Embed Size (px)
DESCRIPTION
This is the service manual for L80.Please note how to distinguish Mainboard and Strobo of old and new L80.You must read the attahced file(L80.xls).before odering the parts.
Citation preview
2
C O N T E N T S
ⅠⅠ. SPECIFICATION1. CAMERA SPECIFICATION 4
2. SYSTEM REQUIREMENTS 5
3. TFT LCD PANEL MARK 6
4. CONNECTION DIAGRAM 8
5. IDENTIFICATION OF FEATURES 9
ⅡⅡ. INSTALLATION & FAQ 12
ⅢⅢ. EXPLODED VIEW AND PARTS LIST1. MAIN ASSEMBLY 20
2. BODY ASSEMBLY 22
3. BARREL ASSEMBLY 24
4. BARRIER ASSEMBLY 26
5. MIDDLE COVER ASSEMBLY 28
5. FRONT COVER ASSEMBLY 30
6. BACK COVER ASSEMBLY 32
7. CRADLE ASSEMBLY 34
8. PACKING ITEM 36
ⅣⅣ. ADJUSTMENT1. Digital camera service 39
2. ADJUSTMENT 45
3. EEPROM Data Read/Write 59
4. How to check the FIRMWARE VERSION 63
5. How to update the FIRMWARE 64
6. Upgrading the firmware with the Coach Download program 65
ⅤⅤ. PATTERN DIAGRAM1. PARTS ARRANGEMENT FOR EACH PCB ASS’Y
1) MAIN_TOP 70
2) MAIN_BOTTOM 71
3) UI_TOP 72
3
4) UI_BOTTOM 72
5) STROBE_TOP 73
6) STROBE_BOTTOM 73
7) SENSOR_TOP 74
8) SENSOR_BOTTOM 74
9) CRADLE_A_TOP 75
10) CRADLE_A_BOTTOM 75
11) CRADLE_B_TOP 75
ⅥⅥ. CIRCUIT DIAGRAM1. BLOCK DIAGRAM 76
2. CIRCUIT DIAGRAM
1) MAIN_1 77
2) MAIN_2 78
3) MAIN_3 79
4) MAIN_4 80
5) MAIN_SENSOR 81
6) MAIN_POWER 82
7) MAIN_UI/AUDIO 83
8) MAIN_HDMI/REMOTE 84
9) MAIN_POWER MAX 85
10) MAIN_CONNECTOR 86
11) UI 87
12) STROBE 88
13) SENSOR 89
14) CRADLE_A 90
15) CRADLE_B 91
ⅦⅦ. SERVICE INFORMATION1. The order of disassembly and assembly 92
1. CAMERA SPECIFICATION
■ Image Sensor
- Type : 1/1.8"CCD
- Effective Pixel : Approx. 8.1Mega-pixel
- Total Pixel : Approx. 8.4Mega-pixel■ Lens
- Focal Length : SHD f =7.4 - 22.2mm (35mm film equivalent : 35 - 105mm)
- F No. : F2.8 - 5.1-Digital Zoom: Still lmage mode:1.0X-10.0X
Play mode : 1.0X - 12.8X (depends on image size)■ LCD Monitor :2.5" wide view color TFT LCD (230,000 dots)
■ Focusing- Type : TTL auto focus, AF Assist Lamp- Range
■ Shutter
- Type : Mechanical and Electronic shutter
- Speed : Auto : 1 - 1/1,500 sec.
Night : 15 - 1/1,500 sec.
Fireworks : 4 - 1/1,500 sec. ■ Exposure
- Control : Program AE
Metering : Multi, Spot
- Compensation : ±2EV (1/3EV steps)
- ISO Equivalent : Auto, 50, 100, 200, 400, 800 ■ Flash
- Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off
- Range : Wide : 0.3m - 3.7m, Tele : 0.5m - 2.1m
- Recharging Time : Approx. 3.7 sec.
■ Sharpness : Soft, Normal, Vivid
■ Effect : Normal, B/W, Sepia, Red, Green, Blue ,Negative
■ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom
■ Voice Recording : Voice Recording (Max. 1 hour) Voice Memo in Still Image (Max. 10 sec.)
■ Date Imprinting : Date, Date&Time, Off (user selectable)
Ⅰ. SPECIFICATION
4
Normal
Auto Macro
80cm - Infinity
Wide
4 - 80cm
4cm - Infinity
50 - 80cm
50cm - Infinity
Tele
Macro
■ Shooting- Still Image ·Modes : Auto, Program, Wide, Motion Capture, Night, Portrait, Scene, Movie
·Scene : Children, Landscape, Close-up, Text, Sunset, Dawn, Backlight,Fireworks,Beach&Snow
·Shooting : Single, Continuous, AEB(0.3 step unto 3cut)·Self-timer : 10 sec., 2 sec., Double, Remocon (optional)
- Movie Clip :With Audio (recording time : memory capacity dependent)·Size : 640x480, 320x240·Frame rate : 30 fps, 15 fps ·Optical Zoom : up to 3.0X
■ Storage
- Media : Internal 20MB, SD / MMC Card (up to 1GB guaranteed)
- File Format :
- Image Size:
·Wide Shooting Mode
- Internal Capacity (20MB)
·Normal Shooting Mode
Ⅰ. SPECIFICATION
5
8M 7M 6M 5M 4M 3M 2M 1M VGA
0 0 1 1 1 2 3 7 15
4 5 6 7 9 11 19 41 83
9 10 12 14 18 22 34 69 89
13 15 17 21 22 32 41 83 104Fine
Normal
TIFFSuper Fine
Fine
Normal
TIFFSuper Fine
5M 4M 3M 2M 1M
1 1 2 2 5
7 9 11 19 26
14 18 22 31 44
21 2 32 41 62
8M 7M 6M 5M 4M 3M 2M 1M VGA
3264x2448 3072x2304 3072x2304 2592x1944 2272x1704 2048x1536 1600x1200 1024x768 640x480
5M 4M
3264x1632 2816x1408 2272x1136 2048x1024 1600x800
3M 2M 1M
※These figures are measured under Samsung’s standard conditions and may varydepending on shooting conditions and camera settings.
·Wide Shooting Mode
·Movie Clip : AVI (MPEG-4)·Audio : WAV·Normal Shooting Mode
Ⅰ. SPECIFICATION
6
■ Image Play- Type : Single image, Thumbnails, Slide show, Movie Clip- Editing : Trimming, Resizing, Rotate, Color Effect
■ Interface- Digital output connector : USB 2.0 (full speed)- Audio : Mono- Video output : NTSC, PAL (user selectable)- DC power input connector : 4.2V - Speaker : Mono
■ Power Source- Rechargeable battery : 3.7V Li-ion battery - Charger : SBC-L5 , SAC-42※ Included battery may vary depending on sales region.
■ Dimensions (WxHxD) : 106 x 60 x 28(23.7) mm (excluding protrusion)
■ Weight : 153g (without batteries and card)
■ Operating Temperature : 0 - 40°C
■ Operating Humidity : 5 - 85%
■ Software- Camera Driver : Storage Driver (98/98SE/2000/ ME/ XP, Mac OS 9.0 ~ 10.4)- Application : Digimax Master, Digimax Reader
※ Specifications are subject to change without prior notice.※ All trademarks are the property of their respective owners.
Windows 98/ 98SE/ 2000/ ME/ XP Mac OS 9.0~10.4
Minimum 64MB RAM (XP : 128MB)
200MB of available hard disk space
USB port (1GB recommended)
USB port
CD-ROM drive
1024x768 pixels, 16bit color display compatible
monitor (24bit color display recommended)
Ⅰ. SPECIFICATION
7
For playing back a movie clip
Mac OS 10.1 or later
MPlayer, VLC Media Player
Power Mac G3 or laterPC with processor better than Pentium II 450MHz(Pentium 700MHz recommended)
2. System Requirements
Minimum 64MB RAM
110MB of available hard-disk space
USB port
CD-ROM drive
For MacintoshFor Windows
No. Description Icons
2
3 Aperture Value/ Shutter Speed F4.8, 1/60
4 Continuous shot
5 Flash
6 Self-timer
7 Macro
8 Metering
9 Card inserted indicato
10 Continuous auto focus
11 Auto focus frame
12 Camera shake warning
13 Date/ Time 2006/01/01 01:00 PM
14 Exposure compensation
15 White Balance
16 ISO
17 RGB RGB
18 Sharpness
19 Image quality/ Frame rat
Recording mode1
Ⅰ. SPECIFICATION
8
■ Recording mode
3. TFT LCD PANEL MARK
[Image & Full Status]
6②③
⑤
④
⑥
⑦
⑧
⑨
⑰
⑯
⑭
⑮
⑲
⑱
⑳
⑬⑩ ⑫⑪
①
Battery
No. Description Icon
1 Play mode icon
2 Battery
3 Voice Memo
4 Protect
5 DPOF
6 Recording date 2006/04/01
7 Image siz
8 Flash
9 Shutter speed
10 IAperture value
11 ISO
12 Folder name & File nam
20 Image size 아이콘
22 Voice memo
23 Optical/ Digital Zoom bar/ Digital Zoom rate
Number of available shots remaining
Remaining time (Movie clip/ Voice recording21
System Requirements
9
②
①
③
⑤
④
⑩
⑪
⑫
⑨
⑧
⑥
⑦
Av:F2.8Tv:1/30ISO:50
Flash:ON 3264X24482006/03/01
6
00:01:00/ 01:00:00
■ Playback mode
3264X2448 ~ 256X192
ON / OFF
15 ~ 1/1500
F2.8 ~ F13.1
50 ~ 800
100-0007
Ⅰ. SPECIFICATION
10
4. CONNECTION DIAGRAM
TV Monitor
IBM / MACLap top
Card Reader
SD Card
US
B C
able
AV
Cab
le
Ⅰ. SPECIFICATION
11
5. IDENTIFICATION OF FEATURES
Front & Top
Back & Bottom
Camera strap eyelet
Shutter button
Power button
Flash
Speaker
Lens/ Lens cover
Self-timer lamp/ Auto focus lamp
Microphone
Remote control sensor
Mode dial
LCD monitor
USB/
AV connection terminal
5 function button
E (Effect) button
+/- button,
DELETE button
Play mode button/
Printer button
Zoom T button
(Digital zoom)
Camera status lamp
Zoom W button(Thumbnail)
Camera strap
eyelet
Tripod socket
Ⅰ. SPECIFICATION
12
Bottom
5-function button
Battery chamber cover
Voice memo/ Voice Recording/ Up button
Flash/
Left button
Menu/ OK button
Self-timer/
Remote/ Right button
Macro/ Down button
Play & Pause button
Battery chamber
Battery holderMemory card slot
Ⅱ. INSTALLATION & FAQ
13
1. The auto run frame will display. Click the [Install]
menu in the Auto run frame.
2. Install the camera driver and DirectX by selecting a button shown on the monitor. If an upper version of DirectX was
installed on your computer, DirectX may not be installed.
Ⅱ. INSTALLATION & FAQ
14
3. To play back the movie clip recorded with this camera on the computer, install the XviD codec.
※The XviD codec is distributed according to and under the terms and conditions of the GNU General Public License
and everyone can copy, modifiy and distribute this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR
EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; provided, however,
that you have to follow the GNU General Public License whenever you are distributing this codec or modification
thereof. For more information see the GNU General Publice License documents
(http://www.gnu.org/copyleft/gpl.html).
Ⅱ. INSTALLATION & FAQ
15
4. Install the Digimax Master and Digimax Reader in order.
Ⅱ. INSTALLATION & FAQ
16
Ⅱ. INSTALLATION & FAQ
17
5. After restarting the computer, connect the PC to the camera with the USB cable.
6. Turn the camera power on. The [Found New Hardware Wizard] will open andthe computer will recognise the camera.
※ If your OS is Windows XP, an image viewerprogram will open.If the download window ofDigmax Master opens after starting DigimaxMaster, the camera driver was set up successfully.
● If you have installed the camera driver, the [Found New Hardware Wizard] may not open.● On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a
window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CDsupplied. (for Windows 98 and 98 SE).
Ⅱ. INSTALLATION & FAQ
18
FAQ<< For Windows >>
* System Requirements
- Windows 98/98SE, ME, 2000, XP
- Pentium Ⅱ 450MHz or higher (Pentium 700MHz recommended)
- Minimum 200MB hard disk space (1GB recommended)
- Minimum 64MB RAM (128MB recommended)
- 1024X768 pixels, 16-bit colour display compatible monitor
- DirectX 9.0 or later
* Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the
Samsung warranty.
* When the supplied software is installed in the Windows 2000 or XP, log on as an Administrator account.
* If two or more USB devices are connected on a PC, some devices may not operate correctly.
* Connect the camera directly to the PC. Don't use the USB hub or USB located on the keyboard.
* The computer may not recognize the camera when the computer is resuming from the suspend or sleep mode.
* If there are delays when the movie plays back on the camera, copy the files on the computer and play them back
on the computer.
Q1. While the S/W installation, DirectX is inatalled. Do I have to install the
program? A1. To play back a Movie taken with L80 on the computer without any delay, you must install the program. Click the
Install button on the auto-run window and USB driver will be installed first and DirectX 9.0 is installed. If an old
version of DirectX was installed on your compter, DirectX 9.0 will install automatically.
Q2. How can I check the version of installed DirectX? A2. Click [Start →Run] and type 'DXdiag'. Click OK button and a window for checking the DirectX will display. You can
check the version of installed DirectX on the window.
< Note > DirectX is required about 55MB hard disk space. It will take about 22MB hard disk space after installing the
DirectX. It will change settings of applications and registries. You can't remove it as the OS doesn't have
uninstall program.
Q3. My computer can't recognize the camera.A3. (1) Install the supplied USB Driver.
(2) Check the USB cable connection between
the compter and camera.
(3) The connected camera must be turned on. If
the battery capacity is low, change it with fully
charged one or use the AC adapter.
(4) USB menu of the camera setting must be set
as Computer. You can change the setting in
the Setup menu of the camera by using the 5
function button.
Ⅱ. INSTALLATION & FAQ
19
(5) If other USB cables are connected to the compter, remove them. Sometimes the devices crash other. Remove
them and reboot the computer. And then check whether the computer can recognize the camera.
(6) If the steps 1-5 are correct, remove the USB driver and install again.
Q4. How can I check whether the USB Driver was installed correctly?A4. Install the USB Driver and connect the camera and the computer with the supplied USB cable. And then turn them on.
You can find the removeable disk.
(1) "The device is working properly" message will display on the system information window.
(2) The camera driver file has to be installed under the following folders
< Windows 98/98SE >
STP2_83.inf : Windows/inf
DSCPDR.pdr : Windows/system/iosubsys
DSCSYS.sys : Windows/system32/drivers
< Windows ME / 2000 / XP >
usbstor.sys : Windows/system32/drivers
usbstor.inf : Windows/infQ5. Removing the USB Mass Storage driver for Windows 98/98SE
A5. When you remove the USB drivr files for Windows 98/99SE manually, refer to the following steps.
(1) Click [Control Panel →Program Add/Remove] and remove the Digimax L80.
(2) Click [Start →Run].
(3) Type "regedit" to run the regedit program.
(4) Select "HKEY_LOCAL_MACHINE/Enum/SCSI/SAMSUNG_DIGITAL_CAMERA_" and delete the VID :0839,
PID:103F folders by pressing the DEL button.
(5) Select "HKEY_LOCAL_MACHINE/Enum/USB" folder and delete VID_0839&PID_103F folder by pressing the
DEL button.
(6) Select "HKEY_LOCAL_MACHIN/System/CurrentControlSet/Services/Class/hdc" folder. Select each folders
related with "STP2_83.inf" and delete them by pressing the DEL button. The registry structures of Window
2000/XP are different from other Operating Systems. You must check the folder name before deleting the data. To
delete the data, you must log on as administrator account.
Q6. Does L80 support USB 2.0?A6. L80 supports full speed of USB 2.0.
Ⅱ. INSTALLATION & FAQ
20
▶Digimax Master 1.0
Digimax Master is the all-in-on multi media software solution.
You can download, view, edit and save your digital images and movie clips clip with this software.
- Digimax Master can be installed and run in the Windows 98SE but that is not covered by Samsung's warranty.
Q1. When installing the Digimax Master, how to choose the
installing language?
A1. The Digimax Master used in L80 is 1.0.24 version.
This version supports Korean, English, Russian, S.Chinese, T.Chinese, German, French and Spanishi. If your
system language corresponds the supported language, Digimax Master will be installed in your language
\automatically. If not, Digimax Master will be installed only in English.
▶Digimax Reader
- The Digimax Reader used in L80 is 1.0.01 version, and this version supports Korean, EnglishandRussian.
- The cognitive rate of Russian is lower than that of Korean and English.
Q1. Does Digimax Reader recognize any picture or text?A1. Digimax Reader recognizes images taken only by Samsung camera. To recognize the text clearly, the image's
DPI (Dot Per Inch) must be over 300.
Q2. How to take a picture for reconizing as a text?A2. - Choose a distance at which the text can be clearly focused.
(7-8 Mega Pixels : 25cm, 5-6 Mega Pixels : 20cm recommended)
- The subject needs to be centered.
- Seek to avoid camera shake to get a good image.
- When taking a picture of a book or magazine, put some heavy object at the edgy of it.
Ⅱ. INSTALLATION & FAQ
21
Q3. Does Digimax Reader turn the direction automatially?A3. Digimax Reader cannot detect the text in itself. Select the turning direction icon and the text will turn vertically
.
☞Refer to the CS Manual(ex. U-CA 5, #1, etc.) for the common cotents such as explanation of USB 2.0, Xvid,
installing confirmation, etc.
Ⅲ. EXPLODED VIEW AND PART LIST
22
1. MAIN ASSEMBLY
1-5
1-1
1-4
1-12
1-15
1-7
1-6
1-2
1-3
1-8
1-13
1-11
1-9
1-14
1-10
Ⅲ. EXPLODED VIEW AND PART LIST
23
▶ PARTS LIST
Q9007265601A FRONT COVER ASSY-DIGIMAX 1 O
Q9007265601B FRONT COVER ASSY-KENOX 1 O
1-2 Q6003042701A SCREW 4 X
1-3 Q0961900301A SCREW 1 X
1-4 Q9007265801A BACK COVER ASSY 1 O
1-5 Q6003042701A SCREW 5 X
1-6 Q7211068701A TRIPOD 1 O
1-7 Q7217381701A BOTTOM COVER 1 O
1-8 Q6003042701A SCREW 2 X
1-9 Q9007265901A TOP COVER ASSY 1 O
1-10 Q6003042701A SCREW 1 X
1-11 Q6003000801A SCREW 1 X
1-12 Q7409227501A SC CAP SHEET 1 X
1-13 Q9761173501 SCREW 1 X
1-14 Q9761173501 SCREW 1 X
1-15 Q7211085501A LCD WINDOW 1 X
Fig.No Parts No. Parts Name Q’ty Supply Available Parts Remarks
1-1
Ⅲ. EXPLODED VIEW AND PART LIST
24
2. BODY ASSEMBLY
2-36
2-19
2-23
2-8
2-7
2-35
2-34
2-33
2-17
2-28 2-29
2-46
2-39
2-3
2-49 2-38
2-1
2-9
2-10
2-16
2-12 2-11
2-44
2-24
2-32
2-402-47
2-48
2-45
2-252-26
2-27
2-43
2-37
2-22
2-41
2-5
2-42
2-18
2-30
2-15
2-13
2-6
2-14
2-31
2-20
2-21
2-2
2-4
2-1 Q7211085002A CHAMBER 1 O2-2 Q9002145501A BARREL ASSY(WITH DECORING) 1 O2-3 Q7111002702A CCD PLATE 1 O2-4 Q9008105801A CCD_FPCB_SMT_ASSY 1 O2-5 Q9765143007 SCREW 3 X2-6 Q9761174007 SCREW 3 X2-7 Q7011057502A BATTERY CONTACT 3 O2-8 Q6107064001A BATTERY SPRING 1 O2-9 Q9008103501A STROBO FPCB SMD ASSY 1 O2-10 Q0408001101A AF LED 1 O2-11 Q2401007601A MAIN CONDENSER 1 O2-12 Q7211085402B STROBO HOLDER 1 O2-13 Q5900009301A FLASH MODULE 1 X2-14 Q9761173501 SCREW 1 X2-15 Q9761174001 SCREW 2 X2-16 Q3001001501A SPEAKER 1 O2-17 Q9008103601A MAIN PCB ASSY 1 O2-18 Q9761174007 SCREW 1 X2-19 Q9007265401A STRAP PLATE ASSY 1 O2-20 Q7017053501A STRAP PLATE 1 X2-21 Q7411126501A STRAP 1 X2-22 Q7017036201A E-RING 1 X2-23 Q7211085302A STRAP HOLDER 1 O2-24 Q9008103801A TOP PCB ASSY 1 O2-25 Q7017053301A TOP KEY PLATE 1 X2-26 Q9008105901A MODE_FPCB_SMT_ASSY 1 X2-27 Q9761174001 SCREW 2 X2-28 Q7017053401A LCD FRAME 1 O2-29 Q0704012901A LCD 1 O2-30 Q7409224701A LCD TAPE 1 X2-31 Q9761174001 SCREW 3 X2-32 Q7211085102A BATTERY HOLDER 1 O2-33 Q7211085202A BATTERY HOOK 1 O2-34 Q7011057701A BATTERY HOOK SHAFT 1 O2-35 Q6107069501A BATTERY LOCK SPRING 1 O2-36 Q9008103401A FRONT PCB ASSY 1 O2-37 Q9761174001 SCREW 1 X2-38 Q7309048101A IR CUT FILTER CUSHION 1 O2-39 Q3003001201A MIC 1 O2-40 Q9001116101A ASSY BATTERY PLATE 1 O2-41 Q7011057401A BATTERY PLATE 1 X2-42 Q7011058501A BATTERY SUPPORT 1 X2-43 Q9761174001 SCREW 1 X2-44 Q9004088001A STROBO ASSY 1 O2-45 Q7217381802A BATTERY COVER 1 O2-46 Q7011057901A CRADLE PLATE 1 O2-47 Q6107069601A BATTERY HINGE SPRING 1 O2-48 Q7011057601A BATTERY HINGE 1 O2-49 Q2904003702A IR CUT FILTER 1 O
Fig.No Parts No. Parts Name Q’ty Supply Available Parts Remarks
Ⅲ. EXPLODED VIEW AND PART LIST
25
▶ PARTS LIST
Ⅲ. EXPLODED VIEW AND PART LIST
26
3-13-2
3-3
3-5
3-6 3-7
3-9
3-10
3-11
3-13
3-14
3-15
3-16
3-17
3-19
3-21
3-25
3-24
3-23
3-22
3-263-28 3-27
3-35
3-34
3-33
3-323-46
3-36
3-37
3-38
3-393-47
3-48
3-41
3-53
3-52
3-54
3-51
3-49
3-50
3-43
3-44
3-313-45
3-42
3-30
3-30
3-303-29
3-18
3-20
3-12
3-4
3-40
3. BARREL ASSEMBLY
Ⅲ. EXPLODED VIEW AND PART LIST
27
▶ PARTS LIST
3-1 Q7012080802A AF CLIP HOLDER 1 O3-2 Q7012088601A AF CLIP 1 O3-3 Q9002144601A 3RD LENS ASSY 1 O3-4 Q6003000201A SCREW 1 X3-5 Q6107058303A 3RD BARREL SPRING 1 O3-6 Q3104000901A AF MOTOR 1 X3-7 Q4101034801A AF FPCB 1 X3-8 Q4101034701A MAIN FPCB 1 X3-9 Q0608001201A PHOTO INTERRUPTER 1 X3-10 Q0608001001A PHOTO INTERRUPTER 1 X3-11 Q0608000701A PHOTO REFLECTOR 1 X3-12 Q0961900301A SCREW 2 X3-13 Q7212189502A ZOOM COVER 1 O3-14 Q7212189801A ZOOM GEAR_B 1 O3-15 Q7212189701A ZOOMGEAR_A 1 O3-16 Q7212190001A ZOOM GEAR_D 1 O3-17 Q7212189901A ZOOM GEAR_C 1 O3-18 Q6001014001A SCREW 2 X3-19 Q7012088301A AF GUIDE HOLDER 1 O3-20 Q0961900101A SCREW 1 X3-21 Q7012088401A SENSOR HOLDER 1 O3-22 Q7411122601A ZOOM GEAR SHAFT_B 1 X3-23 Q7411122401A ZOOM GEAR SHAFT_A 1 X3-24 Q7411121401A AF GUIDE BAR_A 1 X3-25 Q7411121501A AF GUIDE BAR_B 1 X3-26 Q7212190902A LENS BASE 1 X3-27 Q3107002401A ZOOM MOTOR 1 O3-28 Q7212189601A ZOOM MOTOR GEAR 1 O3-29 Q9611142007 SCREW 2 X3-30 Q0961900301A SCREW 3 X3-31 Q7012086601A CAM DECORATION RING 1 X3-32 Q7212190602A CAM BARREL 1 X3-33 Q7212190401A GUIDE PLATE 1 X3-34 Q9002145101A OUTER GUIDE BARREL 1 O3-35 Q7212190701A OUTER CAM BARREL 1 O3-36 Q7409220002A 1ST SHEET 1 O3-37 Q7012086802A 1ST PUSH PLATE 1 X3-38 Q9002144401A1 1ST LENS ASSY 1 X3-39 Q7212190501A ZOOM RING 1 O3-40 Q0994913101A SCREW 1 X3-41 Q9002144501A1 2ND LENS ASSY 1 O3-42 Q0961900101A SCREW 1 X3-43 Q9005163103A SHUTTER ASSY 1 O3-44 Q7012087103A FPCB GUIDER 1 O3-45 Q6001014001A SCREW 1 X3-46 Q7411120101A OCB PIN 3 O3-47 Q7411122201A 1ST MOVE PIN 3 O3-48 Q7411122302A 2ND MOVE PIN 3 O3-49 Q9008092201A AF MOTOR FPCB ASSY 1 O3-50 Q9008092101A MAIN FPCB ASSY 1 O3-51 Q9002145401A LENS BASE ASSY 1 O3-52 Q9002144901A ZOOM RING ASSY 1 O3-53 Q9002144701A 2ND LENS BARREL ASSY 1 O3-54 Q9002145301A OUTER CAM BARREL ASSY 1 O
Fig.No Parts No. Parts Name Q’ty Supply Available Parts Remarks
Ⅲ. EXPLODED VIEW AND PART LIST
28
4-2
4-2
4-9
4-1
4-3
4-4
4-4
4-5
4-64-7
4-7
4-8
4. BARRIER ASSEMBLY
4-1 Q7012086503A FRONT DECORING 1 O
4-2 Q6003048101A BARRIER SCREW 2 X
4-3 Q7212189103A FRONT PANE 1 X
4-4 Q7212189302A BARRIER FRAME 2 O
4-5 Q7212189205A BARRIER BASE 1 O
4-6 Q7212189404A BARRIER LEVER 1 O
4-7 Q6107065501A CLOSE SPRING 2 O
4-8 Q6107065401A OPEN SPRING 1 O
4-9 Q9002145201A BARRIER ASS’Y 1 O
Ⅲ. EXPLODED VIEW AND PART LIST
29
▶ PARTS LIST
Fig.No Parts No. Parts Name Q’ty Supply Available Parts Remarks
Ⅲ. EXPLODED VIEW AND PART LIST
30
5-1
5-3
5-2
5-17
5-12
5-13
5-5
5-4
5-16
5-15
5-18
5-6
5-7
5-9
5-8
5-11
5-10
5-14
5. TOP_COVER_ASSEMBLY
Ⅲ. EXPLODED VIEW AND PART LIST
31
5-1 Q7117015001A TOP COVER 1 X
5-2 Q7217381202A TOP HOLDER 1 X
5-3 Q7409235701A TOP HOLDER TAPE1 1 X
5-4 Q7409002501A TOP HOLDER TAPE2 1 X
5-5 Q7409239101A SPEAKER SPONGE 1 X
5-6 Q7217382002A MODE DIAL 1 O
5-7 Q7409175404A MODE DIAL TAPE 1 O
5-8 Q7017053701A MODE DIAL DECO 1 O
5-9 Q7017039003A MODE CLICK SPRING 1 O
5-10 Q9008060101A MODE CONTACT ASSY 1 O
5-11 Q7411126301A SPEAKER PLATE 1 O
5-12 Q6003046102A SCREW 1 X
5-13 Q6001019101A SCREW 1 X
5-14 Q7217381302A RELEASE DECO 1 X
5-15 Q6107059701A RELEASE SPRING 1 O
5-16 Q7217381401A RELEASE BUTTON 1 O
5-17 Q7217381501A POWER BUTTON 1 X
5-18 Q9007268801A ASM TOP SUB ASSY 1 O
▶ PARTS LIST
Fig.No Parts No. Parts Name Q’ty Supply Available Parts Remarks
Ⅲ. EXPLODED VIEW AND PART LIST
32
6-2
6-5
6-6
6-7
6-1
6-4
6-3
6-8
6. FRONT COVER ASSEMBLY
Ⅲ. EXPLODED VIEW AND PART LIST
33
Q7217380502A FRONT COVER-DIGIMAX 1 X
Q7217380502B FRONT COVER-KENOX 1 X
6-2 Q7217380702B HAND GRIP 1 X
6-3 Q7217380301A REMOCON WINDOW 1 X
6-4 Q7217372502A AF LED WINDOW 1 X
6-5 Q7217380801A FRONT DECO FACE 1 X
6-6 Q7217380902A FRONT DECO GUIDE 1 X
6-7 Q7411126401A FRONT DECO RING 1 X
6-8 Q7017053201A FRONT PLATE 1 X
▶ PARTS LISTFig.No Parts No. Parts Name Q’ty Supply Available Parts Remarks
6-1
Ⅲ. EXPLODED VIEW AND PART LIST
34
7-2
7-1
7-5
7-7
7-6
7-4
7-3
7-8
7-9
7. BACK COVER ASSMEBLY
Ⅲ. EXPLODED VIEW AND PART LIST
35
▶ PARTS LIST
7-1 Q7217380602A BACK COVER 1 X
7-2 Q7217380402A AF LED LAMP 1 X
7-3 Q7217381101A NAVI BUTTON 1 X
7-4 Q7017053601A REAR PLATE 1 X
7-5 Q7217382401A ZOOM BUTTON 1 X
7-6 Q7217381001A FUNCTION BUTTON 1 X
7-7 Q7217382501A OK BUTTON 1 X
7-8 Q7409235501A LCD SPONGE 1 X
7-9 Q7409235601A LCD WINDOW TAPE 1 X
Fig.No Parts No. Parts Name Q’ty Supply Available Parts Remarks
Ⅲ. EXPLODED VIEW AND PART LIST
36
8. PACKING ITEM
8-4 8-18 8-178-15 8-14
8-1
8-6
8-5
8-11
8-8
8-3
8-9
8-10
8-2
8-7
8-21
8-198-20
8-18
8-12 8-168-13
Ⅲ. EXPLODED VIEW AND PART LIST
37
▶ PARTS LIST
8-1 QP960210101A PE BAG (FOR CAMERA) 18-2 Q6909018202A PE BAG (FOR ACCESSORY) 18-3 Q6901241101A INNER PAD_KENOX X80_KOR 18-4 Q7409236301A STRAP_KOR/EXP 18-5 Q4609014401A DRIVER + Digimax Master + Digimax Reader 18-6 Q6909018501A AIR BAG(FOR CAMERA) 18-7 Q6904030101A POUCH 1
Q6806342101A Q/GUIDE_Digimax L80_ENG 1Q6806341901A Q/GUIDE_KENOX X80 1Q6806342201A Q/GUIDE_Digimax L80_GER 1Q6806342301A Q/GUIDE_Digimax L80_FRA 1Q6806342401A Q/GUIDE_Digimax L80_SPA 1Q6806342501A Q/GUIDE_Digimax L80_ITA 1Q6806342601A Q/GUIDE_Digimax L80_CHI(T) 1Q6806342701A Q/GUIDE_Digimax L80_DUT 1Q6806342801A Q/GUIDE_Digimax L80_POR 1Q6806342901A Q/GUIDE_Digimax L80_SWE 1 Q6806343001A Q/GUIDE_Digimax L80_DEN 1Q6806343101A Q/GUIDE_Digimax L80_FIN 1 Q6806343201A Q/GUIDE_Digimax L80_RUS 1Q6806343301A Q/GUIDE_Digimax L80_CHI(S) 1Q6806343401A Q/GUIDE_Digimax L80_TK 1Q6806343501A Q/GUIDE_Digimax L80_IND 1Q6806343601A Q/GUIDE_Digimax L80_ARA 1Q6806000601A Q/GUIDE_Digimax L80_THA 1Q6806343701A U/MANUAL_Digimax L80_ENG 1Q6806342001A U/MANUAL_KENOX X80 1Q6806343801A U/MANUAL_Digimax L80_GER 1Q6806343901A U/MANUAL_Digimax L80_FRA 1Q6806344001A U/MANUAL_Digimax L80_SPA 1Q6806344101A U/MANUAL_Digimax L80_ITA 1 Q6806344201A U/MANUAL_Digimax L80_CHI(T) 1Q6806344301A U/MANUAL_Digimax L80_DUT 1Q6806344401A U/MANUAL_Digimax L80_POR 1Q6806344501A U/MANUAL_Digimax L80_SWE 1Q6806344601A U/MANUAL_Digimax L80_DEN 1Q6806344701A U/MANUAL_Digimax L80_FIN 1Q6806344801A U/MANUAL_Digimax L80_RUS 1
Q6806344901A U/MANUAL_Digimax L80_CHI(S) 1
Q6806345001A U/MANUAL_Digimax L80_TK 1Q6806345101A U/MANUAL_Digimax L80_IND 1
Fig.No Parts No. Parts Name Q’ty Remarks
8-8
8-9
Fig.No Parts No. Parts Name Q’ty Remarks
Ⅲ. EXPLODED VIEW AND PART LIST
38
Q6806345201A U/MANUAL_Digimax L80_ARA 1Q6806001701A U/MANUAL_Digimax L80_THA 1 QP955150101F WARRANTY CARD 1Q6807003003U WARRANTY CARD_EXP 1Q6807012301A WARRANTY CARD_2 YEARS 1Q6807010903C WARRANTY CARD_RUS(3 YEARS) 1Q6807011301B WARRANTY CARD_TSOE(CHINA) 1Q6807009502E CARD_PRODUCT(Mexico) 1Q6807012101A WARRANTY CARD_IRAN 1Q6804012401A WARRANTY CARD_TURKEY 1Q6804012501A SERVICE CENTER_TURKEY 1Q6901240901A G/T BOX_Digimax L80_EXP/AUS 1Q6901241001A G/T BOX_Digimax L80_USA/CAN 1Q6901240801A G/T BOX_KENOX X80_KOR 1
8-12 Q3802006101A 24PIN USB Cable 18-13 Q3802004901A 24PIN AV CABLE 1 8-14 Q4302001101A LITHIUM-ION_SLB-0837 1
Q4401001101A AC_ADAPTOR_4.2V (SAC-42)_EXP 1Q4401001201A AC_ADAPTOR_4.2V (SAC-42)_USA 1 Q4401001301A AC_ADAPTOR_4.2V (SAC-42)_UK 1Q4401001401A AC_ADAPTOR_4.2V (SAC-42)_AUS 1Q4401001501A AC_ADAPTOR_4.2V (SAC-42)_TSOE 1
8-16 Q4719005001A CHARGER 1Q3801005201A AC CODE CABLE_EXP 1Q3801003001A AC CODE CABLE_KOR-D1 1Q3801004901A AC CODE CABLE_USA 1Q3801005101A AC CODE CABLE_UK 1Q3801005001A AC CODE CABLE_AUS 1
8-18 Q9010055101A REMOCON 1Q7409241101A FCC LABEL_Digimax L80_EXP (MADE IN KOREA) 1Q7409241201A FCC LABEL_Digimax L80_EXP (MADE IN CHINA) 1Q7409241301A FCC LABEL_Digimax L80_EXP (MADE BY SAMSUNG) 1Q7409241401A MIC LABEL_KENOX X80(MADE IN KOREA) 1Q7409241501A MIC LABEL_KENOX X80(MADE IN CHINA) 1
8-20 QP282190101A SERIAL NO. STICKER 1
8-21 Q7409241601A PRODUCT STICKER 1
8-10
8-11
8-15
8-17
8-19
1. Digital camera service
To take a digital camera service (Repair, Tuning and Checking), the following equipments have to be arranged.
The sequences for the camera service are as shown.
1. Receiving the cameraWhen receiving a camera, check whether the accessories areincluded or not and ask the customer exact problems.
2. Checking the cameraChecking the camera with priority given to the exact problems to findoverall malfunctions.
3. Repairing the cameraRepair the camera malfunctions found at the step 2.
4. InspectionAfter repairing the camera, inspect all of the camera functions.
※The illustrations may be different from the real display in accordance with the camera model.
39
Ⅳ. ADJUSTMENT
Receiving the camera
Checking the camera
Repairing the camera
Tuning
Finish
1. Checking the camera and Inspection 2. Repairing the camera 3. Tuning
Inspection
40
Ⅳ. ADJUSTMENT
1) Equipments for checking and inspection
To check and inspect the camera malfunction, the following equipments have to be arranged.
①
②③
⑤
⑥
⑦
⑧
⑪
⑨ ⑩
④
No. Device Description- Installing a digital camera driver or Checking the removable device
- Checking the file transference(upload and download)
- Playing back the still image or movie clip
HARD RACK, For the compatibility test.
by Operating System by the O/S(WIN 98SE, ME, 2000, XP)
3 Driver CD, by camera models S/W CDs for installing a camera driver
4 USB HUB For using all kinds of USB cable at a time
5 USB cable, by camera models For checking file transference(upload and download) by camera models
6 Chart for checking colors For checking color and image resolution before or after camera repair
7 TV MONITOR For checking video output and whether NTSC/PAL can be selected
8 Memory card by types checking card recognition by brands and sizes
9 A/V CABLE For checking whether the image can be displayed on a external monitor10
11 For checking camera power by camera models
1
2
PC for inspection
POWER SUPPLY
Power cable by camera models
41
Ⅳ. ADJUSTMENT
2) Equipments for camera repair
To repair the camera, the following equipments have to be arranged.
①②
③
⑤
⑥
⑨
④
No. Device Description1 A set of tools Pincette/ Screwdriver/ Discharger etc.2 Cleaning paper For cleaning camera lens and camera parts3 Detergent container For containing detergent4 Parts case For keeping various camera parts and disassembled camera parts5 Anti-electricity mat For repairing table made from anti-electricity material6 Soldering sponge For removing solder7 Air pump For removing various kinds of dust8 LIGHT BOX Color temperature 51009 POWER SUPPLY 7.5V 2.0A10 Soldering iron Soldering iron that can select temperature11 Tester Portable tester that can test AC/DC, Ω,♪ect.
AC ADAPTOR & Rechargeable battery by camera models- SBP3603/ SBP3605/ SBP3606- SLB 1437- SBP 1103
⑩
⑧
⑪
⑫
⑬
⑦
12BATTERY &AC
ADAPTOR
42
Ⅳ. ADJUSTMENT
3) Equipments for camera tuning
To tune the camera, the following equipments have to be arranged.
①
②
③
⑤
⑥
No. Device Description1 AE TESTER For tuning AE and STROBE
AWB LIGHTSOURCE BOX
3 COLOR chart For checking AWB and color of images4 AF chart For tuning AF5 Chart for checking resolution For checking image resolution6 TRIPOD
④
2For checking and tuning
AWB
43
Ⅳ. ADJUSTMENT
4) Check list for Digital camera repair
To check the digital camera functions before/after repairing, refer to the check list.
No. Checking item Check point
2
5
6
7
8
9
4
Check the exterior of a camera.
Insert the adapter.
Check the battery cover.
Check the card condition after
inserting the card.
Insert the Video cable.
Turn on the camera.
Press the zoom W/T button.
Macro focus.
Normal focus.
- Check the scratch, stain, misprint.Check whether the screws are turned firmly.
- Check the corrosion of terminal, bad exterior.Do chemical and glue test to the printing/ painting parts.
- Check the connecting and contact condition.
- Insert the batteries with the correct polarity and check the
contact condition.
Check whether the cover is opened easily after closing.
- The card can be inserted or removed easily and cover isclosed firmly.
- Do inserting and removing card(SD/MMC) test twotimes.→ The card must be inserted firmly and has not tspring
out.- Insert the card/batteries and give a little impact on thecamera. The camera must recognize the card and “CARDLOCKED” message has not to be displayed.
- When the cable is inserted, check whether the
images play back on the external monitor.
- Check whether the green LED is blinking, SAMSUNG
LOGO is on and the start-up sound sounds.
- Check the “L” and “FINE” icon on the LCD monitor.
- Checkwhether the AE function is correct at the low light
and high light condition.
- Check whether the “beep” sounds on the recording and
movie clip mode.
→ The “beep”can be sounded in the microphone part.
Check that in a quiet room.
- Press the zoom W/T button with the viewfinder.→ Check dust and percentage of theframeseen,zoomrate.
- Press the zoom W/T button with the TFT-LCD monitor.→ Check the zoom rate and whether the zoom bar movessmoothly.
- Check whether the Macro icon(Flower) is displayed on the LCD monitor.-
Check the AF in the Macro focus with the TFT-LCD monitor.
- Check whether the subject captured from 2M has over or
under exposure and the fucus is clear.
1
3
No. Checking item Check point
11
12
14
17
18
15
16
13
MANUAL focus.
Take a movie clip with TELE zoom during 10
seconds.
Take a chart with TELE zoom in a low light
condition.
Play back a image with the TFT LCDmonitor.
Start the slide showin the PLAY mode.
Format the card in the PLAY mode.
(Delete all images in the PLAY mode)
Try to rotate the mode dial.
Download a image from a PC with USB
cable and check the image quality in a
external monitor.
Check whether there is no image and reset the
camera. Remove the card and turn off the
camera.
- Check whether the icon and counter are displayed on the LCD
monitor.
- Check whether the recording time is displayed and there are a
noise, dim frame and discontinuous frame in the movie clip.
- Check whether the zoom rate is changed and there are unclear part,
noise and dim part in the image.
- The distance from the subject is 2M and have to use the FILL IN flash.
- Check whether the PLAY mode can be selected without any
problem and there are any noise, frame shaking and
discoutinuous frame.
- Check the voice recorded in the still image and the movie clip.
- Check whether the still image can be enlarged correctly with the 5
function button.
- Select 2 sec. of slide show interval time and check whether there
are any noise, image shaking and discontinuous frame.
- Check whether the mode dial is rotated with the equal force.
- Check whether each camera mode can be recognized correctly.
- Check whether there are unclear part, dim part, noticeable flare,
noise, ghost image and smear.
- Check whether all images are deleted.
- Check whether the “NO IMAGE” message is displayed on the
number are displayed.
Check whether the camera power is turned off without nyproblem.
10
44
Ⅳ. ADJUSTMENT
45
Ⅳ. ADJUSTMENT
2. Adjustment items by changed parts
PROCESS MAIN POWER BARREL CCDCODE PCB PCB ASS’Y
FIRMWARE UPGRADE ● ●
PUNT ADJ. 2 ● ● ●
SHUTTER CLOSE TIME ADJ. 7 ● ● ●
LENS SHADING 8 ●
BACK LASH ADJ. 9 ● ● ●
FLASH ADJ. 13 ● ●
BATTERY LEVEL 17 ● ●
OB SETTING 18 ● ●
DEFECTIVE PIXEL 18 ●
BURNING TEST 10 ● ● ● ●
EEPROM READ 16EEPROM WRITE 17
1) Equipments for adjustment
▶Equipments - AE TESTER : AE TESTER can test upto LV 16.1.- POWER SUPPLY : 3.3V/2A
▶Chart - Focus chart
After changing the electronic parts of Digimax L80, the parts have to be adjusted in accordance withe the adjusteditems.The items listed on the table are have to be adjusted after changing.
Program Codes of program Codes of
<1> PROCESS CODE ; Insert the PROCESS CODE that you want to adjust
<2> 65535 ; 65535 --> DEFAULT
<3> PROCESS CODE ; Insert the PROCESS CODE that you want to adjust
<4> 0 OR 1 ; Insert 1 to write adjusted code to the EEPROM
<5> 0 OR 1 ; To save the result data to the SD card, insert 1 or 0
<6> CONDITION ; Insert each adjustment item's condition (See each adjustment item)
<7> SPEC ; Insert each adjustment item's value (See each adjustment item)
<8> NOT Not used
<9> NOT Not used
<10> NOT Not used
<11> NOT Not used
<12> NOT Not used
<13> NOT Not used
<14> 0 0 --> DEFAULT
<15> 0 0 --> DEFAULT
46
Ⅳ. ADJUSTMENT
3. Adjustment
To adjust all items, all kinds of code by items have to be inserted in program file and saved them to the SD cardas TXT file type. The codes are listed below.
< Description of TXT file >
If the program is saved as shown above, the file name has to be saved as STP2_83ADJ.TXT.
※ SD CARD SHOULD BE FORMATTED BEFORE USING.
※ After inserting each code, [;] mark has to be inserted.
47
Ⅳ. ADJUSTMENT
PREVIEW OB SETTINGR: 1808 G: 1792 B: 1792CAPTURE OB SETTINGR: 1808 G:1808 B: 1808
< Figure 1-1 >
EXPOSURE : 8XECREF LEVEL : 3500DEFECT PIXEL : 308SUCCEDD!!
< Figure 1-2 >
1) OB SETTING
After changing the MAIN PCB, adjust the black color.
< Codes of program >
BASIC PROGRAM OB SETTING
<1> PROCESS CODE ; <1>18;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>18,1;
<4> 0 OR 1 ; <4>1,1;
<5> 0 OR 1 ; <5>1;
<6> CONDITION ; <6>5,0,0,0,200,100;
<7> SPEC ; <7>39,0,0,0,200,100;
<8> NOT <8>1;
<9> NOT <9>6,0;
<10> NOT <10>1,1;
<11> NOT <11>1;
<12> NOT <12>1,3500,800,6;
<13> NOT <13>30000,0;
<14> 0 <14>65535;
<15> 0 <15>0;
< How to adjust >a. Insert the codes and save the program in the SD card.b. Insert the SD card to the camera and turn on the camera.c. After completing the adjustment, the camera will be turned off.
48
Ⅳ. ADJUSTMENT
Lens Shading TEST
Result : Shading Success!
Before : 59,60,67,67,100
After : 69,56,96,98,100
Lens Shading Success !
Lens Shading TEST
Result : Shading Failure! (X)
Before : 196, 8, 73, 160, 100
After : 45, 53, 146, 66, 100
NG
< Figure 2-2 >< Figure 2-1 >
2) LENS SHADING
After changing the MAIN PCB, BARREL and CCD, adjust the brightness gaps between center of the lens and around the lens.
< Codes of program >
< How to adjust the item >a. Prepare a AE TESTER that can test upto LV 16.1±0.2b. Attach the camera to the AE TESTER.
(Distances from the camera to the AE TESTER should be within 1.5cm. c. Change the LV to 8.5±0.1d. Insert the codes and save the program in ths SD card.e. Insert the SD card to the camera and turn on the camera.f. After completing the adjustment, the camera will be turned off.
※ If the adjustment is incomplete, <Figure 2-1> will display with beep sound. In this case, re-try the adjustment process.
BASIC PROGRAM LENS SHADING
<1> PROCESS CODE ; <1>8;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>8,2;
<4> 0 OR 1 ; <4>1,1;
<5> 0 OR 1 ; <5>1;
<6> CONDITION ; <6>60,200;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>65535;
<15> 0 <15>0;
49
Ⅳ. ADJUSTMENT
3) BATTERY LEVEL ADJUSTMENT
After changing the MAIN PCB, adjust WARNING LEVEL and LOCK LEVEL.
< Codes of program >
< How to adjust the item >a. Prepare a POWER SUPPLY.b. Connect the camera to the POWER SUPPLY.c. Change the voltage to 3.7.d. Insert the codes and save the program in ths SD card.e. Insert the SD card to the camera and turn on the camera.f. The adjustment is complete automatically. The LCD will turn on and off without any display.
BASIC PROGRAM BATTERY LEVEL ADJUSTMENT
<1> PROCESS CODE ; <1>17;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>17,3;
<4> 0 OR 1 ; <4>0;
<5> 0 OR 1 ; <5>0;
<6> CONDITION ; <6>5,37,201,38,207,39,196,40,200,48,198;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>;
<15> 0 <15>0;close lens
50
Ⅳ. ADJUSTMENT
PPROCESS FAILBACKLASH TEST NG
BACKLASH : XX
D1:-27
BACKLASH : -27
< Figure 4-2 >< Figure 4-1 >
4) BACK LASH ADJUSTMENT
After changing the MAIN PCB, BARREL and CCD, adjust the BACK LASH.
< Codes of program >
<How to adjust the item>a. Insert the codes and save the program in the SD card.b. Insert the SD card to the camera and turn on the camera. c. After completing the adjustment, the camera will be turned off.
BASIC PROGRAM BACK LASH
<1> PROCESS CODE ; <1>9;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>9,1;command, delay
<4> 0 OR 1 ; <4>1,1;
<5> 0 OR 1 ; <5>1;
<6> CONDITION ; <6>2,50;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>65535;
<15> 0 <15>0;
51
Ⅳ. ADJUSTMENT
TEST COUNT : 5LUMINANCE : 510LINE DELAY : 249SHUTTER ADJ SUCCESS!
PROCESS FAIL
TEST COUNT : 15LUMINANCE : 3048LINE DELAY : 109
< Figure 5-2 >< Figure 5-1 >
5) SHUTTER CLOSE TIME ADJUSTMENT
After changing the MAIN PCB, BARREL and CCD, adjust the SHUTTER CLOSE TIME.
< Codes of program >
< How to adjust the item >a. Prepare a AE TESTER that can test upto LV 16.1±0.2b. Attach the camera to the AE TESTER.c. Change the LV to 15.8±0.1d. Insert the codes and save the program in ths SD card.e. Insert the SD card to the camera and turn on the camera. f. After completing the adjustment, the camera will be turned off.※ If the adjustment is incomplete, <Figure 5-2> will display with beep sound. In this case, re-try the adjustment process.
BASIC PROGRAM SHUTTER CLOSE TIME
<1> PROCESS CODE ; <1>7;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>7,1;
<4> 0 OR 1 ; <4>1,1;
<5> 0 OR 1 ; <5>1;
<6> CONDITION ; <6>1,607,577,244,2,15;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>65535;
<15> 0 <15>0;
6) FLASH ADJUSTMENT
After changing the MAIN PCB and SUB PCB, adjust the FLASH.
< Codes of program >
< How to adjust the item >a. Arrange a 18% reflect chart in a darkroom.b. Arrange a camera in a darkroom.c. The distance between the reflect chart and the camera should be 80cm.d. Insert the codes and save the program in the SD card.e. Insert the SD card to the camera and turn on the camera. f. After completing the adjustment, the camera will be turned off.※ If the adjustment is incomplete, <Figure 6-2> will display with beep sound. In this case, re-try the adjustment process.
52
Ⅳ. ADJUSTMENT
STROBO TESTTEST CNT : X ▲MIN▼LUMINANCE : XXXSTROBO ADJ SUCCESS!!AWB Adj Rgain:XXX Bgain:XXX
PROCESS FAIL
STROBO TESTTEST CNT : X ▲MAX▼LUMINANCE : XXXFLASH ADJ IN WIDEFAIL!!AWB Adj ▶ NG
< Figure 6-2 >< Figure 6-1 >
<1> PROCESS CODE ; <1>13;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>13,1;
<4> 0 OR 1 ; <4>1,1;
<5> 0 OR 1 ; <5>2;
<6> CONDITION ; <6>6500,4000,2500,600,950,430,730,250,500,640,470,360,260,9;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>
<12> NOT <12>
<13> NOT <13>;
<14> 0 <14>65535;
<15> 0 <15>0;
BASIC PROGRAM BURNING TEST
53
Ⅳ. ADJUSTMENT
PUNT ADJUSTMENT PROCESSZOOM 0 : 127ZOOM 1 : 123ZOOM 2 : 117ZOOM 3 : 117ZOOM 4 : 123ZOOM 5 : 129ZOOM 6 : 120ZOOM 7 : 117
< Figure 7-2 >< Figure 7-1 >
7) PUNT ADJUSTMENT
After changing the MAIN PCB and BARREL, adjust the PUNT.
< Codes of program >
< How to adjust the item >a. Arrange a chart for adjust the PUNT.b. Attach the camera to the tripod.c. The distance between the chart and the camera should be 80cm.d. Insert the codes and save the program in the SD card.e. Insert the SD card to the camera and turn on the camera. f. After completing the adjustment, the camera will be turned off.※ If the adjustment is incomplete, < Figure 7-2 > will display. In this case, re-try the adjustment process.
BASIC PROGRAM PUNT ADJUSTMENT
<1> PROCESS CODE ; <1>2;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3> 2,3;
<4> 0 OR 1 ; <4> 1,1;
<5> 0 OR 1 ; <5> 1;
<6> CONDITION ; <6> 0,0,1,2,3,4,5,6,7;Iris,Zoom Level
<7> SPEC ; <7> 20,394,21,429,32,418,46,404,61,397,79,395,100,402,122,412;
<8> NOT <8> 34,373,41,408,52,398,66,384,81,376,99,375,120,381,142,391;
<9> NOT <9> -43,10,-39,10,-38,20,-21,11,-14,20,-10,25,-10,38;
<10> NOT <10> ;
<11> NOT <11> ;
<12> NOT <12> ;
<13> NOT <13> ;
<14> 0 <14> 65535;
<15> 0 <15> 0;
8) BURNING TEST & CCD DEFECT
BURNING TEST : After changing the MAIN PCB & parts, check whether the camera operates correctly or not.CCD DEFECT CELL : After changing the MAIN PCB & parts, run the BURNING TEST. And then adjust thedefect of the CCD CELL.
< Codes of program >
BASIC PROGRAM BURNING TEST
<1> PROCESS CODE ; <1>10;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>10,0;
<4> 0 OR 1 ; <4>>0;save to e2prom
<5> 0 OR 1 ; <5>0;don't save to sd card
<6> CONDITION ; <6>20,14,1,2,4,3,6,7,8,9,10,11,12,13,14,15;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>65535;
<15> 0 <15>0;close lens
Specify the repeat times
54
Ⅳ. ADJUSTMENT
Total numberof codes
Camera functionnumber
55
Ⅳ. ADJUSTMENT
< How to test >a. Insert the camera function number to the <6> code.
The first position is for repeat time (10 means 10 repeat time), the rest of the positions are for camera function. See thebelow list.
b.Insert the codes and save the program in the SD card.c. Insert the SD card to the camera and turn on the camera. (Set the mode dial to a still image mode)d. The BURNING TEST will start automatically. After the adjustment, CCD DEFECT CELL test will start automatically.
If the test is complete, the camera will be turned off with beep sound.
CODE Function CODE Function
1 DELETE ALL 9 MACRO SHOOTING
2 LCD ON 10 CONTINUOUS SHOOTING(2)
3 WIDE 11 SELF TIMER (10 sec.)
4 TELE 12 PLAY MODE
5 NOT USE 13 SLIDE SHOW
6 FLASH ONSHOOTING 14 MOVIE CLIP RECORD
7 FLASH OFF SHOOTING 15 MOVIE PLAY
8 NORMAL SHOOTING
< Codes of program >
56
Ⅳ. ADJUSTMENT
9) EEPROM READ
To read the data of EEPROM, refer to the below codes.
< Codes of program >
BASIC PROGRAM EEPROM READ
<1> PROCESS CODE ; <1>16;
<2> 65535 ; <2>65535;
<3> PROCESS CODE ; <3>16,3;
<4> 0 OR 1 ; <4>0;
<5> 0 OR 1 ; <5>1;
<6> CONDITION ; <6>0,500;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>;
<15> 0 <15>0;close lens
< How to test >a. Insert the codes (from START ADDRESS 0 to END ADDRESS 500) and save the program in the SD card.b. Insert the SD card to the camera and turn on the camera.c. Turn on the camera and the DATA in the EEPROM will be copied in the SD card. The codes from ADDRESS 1to 10 will display on the LCD monitor and the rest of codes will not display.d. Turn off the camera after reading and saving the data.e. If you read the SD card in your PC, you can find the STS2_E2PR.CSV file and you can check the EEPROM
DATA.
57
Ⅳ. ADJUSTMENT
10) EEPROM WRITE
If you want to write the DATA of EEPROM, do as follows.
< Codes of program >
< How to test >a. Insert the codes (from 0 to 500) and save the program in the SD card.b. Insert the SD card to the camera and turn on the camera.c. Turn on the camera and the data of EEPROM will be copied to the camera.d. When the copy is complete, turn off the camera.
BASIC PROGRAM EEPROM WRITE
<1> PROCESS CODE ; <1>17;
<2> 65535 ; <2>65535;53248
<3> PROCESS CODE ; <3>17,3;
<4> 0 OR 1 ; <4>0;
<5> 0 OR 1 ; <5>0;
<6> CONDITION ; <6>Sum_ADD,ADDRESS 0,DATA, ,....,ADDRESS 158,DATA;
<7> SPEC ; <7>;
<8> NOT <8>;
<9> NOT <9>;
<10> NOT <10>;
<11> NOT <11>;
<12> NOT <12>;
<13> NOT <13>;
<14> 0 <14>;
<15> 0 <15>0;
Number of ADDRESSes you want to insert Ifyou want to insert all addresses (from 0 to500), 501 will display.
4. How to check the FIRMWARE VERSION
1. Remove the SD card from the camera and turn it on
2.After entering the voice recording mode, press the Left, Right, Down and DEL(+/-)button inorder.
3. Check the firmware version and turn off the camera by using the Power button.
58
Ⅳ. ADJUSTMENT
59
Ⅳ. ADJUSTMENT
4. After completing the upgrade, the camera is turned off automatically. Remove the SD card and check the firmware whether it is updated or not. If the values of D0, D1, L0 are 0, control the Lens Shading of CCD defect cell.
※Note that you have to use fully charged battery when you upgrade the firmware. Or, the camera maybe turned off while it is upgraded. Should this be the case, the camera may not operate forever. Aftercompleting the upgrade, reset the camera.
3. The camera status lamp blinks and the firmware is upgraded.
5. How to update FIRMWARE
1. Connect the service site ‘ww.samsungcamera.com/service’ and download the FIRWARE in the arbitrary older. (The file name is st8m.elf)
2. Insert the SD card that has the firmware and turn on the camera. Press the Left, Right, Down and DEL(+/-) button in order.
60
Ⅳ. ADJUSTMENT
6. Upgrading the firmware with the Coach Download program
When connecting the camera to a pc for the first time, install the driver.① Select X of the USB mode in test mode and turn the power off.
② After powering on the camera and connecting it to a pc, you can check whether the pc reconizes the camera or not.
③ When the searching window as the following is shown, Click Browse.
61
Ⅳ. ADJUSTMENT
④Select the driver about L80.
⑤ When the camerar is recognized correctly, the camera displays in the device manager.
62
Ⅳ. ADJUSTMENT
⑧After setting the camera on the Jig, start the tool for Firmware upgrade.
⑥After checking whether the pc reconizes the camera or not, turn off the camera.⑦Prepare the Jig for connecting with camera. Move the switch of the Jig as the following image and connect the
camera with USB cable.
63
Ⅳ. ADJUSTMENT
⑨Select the options as shown and set up the Main and DDR. Press the start button of the program and Powerbutton of the camera at the same time.
⑩The status bar as shown progresses and the full version upgrade starts.
64
Ⅳ. ADJUSTMENT
⑪When the 'Burning Competed' message displays, disconnect the camera.
65
Ⅴ. PATTERN DIAGRAM
1. PARTS ARRANGEMENT FOR EACH PCB ASS’Y1) MAIN_TOP
66
Ⅴ. PATTERN DIAGRAM
2) MAIN_BOTTOM
67
Ⅴ. PATTERN DIAGRAM
3) MODE
68
Ⅴ. PATTERN DIAGRAM
5) CARD_BOTTOM
4) CARD_TOP
69
Ⅴ. PATTERN DIAGRAM
7). STROBE
6) CCD
U1CCD±ICX476AQF
J1C
CD
±FA
CB
±CO
NN
EC
T
70
Ⅵ. CIRCUIT DIAGRAMⅥ. CIRCUIT DIAGRAM
CCD-8M(ICX476)
15V,-7.5V
(CXD4805)3V,3.3V,15V,-7.5V
LENS MDRIVER
(FOCUS,ZOOM,IRIS,SHUTTER)
3V,3.3V,4.1V
COACH-8m(ZR36460)
3.3V1.8V2.5V
STROBOBLOCK
KEYSWITCH
POWERBLOCK
TFT-LCD2.5"
LTV250QV-F06
AudioAmplifier
DDRDRAM-512Mb
(K4H511638C-UCB3)
SD
CARD
FLASH-256Mb(K9F5608UOC)
MIC
USBJACK
EEPROM(M24C08)
Speaker
AVOUT
108MHz
LENS
3V
VIDEOFiliter
LED(AF,STROBO)
Receiver
36MHz
PLL12 MHz
RTC32.768 KHz
DOTCLK18 MHz
1. BLOCK DIAGRAM
71
Ⅵ. CIRCUIT DIAGRAM
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
NT
ED_J
VN
TE
D_JV
AFPI
1LT
NC
BU
S1L
TN
CB
US
1LT
NC
BU
S1L
TN
CB
US
1LT
NC
BU
S1L
TN
CB
US
1LT
NC
BU
S1L
TN
CB
US
1LT
NC
BU
S1L
TN
CB
US
1LT
NC
BU
S1L
TN
CB
US
PW_SW
2_5VCC_MAIN2_5VCC_MAIN
3_3VCC_ADC
ZPI_CNT
3_3VCC_HR
TU
OE
NILT
UO
ENIL
TU
OE
NILT
UO
ENIL
TU
OE
NILT
UO
ENIL
TU
OE
NILT
UO
ENIL
ZPI
FD[7..0]
ZPR_CNTZPR
DEL_L
A
TU
OKL
CC
TU
OKL
CC
TU
OKL
CC
TU
OKL
CC
TU
OKL
CC
TU
OKL
CC
TU
OKL
CC
TU
OKL
CC
KEY_IN1
RC_ON
3_3VCC_MAIN
CCD_CNT2CCD_CNT2CCD_CNT2CCD_CNT2CCD_CNT2CCD_CNT2CCD_CNT2CCD_CNT2CCD_CNT2CCD_CNT2
VCC
TO
M_C
CV3
15VCC_CCD15VCC_CCD3VCC_CCD
N7_5VCC_CCDN7_5VCC_CCD
BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1BL_CNT1
CCD_CNT3D
EL_C
CV5
3_3VCC_AUD3_3VCC_AUD3_3VCC_AUD3_3VCC_AUD3_3VCC_AUD3_3VCC_AUD3_3VCC_AUD
5VCC_LED 5VCC_LED
AT
AD
PS
AT
AD
PS
DH
KLC
PS
KLC
PS
KLC
PS
LA
VE
FA
LA
VE
FA
LA
VE
FA
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
LA
VG
TL
AV
GT
3VCC_MOT
3_3VCC_MAIN3_3VCC_MAIN
3_3VCC_COACH
3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN
SH2
PCI
M
RAMDAT[15..0]RAMADD[14..0]
MODE_KEY
NCI
M
MLED
2_5VCC_DDR
RAMUDQSRAMLDQS
GIR
TH
SLF
YD
AE
RF
EG
RA
HC
XRESETXRESETXRESET
RAMVREFXRAMCSRAMCKEN
PWRON
SH1
XRAMWEXRAMRASXRAMCAS
]0..11[A
TA
DC
RAMUDM
LT
NC
BU
SL
TN
CB
US
LT
NC
BU
SL
TN
CB
US
LT
NC
BU
SL
TN
CB
US
LT
NC
BU
SL
TN
CB
US
LT
NC
BU
SL
TN
CB
US
LT
NC
BU
SL
TN
CB
US
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
RAMLDM
PLAY_ON
KLC
C
TS
R_P
EF
PD
BS
UP
DB
SU
PD
BS
UP
DB
SU
XRAMCLK
1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN1_8VCC_MAIN
EFFECT
OB
OR
TS_
CC
V5
5VCC_STROBO 5VCC_STROBO
3_3VCC_COACH
ND
BS
UN
DB
SU
ND
BS
UN
DB
SU
ZOOM[1..0]SHUTT[1..0]
POWER_ON
SU
BV
BS
US
UB
VB
SU
SB
VC
SB
VC
SB
VC
SB
VC
4_5VCC_MOT
CCD_CNT1
IRIS[1..0]FOCUS[3..0]
CC
VC
CV
RAMCLK
AFPI_CNT
VDDPWR
DCL_
CC
V3 _3
TELEWIDEDEL
BAT_CHK
NWPSEALEALEXFRESCEXFWRXFWRCLECLEXFOEXFRESBSYXFRESBSY
FCLKSDCDSD_WP
VCC
]0..7[T
AD
DCL
CN
YS
HC
NY
SV
NE
SK
CS
TA
DS
TS
R_D
CLKL
CD
CL
PD
ELB
ND
ELB
RC_CNT
SPKRP1SPKRN1
XFEXTCE1
VDDRTC
5VCC
3_3VCC_COACHCT
RD
DV
CARD PCB
COACH-8M
COACH83_3VCC_COACH
3_3VCC_MAIN
1_8VCC_MAIN
2_5VCC_DDR
2_5VCC_MAIN
KLC
C
XFRESBSY
]0..7[T
AD
DCL
SCL
DH
IRIS[1..0]
NWP
LA
VE
FA
RAMCKEN
TA
DS
ZPI_CNT
TS
R_P
EF
RAMUDQS
ND
BS
U
PW_SW
AFPI
FCLK
TS
R_D
CL
ZPR_CNT
RAMLDM
SD_WP
XFRESCE
XRAMRAS
CN
YS
V
KC
S
FD[7..0]
RAMVREF
XFWR
]0..11[A
TA
DCAFPI_CNT
XRAMCLK
PD
BS
U
RAMADD[14..0]RAMCLK
NT
ED_J
V
XRAMCS
SU
BV
BS
U
CN
YS
H
XFOE
TU
OE
NIL
RAMDAT[15..0]
RAMLDQS
NE
S
CLE
AT
AD
PS
XRESET
XRAMCAS
SE
ZPI
RAMUDM
KLC
DCL
XRAMWE
SHUTT[1..0]
ALE
DV
SDA
VDDPWR
BL_CNT1
LT
NC
BU
S
KLC
PS
SDCD
XFEXTCE1
ZOOM[1..0]
FOCUS[3..0]
CCD_CNT2
3_3VCC_AUD
ZPR
VDDRTC
CCD_CNT1
LA
VG
T
CCD_CNT3
SB
VC
1LT
NC
BU
S
TU
OKL
CC
GIR
TH
SLF
YD
AE
RF
EG
RA
HC
MODE_KEY
SH1SH2
PLAY_ONPWRON
EFFECTPOWER_ONVDDPWR
KEY_IN1
3_3VCC_ADC
DEL_L
A
PCI
MN
CIM
RC_ON
MLED
TELEWIDEDEL
M_PS BAT_CHK
RC_CNT
SPKRN1SPKRP1
POWER
POWER
3_3VCC_AUD
VDDRTC
VDDPWR
PW_SWN7_5VCC_CCD
15VCC_CCD3VCC_CCDBLEDN
BLEDP
BL_CNT1
3_3VCC_MAIN2_5VCC_MAIN1_8VCC_MAIN
CCD_CNT1
XRESET
CCD_CNT3
3_3VCC_HR
TO
M_C
CV5_ 4
TO
M_C
CV3
CCD_CNT2
5VCC_LED
VCC
5VCC_STROBO
3_3VCC_LCD
BAT_CHK
5VCC
IO&LCD
IO&LCD
SB
VC
HC
AO
C_C
CV3_3
SU
BV
BS
U
PD
BS
UN
DB
SU
TU
OE
NIL
NT
ED_J
V
PCI
MN
CIM
CC
V
]0.. 7[T
AD
DCL
CN
YS
HC
NY
SV
NE
SK
CS
TA
DS
TS
R_D
CLKL
CD
CL
3_3VCC_LCD
BLEDNBLEDP
MOTOR
MOTOR I/F3_3VCC_MAIN
4_5VCC_MOTZOOM[1..0]
SHUTT[1..0]IRIS[1..0]
FOCUS[3..0]AFPI_CNT
AFPIZPI_CNT
ZPR_CNTZPI
ZPR
3VCC_MOT
M_PS
STROBO
STROBO
GIR
TH
SLF
YD
AE
RF
EG
RA
HC
DEL_L
A
DEL_
CC
V5
OB
OR
TS_
CC
V5
CC
V
FEP
FEP I/F
TS
R_P
EF
KLC
C
KLC
PS
DV
DH
LA
VE
FA
LT
NC
BU
S
AT
AD
PS
]0..11[A
TA
DC
3VCC_CCD
N7_5VCC_CCD15VCC_CCD
LA
VG
T
3_3VCC_HR
1LT
NC
BU
S
TU
OKL
CC
DDR&MEMORY1
DDR&MEMORYRAMLDM
XRAMWE
XRAMCASXRAMRAS
RAMCKEN
RAMCLKXRAMCLK
RAMUDM
XRAMCSRAMVREF
RAMDAT[15..0]RAMADD[14..0]
RAMLDQSRAMUDQS
2_5VCC_DDR
3_3VCC_COACH
FD[7..0]NWP
SEALE
XFRESCEXFWR
CLEXFOE
XFRESBSY
SCLSDA
CARD PCB
XFEXTCE1FCLK
SD_WPSDCD
VDDRTC
RC_CNTRC_ON
5VCC
3.3VCC_COACH
KEY
KEY I/F
MODE_KEY
SH1SH2
3_3VCC_ADCPWRON
PLAY_ON
NIA
M_C
CV3_3
EFFECTPOWER_ON
VDDPWR
KEY_IN1
MLED
TELEWIDE
DEL
SPKRN1SPKRP1
1) MAIN_1
2. CIRCUIT DIAGRAM
72
Ⅵ. CIRCUIT DIAGRAM
MICPMICN
IKL
CV
RTCXI
ELA
RTCXO
PD
BS
U
SPKRP
XRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCASXRAMCAS
EO
FX
ND
BS
U
SPKRN
ELC
PW_SW
RAMVREF
PWRON
OKL
CV
SU
BV
BS
U
MICENB
TE
SR
BS
U
RW
FX
XRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRASXRAMRAS
KLC
F
RSET
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
ES
AFPI_CNTAFPISHUTT1SHUTT0
ZPI_CNTZPR_CNTZOOM1
FOCUS3FOCUS2FOCUS1FOCUS0
IRIS1IRIS0
ZOOM0
CDATA10CDATA11
CDATA9CDATA8CDATA7CDATA6CDATA5CDATA4CDATA3CDATA2
HDVD
SUBCNTL
SPDATASPCLK
AFEVAL
CCLK
SCLSDA
XRESET
PDETECT
IP
ZR
PZ
1NI_
YE
K
YE
K_E
DO
M
CDATA0CDATA1
TGVAL
VCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOPDETECTPDETECT
XRESET
YD
AE
RF
2H
S
EG
RA
HC
TC
EF
FE
1H
S
GIR
TH
SLF
NT
ED _J
VN
O _Y
ALP
NO_
RE
WO
P
RAMDAT0RAMDAT1RAMDAT2RAMDAT3RAMDAT4RAMDAT5RAMDAT6RAMDAT7RAMDAT8RAMDAT9RAMDAT10RAMDAT11RAMDAT12RAMDAT13RAMDAT14RAMDAT15
TS
R_P
EF
TS
R_P
EF
DC
DS
EC
SE
RF
X
1E
CT
XE
FX
PW_
DS
YS
BS
ER
FX
ND
WP_
OID
UA
1T
NC_
DC
CP
WN
KLC
DCL
LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]
NE
SN
ES
KC
SK
CS
KC
SK
CS
TA
DS
TA
DS
CN
YS
HC
NY
SH
CN
YS
VC
NY
SV
CN
YS
VC
NY
SV
CN
YS
VC
NY
SV
CN
YS
VC
NY
SV
SUBCNTL1
AL_LED
LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]LCDDAT[7..0]
VCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKI
RTCXIRTCXIRTCXIRTCXIRTCXIRTCXI
RTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXO
1T
AD
DCL
0T
AD
DCL
7T
AD
DCL
6T
AD
DC L
5T
AD
DC L
4T
AD
DCL
3T
AD
DCL
2T
AD
DCL
AUDIO_PWDN
SPKRN
SPKRP
CCD_CNT2
CCD_CNT3
FA15
FA12FA13
FA23
FA16
FA21FA21
RAMADD4RAMADD4RAMADD4RAMADD4RAMADD5RAMADD5RAMADD5RAMADD5RAMADD6RAMADD6RAMADD6RAMADD6RAMADD7RAMADD7RAMADD7RAMADD7RAMADD8RAMADD8RAMADD8RAMADD8RAMADD9RAMADD9RAMADD9RAMADD9RAMADD10RAMADD10RAMADD10RAMADD10RAMADD11RAMADD11RAMADD11RAMADD11RAMADD12RAMADD12RAMADD12RAMADD12RAMADD13RAMADD13RAMADD13RAMADD13RAMADD14RAMADD14RAMADD14RAMADD14
32A
F32
AF
3 2A
F
61A
F61
AF
61A
F61
AF
61A
F
4 1A
F4 1
AF
4 1A
F4 1
AF
4 1A
F
02A
F02
AF
02A
F1 2
AF
1 2A
F1 2
AF
9 1A
F9 1
AF
9 1A
F81
AF
81A
F81
AF
51A
F51
AF
51A
F
22A
F22
AF
22A
F
21A
F21
AF
21A
F
71A
F71
AF
71A
F
31A
F31
AF
31A
F31
AF
31A
F
1D
F1
DF
1D
F1
DF
1D
F
7D
F7
DF
7D
F
4D
F4
DF
4D
F5
DF
5D
F5
DF
3D
F3
DF
3D
F3
DF
3D
F
6D
F6
DF
6D
F
0D
F0
DF
0D
F
2D
F2
DF
2D
F
MICNMICNMICNMICNMICNMICNMICNMICNMICN
MICENB
MICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICP
DEL_L
A
MICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICPMICP
RAMCLK
XRAMCLK
FA22FA22FA22FA22
DX
R
DX
T
AD
S
LC
S
RE
WO
PD
NG
RAMLDMRAMUDMRAMLDQSRAMUDQSXRAMCSXRAMWERAMCKEN
FA18FA18
FA20FA20FA19FA19
MICENBMICENBMICENBMICENB
PDETECT
BL_CNT1
GPIO2
KH
C_T
AB
VDDRTC VDDRTC
M_PS
FA14FA17
LCDDAT0LCDDAT1LCDDAT2
LCDDAT4LCDDAT3
VCMVCMAREF
LCD_RSTLCD_RSTLCD_RSTLCD_RST
LE
D
SPKRN1
SPKRP1
AF_LED
DEL_
FA
TN
C_C
R
LCDDAT[4..0]
VCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKIVCLKI
VCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKOVCLKO
VCLKIVCLKIVCLKIVCLKI
RTCXIRTCXIRTCXI
RTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXORTCXO
RAMADD0
RAMADD3
RAMADD1RAMADD2
TXDRXD
NO_
CR
NO
C_E
GR
AH
C
E LE
T
ED I
W
]0 ..7 [D
F
XRAMWE
XRAMRAS
CVBS
RAMUDM
XRAMCS
SU
BV
BS
U
RAMLDM
RAMCKEN
RAMLDQS
PW_SW
XRAMCAS
RAMUDQS
IRIS[1..0]
FOCUS[3..0]
ZOOM[1..0]
SHUTT[1..0]
CDATA[11..0]
HDVD
SUBCNTL
SPDATASPCLK
AFEVAL
CCLK
SCLSDA
PWRON
YE
K_E
DO
M
PD
BS
UN
DB
SU
RAMADD[14..0]
RAMCLK
XRAMCLK
ZPI_CNTZPR_CNT
AFPI_CNTAFPI
TGVAL
YD
AE
RF
IP
ZR
PZ
EG
RA
HC
1H
S2
HS
TC
EF
FE
FCLK
SDCDFEP_RST
XFOEXFWR
XFRESBSYXFRESCE
SD_WPXFEXTCE1E
S
PW
N
ELC
ELA
1T
NC_
DC
C
LCDDAT[7..0]
SDAT
LCD_RST
VSYNC
SCK
HSYNC
SEN
LCDCLK
SUBCNTL1
NO_
RE
WO
PN
O_Y
ALP
NT
ED_J
V
GIR
TH
S LF
3_3VCC_MAIN
1_8VCC_MAIN
2_5VCC_MAIN
CCD_CNT2
CCD_CNT3
MICN
MICP
LINEOUT
RAMDAT[15..0]
RAMVREF
AL_LED
3_3VCC_AUD
VDDPWR
1NI_
YE
K
M_PS
KH
C_T
AB
3_3VCC_COACH
3_3VCC_ADC
2_5VCC_DDR
VDDRTC
LE
D
SPKRP1
SPKRN1
TN
C_C
R
BL_CNT1
NO_
CR
NO
C_E
GR
AH
C
TELEWIDE
12A
F
3_3VCC_COACH 1_8VCC_COACH
3_3VCC_COACH
1_8VCC_USB
3_3VCC_DAC
1_8VCC_MAIN
3_3VCC_MAIN
2_5VCC_MAIN
3_3VCC_ADC
3_3VCC_COACH
2_5VCC_DDR
3_3VCC_COACH
3_3VCC_COACH
3_3VCC_COACH3_3VCC_COACH
2_5VCC_DDR
2_5VCC_DDR
VDDRTC
3_3VCC_USB
3_3VCC_ADC
2_5VCC_DDR
VDDRTC
1_8VCC_COACH
3_3VCC_COACH
3_3VCC_COACH
1_8VCC_COACH
1_8VCC_COACH
3_3VCC_AUD
3_3VCC_AUD
VCC
VDDPWR
VDDPWR
VDDPWR
3_3VCC_ADC
1_8VCC_USB 3_3VCC_USB
3_3VCC_DAC
3_3VCC_ADC
3_3VCC_COACH
8 - 5 Boot
NAND
0101 - 16-32M
1000 - SD 4b
[AUDIO PART]
Boot Loc
Clk bypass
Boot 7
Vis bus
Boot 8
Boot 5
Reserve
Boot 6
MS
Boot Spd
1.5 PAI
UART TEST
[POWER]
RESERVED CONFIGURATION PINS
12
K 933 21
RK 93
3 21R
C13510/10V(2)
C13510/10V(2)
FB110 BLM18PG181SN1(1)FB110 BLM18PG181SN1(1)
C133
0.1
C133
0.1
R137 150K(1%)R137 150K(1%)
12
K9330 1
RK 93
30 1R
C106
0.1
C106
0.1
C109
0.01
C109
0.01
C128
0.01
C128
0.01
TP1083_3VCC_MAIN
TP1083_3VCC_MAIN
TP100GPIO2TP100GPIO2
+TC102
47/6.3V(A)
+TC102
47/6.3V(A)
12
K93621
RK9 3
6 21R
1N
S1 21B
B51M L
B101
BF
1N
S1 21B
B51M L
B101
BF
C120
0.1
C120
0.1
+TC100
33/6.3V(A)
+TC100
33/6.3V(A)
12
K93111
RK93
1 11R
FB109 BLM18PG181SN1(1)FB109 BLM18PG181SN1(1)
12
K0114 1
RK01
14 1R
C115
0.1
C115
0.1
FB117BLM18PG181SN1(1)FB117BLM18PG181SN1(1)
R132
1K1
R132
1K1
C107
0.1
C107
0.1
FB116 BLM18PG181SN1(1)FB116 BLM18PG181SN1(1)
1N
S121B
B51M L
B0 01
BF
1N
S1 21B
B51M L
B0 01
BF
NE
PO
201C
NE
PO
201C
12
K 93201
RK 93
201R
12
R136
100K
R136
100K
R138 150K(1%)R138 150K(1%)
12
K93901
RK 93
901R
C14327P C14327P
C134
0.01
C134
0.01
K01151
RK01
151R
X10112MHz(FCX-03)
X10112MHz(FCX-03)
C112
0.1
C112
0.1
R165OPENR165OPEN
12
K93011
RK 93
011R
12
K010 21
RK01
0 21R
12
K 001601
RK 001
601R
C119
0.01
C119
0.01
12
K93811
RK93
8 11R
C116
0.1
C116
0.1
12
R1490R R1490R
C141
0.01
C141
0.01
1N
S121B
B5 1ML
B701
BF
1N
S121B
B5 1ML
B701
BF
12
)% 1(91
K62 41
R)
% 1(91K6
2 41R
C124
0.1
C124
0.1
12
K01501
RK0 1
501R
C105
0.1
C105
0.1
12
R134
150K(1%)
R134
150K(1%)
C1467P C1467P
TP102VDD_RTCTP102VDD_RTC
R131 10KR131 10K
C1451(1)C1451(1)
1N
S121B
B5 1ML
B601
BF
1N
S1 21B
B5 1ML
B601
BF
R127 33RR127 33R
12
K93401
RK93
401R
12
R143
2M7(1%)
R143
2M7(1%)
R021611
RR02 1
611R
1 2
SW101Boot8SW101Boot8
C111
0.1
C111
0.1
2
13
Q101DTC114YE(EMT) / KRC407E
Q101DTC114YE(EMT) / KRC407E
C125
0.01
C125
0.01
R1481K2 R1481K2
1N
S121B
B51ML
B501
BF
1N
S121B
B51ML
B501
BF
1 2C131 0.047C131 0.047
C1427P C1427P
TP104TXDTP104TXD
C127
0.1
C127
0.1
12C137 1/6.3VC137 1/6.3V
+TC101
47/6.3V(A)
+TC101
47/6.3V(A)
K03211
RK0 3
2 11R
C113
0.1
C113
0.1
C117
0.1
C117
0.1
12
K33441
RK 33
441R
5K1
5 11R
5K1
5 11R
R 0251
RR 0
251R
C140
0.1
C140
0.1
C114
0.1
C114
0.1
R128 33RR128 33R
+TC104
22/10V(A)
+TC104
22/10V(A)
1N
S121B
B51M L
B4 01
BF
1N
S121B
B51M L
B4 01
BF
12
C138
OPEN
C138
OPEN
12
K01221
RK0 1
2 21R
K0 3311
RK0 3
311R
1.0101
C1.0
101C
1 2
R14733K R14733K
12
C139
0.1
C139
0.1
TP105RXDTP105RXD
12
C126
1(1)
C126
1(1)
+TC103
68/6.3V(A)(Conformal)
+TC103
68/6.3V(A)(Conformal)
12
C132
0.1
C132
0.1
C103
0.1
C103
0.1
12
R135
820K(1%)
R135
820K(1%)
12
K001701
RK 001
701R
1N
S1 21B
B5 1ML
B30 1
BF
1N
S1 21B
B5 1ML
B30 1
BF
12
K93521
RK93
521R
C121
0.1
C121
0.1
R1304K7
<Implementation>
R1304K7
<Implementation>
X102
32.768KHz
X102
32.768KHz
12
C130
1n
C130
1n
FB114 BLM18PG181SN1(1)FB114 BLM18PG181SN1(1)
C118
0.1
C118
0.1
12C136 1/6.3VC136 1/6.3V
1N
S121B
B 51M L
B201
BF
1N
S1 21B
B 51M L
B201
BF
FB115 BLM18PG181SN1(1)FB115 BLM18PG181SN1(1)
R155 0R(1)R155 0R(1)
K01411
RK01
411R
TP109GNDTP109GND
1 2 0.047C129 0.047C129
C104
0.1
C104
0.1
1 2
SW104Boot5SW104Boot5
1 2
R146150R R146150R
12
K93421
RK 93
421R
12
K 9380 1
RK 93
80 1R
K0 17 11
RK0 1
7 11R
C1441(1)C1441(1)
C122
0.1
C122
0.1
1 2
SW102Boot7SW102Boot7
VID4P19
VID5R20
VID6M19
VID7N18
VID8N17
VID9R18
VID10P20
VID11P18
HIST19
VISR19
CCLKOUTT20
EXPCNTLT3
SUBCNTLU4
SPDATAU13
SPCLKV12
TGVALU11
AFEVALV9
NC1U15
NC2T17
SCLV16
SDAV15
DN
G61
D
RESET_NA20
PWRON0B20
PWRENBH18
PDETECTD18
VDDPWRC20
GNDPWRE17
RTCXIF18
RTCXOE18
VDDRTCG18
9LT
NC
VD
91K
8LT
NC
VD
02 L
7LT
NC
VD
02K
6LT
NC
VD
91J
5LT
NC
VD
02J
4LT
NC
VD
02H
3LT
NC
VD
02G
2 LT
NC
VD
81J
1LT
NC
VD
91H
0LT
NC
VD
81K
KLC
VD
02F
7T
AD
VD
81L
6T
AD
VD
8 1M
5T
AD
VD
91G
4T
AD
VD
91F
3T
AD
VD
02E
2T
AD
VD
91E
1T
AD
VD
02D
0T
AD
VD
91D
32A
F3
N
22A
F4
N
1 2A
F4
M
0 2A
F3
K
91A
F4L
81A
F2
K
7 1A
F4
K
61A
F3J
51A
F2J
41A
F1
K
31A
F1J
21A
F3
H
11A
F2
H
0 1A
F1
H
9A
F2
G
8A
F1
G
7A
F1
F
6A
F2
F
5A
F3
G
4A
F1
E
3A
F2
E
2A
F3
F
1A
F1
D
0A
F2
D
N_E
CS
ER
F3L
N_1E
CT
XE
F2
N
N_ 2E
CT
XE
F7
V
N_R
WF
1M
N_E
OF
1L
N_Y
SB
SE
F3
M
N _Y
SB
TX
EF
3R
KLC
F2
M
N_1D
CF
4V
N_2D
CF
2U
TS
RT
XE
F6
V
DM
COI
DS
F3
P
KLC
OID
SF
1P
OID
SM
F5
V
7D
F1
N
6D
F1
U
5D
F2 L
4D
F1
T
3D
F4
T
2D
F2
P
1D
F2
R
0D
F1
R
M1AB4M1BA4M1CC5M1DD4M2AC4M2BA3M2CB3M2DD3M3AC3M3BE3M3CA2
M4AA1M4BC2M4CB1M4DC1
M3DB2
RAMDAT0 V1
RAMDAT1 Y1
RAMDAT2 Y2
RAMDAT3 Y3
RAMDAT4 Y4
RAMDAT5 Y5
RAMDAT6 Y6
RAMDAT7 Y7
RAMDAT8 W8
RAMDAT9 W7
RAMDAT10 W6
RAMDAT11 W5
RAMDAT12 W4
RAMDAT13 W3
RAMDAT14 W2
RAMDAT15 W1
RAMADD0 Y18
RAMADD1 Y19
RAMADD2 Y20
RAMADD3 V19
RAMADD4 V20
RAMADD5 W20
RAMADD6 W19
RAMADD7 W18
RAMADD8 W17
RAMADD9 W16
RAMADD10 Y17
RAMADD11 W15
RAMADD12 W14
RAMBA0 Y15
RAMBA1 Y16
RAMCAS_N Y12
RAMRAS_N Y13
RAMCLK W12
RAMCLK_N Y11
RAMLDM Y9
RAMUDM W10
RAMLDQS Y8
RAMUDQS W9
RAMCS_N Y14
RAMWE_N W11
RAMVREF Y10
RAMCKEN W13
VDDDDR0 U5
VDDDDR1 U6
VDDDDR2 U8
VDDDDR3 U10
VDDDDR4 U12
VDDDDR5 U14
VDDDDR6 U16
NC4 V13NC3 V14
DAIN A7
DAOUT B7
DAMCLK C8
DASCLK C9
DAFRM C7
LINEOUT C15
MIC A19
MICENB C19
SPKRN A16
SPKRP A15
AREF B17
VCM B18
VDDAUD G17
VDDSPKR B16
GNDAUD B19
MIC_N A18
GNDSPKR B15
CVBSB13
RSETA13
VDDDACD14
GNDDACB14
RXDT2TXDU3CTSV3RTSV2
EJTCKU7EJTDIV10EJTDOV8EJTMSV11
DN
G71
U
DN
G9
M
DN
G8 1
U
DN
G01
M
DN
G9L
DN
G21L
DN
G11L
DN
G2 1
M
DN
G1 1
M
DN
G21
K
DN
G11
K
DN
G01
K
DN
G9J
DN
G01L
DN
G9
K
DN
G02
U
DN
G91
U
PD
DV
71P
PD
DV
71M
PD
DV
4F
PD
DV
11D
PD
DV
8 1T
PD
DV
4R
DN
G0 1J
PD
DV
71K
PD
DV
7 1J
PD
DV
4G
PD
DV
4H
ER
OC
DD
V4J
ER
OC
DD
V71
H
ER
OC
DD
V71L
ER
OC
DD
V9
U
ER
OC
DD
V4
P
ER
OC
DD
V9
D
DN
G11J
DN
G2 1J
AD
DV
11C
IKL
CV
9A
OKL
CV
01A
AD
NG
8A
0OI
PGL
X71
D
1OI
PG L
X7 1
F
2OI
PG L
X0 1
C
3OI
PGL
X4
E
4OI
PG L
X8
D
5OI
PGL
X8
B
0M
WP
5D
1M
WP
6C
2M
WP
5B
3M
WP
5A
4M
WP
6B
5M
WP
6A
6M
WP
6D
7M
WP
7D
GIR
TH
S LF
71V
NID
PF
81V
CD
AD
DV
41C
CD
AD
NG
21D
0C
DA
PG
21C
1C
DA
PG
41A
HPL C16HPR D15
4C
DA
PG
71C
5C
DA
PG
71A
ND
BS
U21
A
PD
BS
U11
A
DIB
SU
81C
NE
RW
PB
SU
01D
TE
SR
BS
U31
D
SU
BV
BS
U31
C
BS
UD
DV
11B
LLP
BS
UD
DV
01B
LLP
BS
UD
NG
9B
BS
UD
NG
21B
VID1L19
CCLKR17
VID2N19
VID0M20
VID3N20
DLCD INTERFACE
EC
AF
RE
TN
I R
DD
EC
AF
RE
TN
I
OID
UAEJTAG INTERFACE
CCDINTERFACE
AUXILIARY PORT
PWRC INTERFACE
RTC INTERFACE
TV OUTPUT
UART PORT
ADCINTERFACE
EB
OR
TS
H
SA
LFPOWER PINS
PWMPORT
USBINTERFACE
FLASH/ROM MEMORY INTERFACE
PLLPORT
XLGPIOPORT
LENSINTERFACE
U102
COACH-8m (ZR36460)
DLCD INTERFACE
EC
AF
RE
TN
I R
DD
EC
AF
RE
TN
I
OID
UAEJTAG INTERFACE
CCDINTERFACE
AUXILIARY PORT
PWRC INTERFACE
RTC INTERFACE
TV OUTPUT
UART PORT
ADCINTERFACE
EB
OR
TS
H
SA
LFPOWER PINS
PWMPORT
USBINTERFACE
FLASH/ROM MEMORY INTERFACE
PLLPORT
XLGPIOPORT
LENSINTERFACE
U102
COACH-8m (ZR36460)
C110
0.1
C110
0.1
TP1033_3VCC_COACH
TP1033_3VCC_COACH
C123
0.1
C123
0.1
C108
0.1
C108
0.1
R1451M
<Implementation>
R1451M
<Implementation>
LED1SSCGR101 LED1SSCGR101
C1510.1
C1510.1
12
K001911
RK00 1
911R
V101
004
X815
0N
VCI
V101
004
X815
0N
VCI
12
K 9310 1
RK 93
10 1R
12
K 00 11 21
RK 00 1
1 21R
SHUTDOWN1
NC2
IN+3
IN-4
Vo- 8
GND 7
VDD 6
Vo+ 5
U101 TPA2005D1U101 TPA2005D1
R161 0R(1)R161 0R(1)
C14727P C14727P
R133392R(1%)R133392R(1%)
2) MAIN_2
73
Ⅵ. CIRCUIT DIAGRAM
RAMLDQS
RAMDAT14RAMDAT13
RAMDAT12
RAMDAT10RAMDAT9
RAMLDMXRAMWEXRAMCAS
RAMUDM
RAMVREF
RAMDAT15
RAMDAT11
RAMDAT8
RAMUDQS
XRAMCLK
XRAMCSRAMCKENXRAMRAS
RAMDAT0
RAMDAT1RAMDAT2
RAMDAT3RAMDAT4
RAMDAT5RAMDAT6
RAMDAT7
RAMADD0RAMADD8
RAMADD4
RAMADD14
RAMADD3
RAMADD11
RAMADD2
RAMADD10
RAMADD6RAMADD5
RAMADD12
RAMADD7RAMADD1
RAMADD13RAMADD9
RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]
RAMVREF
RAMCLK
RAMADD[14..0]
RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]RAMDAT[15..0]
SDASCL
XFWRXFWRXFWRXFWRXFWRXFWRXFWRXFWRXFWRXFWRXFWRXFWRNWPNWPNWPNWPNWPNWPNWPNWPNWPNWPNWPNWP
XFRESCEXFRESCEXFRESCEXFRESCEXFRESCEXFRESCEXFRESCEXFRESCEXFRESCEXFRESCEXFRESCEXFRESCE
XFRESBSYXFOEXFOEXFOE
CLEALE
FD1
FD5
FD2
FD4
FD7FD6
FD0
FD3
SESE
RAMLDMXRAMWEXRAMCASXRAMRAS RAMCKEN
RAMCLKXRAMCLKRAMUDM
XRAMCS
RAMVREF
RAMDAT[15..0]
RAMADD[14..0]
RAMLDQS RAMUDQS
2_5VCC_DDR
SDASCL
XFRESCE
XFRESBSY
FD[7..0]
CLEALE
XFWRNWP
XFOE
SE
3_3VCC_COACH
RAMVREF
2_5VCC_DDR
2_5VCC_DDR2_5VCC_DDR
2_5VCC_DDR
3_3VCC_COACH
3_3VCC_COACH
3_3VCC_COACH3_3VCC_COACH
Coach SIDE DDR SIDE
K33202
D_R
K33202
D_R
C_D209
0.1
C_D209
0.1
R_D217100R
R_D217100R
K33302
D_R
K3 3302
D_R
VDD1
DQ02
VDDQ3
DQ14
DQ25
VSSQ6
DQ37
DQ48
VDDQ9
DQ510
DQ611
VSSQ12
DQ713
NC14
VDDQ15
LDQS16
NC17
NC19VDD18
LDM20
WE21
CAS22
RAS23
CS24
NC25
BA026
BA127
AP/A1028
A029
A130
A231
A332
VDD33 VSS 34A4 35A5 36A6 37A7 38A8 39A9 40
A11 41A12 42NC 43
CKE 44CK 45 CK 46
UDM 47VSS 48
VREF 49NC 50
UDQS 51VSSQ 52
NC 53DQ8 54
VDDQ 55DQ9 56
DQ10 57VSSQ 58DQ11 59DQ12 60VDDQ 61DQ13 62DQ14 63VSSQ 64DQ15 65
VSS 66
U_D201
K4H511638C-UCB3
U_D201
K4H511638C-UCB3
R_D216 47KR_D216 47K
C_D206
0.1
C_D206
0.1
C_D211
0.1
C_D211
0.1
C_D2000.1
C_D2000.1
C_D208
0.1
C_D208
0.1
K33002
D_R
K330 02
D_R
VCC8
WP7
SCL6
GND 4SDA5A2 3A1 2A0 1
U_D203
M24C08-WDW6T(TSSOP-8)
U_D203
M24C08-WDW6T(TSSOP-8)
12
R_D21510K(1%)R_D21510K(1%)
C_D2010.1C_D2010.1
C_D205
0.1
C_D205
0.1
C_D207
0.1
C_D207
0.1
R_D204
33K
R_D204
33K
12
R_D21410K(1%)R_D21410K(1%)
C_D212
0.1
C_D212
0.1
C_D210
0.1
C_D210
0.1
K33102
D_R
K33102
D_R
I/O0 29I/O1 30I/O2 31I/O3 32
I/O4 41I/O5 42I/O6 43I/O7 44
CLE16
ALE17
WE18
WP19
R/B7
RE8
CE9
NC1
NC2
DNU3
NC4
NC5
NC6
DNU10
NC11
VCC12
VSS13
NC14
DNU15
NC20
NC21
DNU22
NC23
NC24 NC 25NC 26
NC 28
DNU 27
NC 33
NC 35
DNU 34
VSS 36VCC 37
NC 38
NC 40
DNU 39
NC 45
NC 47NC 48
DNU 46
U_D202
K9F5608UOC(WSOP1) NAND 256 Mb
U_D202
K9F5608UOC(WSOP1) NAND 256 Mb
C_D204
0.1
C_D204
0.1
3) MAIN_3
74
Ⅵ. CIRCUIT DIAGRAM
3VCC_CCD
CDATA0CDATA0CDATA1CDATA1CDATA2CDATA2CDATA3
CDATA4CDATA4CDATA5CDATA5CDATA6CDATA6CDATA7CDATA7
CDATA8CDATA8CDATA9CDATA9
CDATA10CDATA10CDATA10CDATA10CDATA11CDATA11
CCLK
RG
CCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUTCCDOUT
DV
DV
DV
DV
DV
DV
DV
DV
DV
DV
DH
DH
DH
DH
DH
DH
FEP_RST
SUB
KLC
PS
KLC
PS
SPCLK
AT
AD
PS
SPDATA
FEP_RST
CCLK
CDATA0CDATA0CDATA1CDATA1CDATA2CDATA2CDATA3
CDATA4CDATA4CDATA5CDATA5CDATA6CDATA6CDATA7CDATA7
CDATA8CDATA8CDATA9CDATA9
CDATA10CDATA10CDATA10CDATA10CDATA11CDATA11
SUBOUT
SUBCNTL1SUBCNTL
VDHD
1V
TS
V
A3V
B3V
A5V
7V
B5V
8V
9V
01V
4V
2V
6V
DLH
V
N7_5VCC_SENSOR
V9V9V9V9V9
V7V7V7V7V7
V5BV5BV5B
V2V2V2V2V2V2
V3AV3AV3AV3AV3A
V4V4V4V4V4
V1
H2A
H1B
V10
VHLD
VST
V8
V6
V5A
V3B
H1A
SUB
15VCC_SENSOR
CCDOUT
SUBCNTL1
SUBCNTL
CSUB
RG
H2B
H1A
H2A
H1B
H2B
3_3VCC_HR
TGVALAFEVAL
AT
AD
PS
AT
AD
PS
AT
AD
PS
LA
VG
T
N7_5VCC_CCD
3VCC_CCD
3_3VCC_HR
SPCLKSPDATA
FEP_RST
AFEVAL
CCLK
CDATA[11..0]
TGVAL
15VCC_CCD
SUBCNTL1SUBCNTL
HDVD
GND
DVDD
AVDD
HVDD
GND
GND
GND
GND
3VCC_CCD
3_3VCC_HR
N7_5VCC_CCD
15VCC_TG
HVDD
AVDD
VDD
VDD
VDD
DVDD
15VCC_TGN7_5VCC_TG
GNDGND
GND
GND
GND
GND
GND
15VCC_SENSOR
GND
GND
GND
GND
GND
GND
GND
GND
GND
15VCC_CCD
GND
15VCC_SENSOR 15VCC_CCDVDD
GND
15VCC_TG
N7_5VCC_SENSOR
N7_5VCC_TG
VDD
GND
GND
GND
GND
GND
N7_5VCC_SENSOR15VCC_SENSOR
GND
GND
GNDGND GND
GND
GND
GND
GND GND GND GND
CCD Power1
CCD POWER PART
LA
VE
FA
TP_F305 SHD1TP_F305 SHD1
2
13
Q_F303KTC4082(UMT3)Q_F303KTC4082(UMT3)
1 2
FB_F302BLM18AG601SN1(1)FB_F302BLM18AG601SN1(1)
R_F306 10RR_F306 10R
C_F352
10/16V(3)
C_F352
10/16V(3)
C_F3381(1)
C_F3381(1)
C_F325 0.1C_F325 0.1
C_F307 0.1C_F307 0.1
C_F353
10/16V(3)
C_F353
10/16V(3)
1 2
FB_F300BLM18AG601SN1(1)FB_F300BLM18AG601SN1(1)
R_F310 33KR_F310 33K
C_F302
0.1/16V
C_F302
0.1/16V
1 2
FB_F307BLM18PG181SN1(1)FB_F307BLM18PG181SN1(1)
K01223
F_R
K01223
F_R
C_F327
0.1
C_F327
0.1
R_F3051K3 R_F3051K3
R_F333 OpenR_F333 Open
C_F332
OPEN
C_F332
OPEN
R_F316 100RR_F316 100R
C_F310
0.1
C_F310
0.1
CX14
CX2 2
GND 3
GND1
X_F301 36MHz(FCX-04)X_F301 36MHz(FCX-04)
R_F321
0R
R_F321
0R
R_F326
10K
R_F326
10K
1KL
CP
S003
F_P
T1
KLC
PS
003F_
PT
2
13
Q_F301DTC114YE(EMT) / KRC407EQ_F301DTC114YE(EMT) / KRC407E
C_F3000.1/16VC_F3000.1/16V
R_F302
1M
R_F302
1M
R_F330 OpenR_F330 Open
C_F316
0.1
C_F316
0.1
R_F312 47RR_F312 47R
R_F313 0RR_F313 0R
1 2
FB_F304BLM18AG601SN1(1)FB_F304BLM18AG601SN1(1)
C_F335
0.1
C_F335
0.1
C_F312
0.1
C_F312
0.1
C_F334
0.1
C_F334
0.1
R74913
F_R
R 7491 3
F_R
1 2R341 0R(1)R341 0R(1)
C_F328
0.1
C_F328
0.1
C_F336
0.1
C_F336
0.1
R_F325 0RR_F325 0R
C_F301
0.1/16V
C_F301
0.1/16V
GNDTG1
V93
V75
V5B7
V49
V3A11
V213
V115
GNDCCD17
GNDCCD19
VL21
SUB23
GNDTG25
H1A27
H1B29
GNDTG31
GNDTG33
V10 2
V8 4
V6 6
V5A 8
V3B 10
VHLD 12
VST 14
GNDCCD 16
CCDOUT 18
GNDCCD 20
VDD 22
CSUB 24
H2A 26
GNDTG 28
H2B 30
RG 32
FIX1 34
FIX2 35
CN_F301
54809-3398
CN_F301
54809-3398
C_F3421(1)
C_F3421(1)
K01103
F_R
K01103
F_R
R_F329 OpenR_F329 Open
C_F339
1(1)
C_F339
1(1)
R_F308 10RR_F308 10R
R_F309 10RR_F309 10R
C_F319
0.01
C_F319
0.01
C_F3201(1)
C_F3201(1)
12
FB_F303BLM18AG601SN1(1)
FB_F303BLM18AG601SN1(1)
C_F3400.1C_F3400.1
TC_F305
47/6.3V(A)
TC_F305
47/6.3V(A)
D_F300 KDS160(ESC)D_F300 KDS160(ESC)
1V
2E
2V
4F
3V
2F
4V
4G
5V
0 1B
6V
7D
7V
9B
8V
8B
9V
7B
0 1V
6B
11V
11B
21V
01D
3 1V
2D
41V
4E
LV
8D
HV
9D
MV
01E
SHD N11
MCKO D13
OSCI F13
OSCO G13
CKI J13
CLPOB N12
ADCLK M7
PBLK K8
LS
GS
S2J
PX
E/DI
2B
1S
SV
1L
2S
SV
5K
3S
SV
6M
4S
SV
8M
5S
SV
9K
6S
SV
21L
7S
SV
21H
8S
SV
2 1E
9S
SV
4B
1S
SV
D6
A
DVDD1 A7
DVDD2 K4
DVDD3 M3
PVDD1L2
PVDD2M2
PVDD3M5
PVDD4K6
D0 A4
D1 A3
D2 A2
D3 B1
D4 C1
D5 D1
D6 E1
D7 F1
D8 G1
D9 H1
D10 J1
D11 K1
XSHP M9
XSHD M11
ADCLKI N7
PBLKI K7
CLPOBI N8
SHP N9
1K
CS
5B
1N
ES
6D
1IS
S5
D
2N
ES
01A
2IS
S9
A
2K
CS
8A
AVDDF10
7D
DV
21J
6D
DV
4D
5D
DV
21C
4D
DV
21G
3D
DV
21M
RGM1
H1N2
RH
31B
H2N3
H3N5
H4N6
SUBG2
R1H13
C2F12
C1AK13
C1BL13
C3E13
OS
2H
CCDINM13
TS
R2
C
TS
RT
21A
RV
31C
DLF/
NE
W3
B
AVSS1K10
AVSS2B12
3S
SV
D4
M
TEST4K12
TEST1J4
TEST3H10
TEST2K2
1D
DV
4H
2D
DV
4N
OP
G2 1
D
01S
SV
01J
2S
SV
D5
A
PVDD5N10
TU
OT
01G
AFTESTM10
MON A11
U_F301
CXD4805GA
U_F301
CXD4805GA
C_F351
10/16V(3)
C_F351
10/16V(3)
R_F307 10RR_F307 10R
C_F3410.1
C_F3410.1
1A
TA
DP
S203
F_P
T1
AT
AD
PS
203F_
PT
C_F3180.1
C_F3180.1
12
FB_F301BLM18AG601SN1(1)
FB_F301BLM18AG601SN1(1)
C_F331
0.1
C_F331
0.1
1 2FB_F306 BLM18AG601SN1(1)FB_F306 BLM18AG601SN1(1)
R_F304 33RR_F304 33R
2
13
Q_F302DTC114YE(EMT) / KRC407EQ_F302DTC114YE(EMT) / KRC407E
R_F315 0RR_F315 0R
C_F3179PC_F3179P
R_F303
100K
R_F303
100K
C_F305
0.1
C_F305
0.1
TC_F30333/6.3V(A)TC_F30333/6.3V(A)
C_F333
0.1
C_F333
0.1
C_F354
10/16V(3)
C_F354
10/16V(3)
TC_F30133/6.3V(A)TC_F30133/6.3V(A)
C_F321
0.1
C_F321
0.1
R_F3111K3 R_F3111K3
C_F306 0.1C_F306 0.1
C_F330
1(1)
C_F330
1(1)
C_F329
0.01
C_F329
0.01
R_F314 1K(1%)R_F314 1K(1%)
R_F327 1KR_F327 1K
12345
678
RA_F303100Rx4RA_F303100Rx4
TC_F308100/10V(B)(Conformal)
TC_F308100/10V(B)(Conformal)
C_F304
0.1
C_F304
0.1
C_F314
0.1
C_F314
0.1
R_F324 0RR_F324 0R
LA
VG
T103
F_P
TL
AV
GT
103F_
PT
12345
678
RA_F302100Rx4RA_F302100Rx4
TP_F306 ADCLK1TP_F306 ADCLK1
12345
678
RA_F301100Rx4RA_F301100Rx4
C_F3249PC_F3249P
C_F311
0.1
C_F311
0.1
C_F308 0.1C_F308 0.1
C_F3030.1/50V(1)C_F3030.1/50V(1)
C_F3451/25V(2)C_F3451/25V(2)
R_F332 OpenR_F332 Open
TP_F311AFEVALTP_F311AFEVAL
TP_F304 SHP1TP_F304 SHP1
C_F309
1n
C_F309
1n
C_F323 1nC_F323 1n
C_F313
0.1
C_F313
0.1
R74023
F_R
R74023
F_R
C_F337
1(1)
C_F337
1(1)
C_F315
0.1
C_F315
0.1
R_F3184K7R_F3184K7
4) MAIN_4
75
Ⅵ. CIRCUIT DIAGRAM
USBDPUSBDNUSBVBUS
LINEOUTCVBSVJ_DETN
NTSC
USBDP
USBDN
VBUS
CVBSNTSC
MICP MICPMICPMICPMICP MICPMICPMICP
VJ_DET
USBDN_O
NTSC
USBDP_O
VJ_DETNVJ_DETN
MICNMICN
CHARGER_ID
BLEDPBLEDN
LCDDAT7LCDDAT6LCDDAT5LCDDAT4LCDDAT3LCDDAT2LCDDAT1LCDDAT0
LINEOUT
USBVBUS
LINEOUT_O
CHARGER_ID CHARGER_ID
LCDCLK
CHARGER_ID
FA21FA21
BAT_ID
VCC
USBDPUSBDNUSBVBUS
LINEOUT
MICPMICN
CVBS
5VCC
VJ_DETN
CHARGER_ID
BLEDPBLEDN
LCDDAT[7..0]
LCD_RST
LCDCLKHSYNCVSYNC
SEN
SCKSDAT
BAT_ID
FA21
BAT_ID
VCC5VCC
3_3VCC_COACH
5VCC
VCC
3_3VCC_LCD
3_3VCC_LCD
BAT+
BAT-
3_3VCC_MAIN
BAT+
BAT-
Power
MIC
<Cradle Connector>
connect to Coach Block
Power Supply
LCD PART
CHARGER_ID
LINEOUT_ONTSCVJ_DETUSBDN_O
USBDP_OVBUS
BAT_ID
C_L427 4U7/6.3V(1)C_L427 4U7/6.3V(1)
TP_L400
BAT_PTP_L400
BAT_P
V_L410ICVN0518X400V_L410ICVN0518X400
12345678910111213141516171819202122232425
26
49045-0011
CN_L401
49045-0011
CN_L401
004X8150
NV
C I504L_
V00 4
X81 50N
VC I
504L_V
C_L414 1(1)C_L414 1(1)
12
CN_MIC401
MIC
CN_MIC401
MIC
1 2
FB_L407BLM21PG331SN1(2)FB_L407BLM21PG331SN1(2)
TP_L401BAT_N
TP_L401BAT_N
TP_L405
BAT+TP_L405
BAT+
1254
3
6U_L402KRX203E
U_L402KRX203E
1.0134L_
C1.0
134 L_C
C_L4234U7/6.3V(1)C_L4234U7/6.3V(1)
C_L426 4U7/6.3V(1)C_L426 4U7/6.3V(1)
C_L416
)1(V3.6/7
U4
C_L416
)1(V3.6/7
U4
00 4X 8150
NV
CI40 4L_
V00 4
X 8150N
VCI
40 4L_V
1 2
FB_L403BLM18BB221SN1(1)FB_L403BLM18BB221SN1(1)
C_L429 4U7/6.3V(1)C_L429 4U7/6.3V(1)
12
R_L408
33K
R_L408
33K
C_L417
)1(V3.6/7
U4
C_L417
)1(V3.6/7
U4
1 2
FB_L405BLM18BB221SN1(1)FB_L405BLM18BB221SN1(1)
004X8150
NV
CI10 4L_
V00 4
X 8150N
VCI
10 4L_V
30 4P
TC
NY
SV
30 4P
TC
NY
SV
12
D_L401KDR720ED_L401KDR720E
TP_L402TP_L402
004X8150
NV
CI304L_
V004
X 8150N
VCI
304L_V
12
R_L42327K(1%)R_L42327K(1%)
2
13
Q_L402
DTC114YE(EMT) / KRC407E
Q_L402
DTC114YE(EMT) / KRC407E
C_L430 4U7/6.3V(1)C_L430 4U7/6.3V(1)
R_L401 0RR_L401 0R
R_L405 10KR_L405 10K
V_L407ICVN0518X400V_L407ICVN0518X400
C_L4221/25V(2)C_L4221/25V(2)
C_L4040.1C_L4040.1
C_L412
4U7/6.3V(1)
C_L412
4U7/6.3V(1)
004X8150
NV
CI2 04L_
V004
X 815 0N
VCI
2 04L_V
F_V401FHC16(1)F_V401FHC16(1)
12
E027R
DK
304 L_D
E027R
DK
304 L_D
FIX1 50
FIX2 51
LED+1
LED-2
C11+3
GND14
RESET5
CS6
SDI7
SCL8
VSYNC9
COTCLK11HSYNC10
PD712
PD613
PD514
PD415
PD316
PD217
PD118
PD019
VCC20
RVDD21
C1122
NC__VC123
VDCI24
VCOMH25
GND226
VCOML27
C23-28
C23+29
C22-30
C22+31
VDD232
C21-33
C21+34
C12+35
C12-36
GND337
VGL38
VGH39
DE40
VCI41
CRTEST42
VGM43
VS44
VCL45
C32-46
C31-47
C31+48
C32+49
CN_L402
54809-4998
CN_L402
54809-4998
2
13
Q_L401UMT2907(UMT) / KTN2907AUQ_L401
UMT2907(UMT) / KTN2907AU
V_L406ICVN0518X400
V_L406ICVN0518X400
C_L425 3U3/10V(2)C_L425 3U3/10V(2)
C_L421
1/25V(2)
C_L421
1/25V(2)
C_L409
680P
C_L409
680P
404P
TC
NY
SH
404P
TC
NY
SH
1 2
FB_L401BLM18BB221SN1(1)FB_L401BLM18BB221SN1(1)
C_L411
0.1
C_L411
0.1
C_L401 0.1C_L401 0.1
C_L413 1(1)C_L413 1(1)
C_L40310PC_L40310P
C_L424 0.1C_L424 0.1
R_L40633KR_L40633K
12C_L405 22PC_L405 22P
12
D_L402KDR720ED_L402KDR720E
TP_L406BAT-
TP_L406BAT-
C_L40210PC_L40210P
504P
TKL
CD
CL504
PT
KLC
DCL
1 2FB_L408BLM21PG331SN1(2)FB_L408BLM21PG331SN1(2)
C_L415
)1(V3.6/7
U4
C_L415
)1(V3.6/7
U4
C_L418
)1(V3.6/7
U4
C_L418
)1(V3.6/7
U4
C_L408
150P
C_L408
150P
R_L422 100KR_L422 100K
1 2R_L403 47nHR_L403 47nH
1 2R_L402 47nHR_L402 47nH
V_L408ICVN0518X400V_L408ICVN0518X400
S4
D35
D46 D1 1
G 3
D2 2
U_L401
SSM6J50TU
U_L401
SSM6J50TU
12FB_L4064u7(1) FB_L4064u7(1)
R_L404 0RR_L404 0R
C_L406330PC_L406330P
C_L4101(1)C_L4101(1)
C_L419 1(1)C_L419 1(1)
V_L409ICVN0518X400V_L409ICVN0518X400
1 2
FB_L404BLM18PG181SN1(1)FB_L404BLM18PG181SN1(1)
C_L428 4U7/6.3V(1)C_L428 4U7/6.3V(1)
1 2
34L_L401DLP11SN900SL2L_L401DLP11SN900SL2
12
R_L40775R(1%)R_L40775R(1%)
C_L420 4U7/6.3V(1)C_L420 4U7/6.3V(1)
C_L407270P
C_L407270P
1 2
FB_L402BLM18BB221SN1(1)FB_L402BLM18BB221SN1(1)
5) MAIN_5
76
Ⅵ. CIRCUIT DIAGRAM
PWR_KEY
PLAY_ON
POWER_ON
PWRON
LEFTLEFTLEFTLEFT
DOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWN
EFFECT
ENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTER ENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTER ENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTER ENTERENTERENTERENTERENTERENTER
TELETELETELETELETELETELETELETELETELETELETELETELETELETELETELETELE
WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDEWIDEWIDE WIDEWIDEWIDEWIDEWIDEWIDE
LEFTLEFTLEFTLEFTLEFT LEFTLEFTLEFTLEFT LEFTLEFTLEFTLEFTLEFT LEFTLEFTLEFTLEFT LEFTLEFT LEFTLEFT LEFTLEFTLEFT LEFTLEFTLEFT LEFTLEFTLEFTLEFTLEFTLEFTLEFTLEFT
DELDELDELDELDELDELDEL DELDELDELDELDEL DELDELDELDELDELDELDEL DELDELDELDELDEL
UPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUP
DOWNDOWNDOWNDOWNDOWNDOWNDOWNDOWN
UPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUP
WIDE
DELDEL
TELE
LEFTLEFTLEFTLEFTLEFT LEFTLEFTLEFTLEFT LEFTLEFTLEFTLEFTLEFT LEFTLEFTLEFTLEFT
UPUPUPUPUPUPUPUPUPUPUPUPUPUPUPUP
DOWNDOWNDOWNDOWN
ENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTER ENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTER ENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTER
RIGHTRIGHT
PWR_KEY
PLAY_ON
PWRON
POWER_ON
KEY_IN1
3_3VCC_MAIN
DEL
WIDE
TELE
SH1
EFFECT
SPKRP1SPKRN1
FD(1)FD(2)
FCLKFD(0)SDCD
RC_CNTRC_ON
XFEXTCE1FD(3)
SD_WP
SH2
MODE_KEY
PWR_KEY
PWR_KEY
VDDPWR
3_3VCC_MAINVDDPWR
3_3VCC_ADC
3_3VCC_ADC
3_3VCC_ADC
3_3VCC_MAIN
3_3VCC_ADC VDDPWR
3_3VCC_COACH VDDRTC 5VCC
MODE KEY CONNECTOR
FRONT PCB CONNECTOR
PLAY_KEY
12
R_K501
33K33K
C_K516
0.047
C_K516
0.047
1 2R_K520 100RR_K520 100R
R_K51115KR_K51115K
C_K5060.1
C_K5060.1
C_K5010.1
C_K5010.1
C_K509
0.047
C_K509
0.047
V_K506ICVN0518X400V_K506ICVN0518X400
V_K513
004
X815
0N
VC I
V_K513
004
X815
0N
VC I
R_K5133K9R_K5133K9
R_K50615KR_K50615K
FB_K505 BLM15BB121SN1FB_K505 BLM15BB121SN1
R_K51215KR_K51215K
1 2R_K519 100RR_K519 100R
1 3SW_K510 SOT-152HSTSW_K510 SOT-152HST
12345678910111213141516
17 G1G2
CN_K502
54548-1570
G1G2
CN_K502
54548-1570
V_K503ICVN0518X400V_K503ICVN0518X400
1 3SW_K508 SOT-152HSTSW_K508 SOT-152HST
1 2R_K517 100RR_K517 100R
FB_K504 BLM15BB121SN1FB_K504 BLM15BB121SN1
1 3SW_K503 SOT-152HSTSW_K503 SOT-152HST
123456789101112
1314
CN_K501
54548-1270
CN_K501
54548-1270
R_K52111KR_K52111K
C_K510
0.047
C_K510
0.047
1 3SW_K509 SOT-152HSTSW_K509 SOT-152HST
15
2
34
Q_K503
EMG5T2R(EMT5) / KRC657E
Q_K503
EMG5T2R(EMT5) / KRC657E
C_K503
0.1
C_K503
0.1
1 3SW_K504 SOT-152HSTSW_K504 SOT-152HST
C_K515
0.047
C_K515
0.047
FB_K503 BLM15BB121SN1FB_K503 BLM15BB121SN1
V_K507
004
X815
0N
VC I
V_K507
004
X815
0N
VC I
V_K501ICVN0518X400V_K501ICVN0518X400
R_K52233KR_K52233K
1 2R_K516 100RR_K516 100RV_K502ICVN0518X400V_K502ICVN0518X400
1 2
R_K500 10KR_K500 10K
V_K512
004
X815
0N
VC I
V_K512
004
X815
0N
VC I
1 3SW_K505 SOT-152HSTSW_K505 SOT-152HST
R_K5146K2R_K5146K2
C_K514
0.047
C_K514
0.047
C_K511
0.047
C_K511
0.047
FB_K502 BLM15BB121SN1FB_K502 BLM15BB121SN1
15
2 34
Q_K501KTC601EQ_K501KTC601E
C_K518
0.047
C_K518
0.047
12
R_K502
10K
R_K502
10K
1 3SW_K501 SOT-152HSTSW_K501 SOT-152HST
C_K5130.047C_K5130.047
FB_K501 BLM15BB121SN1FB_K501 BLM15BB121SN1
12
R_K503
4K7
R_K503
4K7
V_K508
004
X815
0N
VC I
V_K508
004
X815
0N
VC I
V_K515
004
X815
0N
VCI
V_K515
004
X815
0N
VCI
V_K511
004
X815
0N
VC I
V_K511
004
X815
0N
VC I
R_K50715KR_K50715K
1 2R_K515 100RR_K515 100R
31
SW_K502
PLAY_KEY
SW_K502
PLAY_KEY
1 3SW_K506 SOT-152HSTSW_K506 SOT-152HST
C_K517
0.047
C_K517
0.047
TP501TP501
V_K504ICVN0518X400V_K504ICVN0518X400
V_K510ICVN0518X400V_K510ICVN0518X400
V_K509
004
X815
0N
VC I
V_K509
004
X815
0N
VC I
C_K504
1(1)
C_K504
1(1)
1 3SW_K507 SOT-152HSTSW_K507 SOT-152HST
V_K505ICVN0518X400
V_K505ICVN0518X400
V_K514
004
X815
0N
VCI
V_K514
004
X815
0N
VCI
R_K50815KR_K50815K
12
R_K504
4K7
R_K504
4K7
12
J_K501
SPEAKER
J_K501
SPEAKER
C_K5020.1
C_K5020.1
1 2R_K518 75RR_K518 75R
C_K505
1(1)
C_K505
1(1)
6) MAIN_6
77
Ⅵ. CIRCUIT DIAGRAM
EIP
Z
ER
PZ
ER
PZ
ER
PZ
ER
PZ
ER
PZ
ER
PZ
ZPIZPIZPIZPIZPIZPIZPIZPIZPIZPIZPIZPI
EIP
FA
AFPIAFPIAFPIAFPIAFPIAFPIAFPIAFPIAFPIAFPIAFPIAFPIAFPI_CNT
ZPRZPRZPRZPRZPRZPRZPRZPRZPRZPRZPRZPR
ZPI_CNT
ZPR_CNT
CIP
FA
CR
PZ
CIP
Z
FOCUS0FOCUS0FOCUS1FOCUS1
FOCUS3FOCUS3FOCUS2FOCUS2
IRIS1IRIS0
SHUTT0SHUTT1
AFM_BN
AFM_AP
AFM_BPAFM_BP
4_5VCC_MOT
VCC_LOGICVCC_LOGICVCC_LOGICVCC_LOGICVCC_LOGICVCC_LOGICVCC_LOGIC
AFPICAFPIE
ZPRC
ZPRESHT_C_SI01
SHT_C_SI02IRIS0_AN_ST2IRIS1_AP_ST1
AFM_BPAFM_ANAFM_APAFM_BNZPIE
ZPICZM_IN_PZM_OUT_N
AFM_AN AFM_AN
SHT_C_SI02SHT_C_SI02SHT_C_SI02
SHT_C_SI01
IRIS0_AN_ST2IRIS1_AP_ST1
M_PS
3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN3_3VCC_MAIN
3VCC_MOT
ZM_IN_PZM_IN_PZM_IN_PZM_OUT_NZM_OUT_N
ZOOM0ZOOM0ZOOM1ZOOM1
ZPI
AFPI_CNT
ZPR
AFPI
ZPR_CNT
ZPI_CNT
3_3VCC_MAIN
4_5VCC_MOT
3VCC_MOT
M_PS
FOCUS[3..0]SHUTT[1..0]
IRIS[1..0]
ZOOM[1..0]
3_3VCC_MAIN
3VCC_MOT
3_3VCC_MAIN
4_5VCC_MOT
3VCC_MOT
3VCC_MOT
3VCC_MOT
4_5VCC_MOT
3VCC_MOT
3VCC_MOT
R_M601 0RR_M601 0R
C_M606
0.1
C_M606
0.1
11
22
33
44
55
77
88
99
1010
1111
1212
1313
1414
1515
1616
1717
1818
66
1919
2020
2121
CN_M601
54548-1970
CN_M601
54548-1970
R_M616
180R
R_M616
180R
R_M607
1R(1%)(1)
R_M607
1R(1%)(1)
D_M602
KDS160(ESC)
D_M602
KDS160(ESC)
7K4
316M_
R7
K 4316
M _R
C_M605
1(1)
C_M605
1(1)
R_M602 15KR_M602 15K
11
22
33 4 4
5 5
Q_M601
EMG5T2R(EMT5) / KRC657E
Q_M601
EMG5T2R(EMT5) / KRC657E
R_M609 15KR_M609 15K
7K4
216M_
R7
K 4216
M _R
R_M614
180R
R_M614
180R
R_M620
10K
R_M620
10K
IN1B1
IN2A2
IN2B3
VCC4
GND5
IN3A6
IN3B7
IN4A8
IN4B9
1K
RB
01
2K
RB
11
A3T
UO
21
B3T
UO
31
2M
V41
2D
NG
P5 1
A4T
UO
61
B4T
UO
71
2LE
S81
VLIM 19VREF 20
OUT5A 21SENSE 22
RNF 23VM3 24
OUT5B 25IN5 26
EN1 27
1LE
S82
A1T
UO
92B1
TU
O03
1M
V13
1D
NG
P23
A2T
UO
33B2
TU
O4 3
SP
5 3A1
NI63
U_M601
BD6758KN
U_M601
BD6758KN
C_M600
1(1)
C_M600
1(1)
11
22
33 4 4
5 5
Q_M602
EMG5T2R(EMT5) / KRC657E
Q_M602
EMG5T2R(EMT5) / KRC657E
C_M601
1(1)
C_M601
1(1)
D_M601
KDS160(ESC)
D_M601
KDS160(ESC)
C_M604
1(1)
C_M604
1(1)
FB_M600BLM18PG181SN1(1)FB_M600BLM18PG181SN1(1) R_M606
1R(1%)(1)
R_M606
1R(1%)(1)
11
22
33 4 4
5 5
Q_M603
EMG5T2R(EMT5) / KRC657E
Q_M603
EMG5T2R(EMT5) / KRC657E
C_M603
1(1)
C_M603
1(1)
D_M603
KDS160(ESC)
D_M603
KDS160(ESC)
R_M604 11K(1%)R_M604 11K(1%)
R_M61918K
R_M61918K
R_M618
10K
R_M618
10K
C_M602
0.1
C_M602
0.1
R_M605
1K(1%)
R_M605
1K(1%)
7K4
016M_
R7
K4016
M_R
R_M615
180R
R_M615
180R
TC_M600
68/6.3V(A)(Conformal)
TC_M600
68/6.3V(A)(Conformal)
7) MAIN_7
78
Ⅵ. CIRCUIT DIAGRAM
PW_SW
38_FBHLED
11_FBAFE11_FBAFE11_FBAFE11_FBAFE 23_FBAUX
25_FBINV 42_FBSU
2_FBM
26_FBBST26_FBBST
12_FBSD12_FBSD
CCD_CNT3
US
BF_24
25_FBINV25_FBINV25_FBINV25_FBINV25_FBINV25_FBINV
26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST26_FBBST
23_FBAUX
PW_SW
2_FBM
38_FBHLED
FE
R
CCD_CNT3
PW_SWPW_SW
XRESETXRESETXRESETXRESET
2_FBM
11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE11_FBAFE
11_FBAFE
12_FBSD12_FBSD12_FBSD
12_FBSD 26_FBBST
25_FBINV
REFREFREFREFREF
BAT_CHK
XRESET
3VCC_CCD
3_3VCC_HR
VDDPWR
3_3VCC_AUD
3VCC_MOT
CCD_CNT1
CCD_CNT2
VCC
PW_SW
5VCC_STROBO
5VCC_LED
BLEDN
BLEDP
BL_CNT1
15VCC_CCD
4_5VCC_MOT
CCD_CNT3
N7_5VCC_CCD
1_8VCC_MAIN
2_5VCC_MAIN
3_3VCC_MAIN
BAT_CHK
GNDPOWER
3_3VCC_LCD
3VCC_MOT
3_3VCC_AUD
3_3VCC_MAIN
1_8VCC_MAIN
VCC
3VCC_CCD
2_5VCC_MAIN
3_3VCC_MAIN
3_3VCC_HR
VCC
3_3VCC_MAIN
5VCC_STROBO
5VCC_LED
5VCC
VCC
BLEDP
BLEDN
BLEDP 5VCC
15VCC_CCD
15VCC_CCD
VCC
VCC4_5VCC_MOT
N7_5VCC_CCD
1_8VCC_MAIN
2_5VCC_MAIN
VCC
2_5VCC_MAIN
VCC
2_5VCC_MAIN
3_3VCC_MAIN
3_3VCC_LCD
2_5VCC_MAIN 3_3VCC_MAIN 1_8VCC_MAIN
N7_5VCC_CCD
5VCC
VCC
VCC
4_5VCC_MOT
3_3VCC_MAIN
VCC VDDPWR
3_3VCC_MAIN
4_5VCC_MOT
TP1302_5VCC_MAINTP1302_5VCC_MAIN
R_P718330K(1%)R_P718330K(1%)
C_L73210/10V(2)C_L73210/10V(2)
1
2
3
5
4
U_P702
UMC2N(UMT5) / KRX103U
U_P702
UMC2N(UMT5) / KRX103U
TP11915VCC_CCD
TP11915VCC_CCD
R_P726 10KR_P726 10K
R_P70362K(1%)R_P70362K(1%)
FB_P703
BLM18PG181SN1(1)
FB_P703
BLM18PG181SN1(1)
R_P7091R(1%)R_P7091R(1%)
L_P702
A993AS-100M
L_P702
A993AS-100M
C_L707
10/10V(2)
C_L707
10/10V(2)
R_P741OPEN
R_P741OPEN
C_L7220.1C_L7220.1
R_P716180K(1%)R_P716
180K(1%)
C_L7121(1)C_L7121(1)
TP1293_3VCC_HRTP1293_3VCC_HR
R_P730 10KR_P730 10K
C_L74122/10V(3)C_L74122/10V(3)
L_P703 A993AS-100ML_P703 A993AS-100M
R_P70827K(1%)R_P70827K(1%)
R_P74010K
R_P74010K
TC_P70347/6.3V(A)TC_P70347/6.3V(A)
R_P71110R(1%)R_P71110R(1%)
TP_P701XRST1TP_P701XRST1
R_P715 10KR_P715 10K
TP126BLEDPTP126BLEDP
R_P734 0R(1)R_P734 0R(1)
L_P705
A993AS-100M
L_P705
A993AS-100M
L_P700 A993AS-4R7ML_P700 A993AS-4R7M
Cathode3NC 1
Anode 2
U_P703
KDR521T(SOT23)
U_P703
KDR521T(SOT23)
R_P70651K(1%)R_P70651K(1%)
Vin3
Vout 2
GND 1
U_P709
AAT3220IGY-3.0(SOT23-3)
U_P709
AAT3220IGY-3.0(SOT23-3)
)%1(
K001417
P_R
)%1(
K001417
P_R
INVOK/1
FBM2
ONM3
PVM4
LXM5
PGM6
PGAFE7
LXAFE8
PVAFE9
ONAFE10
DS
VP
31
XU
AN
O41
DS
NO
51
DS
XL61
DS
GP
71
1G
P81
XU
AV
RD
91
VNI
VP
02
ONLED 36
PVLED 35
SWLED 34
LXLED 33
PG2 32
LXBST 31
SWBST 30
PVBST 29
GD 28
SEQCCD 27
TX
ER
93
DEL
HB
F83
DELL
BF
73
FBAFE11
FBSD12
VNI
XL12
DC
CN
O22
FBBST 26
FBINV 25
XU
AB
F32
XU
AC
C42
US
VP
44
TT
AB
54
US
BF
24
DN
G14
US
34
FE
R04
US
NO
64
US
XL74
US
GP
84
1D
NG
94
U_P701
MAX8611ETM+T
U_P701
MAX8611ETM+T
C_L72022/10V(3)C_L72022/10V(3)
TP1223VCC_CCDTP1223VCC_CCD
VIN1
GND2
EN3
VOUT 5
BP 4
U_P707
RT9167A-30PB
U_P707
RT9167A-30PB
1 2D_P702
RB501V-40
D_P702
RB501V-40
R_P717470K(1%)R_P717470K(1%)
FB_P701 BLM18PG181SN1(1)FB_P701 BLM18PG181SN1(1)
R_P70462K(1%)R_P70462K(1%)
TC_P700
100/6.3V(B)NEO
TC_P700
100/6.3V(B)NEO
C_L70810/10V(2)
C_L70810/10V(2)
R_P732 10KR_P732 10K
)1(05/1.0507L_
C)1(05/1.0
507L_C
C_L7261(1)
C_L7261(1)
C_L7161/16V(1)C_L7161/16V(1)
A3S2G1 D 5
C 4
U_P706
SSM5H05TU
U_P706
SSM5H05TU
C_L71322/10V(3)
C_L71322/10V(3)
FB_P700 BLM18PG181SN1(1)FB_P700 BLM18PG181SN1(1)
C_L7240.01C_L7240.01
R_P72333K(1%)R_P72333K(1%)
L_P704 A993AS-100ML_P704 A993AS-100M
C_L70910/16V(3)C_L70910/16V(3)
C_L7300.01C_L7300.01
C_L72710/10V(2)C_L72710/10V(2)
12D_P704
RB501V-40
D_P704
RB501V-40
R_P735 4K7R_P735 4K7
TP1233_3VCC_AUD
TP1233_3VCC_AUD
R_P70191K(1%)R_P70191K(1%)
TC_P7051/16V(A)TC_P7051/16V(A)
C_L7210.1C_L7210.1
R_P712 10KR_P712 10K
R_P733 4K7R_P733 4K7
FB_P702
BLM18PG181SN1(1)
FB_P702
BLM18PG181SN1(1)
C_L7341(1)C_L7341(1)
C_L703OPEN
C_L703OPEN
C_L7231/16V(1)C_L7231/16V(1)
C_L7360.01C_L7360.01
TP1253VCC_MOT
TP1253VCC_MOT
L_P720 A914BYW2R2ML_P720 A914BYW2R2M
R_P70782K(1%)R_P70782K(1%)
C_L71410/10V(2)
C_L71410/10V(2)
R_P731 10KR_P731 10K
R_P727100K(1%)R_P727100K(1%)
R_P72530K(1%)R_P72530K(1%)
C_L70410/10V(2)C_L70410/10V(2)
TP1285VCCTP1285VCC
R_P73810K
R_P73810K
C_L73510/10V(2)C_L73510/10V(2)
2
13
Q_P702DTC114YE(EMT) / KRC407EQ_P702DTC114YE(EMT) / KRC407E
C_L7171/16V(1)
C_L7171/16V(1)
IN1
GND2
EN3 BP 4
OUT 5U_P708
RT9193-33PB
U_P708
RT9193-33PB
R_P72947K(1%)R_P72947K(1%)
R_P737OPEN
R_P737OPEN
TC_P704
100/6.3V(B)NEO
TC_P704
100/6.3V(B)NEO
R_P70562K(1%)R_P70562K(1%)
L_P701
A993AS-100M
L_P701
A993AS-100M
1 2D_P703
RB501V-40
D_P703
RB501V-40
C_L74222/10V(3)C_L74222/10V(3)
R_P736 4K7R_P736 4K7
TP1313VCC_LCDTP1313VCC_LCD
2
13Q_P701
UMT2907(UMT) / KTN2907AUQ_P701
UMT2907(UMT) / KTN2907AU
IN1
GND2
EN3 BP 4
OUT 5U_P705
RT9193-30PB
U_P705
RT9193-30PB
TP1214_5VCC_MOT
TP1214_5VCC_MOT
R_P719120K(1%)R_P719120K(1%)
C_L718 0.01C_L718 0.01
C_L7061(1)C_L7061(1)
TP_P7001_8VCC_MAINTP_P7001_8VCC_MAIN
C_L71010/10V(2)
C_L71010/10V(2)
12
C_L7331(1)C_L7331(1)
R_P702120K(1%)R_P702120K(1%)
TC_P7071/16V(A)TC_P7071/16V(A)
C_L71110/16V(3)C_L71110/16V(3)
L_P706A914BYW6R8ML_P706A914BYW6R8M
TP127BLEDNTP127BLEDN
C_L72910/10V(2)C_L72910/10V(2)
R_P710 10KR_P710 10K
R_P713 10KR_P713 10K
C_L70222/10V(3)
C_L70222/10V(3)
R_P728300K(1%)R_P728300K(1%)
C_L728
1(1)
C_L728
1(1)
TP120N7_5VCC_CCD
TP120N7_5VCC_CCD
R_P72230K(1%)R_P72230K(1%)
C_L72510/10V(2)C_L72510/10V(2)
C_L70122/10V(3)
C_L70122/10V(3)
C_L7151/16V(1)C_L7151/16V(1)
R_P72436K(1%)R_P72436K(1%)
C_L7310.01C_L7310.01
8) MAIN_8
79
Ⅵ. CIRCUIT DIAGRAM
FLSHTRIGFLSHTRIGFLSHTRIGFLSHTRIGFLSHTRIGFLSHTRIG
FREADYCHARGE
AL_LED
IGBT_G
IGBT_GSLP
FLSHTRIGFLSHTRIG FLSHTRIG
AL_LED
AL_LED AL_LED
CHARGE CHARGE
FREADY
CHARGE_CON CHARGE_CON
CHARGE_CON
VCC
FLSHTRIG
FREADYCHARGE
AL_LED
5VCC_LED
5VCC_STROBO
3_3VCC_MAIN
GNDPOWER
CHARGE_CON
5VCC_LED
VCC
5VCC_STROBO
5VCC_LED 5VCC_STROBO
VCC
3_3VCC_MAIN
3_3VCC_MAIN
1.5PAI
1.5PAI
<Control>
110U/320WVCAPACITOR
MAIN CONDENSOR
<Power>
R_S80747K
R_S80747K
R_S818
1K
R_S818
1K
TP_S807 SLPTP_S807 SLP
R_S81147R
R_S81147R
12FB_S801 BLM18PG181SN1(1)FB_S801 BLM18PG181SN1(1)
1 2
3
D_S801 GSD2004SD_S801 GSD2004SC_S801
0.1
C_S801
0.1
C_S803
1/(1)
C_S803
1/(1)
SLPTP_S801
SLPTP_S801
IGBT_GTP_S803
IGBT_GTP_S803
C_S802
0.1
C_S802
0.1
R_S80910K
R_S80910K
C_S806
22/10V(3)
C_S806
22/10V(3) E1
E2
E3
E4
E 6
E 5
U105
W03-073
U105
W03-073
C_S805
330P
C_S805
330P
31
2Q_S811
DTA114YE(EMT) / KRA307E
Q_S811
DTA114YE(EMT) / KRA307E
C_S807
10/10V(2)
C_S807
10/10V(2)
R_S825 47KR_S825 47K
R_S80357K6(1%)
R_S80357K6(1%)
R_S815
47R
R_S815
47R
Rref1
Vbatt2
RFB3
Vcc4
GND5 SW 6SEC 7
Done 8Charge 9
Ct 10U106
LT3420-1
U106
LT3420-1
R_S814100R
R_S814100R
R_S810OPENR_S810OPEN
R_S806
47K
R_S806
47K
32
1Q_S809
DTA114YE(EMT) / KRA307E
Q_S809
DTA114YE(EMT) / KRA307E
31
2
Q_S810DTA114YE(EMT) / KRA307E
Q_S810DTA114YE(EMT) / KRA307E
R_S8052K(1%)R_S8052K(1%)
S 4
D 3
G2 S 1
D 6G5
Q_S804
SSM6L05FU
Q_S804
SSM6L05FU
2
31 Q_S814
DTC114YE(EMT) / KRC407EQ_S814DTC114YE(EMT) / KRC407E
TP118TP118
R_S804510R(1%)R_S804510R(1%)
R_S8164K7
R_S8164K7
TP_S808 IGBT_GTP_S808 IGBT_G
C_S804
0.1
C_S804
0.1
TP_S805 SVCCTP_S805 SVCC
SVCCTP_S800
SVCCTP_S800
R_S8131K
R_S8131K
TP_S806 XGNDTP_S806 XGND
R_S80847K
R_S80847K
R_S821 0RR_S821 0R
R_S817 2K2R_S817 2K22
31
Q_S806UMT3904 / 2N3904UQ_S806UMT3904 / 2N3904U
R_S8020R
R_S8020R
XGNDTP_S802
XGNDTP_S802
9) MAIN_9
80
Ⅵ. CIRCUIT DIAGRAM
10) MODE
MODE_KEY
SH2
SH1
SH2
SH1
PWR_KEY
VDDPWR
3_3VCC_ADC
3_3VCC_ADC
CD
A_C
CV3_3
RW
PD
DV
CD
A_C
CV3_3
SH2
SH1
MODE_KEY
PWR_KEY
2H
S
1H
SY
EK_
RW
P
YE
K _E
DO
M
12
R8
10K
R8
10K
2 B 3C
1 A 4D
SW1
EVQ3PRA09
SW1
EVQ3PRA09
1 2 3 4 5 6 7 8 9 01 11 21
J1
FPCB-54550
J1
FPCB-54550
E2
ICVL1018101A400
E2
ICVL1018101A400
R2 150K(1%)R2 150K(1%)R3 75K(1%)R3 75K(1%)
12
R7
10K
R7
10K
R4 27K(1%)R4 27K(1%)E1
ICVL1018101A400
E1
ICVL1018101A400
12
R1
22K
R1
22K
E3
ICVL1018101A400
E3
ICVL1018101A400
1 3
SW2
SOT-152HST
SW2
SOT-152HST
M2 3
C1 M1 2
M4 5
M3 4
SW3
FPCB_MODE_KEY
SW3
FPCB_MODE_KEY
C1
0.047
C1
0.047
R6 12K(1%)R6 12K(1%)
E4
ICVL1018101A400
E4
ICVL1018101A400
81
Ⅵ. CIRCUIT DIAGRAM
11) STROBE
SLP
XETN
IGBT_G
SVCC
E1
SLP
SLP
SLP
XE-TUBE
CAPACITOR
SVCC : 300V~310V
1) Patten Width 1.0 ~ 1.2mm 2) Patten Spacing 1.2mm 3) Via 8
XETN, GND
1) Patten Width 1.2 ~ 1.5mm 2) Patten Spacing 1.2 mm 3) Via 10~12
S_TRIG : Ipeak 130A , 5KV
2) Patten Spacing Place Spacing 3 mm
MAIN CONNECTOR
S_TRIG
GNDCP3
GNDCP3
S-CP6
S-CP6
12
DS2
SLP
DS2
SLP
C1110uF/320WVC1110uF/320WVSLP
CP2
SLPCP2
R11M(1)R11M(1)
IGBT_GCP4
IGBT_GCP4
S+CP5
S+CP5
28
1
65 734 Q1
GT8G133_TSOPQ1GT8G133_TSOP
E11
E22
E
T1
KP-133
E
T1
KP-133
SVCCCP1
SVCCCP1
C2
GR732QR72E333KW (3225)
C2
GR732QR72E333KW (3225)
82
Ⅵ. CIRCUIT DIAGRAM
12) CARD
SD
_WP
SD
_WP
XF
EX
TC
E1
SC
MD
SD
CD
FD
0D
AT
0
FC
LKS
CLK
FD
3D
AT
3
FD
2D
AT
2
FD
1D
AT
1
RC
_ON
5VC
C_R
C
5VC
C_R
C
RC
_GN
D
FD
(0)
FD
(3)
FD
(2)
FD
(1)
XF
EX
TC
E1
FC
LK
SD
_WP
SD
CD
VD
DR
TC
RC
_CN
T
FD
(1)F
D(2)
XF
EX
TC
E1
FD
(3)
FC
LKF
D(0)
SD
CD
SD
_WP
RC
_CN
TR
C_O
N
3_3VC
C_C
OA
CH
VD
DR
TC
5VC
C
5VC
C3_3V
CC
_CO
AC
HV
DD
RT
C
RC
_GN
D
FRONT PCB CONNECTOR
C2
0.1
C2
0.1
R17
0RR
170R
12K515R K515R
K511R K511R
TP
1S
D_W
PT
P1
SD
_WP
TP
1355VC
C_R
C
TP
1355VC
C_R
C
12K516R K516R
K512R K512R
TP
137RC
_ON
TP
137RC
_ON
12345678910111213141516 17
G1
G2
J154548-1570
G1
G2
J154548-1570
C5
1(1)
C5
1(1)
3TAD/DC 1DMC 2SSV 3
DDV 4
KLC 52SSV 60TAD 71TAD 8
2TAD 9
MOC 11WP
12
1DC 01
GN
D1
13
GN
D2
14
1DDV 44
1SSV 33
J2S
CD
A3A
0302J2
SC
DA
3A0302
R15
0R R15
0R
C4
0.1C
40.1
12K517R K517R
+T
C1
33/6.3V(A
)
+T
C1
33/6.3V(A
)
TP
136GN
D
TP
136GN
D
2
1 3
Q2
DT
C114Y
E(E
MT
) / KR
C407E
Q2
DT
C114Y
E(E
MT
) / KR
C407E
R16
1K5
R16
1K5
12K514R K514R
1
2
BT
1M
S412
BT
1M
S412
C6
0.1
C6
0.1
12K513R K513R
1
A
2
CD
1
RB
501V-40
D1
RB
501V-40
C1
1(1)
C1
1(1)
FB
1
)1(1NS181GP81MLB
FB
1
)1(1NS181GP81MLB
12K518R K518R
83
Ⅵ. CIRCUIT DIAGRAM
13) CCD
GNDTG
CCDOUT
V1
H2A
RG
H2B
CSUB
H1B
H1A
SUB
15VCC_SENSOR
V1
V9V9V9V9V9
V7V7V7V7V7
V5BV5BV5B
V2V2V2V2V2V2
V3AV3AV3AV3AV3A
V4V4V4V4V4
V10
VHLD
VST
V8
V6
V5A
V3B
N7_5VCC_SENSOR
CCDOUT
H2A
H1B
GNDTG
GNDTG
RG
H2B
N7_5VCC_SENSOR
V9V9V9V9V9
V10
VHLD
VST
V8
V6
V5A
V3B
H1A
SUB
15VCC_SENSOR
V7V7V7V7V7
CSUB
V5BV5BV5B
V2V2V2V2V2V2
V3AV3AV3AV3AV3A
V4V4V4V4V4
GNDTG
GNDTG
GNDTG
GNDCCD GNDCCD
GNDCCDGNDTGGNDTG
GNDTG1
V93
V75
V5B7
V49
V3A11
V213
V115
GNDCCD17
GNDCCD19
VL21
SUB23
GNDTG25
H1A27
H1B29
GNDTG31
GNDTG33
V10 2
V8 4
V6 6
V5A 8
V3B 10
VHLD 12
VST 14
GNDCCD 16
CCDOUT 18
GNDCCD 20
VDD 22
CSUB 24
H2A 26
GNDTG 28
H2B 30
RG 32
J1
FPCB_54809
J1
FPCB_54809
1V
1
TS
V2
2V
3
DLH
V4
A3V
5
B3V
6
4V
7
A5V
8
B5V
9
6V
01
7V
11
8V
21
9V
31
01V
41T
UO
V5 1
DN
G61
DN
G71
DN
G81
DD
V91
GR
02B 2
H12
B1H
22B
US
32B
US
C42
A1H
52A2
H62
LV
72D
NG
82
U1
CCD_ICX476AQF
U1
CCD_ICX476AQF
1. The order of disassembly and assembly
■Caution
1. Do the disassembling and assembling camera where the blocking static electricity mat is on the table.
2. When handling the major PCBs of camera, please wearing the band which cuts off the electric current on the wrist.
3. When handling the major parts, be careful of below caution.
Ⅷ. SERVICE INFORMATION
84
Parts Caution etc.
F PCB type
CCD & IR CUT
PCB type
CONTACT type
When assembling the F PCB to the CONNECTOR by using
pincette, be careful of tearing and hooking.
Be careful of the handprinting while handling them.
Using the pincette which has soft tip.
The spot will be shown by using normal alchol when cleaning them.
Do the repairing where is no dust.
Wearing the band which cuts off the electric current and do the
reparing where the blocking static electricity mat is on by preventing
the defect of parts.
Be careful of defect and change by pincette.
85
■■ The order of disassembly
■TOP COVER
Ⅶ. SERVICE INFORMATION
1. Remove the screw cover
3. Remove the middle screw.( The length of scerws is different.)
2. Remove the left screw.( The length of scerws is different.)
4. Remove the right screw.( The length of scerws is different.)
① ② ③
①
②
③
■
Ⅶ. SERVICE INFORMATION
86
■ BOTTOMCOVER
1. Remove the screws.
2. Open the battery cover as shown.
3. Disassemble the Bottom cover handling with care of Lock part.
87
■ BACK COVER
Ⅶ. SERVICE INFORMATION
1. Remove the screws of top part.
2. Remove the screws of bottom part.
3. Disassemble the back cover carefully.
4. Raise and pull it in the direction as shown below.
①①
②②
88
■LCD
1. Remove the screws.
2. Raise the LCD as shown.
3. The left part of the picture has the Lock structure as shown below.
4. Raise the fixed connector pin and pull it in the direction as shown below.
Ⅶ. SERVICE INFORMATION
①①②②
89
3. After discharging the electric pressure charged in Strobe with a Discharger, remove the soldering.(Caution : After 10 seconds discharging, stay it for about 1 minute. Discharge it for about 3 seconds again and thendisassemble the Strobe.)
■MAIN Board
Ⅶ. SERVICE INFORMATION
1. The marked parts in the picture below should be removed
2. Remove the insulated tapes with pincette.( Beware of an electric shock.)
4. Remove the MIC soldering.
Don't short the pins by solder.
5. Remove the speaker soldering.
90
8. Disassemble the FPCB Connector of the barrel(N3).
9. Remove the screws.
7. Disassemble the Connector of the Top FPCB.
6. Disassemble the Connector of the Connecting FPCB.
Ⅶ. SERVICE INFORMATION
91
Ⅶ. SERVICE INFORMATION
10. Be careful of disassembling this part because it has the Lock structure as shown below.
11. Left part has the Lock structure. So raise and disassemble it from the right part.
12. Raise the fixed connector pin and pull it in the direction as shown below.
①
①
②
②
92
■FRONT COVER
1. Remove the screws.
2. Disassemble the front cover as shown.
Ⅶ. SERVICE INFORMATION
BBee ccaarreeffuull wwhheenn aasssseemmbblliinngg tthhiiss ppaarrtt..
LLoocckk ssttrruuccttuurree
93
■SPEAKER
Ⅶ. SERVICE INFORMATION
1. Remove the MIC soldering.
2. Pull out the MIC wire.
2. Pull out the MIC wire.
1. Remove the speaker soldering.
2. Disassemble the speaker.
■TOP FPCB
1. Pull the fixed Connector pin in the arrow direction as shown and disassemble the FPCB.
2. Remove the two front screws and disassemble the Strobe Ass'y.
3. Left part has the Lock structure. So raise and disassemble it from the right part.
Ⅶ. SERVICE INFORMATION
94
95
■ STROBE
Ⅶ. SERVICE INFORMATION
1. Remove the insulated tapes with pincette as shown.( Beware of an electric shock.)
2. After discharging the electric pressure charged in Strobe with the Discharger, remove the soldering.(Caution : After 10 seconds discharging, stay it for about 1 minute. Discharge it for about 3 seconds again and thendisassemble the Strobe.)
3. Remove the screws and disassemble the Strobe.
Don't short the pins bysolder.
96
■CARD(FRONT) PCB
1. Pull the fixed pin of the Card FPCB Connector in the arrow direction as shown and disassemble the FPCB.
2. Disassemble the Card PCB with pulling the Lock.
Ⅶ. SERVICE INFORMATION
97
■BATTERY HOLDER
Ⅶ. SERVICE INFORMATION
1. Remove the screw.
2. There are three Lock structures.
■Barrel (N3)
2. Disassemble the Barrel diagonally from the right as shown.
1. Remove the screws.
![R5 0400-0630 B[1]](https://img.pdfslide.us/doc/110x75/54325720219acdd64e8b59a5/r5-0400-0630-b1.jpg)
