Embed Size (px)
DESCRIPTION
Labelmaster now offers a full Breadth of Hand Protection products. The products are from all of the top leading manufaturers and include all categories ranging from warehouse applications to Handling molten luiquids. If you have any quetions please call us at 1-800-621-5808
Citation preview
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
INFORMATION FOR YOUR SAFETY
US Regulatory Standards for Hand Protection
OSHA 29 CFR 1910.138(a) General requirements. Employers shall select and require employees to use appropriate hand protection when employees’ hands are exposed to hazards such as those from skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, and harmful temperature extremes.
1910.138 (b) Selection. Employers shall base the selection of the appropriate hand protection on an evaluation of the performance characteristics of the hand protection relative to the task(s) to be performed, conditions present, duration of use and the hazards and potential hazards identified.
ANSI/ISEA 105-2005American National Standard for Hand Protection Selection Criteria was developed to provide guidance for selecting the appropriate gloves that will protect workers and assist employers in compliance with OSHA regulations. This document cites test methods and classification levels for a variety of product characteristics. Glove performance and pass/fail criteria are included for the following hazardous exposures: cut, puncture and abrasion resistance; chemical permeation and degradation; detection of holes; and heat and flame resistance. The 2005 edition also includes selection criteria for vibration reduction and dexterity.
Glove XSmall Small Medium Large XLarge
Hand 6” - 7” 7” - 8” 8” - 9” 9” - 10” 10” - 11”
Sizing Chart
Knitwrist Safety Cuff Gauntlet Cuff Band Top
Slip-On Rolled Beaded Pinked or Serrated
Straight
131
Hand Protection Information
Glove Care and MaintenanceProper care and cleaning of gloves on a regular basis is essential in maintaining quality hand protection for employees. Effective care will increase savings by affording longer glove life. Cleaning and Washing - Most styles of gloves will perform better and last longer when they are cleaned regularly. Certain glove styles launder better than others. Consult a Sales Representative for assistance with your glove selection. Inspection - Daily inspections are recommended prior to wearing, to assure that no significant damage to either the inside or outside surface of the glove has occurred. Storage - Gloves should be stored in well-ventilated bins or shelves at normal room temperature free from direct sunlight.
How to Choose the Proper Glove SizeWearing properly sized gloves is as important as the glove you choose. First, measure the circumference of your hand as illustrated above, then compare it to the sizing chart and choose the correct size.
Cuff StylesKnitwrist Used to prevent dirt and debris from getting inside the glove. Keeps cold air out and warmth in by fitting under clothing sleeves.
Safety Cuff Is easy to remove in emergency situations and gives added protection to the forearm. Varies in length from 21⁄2” to 23⁄4”.
Gauntlet Cuff Has the same features as the safety cuff. The longer cuff offers greater protection to the upper wrist. Typically 41⁄2” or longer.
Band Top Light wrist protection. Allows air to circulate around hand.
Slip-On Has no cuff. Glove extends over cuff. Easy on-off used primarily in general purpose applications and on drivers gloves.
Rolled Beaded Cuff For increased protection from chemical droplets and increased cuff strength.
Pinked or Serrated Cuff Provides better gripping surface on edge for easier glove removal.
Straight Cuff Provides additional length in order to protect from chemical runoff.
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
INFORMATION FOR YOUR SAFETY
Disposable Gloves
132
Disposable Glove Information
Choosing Disposable Gloves
What amount of protection will employees need?Allergies...are any employees allergic to any glove materialsChemical Resistance...resistance varies with chemical concentration, glove thickness, temperature and length of exposure to chemicals
Barrier Properties...testing performed to indicate critical parameters such as AQL, elongation, tensile and modulusComfort and Fit...sizing, dexterity and grip
Before purchasing any glove, whether it is manufactured using latex, vinyl or nitrile, companies must assess a few factors:
Natural Rubber Latex (NRL)Natural Rubber Latex is a highly durable and flexible material that provides a high measure of barrier protection against pathogens and environmental contaminants. Natural rubber latex provides good resistance to numerous acids and ketones. It is the most elastic of the disposable glove materials and is inexpensive. Products containing natural rubber latex may cause allergic reactions in some individuals. Those using latex gloves who develop a rash, should stop using these gloves immediately. If you suspect that you may have an allergy related to the agents used to manufacture natural rubber latex gloves, consider powder-free or alternative synthetic glove materials such as nitrile, neoprene, or vinyl.
NeopreneChloroprene rubber is a synthetic material, extracted from petroleum, used in glove manufacturing. Neoprene provides good resistance to acids, bases, and oils but provides less resistance to abrasion and cuts than latex or nitrile materials. Neoprene is closest in fit and comfort to latex as a synthetic alternative for users who may be sensitive to latex allergies.
NitrileNitrile is a synthetic material, extracted from petroleum, used in glove manufacturing. It is noted for its resistance to bases, oils, greases and hydrocarbons, and provides an effective barrier from blood borne pathogens. Nitrile gloves offer improved abrasion, cut, and puncture resistance versus latex. The synthetic nitrile polymers which make up the gloves respond to your body temperature and essentially mold the gloves to the shape of your hand. Synthetic nitrile gloves provide a low cost alternative to latex for users who may be sensitive to latex.
VinylVinyl is a synthetic plastic material manufactured of Poly Vinyl Chloride (PVC). It has good resistance to acids and bases. Vinyl is the least expensive of the disposable glove materials in use today, however they provide a lower level of resistance to mechanical hazards such as abrasion, cuts, and punctures as vinyl is not as elastic or strong as other materials. Vinyl gloves are commonly used in applications for food service, food processing, light duty maintenance and clean-up, and laboratory testing (especially where resistance to acids is required).
Disposable Glove PropertiesAQL (Acceptable Quality Level) – The AQL is used to determine the pass/fail criteria for a select sample size. The lower the AQL number, the fewer the defects allowed for a lot acceptable to pass. The FDA specifies an AQL of 1.5 for surgical gloves, 2.5 for examination gloves and 4.0 or better for industrial grade gloves.
Chlorination – A process by which gloves are exposed to a chlorine solution followed by multiple washing and leeching processes. The chlorination process hardens the surface of a glove reducing tackiness and decreasing the surface friction of the glove thereby allowing it to be easily donned without powder. The chlorination process provides an added benefit by greatly reducing the level of soluble latex protein. Although infrequent, a poor chlorination process (including over-chlorination) can result in gloves with a decreased shelf life that are brittle and weak and may cause discoloring or strong odors.
Elongation – The percentage a glove can be stretched from its original length before it fails. A score of 600% indicates the glove stretched six times its initial length before breaking. Higher percentages indicate a highly elastic glove which can be a indication of improved comfort.
Mil – A unit of measure, one thousandth of an inch (0.001 inch) or approximately 0.0254 millimeter, used in reporting glove thickness. Most glove thicknesses are measured at the fingertip, palm, and cuff.
Modulus – The force required to stretch the material to a specific percentage of its original length. Typically measured at 300% and 500% elongation. Results measure the elasticity of the material. A lower modulus value means less hand fatigue, and therefore, a more comfortable glove when worn for extended periods.
Powdered – A USP grade absorbable powder coated on the surface of a glove designed to assist with easier donning.
Powder-Free – Gloves that have undergone a process of chlorination or that have been polymer coated to eliminate the residue from the surface of a glove.
Polymer Coating – A coating of a special polymer resin applied to the inside and outside of the glove to seal the surface and provide a lubricant for donning the glove without the need for powder.
Tensile – The force measured over a cross-sectional area of a given material under strain. The value is usually measured at the instant the material fails and is reported in mega pascals (MPa).
Textured – The raised or uneven surface of a glove that helps to prevent slippage especially when handling wet objects. Texturing can be found in the fingertips or the complete glove.
A-C
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
Space
F. HIGH FIVE® E-GRIP® MAX Powder-Free Latex Exam GlovesPowder-free exam grade latex glovesUltra-durable gloves have added thickness for extra protectionNatural color with fully textured fingers offer enhanced gripping power in every situation Beaded cuff for easy donning510K approved for medical use
Glove Profile: 9.5” Length, 6.0 mil Cuff Thickness, 7.0 mil Palm Thickness, 8.0 mil Finger Thickness. Sold per dispenser boxPart Number Description Size Packaged PriceHF2L921 E-GRIP® MAX Small 100/bx 14.01 HF2L922 E-GRIP® MAX Medium 100/bx 14.01 HF2L923 E-GRIP® MAX Large 100/bx 14.01 HF2L924 E-GRIP® MAX XLarge 100/bx 14.01
CAUTION: Products containing natural rubber latex may cause allergic reactions in some individuals.
133
Disposable Latex Gloves
FE
D
A. Radnor® Disposable Industrial Latex Gloves91⁄2”, 5 mil disposable latex gloves are ambidextrous with a rolled cuffSelect from lightly powdered or powder-free styles, both available with smooth or textured finishNot for use in medical applicationsSold per dispenser boxMeet FFDCA requirements for food contact
Part Number Description Size Packaged PriceRAD64057880 5 mil, Powdered, Textured Small 100/bx 7.51 RAD64057881 5 mil, Powdered, Textured Medium 100/bx 7.51 RAD64057882 5 mil, Powdered, Textured Large 100/bx 7.51 RAD64057883 5 mil, Powdered, Textured XLarge 100/bx 7.51RAD64057884 5 mil, Powder-Free, Textured Small 100/bx 8.82 RAD64057885 5 mil, Powder-Free, Textured Medium 100/bx 8.82 RAD64057886 5 mil, Powder-Free, Textured Large 100/bx 8.82 RAD64057887 5 mil, Powder-Free, Textured XLarge 100/bx 8.82RAD64056461 5 mil, Powdered, Smooth Small 100/bx 7.51 RAD64056462 5 mil, Powdered, Smooth Medium 100/bx 7.51 RAD64056463 5 mil, Powdered, Smooth Large 100/bx 7.51 RAD64056464 5 mil, Powdered, Smooth XLarge 100/bx 7.51RAD64056466 5 mil, Powder-Free, Smooth Small 100/bx 8.82 RAD64056467 5 mil, Powder-Free, Smooth Medium 100/bx 8.82 RAD64056468 5 mil, Powder-Free, Smooth Large 100/bx 8.82 RAD64056469 5 mil, Powder-Free, Smooth XLarge 100/bx 8.82 B. Radnor® Disposable Medical Grade Latex Exam Gloves
Disposable latex exam gloves are processed to reduce levels of natural rubber latex proteins91⁄2”, 5 mil disposable latex exam gloves are ambidextrous Available lightly powdered with smooth finish, or powder-free with fully textured finish and rolled cuff Meet FFDCA requirements for food contactAcceptable for use in medical applicationsSold per dispenser box
Part Number Description Size Packaged PriceRAD64057892 5 mil Latex Exam, Lightly Powdered Small 100/bx 9.22 RAD64057893 5 mil Latex Exam, Lightly Powdered Medium 100/bx 9.22 RAD64057894 5 mil Latex Exam, Lightly Powdered Large 100/bx 9.22 RAD64057895 5 mil Latex Exam, Lightly Powdered XLarge 100/bx 9.22RAD64057896 5 mil Latex Exam, Powder-Free Small 100/bx 10.45 RAD64057897 5 mil Latex Exam, Powder-Free Medium 100/bx 10.45 RAD64057898 5 mil Latex Exam, Powder-Free Large 100/bx 10.45 RAD64057899 5 mil Latex Exam, Powder-Free XLarge 100/bx 10.45 C. Radnor® Disposable Medical Grade Latex Exam Gloves with Extended Cuff
Disposable latex exam gloves are processed to reduce levels of natural rubber latex proteins 12”, 11 mil disposable latex exam gloves are ambidextrousPowder-free with fully textured finish and rolled cuffMeet FFDCA requirements for food contactAcceptable for use in medical applicationsMeet the emergency medical glove requirements of NFPA 1999: Standard on Protective Clothing for Emergency Medical Operations, 2003 EditionSold per dispenser box
Part Number Description Size Packaged PriceRAD64057888 11 mil Latex Exam, Powder-Free Small 50/bx 17.31 RAD64057889 11 mil Latex Exam, Powder-Free Medium 50/bx 17.31 RAD64057890 11 mil Latex Exam, Powder-Free Large 50/bx 17.31 RAD64057891 11 mil Latex Exam, Powder-Free XLarge 50/bx 17.31
D. Best® Derma Thin® Rubber GlovesErgonomically designed, tactile sensitive, 5 mil, 91⁄2” length with a rolled cuff100% natural rubber compoundOutstanding strength surpasses similar-gauge natural rubber and vinyl glovesAmbidextrousLightly powderedSold per dispenser box
Part Number Description Size Packaged PriceB131005M Derma Thin®, Green Medium (7-8) 100/bx 14.62 B131005L Derma Thin®, Green Large (8-9) 100/bx 14.62
E. HIGH FIVE® E-GRIP® Powder-Free Latex Exam GlovesPowder-free exam grade latex glovesNatural color with micro-textured satin finish provides enhanced gripping power and excellent tactile sensitivityBeaded cuff for easy donning510K approved for medical use
Glove Profile: 9.5” Length, 4.0 mil Cuff Thickness, 5.0 mil Palm Thickness, 6.0 mil Finger Thickness. Sold per dispenser boxPart Number Description Size Packaged PriceHF2L971 E-GRIP® Small 100/bx 10.80 HF2L972 E-GRIP® Medium 100/bx 10.80 HF2L973 E-GRIP® Large 100/bx 10.80 HF2L974 E-GRIP® XLarge 100/bx 10.80
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
134
Disposable Latex Gloves
A
E
D
B
C
A. Black Dragon® Powder-Free Latex Exam GlovesCombination of comfort and strength in a distinct black latex gloveEasy to slip on and the fully textured surface gives a better and more secure grip on tools and equipmentBlack color provides better framing effect and color definition and eliminates distractions from stains and coloring on the gloveManufactured under ISO 13485 quality system and are lab and field tested to meet or exceed stringent ASTM criterion to withstand pinhole defects
Glove Profile: Length 9.6”, Cuff Thickness 3.9 mil, Palm Thickness 4.7 mil, Finger Thickness 5.1 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRBD-1000-PFXS Black Dragon® XSmall 100/bx 14.37 MCRBD-1001-PF-S Black Dragon® Small 100/bx 14.37 MCRBD-1002-PF-M Black Dragon® Medium 100/bx 14.37 MCRBD-1003-PF-L Black Dragon® Large 100/bx 14.37 MCRBD-1004-PFXL Black Dragon® XLarge 100/bx 14.37
B. ColorTouch® Pink Latex Exam GlovesSupport The Breast Cancer Research Foundation® in their search for a cure to breast cancerPowder-free premium latexPolymer-coated for easy donningFully textured for more secure gripRelaxed comfort for reduced hand fatigue
Glove Profile: Length 9.6”, Cuff Thickness 3.9 mil, Palm Thickness 5.9 mil, Finger Thickness 6.7 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRCTP-233-XS ColorTouch® Pink XSmall 100/bx 13.34 MCRCTP-233-S ColorTouch® Pink Small 100/bx 13.34 MCRCTP-233-M ColorTouch® Pink Medium 100/bx 13.34 MCRCTP-233-L ColorTouch® Pink Large 100/bx 13.34
C. Ultra One® Powder-Free Latex Exam GlovesStrong, durable and comfortable Powder-free, 100% natural latexExtended beaded cuff for increased protection over the wrist and forearmTextured fingers for a secure grip in wet or dry conditionsMedical exam gradeExceed proposed FDA and current ASTM standards for quality and performance
Glove Profile: Length 11.8”, Cuff Thickness 6.7 mil, Palm Thickness 9.8 mil, Finger Thickness 11.8 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRUL-315-S Ultra One® Small 50/bx 18.26 MCRUL-315-M Ultra One® Medium 50/bx 18.26 MCRUL-315-L Ultra One® Large 50/bx 18.26 MCRUL-315-XL Ultra One® XLarge 50/bx 18.26
D. SafeGrip® Powder-Free Latex Exam GlovesProvide extra protection in extreme environmentsLow modulus profile allows for a comfortable fitOutstanding tensile strength for extraordinary durabilityGreater thickness at the fingertips, over five times the ASTM standardPowder-free, 100% natural latexExtended beaded cuff for increased protection over the wrist and forearmTextured fingers for a secure grip in wet or dry conditionsMedical exam grade
Glove Profile: Length 11.6”, Cuff Thickness 7.9 mil, Palm Thickness 11 mil, Finger Thickness 14.2 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRSG-375-S SafeGrip® Small 50/bx 19.81 MCRSG-375-M SafeGrip® Medium 50/bx 19.81 MCRSG-375-L SafeGrip® Large 50/bx 19.81 MCRSG-375-XL SafeGrip® XLarge 50/bx 19.81
E. Synetron® Powder-Free Extended Cuff Latex Exam GlovesProven protection and tactile sensitivity for high-risk professionalsFully textured and polymer coatedPowder-free, 100% natural latexExtended beaded cuff for increased protection over the wrist and forearmMedical exam grade
Glove Profile: Length 11.4”, Cuff Thickness 6.7 mil, Palm Thickness 9.1 mil, Finger Thickness 11.8 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRSY-911-S Synetron® Small 50/bx 19.09 MCRSY-911-M Synetron® Medium 50/bx 19.09 MCRSY-911-L Synetron® Large 50/bx 19.09 MCRSY-911-XL Synetron® XLarge 50/bx 19.09 MCRSY-911-XXL Synetron® 2XLarge 50/bx 19.09
A
E
D
B
C
E
CAUTION: These products contain natural rubber latex which may cause allergic reactions. Safe use of these gloves by or on latex sensitized individuals has not been established.
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A. Evolution One® Powder-Free Latex Exam GlovesPremium powder-free, natural rubber latex glovesPolymer coating to allow ease of donning in wet or dry conditionsFully textured for secure gripLonger beaded cuff provides extra protection for wrist and forearm Medical exam grade
Glove Profile: Length 9.6”, Cuff Thickness 3.9 mil, Palm Thickness 5.5 mil, and Finger Thickness 5.9 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCREV-2050-XS Evolution One® XSmall 100/bx 16.81 MCREV-2050-S Evolution One® Small 100/bx 16.81 MCREV-2050-M Evolution One® Medium 100/bx 16.81 MCREV-2050-L Evolution One® Large 100/bx 16.81 MCREV-2050-XL Evolution One® XLarge 100/bx 16.81
B. Diamond Grip™ Powder-Free Latex Exam GlovesComfortable, durable latex exam glovesTextured fingers for superior grip in wet or dry conditionsPowder-freeMedical exam grade
Glove Profile: Length 9.6”, Cuff Thickness 5.1 mil, Palm Thickness 6.3 mil, Finger Thickness 7.9 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRMF-300-XS Diamond Grip™ XSmall 100/bx 17.17 MCRMF-300-S Diamond Grip™ Small 100/bx 17.17 MCRMF-300-M Diamond Grip™ Medium 100/bx 17.17 MCRMF-300-L Diamond Grip™ Large 100/bx 17.17 MCRMF-300-XL Diamond Grip™ XLarge 100/bx 17.17
C. Diamond Grip Plus™ Powder-Free Latex Exam GlovesGreat combination of comfort and durabilityTextured for superior grip in wet or dry conditionsPowder-freeMedical exam grade
Glove Profile: Length 9.6”, Cuff Thickness 3.9 mil, Palm Thickness 5.1 mil, Finger Thickness 6.3 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRDGP-350-XS Diamond Grip Plus™ XSmall 100/bx 15.21 MCRDGP-350-S Diamond Grip Plus™ Small 100/bx 15.21 MCRDGP-350-M Diamond Grip Plus™ Medium 100/bx 15.21 MCRDGP-350-L Diamond Grip Plus™ Large 100/bx 15.21 MCRDGP-350-XL Diamond Grip Plus™ XLarge 100/bx 15.21
D. ComfortGrip® Powder-Free Latex Exam GlovesComfortable, low-protein latex glovesPowder-freeMedical exam grade
Glove Profile: Length 9.6”, Cuff Thickness 3.9 mil, Palm Thickness 5.1 mil, Finger Thickness 5.9 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRCFG-900-S ComfortGrip® Small 100/bx 13.30 MCRCFG-900-M ComfortGrip® Medium 100/bx 13.30 MCRCFG-900-L ComfortGrip® Large 100/bx 13.30 MCRCFG-900-XL ComfortGrip® XLarge 100/bx 13.30
E. Micro One® Lightly-Powdered Latex Exam GlovesSmooth surface ensures excellent tactile sensitivity, and a light cornstarch (USP) powdering enables easy donningAmbidextrous, gloves are whiteThicker and longer than typical latex examination gloves, non-sterileMedical exam grade
Glove Profile: Length 9.6”, Cuff Thickness 3.9 mil, Palm Thickness 5.5 mil, Finger Thickness 6.3 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRMO-150-XS Micro One® XSmall 100/bx 11.08 MCRMO-150-S Micro One® Small 100/bx 11.08 MCRMO-150-M Micro One® Medium 100/bx 11.08 MCRMO-150-L Micro One® Large 100/bx 11.08 MCRMO-150-XL Micro One® XLarge 100/bx 11.08
135
Disposable Latex Gloves
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
D
B
C
E
137
Disposable Nitrile Gloves
E. N-DEX® Free Accelerator-Free Nitrile Disposable GlovesPatented 100% accelerator-free nitrile formulationFree from natural rubber latex and Type I allergic reactions linked to latex proteins91⁄2” length, 4 mil, powder-freeHi-viz green color with textured finger tips and rolled cuffClass 1 Medical Device
In compliance with 21CFR, Parts 170-199, NFPA 1999 CompliantPart Number Description Size Packaged PriceB137705PFTS N-DEX® Free Small 100/bx 16.23 B137705PFTM N-DEX® Free Medium 100/bx 16.23 B137705PFTL N-DEX® Free Large 100/bx 16.23 B137705PFTXL N-DEX® Free XLarge 100/bx 16.23
A. N-DEX® Original Nitrile Disposable GlovesBlue nitrile gloves provide greater chemical and puncture resistance than natural latex and vinyl disposables of comparable thickness and are cooler and drier91⁄2” length, 4 mil, lightly powdered or powder-free stylesAmbidextrous with smooth grip and rolled cuffPatented low modulus formulation provides maximum comfortContain no latex proteins
In compliance with 21 CFR, parts 170-199Part Number Description Size Packaged PriceB137005S N-DEX® Original Small 100/bx 15.09 B137005M N-DEX® Original Medium 100/bx 15.09 B137005L N-DEX® Original Large 100/bx 15.09 B137005XL N-DEX® Original XLarge 100/bx 15.09 B137005XXL N-DEX® Original 2XLarge 100/bx 15.09B137005PFS N-DEX® Original Powder-Free Small 100/bx 15.75 B137005PFM N-DEX® Original Powder-Free Medium 100/bx 15.75 B137005PFL N-DEX® Original Powder-Free Large 100/bx 15.75 B137005PFXL N-DEX® Original Powder-Free XLarge 100/bx 15.75 B137005PFXXL N-DEX® Original Powder-Free 2XLarge 100/bx 15.75
B. Best® Nitrile GlovesEconomy grade 100% nitrile gloves are powder-free and 91⁄2” in length with a rolled cuffLightly pebbled grip on 4 mil gloves, smooth texture on 8 mil glovesSilicone-freeIn compliance with 21CFR, parts 170-199
Part Number Description Size Packaged PriceB137500PFS Best® Nitrile, 4 mil Small 100/bx 11.79 B137500PFM Best® Nitrile, 4 mil Medium 100/bx 11.79 B137500PFL Best® Nitrile, 4 mil Large 100/bx 11.79 B137500PFXL Best® Nitrile, 4 mil XLarge 100/bx 11.79 B137500PFXXL Best® Nitrile, 4 mil 2XLarge 100/bx 11.79B138500PFS Best® Nitrile, 8 mil Small 50/bx 13.11 B138500PFM Best® Nitrile, 8 mil Medium 50/bx 13.11 B138500PFL Best® Nitrile, 8 mil Large 50/bx 13.11 B138500PFXL Best® Nitrile, 8 mil XLarge 50/bx 13.11
C. N-DEX® Plus and Nitrile Disposable GlovesBlue nitrile gloves provide greater chemical and puncture resistance than natural latex and vinyl disposables of comparable thickness and are cooler and drier91⁄2” length, 8 mil, available in powder or powder-freeAmbidextrous with smooth grip and rolled cuffPatented low modulus formulation provides maximum comfortContain no latex proteins
In compliance with 21 CFR, parts 170-1998005PF is NFPA 1999 Compliant
Part Number Description Size Packaged PriceB138005S N-DEX® Plus, Lightly Powdered Small 50/bx 17.36 B138005M N-DEX® Plus, Lightly Powdered Medium 50/bx 17.36 B138005L N-DEX® Plus, Lightly Powdered Large 50/bx 17.36 B138005XL N-DEX® Plus, Lightly Powdered XLarge 50/bx 17.36B138005PFS N-DEX® Plus, Powder-Free Small 50/bx 17.55 B138005PFM N-DEX® Plus, Powder-Free Medium 50/bx 17.55 B138005PFL N-DEX® Plus, Powder-Free Large 50/bx 17.55 B138005PFXL N-DEX® Plus, Powder-Free XLarge 50/bx 17.55
D. N-DEX® NightHawk® Accelerator-Free Nitrile Disposable Gloves
Patented 100% accelerator-free nitrile formulation offers the world’s least allergenic disposable protection Impressive ESD, and static-dissipative properties91⁄2” length, 4 mil, powder-freeStealth black color with textured fingertips and rolled cuffPerfect for workers in automotive, electronic assembly, laboratory, law enforcement and security environments
In compliance with 21CFR, parts 170-199Part Number Description Size Packaged PriceB137700PFTS N-DEX® NightHawk® Small 50/bx 8.49 B137700PFTM N-DEX® NightHawk® Medium 50/bx 8.49 B137700PFTL N-DEX® NightHawk® Large 50/bx 8.49 B137700PFTXL N-DEX® NightHawk® XLarge 50/bx 8.49
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
138
Disposable Nitrile Gloves
RAD64056428
RAD64057295
d an
d Fa
ce
otec
tion A
CB
D
E
B. Best® N-DEX® Original Powder-Free Nitrile Exam Gloves100% nitrile, powder-free, 4 mil thick and 91⁄2” in length with a rolled cuffSmooth grip, patented low-modulus formulation
Class 1 Medical Device. Meets OSHA guidelines for handling bloodborne pathogensIn compliance with 21CFR Parts 170-199, NFPA 1999 Compliant
Part Number Description Size Packaged PriceB136005PFS N-DEX® #6005PF Small 100/bx 16.23 B136005PFM N-DEX® #6005PF Medium 100/bx 16.23 B136005PFL N-DEX® #6005PF Large 100/bx 16.23 B136005PFXL N-DEX® #6005PF XLarge 100/bx 16.23
C. Best® N-DEX® Ultimat e Powder-Free Nitrile Exam Gloves100% nitrile, powder-free, 6 mil thick and 11” in length with a rolled cuff Smooth grip, Patented low-modulus formulationClass 1 Medical Device
In compliance with 21CFR Parts 170-199, NFPA 1999 CompliantPart Number Description Size Packaged PriceB139905PFS N-DEX® #9905PF Small 50/bx 15.94 B139905PFM N-DEX® #9905PF Medium 50/bx 15.94 B139905PFL N-DEX® #9905PF Large 50/bx 15.94 B139905PFXL N-DEX® #9905PF XLarge 50/bx 15.94
D. KIMBERLY-CLARK* PURPLE NITRILE* and PURPLE NITRILE-XTRA* Exam Gloves
Unique purple color provides quick physical differentiation from natural rubber latex and other syntheticsContain no natural rubber latexPowder-free exam gloves have textured fingertipsAvailable in 91⁄2” or 12” length with beaded cuff
Glove Profile: 5.9 mil Finger Thickness, 4 mil Palm Thickness, 3.5 mil Cuff Thickness. Sold per dispenser boxPart Number Description Size Packaged PriceK4555081 91⁄2” PURPLE NITRILE* Small 100/bx 17.32 K4555082 91⁄2” PURPLE NITRILE* Medium 100/bx 17.32 K4555083 91⁄2” PURPLE NITRILE* Large 100/bx 17.32 K4555084 91⁄2” PURPLE NITRILE* XLarge 90/bx 17.32K4550601 12” PURPLE NITRILE-XTRA* Small 50/bx 14.96 K4550602 12” PURPLE NITRILE-XTRA* Medium 50/bx 14.96 K4550603 12” PURPLE NITRILE-XTRA* Large 50/bx 14.96 K4550604 12” PURPLE NITRILE-XTRA* XLarge 50/bx 14.96
E. Radnor® Disposable Powder-Free Nitrile Exam GlovesDisposable nitrile exam gloves are three times more puncture resistant than latex gloves of the same thicknessGloves contain no natural rubber latex that may irritate skinPowder-free, textured exam gloves comply with FFDCA requirements for food contactAcceptable for use in medical applicationsChoose from 91⁄2” 5 mil or 12” extended cuff 8 mil gloves
Part Number Description Size Packaged PriceRAD64056426 5 mil Nitrile Exam, Powder-Free Small 100/bx 11.22 RAD64056427 5 mil Nitrile Exam, Powder-Free Medium 100/bx 11.22 RAD64056428 5 mil Nitrile Exam, Powder-Free Large 100/bx 11.22 RAD64056429 5 mil Nitrile Exam, Powder-Free XLarge 100/bx 11.22RAD64057293 8 mil Nitrile Exam, Powder-Free Small 50/bx 11.33 RAD64057294 8 mil Nitrile Exam, Powder-Free Medium 50/bx 11.33 RAD64057295 8 mil Nitrile Exam, Powder-Free Large 50/bx 11.33 RAD64057296 8 mil Nitrile Exam, Powder-Free XLarge 50/bx 11.33
A. Best® N-DEX® BWC™ (Because We Care) Nitrile Powder-Free Exam Gloves
Show your support for cancer survivors 100% nitrile, non-latex powder-free medical grade 9.5” long, 4 mil thick with textured fingertipsClass 1 Medical Device
In compliance 21 CFR, Parts 170-199, NFPA 1999 Compliant
Part Number Description Size Packaged PriceB136205PFS N-DEX® BWC™ #6205PF Small 100/bx 16.32 B136205PFM N-DEX® BWC™ #6205PF Medium 100/bx 16.32 B136205PFL N-DEX® BWC™ #6205PF Large 100/bx 16.32 B136205PFXL N-DEX® BWC™ #6205PF XLarge 100/bx 16.32
A. UltraSense® and UltraSense® EC Nitrile GlovesSoft yet durable100% Synthetic nitrile, to alleviate potential adverse reactions associated with latex proteinPatented nitrile formulation provides excellent fit, feel and comfortPowder-free ultra soft nitrile allows a comfortable grip and reduces hand fatigue and stressMedical exam gradeAvailable in standard or extended cuff length
UltraSense® Glove Profile: Length 9.5”, Cuff Thickness 2.8 mil, Palm Thickness 3.1 mil, Finger Thickness 4.3 mil. Sold per dispenser box.Part Number Description Size Packaged PriceMCRUS-220-XS UltraSense® XSmall 100/bx 14.15 MCRUS-220-S UltraSense® Small 100/bx 14.15 MCRUS-220-M UltraSense® Medium 100/bx 14.15 MCRUS-220-L UltraSense® Large 100/bx 14.15 MCRUS-220-XL UltraSense® XLarge 100/bx 14.15UltraSense® EC Glove Profile: Length 11.4”, Cuff Thickness 2.8 mil, Palm Thickness 3.1 mil, Finger Thickness 4.3 mil. Sold per dispenser box. MCRUSE-880-S UltraSense® EC Small 100/bx 18.70 MCRUSE-880-M UltraSense® EC Medium 100/bx 18.70 MCRUSE-880-L UltraSense® EC Large 100/bx 18.70 MCRUSE-880-XL UltraSense® EC XLarge 100/bx 18.70 MCRUSE-880-XXL UltraSense® EC 2XLarge 100/bx 18.70
B. FreeForm® SE and FreeForm® EC Nitrile GlovesOffer greater comfort and increased manual dexterity for performance during the most intricate work 100% Synthetic nitrile, to alleviate potential adverse reactions associated with latex proteinPolymer coating offers ease of donningContinuously forms to the contours of your hands to minimize hand fatigue and stressMedical exam gradeAvailable in standard or extended cuff length
FreeForm® SE Glove Profile: Length 9.6”, Cuff Thickness 2.8 mil, Palm Thickness 3.5 mil, Finger Thickness 5.1 mil. Sold per dispenser box.Part Number Description Size Packaged PriceMCRFFS-700-XS FreeForm® SE XSmall 100/bx 16.06 MCRFFS-700-S FreeForm® SE Small 100/bx 16.06 MCRFFS-700-M FreeForm® SE Medium 100/bx 16.06 MCRFFS-700-L FreeForm® SE Large 100/bx 16.06 MCRFFS-700-XL FreeForm® SE XLarge 100/bx 16.06FreeForm® EC Glove Profile: Length 11.4”, Cuff Thickness 3.5 mil, Palm Thickness 4.7 mil, Finger Thickness 6.3 mil. Sold per dispenser box. MCRFFE-775-S FreeForm® EC Small 50/bx 14.83 MCRFFE-775-M FreeForm® EC Medium 50/bx 14.83 MCRFFE-775-L FreeForm® EC Large 50/bx 14.83 MCRFFE-775-XL FreeForm® EC XLarge 50/bx 14.83 MCRFFE-775-XXL FreeForm® EC 2XLarge 50/bx 14.83
C. Supreno® SE and Supreno® EC Nitrile Gloves100% Synthetic nitrile to alleviate possible allergic reactions associated with natural latex proteinDurable nitrile formulationTextured fingers to allow for reliable grip in wet or dry conditionsInterior polymer coating for ease of donningMedical exam gradeAvailable in standard or extended cuff length
Supreno® SE Glove Profile: Length 9.6”, Cuff Thickness 3.9 mil, Palm Thickness 4.7 mil, Finger Thickness 7.1 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRSU-690-XS Supreno® SE XSmall 100/bx 16.04 MCRSU-690-S Supreno® SE Small 100/bx 16.04 MCRSU-690-M Supreno® SE Medium 100/bx 16.04 MCRSU-690-L Supreno® SE Large 100/bx 16.04 MCRSU-690-XL Supreno® SE XLarge 100/bx 16.04
Supreno® EC Glove Profile: Length 11.6”, Cuff Thickness 4.3 mil, Palm Thickness 5.5 mil, Finger Thickness 7.9 mil. Sold per dispenser box MCRSEC-375-S Supreno® EC Small 50/bx 13.02 MCRSEC-375-M Supreno® EC Medium 50/bx 13.02 MCRSEC-375-L Supreno® EC Large 50/bx 13.02 MCRSEC-375-XL Supreno® EC XLarge 50/bx 13.02 MCRSEC-375-XXL Supreno® EC 2XLarge 50/bx 13.02
All gloves shown here are latex free.
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
C
B
139
Disposable Nitrile Gloves
A. Microflex® XCEED™ Powder-Free Nitrile Exam GlovesThe 1st Certified Ergonomic Examination GloveDeliver industry leading comfort and protectionXCEED™ Gloves markedly reduce muscle exertion in a comprehensive studyMade with Avantex™, a proprietary formulation, XCEED™ delivers comfort that rivals the fit and feel of latex while providing up to 60% more strength and more protection than leading brandsValue packed at 250 gloves per box saving money and is better for the environment
Glove Profile: Length 9.3”, Cuff Thickness 2.4 mil, Palm Thickness 2.8 mil, Finger Thickness 4.3 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRXC-310-XS XCEED™ XSmall 250/bx 24.21 MCRXC-310-S XCEED™ Small 250/bx 24.21 MCRXC-310-M XCEED™ Medium 250/bx 24.21 MCRXC-310-L XCEED™ Large 250/bx 24.21 MCRXC-310-XL XCEED™ XLarge 250/bx 24.21
B. Microflex® MidKnight™ Powder-Free Nitrile Exam GlovesBlack powder-free nitrileFully textured with beaded cuff (2XL size textured only in fingertips)Designed specifically with a distinct color that masks stains
Glove Profile: Length 9.6”, Cuff Thickness 3.1 mil, Palm Thickness 4.7 mil, Finger Thickness 5.5 mil. Sold per compact dispenser boxPart Number Description Size Packaged PriceMCRMK-296-S MidKnight™ Small 100/bx 15.57 MCRMK-296-M MidKnight™ Medium 100/bx 15.57 MCRMK-296-L MidKnight™ Large 100/bx 15.57 MCRMK-296-XL MidKnight™ XLarge 100/bx 15.57 MCRMK-296-XXL MidKnight™ 2XLarge 100/bx 15.57
C. Microflex® Dura Flock™ Flock-Lined Nitrile Industrial GlovesPowder-free 8 mil dark green 100% nitrileUltra-thin moisture absorbing flock-lining keeps hands dryFully textured for a firm, reliable gripComfortable to wear for extended periods reducing hand fatigue Beaded cuff
Glove Profile: Length 10.6”, Cuff Thickness 5.9 mil, Palm Thickness 8.3 mil, Finger Thickness 7.9 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRDFK-608-S Dura Flock™ Small 50/bx 20.72 MCRDFK-608-M Dura Flock™ Medium 50/bx 20.72 MCRDFK-608-L Dura Flock™ Large 50/bx 20.72 MCRDFK-608-XL Dura Flock™ XLarge 50/bx 20.72 MCRDFK-608-XXL Dura Flock™ 2XLarge 50/bx 20.72
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
140
Disposable Nitrile GlovesA
D
B
C
F. HIGH FIVE® ONYX® Nitrile Exam Gloves Powder-free nitrile gloves - 100% latex-freeBlack color hides dirt and stains, ideal for work areas where the jobs get messyMedical grade protection in a glove designed for industrial workThe nitrile construction with textured finish offers chemical resistance and a great grip
Glove Profile: 9.5” Length, 3.1 mil Cuff Thickness, 4.7 mil Palm Thickness, 5.5 mil Finger Thickness. Sold per dispenser boxPart Number Description Size Packaged PriceHF2N641 ONYX® Small 100/bx 10.57 HF2N642 ONYX® Medium 100/bx 10.57 HF2N643 ONYX® Large 100/bx 10.57 HF2N644 ONYX® XLarge 100/bx 10.57
E F
D. HIGH FIVE® A+ ALOE® Nitrile Exam Gloves
Powder-free, latex-free medical exam grade nitrile glovesGreen color with a fully textured finish for a great gripAloe coating protects hands from drying, chapping or crackingNo gel or residue involved
Glove Profile: 9.5” Length, 5.5 mil Cuff Thickness, 5.5 mil Palm Thickness, 6.0 mil Finger Thickness. Sold per dispenser boxPart Number Description Size Packaged PriceHF2N881-10 A+ ALOE® Small 100/bx 15.28 HF2N882-10 A+ ALOE® Medium 100/bx 15.28 HF2N883-10 A+ ALOE® Large 100/bx 15.28 HF2N884-10 A+ ALOE® XLarge 100/bx 15.28 HF2N885-10 A+ ALOE® 2XLarge 100/bx 15.28
E. HIGH FIVE® COBALT® Nitrile Exam Gloves Powder-free, medical exam grade nitrile gloves - 100% latex freeCobalt blue coloring is ideal for color coded applications Soft and stretchy with exceptional durabilityFully textured surface for enhanced gripping in wet or dry conditionsIdeal for jobs requiring exceptional tactile sensitivity
Glove Profile: 9.5” Length, 4.0 mil Cuff Thickness, 4.0 mil Palm Thickness, 4.5 mil Finger Thickness. Sold per dispenser boxPart Number Description Size Packaged PriceHF2N191 COBALT® Small 100/bx 10.66 HF2N192 COBALT® Medium 100/bx 10.66 HF2N193 COBALT® Large 100/bx 10.66 HF2N194 COBALT® XLarge 100/bx 10.66
D
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
B
C
141
Disposable Vinyl Gloves
A. Radnor® Disposable Vinyl Gloves Available in multiple mil thicknesses to balance your needs for durability and costOffer excellent dexterity and tactile sensitivityNot for medical useComply with FFDCA requirements for food handlingSold per dispenser box
Part Number Description Size Packaged PriceRAD64057741 3.5 mil Vinyl, Lightly Powdered, Clear Small 100/bx 4.57 RAD64057742 3.5 mil Vinyl, Lightly Powdered, Clear Medium 100/bx 4.57 RAD64057743 3.5 mil Vinyl, Lightly Powdered, Clear Large 100/bx 4.57 RAD64057744 3.5 mil Vinyl, Lightly Powdered, Clear XLarge 100/bx 4.57RAD64057746 3.5 mil Vinyl, Powder-Free, Clear Small 100/bx 4.84 RAD64057747 3.5 mil Vinyl, Powder-Free, Clear Medium 100/bx 4.84 RAD64057748 3.5 mil Vinyl, Powder-Free, Clear Large 100/bx 4.84 RAD64057749 3.5 mil Vinyl, Powder-Free, Clear XLarge 100/bx 4.84RAD64057710 5 mil Vinyl, Lightly Powdered, Clear Small 100/bx 5.24 RAD64057711 5 mil Vinyl, Lightly Powdered, Clear Medium 100/bx 5.24 RAD64057712 5 mil Vinyl, Lightly Powdered, Clear Large 100/bx 5.24 RAD64057713 5 mil Vinyl, Lightly Powdered, Clear XLarge 100/bx 5.24RAD64057700 5 mil Vinyl, Lightly Powdered, Blue Small 100/bx 5.35 RAD64057701 5 mil Vinyl, Lightly Powdered, Blue Medium 100/bx 5.35 RAD64057702 5 mil Vinyl, Lightly Powdered, Blue Large 100/bx 5.35 RAD64057703 5 mil Vinyl, Lightly Powdered, Blue XLarge 100/bx 5.35RAD64057705 5 mil Vinyl, Powder-Free, Clear Small 100/bx 5.47 RAD64057706 5 mil Vinyl, Powder-Free, Clear Medium 100/bx 5.47 RAD64057707 5 mil Vinyl, Powder-Free, Clear Large 100/bx 5.47 RAD64057708 5 mil Vinyl, Powder-Free, Clear XLarge 100/bx 5.47RAD64057716 6.5 mil Vinyl, Lightly Powdered, Green Medium 100/bx 10.76 RAD64057717 6.5 mil Vinyl, Lightly Powdered, Green Large 100/bx 10.76 RAD64057718 6.5 mil Vinyl, Lightly Powdered, Green XLarge 100/bx 10.76
B. Radnor® Disposable Vinyl Exam Gloves5 mil lightly powdered and has a smooth finishComply with FFDCA requirements for food handling and are acceptable for use in medical applicationsAmbidextrousSold per dispenser box
Part Number Description Size Packaged PriceRAD64057720 5 mil, Vinyl Exam, Lightly Powdered Small 100/bx 6.06 RAD64057721 5 mil, Vinyl Exam, Lightly Powdered Medium 100/bx 6.06 RAD64057722 5 mil, Vinyl Exam, Lightly Powdered Large 100/bx 6.06 RAD64057723 5 mil, Vinyl Exam, Lightly Powdered XLarge 100/bx 6.06
C. Microflex® Derma Free® Powder-Free Vinyl Exam GlovesThicker than typical vinyl gloves and have smooth surface allowing for more natural tactile sensitivityNon-sterile, ambidextrous with beaded cuff Medical grade exam gloves
Glove Profile: Length 9.1”, Cuff Thickness 2.0 mil, Palm Thickness 3.1 mil, Finger Thickness 2.0 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRDF-850-S Derma Free® Powder-Free Small 100/bx 7.34 MCRDF-850-M Derma Free® Powder-Free Medium 100/bx 7.34 MCRDF-850-L Derma Free® Powder-Free Large 100/bx 7.34 MCRDF-850-XL Derma Free® Powder-Free XLarge 100/bx 7.34
D. Ansell Dura-Touch® Disposable GlovesPowder-free, component materials comply with current FDA regulations for food contact (21CFR 177.2600)Bare hand dexterity and sensitivity, clear 3 mil PVC vinyl gloves are designed for light manufacturing, maintenance and cleanup, janitorial and painting applicationsAmbidextrousSold per dispenser box
Part Number Description Size Packaged PriceANE34-725-S 3 mil Dura-Touch®, Powder-Free Small 100/bx 4.92 ANE34-725-M 3 mil Dura-Touch®, Powder-Free Medium 100/bx 4.92 ANE34-725-L 3 mil Dura-Touch®, Powder-Free Large 100/bx 4.92 ANE34-725-XL 3 mil Dura-Touch®, Powder-Free XLarge 100/bx 4.92
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
B
A
C
D
142
Disposable Gloves and Finger Cots
D. Ansell Poly-D® GlovesConstructed of a sheer-gauge polyethylene film which provides an excellent sense of touch9” long ambidextrous gloves are powder-free and sulfur-free1 mil clear embossedIdeal for food preparation and small parts handlingMeet current FDA regulations for food contactSold per dispenser box
Part Number Description Size Packaged PriceANE35-830-S Poly-D® Clear, Embossed Small 100/bx 2.75 ANE35-830-M Poly-D® Clear, Embossed Medium 100/bx 2.75 ANE35-830-L Poly-D® Clear, Embossed Large 100/bx 2.75
CAUTION: Products containing natural rubber latex may cause allergic reactions in some individuals.
A. Microflex® NeoPro® and NeoPro® EC Powder-Free Chloroprene Gloves
Latex-free green poly-chloroprene glove that provides the fit and feel of natural rubber latex with the barrier properties of syntheticFormula simulates latex with a memory that allows maximum sensitivity, dexterity and overall comfortPowder-free ambidextrous glove is polymer-coated for quick donning and features textured fingers for a secure gripNon-sterile disposable glove provides splash protection
B. Ansell NeoTouch® GlovesThe first neoprene single-use gloves for industrial useAn alternative to natural rubber latex that protects against Type 1 allergies Excellent resistance to acids, bases and alcoholsExclusive formulation provides superior comfortBright green 5 mil neoprene gloves with textured fingertips and a rolled, beaded cuffExam gradeFood grade—complies with FDA food handling requirements (21 CFR 177.2600)Sold per dispenser box
Part Number Description Size Packaged PriceANE25-101-S NeoTouch®, 91⁄2” Small 100/bx 18.98 ANE25-101-M NeoTouch®, 91⁄2” Medium 100/bx 18.98 ANE25-101-L NeoTouch®, 91⁄2” Large 100/bx 18.98 ANE25-101-XL NeoTouch®, 91⁄2” XLarge 100/bx 18.98ANE25-201-S NeoTouch®, 11” Small 100/bx 23.79 ANE25-201-M NeoTouch®, 11” Medium 100/bx 23.79 ANE25-201-L NeoTouch®, 11” Large 100/bx 23.79 ANE25-201-XL NeoTouch®, 11” XLarge 100/bx 23.79
C. Honeywell Natural Rubber Finger CotsThin gauge 3 mil for extremely high sensitivityTapered fit is more comfortable and fits fingers betterComply with USDA and FDA regulations, 21 CFR, for use in food processing
Part Number Description Size Packaged PriceNOS311LWR/S Finger Cots, Powdered, 23⁄4” Small 144/bx 3.30 NOS321LWR/M Finger Cots, Powdered, 23⁄4” Medium 144/bx 3.30 NOS331LWR/L Finger Cots, Powdered, 23⁄4” Large 144/bx 3.30
NeoPro® Glove Profile: Length 9.6”, Cuff Thickness 4.3 mil, Palm Thickness 5.1 mil, Finger Thickness 6.7 mil. Sold per dispenser box Part Number Description Size Packaged PriceMCRNPG-888-XS NeoPro® XSmall 100/bx 16.87 MCRNPG-888-S NeoPro® Small 100/bx 16.87 MCRNPG-888-M NeoPro® Medium 100/bx 16.87 MCRNPG-888-L NeoPro® Large 100/bx 16.87 MCRNPG-888-XL NeoPro® XLarge 100/bx 16.87
NeoPro® EC has an extended cuff. Glove Profile: Length 11.8”, Cuff Thickness 4.7 mil, Palm Thickness 6.3 mil, Finger Thickness 8.3 mil. Sold per dispenser boxPart Number Description Size Packaged PriceMCRNEC-288-S NeoPro® EC Small 50/bx 15.25 MCRNEC-288-M NeoPro® EC Medium 50/bx 15.25 MCRNEC-288-L NeoPro® EC Large 50/bx 15.25 MCRNEC-288-XL NeoPro® EC XLarge 50/bx 15.25 MCRNEC-288-XXL NeoPro® EC 2XLarge 50/bx 15.25
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
143
Hand Protection InformationINFORMATION FOR YOUR SAFETY
143
Chemical Resistance
Permeation and DegradationThere are as many options when choosing gloves with chemical resistant properties as there are chemicals used in the workplace. Permeation and Degradation are two ways of measuring the protective capabilities of a material. It’s important to choose the right glove to protect against the specific chemicals present in each application.Permeation is the process in which a chemical can pass through protective film without going through pinholes, pores or other visible openings. The chemical molecules move between the molecules of the material and make their way to the other side of the film. Breakthrough is calculated in minutes and represents the time it takes for the chemical to first be detected on the other side of the film. Rate is a measurement of the highest flow rate for the permeating chemical during the course of a six hour test.Degradation is reduction of one or more physical properties of a glove due to contact with a chemical. Certain glove materials may become hard, stiff or brittle, or they may become softer, weaker and swell to several times their original size. If significant Degradation occurs, a gloves permeation resistance is quickly impaired, but Degradation and Permeation do not always correlate.
Materials Selection Guide For Chemical Resistance
Chemical resistance testing that conforms to Industry Standards includes:
ASTM F739 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials Under Conditions of Continuous Contact
ASTM F1383 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials Under Conditions of Intermittent Contact
EN 374 European Standard Protective Gloves Against Chemicals and Micro-Organisms
Natural Rubber Latex (NRL) gloves resist bases, acids, alcohols and diluted aqueous solutions of most types of chemicals. They also offer fair protection against undiluted ketones and aldehydes. In addition, natural rubber latex provides some resistance to cuts. There have been some reports of allergic reactions to the proteins in natural rubber. In cases of latex sensitivity, nitrile, neoprene and PVC are good alternatives.
The synthetic rubber compound, Nitrile, offers good protection against bases, oils, many solvents and esters, grease and animal fats. Nitrile gloves are not recommended for ketones and some organic solvents. They do provide, however, excellent resistance to snags, punctures, abrasions and cuts.
Neoprene (polychloroprene) is another synthetic rubber compound. Neoprene gloves protect against a very broad range of oils, acids, caustics and solvents. Neoprene offers less resistance to snags, punctures, abrasions and cuts than nitrile or natural rubber.
Polyvinyl Alcohol (PVA) is highly resistant to aliphatics, aromatics, chlorinated solvents, esters and most ketones. PVA gloves also resist snags, punctures, abrasions and cuts, but quickly break down when exposed to water and light alcohols.
Polyvinyl Chloride (PVC) gloves provide protection against many acids, caustics, bases and alcohols. PVC is not recommended for ketones or many other types of solvents. It generally offers good abrasion and cut resistance, but some glove styles are susceptible to cuts.
Polyethylene offers economical protection from mild chemicals, oils, fats, punctures and abrasions. Component materials of polyethylene gloves comply with FDA regulations for food contact.
Polyurethane (PUR) gloves resist bases, acids, alcohols, grease and animal fats. They’re not recommended for most types of organic solvents. Polyurethane provides excellent snag, puncture, abrasion and cut resistance. In the form of a foam, it can be highly effective as an insulating liner inside some types of supported gloves.
Butyl rubber gloves offer superior resistance to highly corrosive acids, ketones and esters. They protect well against bases, alcohols, amines and amides, glycol ethers, nitro-compounds and aldehydes. Butyl is not recommended for halogen compounds, aliphatic or aromatic hydrocarbons, or applications that require the physical strength of natural rubber. This synthetic rubber provides the highest permeation
resistance to gases and water vapors of any protective material used to make gloves.
DuPont Viton® is the most chemical resistant of all the rubbers and protects against toxic and highly corrosive chemicals. Viton® gloves protect against polychlorinated biphenyls (PCB’s), polychlorinated triphenyls, benzene and aniline. A flouroelastomer, Viton® provides excellent resistance to aromatic and aliphatic hydrocarbons as well as chlorinated solvents. It is not recommended for ketones.
Heavyweight Viton® is required for protection from physical hazards. It is primarily used when the life span of other gloves is too short to be economical.
Chemical resistance is fairly complex. Please refer to the following glove manufacturers’ chemical resistance websites for more specific information. Contact a Sales Representative to request these chemical resistant charts.
http://www.ansellpro.com/download/Ansell_8thEditionChemicalResistanceGuide.pdf
http://www.showabestglove.com/site/chemrest/
http://www.northsafety.com/DocumentConsoleDownload.aspx?DC_ID=17721
Chemical/Liquid Resistance Where chemical hazards or immersion in liquids is a concern, chemical/liquid resistant gloves are available in various compounds, in supported or unsupported styles. Base fabrics for supported gloves include jersey, which is soft and helps to absorb perspiration, or a thinner interlock fabric that helps give the glove added strength for resistance to cuts, snags, abrasions and punctures. Unsupported gloves provide enhanced dexterity and are either lined or unlined. Unsupported lined gloves have a thin coating (commonly referred to as a flock lining) embedded on the interior of the glove to help absorb perspiration, add comfort and aid in donning and doffing. Chemical handling gloves are resistant to specified chemicals and have varying degrees of resistance to cuts, snags, abrasions and punctures.
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
A
B
144
Chemical-Resistant Latex Gloves
B. Ansell Natural Blue™ Rubber GlovesUnsupported, unlined, 17 mil light-duty natural rubber latex gloves with pinked cuffAn ideal glove for safety and dexterity in the food processing industrySuperior tactile sensitivity with good chemical, snag, puncture and abrasion resistanceFish scale grip pattern Conspicuous blue color is ideal for poultry and food processing industriesComply with FDA Food Handling Requirements (21 CFR 177.2600)
Part Number Description Size PriceANE356-7 Natural Blue™ 12” 7 1.17 ANE356-8 Natural Blue™ 12” 8 1.17 ANE356-9 Natural Blue™ 12” 9 1.17 ANE356-10 Natural Blue™ 12” 10 1.17
C. Ansell FL100 Natural Latex Gloves Unsupported, 17 mil medium-duty natural latex gloves with pinked cuff The perfect combination of strength, sensitivity and moderate chemical protection Cotton flock lined Fish scale pattern provides grip on wet or dry objects #155 gloves comply with FDA food handling requirements (21 CFR 177.2600)
Part Number Description Size Price ANE155-7 #155 FL100 Natural Latex , 12”, Sky Blue 7 1.02 ANE155-8 #155 FL100 Natural Latex , 12”, Sky Blue 8 1.02 ANE155-9 #155 FL100 Natural Latex, 12”, Sky Blue 9 1.02 ANE155-10 #155 FL100 Natural Latex, 12”, Sky Blue 10 1.02ANE198-7 #198 FL100 Natural Latex, 12”, Yellow 7 0.98 ANE198-8 #198 FL100 Natural Latex, 12”, Yellow 8 0.98 ANE198-9 #198 FL100 Natural Latex, 12”, Yellow 9 0.98 ANE198-10 #198 FL100 Natural Latex, 12”, Yellow 10 0.98
A. Radnor® Unsupported Natural Rubber Latex GlovesUnsupported 12” 18 mil natural rubber latex gloves with patterned grip Flock lined gloves absorb perspiration for added comfortUnlined styles are chlorinated for better chemical protection and strengthMeet FFDCA requirements for food contact
Part Number Description Size Grip Pattern PriceRAD64057812 12” Amber, Unlined, 18 mil Small 1.20 RAD64057813 12” Amber, Unlined, 18 mil Medium 1.20 RAD64057814 12” Amber, Unlined, 18 mil Large 1.20 RAD64057815 12” Amber, Unlined, 18 mil XLarge 1.20RAD64057816 12” Blue, Unlined, 18 mil Small 1.25 RAD64057817 12” Blue, Unlined, 18 mil Medium 1.25 RAD64057818 12” Blue, Unlined, 18 mil Large 1.25 RAD64057819 12” Blue, Unlined, 18 mil XLarge 1.25RAD64057820 12” Yellow, Flock Lined, 18 mil Small 0.96 RAD64057821 12” Yellow, Flock Lined, 18 mil Medium 0.96 RAD64057822 12” Yellow, Flock Lined, 18 mil Large 0.96 RAD64057823 12” Yellow, Flock Lined, 18 mil XLarge 0.96RAD64057824 12” Blue, Flock Lined, 18 mil Small 0.96 RAD64057825 12” Blue, Flock Lined, 18 mil Medium 0.96 RAD64057826 12” Blue, Flock Lined, 18 mil Large 0.96 RAD64057827 12” Blue, Flock Lined, 18 mil XLarge 0.96
C
C
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
INFORMATION FOR YOUR SAFETY
ectivew
earFirst A
idP
roductsS
pill Control &
Containm
entpp
FaciciililililiiitytytytytytyttyyS
uS
uS
uS
uS
uuupppppppppppppplilililileessssFl
C
D
A
B
145
Chemical-Resistant Latex Gloves
The gloves shown on this page consist of natural rubber latex which contains proteins that may cause allergic reactions in some individuals. If latex sensitivity is known or suspected, try switching to comparable nitrile, neoprene or PVC gloves.
A Note on Natural Rubber Latex
A. Technicians™ Gloves13 mil blend of neoprene and natural rubber latex delivers optimal durability and chemical resistancePebble embossed design increases grip on wet or dry surfacesPinked cuffDexterity and sensitivity is combined with moderate chemical protectionIdeal applications: handling acids, alkalies, salts, ketones, alcohols, canning, food processing, janitorial, maintenance work, detergents and cleaning liquidsComply with FDA food contact regulations (21 CFR 177.2600)
Part Number Description Size PriceANE390-7 Technicians™ 12” 7 1.15 ANE390-8 Technicians™ 12” 8 1.15 ANE390-9 Technicians™ 12” 9 1.15 ANE390-10 Technicians™ 12” 10 1.15 ANE390-11 Technicians™ 12” 11 1.15
B. Canners & Handlers™ GlovesUnsupported, unlined, medium-duty natural rubber latex gloves with choice of embossed designsNatural color, 20 mil gloves offer good chemical, snag, puncture, abrasion and cut resistanceThe grip pattern makes gloves ideal for poultry, food processing, food service and janitorial or plant maintenanceComply with FDA food contact regulations (21 CFR 177.2600)
Part Number Description Size PriceANE392-7 Canners & Handlers™ 12” Pebble Grip 7 1.28 ANE392-8 Canners & Handlers™ 12” Pebble Grip 8 1.28 ANE392-9 Canners & Handlers™ 12” Pebble Grip 9 1.28 ANE392-10 Canners & Handlers™ 12” Pebble Grip 10 1.28ANE394-7 Canners & Handlers™ 12” Patterned Grip 7 1.26 ANE394-8 Canners & Handlers™ 12” Patterned Grip 8 1.26 ANE394-9 Canners & Handlers™ 12” Patterned Grip 9 1.26 ANE394-10 Canners & Handlers™ 12” Patterned Grip 10 1.26
C. Tan Rubber Gloves Unsupported, flock lined, heavy-duty natural rubber latex gloves with recessed diamond grip18 mil gloves are case hardened to provide greater chemical and abrasion resistanceCurved fingers and contoured palm to fit more comfortably Ideal for food processing, electronics manufacturing, and handling of acids, alkalies, salts and keytones
Part Number Description Size PriceANE26-665-8 Tan Rubber 13” 8-81⁄2 3.53 ANE26-665-9 Tan Rubber 13” 9-91⁄2 3.53 ANE26-665-10 Tan Rubber 13” 10-101⁄2 3.53
D. Hy-Care® Gloves Fully coated natural rubber latex glove offers excellent flexibility and durability Soft-knit cotton liner helps keep hands and fingers comfortable in hot or cold environments Rough texture provides a secure grip on smooth, slippery surfaces, even when wetCurved fingers and contoured palm to fit more comfortably Perfect for commercial fishing, janitorial and maintenance work, and fiberglass workMaterial components comply with FDA regulations for food contact
Part Number Description Size PriceANE62-400-8 Hy-Care® 12” 8 5.81 ANE62-400-9 Hy-Care® 12” 9 5.81 ANE62-400-10 Hy-Care® 12” 10 5.81 ANE62-400-11 Hy-Care® 12” 11 5.81
CAUTION: Products containing natural rubber latex may cause allergic reactions in some individuals.
t l bb l t ll i
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
A B
D
E
C
F
146
Chemical-Resistant Neoprene Gloves
Embossed Grip
A. Ansell Neoprene™ GlovesUnsupported, 18 mil neoprene gloves with straight cuff Case-hardened to increase chemical and abrasion resistance Cotton flock-lined for comfort Sandpatch grip design Treated with Santized® - Actifresh® to reduce bacteria buildup Offer broad-spectrum protection, with excellent resistance to a wide range of chemicals, including oils, acids, caustics and alcoholsComply with FDA food handling requirements (21 CFR 177.2600)
Part Number Description Size PriceANE29-865-7 Neoprene™ 13”, 18 mil 7 5.15 ANE29-865-8 Neoprene™ 13”, 18 mil 8 5.15 ANE29-865-9 Neoprene™ 13”, 18 mil 9 5.15 ANE29-865-10 Neoprene™ 13”, 18 mil 10 5.15 ANE29-865-11 Neoprene™ 13”, 18 mil 11 5.15
B. Ansell Omni® Neoprene/Natural Rubber Latex Blend GlovesUnsupported, 20 mil unique neoprene and natural rubber latex blend with pinked cuff Economical alternative to higher priced neoprene and nitrile gloves in medium-duty applications 100% cotton flock lining offers increased comfort Pebble embossed grip provides added grip on wet or dry surfaces Omni® gloves comply with FDA food handling requirements (21 CFR 177.2600)
Part Number Description Size PriceANE276-7 Omni® 12”, 20 mil 7 2.15 ANE276-8 Omni® 12”, 20 mil 8 2.15 ANE276-9 Omni® 12”, 20 mil 9 2.15 ANE276-10 Omni® 12”, 20 mil 10 2.15
C. Ansell Chemi-Pro® Neoprene Latex GlovesUnsupported, 27 mil heavy-duty gloves use a unique dipping process to combine neoprene over natural rubber latex for increased protection against a wide range of chemicalsExtra protection and durability for more demanding applications Cotton flock lining absorbs perspiration and increases worker comfort Diamond embossed pattern provides added grip on wet or dry surfaces
Part Number Description Size PriceANE224-7 Chemi-Pro® 13”, 27 mil 7 2.66 ANE224-8 Chemi-Pro® 13”, 27 mil 8 2.66 ANE224-9 Chemi-Pro® 13”, 27 mil 9 2.66 ANE224-10 Chemi-Pro® 13”, 27 mil 10 2.66
D. Best® Chloroflex™ GlovesUnsupported 13”, 24 mil premium quality neoprene glove delivers excellent protection from a wide range of oils and chemicals that degrade natural rubberFeature a tractor tread finish for firm wet or dry grip and flock lining absorbs perspirationIn compliance with 21CFR, parts 170-199
Part Number Description Size PriceB13723L-09 Chloroflex™ 13”, 24 mil Large 3.69 B13723XL-10 Chloroflex™ 13”, 24 mil XLarge 3.69
E. Best® Chem Master® Gloves Unsupported, flock lined 12”, 26 mil gloves are a double dipped natural latex and custom compounded neoprene blend, with self-flushing tractor treadResist animal fats, oils, greases, salts, caustics, acids and alcohols plus petroleum based solvents, detergents and keytones In compliance with 21CFR, 170-199
Part Number Description Size PriceB13CHMS-07 Chem Master® 12”, 26 mil Small 2.19 B13CHMM-08 Chem Master® 12”, 26 mil Medium 2.19 B13CHML-09 Chem Master® 12”, 26 mil Large 2.19 B13CHMXL-10 Chem Master® 12”, 26 mil XLarge 2.19
F. Radnor® Neoprene over Natural Rubber Latex GlovesUnsupported 22 mil 12” neoprene-over-natural rubber is flexible and provides excellent tactile sensitivity Good resistance to a broad range of chemicals Flock lining absorbs perspiration for improved comfort Embossed grip pattern encourages run-off of fluids to enhance grip effectiveness Comply with 21 CFR, parts 170-199 and is acceptable for food handling applications
Part Number Description Size PriceRAD64056050 12” Blue Over Yellow, Flock Lined, 22 mil 7 2.04 RAD64056051 12” Blue Over Yellow, Flock Lined, 22 mil 8 2.04 RAD64056052 12” Blue Over Yellow, Flock Lined, 22 mil 9 2.04 RAD64056053 12” Blue Over Yellow, Flock Lined, 22 mil 10 2.04
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
147
Chemical-Resistant Neoprene Gloves
Smooth
Rough
A
B
D E
C
Call us.
We can help!
A. Ansell Scorpio® Neoprene Coated GlovesFlexible neoprene coated interlock knit lining stretches to provide a snug fitTwo-piece lining eliminates seams which cause hand irritation and premature wear-throughDipped rough finish makes for excellent grip of wet or slippery materialsBroad spectrum of resistance to chemicals including oils, acids, alcohol and caustics
Part Number Description Size PriceANE8-352-8 Scorpio® 12” Gauntlet Medium 5.83 ANE8-352-9 Scorpio® 12” Gauntlet Large 5.83 ANE8-352-10 Scorpio® 12” Gauntlet XLarge 5.83ANE8-354-8 Scorpio® 14” Gauntlet Medium 6.96 ANE8-354-9 Scorpio® 14” Gauntlet Large 6.96 ANE8-354-10 Scorpio® 14” Gauntlet XLarge 6.96
B. Ansell Neox® Neoprene Coated GlovesHeavy-duty neoprene coating provides better all-around resistance to cuts, abrasion and chemicals than most other glove coatingsTwo-piece jersey/fleece lining enhances puncture and snag resistance and eliminates irritating seamsSmooth finishSuitable for intermittent handling of warm liquids Curved fingers and a wing thumb offer a natural fit for greater comfortAll Neox® gloves comply with FDA food handling requirements (21 CFR 177.2600)
Part Number Description PriceANE9-924-10 Neox® 14” Gauntlet 11.25 ANE9-928-10 Neox® 18” Gauntlet 17.17
C. Best® Neoprene® & Neo Grab™ Gloves Cotton liner is multi-dipped in premium-grade neoprene for superior quality and durabilityProtect against acids, caustics, oils, greases and many solventsAvailable in five lengths with smooth or rough finish for secure grip in wet or dry conditions Sanitized® to reduce the effects of perspiration, mold and mildew
In compliance with 21CFR, parts 170-199Part Number Description Finish PriceB136780-10 Neoprene® 12” Gauntlet Smooth 7.60 B136784-10 Neoprene® 14” Gauntlet Smooth 9.08 B136797-10 Neoprene® Elbow Length Smooth 12.64 B136731-10 Neoprene® Shoulder Length Smooth 53.66B136780R-10 Neo Grab™ 12” Gauntlet Rough 7.60 B136784R-10 Neo Grab™ 14” Gauntlet Rough 9.08 B136797R-10 Neo Grab™ Elbow Length Rough 12.64
D. Best® Ultraflex® II Neoprene® GlovesTwo-piece cotton interlock liner with a strong bonded neoprene coating enhances glove flexibility and integrityWithstand complete submersion in a wide range of chemicals in which neoprene is recommendedRough finish maintains an excellent wet gripSanitized® and launderable
In compliance with 21CFR, parts 170-199Part Number Description Size PriceB133414-08 Ultraflex® II 14” Gauntlet Small 6.51 B133414-09 Ultraflex® II 14” Gauntlet Medium 6.51 B133414-10 Ultraflex® II 14” Gauntlet Large 6.51 B133414-11 Ultraflex® II 14” Gauntlet XLarge 6.51
E. Best® Insulated Neo Grab™ Gloves Triple-layer construction of foam insulation sandwiched between a layer of 100% cotton jersey and 100% cotton interlock to guard against heat or coldNeoprene coating with rough finish provides outstanding resistance to abrasion, cut and a wide range of chemicals Sanitized® and launderable
In compliance with 21CFR, parts 170-199Part Number Description Size PriceB136781R-10 Insulated Neo Grab™ 12” Gauntlet Large 13.19
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
A
D
B
C
148
Chemical-Resistant Nitrile Gloves
A. Radnor® Unsupported Nitrile GlovesUnsupported, high performance nitrile gloves are offered in a variety of thicknessesOutstanding strength against snags, punctures, abrasion and cuts combined with superior chemical protectionMeet FFDCA requirements for food contact
Part Number Description Size PriceRAD64056025 13” Unlined, 11 mil, Sand Patch Finish 7 1.53 RAD64056026 13” Unlined, 11 mil, Sand Patch Finish 8 1.53 RAD64056027 13” Unlined, 11 mil, Sand Patch Finish 9 1.53 RAD64056028 13” Unlined, 11 mil, Sand Patch Finish 10 1.53 RAD64056029 13” Unlined, 11 mil, Sand Patch Finish 11 1.53RAD64056031 13” Unlined, 15 mil, Sand Patch Finish 7 1.73 RAD64056032 13” Unlined, 15 mil, Sand Patch Finish 8 1.73 RAD64056033 13” Unlined, 15 mil, Sand Patch Finish 9 1.73 RAD64056034 13” Unlined, 15 mil, Sand Patch Finish 10 1.73 RAD64056035 13” Unlined, 15 mil, Sand Patch Finish 11 1.73RAD64056037 13” Flock Lined, 15 mil, Sand Patch Finish 7 1.61 RAD64056038 13” Flock Lined, 15 mil, Sand Patch Finish 8 1.61 RAD64056039 13” Flock Lined, 15 mil, Sand Patch Finish 9 1.61 RAD64056040 13” Flock Lined, 15 mil, Sand Patch Finish 10 1.61 RAD64056041 13” Flock Lined, 15 mil, Sand Patch Finish 11 1.61RAD64056042 13” Flock Lined, 17 mil, Sand Patch Finish 7 1.82 RAD64056043 13” Flock Lined, 17 mil, Sand Patch Finish 8 1.82 RAD64056044 13” Flock Lined, 17 mil, Sand Patch Finish 9 1.82 RAD64056045 13” Flock Lined, 17 mil, Sand Patch Finish 10 1.82 RAD64056046 13” Flock Lined, 17 mil, Sand Patch Finish 11 1.82
B. Ansell Sol-Vex® Premium Unsupported Nitrile Gloves High performance nitrile compound that provides outstanding strength and chemical resistanceHigh levels of flexibility, comfort and dexteritySand patch surface texture improves grip, especially with wet or slippery objectsComply with FDA food handling requirements (21 CFR 177.2600)
Part Number Description Size PriceANE37-145-7 Sol-Vex® 13” Unlined, 11 mil 7 2.08 ANE37-145-8 Sol-Vex® 13” Unlined, 11 mil 8 2.08 ANE37-145-9 Sol-Vex® 13” Unlined, 11 mil 9 2.08 ANE37-145-10 Sol-Vex® 13” Unlined, 11 mil 10 2.08 ANE37-145-11 Sol-Vex® 13” Unlined, 11 mil 11 2.08ANE37-175-6 Sol-Vex® 13” Flock Lined, 15 mil 6 2.36 ANE37-175-7 Sol-Vex® 13” Flock Lined, 15 mil 7 2.36 ANE37-175-8 Sol-Vex® 13” Flock Lined, 15 mil 8 2.36 ANE37-175-9 Sol-Vex® 13” Flock Lined, 15 mil 9 2.36 ANE37-175-10 Sol-Vex® 13” Flock Lined, 15 mil 10 2.36 ANE37-175-11 Sol-Vex® 13” Flock Lined, 15 mil 11 2.36ANE37-155-7 Sol-Vex® 13” Unlined, 15 mil 7 2.40 ANE37-155-8 Sol-Vex® 13” Unlined, 15 mil 8 2.40 ANE37-155-9 Sol-Vex® 13” Unlined, 15 mil 9 2.40 ANE37-155-10 Sol-Vex® 13” Unlined, 15 mil 10 2.40 ANE37-155-11 Sol-Vex® 13” Unlined, 15 mil 11 2.40ANE37-165-9 Sol-Vex® 15” Unlined, 22 mil 9 8.08 ANE37-165-10 Sol-Vex® 15” Unlined, 22 mil 10 8.08 ANE37-165-11 Sol-Vex® 15” Unlined, 22 mil 11 8.08ANE37-185-8 Sol-Vex® 18” Unlined, 22 mil 8 11.32 ANE37-185-9 Sol-Vex® 18” Unlined, 22 mil 9 11.32 ANE37-185-10 Sol-Vex® 18” Unlined, 22 mil 10 11.32 ANE37-185-11 Sol-Vex® 18” Unlined, 22 mil 11 11.32
Sand Patch Finish
C. Honeywell Unsupported Nitrile Gloves100% nitrile content offers superior resistance to cuts, snags, abrasions and puncturesPerform better than natural rubber, neoprene and vinyl gloves when exposed to solvents, caustics and animal fatsComply with USDA and FDA regulations, 21CFR, for use in food processing
Part Number Description Size PriceNOSLA115EB/7 13” Unlined, 11 mil 7 2.33 NOSLA115EB/8 13” Unlined, 11 mil 8 2.33 NOSLA115EB/9 13” Unlined, 11 mil 9 2.33 NOSLA115EB/10 13” Unlined, 11 mil 10 2.33 NOSLA115EB/11 13” Unlined, 11 mil 11 2.33NOSLA115EBFL/7 13” Flock Lined, 15 mil 7 2.33 NOSLA115EBFL/8 13” Flock Lined, 15 mil 8 2.33 NOSLA115EBFL/9 13” Flock Lined, 15 mil 9 2.33 NOSLA115EBFL/10 13” Flock Lined, 15 mil 10 2.33 NOSLA115EBFL/11 13” Flock Lined, 15 mil 11 2.33
D. Best® Nitri-Solve® Unsupported Nitrile GlovesMade from a special nitrile compoundCase-hardened finish enhances chemical and abrasion resistance, while making it easier to pull gloves on and offBisque finish grip makes wet work easier and safer, and an ergonomic design maximizes comfortProvide excellent protection against cuts, abrasions, punctures and superior resistance to a broad range of solvents, animal fats and other chemicalsNFPA 1992 Compliant
Part Number Description Size PriceB13717-08 Nitri-Solve® 13” Unlined, 11 mil 8 1.49 B13717-09 Nitri-Solve® 13” Unlined, 11 mil 9 1.49 B13717-10 Nitri-Solve® 13” Unlined, 11 mil 10 1.49 B13717-11 Nitri-Solve® 13” Unlined, 11 mil 11 1.49B13727-07 Nitri-Solve® 13” Unlined, 15 mil 7 1.60 B13727-08 Nitri-Solve® 13” Unlined, 15 mil 8 1.60 B13727-09 Nitri-Solve® 13” Unlined, 15 mil 9 1.60 B13727-10 Nitri-Solve® 13” Unlined, 15 mil 10 1.60 B13727-11 Nitri-Solve® 13” Unlined, 15 mil 11 1.60B13730-07 Nitri-Solve® 13” Flock Lined, 15 mil 7 1.60 B13730-08 Nitri-Solve® 13” Flock Lined, 15 mil 8 1.60 B13730-09 Nitri-Solve® 13” Flock Lined, 15 mil 9 1.60 B13730-10 Nitri-Solve® 13” Flock Lined, 15 mil 10 1.60 B13730-11 Nitri-Solve® 13” Flock Lined, 15 mil 11 1.60B13747-09 Nitri-Solve® 19” Unlined, 22 mil 9 8.51 B13747-10 Nitri-Solve® 19” Unlined, 22 mil 10 8.51 B13747-11 Nitri-Solve® 19” Unlined, 22 mil 11 8.51
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
B
Pr
otection
D
E
Protectio
149
Chemical-Resistant Nitrile Gloves
C
®
A. Best® Nitri-DEX® 707 GlovesHybrid gloves bridge the gap between top chemical performance and the fit, feel and comfort of disposable glovesTractor tread 9 mil, 12” long gloves with rolled cuff are perfect for food processing and agricultural produce applicationsRevolutionary concept left and right hand specificCompartment bags facilitate one-hand specific uses, minimizing waste Sold per pair, 25 pair per bagMeet OSHA 21 CFR, parts 170-199 Standards
Part Number Description Size PriceB13707-07 Nitri-DEX® 707 Small 0.98 B13707-08 Nitri-DEX® 707 Medium 0.98 B13707-09 Nitri-DEX® 707 Large 0.98 B13707-10 Nitri-DEX® 707 XLarge 0.98
B. Ansell AlphaTEC® GlovesKnit lined acrylic with revolutionary Ansell Grip Technology®
A nitrile layer filled with microscopic channels that actively transfers oils and other lubricants away from the gripping surfaceGrip increases control while reducing stress and fatiguePerfect for chemical processing, automotive, industrial manufacturing and construction
Part Number Description Size PriceANE58-530-8 AlphaTEC®, 12” 8 7.30 ANE58-530-9 AlphaTEC®, 12” 9 7.30 ANE58-530-10 AlphaTEC®, 12” 10 7.30 ANE58-530-11 AlphaTEC®, 12” 11 7.30
C. Honeywell Nitri-Knit® Supported Nitrile GlovesInterlock liner adds strength and resistance from cuts, snags, abrasion and punctures while adding comfort to the wearerTrue dip coated glove has a permanent bond of nitrile to inner liner, won’t peel apart like glued-in linersUnique texture finish provides excellent grip on oily, wet or dry objects
Part Number Description Size PriceNOSNK803/7 Nitri-Knit®, 12” 7 6.74 NOSNK803/8 Nitri-Knit®, 12” 8 6.74 NOSNK803/9 Nitri-Knit®, 12” 9 6.74 NOSNK803/10 Nitri-Knit®, 12” 10 6.74NOSNK803ES/8 Nitri-Knit® 26” with Extended Sleeve 8 20.56 NOSNK803ES/9 Nitri-Knit® 26” with Extended Sleeve 9 20.56 NOSNK803ES/10 Nitri-Knit® 26” with Extended Sleeve 10 20.56
D. Best® NSK-24™ GlovesSuper flexible, watertight interlock knit-lined nitrile glovesExcellent protection from a wide array of solvents, oils and acidsRough finish texture that delivers a sure grip in even the oiliest and wettest applicationsProvide flexibility and dexterity not found in thicker glovesInterlock liner offers an added degree of comfort and protectionSuperior chemical protection, excellent comfort and maximum flexibilityChoose from 14” or 26” length
Part Number Description Size PriceB13NSK24-08 NSK-24™, 14” Small 4.87 B13NSK24-09 NSK-24™, 14” Medium 4.87 B13NSK24-10 NSK-24™, 14” Large 4.87 B13NSK24-11 NSK-24™, 14” XLarge 4.87B13NSK26-08 NSK-26™, 26” Small 12.51 B13NSK26-09 NSK-26™, 26” Medium 12.51 B13NSK26-10 NSK-26™, 26” Large 12.51 B13NSK26-11 NSK-26™, 26” XLarge 12.51
E. Ansell Sol-Knit® Supported Nitrile GlovesTough, flexible glove that resists oil, grease, lubricants, acids, solvents and a wide range of other chemical hazardsInterlock cotton liner adds strength and eliminates seams which cause hand irritation and premature wear-throughCurved, pre-flexed fingers and wing thumb reduce hand fatigue for added comfortComponent materials comply with FDA regulations for food contact
Part Number Description Size PriceANE39-122-7 Sol-Knit®, 12” 7 6.72 ANE39-122-8 Sol-Knit®, 12” 8 6.72 ANE39-122-9 Sol-Knit®, 12” 9 6.72 ANE39-122-10 Sol-Knit®, 12” 10 6.72
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
B
C
A
150
Chemical-Resistant PVC Gloves
Interlock Lined
Jersey Lined
RAD64057800
Knitwrist
RAD64057802 RAD64057804
12”
RAD64057806
A. Economy PVC Gloves (Interlock Lined)Black economy PVC over cotton knit interlock liningChoose from smooth or semi-rough textured finish
Part Number Description Finish Size PriceRAD64057800 Knitwrist Smooth Large 1.53 RAD64057801 Knitwrist Semi-Rough Large 1.67RAD64057802 10” Gauntlet Smooth Large 1.73 RAD64057803 10” Gauntlet Semi-Rough Large 1.86RAD64057804 12” Gauntlet Smooth Large 1.92 RAD64057805 12” Gauntlet Semi-Rough Large 2.06RAD64057806 14” Gauntlet Smooth Large 2.26 RAD64057807 14” Gauntlet Semi-Rough Large 2.37RAD64057808 18” Gauntlet Smooth Large 2.88
B. Double-Dipped PVC Gloves (Jersey Lined)Double-dipped PVC gloves are available in black or green Soft jersey lining offers cushioning and moderate insulationRough sandpaper finish enhances grip in wet and oily applications PVC exterior resists oil, grease, acids and solvents and provides moderate abrasion resistance
Part Number Description Size PriceRAD64057809 Jersey Lining, Knitwrist Green Large 2.20RAD64057810 Jersey Lining, 12” Green Large 2.73 RAD64057811 Jersey Lining, 14” Green Large 2.96RAD64056410 Jersey Lining, Knitwrist Black Large 2.22RAD64056411 Jersey Lining, 10” Black Large 2.47 RAD64056412 Jersey Lining, 12” Black Large 2.71 RAD64056413 Jersey Lining, 14” Black Large 2.92 RAD64056414 Jersey Lining, 18” Black Large 3.75
C. Double-Dipped PVC Gloves (Interlock Lined)Double-dipped black PVC glovesCotton knit interlock lining wicks away moisture and keep hands cool and dryRough sandpaper finish enhances grip in wet or oily applications Ideal for maintenance, auto industry, refining, mining and utilities
Part Number Description Size PriceRAD64056405 Interlock Lining, Knitwrist Large 2.08RAD64056406 Interlock Lining, 10” Large 2.31 RAD64056407 Interlock Lining, 12” Large 2.53 RAD64056408 Interlock Lining, 14” Large 2.75 RAD64056409 Interlock Lining, 18” Large 3.29
RAD64057808
18”
14”
10”
Semi-Rough
Smooth
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
A
D
B
C
152
Chemical-Resistant Butyl/Viton GlovesA. Honeywell Neoprene and Butyl Glovebox Gloves
Neoprene Glovebox gloves are designed for isolator boxesOffer high tensile strength and flexibility for work requiring good sensitivity and dexteritySeamless one-piece construction provides maximum strength and integrityButyl Glovebox gloves boast the highest permeation resistance to water vapor and gasesRemain flexible at low temperatures, and resist oxygenated solvents and most oxidizing chemicals32” in length and have an 8” wide cuff
Part Number Description Size PriceNOS8N1532/9Q Neoprene, 15 mil, Hand Specific 93⁄4 174.86 NOS8N1532A/9Q Neoprene, 15 mil, Ambidextrous 93⁄4 174.86 NOS8N1532/10H Neoprene, 15 mil, Hand Specific 101⁄2 174.86 NOS8N1532A/10H Neoprene, 15 mil, Ambidextrous 101⁄2 174.86NOS8N3032/9Q Neoprene, 30 mil, Hand Specific 93⁄4 210.28 NOS8N3032A/9Q Neoprene, 30 mil, Ambidextrous 93⁄4 210.28 NOS8N3032/10H Neoprene, 30 mil, Hand Specific 101⁄2 210.28 NOS8N3032A/10H Neoprene, 30 mil, Ambidextrous 101⁄2 210.28NOS8B1532/10H Butyl, 15 mil, Hand Specific 101⁄2 260.20 NOS8B1532A/10H Butyl, 15 mil, Ambidextrous 101⁄2 260.20NOS8B3032/10H Butyl, 30 mil, Hand Specific 101⁄2 276.78 NOS8B3032A/10H Butyl, 30 mil, Ambidextrous 101⁄2 276.78
B. Honeywell Butyl GlovesHighest permeation resistance to gas or water vapor including ketones (M.E.K., M.I.B.K., Acetone) and estersFlexible even in low temperaturesCurved finger and hand design provides natural fit and considerable comfortChoose smooth or rough finish with rolled beaded cuff
Part Number Description Size PriceNOSB131/7 Butyl, 11”, 13 mil, Smooth Grip 7 22.24 NOSB131/8 Butyl, 11”, 13 mil, Smooth Grip 8 22.24 NOSB131/9 Butyl, 11”, 13 mil, Smooth Grip 9 22.24 NOSB131/10 Butyl, 11”, 13 mil, Smooth Grip 10 22.24 NOSB131/11 Butyl, 11”, 13 mil, Smooth Grip 11 22.24NOSB131R/7 Butyl, 11”, 13 mil, Rough Grip 7 27.60 NOSB131R/8 Butyl, 11”, 13 mil, Rough Grip 8 27.60 NOSB131R/9 Butyl, 11”, 13 mil, Rough Grip 9 27.60 NOSB131R/10 Butyl, 11”, 13 mil, Rough Grip 10 27.60 NOSB131R/11 Butyl, 11”, 13 mil, Rough Grip 11 27.60NOSB161/7 Butyl, 11”, 16 mil, Smooth Grip 7 27.10 NOSB161/8 Butyl, 11”, 16 mil, Smooth Grip 8 27.10 NOSB161/9 Butyl, 11”, 16 mil, Smooth Grip 9 27.10 NOSB161/10 Butyl, 11”, 16 mil, Smooth Grip 10 27.10 NOSB161/11 Butyl, 11”, 16 mil, Smooth Grip 11 27.10NOSB161R/7 Butyl, 11”, 16 mil, Rough Grip 7 32.92 NOSB161R/8 Butyl, 11”, 16 mil, Rough Grip 8 32.92 NOSB161R/9 Butyl, 11”, 16 mil, Rough Grip 9 32.92 NOSB161R/10 Butyl, 11”, 16 mil, Rough Grip 10 32.92 NOSB161R/11 Butyl, 11”, 16 mil, Rough Grip 11 32.92
C. Best® Viton® ll GlovesFluoroelastomer rubber provides superior resistance to highly corrosive acids and is excellent for handling aliphatic and aromatic hydrocarbonsThis synthetic rubber glove provides the highest permeation resistance to high molecular aromatic hydrocarbons such as Benzene, Toluene, Xylene and Polychlorinated Biphenyls (PCBs) of any protective material used to make glovesViton provides the ultimate combination of protection and dexterity12 mil thick, 12” length with a rolled cuff
Part Number Description Size PriceB13892-08 Viton® ll, 12”, 12 mil Smooth Grip Small 71.70 B13892-09 Viton® ll, 12”, 12 mil Smooth Grip Medium 71.70 B13892-10 Viton® ll, 12”, 12 mil Smooth Grip Large 71.70 B13892-11 Viton® ll, 12”, 12 mil Smooth Grip XLarge 71.70
D. Best® Butyl and Butyl ll GlovesSynthetic rubber butyl gloves offer excellent resistance to esters and ketones, and the highest permeation resistance to gases and water vapors of any protective material used in making glovesHigh quality butyl rubber used in these unlined 14” gloves ensures consistent quality, uniform thickness, flexibility and tactile sensitivitySmooth heavyweight 25 mil Butyl and 14 mil Butyl II gloves feature rolled cuff
Part Number Description Size PriceB13878-08 Butyl, 14”, 25 mil, Smooth Grip Medium 45.76 B13878-09 Butyl, 14”, 25 mil, Smooth Grip Large 45.76 B13878-10 Butyl, 14”, 25 mil, Smooth Grip XLarge 45.76 B13878-11 Butyl, 14”, 25 mil, Smooth Grip 2XLarge 45.76B13874-08 Butyl II, 14”, 14 mil, Smooth Grip Medium 31.51 B13874-09 Butyl II, 14”, 14 mil, Smooth Grip Large 31.51 B13874-10 Butyl II, 14”, 14 mil, Smooth Grip XLarge 31.51 B13874-11 Butyl II, 14”, 14 mil, Smooth Grip 2XLarge 31.51
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
154
Hand Protection InformationINFORMATION FOR YOUR SAFETY
Cut and Sewn Gloves: Fabrics like canvas, jersey, orleather are cut using a pattern into components and sewn together to make a glove. Gloves produced from smaller pieces of fabric that are sewn in a clute pattern such as cotton canvas and jersey, provide basic protection. Construction of these gloves is very labor intensive. Weights of cotton and jerseygloves are designated in ounces. The weightsrepresent a uniform industry standard of weighingfabric by the yard (i.e. and 8 oz cotton canvas gloveindicates the glove was constructed with a fabricweight of 8 oz per square yard). This is referred toas the true weight of cotton.Seamless String Knit Gloves: Knit gloves offerseamless construction and are produced onknitting machines in various gauges referring to thenumber of rows of stitches per inch. A higher gauge produces a finer, tight weave, whereas a lower gauge produces a bulkier, loose weave glove. String knits are typically 7, 10, or 13 gauge and are produced in a variety of weights from light-weight to heavyweight. Basic seamless stringknits are often ambidextrous providing for extended wear. Finer gauge liners are typically used for inspection/lisle gloves and have gained popularity as a base fabric for many coated glove applications demanding extreme dexterity and tactile sensitivity. Seamless knits offer better fit, and are typically more comfortable to wear over extended periods, and are more economical as they are not as labor intensive compared to cut and sewn styles.
Coated Gloves: General purpose coated gloves are produced by means of flat dipped technology where base cut and sewn or seamless liners are dipped into various polymers. The coatings help to enhance mechanical properties and grip characteristics to improve the wear life of the glove while maintaining dexterity, tactile sensitivity, and overall comfort. Coated gloves are palm coated allowing for ventilation on the backs and are sometimes dipped or fully coated to offer added mechanical protection to the back of the hand. Impregnated coated gloves are produced by knife-coating nitrile or PVC onto a textile substrate adding strength. Coated gloves provide an excellent alternative to leather as they provide a superior fit that is both comfortable and functional.Latex: An economical coating widely used for its superior flexibility and resistance to tear. Latex coatings offer good mechanical protection and enhanced grip and, compared to other materials, withstands extreme temperatures. Latex performs poorly and may swell and degrade when coming into contact with oils and hydrocarbons. Applications include construction, metal stamping, glass handling, recycling, automotive sub-assembly and lumber/mill work.Polyurethane (PU): A synthetic material that is highly flexible and soft with excellent tensile strength. Because of its toughness, PU coatings can often be thinner than other polymers to maximize tactile sensitivity while maintianing comparable levels of protection. PU provides good abrasion and tear resistance with exceptional wet/dry grip and resistance to oil. Polyurethane has a low particulate shed making it a good choice for high tech applications.
Applications for PU coating include electronics and small parts assembly, micro-engineering, packaging, light fabrication, and general material handling. Polyvinyl Chloride (PVC): A synthetic thermo-plastic polymer with a broad range of low hazard chemical resistance that is exceptionally durable. PVC offers good abrasion resistance, though it may be susceptible to punctures, cuts, and snags. PVC can also be applied as an air infused coating offering exceptional wet and dry grip with good mechanical properties. It stays flexible at lower temperatures making it a coating of choice in cold environments. Common applications for PVC coat-ing include plastic processing, injection molding, automotive assembly and wood working.Nitrile: A widely used synthetic rubber with a high abrasion, cut, and chemical resistance that stands up well to oil. Nitrile coating provides tough protection and is used for a variety of cut-and-sewn, impregnated and seamless knit gloves. It performs well at higher temperatures and offers a good alterna-tive to users with latex allergies. Foamed nitrile or sponge nitrile coatings are also used to create an open surface texture to channel light oils from glove surfaces for enhanced grip on wet and oily surfaces. Further expanding on this technology, recent coatings combine a two stage process that coats the glove in a liquid-proof nitrile layer, followed by a second microscopic foamed nitrile texture to wick oil from the glove surface while preventing it from penetrating the glove. Common applications for nitrile coatings include metal fabrication, machining, automotive assembly/repair, parts assembly/handling, glass handling and general maintenance.
The Hand Protection Group of the International Safety Equipment Association (ISEA) has updated this standard to assist employers and users in the appropriate selection of gloves for specific workplace exposures. The chart below provides performance ratings that allow users to interpret test results for mechanical hazards such as abrasion resistance, cut resistance, and puncture.
Rating Level 0Level
1Level
2Level
3Level
4Level
5Level
6Abrasion Resistance
(Cycles) <100 >100 >500 >1,000 >3,000 >10,000 >200,000Cut Resistance
(Grams) <200 >200 >500 >1,000 >1,500 >3,500 -
Puncture Resistance(Newtons) <10 >10 >20 >60 >100 >150 -
Glove MaterialsCotton: A natural fiber used for basic abrasion protection and mild heatprotection in heavier weights depending on the construction of the glove.Polyester: A synthetic fiber used for basic abrasion protection with low moisture absorbency that resists shrinkage. Mainly used in seamless gloves or as a blend to strengthen cotton knit materials.
Nylon: A synthetic, low lint, high tensile strength fiber that offers excellent dexterity and tactile sensitivity. Shrinkage in nylon gloves is minimal and more uniform than in cotton. Acrylic: A synthetic fiber that helps provide insulation from cold temperatures and dries quickly.
ANSI/ISEA 105-2005 Mechanical Ratings:
Abrasion ratings 0 through 3 are based on measurements with 500-gram load. Levels 4 through 6 are measured with a 1,000-gram load.**Weight needed to cut through material with 25 mm of blade travel.
Many US glove users are becoming aware of markings and symbols on theirgloves that relate to European Regulatory Standards. Though not required in the US,they offer some useful information. One such marking for general purpose glovescertifies independent testing against the requirements of EN388 for mechanicalhazards (abrasion, cut, tear and puncture resistance). The series of numbersadjacent to the EN388 pictograph represent the performance level of each hazard.
Number Rating Level 0 Level 1 Level 2 Level 3 Level 4 Level 5
1Abrasion Resistance
(Cycles) <100 >100 >500 >2000 >8000 -
2Cut Resistance
(Index) <1.2 >1.2 >2.5 >5.0 >10.0 >20.0
3Tear Resistance
(Newtons) <10 >10 >25 >50 >75 -
4Puncture Resistance
(Newtons) <20 >20 >60 >100 >150 -
EN388 Mechanical Ratings:
CE StandardsMechanical Hazard EN388
AbrasionBlade CutTearPuncture
X X X X
General purpose gloves provide protection for a wide variety of applications and tasks from dirt and mechanical hazards such as sharp or abrasive objects. Protection can vary depending on the materials and construction of the glove. Different coatings can also improve grip and reduce hand fatigue. Some coatings are also liquid proof, but generally offer low levels of chemical protection.
General Purpose Gloves
US Regulatory Standards—ANSI/ISEA 105-2005 European Regulatory Standards – EN388
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
D
B
C
155
Inspection Gloves
A. Radnor® 100% Cotton Inspection Gloves100% Cotton fabric available in three weightsTwo piece reversible pattern with unhemmed cuff measures 9” in lengthIdeal for inspection or used as a liner under disposable and unsupported liquid proof glovesSold per dozen
Part Number Description Size PriceRAD64057213 Lightweight Men’s 5.40 RAD64057214 Lightweight Ladies’ 5.16RAD64057222 Mediumweight Men’s 7.56 RAD64057221 Mediumweight Ladies’ 7.08RAD64057215 Heavyweight Men’s 9.60 RAD64057216 Heavyweight Ladies’ 8.28
B. Radnor® 100% Cotton Inspection Gloves with Extended Cuff100% Cotton fabric available in three weightsTwo piece reversible pattern with unhemmed cuff in extended lengthsIdeal for inspection or used as a liner under disposable and unsupported liquid proof glovesSold per dozen
Part Number Description Size PriceRAD64057238 14” Lightweight Men’s 7.56 RAD64057236 12” Mediumweight Men’s 10.32 RAD64057240 12” Heavyweight Men’s 14.16
C. Radnor® 100% Cotton White Dress GlovesHeavyweight 100% cotton fabric constructionFinger side walls (Fourchettes) provide a Dress Glove fit that enhances sensitivityNo raised stitchingSanitary white for lab and critical environmentsSold per dozen
Part Number Description Size PriceRAD64057230 Heavyweight XSmall 15.96 RAD64057231 Heavyweight Small 15.96 RAD64057232 Heavyweight Medium 15.96 RAD64057233 Heavyweight Large 15.96 RAD64057234 Heavyweight XLarge 15.96
D. Radnor® Nylon Inspection Gloves40 Denier Tricot fabricTwo piece reversible pattern with rolled hemNylon is stretchable and absorbs perspiration to keep hands comfortableIdeal for low-lint and product protectionSold per dozen
Part Number Description Size PriceRAD64057217 Lint-Free Nylon Small 5.40 RAD64057218 Lint-Free Nylon Medium 5.40 RAD64057219 Lint-Free Nylon Large 5.40 RAD64057220 Lint-Free Nylon XLarge 5.64
E. Ansell KleenKnit™ Low-Linting Nylon Lightweight GlovesFine-denier stretch nylon made of continuous filament fibers to help prevent linting inherent in most spun yardsOffer unsurpassed tactile sensitivity and excellent dexterityIdeal for computer manufacturing, film processing, automotive paint rooms, electronics and electrical assemblySold per pair
Part Number Description Size PriceANE78-200-7 KleenKnit™ Nylon Lightweight Small (7) 1.42 ANE78-200-9 KleenKnit™ Nylon Lightweight Large (9) 1.42
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
A
F
E
D
B
C
D
156
Jersey Gloves
A. Brown Jersey GlovesChoose 100% cotton jersey or cotton/poly blendSoft and comfortableAvailable in two weights; 9 oz. standard or 10 oz. premium Clute cut with a knitwristGeneral purpose and light abrasion applications
Part Number Description Size PriceRAD64057133 10 oz 100% Cotton Brown Jersey Men’s 1.35 RAD64057132 10 oz 100% Cotton Brown Jersey Ladies’ 1.33RAD64057129 9 oz 100% Cotton Brown Jersey Men’s 0.88 RAD64057128 9 oz 100% Cotton Brown Jersey Ladies’ 0.86RAD64057334 9 oz Cotton/Poly Brown Jersey Men’s 0.67
B. 13 oz. Fleece Lined Brown Jersey Gloves13 oz. Cotton/poly jersey with red fleece lining Clute cut with a knitwristProtection to suit a variety of workplace applications
Part Number Description Size PriceRAD64057135 13 oz Fleece Lined Brown Jersey Large 1.37 RAD64057136 13 oz Fleece Lined Brown Jersey XLarge 1.43
C. 14 oz. Fleece Lined Brown Jersey Gloves14 oz. 100% cotton jersey with red fleece liningLining provides added warmth and comfortSlip-on cuff
Part Number Description Size PriceRAD64057139 14 oz Fleece Lined Brown Jersey Men’s 1.71
D. PVC Dotted Jersey GlovesCotton/poly jersey with PVC dotted palm, thumb and index finger Available in two weights; 9 oz. standard or 10 oz. premium Clute cut and knitwrist
Part Number Description Size PriceRAD64057153 10 oz Dotted Brown Jersey Men’s 1.35 RAD64057152 10 oz Dotted Brown Jersey Ladies’ 1.33RAD64057156 9 oz Dotted Brown Jersey Men’s 0.96 RAD64057155 9 oz Dotted Brown Jersey Ladies’ 0.94
E. Reversible Brown Jersey GlovesSoft and comfortable jerseyTwo-piece, 9 oz. cotton/poly jersey is reversible for longer wearKnitwrist
Part Number Description Size PriceRAD64057223 9 oz Reversible Brown Jersey Men’s 0.65 RAD64057148 9 oz Reversible Brown Jersey Ladies’ 0.63
F. Reversible White Jersey GlovesTwo-piece 100% cotton jersey is reversibleKnitwrist
Part Number Description Size PriceRAD64057146 7 oz Reversible White Jersey Men’s 0.78 RAD64057142 5.5 oz Reversible White Jersey Ladies’ 0.73
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
BA
INFORMATION FOR YOUR SAFETY
157
Canvas Gloves
D
C
Gauntlet
Bandtop
Weights of cotton gloves are designated by ounces. The most common weights are 8, 10 and 12 and represent a uniform industry standard of weighing fabrics by the yard. This means there are 8, 10 and 12 ounces per square yard. This is referred to as the true weight of cotton.
Cotton Gloves
A. Cotton Canvas GlovesChoose from cotton/poly blend or 100% cotton in three different weights; 8 oz. ,10 oz. or 12 oz. Comfortable work gloves for protection in light-duty applicationsGloves are clute cut with the exception of the reversible styleAvailable with knitwrist, bandtop or gauntlet cuffs
Part Number Description Size PriceRAD64057100 8 oz Cotton/Poly, Knitwrist Men’s 0.82 RAD64057101 8 oz Cotton/Poly, Knitwrist Ladies’ 0.80 RAD64057118 8 oz Cotton/Poly, Reversible Knitwrist Men’s 0.84 RAD64057173 8 oz Cotton/Poly, Bandtop Men’s 0.94 RAD64057102 10 oz Cotton/Poly, Knitwrist Men’s 1.00 RAD64057107 12 oz Cotton/Poly, Knitwrist Men’s 1.22RAD64057110 8 oz 100% Cotton, Knitwrist Men’s 1.06 RAD64057104 10 oz 100% Cotton, Knitwrist Men’s 1.18 RAD64057114 12 oz 100% Cotton, Knitwrist Men’s 1.33 RAD64057122 12 oz 100% Cotton, Gauntlet Men’s 1.75
B. PVC Dotted Cotton Canvas Gloves8 oz. Cotton/poly with PVC dots on palm side and back of thumb, and forefinger for improved grip and longer wearClute cut with knitwrist
Part Number Description Size PriceRAD64057125 8 oz Dotted Cotton Canvas Men’s 0.96 RAD64057124 8 oz Dotted Cotton Canvas Ladies’ 0.94
C. Cotton Corded Double Palm Gloves18 oz. Mediumweight poly/cotton fully corded Corduroy exterior resists oil and dirtAvailable in white, or choose hi-viz green or orange for nighttime or use in low-light conditionsClute cut with knitwrist
Part Number Description Size PriceRAD64057389 18 oz Cotton Corded Double Palm, White Large 2.01 RAD64057282 18 oz Cotton Corded, Hi-Viz Orange Large 2.37 RAD64057283 18 oz Cotton Corded, Hi-Viz Green Large 2.37
D. Cotton Canvas Double Palm Gloves18 oz. Mediumweight poly/cotton shellBlended shell gives excellent wear and less moisture absorption than 100% cottonNap-In double palmClute cut with red knitwrist
Part Number Description Size PriceRAD64057398 18 oz Nap-In Double Palm, Red Knitwrist X Large 2.43
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
A
D
B
C
INFORMATION FOR YOUR SAFETY
158
Double Palms and Chore Gloves
Nap-In
Nap-Out
The degree of heat resistance a glove may offer is directly related to the duration of exposure and weight of the object being handled.
Heat Resistance Effectiveness
A. Quilted Cotton Double Palm Gloves100% Cotton palm with blended cotton/poly back, cuff and liningDouble palm provides improved wear and comfortChoose from Nap-In fabric for abrasion resistance or Nap-Out for heat protectionClute cut
Part Number Description Size PriceRAD64057202 Nap-In, Double Palm Knitwrist Men’s 1.75 RAD64057203 Nap-In, Double Palm Band Top Men’s 1.86RAD64057200 Nap-Out, Double Palm Band Top Men’s 2.12 RAD64057201 Nap-Out, Double Palm Gauntlet Men’s 2.29
B. Full Gold Chore Gloves 18 oz. Cotton/polyester blend full chore glove Chore gloves keep hands warmer and provide more cushioning comfort than canvas aloneClute cut with standard lining
Part Number Description Size PriceRAD64057192 18 oz Full Gold Chore, Knitwrist Men’s 2.14
C. Canvas Back Gold Chore Gloves18 oz. Cotton/polyester blended canvas back chore glovesStandard lining offers comfort and good heat dispersionClute cut
Part Number Description Size PriceRAD64057190 18 oz Canvas Back Chore, Blue Knitwrist Men’s 1.96 RAD64057228 18 oz Canvas Back Gold Chore, Gauntlet Men’s 2.65
D. 18 oz. Chore GlovesSoft and comfortable fleece with knitwristSuperior performance in both cold and medium heat applicationsGloves offer ideal protection for rough jobs
Part Number Description Size PriceRAD64057227 18 oz. Chore, Knitwrist Men’s 3.92
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
yction
Co
Co
Co
Co
Co
Connfinfinfinned S
paceW
oW
oW
oW
oW
oW
oW
rrkrkrkwe
wwe
we
weeeaararararaar
Products
A
F
E
D
B
C
INFORMATION FOR YOUR SAFETY
159
Hot Mill Gloves
Burlap Lined
All cotton fabric used in the production of Hot Mills is napped. Napping is the pulling-up of fibers from the base weave resulting in a fuzzy, raised surface. Nap-In or Nap-Out refers to the direction of the napping, either facing inside or outside. Nap-In fabric provides better abrasion resistance and outwears Nap-Out fabric. Nap-Out fabric provides greater heat protection.
Nap-In Versus Nap-Out
E. Honeywell Grip N® Hot Mill Nitrile Coated GlovesKnit design allow hands to breathe, unlike cut and sewn hot millsNitrile Grip N® Coating on palm provides excellent grip and longer lifeProvide protection against intermittent heat up to 400°F
Part Number Description Size PriceNOS51/7147 Grip N® Coated, Knitwrist Men’s 6.37
F. Honeywell Grip N® DuPont™ Kevlar® Hot Mill GlovesBlended design puts DuPont™ Kevlar® on outside for cut/slash protection and cotton/polyester on the inside for worker comfortNitrile Grip N® Coating on palm provides excellent grip and longer lifeAmbidextrous to enhance value
Part Number Description Size PriceNOS52/7457 Grip N® Coated-Both Sides, Lint-Free, Knitwrist Men’s 16.22
A. Radnor® 22 oz. Mediumweight Hot Mill Gloves22 oz. Hot mills have 100% cotton palm with blended cotton/poly back, cuff and liningTwo layers of fabric in the palm guard against moderate heat, abrasion and wearClute cut with knuckle strap
Part Number Description Size PriceRAD64057194 22 oz Nap-Out Hot Mill, Band Top Men’s 2.14
B. Radnor® 24 oz. Regular Weight Hot Mill Gloves100% Cotton outer shell with blended cotton/poly liningTwo layers in the palm protect against extended exposure to moderate heatGreen palm and forefinger helps hide dirt for longer wearClute cut
Part Number Description Size PriceRAD64057193 24 oz Nap-In Hot Mill, Band Top Men’s 2.39RAD64057206 24 oz Nap-Out Hot Mill, Band Top Men’s 2.26 RAD64057207 24 oz Nap-Out Hot Mill, Gauntlet Men’s 2.71RAD64057198 24 oz Nap-Out Green Palm Hot Mill, Band Top Men’s 3.12 RAD64057199 24 oz Nap-Out Green Palm Hot Mill, Gauntlet Men’s 3.29
C. Radnor® Burlap Lined Hot Mill GlovesThree layer construction on palm made from cotton canvas and burlap liningBurlap lining creates an air pocket affording increased heat protectionKnuckle strap provides protection to knuckles and back of handClute cut
Part Number Description Size PriceRAD64057195 28 oz Nap-Out Burlap Lined Hot Mill, Band Top Men’s 2.53 RAD64057204 32 oz Nap-Out Burlap Lined Hot Mill, Band Top Men’s 2.94
D. Radnor® 30 oz. Extra-Heavyweight Hot Mill Gloves30 oz. Hot mills have 100% cotton outer shell and cotton/poly blend in mid layer and inner liningThree layer construction provides improved heat dispersion and comfortClute cut with knuckle strap
Part Number Description Size PriceRAD64057196 30 oz Nap-Out Hot Mill, Band Top Men’s 3.24 RAD64057197 30 oz Nap-Out Hot Mill, Gauntlet Men’s 3.59
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
F
E
D
B
C
A
Pro
tect
ion
Pro
tect
ion
A
160
String Knit Gloves
A. Natural White String Knit GlovesCotton/polyester blendFabric weights range from light to heavy Ambidextrous for longer wearGreat for warehousing, general maintenance, parts handling, assembly and food processing
Part Number Description Size PriceRAD64057175 Natural Lightweight String Men’s 0.39 RAD64057176 Natural Lightweight String Ladies’ 0.39RAD64057181 Natural Mediumweight String Men’s 0.45 RAD64057182 Natural Mediumweight String Ladies’ 0.45RAD64057178 Natural Heavyweight String Men’s 0.59 RAD64057179 Natural Heavyweight String Ladies’ 0.59
B. Gray String Knit GlovesCotton/polyester blend Gray color hides dirt for extended useAmbidextrous for longer wearFor material handling, parts assembly and applications in refrigerated areas
Part Number Description Size PriceRAD64057209 Gray Mediumweight String Men’s 0.43 RAD64057208 Gray Mediumweight String Ladies’ 0.43RAD64057211 Gray Heavyweight String Men’s 0.57 RAD64057212 Gray Heavyweight String Ladies’ 0.57
C. Bleached White String Knit GlovesRegular weight cotton/polyester blendBleached whiteAmbidextrous for longer wearFor use in food processing applications, where a clean appearance is vital and replacement is frequent
Part Number Description Size PriceRAD64057266 Bleached White String Men’s 0.47 RAD64057267 Bleached White String Ladies’ 0.47
D. 100% Cotton String Knit GlovesRegular weight 100% cottonAmbidextrous for longer wearFor light heat applications, parts handling, shipping and receiving, food processing and applications in refrigerated areas
Part Number Description Size PriceRAD64057004 100% Cotton String Men’s 0.65 RAD64057005 100% Cotton String Ladies’ 0.65
E. Fingerless String Knit GlovesStandardweight cotton/polyester blend Fingerless for enhanced dexterityAmbidextrous for longer wearUse as a glove or glove liner
Part Number Description Size PriceRAD64056423 Fingerless String Men’s 0.55 RAD64056424 Fingerless String Ladies’ 0.55
F. Glove Mate™ Cotton LinerMade from 100% cottonVersatile ambidextrous glove linerHighly absorbentProvides added protection against chafing and dry skin commonly caused by hand perspiration
Part Number Description Packaged PriceRAD64057268 Glove Mate™ Liner 100/bx 19.05
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
nR
espiratoryyP
rotectiooonononnnnInInnsssstststs
eem
ennnnnntntnttationC
onnnfinfid dSSSSSS
pS
pS
pS
ppacacccccceeeeeeeFall P
roteainm
entS
upppliliesesesesS
torage
A
B
D
F
E
C
161
General Purpose Coated Gloves
A. PVC Dot String GlovesMediumweight cotton/polyester blend Choose from PVC dots on one side for a great grip, or two sides for longer wearWashable
Part Number Description Size PriceRAD64057184 One-Sided PVC Dot Men’s 0.59 RAD64057185 One-Sided PVC Dot Ladies’ 0.59RAD64057187 Two-Sided PVC Dot Men’s 0.69 RAD64057188 Two-Sided PVC Dot Ladies’ 0.69
B. Honeycomb String Knit GlovesOrange polyester string knitPVC criss-cross pattern on two sides for enhanced grip
Part Number Description Size PriceRAD64057016 Honeycomb String Knit Small 1.24 RAD64057017 Honeycomb String Knit Medium 1.24 RAD64057018 Honeycomb String Knit Large 1.24 RAD64057019 Honeycomb String Knit XLarge 1.24
C. PVC Block String GlovesCotton/polyester blend PVC block coating on front and backGreat general purpose work glovesWashable
Part Number Description Size PriceRAD64057007 PVC Block Men’s 0.82 RAD64057008 PVC Block Ladies’ 0.82
D. PVC Palm Coated GlovesNatural color string knit cotton/poly blendFully coated brown PVC on one sideAmbidextrousWashable
Part Number Description Size PriceRAD64057009 PVC Palm Coated Men’s 1.02 RAD64057010 PVC Palm Coated Ladies’ 1.02
E. Economy Latex Coated String GlovesEconomical white cotton/poly 7 cut string knit shellLight latex palm coating help improve grip for material handlingOffer dexterity, comfort and breathability at a great price
Part Number Description Size PriceRAD64057011 Rubber Coated String Men’s 1.14 RAD64057012 Rubber Coated String Ladies’ 1.14
F. Gray Latex Coated String GlovesSeamless gray 10 gauge cotton/poly string knit shell Textured latex coating on the palm and fingertips for enhanced wet or dry gripGray color helps hide dirt, while the latex coating provides puncture and abrasion resistanceNon-coated back sustains ventilation
Part Number Description Size PriceRAD64057876 Latex Coated String, Gray with Black Small 1.90 RAD64057877 Latex Coated String, Gray with Black Medium 1.90 RAD64057878 Latex Coated String, Gray with Black Large 1.90 RAD64057879 Latex Coated String, Gray with Black XLarge 1.90RAD64056516 Latex Coated String, Gray with Blue Small 1.90 RAD64056517 Latex Coated String, Gray with Blue Medium 1.90 RAD64056518 Latex Coated String, Gray with Blue Large 1.90 RAD64056519 Latex Coated String, Gray with Blue XLarge 1.90
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
162
General Purpose Coated GlovesA B
C D
F. Memphis FLEX TUFF® Gloves10 Gauge cotton with a polyester shellTextured latex palm and fingertips dippedLong-lasting comfort with sure grip
Part Number Description Size PriceMEG9680S FLEX TUFF® Small 3.23 MEG9680M FLEX TUFF® Medium 3.23 MEG9680L FLEX TUFF® Largel 3.23 MEG9680XL FLEX TUFF® XLarge 3.23
E. Ansell Power Flex® GlovesErgonomically designed with a soft gray, seamless poly/cotton knit liner that is palm-dipped with a textured natural rubber coatingFully coated thumb provides added protection in this high-risk areaOffer a combination of abrasion and puncture resistance with superior wet and dry gripUncoated back allows air to circulate, keeping hands cooler and dryerProvide exceptional fit and comfort CAUTION: Natural rubber latex may cause allergic reactions in some individuals
Part Number Description Size PriceANE80-100-6 Power Flex® XSmall 3.83 ANE80-100-7 Power Flex® Small 3.83ANE80-100-8 Power Flex® Medium 3.83 ANE80-100-9 Power Flex® Large 3.83 ANE80-100-10 Power Flex® XLarge 3.83
® Glovesyester shell
EF
A. SHOWA® ATLAS Fit® 300 GlovesNatural rubber palm coating with wrinkle gripGray with blue coating10 Gauge seamless knitted linerErgonomic shapeExcellent wet and dry gripMachine washable
Part Number Description Size PriceB13300S-07 SHOWA® ATLAS Fit® 300 Small 2.68 B13300M-08 SHOWA® ATLAS Fit® 300 Medium 2.68 B13300L-09 SHOWA® ATLAS Fit® 300 Large 2.68 B13300XL-10 SHOWA® ATLAS Fit® 300 XLarge 2.68 B13300XXL-11 SHOWA® ATLAS Fit® 300 2XLarge 2.68
B. SHOWA® ATLAS® XTRA 305 GlovesNatural rubber palm and knuckle coating with wrinkle gripGray with blue coating10 Gauge seamless knitted linerErgonomic shapeExcellent wet and dry gripMachine washable
Part Number Description Size PriceB13305S-07 SHOWA® ATLAS® XTRA 305 Small 3.64 B13305M-08 SHOWA® ATLAS® XTRA 305 Medium 3.64 B13305L-09 SHOWA® ATLAS® XTRA 305 Large 3.64 B13305XL-10 SHOWA® ATLAS® XTRA 305 XLarge 3.64
C. SHOWA® ATLAS Hi-Viz Grip® 317 GlovesHi-Viz 10 gauge bright yellow knitted liner with orange natural rubber palm coatingExcellent wet and dry wrinkle gripGreat for low light visibilityLuminous stamp
Part Number Description Size PriceB13317S-07 SHOWA® ATLAS Hi-Viz Grip® 317 Small 3.81 B13317M-08 SHOWA® ATLAS Hi-Viz Grip® 317 Medium 3.81 B13317L-09 SHOWA® ATLAS Hi-Viz Grip® 317 Large 3.81 B13317XL-10 SHOWA® ATLAS Hi-Viz Grip® 317 XLarge 3.81
D. SHOWA® ATLAS ReGrip® 330 GlovesNatural rubber palm coating with wrinkle gripGray with black coating10 Gauge seamless knitted linerReinforced thumb crotch for added durabilityErgonomic shapeExcellent wet and dry grip
Part Number Description Size PriceB13330M-08 SHOWA® ATLAS ReGrip® 330 Medium 3.81 B13330L-09 SHOWA® ATLAS ReGrip® 330 Large 3.81 B13330XL-10 SHOWA® ATLAS ReGrip® 330 XLarge 3.81
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
D
B
C
163
General Purpose Coated Gloves
A. SHOWA® ATLAS Fit® 350 GlovesNitrile palm coating with textured gripGray with green coating10 Gauge seamless knitted linerErgonomic shape and abrasion resistantMachine washable
Part Number Description Size PriceB13350S-07 SHOWA® ATLAS Fit® 350 Small 3.04 B13350M-08 SHOWA® ATLAS Fit® 350 Medium 3.04 B13350L-09 SHOWA® ATLAS Fit® 350 Large 3.04 B13350XL-10 SHOWA® ATLAS Fit® 350 XLarge 3.04
B. Best® Nitri-Flex® Plus GlovesPalm-dipped in nitrile delivers comfort and heavy-duty abrasion and puncture resistanceIdeal for general construction, facilities maintenance, warehouse and shipping/receiving jobsOne of the industries most comfortable and durable all-purpose work gloves
Part Number Description Size PriceB134600-07 Nitri-Flex® Plus Small 3.87 B134600-08 Nitri-Flex® Plus Medium 3.87 B134600-09 Nitri-Flex® Plus Large 3.87 B134600-10 Nitri-Flex® Plus XLarge 3.87
C. Honeywell Smitty® GlovesPrecision blended cotton/polyester shell can be laundered or dry cleaned with minimal shrinkageNitrile coating on palm provides a sure grip, good abrasion resistance and longer lifeMeet a variety of applications and is versatile enough to replace a wide range of glove styles
Part Number Description Size PriceNOS81/1162M Smitty® Men’s 2.46 NOS81/1162S Smitty® Ladies’ 2.46
D. Honeywell Nitri-Kote® GlovesSeamless blended cotton/polyester string knit shell reduces shrinkageUnique nitrile coating allows gloves to be fully coated, yet remain breathableAmbidextrous design allows longer wear with four wearing surfaces
Part Number Description Size PriceNOS78/1142XS Nitri-Kote® Cadet 2.46 NOS78/1142S Nitri-Kote® Ladies’ 2.46 NOS78/1142M Nitri-Kote® Men’s 2.46 NOS78/1142XL Nitri-Kote® XLarge 2.46
E. Honeywell Grip N® GlovesBlue PVC N Tread coating has non-skid grip and outstanding abrasion resistanceReversible seamless design reduces chafing and extends the life of the gloveComply with USDA and FDA regulations, 21CFR for use in food processing
Part Number Description Size PriceNOSK511M Grip N® Men’s 1.96 NOSK511S Grip N® Ladies’ 1.96
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
164
General Purpose Coated GlovesA
D
B
C
A. Premium Polyurethane Palm Coated GlovesSeamless 15 gauge nylon knit liner provides breathable comfort and enhanced tactile sensitivity PU palm coating offers superior resistance to abrasion and tearIdeal for intricate small parts assembly and handling of electronic circuitry
Part Number Description Size PriceRAD64056380 White PU Palm Coated, White Liner XSmall 1.86 RAD64056381 White PU Palm Coated, White Liner Small 1.86 RAD64056382 White PU Palm Coated, White Liner Medium 1.86 RAD64056383 White PU Palm Coated, White Liner Large 1.86 RAD64056384 White PU Palm Coated, White Liner XLarge 1.86RAD64056385 Gray PU Palm Coated, Black Liner XSmall 1.86 RAD64056386 Gray PU Palm Coated, Black Liner Small 1.86 RAD64056387 Gray PU Palm Coated, Black Liner Medium 1.86 RAD64056388 Gray PU Palm Coated, Black Liner Large 1.86 RAD64056389 Gray PU Palm Coated, Black Liner XLarge 1.86 RAD64056490 Gray PU Palm Coated, Black Liner 2XLarge 1.86
B. Economy Polyurethane Palm Coated GlovesSeamless 13 gauge nylon knit liner PU palm coating is light for outstanding tactility and dexterity to reduce hand fatigueCoating provides a high level of abrasion resistance
Part Number Description Size PriceRAD64056361 White PU Palm Coated, White Liner Small 1.25 RAD64056362 White PU Palm Coated, White Liner Medium 1.25 RAD64056363 White PU Palm Coated, White Liner Large 1.25 RAD64056364 White PU Palm Coated, White Liner XLarge 1.25RAD64056366 Black PU Palm Coated, Black Liner Small 1.25 RAD64056367 Black PU Palm Coated, Black Liner Medium 1.25 RAD64056368 Black PU Palm Coated, Black Liner Large 1.25 RAD64056369 Black PU Palm Coated, Black Liner XLarge 1.25 RAD64056370 Black PU Palm Coated, Black Liner 2XLarge 1.25RAD64056375 Gray PU Palm Coated, Gray Liner Small 1.25 RAD64056376 Gray PU Palm Coated, Gray Liner Medium 1.25 RAD64056377 Gray PU Palm Coated, Gray Liner Large 1.25 RAD64056378 Gray PU Palm Coated, Gray Liner XLarge 1.25 RAD64056379 Gray PU Palm Coated, Gray Liner 2XLarge 1.25
C. Premium Foam Nitrile Palm Coated GlovesSeamless 15 gauge nylon knit liner is breathable with an exceptional fit for comfortFoam nitrile palm coating is designed to channel oil away from the glove surface to improve gripGreat for applications requiring a high degree of dexterity and sensitivity, especially when handling small oily parts and components
Part Number Description Size PriceRAD64056390 Gray Foam Nitrile Palm Coated, White Liner XSmall 3.27 RAD64056391 Gray Foam Nitrile Palm Coated, White Liner Small 3.27 RAD64056392 Gray Foam Nitrile Palm Coated, White Liner Medium 3.27 RAD64056393 Gray Foam Nitrile Palm Coated, White Liner Large 3.27 RAD64056394 Gray Foam Nitrile Palm Coated, White Liner XLarge 3.27 RAD64056395 Gray Foam Nitrile Palm Coated, White Liner 2XLarge 3.27RAD64056396 Black Foam Nitrile Palm Coated, S&P Liner Small 3.43 RAD64056397 Black Foam Nitrile Palm Coated, S&P Liner Medium 3.43 RAD64056398 Black Foam Nitrile Palm Coated, S&P Liner Large 3.43 RAD64056399 Black Foam Nitrile Palm Coated, S&P Liner XLarge 3.43
D. Economy Foam Nitrile Palm Coated GlovesSeamless 13 gauge nylon knit linerBlack foam nitrile palm coating provides improved grip in wet or light oil applicationsGray shell helps to conceal dirt and promote longer wear
Part Number Description Size PriceRAD64056000 Black Foam Nitrile Palm Coated, Gray Liner XSmall 1.59 RAD64056001 Black Foam Nitrile Palm Coated, Gray Liner Small 1.59 RAD64056002 Black Foam Nitrile Palm Coated, Gray Liner Medium 1.59 RAD64056003 Black Foam Nitrile Palm Coated, Gray Liner Large 1.59 RAD64056004 Black Foam Nitrile Palm Coated, Gray Liner XLarge 1.59 RAD64056005 Black Foam Nitrile Palm Coated, Gray Liner 2XLarge 1.59
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
165
General Purpose Coated Gloves
A
B
C
AA. Radnor® Nitrile Palm Coated Gloves
Seamless white 13 gauge nylon knit liner offers high level of dexterity Durable gray nitrile coating resists abrasion and repels oil for improved gripGood for general purpose assembly and parts handling
Part Number Description Size PriceRAD64056347 Gray Nitrile Palm Coated, White Liner XSmall 1.57 RAD64056348 Gray Nitrile Palm Coated, White Liner Small 1.57 RAD64056349 Gray Nitrile Palm Coated, White Liner Medium 1.57 RAD64056350 Gray Nitrile Palm Coated, White Liner Large 1.57 RAD64056351 Gray Nitrile Palm Coated, White Liner XLarge 1.57
B. Radnor® Latex Palm Coated GlovesSeamless gray 13 gauge nylon liner provides exceptional fit and feel Crinkle black latex coating on the palm and fingertips provides superb flexibilityDurable hand protection with excellent grip
Part Number Description Size PriceRAD64056506 Black Latex Palm Coated, Gray Liner Small 2.47 RAD64056507 Black Latex Palm Coated, Gray Liner Medium 2.47 RAD64056508 Black Latex Palm Coated, Gray Liner Large 2.47 RAD64056509 Black Latex Palm Coated, Gray Liner XLarge 2.47
C. Radnor® Air Infused PVC Palm Coated Gloves Seamless black 15 gauge nylon knit liner provides great dexterity Blue Air Infused PVC coating draws moisture and liquid away from the surface for superior wet gripOpen back for ventilation and wearer comfort
Part Number Description Size PriceRAD64056501 Blue PVC Palm Coated, Black Liner Small 2.73 RAD64056502 Blue PVC Palm Coated, Black Liner Medium 2.73 RAD64056503 Blue PVC Palm Coated, Black Liner Large 2.73 RAD64056504 Blue PVC Palm Coated, Black Liner XLarge 2.73 RAD64056505 Blue PVC Palm Coated, Black Liner 2XLarge 2.73
gotection
py
Pr
Pr
Prrrototototototeeeecection
CCCo
Co
Co
Confined S
pace
B
C
F
D. Best® Nitri-Flex® Lite GlovesNitrile palms provide a good grip and resistance to oil and abrasionsSeamless nylon liner provides outstanding comfort and cleanlinessOpen back allows hands to breathe for added comfort
Part Number Description Size PriceB134500-06 Nitri-Flex® Lite XSmall 4.62 B134500-07 Nitri-Flex® Lite Small 4.62 B134500-08 Nitri-Flex® Lite Medium 4.62 B134500-09 Nitri-Flex® Lite Large 4.62 B134500-10 Nitri-Flex® Lite XLarge 4.62
E. Best® ATLAS Ventulus® 380 GlovesPatented waffle pattern foamed nitrile palm coatingBlue nylon liner with black coating13 Gauge lint-free seamless knitted linerGreat grip in oily environmentsBreathable
Part Number Description Size PriceB13380S-06 ATLAS Ventulus® 380 Small 5.19 B13380M-07 ATLAS Ventulus® 380 Medium 5.19 B13380L-08 ATLAS Ventulus® 380 Large 5.19 B13380XL-09 ATLAS Ventulus® 380 XLarge 5.19
F. SHOWA® Nitrile Foam Grip 377 GlovesFully dipped nitrile coated glove is dipped in sky blue thin-nitrile, and has black foam nitrile coating in the palm areaThin nitrile coating offers limited protection against a wide range of chemical substances while the superior foam overdip ensures excellent grip even in oily applicationsAn elastic knitwrist holds it firmly on the arm for enhanced fit
Part Number Description Size PriceB13377M-07 SHOWA® Nitrile Foam Grip 377 Medium 6.91 B13377L-08 SHOWA® Nitrile Foam Grip 377 Large 6.91 B13377XL-09 SHOWA® Nitrile Foam Grip 377 XLarge 6.91 B13377XXL-10 SHOWA® Nitrile Foam Grip 377 2XLarge 6.91
E
D
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
166
General Purpose Coated GlovesA
FE
DC
E
C
F. HyFlex® 11-900 GlovesFine-gauge stretch nylon liner improves worker fit and productivityNitrile (NBR) coating provides excellent abrasion resistance and oil repellencyUse in applications such as automotive, fabricated metal or electronics assembly and handling of small to medium sized parts Gloves and packaging are silicone-free
Part Number Description Size PriceANE11-900-6 HyFlex® 11-900 6 3.89 ANE11-900-7 HyFlex® 11-900 7 3.89 ANE11-900-8 HyFlex® 11-900 8 3.89 ANE11-900-9 HyFlex® 11-900 9 3.89 ANE11-900-10 HyFlex® 11-900 10 3.89
A. HyFlex® 11-920 GlovesSpecial nylon liner provides softness, comfort and breathability with an ergonomic, natural fitPatent-pending Ansell Grip Technology® (AGT) nitrile coating repels oils and other lubricants away from the surface via microscopic channelsIncrease surface contact for enhanced grip and control with less strainPalm coating prevents oil penetration and reduces the risk of dermatitis and liquid exposureMulti-layer dipping process provides high abrasion resistance and increases wear life
Part Number Description Size PriceANE11-920-6 HyFlex® 11-920 6 4.53 ANE11-920-7 HyFlex® 11-920 7 4.53 ANE11-920-8 HyFlex® 11-920 8 4.53 ANE11-920-9 HyFlex® 11-920 9 4.53 ANE11-920-10 HyFlex® 11-920 10 4.53 ANE11-920-11 HyFlex® 11-920 11 4.53
B. HyFlex® 11-600 GlovesUltra-cool black stretch nylon liner palm dipped with a gray polyurethane coatingThe protection of a glove with virtually bare-handed dexterityIdeal for handling of electronic components and precision assembly
Part Number Description Size PriceANE11-600-6GRY HyFlex® 11-600 6 2.98 ANE11-600-7GRY HyFlex® 11-600 7 2.98 ANE11-600-8GRY HyFlex® 11-600 8 2.98 ANE11-600-9GRY HyFlex® 11-600 9 2.98 ANE11-600-10GRY HyFlex® 11-600 10 2.98 ANE11-600-11GRY HyFlex® 11-600 11 2.98
C. SensiLite® 48-101 GlovesNylon liner and polyurethane coating provides excellent dexterity and flexibility, especially when working with small partsLightweight and comfortable with superior abrasion resistanceErgonomically designed to wick moisture away from hands and provide workers with superior all-day comfort
Part Number Description Size PriceANE48-101-6 SensiLite® 48-101 6 2.17 ANE48-101-7 SensiLite® 48-101 7 2.17 ANE48-101-8 SensiLite® 48-101 8 2.17 ANE48-101-9 SensiLite® 48-101 9 2.17 ANE48-101-10 SensiLite® 48-101 10 2.17 ANE48-101-11 SensiLite® 48-101 11 2.17
D. HyFlex® 11-800 GlovesSeamless white fine-gauge knit linerOriginal gray foam nitrile coating channels oil away from glove surface for a secure grip in light oil applicationsDesigned to reduce hand fatigue while providing maximum comfort and dexterity
Part Number Description Size PriceANE11-800-6 HyFlex® 11-800 6 4.85 ANE11-800-7 HyFlex® 11-800 7 4.85 ANE11-800-8 HyFlex® 11-800 8 4.85 ANE11-800-9 HyFlex® 11-800 9 4.85 ANE11-800-10 HyFlex® 11-800 10 4.85 ANE11-800-11 HyFlex® 11-800 11 4.85
E. HyFlex® 11-801 GlovesPatented Knitted Variable Stitch Design (KVSD) provides a relaxed fit in high stress areas Mold naturally to the hand, helping prevent fatigueBlack foam nitrile coating channels oil away from the glove surface for sure grip in light oil applicationsIndustry-friendly color hides dirt and grime to increase time between laundry cycles
Part Number Description Size PriceANE11-801-6 HyFlex® 11-801 6 4.85 ANE11-801-7 HyFlex® 11-801 7 4.85 ANE11-801-8 HyFlex® 11-801 8 4.85 ANE11-801-9 HyFlex® 11-801 9 4.85 ANE11-801-10 HyFlex® 11-801 10 4.85 ANE11-801-11 HyFlex® 11-801 11 4.85
D
F
A B
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
167
General Purpose Coated Gloves
A. Zorb-IT® Sponge Nitrile GlovesErgo-designed, breathable nylon liner with sponge nitrile technologyExtra-absorbent nitrile dip conforms and adheres to the nylon shellBeat the competition in launderings nearly three-to-oneAbsorb nearly twice as much oil and grease as other flat dip nitrile glovesThey don’t de-laminate after only a few washes, and they won’t shrink
Part Number Description Size PriceB134550-06 Zorb-IT® XSmall 4.06 B134550-07 Zorb-IT® Small 4.06 B134550-08 Zorb-IT® Medium 4.06 B134550-09 Zorb-IT® Large 4.06 B134550-10 Zorb-IT® XLarge 4.06
B. Zorb-IT® Extra GlovesErgo-designed, breathable nylon liner with sponge nitrile technology Three-quarter dip is deeper to coat the back of the hand for improved protectionAbsorb nearly twice as much oil and grease as other flat dipped nitrile glovesSanitized with anti-microbial bacteriostatLaunderable
Part Number Description Size PriceB134575-07 Zorb-IT® Extra Small 4.40 B134575-08 Zorb-IT® Extra Medium 4.40 B134575-09 Zorb-IT® Extra Large 4.40 B134575-10 Zorb-IT® Extra XLarge 4.40
C. Zorb-IT Black-Lite® GlovesExperience the second-skin comfort of the flat-dipped, seamless black knit linerBreathable black shell helps to minimize odors and hide grime that is consistent with everyday wear Exhibit lite oil absorbency (LTOA) sponge nitrile, innovative design, tactile sensitivity and exacting gripabilitySanitized
Part Number Description Size PriceB134540-07 Zorb-IT Black-Lite® Small 3.74 B134540-08 Zorb-IT Black-Lite® Medium 3.74 B134540-09 Zorb-IT Black-Lite® Large 3.74 B134540-10 Zorb-IT Black-Lite® XLarge 3.74
D. Zorb-IT® HV GlovesFlat-dipped sponge nitrileMaximum Oil Absorbency (MXOA)Engineered to deliver a sure-grip in the most difficult oily and greasy conditionsSponge nitrile coating stands up to repeated washings without delaminating or shrinkingBreakthrough concept in grip combined with a form-fitting, fluorescent orange shell Beat the competition nearly two-to-one in oil/grease absorption and three-to-one in launderability
Part Number Description Size PriceB134570-07 Zorb-IT® HV Small 4.11 B134570-08 Zorb-IT® HV Medium 4.11 B134570-09 Zorb-IT® HV Large 4.11 B134570-10 Zorb-IT® HV XLarge 4.11
E. SHOWA® Hi-Tech Polyurethane Dipped Gloves13 Gauge engineered nylon gloves with polyurethane palm coatingPerfect for any application requiring the ultimate in tactile discriminationIncredibly low particulate and shed factor for operations that can be compromised with inferior styles that leave behind particulates and dustChoose white with white coating or black with black coating
Part Number Description Size PriceB13BO500B-S SHOWA® Polyurethane Dipped, Black Small 2.53 B13BO500B-M SHOWA® Polyurethane Dipped, Black Medium 2.53 B13BO500B-L SHOWA® Polyurethane Dipped, Black Large 2.53 B13BO500B-XL SHOWA® Polyurethane Dipped, Black XLarge 2.53B13BO500W-S SHOWA® Polyurethane Dipped, White Small 2.53 B13BO500W-M SHOWA® Polyurethane Dipped, White Medium 2.53 B13BO500W-L SHOWA® Polyurethane Dipped, White Large 2.53 B13BO500W-XL SHOWA® Polyurethane Dipped, White XLarge 2.53
A
C D
B
E
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
D
168
General Purpose Coated GlovesA
B
C
PIP34-844
PIP34-845
PIP34-874PIP34-875
A. MaxiFlex® Endurance by ATG® Gloves15 Gauge gray seamless knit nylon liner Black micro-foam nitrile coated palm and finger tips (PIP34-844) and black micro-foam nitrile 3⁄4 coated palm, full finger and knuckles (PIP34-845)Unique NitriDot technology on palm for excellent gripUltra-cool and very comfortable to wear, breathable coating keeps hands cool and dryExcellent dexterity, sensitivity and tactility Designed to produce minimal lint and dust Minimal penetration (strike through) keeps the liner soft on the inside of the glove
Part Number Description Size PricePIP34-844/XS MaxiFlex® Endurance by ATG®, Palm Coated XSmall 4.67 PIP34-844/S MaxiFlex® Endurance by ATG®, Palm Coated Small 4.67 PIP34-844/M MaxiFlex® Endurance by ATG®, Palm Coated Medium 4.67 PIP34-844/L MaxiFlex® Endurance by ATG®, Palm Coated Large 4.67 PIP34-844/XL MaxiFlex® Endurance by ATG®, Palm Coated XLarge 4.67PIP34-845/XS MaxiFlex® Endurance by ATG®, 3⁄4 Coated XSmall 4.97 PIP34-845/S MaxiFlex® Endurance by ATG®, 3⁄4 Coated Small 4.97 PIP34-845/M MaxiFlex® Endurance by ATG®, 3⁄4 Coated Medium 4.97 PIP34-845/L MaxiFlex® Endurance by ATG®, 3⁄4 Coated Large 4.97 PIP34-845/XL MaxiFlex® Endurance by ATG®, 3⁄4 Coated XLarge 4.97
B. MaxiFlex® Ultimate by ATG® Gloves15 Gauge gray seamless knit nylon with Lycra® linerBlack micro-foam nitrile coated palm and finger tips (PIP34-874) and black micro-foam nitrile ¾ coated palm, full finger and knuckles (PIP34-875)Ultra-cool and very comfortable to wear, breathable coating keeps hands cool and dryDesigned to produce minimal lint and dust; excellent dry gripMinimal penetration (strike through) keeps the liner soft on the inside of the gloveSilicone-free
Part Number Description Size PricePIP34-874/XS MaxiFlex® Ultimate by ATG®, Palm Coated XSmall 4.33 PIP34-874/S MaxiFlex® Ultimate by ATG®, Palm Coated Small 4.33 PIP34-874/M MaxiFlex® Ultimate by ATG®, Palm Coated Medium 4.33 PIP34-874/L MaxiFlex® Ultimate by ATG®, Palm Coated Large 4.33 PIP34-874/XL MaxiFlex® Ultimate by ATG®, Palm Coated XLarge 4.33 PIP34-874/XXL MaxiFlex® Ultimate by ATG®, Palm Coated 2XLarge 4.33PIP34-875/XS MaxiFlex® Ultimate by ATG®, 3⁄4 Coated XSmall 4.69 PIP34-875/S MaxiFlex® Ultimate by ATG®, 3⁄4 Coated Small 4.69 PIP34-875/M MaxiFlex® Ultimate by ATG®, 3⁄4 Coated Medium 4.69 PIP34-875/L MaxiFlex® Ultimate by ATG®, 3⁄4 Coated Large 4.69 PIP34-875/XL MaxiFlex® Ultimate by ATG®, 3⁄4 Coated XLarge 4.69
C. MaxiFoam™ byATG® GlovesMaxiFoam™ by ATG®, premium foam nitrile coated palm and fingertips, white seamless knit nylon liner, 15 gauge Foam nitrile dipped nylon gloves are designed to channel oil away from the glove surface for an excellent gripExcellent dexterity, sensitivity tactility and wet and dry gripDesigned to produce minimal lint and dustMinimal penetration (strike through) keeps the liner soft on the inside of the gloveMade with materials that comply with Federal regulations for food contact 21CFR, 170-199Silicone-free
Part Number Description Size PricePIP34-800/XS MaxiFoam™ by ATG® XSmall 3.87 PIP34-800/S MaxiFoam™ by ATG® Small 3.87 PIP34-800/M MaxiFoam™ by ATG® Medium 3.87 PIP34-800/L MaxiFoam™ by ATG® Large 3.87 PIP34-800/XL MaxiFoam™ by ATG® XLarge 3.87
D. G-Tek AG with MicroSurface Grip GlovesPurple nylon liner, 13 gaugeGloves feature MicroSurface, a surface treatment that provides a superior grip in dry, wet and oily conditions by reacting like tiny suction cups that attach themselves firmly to the material being handledExcellent resistance to liquid permeationOil does not penetrate the glove like foam nitrile stylesTremendous comfort and dexterityStrong protection from punctures and abrasionsSeamless nylon liner for comfort and better fitOpen back for comfort
Part Number Description Size PricePIP34-500/XS G-Tek AG with MicroSurface Grip XSmall 3.16 PIP34-500/S G-Tek AG with MicroSurface Grip Small 3.16 PIP34-500/M G-Tek AG with MicroSurface Grip Medium 3.16 PIP34-500/L G-Tek AG with MicroSurface Grip Large 3.16 PIP34-500/XL G-Tek AG with MicroSurface Grip XLarge 3.16 PIP34-500/XXL G-Tek AG with MicroSurface Grip 2XLarge 3.16
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
otectionP
rotectionC
onfineneneedd d dSSpace
169
General Purpose Coated Gloves
A
E
B
C
E
A. Memphis Ninja® Flex Gloves15 Gauge red nylon shellTextured ultra light gray natural rubber latex coating on palm and fingertipsTreated with Actifresh® to promote freshness and kill bacteriaComply with regulations for food contact
Part Number Description Size PriceMEGN9680S Ninja® Flex Small 3.31 MEGN9680M Ninja® Flex Medium 3.31 MEGN9680L Ninja® Flex Large 3.31 MEGN9680XL Ninja® Flex XLarge 3.31
B. Memphis Ninja® X Gloves15 Gauge black nylon/spandex shellBlack bi-polymer palm PU/Nitrile coating on palm and fingertipsBi-polymer coating provides a combination of durability and softnessTreated with Actifresh® to promote freshness and kill bacteria
Part Number Description Size PriceMEGN9674S Ninja® X Small 3.89 MEGN9674M Ninja® X Medium 3.89 MEGN9674L Ninja® X Large 3.89 MEGN9674XL Ninja® X XLarge 3.89
C. Memphis Ninja® HPT Gloves15 Gauge athletic grade black nylon shellBlack Proprietary (Hydropellent Technology) coating on palm and fingertipsCoating (HPT™) repels liquids while still providing a firm wet or dry gripTreated with Actifresh® to kill bacteria and promote freshness
Part Number Description Size PriceMEGN9699S Ninja® HPT Small 3.23 MEGN9699M Ninja® HPT Medium 3.23 MEGN9699L Ninja® HPT Large 3.23 MEGN9699XL Ninja® HPT XLarge 3.23
DD. Honeywell NorthFlex Foamed PVC Palm Coated Gloves
15 Gauge seamless nylon shell with a foam PVC palm coatingHigh visibility yarn and high visibility PVC coating combine to provide excellent worker-visibilityProvide exceptional grip, particularly in wet conditionsProvide good mechanical properties, including impressive abrasion resistanceSoft and flexible coating does not compromise tactility and dexterityContain no reaction-causing, natural rubber proteinsSnug knitwrist
Part Number Description Size PriceNOSNF11/7S NorthFlex Red™ Small 3.52 NOSNF11/8M NorthFlex Red™ Medium 3.52 NOSNF11/9L NorthFlex Red™ Large 3.52 NOSNF11/10XL NorthFlex Red™ XLarge 3.52 NOSNF11/11XXL NorthFlex Red™ 2XLarge 3.52NOSNF11HVY/7S NorthFlex Neon Small 4.64 NOSNF11HVY/8M NorthFlex Neon Medium 4.64 NOSNF11HVY/9L NorthFlex Neon Large 4.64 NOSNF11HVY/10XL NorthFlex Neon XLarge 4.64
E. Honeywell NorthFlex-Oil Grip™ GlovesNitrile coated glove with MicroFinish® surface is textured with thousands of microscopic pockets to disperse fluidsHigh quality seamless 100% nylon linerMicroFinish® goes beyond foamed finishes to provide oily grip that is unsurpassedDark colored liner and coatingLaunderableColor-coded cuff overstitching
Part Number Description Size PriceNOSNF35/7S NorthFlex-Oil Grip™ Small 4.84 NOSNF35/8M NorthFlex-Oil Grip™ Medium 4.84 NOSNF35/9L NorthFlex-Oil Grip™ Large 4.84 NOSNF35/10XL NorthFlex-Oil Grip™ XLarge 4.84
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
170
General Purpose Coated Gloves
A
E
B
E. Honeywell Worknit® HD GlovesNitrile coating on knit fabric offers excellent gripping and abrasion resistanceCotton lining provides superior cushioning and absorbs perspiration for greater worker comfortFlannel lined
Part Number Description Size PriceNOS85/3729M Worknit® HD, Striped Back Medium 8.75 NOS85/3729L Worknit® HD, Striped Back Large 8.75 NOS85/3729XL Worknit® HD, Striped Back XLarge 8.75
B137000-10
B137166-10
B137000P-10
E
D. Best® Nitri-Pro® NBR Coated GlovesTough-yet-flexible nitrile (NBR) coating provides superior cut, puncture, snag and abrasion resistance and excellent resistance to oil and greaseGreat replacement for medium-to-heavy-duty leather palm work glovesIn compliance with 21CFR, 170-199
Part Number Description Size PriceB137000-10 Fully Coated Smooth Finish, Knitwrist Large 3.98B137166R-10 Fully Coated Rough Finish, Safety Cuff Large 4.79 B137166-10 Fully Coated Smooth Finish, Safety Cuff Large 4.72B137199NCR-10 Fully Coated Rough Finish, Gauntlet Cuff Large 5.34 B137199NC-10 Fully Coated Smooth Finish, Gauntlet Cuff Large 5.26B137066R-09 Palm Coated Rough Finish, Safety Cuff Medium 4.62 B137066R-10 Palm Coated Rough Finish, Safety Cuff Large 4.62 B137066-09 Palm Coated Smooth Finish, Safety Cuff Medium 4.06 B137066-10 Palm Coated Smooth Finish, Safety Cuff Large 4.06B137000P-09 Palm Coated Smooth Finish, Knitwrist Medium 3.98 B137000P-10 Palm Coated Smooth Finish, Knitwrist Large 3.98
D
A. Radnor® Lightweight Nitrile Coated Gloves100% cotton interlock lining for a greater sense of touch and dexterityThinner palm coating of lightweight nitrile (NBR) provides abrasion, chemical and cut resistanceIdeal for use in light to medium fabrication, material handling and maintenance
Part Number Description Size PriceRAD64056313 Lightweight Nitrile Coated Small 2.77 RAD64056314 Lightweight Nitrile Coated Medium 2.77 RAD64056315 Lightweight Nitrile Coated Large 2.77 RAD64056316 Lightweight Nitrile Coated XLarge 2.77
B. Radnor® Palm-Coated Nitrile GlovesNitrile (NBR) rubber coating on palms provides cut, abrasion, snag and puncture resistance for handling castings or chemicals, paint manufacturing, metal treatment and varnish manufacturing applicationsFeature a 100% cotton jersey lining for comfort, even at cool temperaturesTreated with Actifresh® to help prevent odors and eliminate germs by controlling bacteria build-up, and they’re launderable
Part Number Description Size PriceRAD64056300 Palm-Coated, Knitwrist Small 3.12 RAD64056301 Palm-Coated, Knitwrist Large 3.12RAD64056304 Palm-Coated, Safety Cuff Large 3.59
C. Radnor® Fully Coated Nitrile GlovesIdeal for chemical processing, oil refining, paint manufacturing, metal treatment, petrochemical and varnish manufacturing applicationsFeature a nitrile (NBR) rubber coating on the entire glove for all-over cut, abrasion, snag and puncture resistanceComfortable 100% cotton jersey lining is treated with Actifresh® to help prevent odors and eliminate germs by controlling bacteria build-upLaunderable
Part Number Description Size PriceRAD64056308 Fully Coated, Knitwrist Large 3.26 RAD64056312 Fully Coated, Safety Cuff Large 4.02
A
C
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
171
General Purpose Coated Gloves
B
Non-Perforated
Nylon Mesh
A
C D
We are a full line distributor.
Call for all your product needs!
A. Hynit® GlovesTough nitrile coating for abrasion and cut resistanceSlip-on design with interlock knit lining is form fitting for maximum dexterity, or nylon mesh back for the ultimate in cooling comfortOutwear 8 oz. cotton 10:1, goat skin 3:1 and lighter leather 4:1
Part Number Description Size PriceANE32-105-7 Hynit® Non-Perforated Nitrile Ladies’ Medium 2.98 ANE32-105-7.5 Hynit® Non-Perforated Nitrile Ladies’ Large 2.98 ANE32-105-8 Hynit® Non-Perforated Nitrile Men’s Medium 2.98 ANE32-105-9 Hynit® Non-Perforated Nitrile Men’s Large 2.98 ANE32-105-10 Hynit® Non-Perforated Nitrile Men’s XLarge 2.98ANE32-125-7 Hynit® Perforated Nitrile Ladies’ Medium 3.30 ANE32-125-7.5 Hynit® Perforated Nitrile Ladies’ Large 3.30 ANE32-125-8 Hynit® Perforated Nitrile Men’s Medium 3.30 ANE32-125-9 Hynit® Perforated Nitrile Men’s Large 3.30 ANE32-125-10 Hynit® Perforated Nitrile Men’s XLarge 3.30ANE32-135-7 Hynit® Nylon Mesh Ladies’ Medium 3.49 ANE32-135-7.5 Hynit® Nylon Mesh Ladies’ Large 3.49 ANE32-135-8 Hynit® Nylon Mesh Men’s Medium 3.49 ANE32-135-9 Hynit® Nylon Mesh Men’s Large 3.49 ANE32-135-10 Hynit® Nylon Mesh Men’s XLarge 3.49
B. Hylite® Nitrile Coated GlovesMedium-duty, general-purpose coated gloveVersatile alternative to cotton, light leather and PVC100% cotton interlock lining offers workers added comfortNitrile coating for superior abrasion, cut and puncture resistance and textured surface for excellent dry grip
Part Number Description Size PriceANE47-400-7 Hylite® Nitrile Coated 7 4.26 ANE47-400-8 Hylite® Nitrile Coated 8 4.26 ANE47-400-8.5 Hylite® Nitrile Coated 8.5 4.26 ANE47-400-9 Hylite® Nitrile Coated 9 4.26 ANE47-400-10 Hylite® Nitrile Coated 10 4.26
C. Easy Flex® Nitrile Coated GlovesLight nitrile coating over an interlock knit jersey lining which offers a better grip than cottonLightweight and flexible and is tough enough to resist minor snags, punctures, abrasions and cuts in light-duty applicationsKnitwrist
Part Number Description Size PriceANE47-200-7 Easy Flex® Nitrile Coated 7 3.45 ANE47-200-8 Easy Flex® Nitrile Coated 8 3.45 ANE47-200-9 Easy Flex® Nitrile Coated 9 3.45 ANE47-200-10 Easy Flex® Nitrile Coated 10 3.45
D. Hycron® Nitrile Coated GlovesTwo-piece jersey glove with heavy nitrile rubber coatingSoft jersey lining is made from a two-piece pattern that eliminates seams from working areas to prevent irritation and wearIdeal for heavy-duty handling of castings, cores and fabricated metals or building materials
Part Number Description Size PriceANE27-600-8 Hycron® Palm-Coated Knitwrist Ladies’ 4.85 ANE27-600-9 Hycron® Palm-Coated Knitwrist Men’s Medium 4.85 ANE27-600-10 Hycron® Palm-Coated Knitwrist Men’s Large 4.85ANE27-602-8 Hycron® Fully-Coated Knitwrist Ladies’ 4.92 ANE27-602-9 Hycron® Fully-Coated Knitwrist Men’s Medium 4.92 ANE27-602-10 Hycron® Fully-Coated Knitwrist Men’s Large 4.92ANE27-607-8 Hycron® Palm-Coated Safety Cuff Ladies’ 5.62 ANE27-607-9 Hycron® Palm-Coated Safety Cuff Men’s Medium 5.62 ANE27-607-10 Hycron® Palm-Coated Safety Cuff Men’s Large 5.62
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
172
General Purpose Coated Glovesnfi
ned
Spa
ce
A. Best® The Original Nitty Gritty® GlovesAn excellent cost-effective replacement for leather and ordinary rubber-coated glovesSoft, cotton flannel liner is multi-dipped with a premium natural rubber coatingChoose from smooth or exclusive, induced self wrinkle finish to enhance safety and ease of handling
Part Number Description Size PriceB1363PNFW-10 Nitty Gritty® Palm-Coated Wrinkle Finish, Knitwrist Large 4.87B1366NF-10 Nitty Gritty® Palm-Coated Smooth Finish, Safety Cuff Large 4.83 B1366NFW-10 Nitty Gritty® Palm-Coated Wrinkle Finish, Safety Cuff Large 5.26
C. Ansell Golden Grab-It® II GlovesThe most comfortable, cut-resistant and cost effective gloves of their kind on the marketSoft jersey lining provides superior comfort and flexibilityPremium-grade natural rubber crinkle finish coating offers long service lifeUse for handling sharp-edged materials like glass, scrap and sheet metal or abrasive building materials
Part Number Description Size PriceANE16-340-10 Golden Grab-It® II, Knitwrist Men’s 5.43 ANE16-347-10 Golden Grab-It® II, Safety Cuff Men’s 5.44 ANE16-312-10 Golden Grab-It® II, Gauntlet Cuff Men’s 8.05
B. Best® Cutlass® GlovesAn economical replacement for light-to-medium-duty leather palm work glovesPremium natural rubber coating tightly fused to a cotton jersey liner promotes greater wear and valueFeature a nitrile overdip for extra resistance to oil, grease and other chemicalsInduced self-wrinkle finish for strong wet or dry gripSanitized® to help negate the effects of perspiration
Part Number Description Size PriceB133910-10 Cutlass® Men’s 4.43
D. Radnor® Economy Rubber Coated GlovesCotton canvas shell with shirred elastic back and 2” cuffYellow natural rubber coating with crinkle finish offers enhanced grip and abrasion resistance
Part Number Description Size PriceRAD64057920 Rubber Coated, Safety Cuff Large 2.12
A B
C D
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
173
General Purpose Coated Gloves
B
C
We can help you find what you’re looking for.
Call us today!
A
D
A. Radnor® Vinyl Impregnated GlovesProvide excellent flexibility and dexterityFor auto and battery manufacturing, can manufacturing, light fabrication, material handling, metal working, parts assembly and sheet metal handling applicationsStretch fabric enhances comfort and makes gloves easy to slip onGloves are Sanitized®
Part Number Description Size PriceRAD64056322 Vinyl Impregnated Men’s Medium 1.18 RAD64056323 Vinyl Impregnated Men’s Large 1.18 RAD64056324 Vinyl Impregnated Men’s XLarge 1.18RAD64056319 Vinyl Impregnated Ladies’ Small 1.12 RAD64056320 Vinyl Impregnated Ladies’ Medium 1.12 RAD64056321 Vinyl Impregnated Ladies’ Large 1.12
B. Ansell KSR® GlovesVery light, flexible and easy to wearFeature a coating that provides superior grip and liquid repellency, while providing ventilationOutwear 8 oz. cotton gloves by at least 6 to 1, and interlock knit lining stretches to a snug, sensitive fitMachine washable, and they won’t shrink, stiffen or lose their grip
Part Number Description Size PriceANE22-515-7 KSR® Ladies’ Medium 3.17 ANE22-515-7.5 KSR® Ladies’ Large 3.17 ANE22-515-8 KSR® Men’s Medium 3.17 ANE22-515-9 KSR® Men’s Large 3.17 ANE22-515-10 KSR® Men’s XLarge 3.17
C. Best® Fuzzy Duck® GlovesFeature an exclusive, breathable, PVC coating on a soft, comfortable, jersey liner that is cool and abrasion resistantOutwear and replace cotton, light-to-mediumweight leather and goatskin gloves in a wide variety of applicationsAlthough not a true anti-vibration (AV) glove, Fuzzy Duck® tends to absorb and minimize shockLaunderable and Sanitized® to negate the effects of perspiration
Part Number Description Size PriceB13962S-08 Fuzzy Duck® Small 3.32 B13962M-09 Fuzzy Duck® Medium 3.32 B13962L-10 Fuzzy Duck® Large 3.32 B13962XL-11 Fuzzy Duck® XLarge 3.32
D. Best® KPG® GlovesFeature an exclusive, breathable, PVC coating on a comfortable, continuous-knit, 100% cotton liner that is abrasion-resistant, cool, flexible and durableOutwear and replace cotton, lightweight leather, plastic-dot and similar, competi-tive glovesSeam-free liner enhances comfort and eliminates the potential for seam failureTexturized coating assures a strong grip, and while not liquid proof, minimizes absorption of water, oil and grease
Part Number Description Size PriceB13960S-08 KPG® Small 3.13 B13960M-09 KPG® Medium 3.13 B13960L-10 KPG® Large 3.13B13961S-08 KPG®, Knitwrist Small 3.30 B13961M-09 KPG®, Knitwrist Medium 3.30 B13961L-10 KPG®, Knitwrist Large 3.30
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
174
Hand Protection InformationINFORMATION FOR YOUR SAFETY
Cut Resistance DefinedCut resistant gloves provide protection against sharp objects such as glass and sharp metals. Cut resistance is a function of a glove material composition andweight (ounces per sq. yard). Cut protection can be influenced by the factors noted below. The more of these factors that can be engineered into a yarn, the more cutresistant it will be.
Strength: Examples include high performance yarns such as DuPont™ Kevlar®, Dyneema®, Spectra®, etc.Hardness (dulling): An example of hard yarn would be stainless steel, which is often a primary component in engineered yarnsLubricity (slickness): Yarns such as Dyneema® and Spectra® allow a blade to slide over the surface without cutting throughRoll: Most knit gloves allow the individual yarns to roll as a sharp edge slides over them
Remember—There is no such thing as a cut-proof glove.
Cut Resistance Material Strength
Latex
Leather
Cotton
Synthetics (Polyester Nylon)
High Performance MaterialsDyneema®, Dupont™ Kevlar®
Engineered YarnsDupont™ Kevlar®, Steel, Dyneema®, Fiberglass
Metal Mesh
Some common high strength yarns used in the construction of cut resistant gloves include:
DuPont™ Kevlar®—Extraordinarily strong and light, and with inherent properties to resist heat, flame and cuts. DuPont™ Kevlar® fiber is five times stronger than steel on an equal-weight basis and can provide more than 2.5 times the cut resistance of cotton and leather.
Dyneema®—A high performance polyethylene (HPPE) fiber manufactured by means of a gel-spinning process, which combines extreme strength with incredible softness and flexibility while maintaining maximum cut resistance. The smoothness and high crystalline properties of the fiber provide extremely high abrasion resistance. Dyneema® fiber is an excellent conductor of heat and adapts to the temperature of the skin while rapidly transporting the heat and moisture from the inside of the glove to the outside of the glove.
Dyneema® is 15 times stronger than steel, and 40% stronger than aramids on a weight-for-weight basis.
Spectra®—A polyethylene fiber that is 10 times tougher than steel per unit weight and is extremely cut-resistant. Low linting, it easily absorbs liquids making it ideal for use in food processing.
Cut resistant gloves come in various fabrics offering different levels of protection. As is the case with general purpose gloves, a variety of coated gloves are available that can enhance other characteristics such as abrasion, puncture, tear, and grip. It is important to consider the requirements of a particular application when choosing a glove material including comfort and fit. Gloves that provide cut resistance and cut protection do not completely prevent or eliminate the potential for cuts and punctures, and are not intended or tested to provide protection from powered blades, serrated or other sharp or rotating objects.
CE StandardsMechanical Hazard EN388
AbrasionBlade CutTear
The EN388 Standard describes the Couptest method for cut resistance, where a circular blade is moving back and forth across the sample under a fixed load of 5N/500gr, while rotating in the opposite direction of the linear movement. This method simulates the number of repetitive cuts needed to cut through the fabric on the same position in the glove using a constant load. The result of this test, referred to as the cut index, tells you how much better the sample is compared to a reference cotton fabric. For example, a cut index of 4 means the sample has four-times better cut resistance than the reference cotton, thus indicating a performance level of 2 based on the chart below.
0 < 1.2 1 1.2 – 2.4 2 2.5 – 4.9 3 5.0 – 9.9 4 10.0 – 19.9 5 > 20
Performance Level
Average Cut Index(10 measurements)
ASTM F1790 the Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing measures the amount of force (in grams) applied for failure to occur at one inch (25 mm) of travel for a standard cutting blade. The higher the value, the better the cut performance. The performance rating is classified by ANSI/ISEA 105-2005 from a 0 – 5 level based on the outcome of the Cut Performance Protection Test (CPPT). For example, a CPPT with 1,200 gm of force would indicate a performance level of 3 based on the chart below.
ANSI/ISEA 105-2005 Mechanical Ratings:
0 < 199 1 200 – 499 2 500 – 999 3 1000 – 1499 4 1500 – 3499 5 > 3500
Performance Level
Weight (in grams) needed to cut through with 1 inch (25mm) of blade travel
Look for this icon to identify and compare ANSI cut levels for the various gloves featured in this section.
Cut Resistance and TestingGlobally, there are two different performance standards for cut resistance: the European Standard EN388 and the ANSI/ISEA 105 Standard for the US. It is important to understand the difference in the two standards as the testing methods are not identical. Cut levels results of EN388 and ANSI/ISEA standards cannot be correlated. When referring to a cut level, know which standard is being referenced in order to set the right expectations for performance and specifications
x x x x
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
Head and Face P
rotectionH
earingP
rotectitiononR
espiratoryP
rotectionnIInstrum
enCCCCCC
oC
oC
oC
onfined
For cut resistant sleeves see pages 265 – 266
A
E
D
B
C
175
Cut-Resistant Gloves
A. GoldKnit® 100% DuPont™ Kevlar® String Knit Gloves100% DuPont™ Kevlar® string knit gloves are available in three weightsDesigned to protect hands from sharp edges of metals, ceramics, glass and other materialsOffer cut and abrasion resistanceGloves are ambidextrous to help reduce replacement costs
Part Number Description Size PriceANE70-200-7 GoldKnit® Lightweight 100% DuPont™ Kevlar® 7 3.96 ANE70-200-8 GoldKnit® Lightweight 100% DuPont™ Kevlar® 8 3.96 ANE70-200-9 GoldKnit® Lightweight 100% DuPont™ Kevlar® 9 3.96 ANE70-200-10 GoldKnit® Lightweight 100% DuPont™ Kevlar® 10 3.96ANE70-215-7 GoldKnit® Mediumweight 100% DuPont™ Kevlar® 7 5.36 ANE70-215-8 GoldKnit® Mediumweight 100% DuPont™ Kevlar® 8 5.36 ANE70-215-9 GoldKnit® Mediumweight 100% DuPont™ Kevlar® 9 5.36 ANE70-215-10 GoldKnit® Mediumweight 100% DuPont™ Kevlar® 10 5.36ANE70-225-7 GoldKnit® Heavyweight 100% DuPont™ Kevlar® 7 9.17 ANE70-225-8 GoldKnit® Heavyweight 100% DuPont™ Kevlar® 8 9.17 ANE70-225-9 GoldKnit® Heavyweight 100%DuPont™ Kevlar® 9 9.17 ANE70-225-10 GoldKnit® Heavyweight 100% DuPont™ Kevlar® 10 9.17
B. GoldKnit® Dotted 100% DuPont™ Kevlar® String Knit GlovesMediumweight 100% DuPont™ Kevlar® yarn for cut resistancePVC dots on both sides to improve gripFingerless style available for high level of manual dexterityAmbidextrous
Part Number Description Size PriceANE70-330-7 GoldKnit® Mediumweight Dotted 7 7.08 ANE70-330-8 GoldKnit® Mediumweight Dotted 8 7.08 ANE70-330-9 GoldKnit® Mediumweight Dotted 9 7.08 ANE70-330-10 GoldKnit® Mediumweight Dotted 10 7.08
C. Vantage® 70-356 GlovesFeature DuPont™ Kevlar® textured yarn reinforced by glassAir jet texturing process results in a more breathable, cooler and more comfortable gloveEnhanced heavy-duty cut protectionPatented Automatic Reinforced Thumb (ART), which runs the length of the thumb, provides added wear in this high stress areaErgonomic design allows for a more natural fit to the hand thereby improving comfort and worker complianceProvide intermittent thermal heat protection
Part Number Description Size PriceANE70-356-7 Vantage® 70-356 Ladies’ 5.75 ANE70-356-9 Vantage® 70-356 Men’s 5.96
D. Vantage® String Knit Gloves10 Gauge, mediumweight string knit made with exclusively engineered yarns Contain DuPont™ Kevlar® fiber and is plaited with poly/cotton yarn for comfortReinforced thumb crotchProvide ANSI Level 4 cut protection, CPPT 2554g, and can be used even where limited heat and molten splashes are encounteredIdeal for handling small and medium metal pieces with sharp edges
Part Number Description Size PriceANE70-761-7 Vantage® String Knit 7 11.26 ANE70-761-8 Vantage® String Knit 8 11.26 ANE70-761-9 Vantage® String Knit 9 11.26 ANE70-761-10 Vantage® String Knit 10 11.26
E. Vantage® String Knit with Leather Palm Gloves10 Gauge, mediumweight string knit made of engineered yarnsPalm is reinforced with premium leather for a superior and sure gripContain DuPont™ Kevlar® fiber and is plaited with poly/cotton yarn for comfortProvide ANSI Level 4 cut protection, CPPT 2495g, safeguards against sharp snags
Part Number Description Size PriceANE70-765-8 Vantage® String with Leather Palm 8 18.23 ANE70-765-9 Vantage® String with Leather Palm 9 18.23 ANE70-765-10 Vantage® String with Leather Palm 10 18.23 ANE70-765-11 Vantage® String with Leather Palm 11 18.23
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
D
B
C
E
F
A
176
Cut-Resistant Gloves
A. Honeywell Bull Dog™ Gloves7 Cut standardweight, 100% DuPont™ Kevlar® linerLeather palm, full leather thumb and reinforced thumb crotchComplete protection with leather wrapped between fingersCut and abrasion protection in an economically priced style
Part Number Description Size PricePERKV18-45 Bull Dog™ Men’s 15.37
B. Honeywell Junk Yard Dog® Gloves7 Cut standardweight 100% DuPont™ Kevlar® linerFull premium leather palm and reinforced thumb crotchCut, slash, puncture and heat resistant
Part Number Description Size PricePERKV18A-100-50 Junk Yard Dog® Men’s 17.39 PERKV18AL10050 Junk Yard Dog® Ladies 17.10 PERKV18AJ10050 Junk Yard Dog® Jumbo 18.00
C. Honeywell Guard Dog® GlovesPremium grade leather over 100% DuPont™ Kevlar® seamless knit liner Double-lock DuPont™ Kevlar® reinforced stitchingHeavy-duty protection with added durability and improved grip in oily applicationsSafety cuff for easy on-off and increased wrist protection
Part Number Description Size PricePERKV224D Guard Dog® Men’s 17.91 PERKV224DJ Guard Dog® Jumbo 18.53
D. Memphis DuPont™ Kevlar® Plaited GlovesDuPont™ Kevlar® Brand fiber outside with cotton insideCut resistant7 Gauge regular weightComply with FDA regulations for direct food contact
Part Number Description Size PriceMEG9362S DuPont™ Kevlar® Plaited Small 3.41 MEG9362L DuPont™ Kevlar® Plaited Large 3.41
E. Memphis Regular Weight 7 Gauge 100% DuPont™ Kevlar® GlovesRegular weight 7 Gauge 100% DuPont™ Kevlar® brand fiber for high tensile strength relative to its weight—up to five times stronger than steelWill not melt, ignite or conduct electricityHigh comfort levelProvide manual dexterity Gloves can be used as linersLaunderable
Part Number Description Size PriceMEG9370S Regular Weight 7 Gauge 100% DuPont™ Kevlar® Small 5.89 MEG9370M Regular Weight 7 Gauge 100% DuPont™ Kevlar® Medium 5.89 MEG9370L Regular Weight 7 Gauge 100% DuPont™ Kevlar® Large 5.89 MEG9370XL Regulart Weight 7 Gauge 100% DuPont™ Kevlar® XLarge 6.43
F. Memphis GRIP SHARP™ Gloves7 Gauge DuPont™ Kevlar® knit shell with select split shoulder leather palmReinforced thumb crotchCut resistant
Part Number Description Size PriceMEG9686S GRIP SHARP™ Small 15.62 MEG9686M GRIP SHARP™ Medium 15.62 MEG9686L GRIP SHARP™ Large 15.62 MEG9686XL GRIP SHARP™ XLarge 16.14
Cotton Inside
Kevlar® Outside
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
177
Cut-Resistant GlovesA
E
D
B
C
A. Whizard® Metalguard® with Cotton Plaiting GlovesContinuous knit heavyweight glove eliminates need for double glovingSuperior cut and abrasion resistanceCotton plaiting offers additional comfort and grease and oil absorptionAdditional reinforcement in the thumb crotch area increases wear lifeANSI Cut Level 4, 7 gaugeAmbidextrous, prewashed, preshrunkSold per pair
Part Number Description Size PriceWLA1882S Metalguard® with Cotton Plaiting Small 12.57 WLA1882M Metalguard® with Cotton Plaiting Medium 12.57 WLA1882L Metalguard® with Cotton Plaiting Large 12.57 WLA1882XL Metalguard® with Cotton Plaiting XLarge 12.57
B. Whizard® Metalguard® Mediumweight GlovesInnovative combination of high performance fibers, stainless steel and polyester Provide a longer wear life compared to a standard spun knit cut resistant gloveCan be worn as a liner or alonePrewashed, preshrunk; ambidextrousSold per pair
Part Number Description Hem Color Size PriceWLA1878S Metalguard® Mediumweight Yellow Small 9.92 WLA1878M Metalguard® Mediumweight Blue Medium 9.92 WLA1878L Metalguard® Mediumweight White Large 9.92 WLA1878XL Metalguard® Mediumweight Orange XLarge 9.92
C. Whizard® Metalguard® Heavyweight GlovesCombination of high performance fibers, stainless steel and polyester blends protects from abrasionsHighest level of cut protection within the Metalguard® lineAdditional reinforcement in the thumb crotch area increases wear lifeAvailable with PVC dots on both sides for greater gripping capabilitiesPrewashed, preshrunk; ambidextrousSold per pair
Part Number Description Hem Color Size PriceWLA1880S Metalguard® Heavyweight Yellow Small 10.38 WLA1880M Metalguard® Heavyweight Blue Medium 10.38 WLA1880L Metalguard® Heavyweight White Large 10.38 WLA1880XL Metalguard® Heavyweight Orange XLarge 10.38WLA1881S Metalguard® with Dots Yellow Small 13.15 WLA1881M Metalguard® with Dots Blue Medium 13.15 WLA1881L Metalguard® with Dots White Large 13.15 WLA1881XL Metalguard® with Dots Orange XLarge 13.15
D. Whizard® Handguard II® GlovesHeavy-duty patented combination of high performance fibers and stainless steel provide an unmatched combination of cut resistance and comfortFeature a 3” cuff for additional wrist protection and has excellent thermal properties Ideal for use in meat, poultry and seafood processing industriesPreshrunk, prewashed; ambidextrousSold individually
Part Number Description Hem Color Size PriceWLA333019 Handguard II®, White Green XSmall 19.30 WLA333021 Handguard II®, White Yellow Small 19.30 WLA333023 Handguard II®, White Blue Medium 19.30 WLA333025 Handguard II®, White White Large 19.30 WLA333027 Handguard II®, White Orange XLarge 19.30
E. Whizard® Heavy-Duty Slipguard GlovesHandguard ll® glove construction with polyurethane grip patternHeavy-duty cut protection and slip resistanceIdeal for pulp and paper industry as well as for plastic trimmingPreshrunk and prewashedSold individually
Part Number Description Hem Color Size PriceWLA133787 Slipguard, Left Hand Green XSmall 25.85 WLA133791 Slipguard, Left Hand Yellow Small 25.85 WLA133795 Slipguard, Left Hand Blue Medium 25.85 WLA133799 Slipguard, Left Hand White Large 25.85 WLA133803 Slipguard, Left Hand Orange XLarge 25.85WLA133788 Slipguard, Right Hand Green XSmall 25.85 WLA133792 Slipguard, Right Hand Yellow Small 25.85 WLA133796 Slipguard, Right Hand Blue Medium 25.85 WLA133800 Slipguard, Right Hand White Large 25.85 WLA133804 Slipguard, Right Hand Orange XLarge 25.85
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
178
Cut-Resistant Gloves
A. D/FLEX® Gloves10 Gauge seamless cut resistant knit with Dyneema® engineered fiberCoated style has dots on both sidesUncoated style is approved for food handlingAmbidextrous and fully launderable
Sold individ uallyPart Number Description Size PriceB13910-07 D/FLEX® Small 7.83 B13910-08 D/FLEX® Medium 7.83 B13910-09 D/FLEX® Large 7.83 B13910-10 D/FLEX® XLarge 7.83B13910C-07 D/FLEX® with Dots Small 8.30 B13910C-08 D/FLEX® with Dots Medium 8.30 B13910C-09 D/FLEX® with Dots Large 8.30 B13910C-10 D/FLEX® with Dots XLarge 8.30
B. D/FLEX® Plus Gloves7 Gauge seamless HPPE engineered fiber with four strands of stainless steelUncoated gloves are ambidextrous and approved for food handlingCoated gloves are palm coated with dots and are hand specificFully launderable
Sold individuallyPart Number Description Size PriceB13917-07 D/FLEX® Plus Small 15.38 B13917-08 D/FLEX® Plus Medium 15.38 B13917-09 D/FLEX® Plus Large 15.38 B13917-10 D/FLEX® Plus XLarge 15.38B13917C-07RH D/FLEX® Plus with Dots, Right Hand Small 16.32 B13917C-07LH D/FLEX® Plus with Dots, Left Hand Small 16.32 B13917C-08RH D/FLEX® Plus with Dots, Right Hand Medium 16.32 B13917C-08LH D/FLEX® Plus with Dots, Left Hand Medium 16.32 B13917C-09RH D/FLEX® Plus with Dots, Right Hand Large 16.32 B13917C-09LH D/FLEX® Plus with Dots, Left Hand Large 16.32 B13917C-10RH D/FLEX® Plus with Dots, Right Hand XLarge 16.32 B13917C-10LH D/FLEX® Plus with Dots, Left Hand XLarge 16.32
C. T/FLEX® Gloves15 Gauge seamless cut resistant knit with Dyneema® engineered fiberFeatures AlphaSan® antimicrobial treatmentApproved for food handlingUncoated gloves are approved for food handlingAmbidextrous and fully launderable for long wear life
Also available in hi-viz yellow optionSold individually
Part Number Description Size PriceB138115-07 T/FLEX® Small 10.00 B138115-08 T/FLEX® Medium 10.00 B138115-09 T/FLEX® Large 10.00 B138115-10 T/FLEX® XLarge 10.00
D. T/FLEX® Plus Gloves13 Gauge seamless cut resistant knit with Dyneema® engineered fiber plated with Lycra®-Spandex® and Thermax®
Feature AlphaSan® antimicrobial treatmentCoated style has dots on two sidesUncoated style is approved for food handlingAmbidextrous and fully launderable
Sold individuallyPart Number Description Size PriceB138113-07 T/FLEX® Plus Small 12.64 B138113-08 T/FLEX® Plus Medium 12.64 B138113-09 T/FLEX® Plus Large 12.64 B138113-10 T/FLEX® Plus XLarge 12.64B138113C-07 T/FLEX® Plus with Dots Small 15.19 B138113C-08 T/FLEX® Plus with Dots Medium 15.19 B138113C-09 T/FLEX® Plus with Dots Large 15.19 B138113C-10 T/FLEX® Plus with Dots XLarge 15.19
A
B
C
D
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
D
B
C
179
Cut-Resistant Gloves
A. Ansell SafeKnit® Ultralight LinersUltralight, light-duty, one strand linerManufactured from hi-tech fibers, gloves offer cut resistance comparable to stainless steel with superior comfort and flexibilityCan be repeatedly laundered, even in bleach, without compromising protective propertiesSold individually
Part Number Description Size PriceANE72-025-6 SafeKnit® Ultralight Liners XSmall 10.98 ANE72-025-7 SafeKnit® Ultralight Liners Small 10.98 ANE72-025-8 SafeKnit® Ultralight Liners Medium 10.98 ANE72-025-9 SafeKnit® Ultralight Liners Large 10.98 ANE72-025-10 SafeKnit® Ultralight Liners XLarge 10.98
B. Ansell Polar Bear® Supreme Gloves Made of yarns containing three strands of stainless steelMore cost effective than chain mesh designs, yet still offers exceptionally high level of cut protectionA liner is provided for extra comfortAmbidextrousSold individually
Part Number Description Size PriceANE74-301-6 Polar Bear® Supreme XSmall 16.42 ANE74-301-7 Polar Bear® Supreme Small 16.42 ANE74-301-8 Polar Bear® Supreme Medium 16.42 ANE74-301-9 Polar Bear® Supreme Large 16.42 ANE74-301-10 Polar Bear® Supreme XLarge 16.42
C. Ansell PawGard® GlovesMade of Dyneema® and other hi-tech fibersANSI Level 5 cut protectionExclusive TUFF-CUFF™ II technology dramatically reduces cuff blowout, even after multiple launderings in bleachExtended cuff offers extra protection around the wristSold individually
Part Number Description Size PriceANE74-048-S PawGard®, Gray 7 15.57 ANE74-048-M PawGard®, Gray 8 15.57 ANE74-048-L PawGard®, Gray 9 15.57 ANE74-048-XL PawGard®, Gray 10 15.57
D. Wells Lamont Cut-Tec™ GlovesWireless cut protection features a core containment system for increased comfortHighly engineered composite fiber provides durability and increased cut protectionGood cut resistance and flexibilityAmbidextrousWashableSold individually
Part Number Description Size PriceWLAY5858S Cut-Tec™, 13 Gauge Small 4.96 WLAY5858M Cut-Tec™, 13 Gauge Medium 4.96 WLAY5858L Cut-Tec™, 13 Gauge Large 4.96 WLAY5858XL Cut-Tec™, 13 Gauge XLarge 4.96
E. Honeywell Whiting & Davis® Metal Mesh GlovesReversible full hand mesh glove with side slit offers excellent cut and slash protectionDome fastener snap-type closure which is easy to remove and adjustable to all wrist sizesAnti-microbial polypropylene strapSold individually
Part Number Description Size PricePERA515MD Metal Mesh Medium 109.36 PERA515LD Metal Mesh Large 109.36 PERA515XLD Metal Mesh XLarge 109.36
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
180
Coated Cut-Resistant GlovesA
E
D
B
C
F. PowerFlex® 80-813 GlovesThin 13g knitted liner with DuPont™ Kevlar® increases productivity and compliance Glove materials are inherently flame resistant, providing protection even after multiple launderingsErgonomic design, superior comfort, dexterity and flexibility based on patented technology Proprietary soft foam coating ensures a secure grip in wet, oily and dry environments to reduce slippage and tension in the hands Give the worker the ability to handle sharp parts and materials with confidence Meet FR Testing CGSB 155.20-2000 Provide HRC Level 2 Arc Flash Protection, (ATPV) 12 cal/cm2
Part Number Description Size PriceANE80-813-6 PowerFlex® 80-813 6 18.60 ANE80-813-7 PowerFlex® 80-813 7 18.60 ANE80-813-8 PowerFlex® 80-813 8 18.60 ANE80-813-9 PowerFlex® 80-813 9 18.60 ANE80-813-10 PowerFlex® 80-813 10 18.60 ANE80-813-11 PowerFlex® 80-813 11 18.60
F
A. NitraSafe® Foam GlovesPatented porous nitrile coating channels oil away from the surface for better grip while providing superior flexibility and dexterityFive-piece jersey lining incorporates cut-resistant DuPont™ Kevlar® panels in the high-stress areasResist cuts, punctures an d abrasionsIn light oil applications, gloves provide better grip and cut protection than ordinary cut-resistant knit gloves
Part Number Description Size PriceANE28-350-8 NitraSafe® Foam, Palm Coated, Safety Cuff 8 12.58 ANE28-350-9 NitraSafe® Foam, Palm Coated, Safety Cuff 9 12.58 ANE28-350-10 NitraSafe® Foam, Palm Coated, Safety Cuff 10 12.58ANE28-360-8 NitraSafe® Foam, Fully Coated, Safety Cuff 8 13.94 ANE28-360-9 NitraSafe® Foam, Fully Coated, Safety Cuff 9 13.94 ANE28-360-10 NitraSafe® Foam, Fully Coated, Safety Cuff 10 13.94
B. Metalist® Foam GlovesErgonomically designed for a natural, relaxed fit, these gloves feature DuPont™ Kevlar® woven into the high stress areas of the soft cotton linerFlexible, foam nitrile coating provides added cut resistance and a sure grip on dry or oily surfacesA lightweight nitrile safety cuff protects wrist and forearm
Part Number Description Size PriceANE28-507-7 Metalist® Foam 7 8.11 ANE28-507-8 Metalist® Foam 8 8.11 ANE28-507-9 Metalist® Foam 9 8.11 ANE28-507-10 Metalist® Foam 10 8.11
C. PowerFlex® Plus GlovesAdvanced ergonomic design features a soft, seamless DuPont™ Kevlar® knit liner for unbelievable comfortBlue natural rubber latex with a coated, textured palmPowerful combination of abrasion and puncture resistanceSuperior wet and dry grip Caution: Contains natural rubber latex which may cause allergic reactions in some individuals
Part Number Description Size PriceANE80-600-7 PowerFlex® Plus Small 12.13 ANE80-600-8 PowerFlex® Plus Medium 12.13 ANE80-600-9 PowerFlex® Plus Large 12.13 ANE80-600-10 PowerFlex® Plus XLarge 12.13
D. HyFlex® 11-627 GlovesGray DSM Dyneema® and Lycra® liner promotes a cool and comfortable feelingGray polyurethane palm coating provides excellent abrasion protection versus other coatingsExcellent grip and effective control in dry to minimally oily environments
Part Number Description Size PriceANE11-627-6 HyFlex® 11-627 6 10.75 ANE11-627-7 HyFlex® 11-627 7 10.75 ANE11-627-8 HyFlex® 11-627 8 10.75 ANE11-627-9 HyFlex® 11-627 9 10.75 ANE11-627-10 HyFlex® 11-627 10 10.75 ANE11-627-11 HyFlex® 11-627 11 10.75
E. HyFlex® 11-624 GlovesWhite DSM Dyneema® engineered yarn composition with ergonomic design offers unmatched combination of comfort, softness, coolness and cut protectionExceptional precision, dexterity and flexibility when handling small partsBlack polyurethane palm coating gives good resistance to tears and abrasions that might occur when handling sharp parts in dry and light oil applications
Part Number Description Size PriceANE11-624-6 HyFlex® 11-624 6 9.53 ANE11-624-7 HyFlex® 11-624 7 9.53 ANE11-624-8 HyFlex® 11-624 8 9.53 ANE11-624-9 HyFlex® 11-624 9 9.53 ANE11-624-10 HyFlex® 11-624 10 9.53 ANE11-624-11 HyFlex® 11-624 11 9.53
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
181
Coated-Cut Resistant Gloves
A
E
D
B
C
E
A. HyFlex® 11-510 GlovesDuPont™ Kevlar® stretch liner offers cut protection with an ergonomic fitPatented Knitted Variable Stitch Design (KVSD) provides improved fit by releasing tension in high stress zones of the glovePatented zonal nylon and DuPont™ Kevlar® technology increases abrasion resistance on the palm and back of handComfortFlex padded cuff provides a soft feel and sweat absorptionProprietary nitrile foam technology provides longer wear in thumb crotch and palm areaSilicone-free and latex free for worker and product protection
Part Number Description Size PriceANE11-510-6 HyFlex® 11-510 6 7.49 ANE11-510-7 HyFlex® 11-510 7 7.49 ANE11-510-8 HyFlex® 11-510 8 7.49 ANE11-510-9 HyFlex® 11-510 9 7.49 ANE11-510-10 HyFlex® 11-510 10 7.49 ANE11-510-11 HyFlex® 11-510 11 7.49
B. HyFlex® 11-500 GlovesErgonomically designed DuPont™ Kevlar® stretch liner with spandex provides superior fit, reducing risk of snags and cutsBlack foam nitrile palm coating hides soil and enhances grip in light oil conditions with good abrasion resistanceSilicone-free and natural latex-free for worker and product protectionExtended cuff offers extra cut protection around the wrist
Part Number Description Size PriceANE11-500-6 HyFlex® 11-500 6 6.81 ANE11-500-7 HyFlex® 11-500 7 6.81 ANE11-500-8 HyFlex® 11-500 8 6.81 ANE11-500-9 HyFlex® 11-500 9 6.81 ANE11-500-10 HyFlex® 11-500 10 6.81 ANE11-500-11 HyFlex® 11-500 11 6.81
C. HyFlex® 11-511 GlovesExclusive Intercept Technology yarn developed by Ansell and DuPont™
Patented Knitted Variable Stitch Design (KVSD) provides improved fit by releasing tension in high stress zones of the gloveRedesigned finger length for greater comfort, dexterity, wear and flexibilityEnhanced Cuff Overedging (ECO) provides more elasticity in cuff area for donning and doffingProprietary nitrile foam technology provides increased wear in thumb crotch and palm area100% silicone and latex free reduces product contamination and skin sensitivity
Part Number Description Size PriceANE11-511-6 HyFlex® 11-511 6 17.83 ANE11-511-7 HyFlex® 11-511 7 17.83 ANE11-511-8 HyFlex® 11-511 8 17.83 ANE11-511-9 HyFlex® 11-511 9 17.83 ANE11-511-10 HyFlex® 11-511 10 17.83 ANE11-511-11 HyFlex® 11-511 11 17.83
D. HyFlex® 11-501 GlovesIntercept Technology® with DuPont™ Kevlar® Stretch Armor for enhanced cut protection to reduce the risk of injury and related expensesSuperior fit for greater comfort and dexterity increases worker acceptance and complianceBlue foam nitrile coating enhances grip in light oil applications
Part Number Description Size PriceANE11-501-6 HyFlex® 11-501 6 15.94 ANE11-501-7 HyFlex® 11-501 7 15.94 ANE11-501-8 HyFlex® 11-501 8 15.94 ANE11-501-9 HyFlex® 11-501 9 15.94 ANE11-501-10 HyFlex® 11-501 10 15.94 ANE11-501-11 HyFlex® 11-501 11 15.94
E. Cut Protection GlovesExclusive Ansell Intercept Technology® with DuPont™ Kevlar® Stretch Armor yarnBlack foam nitrile coating delivers great wear and gripProvide bare hand dexterity with all-day comfort Best-in-class performance for cut abrasion resistanceExtremely durable for the toughest jobs
Part Number Description Size PriceANE97-505-8 Cut Protection (8) Small 20.83 ANE97-505-9 Cut Protection (9) Medium 20.83 ANE97-505-10 Cut Protection (10) Large 20.83
A
C
PnP
rotectiveeW
oW
oW
oorkrkrkrkrkrkkwe
we
we
we
wwe
wearararaarar
FFirst Aid
PPr
Pr
Pr
Pr
Pr
Pr
Prooododododododuucts
Spill C
ontrol &C
ontainment
ppFac
Sup
DD
B
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
182
Coated Cut-Resistant GlovesA
FE
D
B
C
A. SHOWA® ATLAS® KV300 GlovesFlat dipped blue natural rubber palm coating with a wrinkle grip10 Gauge seamless cut-resistant liner made with DuPont™ Kevlar®
Excellent wet and dry wrinkle gripPart Number Description Size PriceB13KV300S-07 SHOWA® ATLAS® KV300 Small 9.62 B13KV300M-08 SHOWA® ATLAS® KV300 Medium 9.62 B13KV300L-09 SHOWA® ATLAS® KV300 Large 9.62 B13KV300XL-10 SHOWA® ATLAS® KV300 XLarge 9.62
B. SHOWA® ATLAS® KV350 GlovesFlat-dipped green nitrile palm coating with a textured gripKnuckles are not coated to provide more flexibility and cool comfortable wearing10 Gauge seamless cut-resistant liner made with DuPont™ Kevlar®
Abrasion resistant with a textured gripPart Number Description Size PriceB13KV350S-07 SHOWA® ATLAS® KV350 Small 10.17 B13KV350M-08 SHOWA® ATLAS® KV350 Medium 10.17 B13KV350L-09 SHOWA® ATLAS® KV350 Large 10.17 B13KV350XL-10 SHOWA® ATLAS® KV350 XLarge 10.17
C. AEGIS HP54 Gloves10 Gauge seamless knit comprised of High Performance polyethylene (HPPE), nylon and Lycra® Zorb-IT® Sponge Nitrile Technology palm coating for oily gripIdeal combination of comfort, cut-resistance and durabilityUncompromised fit, grip and feel
Part Number Description Size PriceB13230-07 AEGIS HP54 Small 13.11 B13230-08 AEGIS HP54 Medium 13.11 B13230-09 AEGIS HP54 Large 13.11 B13230-10 AEGIS HP54 XLarge 13.11
D. SHOWA® S-TEX 300 GlovesA high performing glove featuring patented Hagane Coil™ Fiber Technology which combines excellent cut-resistance with unmatched comfort and dexteritySafety yellow seamless liner is engineered with a stainless steel core that provides the wearer with extra protection against cuts and lacerations with increased visibilityRough textured natural rubber palm coating allows for great wet/dry grip and enhanced durabilityOpen-back design offers extra comfort and breathability
Part Number Description Size PriceB13STEX300S-07 SHOWA® S-TEX 300 Small 10.59 B13STEX300M-08 SHOWA® S-TEX 300 Medium 10.59 B13STEX300L-09 SHOWA® S-TEX 300 Large 10.59 B13STEX300XL-10 SHOWA® S-TEX 300 XLarge 10.59
E. SHOWA® S-TEX 303 GlovesFeaturing patented Hagane Coil™ Fiber Technology which provides excellent cut-resistance with unmatched dexterityCombination of a stainless steel core and proven cut-resistance, DuPont™ Kevlar® results in the ultimate hand protection from cuts and lacerationsOpen-back design offers comfort and flexibilityNatural rubber palm coating ensures excellent wet/dry grip
Part Number Description Size PriceB13STEX303S-07 SHOWA® S-TEX 303 Small 17.15 B13STEX303M-08 SHOWA® S-TEX 303 Medium 17.15 B13STEX303L-09 SHOWA® S-TEX 303 Large 17.15 B13STEX303XL-10 SHOWA® S-TEX 303 XLarge 17.15
F. SHOWA® S-TEX 350 GlovesHigh performing glove featuring patented Hagane Coil™ Fiber Technology which combines excellent cut-resistance with unmatched comfort and dexteritySafety yellow seamless liner is engineered with a stainless steel core providing the wearer with extra protection against sharp edges with increased visibilityNitrile palm coating enhances abrasion and puncture resistance as well as ensuring outstanding durabilityOpen-back design offers extra comfort and breathability
Part Number Description Size PriceB13STEX350S-07 SHOWA® S-TEX 350 Small 11.19 B13STEX350M-08 SHOWA® S-TEX 350 Medium 11.19 B13STEX350L-09 SHOWA® S-TEX 350 Large 11.19 B13STEX350XL-10 SHOWA® S-TEX 350 XLarge 11.19
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
B
C
D
183
Coated Cut-Resistant Gloves
A. Nitri-Flex® Ultimate GlovesBreathable seamless stretch DuPont™ Kevlar®-Lycra® cut-resistant liner is ergonomically designed for maximum comfortFlat-dipped, green nitrile coating features a textured grip for superior handling and tactile sensitivityAbrasion and cut-resistant
Part Number Description Size PriceB135900-07 Nitri-Flex® Ultimate Small 7.21 B135900-08 Nitri-Flex® Ultimate Medium 7.21 B135900-09 Nitri-Flex® Ultimate Large 7.21 B135900-10 Nitri-Flex® Ultimate XLarge 7.21
B. Zorb-IT® Ultimate GlovesCut-resistant DuPont™ Kevlar® fibers are spun with super-stretchable, super-breathable Lycra® Flat-dipped gray sponge-nitrile coatingUltimate grip in wet, oily and dry applicationsExcellent cut and abrasion resistance
Part Number Description Size PriceB134560-07 Zorb-IT® Ultimate Small 6.85 B134560-08 Zorb-IT® Ultimate Medium 6.85 B134560-09 Zorb-IT® Ultimate Large 6.85 B134560-10 Zorb-IT® Ultimate XLarge 6.85 B134560-11 Zorb-IT® Ultimate 2XLarge 7.74
C. Zorb-IT® Ultra GlovesBreathable DuPont™ Kevlar®/Lycra® stretch liner provides cut resistanceErgo-design for maximum comfortGray sponge nitrile coating featuring Maximum Oil Absorbency (MXOA)3⁄4” Dipped for additional protection for the back of the hand4” Extended cuff for extra protection
Part Number Description Size PriceB134565-07 Zorb-IT® Ultra Small 7.70 B134565-08 Zorb-IT® Ultra Medium 7.70 B134565-09 Zorb-IT® Ultra Large 7.70 B134565-10 Zorb-IT® Ultra XLarge 7.70 B134565-11 Zorb-IT® Ultra 2XLarge 7.70
D. AEGIS KVS4™ GlovesCombines a Cut Level 4 cut-resistant liner with a durable, Zorb-IT® Sponge Nitrile Technology palm coatingBlend of 13 gauge Dupont™ Kevlar® steel and high-performance knit polyester, provides comfortable cut resistanceSeamless knit and open back for added comfortExcellent protection in applications where oil and sharp edges are prevalentProvide durable resistance to abrasions, snags and punctures
Part Number Description Size PriceB13250-07 AEGIS KVS4™ Small 15.09 B13250-08 AEGIS KVS4™ Medium 15.09 B13250-09 AEGIS KVS4™ Large 15.09 B13250-10 AEGIS KVS4™ XLarge 15.09 B13250-11 AEGIS KVS4™ 2XLarge 15.09
E. SHOWA® 545 GlovesNitrile palm coating13 Gauge seamless cut-resistant HPPE linerGray with blue coatingCombination of exceptional grip, dexterity and cut resistance with the durability and oil resistance of a nitrile coatingAbrasion resistant
Part Number Description Size PriceB13545-S SHOWA® 545 Small 17.36 B13545-M SHOWA® 545 Medium 17.36 B13545-L SHOWA® 545 Large 17.36 B13545-XL SHOWA® 545 XLarge 17.36
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
Pro
tec
Pro
tect
ion
Pro
tect
ion
ace
184
Coated Cut-Resistant Gloves
B
E
D
C
A. Radnor® Latex Coated DuPont™ Kevlar® String GlovesSeamless 10 gauge 100% DuPont™ Kevlar® string knit shellBlue latex palm and fully coated thumb with crinkle finish for superior grip in wet and dry applicationsProvide exceptional abrasion and puncture resistance
Part Number Description Size PriceRAD64056901 Latex Coated DuPont™ Kevlar® String Small 8.53 RAD64056902 Latex Coated DuPont™ Kevlar® String Medium 8.53 RAD64056903 Latex Coated DuPont™ Kevlar® String Large 8.53 RAD64056904 Latex Coated DuPont™ Kevlar® String XLarge 8.53
B. Radnor® Nitrile Palm Coated DuPont™ Kevlar®/Lycra® GlovesSeamless 13 gauge Kevlar®/Lycra® knit shellBlack nitrile palm coating resists abrasion and tears and repels oil for an improved grip
Part Number Description Size PriceRAD64056911 Nitrile Palm Coated DuPont™ Kevlar®/Lycra® Small 6.22 RAD64056912 Nitrile Palm Coated DuPont™ Kevlar®/Lycra® Medium 6.22 RAD64056913 Nitrile Palm Coated DuPont™ Kevlar®/Lycra® Large 6.22 RAD64056914 Nitrile Palm Coated DuPont™ Kevlar®/Lycra® XLarge 6.22
C. Radnor® Polyurethane Palm Coated HPPE GlovesSeamless 13 gauge high-density HPPE fiber shell provides cool comfort and good cut resistanceHigh-density polyethylene fiber is 10 times stronger than steel on an equal weight basis and 40% stronger than Aramid fibersPU palm coating offers outstanding tactility and dexterity with superior resistance to abrasion and tear
Part Number Description Size PriceRAD64056921 White PU Palm Coated, White HPPE Shell Small 9.86 RAD64056922 White PU Palm Coated, White HPPE Shell Medium 9.86 RAD64056923 White PU Palm Coated, White HPPE Shell Large 9.86 RAD64056924 White PU Palm Coated, White HPPE Shell XLarge 9.86RAD64056926 Gray PU Palm Coated, S&P HPPE Shell Small 9.86 RAD64056927 Gray PU Palm Coated, S&P HPPE Shell Medium 9.86 RAD64056928 Gray PU Palm Coated, S&P HPPE Shell Large 9.86 RAD64056929 Gray PU Palm Coated, S&P HPPE Shell XLarge 9.86
A
D. SHOWA® 540 and 541 HPPE High Performance Gloves13 Gauge engineered cut-resistant fiber with polyurethane coating offers increased cut protection and is lint freePolyurethane palm coating breathes and provides exceptional gripIdeal where high dexterity, tactility and cut-resistance are required
Part Number Description Size PriceB13540-S SHOWA® 540 High, White Small 10.76 B13540-M SHOWA® 540 High, White Medium 10.76 B13540-L SHOWA® 540 High, White Large 10.76 B13540-XL SHOWA® 540 High, White XLarge 10.76 B13540-XXL SHOWA® 540 High, White 2XLarge 10.76B13541-S SHOWA® 541 High, Black Small 11.62 B13541-M SHOWA® 541 High, Black Medium 11.62 B13541-L SHOWA® 541 High, Black Large 11.62 B13541-XL SHOWA® 541 High, Black XLarge 11.62 B13541-XXL SHOWA® 541 High, Black 2XLarge 11.62
E. Honeywell Pure Fit™ Flex-Cut™ Gloves13 Gauge lightweight gray HPPE fiber blended with a strand of stainless steel increases the strength and cut resistanceLycra plated inner layer provides an extremely comfortable, snug fit Durable gray nitrile coating in palm and fingertips provides excellent cut, snag and abrasion resistance while offering superior grip Provide uncompromised cut and abrasion protection without sacrificing dexterity, tactile sensitivity or comfort
Part Number Description Size PricePERPF570-S Pure Fit™ Flex-Cut™ Small 27.49 PERPF570-M Pure Fit™ Flex-Cut™ Medium 27.49 PERPF570-L Pure Fit™ Flex-Cut™ Large 27.49 PERPF570-XL Pure Fit™ Flex-Cut™ XLarge 27.49
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
nC
oC
onfineneeed d dddSSSp
Space
185
Coated Cut-Resistant Gloves
A
F
E
D
B
C
F. Ultra Tech® Nitrile KV Gloves13 Gauge stretch Kevlar® seamless shellBlack, light foam nitrile coated palm and fingertipsCoating is softer and more flexibleProvide great cut protectionMachine washable
Part Number Description Size PriceMEG9693S Ultra Tech® Nitrile KV Small 8.00 MEG9693M Ultra Tech® Nitrile KV Medium 8.00 MEG9693L Ultra Tech® Nitrile KV Large 8.00 MEG9693XL Ultra Tech® Nitrile KV XLarge 8.00 MEG9693XXL Ultra Tech® Nitrile KV 2XLarge 8.00
A. Ninja® Force Gloves13 Gauge gray, Dyneema®/synthetic fiber/fiberglass seamless shellGray polyurethane coated palm and fingertipsOffer great cut protection Gray coating conceals dirt and provides excellent dexterityTreated with Actifresh® to kill bacteria and promote freshnessMachine washable
Part Number Description Size PriceMEGN9677S Ninja® Force Small 15.93 MEGN9677M Ninja® Force Medium 15.93 MEGN9677L Ninja® Force Large 15.93 MEGN9677XL Ninja® Force XLarge 15.93
B. Ninja® Max Gloves10 Gauge gray Dyneema®/synthetic fiber yarn seamless shellBlack bi-polymer polyurethane/nitrile coated palm and fingertipsGreat abrasion and cut protectionTreated with Actifresh® to kill bacteria and promote freshnessMachine washable
Part Number Description Size PriceMEGN9676GS Ninja® Max Small 23.36 MEGN9676GM Ninja® Max Medium 23.36 MEGN9676GL Ninja® Max Large 23.36 MEGN9676GXL Ninja® Max XLarge 23.36
C. Ultra Tech® Cut and Splash Gloves10 Gauge gray synthetic fiber/fiberglass knit shellFully coated red nitrile NFT dipComponent materials comply with all FDA regulations for food contactAbrasion and cut resistantMachine washable
Part Number Description Size PriceMEG9683CSS Ultra Tech® Cut and Splash Small 9.73 MEG9683CSM Ultra Tech® Cut and Splash Medium 9.73 MEG9683CSL Ultra Tech® Cut and Splash Large 9.73 MEG9683CSXL Ultra Tech® Cut and Splash XLarge 9.73
D. Ultra Tech® Dyneema® PU Gloves13 Gauge Dyneema® blended seamless shellPolyurethane coated palm and fingertipsDyneema® fibers help dissipate body heat and pass moisture from the inside of the glove to the outsideMachine washable
Part Number Description Size PriceMEG9676XS Ultra Tech® Dyneema® PU—S and P Gray XSmall 13.51 MEG9676S Ultra Tech® Dyneema® PU—S and P Gray Small 13.51 MEG9676M Ultra Tech® Dyneema® PU—S and P Gray Medium 13.51 MEG9676L Ultra Tech® Dyneema® PU—S and P Gray Large 13.51 MEG9676XL Ultra Tech® Dyneema® PU—S and P Gray XLarge 13.51 MEG9676XXL Ultra Tech® Dyneema® PU—S and P Gray 2XLarge 13.51MEG9677XS Ultra Tech® Dyneema® PU—White XSmall 13.16 MEG9677S Ultra Tech® Dyneema® PU—White Small 13.16 MEG9677M Ultra Tech® Dyneema® PU—White Medium 13.16 MEG9677L Ultra Tech® Dyneema® PU—White Large 13.16 MEG9677XL Ultra Tech® Dyneema® PU—White XLarge 13.16
E. KS-5™ Kevlar® Steel Gloves13 Gauge Kevlar®/stainless steel/nylon blended seamless shellTextured black latex coated palm and fingertips provides an enhanced grip and puncture protectionOffer great cut protection KS-5™ affords higher levels of cut protection and enhanced grip in a lightweight, high dexterity shellMachine washable
Part Number Description Size PriceMEG9389S K5-5™ Kevlar® Steel Small 16.99 MEG9389M K5-5™ Kevlar® Steel Medium 16.99 MEG9389L K5-5™ Kevlar® Steel Large 16.99 MEG9389XL K5-5™ Kevlar® Steel XLarge 16.99
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
186
Coated Cut-Resistant Gloves
A
D
B
C
A. GREAT WHITE® GlovesWhite spun Dyneema®/Lycra® seamless shellLightweight gray polyurethane coated palm and fingers for superior puncture and abrasion resistanceWashable, resistant to chemicals, water and ultraviolet lightSilicone-free
Part Number Description Size PricePIP19-D622/S GREAT WHITE® Small 9.77 PIP19-D622/M GREAT WHITE® Medium 9.77 PIP19-D622/L GREAT WHITE® Large 9.77 PIP19-D622/XL GREAT WHITE® XLarge 9.77 PIP19-D622/XXL GREAT WHITE® 2XLarge 9.77
B. G-Tek® CR Ultra Gloves13 Gauge, salt and pepper filament Dyneema®/nylon seamless shellMediumweight black foam nitrile coated palm and finger tipsWashable, resistant to water and ultraviolet lightSilicone-freeUse for electronics, glass cutting, metal handling, food processing and meat processing
Part Number Description Size PricePIP19-D434/S G-Tek® CR Ultra Small 12.47 PIP19-D434/M G-Tek® CR Ultra Medium 12.47 PIP19-D434/L G-Tek® CR Ultra Large 12.47 PIP19-D434/XL G-Tek® CR Ultra XLarge 12.47
C. MaxiCut® 3 by ATG® GlovesSeamless gray knit shell constructed fo nylon with engineered yarns of glass/polyester/Lycra®
Gray heavyweight MicroFoam nitrile coated palm and fingertips provides good grip in oily and wet conditionsReinforced thumb crotchContain no stainless steel fibersWashable, resistant to chemicals, water and ultraviolet light
Part Number Description Size PricePIP18-570/S MaxiCut® 3 by ATG® Small 9.22 PIP18-570/M MaxiCut® 3 by ATG® Medium 9.22 PIP18-570/L MaxiCut® 3 by ATG® Large 9.22 PIP18-570/XL MaxiCut® 3 by ATG® XLarge 9.22
D. MaxiCut® 5 by ATG® GlovesSeamless gray knit shell constructed of nylon with engineered yarns of glass/polyester/Lycra®
Gray heavyweight MicroFoam nitrile coated palm and fingertips provides good grip in oily and wet conditionsReinforced thumb crotchContain no stainless steel fibersWashable, resistant to chemicals, water and ultraviolet light
Part Number Description Size PricePIP19-D470/S MaxiCut® 5 by ATG® Palm Coated Small 23.97 PIP19-D470/M MaxiCut® 5 by ATG® Palm Coated Medium 23.97 PIP19-D470/L MaxiCut® 5 by ATG® Palm Coated Large 23.97 PIP19-D470/XL MaxiCut® 5 by ATG® Palm Coated XLarge 23.97 PIP19-D470/XXL MaxiCut® 5 by ATG® Palm Coated 2XLarge 23.97PIP19-D475/S MaxiCut® 5 by ATG® 3⁄4 Coated Small 24.75 PIP19-D475/M MaxiCut® 5 by ATG® 3⁄4 Coated Medium 24.75 PIP19-D475/L MaxiCut® 5 by ATG® 3⁄4 Coated Large 24.75 PIP19-D475/XL MaxiCut® 5 by ATG® 3⁄4 Coated XLarge 24.75 PIP19-D475/XXL MaxiCut® 5 by ATG® 3⁄4 Coated 2XLarge 24.75
C
PIP19-D470/XLPIP19-D470/XXPIP19-D475/SPIP19-D475/MPIP19-D475/LPIP19-D475/XLPIP19-D475/XX
A
B
PIP1
B.13MWSUa
Part PIP1PIP1PIP1PIP1
C.SgGgRC
p Con
tain
men
tpp
yS
uppl
ies
Sto
rrragagagagagggag
eeeee
D
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
D
B
C
TM
TM
187
Coated Cut-Resistant Gloves
A. 9000 Series™ 9011 Gloves
® brand material for the highest cut-resistance available on the market—exceeds ISEA/CE Level 5 (in noted enhanced areas)
on enhanced areas from wires, metal, wood and glass
with wrinkle rubber palm coating for exceptional dexterity and feel
Part Number Description Size PricePF39011-S 9000 Series™ 9011 Small (7) 13.71 PF39011-M 9000 Series™ 9011 Medium (8) 13.71 PF39011-L 9000 Series™ 9011 Large (9) 13.71 PF39011-XL 9000 Series™ 9011 XLarge (10) 13.71 PF39011-XXL 9000 Series™ 9011 2XLarge (11) 13.71
B. 9000 Series™ 9010 Gloves
® brand material for the highest cut-resistance available on the market—exceeds ISEA/CE Level 5 (in noted enhanced areas)
protection on enhanced areas from wires, metal, wood and glass
great oily or dry grip—ISEA Level 4
Part Number Description Size PricePF39010-7 9000 Series™ 9010 Small (7) 29.19 PF39010-8 9000 Series™ 9010 Medium (8) 29.19 PF39010-9 9000 Series™ 9010 Large (9) 29.19 PF39010-10 9000 Series™ 9010 XLarge (10) 29.19 PF39010-11 9000 Series™ 9010 2XLarge (11) 35.02
C. Mechanics+ 4018 GlovesMade with SuperFabric® brand material for the highest cut-resistance available on the market—Exceeds ISEA/CE Level 5 (in noted enhanced areas)Innovative industrial puncture protection on enhanced areas from wires, metal, wood and glass Synthetic leather palm enhances grip in dry and light oil applications, while providing dexterity to utilize tools and equipmentLaunderable
Part Number Description Size PricePF34018-S Mechanics+ 4018 Small 39.74 PF34018-M Mechanics+ 4018 Medium 39.74 PF34018-L Mechanics+ 4018 Large 39.74 PF34018-XL Mechanics+ 4018 XLarge 39.74 PF34018-XXL Mechanics+ 4018 2XLarge 41.13
D. Chrome Series™ Cut 5 Impact 360° 4025 GlovesMade with SuperFabric® brand material for the highest cut-resistance available on the market—Exceeds ISEA/CE Level 5 (in noted enhanced areas)Back of hand impact protectionOil-resistant synthetic leather palm enhances grip in dry and light oil applications, while providing dexterity to utilize tools and equipment360° Level 5 cut-resistanceLaunderable
Part Number Description Size PricePF34025-S Chrome Series™ Cut 5 Impact 360° 4025 Small (7) 56.51 PF34025-M Chrome Series™ Cut 5 Impact 360° 4025 Medium (8) 56.51 PF34025-L Chrome Series™ Cut 5 Impact 360° 4025 Large (9) 56.51 PF34025-XL Chrome Series™ Cut 5 Impact 360° 4025 XLarge (10) 56.51 PF34025-2X Chrome Series™ Cut 5 Impact 360° 4025 2XLarge (11) 67.81
E. Chrome Series™ Cut 5 Impact Hi-Vis 4026 GlovesMade with SuperFabric® brand material for the highest cut-resistance available on the market—Exceeds ISEA/CE Level 5 (in noted enhanced areas)Back of hand impact protectionOil-resistant synthetic leather palm enhances grip in dry and light oil applications, while providing dexterity to utilize tools and equipmentAbrasion-resistant PVC dots for maximum grip in oily situationsHi-visibility color and reflective tape on back of handLaunderable
Part Number Description Size PricePF34026-7 Chrome Series™ Cut 5 Impact Hi-Vis 4026 Small (7) 42.25 PF34026-8 Chrome Series™ Cut 5 Impact Hi-Vis 4026 Medium (8) 42.25 PF34026-9 Chrome Series™ Cut 5 Impact Hi-Vis 4026 Large (9) 42.25 PF34026-10 Chrome Series™ Cut 5 Impact Hi-Vis 4026 XLarge (10) 42.25 PF34026-11 Chrome Series™ Cut 5 Impact Hi-Vis 4026 2XLarge (11) 50.70
Cut 5 Impact 360° 4025 Gloves
Cut 5 Impact Hi-Vis 4026 Gloves
INFORMATION FOR YOUR SAFETY
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
188
Mechanic’s Anti-Vibration Gloves and Glove Grabbers™ Series
A B
C
B. Valeo® Mechanics Anti-Vibe Gloves
Synthetic leather with mechanics styling and AV GEL™ padding throughout the palm and in the thumbStretch-knit, padded backHeat-resistant synthetic leather palmDouble-layered palm for extra protectionFlexible, EVA padded knuckle protectionElastic cuff with hook and loop closureMachine washable
Part Number Description Size PriceV14V415-M Mechanics Anti-Vibe Medium 21.99 V14V415-L Mechanics Anti-Vibe Large 21.99 V14V415-XL Mechanics Anti-Vibe XLarge 21.99 V14V415-2X Mechanics Anti-Vibe 2XLarge 21.99
ANSI S3.40/ISO 10819 Standard for Anti-Vibration Glove PerformanceVibration in high and mid frequencies, such as those found in power and pneumatic tools, can contribute to Hand-Arm Vibration Syndrome, a painful, debilitating and permanent disorder. The operation of power tools requires an effective vibration-absorbing material.
ANSI S3.40/ISO 10819 is the international standard for anti-vibration glove performance. The standard specifies a method for measuring vibration transmissibility and provides an effective guideline for anti-vibration certification.
3405 Series
3400 Series
A. Valeo® Mechanics Split-Leather Anti-Vibe Gloves
AV GEL™ padding layered over split leather for maximum durability and protection AV GEL™ padded in palmStretch-knit, padded backDouble-layered leather palmFlexible padded knuckle protection Elastic cuff with hook and loop closure
Part Number Description Size PriceV14V420-BLK-M Split-Leather Anti-Vibe, Black Medium 14.99 V14V420-BLK-L Split-Leather Anti-Vibe, Black Large 14.99 V14V420-BLK-XL Split-Leather Anti-Vibe, Black XLarge 14.99 V14V420-BLK-2X Split-Leather Anti-Vibe, Black 2XLarge 14.99
C. Ergodyne® Grabbers™ SeriesLightweight, dielectric/non-conductive materialDetachable, usable with carabiners, D-rings, etc...Breakaway featureDurable, ultra-resilient acetal copolymerSold individually
Part Number Description Color PriceE5719112 #3400 Grabber-Dual Clip Black 2.65 E5719117 #3400 Grabber-Dual Clip Blue 2.65 E5719118 #3400 Grabber-Dual Clip Orange 2.65 E5719119 #3400 Grabber-Dual Clip Lime 2.65Part Number Description Color PriceE5719122 #3405 Grabber-Belt Clip Black 2.65 E5719127 #3405 Grabber-Belt Clip Blue 2.65 E5719128 #3405 Grabber-Belt Clip Orange 2.65 E5719129 #3405 Grabber-Belt Clip Lime 2.65
Mechanics gloves were originally designed with the mechanic in mind and have quickly become popular with contractors and industrial assembly applications. This glove category has evolved to combine superior fit and dexterity needed to handle small parts with protection from scrapes and nicks. A wide range of choices now exist in materials and features to enhance material handling and specific tasks.
Glove construction ranges from a basic synthetic and suede leather palm with a breathable stretch nylon back, to styles incorporating wear patches. Dense padding and vibration dampening gels on the palm side of the hand with neoprene padding and molded rubber on the dorsal side protects from impacts, pinches and blows. Below are some common features found in the construction of mechanics style gloves:
Mechanics Gloves Features and Benefits
EVA Foam PaddingEthylene Vinyl Acetate (EVA) foam padding helps to dampen shock and impact.
Reinforced Wear/Grip PatchesMaterials such as leather, PVC grip patches and DuPont™ Kevlar® are strategically placed in high wear areas such as the palm, fingertips or saddle for added durability and/or enhanced grip.
Molded Thermal Plastic Rubber (TPR)In addition to padding, molded TPR exoskeleton ribs/pads are ergonomically placed to protect knuckles, fingers and the top of the hand from impacts, pinches and blows. The streamline design allows flexion to avoid hand fatigue. This kind of dorsal protection is ideal for heavy construction, gas and oil or mining.
Stretch SpandexFour-way stretch spandex allows for ventilation and shifts with the hand for a full range of movement promoting superior fit and comfort. Consider high visibility colors to keep hands visible and workers safe.
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
189
Anti-Vibration/Impact Gloves
A
F
E
D
B
C
V14V450-WS
V14V430-WSV14V430
V14V435 V14V435-WS
V14V450
V14V440 V14V440-WS
A. V460 Anti-Vibe Glove LinersAV GEL™ in palm, thumb and index fingerLycra® fabric back with sueded leather palmMay be worn alone or as a linerSold per pairOne size fits most
Part Number Description Size PriceV14V460 V460 Anti-Vibe Glove Liner One Size Fits Most 10.99
B. V450 Mesh Fingerless Anti-Vibe GlovesSplit-cow leather palm with cotton mesh backSoft terry lining for comfort and durabilityHook and loop closureMaximum breathability in a fingerless anti-vibe gloveSold per pair—specify size when ordering
Part Number Description Size PriceV14V450 V450 Mesh Fingerless Anti-Vibe Small-XLarge 9.29 V14V450-WS V450 Mesh Fingerless Anti-Vibe with Wrist Strap Small-XLarge 11.49
C. V425 Split Leather Full-Finger Anti-Vibe GlovesFull anti-vibe glove Split-cow leather palmAV GEL™ in palmGel foam in thumb, thumb joint and all fingersStretch backElastic cuff with hook and loop closureMachine wash and drySold per pair – specify size when ordering
Part Number Description Size PriceV14V425 V425 Split Leather Full-Finger Anti-Vibe Small-XLarge 20.49
D. V430 Split Leather Fingerless Anti-Vibe GlovesFingerless anti-vibe with split leather AV GEL™ padding AV GEL™ in palmGel foam in thumb, thumb joint and all fingersStretch backElastic cuff with hook and loop closureSold per pair—specify size when ordering
Part Number Description Size PriceV14V430 V430 Split Leather Fingerless Anti-Vibe Small-XLarge 13.99 V14V430-WS V430 Split Leather Fingerless Anti-Vibe with Wrist Strap Small-XLarge 17.99
E. V435 PRO Full-Finger Anti-Vibe Gloves Premium all-leather glove with AV GEL™ padding maximizes durability and comfort AV GEL™ in palmGel foam in thumb, thumb joint and all fingersElastic cuff with hook and loop closureSold per pair—specify size when ordering—lso available hand specific
Part Number Description Size PriceV14V435 V435 PRO Full-Finger Anti-Vibe Small-XLarge 33.99 V14V435-WS V435 PRO Full-Finger Anti-Vibe with Wrist Strap Small-XLarge 39.99
F. V440 PRO Fingerless Full-Leather Anti-Vibe Gloves Premium all-leather fingerless glove with AV GEL™ padding maximizes durability and comfort AV GEL™ in palm, thumb and index fingerNylon mesh back with hook and loop closureElastic cuff with hook and loop closureSold per pair—pecify size when ordering—also available hand specific
Part Number Description Size PriceV14V440 V440 PRO Full-Finger Anti-Vibe Small-XLarge 24.99 V14V440-WS V440 PRO Full-Finger Anti-Vibe with Wrist Strap Small-XLarge 33.99
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
V14V235V
Inst
rum
Con
fine
Fall
Pro
tect
ion
Han
dP
rote
ctio
n
190
Task Specific GlovesA
F
E
D
B
CV14V220
F
Spi
ll C
Con
tapp
Faci
lity
Sup
plie
sesm
able
rage
E
V14V340
V14V335
V14V255
A. V130 Mechanics Air Mesh GlovesAll-mesh back with padded knuckles make this glove extremely breathable for hot working conditionsDurable synthetic palmReinforced fingertips and stitchingHook and loop cuff for secure fitMachine washable
Part Number Description Size PriceV14V130-M V130 Mechanics Air Mesh Medium 13.49 V14V130-L V130 Mechanics Air Mesh Large 13.49 V14V130-XL V130 Mechanics Air Mesh XLarge 13.49 V14V130-2X V130 Mechanics Air Mesh 2XLarge 13.49
B. V140 Mechanics PRO GlovesA double layer of synthetic leather in the palm area ensures that this glove is super durable but remains comfortableNeoprene padded knucklesStretch backReinforced fingertips and stitchingHook and loop cuff for a secure fitMachine washable
Part Number Description Size PriceV14V140-M V140 Mechanics PRO Medium 15.99 V14V140-L V140 Mechanics PRO Large 15.99 V14V140-XL V140 Mechanics PRO XLarge 15.99 V14V140-2X V140 Mechanics PRO 2XLarge 15.99
C. V220 and V235 WORK PRO GlovesA medium-duty work glove with GripTech protective padsDurable synthetic leather palm with GripTech patches on palm and fingertipsTerry cloth sweat wipe on thumbStretch back with neoprene padded flex knuckleElastic cuff with hook and loop closureMachine washable
Part Number Description Size PriceV14V220-M V220 WORK PRO Medium-Duty Medium 17.99 V14V220-L V220 WORK PRO Medium-Duty Large 17.99 V14V220-XL V220 WORK PRO Medium-Duty XLarge 17.99V14V235-M V235 WORK PRO Medium-Duty, Open Finger Medium 17.99 V14V235-L V235 WORK PRO Medium-Duty, Open Finger Large 17.99 V14V235-XL V235 WORK PRO Medium-Duty, Open Finger XLarge 17.99
D. V255 Leather Utility GlovesAn all-purpose leather glove, with limited palm seams to maximize durabilityGenuine goatskin leatherDouble leather palm and thumb patches for long lifeStretch-knit backElastic cuff with hook and loop closureMachine washable
Part Number Description Size PriceV14V255-S V255 Leather Utility Small 8.99 V14V255-M V255 Leather Utility Medium 8.99 V14V255-L V255 Leather Utility Large 8.99 V14V255-XL V255 Leather Utility XLarge 8.99 V14V255-2X V255 Leather Utility 2XLarge 8.99
E. V340 Mesh Material Handling Fingerless GlovesGenuine leather with cotton mesh back fingerless designPadded leather palmSoft terry lining for comfort and durabilityHook and loop closure
Part Number Description Size PriceV14V340-S V340 Mesh Material Handling Fingerless Small 6.49 V14V340-M V340 Mesh Material Handling Fingerless Medium 6.49 V14V340-L V340 Mesh Material Handling Fingerless Large 6.49 V14V340-XL V340 Mesh Material Handling Fingerless XLarge 6.49 V14V340-2X V340 Mesh Material Handling Fingerless 2XLarge 6.49
F. V335 PRO Material Handling Fingerless GlovesPadded goat leather palm and fingers offer superior comfort and durabilityNylon stretch mesh backElastic cuff with hook and loop closureMachine washable
Part Number Description Size PriceV14V335-M V335 PRO Material Handling Fingerless Medium 15.79 V14V335-L V335 PRO Material Handling Fingerless Large 15.79 V14V335-XL V335 PRO Material Handling Fingerless XLarge 15.79 V14V335-2X V335 PRO Material Handling Fingerless 2XLarge 15.79
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
Hea
d an
d Fa
ce
PPtito
nH
eari
ngP
rote
ctio
npi
rato
ryte
ctio
n
192
Task Specific Gloves
A
FE
D
B
C
D
E
E. Ergodyne® ProFlex® 710 Full-Fingered Trades Gloves
Feature durable synthetic leather for soft, flexible and durable palm and finger construction with a reinforced thumb/index saddle for extra long wearPVC palm offers a secure grip while polymer gel dampens impact and shockWoven elastic cuff features an exclusive pull tab closureKnuckles are padded with neoprene and fingertips are reinforced for extended wearBreathable, padded stretch spandex backIdeal for automotive, sport and heavy-duty general applications
Part Number Description Size PriceE5716152 ProFlex® 710 Full-Fingered Trades Small 27.15 E5716153 ProFlex® 710 Full-Fingered Trades Medium 27.15 E5716154 ProFlex® 710 Full-Fingered Trades Large 27.15 E5716155 ProFlex® 710 Full-Fingered Trades XLarge 27.15 E5716156 ProFlex® 710 Full-Fingered Trades 2XLarge 27.15
F
F. Ergodyne® ProFlex® 720 Trades with Touch Control Gloves
Open tips on thumb, index and middle fingers provide the touch control feature, making it an excellent choice for carpentry, electronic service repair, assembly and utility applicationsSoft, flexible and durable synthetic leather palm and finger construction features reinforced thumb/index saddlePVC palm offers a secure grip while polymer gel dampens impact and shockWoven elastic cuff features pull tab closure. Knuckles are padded with neoprene, and back is made of breathable, padded stretch spandex
Part Number Description Size PriceE5716182 ProFlex® 720 Trades with Touch Control Small 26.25 E5716183 ProFlex® 720 Trades with Touch Control Medium 26.25 E5716184 ProFlex® 720 Trades with Touch Control Large 26.25 E5716185 ProFlex® 720 Trades with Touch Control XLarge 26.25 E5716186 ProFlex® 720 Trades with Touch Control 2XLarge 26.25
A. Radnor® Slip-On Mechanics GlovesSynthetic leather palmPadded two-way stretch spandex backShirred elastic backSlip-on cuff for easy on/off
Part Number Description Size PriceRAD64057351 Slip-On Mechanics, Black/Gray Medium 10.90 RAD64057352 Slip-On Mechanics, Black/Gray Large 10.90 RAD64057353 Slip-On Mechanics, Black/Gray XLarge 10.90 RAD64057354 Slip-On Mechanics, Black/Gray 2XLarge 10.90
B. Radnor® Light-Duty Mechanics GlovesSynthetic leather made by Clarino®
Padded two-way stretch spandex backReinforced fingertipsHook and loop cuff for secure fit
Part Number Description Size PriceRAD64057356 Light-Duty Mechanics, Black/Gray Medium 13.50 RAD64057357 Light-Duty Mechanics, Black/Gray Large 13.50 RAD64057358 Light-Duty Mechanics, Black/Gray XLarge 13.50 RAD64057359 Light-Duty Mechanics, Black/Gray 2XLarge 13.50
C. Radnor® Impact Mechanics GlovesSynthetic leather made by Clarino®
Padded two-way stretch spandex backTPR knuckle protectionReinforced fingertips and saddleEVA padded palm patchesHook and loop cuff for secure fit
Part Number Description Size PriceRAD64057361 Impact Mechanics, Black/Gray Medium 19.82 RAD64057362 Impact Mechanics, Black/Gray Large 19.82 RAD64057363 Impact Mechanics, Black/Gray XLarge 19.82 RAD64057364 Impact Mechanics, Black/Gray 2XLarge 19.82
D. Radnor® Heavy-Duty Mechanics GlovesSueded leather palmTwo-way stretch spandex back with neoprene knuckle pads Reinforced fingertips and DuPont™ Kevlar® saddle PVC grip patches on palm and fingersTerrycloth brow wipe on thumb Neoprene cuff with hook and loop closure
Part Number Description Size PriceRAD64057071 Heavy-Duty Mechanics, Hi-Viz Orange Medium 19.96 RAD64057072 Heavy-Duty Mechanics, Hi-Viz Orange Large 19.96 RAD64057073 Heavy-Duty Mechanics, Hi-Viz Orange XLarge 19.96 RAD64057074 Heavy-Duty Mechanics, Hi-Viz Orange 2XLarge 19.96RAD64057081 Heavy-Duty Mechanics, Black Medium 19.96 RAD64057082 Heavy-Duty Mechanics, Black Large 19.96 RAD64057083 Heavy-Duty Mechanics, Black XLarge 19.96 RAD64057084 Heavy-Duty Mechanics, Black 2XLarge 19.96
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
193
Task Specific Gloves
B
ectionP
rotectionP
rotec
TIL1475
TIL1480 TIL1485
TIL1470
tionH
andP
rotectionP
rotectiveW
orkwear
First Aid
Products
Spill C
ontpp
B
Top grain goatskin for best dexterity
Top grain cowhide is rugged and long lasting
Top grain deerskin is the softest and most comfortable
Top grain pigskin is 3M™ Thinsulate™ lined and is naturally moisture resistant
A. Tillman TrueFit™ GlovesDouble stitched, reinforced fingertip backs for heavy wear area protection Reinforced thumb to protect severe stress areas Rough side out reinforced palm for longer life and better grip Nylon spandex back for precision fit Elastic cuff with hook and loop closure provides secure fit
Part Number Description Size PriceTIL1470S TrueFit™ Grain Goatskin Small 12.25 TIL1470M TrueFit™ Grain Goatskin Medium 12.25 TIL1470L TrueFit™ Grain Goatskin Large 12.25 TIL1470XL TrueFit™ Grain Goatskin XLarge 12.25 TIL14702X TrueFit™ Grain Goatskin 2XLarge 12.25TIL1475S TrueFit™ Grain Cowhide Small 13.75 TIL1475M TrueFit™ Grain Cowhide Medium 13.75 TIL1475L TrueFit™ Grain Cowhide Large 13.75 TIL1475XL TrueFit™ Grain Cowhide XLarge 13.75 TIL14752X TrueFit™ Grain Cowhide 2XLarge 13.75TIL1480S TrueFit™ Grain Deerskin Small 17.25 TIL1480M TrueFit™ Grain Deerskin Medium 17.25 TIL1480L TrueFit™ Grain Deerskin Large 17.25 TIL1480XL TrueFit™ Grain Deerskin XLarge 17.25 TIL14802X TrueFit™ Grain Deerskin 2XLarge 17.25TIL1485M TrueFit™ Grain Pigskin, Thinsulate™ Lined Medium 13.50 TIL1485L TrueFit™ Grain Pigskin, Thinsulate™ Lined Large 13.50 TIL1485XL TrueFit™ Grain Pigskin, Thinsulate™ Lined XLarge 13.50 TIL14852X TrueFit™ Grain Pigskin, Thinsulate™ Lined 2XLarge 13.50
B. Tillman TrueFit™ Ultra GlovesTop grain goatskin for best dexterity Double reinforced fingertips maximize protection Reinforced thumb to protect severe stress areas Reinforced palm to the base of the fingers for added protection with additional padding for increased comfort Breathable finger design wicks away moisture Nylon spandex back for precision fit Longer elastic cuff with hook and loop closure provides additional support and a secure fit
Part Number Description Size PriceTIL1490S TrueFit™ Ultra Grain Goatskin Small 16.50 TIL1490M TrueFit™ Ultra Grain Goatskin Medium 16.50 TIL1490L TrueFit™ Ultra Grain Goatskin Large 16.50 TIL1490XL TrueFit™ Ultra Grain Goatskin XLarge 16.50 TIL14902X TrueFit™ Ultra Grain Goatskin 2XLarge 16.50
C. Mechanix Wear® Fabricator GlovesDesigned for welders and fabricators who need a tough leather glove 100% Leather construction keeps wear to a minimum Heat resistant cowhide palm, cuff and thumb Dual-layer leather reinforcement panels on palm, index finger, thumb and knuckle band Comfortable suede leather top and fingers Fingertip reinforcements on ring, middle and index fingers Oversize cuff with easy-entry, hook and loop closure
Part Number Description Size PriceMF1MFG-05-009 Fabricator Medium 54.95 MF1MFG-05-010 Fabricator Large 54.95 MF1MFG-05-011 Fabricator XLarge 54.95
Price54.9554.9554.95
C
A
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
Pro
tect
iC
onfin
ed S
pace
194
Mechanic’s and Anti-Vibration/Impact GlovesA
E
D
B
C
A. M-Pact® GlovesDie cut multi-layer synthetic leather palm with NEW Poron anti-microbial, impact-dissipating interior foam paddingNow only 2.5 mm thick, offering more dexterity, impact and vibration protection than beforeTwo-ply fingertips and thumb with ultra-sensitive designTwo-way, stretch Spandex padded backThermal Plastic Rubber (TPR) molded rib panels on back for added protection Elastic cuff with hook and loop closureConcealed interior seam stitchingMachine washableSold per pair, specify size
Part Number Description Color Size PriceMF1MPT-58 M-Pact® Black and Gray Small-2XLarge 36.95 MF1MPT-03 M-Pact® Blue and Gray Small-2XLarge 36.95 MF1MPT-02 M-Pact® Red and Gray Small-2XLarge 36.95
B. M-Pact® 2 GlovesClarino® synthetic leather with EVA foam padded impact zones Accordion design knuckle pad with dense EVA foam padding and impact absorbing molded rubber finger protection on back Sure grip rubberized panels on thumb, fingertips and palm improve control Two-ply fingertips and thumb reduce wear and increase protection Stretch panels between fingers add comfort and ventilation Neoprene cuff with additional wrist protection has TPR hook and loop closureMachine washableSold per pair, specify size and color
Part Number Description Color Size PriceMF1MP2-05 M-Pact® 2 Black Small-2XLarge 40.95 MF1MP2-03 M-Pact® 2 Blue Small-2XLarge 40.95 MF1MP2-02 M-Pact® 2 Red Small-2XLarge 40.95
C. Impact Pro GlovesDURA-FIT™ synthetic leather palm offers maximum comfort, durability and breathes like leatherTwo-way, stretch Spandex top increases ventilation, comfort and fitContoured, dual-layered, padded palm heel increases flexibility and grip Thermal plastic rubber-molded rib panels protect the back of your hand, knuckles and fingersMachine washableSold per pair
Part Number Description Size PriceMF1H30-05-009 Impact Pro Medium 34.99 MF1H30-05-010 Impact Pro Large 34.99 MF1H30-05-011 Impact Pro XLarge 34.99
D. CG Impact Pro GlovesGenuine leather panels are durable, comfortable and reinforce high wear areasTwo-way, stretch Spandex top increases ventilation, comfort and fitContoured dual-layered, padded palm heel increases flexibility and protectionThermal plastic rubber-molded rib panels protect the back of your hand, knuckles and fingersHook and look closure provides a secure fitSold per pair
Part Number Description Size PriceMF1CG30-75-009 CG Impact Pro Medium 39.99 MF1CG30-75-010 CG Impact Pro Large 39.99 MF1CG30-75-011 CG Impact Pro XLarge 39.99
E. CG Heavy-Duty GlovesGenuine leather panels are durable, comfortable and reinforce high wear areasTwo-way, stretch Spandex top increases ventilation, comfort and fitFlexible molded rubber ribbing provide complete protection for the top of the hand where abrasion and impacts are commonContoured multi-zone padded palm heel provides greater protectionLow profile wrist cuff with hook and loop closure allows for a full range of motionSold per pair
Part Number Description Size PriceMF1CG40-75-009 CG Heavy-Duty Medium 41.99 MF1CG40-75-010 CG Heavy-Duty Large 41.99 MF1CG40-75-011 CG Heavy-Duty XLarge 41.99
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
C
D
B
195
Task Specific Gloves
B. Ergodyne® ProFlex® 925F(x) Dorsal Impact Reducing Gloves
Molded TPR armor on knuckles, fingers and carpal wrist bones for impact protection, pinch injury prevention and blow deflectionArmor flex zones for high dexterity5 mm EVA dorsal pad protects vulnerable metacarpal region5 mm EVA palm and ulnar padding protects against chopping blowsAbrasion-resistant PVC on palm and three fingers limits liquid penetration; hi-viz orange for hand signalingNon-slip Armortex® reinforcement zones on thumb saddle and index finger for enhanced grip and durability Reinforced Kevlar® palm stitching for extended wear and durabilityReflective accents and hi-viz color scheme for optimal hand visibilityContoured neoprene cuff with reflective pull-on tab resists snagging while offering a secure fit and easy on/offDesigned for use in oil/gas drilling extraction and refining, fracting, tool pushing, mining, demolition, heavy construction, cargo handling and ironwork
Part Number Description Size PriceE5716052 ProFlex® 925F(x) Dorsal Impact Reducing Small 34.95 E5716053 ProFlex® 925F(x) Dorsal Impact Reducing Medium 34.95 E5716054 ProFlex® 925F(x) Dorsal Impact Reducing Large 34.95 E5716055 ProFlex® 925F(x) Dorsal Impact Reducing XLarge 34.95 C. Ergodyne® ProFlex® 925F(x) WP Thermal Waterproof Dorsal Impact-Reducing GlovesMaximum back-of-hand impact protection meets superior abrasion resistance, dexterity and grip; thermal and waterproof for cold weather applications.
Molded TPR armor on knuckles, fingers and carpal bone for impact protection, pinch injury prevention, and blow deflection Armor “flex zones” for high dexterity 5 mm EVA dorsal pad protects vulnerable metacarpal region 5 mm EVA palm and ulnar padding protects against “chopping” blows 40 grams of 3M™ Thinsulate™ InsulationHipora® breathable waterproof and windproof liner Abrasion-resistant PVC on palm and 3 fingers limits liquid penetration; hi-viz orange for hand signaling Non-slip Armortex® reinforcement zones on thumb saddle and index finger for enhanced protection, grip and durability Reinforced Kevlar® palm stitching for extended wear and durability Reflective accents and hi-viz color scheme for optimal hand visibility Contoured neoprene cuff with reflective pull-on tab resists snagging while offering a secure fit and easy on/off
Part Number Description Size PriceE5716193 ProFlex® 925F(x)WP Thermal Waterproof Medium 46.65 Dorsal Impact-Reducing E5716194 ProFlex® 925F(x)WP Thermal Waterproof Large 46.65 Dorsal Impact-Reducing E5716195 ProFlex® 925F(x)WP Thermal Waterproof XLarge 46.65 Dorsal Impact-Reducing E5716196 ProFlex® 925F(x)WP Thermal Waterproof 2XLarge 46.65 Dorsal Impact-Reducing
D. Ergodyne® ProFlex® 710CR Cut-Resistant Trades GlovesLined with 100% DuPont™ Kevlar® to provide cut resistance throughout the gloveANSI 105//EN 388 Level 3 cut protection on the palmVisco-elastic gel polymer palm pad to dampen shock and impactAbrasion resistant PVC on palm and fingersBreathable stretch spandex with neoprene knuckle padSynthetic leather palm and fingersTerry thumb brow wipeFlex zones for added comfortReinforced fingertips for optimal durability
Part Number Description Size PriceE5716203 ProFlex® 710CR Cut-Resistant Trades Medium 39.95 E5716204 ProFlex® 710CR Cut-Resistant Trades Large 39.95 E5716205 ProFlex® 710CR Cut-Resistant Trades XLarge 39.95 E5716206 ProFlex® 710CR Cut-Resistant Trades 2XLarge 39.95
A. West Chester R2™ Safety GlovesOil resistant synthetic leather palm with high visibility red silicone pattern for enhanced visibility and gripFlexible 4-way stretch form fitting high visiblity spandex backTPR finger, hand and knuckle guards to protect against bumps and bruisesReinforced thermoplastic fingertips to reduce pinches; Kevlar® reinforced thumb saddleExtended neoprene cuff with ID tag for personal indentificationR2™ Safety Winter Gloves lined with 40 gram 3M™ Thinsulate™ Insulation and Enprotex® waterproof barrierMeet or exceed mining standards for abrasion (ASTM D3884) and impact (ASTM D2632)
Part Number Desciption Size PriceWEC86712/M R2™ Safety Medium 29.15 WEC86712/L R2™ Safety Large 29.15 WEC86712/XL R2™ Safety XLarge 29.15 WEC86712/XXL R2™ Safety XXLarge 29.15WEC86711/M R2™ Safety Winter Medium 37.74 WEC86711/L R2™ Safety Winter Large 37.74 WEC86711/XL R2™ Safety Winter XLarge 37.74 WEC86711/XXL R2™ Safety Winter XXLarge 37.74
WEC86712
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
196
INFORMATION FOR YOUR SAFETY
Hand Protection Information
Grain
Split
ShoulderSide
Shoulder
Belly
Belly
Side
Cuts of Leather
Cross-section of leather hide
GRAIN –– Grain leather is the smooth exterior side of the hide. Grain leather provides durability and dexterity. SPLIT –– Split leather is the rougher interior side of the hide. The different types of split are side, shoulder or belly split.
Side Split –– Side split comes from the rib area of the animal. This part of the leather is the most durable and provides the greatest protection because of its greater density of fibers.
Shoulder Split –– Shoulder split is more economical than side split, but less durable. The additional movement of the animal in this shoulder area creates less fibers and a more visible texture difference.
Belly Split –– Belly split leather is the most economical; however it has the least consistency of texture and appearance.
Leather Types
PerformanceGrain
PigskinGrain
CowhideSplit
CowhideGrain
DeerskinGrain
Goatskin
Abrasion Resistance Best High High Fair High
Puncture Resistance High Best Best Fair High
Tensile Strength Good High High Best High
Breathability Best Fair Fair Fair Fair
Flexibility High Good Fair High High
Tactile Sensitivity High Good Fair High High
Insulation Ability Low Good Good Best Low
Moisture Resistance Best Fair Fair Better Good
Relative Cost Low Mid-Range Low High Mid-Range
Glove ConstructionGunn CutFeatures –– Seamless on back. The palm side of the middle two fingers is a separate glove pattern and is sewn to the palm at the base of the middle two fingers. In full leather and leather palm styles, the seam is reinforced with a welt that gives additional resistance to wear in this critical area.Benefits –– Seam in natural hand crease allows flexibility; seamless back increases comfort. Finger seams away from the palm increase gloves’ durability and wear life.
Gunn CutSeamless back. Seam is located at the natural hand crease and allows flexibility. Usually found on leather gloves, the gunn cut gives added strength to the wear areas.
Cuff MaterialsLeather –– For longer wear and heavy-duty applications (launderable).
Denim –– Economical single-fabric material (launderable).
Duck –– Single ply of cotton material (launderable).
Plasticized –– Waterproof polyethylene layer laminated between two pieces of fabric (launderable).
Rubberized –– Two layers of fabric with a rubber material in between. Adds water resistance in addition to heavier wear resistance.
Starched –– Two layers of fabric laminated, then starched (launderable).
Leather TypesCow — Cowhide is the most commonly used leather in the glove industry due to its abundance. The advantages include comfort, durability, excellent abrasion resistance and breathability.Pig — Pigskin affords the greatest breathability due to the porous texture of this hide. Additionally, pigskin tends to become softer with use and withstands moisture without stiffening. When laundered, this leather will return more to its natural soft texture than other leathers.Goat — Independent tests have proven that grain goatskin is twice as durable as cow grain and pig grain leather. The natural lanolin produced by goats helps to create the softest, most abrasion-resistant leather. This leather is highly recommended for applications requiring tactile sensitivity.Deer –– Known to be one of nature’s most luxurious, softest leathers, providing all day comfort and sensitivity to touch.
The chart to the right provides an indication of how types of leather perform.
Leather Gloves
Clute CutFeatures –– Seamless palm made from a continuous piece of leather. Back of glove has parallel seams. Finger side seams are toward palm side of glove. Benefits –– Provides a roomy fit. Seamless palm means greater ease of movement and comfortable gripping. Primarily used in fabric gloves and lightweight leathers.
Clute CutBack of glove has parallel seams. Provides comfortable fit. Usually found on cotton and leather gloves.
Straight Thumb
Keystone Thumb
Wing Thumb
Thumb Styles Straight Thumb –– Designed for the close fisted work. The seams are out of the wear area during gripping activities.Keystone Thumb –– Allows the greatest freedom of movement and is the most comfortable. Used for similar activities as wing thumb.Wing Thumb –– Designed for open handed work such as pushing, pulling and lifting.
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
Hand
Protection
Prottteceeececececcctititititittiveveveveve
Wo
Wooorkrrrkrkrkkkww
earrFirst A
idP
roductsS
pillC
onpp
197
Leather Palm Work Gloves
A
E
D
B
C
Circle patch for reinforcement
A. Economy Leather Palm, Denim Back Work GlovesEconomy grade split leatherReinforced leather knuckle strap, pull tab, full index finger and fingertipsDenim back and safety cuffPalm patch available for additional savings
Part Number Description Size PriceRAD64057591 Denim Back, Palm Patch, Safety Cuff Large 1.65 RAD64057592 Denim Back, Safety Cuff Large 1.94
B. Economy Leather Palm and Circle Patch Work GlovesEconomy grade split leatherCircle patch option provides additional reinforcement Clute cut patternStriped canvas back and a knitwrist
Part Number Description Size PriceRAD64057509 Leather Palm, Knitwrist Men’s 1.41 RAD64057510 Leather Palm, Knitwrist Ladies’ 1.41RAD64057511 Leather Palm with Circle Patch, Knitwrist Men’s 1.69 RAD64057512 Leather Palm with Circle Patch, Knitwrist Ladies’ 1.69
C. Economy Leather Patch Palm Work GlovesEconomy grade split leatherPatch palmReinforced leather knuckle strap, pull tab, full index finger and fingertipsStriped canvas back and starched safety cuff
Part Number Description Size PriceRAD64057999 Economy Leather Patch Palm, Safety Cuff Men’s 1.67
D. Economy Leather Palm Work GlovesEconomy grade split leatherReinforced leather knuckle strap, pull tab, full index finger and fingertipsStriped canvas back and starched safety cuff
Part Number Description Size PriceRAD64057593 Economy Leather Palm, Safety Cuff Men’s 1.84 RAD64057594 Economy Leather Palm, Safety Cuff Ladies’ 1.84
E. Economy Leather Palm Work GlovesEconomy grade split leatherReinforced knuckle strap, pull tab, full index finger and fingertipsStriped canvas back with matching starched safety or gauntlet cuffs
Part Number Description Size PriceRAD64057513 Economy Leather Palm, Safety Cuff Small 1.94 RAD64057514 Economy Leather Palm, Safety Cuff Medium 1.94 RAD64057515 Economy Leather Palm, Safety Cuff Large 1.94 RAD64057516 Economy Leather Palm, Safety Cuff XLarge 2.04RAD64057518 Economy Leather Palm, Gauntlet Cuff Large 2.10
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
D
B
C
199
Leather Palm Work Gloves
A. High Visibility Select Shoulder Leather Palm Work GlovesSelect shoulder leather provides valueFluorescent orange polyester back with green accents and silver reflective tape across knuckles and around cuff21⁄2” Rubberized safety cuff
Part Number Description Size PriceRAD64057028 Select Shoulder Leather Palm, Safety Cuff Large 5.55 RAD64057029 Select Shoulder Leather Palm, Safety Cuff XLarge 5.82
B. Select Shoulder Leather Palm Work GlovesSelect shoulder grade split leatherClute cut, heavy yellow canvas backStraight thumbKnitwrist to keep debris out and warmth in
Part Number Descr iption Size PriceRAD64057533 Select Shoulder Leather Palm, Knitwrist Men’s 1.86 RAD64057534 Select Shoulder Leather Palm, Knitwrist Ladies’ 1.86
C. Premium Select Shoulder Leather Palm Work GlovesPremium select shoulder grade split leatherReinforced leather knuckle strap, pull tab, full index finger and fingertipsFull feature gunn cut with wing thumbHeavy yellow canvas back with matching rubberized safety cuff
Part Number Description Size PriceRAD64057921 Premium Select Shoulder Leather Palm, Safety Cuff Small 3.37 RAD64057922 Premium Select Shoulder Leather Palm, Safety Cuff Medium 3.37 RAD64057923 Premium Select Shoulder Leather Palm, Safety Cuff Large 3.37 RAD64057924 Premium Select Shoulder Leather Palm, Safety Cuff XLarge 3.55 RAD64057925 Premium Select Shoulder Leather Palm, Safety Cuff 2XLarge 3.73
D. Premium Select Shoulder Leather Palm Work GlovesPremium select shoulder grade split leatherReinforced leather knuckle strap, pull tab, full index finger and fingertipsFull feature gunn cut with wing thumbDark brown leather to hide dirtHeavy yellow canvas back with matching rubberized safety cuff
Part Number Description Size PriceRAD64057984 Premium Select Shoulder Leather Palm, Safety Cuff Large 4.27
E. Premium Select Shoulder Leather Palm Work GlovesPremium select shoulder grade split leather Reinforced leather knuckle strap, pull tab, full index finger and fingertipsFull feature gunn cut with wing thumbHeavy white duck canvas back with matching rubberized safety cuff
Part Number Description Size PriceRAD64057555 Premium Select Shoulder Leather Palm, Safety Cuff Large 3.80
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
A. Side Split Leather Palm Work GlovesSide split leather gloves offering outstanding durability resulting from greater density of fibersPremium split leather grade is slightly thicker and offers more consistant qualityDuck canvas back with reinforced leather knuckle strap, pull tab, full index finger and fingertipsFull feature gunn cut with wing thumbSewn with super-strong heat resistant DuPont™ Kevlar® thread to prevent wear-through
Part Number Description Size PriceRAD64057558 Side Split Leather Palm, Knitwrist Large 3.78RAD64057560 Side Split Leather Palm, Safety Cuff Small 4.33 RAD64057561 Side Split Leather Palm, Safety Cuff Medium 4.33 RAD64057562 Side Split Leather Palm, Safety Cuff Large 4.33 RAD64057563 Side Split Leather Palm, Safety Cuff XLarge 4.55 RAD64057564 Side Split Leather Palm, Safety Cuff 2XLarge 4.78RAD64057568 Side Split Leather Palm, Gauntlet Cuff Large 4.77 RAD64057569 Side Split Leather Palm, Gauntlet Cuff XLarge 5.00 RAD64057570 Side Split Leather Palm, Gauntlet Cuff 2XLarge 5.26RAD64057585 Premium Side Split Leather Palm, Safety Cuff Small 5.35 RAD64057586 Premium Side Split Leather Palm, Safety Cuff Medium 5.35 RAD64057587 Premium Side Split Leather Palm, Safety Cuff Large 5.35 RAD64057588 Premium Side Split Leather Palm, Safety Cuff XLarge 5.61RAD64057928 Premium Side Split Leather Palm, Gauntlet Cuff Small 5.82 RAD64057929 Premium Side Split Leather Palm, Gauntlet Cuff Medium 5.82 RAD64057930 Premium Side Split Leather Palm, Gauntlet Cuff Large 5.82 RAD64057931 Premium Side Split Leather Palm, Gauntlet Cuff XLarge 6.07
B. Side Split Double Leather Palm Work GlovesChoose from side split leather gloves offering outstanding durability resulting from greater density of fibersPremium split leather grade is slightly thicker and offers more consistant qualityAvailable with double leather on palm, index finger and thumb for enhanced protection with the addition of double leather on the middle fingersSewn with extra-strong, heat-resistant DuPont™ Kevlar® thread
Part Number Description Size PriceRAD64057572 Double Leather Palm, Safety Cuff Large 5.45RAD64057576 Double Leather Palm, Fingers Large 5.78 & Thumb, Safety Cuff RAD64057962 Premium Side Split Double Palm, Safety Cuff Large 6.53 RAD64057936 Premium Side Split Double Palm, Gauntlet Cuff Large 7.10
C. Side Split Full Leather Back Work GlovesSide split leather with full leather back for added protectionFull feature gunn cut with wing thumbSewn with super-strong heat resistant DuPont™ Kevlar® thread to prevent wear-through
Part Number Description Size PriceRAD64057578 Full Leather Back, Safety Cuff Large 5.24
D. Side Split Full Leather Back Work Gloves with Double Leather Palm
Side split full leather back work glovesDouble leather on palm, fingers and thumb for ultimate durabilityAvailable with rubberized safety cuff or gauntlet cuffSewn with extra strong DuPont™ Kevlar® threadSafety cuff version has third layer of leather to reinforce thumb crotch
Part Number Description Size PriceRAD64057580 Double Leather Palm, Fingers, Thumb Medium 7.77 Full Leather Back, Gauntlet Cuff RAD64057581 Double Leather Palm, Fingers, Thumb Large 7.77 Full Leather Back, Gauntlet Cuff RAD64057582 Double Leather Palm, Fingers, Thumb XLarge 8.16 Full Leather Back, Gauntlet Cuff RAD64057583 Double Leather Palm, Fingers, Thumb 2XLarge 8.57 Full Leather Back, Gauntlet Cuff RAD64057566 Double Leather Palm, Fingers, Thumb Third Large 7.65 Layer of Leather Reinforced Thumb Crotch, Full Leather Back, Safety Cuff
A
B
C
D
200
Leather Palm Work Gloves
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
D
C
BA
201
Leather Palm Work Gloves
Call us!
Additional styles and sizes available.
A. Premium Grain Cowhide Leather Palm Work GlovesUnlined premium top-grain cowhide leather provides greater dexterityNatural white canvas back with reinforced leather knuckle strap, pull tab, full index finger and fingertipsFull feature gunn cut with wing thumb
Part Number Description Size PriceRAD64057504 Premium Grain Cowhide, Safety Cuff Small 6.28 RAD64057501 Premium Grain Cowhide, Safety Cuff Medium 6.28 RAD64057502 Premium Grain Cowhide, Safety Cuff Large 6.28 RAD64057503 Premium Grain Cowhide, Safety Cuff XLarge 6.59RAD64057911 Premium Grain Cowhide, Gauntlet Cuff Small 6.75 RAD64057912 Premium Grain Cowhide, Gauntlet Cuff Medium 6.75 RAD64057913 Premium Grain Cowhide, Gauntlet Cuff Large 6.75 RAD64057914 Premium Grain Cowhide, Gauntlet Cuff XLarge 7.08
B. Split Pigskin Leather Palm Work GlovesSelect grade split leather pigskinStriped canvas back with reinforced leather knuckle strap, pull tab, full index finger and fingertipsRubberized safety cuff
Part Number Description Size PriceRAD64057916 Split Pigskin Leather, Safety Cuff Large 2.88
C. Premium Split Pigskin Leather Palm Work GlovesPremium split pigskin leather is more breathable and withstands moistureStriped canvas back with reinforced leather knuckle strap, pull tab, full index finger and fingertipsRubberized safety cuff or gauntlet cuff
Part Number Description Size PriceRAD64057917 Premium Split Pigskin, Safety Cuff Large 4.67 RAD64057918 Premium Split Pigskin, Gauntlet Large 4.84
D. Premium Grain Goatskin Leather Palm Work GlovesPremium grain goatskin is a softer leather with greater tactile sensitivityRed fabric back with reinforced leather knuckle strap, pull tab, full index finger and fingertipsOutwear other leathers of same weight Rubberized safety cuff
Part Number Description Size PriceRAD64057336 Premium Goatskin Leather, Safety Cuff Large 7.12
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
Keystone Thumb
A
F
E
D
B
CCon
finP
rote
ctio
n
C
Pro
Con
tain
men
tS
uppl
ies
E
A
202
Drivers Gloves
A. Split Cowhide Drivers GlovesUnlined split cowhide offers protection at an affordable priceStraight thumbShirred elastic back and slip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057433 Split Cowhide, Straight Thumb Small 2.96 RAD64057434 Split Cowhide, Straight Thumb Medium 2.96 RAD64057435 Split Cowhide, Straight Thumb Large 2.96 RAD64057436 Split Cowhide, Straight Thumb XLarge 3.12
B. Premium Split Cowhide Drivers GlovesUnlined premium split cowhide provides improved consistencyKeystone thumbShirred elastic back and slip-on cuff with color-coded hem for easy size identification
Part Number Description Size PriceRAD64057994 Split Cowhide, Keystone Thumb Small 3.94 RAD64057995 Split Cowhide, Keystone Thumb Medium 3.94 RAD64057996 Split Cowhide, Keystone Thumb Large 3.94 RAD64057997 Split Cowhide, Keystone Thumb XLarge 4.14
C. Grain Palm/Split Leather Back Cowhide Drivers GlovesUnlined grain cowhide palm for durability with split leather back for savingsSewn with DuPont™ Kevlar® thread for added strengthKeystone thumb Shirred elastic back and slip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057443 Grain /Split Cowhide, Keystone Thumb Small 6.53 RAD64057444 Grain /Split Cowhide, Keystone Thumb Medium 6.53 RAD64057445 Grain /Split Cowhide, Keystone Thumb Large 6.53 RAD64057446 Grain /Split Cowhide, Keystone Thumb XLarge 6.86 RAD64057447 Grain /Split Cowhide, Keystone Thumb 2XLarge 7.22
D. Premium Combo Split/Grain Cowhide Premium Drivers GlovesConsistent thick, pliable leather for strength and comfortSuperior workmanship for long lasting wearKeystone thumb allows for maximum flexibilityRolled hem provides added strength Tapered fit with shirred elastic back
Part Number Description Size PriceRAD64057340 Premium Combo Split/Grain Cowhide, Keystone Thumb Small 8.35 RAD64057341 Premium Combo Split/Grain Cowhide, Keystone Thumb Medium 8.35 RAD64057342 Premium Combo Split/Grain Cowhide, Keystone Thumb Large 8.35 RAD64057343 Premium Combo Split/Grain Cowhide, Keystone Thumb XLarge 8.35 RAD64057344 Premium Combo Split/Grain Cowhide, Keystone Thumb 2XLarge 8.75
E. Grain Cowhide Drivers GlovesUnlined grain cowhide is the most commonly used grain leather having good abrasion resistanceChoice of straight or keystone thumbPremium styles provide a more uniform thickness and tensile strength for improved durabilityShirred elastic back and slip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057400 Grain Cowhide, Straight Thumb Small 6.96 RAD64057401 Grain Cowhide, Straight Thumb Medium 6.96 RAD64057402 Grain Cowhide, Straight Thumb Large 6.96 RAD64057403 Grain Cowhide, Straight Thumb XLarge 7.31RAD64057406 Grain Cowhide, Keystone Thumb Small 7.16 RAD64057407 Grain Cowhide, Keystone Thumb Medium 7.16 RAD64057408 Grain Cowhide, Keystone Thumb Large 7.16 RAD64057409 Grain Cowhide, Keystone Thumb XLarge 7.51 RAD64057487 Grain Cowhide, Keystone Thumb 2XLarge 7.88RAD64057851 Premium Grain Cowhide, Keystone Thumb Small 9.68 RAD64057852 Premium Grain Cowhide, Keystone Thumb Medium 9.68 RAD64057853 Premium Grain Cowhide, Keystone Thumb Large 9.68 RAD64057854 Premium Grain Cowhide, Keystone Thumb XLarge 10.14
F. Grain Cowhide Drivers Gloves with Pull StrapUnlined grain cowhideStraight thumbLeather strap buckle at wrist for adjustable fitSlip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057987 Grain Cowhide, Straight Thumb Small 7.41 RAD64057488 Grain Cowhide, Straight Thumb Medium 7.41 RAD64057489 Grain Cowhide, Straight Thumb Large 7.41 RAD64057490 Grain Cowhide, Straight Thumb XLarge 7.78
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
F
E
D
B
C
203
Drivers Gloves
Keystone Thumb
Keystone Thumb
A. Premium Grain Double Leather Palm Cowhide Drivers GlovesUnlined premium grain cowhide with double leather palm for added protectionKeystone thumbShirred elastic back and slip-on cuff with double stitched hem
Part Number Description Size PriceRAD64057314 Premium Grain Cowhide Double Palm, Keystone Thumb Small 11.97 RAD64057315 Premium Grain Cowhide Double Palm, Keystone Thumb Medium 11.97 RAD64057316 Premium Grain Cowhide Double Palm, Keystone Thumb Large 11.97 RAD64057317 Premium Grain Cowhide Double Palm, Keystone Thumb XLarge 12.57
B. WATCH YOUR HANDS Grain Cowhide Drivers GlovesUnlined grain cowhideFlame retardent Hi-Viz orange fingertips and a Hi-Viz reminder to WATCH YOUR HANDSFlexible keystone thumb constructionShirred elastic back and slip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057042 WATCH YOUR HANDS Cowhide Drivers Small 8.16 RAD64057043 WATCH YOUR HANDS Cowhide Drivers Medium 8.16 RAD64057044 WATCH YOUR HANDS Cowhide Drivers Large 8.16 RAD64057045 WATCH YOUR HANDS Cowhide Drivers XLarge 8.57
C. High Visibility Grain Cowhide Drivers GlovesUnlined grain cowhide with fluorescent orange polyester back3M™ Scotchlite Reflective material with a 3⁄4” green band accent across knucklesReflective tape meets ANSI/ISEA 107-2004 Level 2 standard for retroreflective performanceShirred elastic back and slip-on cuff with color coded hem for size identification
Part Number Description Size PriceRAD64057046 Grain Cowhide, Keystone Thumb Small 8.77 RAD64057047 Grain Cowhide, Keystone Thumb Medium 8.77 RAD64057048 Grain Cowhide, Keystone Thumb Large 8.77 RAD64057049 Grain Cowhide, Keystone Thumb XLarge 9.20
D. Grain Pigskin Drivers GlovesUnlined grain pigskin offers unparalleled abrasion resistance, is extremely breathable and resists moisture to remain pliablePremium styles provide improved consistency and qualityChoice of straight or keystone thumbShirred elastic back and slip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057464 Grain Pigskin, Straight Thumb Small 5.31 RAD64057465 Grain Pigskin, Straight Thumb Medium 5.31 RAD64057466 Grain Pigskin, Straight Thumb Large 5.31 RAD64057467 Grain Pigskin, Straight Thumb XLarge 5.59RAD64057095 Grain Pigskin, Keystone Thumb Small 5.47 RAD64057096 Grain Pigskin, Keystone Thumb Medium 5.47 RAD64057097 Grain Pigskin, Keystone Thumb Large 5.47 RAD64057098 Grain Pigskin, Keystone Thumb XLarge 5.75RAD64057468 Premium Grain Pigskin, Keystone Thumb Small 5.78 RAD64057469 Premium Grain Pigskin, Keystone Thumb Medium 5.78 RAD64057470 Premium Grain Pigskin, Keystone Thumb Large 5.78 RAD64057471 Premium Grain Pigskin, Keystone Thumb XLarge 6.08
E. Premium Grain Goatskin Drivers GlovesUnlined premium grain goatskin offers greater durability than grain cowhideHighly recommended for applications requiring tactile sensitivityChoice of straight or keystone thumbShirred elastic back and slip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057021 Premium Grain Goatskin, Straight Thumb Small 8.08 RAD64057022 Premium Grain Goatskin, Straight Thumb Medium 8.08 RAD64057023 Premium Grain Goatskin, Straight Thumb Large 8.08 RAD64057024 Premium Grain Goatskin, Straight Thumb XLarge 8.49RAD64057483 Premium Grain Goatskin, Keystone Thumb Small 8.28 RAD64057484 Premium Grain Goatskin, Keystone Thumb Medium 8.28 RAD64057485 Premium Grain Goatskin, Keystone Thumb Large 8.28 RAD64057486 Premium Grain Goatskin, Keystone Thumb XLarge 8.69
F. Premium Grain Deerskin Drivers GlovesUnlined premium grain deerskin is soft and has good insulating propertiesNaturally soft leather for unmatched comfortKeystone thumbShirred elastic back and slip-on cuff with double stitched hem
Part Number Description Size PriceRAD64057988 Premium Grain Deerskin, Keystone Thumb XSmall 15.95 RAD64057989 Premium Grain Deerskin, Keystone Thumb Small 15.95 RAD64057990 Premium Grain Deerskin, Keystone Thumb Medium 15.95 RAD64057991 Premium Grain Deerskin, Keystone Thumb Large 15.95 RAD64057992 Premium Grain Deerskin, Keystone Thumb XLarge 16.75
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
Pro
duct
sp Co
Co
Co
Co
Co
Con
tntntnaia
nmen
tpp
y esFa
ll P
rote
ctio
Haaaan
dndndndnnnP
rtttot
cececeeeeetion
rote
ctiv
eor
kwea
r
204
Welding Gloves
A
F
E
D
B
C
WeltingA thin piece of leather sewn into a seam towards the outside of the glove to protect seams from abrasions. Protects seam stitching on welding gloves from sparks reducing burn-through.
Welting
A. Economy Shoulder Split Cowhide Welders GlovesEconomy grade shoulder split cowhideFeature wing thumb, cotton lining, cotton stitching and fully welted fingersSold per pair
Part Number Description Size PriceRAD64057690 Gray 14” Economy Shoulder Welders Large 4.06
B. Shoulder Split Cowhide Welders GlovesStandard shoulder split cowhideFeature wing thumb, cotton lining, cotton stitching and fully welted fingers Available in pearl or brown Sold per pair or left hand only (pearl)
Part Number Description Size PriceRAD64057601 Pearl 14” Shoulder Welders, Carded Large 5.95 RAD64057603 Pearl 14” Shoulder Welders, Left Hand Only Large 3.00RAD64057606 Brown 14” Shoulder Welders, Carded Large 6.25
C. Select Shoulder Split Cowhide Welders GlovesBlack select shoulder split cowhideWelted fingers and heat-resistant DuPont™ Kevlar® stitchingWing thumb and cotton sock liningSold per pair
Part Number Description Size PriceRAD64057611 Black 14” Select Welders, Carded Large 8.75
D. Select Shoulder Split Cowhide Welders Gloves with Reinforced Thumb
Select shoulder split cowhideFeature reinforced straight thumb for added protection and strengthCotton lined for comfort and moisture absorptionDuPont™ Kevlar® sewn for added strength and heat resistance with fully welted fingers to protect stitching from burn and abrasionSold per pair or left hand only
Part Number Description Size PriceRAD64057626 Brown 14” Slightly Select Welders, Carded Large 7.95RAD64057631 Brown 14” Select Welders, Carded Large 8.95 RAD64057633 Brown 14” Select Welders, Left Hand Only Large 4.50
E. Premium Side Split Cowhide Welders GlovesPremium side split cowhideFeature wing thumb and cotton lining for moisture absorptionDuPont™ Kevlar® sewn for added strength and heat resistance with fully welted fingers to protect stitching from burn and abrasionAvailable in Brown or BlueSold per pair or left hand only (brown)
Part Number Description Size PriceRAD64057621 Brown 14” Premium Welders, Carded Large 10.25 RAD64057623 Brown 14” Premium Welders, Left Hand Only Large 4.95RAD64057616 Blue 14” Premium Welders, Carded Large 10.25
F. Premium Side Split Cowhide Welders Gloves with Double Reinforced Thumb
Premium side split cowhideDouble reinforced straight thumb adds strength where stress is most commonCotton lined for comfort and moisture absorptionDuPont™ Kevlar® sewn for added strength and heat resistance with fully welted fingers to protect stitching from burn and abrasionPull tab provides easy donning and extra protection when dragging a welding gunSold per pair or left hand only
Part Number Description Size PriceRAD64057636 Brown 14” Premium Welders, Carded Large 10.95 RAD64057638 Brown 14” Premium Welders, Left Hand Only Large 5.50
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
ead
ad
ace
Pro
tect
ion
eag
Pr
Pr
Pr
Pr
Pr
Prro
totototototoeceee
tion
esp
ato
yP
rote
ctio
n
INFORMATION FOR YOUR SAFETY
206
Welding GlovesA
D
B
C
A. Top Grain Elk Welders GlovesTop grain elk back and palm construction offer superior comfort and performanceElk molds to the shape of hands and stays softer under high heat conditionsNaturally resistant to oils and moisture, so it won’t crack or stiffen as quickly as cowhide14” Gloves feature cotton/foam lining on the back of the glove for added heat resistance and an unlined palm to maximize dexterityCuffs are stiff cowhide to avoid rolling down or bunching upFingers are welted and sewn with DuPont™ Kevlar® thread to protect seamsStraight thumb design is best for gripping and is reinforced for longer wearPull tab provides easy on/off and extra protection while dragging a welding gunAvailable in pearl or gold color
Part Number Description Size PriceTIL850S Gold 14” Elk Welders, Carded Small 22.25 TIL850M Gold 14” Elk Welders, Carded Medium 22.25 TIL850L Gold 14” Elk Welders, Carded Large 22.25 TIL850XL Gold 14” Elk Welders, Carded XLarge 22.25TIL750S Pearl 14” Elk Welders, Carded Small 19.95 TIL750M Pearl 14” Elk Welders, Carded Medium 19.95 TIL750L Pearl 14” Elk Welders, Carded Large 19.95 TIL750XL Pearl 14” Elk Welders, Carded XLarge 19.95
B. All Elk Welders GlovesGold top grain elk construction provides the ultimate in comfort and dexterityAll wool interior adds extra heat protectionWelted fingers, DuPont™ Kevlar® stitching and a straight thumb design provide durable comfort
Part Number Description Size PriceTIL945L Elk 14” Welders, Carded Large 35.00 TIL945XL Elk 14” Welders, Carded XLarge 35.00
C. Reverse Grain Pigskin Welders GlovesBrown reverse grain pigskin is soft on the hand with a rugged exterior surface that naturally resists oil and water for long-lasting durabilityWelted fingers and DuPont™ Kevlar® stitching protect seamsCotton/foam lining provides maximum absorption and heat protection
Part Number Description Size PriceTIL495L Pigskin 14” Welders, Carded Large 14.95 TIL495XL Pigskin 14” Welders, Carded XLarge 14.95
D. Top Grain Cowhide Welders GlovesTop grain cowhide version of the popular 750/850 offers rugged long lasting construction and protection14” Gloves feature cotton/foam lining on the back of the glove for added heat resistance and an unlined palm to maximize dexterityCuffs are stiff cowhide to avoid rolling down or bunching upGlove fingers are welted and sewn with DuPont™ Kevlar® thread to protect seamsStraight thumb design is best for gripping and is reinforced for longer wearPull tab provides easy on/off and extra protection while dragging a welding gun
Part Number Description Size PriceTIL650M Cowhide 14” Welders, Carded Medium 16.95 TIL650L Cowhide 14” Welders, Carded Large 16.95 TIL650XL Cowhide 14” Welders, Carded XLarge 16.95
Stick welding produces the most heat, sparks and spatter resulting in the need for gloves with more heat insulation. Since this process requires less dexterity it allows the user to wear gloves that are thicker and offer more heat protection.
Stick Welding
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
D
B
C
INFORMATION FOR YOUR SAFETY
TIG welding produces the lowest heat and the flame is concentrated to a certain area. The result is minimal sparks and spatter. The gloves needed for this application can be thinner top grain leathers to maximize feel and dexterity.
TIG Welding Gloves
aringection
Respiratory
Protectionn
Insttrururuume
me
me
mme
meeentntntntntntntntatatatatatatatioioioioioinnnn
Co
Co
Co
Co
Co
CCo
Cooonfinfinfinfinfifinfinennned d dS
pS
pacaacceeeeFall
and
Prot
ectionP
rotectiveWW
oW
oW
oWW
oW
oW
oW
orrkrkrkrkrkrkkwwwear
First Aid
Products
Spill CC
ontpp
D
207
MIG/TIG Welding GlovesA. Tillman™ Premium Top Grain Kidskin TIG Welders Gloves
Made from premium pearl top grain kidskinOffer superior feel, dexterity and wearability as they allow wire to pass smoothly against the leatherSewn with heat-resistant DuPont™ Kevlar® thread for tough durabilityStraight thumb design allows for optimum gripping
Part Number Description Size PriceTIL24DS Kidskin TIG Welders, 2” Cuff, Carded Small 12.95 TIL24DM Kidskin TIG Welders, 2” Cuff, Carded Medium 12.95 TIL24DL Kidskin TIG Welders, 2” Cuff, Carded Large 12.95 TIL24DXL Kidskin TIG Welders, 2” Cuff, Carded XLarge 12.95TIL24CS Kidskin TIG Welders, 4” Cuff, Carded Small 13.75 TIL24CM Kidskin TIG Welders, 4” Cuff, Carded Medium 13.75 TIL24CL Kidskin TIG Welders, 4” Cuff, Carded Large 13.75 TIL24CXL Kidskin TIG Welders, 4” Cuff, Carded XLarge 13.75
B. Tillman™ Premium Top Grain Kidskin Split Cowhide TIG Welders Gloves
Smooth pearl, top grain kidskin palm provides excellent feel, dexterity and wearabilityBrown cowhide split leather back keeps the cost down and enhances heat protectionDuPont™ Kevlar® stitching, for added durability, straight thumb design and 2” cuff length
Part Number Description Size PriceTIL20M Kidskin/Cowhide TIG Welders, Carded Medium 10.75 TIL20L Kidskin/Cowhide TIG Welders, Carded Large 10.75
C. Tillman™ Top Grain Goatskin TIG Welders GlovesMade from pearl top grain goatskinOffer excellent dexterity, seamless forefinger for enhanced feel and wing thumb design for comfortable all-around useSewn with DuPont™ Kevlar® thread for strength and heat resistance
Part Number Description Size PriceTIL1324M Wing Thumb TIG Welders, 2” Cuff, Carded Medium 8.95 TIL1324L Wing Thumb TIG Welders, 2” Cuff, Carded Large 8.95 TIL1324XL Wing Thumb TIG Welders, 2” Cuff, Carded XLarge 8.95TIL1328M Wing Thumb TIG Welders, 4” Cuff, Carded Medium 9.50 TIL1328L Wing Thumb TIG Welders, 4” Cuff, Carded Large 9.50 TIL1328XL Wing Thumb TIG Welders, 4” Cuff, Carded XLarge 9.50
D. Radnor® Premium Grain Goatskin MIG/TIG Welders GlovesPremium grain goatskin with 4” blue split leather gauntlet cuffSewn with DuPont™ Kevlar® thread for super-strong heat resistanceEnhanced dexterity and softness for less hand fatigueWing thumb
Part Number Description Size PriceRAD64056447 Goatskin MIG/TIG Welders Medium 10.12 RAD64056448 Goatskin MIG/TIG Welders Large 10.12 RAD64056449 Goatskin MIG/TIG Welders XLarge 10.67
E. Tillman™ Deerskin Split Leather TIG Welders GlovesDeerskin split leather gives these pearl TIG welders a snug and soft fit, resulting in the best feel and dexterity possibleHeat-resistant DuPont™ Kevlar® stitching and straight thumb design
Part Number Description Size PriceTIL25AS Deerskin TIG Welders, 2” Cuff, Carded Small 8.50 TIL25AM Deerskin TIG Welders, 2” Cuff, Carded Medium 8.50 TIL25AL Deerskin TIG Welders, 2” Cuff, Carded Large 8.50 TIL25AXL Deerskin TIG Welders, 2” Cuff, Carded XLarge 8.50TIL25BS Deerskin TIG Welders, 4” Cuff, Carded Small 9.25 TIL25BM Deerskin TIG Welders, 4” Cuff, Carded Medium 9.25 TIL25BL Deerskin TIG Welders, 4” Cuff, Carded Large 9.25 TIL25BXL Deerskin TIG Welders, 4” Cuff, Carded XLarge 9.25
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
Han
dP
rote
ctio
nP
rP
rPPP
otec
tive
oW
oW
oW
oW
oW
oW
oW
orkrkrkrkrkrkrkr
we
we
wwwwwar
Firs
t Aidd
Pro
dccccuc
tstststssststst& t
p Con
tain
ppS
uppl
ies
Sto
rage
208
See pages 30, 32 – 33 for a selection of Passive and Auto-Darkening Welding Helmets.
See pages 240 – 243 for a selection of leather and FR apparel.
MIG Welding Gloves
A
E
D
B
C
A. Top Grain/Split Cowhide Fleece Lined MIG Welders GlovesTop grain cowhide palm with split cowhide reinforcementsCowhide split back with elastic for best fitTop grain seamless index finger for best feelFleece lined for added insulation in hot or cold conditions without the bulk4” Cuff for added protectionSewn with DuPont™ Kevlar® thread for strength and heat resistance
Part Number Description Size PriceTIL50M Top Grain Cowhide Fleece Lined MIG Welders Medium 16.25 TIL50L Top Grain Cowhide Fleece Lined MIG Welders Large 16.25 TIL50XL Top Grain Cowhide Fleece Lined MIG Welders XLarge 16.25
B. Top Grain Goatskin/Cowhide Split Fleece Lined MIG Welders Gloves
Top grain goatskin palm for best feel, cowhide split back resists heatFleece lined for added heat protection without the bulkStraight thumb for best gun gripThumb strap reinforcement for extra strengthElastic back for snug fit31⁄2” Cuff for added protectionDuPont™ Kevlar® stitching protects seams
Part Number Description Size PriceTIL48M Top Grain Goatskin Fleece Lined MIG Welders Medium 13.25 TIL48L Top Grain Goatskin Fleece Lined MIG Welders Large 13.25 TIL48XL Top Grain Goatskin Fleece Lined MIG Welders XLarge 13.25
C. Top Grain Pigskin Insulated MIG Welders GlovesExtremely durable top grain pigskin offers natural resistance to wet and oily conditionsPalm is unlined for enhanced feel, back of glove is foam lined for added heat protectionSewn with DuPont™ Kevlar® thread for added durability and includes thumb strap reinforcement4” Gauntlet cuff offers added protection
Part Number Description Size PriceTIL42M Pigskin Insulated MIG Welders, Carded Medium 12.75 TIL42L Pigskin Insulated MIG Welders, Carded Large 12.75
D. Heavyweight Top Grain Pigskin MIG Welders GlovesSoft but extremely durable heavyweight top grain pigskin MIG welders for excellent protection in wet and oily welding conditionsExtra strong seams are sewn with DuPont™ Kevlar® thread with maximum number of stitches per inchStraight thumb provides the best gun grip and 4” cuff length adds protectionUnlined for enhanced dexterity
Part Number Description Size PriceTIL32S Pigskin MIG Welders, Carded Small 11.75 TIL32M Pigskin MIG Welders, Carded Medium 11.75 TIL32L Pigskin MIG Welders, Carded Large 11.75 TIL32XL Pigskin MIG Welders, Carded XLarge 11.75
E. Top Grain Deerskin Insulated MIG Welders GlovesHeavyweight gold reverse grain deerskin, (smooth grain surface on the inside of the glove)Extremely comfortable and supple with the extra thickness offering exceptional heat protection and durabilityPalm is unlined for enhanced feel, back of glove is foam lined for added heat protectionSewn with DuPont™ Kevlar® thread for added durability and includes thumb strap reinforcement4” Gauntlet cuff offers added protection
Part Number Description Size PriceTIL35M Deerskin MIG Welders Medium 14.95 TIL35L Deerskin MIG Welders Large 14.95
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
INFORMATION FOR YOUR SAFETY
MIG Welding is the most popular weld for a broad range of applications. The heat levels are less than in Stick Welding and the user operates a welding gun with a trigger requiring more dexterity. MIG gloves tend to be lighter weight than Stick gloves, yet are made with thicker leather than TIG gloves. This provides a balance between protection and durability, but still offers the needed dexterity for trigger and gun operation.
MIG Welding Gloves
209
MIG Welding Gloves
A
E
D
B
C
A. Tillman™ Heavyweight Top Grain Cowhide MIG Welders GlovesHeavy-duty top grain cowhide MIG welders, excellent all around handlingWing thumb design and seamless forefinger for enhanced feelDuPont™ Kevlar® stitching and 4” split leather cowhide cuff offer added protection
Part Number Description Size PriceTIL1350S Top Grain Cowhide MIG Welders, Carded Small 11.95 TIL1350M Top Grain Cowhide MIG Welders, Carded Medium 11.95 TIL1350L Top Grain Cowhide MIG Welders, Carded Large 11.95 TIL1350XL Top Grain Cowhide MIG Welders, Carded XLarge 11.95
B. Tillman™ Brown Split Cowhide MIG Welders GlovesDesigned with thicker leather to provide protection and durability for MIG weldingConstructed from economic brown split cowhideDuPont™ Kevlar® stitching, a seamless forefinger for enhanced feel, straight thumb and 2” cuffUnlined for enhanced dexterity
Part Number Description Size PriceTIL1300M Split Cowhide MIG Welders Medium 5.75 TIL1300 Split Cowhide MIG Welders Large 5.75
C. Radnor® Grain Cowhide MIG Welders Gloves Grain cowhide MIG gloves are sewn with DuPont™ Kevlar® for enhanced strength and heat resistanceGray 4” split leather cowhide cuff Clute pattern and reinforced thumb strapGloves provide excellent fit and dexterity
Part Number Description Size PriceRAD64057862 Grain Cowhide MIG Welders, Gray Large 10.10 RAD64057863 Grain Cowhide MIG Welders, Gray XLarge 10.10
D. Radnor® Grain Cowhide MIG Welders Gloves Grain cowhide weldersSewn with strong heat-resistant DuPont™ Kevlar® thread4” russet split leather cowhide cuffGunn construction and wing thumbGloves provide excellent fit and dexterity
Part Number Description Size PriceRAD64057864 Grain Cowhide MIG Welders, Russet Medium 8.77 RAD64057865 Grain Cowhide MIG Welders, Russet Large 8.77 RAD64057866 Grain Cowhide MIG Welders, Russet XLarge 9.20
E. Radnor® Premium Grain Pigskin MIG Welders GlovesPremium grade grain MIG gloves with wing thumb All seams are double lock stitched and sewn with DuPont™ Kevlar®
41⁄2” Split leather cowhide gauntlet offers additional protection to forearmPart Number Description Size PriceRAD64056458 Pigskin MIG/TIG Welders Large 7.39
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
INFORMATION FOR YOUR SAFETY
210
Hand Protection Information
DuPont™ Kevlar® Heat Range
Glove Weight Approximate Protection*
Heavyweight, Terry Lined Up to 750˚FNon-Loop Shell, Double Wool Lined
Heavyweight Terry, Wool Lined Up to 900˚F
* The degree of heat resistance a glove may offer is directly related to the duration of exposure and weight of the object being handled.
Terry Heat Range
Glove Weight Approximate Protection*
Extra Heavyweight 250˚ – 350˚F
Extra Heavyweight Terry Lined Extra Heavyweight , Flame Retardant 350˚ – 450˚FDouble Layered Terry
* The degree of heat resistance a glove may offer is directly related to the duration of exposure and weight of the object being handled.
Decomposition of Thermal Materials
Material FahrenheitCotton 300˚ – 450˚FPolymers 400˚ – 500˚FNylon (6-6) 400˚ – 500˚FDuPont™ Kevlar® 800˚ – 900˚F
DuPont™ Kevlar® FactsDuPont™ Kevlar® provides strength, cut resistance and heat resistance. Pound for pound, it is five times stronger than steel, and five times more cut-resistant than leather. DuPont™ Kevlar® will not burn or melt. It can protect against temperatures up to 900°F with a lining, depending on the weight and duration of objects being handled. See the chart at the right. DuPont™ Kevlar® also offers low electrical conductivity and low thermal shrinkage.
Terry Cloth FactsThe loop structure of 100% terry cloth provides excellent heat and cut protection. An insulting layer of air forms beneath each loop, allowing the glove to dissipate heat quickly. The loops create an insulting barrier between the hot object and the wearer, making it ideal for hot pans, trays, instruments and ovens. The high loop structure causes sharp edges to roll from one surface to the next without incision, protecting the hand and extending glove life. Flexible and durable, terry cloth stands up to repeated laundering with minimal shrinkage.
DuPont™ Kevlar® and terry cloth offer superior high-heat hand protection, and are available in a variety of lined and unlined, glove and mitt styles. DuPont™ Kevlar® is inherently flame resistant and self-extinguishing. It starts to carbonize at 900°F, and won’t melt or drip. Terry cloth is a natural insulator, offering the most effective protection from 200°F to 450°F. It offers economical yet excellent cut, heat and abrasion protection.
What the Pictograph Means . . .A CE Mark assures that the products are compliant to the requirements of health and security as detailed by the European Committee of Standardization. EN407 specifies test methods, general requirements, thermal performance levels and the marking of protective gloves against heat and/or fire. The series of numbers to the bottom right of a pictograph (six for EN407) represents a score to help you understand the products application and limitations as detailed in the testing procedures below.
EN407 Tests Level of Performance 1 2 3 4
Resistance to burning: Time during which the material keeps burning Time in seconds <20 <10 <3 <2and consuming itself after the ignition source has been removed.
Resistance to contact heat: Temperature (in the range 100°C to 500°C) Time at 15 seconds (if >) 100°C 250°C 350°C 500°Cat which the average person wears the glove and does not feelany pain (for a period at least equal to 15 seconds).
Resistance to convective heat: Time for the temperature to rise (75+3)°F. Time in seconds >4 >7 >10 >18
Resistance to radiant heat: Time to reach a heat flux of 2.5kW/m2 Time in seconds >5 >30 >90 >150 on the back of the specimen.Resistance to small drops of molten metal: Quantity of drops to Number of droplets >5 >15 >25 >35raise the temperature by 104°F.
Resistance to molten metal splash: Quantity of molten metal just Weight in grams >30 >60 >120 >200below the threshold of causing damage to artificial skin.
Burning BehaviorContact HeatConvective HeatRadiant HeatSmall Splashes of Molten MetalLarge Splashes of Molten Metal
XXXXXX
High-Heat Gloves
MEG9400KM MEG9402KM
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
C
D
B
Pro
tion
E
211
High Heat Gloves and PadsA. Jomac® Extra Heavyweight Terry Cloth Pads
Terry cloth pads with thumb are made of extra heavyweight terry cloth for superior cut and abrasion resistanceOpen topProtects to 325˚FFull thumb, ambidextrousSold individually
Part Number Description Size PriceWLAH-160 Terry Cloth Pad with Open Top 61⁄2” 1.70 WLAH-183 Terry Cloth Pad with Open Top 10” 2.19
B. Jomac® Terry Cloth Bakers PadsExtra heavyweight terry cloth bakers pads can protect for heat up to 460°FHand hole permits wearing around the wrist to ensure that workers have hand protection available at all timesPad with elastic strap is worn around wrist and stays secure to the handPad allows the hand to be free for other jobs when the pad is not in useSold individually
Part Number Description PriceWLAB-PAD Terry Cloth Bakers Pad with Hand Hole 2.34 WLAG-PAD Terry Cloth Bakers Pad with Elastic Strap 2.74
C. Best® CharGuard® GlovesA proprietary textured coating gives gloves heat resistance from intermittent contact up to 500°F, no-slip grip and excellent abrasion resistanceComfortable non-woven liner provides flexibility and fitBlack gloves don’t show dirt or charring and can withstand multiple washings while maintaining superior tactile dexterityIdeal for food processing and service Not liquid-proof
Meet OSHA 21 CFR, part 170-199 StandardsSold per pair
Part Number Description Size PriceB138814-07 14” CharGuard® Small 13.21 B138814-08 14” CharGuard® Medium 13.21 B138814-09 14” CharGuard® Large 13.21 B138814-10 14” CharGuard® Medium 13.21
D. Ansell Crusader® Flex GlovesFor long wearing protection in moderate heat applicationsNon-woven felt insulation and full-length heat barrierBonded nitrile coating enhances grip and protects against snags, punctures, abrasions and cutsProtect hands in temperatures up to 400˚F. Used in intermittent handling of hot cores, castings and controlsSold per pair
Part Number Description Size PriceANE42-325-9 10” Crusader® Flex 9 9.42 ANE42-325-10 10” Crusader® Flex 10 9.42
E. Memphis 18 oz. Terry Cloth GlovesNatural regularweight 18 oz. terry cloth70% Cotton – 30% PolyReversible, seamless patternKnitwrist
Part Number Description Size PriceMEG9400KM 18 oz Terry Cloth Men’s Large 1.19 MEG9402KM 18 oz Terry Cloth Ladies Small 1.17
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
E
D
C
A
B
212
High Heat Gloves
A. Jomac® DuPont™ Kevlar®/Cotton Terry Cloth GlovesProtect up to 200°FDuPont™ Kevlar®/cotton blend terry cloth KnitwristLoop-out Ambidextrous
Part Number Description Size PriceWLA9000 Kevlar®/Cotton Terry Cloth Large 4.47
B. Jomac® Standardweight 100% Cotton GlovesProtect up to 300°FWhite loop-out terry clothKnitwristAmbidextrous
Part Number Description Size PriceWLA1666 White Standardweight 100% Cotton Men’s 2.32
C. Jomac® Standardweight Poly/Cotton GlovesProtect up to 225°FGray loop-out terry clothKnitwristAmbidextrous
Part Number Description Size PriceWLA1564 Gray Standardweight 100% Cotton Men’s 1.85
D. Jomac® Cut & Sewn Heavyweight GlovesProtect up to 325°FWhite loop-out terry clothKnitwristAmbidextrous
Part Number Description Size PriceWLA765 White Cut & Sewn Heavyweight Medium 3.23 WLA766 White Cut & Sewn Heavyweight Large 3.23
E. Jomac® Extra Heavyweight Brown and White Terry Cloth GlovesExtra heavyweight loop-out terry clothHeat protection up to 350°F for unlinedHeat protection up to 450°F for linedAmbidextrousAvailable with 2.5” safety cuff or 5” gauntlet cuff for extra coverage
Part Number Description Size PriceWLA644HR Brown & White Terry Cloth Unlined, Safety Cuff XLarge 7.81 WLA636HR Brown & White Terry Cloth Unlined, Gauntlet Cuff XLarge 8.92WLA644HRL Brown & White Terry Cloth Lined, Safety Cuff XLarge 12.57 WLA636HRL Brown & White Terry Cloth Lined, Gauntlet Cuff XLarge 14.02
WLA644HRL
WLA636HR
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
N A T I O N A L S A F E T Y A P P A R E L®
A
F
ED
B C
G
213
High Heat Gloves
A. Wool-Lined DuPont™ Kevlar® Terry GlovesHeavyweight DuPont™ Kevlar® terry protects hands from moderate heat12” Gloves have a 22 oz. Dupont™ Kevlar® terry outer shell with a special heavy reverse wool lining
Part Number Description Size PriceN33G43KTSR12F Wool Lined DuPont™ Kevlar® XLarge 53.30
B. Reversed DuPont™ Kevlar® Terry GlovesConstructed of 100% DuPont™ Kevlar® loop-in terrycloth with a reversed wool lining and DuPont™ Kevlar® cuff12”, 22 oz. Gloves can be worn on either hand for extended wear lifeSuperior abrasion resistance, and offer good dexterityFlame resistant brown duck cuff for cost savingsMachine washable (no bleach)
Part Number Description Size PriceN33G44RTRW12 DuPont™ Kevlar® Terry Cuff Medium 42.60 N33G43RTRW12 DuPont™ Kevlar® Terry Cuff Large 49.06 N33G45RTRW12 DuPont™ Kevlar®Terry Cuff XLarge 50.94N33G44RTRW12010 DuPont™ Kevlar® Terry Brown Duck Cuff Medium 40.12 N33G43RTRW12010 DuPont™ Kevlar® Terry Brown Duck Cuff Large 39.30 N33G45RTRW12010 DuPont™ Kevlar® Terry Brown Duck Cuff XLarge 41.50
C. Thermobest™ Heat Gloves and MittsThermobest™ 22 oz. heat gloves and mitts are constructed of a Dupont™ Kevlar® blend materialReversed wool liner (12 oz. in the glove, 15 oz. in the mitt) for added comfortOffer good abrasion resistance and moderate heat resistanceGlove has a Goldenbest™ cuffBoth glove and mitt measure 14” in lengthMitt is fully reversible to extend the life
Part Number Description Size PriceN33G51TCGH14072 Thermobest™ Glove Large 42.26 N33M11TCRH14 Thermobest™ Mitt Large 36.79
D. Leather with Aluminized Carbon DuPont™ Kevlar® Back GlovesMaximum molten metal splash protection for back of hand, this premium leather glove is backed with 18 oz. aluminized carbon Dupont™ Kevlar®
Aluminized leather forefinger and thumb patches provide extra protection in heavy-wear areasProtect against radiant heat13” Wool-lined glove also features a leather crotch strap
Part Number Description Size PriceN33DJXGSP382 Aluminized Carbon DuPont™ Kevlar® Back Large 59.25
E. Thermobest™ with Aluminized Carbon DuPont™ Kevlar® Back Gloves
Thermobest™ 22 oz. Dupont™ Kevlar® blend with a 13 oz. aluminized Norbest™ back to protect against radiant heat and molten metal splashSpecial heavy 15 oz. reversed Fonda wool lining for comfort14” Length with a wing thumb
Part Number Description Size PriceN33G64TCSR1401 Thermobest™ Aluminized Norbest™ Back Large 67.93
F. PBI®/DuPont™ Kevlar® Gloves and Mitts22 oz. Glove is a PBI®/Dupont™ Kevlar® blend with a reversed wool liningHighly durable 45 oz. glove and mitt have the heaviest PBI®/Dupont™ Kevlar® blend available with a wool lining and can be used in extreme temperatures Protection for high heat applicationsAll have a 22 oz. Thermobest™ cuff, a 22 oz. PBI®/Dupont™ Kevlar®cuff patch and are 14” long
Part Number Description Size PriceN33G51PBRW14137 22 oz PBI®/DuPont™ Kevlar® Glove Large 84.34 N33G51PCLW14137 45 oz PBI®/DuPont™ Kevlar® Glove Large 138.68 N33M52PCLW14002 45 oz PBI®/DuPont™ Kevlar® Mitt Large 111.32
G. Zetex Plus® Mitt14” Reversible multi-layered 40 oz. quilted mitt Reversed wool lining for comfortDuPont™ Kevlar® palm patch on inside shell, Zetex® patch on outside shellThumb and palm feature wool quilting between layers of Zetex Plus™, a highly durable, spark and molten splash-resistant material for superior heat resistance
Part Number Description Size PriceN33M60ZPRH14010 Zetex Plus® Mitt Large 77.83
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
214
High Heat Gloves and Hand Pads
D
B
C
TIL550
TIL554
TIL550X
Firs
t Ai
Pro
duct
Spi
ll C
ontr
ol l &&&
Con
tain
mnmmmmmnmenenenennenenee
ttttttpp
Faci
lity
uppl
ies
TIL550X
A
A. Aluminized Welding Gloves 820L has an aluminized rayon back designed to reflect heat (but will NOT resist spatter) up to 1,500°F822L has an aluminized carbon DuPont™ Kevlar® back designed to reflect heat and resist spatter up to 1,500°FBoth gloves are constructed with a cowhide palm, reinforced thumb and are wool lined14” LengthSold per pair
Part Number Description PriceTIL820L Aluminized Rayon Back and Cowhide Palm 26.25 TIL822L Aluminized Carbon DuPont™ Kevlar® Back and Cowhide Palm 35.00
B. Aluminized Welding Gloves with Snap-On Back Hand PadGloves have aluminized rayon back to reflect extreme heat and has cowhide palm for durabilityReplaceable aluminized carbon DuPont™ Kevlar®—black vermiculite coated fiberglass snap-on back-hand pad for high heat and heavy spatter protection14” LengthReplacement ACK back-hand pad also availableGloves sold per pair
Part Number Description Size PriceTIL820BHP Aluminized Rayon Palm with Cowhide Back Large 47.00 TIL558 Replacement ACK Back-Hand Pad 7.50
C. Welding Back Hand Pads550 Hand Pad—Standard Double Layer Protection
Aluminized Carbon DuPont™ Kevlar® topVermiculite coated fiberglass bottomLeather and elastic straps71⁄2”H x 51⁄2”W
550X Hand Pad—Economy Double Layer ProtectionAluminized Rayon topAcrylic coated fiberglass bottomLeather and elastic straps71⁄2”H x 51⁄2”W
554 Hand Pad—Heavy-Duty Triple Layer ProtectionAluminized Carbon DuPont™ Kevlar® topLayer of 1500°F melt, ceramic wool material in the middleAcrylic coated fiberglass bottomLeather and elastic straps71⁄2”H x 51⁄2”W
Part Number Description PriceTIL550 Standard Double Layer Welding Back Hand Pad 5.92 TIL550X Economy Double Layer Welding Back Hand Pad 4.50 TIL554 Heavy-Duty Triple Layer Welding Back Hand Pad 7.50
D. 22 oz. Flextra® High Heat Gloves22 oz. Flextra® palm and back with 24 oz. gold acrylic coated fiberglass cuffDouble wool lined in palm Sewn with DuPont™ Kevlar® threadMaximum temperature range of 600°F up to 1,000°F for short durations14” LengthSold per pair
Part Number Description Size PriceTIL990XL 22 oz Flextra® High Heat XLarge 41.00
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
B
C
A
W43E011BW43E0011B
B W43ILP10
W43ILP3S
W43GB112
eadd aaaaandnddndndndd F F FFFFFFaaacacaace P
rP
rrrrototoootototteecececttitiononnnH
earingP
rotectionR
espiratoryP
rotection
W43E214RB
Insulating Rubber Gloves Maximum Usage Proof Test Max. Use Class Voltage Voltage AC/DC AC/DC 00 2500/10,0000 500/750 0 5,000/20,000 1,000/1,500 1 10,000/40,000 7,500/11,250 2 20,000/50,000 17,000/25,500 3 30,000/60,000 26,500/39,750 4 40,000/70,000 36,000/54,000
ntrol l &&&&&&&&m
eeennnnnnttttFFaFaFaFaccicicilililitytyty
Su
Su
Su
SSpppppppplilililililieseseseses
Flamm
ableS
torage
C. Glove BagsConstructed of heavy-duty canvas duck and are double stitched and riveted at stress points for extra durabilityCanvas bags feature a D-ring for hanging on work beltsBags feature tapered gussets with wide opening tops for easy insertion
Part Number Description PriceW43GB112 12” Canvas Bag for Gloves 22.36 W43GB114 14” Canvas Bag for Gloves 24.17
D. Glove Inflator Kit
Simple, easy to use, portable glove inflatorProvides a quality means of inspecting gloves in the fieldGlove is secured to the inflator using a nylon strap and fastened with hook and pile, or a rubber o-ringInflation is accomplished by pumping the bellows of the inflator
Part Number Description PriceW43G99 Glove Inflator Kit 184.59
Leather Protector Clearance Table Glove Min. Distance Between Class Top of Protectors and Rubber Gloves in. mm 00,0 1⁄2 13 2 2 51 WARNING: Do not use leather protectors alone for protection against electric shock. Serious injury or death will result. Always use proper insulating rubber gloves.
215
Linemen’s Gloves and Accessories
D
A. Electrical Insulating Rubber GlovesLow voltage Made from red or black Type 1 natural rubberGloves meet or exceed ASTM D120 and IEC EN60903 Standards**Class 2 gloves are made from a contrasting two-color combination Type 1 natural rubber to make inspecting for cuts and tears easier when the glove is inflated or stretchedAvailable in whole (8 – 12) and half sizes (8H – 10H)—specify size when ordering
Part Number Description Color Size PriceW43E0011R 11” Class 00, Type 1 Red 8-12 44.94 W43E0011B 11” Class 00, Type 1 Black 8-12 44.94W43E011R 11” Class 0, Type 1 Red 8-12 48.33 W43E011B 11” Class 0, Type 1 Black 8-12 48.33W43E214RB 14”, **Class 2, Type 1 Red In/Black Out 8-12 129.60
Salisbury recommends an alternating glove color program to assure all gloves are in the proper test cycle per OSHA and ASTM requirements. This program creates a visual reminder of the test cycle period by using one glove color for the first test period and a different color for the following test period. Continue alternating these two colors when a new test period begins. For example: Red Class 00 gloves are worn for first test cycle period, then black Class 00 gloves are worn during the second test cycle period.
We take your safety seriously.
B. Leather Protector GlovesLeather protector gloves should always be worn over Insulating Rubber Gloves to provide the needed mechanical protection against cuts, abrasions and puncturesILP Series is manufactured from top grain cowhideILP10 gloves do not have a cuff
Part Number Description Size PriceW43ILP3S 12” Cowhide for use with Rubber Insulating Gloves 8-12 19.69 W43ILP10 10” Cowhide for use with Rubber Insulating Gloves 8-12 17.65
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
N A T I O N A L S A F E T Y A P P A R E L®HH
eari
ngP
rote
ctio
nR
espi
rato
ryP
rote
ctio
nIn
stru
meen
tntnat
ion
Con
fieeeeeene
dddddd ddddddddpp
Sp
Sp
Sp
Sp
Sp
Sp
Sp
Sp
SSSSSSSacacacacaccacacacccaa
eeeeeeeeee
N A T I O N A L S A F E T Y A P P A R E L®
216
INFORMATION FOR YOUR SAFETY
Cryogenic Gloves and Aprons
A
B
Protection for Ultra Cold Environments
Waterproof GlovesFor applications where splash protection is needed, these gloves provide additional protection without sacrificing breathabilityThin, seamless, 100% waterproof layer is added to give additional protection against liquids without added bulk or loss of dexterity*Tested to EN511 as well as IFTH reference method for immersion in liquid nitrogen-ZL0102
Part Number Description Size PriceN33G99CRBEWRMDP Waterproof Wrist Length 12” Medium 171.42 N33G99CRBEWRLGP Waterproof Wrist Length 12” Large 171.42 N33G99CRBEWRXLP Waterproof Wrist Length 12” XLarge 171.42N33G99CRBEMAMDP Waterproof Mid-Arm Length 14” – 15” Medium 166.04 N33G99CRBEMALGP Waterproof Mid-Arm Length 14” – 15” Large 166.04 N33G99CRBEMAXLP Waterproof Mid-Arm Length 14” – 15” XLarge 166.04N33G99CRBEELMDP Waterproof Elbow Length 17” – 18” Medium 198.11 N33G99CRBEELLGP Waterproof Elbow Length 17” – 18” Large 198.11 N33G99CRBEELXLP Waterproof Elbow Length 17” – 18” XLarge 198.11N33G99CRBESHMDP Waterproof Shoulder Length 26” – 27” Medium 228.30 N33G99CRBESHLGP Waterproof Shoulder Length 26” – 27” Large 228.30 N33G99CRBESHXLP Waterproof Shoulder Length 26” – 27” XLarge 228.30
Waterproof SaferGrip™ GlovesSame protection as the waterproof gloves, plus a specially designed SaferGrip™ silicone-coated material in the palm for enhanced grip and durability*Tested to EN511 as well as IFTH reference method for immersion in liquid nitrogen-ZL0102
Part Number Description Size PriceN33G99CRSGMASMP SaferGrip™ Mid-Arm Length 15” Small 212.27 N33G99CRSGMAMDP SaferGrip™ Mid-Arm Length 15” Medium 212.27 N33G99CRSGMALGP SaferGrip™ Mid-Arm Length 15” Large 212.27 N33G99CRSGMAXLP SaferGrip™ Mid-Arm Length 15” XLarge 212.27
*EN511 (European Standard for Protective Gloves Against Cold)
A. Cryogen Safety GlovesDesigned to provide hand and arm protection against cryogenic liquids and other ultra-cold environmentsIdeal for use in research laboratories, frozen food processing, aerospace, welding supply companies and for the handling of dry iceGloves are not for immersion in cryogenic liquids
Sold per pair
Water-Resistant GlovesUsed where the protection is to be mainly against cold as opposed to protection against splashing of liquids.Gloves maintain their warmth and flexibility even in ultra-cold environments*Tested to EN511
Part Number Description Size PriceN33G99CRBEWRMDR Water-Resistant Wrist Length 12” Medium 117.36 N33G99CRBEWRLGR Water-Resistant Wrist Length 12” Large 117.36 N33G99CRBEWRXLR Water-Resistant Wrist Length 12” XLarge 117.36N33G99CRBEMAMDR Water-Resistant Mid-Arm Length 14” – 15” Medium 125.57 N33G99CRBEMALGR Water-Resistant Mid-Arm Length 14” – 15” Large 125.57 N33G99CRBEMAXLR Water-Resistant Mid-Arm Length 14” – 15” XLarge 125.57N33G99CRBEELMDR Water-Resistant Elbow Length 17” – 18” Medium 156.32 N33G99CRBEELLGR Water-Resistant Elbow Length 17” – 18” Large 156.32 N33G99CRBEELXLR Water-Resistant Elbow Length 17” – 18” XLarge 156.32N33G99CRBESHMDR Water-Resistant Shoulder Length 26” – 27” Medium 201.23 N33G99CRBESHLGR Water-Resistant Shoulder Length 26” – 27” Large 201.23 N33G99CRBESHXLR Water-Resistant Shoulder Length 26” – 27” XLarge 201.23
B. Cryogen Safety ApronsMade with the same waterproof materials as the Cryogen Safety GlovesProvides full frontal splash protection Adjustable at the neck and waistAprons are 24” wide at their widest point and are available in four lengthsNot for immersion in cryogenic liquids
Sold per eachPart Number Description Size PriceN33A02CR24I36IC Cryogen Apron 36” Length 145.00 N33A02CR24I42IC Cryogen Apron 42” Length 162.27 N33A02CR24I48IC Cryogen Apron 48” Length 177.64 N33A02CR24I54IC Cryogen Apron 54” Length 199.06
Guidelines for Safe Dry Ice Use:The temperature of dry ice is -109°F, cold enough to freeze skin cells and cause an injury similar to a burn. Always handle dry ice with protective clothing and gloves.
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
217
Cold Weather Leather Palm Work GlovesA
E
D
B
C
Knitwrist Back Knitwrist Inside
Knitwrist Back Knitwrist Inside
3M™ Thinsulate™ Insulation
Fleece Lining
Pile
A. Radnor® Lined Leather Palm Work GlovesSelect from fleece lined, pile lined, or gloves with 3M™ Thinsulate™ InsulationStriped canvas back with reinforced leather knuckle strap, fingertips and pull tab for easy on and offWing thumb
Part Number Description Size PriceRAD64057856 Economy Leather Palm, Fleece Lined Large 3.71 RAD64057857 Premium Select Shoulder Leather Palm, Fleece Lined Large 3.88RAD64057956 Select Shoulder Leather Palm, Pile Lined Large 4.86 RAD64057957 Select Shoulder Leather Palm, Pile Lined XLarge 5.10RAD64057500 Select Shoulder Leather Palm, 100 Gram 3M™ Thinsulate™ Insulation Large 6.41 RAD64057860 Select Shoulder Leather Palm, 100 Gram 3M™ Thinsulate™ Insulation XLarge 6.73
B. Radnor® Premium Grain Pigskin Leather Palm Gloves Lined with 3M™ Thinsulate™ Insulation
Striped canvas back with reinforced leather knuckle strap, fingertips and pull tab for easy on and offWing thumbAvailable with rubberized safety cuff or knitwrist to trap in heat
Part Number Description Size Price RAD64057085 Grain Pigskin, 100 Gram 3M™ Thinsulate™ Insulation, Knitwrist Large 7.86 RAD64057952 Grain Pigskin, 100 Gram 3M™ Thinsulate™ Insulation, Safety Cuff Large 8.02 RAD64057953 Grain Pigskin, 100 Gram 3M™ Thinsulate™ Insulation, Safety Cuff XLarge 8.41
C. Radnor® Premium Hi-Viz Grain Pigskin Leather Palm Gloves Lined with 3M™ Thinsulate™ Insulation
Provide excellent visibility in darkness and low-light conditionsFluorescent orange back with fluorescent green accents and 3M™ Scotchlite™ reflective material across the knuckles and safety cuffWing thumb design with leather index finger, fingertips and pull tab for easy on and offAvailable with rubberized safety cuff or knitwrist to trap in heat
Part Number Description Size PriceRAD64057040 Hi-Viz Grain Pigskin, 100 Gram 3M™ Thinsulate™ Insulation, Knitwrist Large 9.18 RAD64057041 Hi-Viz Grain Pigskin, 100 Gram 3M™ Thinsulate™ Insulation, Knitwrist XLarge 9.63 RAD64057032 Hi-Viz Grain Pigskin, 100 Gram 3M™ Thinsulate™ Insulation, Safety Cuff Large 10.51 RAD64057033 Hi-Viz Grain Pigskin, 100 Gram 3M™ Thinsulate™ Insulation, Safety Cuff XLarge 11.04
D. Radnor® Leather Palm Work Gloves with 3M™ Thinsulate™ Insulation and Waterproof Liner
Premium select shoulder leather palm glove are lined with 3M™ Thinsulate™ Insulation for added warmth and have a waterproof barrier to keep hands dryHeavy yellow canvas back with matching rubberized safety cuff enhance visibilityWing thumb design with leather index finger, fingertips and pull tab for easy on and off
Part Number Description Size Price RAD64057086 Premium Select Shoulder Leather Palm, 100 Gram 3M™ Large 7.88 Thinsulate™ Insulation and Waterproof Liner, Blue/YellowRAD64057092 Premium Select Shoulder Leather Palm, 100 Gram 3M™ Large 7.88 Thinsulate™ Insulation and Waterproof Liner, Black/Yellow3M, Scotchlite and Thinsulate are trademarks of 3M
E. Honeywell® Polar® Insulated Cold Weather Gloves3M™ Thinsulate™ Insulation, as well as a long knitwrist sewn into the safety cuffFull leather index finger, knuckle strap, leather fingertips and a leather pull patchWing thumb, gunn cut pattern for wearer comfortKeep workers’ hands warm and comfortable in cold applicationsWaterproof vinyl liner prevents hands from getting wetGreat for construction, cold storage work and packing plants
Part Number Description PriceNOS70/6465NK Men’s Polar®, Blue Leather/Yellow Back 19.77
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
218
Cold Weather Drivers Gloves
A
D
B
C
INFORMATION FOR YOUR SAFETY
3M™ Thinsulate™ Insulation
Fleece Lining
Pile
water-repellent (not waterproof) fabric. Take special care to protect your head, hands and feet. Watch for exposed skin, such as the neck or where your glove meets the sleeve.
to thermal injury.
Cold Weather Exposure
A. Lined Split Cowhide Drivers GlovesLined split cowhide leather drivers are cost effectiveSelect from fleece lined, pile lined, or gloves with 3M™ Thinsulate™ InsulationKeystone thumbShirred elastic back and slip-on cuff with color coded hem for size identification
Part Number Description Size PriceRAD64057438 Split Cowhide Drivers, Fleece Lined Small 4.90 RAD64057439 Split Cowhide Drivers, Fleece Lined Medium 4.90 RAD64057440 Split Cowhide Drivers, Fleece Lined Large 4.90 RAD64057441 Split Cowhide Drivers, Fleece Lined XLarge 5.16RAD64057461 Split Cowhide Drivers, Pile Lined Large 5.63 RAD64057462 Split Cowhide Drivers, Pile Lined XLarge 5.90RAD64057456 Split Cowhide Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Large 7.29 RAD64057457 Split Cowhide Drivers, 3M™ Thinsulate™ Insulation, 100 Grams XLarge 7.67
B. Lined Grain Cowhide Drivers GlovesLined grain cowhide drivers are durable and keep hands warmSelect from fleece lined, pile lined, or gloves with 3M™ Thinsulate™ InsulationKeystone thumbShirred elastic back and slip-on cuff with color coded hem for size identification
Part Number Description Size PriceRAD64057412 Grain Cowhide Drivers, Fleece Lined Small 8.84 RAD64057413 Grain Cowhide Drivers, Fleece Lined Medium 8.84 RAD64057414 Grain Cowhide Drivers, Fleece Lined Large 8.84 RAD64057415 Grain Cowhide Drivers, Fleece Lined XLarge 9.29RAD64057418 Grain Cowhide Drivers, Pile Lined Small 9.59 RAD64057419 Grain Cowhide Drivers, Pile Lined Medium 9.59 RAD64057420 Grain Cowhide Drivers, Pile Lined Large 9.59 RAD64057421 Grain Cowhide Drivers, Pile Lined XLarge 10.06RAD64057424 Grain Cowhide Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Small 10.00 RAD64057425 Grain Cowhide Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Medium 10.00 RAD64057426 Grain Cowhide Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Large 10.00 RAD64057427 Grain Cowhide Drivers, 3M™ Thinsulate™ Insulation, 100 Grams XLarge 10.51
C. Lined Premium Grain Pigskin Drivers GlovesLined premium grain pigskin leather drivers are extremely breathable and resist moistureSelect from fleece lined or gloves with 3M™ Thinsulate™ InsulationKeystone thumbShirred elastic back and slip-on cuff with color-coded hem for size identification
Part Number Description Size PriceRAD64057473 Grain Pigskin Drivers, Fleece Lined Small 8.06 RAD64057474 Grain Pigskin Drivers, Fleece Lined Medium 8.06 RAD64057475 Grain Pigskin Drivers, Fleece Lined Large 8.06 RAD64057476 Grain Pigskin Drivers, Fleece Lined XLarge 8.47RAD64057478 Grain Pigskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Small 8.78 RAD64057479 Grain Pigskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Medium 8.78 RAD64057480 Grain Pigskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Large 8.78 RAD64057481 Grain Pigskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams XLarge 9.22
D. Premium Grain Deerskin Drivers Gloves with 3M™
Thinsulate™ InsulationLined premium grain deerskin leather drivers are super soft and have the best insulating abilityLined with 100 grams of 3M™ Thinsulate™ Insulation for added warmth and moisture absorptionKeystone thumb with shirred elastic back, slip-on cuff and double stitched hem
Part Number Description Size PriceRAD64057449 Grain Deerskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Small 18.57 RAD64057450 Grain Deerskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Medium 18.57 RAD64057451 Grain Deerskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams Large 18.57 RAD64057452 Grain Deerskin Drivers, 3M™ Thinsulate™ Insulation, 100 Grams XLarge 19.45
Head and Face P
rotectionH
earing P
rotectionR
espiratory P
rotectionInstrum
entation C
onfined Space
Fall Protection
Hand
Protection
Protective
Workw
earFirst A
id P
roductsS
pill Control &
C
ontainment
Facility S
uppliesFlam
mable
Storage
A
E
D
B
C
219
Cold Weather Task Specific Gloves
A. Mechanix Wear® Wind Resistant Cold Weather GlovesHeavyweight fleece top with wind resistant liner, provides warmth down to 40°F Rubberized palm helps repel water while offering dexterity and tractionAdjustable hook and loop closure allows a snug fit every time
Part Number Description Size PriceMF1MCW-WR-009 Wind Resistant Cold Weather Medium 24.99 MF1MCW-WR-010 Wind Resistant Cold Weather Large 24.99 MF1MCW-WR-011 Wind Resistant Cold Weather XLarge 24.99 MF1MCW-WR-012 Wind Resistant Cold Weather 2XLarge 24.99
B. Valeo® Lined Mechanics GlovesAll the benefits of a mechanics glove, but insulated to keep you warm in the cold3M™ Thinsulate™ InsulationHeat-resistant synthetic leather palmStretch-knit backFlexible, padded knuckle protectionElastic cuff with hook and loop closureMachine washable
Part Number Description Size PriceV14V510-M Lined Mechanics Medium 17.99 V14V510-L Lined Mechanics Large 17.99 V14V510-XL Lined Mechanics XLarge 17.99 V14V510-2X Lined Mechanics 2XLarge 17.99
C. Valeo® Work PRO Waterproof Medium-Duty GlovesInsulated for warmth and comfort3M™ Thinsulate™ Insulation with Hipora® waterproof liner to help keep hands dryGripTech patches on fingertips, thumb and palm for added dexterityStretch-knit, padded back with flexible, cushioned knuckle protectionSynthetic leather palmNeoprene cuff with hook and loop closure
Part Number Description Size PriceV14V520-M Work PRO Waterproof Medium-Duty Medium 21.99 V14V520-L Work PRO Waterproof Medium-Duty Large 21.99 V14V520-XL Work PRO Waterproof Medium-Duty XLarge 21.99 V14V520-2X Work PRO Waterproof Medium-Duty 2XLarge 21.99
D. Ergodyne® ProFlex® 817 Thermal Utility GlovesConstructed of double reinforced synthetic leather on palm and fingers with a padded spandex back and neoprene knuckle pad40 g 3M™ Thinsulate™ Insulation for optimal balance of warmth and dexterityTerry thumb brow wipeWoven elastic cuff with hook and loop closure
Part Number Description Size PriceE5716333 817 Thermal Utility Medium 25.85 E5716334 817 Thermal Utility Large 25.85 E5716335 817 Thermal Utility XLarge 25.85 E5716336 817 Thermal Utility 2XLarge 25.85
E. Ergodyne® ProFlex® 819WP Thermal Waterproof Winter GlovesConstructed of durable synthetic leather with 500D nylon back and gauntlet cuff40 g of 3M™ Thinsulate™ Insulation from for optimal balance of warmth and dexterityHipora® breathable waterproof and windproof insert linerPVC reinforced palm, fingers and saddleEVA knuckle pad with reflective dotsGathered wrist and reinforced fingertips
Part Number Description Size PriceE5716043 819WP Thermal Winter Medium 53.25 E5716044 819WP Thermal Winter Large 53.25 E5716045 819WP Thermal Winter XLarge 53.25 E5716046 819WP Thermal Winter 2XLarge 53.25
Hea
d an
d Fa
ce
Pro
tect
ion
Hea
ring
P
rote
ctio
nR
espi
rato
ry
Pro
tect
ion
Inst
rum
enta
tion
Con
fined
Spa
ceFa
ll P
rote
ctio
nH
and
Pro
tect
ion
Pro
tect
ive
Wor
kwea
rFi
rst A
id
Pro
duct
sS
pill
Con
trol
&
Con
tain
men
tFa
cilit
y S
uppl
ies
Flam
mab
le
Sto
rage
Spi
ll C
oC
onta
ipp
Faci
lity
lies
maaaaa
ma
ma
mabbbbbb
trror
ggagagaaaaa
A
F
D
B
C
G
E
220
Cold Weather Coated and Jersey GlovesA. Radnor® ThermaStat® Insulating Liners
DuPont’s hollow-core hydrophobic polyester protects hands from the coldQuick evaporative rate wicks moisture awayIdeal for use in cold and damp work environmentsAmbidextrous for longer wear, one size fits mostMachine washable
Part Number Description PriceRAD64057000 ThermaStat® Insulating Liner, Blue 2.67 RAD64057001 ThermaStat® Insulating Liner, White 2.67
B. Radnor® Thermal String Knit Coated GlovesSeamless gray 10 gauge acrylic/cotton/poly string knit shell insulates hands from the coldGray textured latex coating on the palm and fingertips to enhance wet or dry gripLatex coating provides general purpose cut and excellent abrasion resistance
Part Number Description Size PriceRAD64056511 Thermal String Knit Coated Small 3.59 RAD64056512 Thermal String Knit Coated Medium 3.59 RAD64056513 Thermal String Knit Coated Large 3.59 RAD64056514 Thermal String Knit Coated XLarge 3.59
C. Ansell PowerFlex® To 80-400 GlovesComfortable combination of brushed terry material and a tough latex palm coatingOffer superior insulation from the cold, durable comfort, great flexibility and dexterityFlexible latex coating repels liquid for excellent wet and dry grip, unmatched fit and comfort without the stiffness of a coated back Caution: Contains natural rubber latex which may cause allergic reactions in some individuals
Part Number Description Size PriceANE80-400-8 PowerFlex® To 80-400 8 7.55 ANE80-400-9 PowerFlex® To 80-400 9 7.55 ANE80-400-10 PowerFlex® To 80-400 10 7.55
D. SHOWA® ATLAS ThermaFit® 451Natural rubber palm coatingSeamless thermal liner for cold environmentsGray with gray coating and a wrinkle gripExcellent wet and dry gripMachine washable
Part Number Description Size PriceB13451S-07 SHOWA® ATLAS ThermaFit® 451 Small 4.06 B13451M-08 SHOWA® ATLAS ThermaFit® 451 Medium 4.06 B13451L-09 SHOWA® ATLAS ThermaFit® 451 Large 4.06 B13451XL-10 SHOWA® ATLAS ThermaFit® 451 XLarge 4.06
E. Memphis Ninja® Therma Force Gloves13 Gauge Dyneema® synthetic fiberglass liner outside7 Gauge acrylic terry liner on the insideBreathable shell for maximum comfort encourages workers to wear their gloves longer, thereby reducing injuriesBlended materials for longer wear and protectionBi-Polymer coating on the palm and fingertips
Part Number Description Size PriceMEGN9690TCM Ninja® Therma Force, Medium 19.86 MEGN9690TCL Ninja® Therma Force, Large 19.86 MEGN9690TCXL Ninja® Therma Force, XLarge 19.86
F. Radnor® 13 oz. Fleece Lined Brown Jersey Gloves13 oz. 100% Cotton jersey with red 100% cotton fleece lining Clute cut with a knitwristProtection to suit a variety of workplace applications
Part Number Description Size PriceRAD64057135 13 oz Fleece Lined Brown Jersey Large 1.37 RAD64057136 13 oz Fleece Lined Brown Jersey XLarge 1.43
G. Radnor® 14 oz. Fleece Lined Brown Jersey Gloves14 oz. 100% Cotton jersey with red 100% cotton fleece liningLining provides added warmth and comfortSlip-on cuff
Part Number Description Size PriceRAD64057139 14 oz Fleece Lined Brown Jersey Men’s 1.71
Knitwrist
Safety Cuff
Head and Face Protection
Hearing Protection
Respiratory Protection
Instrumentation
Confined SpaceFall Protection
Hand Protection
Protective W
orkwear
First Aid Products
Spill Control &
Containment
Facility Supplies
Flamm
able Storage
221
Cold Weather Coated Gloves
A
E
D
B
C
E
A. Radnor® Fluorescent Orange Foam Lined PVC GlovesBright orange PVC coating with a foam over jersey liningProtect against chemicals, oils and greases, and provides abrasion resistanceKeep hands warm while remaining flexible in adverse weather conditionsSmooth finish for excellent grip in dry conditions
Part Number Description Size PriceRAD64056100 Orange Foam Lined PVC, Knitwrist Large 4.08 RAD64056101 Orange Foam Lined PVC, Safety Cuff Large 4.41
B. Ansell Winter Monkey Grip® GlovesLong wearing tough vinyl outer coating resists abrasions, oils and various chemicalsFoam insulation and soft jersey lining locks out cold and seals in warmth while remaining flexible when cold
Part Number Description Size PriceANE23-191-10 Fully Coated, Knitwrist Men’s 10 11.49 ANE23-193-10 Fully Coated, Safety Cuff Men’s 10 11.77 ANE23-152-10 Fully Coated, 12” Gauntlet Cuff Men’s 10 15.09 ANE23-491-10 Hi-Viz Orange Fully Coated, Knitwrist Men’s 10 13.21
C. Ansell Raised Finish Winter Monkey Grip® GlovesFeature a raised vinyl coating that is tough and flexible with an excellent wet and dry gripCurved fingers, wing thumb and soft jersey lining for superior comfortFoam insulation keeps hands warm and dryGloves are fully coated
Part Number Description Size PriceANE23-171-10 Raised Finish Fully Coated, Knitwrist Men’s 10 11.15 ANE23-173-10 Raised Finish Fully Coated, Safety Cuff Men’s 10 12.13
D. Wells Lamont® Flambeau Insulated GlovesRed fluorescent color guarantees that you’ll be seen The low-temperature PVC coating conforms to the shape of the hand and the removable foam insulating liner captures the warmth from your fingertips to your lower forearmA sure grip, wet or dry, stays flexible when coldTreated to resist the growth of mold, mildew and odor-causing germs
Part Number Description Size PriceWLACF2179L Flambeau, Knitwrist Large 8.81
E. Honeywell NorthFlex-Cold Grip™ Winter GlovesSeamless brushed synthetic liner is comfortable and provides insulation from the coldPVC coating extends to the knuckles for liquid resistant protectionCoating is foamed to give excellent dry and wet gripGlove retains flexibility, even at low temperaturesRecommended for temperatures down to -15°F (-26°C)Launderable for added value and longer lifeCuff over-stitching is color-coded by size
Part Number Description Size PriceNOSNF11HD/8M NorthFlex-Cold Grip™ Medium 7.36 NOSNF11HD/9L NorthFlex-Cold Grip™ Large 7.36 NOSNF11HD/10XL NorthFlex-Cold Grip™ XLarge 7.36 NOSNF11HD/11XXL NorthFlex-Cold Grip™ 2XLarge 7.36
