Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Page 1/4
L2OSS • Rev. 15/11/20192233 rue de l’Aviation, Dorval, QC H9P 2X6
514.739.9984, 1.866.280.2332 • 1.866.265.8801 • www.stanprols.com
L2OSSTRI-LEVEL STRIP LIGHT The L20SS Tri-Level, programmable strip light has been designed to prevent energy loss and to increase energy savings by allowing the end-users to sensibly manage the degree of luminosity in applications or spaces that require continuous lighting, such as hallways and common areas. The luminaire features an integrated micro-wave motion sensor that regulates light levels according to the occupancy of a space.
• Construction
Housing & finishing − Sleek and compact design ideal for installation in tight spaces
− 22 gauge white powder painted steel
− Contoured frosted acrylic diffuser
Mounting − Surface or suspended
• Technical specifications − High frequency (microwave) sensor
− Easy to clean and service
− Long life LEDs that provide 80 CRI and color temperature of 4 000 K
− 0-10 V dimming standard
− Canopy plate for octagonal junction box and V-hooks are included (field installable)
− Estimated lifespan of over 100 000 hours to L70
− Suitable for damp location
Ambient temperature-20° - +50°C
• Compliances– Meets requirements of ICES-005 – cULus
FEATURES AND SPECIFICATIONS
quickship
LED�xture
005ICES
Not all products are qualified on the DLC QPL. To view our DLC qualified products, please consult the DLC Qualified Products List at www.designlights.org/search.
OVERVIEWLight source LED
Watts (W) 32, 40
Lumen output (lm) 4 160, 5 200
Efficiency (lm/W) 130
Color temperature (K) 4 000
CRI 80
Weight (lbs) 5.50
Project: Type:
Date:Catalogue #:Drawn by :
Page 2/4
L2OSS • Rev. 15/11/20192233 rue de l’Aviation, Dorval, QC H9P 2X6
514.739.9984, 1.866.280.2332 • 1.866.265.8801 • www.stanprols.com
Data is based upon tests performed in a controlled environment. Actual performance can vary depending on operating conditions. All products are subject to change or may be discontinued any time without notice.
L2OSS
QUICK SHIP AND TECHNICAL SPECIFICATION TABLE 1
Order code
Part number
DLC unique
ID
Watts
(W)
Volts
(VAC)
Color temp. (K)2
Lumen output (lm)3
Efficiency
(lm/W)
CRI Life L70
(hrs)4
Tested hoursLM-80(hrs)4
Dimming
(Yes/No)
Power factor
THD
(%)
Case qty
(master)
66083 L2OSS-48-LS1-W/40K PLE84LSOCJ0L 32 120-277 4 000 4 160 130 80 100 000 6 000 Yes 0.90 <10 6
66081 L2OSS-48-LS2-W/40K PLQI2S7P5BTE 40 120-277 4 000 5 200 130 80 100 000 6 000 Yes 0.90 <10 6
1 QUICK SHIP: Product availability is subject to change without notice. Please contact your Stanpro customer service representative to confirm inventory levels at time of order. 2 Typical color temperature range: +/- 5 %. 3 Lumen values are derived from photometric testing. Initial lumens range: +/- 10 %. 4 Life hours are derived from IESNA LM-80-08 testing report and projected per IESNA TM-21-11 extrapolations.
ACCESSORIES (order separately)
Order Code Part Number Type Case qty (master)
66085 L2LSS-LENS-4FT Replacement Lens for 48" 42
66086 L2LSS-VHOOKCHAIN Suspension Kit 50
66741 L2LSS-WG-4FT Wireguard for 48" 2
67340 L2LSS-BKT Fixture Connector 100
PROGRAMMING SETTINGS
Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ORDERING INFORMATION
Technical Information Bulletin Tri-Level LED Striplight
Qty Description Price
I accept the specifications of the luminaire configuration mentioned above.
Name:Company:Signature: Date:
TECHNICAL DRAWING
DIMENSIONS
August 10, 2018
SENSOR ON-OFF/ DIMMING SETTING OPTIONS
Order code: 66083Description: LSS/4FT/TLEV/32W/40K/120-277/A1/STDUPC: 69549660830Case quantity: 1
Length: 4’ (1 212 mm)Width: 3 11/32” (85 mm)Depth: 3 17/32” ( 90 mm)
LED STRIPLIGHTINSTALLATION INSTRUCTIONS
Programming Settings
DetectionArea
Hold Time
Daylight Sensor
Stand-by period
(Corridor Function)
Stand-by dimming
(Level)
Default programming• Detection area: 100%• Hold-time: 5s• Daylight sensor: Disable• Stand-by period (corridor function): 10s• Stand-by dimming level: 10%
50%
10%
1 2 1 21 21 2 3 1 2 3
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
Top
Bottom
LED STRIPLIGHTINSTALLATION INSTRUCTIONS
Programming Settings
DetectionArea
Hold Time
Daylight Sensor
Stand-by period
(Corridor Function)
Stand-by dimming
(Level)
Default programming• Detection area: 100%• Hold-time: 5s• Daylight sensor: Disable• Stand-by period (corridor function): 10s• Stand-by dimming level: 10%
50%
10%
1 2 1 21 21 2 3 1 2 3
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
Top
Bottom
Detection Area 100% - 75% - 50%- 10
Hold Time 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
Day Light Sen-sor
Disable - 50 lux - 10 lux - 2 lux
Stand-by period (corridor func-tion)
0s (on/off) - +∞ (bi-level; never switches off) 10s - 1 min - 5 min - 10 min - 30 min - 1 h
Stand-by dimming level
10% - 20% - 30% - 50%
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
4’ (1 212 mm)
3 17/32”( 90 mm)
3 11/32”(85 mm)
DETECTION PATTERNDetection Pattern
Wal
l mou
nted
hei
ght (
m)
Ceiling mounted detection pattern (m) Wall mounted detection pattern (m)
Cei
ling
mou
nted
hei
ght (
m)
10%10%
10%10%
30%30%
30%30%75%75%
75%75%
50%50%
50%50%
Zone de détection
Hau
teur
du
plaf
ond
(m)
Zone de détection installation au plafond (m) Zone de détection installation au mur (m)
Hau
teur
du
mur
(m)
Wall mounted detection pattern (m)
Ceiling mounted detection pattern (m)
Ceili
ng m
ount
ed
heig
ht (m
)
Wal
l mou
nted
he
ight
(m)
DIMENSIONS
48"
3.53"
3.34"
3.53"
3.34"
4'
Page 3/4
L2OSS • Rev. 15/11/20192233 rue de l’Aviation, Dorval, QC H9P 2X6
514.739.9984, 1.866.280.2332 • 1.866.265.8801 • www.stanprols.com
Data is based upon tests performed in a controlled environment. Actual performance can vary depending on operating conditions. All products are subject to change or may be discontinued any time without notice.
L2OSS
DETECTION PATTERN
SENSOR ON-OFF/DIMMING SETTING OPTIONS
Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ORDERING INFORMATION
Technical Information Bulletin Tri-Level LED Striplight
Qty Description Price
I accept the specifications of the luminaire configuration mentioned above.
Name:Company:Signature: Date:
TECHNICAL DRAWING
DIMENSIONS
August 10, 2018
SENSOR ON-OFF/ DIMMING SETTING OPTIONS
Order code: 66083Description: LSS/4FT/TLEV/32W/40K/120-277/A1/STDUPC: 69549660830Case quantity: 1
Length: 4’ (1 212 mm)Width: 3 11/32” (85 mm)Depth: 3 17/32” ( 90 mm)
LED STRIPLIGHTINSTALLATION INSTRUCTIONS
Programming Settings
DetectionArea
Hold Time
Daylight Sensor
Stand-by period
(Corridor Function)
Stand-by dimming
(Level)
Default programming• Detection area: 100%• Hold-time: 5s• Daylight sensor: Disable• Stand-by period (corridor function): 10s• Stand-by dimming level: 10%
50%
10%
1 2 1 21 21 2 3 1 2 3
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
Top
Bottom
LED STRIPLIGHTINSTALLATION INSTRUCTIONS
Programming Settings
DetectionArea
Hold Time
Daylight Sensor
Stand-by period
(Corridor Function)
Stand-by dimming
(Level)
Default programming• Detection area: 100%• Hold-time: 5s• Daylight sensor: Disable• Stand-by period (corridor function): 10s• Stand-by dimming level: 10%
50%
10%
1 2 1 21 21 2 3 1 2 3
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
Top
Bottom
Detection Area 100% - 75% - 50%- 10
Hold Time 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
Day Light Sen-sor
Disable - 50 lux - 10 lux - 2 lux
Stand-by period (corridor func-tion)
0s (on/off) - +∞ (bi-level; never switches off) 10s - 1 min - 5 min - 10 min - 30 min - 1 h
Stand-by dimming level
10% - 20% - 30% - 50%
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
4’ (1 212 mm)
3 17/32”( 90 mm)
3 11/32”(85 mm)
DETECTION PATTERNDetection Pattern
Wal
l mou
nted
hei
ght (
m)
Ceiling mounted detection pattern (m) Wall mounted detection pattern (m)
Cei
ling
mou
nted
hei
ght (
m)
10%10%
10%10%
30%30%
30%30%75%75%
75%75%
50%50%
50%50%
Zone de détection
Hau
teur
du
plaf
ond
(m)
Zone de détection installation au plafond (m) Zone de détection installation au mur (m)
Hau
teur
du
mur
(m)
Wall mounted detection pattern (m)
Ceiling mounted detection pattern (m)
Ceili
ng m
ount
ed
heig
ht (m
)
Wal
l mou
nted
he
ight
(m)
Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.
ORDERING INFORMATION
Technical Information Bulletin Tri-Level LED Striplight
Qty Description Price
I accept the specifications of the luminaire configuration mentioned above.
Name:Company:Signature: Date:
TECHNICAL DRAWING
DIMENSIONS
August 10, 2018
SENSOR ON-OFF/ DIMMING SETTING OPTIONS
Order code: 66083Description: LSS/4FT/TLEV/32W/40K/120-277/A1/STDUPC: 69549660830Case quantity: 1
Length: 4’ (1 212 mm)Width: 3 11/32” (85 mm)Depth: 3 17/32” ( 90 mm)
LED STRIPLIGHTINSTALLATION INSTRUCTIONS
Programming Settings
DetectionArea
Hold Time
Daylight Sensor
Stand-by period
(Corridor Function)
Stand-by dimming
(Level)
Default programming• Detection area: 100%• Hold-time: 5s• Daylight sensor: Disable• Stand-by period (corridor function): 10s• Stand-by dimming level: 10%
50%
10%
1 2 1 21 21 2 3 1 2 3
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
Top
Bottom
LED STRIPLIGHTINSTALLATION INSTRUCTIONS
Programming Settings
DetectionArea
Hold Time
Daylight Sensor
Stand-by period
(Corridor Function)
Stand-by dimming
(Level)
Default programming• Detection area: 100%• Hold-time: 5s• Daylight sensor: Disable• Stand-by period (corridor function): 10s• Stand-by dimming level: 10%
50%
10%
1 2 1 21 21 2 3 1 2 3
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
Top
Bottom
Detection Area 100% - 75% - 50%- 10
Hold Time 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
Day Light Sen-sor
Disable - 50 lux - 10 lux - 2 lux
Stand-by period (corridor func-tion)
0s (on/off) - +∞ (bi-level; never switches off) 10s - 1 min - 5 min - 10 min - 30 min - 1 h
Stand-by dimming level
10% - 20% - 30% - 50%
I – DisableII – 50LuxIII – 10LuxIV – 2Lux
Disable
50Lux
10Lux
2Lux
I – 100%II – 75%III – 50%IV – 10%
100%
75%
50%
10%
I – 5sII – 30sIII – 1minIV – 5minV – 10minVI – 20minVII – 30min
5s30s
1min5min10min20min30min
10%
20%
30%
50%
I – 10%II – 20%III – 30%IV – 50%
I – 0sII – 10sIII – 1minIV – 5minV – 10minVI – 30minVII – 1HVIII –
0s10s
1min5min10min30min
1H
∞+∞+
DETECTION AREAThe detection area can be reduced by selecting the combination on the DIP switches to fit precisely each specific application. Options: 100% - 75% - 50% - 10%
HOLD-TIMEHold-time means the time period required to maintain the light at 100% after all motion has ceased (the detection area has been vacated). Options: 5s - 30s - 1 min - 5 min - 10 min - 20 min - 30 min
STAND-BY DIMMING LEVELThis is the dimmed low light output level you would like to reach after the hold-time in the absence of people. Options: 10% - 20% - 30% - 50%
DAYLIGHT SENSORThe daylight threshold can be set on DIP switches to fit a particular application. Options: Disable - 50 lux, - 10 lux, - 2 lux
STAND-BY PERIOD (CORRIDOR FUNCTION)This is the time period to maintain light output at the lowest level before theluminaire completely switched off in case there is no motion activity for a long period of time. Note: "0s" means on/off control; "+∞ means bi-level dimming control, fixture never switches off when daylight sensor is disabled. Options: 0s - 10s - 1 min - 5 min - 10 min - 30 min - 1 H - +∞
50%
10%
4’ (1 212 mm)
3 17/32”( 90 mm)
3 11/32”(85 mm)
DETECTION PATTERNDetection Pattern
Wal
l mou
nted
hei
ght (
m)
Ceiling mounted detection pattern (m) Wall mounted detection pattern (m)
Cei
ling
mou
nted
hei
ght (
m)
10%10%
10%10%
30%30%
30%30%75%75%
75%75%
50%50%
50%50%
Zone de détection
Hau
teur
du
plaf
ond
(m)
Zone de détection installation au plafond (m) Zone de détection installation au mur (m)
Hau
teur
du
mur
(m)
Wall mounted detection pattern (m)
Ceiling mounted detection pattern (m)
Ceili
ng m
ount
ed
heig
ht (m
)
Wal
l mou
nted
he
ight
(m)
Page 4/4
L2OSS • Rev. 15/11/20192233 rue de l’Aviation, Dorval, QC H9P 2X6
514.739.9984, 1.866.280.2332 • 1.866.265.8801 • www.stanprols.com
Data is based upon tests performed in a controlled environment. Actual performance can vary depending on operating conditions. All products are subject to change or may be discontinued any time without notice.
Illuminance at a distanceZonal lumen summary
Zonal lumen summary
Polar candela distribution
Zone Lumens % Fixture0-30 840.0 20.90-40 1 373.4 34.20-60 2 455.2 61.260-90 1 047.2 26.170-100 778.4 19.490-120 383.1 9.50-90 3 502.4 87.390-180 511.1 12.70-180 4 013.5 100
Zone Lumens % Fixture0-30 1 065.9 210-40 1 742.9 34.30-60 3 115.0 61.260-90 1 326.1 26.170-100 984.2 19.390-120 483.1 9.50-90 4 441.1 87.390-180 646.8 12.70-180 5 087.9 100
Center beam fc Beam width
17.0' 3.76 42.5' 80.9'
34.0' 0.94 85.0' 161.8'
51.0' 0.42 127.5' 242.7'
68.0' 0.24 170.0' 323.5'
85.0' 0.15 212.4' 404.4'
102.0' 0.10 254.9' 485.3'
Vert. spread: 102.7° Horiz. spread: 134.4°
PHOTOMETRIC DATA1
66083 - L2OSS-48-LS1-W/40K • 4 013.5 lm
66081 - L2OSS-48-LS2-W/40K • 5 087.9 lm
Polar candela distribution
L2OSS
Illuminance at a distance
Center beam fc Beam width
17.0' 4.77 42.6' 80.5'
34.0' 1.19 85.2' 161.0'
51.0' 0.53 127.8' 241.5'
68.0' 0.30 170.4' 322.1'
85.0' 0.19 213.0' 402.6'
102.0' 0.13 255.6' 483.1'
Vert. spread: 102.8° Horiz. spread: 134.2°
1 Complete IES files available on our website.