Upload
brianlaksono
View
19
Download
3
Embed Size (px)
DESCRIPTION
Untuk mengandalikanmesin listrik
Citation preview
ChoperTo rig up DC Jones chopper and to measure the value of load voltage(VLDC).2. To plot the graphs of Frequency V/S VLDC and Duty Cycle V/S VLDC.
Voltage (Impulse) commuted chopper both constant frequency and variablefrequency operations.
To construct Step down & Step up MOSFET based choppers and to draw itsoutput response.
To study single phase step up chopper.
Inveter
To rig up and verify the operation of parallel inverter using SCR.
To rig up a Series Inverter using SCR and note down the waveforms.2) To record the frequency of operation.
To realize parallel and series inverter
To study a Single-phase series inverter and parallel inverter and plot its output waveform.
To study single phase series InverterTo study single phase parallel inverter.
To study single phase step up chopper.
To study single phase step up chopper.To study single phase step up chopper.
MOSFET
To draw static characteristic of MOSFET and hence to determine the outputresistance and Trans conductance.
To plot the transfer characteristics of MOSFETTo plot the transfer characteristics of IGBT.
To construct Step down & Step up MOSFET based choppers and to draw itsoutput response.
IGBT
To plot the VI Characteristics of IGBT.To obtain Single phase output wave forms for IGBT based PWM inverter
To obtain Three phase output wave forms for IGBT based PWM inverter