KTM PowerParts Catalog Street USA 2011

www.ktmusa.comAlways consult your local authorized KTM dealer for the range of conversion parts, replacement parts, necessary mounting parts, as well as any and all part options for your particular KTM model. KTM WILL NOT BE HELD LIABLE FOR IMPROPER INSTALLATION OR USE OF THESE PRODUCTS.Please follow all instructions provided. Professional advice and proper installation of the KTM_PowerParts by an authorized KTM dealer are essential to provide maximum safety and function. KTM North America reserves the right to alter or discontinue without replacement, equipment, technical details, colors, pricing, materials, services, service work, etc. without notice and without reason, as well as cease production of certain models without prior notice. For this reason, we recommend you ask your local authorized KTM dealer for further information before ordering or purchasing a specific model. KTM North America accepts no liability for printing errors. LEGAL DISCLAIMERShould not be emulated. The riders illustrated are professional motorcycle riders. The photos were taken on a close racing circuit or closed roads. KTM draws to the attention of all motorcycle riders that they should abide by all traffic laws and regulations, that they should wear the recommended protective clothing and always ride in a responsible way. Some photos feature European Spec motorcycles.

for innovations see »

* U 6 9 1 1 P P S *

twitter.com/ktmusa

powerwear/powerpartsSTREET 2011

Powerw

ear/PowerPartsstreet2011

Pho

tos:

A.

Bar

bant

i, B

ueno

s D

ias,

H.

Mit

terb

auer

, re

deye

, R

. S

ched

l, P

. M

athi

s

www.kiska

.com

© 2011, KtM north aMerica, inc.

are You readY ?»www.ktmusa.com

are You readY ?»www.ktmusa.com

KTM North America, Inc. 38429 Innovation Court, Murrieta, CA 92563 www.ktmusa.comKTM Canada, Inc. 1375-1 Marie-Victorin, St-Bruno, QC J3V 6B7 www.ktmcanada.com

Whether you like to burn through the canyons on

Sunday morning or get lost daydreaming along fence

rows in the heartland you are a KTM rider. An Orange

Bleeder. Someone who always takes the path less

traveled. Riding a KTM Motorcycle is a fantastic

way to spend your hard earned leisure time and in

the next 157 pages we give you over 600 possible

accessories to help make the bike uniquely yours.

Each KTM PowerPart & PowerWear item is

carefully tested, engineered, and proven to meet

the same high standards we set for our bikes.

From race tracks to two-tracks, KTM PowerParts

and PowerWear products are rigorously tested

in the real world to make sure they are worthy

of the KTM name. For us “Ready to Race” isn’t

just a slogan. It’s how we conduct business.

So get out and ride, you deserve it!

Street Equipment 4RC8 12

990 Super Duke 38950 / 990 Supermoto 60

950 / 990 Adventure 88690 LC4 110

Tools 146Overview 158

3ThE pOwER iS in ThE DETAiLS»

streetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetstreetequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipment

5

(S/48) 3pw111012(M/50) 3pw111013 (L/52) 3pw111014(XL/54) 3pw111015 (XXL/56) 3pw111016(XXXL/58) 3pw111017

KTM TECh 1R SUiT

1.3 mm top grade leather with extended perforated

panels on upper and lower body. External PU shoulder

and knee protectors. Aramidic stretch panels on sleeves

and crotch areas. Removable inner mesh liner with 3D

mesh liner insert on the back for comfort. YKK® zippers.

Patented calf expansion pockets. CE certified elbow and

knee/shin protectors. Exclusively for KTM by Alpinestars.

STREET EqUipMEnT» 7

(S/48) 3(M/50) 3(L/52) 3pw(XL/54) 3(XXL/56) 3(XXXL/58) 3

KTM TEC









(M) 3pw111123(L) 3pw111124 (XL) 3pw111125(XXL) 3pw111126

VEnTED JACKET

Breathable summer jacket. Upper material comprised

of tear-resistant and abrasion-resistant polyester/

polyamide blended fabric. Excellent venting thanks to large

ventilation zones in front and back. Comfort collar, SaS-

Tec 3D protectors on shoulders and elbows. Waistband

adjustment. Reflective areas. Small connecting zipper.

(M) 3pw111133(L) 3pw111134(XL) 3pw111135(XXL) 3pw111136

pURE ADVEnTURE JACKET

Wind and waterproof, breathable touring jacket made

from polyamide. SaS-Tec protectors on the shoulders

and elbows. Viscoelastic foam in back protector pocket,

SaS-Tec back protector available as an option. Adjustable

comfort collar. Waist adjustment. Wind and waterproof

front closure. Ventilation zips at the front, back and on

the sleeves. Long and short connecting zipper and seat

web. Removable thermal lining. Removable Z liner.

(S/30) 3pw111222(M/32) 3pw111223(L/34) 3pw111224 (XL/36) 3pw111225(XXL/38) 3pw111226(XXXL/40) 3pw111227

VEnTED pAnTS

Breathable summer pants. Upper material comprised of

tear-resistant and abrasion-resistant polyester/polyamide

blended fabric. Excellent venting thanks to large ventilation

zones in front and back. Textile stretch zone on back below

the waistband and on the front above the knee. SaS-Tec

3D protectors on the knee. Viscoelastic foam on the hip.

Waistband adjustment. Doubled material on knee and seat

panel. Calf width adjustment. Small connecting zipper.

(S/30) 3pw111232(M/32) 3pw111233(L/34) 3pw111234(XL/36) 3pw111235 (XXL/38) 3pw111236(XXXL/40) 3pw111237

pURE ADVEnTURE pAnTS

Wind and waterproof, breathable touring pants made from

polyamide with reinforcements on areas where you are likely

to fall. SaS-Tec protectors on the knees. Stretch zones

above the knee, in the hollow of the knee and on the back.

High-cut back. Comfort stretch waistband, rapid waistband

adjustment, calf width adjustment. Wind and waterproof

front closure. Ventilation zip. Long and short connecting

zipper. Removable thermal lining. Removable Z liner.



STREET EVO JACKET

Street jacket with wind and waterproof, breathable PU

membrane. Removable thermal lining for warm weather

wear. Comfort collar, 3D protectors on shoulders and

elbows. Visco-elastic foam in back protector pocket

(SaS-Tec back protector available separately). Stretch

zones for extra mobility. Long and short connecting

zippers plus belt loop.

(39/6,5) 3pw101011(40/7,5) 3pw101012(41/8) 3pw101013(42/9) 3pw101014(43/10) 3pw101015(44/10,5) 3pw101016(45/11,5) 3pw101017(46/12) 3pw101018(47/13) 3pw101019

TECh TOURinG BOOT

Perfect for long journeys and touring. Made by

Alpinestars for KTM and designed to the highest

standard. Features a fully waterproof Gore-Tex©

membrane. Safety features include shin protector,

ankle protector and heel and toe reinforcements.

(39/6,5) 3pw101031(40/7,5) 3pw101032(41/8) 3pw101033 (42/9) 3pw101034(43/10) 3pw101035(44/10,5) 3pw101036 (45/11,5) 3pw101037(46/12) 3pw101038(47/13) 3pw101039

SUpERTECh R BOOT

Racing boots made with patented, bio-

mechanic, removable inner boot, with its

own closure mechanism. Other features

include: new air vent system; aerodynamical

extremely flat outer surface; aluminum

inserts at the heel. Comfortable entry

through a side zip which goes all the way to

sole. Exclusively for KTM by Alpinestars.

(S) 3pw111022(M) 3pw111023(L) 3pw111024(XL) 3pw111025

KTM BiOniC BACK pROTECTOR

CE Level 2 Impact performance (under 9kN transmitted force) in accordance

with EN 1621-2. Ergonomic 5 plate construction contours to the natural curve

of the back. Plates lock to lessen overextension of the back. Excellent shock

absorption even in repeated impacts. Thin, light, and substantially breathable core.

Adjustable shoulder straps. Wide waist belt. Exclusively for KTM by Alpinestars.

(S) 3pw111712(M) 3pw111713(L) 3pw111714 (XL) 3pw111715(XXL) 3pw111716

KTM Gp pRO GLOVES

PU injected wrist panel for impact and abrasion resistance.

PU knuckle and finger protectors. Patented 3rd and 4th finger

bridge. Full grain leather construction. TPR detailing. Synthetic

suede palm reinforcement. Perforated leather panels for added

ventilation. Top of the glove is internally reinforced with knit

Kevlar® and features highly abrasion resistant Pittards Armor-Tan

leather at critical areas. Exclusively for KTM by Alpinestars.


pURE ADVEnTURE GLOVES

Waterproof touring gloves. Leather main

construction with doubled leather on

palm, index finger and thumb. The PU

membrane keeps out the wet and cold.


Aq RACER GLOVES

Waterproof racing gloves that are able to withstand

any tour. Leather construction, doubled in critical

areas. HIPORA® membrane. Carbon knuckle

cover. Hard plastic skid plate on the palm. TPR

on the edge of the hand. Large TPR wrist closure.

Silicone-printed KTM logos on the middle finger

and index finger give a secure hold on the controls.


VECTOR GLOVES

Sport glove made of Pittards leather and

goatskin featuring a carbon knuckle cover.

TPU air vents on the fingers. TPR skid

plate on the ball of the hand. TPR on the

edge of the hand. Double wrist closure.



RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC813

690.08.110.000 / 49

690.08.110.000 / 49

CARBOn FROnT FEnDER

690.08.050.000 / 49

CARBOn LEFT SiDE FROnT FAiRinG

690.08.051.000 / 49

CARBOn RiGhT SiDE FROnT FAiRinG

690.30.060.000 / 49

CARBOn FROnT ChAin GUARD

690.08.901.000 / 49

CARBOn LEFT FROnT FAiRinG COMpLETE

690.08.908.000

TinTED winDShiELD

Special tinting improves the

appearance of the bike particularly

when using our carbon fairing.

690.08.902.000 / 49

CARBOn RiGhT FROnT FAiRinG COMpLETE

CARBOn pARTS

The finest carbon for a very elegant appearance and maximum weight

reduction. Very impressive and detailed, proven by Akrapovics' many

years of experience with carbon. The average weight reduction for

each part is between 30% and 55%. Matte finish.

RC8» 15

690.08.032.000 / 49

CARBOn UnDERSEAT FAiRinG

690.04.050.000 / 49

CARBOn REAR FEnDER

690.08.042.000 / 49

CARBOn RiGhT REAR FAiRinG

690.08.043.000 / 49

CARBOn LEFT SEAT FAiRinG

690.08.044.000 / 49

CARBOn RiGhT SEAT FAiRinG

690.08.041.000 / 49

CARBOn LEFT REAR FAiRinG

690.08.055.000 / 49

CARBOn LEFT EXhAUST FAiRinG

690.08.056.000 / 49

CARBOn RiGhT EXhAUST FAiRinG

690.08.999.000

CARBOn DECAL

690.08.031.000 / 49

CARBOn REAR COVER

690.08.052.000 / 49

CARBOn LEFT SiDE REAR FAiRinG

690.08.053.000 / 49

CARBOn RiGhT SiDE REAR FAiRinG

690.07.025.000 / 49

CARBOn TAnK pAD LEFT

690.07.026.000 / 49

CARBOn TAnK pAD RiGhT

RC8» 17

DE REAR FAiRinG

691.05.907.100

EVOLUTiOn TiTAniUM hEADER

691.05.383.000 (OnLY FOR RACinG)

EVOLUTiOn TiTAniUM SiLEnCER SET

In combination with a modified appearance,

this titanium exhaust system is an

enhancement for all RC8 riders who would

like to have great sound, light weight and an

improved power output. The exhaust system

can be mounted only in combination with

69105907100 headers. For proper mounting

the lower fairing must be modified.

RC8» 19

690.05.283.100

08 – 10

TiTAniUM SiLEnCER

690.05.907.000

08 – 10

TiTAniUM hEADER

In short: "Akrapovic at it's best", from a technical standpoint and also appear-

ance. This superstock exhaust was specially developed for the RC8. Thanks to

the experienced Akrapovic racing division which was included in the R&D, the

exhaust delivers increased drivability. For usage on race tracks that allow less

noise than FIM sound limits, the exhaust system will be delivered with remov-

able muffler inserts. We recommend for race track use the outer clutch hub

69132001044! The exhaust system can be mounted only in combination with

the 690.05.907.100 headers.

691.05.999.000

RC8 R 09 –10

693.05.999.000

RC8 R 11

CLUB RACE KiT

The Club Race Kit is the perfect choice for ambitious visitors to race track training sessions,

but also for RC8R competitors in a range of amateur racing series. The use of a specially

developed, high-quality Akrapovic EVO4 sports exhaust system together with an amended

cylinder head gasket, specially tuned valve timing as well as the use of an altered fuel

injection mapping all result in a significant increase in performance. Because this adaptation

involves only a few changes and the construction of the engine is very well thought out, any

official KTM RC8 dealer is able to make the Club Kit adaptations in just a few hours.

Includes the Akrapovic EVO 4 exhaust system.

691.05.907.000

TiTAniUM hEADER EVO 4

RC8 R

Specifically designed to be matched with the RC8-R Club Race kit, Superbike and Superstock

engine kit. Should not be used without one of this 3 Tuning Kits and special Mapping.

691.05.283.100

TiTAniUM SiLEnCER EVO 4690.29.096.140 RC8 R 11

USER SETTinG TOOL

This Fuel Injection management tool works with your laptop to

fine tune fuel injection settings, build track specific maps, and

log riding data. Software can be downloaded from www.KTM.com

and includes 2D and 3D modeling. For closed course use only.

– Fine tune fuel injection mapping– perfect for trackside adjustments

USER SETTING TOOL

RC8» 21

FiBERGLASS pARTS

An absolute "must have" for every ambitious racer! The fiberglass fairing

meets with the FIM requirements for Superstock. What this means to you;

Paint the fairing as you like, attach it with the quarter turn pins and hit the

track. Fiberglass fairing needs mounting kit for control box and voltage regulator

69012034044. For proper mounting you also need to order 14 pieces quick closure

69008901050 and 14 pieces receivers 45007040050.

690.08.901.150

qUiCK CLOSURE

450.07.040.050

COUnTERpART qUiCK CLOSURE

690.08.101.000

FiBERGLASS FROnT FAiRinG

690.08.110.000

FiBERGLASS FROnT FEnDER

690.08.103.000

FiBERGLASS RiGhT SiDE FAiRinG

690.08.102.000

FiBERGLASS LEFT SiDE FAiRinG

690.08.160.100

FiBERGLASS UnDER EnGinE FAiRinG

690.08.114.000

FiBERGLASS REAR FAiRinG

690.08.147.000

FiBERGLASS SEAT FAiRinG

690.08.947.000

FiBERGLASS SEAT FAiRinG wiTh qUiCK CLOSURE

690.12.034.044

RACinG MOUnTinG KiT FOR COnTROL BOX AnD VOLTAGE REGULATOR

690.08.147.150

SEAT COnTACT SURFACE

This self-adhesive seat contact surface gives you the perfect

contact to your bike. For use with fiberglass seat fairings

69008147000 or 69008947000.

RC8» 23

690.10.951.134 Z34690.10.951.135 Z35690.10.951.137 Z37690.10.951.138 Z38690.10.951.139 Z39690.10.951.140 Z40690.10.951.141 Z41690.10.951.142 Z42

REAR SpROCKET 520

Made of high-strength aluminum.

Only for use with 520 chain.

690.33.929.015 Z15 690.33.929.016 Z16 690.33.929.017 Z17

FROnT SpROCKET 520


600.05.022.244

SLS REMOVAL KiT

Mounting only possible on Akrapovic exhaust

system 69005283000 or 69005283100

and use of special Akrapovic Mapping!

690.05.014.000

FROnT BRACKET EXhAUST hOLDER

Additional weight reduction due to

removed horn, and horn-holder.

690.10.965.120

ChAin 520

High strength and high efficiency chain,

reduces drag. That means increased

performance of the bike!

690.03.901.023

STEERinG STOppER

Protects the steering damper from damage due to

extreme handlebar movement. Fits all RC8 models

from VIN VBKVR94068M947878.

690.11.046.044

SiDESTAnD REMOVAL KiT

For quick sidestand removal. Leave

the support on the bike and plug in the

adapter for the sidestand sensor.

690.11.046.144


Completely remove the side stand and

stock support, and mount the lightweight

shifting shaft support. Weight reduction

plus a real race appearance.

690.34.931.066

REVERSE GEAR ChAnGE KiT

690.13.930.000

FROnT BRAKE pADS

Brake performance on a real FIM Superbike

level. These pads provide consistent feel for

use on high speed tracks with higher braking

demands. Works perfect with stock brake-

discs and also with the wave-style discs

61109960000. For race use only!

691.08.908.000

RACinG winDShiELD

Clear windshield with special shape, directly

derived from IDM factory racing team!

690.06.915.100

AiR FiLTER RACinG

Racing air filter with a higher air flow rate for

better performance. Cleanable and reusable

for extended service life.

RC8» 25

690.07.908.000

RACinG FUEL CAp

Fuel like the pro's do! Keyless and extremely quick.

691.30.986.044 RC8 08 – 10RC8 R 09 – 11

CARBOn CLUTCh COVER pROTECTOR

691.30.985.044 RC8 08 – 10RC8 R 09 – 10

693.30.985.044 RC8 R 11

CARBOn EnGinE pROTECTOR LEFT

A must for FIM compliance in superstock racing, also protects your

engine on the street in case of a fall.

690.34.080.000

qUiCKShiFTER

The perfect solution for quick up shifting without using the clutch! An electronic sensor, recognizes

when you push the shift lever. Then, it interrupts the ignition for a fraction of a second, which allows

a drag free up-shifting without using the clutch and without closing the throttle. Is also useable

with our reverse gear change kit 690.34.931.066. Needs mounting kit 690.34.081.044.

U690.9852

TiRE wARMERS

Temperature Adjustable with Solid State Micro-Processor

and Digital Display. See actual tire temperature while

the warmer runs. Most accurate available on the market.

Temperature set point is changed with the push of a button

- range up to 212 degrees F. Use higher temps to get ready

to hit the track & lower temps for saving Heat Cycles in

between track sessions. Safely heat rain tires and different

compounds. Soft carrying tote from Ogio. Foam filled hard

case for the digital controllers.

RC8» 27

750.38.041.100

OiL FiLTER CAp

CNC machined design made of high-

strength aluminum, orange anodized.

690.08.926.050

qUiCK LOCK COVER

690.13.950.044

ARTiCULATED BRAKE LEVER KiT

Lightweight racing lever designed to bend

away in case of a spill. Fully adjustable.

690.13.950.045

BRAKE LEVER ADJUSTER whEEL

For use with 690.13.950.044

690.34.931.044

ARTiCULATED CLUTCh LEVER KiT



690.03.937.144

ADJUSTABLE FOOTpEG KiT

The CNC machined foot pegs are made of high-strength

aluminum. They are adjustable in 9-positions. That makes

it easy to find the perfect position on the bike. Heel

guard is not included. We recommend the carbon heel

guards 6900396605049 and 6900396505049.

690.08.915.033

nUMBERpLATE hOLDER KiT

Shorter version for a cleaner look.

Includes LED blinkers.

772.30.002.060 / 04

FACTORY iGniTiOn COVER pLUG

690.07.909.000

TAnK CAp STiCKER

690.07.011.000

TAnK pAD

RC8» 29

690.03.945.000

CRASh BOBBinS FROnT

Will protect your forks in the event of a crash.

612.30.026.100

CLUTCh COVER

CNC-machined version made

of high-strength aluminum.

610.13.009.100

CnC BRAKE-FLUiD RESERVOiR CAp



610.02.055.060

CnC CLUTCh RESERVOiR COVER



690.13.962.000

CnC REAR BRAKE CYLinDER COVER



610.03.046.200

CRASh BOBBinS REAR

Will protect your swingarm in the event

of a crash.

690.04.030.090

SwinGARM STiCKER SET

Avoids scratches to the swingarms!

691.32.900.000

AnTi-hOppinG CLUTCh RC8 R

This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid

rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration.

This allows for better traction, wheel stability, and higher corner entry speeds. It also

puts less fatigue on the drive train. This clutch is developed for race track use.

690.32.900.000

AnTi-hOppinG CLUTCh RC8

Same as 691.32.900.000 with softer

clutch springs.

RC8» 31

690.09.001.044

FROnT 3,5" x 17"

690.10.001.044

REAR 6" x 17"

MARChESini ALUMinUM whEEL

Forged Rims, directly descended from racing.

Due to a special developed multi-directional

forging process, and detailed force vector

analysis, these wheels offer a maximum weight

reduction and very high rigidity values, for

ideal transfer of brake and acceleration forces.

Weight of wheel set app. 8.6 kg.

690.10.060.100

wAVE-TYpE BRAKE DiSC REAR

Optimized in visual appearance and function. This floating

wave disc features clear feedback without any loss of

brake performance even under heavy conditions.

611.09.960.000

wAVE-TYpE BRAKE DiSC 320 MM

Stainless floating disc with anodized orange center

provides consistent brake performance under extreme

conditions. Even at the highest temperatures the outer

disc does not bend or warp due to the advanced design

and race proven materials. The alloy center is lighter

than original rotors and is race track approved. Specially

designed for the KTM superbikes this rotor is a great

combination of improved performance and visual appeal.

RC8» 33

611.09.099.000 611.09.099.000 / 20

RiM STiCKER SET

Ready cut sticker for adding on front

and rear rim.

626.09.099.000

RiM STiCKER “TATTOO”

Only for wheels with 5-spokes design!

620.10.965.118

ChAin BLACK SCALE 525

The Black Scale chain by RK is a performance chain

that combines great technical features with an

exclusive appeal coming from its black hard coated

plates with brassed pins and rollers. 118 link.

611.10.051.037 / 04 Z37 611.10.051.038 / 04 Z38 611.10.051.040 / 04 Z40611.10.051.041 / 04 Z41

SpROCKET

If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly

then we have the perfect sprocket for you! A steel outer chain ring combined with an inner

aluminum carrier combines the best of both worlds to create a light weight, long lasting

sprocket. This not only increases rear sprocket life but also the front sprocket and chain life

for up to 3 times compared to normal sprockets. If you are looking for the highest quality

sprocket available and one that matches the image of your KTM your search is over!

780.13.920.000

BRAKE BLEEDER SCREw

Brake system bleeding made simple.

By installing this new bleeder screw with special

holding valve, you simply open the screw of the

return-valve a half turn and pump the brake fluid

through the brake system. The special holding

valve prevents air getting sucked back into the

system. The result: you don't need to have a

second person to pump or open and close the

bleeder screw. Changing the brake fluid or bleeding

the system is done in seconds. Comes with

anodized mud cap. For the front brake caliper.

620.14.949.000

ADApTiVE BRAKELiGhT

Add increased visibility on the road. In the event of

hard braking, the control unit pulses the rear brake

light, alerting traffic behind you.

RC8» 35

690.12.078.000

REAR BAG

The useful rear bag follows in form and layout the rear of the RC8. A specific feature

is that you don't need any carrier system for mounting. Advantage: No tricky mounting

of brackets which destroys the nice design of the RC8 rear.You only have to click in the

bag instead of the rear seat. Small items like cell phone, wallets, keys, etc. are kept

perfectly. When the rear bag is mounted the bike can be used only as a single seater.

Capacity app. 10 Liters.

690.12.019.000

TAnK BAG

This specially developed tank bag fits perfect to the chiseled image of

the RC8. To keep this form at high-speed, we construct the bag using hi

tech materials and techniques. The novel combination of inherently stable

foam and textile fibers results in a rigid form with a soft appearance. The

included map holder is mounted in seconds. Includes rain cover.

690.12.007.000

pROTECTiVE COVER inDOOR

No chance for dust or unwanted scratches etc to damage your

bike, thanks to the KTM indoor bike cover which makes your RC8

an eye-catcher in the garage as well. The cover is made from a

special fabric with a distinctive structure that does not allow dust

or condensation to pass through. The inner-side has a soft lining.

610.12.032.000 RC8 08 – 10RC8 R 09 – 11

RADiAL ROADLOK ®

The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-

theft locking security due to the system's permanently-mounted lock body--which literally becomes a part

of the vehicle's frame. The frame-mounted solution eliminates movement completely while the system is

engaged--the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider

forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin,

which keeps the bike locked right where the rider parks the vehicle, guarantees that the system will never

accidentally lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 61109960000.

601.12.035.000

ALARM SYSTEM

Plug and Play fail safe single circuit immobilization. Water and vibration resistant

resin bonded construction. Integral movement sensor. Storage box is also secured.

2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium

transmitter battery (3 year life). 69012035044 necessary for mounting.

690.12.035.044

ALARM SYSTEM MOUnTinG KiT

601.12.178.000

ZippER LOCK

Avoids thieves' quick entry to your

luggage! For use on 69012078000

and 69012019000.

RC8» 37

990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 super dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper duke

39611.05.099.300

600.30.085.000 07 – 10

CARBOn iGniTiOn COVER pROTECTiOn

Effective protection against stones, made

from Carbon Kevlar.

600.30.086.000 07 – 10

CARBOn CLUTCh COVER pROTECTiOn


from Carbon Kevlar.

610.08.014.000 / 49 07 – 10

CARBOn ChAinGUARD AnD hUGGER

Finest carbon for a very elegant appearance

and a weight reduction.

611.08.110.000 / 49 07 – 10

CARBOn FROnT FEnDER

50% weight reduction.

990 SUpER DUKE» 41

610.08.019.000 / 49

07–10

CARBOn COVER FOR REAR pART

Finest carbon for a very elegant appearance and a

weight reduction. Not useable for R-Versions.

610.07.040.020 / 49 07–10

CARBOn SEAT COVER

Not useable for R-Version.

610.05.099.007

FOR 610.05.099.000

CARBOn hEAT pROTECTOR

610.03.095.000 / 49

07–10

CARBOn FOOTREST pROTECTiOn SET

600.06.003.002/ 49 07–10

CARBOn AiRBOX COVER LEFT

610.06.003.002/ 49 07–10

CARBOn AiRBOX COVER RiGhT

600.30.060.000 / 49

07–10

CARBOn FROnT ChAinGUARD

32 % weight reduction.

990 SUpER DUKE» 43

610.05.099.000 07–10

SLip-On TiTAniUM SiLEnCER SET

Your motor’s potential will be awakened; the designs for this system come from the

same department that designs the racing versions of Akrapovic exhaust systems. In

addition, due to the use of high-tech materials, you will save weight and improve the

overall characteristics of your bike. 55% weight reduction . Removable noise reduction

insert. Special mapping from a KTM Street dealer is required for proper performance.

For closed course use only.

610.05.099.200 07 – 10


The Akrapovic carbon tipped SLIP-ON system is a starting-level tuning

component. It is an excellent combination of price, performance, top-quality

materials and production quality. Mounting only possible with original headers.

Approx. 9 kg less weight and more performance. Special mapping from a

KTM dealer is required for proper performance. For closed course use only.

610.05.007.200

07 – 10

EVOLUTiOn TiTAniUM hEADERS

610.05.007.300

07 – 10

RACinG STAinLESS STEEL hEADERS

610.05.099.300

07 – 10


The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze

that little bit more out of their Super Duke. The complete system delivers an improved torque curve

to the back wheel and saves a lot of weight, improving handling not to mention the sharp appearance.

The design of the muffler for the Akrapovic Racing and Evolution systems fits exceptionally well to the

aggressive naked bike look. Not useable for 990 Superduke R 08-09. For closed course use only.

990 SUpER DUKE» 45

600.30.126.200 07–10

CnC CLUTCh COVER

High quality CNC-machined outer clutch cover with

factory look. Made of high-strength aluminum.

503.13.005.000 07–10

CLAMp BRAKE CYLinDER

Without mirror support.

610.02.044.100 07–10

CLAMp CLUTCh CYLinDER


772.30.002.060 / 04

07–10


610.11.046.044 07–10

SiDE STAnD DiSASSEMBLY KiT

For quick sidestand removal. Leave the

support on the bike and plug in the adapter

for the sidestand sensor.

620.12.940.050 07–10

REAR ViEw MiRROR EXTEnSiOn

If you want to improve your rear view, this is the

solution for you. Mounts betweens the stock

mirrors and adapters.

990 SUpER DUKE» 47

610.04.037.050 07–10

SwinGARM BOLT COVER SET

610.02.055.060 07–10


CNC-machined version made of

high-strength aluminum.

610.13.009.100 07–10




610.03.045.200 07–10

CRASh BOBBinS FROnT


610.03.046.200 07–10

CRASh BOBBinS REAR

Will protect your swingarm in the event of a crash.

613.03.946.044 07–10

CRAShpAD FOOTpEG

Crashpads to be mounted on

the passenger footpeg.

49990 SUpER DUKE»

611.07.908.000 07–10

RACinG FUEL CAp


690.13.950.044 07–10


Light weight racing lever designed to bend

away in case of a spill.

690.34.931.044 07–10




U691.0017 07–10

ThROTTLE CAM SYSTEM

Precision machined aluminum throttle tube with

delrin inserts for smooth throttle action. Includes

three updated cam profiles designed to give different

throttle response with fuel injected bikes.

611.32.000.100 07–10

AnTi-hOppinG CLUTCh

This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid rear wheel chatter by

allowing the clutch to "slip" during downshifts and deceleration. This allows for better traction, wheel stability, and

higher corner entry speeds. It also puts less fatigue on the drive train. This clutch is developed for race track use.

611.12.005.144 07 – 10

MOUnTinG KiT FOR STEERinG DAMpER

1618.0D03 07–10

STEERinG DAMpER

From model year 07 you need mounting kit 611.12.005.144 .

611.01.134.029 / 30

07 – 10

CnC TOp TRipLE CLAMp

For mounting of the handlebar you also need the handle-

bar support 6110103904430. Using the top triple clamp

61101134029/30 needs 2 pcs. bushing 61101035000 and

2 pcs. screw 61111064000 for mounting the starter lock.

611.03.038.044 07–10


These CNC machined foot pegs are made of high-

strength aluminum. They feature replaceable components

and allow for 6 position adjustments.

610.34.030.100 07–10




51990 SUpER DUKE»

611.09.960.000

07–10

wAVE BRAKE DiSC 320 MM









611.09.099.000 611.09.099.000 / 20

RiM STiCKER SET

Ready cut sticker for adding on front and

rear rim.

620.10.965.118


The Black Scale chain by RK is a

performance chain that combines

great technical features with an

excusive appeal coming from its black

hard coated plates with brassed pins

and rollers. 118 length.

626.09.099.000



611.10.051.037 / 04 Z37 611.10.051.038 / 04 Z38 611.10.051.040 / 04 Z40611.10.051.041 / 04 Z41

SpROCKET

If you think a steel sprocket is too heavy and an aluminum sprocket

wears out too quickly then we have the perfect sprocket for you!

A steel outer chain ring combined with an inner aluminum carrier

combines the best of both worlds to create a light weight long lasting

sprocket. This not only increases rear sprocket life but also the

front sprocket and chain life for up to 3 times compared to normal

sprockets. If you are looking for the highest quality sprocket available

and one that matches the image of your KTM your search is over!

770.13.920.000 07–10

BRAKE BLEEDER SCREw

Brake system bleeding made simple. By installing this new bleeder screw with special holding

valve, you simply open the screw of the return-valve a half turn and pump the brake fluid through

the brake system. The special holding valve prevents air getting sucked back into the system.

The result: you don't need to have a second person to pump or open and close the bleeder screw.

Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap.

77013920000 for rear brake caliper 07-10. 77013920100 for front brake caliper 07-10.

770.13.920.100 07–10

BAnJO BOLT wiTh BLEEDER FUnCTiOn

– Fast bleeding– Easy handling– premium materials

Brake Bleeder screw

53990 SUpER DUKE»

690.09.001.044 07–10FROnT 3,5" x 17"

611.10.801.044 07–10REAR 5,5" x 17"

MARChESini ALUMinUM whEELS

Forged Rims, directly descended from racing. Due to a special developed multi-

directional forging process, and detailed force vector analysis, these wheels offer a

maximum weight reduction and very high rigidity values, for ideal transfer of brake

and acceleration forces. Weight of wheel set app. 8.6 kg.

610.07.011.100 07–10

TAnKpAD

611.07.909.000 07–10

TAnK CAp STiCKER

U690.9852

TiRE wARMERS










55990 SUpER DUKE»

611.12.035.044 07–10


600.12.035.100 07–10

ALARM SYSTEM

Plug and Play Fail safe twin circuit

immobilization. Water and vibration resistant

resin bonded construction. Integrated

microchip movement sensor. Seat secured

with Reed switch.v 2x waterproof anti-scan,

anti-grab rolling code remote transmitters.

Lithium transmitter battery (3 year life).

610.12.019.000 07 – 10

TAnK BAG

Made with extra tough zippers and abrasion-

resistant edging of reflex material. Adjustable size

main compartment, two smaller compartments,

map sleeve. Total capacity: 15 litres. Carrying

handle, shoulder strap and rain cover included.

601.12.178.000

ZippER LOCK

Avoids thieves' quick entry

to your luggage! For use on

610.12.019.000.

620.02.903.050

07–10

GpS / pDA BAG SMALL

Great travel bag to help keep electronics dry and shock

secured. Dimensions: 140 x 90 x 35mm.

620.02.903.150

07–10

GpS / pDA BAG BiG

Dimensions: 170 x 130 x 35 mm.

620.02.903.000

05 – 11

SUppORT FOR GpS / pDA BAGS

For mounting on the stock handlebar supports!

610.12.032.000 07 – 10

RADiAL ROADLOK ®

The patented technology powering each RoadLoK® powersport locking system provides

100% safe anti-theft locking security due to the system's permanently-mounted

lock body--which literally becomes a part of the vehicle's frame. The frame-mounted

solution eliminates movement completely while the system is engaged--the very

movement which makes disc locks, padlocks, and chains so very dangerous if the

rider forgets to remove those devices before attempting to ride off. Additionally, the

removable BrakeBoltT pin, which keeps the bike locked right where the rider parks

the vehicle, guarantees that the system will never accidentally lock while the rider

is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.

57990 SUpER DUKE»

611.08.065.100 07 – 11

TOURinG winDSCREEn

We recommend the touring windscreen for longer trips.

610.01.043.018 07–10

hAnDLEBAR RiSER

18 mm.

611.07.940.000 07–10

ERGO SEAT

Only for 990 Super Duke R.

610.07.040.100 / 30

07–10

ERGO SEAT

The gel insert will increase the comfort especially

on long trips. Not useable for R-Version.

620.14.949.000 07–10

ADApTiVE BRAKELiGhT



light alerting traffic behind you.

59990 SUpER DUKE»

61611.32.000.100

950950950950950950950950950950950950950950950950950950950950950950950950950950950950950////////990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 supermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermotosupermoto

586.08.001.000 / 49 950 SM 06–07

CARBOn hEADLiGhT MASK

Finest carbon for an elegant

appearance and reduced weight.

611.08.110.000 / 49 990 SM T 10 – 11

CARBOn FROnT FEnDER


625.01.094.000 / 49 950 SM 06 – 07 990 SM R 10 – 11

CARBOn SpLASh pROTECTiOn



625.08.050.000 / 49 LEFT950 SM 06 – 07

625.08.051.000 / 49 RiGhT950 SM 06 – 07

CARBOn SpOiLER

Finest carbon for an elegant appearance and

reduced weight. Not for use on R models.

610.08.014.000 / 49 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11


Finest carbon for an elegant appearance

and reduced weight.

600.30.086.000 950 SM 06 – 07990 SM T 10 – 11990 SM R 10 – 11


Effective protection against stones; made from

Carbon Kevlar.

600.30.085.000 950 SM 06 – 07990 SM T 10 – 11990 SM R 10 – 11

CARBOn iGniTiOn COVER pROTECTOR


Carbon Kevlar.

600.30.060.000 / 49 950 SM 06 – 07990 SM T 10 – 11990 SM R 10 – 11



63950 / 990 SUpERMOTO»

625.05.099.000 950 SM 06 – 07 990 SM R 10 – 11

TiTAniUM SiLEnCER SET

59% lighter, slip-on silencer increases performance compared

to the stock silencers. Muffler inserts can be removed for sports

riding. Special mapping from an authorized KTM Street dealer

required for proper performance. For closed course use only.

600.05.099.300 950 SM 06 – 07 990 SM R 10 – 11

FMF STAinLESS STEEL SiLEnCER SET

These stainless steel slip-on silencers offer a great price

performance ratio. The use of high quality INOX stainless

steel means that these silencers are built to last. Total

weight of both silencers together is 9.8 lbs. Over 50% lighter

than the stock silencers. They also feature removable spark

arrestor inserts. For closed course use only. 626.05.099.200

950 SM 06 – 07 990 SM R 10 – 11


The Akrapovic SLIP-ON system is a starting-level tuning component . It is an

excellent combination of price, performance, top-quality materials and production

quality. Mounting only possible with original headers. Approx. 9 kg less weight

and more performance. Special mapping from an authorized KTM Street dealer


620.05.099.000 990 SM T 10 – 11


59% lighter, slip-on silencer set increases performance

compared to the production exhaust. Optional muffler

inserts can be removed for sports riding. Special mapping

from an authorized KTM Street dealer required for

proper performance. For closed course use only.


The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze that little bit more out of

their Supermoto. The complete system delivers an improved torque curve to the back wheel and saves a lot of weight, improving

handling not to mention the sharp appearance. The design of the muffler for the Akrapovic Racing and Evolution systems fits

exceptionally well to the aggressive supermoto look. The exhaust is configured as a 2-1-2 system, with two conical header tubes

leading into a Y collector, then into a cylindrical Y link pipe and finally onto the two mufflers. The difference between the Racing

and the Evolution mufflers is in the materials used. The Racing system uses high quality stainless steel, while the Evolution

uses a special type of titanium The performance characteristics of the two systems are identical. The individual components are

connected with sleeve joints secured with silicon-shielded springs. For the KTM Supermoto we fitted the new design Akrapovic

mufflers, which are attached to the frame using Akrapovic carbon-fiber clamps. The muffler outer sleeves are titanium, as are the

perforated inner tube, inlet cap and outlet tube. The outlet tube is formed using the hydroforming process accurate to the last

millimeter. The outlet cap for the Supermoto is made of carbon. The result is impressive 9 kg less weight and significantly more

performance. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

625.05.099.300 950 SM 06 – 07 990 SM R 10 – 11


626.05.007.100

950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11


626.05.007.200

950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

RACinG STAinLESS STEEL hEADER

620.05.099.200

990 SM T 10 – 11



780.13.920.000

990 SM R 10 – 11

BRAKE BLEEDER SCREw

770.13.920.100 950 SM 06 – 07990 SM T 10 – 11


Brake system bleeding made simple. By installing this new bleeder screw

with special holding valve, you simply open the screw of the return-valve a

half turn and pump the brake fluid through the brake system. The special

holding valve prevents air getting sucked back into the system. The result:

you don't need to have a second person to pump or open and close the

bleeder screw. Changing the brake fluid or bleeding the system is done in

seconds. Comes with anodized mud cap. 77013920100 for front brake

caliper 05-10. 78013920000 for front brake caliper 990 SM-R 09-11.

610.04.037.050 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11


610.13.009.100 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

CnC BRAKE-FLUiD RESERVOiR COVER



SXS.05.450.220 990 SM T 10 – 11 990 SM R 10 – 11

SXS.05.450.230 950 SM 06 – 07

CnC hYDRAULiC CLUTCh COVER



600.30.126.200 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

CnC CLUTCh COVER

High-quality, CNC-machined outer clutch cover

with factory look. Made of high-strength aluminum.

600.13.059.200 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

CnC MAin BRAKE CYLinDER COVER

CNC-machined version made of high-strength aluminum.

U691.0017 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

ThROTTLE CAM SYSTEM

Precision machined aluminum throttle tube with delrin inserts for smooth throttle action.

Includes three updated cam profiles designed to give different throttle response with fuel

injected bikes.

611.32.000.100 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

AnTi-hOppinG CLUTCh


rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration. This

allows for better traction, wheel stability, and higher corner entry speeds. It also puts less

fatigue on the drive train. This clutch is developed for race track use.

772.30.002.060 / 04 950 SM 06 – 07990 SM T 10 – 11990 SM R 10 – 11



620.10.965.118






611.10.051.038 / 04 Z38 611.10.051.040 / 04 Z40611.10.051.041 / 04 Z41

SpROCKET

If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect

sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both

worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front

sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality


620.12.940.050 950 SM 06 – 07990 SM T 10 – 11990 SM R 10 – 11

MiRROR EXTEnSiOn

If you want to improve your rear view, this is the solution for you.

Mounts betweens the stock mirrors and adapters.

620.04.912.000

990 SM T 10 – 11990 SM R 10 – 11

pRELOAD ADJUSTER REAR ShOCKThis shock preload adjuster allows for quick adjustment with just a T-handle wrench. Unlike other preload

adjusters this one has a mechanical drive mechnism that allows the use of the entire thread range. Great for

adjusting the shock for luggage or two up riding.

– Easy adjustability– improved appearance

Preload adjuster rear shock

71

611.10.051.038 /04 Z38611.10.051.040 /04 Z40611.10.051.041 /04 Z41




611.09.099.000611.09.099.000 / 20

RiM STiCKER SET


and rear rim.

626.09.099.000



690.09.001.044 05 – 11FROnT 3,5" x 17"

611.10.801.044 05 – 11REAR 5,5" x 17"





and acceleration forces. Weight of wheel set app. 8.6kg.

630.03.094.044 / 30630.03.094.044 / 04

950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

FRAME pROTECTiOn SET


620.14.949.000 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

ADApTiVE BRAKELiGhT

Add increased visibility on the road. In the event

of hard braking, the control unit pulses the rear

brake light alerting traffic behind you.

610.03.045.200 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

CRASh BOBBinS FROnT

Protects your forks in the event of a crash.

610.03.046.200 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

CRASh BOBBinS REAR

Protects your swingarm in the event of a crash.

625.12.035.044 950 SM 06 – 07


626.12.035.044 990 SM T 10 – 11 990 SM R 10 – 11


600.12.035.100 950 SM 06 – 07

ALARM SYSTEM

Plug and Play Failsafe twin circuit immobilization. Water and vibration

resistant resin bonded construction. Integrated microchip movement

sensor. Seat is secured with Reed switch. 2 x waterproof anti-scan,

anti-grab rolling code remote transmitters. Lithium transmitter battery

(3 year life-span). 625.12.035.044 necessary for mounting.

601.12.035.000 990 SM T 10 – 11 990 SM R 10 – 11

ALARM SYSTEM

Plug and Play Fail safe twin circuit immobilization. Water and vibration

resistant resin bonded construction. Integral movement sensor.

Storage box is also secured. 2 x waterproof anti-scan, anti-grab

rolling code remote transmitters. Lithium transmitter battery

(3 year life), 62612035044 necessary for mounting.

613.03.946.044 950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

CRAShpAD FOOTpEG

Crashpads for mounting on the passenger footpegs.

610.12.032.000 990 SM T990 SM R

RADiAL ROADLOK ®

The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-theft

locking security due to the system's permanently-mounted lock body--which literally becomes a part of the

vehicle's frame. The frame-mounted solution eliminates movement completely while the system is engaged-

-the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider forgets to

remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps

the bike locked right where the rider parks the vehicle, guarantees that the system will never accidentally

lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.


620.03.022.000 990 SM R 10 – 11990 SM T 10 – 11

CEnTER STAnD

Lifts your back wheel off the ground for tire changes

and maintenance.

620.12.099.044 990 SM R 10 – 11990 SM T 10 – 11

EnGinE pROTECTiOn

This aluminum engine protection not only looks

great, it offers maximum protection against stones

and other flying debris.

620.12.068.000 990 SM 08 – 10990 SM T 09 – 11990 SM R 09 – 11

TAnK pROTECTiOn

Plastic coated tubular steel bars, which securely

attach to the frame.

601.03.923.050 990 SM 08 – 10990 SM T 09 – 11990 SM R 09 – 11

STAnD pLATE BiG

With this larger stand plate, your bike always stands

securely, even on soft ground.

777777950 / 990 SUpERMOTO»

600.12.027.252

BACKREST FOR TOpCASE 37

The optional backrest provides

passengers more comfort.

625.12.027.150

950 SM 06 – 07

626.12.027.050 990 SM R 10 – 11

CARRiER pLATE FOR TOpCASE

For Top case 37, 46 and rear bag

600.12.078.000 or 600.12.078.100.

600.12.078.100

REAR BAG

Bag with quick-lock system for easy mounting. The

volume of the bag can be varied between 12 and

18 liters. The following carrier plates are required

for mounting: 950 Supermoto 625.12.027.150;

for 990 Supermoto, 626.12.027.050.

600.12.027.500

TOpCASE 37

This top case with a storage capacity of 37 liters makes use of the practical

press-lock system for simple opening and closing. The following carrier plates

are required for mounting: 950 Supermoto 625.12.027.150; 990 Supermoto

626.12.027.050. No additional carrier plate required for mounting on the

990 SM-T. The top case can be mounted directly on the original installed

parts. Size: 49 x 40 x 31 cm.

750.12.019.100 990 SM T 10 – 11

TAnK BAG

Compact tank bag with enough capacity for longer trips. The new closures guarantee it fits perfectly

on the bike without restricting your movement. Two outer pockets take small items like cell phones,

wallet, keys etc. The included map pocket makes child's play of navigation. Includes carry handle and

waterproof innerbag. Finished with extra robust zipper closures. Total volume approx. 22 liters.

626.12.019.100 990 SM R 10 – 11

TAnK BAG

Made with extra tough zippers and fitted with abrasion-resistant

material at the edges. Main compartment plus one smaller

compartment, removable map sleeve. Easy mounting system.

Total capacity 12 liters. Handle and rain cover included.

620.12.025.100 990 SM T 10 – 11

SiDE BAGS

These side bags were specially designed for the 990 SM-T. They not only follow the layout of

the line and color of the bike, but were also specially designed to fit the original carrier. This is a

lightweight and very quick mounted luggage solution for the next tour. Includes waterproof inside

pockets. With the optional locking kit 620.12.928.000 you can achieve a theft deterring luggage

system. Appr. volume 2 x 13L.

600.12.027.600

TOpCASE 46

This top case with a storage capacity of 46 liters

easily holds two full-face helmets. It features

the latest generation of snap-shut locking

mechanism. The case boasts an extremely elegant

design with great personality. The following

carrier plates are required for mounting: 950

Supermoto 625.12.027.150; 990 Supermoto

626.12.027.050. No additional carrier plate

required for mounting on the 990 SM-T. The

top case can be mounted directly on the original

installed parts. Size: 58 x 42 x 31 cm.

600.12.027.352




756.12.978.000

UniVERSAL REAR BAG / BACKpACK

This new designed bag can be used as rear bag on the carrier

plate of the bike, or as a backpack. By using the circular zip, the

volume can be increased very simply. The bag offers a raincover,

an additional storage room for small items and rubber straps on the

top to fix a jacket, gloves, etc.


625.12.025.000

SiDE BAGS

High quality robust saddlebags for long trips; includes

interior rain protector. 62512020000 or 62612020000 is

necessary for correct mounting. Volume appr. 18 Liters.

625.12.019.200 950 SM 06 – 07990 SM T 09 – 11

TAnK BAG

Made with extra tough zippers and is fitted with abrasion-resistant material

at the edges. Generous adjustments possible to main compartment; four

smaller compartments, removable map sleeve. Easy mounting system. Total

capacity 18 liters. Handle, shoulder strap and rain cover included.

625.12.020.000 950 SM 06 –07

626.12.020.000 990 SM R 10 – 11

CARRiER SYSTEM

Rigid steel tubular construction . Simple installation without any

modification to the passenger foot pegs; perfect load distribution

on the existing mounting points on the chassis.

620.12.092.044

SUppORT FOR GpS BRACKET

Universal application possibilities for

mounting the GPS holder.

601.12.078.000

ROLLBAG

Completely water proof duffle bag that can

be rolled up for flexible volume. Includes

attachment straps and shoulder strap.

Great for keeping clothes and camping

equipment dry!

601.12.978.044 950 SM 05 – 08990 SM 08 – 10990 SM T 09 – 11 990 SM R 09 – 11

EXTEnDED CARRiER pLATE

Ideal for transporting your luggage bag. Cannot be used

for mounting a Topcase.

626.12.020.050

990 SM R 10 – 11

SiDE BAGS / CARRiER KiT

Use the specially designed SM-T side bags, and the nearly invisible SM-T original

carrier for your 990 SM/SM-R, from MY09 on. Kit includes side bags, carrier system

and all necessary mounting material with mounting manual.

Important notice:

If you use already an Akrapovic Exhaust you need:

- Evolution (62505099300, 62605099300): mounting kit 62005099010

- Slip-on (62605099000, 62605099200): mounting kit 62005099010 and Y-pipe

62005099050

If you plan to buy an Akrapovic Exhaust after you have mounted the Carrier kit,

please order one of the Exhaust system for SM-T.

Carrier Kit can not be combined with the Slip-on 62505099000! Can be used on

bikes with VIN higher than VBKVS94009M960440!

620.02.903.000


For mounting on the stock

handlebar supports!

620.02.903.050

GpS / pDA BAG SMALL

Great travel bag to help keep

electronics dry and shock secured.

Dimensions: 140 x 90 x 35mm

620.02.903.150

GpS / pDA BAG LARGE



600.12.025.100 / 30

ADVEnTURE CASE SET

Two, absolutely water-proof, practically indestructible top-loading side bags

(left and right), with 2 integrated 3-liter water containers. Fits the Adventure

luggage rack system (not included). Double-wall plastic construction

throughout, with robust metal locks on the tops and sides. Capacity:

approx. 2x32 liters; 48x27x36 cm. Inside pocket : 600.12.025.060

601.12.920.000

LOCK FOR qUiCKLOCK CARRiER SYSTEM

Locks your Quicklock carrier system on your bike.

600.12.025.090

FOR 600.12.025.100 / 30

LUGGAGE hOOK SET

601.12.178.000

ZippER LOCK

Avoids thieves' quick entry to your luggage! For use

on 62612019000, 62612019100, 60012078000,

60012078100, 62012025100, 62512019200,

60112078000, 62512025000 and 75012019100.

620.11.042.044 990 SM T 10 – 11

OUTLET KiT

Necessary when a source of power is

needed for a navigation system or for

any other use.

620.12.020.100

990 SM T 10 – 11990 SM R 10 – 11

qUiCKLOCK CARRiER SYSTEM / ADVEnTURE CASE

620.12.020.200

990 SM T 10 – 11990 SM R 10 – 11

qUiCKLOCK CARRiER SYSTEM / BLACK ALU CASE

This kit contains the quicklock carrier system (which stays on the bike) and the adapters for

our KTM Adventure cases. With the adapters removed the carrier system is almost invisible.

Cases not included.

– quick mounting and dismounting– Luggage rack is blended into the stock appearance– Lockable

Quicklock carrier system


601.12.024.200

BLACK ALUMinUM CASE LEFT

601.12.025.200

BLACK ALUMinUM CASE RiGhT

These new style travel cases are made of two ultra strong

materials. The sidewalls are made of high strength

aluminum and the corners are made of impact-resistant

plastic parts. The components are vary durable and water-

proof bonded by a specially developed riveting technology!

Volume of each case is app. 37 L. To secure your luggage

an additional lock kit 60112023050 (includes 4 locks for

both cases) is available. To secure side cases and top case,

please order the lock kit 60112023150 (includes 6 locks).

Optional inside pockets available: 60112024070.

601.12.024.060

SiDECASE CARRiER BELT

Adding this belts to your side cases, you can easily

take them with you in the hotel room or your tent.

601.12.027.000

BLACK ALUMinUM TOp CASE

38L volume. Optional inide pockets

available: 601.12.027.070


626.08.065.000 990 SM R 10 – 11

TOURinG-winDSCREEn

We recommend the touring windscreen

for longer trips.

620.08.965.000 990 SM T 10 – 11

TOURinG winDSCREEn


625.07.040.100 / 30 950 SM 06 – 07

ERGO SEAT

Gel insert increases comfort especially on long trips.


620.07.040.100 990 SM T 10 – 11 990 SM R 10 – 11

ERGO SEAT

602.12.092.060 990 SM T 10 – 11

UniVERSAL pLUG

Necessary for the modification of the power supply

cable of the navigation system to be able to fit with

the socket 620.11.042.044.

626.08.050.000 / 20A 990 SM T 10 – 11

SpOiLER whiTE LEFT

626.08.051.000 / 20A 990 SM T 10 – 11

SpOiLER whiTE RiGhT

Note: The white of the PowerParts spoiler is not

identical to the white of the 2011 white SM T!


89601.12.025.200

950950950950950950950950950950950950950950///990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure

600.07.213.050 03 – 05

CARBOn TAnK pROTECTOR

Super light Carbon / Kevlar protection.

600.30.060.000 / 49 03 – 11



600.30.086.000 03 – 11


Effective protection against stones,

Made from Carbon-Kevlar.

600.30.085.000 03 – 11




91950 / 990 ADVEnTURE»

601.05.099.000 03 – 11


Save weight, add more torque and a pleasant exhaust note to your

Adventure with this carbon tipped slip-on silencer set. Includes

removable sound reduction inserts. For off-road use only.

600.05.099.000 03 – 11


59% lighter slip-on silencer that will also add power when

compared to the series production exhaust. Includes removable

sound reduction inserts. For off-road use only.

600.05.099.300

03 – 11


These stainless steel slip-on silencers offer a great price performance ratio. The

use of high quality INOX stainless steel means that these silencers are built to last.

Total weight of both silencers together is 9.8 lbs. Over 50% lighter than the stock

silencers. They also feature removable spark arrestor inserts. For off-road use only.


601.12.035.000 07 – 11

ALARM SYSTEM

Plug and Play Failsafe twin circuit immobilization. Water and vibration resistant resin bonded

construction. Integral movement sensor. Storage box is also secured. 2 x waterproof anti-

scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life),

60112035144 necessary for mounting.

601.12.035.144 07 – 11


600.12.068.100 03 – 11

CRASh BARS

Plastic-coated tubular steel bars, which securely attach to the frame.

600.12.072.000 03 – 11

TRAnSpAREnT TAnK pROTECTiVE STiCKER SET

Help save the paint from scuffs when riding

off road.

620.14.949.000 03 – 11

ADApTiVE BRAKELiGhT


of hard braking, the control unit pulses the

rear brake light alerting traffic behind you.

601.03.923.050 03 – 11

STAnD pLATE BiG

With this bigger stand plate, your bike always

stands securely, even on soft ground.

630.03.094.044 / 30630.03.094.044 / 04

03 – 11


950 / 990 ADVEnTURE» 95

600.08.008.100 03 – 11

TOURinG winDSCREEn

Helps eliminate wind buffeting and

protects against fatigue. This taller

windscreen is approx. 4 1/2" taller

and 4" wider on each side over the

stock wind screen.

584.01.043.018 03 – 11

hAnDLEBAR RiSER

18 mm.

600.07.040.100 03 – 11

ERGO SEAT

Approx. 20 mm lower seat with gel insert. The gel

insert increases comfort, especially on long trips.

601.12.064.044 03 – 11

hEATED GRip SET

The heating grips, adjustable to two levels ensure you

have warm hands even when the weather is bad. Grips

have holes for mounting on the hand guards.

582.14.069.044 03 – 08

TRip-MASTER SwiTCh

The switch comes with all necessary add-on parts.

U691.0017 06 – 11

ThROTTLE CAM SYSTEM





620.12.940.050 03 – 11

MiRROR EXTEnSiOn

If you want to improve your rear view, this is the solution

for you. Mounts betweens the stock mirrors and adapters.

613.03.946.044 03 – 11

CRAShpAD FOOTpEG


the passenger footpegs.

950 / 990 ADVEnTURE» 97

600.12.027.400 / 30

TOpCASE ADVEnTURE

Adventure Top case with an internal volume of 42 liters.

For mounting you need also the bracket 600.12.027.450.

Backrest 600.12.027.452 and Inside Pocket

600.12.027.453 are optional available.

600.12.025.100 / 30

ADVEnTURE CASE SET

Two absolutely waterproof, practically indestructible top-loader side cases (left and right), with

integrated 3-liter water container (2 x). Suitable for the Adventure luggage rack system (not included).

Double-wall plastic construction all round, with robust metal locks on the top and sides. Volume:

approx. 2 x 32 liters; 48 x 27 x 36 cm – matching inside pocket = 600.12.025.060

600.12.027.450

BRACKET FOR TOpCASE

For top case 600.12.027.400 and 600.12.027.400/30.

600.12.020.100 03 – 11

CASE CARRiER SYSTEM

Rigid steel tubular construction for mounting of all available case sets. Simple

installation, without any modification of the passenger foot pegs, perfect

load distribution on the existing mounting points on the chassis.

601.12.929.050 03 – 11

BRACKET FOR TOpCASE

For top case 601.12.929.000

601.12.929.000

ALUMinUM TOpCASE 38 L

Size approx. 31 x 40 x 30 cm.

601.12.924.000

ALUMinUM CASE 38 L

Durable, water-proof individual bags made of 1.5 mm aluminum without edge welding

seams. Rounded constrution with robust plastic protectors on the corners. Can be used

on right and left sides. Fits the luggage rack system 600.12.020.100 (not included). Two

locking mechanisms with articulation function for the cover, locking eyelets on the top and

mounts for additional locks. Capacity: approx. 38 liters; 44 x 24 x 39 cm – Inside Pocket

= 600.12.025.060.

600.12.025.090

LUGGAGE BRACKET SET

FOR 600.12.025.100 AND

600.12.025.100 / 30

950 / 990 ADVEnTURE» 99

601.12.024.200


601.12.025.200


These new style travel cases are made of two ultra strong materials. The sidewalls

are made of high strength aluminum and the corners are made of impact-resistant

plastic parts. The components are vary durable and water-proof bonded by a

specially developed riveting technology! Volume of each case is app. 37 L. To

secure your luggage an additional lock kit 60112023050 (includes 4 locks for both

cases) is available. To secure side cases and top case, please order the lock kit

60112023150 (includes 6 locks). Optional inside pockets available: 60112024070.

601.12.020.100

03 – 11

qUiCKLOCK CARRiER KiT / ADVEnTURE CASE

601.12.020.200

03 – 11

qUiCKLOCK CARRiER KiT / BLACK ALU CASE

This kit contains the quicklock carrier system (which stays on the bike)

and the adapter for our KTM Adventure cases (which can be removed

within seconds from the bike). Cases are not included, please order

seperately! With removed adapters you will nearly not recognize that

you have mounted a carrier system on your bike for fullsize cases!

601.12.920.000

LOCK FOR qUiCK LOCK CARRiERSYSTEM


601.12.024.070

innER TRAVEL BAG

Keep your contents organized with this high

quality, multi compartment travel bag. For use

with the Black Aluminum Luggage.

601.12.024.060


Adding these belts to your side cases, you can easily


601.12.027.000


38 L volume. Optional inside pockets available:

601.12.027.070.

756.12.978.000

UniVERSAL REAR BAG / BACKpACK

This new designed bag can be used as rear bag on the carrier



an additional storage room for small items and rubber straps on

the top to fix a jacket, gloves, etc.

950 / 990 ADVEnTURE» 101

601.12.078.000

ROLLBAG





equipment dry!

600.12.019.100 03 – 11

TAnK BAG

Tank bag for mounting on the tank. Made with extra tough zippers

and abrasion-resistant edging of reflex material. Adjustable size main

compartment, three smaller compartments, map sleeve. Total capacity:

18 litres. Includes carrying handle, shoulder strap and rain cover.

600.12.078.100

REAR BAG

Bag with Quick-Lock System for easy

mounting.The volume of the bag is

between 12 and 18 liters variable.

The bracket 600.12.027.550 is also

necessary for correct mounting.

600.12.027.252


Available as an optional extra, offers the

passenger more comfort.

600.12.027.500

TOpCASE 37

This topcase with an internal volume

of 37 liters is using the practical

press-lock-system. The bracket

601.12.927.044 is also necessary for

correct mounting. Size: 49 x 40 x 31 cm.

600.12.027.352




600.12.027.600

TOpCASE 46

This topcase with an internal volume of 46 litres is capable of holding two full-face

helmets. It features the latest generation snap-shut locking mechanism. It boasts an

extremely smart design with great personality. For mounting you also need the bracket

601.12.927.044. Size: 58 x 42 x 31 cm.

601.12.178.000

ZippER LOCK


luggage! For use on 601.12.078.000,

600.12.078.100, 600.12.019.100

and 600.12.078.000.

600.12.025.060

inSiDE pOCKET 35 L

The clever option to the aluminum suitcase system. Whether

you're staying in a tent or a hotel: your luggage is always

close at hand.

601.12.978.044


Perfect for fixing the roll bag.

601.12.927.044

BRACKET FOR TOpCASE

For Topcase 37, 46 and rear bag 600.12.078.000,

600.12.078.100 and Topcase 601.12.027.000.

950 / 990 ADVEnTURE» 103

601.12.092.050 03 – 08

MOUnTinG FOR GpS BRACKET

Necessary for mounting the GPS holder.

620.12.092.044 03 – 11


Universal application possibilities for mounting the

GPS holder.

601.12.092.150 09 – 11



601.12.092.180 03 – 11

GpS BRACKET FOR GARMin ZUMO 660

With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that

it does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070),

which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150)

for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

601.29.074.050 07 – 11

ChARGinG CABLE

Special charging cable for the 990 Adventure. Connect

the battery charger 58429074000 and the stock outlet

with the charging cable and the starter battery gets

charged. Very simple, but ingenious.

601.12.092.080 03 – 11


With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that it

does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070), which

can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the

950/990 Adventure whereby the navigation system is ideally positioned on the bike.

601.12.092.140 03 – 11

GpS BRACKET FOR TOMTOM RiDER 2

With this elegant lockable construction, your navigation system

can be mounted on your motorcycle so that it does not vibrate.

As well as the classic fastening on the handlebar cross member

(601.12.092.070), which can be used with almost all models,

there is a special edition (601.12.092.050 or 601.12.092.150)

for the 950/990 Adventure whereby the navigation system is ide-

ally positioned on the bike.

601.12.092.040 03 – 11

GpS BRACKET FOR TOMTOM RiDER





601.11.042.044 03 – 06

OUTLET KiT

Necessary for models 03 – 06 when a source

of power is needed for a navigation system or

for any other use.

950 / 990 ADVEnTURE» 105

602.12.092.060 03 – 11

UniVERSAL pLUG

Necessary for the modification

of the power supply cable of the

navigation system to be able to fit

with the socket 601.11.042.044.

600.12.073.044 03 – 08

ROADBOOK hOLDER KiT

Durable, water-proof mount incl. Handlebar remote control, on-board plug

and installation materials. Illuminated road book housing, electrically

powered with brake. Road book format: A5, up to 80 pages.

601.12.092.070 03 – 11

hAnDLEBAR SUppORT FOR GpS BRACKET

Universal application possibilities

for mounting the GPS holder. Can

also be used for other models.

620.10.965.118






601.10.051.042 / 04 Z42 601.10.051.045 / 04 Z45

SpROCKET

If you think a steel sprocket is too heavy and an

aluminum sprocket wears out too quickly then we have

the perfect sprocket for you! A steel outer chain ring

combined with an inner aluminum carrier combines

the best of both worlds to create a light weight long

lasting sprocket. This not only increases rear sprocket

life but also the front sprocket and chain life for up to 3

times compared to normal sprockets. If you are looking

for the highest quality sprocket available and one that

matches the image of your KTM your search is over!

620.02.903.050

03-11

GpS / pDA BAG SMALL




620.02.903.150

03-11

GpS / pDA BAG LARGE


620.02.903.000



handlebar supports!

950 / 990 ADVEnTURE» 107

SXS.05.450.220 03 – 11



610.04.037.050 03 – 11


600.13.030.100 03 – 11

BRAKE pADS FROnT

Sintered brake pad with the best price/performance

ratio. Will help reduce brake noise. Should be not

mounted on bikes with ABS System.

600.13.059.200 03 – 11

CnC FOOT BRAKE CYLinDER COVER


600.30.126.200 03 – 11

CnC CLUTCh COVER



600.13.003.100 03 – 11

CnC hAnD BRAKE CYLinDER COVER

CNC-machined design made of


770.13.920.000 03 – 11

BRAKE BLEEDER SCREw

Brake system bleeding made simple. By installing

this new bleeder screw with special holding valve,

you simply open the screw of the return-valve a

half turn and pump the brake fluid through the

brake system. The special holding valve prevents

air getting sucked back into the system. The

result: you don't need to have a second person

to pump or open and close the bleeder screw.

Changing the brake fluid or bleeding the system is

done in seconds. Comes with anodized mud cap.

770.13.920.000 for front brake caliper 03-11.

600.35.040.100 03 – 11

ALUMinUM RADiATOR pROTECTOR GRiLL

Black-coated aluminum, for better cooling.

780.09.099.000765.09.099.000

03 – 11

RiM STiCKER SET

Orange or black colored, ready cut sticker for

adding on front and rear rim.

772.30.002.060 / 04 03 – 11


950 / 990 ADVEnTURE» 109

690 LC4690 LC4690 LC4690 LC4690 LC4690 LC4690 LC4690 LC4111

584.10.051.048 / 04

750.30.045.050 / 49 SM / SMC / DUKE / EnDURO




756.08.010.000 / 49 DUKE

CARBOn FROnT FEnDER

756.04.050.000 / 49 DUKE

CARBOn hUGGER

113690 LC4»

765.05.991.000 / 49 EnDURO / SMC

CARBOn FROnT hEAT pROTECTOR

Only for use on Akrapovic Titanium Factory

Header 765.05.907.100. On 690 SMC also

useable for the stock header.

765.05.990.060 / 49 EnDURO / SMC

CARBOn REAR hEAT pROTECTOR

For Mounting on original Exhaust, but also for

use on Akrapovic Header 765.05.907.100

and Silencer 765.05.099.000.

765.05.990.050 / 49 EnDURO / SMC

CARBOn CEnTER hEAT pROTECTOR

For mounting on original Exhaust, but also for


and Silencer 765.05.099.000.

765.05.099.000 EnDURO / SMC

SLipOn TiTAniUM SiLEnCER

765.05.907.100

EnDURO / SMC

TiTAniUM FACTORY hEADERS

The Akrapovic system is designed for KTM riders who are looking

for the finest available aftermarket exhaust systems and know how

to get the most out of the increased performance on the track.

The system comes with the hexagonal design muffler, which goes

great with the sharp lines of your KTM. Removeable spark arrestor

included. Mounting possible with original header and also with

the factory header 76505907000. For closed course use only.

765.06.102.000 EnDURO / SMC

TUninG-KiT EVO 1

Stage 1 tuning kit containing the open air filter

cover. Note: For proper performance the special map

must be used. For closed course use only.

765.12.945.000 EnDURO / SMC

TUninG KiT EVO 1 COMpLETE

Stage 2 kit contains the high performance exhaust

system matched with the open air filter cover for solid

performance gains. Note: For proper performance the

special map must be used. For closed course use only.

765.12.945.200 EnDURO / SMC

TUninG KiT EVO 2

Give your 690 engine additional performance with

the KTM EVO 2 engine kit. This kit includes a K &

N cone style racing filter, revised racing cam shaft

and filter mounting kit. For maximum performance,

the Akrapovic exhaust system should be used with

this kit. Note: For proper performance the special

map must be used. For closed course use only.

765.12.945.100 EnDURO / SMC


Like 765.12.945.200 with additional

exhaust system.

756.12.945.100 DUKE

TUninG-KiT EVO 1

Give your 690 engine additional performance with the KTM

EVO 1 engine kit. This kit includes a K & N cone style racing

filter, revised racing cam shaft and filter mounting kit. For

maximum performance, the Akrapovic exhaust system should

be used with this kit. Note: For proper performance the


756.12.945.000 DUKE



exhaust system.

115690 LC4»

756.05.099.000 DUKE

EVOLUTiOn TiTAniUM SiLEnCER

This exhaust system is specially developed for the Duke. This means light

weight and maximum performance gains. Mounting only possible in combination

with the factory header 756.05.907.000. For closed course use only.

756.05.907.100 DUKE


765.05.099.200

EnDURO / SMC

SLip-On ALUMinUM SiLEnCER

Slip-on Silencer with very nice cost- performance ratio. The

combination of aluminum outer sleeve and stainless steel endcap

guarantees low weight and good durability. For closed course use only.

117690 LC4»

610.02.055.060 SM / DUKE

CnC CAp CLUTCh RESERVOiR

CNC machined design made of


765.01.099.025 / 04 EnDURO

CnC TRipLE CLAMp

Offset 22.5 or 25.5 mm.

765.01.199.035 / 04 SMC

CnC TRipLE CLAMp

Offset 32.5 or 35.5 mm.

750.01.099.033 / 04 SM / DUKE

CnC TRipLE CLAMp

CNC machined. Easy adjustable offset 30.5

mm or 33.5 mm. Front wheel and Fork

does not need to be removed for changing

the offset. Set includes pivot tube und

lower bearing. When using the offset 33.5

mm the steering lock is not useable. For

mounting of the handlebar you need one of

the three below listed handlebar supports.

610.13.009.100 SM / DUKE

CnC CAp BRAKE-FLUiD RESERVOiR



594.01.039.044 37 mm 594.01.039.144 47 mm

EnDURO / SMC

hAnDLEBAR SUppORT

Available in two different heights.

595.01.039.244

EnDURO / SMC

FACTORY hAnDLEBAR SUppORT

Three possible height adjustments,

28 mm, 37 mm, 46 mm.

SXS.05.450.220 SM / EnDURO / SMC




SXS.08.300.040 SM / DUKE / SMC / EnDURO

CnC KnOB ADJUSTER SET

CNC machined aluminum.

765.13.903.000 EnDURO

CnC hAnD-BRAKE CYLinDER COVER



611.01.039.044 / 30

hAnDLEBAR SUppORT

586.13.003.100 SM / SMC


CNC machined design made of high-strength

aluminum.

119690 LC4»

548.02.001.300 / 04 EnDURO / SMC

ORAnGE hAnDLEBAR

Laser etched positioning grid. Made for KTM exclusively by

Renthal. 604 Bend 28.5 mm large diameter clamping area.

Dimensions: A: 99 mm; B: 802 mm; C: 54 mm.

SXS.07.125.200

EnDURO / SMC

phDS pROGRESSiVE hAnDLEBAR DAMpinG SYSTEM

Advantages:

– Headshake and hard hits dampened.

– Vibrations from chassis and engine absorbed.

– Handlebars additionally damped in horizontal direction.

– Optimal steering precision.

– Handlebar height adjustable in two positions.

– Protects the hand and shoulder joints.

– Individual set-up possible due to the selection of different damping elements supplied.

– CNC-milled.

121690 LC4»

765.14.901.044 EnDURO / SMC

X2 LiGhT

The X2 Halogen lighting system features a

high quality 4" driving lamp and 2" spot lamp

to turn night into day! This self contained

lighting system is great for upgrading your stock

lighting. Meets DOT approval standards.

Comes with a black mask but a orange headlight

mask (780.08.907.000/04) is also available.

123690 LC4»

770.13.920.000 SM / DUKE / SMC / EnDURO

BRAKE BLEEDER SCREw


this new bleeder screw with special holding valve, you

simply open the screw of the return-valve a half turn

and pump the brake fluid through the brake system.

The special holding valve prevents air getting sucked

back into the system. The result: you don't need to

have a second person to pump or open and close the

bleeder screw. Changing the brake fluid or bleeding the

system is done in seconds. Comes with anodized mud

cap. 770.13.920.000 for rear brake calipers SM 07-

09, SMC 08-10, Duke 08-10 and front and rear brake

caliper Enduro 08-11. 770.13.920.100 for front brake

calipers SM 07-09, SMC 08-10 and Duke 08-10.

750.03.045.000 SM / DUKE / SMC

FROnT

750.03.046.100 SM / DUKE / SMC

REAR

CRASh pADS

Will protect your forks / swingarm in the event of a crash.

611.09.960.000 DUKE


Stainless floating disc with anodized orange center provides consistent brake performance under extreme

conditions. Even at the highest temperatures the outer disc does not bend or warp due to the advanced design

and race proven materials. The alloy center is lighter than original rotors and is race track approved. Specially

designed for the KTM superbikes this rotor is a great combination of improved performance and visual appeal.

600.13.030.100 EnDURO

BRAKE pADS FROnT

These pads provide consistent feel for use on high

speed tracks with higher braking demands. Works

perfect with stock brake-discs and also with the

wave-disc 61109960000. For race use only!

770.13.920.100 SM / DUKE / SMC


613.03.946.044 SM / DUKE

CRAShpAD FOOTpEG

Crashpads to be mounted on the passenger footpeg.


ADApTiVE BRAKELiGhT

Add increased visibility on the road. In the event of hard braking, the

control unit pulses the rear brake light alerting traffic behind you.

125690 LC4»

611.09.960.000

AVE BRAKE DiSC 320 MM


750.12.035.044 SM / DUKE


750.03.090.000 SM

SKiD pLATE

765.03.090.100 EnDURO / SMC

SKiD pLATE ALUMinUM

750.35.940.000 SM / DUKE

RADiATOR pROTECTiOn

600.12.035.100 SM / DUKE

ALARM SYSTEM


construction. Integral movement sensor. Seat is also secured. 2 x waterproof anti-scan, anti-grab

rolling code remote transmitters. Lithium transmitter battery (3 year life).


nEOpREnE FORK COVER

The perfect neoprene protection for your forks, for

use with closed fork protection.

U691.0017 SM / DUKE / SMC / EnDURO

ThROTTLE CAM SYSTEM

Precision machined aluminum throttle tube with delrin inserts for

smooth throttle action. Includes three updated cam profiles designed

to give different throttle response with fuel injected bikes.

690.34.931.044 SM / DUKE


Lightweight racing lever designed to bend away in

case of a spill. Fully adjustable.

690.13.950.044 SM / DUKE




127690 LC4»


EXTEnSiOnS REAR ViEw MiRROR

If you want to improve your rear view, this is the solution for you. Mounts

betweens the stock mirrors and adapters.

765.35.940.000 EnDURO / SMC

RADiATOR pROTECTiOn

756.12.962.044

SM / DUKE

BRACKET FOR U-LOCK

The practical solution, to fix the U-lock 600.12.016.000

on your bike. Made of steel. Black powder-coated.

756.12.918.000

SM / DUKE

BRACKET / U-LOCK KiT

As 756.12.962.044 but with U-lock 600.12.016.000.

601.03.923.050 EnDURO / SMC

STAnD pLATE BiG

With this bigger stand plate your bike stands really safe,

even on soft ground.

750.07.040.100 SM / DUKE

ERGO SEAT LOw

Duke: Height identical to standard seat /

Supermoto: – 20 mm.

756.07.040.100 SM / DUKE

ERGO SEAT MiD

Duke: + 20 mm / Supermoto: Hight identical

to standard seat.

765.07.940.000 EnDURO

ERGO SEAT

New developed seat foam adds all day

comfort. Height is similar to stock.

750.07.040.200 SM / DUKE

ERGO SEAT hiGh

Seat with gel insert. The gel insert will increase the comfort, especially on long trips.

Duke: +40 mm / Supermoto: +20 mm (measures compared to standard seat).


TAnK BAG





129690 LC4»

750.12.019.100

SMC / EnDURO

750.08.065.044 SM

TOURinG winDSCREEn

We recommend the touring

windscreen for longer trips.

756.08.065.100 DUKE

TOURinG winDSCREEn



765.08.065.000 EnDURO / SMC

TOURinG winDSCREEn



620.02.903.050

GpS / pDA BAG SMALL




620.02.903.150

GpS / pDA BAG BiG


620.02.903.000



131690 LC4»

750.12.027.150 SM / DUKE

BRACKET FOR TOpCASE

For Top case 37, 46 (page 97) and rear bag

600.12.078.000.

765.12.027.050 EnDURO / SMC

BRACKET

For rear bag 600.12.078.000, 600.12.078.100.

For mounting you need the suitcase carrier system

765.12.020.000, or the original provided handhold.

765.12.090.044 EnDURO

ROADBOOK CARRiER

Change your 690 Enduro into a Rally. Stable construction

for racing use. For mounting the roadbook carrier

600.12.073.000 the wiring harness 765.12.090.090

and remote control 600.12.073.080 are also required.


REAR BAG

Bag with Quick-Lock System for easy mounting. The

volume of the bag is between 12 and 18 liters variable.

The bracket 750.12.027.150 or 765.12.027.050

is also necessary for correct mounting.

756.12.978.000

UniVERSAL REAR BAG / RUCKSACK

This new designed bag can be used as rear bag on the carrier plate of the bike,

or as rucksack on the riders back. By using the circular zip, the volume can be

increased very simply. The bag offers a raincover, an additional storage room

for small items and rubber straps on the top to fix a jacket, gloves, etc.

133690 LC4»

765.12.920.000 EnDURO / SMC

SUiTCASE CARRiER SYSTEM

Rigid steel tubular construction for mounting of aluminum

cases. Simple installation, without any modification

of the passenger foot pegs, perfect load distribution

to the existing mounting points on the chassis.

600.12.025.060

inSiDE pOCKET 35 L

The clever option to the aluminum suitcase

system. Whether you’re staying in a tent, or

hotel: your luggage is always close to hand.

601.12.929.000


Size approx: 31 x 40 x 30 cm.

601.12.924.000

ALUMinUM CASE 38 L

Durable, water-proof individual bags made of 1.5 mm aluminum without edge

welding seams. Rounded constrution with robust plastic protectors on the corners.

Can be used on right and left sides. Fits the luggage rack system 765.12.920.000

(not included). Two locking mechanisms with articulation function for the cover,

locking eyelets on the top and mounts for additional locks. Capacity: approx.

38 liters; 44 x 24 x 39 cm – Inside Pocket = 600.12.025.060.

601.12.178.000

ZippER LOCK



601.12.078.000, 600.12.078.100

and 600.12.078.000.

601.12.078.000

ROLL BAG



attachment straps and shoulder strap. Great for

keeping clothes and camping equipment dry!

584.12.078.000

REAR BAG

Well thought out rear bag for all LC4 models with many small

compartments. For mounting on the luggage rack.

583.12.078.000

TOOL BAG

135690 LC4»

601.12.092.070


For GPS brackets page 105.

600.12.073.000

ROADBOOK

Electrical drive incl. paper brake, manual operation possible,

extra large paper roll: up to 80 A5 sheets (approx. 17 m),

Waterproof, Lighting included, opens and closes with no

tools, housing dimensions: (L x W x H) 197 x 124 x 70 mm.

If you want to mount the roadbook on the handlebarsupport

601.12.092.070 or on the roadbook carrier 582.12.090.144

you also need for mounting 600.12.173.070.

750.38.050.044 SM / DUKE

OiL COOLER SET

Specially developed for riders who use their Supermoto / Duke

on the race track. Thereby the oil temperature is always

indicated in the green area.

765.06.115.000 EnDURO / SMC

FOAM AiRFiLTER

765.07.008.060 EnDURO / SMC

FOAMRUBBER FOR TAnKCAp

Prevents dirt and mud from falling

into the tank when refueling.

772.30.002.060 / 04 SM / DUKE / SMC / EnDURO


750.38.041.100 SM / DUKE / EnDURO / SMC

OiLFiLTER CAp

CNC machined design made of high-strentgh

aluminum, orange anodized.

750.06.115.100 SM / DUKE

K&n AiRFiLTER

Increases airflow for more power and washable

for extended service life. Works great when

combined with the factory exhaust system.SXS.05.450.200

SXS OiL pLUG


137690 LC4»

765.08.999.000

EnDURO / SMC

GRAphiCS KiT BLACK

Not useable for Enduro R.

780.11.909.100 / 30

EnDURO R

hEADLAMp GRiD

780.01.094.100 / 04

EnDURO

FORK pROTECTiOn SET

780.01.094.100 / 30

EnDURO

FORK pROTECTiOn SET

765.08.013.000 / 30765.08.013.000 / 04

EnDURO / SMC

REAR FEnDER

765.08.001.000 / 30765.08.001.000 / 04

EnDURO / SMC

780.08.001.000 / 30780.08.001.000 / 04

EnDURO R

hEADLiGhT MASK

765.08.041.000 / 30 L 765.08.041.000 / 04 L765.08.042.000 / 30 R765.08.042.000 / 04 R

EnDURO / SMC

SiDEFAiRinG

L = Left, R = Right.

765.08.050.000 / 30 L 765.08.050.000 / 04 L765.08.051.000 / 30 R765.08.051.000 / 04 R

EnDURO / SMC

SpOiLER


765.08.010.000 / 30 765.08.010.000 / 04

EnDURO

773.08.210.000 / 30773.08.210.000 / 04

SMC

765.08.010.100 / 30765.08.010.100 / 04

EnDURO R

FROnT FEnDER

139690 LC4»

(A) (B)

U695.1087

hUB DECAL KiT

602.02.179.000 / 28602.02.179.000 / 04

hAnDGUARDS

5200.0024 ALL USD FORKS 43 MM (A)5200.0090 ALL USD FORKS 48 MM (B)5200.0091 ALL USD FORKS 48 MM (C)

FORK pROTECTiOn STiCKER SET

Extra thick material, protects your fork against stones.

590.03.090.250

FOAM

To be mounted between engine and skid

plate. Thereby, less mud can collect there

allowing the engine to cool better.

548.02.005.000

BAR EnDS

Eliminates the need to replace ripped-up grips

whenever your machine kisses the ground.

780.09.099.000

RiM STiCKER SET 21" / 18"

Ready cut sticker for adding on front and rear rim.

765.09.099.000

RiM STiCKER SET 21" / 18"

611.09.099.000 611.09.099.000 / 20

RiM STiCKER SET 17"

Ready cut sticker for adding

on front and rear rim.

780.02.979.000 / 28780.02.979.000 / 04

hAnDGUARDS

141690 LC4»

780.02.979.000 /28780.02.979.000 /04

hAnDGUARDS

602.02.179.000 /28602.02.179.000 /04

hAnDGUARDS

584.10.051.038 / 04 Z38584.10.051.040 / 04 Z40584.10.051.042 / 04 Z42584.10.051.044 / 04 Z44584.10.051.046 / 04 Z46584.10.051.048 / 04 Z48584.10.051.049 / 04 Z49584.10.051.050 / 04 Z50584.10.051.051 / 04 Z51584.10.051.052 / 04 Z52

REAR SpROCKET ORAnGE

This sprocket has steel teeth and an aluminum inner part.

Both sections are permanently joined by high strength rivets.

Stealth sprockets last at least 3 times longer than any other

aluminum sprocket whilst it is half the weight of a normal

steel sprocket. The steel teeth also offer greater life for your

whole system. Not just the sprocket, but the chain and front

sprocket as well. If you are looking for the ultimate in quality

and performance, this sprocket will meet your demand.

580.33.029.014 Z14580.33.029.015 Z15580.33.029.016 Z16580.33.029.017 Z17

FROnT SpROCKET

582.10.051.042 Z42582.10.051.045 Z45582.10.051.048 Z48582.10.051.050 Z50

REAR SpROCKET STEEL

Very durable, recommended for

long trips.

583.10.051.038 Z38583.10.051.042 Z42583.10.151.040 Z40583.10.151.045 Z45583.10.151.048 Z48583.10.151.049 Z49583.10.151.050 Z50583.10.151.051 Z51583.10.151.052 Z52

REAR SpROCKET

High strength aluminum, extra light.

503.10.800.118 / 04

5/8 x 1/4 (520)

ChAin Z RinG

The special Z-ring compresses when assembled creating a better seal.

This ensures smooth action and longer chain life. 118 link.

772.10.965.118

5 / 8 X 1 / 4 (520)

ChAin BLACK SCALE




exclusive appeal coming from

its black hard coated plates with

brassed pins and rollers. 118 link.

U695.1067 Z41U695.1068 Z44U695.1069 Z48U690.6815 Z49U695.1070 Z50U690.6816 Z51U695.1071 Z52

REnThAL SpROCKET

Made exclusively for KTM by Renthal, these orange

anodized rear sprockets are used by the KTM Race Teams.

Lightweight, durable and provide great performance.

143690 LC4»


FOOT-pEG SLiDERS

Fiberglass reinforced plastic material,

fits on all bikes with foot peg numbers

590.03.041.250 right and

590.03.040.250 left.

SXS.08.125.610

BLEEDER VALVE SET

Specially for WP Fork designed bleeder valves,

allowing quick and accurate removal of built up,

unwanted air inside your fork legs.

780.03.940.144

SMC / EnDURO

piVOTinG FOOTpEGS

Pivot Pegz have a unique & precisely tuned spring loaded pivoting action

that actively tracks with the motion of the riders feet. Used by thousands

of riders worldwide. Patented & race proven pivoting action improves grip,

comfort & control while actively promoting correct riding technique &

reducing fatigue.

548.03.040.000

ADJUSTABLE FOOTREST

These footrests offer a wide range of adjustability.

They can be tilted 5 degrees forward or backward,

and they can be raised or lowered by 6mm.

548.03.040.050

FOR 548.03.040.000

SLiDERS FOR ADJUSTABLE FOOTREST SET

145690 LC4»

TOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLSTOOLS147

U690.8840

610.29.055.130

SET OF RUBBER ADApTERS

610.29.055.600 RC8

FROnT hEADSTOCK STAnD

As 610.29.055.500 with additional location bolt

610.29.055.610, specially for RC8.

610.29.055.500 950 / 990 ADVEnTURE990 SUpER DUKE690 SM / DUKE


Front headstock stand should only be used

when rear wheel stand is already mounted.

610.29.055.400

REAR whEEL STAnD

For using the rear stand, you also need

one of the three possible adapter kits.

610.29.055.300 RC8 990 SUpER DUKE950 / 990 SM690 SM / DUKE / SMC640 DUKE


Including fork adapters, front wheel stand should only be

used when rear wheel stand is already mounted.

610.29.055.110 950 / 990 ADVEnTURE990 SUpER DUKE950 / 990 SMRC8690 SM / DUKE / EnDURO / SMC

wORKShOp ADApTERS


SET OF FORK ADApTERS wiTh BOBBinS


BOBBinS FOR REAR whEELSTAnD

U695.1277

FOLDinG BiKE RAMp

This lightweight KTM bike ramp is the best one we have

tested for daily use. This folding ramp is made of a high

strength aluminum, and designed for reliable easy use.

The ramp also incorporates a safety strap, when used

properly, keeps the ramp from sliding forward when

you are loading and unloading your bike. Total length is

~200 cm, folded its ~100 cm. Weighs less than 5,5 kg.

180 kg max. capacity.

TOOLS»

780.12.006.000

piT MAT

At many races already a must in the service zone! This mat helps

with finding fallen tools, bolts and other small parts when service

your KTM in the pit area. Due to the special material mix, it features

perfect protection against environmental pollution when quick

fueling during the race. The KTM design brings perfect factory look

to your service- and fuel zone. Dimensions: 160 x 100 cm.

– Factory look for your pitPit mat

149

451.29.075.000

REV METER

Usable on 4-stroke and 2-stroke engines,

displays up to 16,000 rpm.

U695.1439

VALVE CAp SET

U695.1099

TiRE GAUGE

0-60 PSI, This accurate gauge is a must have for

every KTM tool box. Features a stainless steel

braided line, rubber coated exterior and a pressure

release button.

773.29.068.000

TiRE GAUGE DiGiTAL

Comfortable and easy to use. Fits all currently

available valves. Pressure display in bar or

psi. Integrated pressure release valve for

accurate pressure adjustment. Switchable

display and work area lighting. Battery saver

mode by means of automatic switch-off. Max.

measurable pressure 11 bar / 154 psi.

U690.8840

SChRADER VALVE CAp SET

Orange anodized cap with schrader valve removal tool.

584.29.074.100

BATTERY ChARGinG AnD TESTinG UniT

Test, charge and store batteries: a fully automatic and protective

battery charger thanks to a programmed charging characteristic.

The well arranged LC-Display shows the charge state, reverse

polarity protection, short-circuit-protection, overload protection;

absolutely simple and safe. Plug for USA: 58429074004.

U690.9801

BATTERY ChARGER

Battery charger with test function. Further functions:

– Constant current charge,

– Constant voltage charge,

– Float charge.

Includes cable to fix on the battery with quick

plug to be connected to the charger.

773.12.030.000

FOOT-AiRpUMp

Mini-footpump with pressure gauge on the swivelling valve

head that fits all prevalent valves. Integrated double-

cylinder with pressure switch-over to high pressure. Max. 12

bar/160 psi. Height: approx. 170 mm folded together.

TOOLS»

U695.1130

ORAnGE CABLE TiES

100 pieces, length: 20 cm.

U695.1099

TiRE GAUGE


U6909.852

TiRE wARMERS










151







595.12.030.000

EXhAUST pLUG

Keeps water out of the silencer when

cleaning, for 15 – 38 mm inner diameters.

595.12.030.100

EXhAUST pLUG


cleaning, for 40 – 62 mm inner diameters.

812.12.016.000

wASh CAp FUEL hOSE

These wash caps cover the quick release connectors of the fuel

supply line. This allows you to remove your tank for service and

keep your fuel supply line clean.

U695.1562

pLASTiC DRUM

KTM orange plastic drum for race purpose.

Complete with flexible hose and twist-on

cap. Approximately 18 liters volume. In some

countries it is not allowed to use the drum for

transportation of fuel or to store fuel indoors.

590.29.050.000

FUnnEL

Specially designed to suit KTM fuel tanks.

This funnel has an optimised diameter to

suit two different filler necks and also has

an integral groove for perfect ventilation

during filling.

600.12.016.000

hiGh SECURiTY U-LOOK

Double closing U-type lock. Hardened steel body. 7 pin tubular lock, drill

protected, complies with best standards, 250,000 key variations, increased

resistance to picking, supplied with 2 keys. Rotative PVC lock protector.

Hardened steel shackle, resists hacksaws and boltcutters. Corrosion protection

by electrical deposit treatment, PVC coated. Tensile strength superior to 12 tons.

780.29.063.000

MEASURUnG CUp 1000 ML

Volume 1 L.. Features scale, perfect

for oil change on your bike. Easy

handling due to ergonomic form.

780.29.062.000 / 30

MAGnETiC BOLT pAn

With magnetic application, no more

lost screws!

625.12.007.000


No chance for dust, or unwanted scratches etc to damage

your bike, thanks to the KTM indoor bike cover which makes

your bike an eye-catcher in the garage aswell. The cover is

made from a special fabric with a distinctive structure that

does not allow dust or condensation to pass through. The

inner-side has a soft lining.

590.12.007.000

pROTECTiVE COVER OUTDOOR

Strong, lightweight bike cover that is UV and

water resistant. The sewn in elastic band

along the bottom keeps the cover secure to

the bike. Great for travel, this cover folds

up small into the supplied carrying case.

U695.1409

MAGnETiC BOLT pAn

An easy way to keep track of those bolts when

maintaining your KTM. Features a strong

magnetic bottom with a rubber coating.

TOOLS»

772.31.997.000/04

VEnT hOSE

Petrol resistant, perfect for tank and

carburetor ventilation. Approx. 3 meters

long. Should not be used as supply line.

601.12.919.000

hELMET LOCK AnD DRY BAG

This little package includes all you need to secure

your helmet on your bike. Incl. steel cord, number

lock and waterproof bag to carry the helmet.

OSE


OSE


153

579.29.020.000

ChAin BREAKER

5/8 x 1/4.

U690.7854

wiRE pLiERS

Safety wire your bike quickly and

securely using these specialty pliers.

548.12.061.000

SAFETY wiRE

Required for most road racing.

Stainless steel type 302/304 ASTM

wire. .025 mm diameter. 1lb.

510.12.093.000

TiRE iROn LOnG

U695.1045

TiRE iROn SET

510.12.091.000

SpOKE wREnCh

6 and 7 mm.

510.12.092.000

TiRE iROn SMALL

Special Tire lever optimized for KTM. Short version

ideal for the travelling tool kit. Longer version for

minimum effort when using.

583.10.025.000

AXLE GAUGE

503.05.017.000 / 04

SpRinG hOOK

Easy spring removal.

590.29.041.000 0,10; 0,12; 0,15; 0,20; 0,25.

590.29.041.100

0,05; 0,10; 0,15; 0,20; 0,25; 0,30; 0,35.

FEELER GAUGES

000.29.098.200

SCREw DRiVER SET

High quality 5 piece screw driver set

in KTM design.

U695.1188

CLEAninG KiT

Everything you need to keep your KTM

looking showroom clean. Kit includes

a 5 gallon KTM bucket, mud scraper,

1 liter spray bottle of Motorex Moto

Clean 900, 15 mm x 38 mm exhaust

plug, sponge, and a quick-dry towel.

TOOLS»

U695.1126

SpOKE TORqUE wREnCh

Avoid the common problem of overtightening your spokes.

This wrench is preset and lets you know when your spokes

are properly tensioned.

155

610.12.016.000

BRAKE LOCK

The assistance for loading the bike, or

lifting it with the rear wheel stand.

U691.0046

SOFT TiE DOwnS

These tie-down straps have soft ties built in, so

you don’t scratch your bars. KTM orange / black

with distinctive KTM Racing markings.

U691.0047

SOFT TiE DOwnS wiTh CLipS

Our KTM Tie-Downs feature built-in soft tie loops that allow you to secure your KTM without scratching your

handlebars. These extra wide webbing units feature a clip hook on one end, plus high quality friction lock

fasteners. KTM Orange/black with distinctive KTM PowerParts markings.

U695.5037

SOFT TiE DOwnS

These tough KTM soft ties allow you to strap down

your bike without scratching your handlebars or

tank. Built from a durable ballistic nylon, they have

a 615 LB weight capacity. Dimensions: 1.5" x 6’.

TOOLS»

601.12.002.000

TRAnSpORT hARnESS STREET

This transport harness allows a safe handlebar connection point

and moves the anchor point away from expensive body panels.

Together with one of the soft tie down sets, the bike is perfectly

secured on the way to the next race track. Harness features robust

plastic cups with rubber inlet to avoid damages to the handlebar.

000.29.098.100

TOOLBOX

With this 3 / 8" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the plastic parts

or carrying out an oil change on your KTM, you’ll find the right tool here. 60-item, orange tool box, high-quality chrome-vanadium

tools. Ratchet (with locking device), clamping bolt, two extensions and socket wrench. Nut spinners from 6 to 24, Allen keys from

3 to 10, Phillips, slotted, as well as Torx bits from 15 to 55.

000.29.098.000

TOOLBOX

With this 1/4" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the

plastic parts or carrying out an oil change, you‘ll find the right tool here. 38-item, orange tool box; high-quality

chrome-vanadium tools. Ratchet (with locking device), clamping bolt, two extensions and socket

wrench. Nut spinners from 4 to 14; Allen keys from 3 to 8; Phillips, slotted, as well as Torx bits.

157



OVERViEw»

690.08.032.000 / 49

CARBOn UnDERSEAT FAiRinG

690.04.050.000 / 49

CARBOn REAR FEnDER

690.08.042.000 / 49

CARBOn RiGhT REAR FAiRinG

690.08.043.000 / 49

CARBOn LEFT SEAT FAiRinG

690.08.044.000 / 49

CARBOn RiGhT SEAT FAiRinG

690.08.041.000 / 49

CARBOn LEFT REAR FAiRinG

690.08.055.000 / 49

CARBOn LEFT EXhAUST FAiRinG

690.08.056.000 / 49

CARBOn RiGhT EXhAUST FAiRinG

690.08.999.000

CARBOn DECAL

690.08.031.000 / 49

CARBOn REAR COVER

690.08.052.000 / 49

CARBOn LEFT SiDE REAR FAiRinG

690.08.053.000 / 49

CARBOn RiGhT SiDE REAR FAiRinG

690.07.025.000 / 49

CARBOn TAnK pAD LEFT

690.07.026.000 / 49

CARBOn TAnK pAD RiGhT

RC8» 17

DE REAR FAiRinG



STREET EVO JACKET

Street jacket with wind and waterproof, breathable PU

membrane. Removable thermal lining for warm weather

wear. Comfort collar, 3D protectors on shoulders and

elbows. Visco-elastic foam in back protector pocket

(SaS-Tec back protector available separately). Stretch

zones for extra mobility. Long and short connecting

zippers plus belt loop.

(39/6,5) 3pw101011(40/7,5) 3pw101012(41/8) 3pw101013(42/9) 3pw101014(43/10) 3pw101015(44/10,5) 3pw101016(45/11,5) 3pw101017(46/12) 3pw101018(47/13) 3pw101019

TECh TOURinG BOOT

Perfect for long journeys and touring. Made by

Alpinestars for KTM and designed to the highest

standard. Features a fully waterproof Gore-Tex©

membrane. Safety features include shin protector,

ankle protector and heel and toe reinforcements.

(39/6,5) 3pw101031(40/7,5) 3pw101032(41/8) 3pw101033 (42/9) 3pw101034(43/10) 3pw101035(44/10,5) 3pw101036 (45/11,5) 3pw101037(46/12) 3pw101038(47/13) 3pw101039

SUpERTECh R BOOT

Racing boots made with patented, bio-

mechanic, removable inner boot, with its

own closure mechanism. Other features

include: new air vent system; aerodynamical

extremely flat outer surface; aluminum

inserts at the heel. Comfortable entry

through a side zip which goes all the way to

sole. Exclusively for KTM by Alpinestars.

(S) 3pw111022(M) 3pw111023(L) 3pw111024(XL) 3pw111025

KTM BiOniC BACK pROTECTOR

CE Level 2 Impact performance (under 9kN transmitted force) in accordance

with EN 1621-2. Ergonomic 5 plate construction contours to the natural curve

of the back. Plates lock to lessen overextension of the back. Excellent shock

absorption even in repeated impacts. Thin, light, and substantially breathable core.

Adjustable shoulder straps. Wide waist belt. Exclusively for KTM by Alpinestars.

(S) 3pw111712(M) 3pw111713(L) 3pw111714 (XL) 3pw111715(XXL) 3pw111716

KTM Gp pRO GLOVES



bridge. Full grain leather construction. TPR detailing. Synthetic

suede palm reinforcement. Perforated leather panels for added

ventilation. Top of the glove is internally reinforced with knit

Kevlar® and features highly abrasion resistant Pittards Armor-Tan

leather at critical areas. Exclusively for KTM by Alpinestars.


pURE ADVEnTURE GLOVES

Waterproof touring gloves. Leather main

construction with doubled leather on

palm, index finger and thumb. The PU

membrane keeps out the wet and cold.


Aq RACER GLOVES

Waterproof racing gloves that are able to withstand

any tour. Leather construction, doubled in critical

areas. HIPORA® membrane. Carbon knuckle

cover. Hard plastic skid plate on the palm. TPR

on the edge of the hand. Large TPR wrist closure.

Silicone-printed KTM logos on the middle finger

and index finger give a secure hold on the controls.


VECTOR GLOVES

Sport glove made of Pittards leather and

goatskin featuring a carbon knuckle cover.

TPU air vents on the fingers. TPR skid

plate on the ball of the hand. TPR on the

edge of the hand. Double wrist closure.



690.08.110.000 / 49

CARBOn FROnT FEnDER

690.08.050.000 / 49

CARBOn LEFT SiDE FROnT FAiRinG

690.08.051.000 / 49

CARBOn RiGhT SiDE FROnT FAiRinG

690.30.060.000 / 49


690.08.901.000 / 49

CARBOn LEFT FROnT FAiRinG COMpLETE

690.08.908.000

TinTED winDShiELD

Special tinting improves the

appearance of the bike particularly

when using our carbon fairing.

690.08.902.000 / 49

CARBOn RiGhT FROnT FAiRinG COMpLETE

CARBOn pARTS

The finest carbon for a very elegant appearance and maximum weight

reduction. Very impressive and detailed, proven by Akrapovics' many

years of experience with carbon. The average weight reduction for

each part is between 30% and 55%. Matte finish.

RC8» 15

RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC8RC813

690.08.110.000 / 49

690.05.283.100

08 – 10

TiTAniUM SiLEnCER

690.05.907.000

08 – 10

TiTAniUM hEADER

In short: "Akrapovic at it's best", from a technical standpoint and also appear-

ance. This superstock exhaust was specially developed for the RC8. Thanks to

the experienced Akrapovic racing division which was included in the R&D, the

exhaust delivers increased drivability. For usage on race tracks that allow less

noise than FIM sound limits, the exhaust system will be delivered with remov-

able muffler inserts. We recommend for race track use the outer clutch hub

69132001044! The exhaust system can be mounted only in combination with

the 690.05.907.100 headers.

691.05.999.000

RC8 R 09 –10

693.05.999.000

RC8 R 11

CLUB RACE KiT

The Club Race Kit is the perfect choice for ambitious visitors to race track training sessions,

but also for RC8R competitors in a range of amateur racing series. The use of a specially

developed, high-quality Akrapovic EVO4 sports exhaust system together with an amended

cylinder head gasket, specially tuned valve timing as well as the use of an altered fuel

injection mapping all result in a significant increase in performance. Because this adaptation

involves only a few changes and the construction of the engine is very well thought out, any

official KTM RC8 dealer is able to make the Club Kit adaptations in just a few hours.

Includes the Akrapovic EVO 4 exhaust system.

691.05.907.000

TiTAniUM hEADER EVO 4

RC8 R

Specifically designed to be matched with the RC8-R Club Race kit, Superbike and Superstock

engine kit. Should not be used without one of this 3 Tuning Kits and special Mapping.

691.05.283.100

TiTAniUM SiLEnCER EVO 4690.29.096.140 RC8 R 11

USER SETTinG TOOL

This Fuel Injection management tool works with your laptop to

fine tune fuel injection settings, build track specific maps, and

log riding data. Software can be downloaded from www.KTM.com

and includes 2D and 3D modeling. For closed course use only.

– Fine tune fuel injection mapping– perfect for trackside adjustments

USER SETTING TOOL

RC8» 21

691.05.907.100


691.05.383.000 (OnLY FOR RACinG)


In combination with a modified appearance,

this titanium exhaust system is an

enhancement for all RC8 riders who would

like to have great sound, light weight and an

improved power output. The exhaust system

can be mounted only in combination with

69105907100 headers. For proper mounting

the lower fairing must be modified.

RC8» 19



VEnTED JACKET

Breathable summer jacket. Upper material comprised

of tear-resistant and abrasion-resistant polyester/

polyamide blended fabric. Excellent venting thanks to large

ventilation zones in front and back. Comfort collar, SaS-

Tec 3D protectors on shoulders and elbows. Waistband

adjustment. Reflective areas. Small connecting zipper.


pURE ADVEnTURE JACKET

Wind and waterproof, breathable touring jacket made

from polyamide. SaS-Tec protectors on the shoulders

and elbows. Viscoelastic foam in back protector pocket,

SaS-Tec back protector available as an option. Adjustable

comfort collar. Waist adjustment. Wind and waterproof

front closure. Ventilation zips at the front, back and on

the sleeves. Long and short connecting zipper and seat

web. Removable thermal lining. Removable Z liner.

(S/30) 3pw111222(M/32) 3pw111223(L/34) 3pw111224 (XL/36) 3pw111225(XXL/38) 3pw111226(XXXL/40) 3pw111227

VEnTED pAnTS

Breathable summer pants. Upper material comprised of

tear-resistant and abrasion-resistant polyester/polyamide

blended fabric. Excellent venting thanks to large ventilation

zones in front and back. Textile stretch zone on back below

the waistband and on the front above the knee. SaS-Tec

3D protectors on the knee. Viscoelastic foam on the hip.

Waistband adjustment. Doubled material on knee and seat

panel. Calf width adjustment. Small connecting zipper.

(S/30) 3pw111232(M/32) 3pw111233(L/34) 3pw111234(XL/36) 3pw111235 (XXL/38) 3pw111236(XXXL/40) 3pw111237

pURE ADVEnTURE pAnTS

Wind and waterproof, breathable touring pants made from

polyamide with reinforcements on areas where you are likely

to fall. SaS-Tec protectors on the knees. Stretch zones

above the knee, in the hollow of the knee and on the back.

High-cut back. Comfort stretch waistband, rapid waistband

adjustment, calf width adjustment. Wind and waterproof

front closure. Ventilation zip. Long and short connecting

zipper. Removable thermal lining. Removable Z liner.

(S/48) 3pw111012(M/50) 3pw111013 (L/52) 3pw111014(XL/54) 3pw111015 (XXL/56) 3pw111016(XXXL/58) 3pw111017

KTM TECh 1R SUiT









(S/48) 3(M/50) 3(L/52) 3pw(XL/54) 3(XXL/56) 3(XXXL/58) 3

KTM TEC







knee/shin protectors. Exclusively for KTM by Alpinestars.streetstreetstreetstreetstreetstreetstreetequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipmentequipment

5

611.09.099.000 611.09.099.000 / 20

RiM STiCKER SET


and rear rim.

626.09.099.000



620.10.965.118






611.10.051.037 / 04 Z37 611.10.051.038 / 04 Z38 611.10.051.040 / 04 Z40611.10.051.041 / 04 Z41

SpROCKET

If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly

then we have the perfect sprocket for you! A steel outer chain ring combined with an inner

aluminum carrier combines the best of both worlds to create a light weight, long lasting

sprocket. This not only increases rear sprocket life but also the front sprocket and chain life

for up to 3 times compared to normal sprockets. If you are looking for the highest quality


780.13.920.000

BRAKE BLEEDER SCREw

Brake system bleeding made simple.

By installing this new bleeder screw with special

holding valve, you simply open the screw of the

return-valve a half turn and pump the brake fluid

through the brake system. The special holding

valve prevents air getting sucked back into the

system. The result: you don't need to have a

second person to pump or open and close the

bleeder screw. Changing the brake fluid or bleeding

the system is done in seconds. Comes with

anodized mud cap. For the front brake caliper.

620.14.949.000

ADApTiVE BRAKELiGhT



light, alerting traffic behind you.

RC8» 35

750.38.041.100

OiL FiLTER CAp

CNC machined design made of high-

strength aluminum, orange anodized.

690.08.926.050

qUiCK LOCK COVER

690.13.950.044




690.13.950.045

BRAKE LEVER ADJUSTER whEEL

For use with 690.13.950.044

690.34.931.044




690.03.937.144


The CNC machined foot pegs are made of high-strength

aluminum. They are adjustable in 9-positions. That makes

it easy to find the perfect position on the bike. Heel

guard is not included. We recommend the carbon heel

guards 6900396605049 and 6900396505049.

690.08.915.033

nUMBERpLATE hOLDER KiT

Shorter version for a cleaner look.

Includes LED blinkers.

772.30.002.060 / 04


690.07.909.000

TAnK CAp STiCKER

690.07.011.000

TAnK pAD

RC8» 29

690.09.001.044

FROnT 3,5" x 17"

690.10.001.044

REAR 6" x 17"


Forged Rims, directly descended from racing.

Due to a special developed multi-directional

forging process, and detailed force vector

analysis, these wheels offer a maximum weight

reduction and very high rigidity values, for

ideal transfer of brake and acceleration forces.

Weight of wheel set app. 8.6 kg.

690.10.060.100

wAVE-TYpE BRAKE DiSC REAR

Optimized in visual appearance and function. This floating

wave disc features clear feedback without any loss of

brake performance even under heavy conditions.

611.09.960.000

wAVE-TYpE BRAKE DiSC 320 MM









RC8» 33

690.03.945.000

CRASh BOBBinS FROnT


612.30.026.100

CLUTCh COVER



610.13.009.100




610.02.055.060




690.13.962.000

CnC REAR BRAKE CYLinDER COVER



610.03.046.200

CRASh BOBBinS REAR

Will protect your swingarm in the event

of a crash.

690.04.030.090

SwinGARM STiCKER SET

Avoids scratches to the swingarms!

691.32.900.000

AnTi-hOppinG CLUTCh RC8 R


rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration.

This allows for better traction, wheel stability, and higher corner entry speeds. It also

puts less fatigue on the drive train. This clutch is developed for race track use.

690.32.900.000

AnTi-hOppinG CLUTCh RC8

Same as 691.32.900.000 with softer

clutch springs.

RC8» 31

990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 990 super dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper dukesuper duke

39611.05.099.300

690.12.078.000

REAR BAG

The useful rear bag follows in form and layout the rear of the RC8. A specific feature

is that you don't need any carrier system for mounting. Advantage: No tricky mounting

of brackets which destroys the nice design of the RC8 rear.You only have to click in the

bag instead of the rear seat. Small items like cell phone, wallets, keys, etc. are kept

perfectly. When the rear bag is mounted the bike can be used only as a single seater.

Capacity app. 10 Liters.

690.12.019.000

TAnK BAG

This specially developed tank bag fits perfect to the chiseled image of

the RC8. To keep this form at high-speed, we construct the bag using hi

tech materials and techniques. The novel combination of inherently stable

foam and textile fibers results in a rigid form with a soft appearance. The

included map holder is mounted in seconds. Includes rain cover.

690.12.007.000


No chance for dust or unwanted scratches etc to damage your

bike, thanks to the KTM indoor bike cover which makes your RC8

an eye-catcher in the garage as well. The cover is made from a

special fabric with a distinctive structure that does not allow dust

or condensation to pass through. The inner-side has a soft lining.

610.12.032.000 RC8 08 – 10RC8 R 09 – 11

RADiAL ROADLOK ®

The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-

theft locking security due to the system's permanently-mounted lock body--which literally becomes a part

of the vehicle's frame. The frame-mounted solution eliminates movement completely while the system is

engaged--the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider

forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin,

which keeps the bike locked right where the rider parks the vehicle, guarantees that the system will never

accidentally lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 61109960000.

601.12.035.000

ALARM SYSTEM

Plug and Play fail safe single circuit immobilization. Water and vibration resistant

resin bonded construction. Integral movement sensor. Storage box is also secured.

2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium

transmitter battery (3 year life). 69012035044 necessary for mounting.

690.12.035.044


601.12.178.000

ZippER LOCK


luggage! For use on 69012078000

and 69012019000.

RC8» 37

690.07.908.000

RACinG FUEL CAp


691.30.986.044 RC8 08 – 10RC8 R 09 – 11


691.30.985.044 RC8 08 – 10RC8 R 09 – 10

693.30.985.044 RC8 R 11

CARBOn EnGinE pROTECTOR LEFT

A must for FIM compliance in superstock racing, also protects your

engine on the street in case of a fall.

690.34.080.000

qUiCKShiFTER

The perfect solution for quick up shifting without using the clutch! An electronic sensor, recognizes

when you push the shift lever. Then, it interrupts the ignition for a fraction of a second, which allows

a drag free up-shifting without using the clutch and without closing the throttle. Is also useable

with our reverse gear change kit 690.34.931.066. Needs mounting kit 690.34.081.044.

U690.9852

TiRE wARMERS










RC8» 27

690.10.951.134 Z34690.10.951.135 Z35690.10.951.137 Z37690.10.951.138 Z38690.10.951.139 Z39690.10.951.140 Z40690.10.951.141 Z41690.10.951.142 Z42

REAR SpROCKET 520

Made of high-strength aluminum.


690.33.929.015 Z15 690.33.929.016 Z16 690.33.929.017 Z17

FROnT SpROCKET 520


600.05.022.244

SLS REMOVAL KiT

Mounting only possible on Akrapovic exhaust

system 69005283000 or 69005283100

and use of special Akrapovic Mapping!

690.05.014.000

FROnT BRACKET EXhAUST hOLDER

Additional weight reduction due to

removed horn, and horn-holder.

690.10.965.120

ChAin 520

High strength and high efficiency chain,

reduces drag. That means increased

performance of the bike!

690.03.901.023

STEERinG STOppER

Protects the steering damper from damage due to

extreme handlebar movement. Fits all RC8 models

from VIN VBKVR94068M947878.

690.11.046.044


For quick sidestand removal. Leave

the support on the bike and plug in the

adapter for the sidestand sensor.

690.11.046.144


Completely remove the side stand and

stock support, and mount the lightweight

shifting shaft support. Weight reduction

plus a real race appearance.

690.34.931.066


690.13.930.000

FROnT BRAKE pADS

Brake performance on a real FIM Superbike

level. These pads provide consistent feel for

use on high speed tracks with higher braking

demands. Works perfect with stock brake-

discs and also with the wave-style discs

61109960000. For race use only!

691.08.908.000

RACinG winDShiELD

Clear windshield with special shape, directly

derived from IDM factory racing team!

690.06.915.100

AiR FiLTER RACinG

Racing air filter with a higher air flow rate for

better performance. Cleanable and reusable

for extended service life.

RC8» 25FiBERGLASS pARTS

An absolute "must have" for every ambitious racer! The fiberglass fairing

meets with the FIM requirements for Superstock. What this means to you;

Paint the fairing as you like, attach it with the quarter turn pins and hit the

track. Fiberglass fairing needs mounting kit for control box and voltage regulator

69012034044. For proper mounting you also need to order 14 pieces quick closure

69008901050 and 14 pieces receivers 45007040050.

690.08.901.150

qUiCK CLOSURE

450.07.040.050

COUnTERpART qUiCK CLOSURE

690.08.101.000

FiBERGLASS FROnT FAiRinG

690.08.110.000

FiBERGLASS FROnT FEnDER

690.08.103.000

FiBERGLASS RiGhT SiDE FAiRinG

690.08.102.000

FiBERGLASS LEFT SiDE FAiRinG

690.08.160.100

FiBERGLASS UnDER EnGinE FAiRinG

690.08.114.000

FiBERGLASS REAR FAiRinG

690.08.147.000

FiBERGLASS SEAT FAiRinG

690.08.947.000

FiBERGLASS SEAT FAiRinG wiTh qUiCK CLOSURE

690.12.034.044

RACinG MOUnTinG KiT FOR COnTROL BOX AnD VOLTAGE REGULATOR

690.08.147.150

SEAT COnTACT SURFACE

This self-adhesive seat contact surface gives you the perfect

contact to your bike. For use with fiberglass seat fairings

69008147000 or 69008947000.

RC8» 23

159

76 98

1312 15141110

1918 21201716

54 2524 2726

3130 33322928

3736 39383534

2322

OVERViEw»

611.09.960.000

07–10










611.09.099.000 611.09.099.000 / 20

RiM STiCKER SET

Ready cut sticker for adding on front and

rear rim.

620.10.965.118





excusive appeal coming from its black

hard coated plates with brassed pins

and rollers. 118 length.

626.09.099.000



611.10.051.037 / 04 Z37 611.10.051.038 / 04 Z38 611.10.051.040 / 04 Z40611.10.051.041 / 04 Z41

SpROCKET

If you think a steel sprocket is too heavy and an aluminum sprocket

wears out too quickly then we have the perfect sprocket for you!

A steel outer chain ring combined with an inner aluminum carrier

combines the best of both worlds to create a light weight long lasting

sprocket. This not only increases rear sprocket life but also the

front sprocket and chain life for up to 3 times compared to normal

sprockets. If you are looking for the highest quality sprocket available

and one that matches the image of your KTM your search is over!

770.13.920.000 07–10

BRAKE BLEEDER SCREw

Brake system bleeding made simple. By installing this new bleeder screw with special holding

valve, you simply open the screw of the return-valve a half turn and pump the brake fluid through

the brake system. The special holding valve prevents air getting sucked back into the system.

The result: you don't need to have a second person to pump or open and close the bleeder screw.

Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap.

77013920000 for rear brake caliper 07-10. 77013920100 for front brake caliper 07-10.

770.13.920.100 07–10


– Fast bleeding– Easy handling– premium materials

Brake Bleeder screw

53990 SUpER DUKE»

600.30.126.200 07–10

CnC CLUTCh COVER



503.13.005.000 07–10

CLAMp BRAKE CYLinDER


610.02.044.100 07–10

CLAMp CLUTCh CYLinDER


772.30.002.060 / 04

07–10


610.11.046.044 07–10

SiDE STAnD DiSASSEMBLY KiT

For quick sidestand removal. Leave the

support on the bike and plug in the adapter

for the sidestand sensor.

620.12.940.050 07–10

REAR ViEw MiRROR EXTEnSiOn

If you want to improve your rear view, this is the

solution for you. Mounts betweens the stock

mirrors and adapters.

990 SUpER DUKE» 47

611.07.908.000 07–10

RACinG FUEL CAp


690.13.950.044 07–10




690.34.931.044 07–10




U691.0017 07–10

ThROTTLE CAM SYSTEM





611.32.000.100 07–10

AnTi-hOppinG CLUTCh



higher corner entry speeds. It also puts less fatigue on the drive train. This clutch is developed for race track use.

611.12.005.144 07 – 10

MOUnTinG KiT FOR STEERinG DAMpER

1618.0D03 07–10

STEERinG DAMpER

From model year 07 you need mounting kit 611.12.005.144 .

611.01.134.029 / 30

07 – 10

CnC TOp TRipLE CLAMp

For mounting of the handlebar you also need the handle-

bar support 6110103904430. Using the top triple clamp

61101134029/30 needs 2 pcs. bushing 61101035000 and

2 pcs. screw 61111064000 for mounting the starter lock.

611.03.038.044 07–10


These CNC machined foot pegs are made of high-

strength aluminum. They feature replaceable components

and allow for 6 position adjustments.

610.34.030.100 07–10




51990 SUpER DUKE»

610.04.037.050 07–10


610.02.055.060 07–10




610.13.009.100 07–10




610.03.045.200 07–10

CRASh BOBBinS FROnT


610.03.046.200 07–10

CRASh BOBBinS REAR

Will protect your swingarm in the event of a crash.

613.03.946.044 07–10

CRAShpAD FOOTpEG


the passenger footpeg.

49990 SUpER DUKE»

611.12.035.044 07–10


600.12.035.100 07–10

ALARM SYSTEM








610.12.019.000 07 – 10

TAnK BAG

Made with extra tough zippers and abrasion-

resistant edging of reflex material. Adjustable size

main compartment, two smaller compartments,

map sleeve. Total capacity: 15 litres. Carrying

handle, shoulder strap and rain cover included.

601.12.178.000

ZippER LOCK



610.12.019.000.

620.02.903.050

07–10

GpS / pDA BAG SMALL

Great travel bag to help keep electronics dry and shock


620.02.903.150

07–10

GpS / pDA BAG BiG


620.02.903.000

05 – 11



610.12.032.000 07 – 10

RADiAL ROADLOK ®










57990 SUpER DUKE»

690.09.001.044 07–10FROnT 3,5" x 17"

611.10.801.044 07–10REAR 5,5" x 17"

MARChESini ALUMinUM whEELS




and acceleration forces. Weight of wheel set app. 8.6 kg.

610.07.011.100 07–10

TAnKpAD

611.07.909.000 07–10

TAnK CAp STiCKER

U690.9852

TiRE wARMERS










55990 SUpER DUKE»

610.05.099.000 07–10


Your motor’s potential will be awakened; the designs for this system come from the

same department that designs the racing versions of Akrapovic exhaust systems. In

addition, due to the use of high-tech materials, you will save weight and improve the

overall characteristics of your bike. 55% weight reduction . Removable noise reduction

insert. Special mapping from a KTM Street dealer is required for proper performance.

For closed course use only.

610.05.099.200 07 – 10


The Akrapovic carbon tipped SLIP-ON system is a starting-level tuning

component. It is an excellent combination of price, performance, top-quality

materials and production quality. Mounting only possible with original headers.

Approx. 9 kg less weight and more performance. Special mapping from a

KTM dealer is required for proper performance. For closed course use only.

610.05.007.200

07 – 10

EVOLUTiOn TiTAniUM hEADERS

610.05.007.300

07 – 10

RACinG STAinLESS STEEL hEADERS

610.05.099.300

07 – 10


The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze

that little bit more out of their Super Duke. The complete system delivers an improved torque curve

to the back wheel and saves a lot of weight, improving handling not to mention the sharp appearance.

The design of the muffler for the Akrapovic Racing and Evolution systems fits exceptionally well to the

aggressive naked bike look. Not useable for 990 Superduke R 08-09. For closed course use only.

990 SUpER DUKE» 45

610.08.019.000 / 49

07–10

CARBOn COVER FOR REAR pART

Finest carbon for a very elegant appearance and a

weight reduction. Not useable for R-Versions.

610.07.040.020 / 49 07–10

CARBOn SEAT COVER


610.05.099.007

FOR 610.05.099.000

CARBOn hEAT pROTECTOR

610.03.095.000 / 49 07–10

CARBOn FOOTREST pROTECTiOn SET

600.06.003.002/ 49 07–10

CARBOn AiRBOX COVER LEFT

610.06.003.002/ 49 07–10

CARBOn AiRBOX COVER RiGhT

600.30.060.000 / 49

07–10



990 SUpER DUKE» 43

600.30.085.000 07 – 10



from Carbon Kevlar.

600.30.086.000 07 – 10



from Carbon Kevlar.

610.08.014.000 / 49 07 – 10


Finest carbon for a very elegant appearance

and a weight reduction.

611.08.110.000 / 49 07 – 10

CARBOn FROnT FEnDER


990 SUpER DUKE» 41

620.10.965.118






611.10.051.038 / 04 Z38 611.10.051.040 / 04 Z40611.10.051.041 / 04 Z41

SpROCKET



worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front

sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality


620.12.940.050 950 SM 06–07990 SMT 10–11990 SMR 10–11

MiRROR EXTEnSiOn

If you want to improve your rear view, this is the solution for you.

Mounts betweens the stock mirrors and adapters.

620.04.912.000

990 SM T 10 – 11990 SM R 10 – 11

pRELOAD ADJUSTER REAR ShOCKThis shock preload adjuster allows for quick adjustment with just a T-handle wrench. Unlike other preload

adjusters this one has a mechanical drive mechnism that allows the use of the entire thread range. Great for

adjusting the shock for luggage or two up riding.

– Easy adjustability– improved appearance

Preload adjuster rear shock

71

611.10.051.038 /04 Z38611.10.051.040 /04 Z40611.10.051.041 /04 Z41




625.05.099.000 950 SM 06– 07990 SMR 10–11


59% lighter, slip-on silencer increases performance compared

to the stock silencers. Muffler inserts can be removed for sports

riding. Special mapping from an authorized KTM Street dealer


600.05.099.300 950 SM 06– 07990 SMR 10–11


These stainless steel slip-on silencers offer a great price

performance ratio. The use of high quality INOX stainless

steel means that these silencers are built to last. Total

weight of both silencers together is 9.8 lbs. Over 50% lighter

than the stock silencers. They also feature removable spark

arrestor inserts. For closed course use only. 626.05.099.200

950 SM 06–07990 SMR 10–11


The Akrapovic SLIP-ON system is a starting-level tuning component . It is an

excellent combination of price, performance, top-quality materials and production

quality. Mounting only possible with original headers. Approx. 9 kg less weight

and more performance. Special mapping from an authorized KTM Street dealer


620.05.099.000 990 SMT 10–11


59% lighter, slip-on silencer set increases performance

compared to the production exhaust. Optional muffler

inserts can be removed for sports riding. Special mapping

from an authorized KTM Street dealer required for

proper performance. For closed course use only.


780.13.920.000

990 SM990 SMR R 10–11

BRAKE BLEEDER SCREBRAKE BLEEDER SCREw

770.13.920.100 950 SM 06–07990 SMTT 10–11

BAnJO BOLT JO BOLT wiTh BLEEDER FUnCTiOn

Brake system bleeding made simple. By installing this new bleeder screw Brake system bleeding made simple. By installing this new bleeder screw Brake system bleeding made simple. By installing this new bleeder screw

with special holding valve, you simply open the screw of the return-valve a with special holding valve, you simply open the screw of the return-valve a with special holding valve, you simply open the screw of the return-valve a

half turn and pump the brake fluid through the brake system. The special half turn and pump the brake fluid through the brake system. The special half turn and pump the brake fluid through the brake system. The special

holding valve prevents air getting sucked back into the system. The result: holding valve prevents air getting sucked back into the system. The result:

you don't need to have a second person to pump or open and close the you don't need to have a second person to pump or open and close the

bleeder screw. Changing the brake fluid or bleeding the system is done in bleeder screw. Changing the brake fluid or bleeding the system is done in

seconds. Comes with anodized mud cap. 77013920100 for front brake seconds. Comes with anodized mud cap. 77013920100 for front brake

caliper 05-10. 78013920000 for front brake caliper 990 SM-R 09-11.caliper 05-10. 78013920000 for front brake caliper 990 SM-R 09-11.

610.04.037.050 950 SM 06–07990 SMT 10–11990 SMR 10–11


610.13.009.100 950 SM 06–07990 SMT 10–11990 SMR 10–11

CnC BRAKE-FLUiD RESERVOiR COVER



SXS.05.450.220 990 SM T 10–11 990 SM R 10–11

SXS.05.450.230 950 SM 06 – 07




600.30.126.200 950 SM 06–07990 SMT 10–11990 SMR 10–11

CnC CLUTCh COVER

High-quality, CNC-machined outer clutch cover

with factory look. Made of high-strength aluminum.

600.13.059.200 950 SM 06–07990 SMT 10–11990 SMR 10–11

CnC MAin BRAKE CYLinDER COVER


U691.0017 950 SM 06–07990 SMT 10–11990 SMR 10–11

ThROTTLE CAM SYSTEM

Precision machined aluminum throttle tube with delrin inserts for smooth throttle action.

Includes three updated cam profiles designed to give different throttle response with fuel

injected bikes.

611.32.000.100 950 SM 06–07990 SMT 10–11990 SMR 10–11

AnTi-hOppinG CLUTCG CLUTCh

This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid

rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration. This

allows for better traction, wheel stability, and higher corner entry speeds. It also puts less allows for better traction, wheel stability, and higher corner entry speeds. It also puts less

fatigue on the drive train. This clutch is developed for race track use.

772.30.002.060 / 04 950 SM 06–07990 SMT 10–11990 SMR 10–11



The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze that little bit more out of The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze that little bit more out of

their Supermoto. The complete system delivers an improved torque curve to the back wheel and saves a lot of weight, improving their Supermoto. The complete system delivers an improved torque curve to the back wheel and saves a lot of weight, improving

handling not to mention the sharp appearance. The design of the muffler for the Akrapovic Racing and Evolution systems fits handling not to mention the sharp appearance. The design of the muffler for the Akrapovic Racing and Evolution systems fits

exceptionally well to the aggressive supermoto look. The exhaust is configured as a 2-1-2 system, with two conical header tubes exceptionally well to the aggressive supermoto look. The exhaust is configured as a 2-1-2 system, with two conical header tubes

leading into a Y collector, then into a cylindrical Y link pipe and finally onto the two mufflers. The difference between the Racing

and the Evolution mufflers is in the materials used. The Racing system uses high quality stainless steel, while the Evolution

uses a special type of titanium The performance characteristics of the two systems are identical. The individual components are

connected with sleeve joints secured with silicon-shielded springs. For the KTM Supermoto we fitted the new design Akrapovic

mufflers, which are attached to the frame using Akrapovic carbon-fiber clamps. The muffler outer sleeves are titanium, as are the

perforated inner tube, inlet cap and outlet tube. The outlet tube is formed using the hydroforming process accurate to the last

millimeter. The outlet cap for the Supermoto is made of carbon. The result is impressive 9 kg less weight and significantly more

performance. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

625.05.099.300 950 SM 06 – 07 990 SM R 10 – 11


626.05.007.100

950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11


626.05.007.200

950 SM 06 – 07990 SM T 10 – 11 990 SM R 10 – 11

RACinG STAinLESS STEEL hEADER

620.05.099.200

990 SMT 10 – 11



620.14.949.000 950 SM 06–07990 SMT 10–11990 SMR 10–11

ADApTiVE BRAKELiGhT


of hard braking, the control unit pulses the rear

brake light alerting traffic behind you.

610.03.045.200 950 SM 06–07990 SMT 10–11990 SMR 10–11

CRASh BOBBinS FROnT

Protects your forks in the event of a crash.

610.03.046.200 950 SM 06–07990 SMT 10–11990 SMR 10–11

CRASh BOBBinS REAR

Protects your swingarm in the event of a crash.

625.12.035.044 950 SM 06 – 07


626.12.035.044 990 SMT 10–11990 SMR 10–11


600.12.035.100 950 SM 06 – 07

ALARM SYSTEM

Plug and Play Failsafe twin circuit immobilization. Water and vibration

resistant resin bonded construction. Integrated microchip movement

sensor. Seat is secured with Reed switch. 2 x waterproof anti-scan,

anti-grab rolling code remote transmitters. Lithium transmitter battery

(3 year life-span). 625.12.035.044 necessary for mounting.

601.12.035.000 990 SMT 10–11990 SMR 10–11

ALARM SYSTEM

Plug and Play Fail safe twin circuit immobilization. Water and vibration

resistant resin bonded construction. Integral movement sensor.

Storage box is also secured. 2 x waterproof anti-scan, anti-grab

rolling code remote transmitters. Lithium transmitter battery

(3 year life), 62612035044 necessary for mounting.

613.03.946.044 950 SM 06–07990 SMT 10–11990 SMR 10–11

CRAShpAD FOOTpEG

Crashpads for mounting on the passenger footpegs.

610.12.032.000 990 SM T990 SM R

RADiAL ROADLOK ®

The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-theft

locking security due to the system's permanently-mounted lock body--which literally becomes a part of the

vehicle's frame. The frame-mounted solution eliminates movement completely while the system is engaged-

-the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider forgets to

remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps

the bike locked right where the rider parks the vehicle, guarantees that the system will never accidentally

lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.


611.09.099.000611.09.099.000 / 20

RiM STiCKER SET

Ready cut sticker for adding on front Ready cut sticker for adding on front

and rear rim.

626.09.099.000



690.09.001.044 05–11FROnT 3,5" x 17"

611.10.801.044 05–11REAR 5,5" x 17"





and acceleration forces. Weight of wheel set app. 8.6kg.

630.03.094.044 / 30630.03.094.044 / 04

950 SM 06–07990 SMT 10–11990 SMR 10–11



586.08.001.000 / 49 950 SM 06–07

CARBOn hEADLiGhT MASK



611.08.110.000 / 49 990 SM T 10 – 11

CARBOn FROnT FET FEnDER

50% weight reduction.% weight reduction.

625.01.094.000 / 49 950 SM 06–07990 SMR 10–11

CARBOn SpLASh pROTECTiOn



625.08.050.000 / 49 LEFT950 SM 06 – 07

625.08.051.000 / 49 RiGhT950 SM 06 – 07

CARBOn SpOiLER

Finest carbon for an elegant appearance and

reduced weight. Not for use on R models.

610.08.014.000 / 49 950 SM 06–07990 SMT 10–11990 SMR 10–11

CARBOn ChAinGUARD AnnD hUGGER

Finest carbon for an elegant appearance Finest carbon for an elegant appearance

and reduced weight.

600.30.086.000 950 SM 06–07990 SMT 10–11990 SMR 10–11



Carbon Kevlar.

600.30.085.000 950 SM 06–07990 SMT 10–11990 SMR 10–11



Carbon Kevlar.

600.30.060.000 / 49 950 SM 06–07990 SMT 10–11990 SMR 10–11



63950 / 990 SUpERMOTO»61611.32.000.100

611.12.035.044 07–10


600.12.035.100 07–10

ALARM SYSTEM








610.12.019.000 07 – 10

TAnK BAG

Made with extra tough zippers and abrasion-Made with extra tough zippers and abrasion-

resistant edging of reflex material. Adjustable size resistant edging of reflex material. Adjustable size

main compartment, two smaller compartments, main compartment, two smaller compartments,

map sleeve. Total capacity: 15 litres. Carrying map sleeve. Total capacity: 15 litres. Carrying

handle, shoulder strap and rain cover included.handle, shoulder strap and rain cover included.

601.12.178.000

ZippER LOCK



610.12.019.000.

620.02.903.050

07–10

GpS / p/ p/ DA BAG SMALL

Great travel bag to help keep electronics dry and shock Great travel bag to help keep electronics dry and shock


620.02.903.150

07–10

GpS / p/ p/ DA BAG BDA BAG BiG

Dimensions: 170 x 130 x 35 mm.Dimensions: 170 x 130 x 35 mm.

620.02.903.000

05–11

SUppORT FOR GpS / p/ p/ DA BAGS


610.12.032.000 07 – 10

RADiAL ROADLOK ®










57990 SUpER DUKE»

161

4342 4544

4948 51504746

5554 57565352

4140 6160 6362

6766 69686564

7372 75747170

5958

OVERViEw»

89601.12.025.200

950950950950950950950950950950950950950950950950///990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure990 adventure

600.12.025.100 / 30

ADVEnTURE CASE SET

Two, absolutely water-proof, practically indestructible top-loading side bags

(left and right), with 2 integrated 3-liter water containers. Fits the Adventure

luggage rack system (not included). Double-wall plastic construction

throughout, with robust metal locks on the tops and sides. Capacity:

approx. 2x32 liters; 48x27x36 cm. Inside pocket : 600.12.025.060

601.12.920.000

LOCK FOR qUiCKLOCK CARRiER SYSTEMER SYSTEM

Locks your Quicklock carrier system on your bike.Locks your Quicklock carrier system on your bike.

600.12.025.090

FOR 600.12.025.100 /30

LUGGAGE hOOK SET

601.12.178.000

ZippER LOCK

Avoids thieves' quick entry to your luggage! For use

on 62612019000, 62612019100, 60012078000,

60012078100, 62012025100, 62512019200,

60112078000, 62512025000 and 75012019100.

620.11.042.044 990 SM T 10–11

OUTLET KiT

Necessary when a source of power is

needed for a navigation system or for

any other use.

620.12.020.100

990 SM T 10 – 11990 SM R 10 – 11

qUiCKLOCK CARRiER SYSTEM / ADVEnTURE CASE

620.12.020.200

990 SM T 10 – 11990 SM R 10 – 11

qUiCKLOCK CARRiER SYSTEM / BLACK ALU CASE

This kit contains the quicklock carrier system (which stays on the bike) and the adapters for

our KTM Adventure cases. With the adapters removed the carrier system is almost invisible.

Cases not included.

– quick mounting and dismounting– Luggage rack is blended into the stock appearance– Lockable

Quicklock carrier system


626.08.065.000 990 SM R 10 – 11

TOURinG-winDSCREEn

We recommend the touring windscreen

for longer trips.

620.08.965.000 990 SM T 10 – 11

TOURinG winDSCREEn


625.07.040.100 / 30 950 SM 06 – 07

ERGO SEAT

Gel insert increases comfort especially on long trips. Gel insert increases comfort especially on long trips. Gel insert increases comfort especially on long trips.


620.07.040.100 990 SMT 10–11990 SMR 10–11

ERGO SEAT

602.12.092.060 990 SMT 10–11

UniVERSAL pLUG

Necessary for the modification of the power supply

cable of the navigation system to be able to fit with

the socket 620.11.042.044.

626.08.050.000 / 20A 990 SM T 10 – 11

SpOiLER whiTE LEFT

626.08.051.000 / 20A 990 SM T 10 – 11

SpOiLER whiTE RiGhT

Note: The white of the PowerParts spoiler is not

identical to the white of the 2011 white SMidentical to the white of the 2011 white SMT!T!


601.12.024.200


601.12.025.200


These new style travel cases are made of two ultra strong

materials. The sidewalls are made of high strength

aluminum and the corners are made of impact-resistant

plastic parts. The components are vary durable and water-

proof bonded by a specially developed riveting technology!

Volume of each case is app. 37 L. To secure your luggage

an additional lock kit 60112023050 (includes 4 locks for

both cases) is available. To secure side cases and top case,

please order the lock kit 60112023150 (includes 6 locks).

Optional inside pockets available: 60112024070.

601.12.024.060


Adding this belts to your side cases, you can easily Adding this belts to your side cases, you can easily Adding this belts to your side cases, you can easily

take them with you in the hotel room or your tent.take them with you in the hotel room or your tent.take them with you in the hotel room or your tent.

601.12.027.000


38L volume. Optional inide pockets

available: 601.12.027.070


601.05.099.000 03 – 11


Save weight, add more torque and a pleasant exhaust note to your

Adventure with this carbon tipped slip-on silencer set. Includes

removable sound reduction inserts. For off-road use only.

600.05.099.000 03 – 11


59% lighter slip-on silencer that will also add power when

compared to the series production exhaust. Includes removable

sound reduction inserts. For off-road use only.

600.05.099.300

03 – 11


These stainless steel slip-on silencers offer a great price performance ratio. The

use of high quality INOX stainless steel means that these silencers are built to last.

Total weight of both silencers together is 9.8 lbs. Over 50% lighter than the stock

silencers. They also feature removable spark arrestor inserts. For off-road use only.


600.07.213.050 03 – 05

CARBOn TAnK pROTECTOR

Super light Carbon /Kevlar protection.

600.30.060.000 / 49 03 – 11



600.30.086.000 03 – 11




600.30.085.000 03 – 11





625.12.025.000

SiDE BAGS

High quality robust saddlebags for long trips; includes

interior rain protector. 62512020000 or 62612020000 is

necessary for correct mounting. Volume appr. 18 Liters.

625.12.019.200 950 SM 06–07990 SMT 09–11

TAnK BAG

Made with extra tough zippers and is fitted with abrasion-resistant material

at the edges. Generous adjustments possible to main compartment; four

smaller compartments, removable map sleeve. Easy mounting system. Total

capacity 18 liters. Handle, shoulder strap and rain cover included.

625.12.020.000 950 SM 06 –07

626.12.020.000 990 SM R 10 – 11

CARRiER SYSTEM

Rigid steel tubular construction . Simple installation without any

modification to the passenger foot pegs; perfect load distribution

on the existing mounting points on the chassis.

620.12.092.044


Universal application possibilities for

mounting the GPS holder.

601.12.078.000

ROLLROLLBAGBAG





equipment dry!

601.12.978.044 950 SM 950 SM 0505–0808990 SM 08–10990 SMT 09–11990 SMR 09–11


Ideal for transporting your luggage bag. Cannot be used

for mounting a Topcase.

626.12.020.050

990 SM R 10 – 11

SiDE BAGS /CARRiER KiT

Use the specially designed SM-T side bags, and the nearly invisible SM-T original

carrier for your 990 SM/SM-R, from MY09 on. Kit includes side bags, carrier system

and all necessary mounting material with mounting manual.

Important notice:

If you use already an Akrapovic Exhaust you need:

- Evolution (62505099300, 62605099300): mounting kit 62005099010

- Slip-on (62605099000, 62605099200): mounting kit 62005099010 and Y-pipe

62005099050

If you plan to buy an Akrapovic Exhaust after you have mounted the Carrier kit,

please order one of the Exhaust system for SM-T.

Carrier Kit can not be combined with the Slip-on 62505099000! Can be used on

bikes with VIN higher than VBKVS94009M960440!

620.02.903.000

SUppORT FOR GpS / p/ p/ DA BAGS


handlebar supports!

620.02.903.050




Dimensions: 140 x 90 x 35mm

620.02.903.150

GpS / p/ p/ DA BAG LARGE



600.12.027.252




625.12.027.150

950 SM 06 – 07

626.12.027.050 990 SMR 10–11

CARRiER pLATE FOR TOpCASE

For Top case 37, 46 and rear bag

600.12.078.000 or 600.12.078.100.

600.12.078.100

REAR BAG

Bag with quick-lock system for easy mounting. The

volume of the bag can be varied between 12 and

18 liters. The following carrier plates are required

for mounting: 950 Supermoto 625.12.027.150;

for 990 Supermoto, 626.12.027.050.

600.12.027.500

TOpCASE 37

This top case with a storage capacity of 37 liters makes use of the practical

press-lock system for simple opening and closing. The following carrier plates

are required for mounting: 950 Supermoto 625.12.027.150; 990 Supermoto

626.12.027.050. No additional carrier plate required for mounting on the

990 SM-T. The top case can be mounted directly on the original installed

parts. Size: 49 x 40 x 31 cm.

750.12.019.100 990 SM T 10 – 11

TAnK BAG

Compact tank bag with enough capacity for longer trips. The new closures guarantee it fits perfectly Compact tank bag with enough capacity for longer trips. The new closures guarantee it fits perfectly




626.12.019.100 990 SM R 10 – 11

TAnK BAG

Made with extra tough zippers and fitted with abrasion-resistant Made with extra tough zippers and fitted with abrasion-resistant

material at the edges. Main compartment plus one smaller

compartment, removable map sleeve. Easy mounting system.

Total capacity 12 liters. Handle and rain cover included.

620.12.025.100 990 SMT 10–11 11

SiDE BAGS

These side bags were specially designed for the 990 SM-T. They not only follow the layout of These side bags were specially designed for the 990 SM-T. They not only follow the layout of

the line and color of the bike, but were also specially designed to fit the original carrier. This is a the line and color of the bike, but were also specially designed to fit the original carrier. This is a

lightweight and very quick mounted luggage solution for the next tour. Includes waterproof inside

pockets. With the optional locking kit 620.12.928.000 you can achieve a theft deterring luggage

system. Appr. volume 2 x 13L.

600.12.027.600

TOpCASE 46

This top case with a storage capacity of 46 liters

easily holds two full-face helmets. It features

the latest generation of snap-shut locking

mechanism. The case boasts an extremely elegant

design with great personality. The following

carrier plates are required for mounting: 950

Supermoto 625.12.027.150; 990 Supermoto

626.12.027.050. No additional carrier plate

required for mounting on the 990 SM-T. The

top case can be mounted directly on the original

installed parts. Size: 58 x 42 x 31 cm.

600.12.027.352




756.12.978.000

UniVERSAL REAR BAGVERSAL REAR BAG / BACK/ BACK/ pACK

This new designed bag can be used as rear bag on the carrier This new designed bag can be used as rear bag on the carrier

plate of the bike, or as a backpack. By using the circular zip, the plate of the bike, or as a backpack. By using the circular zip, the


an additional storage room for small items and rubber straps on the

top to fix a jacket, gloves, etc.


620.03.022.000 990 SMR 10–11990 SMT 10–11

CEnTER STAnD

Lifts your back wheel off the ground for tire changes

and maintenance.

620.12.099.044 990 SMR 10–11990 SMT 10–11

EnGinE pROTECTiOn

This aluminum engine protection not only looks

great, it offers maximum protection against stones

and other flying debris.

620.12.068.000 990 SM 08–10990 SMT 09–11990 SMR 09–11

TAnK pROTECTiOn

Plastic coated tubular steel bars, which securely

attach to the frame.

601.03.923.050 990 SM 08–10990 SMT 09–11990 SMR 09–11

STAnD pLATE BiG

With this larger stand plate, your bike always stands

securely, even on soft ground.

777777950 / 990 SUpERMOTO»

600.12.027.400 / 30

TOpCASE ADVEnTURE

Adventure Top case with an internal volume of 42 liters.Adventure Top case with an internal volume of 42 liters.

For mounting you need also the bracket 600.12.027.450.For mounting you need also the bracket 600.12.027.450.

Backrest 600.12.027.452 and Inside Pocket

600.12.027.453 are optional available.

600.12.025.100 / 30

ADVEnTURE CASE SET

Two absolutely waterproof, practically indestructible top-loader side cases (left and right), with

integrated 3-liter water container (2 x). Suitable for the Adventure luggage rack system (not included).

Double-wall plastic construction all round, with robust metal locks on the top and sides. Volume:

approx. 2 x 32 liters; 48 x 27 x 36 cm – matching inside pocket = 600.12.025.060

600.12.027.450

BRACKET FOR TOpCASE

For top case 600.12.027.400 and 600.12.027.400/30.For top case 600.12.027.400 and 600.12.027.400/30.

600.12.020.100 03 – 11

CASE CARRiER SYSTEM

Rigid steel tubular construction for mounting of all available case sets. Simple

installation, without any modification of the passenger foot pegs, perfect

load distribution on the existing mounting points on the chassis.

601.12.929.050 03 – 11

BRACKET FOR TOpCASE

For top case 601.12.929.000

601.12.929.000


Size approx. 31 x 40 x 30 cm.

601.12.924.000

ALUMinUM CASE 38 L

Durable, water-proof individual bags made of 1.5 mm aluminum without edge welding Durable, water-proof individual bags made of 1.5 mm aluminum without edge welding

seams. Rounded constrution with robust plastic protectors on the corners. Can be used

on right and left sides. Fits the luggage rack system 600.12.020.100 (not included). Two

locking mechanisms with articulation function for the cover, locking eyelets on the top and

mounts for additional locks. Capacity: approx. 38 liters; 44 x 24 x 39 cm – Inside Pocket

= 600.12.025.060.

600.12.025.090

LUGGAGE BRACKET SET SET

FOR 600.12.025.100 AND

600.12.025.100/30

950 / 990 ADVEnTURE» 99

600.08.008.100 03 – 11

TOURinG winDSCREEn

Helps eliminate wind buffeting and Helps eliminate wind buffeting and

protects against fatigue. This taller protects against fatigue. This taller

windscreen is approx. 4 1/2" taller windscreen is approx. 4 1/2" taller

and 4" wider on each side over the and 4" wider on each side over the

stock wind screen.

584.01.043.018 03 – 11

hAnDLEBAR RiSER

18 mm.

600.07.040.100 03 – 11

ERGO SEAT

Approx. 20 mm lower seat with gel insert. The gel

insert increases comfort, especially on long trips.

601.12.064.044 03 – 11

hEATED GRip SET

The heating grips, adjustable to two levels ensure you

have warm hands even when the weather is bad. Grips

have holes for mounting on the hand guards.

582.14.069.044 03 – 08

TRip-MASTER SwiTCh

The switch comes with all necessary add-on parts.

U691.0017 06 – 11

ThROTTLE CAM SYSTEM





620.12.940.050 03 – 11

MiRROR EXTEnSiOn

If you want to improve your rear view, this is the solution

for you. Mounts betweens the stock mirrors and adapters.

613.03.946.044 03 – 11

CRAShpAD FOOTpEG


the passenger footpegs.

950 / 990 ADVEnTURE» 97

601.12.035.000 07 – 11

ALARM SYSTEM


construction. Integral movement sensor. Storage box is also secured. 2 x waterproof anti-

scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life),

60112035144 necessary for mounting.

601.12.035.144 07 – 11


600.12.068.100 03 – 11

CRASh BARS

Plastic-coated tubular steel bars, which securely attach to the frame.

600.12.072.000 03 – 11

TRAnSpAREnT TAnK pROTECTiVE STiCKER SET

Help save the paint from scuffs when riding

off road.

620.14.949.000 03 – 11

ADApTiVE BRAKELiGhT


of hard braking, the control unit pulses the

rear brake light alerting traffic behind you.

601.03.923.050 03 – 11

STAnD pLATE BiG

With this bigger stand plate, your bike always With this bigger stand plate, your bike always

stands securely, even on soft ground.

630.03.094.044 / 30630.03.094.044 / 04

03 – 11

FRAME FRAME ppROTECTROTECTiiOOnn SET SET

950 / 990 ADVEnTURE» 95

602.12.092.060 03 – 11

UniVERSAL pLUG

Necessary for the modification

of the power supply cable of the

navigation system to be able to fit

with the socket 601.11.042.044.

600.12.073.044 03 – 08

ROADBOOK hOLDER KiT

Durable, water-proof mount incl. Handlebar remote control, on-board plug

and installation materials. Illuminated road book housing, electrically

powered with brake. Road book format: A5, up to 80 pages.

601.12.092.070 03 – 11


Universal application possibilities

for mounting the GPS holder. Can

also be used for other models.

620.10.965.118






601.10.051.042 / 04 Z42 601.10.051.045 / 04 Z45

SpROCKET

If you think a steel sprocket is too heavy and an

aluminum sprocket wears out too quickly then we have

the perfect sprocket for you! A steel outer chain ring

combined with an inner aluminum carrier combines

the best of both worlds to create a light weight long

lasting sprocket. This not only increases rear sprocket

life but also the front sprocket and chain life for up to 3

times compared to normal sprockets. If you are looking

for the highest quality sprocket available and one that

matches the image of your KTM your search is over!

620.02.903.050

03-11





620.02.903.150

03-11

GpS / p/ p/ DA BAG LARGE


620.02.903.000

SUSUppppORTORT FOR G FOR GppSS // p p/ p// p/ DA BAGSDA BAGS


handlebar supports!

950 / 990 ADVEnTURE» 107

601.12.024.200


601.12.025.200


These new style travel cases are made of two ultra strong materials. The sidewalls

are made of high strength aluminum and the corners are made of impact-resistant

plastic parts. The components are vary durable and water-proof bonded by a

specially developed riveting technology! Volume of each case is app. 37 L. To

secure your luggage an additional lock kit 60112023050 (includes 4 locks for both

cases) is available. To secure side cases and top case, please order the lock kit

60112023150 (includes 6 locks). Optional inside pockets available: 60112024070.

601.12.020.100

03–11

qUiCKLOCK CARRiER KiT /ADVEnTURE CASE

601.12.020.200

03 – 11

qUiCKLOCK CARRiER KiT /BLACK ALU CASE

This kit contains the quicklock carrier system (which stays on the bike)

and the adapter for our KTM Adventure cases (which can be removed

within seconds from the bike). Cases are not included, please order

seperately! With removed adapters you will nearly not recognize that

you have mounted a carrier system on your bike for fullsize cases!

601.12.920.000

LOCK FOR qUiCK LOCK CARRiERSYSTEM


601.12.024.070

innER TRAVEL BAG

Keep your contents organized with this high

quality, multi compartment travel bag. For use

with the Black Aluminum Luggage.

601.12.024.060


Adding these belts to your side cases, you can easily


601.12.027.000


38 L volume. Optional inside pockets available:

601.12.027.070.601.12.027.070.

756.12.978.000

UniVERSAL REAR BAGVERSAL REAR BAG / BACK/ BACK/ pACK

This new designed bag can be used as rear bag on the carrier This new designed bag can be used as rear bag on the carrier



an additional storage room for small items and rubber straps on

the top to fix a jacket, gloves, etc.

950 / 990 ADVEnTURE» 101

601.12.092.050 03 – 08



620.12.092.044 03 – 11


Universal application possibilities for mounting the

GPS holder.

601.12.092.150 09 – 11



601.12.092.180 03 – 11


With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that

it does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070),

which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150)

for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

601.29.074.050 07 – 11

ChARGinG CABLE

Special charging cable for the 990 Adventure. Connect

the battery charger 58429074000 and the stock outlet

with the charging cable and the starter battery gets

charged. Very simple, but ingenious.

601.12.092.080 03 – 11






601.12.092.140 03 – 11

GpS BRACKET FOR TOMTOM RiDER 2

With this elegant lockable construction, your navigation system

can be mounted on your motorcycle so that it does not vibrate.

As well as the classic fastening on the handlebar cross member

(601.12.092.070), which can be used with almost all models,

there is a special edition (601.12.092.050 or 601.12.092.150)

for the 950/990 Adventure whereby the navigation system is ide-

ally positioned on the bike.

601.12.092.040 03 – 11

GpS BRACKET FOR TOMTOM RiDER





601.11.042.044 03 – 06

OUTLET KiT

Necessary for models 03–06 when a source

of power is needed for a navigation system or

for any other use.

950 / 990 ADVEnTURE» 105

601.12.078.000

ROLLBAG





equipment dry!

600.12.019.100 03 – 11

TAnK BAG

Tank bag for mounting on the tank. Made with extra tough zippers

and abrasion-resistant edging of reflex material. Adjustable size main

compartment, three smaller compartments, map sleeve. Total capacity:

18 litres. Includes carrying handle, shoulder strap and rain cover.

600.12.078.100

REAR BAG

Bag with Quick-Lock System for easy

mounting.The volume of the bag is

between 12 and 18 liters variable.

The bracket 600.12.027.550 is also

necessary for correct mounting.

600.12.027.252




600.12.027.500

TOpCASE 37

This topcase with an internal volume This topcase with an internal volume

of 37 liters is using the practical of 37 liters is using the practical

press-lock-system. The bracket press-lock-system. The bracket

601.12.927.044 is also necessary for 601.12.927.044 is also necessary for

correct mounting. Size: 49 x 40 x 31 cm.correct mounting. Size: 49 x 40 x 31 cm.

600.12.027.352




600.12.027.600

TOpCASE 46

This topcase with an internal volume of 46 litres is capable of holding two full-face

helmets. It features the latest generation snap-shut locking mechanism. It boasts an

extremely smart design with great personality. For mounting you also need the bracket

601.12.927.044. Size: 58 x 42 x 31 cm.

601.12.178.000

ZippER LOCK



600.12.078.100, 600.12.019.100

and 600.12.078.000.

600.12.025.060

inSiDE pOCKET 35 L

The clever option to the aluminum suitcase system. Whether

you're staying in a tent or a hotel: your luggage is always

close at hand.

601.12.978.044


Perfect for fixing the roll bag.

601.12.927.044

BRACKET FOR TOpCASE

For Topcase 37, 46 and rear bag 600.12.078.000,

600.12.078.100 and Topcase 601.12.027.000.

950 / 990 ADVEnTURE» 103

690 LC4690 LC4690 LC4690 LC4690 LC4690 LC4690 LC4690 LC4690 LC4111

584.10.051.048 / 04

SXS.05.450.220 03 – 11

CnC hhYDRAULYDRAULiiC CLUTCC CLUTCh COVER


610.04.037.050 03 – 11


600.13.030.100 03 – 11

BRAKE pADS FROnT

Sintered brake pad with the best price/performance

ratio. Will help reduce brake noise. Should be not

mounted on bikes with ABS System.

600.13.059.200 03 – 11

CnC FOOT BRAKE CYLinDER COVER


600.30.126.200 03 – 11

CnC CLUTCh COVER



600.13.003.100 03 – 11

CnC hAnD BRAKE CYLinDER COVER

CNC-machined design made of


770.13.920.000 03 – 11

BRAKE BLEEDER SCREw


this new bleeder screw with special holding valve,

you simply open the screw of the return-valve a

half turn and pump the brake fluid through the

brake system. The special holding valve prevents

air getting sucked back into the system. The

result: you don't need to have a second person

to pump or open and close the bleeder screw.

Changing the brake fluid or bleeding the system is

done in seconds. Comes with anodized mud cap.

770.13.920.000 for front brake caliper 03-11.

600.35.040.100 03 – 11

ALUMinUM RADiATOR pROTECTOR GRiLL

Black-coated aluminum, for better cooling.

780.09.099.000765.09.099.000

03–11

RiM STiCKER SET

Orange or black colored, ready cut sticker for

adding on front and rear rim.

772.30.002.060 / 04 03 – 11


950 / 990 ADVEnTURE» 109

163

7978 8180

8584 87868382

9190 93928988

7776 9796 99989594

103102 105104101100

109108 111110107106

OVERViEw»

584.10.051.038 / 04 Z38584.10.051.040 / 04 Z40584.10.051.042 / 04 Z42584.10.051.044 / 04 Z44584.10.051.046 / 04 Z46584.10.051.048 / 04 Z48584.10.051.049 / 04 Z49584.10.051.050 / 04 Z50584.10.051.051 / 04 Z51584.10.051.052 / 04 Z52

REAR SpROCKET ORAnGE

This sprocket has steel teeth and an aluminum inner part.

Both sections are permanently joined by high strength rivets.

Stealth sprockets last at least 3 times longer than any other

aluminum sprocket whilst it is half the weight of a normal

steel sprocket. The steel teeth also offer greater life for your

whole system. Not just the sprocket, but the chain and front

sprocket as well. If you are looking for the ultimate in quality

and performance, this sprocket will meet your demand.

580.33.029.014 Z14580.33.029.015 Z15580.33.029.016 Z16580.33.029.017 Z17

FROnT SpROCKET

582.10.051.042 Z42582.10.051.045 Z45582.10.051.048 Z48582.10.051.050 Z50

REAR SpROCKET STEEL

Very durable, recommended for

long trips.

583.10.051.038 Z38583.10.051.042 Z42583.10.151.040 Z40583.10.151.045 Z45583.10.151.048 Z48583.10.151.049 Z49583.10.151.050 Z50583.10.151.051 Z51583.10.151.052 Z52

REAR SpROCKET

High strength aluminum, extra light.

503.10.800.118 / 04

5/8 x 1/4 (520)

ChAin Z RinG

The special Z-ring compresses when assembled creating a better seal. The special Z-ring compresses when assembled creating a better seal.

This ensures smooth action and longer chain life. 118 link.This ensures smooth action and longer chain life. 118 link.

772.10.965.118

5 / 8 X 1 / 4 (520)

ChAin BLACK SCALE

The Black Scale chain by RK is a The Black Scale chain by RK is a

performance chain that combines performance chain that combines

great technical features with an great technical features with an

exclusive appeal coming from exclusive appeal coming from

its black hard coated plates with its black hard coated plates with

brassed pins and rollers. 118 link.brassed pins and rollers. 118 link.

U695.1067 Z41U695.1068 Z44U695.1069 Z48U690.6815 Z49U695.1070 Z50U690.6816 Z51U695.1071 Z52

REnThAL SpROCKET

Made exclusively for KTM by Renthal, these orange

anodized rear sprockets are used by the KTM Race Teams.

Lightweight, durable and provide great performance.

143690 LC4»

601.12.092.070


For GPS brackets page 105.

600.12.073.000

ROADBOOK

Electrical drive incl. paper brake, manual operation possible,

extra large paper roll: up to 80 A5 sheets (approx. 17 m),

Waterproof, Lighting included, opens and closes with no

tools, housing dimensions: (L x W x H) 197 x 124 x 70 mm.

If you want to mount the roadbook on the handlebarsupport

601.12.092.070 or on the roadbook carrier 582.12.090.144

you also need for mounting 600.12.173.070.

750.38.050.044 SM / DUKE

OiL COOLER SET

Specially developed for riders who use their Supermoto /Duke

on the race track. Thereby the oil temperature is always

indicated in the green area.

765.06.115.000 EnDURO / SMC

FOAM AiRFiLTER

765.07.008.060 EnDURO / SMC

FOAMRUBBER FOR TAnKCAp

Prevents dirt and mud from falling

into the tank when refueling.

772.30.002.060 / 04 SM / DUKE / SMC / EnDURO


750.38.041.100 SM / DUKE / EnDURO / SMC

OiLFiLTER CAp

CNC machined design made of high-strentgh

aluminum, orange anodized.

750.06.115.100 SM / DUKE

K&n AiRFiLTER

Increases airflow for more power and washable

for extended service life. Works great when

combined with the factory exhaust system.SXS.05.450.200

SXS OiL pLUG


137690 LC4»

(A) (B)

U695.1087

hUB DECAL KiT

602.02.179.000 / 28602.02.179.000 / 04

5200.0024 ALL USD FORKS 43 MM (A)5200.0090 ALL USD FORKS 48 MM (B)5200.0091 ALL USD FORKS 48 MM (C)

FORK pROTECTiOn STiCKER SET

Extra thick material, protects your fork against stones.

590.03.090.250

FOAM

To be mounted between engine and skid

plate. Thereby, less mud can collect there

allowing the engine to cool better.

548.02.005.000

BAR EnDS

Eliminates the need to replace ripped-up grips

whenever your machine kisses the ground.

780.09.099.000

RiM STiCKER SET 21" /18"

Ready cut sticker for adding on front and rear rim.

765.09.099.000

RiM STiCKER SET 21" /18"

611.09.099.000 611.09.099.000 / 20

RiM STiCKER SET 17"

Ready cut sticker for adding

on front and rear rim.

780.02.979.000 / 28780.02.979.000 / 04

141690 LC4»

780.02.979.000 /28780.02.979.000 /04

hAnDGUARDS

602.02.179.000 /28602.02.179.000 /04

hAnDGUARDS

765.08.999.000

EnDURO / SMC

GRAphiCS KiT BLACKT BLACK

Not useable for Enduro R.Not useable for Enduro R.

780.11.909.100 / 30

EnDURO R

hEADLAMp GRiD

780.01.094.100 / 04

EnDURO

FORK pROTECTiOn SET

780.01.094.100 / 30

EnDURO

FORK pROTECTiOn SET

765.08.013.000 / 30765.08.013.000 / 04

EnDURO / SMC

REAR FEnDER

765.08.001.000 / 30765.08.001.000 / 04

EnDURO / SMC

780.08.001.000 / 30780.08.001.000 / 04

EnDURO R

hEADLiGhT MASK

765.08.041.000 / 30 L 765.08.041.000 / 04 L765.08.042.000 / 30 R765.08.042.000 / 04 R

EnDURO / SMC

SiDEFAiRinG


765.08.050.000 / 30 L 765.08.050.000 / 04 L765.08.051.000 / 30 R765.08.051.000 / 04 R

EnDURO / SMC

SpOiLER


765.08.010.000 / 30 765.08.010.000 / 04

EnDURO

773.08.210.000 / 30773.08.210.000 / 04

SMC

765.08.010.100 / 30765.08.010.100 / 04

EnDURO R

FROnT FEnDER

139690 LC4»

TOOLSTOOLSTOOLS147

U690.8840


FOOT-pEG SLiDERS

Fiberglass reinforced plastic material,

fits on all bikes with foot peg numbers

590.03.041.250 right and

590.03.040.250 left.

SXS.08.125.610

BLEEDER VALVE SET

Specially for WP Fork designed bleeder valves,

allowing quick and accurate removal of built up,

unwanted air inside your fork legs.

780.03.940.144

SMC / EnDURO

piVOTinG FOOTpEGS

Pivot Pegz have a unique & precisely tuned spring loaded pivoting action Pivot Pegz have a unique & precisely tuned spring loaded pivoting action

that actively tracks with the motion of the riders feet. Used by thousands that actively tracks with the motion of the riders feet. Used by thousands

of riders worldwide. Patented & race proven pivoting action improves grip, of riders worldwide. Patented & race proven pivoting action improves grip,

comfort & control while actively promoting correct riding technique & comfort & control while actively promoting correct riding technique &

reducing fatigue.

548.03.040.000

ADJUSTABLE FOOTREST

These footrests offer a wide range of adjustability.

They can be tilted 5 degrees forward or backward,

and they can be raised or lowered by 6mm.

548.03.040.050

FOR 548.03.040.000

SLiDERS FOR ADJUSTABLE FOOTREST SET

145690 LC4»

765.12.920.000 EnDURO / SMC

SUiTCASE CARRiER SYSTEM

Rigid steel tubular construction for mounting of aluminum

cases. Simple installation, without any modification

of the passenger foot pegs, perfect load distribution

to the existing mounting points on the chassis.

600.12.025.060

inSiDE pOCKET 35 L

The clever option to the aluminum suitcase

system. Whether you’re staying in a tent, or

hotel: your luggage is always close to hand.

601.12.929.000

ALUMinUM TOpCASE 38 L pCASE 38 L

Size approx: 31 x 40 x 30 cm.Size approx: 31 x 40 x 30 cm.

601.12.924.000

AALUMLUMininUMUM CASE 38 L CASE 38 L

Durable, water-proof individual bags made of 1.5 mm aluminum without edge

welding seams. Rounded constrution with robust plastic protectors on the corners.

Can be used on right and left sides. Fits the luggage rack system 765.12.920.000

(not included). Two locking mechanisms with articulation function for the cover,

locking eyelets on the top and mounts for additional locks. Capacity: approx.

38 liters; 44 x 24 x 39 cm – Inside Pocket = 600.12.025.060.

601.12.178.000

ZippER LOCK



601.12.078.000, 600.12.078.100

and 600.12.078.000.

601.12.078.000

ROLL BAG



attachment straps and shoulder strap. Great for attachment straps and shoulder strap. Great for

keeping clothes and camping equipment dry!keeping clothes and camping equipment dry!

584.12.078.000

REAR BAG

Well thought out rear bag for all LC4 models with many small

compartments. For mounting on the luggage rack.

583.12.078.000

TOOL BAG

135690 LC4»

750.12.027.150 SM / DUKE

BRACKET FOR TOpCASE

For Top case 37, 46 (page 97) and rear bag

600.12.078.000.

765.12.027.050 EnDURO / SMC

BRACKET

For rear bag 600.12.078.000, 600.12.078.100.

For mounting you need the suitcase carrier system

765.12.020.000, or the original provided handhold.

765.12.090.044 EnDURO

ROADBOOK CARRiER

Change your 690 Enduro into a Rally. Stable construction

for racing use. For mounting the roadbook carrier

600.12.073.000 the wiring harness 765.12.090.090

and remote control 600.12.073.080 are also required.


REAR BAG

Bag with Quick-Lock System for easy mounting. The

volume of the bag is between 12 and 18 liters variable.

The bracket 750.12.027.150 or 765.12.027.050

is also necessary for correct mounting.

756.12.978.000

UniVERSAL REAR BAG /RUCKSACK

This new designed bag can be used as rear bag on the carrier plate of the bike,

or as rucksack on the riders back. By using the circular zip, the volume can be or as rucksack on the riders back. By using the circular zip, the volume can be

increased very simply. The bag offers a raincover, an additional storage room increased very simply. The bag offers a raincover, an additional storage room

for small items and rubber straps on the top to fix a jacket, gloves, etc.

133690 LC4»

750.08.065.044 SM

TOURinG winDSCREEn



756.08.065.100 DUKE

TOURinG winDSCREEn



765.08.065.000 EnDURO / SMC

TOURinG winDSCREEn



620.02.903.050


Great travel bag to help keep Great travel bag to help keep

electronics dry and shock secured. electronics dry and shock secured.

Dimensions: 140 x 90 x 35 mm.Dimensions: 140 x 90 x 35 mm.

620.02.903.150

GpSS / p/ p/ DA BAG BiG

Dimensions: 170Dimensions: 170x130x35 mm.

620.02.903.000

SUppORT FOR GpSS / p/ p/ DA BAGS

For mounting on the stock handlebar supports!For mounting on the stock handlebar supports!

131690 LC4»


BRAKE BLEEDER SCREw


this new bleeder screw with special holding valve, you

simply open the screw of the return-valve a half turn

and pump the brake fluid through the brake system.

The special holding valve prevents air getting sucked

back into the system. The result: you don't need to

have a second person to pump or open and close the

bleeder screw. Changing the brake fluid or bleeding the

system is done in seconds. Comes with anodized mud

cap. 770.13.920.000 for rear brake calipers SM 07-

09, SMC 08-10, Duke 08-10 and front and rear brake

caliper Enduro 08-11. 770.13.920.100 for front brake

calipers SM 07-09, SMC 08-10 and Duke 08-10.

750.03.045.000 SM / DUKE / SMC

FROnT

750.03.046.100 SM / DUKE / SMC

REAR

CRASh pADS

Will protect your forks/swingarm in the event of a crash.

611.09.960.000 DUKE

wAVE BRAKE D


conditions. Even at the highest temperatures the outer disc does not bend or warp due to the advanced design

and race proven materials. The alloy center is lighter than original rotors and is race track approved. Specially

designed for the KTM superbikes this rotor is a great combination of improved performance and visual appeal.

600.13.030.100 EnDURO

BRAKE pADS FROnT

These pads provide consistent feel for use on high

speed tracks with higher braking demands. Works

perfect with stock brake-discs and also with the

wave-disc 61109960000. For race use only!

770.13.920.100 SM / DUKE / SMC


613.03.946.044 SM / DUKE

CRAShpAD FOOTpEG

Crashpads to be mounted on the passenger footpeg.


ADApTiVE BRAKELiGhT

Add increased visibility on the road. In the event of hard braking, the

control unit pulses the rear brake light alerting traffic behind you.

125690 LC4»

611.09.960.000

AVE BRAKE DiSC 320 MM


610.02.055.060 SM / DUKE

CnC CAp CLUTCh RESERVOiR



765.01.099.025 / 04 EnDURO

CnC TRC TRipLE CLAMp

Offset 22.5 or 25.5 mm.Offset 22.5 or 25.5 mm.

765.01.199.035 / 04 SMC

CnC TRC TRipLE CLAMp

Offset 32.5 or 35.5 mm.Offset 32.5 or 35.5 mm.

750.01.099.033 / 04 SM / DUKE

CnC TRipLE CLAMp

CNC machined. Easy adjustable offset 30.5 CNC machined. Easy adjustable offset 30.5

mm or 33.5 mm. Front wheel and Fork

does not need to be removed for changing

the offset. Set includes pivot tube und

lower bearing. When using the offset 33.5

mm the steering lock is not useable. For

mounting of the handlebar you need one of

the three below listed handlebar supports.

610.13.009.100 SM / DUKE

CnC CAp BRAKE-FLUiD RESERVOiR



594.01.039.044 37 mm 594.01.039.144 47 mm

EnDURO / SMC

hAnDLEBAR SUppORT

Available in two different heights.

595.01.039.244

EnDURO / SMC

FACTORY hAnDLEBAR SUppORT

Three possible height adjustments,

28 mm, 37 mm, 46 mm.

SXS.05.450.220 SM / EnDURO / SMC

CnC hYDRAULiC CLUTCh COVER COVER

CNC machined design made of CNC machined design made of


SXS.08.300.040 SM / DUKE / SMC / EnDURO

CnC KnOB ADJUSTER SET


765.13.903.000 EnDURO




611.01.039.044 / 30

hAnDLEBAR SUppORT

586.13.003.100 SM / SMC


CNC machined design made of high-strength

aluminum.

119690 LC4»

765.14.901.044 EnDURO / SMC

X2 LiGhT

The X2 Halogen lighting system features a The X2 Halogen lighting system features a

high quality 4" driving lamp and 2" spot lamp high quality 4" driving lamp and 2" spot lamp

to turn night into day! This self contained to turn night into day! This self contained

lighting system is great for upgrading your stock lighting system is great for upgrading your stock

lighting. Meets DOT approval standards. lighting. Meets DOT approval standards.

Comes with a black mask but a orange headlight Comes with a black mask but a orange headlight

mask (780.08.907.000/04) is also available.mask (780.08.907.000/04) is also available.

123690 LC4»

548.02.001.300 / 04 EnDURO / SMC

ORAnGE hAnDLEBAR

Laser etched positioning grid. Made for KTM exclusively by

Renthal. 604 Bend 28.5 mm large diameter clamping area.

Dimensions: A: 99 mm; B: 802 mm; C: 54 mm.

SXS.07.125.200

EnDURO / SMC

phDS pROGRESSiVE hAnDLEBAR DAMpinG SYSTEM

Advantages:

– Headshake and hard hits dampened.

– Vibrations from chassis and engine absorbed.

– Handlebars additionally damped in horizontal direction.

– Optimal steering precision.

– Handlebar height adjustable in two positions.

– Protects the hand and shoulder joints.

– Individual set-up possible due to the selection of different damping elements supplied.

– CNC-milled.

121690 LC4»


EXTEnSiOnS REAR ViEw MiRROR

If you want to improve your rear view, this is the solution for you. Mounts

betweens the stock mirrors and adapters.

765.35.940.000 EnDURO / SMC

RADiATOR pROTECTiOn

756.12.962.044

SM / DUKE

BRACKET FOR U-LOCK

The practical solution, to fix the U-lock 600.12.016.000

on your bike. Made of steel. Black powder-coated.

756.12.918.000

SM / DUKE

BRACKET /U-LOCK KiT

As 756.12.962.044 but with U-lock 600.12.016.000.

601.03.923.050 EnDURO / SMC

STAnD pLATE BiG

With this bigger stand plate your bike stands really safe,

even on soft ground.

750.07.040.100 SM / DUKE

ERGO SEAT LOw

Duke: Height identical to standard seat /

Supermoto: –20 mm.

756.07.040.100 SM / DUKE

ERGO SEAT MiD

Duke: +20 mm/Supermoto: Hight identical

to standard seat.

765.07.940.000 EnDURO

ERGO SEAT

New developed seat foam adds all day

comfort. Height is similar to stock.

750.07.040.200 SM / DUKE

ERGO SEAT hiGh

Seat with gel insert. The gel insert will increase the comfort, especially on long trips.

Duke: +40 mm / Supermoto: +20 mm (measures compared to standard seat).


TAnK BAG





129690 LC4»

750.12.019.100

SMC / EnDURO

750.12.035.044 SM / DUKE


750.03.090.000 SM

SKiD pLATE

765.03.090.100 EnDURO / SMC

SKiD pLATE ALUMinUM

750.35.940.000 SM / DUKE

RADiATOR pROTECTiOn

600.12.035.100 SM / DUKE

ALARM SYSTEM


construction. Integral movement sensor. Seat is also secured. 2 x waterproof anti-scan, anti-grab

rolling code remote transmitters. Lithium transmitter battery (3 year life).


nEOpREnE FORK COVER

The perfect neoprene protection for your forks, for

use with closed fork protection.

U691.0017 SM / DUKE / SMC / EnDURO

ThROTTLE CAM SYSTEM

Precision machined aluminum throttle tube with delrin inserts for

smooth throttle action. Includes three updated cam profiles designed

to give different throttle response with fuel injected bikes.

690.34.931.044 SM / DUKE




690.13.950.044 SM / DUKE




127690 LC4»

756.05.099.000 DUKE

EVOLUTiOn TiTAniUM SiLEnCER

This exhaust system is specially developed for the Duke. This means light

weight and maximum performance gains. Mounting only possible in combination weight and maximum performance gains. Mounting only possible in combination

with the factory header 756.05.907.000. For closed course use only.

756.05.907.100 DUKE


765.05.099.200

EnDURO / SMC

SLip-On ALUMinUM SiLEnCER

Slip-on Silencer with very nice cost- performance ratio. The Slip-on Silencer with very nice cost- performance ratio. The

combination of aluminum outer sleeve and stainless steel endcap combination of aluminum outer sleeve and stainless steel endcap

guarantees low weight and good durability. For closed course use only.For closed course use only.

117690 LC4»

765.05.991.000 / 49 EnDURO / SMC

CARBOn FROnT hEAT pROTECTOR

Only for use on Akrapovic Titanium Factory

Header 765.05.907.100. On 690 SMC also

useable for the stock header.

765.05.990.060 / 49 EnDURO / SMC

CARBOn REAR hEAT pROTECTOR

For Mounting on original Exhaust, but also for


and Silencer 765.05.099.000.

765.05.990.050 / 49 EnDURO / SMC

CARBOn CEnTER hEAT pROTECTOR

For mounting on original Exhaust, but also for


and Silencer 765.05.099.000.

765.05.099.000 EnDURO / SMC

SLipOn TiTAniUM SiLEnCER

765.05.907.100

EnDURO /SMC


The Akrapovic system is designed for KTM riders who are looking

for the finest available aftermarket exhaust systems and know how

to get the most out of the increased performance on the track.

The system comes with the hexagonal design muffler, which goes

great with the sharp lines of your KTM. Removeable spark arrestor

included. Mounting possible with original header and also with

the factory header 76505907000. For closed course use only.

765.06.102.000 EnDURO / SMC

TUninG-KiT EVO 1

Stage 1 tuning kit containing the open air filter

cover. Note: For proper performance the special map

must be used. For closed course use only.

765.12.945.000 EnDURO / SMC


Stage 2 kit contains the high performance exhaust

system matched with the open air filter cover for solid

performance gains. Note: For proper performance the


765.12.945.200 EnDURO / SMC

TUninG KiT EVO 2

Give your 690 engine additional performance with

the KTM EVO 2 engine kit. This kit includes a K &

N cone style racing filter, revised racing cam shaft

and filter mounting kit. For maximum performance,

the Akrapovic exhaust system should be used with

this kit. Note: For proper performance the special

map must be used. For closed course use only.

765.12.945.100 EnDURO / SMC



exhaust system.

756.12.945.100 DUKE

TUninG-KiT EVO 1

Give your 690 engine additional performance with the KTM

EVO 1 engine kit. This kit includes a K & N cone style racing

filter, revised racing cam shaft and filter mounting kit. For

maximum performance, the Akrapovic exhaust system should

be used with this kit. Note: For proper performance the


756.12.945.000 DUKE



exhaust system.

115690 LC4»





756.08.010.000 / 49 DUKE

CARBOn FROnT FEnDER

756.04.050.000 / 49 DUKE

CARBOn hUGGER

113690 LC4»

165

133132 135134

139138 141140137136

145144 147146143142

131130115114 117116

121120 123122119118

127126 129128125124

113112

595.12.030.000

EEXXhhAUSTAUST p pLUGLUG


cleaning, for 15–38 mm inner diameters.

595.12.030.100

EXhAUST pLUG


cleaning, for 40–62 mm inner diameters.

812.12.016.000

wASh CAp FUEL hOSE


supply line. This allows you to remove your tank for service and

keep your fuel supply line clean.

U695.1562

pLASTiC DRUM

KTM orange plastic drum for race purpose.

Complete with flexible hose and twist-on

cap. Approximately 18 liters volume. In some

countries it is not allowed to use the drum for

transportation of fuel or to store fuel indoors.

590.29.050.000

FUnnEL

Specially designed to suit KTM fuel tanks. Specially designed to suit KTM fuel tanks.

This funnel has an optimised diameter to

suit two different filler necks and also has

an integral groove for perfect ventilation

during filling.

600.12.016.000

hiGh SECURiTY U-LOOK

Double closing U-type lock. Hardened steel body. 7 pin tubular lock, drill

protected, complies with best standards, 250,000 key variations, increased

resistance to picking, supplied with 2 keys. Rotative PVC lock protector.

Hardened steel shackle, resists hacksaws and boltcutters. Corrosion protection Hardened steel shackle, resists hacksaws and boltcutters. Corrosion protection Hardened steel shackle, resists hacksaws and boltcutters. Corrosion protection

by electrical deposit treatment, PVC coated. Tensile strength superior to 12 tons.by electrical deposit treatment, PVC coated. Tensile strength superior to 12 tons.by electrical deposit treatment, PVC coated. Tensile strength superior to 12 tons.

780.29.063.000

MEASURUnG CUp 1000 ML

Volume 1 L.. Features scale, perfect Volume 1 L.. Features scale, perfect

for oil change on your bike. Easyfor oil change on your bike. Easy

handling due to ergonomic form.handling due to ergonomic form.

780.29.062.000 / 30

MAGnETiC BOLT pAn

With magnetic application, no more

lost screws!

625.12.007.000


No chance for dust, or unwanted scratches etc to damage

your bike, thanks to the KTM indoor bike cover which makes

your bike an eye-catcher in the garage aswell. The cover is

made from a special fabric with a distinctive structure that

does not allow dust or condensation to pass through. The

inner-side has a soft lining.

590.12.007.000

pROTECTiVE COVER OUTDOOR

Strong, lightweight bike cover that is UV and

water resistant. The sewn in elastic band

along the bottom keeps the cover secure to

the bike. Great for travel, this cover folds

up small into the supplied carrying case.

U695.1409

MAGnETiC BOLT pAn

An easy way to keep track of those bolts when An easy way to keep track of those bolts when An easy way to keep track of those bolts when

maintaining your KTM. Features a strong maintaining your KTM. Features a strong maintaining your KTM. Features a strong

magnetic bottom with a rubber coating.

TOOLS»

772.31.997.000/04

VEnT hOSE

Petrol resistant, perfect for tank and

carburetor ventilation. Approx. 3 meters

long. Should not be used as supply line.

601.12.919.000

hELMET LOCK AnD DRY BAG

This little package includes all you need to secure This little package includes all you need to secure

your helmet on your bike. Incl. steel cord, number your helmet on your bike. Incl. steel cord, number

lock and waterproof bag to carry the helmet.

OSE


OSE


153

451.29.075.000

REV METER

Usable on 4-stroke and 2-stroke engines,

displays up to 16,000 rpm.

U695.1439

VALVE CAp SET

U695.1099


every KTM tool box. Features a stainless steel

braided line, rubber coated exterior and a pressure

release button.

773.29.068.000

TiRE GAUGE DiGiTAL

Comfortable and easy to use. Fits all currently

available valves. Pressure display in bar or

psi. Integrated pressure release valve for

accurate pressure adjustment. Switchable

display and work area lighting. Battery saver

mode by means of automatic switch-off. Max.

measurable pressure 11 bar / 154 psi.

U690.8840

SChRADER VALVE CAp SET

Orange anodized cap with schrader valve removal tool.

584.29.074.100

BATTERY ChARGinG AnD TESTinG UniT

Test, charge and store batteries: a fully automatic and protective

battery charger thanks to a programmed charging characteristic.

The well arranged LC-Display shows the charge state, reverse

polarity protection, short-circuit-protection, overload protection;

absolutely simple and safe. Plug for USA: 58429074004.

U690.9801

BATTERY CBATTERY ChhARGERARGER

Battery charger with test function. Further functions:

– Constant current charge,

– Constant voltage charge,

– Float charge.

Includes cable to fix on the battery with quick

plug to be connected to the charger.

773.12.030.000

FOOT-AiRpUMp

Mini-footpump with pressure gauge on the swivelling valve

head that fits all prevalent valves. Integrated double-

cylinder with pressure switch-over to high pressure. Max. 12

bar/160 psi. Height: approx. 170 mm folded together.

TOOLS»

U695.1130

ORAnGE CABLE TiES

100 pieces, length: 20 cm.

U695.1099

TiRE GAUGE


U6909.852

TiRE wARMERS










151







610.12.016.000

BRAKE LOCK

The assistance for loading the bike, or

lifting it with the rear wheel stand.

U691.0046

SOFT TiE DOwnS

These tie-down straps have soft ties built in, so

you don’t scratch your bars. KTM orange /black

with distinctive KTM Racing markings.

U691.0047

SOFT TiE DOwnS wiTh CLipS



fasteners. KTM Orange/black with distinctive KTM PowerParts markings.

U695.5037

SOFT TiE DOwnS

These tough KTM soft ties allow you to strap down

your bike without scratching your handlebars or

tank. Built from a durable ballistic nylon, they have tank. Built from a durable ballistic nylon, they have

a 615 LB weight capacity. Dimensions: 1.5" x 6’.

TOOLS»

601.12.002.000

TRAnSpORT hARnESS STREET

This transport harness allows a safe handlebar connection point

and moves the anchor point away from expensive body panels.

Together with one of the soft tie down sets, the bike is perfectly

secured on the way to the next race track. Harness features robust

plastic cups with rubber inlet to avoid damages to the handlebar.

000.29.098.100

TTOOLBOX

With this 3 /8" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the plastic parts

or carrying out an oil change on your KTM, you’ll find the right tool here. 60-item, orange tool box, high-quality chrome-vanadium

tools. Ratchet (with locking device), clamping bolt, two extensions and socket wrench. Nut spinners from 6 to 24, Allen keys from

3 to 10, Phillips, slotted, as well as Torx bits from 15 to 55.

000.29.098.000

TOOLBOX

With this 1/4" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the With this 1/4" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the

plastic parts or carrying out an oil change, you‘ll find the right tool here. 38-item, orange tool box; high-qualityplastic parts or carrying out an oil change, you‘ll find the right tool here. 38-item, orange tool box; high-quality

chrome-vanadium tools. Ratchet (with locking device), clamping bolt, two extensions and socket chrome-vanadium tools. Ratchet (with locking device), clamping bolt, two extensions and socket

wrench. Nut spinners from 4 to 14; Allen keys from 3 to 8; Phillips, slotted, as well as Torx bits.wrench. Nut spinners from 4 to 14; Allen keys from 3 to 8; Phillips, slotted, as well as Torx bits.

157



610.29.055.130

SET OF RUBBER A ADApTERS

610.29.055.600 RC8


As 610.29.055.500 with additional location bolt

610.29.055.610, specially for RC8.

610.29.055.500 950 / 990 ADVEnTURE990 SUpER DUKE690 SM / DUKE


Front headstock stand should only be used

when rear wheel stand is already mounted.

610.29.055.400

REAR whEEL STAnD

For using the rear stand, you also need

one of the three possible adapter kits.

610.29.055.300 RC8 990 SUpER DUKE950 / 990 SM690 SM / DUKE / SMC640 DUKE


Including fork adapters, front wheel stand should only be

used when rear wheel stand is already mounted.


wORKShOp ADApTERS


SET OF FORK ADApTERS wiTh BOBBinS


BOBBinS FOR REAR whEELSTAnD

U695.1277

FOLDinG BiKE RAMp

This lightweight KTM bike ramp is the best one we have

tested for daily use. This folding ramp is made of a high

strength aluminum, and designed for reliable easy use.

The ramp also incorporates a safety strap, when used

properly, keeps the ramp from sliding forward when

you are loading and unloading your bike. Total length is

~200 cm, folded its ~100 cm. Weighs less than 5,5 kg.

180 kg max. capacity.

TOOLS»

780.12.006.000

piT MAT

At many races already a must in the service zone! This mat helps

with finding fallen tools, bolts and other small parts when service

your KTM in the pit area. Due to the special material mix, it features

perfect protection against environmental pollution when quick

fueling during the race. The KTM design brings perfect factory look

to your service- and fuel zone. Dimensions: 160 x 100 cm.

– Factory look for your pitPit mat

149

579.29.020.000

ChChAAin in BREAKERBREAKER

5/8 x 1/4.

U690.7854

wiRE pLiERS

Safety wire your bike quickly and

securely using these specialty pliers.

548.12.061.000

SAFETY wiRE

Required for most road racing.

Stainless steel type 302/304 ASTM

wire. .025 mm diameter. 1lb.

510.12.093.000

TiRE iROn LOnG

U695.1045

TiRE iROn SET

510.12.091.000

SpOKE wREnCh

6 and 7 mm.

510.12.092.000

TiRE iROn SMALL

Special Tire lever optimized for KTM. Short version Special Tire lever optimized for KTM. Short version Special Tire lever optimized for KTM. Short version

ideal for the travelling tool kit. Longer version for ideal for the travelling tool kit. Longer version for ideal for the travelling tool kit. Longer version for

minimum effort when using.

583.10.025.000

AXLE GAUGE

503.05.017.000 / 04

SpRinG hOOK

Easy spring removal.

590.29.041.000 0,10; 0,12; 0,15; 0,20; 0,25.

590.29.041.100

0,05; 0,10; 0,15; 0,20; 0,25; 0,30; 0,35.

FEELER GAUGES

000.29.098.200

SCREw DRiVER SET

High quality 5 piece screw driver set

in KTM design.

U695.1188

CLEAninG KiT

Everything you need to keep your KTM

looking showroom clean. Kit includes

a 5 gallon KTM bucket, mud scraper,

1 liter spray bottle of Motorex Moto

Clean 900, 15 mm x 38 mm exhaust

plug, sponge, and a quick-dry towel.

TOOLS»

U695.1126

SpOKE TORqUE wREnCh

Avoid the common problem of overtightening your spokes. Avoid the common problem of overtightening your spokes. Avoid the common problem of overtightening your spokes.

This wrench is preset and lets you know when your spokes

are properly tensioned.

155

OVERViEw» 167

151

157

150

156

153152

155154

149148

Documents

KTM PowerParts Catalog Street USA 2011