thread Seal 1144-001
14 2 Washer For Connecting Tube Thread Seal 1144-003
15 4 O-RingLenz Elbow Boss Seal (2 Req'd)Valve Body Plug Seal (1 Req'd)Breather Filter Seal (1 Req'd)
1138-005
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Thread Seals: Parker E-1831-80 Parker V-720
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
W ashers: Steel Steel
LAKE ENGINEERING COMPANYSEAL KIT NO. 1297
SEALS FOR VALVE, RESERVOIR, AND FITTINGS FOR 1-1/2" THRU 6" BOREGRINNELL SNUBBERS WITH METAL RESERVOIR
Replaces Grinnell Kit No. AH-1609(Please refer to Figure 10)
(Available in Ethylene-Propylene and Viton)
Part No. Qty.
SealType Description
LECPartNo.
1 6 O-Ring Valve Body to Head Seal (1 req'd)Valve End Block to Cap Seal (1 req'd)Lenz Elbow Seal (2 req'd)
1139-011
2 2 Backup Ring Backup Ring for Lenz Elbow 1140-011
3 2 O-Ring Internal Valve Barrel Seal 1139-061
4 2 O-Ring External Valve Barrel Seal 1139-138
5 2 O-Ring 1 1/2" Reservoir End Seal 1139-085
6 2 O-Ring 2 1/2" Reservoir End Seal 1139-093
7 2 O-Ring 3 1/4" & 4" Reservoir End Seal 1139-100
8 2 O-Ring 5" & 6" Reservoir End Seal 1139-103
9 2 Thred Seal® Lock-Up Adjustment Screw Thread Seal 1141-002
10 2 Thred Seal® Bleed Adjustment Screw Thread Seal 1141-003
11 2 Thred Seal® Connecting Tube Thread Seal 1141-007
12 2 Washer Lock-Up Adjustment Screw Washer 1144-000
13 2 Washer Bleed Adjustment Screw Washer 1144-001
14 2 Washer Connecting Tube Washer 1144-003
15 10 O-Ring Lenz Elbow Boss Seal (2 Req'd)Valve Body Plug (1 Req'd)Breather Filter (1 Req'd)Reservoir End Block Plugs/Fittings (6 Req'd)
1138-005
16 4 O-Ring Sight Glass Seal 1138-003
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Thread Seals: Parker E-1831-80 Parker V-720
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
W ashers: Steel Steel
LAKE ENGINEERING COMPANYSEAL KIT NO. 1820
SEALS FOR VALVE, RESERVOIR, AND FITTINGS FOR 8" BOREGRINNELL SNUBBERS WITH METAL RESERVOIR
(Please refer to Figure 11)
(Available in Ethylene-Propylene and Viton)
Part No. Qty.
SealType Description
LECPartNo.
1 2 O-Ring Male Connector Seal 1138-007
2 4 O-Ring Control Valve Retainer Plate Seal 1139-073
3 4 Thred Seal® Adjustment Screw Thread Seal 1141-003
4 4 Washer Adjustment Screw Washer 1144-001
5 9 O-Ring Lenz Fitting to Reservoir End Block (2 Req’d)Breather Filter (1 Req’d)Reservoir End Block Plugs/Fittings (6 Req’d)
1138-005
6 1 O-Ring Reservoir Feed Tube Seal 1139-011
7 1 Backup Ring Feed Tube Seal Backup Ring 1140-011
8 2 O-Ring Reservoir End Seal 1139-106
9 4 O-Ring Sight Glass Seal 1138-003
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 or E-692-75 Parker V-747-75
Thread Seals: Parker E-1831-80 Parker V-720
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
W ashers: Steel Steel
SECTION 2
SEALS FORBASIC ENGINEERS SNUBBERS
FIGURE 12SEAL LOCATION DETAIL
BASIC ENGINEER CYLINDER
REF: LEC SEAL KIT NOS. 1454, 1702, 1512, 1424, 1703, 1704, 1419, 1420, 1705, 1706, 1707
FIGURE 13ASEAL LOCATION DETAIL
BASIC ENGINEERS VALVE4" BORE AND UNDER
REF: LEC SEAL KIT NO. 1583
FIGURE 13BSEAL LOCATION DETAIL
BASIC ENGINEERS VALVE5" BORE AND ABOVE
REF: LEC SEAL KIT NO. 1583
FIGURE 13CSEAL LOCATION DETAIL
BASIC ENGINEERS VALVERACINE VALVE
REF: LEC SEAL KIT NO. 1583
LAKE ENGINEERING COMPANYSEAL KIT NO. 1454
SEALS FOR 3/4" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-004
2 1 Polypak® Piston Rod Seal 1147-017
3 2 Polypak® Piston Seal 1145-009
4 1 O-Ring Piston to Piston Rod Seal 1139-007
5 3 O-Ring Body Seal 1139-019
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-013
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
Wiper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1702
SEALS FOR 1" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-006
2 1 Polypak® Piston Rod Seal 1147-028
3 2 Polypak® Piston Seal 1145-021
4 1 O-Ring Piston to Piston Rod Seal 1139-010
5 4 O-Ring Body Seal 1139-021
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-013
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
Wiper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1512
SEALS FOR 1-1/2" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-012
1A 1 Wiper Alternate Piston Rod Wiper 1143-008
2 1 Polypak® Piston Rod Seal 1149-058
2A 1 Polypak® Alternate Piston Rod Seal 1147-038
3 2 Polypak® Piston Seal 1640
4 1 O-Ring Piston to Piston Rod Seal 1469-263
4A 1 O-Ring Alternate Piston to Piston Rod Seal 1469-354
5 4 O-Ring Body Seal 1139-076
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-013
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1424
SEALS FOR 2" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-012
2 1 Polypak® Piston Rod Seal 1149-058
3 2 Polypak® Piston Seal 1145-093
4 1 O-Ring Piston to Piston Rod Seal 1469-263
5 4 O-Ring Body Seal 1139-084
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-013
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1703
SEALS FOR 2-1/2" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-018
1A 1 Wiper Alternate Piston Rod Wiper 1143-016
2 1 Polypak® Piston Rod Seal 1149-091
2A 1 Polypak® Alternate Piston Rod Seal 1147-079
3 2 Polypak® Piston Seal 1145-115
4 1 O-Ring Piston to Piston Rod Seal 1139-019
4A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-017
5 4 O-Ring Body Seal 1139-156
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-018
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1704
SEALS FOR 3-1/4" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-024
2 1 Polypak® Piston Rod Seal 1149-114
3 2 Polypak® Piston Seal 1926
4 1 O-Ring Piston to Piston Rod Seal 1139-023
5 4 O-Ring Body Seal 1139-162
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-018
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1419
SEALS FOR 4" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-028
2 1 Polypak® Piston Rod Seal 1148-124
3 2 Polypak® Piston Seal 1145-179
4 1 O-Ring Piston to Piston Rod Seal 1139-027
5 4 O-Ring Body Seal 1139-340
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-018
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1420
SEALS FOR 5" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-036
2 1 Polypak® Piston Rod Seal 1148-144
3 2 Polypak® Piston Seal 1145-220
4 1 O-Ring Piston to Piston Rod Seal 1139-011
5 4 O-Ring Body Seal 1139-176
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-018
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1705
SEALS FOR 6" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-044
2 1 Polypak® Piston Rod Seal 1149-165
3 2 Polypak® Piston Seal 1809
4 1 O-Ring Piston to Piston Rod Seal 1139-033
5 4 O-Ring Body Seal 1139-184
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-018
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1706
SEALS FOR 8" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-052
2 1 Polypak® Piston Rod Seal 1149-213
3 2 Polypak® Piston Seal 1145-325
4 1 O-Ring Piston to Piston Rod Seal 1139-039
5 4 O-Ring Body Seal 1139-192
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-018
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1707
SEALS FOR 10" BORE BASIC ENGINEERS SNUBBER MODEL BE-410(Please refer to Figure 12)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 Wiper Piston Rod Wiper 1143-056
2 1 Polypak® Piston Rod Seal 1149-237
3 2 Polypak® Piston Seal 1145-380
4 1 O-Ring Piston to Piston Rod Seal 1139-040
5 4 O-Ring Body Seal 1139-200
6 4 O-Ring Manifold to Head/Cap Feed Seal 1139-010
7 2 O-Ring Manifold to Reservoir Feed Seal 1139-011
8 2 O-Ring Sight Gauge Seal 1139-018
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Expander O-Ring: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4207-90 Parker V-4208-90
W iper: Parker E-4207-90 Parker V-4208-90
LAKE ENGINEERING COMPANYSEAL KIT NO. 1583
SEALS FOR BASIC ENGINEERS SNUBBER MODEL BE-410 VALVE BLOCK - ALL SIZES(Please refer to Figures 13A, 13B, & 13C)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 2 O-Ring Poppet Cap Seal 1138-007
2 2 O-Ring Needle/Relief Valve Cap Seal 1138-007
3 2 O-Ring Needle Seal 1139-009
4 1 O-Ring Valve Block Middle Head Feed Drill Port Cap Seal 1138-002
5 1 O-Ring Valve Block Rod End Head Feed Drill Port Cap Seal 1138-002
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-rings: Parker E-740-75 Parker V-747-75
SECTION 3
SEALS FORBERGEN-PATERSON SNUBBERS
FIGURE 14SEAL LOCATION DETAIL
BERGEN-PATTERSON SNUBBER MODEL NF, MANIFOLD, AND M-77
REF: LEC SEAL KIT NOS. 1181, 1182, 1183, 1184, 1185, 1186, 1187, 1188
LAKE ENGINEERING COMPANYSEAL KIT NO. 1181
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA3(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00211-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-031
3 1 Polypak® Reservoir Piston Seal 1179-095
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-060
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-005
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-060
10 1 O-Ring Connector Tube Sliding Seal 1139-060
11 2 O-Ring Tube End Seal 1139-076
12 1 O-Ring Piston to Piston Rod Seal 1139-059
12A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-136
13 1 Polypak® Piston Rod Seal 1149-058
14 1 Wiper Piston Rod Wiper 1142-008
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
Wiper: Parker E-4207-90 Parker V-4208-
LAKE ENGINEERING COMPANYSEAL KIT NO. 1182
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA10(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00212-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-035
3 1 Polypak® Reservoir Piston Seal 1179-118
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-060
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-005
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-060
10 1 O-Ring Connector Tube Sliding Seal 1139-060
11 2 O-Ring Tube End Seal 1139-156
12 1 O-Ring Piston to Piston Rod Seal 1139-136
12A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-142
13 1 Polypak® Piston Rod Seal 1149-091
14 1 Wiper Piston Rod Wiper 1142-014
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
W iper: Parker E-4207-90 Parker V-4208-
LAKE ENGINEERING COMPANYSEAL KIT NO. 1183
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA20(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00213-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-099
3 1 Polypak® Reservoir Piston Seal 1179-148
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-060
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-005
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-060
10 1 O-Ring Connector Tube Sliding Seal 1139-060
11 2 O-Ring Tube End Seal 1139-162
12 1 O-Ring Piston to Piston Rod Seal 1139-140
12A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-146
13 1 Polypak® Piston Rod Seal 1149-113
14 1 Wiper Piston Rod Wiper 1142-020
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
W iper: Parker E-4207-90 Parker V-4208-
LAKE ENGINEERING COMPANYSEAL KIT NO. 1184
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA30(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00214-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-102
3 1 Polypak® Reservoir Piston Seal 1179-177
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-060
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-005
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-060
10 1 O-Ring Connector Tube Sliding Seal 1139-060
11 2 O-Ring Tube End Seal 1139-168
12 1 O-Ring Piston to Piston Rod Seal 1139-144
12A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-148
13 1 Polypak® Piston Rod Seal 1149-123
14 1 Wiper Piston Rod Wiper 1142-024
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
W iper: Parker E-4207-90 Parker V-4208-
LAKE ENGINEERING COMPANYSEAL KIT NO. 1185
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA50(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00215-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-106
3 1 Polypak® Reservoir Piston Seal 1179-220
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-060
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-005
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-060
10 1 O-Ring Connector Tube Sliding Seal 1139-060
11 2 O-Ring Tube End Seal 1139-176
12 1 O-Ring Piston to Piston Rod Seal 1139-148
12A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-152
13 1 Polypak® Piston Rod Seal 1149-144
14 1 Wiper Piston Rod Wiper 1142-032
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
W iper: Parker E-4207-90 Parker V-4208-
LAKE ENGINEERING COMPANYSEAL KIT NO. 1186
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA70(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00216-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-110
3 1 Polypak® Reservoir Piston Seal 1179-261
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-060
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-005
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-060
10 1 O-Ring Connector Tube Sliding Seal 1139-060
11 2 O-Ring Tube End Seal 1139-184
12 1 O-Ring Piston to Piston Rod Seal 1139-151
12A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-156
13 1 Polypak® Piston Rod Seal 1149-164
14 1 Wiper Piston Rod Wiper 1142-033
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
W iper: Parker E-4207-90 Parker V-4208-
LAKE ENGINEERING COMPANYSEAL KIT NO. 1187
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA130(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00218-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-191
3 1 Polypak® Reservoir Piston Seal 1179-221
3A 1 Polypak® Alternate Reservoir Piston Seal 1179-325
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-062
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-013
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-065
10 1 O-Ring Connector Tube Sliding Seal 1139-065
11 2 O-Ring Tube End Seal 1139-192
12 1 O-Ring Piston to Piston Rod Seal 1139-156
12A 1 O-Ring Alternate Piston to Piston Rod Seal 1139-158
13 1 Polypak® Piston Rod Seal 1149-188
14 1 Wiper Piston Rod Wiper 1142-037
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
W iper: Parker E-4207-90 Parker V-4208-
LAKE ENGINEERING COMPANYSEAL KIT NO. 1188
SEALS FOR BERGEN-PATERSON SNUBBER MODEL NO. HSSA200(NF, Manifold, and M-77 Configurations)
Replaces Bergen-Paterson (Anchor/Darling) Kit No. 706-00210-002(Please refer to Figure 14)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 O-Ring Reservoir Bleed-Off Screw Seal 1139-009
2 1 O-Ring Reservoir Tube End Seal 1139-191
3 1 Polypak® Reservoir Piston Seal 1179-262
3A 1 Polypak® Alternate Reservoir Piston Seal 1179-325
4 2 O-Ring Valve to Reservoir Mounting Seal 1139-062
5 2 O-Ring Connector Tube/Stop Plug Boss Seal 1138-013
6 4 O-Ring Port Plug Seal 1138-003
7 1 O-Ring Relief Valve Plug Internal Seal 1139-010
8 1 O-Ring Relief Valve Plug Boss Seal 1138-005
9 1 Backup Ring For Connector Tube Sliding Seal 1140-065
10 1 O-Ring Connector Tube Sliding Seal 1139-065
11 2 O-Ring Tube End Seal 1139-322
12 1 O-Ring Piston to Piston Rod Seal 1139-164
13 1 Polypak® Piston Rod Seal 1149-257
14 1 Wiper For Piston Rod 1142-049
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings: Parker E-740-75 Parker V-747-75
Polypak Outer Jacket: Parker E-4248-75 Parker V-4205-
Polypak Expander O- Parker E-740-75 Parker V-747-75
O-Ring Backup Ring: Parker E-652-90 Parker V-709-90
W iper: Parker E-4207-90 Parker V-4208-
SECTION 4
SEALS FORE-SYSTEMS SNUBBERS
FIGURE 15ASEAL LOCATION DETAILE-SYSTEMS SNUBBER
REF: LEC SEAL KIT NOS. 1190, 1191, 1192, 1193, 1194 AND 1195
FIGURE 15BSEAL LOCATION DETAILE-SYSTEMS SNUBBER
REF: LEC SEAL KIT NOS. 1190, 1191, 1192, 1193, 1194 AND 1195
LAKE ENGINEERING COMPANYSEAL KIT NO. 1190
SEALS FOR E-SYSTEMS 10 KIP SNUBBERSReplaces Kit No. 152601
(Please refer to Figures 15A & 15B)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 T-Seal Reservoir Piston Seal2002-036
1A 2 Backup Ring For Reservoir Piston Seal
2 1 T-Seal Cylinder Piston Seal2001-033
2A 2 Backup Ring For Cylinder Piston Seal
3 2 T-Seal Piston Rod Seal2003-022
3A 4 Backup Ring For Piston Rod Seal
4 2 O-Ring Bayonet Seal 1139-061
4A 2 Backup Ring For Bayonet Seal 1140-061
5 1 O-Ring Shut-Off Seal 1139-057
5A 1 Backup Ring For Shut-Off Seal 1140-057
6 3 O-Ring Valve External Seal 1139-020
6A 3 Backup Ring For Valve External Seal 1140-020
7 2 O-Ring Tube End Seal 1139-154
7A 2 Backup Ring For Tube End Seal 1140-154
8 N/A N/A N/A N/A
8A N/A N/A N/A N/A
9 2 O-Ring Valve Internal Seal 1139-016
9A 2 Backup Ring For Valve Internal Seal 1140-016
10 1 O-Ring Plug Seal 1138-003
11 2 O-Ring Plug Seal 1138-005
12 2 Polypak® Piston Rod Wiper 1147-073
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings and W iper Expander: Parker E-740-75 Parker V-747-75
W iper Outer Jacket: Parker E-4207-90 Parker V-4205-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952 Greene, Tweed 731
T-Seal Backup Rings Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1191
SEALS FOR E-SYSTEMS 20 KIP SNUBBERSReplaces Kit No. 152602
(Please refer to Figures 15A & 15B)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 T-Seal Reservoir Piston Seal2002-036
1A 2 Backup Ring Ring For Reservoir Piston Seal
2 1 T-Seal Cylinder Piston Seal2001-039
2A 2 Backup Ring For Cylinder Piston Seal
3 2 T-Seal Piston Rod Seal2003-025
3A 4 Backup Ring For Piston Rod Seal
4 2 O-Ring Bayonet Seal 1139-061
4A 2 Backup Ring For Bayonet Seal 1140-061
5 1 O-Ring Shut-Off Seal 1139-057
5A 1 Backup Ring For Shut-Off Seal 1140-057
6 3 O-Ring Valve External Seal 1139-020
6A 3 Backup Ring For Valve External Seal 1140-020
7 2 O-Ring Tube End Seal 1139-160
7A 2 Backup Ring For Tube End Seal 1140-160
8 N/A N/A N/A N/A
8A N/A N/A N/A N/A
9 2 O-Ring Valve Internal Seal 1139-016
9A 2 Backup Ring For Valve Internal Seal 1140-016
10 1 O-Ring Plug Seal 1138-003
11 2 O-Ring Plug Seal 1138-005
12 2 Polypak® Piston Rod Wiper 1147-090
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings and W iper Expander: Parker E-740-75 Parker V-747-75
W iper Outer Jacket: Parker E-4207-90 Parker V-4205-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952 Greene, Tweed 731
T-Seal Backup Rings Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1192
SEALS FOR E-SYSTEMS 30 KIP SNUBBERSReplaces Kit No. 152603
(Please refer to Figures 15A & 15B)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 T-Seal Reservoir Piston Seal2002-049
1A 2 Backup Ring For Reservoir Piston Seal
2 1 T-Seal Cylinder Piston Seal2001-045
2A 2 Backup Ring For Cylinder Piston Seal
3 2 T-Seal Piston Rod Seal2003-030
3A 4 Backup Ring For Piston Rod Seal
4 2 O-Ring Bayonet Seal 1139-061
4A 2 Backup Ring For Bayonet Seal 1140-061
5 1 O-Ring Shut-Off Seal 1139-057
5A 1 Backup Ring For Shut-Off Seal 1140-057
6 3 O-Ring Valve External Seal 1139-020
6A 3 Backup Ring For Valve External Seal 1140-020
7 2 O-Ring Tube End Seal 1139-166
7A 2 Backup Ring For Tube End Seal 1140-166
8 2 O-Ring Porting Tube Seal 1139-064
8A 2 Backup Ring For Porting Tube Seal 1140-064
9 2 O-Ring Valve Internal Seal 1139-016
9A 2 Backup Ring For Valve Internal Seal 1140-016
10 1 O-Ring Plug Seal 1138-003
11 2 O-Ring Plug Seal 1138-005
12 2 Polypak® Piston Rod Wiper 1147-113
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings and W iper Expander: Parker E-740-75 Parker V-747-75
W iper Outer Jacket: Parker E-4207-90 Parker V-4205-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952 Greene, Tweed 731
T-Seal Backup Rings Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1193
SEALS FOR E-SYSTEMS 50 KIP SNUBBERSReplaces Kit No. 152605
(Please refer to Figures 15A & 15B)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 T-Seal Reservoir Piston Seal2002-049
1A 2 Backup Ring For Reservoir Piston Seal
2 1 T-Seal Cylinder Piston Seal2001-055
2A 2 Backup Ring For Cylinder Piston Seal
3 2 T-Seal Piston Rod Seal 2003-034
3A 4 Backup Ring For Piston Rod Seal
4 2 O-Ring Bayonet Seal 1139-061
4A 2 Backup Ring For Bayonet Seal 1140-061
5 1 O-Ring Shut-Off Seal 1139-057
5A 1 Backup Ring For Shut-Off Seal 1140-057
6 3 O-Ring Valve External Seal 1139-020
6A 3 Backup Ring For Valve External Seal 1140-020
7 2 O-Ring Tube End Seal 1139-300
7A 2 Backup Ring For Tube End Seal 1140-300
8 2 O-Ring Porting Tube Seal 1139-064
8A 2 Backup Ring For Porting Tube Seal 1140-064
9 2 O-Ring Valve Internal Seal 1139-016
9A 2 Backup Ring For Valve Internal Seal 1140-016
10 1 O-Ring Plug Seal 1138-003
11 2 O-Ring Plug Seal 1138-005
12 2 Polypak® Piston Rod Wiper 1147-133
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings and W iper Expander: Parker E-740-75 Parker V-747-75
W iper Outer Jacket: Parker E-4207-90 Parker V-4205-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952 Greene, Tweed 731
T-Seal Backup Rings Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1194
SEALS FOR E-SYSTEMS 70 KIP SNUBBERSReplaces Kit No. 152607
(Please refer to Figures 15A & 15B)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 T-Seal Reservoir Piston Seal2002-049
1A 2 Backup Ring For Reservoir Piston Seal
2 1 T-Seal Cylinder Piston Seal2001-062
2A 2 Backup Ring For Cylinder Piston Seal
3 2 T-Seal Piston Rod Seal2003-035
3A 4 Backup Ring For Piston Rod Seal
4 2 O-Ring Bayonet Seal 1139-061
4A 2 Backup Ring For Bayonet Seal 1140-061
5 1 O-Ring Shut-Off Seal 1139-057
5A 1 Backup Ring For Shut-Off Seal 1140-057
6 3 O-Ring Valve External Seal 1139-020
6A 3 Backup Ring For Valve External Seal 1140-020
7 2 O-Ring Tube End Seal 1139-307
7A 2 Backup Ring For Tube End Seal 1140-307
8 2 O-Ring Porting Tube Seal 1139-064
8A 2 Backup Ring For Porting Tube Seal 1140-064
9 2 O-Ring Valve Internal Seal 1139-016
9A 2 Backup Ring For Valve Internal Seal 1140-016
10 1 O-Ring Plug Seal 1138-003
11 2 O-Ring Plug Seal 1138-005
12 2 Polypak® Piston Rod Wiper 1147-139
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings and W iper Expander: Parker E-740-75 Parker V-747-75
W iper Outer Jacket: Parker E-4207-90 Parker V-4205-75
O-Ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952 Greene, Tweed 731
T-Seal BackUp Rings Nylon Nylon
LAKE ENGINEERING COMPANYSEAL KIT NO. 1195
SEALS FOR E-SYSTEMS 100 KIP SNUBBERSReplaces Kit No. 152610
(Please refer to Figures 15A & 15B)
(Available in Ethylene-Propylene and Viton)
Item No. Qty.
SealType Description
LECPartNo.
1 1 T-Seal Reservoir Piston Seal2002-049
1A 2 Backup Ring For Reservoir Piston Seal
2 1 T-Seal Cylinder Piston Seal2001-069
2A 2 Backup Ring For Cylinder Piston Seal
3 2 T-Seal Piston Rod Seal2003-043
3A 4 Backup Ring For Piston Rod Seal
4 2 O-Ring Bayonet Seal 1139-061
4A 2 Backup Ring For Bayonet Seal 1140-061
5 1 O-Ring Shut-Off Seal 1139-057
5A 1 Backup Ring For Shut-Off Seal 1140-057
6 3 O-Ring Valve External Seal 1139-020
6A 3 Backup Ring For Valve External Seal 1140-020
7 2 O-Ring Tube End Seal 1139-314
7A 2 Backup Ring For Tube End Seal 1140-314
8 2 O-Ring Porting Tube Seal 1139-064
8A 2 Backup Ring For Porting Tube Seal 1140-064
9 2 O-Ring Valve Internal Seal 1139-016
9A 2 Backup Ring For Valve Internal Seal 1140-016
10 1 O-Ring Plug Seal 1138-003
11 2 O-Ring Plug Seal 1138-005
12 2 Polypak® Piston Rod Wiper 1147-183
® Registered trade name of Parker Seal Co.
MATERIALS
DESCRIPTION EPR (ETHYLENE-PROPYLENE) FKM (VITON)
O-Rings and W iper Expander: Parker E-740-75 Parker V-747-75
W iper Outer Jacket: Parker E-4207-90 Parker V-4205-75
O-ring Backup Rings: Parker E-652-90 Parker V-709-90
T-Seals: Greene, Tweed E-952 Greene, Tweed 731
T-Seal Backup Rings Nylon Nylon