KSA Consumer Guide 2015

2015 KSA CONSUMER

GUIDE

EVERYTHING AND THE KITCHEN SINK

HINTS & TIPS, SERVICES, SUPPLIERS, ADVICE, AND MUCH MORE...

1 Return to Contents Page

CONTENTS

INTRODUCTION 2

ABOUT THE KSA AND ITS MEMBERS 3

FINAL THOUGHTS 4

WHY INVEST IN YOUR KITCHEN 8 -9

GET THE MOST OUT OF YOUR STONE BUDGET 14 -15

BOARD IN THE KITCHEN 18 -19

THE DO’S AND DON’TS OF TIMBER 22 -23

A WORD FROM THE NATIONAL COMMITTEE 27

MY NIGHTMARE USING A NON-KSA MEMBER 31

PLANNING A KITCHEN. WHAT TO EXPECT. 36 -37

WHY GIVE YOUR KITCHEN DESIGNER A BUDGET 40

KSA MEMBER LISTING 42-48

2

The objective of this booklet is to give you valuable information about the Kitchen Specialists Association (KSA) and how it can help you make well-informed choices when looking to purchase a new kitchen. Thousands of people have kitchen installations completed successfully. How do they do it? The answer is proper planning – know what you want, what you can afford and use a reputable company.

An important role of the KSA is protecting the rights of the consumer. Members provide quality products by ensuring that the best materials

are used within your price range. Consumers have peace of mind that there is an objective third party on hand to assist them and certainty that outstanding service before, during and after installation is given by the member. Whatever the budget we have a member who can cater to your need whether it is a DIY, local or imported product.

The KSA can only offer you, the consumer, assistance and protection if you choose to work with a KSA member and make use of the facilities put in place to offer you security.

The KSA is an industry parent body with a fundamental mission and vision:

Our mission is to create a professional and stable trading environment in which the industry can prosper and consumers can enjoy complete peace of mind.

Our vision is to be a national organisation, representing the countries reputable kitchen manufacturers and associated product suppliers with the purpose of offering the public peace of mind by association as well as facilitating solution driven resolutions between members and consumers in areas of dispute.

INTRODUCTION


KSA membership is granted in two fi elds. Companies that manufacture and/or install kitchens - these companies are required to offer you a minimum guarantee of one year on their product and installation. They must also have a showroom where you can view the quality of product and installation you can expect in your home - and companies that are affi liated to the kitchen industry by supplying a wide range of products and services to the kitchen industry.

By ensuring your kitchen company is using products supplied by a KSA registered supplier you increase your safety net for recourse should anything go wrong.

The KSA has a strict code of ethics to which all members subscribe. The code covers manufacturing, installation and service standards.

Membership is not easily awarded and member’s references are screened on their application. Members must have been trading for a minimum of three years, pass a reference check and be in good standing within the industry.

All members must also agree to abide by any ruling handed down by the KSA or risk suspension or expulsion from the association.

Members get a service award each year should they receive no site inspections. This recognition is highly prized by members.

The KSA Holding Account:The KSA Holding account offers a safe place

for disputed funds, deposits and fi nal payments. It can be utilized at any time on the agreement of both parties at no cost to the consumer. Use of the holding account is the only way the KSA can afford protection to your funds. Application forms to utilize the account as well as information on how the account works can be downloaded off our website.

It is an industry standard for kitchen companies to request a 50% deposit on signing of the contract, a further 40% on delivery of carcasses to site. The fi nal 10% is payable on completion of the work and signing off of the job.

ABOUT THE KSA AND ITS MEMBERS

4

CONTACT DETAILS:

National 0860 KSA INFO /0860 572 4630

GautengTel: 011 781 5340Fax: 086 551 6981Email: [email protected]

Kwa-Zulu NatalTel: 082 801 8878Fax: 086 505 6296Email: [email protected]

Cape TownTel: 082 787 8806Fax: 086 551 6978Email: [email protected]

As an industry body we provide advice and guidance. We are always happy to assist you with questions or concerns you may have as you embark on purchasing a new kitchen.

In the unfortunate event of a dispute arising between yourself and a KSA member the incident can be reported to us by downloading the dispute registration forms off our website. We undertake to assist with any legitimate complaint that falls within the kitchens installation and guarantee period. The KSA’s mediation service aims to provide a fair and equitable resolution to your problem without it having to turn legal. All KSA members have signed an agreement to abide by any ruling handed down by the KSA and as such you can deal with a KSA member with the peace of mind that an objective third party is there to assist you through any issues that may arise.

For further information and a full list of members please visit our website or contact your regional KSA offi ce.

Please visit our web site www.ksa.co.za

The KSA Team

FINAL THOUGHTS


6


8

Have you ever been to view a house on show thinking what a beauty it is only to be let down by the state of the kitchen or bathrooms? Most estate agents will agree that the state of your kitchen and bathrooms can swing a sale.

The kitchen has become one of the most important rooms in the home. Contemporary design has brought it out from behind closed doors and into open-plan-living meaning it needs to be ‘furnished’ not just built. If you think about

it, your kitchen is the hub of the home, for family time and entertaining. It should be fi tted out to be both functional and aesthetically in harmony with the rest of your house.

When building, 1/3 of the building costs should be refl ected in your kitchen and bathrooms. When selling, your buyer expects to see this and more. They want to see 1/3 of your asking price refl ected in these rooms. A kitchen is

one of the most expensive rooms in the home. It is unlikely you will redo your kitchen more than once in a particular dwelling. It is vital that when you take on this project that you see it as an investment in your home and your future ability to sell it on and realise your investment.

Most people underestimate the cost of a good kitchen. Remember, the better the quality of the fi nishes and hardware the more expensive the project. Rather save up and ensure you have the budget to do the work properly with a reputable company using the best quality products for your budget.

When choosing your design and aesthetics, bear in mind that you may one day, want to sell. Most new buyers don’t look to buy a property if they immediately have to fork out another

WHY INVEST IN YOUR KITCHEN?


R150 000 on a new kitchen. In other words, keep the design simple with colours, textures and fi nishes that won’t date easily. You can refl ect your personal tastes and quirks with paint and accessories. These can be easily updated when your tastes change or removed when you sell, leaving the new buyer with a fairly blank canvas on which to express their tastes.

If your kitchen is looking a little tired and you are wanting to sell, invest that little extra in giving it a face lift before putting the house on the market. It is amazing what a transformation a few simple changes can make. Replace the old laminate tops with stone, change a wall colour or update the cupboard handles with new ones.

If needed, visit your local door manufacturer and replace the doors on your cupboards with a fresh new fi nish. It doesn’t take a lot of money to bring a slightly out of date kitchen into the contemporary era and this small investment may well clinch your sale and ensure your asking price.

A kitchen is a big investment and one that

should be embarked upon with plenty of planning and forethought. Neither a new kitchen nor a kitchen update should be undertaken without the help of a professional with a proven track record. The last thing you want is someone running off with your sizable deposit or leaving you with a half-fi nished job. Every penny spent will add value to your home and will be a value-add to your investment.

10

ef_ksa_A5.ai 6 2012/11/23 2:39 PM


12

Royal Quartz is produced and checked to very rigid standards, which meet all the technicalspecifications of the world’s leading manufacturers. An exciting range of fashionable colours and a selection of 2 thicknesses, 20mm & 30mm, provides great opportunities for both domestic and commercial applications.

Made with natural quartz - one of nature’s hardest minerals - and through revolutionary technology, We have created this modern, natural surface material. Royal Quartz Surfaces is non-porous, stain resistant, and is practically maintenance free. It is the ideal, most practicalchoice for commercial and residential interior applications.

WHOLESALE GRANITE & QUA

SOLE SOUTH AFRICAN DISTRIBUTORS &CERTIFIED MEMBER OF:

10 YEAR WARRANTY

Tel: 031 579 2901 Cell: 072 281 0444www.jamsonstone.co.za [email protected]

RESIDENTIAL LIFETIME WARRANTY


ARTZ DIRECT TO THE PUBLIC

YOUR GRANITE & QUARTZ SPECIALISTSGranite is the most popular Natural Stone & Counter Top material due to its versatility & superior performance characteristics.We are direct importers and installers of Granite & Quartz surfaces.This includes all your vanities, kitchen & bathroom counter tops, bars, staircases, cladding & water features.

Call us now for In-Store Specials!

10 YEAR GUARANTEE ON WORKMANSHIP

Terms & Conditions Apply

Streak-free formula Fresh citrus scent Safe and recommended for everyday use

Biodegradable & safe for food preparation surfaces

21 Stanhope Place, North Coast Rd(close to Standard Bank)www.royalquartz.co.za

14

Having stone counter-tops in your kitchen is something most people aspire too. Not only does it add to the sophistication of the kitchen but also the perceived value. However, with stone being a fi nite resource it is not something everyone can afford. The price of both natural and engineered stone will climb as resources become scarcer and the cost of transporting the heavy material rises.

So, how do you ensure you can afford the stone tops you want? A stone budget can be managed if you do your homework and empower yourself with some industry knowledge. By selecting the right stone, booking your slab early, designing to maximise slab usage, and considering the thickness, profi le and joints you can make the stone more affordable.

The cost of a slab of natural stone depends primarily on where it comes from and its scarcity. Stone that comes from Europe and South America will be a lot more costly than stone coming from China or Southern Africa. The more exotic the stone the more it will cost. With engineered stone the

pricing will often be dictated by the value of the natural materials used in the manufacturing process. The more design elements that appear in the stone the more expensive it will be. Take the time to meet with your stone fabricator and visit the stone supplier to identify stone that appeals to you from the more cost-effective regions. It may mean compromising a little on the aesthetic but it will help keep the budget under control. If the most cost effective option is not in stock it may be worthwhile putting down a deposit and waiting for new stock to come in.

The availability of different types of stone varies with demand and the time of year. Once you have selected what stone you want it is a good idea to book your slab by paying a deposit. This way the fabricator can purchase your stone and protect you against any price increases that may come to bear from the time you start the process to the time you are ready to install the stone. By taking the time to visit the stone supplier you can personally choose the slab you want. This will ensure you are aware of any nuances to the slab that may appear on your worktop.

GET THE MOST OUT OF YOUR STONE BUDGET


The way your kitchen is designed will also affect the cost of the stone. There are ways to specifi cally design the kitchen worktops to get maximum usage out of a slab of stone and minimize wastage. It is vital you discuss these with your kitchen designer who should liaise with the fabricator for assistance on how to lay out the counter-top overhangs, nooks and islands to get the best use of the slab. The best use of the slab will vary depending on the size of the slab (different suppliers manufacture / import their slabs in various sizes) hence it is vital the kitchen designer consult the fabricator before the design is fi nalised.

The thickness you opt for as well as the profi le you choose will also affect the fi nal cost. The thicker the top the more expensive it usually is. However, in certain materials the ultra-thin tops need the support of a substrate and this will push the price up again. The most economical thickness for natural stone tops is 30mm, while engineered stone can go as thin as 20mm with extra substrate support for long runs of stone. Similarly the more intricate your profi le the more the work will cost. This is because the cutting and fi nishing of the stone becomes more complex and time consuming. Simple profi les like the pencil edge, one quarter bull nose and ten by ten bevel edge are usually the most cost effective.

Everyone likes their stone tops to look sleek and uninterrupted by joints but if you can be a little fl exible on the joint placements the fabricator will be able to get more out of the stone. This is not to say that a join every meter is acceptable but, if the fabricator can have two joints in a long run, rather than one, he may not have to buy an extra slab to complete your work.

If you are using stone elsewhere in your home it is advisable to try and stick with the same stone throughout. This way the fabricator can

use waste from one project to complete the next. When there are multiple types of stone in one project the price will sky rocket as the fabricator will have to buy a new slab for each type you have selected. There will also be a lot of waste.

Consider the time of year. Products and services will always be more expensive towards the end of the year. This is the busiest time for the kitchen industry where demand is high and stock low. If you can plan your kitchen for the slower winter months you are less likely to pay a premium for both the stone and the fabrication and you are more likely to experience a calm and precise installation.

Lastly, ensure you read the terms and conditions set by the fabricator carefully. You need to ensure there are no hidden costs if you change or delay the installation. You also want to ensure that the fabricator is insured for resulting damages just in case something goes wrong on site resulting in damage to your home or possessions during or after installation. Protect yourself and your investment by ensuring you are dealing with a professional company who has trained staff, proper equipment and is legally compliant. Remember, if the fabricator is a KSA member you will have the full support of the KSA to assist you should something go wrong.

Thanks to the Western Cape KSA stone and surface fabricators forum for their help with this article

16

The professional standard for designing kitchen and bathroom interiors.

Discover our fully-integrated drawing and quotation solutions for effi cient

and performing kitchen design.

Tel: 016 428 4018www.compusoftgroup.com

M E M B E R

international slab sales (pty) ltd

Distributors of


18

When purchasing a new kitchen, you may consider the work surface, the colour scheme, handles and hinges and even the layout and how much storage space you will get. But have you considered the base materials that will make up the majority of your kitchen?

Various wood-based boards form the fundamental structure of most kitchens. The way these boards are treated and installed will ultimately determine the durability and longevity of your kitchen. Understanding the type and quality of board your kitchen company is using will help give you piece of mind.

Melamine face board (MFB), also sometimes just called “melamine,” is the most common board used in the manufacturing of kitchen carcasses and door and drawer fronts. MFB consists of particleboard, also known as chipboard, which has had melamine-impregnated decorative paper fused to both sides of the board under heat and pressure. This product is highly functional in vertical kitchen applications as its decorative surface is durable and moisture resistant. However, the exposed edges of the board must be properly sealed and edged with an appropriate edging material, as they are highly susceptible to moisture. While MFB is not recommended for horizontal work surfaces, it is primarily used in vertical applications, such as cupboard sides and doors, as well as for shelving.

MFB from a reputable source, installed, edged and sealed properly offers a practical, durable and affordable solution for your kitchen. If the particleboard / chipboard base or the melamine paper is of inferior quality, the durability and fi nish of the end product will be compromised. Added to that, it is vital that your kitchen company use good quality edging and glue to seal the exposed

edges of the board properly. This will ensure that everyday moisture found in the kitchen does not get absorbed into the board and cause it to swell.

Medium density fi breboard (MDF) is most commonly used for PVC wrapped or spray painted / duco door and drawer fronts. It is also used to manufacture dado rails and architraves. MDF is different to particleboard in that it has a homogenous fi bre construction. This allows the board to be machined and shaped either with a CNC machine or router, creating some of the lovely panelled or shaker doors that can be found on the market. The material is strong and durable and is designed for specifi c applications where decorative surface or high gloss paint fi nishes are required. MDF commands a premium over MFB and is therefore most often used only for the doors and drawer fronts and not for the carcasses. Where a straightforward fl at melamine application is required, you are better served using a particleboard substrate.

Board is not only used in the manufacture of carcasses and door and drawer fronts, but in the manufacturing of worktops too. Postform worktops use a core of particleboard with a high pressure laminate (HPL) as a surface. Premium quality postform worktops also use a balancing surface material on the underside of the top and a glue strip on the front edge where the laminate meets the board, to protect the joint from moisture. The HPL provides a durable, easy-to-clean, non-

BOARD IN THE KITCHEN


porous, hygienic and moisture resistant surface ideal for use in kitchens.

The manufacturing process for HPL has improved dramatically over the years, allowing the decorative fi nishes to be very lifelike in their representation of timber or stone. The profi les and thicknesses of postform worktops have also been adapted to allow more options and be more on trend. Quality here is an absolute necessity. Counter-tops take the majority of the stress and strain in a kitchen and are exposed to stains, scuffs, cleaning materials, heat and water. If their manufacturing and installation is in any way inferior there is a risk of them delaminating or absorbing moisture and swelling. It is vital to ensure exposed edges of postform worktops are suitably sealed. These include the back edges against the wall, the corner joins, the ends as well as sink, hob and plumbing cut-outs. Applying a silicone bead line is simply not enough. All of these edges should have a suitable exterior grade varnish or damp-seal applied to the particleboard core before being put in place. Going the extra mile with this sort of treatment will ensure the tops last.

It is important to note that the wood-based panels used in kitchen construction are not waterproof. Firstly, this is not economically viable and secondly it is not really necessary, provided the surfaces and edges are properly sealed. Some products are available in a moisture resistant option but these come at a premium price and normally have to be specially requested when you order your kitchen as they are not normally used as standard. If it is within your budget requesting moisture resistant board for the wet areas in your kitchen would be a good investment. At the end of the day, all wood-based products should be properly edged and sealed before installation to improve their longevity.

So, why is board quality so important? Poor quality boards have poor mechanical properties and performance characteristics. These characteristics relate to how well the board is manufactured and here is where the strength of the bond between the wood particles becomes important. If these properties are low, it can result in issues such as rough edges and chipping when

the board is cut. It can also cause weak screw holding, meaning the screw holding a hinge in place can be easily pulled out of the board with minimal force. Good quality boards are produced in factories that have process controls in place. These controls allow for the testing of the board to ensure their performance meets the required standards. Boards with strong, well-known brand names as well as board from Europe imported via a reputable source tend to be a safe bet.

Even for the more trained eye, sometimes distinguishing good quality board from poor quality board can be diffi cult. The quality often only becomes noticeable while the board is being cut or machined. To ensure you are receiving good quality board ask for specifi c brands by name or board that is supplied by a reputable manufacturer where there is recourse should there be a quality problem. Also, try and choose colours and fi nishes that are exclusive to reputable board manufacturers. This will help ensure the product is not substituted with poor quality board. Most importantly, choose a reputable kitchen manufacturer and installer. Even the highest quality board will fail if it is not handled and installed with knowledge and care.

With thanks to the following KSA members for their help with this article:

20


22

DO celebrate the natural beauty of timber.

Timber is a beautiful, natural product and should be appreciated for the grains, knots and colour variations that refl ect the journey the tree has taken.

DON’T expect consistency of pattern, grain and colour.

Each piece of timber is unique and will have variegations to its pattern and colour. This is increased when the timber comes from two different trees, even if they are of the same species. When a whole kitchen is made from timber it will be impossible to have each door and drawer-front matching the one next to it. There will be differences in pattern and colour and in some you will see the knots in the wood.

DO feel free to combine with other finishes.

Timber is very adaptable and works beautifully when combined with other complimentary fi nishes like a neutral coloured duco, wrap or laminate. By combining these materials you get the warmth of the timber but the delicacy of the plain colour. It also increases the sense of space and stops the darker or more patterned timbers from overwhelming the space. Timber kitchen units also work well when combined with granite, engineered stone or solid surfacing. The warmth of the timber contrasts well

with the hard surface materials, just make sure the colours selected are complimentary to one another.

DON’T expose to moisture and excessive light

Treat your timber well. Excessive exposure to moisture or heat can damage the timber causing it to age or warp. Ensure you clean as per the manufacturer’s instructions to avoid damage.

DO add a little more to your budget

Timber is a natural resource and many of the more beautiful types are becoming harder and harder to get. Many types of timber are no longer readily available on the South African market unless you are prepared to pay a high price. Solid timber will be more costly than veneer. As such veneer has become a more popular option for the kitchen and it allows one piece of timber to go a lot further.

THE DO’S AND DON’TS OF TIMBER


What many people do is a combination where the frame of the door or drawer is solid timber and the inner is veneer. Either way, if you are opting for timber, allow a little extra onto your budget for the privilege of having a beautiful natural resource in your kitchen.

DON’T expect new or replacement product to match

If you have a damaged door or if a door needs to be replaced during the installation period, do not expect a close match. The new door will come from a different batch of timber and will have a greater chance of a variance in colour and grain. The new door will also be lighter that those already in place. This is because timber darkens when exposed to sunlight and the chemicals, oils, grease, etc. in a kitchen. The chances of a poor match are even greater if you have stained the timber. Each piece of timber absorbs stain in different ways and to different degrees. Once the initial batch of timber has been stained you will never get the same effect from a second batch.

DO get work done by an expert

Working with timber is very specialised. In order to ensure the longevity of your kitchen and the best quality timber or veneer, ensure your kitchen manufacturer is well experienced in making their own timber doors or is having them supplied from a reputable source. With many professional manufacturers you can select your pieces of timber with their help. You can also pay a little more and with a little added time they can match the pieces of timber to one another to get the closest match of colour and grain possible from the timber selected.

DON’T expect a timber top to be the same as a stone top

If you have opted to have timber counter tops remember that although they take the same

amount of time to template, manufacture and install as stone they are very different. Timber tops are diffi cult to install and should only be installed by an industry expert. If installed incorrectly they can warp and crack. Timber tops can be sealed or left raw. If sealed, fi ne scratch

marks can appear in the sealant. This is normal and the scratches can be made less visible through the application of a wax based product. If left raw the tops basically become a large butcher’s block and should be allowed to show the marks of day to day cooking and cleaning.

DO ensure you are fully aware of the facts

Before ordering a timber or veneer kitchen ensure you are fully aware of what to expect. Most of the complaints linked to timber kitchens we receive at the KSA are because the client has not fully understood the special features of timber and what happens to it during the manufacturing process.

DON’T be scared Don’t be scared to bring timber into your

kitchen. Although it has a lot of specialised features it will bring a sense of elegance and warmth into your home like no other material. If used respectfully in a well-designed setting it will enhance the value of your home and never date.

24

25


The Kitchen Specialists Association was started twenty six years ago by members of the kitchen industry in an attempt to instill accountability, ethics, recourse and training into an industry with no regulation and minimal formal training.

The KSA has grown to be a national body with offi ces in Gauteng, KZN and Cape Town. To further grow and strengthen the association as a national body we made the decision in 2014 to appoint a national manager to steer the KSA and its team on a day to day basis. Stephanie Forbes has taken up this position and we look forward to her leading the KSA to new heights in 2015.

The KSA has two important roles and responsibilities. One, is as an industry association. As such, it aims to foster networking and communication between the various players in the kitchen industry. It also seeks to keep the industry updated and trained. The second is as a consumer body by offering free recourse through mediation as well as advice and guidance to consumers.

There are three key stakeholders in the KSA. The kitchen manufacturer, the industry supplier and the consumer, and all their needs are interlinked. By catering to the needs of the consumer for recourse and ethics we directly uplift both the supplier and the manufacturer and by training and instilling good communication within the manufacturers we ensure better workmanship for the consumer and fewer problems for the suppliers.

Being a KSA member is optional. Members choose to apply for membership which makes it all the more relevant to consumers. The fact that a company has volunteered to be held accountable by an objective third party that offers free recourse and mediation, speaks volumes about the nature of the company. As a consumer this is an immediate indication that the company stands for something and is worthy of your business.

From a consumer perspective, opting to appoint a KSA member is the only way to put a safety net

in place to afford some protection in the costly process of installing a kitchen. When shopping for a new kitchen and tossing up between two companies would you not want to ensure you are handing your large deposit over to a company that is in good standing in the industry, who has had reference and background checks done on them and who is offering free mediation in the unlikely case of a dispute. By using a KSA member you are also complying with the Consumer Protection Act which stipulates that if mediation via an industry association is available to you, you must take it before approaching the offi ce of the consumer protector. When using a KSA member you also have free access to the KSA’s holding account. This operates in much the same way as a Trust account. It can be used for any nature of payment from disputed funds to normal payments from client to member. Use of the account allows the member to be secure that the client has the funds but keeps the client in control of those funds.

Membership of the KSA is something all players in the kitchen industry should aspire to. The KSA offers companies a means to give back to their industry, a forum to address the issues that restrict and plague their businesses, a strong marketing tool and a mark of credibility. With consumers becoming more aware of their rights, they are starting to demand recourse and accountability and the KSA can ensure companies can offer both.

It has been an honour for us to be instrumental in the KSA’s growth and development. The past two years has seen the KSA grow in industry signifi cance and become of real tangible value to the consumer and we believe this will only continue.

KSA National Committee

A WORD FROM THE KSA NATIONAL COMMITTEE

28

®

P R E M I E R Q U A R T Z S U R F A C E S

LIFE

TIME WARRANTY

LIFETIME WARRAN

TY

Gauteng Polokwane Nelspruit Cape Town Durban George Port Elizabeth Bloemfontein

w w w . p r o q u a r t z . c o . z a

Available countrywide:

M E M B E R


At Southern Kitchens we pride ourselves in combining good design with functionality, producing a finished product that adds value to your home.

We design and build a variety of kitchen styles, including Country, Modern and Classic, all finished with an impressive variety of materials.

Our commitment to our clients is to use only the finest quality materials and modern machinery.

M E M B E R

SOUTHERN KITCHENS. THE EXPERTS FOR YOUR HOME.

WE DO:KITCHENSBATHROOMSVANITIESSTUDIESCUTTING & EDGINGPVC WRAPSDUCO DOORS

CALL: 031 705 3888/9 or EMAIL: [email protected] a FREE QUOTE. Visit us at 16 Progress Road, New Germany

30


31Return to Contents Page

31

At the KSA we hear so many horror stories of people being left in the lurch by kitchen companies that are not registered with the KSA. Because of this we decided to implement a new pay-for service of site inspections on kitchen installations done by non-KSA members. Mr.X (we have opted not to divulge his real name) was just such a consumer. We asked him to share his story with you.

KITCHEN SPECIALISTS ASSOCIATION AUGUST 2014

ATT: National Manager

Dear StephaniePart of our planned home renovation in 2013 was a new kitchen. What

should

have been one of the more pleasant experiences of a renovation soon turned into a

bit of a nightmare that dragged on for more than a year.

I won’t bore you with the details of the poor workmanship and work ethic of

the company, but we ended having to seek out protection under the Consumer

Protection Act (CPA).

We thought we had done our homework by having three suppliers draw up

designs, in the same price range. When we had decided on a preferred supplier we

didn’t just accept their nice showroom and business record, we also did a Google

search for negative comments before we committed.

The kitchen company in question charged us with breach of contract when we

refused to pay the fi nal 10% payment. This, because of a very long snag list still

existing after eight months of them working on the kitchen.

It was at this point that we approached the offi ce of the Consume Protector.

Apart from the obvious problems there were a few other nasty surprises in store

for us, most of which were only brought to our attention after we decided to get

a second opinion from the KSA with their new ‘non-member site inspection’ service.

Many of the mistakes and corner-cutting that the kitchen company had made

were ones we, as consumers, would never have seen or known to look for and

not only affected the aesthetic of the kitchen but the structural integrity and

longevity of it too.Despite the KSA’s report which stated that the cost to bring t

he kitchen up

to an acceptable standard would be over R40 000.00 the Consumer Protectors

offi ce were only able to get the kitchen company to drop the fi nal payment of

around R9000.00. It was a shock to us that the Offi ce of the Consumer Protector

could only act as a mediator and did not have any power to demand fi nancial

compensation from the kitchen company.

We now realise that had we selected a KSA member we would have had

more backup (from the KSA) than we received from the Offi ce of the Consumer

Protector as their members volunteer to be registered and agree to abide by any

ruling handed down by the KSA or risk suspension or even expulsion which is

listed on their web site. Had we appointed a KSA member to do the work their

mediation service and assistance would have been free of charge and I would

have had access to their holding account facilities for my payments.

I don’t want to make the mistake of saying that there are not many good

suppliers out there, but unless they come highly recommended by people you trust, I

would recommend you rather choose the more intelligent option. It will be cheaper

in the end and you are likely to end up with a good quality product and less risk

of it turning out like ours and being R30 000.00 out of pocket.

SincerelyMister X

MY NIGHTMARE USING A NON-KSA MEMBER

32

HANDLES

KNOBS

SINKS

MIXERS

HINGES

SCREWS

SPECIALIST

FITTINGS

Fittings for the Kitchen & Furniture Industries.

DM

D 1

3108

TEL: 086 111 7626www.roco.co.za


34


Colombini Casa is Italian design at an accessible price, the ideal choice for home furnishing. Quality, versatility and originality are the essential characteristics of our modular system. Unlimi-ted combination possibilities that will answer your every need for space and style. ColombiniCasa chooses innovative materials and colors, a variety of decorative elements that make your living space a unique one. Design and transport guaranteed and professional assembly.

Colombini Casa - Johannesburg435 Jan Smuts Ave, Blairgowrie2024 Johannesburg , R.S.A. - Tel: +27 11 [email protected]

D E S I G NITALIANO

Master bedrooms - kids rooms - modern and classic kitchens - living rooms - offices - contracts and mini-apartments.

Italian design, designed for you.

36

If you are planning a new kitchen during 2015/16 you will need to look at the trends seen at the Eurocucina 2014. South Africa usually follows a year or so behind the trends coming out of Europe meaning that by the time you are ready for your kitchen the trends seen at the 2014 Eurocucina faire in Milan will be the talk of the town. By knowing the latest European trends you will ensure your new kitchen is elegant and on-trend.

Eurocucina 2014 showcased a move away from the ultra-modern kitchen. Designs had a new maturity and sensibility aimed at fulfi lling the practical needs of the consumer. Linea design was very prominent. This way of designing, where the bulk of the cabinetry is built up against one wall often with a kitchen island parallel to the main cabinets, has developed to accommodate open plan living. It is perfect for both small and large spaces. The use of linear design creates clean lines and a sense of simplicity that works for both a modern or traditional aesthetics.

High gloss surfaces are very popular at the moment. The move

away from this was perhaps one of the most drastic shifts seen at the show. The kitchens displayed focused on the juxtaposition

of a variety of textures with designers moving away from the refl ective,

polished look of a high gloss kitchen to a more sophisticated mix of textures. Matte fi nishes dominated the show with edited use of refl ective

surfaces. Steel, glass, laminates, natural stone and quartz surfaces, porcelain and timber were displayed as the preferred materials with various effects applied to each element. The combining of textures helped to create ‘living’ spaces, aimed at encouraging interaction and practicality in the kitchen.

By mixing materials the new designs created a dynamic layering of textures. Combinations of concrete, metals, glass, wood, laminates, quartz and marble, with a clear focus on natural-looking products were showcased. Timber veneers, stone fi nishes, ceramic surfaces and metallic patterning were prominent. The incorporation of natural elements into the design is in line with the rising awareness of sustainability. This was echoed by the inclusion of green spaces in the kitchen with potted herb and fl ower ‘gardens’.

Eurocucina exhibitors ramped up their inclusion of innovative technologies. The focus on space saving saw mini-bars emerging automatically from kitchen counter-tops, automated cupboard doors hiding and revealing cabinet contents, and kitchen counter-tops moving horizontally and vertically to cater for real-time solutions to easy dining and hiding away the less attractive kitchen elements. This applied to appliances as well with extractor fans that emergence from counter-tops at the press of a button.

PLANNING A KITCHEN. WHAT TO EXPECT.


One thing that has not changed is the inclusion of a dining table in the kitchen, either freestanding or as part of the kitchen counter-top. Many designs incorporated a conjoined dining space attached to the main kitchen island, allowing the kitchen to become the fi rm hub of hospitality in the home. With South Africans being notorious for their love of family, friends and good food, this trend is very suited to our lifestyle. The continuation of this design trend shows that open plan living and the kitchen as a central living area is here to stay. Some designs went even further with the interlinking of the kitchen and living space through the addition of couches and televisions to the kitchen area.

Lighting in the kitchen played a vital design roll. The popular lighting trend was low-hanging lights suspended over the island space, however, more and more designers opted for fl oor-level lighting on the kickboards and continued to use LED strips beneath high level cabinets and at on the inner corners of open shelving. A new trend that stood out was LED lighting appearing within drawers, switching on automatically when the drawer was opened.

Cabinets were mostly free of traditional handles and showcased the popular push-touch technology and fi nger grip ‘handles’. Although we have seen this trend already in South Africa we are going to see the trend grow in popularity. Combined with linear design, handleless cabinets add to the clean and simple lines. A lack of handles allowed focus to fall squarely on the cabinet cladding material and the layout of the kitchen.

The design trend with counter-tops was to keep then exceptionally slim, adding to a clean, sophisticated look. Some designers opted for a reverse bevel, cutting away the original surface thickness to create the illusion of a super-thin top.

Improved technologies in cabinet construction showed thinner cabinet doors, which beautifully matched the thinner surfaces. Some designers created visual interest by combining chunkier surface materials with the thin, porcelain, timber, marble or engineered stone tops.

The new trends showed the disappearance of the glossy bright colours. These were replaced with mostly dark, monochromatic tones. Dark and light timber tones were popular giving the kitchens a more masculine overtone. In some cases one or two primary colours were used as interest points. The best designs incorporated a combination of textures in the same tones.

There is much to look forward to as these trends fi lter down to South Africa. Be inspired by these design trends but ensure when you are ready that you opt to deal with a professional company that can afford you the protection and professionalism you deserve. If you are aware of the trends in the industry and put in place the parameters to protect both yourself and your investment the journey to having your dream kitchen part of your home should be an easy and relatively stress-free one.

Thanks to Caesarstone for their help with this article.

38


www.kitchenstudio.com [email protected]

Midrand324 Old Pretoria Road

Halfway HouseTel : 011 312 4060

Sandton / Randburg20 Rhodes Street

Tel : 011 781 4888

Durban1322 South Coast Road

MobeniTel : 031 462 7722

UmhlangaUrban Park Hotel60 Meridian DriveTel : 0860 788346

PinetownCnr.Old Main Rd

& St John’ venueTel : 031 709 6263

BallitoBallito Bay Mall

Tel : 032 586 1470

MargateCnr. Harcourt Rd / National Rd

Tel : 039 317 3732

Ghana34 Spintex Rd, Accra

Tel: +233 240 327 582

As

Cape Town2 Highway Park, Northgate Estate

Tel : 021 510 8130

40

Budgeting and planning are the fundamental basics to consider before embarking on a kitchen renovation. Working with a budget is like giving children rules and guidelines – it allows for security and gives clear direction. Your designer is there to be guided by you in order to ultimately deliver a fi nished product that is pleasing to both you and your pocket. It is unfair to have the expectation that they are going to deliver the desired result if they do not know what they have to work with. Establishing these boundaries allows for peace of mind, as well as avoiding disappointment.

Your designer is key in helping you achieve your end project within your budget. Each choice you make will have an effect on your budget. Once your designer knows exactly what you want to spend, they can set about selecting and advising you on the different options available and their impact on your budget.

It is possible to manufacture a kitchen with a particular look and feel for a variety of different prices. The fi nal cost will be dictated by your choice of materials, what hardware you opt for and how your kitchen is designed. This is where it is really important that your designer works cleverly and endeavours to give you the best quality products available within your budget. When you bring a photograph of a kitchen to the designer to show them what you like they can either replicate that product as is in more costly fi nishes like high gloss duco and veneer or they can copy the look and feel in wrap or even melamine.

It is also important to note that the more drawers and cupboard doors you have the more your kitchen will cost. By reducing the number or drawers and opting for 1200 sized cupboard units with two 600 doors instead of a variety of 300 and 450 doors the cost of the kitchen can be drastically reduced. This is because the more drawers and smaller cupboard doors the more material and hardware is used.

We so often hear consumers say that a particular company is too expensive but the truth is that the consumer has given them no idea of how much they are prepared to spend so the

company has quoted on the best materials in their range maximising storage and using life-time guarantee hardware. If the consumer had given then an idea of their budget the company would have been able to come back with a proposal suitable to that budget.

A helpful hint would be to give the designer some budget parameters. For example, that they have between R75 000 and R100 000 to play with. Ask them to do you a quote using all the bells and whistles your budget will allow and another being more conservative. You can then compare the two and pull out those special extras in the more expensive quote that you like and come to a comfortable compromise between the two.

To conclude we suggest you do three things before you meet with your kitchen designer. Firstly, have an idea of what you want look and feel wise. Collect some pictures to help the designer understand your aesthetical preferences. Secondly, have a brief. Why are you doing this revamp, to add value to the property for resale or to make a warm family space? In the brief you should note any objectives you have like maximising storage space or opening up a dark corner of your home. Also, make note of any ‘must haves’ like stone tops or a pull out pantry. This all helps show your designer how to allocate your funds. Finally and most importantly empower your designer to do the best job they can for you by giving them your budget. It will not only save time but also put you and the designer on the right foot to see the job to completion.

WHY GIVE YOUR KITCHEN DESIGNER A BUDGET


es needs esign.

13 millimetres - that‘s all it needs for perfect design.

The ideal form is simple and clear:Vionaro – the slim-lineclassic design of tomorrow.

Beauty, love of detail, precision of movement and perfect industrial manu-

facturing – virtually no other movement system achieves such a harmonious

combination of rational and emotional aspects like Vionaro. The sleek drawer

sides provide a clear design statement. The new drawer system from GRASS

features a sturdy front connection, stepless horizontal and vertical adjustment

plus tilt angle adjustment integrated in the drawer sides. www.grass.co.za

GRASS ZA (PTY) LTD. 2 Graph Avenue Montague GardensCape Town, South AfricaT +27 (0) 215 298 040 F +27 (0) 215 298 [email protected]

VIONARO

The new cubist design system combines the track-proven concealed slide system Dynapro with perfected design in an extremely slim-line form.

42

KSA Members and Suppliers by Region PLEASE NOTE: This list was accurate at the time of going to print. Please confirm all memberships on the KSA web site - www.ksa.co.za

GAUTENG - REGIONAL KITCHEN MEMBERSBayberry Kitchens (082) 579 7956 www.bayberry.co.za

Creative Shop (011) 872 1510 www.creativeshop.co.za

Cupboard Craft (016) 428 4970 www.cupboardcraft.co.za

Cupboard Hardware Centre Ferndale (011) 792 0093 www.cupboardhardwarecentre.co.za

Cupboard Value PTA (012) 327 2657 www.cupboardvaluepta.co.za

Curves & Bevels Designer Kitchens (011) 476 1526/9 www.curvesandbevels.co.za

Designer Kitchens (012) 803 4789 www.designerkitchenspretoria.co.za

Diva Cucine (011) 787 1999 www.divacucine.co.za

Easylife Kitchens – Management (011) 792 9047/8/9 www.easylifekitchens.co.za

Eazy Way Kitchens & Boards Midrand (011) 315 2373 www.eazywaykitchens.co.za

Eurofit Kitchens (011) 022 8005/6/7 www.eurofit.co.za

Exclusive Finishes (011) 894 6708 www.exclusivefinishes.co.za

Fineline Mirror Doors (011) 477 5408 www.finelinemir.co.za

Fit Out Kitchens (013) 656 2236 www.fitoutkitchens.co.za

Galloway Woodworks Enterprises (011) 979 3187 www.gallowaywoodworks.co.za

Gomes Design - Kitchens / Bathrooms / Bedrooms (011) 888 7287 www.gomesdesign.co.za

Home Concept – East Rand (011) 397 5599 www.homeconcept.co.za Home Concept – Pretoria (012) 333 0364/9 www.homeconcept.co.za Home Concept – West Rand (082) 230 0465 www.homeconcept.co.za

Kitchen and Bedroom Gallery (012) 666 8555 www.kbg.co.za

M & R Kitchens cc (012) 668 1665 www.mrkitchens.co.za

Martin Meyer Kitchens cc (083) 236 8638 www.martinmeyerkitchens.co.za

Mirror - Robe (011) 493 6326 www.mirrorobe.co.za

Niché Kitchens (011) 794 4755 www.nichekitchens.co.za

Optima Kitchens cc (011) 792 1216 www.optimakitchens.co.za

Palmin Kitchens (012) 666 8705 www.palmin.co.za

ProReno (Pty) Ltd (079) 875 6655 www.proreno.co.za

Retha’s Kitchens (012) 543 2148 www.rethaskitchens.co.za

Risely Kitchens (011) 807 5007 www.risely.co.za

blu_line (086) 054 8464 | www.blu-line.co.zablu_line focuses on offering high-end kitchens. As leaders in their field, they ensure that all the functional demands of modern living are met. Seeing the kitchen as a living space, they emphasise relational interaction, ergonomics and overall functionality. Visit their showroom to experience the latest in modern kitchen design.

Easylife Kitchens0861 327 95433 / 0861 EASYLIFE | www.easylifekitchens.co.zaEasylife Kitchens manufacture a large range of quality kitchens designed with practicality and integrity to suit your individual lifestyle. We have 30 showrooms nationwide. The exacting standard of our factory made product combined with personal service delivered by each of our owner-run stores, ensures constant quality and unique design.

GAUTENG BRANCHES: Alberton/JHB South 011 680 6184, Boksburg 011 823 1619, Brooklyn 012 346 0951, Centurion 012 653 1318, Edenvale 011 453 8475, Faerie Glen 012 991 4819, Fourways 011 467 1201, Illovo 011 268 6420, Kyalami 011 022 6000, Morningside 011 262 5896, Randburg 011 791 6810, Ruimsig 011 958 1526, Vanderbijlpark 016 981 0045, Zambesi 012 940 8470

43

River Woods Kitchens & Wine Cellars (011) 887 7139 www.riverwoods.co.za

Sariga Designer Kitchens (011) 658 1222 www.sariga.co.za

Simons Kitchens (011) 954 6042 www.simonskitchens.co.za

Show Cupboards (011) 624 2537 www.showcupboards.co.za

Slavin & Co (011) 786 2032 www.slavinandcompany.com

Sterlings Cucine – Faerie Glen (012) 998 6713 www.sterlings.co.zaSterlings Cucine – Fourways (011) 467 7525 www.sterlings.co.za

The Cupboard People – Rivonia (011) 234 0514 www.cupboardpeople.co.za The Cupboard People – Robertsham (011) 433 3534 www.cupboardpeople.co.za

Totem Kitchens (011) 472 4790 www.totemdesigns.co.za

GAUTENG - REGIONAL SUPPLIERSAustro Woodworking Machines & Tools (011) 222 8300 www.austro.co.za

BSH Home Appliances (011) 265 7800 www.bsh-group.co.za

Davidson’s Boards (012) 803 6410 www.davidsonsboards.co.za

Defy Appliances Limited (011) 621 0200 www.defy.co.za

Devin Cabinet Doors cc (011) 279 3500 www.devindoors.co.za

Dezign-A-Door (011) 664 7780 www.dezignadoor.co.za

DK Gas Appliances (011) 492 3646 www.totai.co.za

EZ Waste (012) 347 5551 www.ezwaste.co.za

Franci Fittings (011) 453 8877 www.francifittings.co.za

Frasa Kitchen Equipment SA (Pty) Ltd (076) 652 2564 www.frasa.co.za

GRASS ZA (Pty) Ltd (011) 801 9500 www.grass.co.za

Inscon Risk Services (011) 799 6400 www.inscon.co.za

M & N Fittings (Pty) Ltd (011) 435 1115 www.mnnfittings.co.za

REM (012) 643 0515 www.rem-sa.co.za

Seno SA (011) 392 1655 www.senosa.com

Upper Edge Products cc (011) 865 2913 www.upperedge.co.za

Wood @ Ease (012) 802 1471 www.woodatease.co.za

GAUTENG - STONE FABRICATORSRSA Stone Art (012) 324 7222 www.rsastoneart.co.za

Stonetech (011) 310 3717 www.stonetech.co.za

The Kitchen Studio(011) 312 4060 | www.kitchenstudio.comEstablished in 1994, The Kitchen Studio is widely regarded as one of SA’s leading designers and manufacturers of customised kitchen and bedroom furniture. Our focus is to continuously improve our production and quality by embracing the latest technology whilst maintaining innovative kitchen design.

GAUTENG & AFRICA BRANCHES: Midrand 011 312 4060, Sandton / Randburg 011 781 4888, Accra (Ghana) +233 240 327 582

44

KWA-ZULU NATAL - REGIONAL KITCHEN MEMBERS

Amazing Interiors / KN Contracts (031) 791 0308 [email protected]

AR Cupboards (031) 5061035 www.arcupboards.co.za

Ashcraft Interiors (031) 577 6878 www.ashcraftinteriors.co.za

Built In Cupboard Centre (033) 345 3600 www.bicc.co.za

Coles Kitchens – Amanzimtoti (031) 903 6413 www.coles.co.zaColes Kitchens – South Coast (039) 312 0650 www.coles.co.za

Crestwood Kitchens (031) 765 4260 www.crestwoodkitchens.co.za

Cupboard Value – Amanzimtoti (076) 145 4948 www.cupboardvalue.co.zaCupboard Value – Ballito (032) 946 3116 www.cupboardvalue.co.zaCupboard Value – Durban (031) 306 4289 www.cupboardvalue.co.zaCupboard Value – South Coast (076) 145 4948 www.cupboardvalue.co.zaCupboard Value – Umbilo (082) 787 5643 www.cupboardvalue.co.za

Exotic Kitchens (071) 885 8208 www.exotickitchens.co.za

Expert Kitchens (031) 500 8648

Home Concept – Factory (031) 713 9560 www.homeconcept.co.za Home Concept – KZN (031) 569 5637 www.homeconcept.co.za

Kitchen Flair (033) 387 1310 www.kitchenflair.co.za

Kitchen Pro KZN (031) 569 2046 www.kitchenpro.co.za

Kitchen Spectrum – Chatsworth (031) 462 7722 [email protected] Kitchen Spectrum – Park Rynie (039) 978 1554 [email protected] Kitchen Spectrum – Umhlanga (031) 462 7722 [email protected]

Milestone Kitchens (076) 949 5745 www.milestonekitchens

Regent Cupboards (083) 753 1048 www.regentcupboards.co.za

Sherwell Cupboards (082) 926 0139 www.sherwell.co.za

Southern Kitchens – Ballito (032) 946 2597 www.southernkitchens.co.zaSouthern Kitchens – Pinetown (031) 705 3888 www.southernkitchens.co.za

Woodtrends – Durban (031) 368 7755 www.woodtrends.co.za

Zululand Kitchens (035) 787 2256 [email protected]

KWA-ZULU NATAL - REGIONAL SUPPLIERSClippa Systems (033) 3453600 www.bicc.co.za

Defy Appliances Limited (031) 268 3300 www.defy.co.za

Gelmar (Pty) Ltd (031) 573 2490 www.gelmar.co.za

Afrormosia (031) 765 4986 | www.afrormosia.co.zaOur business is to design, craft and fit: We work with a variety of timbers and finishes depending on individual requirements. Our ultimate goal is to provide our customers with superior quality craftsmanship that will not only enhance our customer’s lifestyle but also add lasting value to their homes.

The Kitchen Studio0860 788 346 | www.kitchenstudio.comEstablished in 1994, The Kitchen Studio is widely regarded as one of SA’s leading designers and manufacturers of customised kitchen and bedroom furniture. Our focus is to continuously improve our production and quality by embracing the latest technology whilst maintaining innovative kitchen design.

KWA-ZULU NATAL BRANCHES: Ballito 032 586 1470, Durban 031 462 7722, Margate 039 317 3732, Pinetown 031 709 6263, Umhlanga 0860 788 346

45

KWA-ZULU NATAL - STONE FABRICATORS

South Coast Granite (084) 5801284 www.southcoastgranite.co.za

The Granite Studio (031) 462 7722 www.kitchenstudio.com

WESTERN CAPE - REGIONAL KITCHEN MEMBERSAlpine German Kitchens 021) 422 2373 www.agk.co.za

Barco Unique Cupboards/Grand Select Granite (021) 981 9393 www.barcocupboards.co.za

Cabinet Works (021) 422 3830 www.cabinetworks.co.za

Easylife Kitchens – Management (021) 951 8995 www.easylifekitchens.co.za

Espresso Design (021) 422 5283 www.espressodesign.co.za

Franco & Son Woodwork cc (021) 975 2378 www.francoandsonwoodwork.co.za

Home Concept (021) 200 5795 www.homeconcept.co.za

J.F Joos Skrynwerkers cc (021) 949 1776 www.joos.co.za

New Line Kitchens (021) 556 4138 www.newlinekitchens.co.za

Nexus Interiors (021) 982 4525 www.nexusinteriors .co.za

Quantum Leap Designs (021) 905 7221 www.quantumleapdesigns.co.za

Spotlight Kitchens (021) 762 9253 www.spotlightkitchens.co.za

The Kitchen & Cupboard Factory (021) 852 1895 www.kitchenandcupboard.co.za

Top Living Interiors (021) 914 3240 www.topliving.co.za

WESTERN CAPE - REGIONAL SUPPLIERSBSH Home Appliances (021) 550 9900 www.bsh-group.co.za

Davidsons Boards (021) 704 7060 www.davidsonsboards.co.za

Jamson Stone Corporation(031) 579 2901 | www.jamsonstone.co.zaJamson Stone Corporation are global granite merchants. We are located in Briardene, on the North coast of Kwa-Zulu Natal, and are specialists in natural and engineered stone. Our stone slabs are sourced from India, Norway, Brazil, Turkey and China. We are direct importers offering fabricators and end users great value on high quality stone.


WESTERN CAPE BRANCHES: City Bowl 021 424 2010, Kenilworth 021 762 7998, Langebaan 022 772 0303, Paarl 021 863 0566, Somerset West 021 851 2850, Stellenbosch 021 882 8948, Table View 021 554 2225, Tokai 021 713 0206, Tygervalley 021 910 4578

The Kitchen Studio(021) 510 8130 | www.kitchenstudio.comEstablished in 1994, The Kitchen Studio is widely regarded as one of SA’s leading designers and manufacturers of customised kitchen and bedroom furniture. Our focus is to continuously improve our production and quality by embracing the latest technology whilst maintaining innovative kitchen design.

De MontFort Doors (021) 593 1524 | www.demontfortdoors.co.zaDe Montfort Doors manufactures quality painted cabinet doors and kitchen accessories. Our environmentally friendly range of water based finishes offer unlimited options for every home. De MontFort

DOORS

46

Electrical Industries (021) 511 8177 www.elecind.co.za

Eurafrican (021) 511 3925 www.eurafrican.co.za

Furnspace/KDMax (021) 461 7043 www.kdmax.co.za

GRASS ZA (Pty) Ltd (021) 529 8042 www.grass.co.za

Lansdowne Boards (021) 797 8976 www.lansdowneboards.co.za

Loubser Wood Components (021) 982 4979 www.lwc.co.za

Panda Bamboo (086) 111 4971 www.pandabamboo.co.za

Superior Cabinet Doors (021) 945 2400 www.supdoor.co.za

WESTERN CAPE - STONE FABRICATORSL Cannata and Son (021) 510 8553 www.cannatagranite.com

Du Toit’s Granite (021) 982 0603 www.dutoitsgranite.co.za

Granite Projects (021) 905 3323 www.graniteprojects.co.za

Marble Gallery (021) 593 8223 www.marblegallery.co.za

Rock & Stone (021) 845 4310 www.rockandstone.co.za

The Granite Connection (021) 592 6916 www.graniteconnection.co.za

World of Marble & Granite (021) 447 6161 www.womag.co.za

OTHER REGIONS - REGIONAL KITCHEN MEMBERSHome Concept – Bloemfontein (051) 432 3007 www.homeconcept.co.zaHome Concept – East London (043) 742 3391 www.homeconcept.co.zaHome Concept – Nelspruit (013) 750 3133 www.homeconcept.co.zaHome Concept – Polokwane (015) 292 1338 www.homeconcept.co.za Home Concept – Port Elizabeth (072) 210 4798 www.homeconcept.co.za

Kountertop – Port Elizabeth (041) 366 2994 www.kountertop.co.za

Lins Kitchens – Zimbabwe +263 972 805 [email protected]

Optima Kitchens – Gaborone, Botswana +267 393 2938 www.optimakitchens.co.za

Sangengalo Marble & Granite (021) 907 1680 | www.ske.co.zaThe team at Sangengalo are dedicated to provide the very best in stone supply, refining and installation. We specialise in up-market domestic, commercial, and hotel projects.“Passionately meeting the needs of discerning clients around the corner and around the world”.


OTHER REGIONS BRANCHES: Bloemfontein 051 522 0495, East London 043 726 3428, George 044 871 5285, Polokwane 015 297 6000, Port Elizabeth 041 508 5300, Nelspruit 013 755 1495, Gaborone 00267 393 7115

Rulan Projects (Plettenberg Bay)(044) 533 6765 | www.rulanprojects.co.zaWe offer design through to installation for kitchens, bedrooms, bathrooms and all interior work, plus turnkey project management for renovation projects in Plettenberg Bay. Through a major buying group we provide a wide range of products, including all home appliance brands, at very competitive prices

47

NATIONAL SUPPLIERS

Articad – Cape Town (079) 526 0355 www.articad.co.za

Articad – Gauteng (011) 704 5400 www.articad.co.za

Articad – Kwa-Zulu Natal (082) 411 2286 www.articad.co.za

Eclipse - Furniture and Hardware Supplies – Cape Town (021) 555 2282 www.eclipsegroup.co.zaEclipse - Furniture and Hardware Supplies – Johannesburg (011) 444 8118 www.eclipsegroup.co.zaEclipse - Furniture and Hardware Supplies – Kwa-Zulu Natal (031) 579 2620 www.eclipsegroup.co.zaEclipse - Furniture and Hardware Supplies – Port Elizabeth (041) 581 0219 www.eclipsegroup.co.za

Hirsch’s – Cape Town (021) 528 6700 www.hirschs.co.zaHirsch’s – Johannesburg (012) 621 6300 www.hirschs.co.zaHirsch’s – Kwa-Zulu Natal (031) 570 4000 www.hirschs.co.za

International Slab Sales (Pty) Ltd – Cape Town (021) 511 2353 www.interslab.co.zaInternational Slab Sales (Pty) Ltd – Johannesburg (011) 822 1350 www.interslab.co.zaInternational Slab Sales (Pty) Ltd – Kwa-Zulu Natal (031) 577 2828 www.interslab.co.za

Larson Industries cc – Cape Town (021) 552 1826 www.larson.co.zaLarson Industries cc – Johannesburg (011) 795 1988 www.larson.co.zaLarson Industries cc – Kwa-Zulu Natal (031) 502 4888 www.larson.co.za

Maxima Software – Cape Town & Port Elizabeth (021) 813 5968 www.maximasoftware.co.zaMaxima Software – Jhb / Free State / Limpopo / Mpumalanga (011) 083 5968 www.maximasoftware.co.zaMaxima Software – Kwa-Zulu Natal (031) 813 5968 www.maximasoftware.co.za

National Edging – Cape Town (021) 556 1273 www.nationaledging.co.zaNational Edging – Johannesburg (011) 822 3278 www.nationaledging.co.zaNational Edging – Kwa-Zulu Natal (031) 701 3512 www.nationaledging.co.za

Niemann SA – Cape Town (076) 191 9694 www.niemannsa.co.zaNiemann SA – Johannesburg (079) 498 5277 www.niemannsa.co.zaNiemann SA – Kwa-Zulu Natal (031) 700 3961 www.niemannsa.co.za

PG Bison – Cape Town (021) 505 8900 www.pgbison.co.zaPG Bison – Johannesburg (011) 389 2000 www.pgbison.co.zaPG Bison – Kwa-Zulu Natal (031) 579 6300 www.pgbison.co.za

Compusoft South Africa (Pty) Ltd. (016) 428 4018 | www.compusoftgroup.comThe professional standard for designing kitchen and bathroom interiors. Discover our fully-integrated drawing and quotation solutions for efficient and performing kitchen design

NATIONAL BRANCHES: Johannesburg (086) 137 2653 (customer care line), Kwa-Zulu Natal (086) 137 2653 (customer care line), Cape Town & Port Elizabeth (021) 506 1480

Franke Kitchen Systems(086) 137 2653 | www.franke.co.za / [email protected] Kitchen Systems is the leading manufacturer of Stainless Steel Sinks in South Africa, in 2014 we celebrate our 100 year centenary. To complement our sinks, we offer a range of sink mixers, accessories and waste management products. In addition, we distribute ZIP Instant Boiling and Chilled Water systems.

Max on Top®0861 113 495 | www.maxontop.co.zaMax on Top® develops and supplies a range of durable decorative surface products offering architects and designers the ability to specify decors and designs suitable for a wide range of applications. Max on Top® Products include: Worktops High Pressure Laminates (HPL) Fenix NTM® Compact Laminates Advanc3 Pure Acrylic Laminate (PAL) Avonite Solid Surfacing

48

Proquartz – All Regions (012) 653 3938 www.proquartz.co.za

Rehau Polymer (Pty) Ltd – Cape Town (021) 982 1254 www.rehau.comRehau Polymer (Pty) Ltd – Eastern Cape (043) 763 1471 www.rehau.comRehau Polymer (Pty) Ltd – Johannesburg (011) 201 1300 www.rehau.comRehau Polymer (Pty) Ltd – Kwa-Zulu Natal (031) 765 7447 www.rehau.com

Renolit – All Regions (011) 396 3685 www.renolit.co.za

Salvocorp – Cape Town (021) 552 4918 www.salvocorp.co.zaSalvocorp – Johannesburg (011) 472 8899 www.salvocorp.co.zaSalvocorp – Kwa-Zulu Natal (011) 472 8899 www.salvocorp.co.za

Smeg Appliances SA – Cape Town (021) 510 0390 www.smeg.co.zaSmeg Appliances SA – Johannesburg (011) 463 1016 www.smeg.co.zaSmeg Appliances SA – Kwa-Zulu Natal (031) 566 2770 www.smeg.co.za

Sonae Novobord (Pty) Ltd – Cape Town (021) 595 0885 www.sonae.co.zaSonae Novobord (Pty) Ltd – Johannesburg (011) 236 1400 www.sonae.co.zaSonae Novobord (Pty) Ltd – Kwa-Zulu Natal (031) 266 2328 www.sonae.co.za

Technistone – Cape Town (021) 823 3717 www.stonetech.co.za/technistoneTechnistone – Johannesburg (011) 310 3717 www.stonetech.co.za/technistoneTechnistone – Kwa-Zulu Natal (031) 823 3717 www.stonetech.co.za/technistone

UCAN – Cape Town (021) 200 5795 www.ucandoit.co.zaUCAN – Johannesburg (011) 397 7639 www.ucandoit.co.zaUCAN – Kwa-Zulu Natal (031) 713 9560 www.ucandoit.co.za

Whirlpool South Africa – All Regions (086) 088 4401 www.whirlpool.co.za

Roco Fittings(0861) 11 7626 (ROCO) | www.roco.co.zaRoco is a market leader in the supply of fittings to the kitchen and furniture industries. Our range consists of chipboard screws, knockdown fittings, drawer runners, hinges, handles, knobs, worktop legs, bins, baskets, pantries, lighting, air tools, sinks and mixers. Roco prides itself on quality and service.

NATIONAL BRANCHES: Johannesburg (011) 444 9120, Centurion (012) 653 7673, Boksburg (011) 826 2872, Blackheath (021) 905 1225, Port Elizabeth (041) 365 2130, Durban (031) 569 6969, Bloemfontein (051) 448 8339

49

novolam installer’s toolkit

decorative products

novolam sample box novolam

bringing productsto life

novolam app

novolam on your pc

Documents

KSA Consumer Guide 2015