(L CCA °F - HiFifiles.ihshotair-stage.gethifi.com/Brochures/leister-plastic... · TRIAC PID Closed-loop control of temperature and function ... Using the TRIAC PID to weld a

86

www.leister.com 87

Floo

ring

/ In

terio

r Dec

orat

ion

Flooring / Interior Decoration

UNIFLOOR E / UNIFLOOR S 88GROOVER 89

General Catalog Plastic Welding

www.leister.com88

115.054

115.057

114.224

115.342

103.394

103.602

126.448

Hot air welder

UNIFLOOR E / UNIFLOOR S

With UNIFLOOR E you can weld floor coverings made of PVC-P, PE,linoleum and modified thermoplastics, without any reconfiguration,up to 24.6 ft per minute. It is reliable, technically perfect and easy tohandle.

b Reproducible results thanks to digital display of set and actual values

b Electronically controlled heatingb Steplessly controlled air flow (only UNIFLOOR E)b All floor coverings welded without reconfigurationb Automatic startb Integrated wall switch

Accessories UNIFLOOR E

Technical DataVoltage V~ 120Power W 1800Temperature °F 68 – 1148Speed ft/min 3.3 – 24.6Air flow range % 50 – 100Size (L !W ! H) inch 16.5 ! 10.6 ! 8.5Weight lbs 24.2 (with 10 ft cord)Conformity marking 2Approval mark 3Certification scheme CCAProtection class I 1

Article No.: 115.024 UNIFLOOR E 120 V / 1800 W, squeezed nozzle, without plug, temperature in °C116.133 UNIFLOOR E 120 V / 1800 W, squeezed nozzle, without plug,temperature in °F115.038 UNIFLOOR S 120 V / 1800 W, squeezed nozzle, without plug, temperature in °C

Immaculate weld seams with the UNIFLOOR E (Vietnam).

Perfectly stowed away in the providedstorage case.

Welding rod de-reeler

Trolley attachment

Floor welding nozzle, optimised for PVC material

Floor welding nozzle, for PVC and PUR material

Floor welding nozzle air-knife, optimised for PUR material

Heating element, 120 V / 1800 W

Storage case 23.8 x 19 x 12.3 inchmulti-layer plate, green

(included in delivery)


www.leister.com 89

102.401

102.402

102.404

102.403

102.405

102.406

126.448

Grooving machine

GROOVER

The grooving machine GROOVER cuts welding grooves into thick,tough floor coverings made of PVC-P, PE and linoleum. The tool glideson three rollers and cuts a uniform grooving depth, even at highspeeds.

b Groove cutting of all types of floor coveringsb Very high rotational cutting speed at two levelsb Adjustable guide roller for tracking accuracyb Particle and dust-free operation with an additional fan and dust bagb Milling as close to the edge possible

Accessories GROOVER

Technical DataVoltage V~ 120 / 230Power W 350 / 700 (2 levels)Speed rpm Level 1: 14 500 (350 W)

Level 2: 18 500 (700 W)Groove depth adjustment inch 0 – 0.16Size (L !W ! H) inch 9.4 ! 8 ! 10Weight lbs 14.8 (with 10 ft cord)Conformity marking 2Approval mark 3Certification scheme CCAProtection class II 4

Article No.: 108.395 Groover 120 V, tungsten carbide tipped blade " 4.33 x 0.14 inch,

trapezium profile, with US plug 111.032 Groover 230 V, tungsten carbide tipped blade " 4.33 x 0.14 inch,

round profile, with Euro plug 108.393 Groover 230 V, tungsten carbide tipped blade " 4.33 x 0.14 inch,

round profile, with Euro plug

Strong drive suitable for PVC, PUR andlinoleum materials.

Floo

ring

/ In

terio

r Dec

orat

ion

Tungsten carbide tipped blade " 4.33 × 0.14 inch, trapezium profile

Tungsten carbide tipped blade " 4.33 × 0.16 inch, round profile


Tungsten carbide tipped blader " 4.33 × 0.14 inch, round profile

Diamond cutting blade " 4.33 × 0.14 inch, semi-round profile

Storage case 23.8 x 19 x 12.3 inchmulti-layer plate, green

(included in delivery)



www.leister.com10 General Catalog Plastic Welding

Hot Air Tool

TRIAC PID

Closed-loop control of temperature and function monitoring thanks tomicroprocessor. The popular hand tool for top quality results.

• Reproducible results thanks to digital display of set and actual values of temperature.

• Constant temperature independent of voltage fluctuations and environmental conditions.

• Adaptor tube heat protection• Electronic heating element protection • Motor shut-off at minimal carbon level

Hot Air Tool

TRIAC S

The reliable, cost-effective and proven hand tool with stepless temperature range adjustment.

• Adaptor tube with heat protection • Electronic heating element protection • Motor shut-off at minimal carbon level • Multiple replacements of carbon brushes possible

Technical DataVoltage V~ 120Power W 1600 Temperature °F 122 – 1112 Size (L × !) inch 13.4 × 3.5, handle ! 2.2 Weight lbs 2.4 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCA Protection Class II 4

Article No.: 100.749 TRIAC PID 120 V / 1600 W for push-fit nozzles with US plug / UL100.750 TRIAC PID 120 V / 1600 W for screw-on nozzles with US plug / UL

Other versions available upon request.

Technical DataVoltage V~ 120Power W 1600Temperature °F 68 – 1292Size (L "!) inch 13.4 × 3.5, handle ! 2.2Weight lbs 2.4 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCA Protection Class II 4

Article No.: 100.726 TRIAC S 120 V / 1600 W for push-fit nozzles with US plug / UL100.727 TRIAC S 120 V / 1600 W for screw-on nozzles with US plug / UL


www.leister.com 13General Catalog Plastic Welding

Hot

Air

Too

ls

Floors / interior design

Tubular nozzle ! 0.2 inch, push-fit

Version extra-strong

100.303

105.578

Speed weld nozzle 0.18 × 0.5 inch for fillet weld, push-fit on tubular nozzle ! 0.2 inch

107.139

Speed weld nozzle for tape welding 0.31 inch, push-fit on tubular nozzle ! 0.2 inch

107.137

Speed weld nozzle 0.12 inch, push-fit on tubular nozzle ! 0.2 inch



106.989

106.990

106.991

Sieve reflector 0.5 × 0.4 inch, push-fit on tubular nozzle ! 0.2 inch

107.324

Sieve reflector 2.0 × 1.4 inch, push-fit

107.337


107.338

Shell reflector 1.0 × 5.9 inch, push-fit

107.326

Spoon reflector 1.06 × 1.4 inch, push-fit

107.307

Soldering reflector 0.7 × 1.5 inch, push-fit

107.339

Tacking nozzle, push-fit on tubular nozzle ! 0.2 inch

106.996

Rotary burr ! 0.23 inch (for drilling machine)

106.997


106.992

Shrinking / soldering / vehicle repairs

Speed weld nozzle 0.12 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch

Speed weld nozzle 0.16 inch, with small air-slide,push-fit on tubular nozzle ! 0.2 inch

Speed weld nozzle ! 0.2 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch

105.431

105.432

105.433

Extension nozzle ! 0.2 inch, 5.9 inch 106.982

Other versions available upon request.Technical data are subject to change without prior notice.

Heating element, 120 V / 1600 W, for TRIAC PID

Heating element,120 V, 1550 W, for TRIAC S

100.650

100.702

The TRIAC S hand tool, used for weldinglinoleum, equipped with a speed weldnozzle.

TRIAC PID: monitoring of welding tem-perature for top quality.

Using the TRIAC PID to weld a patch on abuilding site.

0.12

0.2

0.16

0.12

0.2

0.16

www.leister.com14

1

2

3

4

5

6

7

8

1 + 2

5

6

3 + 4


Hot air tool

TRIAC BT

The TRIAC BT fulfills all of the functionality and design requirements necessary for successful plastic welding. Weighting just 2.2 pounds, it is the lightest in its class and is made from high-quality material. EveryTRIAC BT kit undergoes stringent quality inspections before leavingthe factory in Switzerland. The sturdy storage case includes everythingan expert technician requires.

Easy welding with the ergonomicpressure roller.

Temperature setting:Convenient and reliable temperature adjustment.

Accidental start-up protection:The temperature adjustment becomeslit-up if the power to the tool is interrupted.

Filter: The fine mesh air filter prevents dirt fromclogging the air inlet.

Filter cleaning:The air filters on both sides can be easily removed and cleaned.

Tool handle: Ergonomically designed handle with a soft grip covering for a secure hold.

Nozzle:Extra strong integral 5 mm universal nozzle.

Spare heating element:Protected, packed and within easyreach.

Storage case:Enough space for all the accessories the professional needs.


Hot

Air

Too

ls

The TRIAC BT floor welding kit is ideal for the ambitious flooring technician.

• Light and easy to handle • Ergonomic handle for welding without strain • Electronically protected heating element • Integral tabular nozzle 0.2 inch • Built in start-up protection in the event of power interruption

Hot air tool

TRIAC BT floor welding kit Accessories TRIAC BT

107.139

105.431

105.432

105.433

136.918

116.586

137.855

138.902138.539

Well balanced design for precise welding of floor coverings.

106.989

106.990

106.991

Technical DataVoltage V~ 120 Power W 1550 Temperature °F 68 – 1292 Size (L × !) inch 14.6 × 3.5, handle ! 2.2 Weight lbs 2.2 (without 6.5 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCA, CBProtection Class II 4

Article No.: 136.940 TRIAC BT 120 V / 1550 W floor welding kit, with US plug

Included in delivery: TRIAC BT, two speed welding nozzles 0.2 inch (one with small air-slide for PUR materials), spare heating element, storage case

0.12

0.16

0.2

Included in delivery.

Speed welding nozzle, 0.18 x 0.5 inch, for fillet weld, push-fit on tabular nozzle ! 0.2 inch

Speed welding nozzle 0.12 inch with small air-slide, push-fit on tabular nozzle Speed welding nozzle 0.16 inch with small air-slide, push-fit on tabular nozzle Speed welding nozzle 0.2 inch with small air-slide, push-fit on tabular nozzle


Storage case for TRIAC BT, TRIAC PID, TRIAC S, ELECTRON

Leister cutter with four blades

10 x 10 spare blades hook shape10 x 10 spare blades trapezoid shape

Speed welding nozzle 0.12 inch, push-fit on tabular nozzle ! 0.2 inch Speed welding nozzle 0.16 inch, push-fit on tabular nozzle ! 0.2 inch Speed welding nozzle 0.2 inch, push-fit on tabular nozzle ! 0.2 inch

0.12

0.16

0.2


Hot air tool

HOT JET S

The most compact hand tool from Leister. HOT JET S is a low weightof only 1.3 lbs, includes cord and slim handle. It ensures fatigue-freewelding with high performance.

• The smallest Leister hot-air tool • Electronic steplessly controlled temperature • Electronic steplessly controlled air flow • Low noise • Integrated flexible tool stand

Accessories HOT JET S

Technical DataVoltage V~ 120Power W 460Temperature °F 68 – 1112Size (L × !) inch 9.3 × 2.8, handle ! 1.6Weight lbs 0.9 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4

Article No.: 100.861 HOT JET S 120 V / 460 W with US plug100.859 HOT JET S 120 V / 460 W with US plug (UL)


107.141

107.142

107.144

105.556

106.996

105.567

106.989

106.990

106.991

106.992

106.993

Profile A Profile B

105.431

105.432

105.433

Heating element,230 V~ / 1550 W

Leister-Cutter, mit 4 Ersatzklingen

Wide slot nozzle 0.6 inch, angled, push-fit


Tubular nozzle ! 0.2 inch, push-fit

Extension nozzle ! 0.2 x 6.0 inch, straight

Angled nozzle 0.8 inch, 90° angled, push-fit

Tacking nozzle, push-fit on tubular nozzle ! 0.2 inch

Speed welding nozzle 0.12 inch, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.16 inch, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.2 inch, push-fit on tubular nozzle ! 0.2 inch

Speed welding nozzle 0.22 inch, push-fit on tubular nozzle ! 0.2 inch, A profile

Speed welding nozzle 0.28 inch, push-fit on tubular nozzle ! 0.2 inch, B profile

Speed welding nozzle 0.12 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.16 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch Speed welding nozzle 0.2 inch, with small air-slide, push-fit on tubular nozzle ! 0.2 inch

0.280.22

0.15 0.2

0.12

0.2

0.16

0.12

0.2

0.16


Hot

Air

Too

ls

107.137

107.139

107.324

107.146

107.151

107.148

107.305

107.310

107.311

107.312

Fitting a solder shrink connection with theHOT JET S and a push-fit sieve reflector.

The HOT JET S is especially suited tocarry out work in areas which are difficultto access.

The small and light HOT JET S works also inclose corners.

103.607

Speed welding nozzle 0.31 inch, for tape welding , push-fit on tubular nozzle ! 0.2 inch

Speed welding nozzle 0.18 × 0.5 inchfor fillet weld, push-fit on tabular nozzle ! 0.2 inch

Sieve reflector 0.5 × 0.4 inch, push-fit on tubular nozzle ! 0.2 inch

Soldering nozzle ! 0.2 inch

Soldering nozzle ! 0.16 inch

Soldering nozzle ! 0.12 x 0.06 inch,oval




Ironing nozzle 0.6 x 1.0 inch



Hot air tool

GHIBLI

Derived from a hot desert wind – GHIBLI certainly lives up to its name!Thanks to two-step airflow switching and steplessly adjustabletemperature, it can be used for the most diverse applications.

• Universal tool for welding and shrinking• Welding results independent of voltage fluctuations and

ambient temperature• Two-step selectable airflow• Extensiv range of accessories

Accessories GHIBLI

Technical DataVoltage V~ 120Power W 1500Temperature °F 68 – 1112Size (L × W × H) inch 7.7 × 3.3 × 6.3, handle ! 2.2Weight lbs 2.0 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4

Article No.: 101.887 GHIBLI 120 V / 1500 W with US plug101.891 GHIBLI 120 V / 1500 W with US plug (UL)


106.998

106.999

107.154

107.006

107.308

107.309

107.313

107.325

107.319

107.315

107.007

107.345

101.850

Simple heating up fibre optic loose tubecables for further processing.

Welding pipes.


Wide slot nozzle 1.6 inch

Tubular nozzle ! 0.2 inch, angled,push-fit

Extension nozzle ! 0.2 x 5.1 inch, straight

Sieve reflector 2.0 × 1.4 inch, push-fit Sieve reflector 1.4 × 0.8 inch, push-fit


Soldering reflector 0.7 × 1.3 inch, push-fit

Sieve reflector ! 2.6 inch, push-fit

Folding reflector 2.8 × 0.5 inch, push-fit

De-horning nozzle, push-fit

Welding mirror 5.3 inch, PTFE-coated



Hot

Air

Too

ls

The handy, quiet and compact hot-air tool for universal use. It is appliedin fields as shrinking, vehicle labeling, forming, heating. Its balanceddesign allows strain-free welding. Excellent price/performance ratio.

• Light and compact• High stability in head-handle position for long term use• Balanced ergonomics with soft grip • Very quiet tool, ideal for indoor use • Constant temperature and closed-loop controlled electronics

Hot-air tool

SONORA S1 kit Accessories SONORA S1

Technical DataVoltage V 120Power W 1500Temperature ºF 176 – 1202Size inch 9.1 x 7.9Weight lbs 1.3 (without 6.5 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4

Article No.: 140.997 SONORA S1 kit,120 V / 1500 W with US plug


119.269

119.270

119.314

119.271

119.316

119.315

119.312

107.324

107.308

Shrinking of cable labels Ergonomic design for strain-free carwrapping.

Included in delivery.

Glass protection nozzle

Wide slot nozzle 2.0 inch, push-fit

Reducer nozzle, push-fit (Included in delivery)

Reflector nozzle, push-fit (included in delivery)

Tubular nozzle 0.2 inch, push-fit

Wide slot nozzle 0.8 inch, push-fit

Solder sleeve reflector nozzle, push-fit (included in delivery)

Sieve reflector 0.5 x 0.4 inch, push-fit on tabular nozzle ! 2.2 inch

Sieve reflector 2.0 x 1.4 inch, push-fit


Hot air tool

ELECTRON

Powerful and versatile, the ELECTRON is the tool on every spicialists’wishlist.

• Powerful • Compact • Robust • Construction site tried and tested

Accessories ELECTRON

Technical DataVoltage V~ 120 / 230 / 400 Power W 2700 / 3400 / 5500Temperature °F 68 – 1200Size (L !") inch 12.6 ! 3.7, handle " 2.5Weight lbs 2.8 (without 10 ft cord) Conformity Marking 2Approval Mark 3Certification Scheme CCAProtection Class II 4

Article No.: 110.889 ELECTRON 120 V / 2700 W with 32A UK plug 107.791 ELECTRON 120 V / 2700 W, without plug107.781 ELECTRON 230 V / 3400 W with Euro plug116.055 ELECTRON 230 V / 3400 W with scraper nozzle, with Euro plug107.788 ELECTRON 400 V / 5500 W, with 16A CEE plug


For welding of bitumen sheets, use thepowerful ELECTRON with wide slot nozzle.

107.258

107.266

116.753

107.270

107.229

107.331

107.327

107.333

107.340

107.328

Wide slot nozzle, push-fit 2.8 × 0.4 inch, for bitumen

Wide slot nozzle 2.9 × 0.12 inch, push-fit,

with tool stand (Article 116.753)

Tool stand

Wide slot nozzle 5.9 × 0.5 inch, push-fit

Round nozzle 0.8 inch, push-fit

Folding reflector 2.8 × 2.8 inch,push-fit

Sieve reflector 3.3 x 3.3 iunch, push-fit

Sieve reflector 5.9 x 5.1 inch, push-fit

Shell reflector, 1.8 x 9.8 inch, push-fit

Folding reflector 2.3 × 2.9 inch,push-fit

www.leister.com 23

Hot

Air

Too

ls


Accelerating the drying process of varnish, paint and body filler using theELECTRON.

ELECTRON with scraping nozzle. Scraping color without solvent!

106.127

107.330

116.054

105.961

107.347

107.346

107.348

113.269

101.273

103.588

Sieve reflector ! 2.6 inch, push-fit

Folding reflector 4.9 × 0.85 inch, push-fit

Scraper nozzle, (only use in combination with heatertube, article no. 116.053)

Sword-shaped nozzle 1.8 x 0.5 x 13.8 inch, push-fit,for foundries

Sword-shaped nozzle 2.9 x 0.5 x 20.5 inch, push-fit,edges rounded, PTFE-coated

Welding mirror 10.6 inch, push-fit

Tool rest





Hot

Air

Too

ls

Hot air tools

General accessories

The hand roller is an essential accessoryfor tunnel applications.

Roofing Billboards / Tarpaulins

Pressure roller 1.6 inch with ball bearings (silicone)

5 spare silicones

140.160

140.599


5 spare silicones

140.160

140.599


5 spare silicones

140.161

140.598

Pressure roller 3.1 inch (silicone) 106.974



137.855

138.902138.539

Storage case, for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON

116.586


5 spare silicones

140.161

140.598

Pressure roller, with ball bearings (brass)

106.972

Pressure roller 1.1 inch (PTFE) 106.976

Seam probe tester 138.314

Chamfer plane with ten spare blades

Spare blades kit containing ten blades

111.346

111.348



137.855

138.902138.539

Storage case, for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON

116.586

Brass brush 116.798

106.981 Pressure roller for custom seal





137.855

138.902138.539

Storage case for TRIAC BT, TRIAC PID,TRIAC S, ELECTRON

116.586

Plastic fabrication

Tool rest for TRIAC PID, TRIAC S107.348

Floorings / Interior decoration



137.855

138.902138.539

Pressure roller, with ball bearings (brass)

106.972


106.969 Spatula

Trimming guide, to use with spatula (106.969)

122.541

Spare blades for hand grooving tool106.968

Hand grooving tool106.966


116.586

Civil Engineering / Tunnel / Landfill sites


5 spare silicones

140.161

140.598



5 spare silicones

140.160

140.599


116.586

Hot air tools

General accessories



137.855

138.902138.539


5 spare silicones

140.160

140.599


5 spare silicones

140.161

140.598



Hot

Air

Too

ls

Profile sizes

Welding rods

Diameters in inchProfile A

Profile B

Article packagingunits (lbs)

Welding accessories PE

104.283 Welding rod HDPE, profile A, black 6.6

104.294 Welding rod HDPE, profile A, white 6.6

104.284 Welding rod HDPE, profile B, black 11

104.299 Welding rod HDPE, profile B, white 11

106.650 Welding band HDPE, 0.32“ x 0.08“, white 2.2

104.300 Welding rod LDPE, profile A, black 6.6

Welding accessories PP

104.287 Welding rod PP, profile A, grey / beige 6.6

104.301 Welding rod PP, profile A, black 6.6

104.288 Welding rod PP, profile B, grey / beige 11

126.356 Welding band PP, 0.32“ x 0.08“, natural 4.4

Welding accessories PVC

104.296 Welding rod PVC-U (hard), profile A, transparent 6.6

104.278 Welding rod PVC-U (hard), profile A, grey 6.6

106.641 Welding rod PVC-U, profile A, brown 6.6

104.280 Welding rod PVC-U (hard), profile B, brown 11

104.279 Welding rod PVC-U (hard), profile B, grey 11

104.302 Welding rod PVC-P (soft), profile A, transparent 6.6

Welding accessories ABS

104.295 Welding rod ABS, profile A, white 6.6

113.587 Welding rod ABS, profile A, black 6.6

107.027 Welding band ABS, 0.32“ x 0.08“, white 2.2

Article packagingunits (lbs)

Welding accessories div.

104.297 Welding rod PA, profile A, black 6.6

104.298 Welding rod PC, profile A, transparent 6.6

104.313 Welding rod PC / ABS/ALPHA (Honda), profile A, black 6.6

104.311 Welding rod PC / PBTP (Xenoy), profile A, grey 6.6

104.309 Welding rod PS, profile A, white 6.6

104.308 Welding rod PUR, profile A, black 6.6

106.654 Welding band Xenoy, 0.32“ x 0.08“, grey 4.4

106.642 Welding rod PPs, profile A, grey, flame resistant 6.6

104.304 Welding rod PVDF, profile A, natural 6.6

104.303 Welding rod POM, profile A, natural 6.6

Test bundles

107.036 Test bundle bodywork welding rods, each consisting ofprofile A pieces of 14.6 inch single marked6x HDPE, 6x PP, 6x PA, 6x PC, 6x ABS, 6x PCABS / APLHAHonda, 6x PC / PBTP / Xenoy

107.037 Test bundles standard each consisting of profile A pieces of 14.6 inch single marked 5x PVC-U, 5x PVC-P, 5x PP, 5x ABS, 5x HDPE, 3x PC, 3x PA,3x POM, 3x LDPE, 3x PC / ABS / ALPHA Honda,3x PC / PBTP / Xenoy

107.040 Test bundle welding band each consisting of profile A pieces of 14.6 inch single marked 9x HDPE 0.32“ x 0.08“ white, 9x PP, 0.32“ x 0.08“ natural,9x ABS 0.32“ x 0.08“ white, 9x PC / PBTP / Xenoy grey

0.22

0.15

0.28

0.2

Documents

(L CCA °F - HiFifiles.ihshotair-stage.gethifi.com/Brochures/leister-plastic... · TRIAC PID Closed-loop control of temperature and function ... Using the TRIAC PID to weld a