7/23/2019 L0 Review on Laboratory Equipments and Procedures

http://slidepdf.com/reader/full/l0-review-on-laboratory-equipments-and-procedures 1/2

Fakulti Teknologi Kejuruteraan Universiti Teknikal Malaysia Melaka

Hang Tuah Jaya,76100, Durian Tunggal, Melaka, Malaysia.

Tel: +606-234 6528 Fax: +606-234 6526

REVIEW ON LABORATORY EQUIPMENTS AND PROCEDURES 

Page 1 of 2 

1.  Refer to “LABORATORY SAFETY & HEALTH PROCEDURES - BETR 3393” form. 

  Listen Carefully on Instructor Briefing on this matter.

 

Put your signature as declaration on LABORATORY SAFETY INDUCTION andsubmit to the Lab Instructor at the end of lab session.

2.  During this subject, we will continue using Lab Equipment provided by OpenLabBox.

3.  Let we recap on what we have done in lab experiment for Control System Fundamental subject.

4.  The closed loop configuration is very important to control any plant. Below diagram is a negative

feedback type for closed loop control system.

5.  Perform Basic Motor Position Control exercise by referring to lab equipment manual provided.

(Lab Instructor will guide u from scratch in how to do this experiment detail).

6.  Please jot down any important information that must be remembered to ensure future experiments

can be done successfully.

7.  U can use OpenLabBox Student Manual in order to guide u in completing the task.

~END~

7/23/2019 L0 Review on Laboratory Equipments and Procedures

http://slidepdf.com/reader/full/l0-review-on-laboratory-equipments-and-procedures 2/2

Fakulti Teknologi Kejuruteraan Universiti Teknikal Malaysia Melaka

Hang Tuah Jaya,76100, Durian Tunggal, Melaka, Malaysia.

Tel: +606-234 6528 Fax: +606-234 6526

REVIEW ON LABORATORY EQUIPMENTS AND PROCEDURES 

Page 2 of 2 

Sample of explanation during this lab session.