Embed Size (px)
Citation preview
l The Specialist for water and waste water measurementl Hard Rubber, Neoprene or Polyurethane liner
3l For flowrates upto 300, 000m /h and morel Meter sizes DN 25-3000 and 1"-120", fitting length also in conformity with ISO
AQUAFLUX
Electromagnetic flowmeter
the specialist for water and sewage
Modular design
separate versionwith connection box (see photo),signal converter in field housing
compact version,various signal convertersfor direct mountingon the primary head
IP 67 as standardequivalent to NEMA 6,(IP 68 on request -permanently submersible,suitable for ground burial)
Fully welded housing,absolutely tight, rugged,resistant to corrosion
3For flowrates from 10 l/h to 300, 000m /hand more
Meter sizes DN25-3000 and 1"-120",fitting length also in conformity with ISO
AQUAFLUXflowmeters measure the volumetric flowrateof electrically conductive liquids & Slurries.
Fields of application
Water and wastewater
Environmental engineering
Abrasion resistance:more than adequate for the applicationfields - Mining, Hydro Transportation, Dredging etc.
Chemical resistancealkaline solutions (e.g. NaOH)up to 50% at 20°C / 68°Facids (e.g. HNO )3up to 5% at 20°C / 68°F
AQUAFLUX
2
AQUAFLUX
The modular Krohne system
...with the Aquaflux primary head
The modular Krohne system has the right electromagnetic flowmeter foryour specific application – right from both the flowmetering and theeconomy viewpoint.
The Aquaflux primary head is compatible with allKrohne signal converters:
AquafluxCompactSystems
AquafluxSeparateSystems
3
AQUAFLUX
IFC 011 F*IFC 021 FIFC 031 FIF300F*
IFC 011 K*IFC 021 KIFC 031 K
(Full signal converter details are specified in the relevant Data Sheets)
* Please consult Krohne
Aquaflux 021 K
Aquaflux
IFC 021F
IFC 031F
Primary head
Aquaflux 031 K
Technical data
Meter sizes
Compact systems DN25 – 1600 and 1" – 64"
Separated systems DN25 – 3000 and 1"– 120"
Pipe flanges
to DIN 2501 (= BS 4504) DN25 – 50 and DN 80 / PN 40DN 65 and DN 100 – 150 / PN 16DN200 – 1000 / PN 10DN 1100 – 2000 / PN6DN2200 – 3000 / PN 2.5
to ANSI B 16.5 1" – 24" / Class 150 lb / RF rated for 20/16/10 Bar depending upon sizeto AWWA 16" – 120" / Class B or D / FF rated for 10/6 Bar depending upon size
Electrical conductivity ≥20µS/cm
Temperatures Ambient temperature Process temperature
Compact systems (Hard rubber Liner) – 25 to + 60°C – 5 to 60°C– 13 to + 140°F + 23 to 140°F
Compact systems (Polyurethene Liner) – 25 to + 60°C – 5 to + 60°C– 13 to + 140°F + 23 to + 140°F
Separate systems (Hard rubber Liner) – 25 to + 60°C – 5 to + 90°C– 13 to + 140°F + 23 to + 194°F
Separate systems (Polyurethene Liner) – 25 to + 60°C – 5 to + 80°C– 13 to + 140°F + 23 to + 175°F
Max. allowable operating data
Process temperature, operating pressure and vacuum load for the liner
Insulation class of field coils F
Electrode design
flat elliptical electrodes, solidly fitted, surface-polished
Protection category (EN 60 529 / IEC 529)
Standard IP 67, equivalent to NEMA 6
Option IP 68, equivalent to NEMA 6
Groundings rings available as an option
Materials
Measuring tube stainless steel 1.4301 (or higher materials number), equivalent to SS 304
LinerDN 50 – 3000 / 2" – 120" Neoprene / Hard rubberDN 25 – 3000 / 1" – 120" Polyurethane
ElectrodesStandard Hastelloy C4, SS 316Option Stainless steel 1.4404 / SS 316, Ti, Tantalum
Connecting flanges*
DIN: DN 25 – 3000 Carbon Steel, optionally SS 304 / SS 316ANSI 1" – 24" Carbon Steel, optionally SS 304 / SS 316
Housing*DN 25 – 3000 / 1" – 120" Mild Steel, optionally SS 304 / SS 316
Terminal box*AQUAFLUX F (separate) Die-cast aluminium / Optionally SS304/SS316
Grounding rings (optional) SS 304 or SS 316* with polyurethane coating
} Higher Pressureratings on request
4
AQUAFLUX
25 1 0.5302 1.767 21.2032 – 0.8686 2.895 34.7440 1½ 1.358 4.524 54.2850 2 2.121 7.069 84.8265 – 3.584 11.95 143.380 3 5.429 18.10 217.1100 4 8.483 28.27 339.2125 – 13.26 44.18 530.1150 6 19.09 63.62 763.4200 8 33.93 113.1 1357250 10 53.02 176.7 2120300 12 76.35 254.5 3053350 14 103.9 346.4 4156400 16 135.8 452.4 5428500 20 212.1 706.9 8482600 24 305.4 1018 12215700 28 415.6 1385 16625800 32 542.9 1810 21714900 36 662.8 2290 265101000 40 848.2 2827 339291200 48 1221 4072 488581400 56 1663 5542 665011600 64 2171 7238 868591800 72 2748 9161 1099312000 80 3393 11310 1357172200 88 4105 13685 1642172400 96 4886 16286 1954322600 104 5734 19113 2293612800 112 6650 22167 2660053000 120 7634 25447 305363
5
AQUAFLUX
DN 25 - 300 PN40, 16 10 see tableDN350 -1000 PN 10 see tableDN350 -1000 PN 2.5 see table,
dimension"a " + 200 mmstandard
³DN 1200 PN 6, 2.5 information suppliedon request
1"-24" 150 lb/ RF³300 lb/RF
see tableinformation suppliedon request
6
AQUAFLUX
25 40 (580) 1 150 (5.91) 200 (7.87) 150 (5.91) 165 (6.50) 121 (4.76) 115 (4.53) 108 (4.25) 7 (15.4) 8 (17.6)32 40 (580) – 150 (5.91) 200 (7.87) – 180 (7.09) 139 (5.47) 140 (5.51) – 8 (17.6) –40 40 (580) 1½ 150 (5.91) 200 (7.87) 150 (5.91) 180 (7.09) 139 (5.47) 150 (5.91) 127 (5.00) 8 (17.6) 9 (19.8)50 40 (580) 2 200 (7.87) 200 (7.87) 200 (7.87) 218 (8.58) 160 (6.30) 165 (6.50) 152 (6.00) 8 (17.6) (17.6)65 16 (232) – 200 (7.87) 200 (7.87) – 228 (8.98) 173 (6.81) 185 (7.28) – 10 (22) –80 40 (580) 3 200 (7.87) 200 (7.87) 200 (7.87) 235 (9.25) 173 (6.81) 200 (7.87) 191 (7.50) 12 (27) 13 (29)100 16 (232) 4 250 (9.84) 250 (9.84) 250 (9.84) 286 (11.26) 233 (9.17) 220 (8.66) 228 (8.98) 15 (33) 18 (40)*125 16 (232) – 250 (9.84) 250 (9.84) – 297 (11.69) 233 (9.17) 250 (9.84) – 19 (42) –150 16 (232) 6 300 (11.81) 300 (11.81) 300 (11.81) 327 (12.87) 257 (10.12) 285 (11.22) 279 (10.98) 22 (49) 26 (58)*200 10 (145) 8 350 (13.78) 350 (13.78) 350 (13.78) 385 (15.16) 291 (11.46) 340 (13.39) 343 (13.50) 34 (75) 42 (95)*250 10 (145) 10 400 (15.75) 450 (17.72) 400 (15.75) 437 (17.20) 331 (13.03) 395 (15.55) 406 (16.00) 48 (107) 64 (140)*300 10 (145) 12 500 (19.69) 500 (19.69) 500 (19.69) 500 (19.69) 381 (15.00) 445 (17.52) 533 (21.00) 58 (128) 94 (210)*350 10 (145) 14 500 (19.69) 550 (19.69) 700 (27.56) 548 (21.57) 428 (16.85) 505 (19.88) 597 (23.50) 78 (172) 129 (285)*400 10 (145) 16 600 (23.62) 600 (23.62) 800 (31.50) 606 (23.86) 483 (19.02) 565 (22.24) 635 (25.00) 98 (217) 165 (365)*500 10 (145) 20 600 (23.62) – 800 (31.50) 651 (25.63) 533 (20.98) 670 (26.38) 699 (27.50) 128 (362) 223 (492)*600 10 (145) 24 600 (23.62) – 800 (31.50) 820 (32.28) 585 (23.03) 780 (30.71) 813 (32.00) 164 (362) 306 (675)*700 10 (145) 28 700 (27.56) – 937 (36.89) 694 (27.32) 895 (35.24) 245 (540)800 10 (145) 32 800 (31.50) – 1058 (41.65) 922 (36.30) 1015 (39.96) 328 (724)900 10 (145) 36 900 (35.43) – 1164 (45.83) 1026 (40.39) 1115 (43.90) 425 (1000)1000 10 (145) 40 1000 (39.37) – 1278 (50.31) 1132 (44.57) 1230 (48.43) 507 (1118)
flangesto AWWA:
dimensionson request
flangesto AWWA:
dimensionson request
flangesto AWWA:
dimensionson request
* max. pressure rating acc. DIN flanges, see column "PN (psig)"
Dimension without grounding rings.
DN25 - 40 / 1" - 11/2"
Distance between primary head and signal converter
The distance is limited byconductivity of the fluidfor systems with pulsed D.C. field excitation, by the cross-sectional area of the field power cable
If more than one of these points apply, the shortest distance controls.
Precise information on the distance between primary head and signal converter, connection diagrams and length of the signal transmission cable is given in the individual signal converter specifications.
"Magnetic inductive flowmeters should be installed and wired in accordance with the information and directions given in the installation and operating instructions".
Electrical conductivity of the fluid
Measurement is independent of the conductivity of the fluid, provided it in above the limit specified for the various systems.
For most primary heads, the lower limit is 20µS/cm
7
AQUAFLUX
DN 50-300
DN 350-1000
IFC 021K/F Signal converter
IFC 021K/F Signal converter
Dimensional details of IFC 031 available on request.
Krohne Marshall Pvt. Ltd.(A Forbes Marshall Company)
A-34/35, MIDC,Industrial Estate,'H' Block, Pimpri,Pune - 411 018. India.
Tel.: 91(0)20 - 27442020Fax: 91(0)20 - 27442040E-mail: [email protected]
AQUAFLUX
All India Sales and Service NetworkHead Office: KolkataA 34/35 MIDC Estate, 5A Orient Row,H Block, Pimpri, Kolkata - 700 017Pune 411 018, India Tel : 033 - 22407359 Tel: 91-20-27442020 Fax : 033 - 22475280Fax: 91-20-27442040 Mumbai Email: [email protected] 107, Mahatma Gandhi Road,Ahmedabad Mumbai - 400 023Forbes Marshall Tel : 022 - 2267 3821 4 Shetoor Bunglows, Fax : 022 - 2267 2970Opp. Drive in Petrol Pump, Nagpur Near Chandandwar Hospital 50, 'Asha' , 2nd floor,T V Tower, Lendra Park, New Ramdaspeth,Ahmedabad - 380 054 Nagpur - 440 010Tel : 079 - 26851738 Tel : 0712 - 2539386Fax : 079 - 26854014 Telefax : 0712 - 2549851Alibag Navi MumbaiPent House No.1, "Ellora" Sector 14 / Bafna Baug Complex-B, Plot No. 45Behind Big Splash Hotel Opp. Marathe BhavanChendhare, Vashi, Alibag 404 201 Navi Mumbai - 400 705Tel : 02141 - 223795(O) Tel : 022 - 27666157 Fax : 02141 - 223796 (O) Fax: 022 - 27881533Tel : 02141 - 224699 (R)
PuneBangalore P O Box No.2921 Coles Road, Cleveland Town, Mumbai-Pune Road,Bangalore - 560 005 Kaswarwadi, Pune 411 034Tel : 080 - 25483047 Tel: 91-20-27145595Fax : 080 - 25499971 Fax: 91-20-27147413Chandigarh SuratSCO # 77, Top Floor, 7B Ground Floor, Sector 38-C, Chandigarh Navchetan Society,Tel : 0172 - 5080285 Opp. Krushimangal Hall, Fax : 0172 - 2697861 Ring Road,Chennai Surat - 395 007Plot # 59, Montieth Road, Telefax : 0261 - 2651448 Asha Mansion, Egmore VadodaraChennai - 600 008. 10, Shreeji Krupa Society, Tel : 044 - 26611238 Gotri Road,Fax : 044 - 26611236 B/H Kalpavruksha Complex,Coimbatore Subhanpura P.O.,Flat No. 4C, Vadodara - 390 023Classic Garden Apartment, Tel : 0265 - 23437331552 Trichy Road, Direct : 0265 - 2342234Coimbatore - 641 018 Fax : 0265 - 2337930Tel : 0422 - 2303679 VisakhapatanamFax : 0422 - 2300072 403, Crescent Towers,Delhi Opp. Enadu, Seethammadhara,Anupama Arcade, Visakhapatnam - 530 0132nd Floor, Tel : 0891 - 2552538Opp. Samachar Apartments, Fax: 0891 - 2535576Mayur Vihar Extn., Phase I, New Delhi - 110 091
Area RepresentaivesTel : 011 - 22713485BhopalFax: 011 - 22710484Lucknow
Hyderabad MaduraiPlot No. A-19/2 & T-4/2 PondicherryI.D.A. Nacharam, KanpurHyderabad - 500 076 TrichyTel : 91 (0) 40 - 27153918 Fax : 91 (0) 40 - 27173235
Jamshedpur59, Rajendra Nagar, Jamshedpur - 831 001,Jharkhand.Tel : 0657 - 2437721Telefax : 0657 - 2427983
USA
Forbes Marshall, Inc.P.O. Box 60670480 California Ave, Suite 102Palo Alto, CA 94306Tel: +1 650 327-4227Fax: +1 650 327-4127Toll Free Tech Support #: 1 866 803-6224Email: [email protected]
CANADA
Forbes Marshall Canada Inc.2425 Matheson Blvd. East, 8th FloorMississauga, ON L4W 5K4CanadaTel: + 905.361.2525Fax: +905 361 6401E-mail : [email protected]
COLUMBIA
CRA 58 # 167B 19 INT: 1Portales del NorteBogota ColombiaTel: + 57 316 721 15 10Email: [email protected]
INDIA
Forbes Marshall Pvt. Ltd.PO Box # 29, Mumbai-Pune Rd.,Kasarwadi, Pune 411 034Tel: 91 (0) 20-27149012/27145595Fax : 91 (0) 20-27147379Email: [email protected]
BANGLADESH
Forbes Marshall Pvt. Ltd.Rupsha Tower, C-3,3rd Floor7, Kemal Attaturk Avenue,Road#17, Behind Brac Bank,Dhaka - BangladeshTel: +88 028811501E-mail : [email protected]
SRI LANKA
Forbes Marshall Lanka Pvt Ltd12/5A, 1/1,Robert Gunawardane MawathaKirulapone,Colombo 06Tel: +94112512997Fax: + 94114511128Email: [email protected]
NEPAL
Ekta Engineering and Marketing Pvt. Ltd.GPO Box 11482KathmanduNepalTel: +977-1-4278781/4282344Fax:+977-1-4278781Email: [email protected]
THAILAND
Forbes Marshall Pvt.Ltd.Room No.403,4th FloorHouse No.567, Seri 6 Road(Soi 51, Rama 9 Road), Suan IuanBangkok 10250Tel: +66 2 3308924-6Fax: +66 2 3308927Email: [email protected]
INDONESIA
Forbes Marshall Pvt.Ltd.Blok NC 8 No.11Jalan Kelapa Lilin Raya Blok,Kelapa Gading Timur,Jakarta - UttaraIndonesiaTel: +62 8 15199 17178Email:[email protected]
International OperationsMALAYSIA
Forbes Marshall Pvt LtdSuite 1904, 19th FloorKenanga International, Jalan Sultan Ismail50250 Kuala Lumpur, MalaysiaTel: +60 32161 8260Fax: +60 32161 2220Email:[email protected]
VIETNAM
Lien Hiep UIA Company Ltd.A 12 Phan Dinh Giot St.Tan Binh Dist. HCMC, VietnamTel: +(84-8) 9970891/ 9970345Fax: +(84-8) 9970889/ 9970808Email: [email protected]
EGYPT
System TechniqueWater Management Div.17 El Mahrovky STreet, Off Aswan Square,Mohandseen, CairoP.O.Box 141 El-Gezirah,EgyptTel: + 202 3036935/ 3036952Fax: + 202 3036897Email: [email protected]
KENYA
Forbes Marshall Pvt.Ltd.PO Box 58338-00200 NairobiKenyaTel: +254-20824414-9Fax: +254-20824405/824270Email: [email protected]
ETHIOPIA
Rapture Import & Export PLC
Kolfe Keranio Sub-City,Kebele13/14,House Nr.624,P.O.Box 28447/1000Addis AbabaEthiopiaTel.:+251-911-145524Fax:+251-115-511479Email: [email protected]
UAE
Al Hamas Trading Co (LLC) (For Instrumentation)P.O.Box 19546Dubai, U.A.ETel: + 971-4-3350020Telefax: + 971-4-3356648Email: [email protected] Technical Parts Co (LLC)(For Boilers)P.O.Box 5071Dubai, U.A.E.Tel:+ 971-4-2137888Fax:+ 971-4-2823078
Email: [email protected]
IRAN
Unit 23. No.2, 18th Street,Golfam Building, Naft Street, 4 Divari, End of Ashrafi Esfehani, Pounak, Tehran, IranTel: +98 912 1304598Email: [email protected]
Azmoon Motamam Engineering and Design Co.Unit 8, No.32,2nd St. Sazman Ab St.Satarkhan Avenue, TehranIranTel: +98 21 442 516 90/442 384 27Fax:+98 21 442 219 69
