*This information is sourcedfrom overseas and may notnecessarily apply locally.It is essential that you confirmspecifications and otherinformation with your localKubota dealer.

K K008-3Spacious, comfortable, and more productive, yet it fits in the tightest spaces.The K008-3 sets the standard for all ultra-compact excavators.

K U B O T A U L T R A - C O M P A C T E X C A V A T O R

For sheer productivity, no other ultra-compact excavator measures up to

the K008-3. By upgrading it in the essential areas of performance,

durability, serviceability, and comfort, the spacious K008-3 outperforms

the competitors in a wide range of construction and building work.

Kubota raises the bar again with the spacious K008-3 ultra-compact excavator.

K008-3

Improved hose and boom cylinder protectionAll the hydraulic hoses hidden within the boom anddipper arm. With the cylinder mounted on top of theboom, the K008-3 increases service life by offeringoutstanding protection from damage.

Protected bucket hosesBy running inside the dipper arm,the bucket hoses are also wellprotected from damage.

Complies

with Tier IV!

Powerful and dependable, the K008-3’s diesel

engine delivers superior horsepower and

performance. It offers low noise and vibration

levels, exceptional fuel efficiency, and complies with

the U.S. EPA’s 2008 Tier IV emissions regulations.

Clean-runningKubota Engine

Handy toolboxTo help you perform basicmaintenance, the K008-3comes complete with atoolbox conveniently locatedunder the operator’s seat.

Coolant temperature gaugeThe new coolant temperature gauge helps prevent theengine from overheating by keeping you informed.Located close to the control levers, a warning lamp lightsup when the coolant temperature rises to 115 degrees,and turns off when it falls to 108 degrees or below.

TPSSAllows the operator to chooseeither ISO or SAE controlpatterns. Requires approximately5 minutes to make the minormechanical change.

Straight wall trenchingEquipped with a swing angle of up to 60 degrees, theK008-3 lets you dig a straight trench along any wall.

K008-3

Protected auxiliary hoses

By routing its auxiliary hydraulic hosesthrough the boom, the K008-3 nolonger requires lengthy hoses whenconnecting your implements.Furthermore, a shorter hose lengthgreatly reduces the risk of snaggingand causing damage.

Comfortable operator’s seatWell padded and contoured,you’ll truly appreciate the comfortof its operator’s seat, especiallyduring long days of operation.

Fast and easy maintenanceA full-open bonnet and newengine layout makes dailyinspection and maintenance ofessential components a snap.Both features now provide youwith easy access to the radiator,battery, coolant, fuel filter, anddual-element air-cleaner.

Two-speed travelNeed to make up time? Step on theK008-3’s hi-speed pedal, and you’llmaneuver around job sites fasterthan any other compact excavatorin its class.

195 m

360 mm

Two-way leverLocated within easy reach, it letsyou switch between control of theblade or the adjustable track width.

With increased space in the operator’sarea, you’ll get the job done fasterand in comfort.

860 mm

700 mm

1,375 mm

Reliable Kubota E-TVCSengineSuper dependable andefficient, the combustioncreated by our engine’s uniqueThree Vortex CombustionSystem reduces exhaustemission, noise, and vibration.

345 mm

Adjustable width track frameTo enable passage through narrow spaces such asdoorways and gates, the adjustable width track framecan reduce the K008-3’s track width down to 700 mmby simply operating a single lever. Plus, changing theblade width is as easy as removing one pin by hand.

Pedal-operated boom swingA convenient toe-heel pedal lets youeasily operate the boom swing.

1,715 mm

mm

Spacious operator’s areaYou’ll find it more comfortablebehind the operating levers of the

K008-3. That’s because we’vegenerously increased the space

between the operating leversand the operator’s seat, and

lengthened the floorboards.

Swing bracket pin bushingsTo increase life of components,swing bracket pins have bushings.

Wider working rangeFor maximum productivity, itsdigging/dumping heights,digging depths, and diggingradius at ground level have allbeen increased.

W O R K I N G P E R F O R M A N C E

©2007 Kubota Corporation

KUBOTA Tractor Australia Pty LtdFreecall: 1800 334 653Email: sales@kubota.com.au

Web Site: http://www.kubota.com.au

Model

Type of tracks

Model

K008-3

Rubber

Kubota D722-E3

10.1 (7.5) / 2050

719

2750

2230

860 / 700

150

21.0

21.0

1000

460

2.0 / 4.0

770

900

1230

180

0.25

55

60

700 / 860

200

200

180

12.5 / 17.0

12.0

8.3

Output (SAEJ 1349 net)

Displacement

Crawler length

Shoe width

Max. lift above ground

Max. drop below ground

Ground contact pressure

Overall length

Overall height

Overall width

Min. ground clearance

Pump capacity

Hydraulic oil (reservoir/system)

Fuel reservoir

Operating weightIncluding operator’s weight 80 kg.

Auxiliary hydraulic flow

Max. breakout force

Unit swing speed

Tumbler distance

Blade

Bucket

Arm

Travel speed

Max. traction force

Left

Right

Width

Height

HP (kW)/rpm

10.3 (7.7) / 2050Output (SAEJ 1995 gross) HP (kW)/rpm

cc

mm

mm

mm

mm

l/min

l/min

kgf

kgf

km/h

kgf

mm

mm

mm

kgf/cm2

rpm

degree

degree

mm

mm

1000kgs

mm

mm

l/min

l/min

*Specifications are subject to change without notice for purpose of improvement.

Boom swing angle

Dimensions

Engine

Dimensions

Hydraulicsystem

Drivesystem

Swingsystem

Blade

G H

AD

CB

EF

1790

w/ROPS Bar800

700860

700

860

2230

750

LIFTPOINT

HEIGHT(m)

GL

LIFTING CAPACITYOVER-FRONTBLADE DOWN

LIFT POINT RADIUS (m)unit=ton

LIFTING CAPACITYOVER-FRONT

BLADE UP

LIFT POINT RADIUS (m)unit=ton

LIFTING CAPACITYOVER-SIDE

LIFT POINT RADIUS (m)unit=ton

Machine with ROPS canopy and rubber crawler, without bucket

1.8

1.2

0.6

0

1.2

-

-

0.54

0.55

1.8 2.5

0.20

0.23

0.30

0.31

-

0.21

0.21

0.19

MAX

-

0.20

0.19

0.17

1.2

-

-

0.36

0.32

1.8 2.5

0.20

0.21

0.19

0.18

-

0.13

0.13

0.12

MAX

-

0.12

0.11

0.11

1.2

-

-

0.28

0.25

1.8 2.5

0.17

0.17

0.16

0.14

-

0.10

0.10

0.10

MAX

-

0.10

0.09

0.09

Max. digging height

Max. dumping height

Max. digging depth

2870

2035

1715

1375

3025

3075

1120

955

750

Max. vertical digging depth

Max. digging radius @ ground

Max. digging radius

Min. tail turning radius

mm

mm

mm

mm

mm

mm

mm

mm

mm

W/o swing

With swing

The company reserves the right to change the above specifications without notice. This brochure is for descriptive purpose only. Please contact your local Kubota dealer for warranty infomation. For your safety, Kubota strongly recommends the use of a Rollover Protective structure (ROPS) and seat belt almost all applications.

A

B

C

D

E

F

G

H

Min. turning radius

Unit: mm

KUBOTA ULTRA-COMPACT EXCAVATOR

DIMENSIONSSPECIFICATIONS

WORKING RANGELIFTING CAPACITY

Cat. No.8749-01-AA Printed in Japan '08-1D. ◇2 2