Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.

© 2008 Hewlett-Packard Company hp.com/go/activitycenter

Kung Fu Panda™ 3-D Paper Character Master Tigress ASSEMBLY INSTRUCTIONS Time to Complete: Approximately 60 minutes Level: Difficult

GETTING STARTED Materials: • Metal-edged ruler • Butter knife • Scissors or X-ACTO knife • Cutting mat (optional) • Multipurpose glue • Pencil

1. Score all the pieces: Using a ruler as a guide, run the back side of a butter knife firmly along all the dotted lines.

2. Using scissors or an X-ACTO knife and cutting mat, cut out all pieces along the solid lines. Also, be sure to make cuts along ears where marked.

ASSEMBLE THE BODY

3. Fold tabs inward and side panels down on body (1). Glue in place.

4. On the bottom panel, place a dab of glue on each tab. Fold inward and glue in place.

ASSEMBLE THE LEGS

5. On one leg (2), fold all tabs in on dotted lines. Fold into box shape and glue tab A in place. Repeat on other leg (3).

Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.

© 2008 Hewlett-Packard Company hp.com/go/activitycenter

6. Fold in the tabs on one foot and glue in place. Repeat on other foot.

7. At the top of one leg, place a dab of glue on each tab. Fold inward and glue in place. Repeat with the other leg.

ASSEMBLE THE ARMS

8. On the arms (4) tuck paw tab cuts under adjacent edges and glue in place.

9. Overlap arm tabs and glue in place.

ASSEMBLE THE HEAD

10. To assemble the head (5), start with the snout. Fold cheek tabs upward and glue over tabs A and B.

11. Tuck snout tabs C and D behind the face and glue in place.

Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.

© 2008 Hewlett-Packard Company hp.com/go/activitycenter

12. Tuck ear tabs E and F behind the face and glue in place. Repeat with tabs G and H.

13. On the bottom panel, place a dab of glue on each tab. Fold panel inward and glue in place to close head.

14. Fold ears up as shown.

ASSEMBLE THE TAIL

15. Fold the tail (6) in half along dotted line and glue together. To shape, curl around a pencil as shown.

16. Place a dab of glue on flat end of tail and adhere to bottom back of body as shown.

FINISHING TOUCHES

Kung Fu Panda ™ & © 2008 DreamWorks Animation L.L.C.

© 2008 Hewlett-Packard Company hp.com/go/activitycenter

17. Glue the left and right legs to the bottom of the body.

18. Glue the head onto the panel between the arms.

19. Glue the head and arms onto the top of the body.

20. You’re done!

HEAD (5)

G

E

F

HB

A

C

D

RIGHT LEG (2)

A

ARMS (4)

TAIL (6)

BODY (1)

LEFT LEG (3)

A