KODAK Sept2009IMcatalog

Page 1

Imtech Imaging, Inc. Telephone: 585-594-1000 Fax: (585) 272-7678 www.imtechimaging.com

Medical Imaging Resources

2009 Catalog

OEM Quality Replacement Parts

Film Processors

Multiloaders

Dry Lasers

38 Saginaw Drive, Suite B, Rochester, New York 14623(585) 594-1000

www.imtechimaging.com

Page 2


With our full line of refurbished Kodak Drylasers, Multiloaders, Film Processors, and OEM Quality Replacement Parts, we are

confident that we will be recognized as a leader in the marketplace of refurbished radiology equipment and quality replacement parts.

We simply have taken the refurbishing of equipment to new heights, committed to not sacrificing quality for quanity,

you can rest assure that you and your customer will be receiving the most thoroughly refurbished radiology equipment on the market.

We hear the outcries everyday for the need for quality refurbished equipment. Our goal is to become #1 in this arena, once given the

opportunity to sell you our refurbished equipment, rest assured that you and your customer will be completely satisfied.

We look forward to doing business with you.

Imtech Imaging, Inc. has compiled the contents of this catalog to offer you the very best in Dicom Networking and Laser Training,

Refurbished Equipment, and OEM Quality Replacement Parts.

Imtech Imaging, Inc.Medical Imaging Resources

Page 3


Table of Contents1. Helpful Information 4

2. Part Orders and Warranty 5

3. Equipment Warranty 6

4. Recycling Program 7

5. Dryview Image Laser Equipment: Parts and Training 8

6. Dryview 8700 Image Laser and Parts 9-12

7. Dryview 8300 Image Laser and Parts 13

8. Dryview 8100 Image Laser and Parts 14

9. Dryview 8610 Image Laser 15

10. Dryview 8900 Image Laser 15-16

11. MIM 9410 and MIM 200 17

12. M6B 90 Second Film Processor 18-20

13. M35A / AM 120 Second Film Processor 21-22

14. MIN-R Mammography Film Processor 23-24

15. Refurbished Rapid Access Processors 25

16. Bright Spot Illuminator - Model 188 25

17. Refurbished Miniloader 7000 Film Processor 26

18. Refurbished Multiloader 2000P Film Processor 26

20. Multiloader 700 Plus Daylight System 27-28

21. Multiloader 300 Plus Daylight System 29-30

22. X-Ray Cassettes, Screens, Grids, ID Cameras 31-32

23. Film Shredder 33

24. Parts - M6B 34-38

25. Parts - M35 39-41

26. Parts - Min-R 42-44

27. Parts - 5000 45-48

28. Parts - 3000 49-52

29 Parts - 2000 53-55

30. Parts - 270 56-59

31. Parts - 180 60-63

32. Part - Pumps and Motors 64

Page 4


1. Contact us by telephone at (585) 594-1000, Fax: (585) 272-7678, or visit our us on-line at www.imtechimaging.com.

2.3. Business hours are Monday through Friday 8:30 a.m. to 5:30 p.m. EST.

4. All list prices are set by the OEM, and are subject to change without notice.

5. Call for dealers net pricing.

67. All parts prefixed with (RC) are a reconditioned part or may contain reconditoned parts.

8. Part numbers with an (*) have been issued a new number that will follow the original OEM number and should be used to order that part.

9. All parts are shipped UPS and Federal Express, in most cases the same day or as directed otherwise.

10. Imtech Imaging, Inc. is confident that this catalog is the beginning of a long and healthy business relationship.

As we continue to grow, so will the contents of this catalog with amendments that will be sent to you. By all means if you do not see what

you are looking for, please contact us with your needs and give us the opportunity to quote you a cost affective price.

Helpful Information

Page 5


Part Orders and Warranty

OrdersOrder parts by phone at (585) 594-1000, or fax order to (585) 272-7678.

QuotesWritten part and equipment quotes are honored for 30 days from the date of quote.

PricingAll list prices are set by the OEM and subject to change without notice. There are no minimum order requirements or up charges for P1 orders. Please call for dealers net pricing.

PaymentNET 30 days from date of invoice.

ShippingAll parts are shipped UPS and Federal Express, in most cases the same day or otherwise as directed.

Parts ReturnsNo part returns after forty-five (45) days. All shipping charges on returned parts will be the responsibility of the customer. All returned parts must be accompanied by a copy of the original invoice and shipped to:

Imtech Imaging, Inc.38 Saginaw Drive, Suite BRochester, NY 14623

Parts WarrantyAll our new replacement and reconditioned parts are warrantied to perform at OEM standards for a period of three (3) months from the date of invoice.

Warranted PartsAll replaced warranted part(s) will have a return authorization form and number assigned, both the war-ranted part(s) and form will have to be returned to Imtech Imaging, Inc.

Non-Returned Warranted PartsReturn authorization forms and faulty part(s) that have been warranted and not returned to Imtech Imaging, Inc., within thirty (30) days will be invoiced to the dealer.

Page 6


Equipment Warranty

Imtech Imaging’s warranty and reputation go hand in hand, offering you and your customers peace of mind in purchasing decisions.

Our refurbished Dry Lasers, MIMS, and associated products are sold with a Six Month Limited Parts Warranty. Our refurbished Multiloaders and Film Processors include a One Year Limited Parts Warranty.

The equipment warranty covers the no cost replacement of faulty part(s) only, it does not include the labor required to replace that part(s).

Returning Replaced Warranted Parts

All replaced warranted part(s) will have a return au-thorization form and number assigned, both the war-ranted part(s) and form will have to be returned with the equipment serial number, location, and company name.

Non-Returned Warranted Parts

Authorization forms and faulty part(s) that have been warranted and not returned to Imtech Imaging, Inc. within thirty (30) days will be invoiced to the dealer.

Incorrect installation (voltages and ventilation, etc.);

Changes in voltages (electrical storms and ups’s, etc.);

Typical wear on moving parts;

Improper maintenance (Dry Lasers);

Improper monthly maintenance (Film Proceesor);

Replaced Warranted Parts.

The following are EXCLUDED from the WARRANTY:

Page 7


Recycling Program

Imtech Imaging, Inc. is interested in purchasing used equip-ment, parts, and part assemblies, as listed below:

EQUIPMENT: KODAK Dry LasersKODAK ProcessorsKODAK MultiloadersKODAK MIMSKODAK Key PadsKODAK CR UnitsFUJI CR UnitsOREX CR UnitsKONICA CR UnitsAGFA CR Units

PRINTED CIRCUIT BOARDS: Dry Laser PCB

M6B PCB’s 10K + Above5000 PCB3000 PCB480-460 PCBM35 PCBAccumulator PCB

RACK ASSEMBLIES,MOTORS and DRIVES: From Most Kodak Processors

DRY LASER DRUMS: KODAK 8900KODAK 8700KODAK 8300KODAK 8100

Credit Program

Customers have the option to receive credit for merchandise put toward the purchasse of equipment and parts.

If you have a large list of equipment and parts, please fax it to (585) 594-1000 along with the equipment serial numbers, your telephone number, and contact person.

Page 8


Dryview Laser: Equipment, Parts and Training

Equipment and Parts

Imtech Imaging, Inc. has a multitude of dry lasers, parts, keypads, fiber optic cable, PCB’s. If you do not find the part number you are looking for, please contact us at (585) 594-1000.

Training

Imtech Imaging, Inc. offers Dicom networking fundamentals: MIMS: 25, 100, 200, and 200E. and a wide range of laser training: 8100, 8300, 8610, 8700, 8900, AGFA Drystar. Please contact us for a current schedule.

Page 9


Control Is Easy

The operator’s interfaces include two different optional remote keypads and a local panel, both display a number of options such as calibration, open supply door, print, test print, user 1, user 2, ready light, alarm light, and a main menu that displays the amount of time left before the processor is ready, film size, type, supply left, and total number of film printed.

Ease Of Use

Featuring nine different format options from 1:1 to 20:1, the 20:1 format is accommodated without compression. Processing up to a 120 films per hour and self calibrating to optimize image quality without operator intervention. The automatically opened and closed 125 sheet daylight loaded film cartridge is easily replaced by opening the front access door, remove the empty cartridge and placing the new cartridge on the cartridge guides and closing the door.

Advantages

Having 78 micron laser spot spacing, 325 dpi resolution, and 4,096 gray levels for high quality crisp edged sharpness. The DryView 8700 self calibrates for consistent contrast and density, and along with a PACS Link interface that converts data from legacy modalities to DICOM so the 8700 can receive images over a network for hardcopy viewing. Therefore, enhancing productivity.

Dryview 8700 Image Laser

The DryView 8700 Imager is a high volume 14 x 17 in. format that is designed for CT, MRI, DSA, and other applications that can be interfaced with a PACS Link for basic network print-ing with exceptional speed and diagnostic images quality all at a affordable first step towards PACS.

Page 10


Dimensions Length 32 inches. Width 26 inches. Height 50.4 inches.

Electrical Requirements:200/220/240 vac. +/- 10%

WarrantySix months parts only. See warranties for specifics.

Quality Control TestingTo ensure customer satisfaction, it is Imtech Imaging’s policy that all our refurbished equipment is tested for a minimum of 48 hours. At such time the equipment is monitored to ensure all systems and components of the equipment are functioning at OEM standards.

Exterior PanelsAll the panels are repaired and refinished in a light gray and greige industrial coating to match the OEM’s lasted color configuration, a new name plate is installed to match the original OEM appearance.

Sensing and Solenoid ComponentsAll U, Flag, and Interlock sensors, Kicker, Alignment, Door, and Gate solenoids are removed, cleaned, inspected, tested and reused or replaced with new.

Mechanical Systems - Rollback Asssembly - Pickup Assembly - Platen Module - Film Transport - Film ProcessorThe mechanical systems are disassembled, polished, refinished, rebuilt, inspected, tested, and reassembled to the main frame along with new belts, sensors, solenoids, interlocks, charcoal filter, all other filters and felts, clam shell aluminum foil, heat rollers, recoated drum assembly, drum brushes, stripper rollers assembly, etc. All are adjusted to OEM specifications and monitored at run in to assure trouble free service.

Electronic Assembly - Digital Interface - Fiber Interface - Image Processor - Memory Daughter - Machine Interface - New Modem - Power Distribution - System Control - Translator Daughter - Video Interface, etc.The electronic PCB’s are all cleaned and inspected configured to your specifications, reinstalled and tested. During power up the power supply and all test points are checked for correct operating voltages to ensure all components are set to OEM specifications.

Laser Optic SystemThe LOS is removed, cleaned, inspected and reused or replaced with a reconditioned module that has a new tested laser diode installed. The module is tested again at run in to assure proper operation.

Refurbishing and Specifications of the DryView 8700

Page 11


8700 Dry View Parts

6E7372* 8700 Drum (8E7286) 3683.68 ***

SP8E2402** 8700 Optics Module 19342.24 ***

96000003432 Stainless Steel Rollers $88.84

5574 Temp Gauge, Probe & Block $604.90

SP8E9166 Stripper Rollers (8E9166) $53.37

SP8E2644 Insulation Top $396.04

SP8E2643 Insulation Bottom $414.38

78809451293 990 Switch AY Exit $106.94

SP8E2330 Assembly Switch, Optical Flag $35.99

74050051999 Remote Keypad $7,657.26

78807741356 UKEIB $4,615.40

78807742016 DEIB $3,701.98

78807907478 EVEIB with external sync $9,068.57

78809488600 EVEIB without external sync $5,726.25

44002276739 VEIB $9,797.13

SP8E8545 8700 Power Supply $2,167.72

78807526054 Fiber Optic Cable 10’ $205.62

78806336844 Fiber Optic Cable 33’ $689.29

78807740978 Keypad Cable 10‘ $481.14

78805346976 Digital Cable 10‘ $323.07

78805341340 Digital Cable 33‘ $460.53

78805346950 Analog Cable 10‘ $107.22

78805340599 Analog Cable 33‘ $162.21

78809491323 Input Module 32MP 9Bit $13,207.92

*Note:An additional $1,000 invoice will be issued if Drum Core is not returned within 30 days

**Note:An additional $4,250 invoice will be issued if Optics Module Core is not returned within 30 days

***Note: Price is exchange

Part No. Description List

Page 12


8700PM 8700 PM Kit 10K (78-9998-2915-9) $353.71

78-8018-2802-7 Litho Pad $18.48

96-0000-0066-9 Trouble Shooter $25.06

SP96000016590 Silicone $46.21

96-0000-0118-8 Tack Cloth $4.30

22-0001-1124-9 Static Bag $2.27

34-7041-8939-7 Drum Stand $1.22

74-0401-8320-9 Spring Replacement $4.25

78-8095-9495-1 Power Mod Filter $4.46

SP8E7331 Charcoal Filter $258.19

78-8656-4001-1 E-Ring $0.27

78-9998-2868-0 Ty Wrap $1.19

8700 Dry View PM Parts

8700 Kit Needs These Extra Items

26-1012-1130-3 Krytox Lube $104.98

78-8033-7457-6 Isopropyl Alcohol $22.52

78-8005-3779-3 Lint Free Cloth $250.09

96-0000-0064-4 Stainless Cleaner $21.36

TL-5303 Insulated Rubber Gloves $8.15

8700PM-30 30K PM Includes 10K Kit Plus $642.40

96-0000-0939-7 Felt Air Barrier $106.33

SP8E9280 Air Filter $20.95

26-1011-6788-5 Metal Filter $83.78

SP74999991255 Felt Pad Assembly $56.69

74-0401-84439 Replacement Pad $27.08



Page 13


8300PM 8300PM Kit $XXXXX

78811320692 Lower Felt Pad $124.41

78809632199 Upper Felt Pad $123.77

78809632041 Charcoal Filter $331.51

78810005229 Faz Filter $103.09

1C8261 Isopropyl Alcohol $21.51

78800537793 Lint Free Cloth $250.09

TL5303 Insulated Rubber Gloves $8.15

78999828680 One Bag with Twist Tie $1.19

1C8287 Prewet Wipe 50/pk $49.10

TL96000000578 O-Cello Pad $8.26

DimensionsHeight 18 inches, Width 18 inches, Length 26 inches.

Electrical Requirements110 VAC +/- 10% 60 Hz


AdvantagesFeaturing true dry laser technology, four different format options 1:1, 2:1, 4:1 and 6:1. Producing up to 55 images per hour with 300 dpi resolution and 256 gray levels. Easy to replace 100 sheet daylight loaded film package, and automatically monitors contrast and density for superior image quality. The 8300 Dry View Imager enhances work flow and productivity.

Dryview 8300 Image LaserThe Dry View 8300 Imager is a high quality 8 x 10 inch film printer of compact design. Perfect for ultrasound, C-arm, nuclear medicine, stereotactic, and other applications. It is capable of a direct connect or interfaced to a PACS link for basic network printing with outstanding diagnostic image quality.

Dryview 8300 Parts


Page 14



Call for Availability


Electrical Requirements110/240 VAC +/- 10%, 50/60 Hz

AdvantagesFeaturing true dry laser technology, 55 films per hour, 325 dpi resolution over 4,000 gray levels, AIQC that automatically calibrates the 8100 and adjusts contrast and density to meet user preferences all without operator intervention.

Optional8100 Keypad

The Dryview 8100 Imager is a high quality 14 x 17 inch designed for low to medium volumn image facilities with the benefits of dry laser technology. Perfect for CT, MRI, and DSA. Capable of a direct connect or interface to a PACS links for basic network printing and outstanding diagnostic image quality.

8100PM 8100 PM Kit 10K (44-0022-7182-1) $483.11

78-8018-2802-7 White Non-Woven Pad $18.48

96-0000-0066-9 Trouble Shooter $25.06

SP96000016590 Silicone $46.21

96-0000-0118-8 Tack Cloth $4.30

22-0001-1124-9 Static Bag $2.27

34-7041-8939-7 Drum Stand $1.22

96-0000-0064-4 Stainless Cleaner $21.36

78-9998-2868-0 Ty Wrap $1.19

SP74040189669 Charcoal Filter Kit $355.26

74-0418-4443-9 Replacement Felt Pad $25.31

TL5303 Insulated Rubber Gloves $8.15

Dryview 8100 Parts

8100 M Parts Not in Kit

96-0000-2755-5 Front Door Air Filter $21.54

96-0000-0404-2 Processor Roller Bearings $4.54

78-8033-7457-6 Isopropyl Alcohol $22.52


Page 15


The Dry View 8610 Imager is an exclusive full field, high resolution digital mammography printer. An affordable first step toward PACS and a perfect addition to any facility where digital imaging is warranted to help meet the needs of rising demands for schedueld mammogram visits.


Electrical Requirements100-240 VAC, 50/60 Hz


AdvantagesFeaturing true dry laser technology, a built-in PACS interface capable of converting image data to DICOM and receiving DICOM image data from a network. Printing up to 40 images per hour with 655 dpi resoluion, over 4,000 gray levels, and with no operator intervention, monitors contrast and density presets for consistent film to film image quality, thus making the 8610 Imager an important part of any mammography facility.


Dimensions (includes sorter)Height: 60 inches,Width: 32 inches, Depth: 40 inches

Electrical Requirements100–240 VAC; 50/60 Hz; maximum 15 amps

WarrantySix months - partys only. See warranties for specifics

AdvantagesFeaturing true dry laser technology, along with an optional six-bin film sorter, it is a very expandable friendly laser printer that can increase work flow and productivity for you today as well as accommodate your future additional modality needs. A high speed printer capable of printing 200 film per hour on five different film sizes, up to three at a time each at 650 dpi, having over 16,000 possible gray levels, the largest printable pixel matrix on the market at 9,100 x 11,037 and the only dry imager with 100 megapixels on 14 x 17 films, the decision is easy.

Optional8900 Keypad

Dryview 8900 Image LaserThe Dryview 8900 Imager is a high volume printer capable of handling multi modality enviroments CT, DR, PACS, and with optional upgrades a high volume mammography printing with up to 3.6 D-max.

Call for current parts list

Page 16


8900 Dry View PM Parts - Rev. 1 & 2

IM 8900PM2 8900 PM Kit 10K (7F6966) $956.21

IM 8E7331 Charcoal Fiter (Qty. 2) $258.19

IM 8E1925 Felt Pad Assembly $64.58

IM 8E4708 Duct Gasket $7.92

IM 8E4736 Drum Cover Gasket $6.80

IM 78801828027 4x4 Handi Pad $18.48

IM 96000001188 Tack Cloth $4.30

IM 78999858680 Bag with Twist Tie $104.98

IM 8E4554 Insulation Chassis $109.16

IM 8E4375 Insulation Cover Drum $97.24

IM 8E4737 Gasket Cover Drum $9.88

IM 8E1663 Air Filter $16.49

PM Kit needs these additional items:IM 8643074 DMSO Cleaner $46.06

IM 26101211303 Krytox Lube $104.98

IM 1C8287 Alcohol Wipe $49.10

IM TL5713 Neoprene Gloves $4.76

IM 78800537793 Lint Free Cloths $250.09

Note: Imtech Imaging PM Kit does not include Krytox Lube. It is available as an extra item. Krytox Lube will last for multiple PM’s.


IM 8900PM3 8900 PM Kit Rev. 3 (8F3415) $501.80

IM 8E7331 Charcoal Filter $258.19

IM 7F6183 Gasket Cover Thermal Kit $58.96

IM 8E1925 Felt Pad Assembly $64.58

IM 96000001188 Tack Cloth $4.30

IM 78999828680 Bag w/Twist Tie $1.19

IM 8E1663 Air Filter $16.49

PM Kit needs these additional items:IM 8643074 DMSO Cleaner $46.06

IM 26101211303 Krytox Lube $104.98

IM 1C8287 Alcohol Wipes 50/pk. $49.10

IM TL5303 Neoprene Gloves $8.15

IM 78800537793 Link Free Cloths $250.09

Note: Imtech Imaging PM Kit does not include Trap Baffle (8E4966). This is a stainless steel part and will last indefinitely with cleaning.

8900 Dry View PM Parts - Rev. 3


Page 17


MIM 9410 and MIM 200

DimensionsLength 17.2 inches. Width 8.1 inches. Height 17.5 inches.

Electrical Requirements90-135 VAC, 60 Hz or 180-265 VAC, 50 Hz

WarrantySix months - parts only. See warranties for specifics.

Quality Control TestingAll MIM systems are configured to your specifications and tested on our in-house ethernet network.

The MIM 9410 and MIM 200 Image Acquisition Systems are flexible and modular, having no monitor, keyboard, or mouse. Used as a Modality Server which can capture images from up to three directly connected Digital or Video modalities, converting the image data to DICOM and sending the images to a network destination of choice for printing, or used as a Print Server which receives DICOM images from an Ethernet network that the Print Server continuously monitors and automatically captures images addressed to it. After the images are formatted they are then sent to a designated DICOM compliant network printer. This is all accomplished without operator intervention.

Control is EasyOperator uses host control devices or optional keypads to capture, format, and print images. The touch screen keypad gives the operator many options such as print, store, sequential store, erase, copies, stop print, format, etc. For images that are received faster than the printer can print, both MIM systems will store the images in memory until they can be printed, thus increasing work flow and productivity.

OptionalIMS keypad

Page 18


Processor Equipment and Parts

Imtech Imaging, Inc. has a multitude of processor parts. If you do not find the part number you are looking for,

please contact us at (585) 594-1000.

Page 19


Control Is Easy

With the on board electronics that controls a variety of essential system controls, your engineer has many adjustment options that can simply be made by following the OEM adjustment procedures of the 100 Board in the electronics box.

Ease Of Use And Installation

The ease of use and install was well designed, a internal audible alarm to signify it’s ok to feed another film. A digital display reflects the current developer temperature, and with the push of a control panel mounted button you can check the replenishment rates. A integrated standby control puts the processor in a idle state when films are not being processed, but the processor still maintains chemistry temperature, and saves unnecessary wear on moving parts, at the same time saves on energy and water consumption. The dedicated developer, fixer, and wash drains help meet environmental codes. A fixer diverter valve feature that makes it possible for fixer effluent to be directed to silver recovery equipment. With a built in anti-siphoning device and the use of ambient temperature wash water , there is no hot water plumbing or a thermostatic mixing valve necessary.

Quality Images

The electronically controlled temperature sensing system uses thermostats, heaters, heat exchangers, and potentiometers to control the developer, fixer, and dryer temperature. Optional flooded replenishment rate help maintain chemistry in low volume sites. A system that controls itself, and gives you options, getting consistent quality radiographs has never been easier, no matter what your particular needs may be.

M6B 90-Second Film Processor

Used for General Radiography and with upgrades, can also be used for Mammography. This versatile processor can be a standalone or docked to a mutliloader. It’s easy to use, maintain, and delivers high quality 90-second processing. The M6B has become our flagship film processor in recent years for good reason.

Page 20


Dimensions Length 28in. Length with feed tray 38.5 in., Width 30 in. Height 48.5 in.

Electrical Requirements:Source 30 amp single phase - 208/220, 3-wire, earth ground required

Water RequirementTemperature 40˚ to 85˚ F, Pressure 25-65 psi

WarrantyOne year parts only. See warranties for specifics.

Quality Control TestingTo ensure customer satisfaction, it is Imtech Imaging’s policy that all our refurbished equipment is tested for a minimum of 48hrs. At such time the equipment is monitored to ensure all systems and components of the equipment are functioning at OEM standards.

Exterior and Interior Main FrameAll our film processors are stripped to the frame. The frames are sand blasted, sanded, repaired, and refinished as well as all exterior panels in a greige industrial coating, and a new face plate is installed to match the original OEM appearance.

Transformer and Electrical BoxesBoth boxes are completely dismantled sand blasted, sanded, and repaired of any defects, then refinished in a satin black industrial coating. All relays, solid state relays, circuit breakers, and EMI filters are replaced with new or reused, and tested. A new power supply and film counter is used in the electrical box along with a new or reconditioned PCB100 Board. All reused components that have any signs of wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable service.

Sensing ComponentsThe developer heater assembly, thermistor assembly, and overtemp assembly are replaced with new or reconditioned and tested, a new thermowell that houses all these components is used on every processor, as well as a new LCD developer temperature display is replaced on every M6B. The dryer thermistor is replaced with new or reconditioned, the dryer overtemp thermistor and dryer temperature potentiometer is always replaced with new.

Chemistry ComponentsA new March recirculation pump, Gorman-Rupp replenishment pump, water inlet solenoid valve, and a developer cooling solenoid valve are installed on every M6B. The new or reused molded tank assembly is thoroughly inspected for any defects and fitted with new or reused heat exchanger tubes, new seals, nuts, and tank stiffeners. All diverter and drain valves located in the front and rear of the processor are replaced with new, as well as all the tubing and hose clamps.

Main Drive and Transport AssemblyThe main drive bearing housings are reconditioned and reused, new bearings, drive gears, and drive shaft are installed on every M6B. The film transport system is made up of seven rack assemblies, an entrance detector, developer rack, dev/fix crossover (silicone), fixer rack, fix/wash crossover, wash rack (silicone), and a squeegee rack assembly, all rack assemblies are fitted with new roller assemblies, shafts, hardware, and side plates. The only parts on the racks that may be new or reconditioned are the tie rods and guide shoes. The dryer assembly is assembled with all new dryer rollers, shafts, drive pulleys, bearings, and a drive belt. A reconditioned and tested dryer heater is used and a reconditioned blower assembly is refinished in a satin black industrial coating, the assembly is fitted with new bearings and main shaft.

Refurbishing and Specifications of the M6B Processor

Page 21


Control is Easy

The on-board electronics control a variety of essential system controls, this allows you options such as developer and dryer temperature control, which can be adjusted with the integrated potentionmeters. Flooded replenishment rates are easily checked with the quick disconnect tubing to eliminate removing the rack assemblies and avoid possible chemistry spills.

Ease of Use and Installation

The ease of use and installation are well designed, an internal audible alarm to signify it’s ok to process another film. A digital display (on AM models only) reflects the current developer temperature, and with the push of a control panel mounted button you can check the replenishment rates. An integrated standby control puts the processor in an idle state when films are not being processed, but still maintains chemistry temperature, and saves unnecessary wear on moving parts, at the same time saves on energy and water comsumption.

Both the M35A and M35AM have service friendly access and can be installed for through the wall operation and with the use of ambient temperature wash water hot water plumbing isn’t necessary, making for an easy installation.

Quality Imaging

The electronically controlled temperature sensing system uses thermostats, heaters, heat exchangers, and potentiometers to control the developer, fixer, and dryer temperature. Optional flooded replenishment rate help maintain chemisttry in low volume sites.

A system that monitors itself, and gives you options is just a few reasons why the M35 has earned a worldwide reputation for reliability and produces quality radiographies.

M35A / AM 120-Second Film Processor

Designed for medium and low volume processing, this table top or stand mounted processor is a great fit for imaging departments, surgical, and mammography suites. It has high quality results at a low volume processor cost.

Page 22


DimensionsLength 31in. Length with feed tray and receive bin 50 7/8 in.Width 26 in. Height 20in. Height with stand 40 in.

Electrical RequirementsSource 20 amp 220V or 115V 50/60 HZ

Water RequirementsTemperature 40˚ to 85˚ F Pressure 25-65

WarrantyOne year - parts only. See warranties for specifics.


Exterior and Interior Main FrameAll our film processors are stripped to the frame. The frames are sand blasted , sanded, repaired, and refinished as well as all exterior panels in a greige industrial coating, and a new face plate is installed to match the original OEM appearance.

Electrical BoxThe electrical box is completely dismantled sand blasted, sanded , and repaired of any defects, then refinished in a satin black industrial coating. All relays, solid state relays, EMI filter (220 Processors Only),and circuit breakers are replaced with new or reused, and tested. A new or reconditioned PCB100 Board is installed. All reused components that have any signs of wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable service.

Sensing ComponentsThe developer heater assembly, thermister assembly, and overtemp assembly are replaced with new or reconditioned and tested, a new thermowell that houses all these components is used on every processor. A new dryer PCB 800 Board, dryer overtemp thermister, and dryer temperature potentiometer is replaced on every processor to ensure correct dryer temperature.

Chemistry ComponentsA new March recirculation pump, Gorman- Rupp replenishment pump, water inlet assembly is installed on every M35 processor. The three chemistry tank assemblies are replaced with new and fitted with new or reused heat exchanger tubes, new seals, nuts, fittings, and tank stiffeners are installed, as well as all the tubing , tubing fittings, and hose clamps are replaced with new.

Main Drive and Transport AssemblyA new or reconditioned and tested main drive motor is installed. The main drive bearing housings are replaced with new or reconditioned and reused, new bearings, worm drive gears, and drive shaft are installed on every M35. The film transport system is made up of seven rack assemblies, an entrance detector, developer rack (standard), or developer rack (mammo), dev/fix crossover (silicone), fixer rack, fix/wash crossover, wash rack (silicone), dryer assembly. All rack assemblies are fitted with new roller assemblies, shafts , hardware, and side plates. The only parts on the racks that may be new or reconditioned are the tie rods and guide shoes. A new or reconditioned and tested dryer heater is used and a reconditioned blower assembly is refinished in a satin black industrial coating.

Refurbishing and Specifications of the M35 Processor

Page 23


Control is Easy

The on-board electronics control a variety of essential system controls, this allows you options such as developer and dryer temperature control, which can be adjusted with the integrated potentionmeters. Replenishment rates are easily checked with the quick disconnect tubing to eliminate removing the rack assemblies and avoid possible chemistry spills.

Ease of Use and Installation

The ease of use and installation are well designed, an internal audible alarm to signify it’s ok to process another film. A digital display reflects the current developer temperature for simplifying regulatory record keeping, and with the push of a control panel mounted button you can check the replenishment rates. An integrated standby control turns off the film drive, dryer blower, and dryer heater when films are not being processed, but still maintains chemistry temperature,and saves unnecessary wear on moving parts, at the same time saves on energy and water comsumption.

The MIN-R has service friendly access and can be installed for through the wall operation and with the use of ambient temperature wash water hot water plumbing isn’t necessary, making for an easy installation.

Quality Imaging

The electronically controlled temperature sensing system uses thermostats, heaters, heat exchangers, and potentiometers to control the developer, fixer, and dryer temperature. Optional flooded replenishment rate help maintain chemisttry in low volume sites.

A system that monitors itself, and gives you options is just a few reasons why the MIN-R has earned a worldwide reputation for reliability and produces quality mammographs.

MIN-R Mammography Film Processor

Designed for mammography and a shared processing environment, this stand alone table top or stand mounted processor can also be docked to a miniloader 2000P for room light film handling. This combination is ideal for mammo suites, resulting in hight quality processing in an affordable, compact package.

Page 24


DimensionsLength 29.7 in. Length with feed tray and receive bin 51 in.Width 26.5 in. Height 20.5 in. Height with stand 40 in.

Electrical Requirements220V 50/60 HZ



Exterior and Interior Main FrameAll our film processors are stripped to the frame. The frames are sand blasted , sanded, repaired, and refinished as well as all exterior panels in a greige industrial coating, and a new face plate is installed to match the original OEM appearance.

Electrical BoxThe electrical box is completely dismantled sand blasted, sanded , and repaired of any defects, then refinished in a satin black industrial coating. All relays, solid state relays, EMI filter (220 Processors Only),and circuit breakers are replaced with new or reused, and tested. A new or reconditioned PCB100 Board is installed. All reused components that have any signs of wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable service.

Sensing ComponentsThe developer heater assembly, thermister assembly, and overtemp assembly are replaced with new or reconditioned and tested, a new thermowell that houses all these components is used on every processor. A new dryer PCB 800 Board, dryer overtemp thermister, and dryer temperature potentiometer is replaced on every processor to ensure correct dryer temperature.

Chemistry ComponentsA new March recirculation pump, Gorman- Rupp replenishment pump, water inlet assembly is installed on every MIN-R processor. The three chemistry tank assemblies are replaced with new and fitted with new or reused heat exchanger tubes, new seals, nuts, fittings, and tank stiffeners are installed, as well as all the tubing , tubing fittings, and hose clamps are replaced with new.

Main Drive and Transport AssemblyA new or reconditioned and tested main drive motor is installed. The main drive bearing housings are replaced with new or reconditioned and reused, new bearings, worm drive gears, and drive shaft are installed on every MIN-R. The film transport system is made up of seven rack assemblies, an entrance detector, developer rack (mammo), dev/fix crossover (silicone), fixer rack, fix/wash crossover, wash rack (silicone), dryer assembly. All rack assemblies are fitted with new roller assemblies, shafts , hardware, and side plates. The only parts on the racks that may be new or reconditioned are the tie rods and guide shoes. A new or reconditioned and tested dryer heater is used and a reconditioned blower assembly is refinished in a satin black industrial coating and reused.

Refurbishing and Specifications of the MIN-R Film Processor

Cycle TimeStandard Cycle: 164 films/hourRapid Cycle: 209 films/hour

WarrantyOne year - parts only. See warranties for specifics

Page 25


Bright Spot Illuminator - Model 188

A radiology department standard, this high intensity illuminator adjusts for easy viewing of dense film. It features a rheostat foot switch control and swivel base that can be wall mounted or placed on a desktop.

FinishLight Greige

DimensionsWidth 6 in. Depth. 6.75 in. Height 7.5 in.

Electrical Requirements120V 60Hz,.7 ampsElectrical Cord 3 conductor, 6 foot line cord

These processors have four integrated transport speeds for radiology departments where multi-speed processing is necessary.

The refurbishing process of our Rapid Access Processors is the same thorough approach as that of our flagship processors, same warranty, and the same committment to you and your customers.

Refurbished Rapid Access ProcessorsCall for availability and quote

270RA, 460RA, 480RA, 2000, 2000A3000RA, 5000RA

Cat. No. 270Cat. No. 460Cat. No. 480Cat. No. 2000/A (not multi-speed)Cat. No. 3000Cat. No. 5000

Page 26


The multiloader 7000 is a room light film handler designed for high volume radiology departments, accommodating 13 different film sizes 7 at time. Capable of unloading and loading a cassette, transporting the exposed film to the integrated 3000RA processor delivering you a dry ready to read 35 x 43 cm radiograph in just 80 seconds, without the need of a darkroom.

The refurbishing of our multiloader 7000’s follow the same thorough description of that of the ML300 and ML700 Plus, same warranty and same commitment to quality.

DimensionsWidth 32.5 in. Depth. 33.5 in. Height 55 in.

Electrical Requirements120/208V 60 Hz triple phase, 30 Amp120/220V 60 Hz single phase, 30 Amp120/240V 60 Hz single phase, 30 Amp

Water RequirementsTemperature 40 to 84 FFlow Rate .5gal. Per minute (+/-10%)Drain 4 gal. Per minute

Refurbished Multiloader 7000 Film ProcessorCall for availability and quote

The miniloader 2000P is a roomlight film handler that automatically unloads exposed films, processes them in the integrated MIN-R processor and reloads your MIN-R2 cassettes in just 12 to 15 seconds depending on film size.

The refurbishing of our miniloaders follow the same thorough description of that of the ML 300 and ML700, same warranty and same committment quality.

Refurbished Miniloader 2000P Film ProcessorCall for availability and quote

DimensionsWidth 28.3 in., Depth 31.5 in., Height 55 in..

Electrical Requirements110V/240V Single phase


CassettesMin-R2 cassettes (18 x 24) and (24 x 30)

Page 27


Control Is Easy

With the on board microprocessor you can track film consump-tion, determine what size film you have in the seven magazines, film type, how much film is in each magazine, as well as when a magazine is almost empty.

Ease Of Use

The Multiloader 700 Plus has many control panel options - you can open the front door to access the seven supply magazines (which hold 110 sheets of film each and can be configured to 15 different film sizes, seven at a time). At the touch of a button there are special functions such as load only and unload only, green, yellow, and red LEDs let you know it’s ok to begin another cycle, there is currently a film being processed , or there is a cycle error. The control panel display will show what magazine level the current cassette size is using, as well as if a cassette was empty or if it was unloaded, but not supplied with a new unexposed film.

Advatages

The new steam lined Multiloader 700 Plus will help save techni-cians trips to the darkroom, making the radiology department more efficient and productive. With three install options (side-by-side left or right feed configuration, or in-line configuration) the Multiloader 700 Plus can be made to fit nearly any floor space, eliminating the need for a darkroom, remodeling, and the expense. This saves time and space.

Multiloader 700 Plus Daylight System

The Multiloader 700 Plus docked to a X-Omat Processor is a high volume room light film handler that unloads exposed films and transports them to the processor, at the same time reloading your cassette with unexposed film - all in just 15 seconds.

Page 28


DimensionsHeight 49.2 in., Width 31 in., Depth 28 in., Depth with tunnel 39.75 in.

Electrical Requirements190 to 250 VAC 10 AMP single phase 2-wire with earth ground 50/60 HZ.

Cycle Time55 seconds - depending on film processor.


Quality Control TestingTo ensure customer satisfactation, it is Imtech Imaging’s policy that all of our refurbished multiloader equipment is tested for a minimum of 48 hours and must complete 2,500 error free cycles. At such time all parameters and OEM adjustments are made and the equipment is monitored to ensure that all systems and components are functioning at OEM standards.

Exterior and Interior Main FrameAll our multiloaders are stripped to the main frame. The frames are sand blasted, sanded, repaired, aligned, and refinished in a satin black industrial coating. The exterior panels are sanded and repaired of any breaks, cracks, and scratches to ensure a light tight multiloader, and refinished in a greig industrial coating to match the OEM appearance.

Mechanical System - Cassette Transport - Cassette Centering - Cassette Sucker Bar - Conveyor Assembly - Magazine Holder - Magazine Opener - Film Pocket - Tunnel Interface Assembly The mechanical systems are disassembled, polished , refinished, rebuilt, inspected, tested, and reassembled to the main frame along with all new switches, sensors, belts, and adjusted to OEM specifications and tested again at run in to assure trouble free service.

Electromechanical System - Motors - Fans - SensorsThe electomechanical systems are disassembled, replaced with new or reused, rebuilt, polished, refinished, and tested. The complete wiring harness is bench top tested and inspected for any signs of corrosion. All repairs and replacement of terminal end connectors and wires are made at this time and labeled for easy service identification.

Pneumatic Systems - Compressor - Vacuum Pumps - Pneumatic Solenoids, and SwitchesThe pneumatic components are disassembled, replaced with new or reused, rebuilt with OEM rebuild kits, polished, refinished, and tested. At reassembly the main frame is fitted with a new water trap and all new Festo fittings, pneumatic lines, and seals to ensure a leak free pneumatic system.

Electronic System - Master - Slave - Drive - Sensor PCB’sThe electronic components are cleaned and inspected, fitted with the latest capaciters, software versions, reinstalled, and tested. During power up the power supply and all test points are checked for correct operating voltages to ensure all components are set to OEM specifications.

Refurbishing and Specifications of the Multiloader 700 Plus Daylight System

Page 29


Control Is Easy

With the on board microprocessor and a digital display you can determine that the integrated 3000 RA processor is up to tempera-ture, ready to process films, check replenishment rates, track film consumption, determine film size/type, how much film is in each of the three magazines, as well as when a magazine is almost empty.

Ease Of Use

The Multiloader 300 Plus has many control panel options, choose KWIK/RA, rapid, standard, or extended processing cycle, access the three magazines easily from the front of the unit (which holds 110 sheets of film each and can be configured to 15 different film sizes three at a time.) At the touch of a button there are special functions such as load only and unload only, green, yellow, and red LED’s display it is OK to begin another cycle, there is currently a film being processed, or a error in the system has occurred. The location and the number of the error will be displayed so you can record it and bring it to the field engineers attention for less down time. The control panel display will also show what magazine level the current cassette size is using, as well as if a cassette was empty or it was unloaded, but not supplied with a new unexposed film.

Advatages

The compact and quieter Multiloader 300 Plus handles and processes film near the examination site saving the technicians trips to the dark room, making the radiology department more efficient and productive. With it’s automatic standby feature, static eliminator at the dryer exit, and the compact size of the Multiloader 300 Plus it can fit nearly any floor space, eliminating the need for a dark room and remodeling.

Multiloader 300 Plus Daylight System

The Multiloader 300 Plus is a film handler that can be used for mammography to the main radiology department. The compact Multiloader 300 unloads X-Omatic or MIN-R2 cassettes, processes the exposed film in the integrated 3000 RA processor which offers four processing speeds, at the same time reloads the cassettee with a unexposed film and gives you a ready-to-read radiograph in approximately 72-80 seconds depending on film size.

Page 30


Dimensions Height 50.4 in., Width 32.5 in., Depth 33.6 in.

Electrical Requirements:120/208 to 120/240 3 phase and single phase 30 AMP 60 HZ

Water RequirementsTemperature 40 to 85 FPressure 25 - 65

Quality Control TestingTo ensure customer satisfactation, it is Imtech Imaging’s policy that all of our refur-bished multiloader equipment is tested for a minimum of 48 hours and must complete 2,500 error free cycles. At such time all parameters and OEM adjustments are made and the equipment is monitored to ensure that all systems and components are functioning at OEM standards.

Exterior and Interior Main FrameAll our multiloaders are stripped to the main frame. The main frame is completely dismantled and polished, the area that houses the 3000 RA is sand blasted, etch primed, and sprayed with an industrial coating that resists chemistry to protect the walls and floor of the main frame from corrosion. The exterior panels are sanded and repaired of any breaks, cracks, and scratches to ensure a light tight multiloader, and refinished in a greig industrial coating to match the OEM appearance.

Mechanical System - Cassette Transport - Cassette Centering - Cassette Sucker Bar - Conveyor Assembly - Magazine Holder - Magazine Opener - Film Pocket - Film Interface Shoot - Film InterfaceThe mechanical systems are disassembled, polished , refinished, rebuilt, inspected, tested, and reassembled to the main frame along with all new clutches, rollers, switches, sensors, belts, cassette opener, and adjusted to OEM specifications and tested again at run in to assure trouble free service.

Electromechanical System - Motors - Fans - SensorsThe electomechanical systems are disassembled, replaced with new or reused, rebuilt, polished, refinished, and tested. The complete wiring harness is bench top tested and inspected for any signs of corrosion. All repairs and replacement of terminal end connectors and wires are made at this time and labeled for easy service identification.

Pneumatic Systems - Compressor - Pneumatic Bank Assembly - SwitchesThe pneumatic components are disassembled, a new pneumatic bank assembly is installed, the remaining components are new or reused and rebuilt with OEM rebuild kits, polished, refinished, and tested. At reassembly the main frame is fitted with new water traps and all new Festo fittings, pneumatic lines, and seals to ensure a leak free pneumatic system.

Electronic System - Master - Slave - Drive - Sensor PCB’sThe electronic components are cleaned and inspected, fitted with the latest software versions, reinstalled, and tested. During power up the power supply and all test points are checked for correct operating voltages to ensure all components are set to OEM specifications.

Integrated ProcessorThe refurbishing of the integrated processor follows the same thorough description as our flagship processors.

Refurbishing and Specifications of the Multiloader 300 Plus Daylight System

Cycle Time72-80 seconds - depending on film size.


Page 31


Not only does Imtech Imaging, Inc. provide excellent repair work, we also provide a variety of new & remanufactured products such as:

New CassettesImtech Imaging, Inc. offers an extensive line of new x-ray cassettes, including Agfa, JPI America, Kodak, Konica, Rego, Soyee, Spectronics and Sterling. These cassettes offer excellent quality and value. Contact us and we will help you choose the right cassette for your needs.

Remanufactured Cassettes Imtech Imaging, Inc. takes great pride in offering high quality refurbished x-ray cassettes to our customers. The remanufactured cassettes that RCRC ships out are cassettes we would trust our own health with. We offer refurbished cassettes in:3M, Agfa, DuPont, Fuji, Kodak, Konica. If you do not see the cassette listed in which you are interested contact us. If we do not have what you need in stock, perhaps we can suggest an acceptable alternative. No matter the size of your budget, Imtech Imaging, Inc. can provide you with an excellent cassette.

ID Camera ProductsThe high cost of ID cameras can put a squeeze on any radiology department’s budget. Imtech Imaging, Inc. has the solution. We provide high quality remanufactured Kodak X-Omatic ID Cameras. These ID cameras operate like new. Imtech Imaging, Inc. not only remanufactures the internal workings, but will go the extra mile to make it look like new. Add to this our 90 day guarantee and these ID cameras are a reasonable way to acquire the reliable equipment you need. If you would like to know more about our refurbished ID cameras, or inquire about another style of ID camera please contact us.

ScreensBecause having quality radiographs is important to you, it is important to Imtech Imaging, Inc. With that in mind our technicians can assist you with the proper intensifying screen combination for your needs. Imtech Imaging, Inc. can choose from a wide variety of intensifying screen sizes, speeds and brands, including:3M, Agfa, Fuji, Kiran, Kodak, Konica, MCI Optionix, and Sterling. These screens can be installed directly into your existing x-ray cassettes, or you may choose to have an x-ray cassette built to your specifications.

Customized Intensifying ScreensSpecial procedures require special intensifying screens. Our technicians will discuss with you the procedure you want to perform and offer suggestions as to the best intensifying screens and cassette for your specific needs. Whatever your x-ray cassette specifications, Imtech Imaging, Inc. can meet them.

XRay Cassettes, Screens, Grids, ID Camera

Page 32


GridsAluminum Interspaced X-Ray Grid AdvantageAccommodate standard film sizes from 5 x 7” to 14 x 36” ( special sizing also available). Array of ratios, focal ranges and densities available. Contains the purest lead available to ensure superior efficiency in removing scattered radiation. Use of aluminum interspaced and lead strips, precisely milled to uniformity, provides superior quality images. Grid strips are sealed between a smooth aluminum cover and finished in enamel, providing complete resistance to heat and moisture guaranteeing years of trouble free service.

Grid Adaptive ProductsGrid EncasementsThe polycarbonate grid encasements available at Imtech Imaging, Inc. serve as a real protection for your grid. The unbreakable polycarbonate is designed to absorb the daily abuse your grids receive.

Protect-A-GridAvailable with or without channels, Protect-A-Grid encasements are a convenient way to provide grid protection. Built using Lexan plastic, Protect-A Grid encasements ensure a durable grid encasement, excellent for daily use.

Grid GuardsGrid guards easily snap onto whatever x-ray cassettes your radiology technicians are using. These metal framed grid adapters thus allow for easy grid protection. Imtech Imaging, Inc. can encase your existing grid or supply you with a grid and encasement to your specifications.

GRID-LOKImtech Imaging, Inc. GRID-LOK is the latest innovation in grid protective devices. Although it is made of light-weight durable

plastic, there is nothing light weight about the benefits offered by the GRID-LOK. What’s unique about this device is that it is designed with easy to use pressure clips that hold the cassette in place. Not only is your grid protected within the GRID-LOK device, the cassette is securely held in place so there is no danger of dropping the cassette out of the device causing physical harm or cassette damage. The GRID-LOK will accept all types of cassettes, easily converting any cassette to a grid cassette, and is excellent for CR applications. The GRID-LOK provides an additional layer of protection against contamina-tion from blood-contained viruses.

The distinctive locking feature of the Grid-Lok securely holds in any 35 x 43 cm (14 x 17”) a technologist chooses to utilize. For a closer look just click on the photo to the right. Currently available in 35 x 43 cm (14x17”), the GRID-LOK can be ordered with any grid and carries a 1 year warranty against manufacturing defects

XRay Cassettes, Screens, Grids, ID Camera

Page 33


Film Shredder for the Radiology Department

Specifically designed with radiology in mind, the Imageater is essential for destroying all unwanted images and film library purges. With it’s 16” film entrance, it will accommodate all film sizes.

A powerful 2.1 HP motor provides the power to handle large runs without interruption.

The Imageater has specifically designed hardened steel, serrated cutting cylinders and has a daily usage recommendation of 10,000 films per day. Cut type is a strip cut with a size of 7/32”, a continuous duty cycle, a 150 basket capacity of 14x17 radiographs.

With a Cutter Warranty of 20 years, the Imageater is sturdy and reliable. Other features include auto start/stop, reverse, auto shut off when baket is full, auto-stop on jams, and a safety interlock switch. The Imageater is a sensible addition to any radiology department.

Help meet HIPAA Compliancy with the New Imageater Film Shredder

Dimensions Length 18.5 inches. Width 23.5 inches. Height 36.5 inches.

Electrical Requirements:120 VAC

WarrantyCutter warranty is 20 years. .

Page 34


Parts

Imtech Imaging, Inc. has a multitude of processor parts. If you do not find the part number you are looking for,

please contact us at (585) 594-1000.

Page 35


Parts - M6B Film Processor

Kodak M6B Film Processor Rack AssembliesPart No. Description List Price1C7377 Entrance Detector Assy $1,257.48240680 Developer Rack Assy $3,152.54240684 Dev/Fix Crossover Assy $1,634.28240681 Fix Rack Assy $3,113.62 240682 Wash Rack Assy $3,420.82 240685*779155 Fix/Wash Crossover Assy $1,064.02240686 Squeegee Rack Assy $1,284.24779155 Fix/Wash Crossover Assy $1,064.02

Kodak M6B Film Processor BearingsPart No. Description List Price1C4395 Bearing $7.15190481 Ball Bearing $22.31192019 Bearing $72.31240060 Bearing $25.36240061 Bearing $16.73458389 Bearing $15.16469069 Bearing $12.80469079 Bearing $7.29470203 Assembly Bearing $123.825B6527 Rocker Bearing $8.21650701 Bearing $16.22650702 Bearing $13.75650703 Bearing $13.63650705 Bearing $6.41650707 Bearing $17.36650711 Bearing $15.79899216 Bearing $10.08963435*899216 Bearing $10.08

Page 36



Kodak M6B Film Processor ChainsPart No. Description List Price458240 Chain $41.59459263 Chain $79.73459333 Segment Chain $20.64462688 Chain $79.73469349 Chain $28.94

Kodak M6B Film Processor RollersPart No. Description List Price1C7381 Lustran Utility Roller $51.661C7384 Lustran Roller Assembly “A” $128.921C7386 Lustran Roller Assembly “D” $96.791C7387 Lustran Roller Assembly “H” $50.341C7389 Lustran Roller Assembly “E” $55.941C7390 Lustran Roller Assembly “C” $71.381C7552 Detector Assy Roller $40.23240066 Crossover Roller Assembly $518.18240067 Crossover Roller Assembly $510.44246915 Assy Squeegee Drive Pressure Roller $466.91246916 Assy Squeegee Driven Pressure Roller $396.71286947 Roller $149.24286949 “C” Transport Roller Assembly $218.68458423 Squeegee Roller Assembly “J” $186.12458949 Roller Assembly “L” & “N” $168.32459379 “C” Roller $100.28459380*286947 Roller $149.24467015 Stainless Steel Roller Assembly “F” $263.84467016 Roller Assembly “K” $197.33467017 Roller Assembly Top “P”, “R”, “E” $176.52470085 Rubber Crossover Roller Assembly $208.72470086 Roller Assembly “G” $177.04474469*5B6854 Roller Assembly “T” $280.14474599 “N” Rewet Roller $200.84475453*5B6854 “T” Roller $280.14490108 Entrance Assy Drive Detector Roller $193.48

Page 37



Kodak M6B Film Processor RollersPart No. Description List Price490109 Entrance Assy Driven Detector Roller $193.485B6076 Roller Assembly “B” $195.645B6854 Roller Assembly “T” $280.145B6854 “T” Roller $280.14536884 Rubber Roller Assembly “B” $351.16562330*1C7552 Roller $40.23943202 Idler Roller $20.20963965 Idler Roller $20.58968434*968437 Crowned Drive Roller $108.41

Kodak M6B Film Processor ShaftsPart No. Description List Price240055 Shaft $108.20456162 Shaft $24.78458164 Drive Shaft $74.34458175 Shaft $95.27458207 Shaft $92.26458235 Drive Shaft $92.65458390 Shaft $81.35458391 Shaft $53.23458393 Shaft $126.70472315 Shaft $38.69472446 Drive Shaft $170.24559787 Shaft $88.57

Kodak M6B Film Processor Side PlatesPart No. Description List Price286900 Crossover Side Plate $8.62286904 Non-Drive Developer Side Plate $65.77286907 Drive Developer Side Plate $81.07286910 Non-Drive Wash Side Plate $79.04286912 Drive Wash Side Plate $76.99286914 Non-Drive Fixer Side Plate $62.83286917 Drive Fixer Side Plate $52.36286922 Squeegee Side Plate $19.63

Page 38



Kodak M6B Film Processor Side PlatesPart No. Description List Price477000 Non-Drive Side Plate $12.58477001 Drive Side Plate $15.10779433*9B8663 Drive Side Detector Crossover Side Plate $12.47779434*9B8664 Non-Drive Side Detector Crossover Side Plate $14.90

Kodak M6B Film Processor SpringsPart No. Description List Price459344*1C7106 Spring $10.20459344*1C7106 Spring $10.20467843 Spring $6.31474645 Spring $6.31479820 Spring $7.30562609 Spring $4.06968445 Belt Tensioner Spring $19.50

Page 39


Parts - M35 Film Processor

Kodak M35 Film Processor Rack AssembliesPart No. Description List Price261275 Developer Rack Assy $1,934.86 261276 Fix/Wash Crossover Assy $706.10 261277 Wash Rack Assy $2,783.29 333794*5B6163 Entrance Detector Assy $603.67333795 Developer/Fix Crossover Assy $1,514.69 333796 Dryer Rack Assy $3,551.66 748165 Fix Rack Assy $2,591.64

Kodak M35 Film Processor BearingsPart No. Description List Price240060 Bearing $25.36333543*5B2054 Bearing $5.24472592*5B6527 Rocker Bearing $8.21490092 Bearing $10.61543993 Bearing $9.01571241 Bearing $6.74595426 Bearing $32.52650701 Bearing $16.22650702 Bearing $13.75650703 Bearing $13.63650707 Bearing $17.36650710 Rack Bearing $14.92

Kodak M35 Film Processor ChainsPart No. Description List Price458240 Chain $41.59480168 Drive Chain $40.42651881 Chain $4.92

Kodak M35 Film Processor RollersPart No. Description List Price1C7554 “D” Roller $71.581C7555 Lustran Roller $45.741C7556 Lustran Roller $51.701C7557 Knurled Roller $59.64

Page 40



Kodak M35 Film Processor RollersPart No. Description List Price1C7558 Lustran “A” Roller $73.57240747 Developer/Fix Crossover Roller $464.68246882 Driven Detector Roller $120.25246883 Drive Detector Roller $138.46246917 Silicone “G” Roller $438.47246918 Silicone “F” Roller $444.14287004*5B6077 “B” Roller $110.44287005 Rubber “A” Roller $168.32287020*1C7554 “D” Roller $71.58287028 “G” Roller $123.37287030 “F” Roller $245.70287032 Rewet Roller $159.46287048 Rubber Crossover Roller $156.70287059*1C7555 Lustran Roller $45.74287066*1C7556 Lustran Roller $51.70287067 Dryer (Phenolic) Roller $96.74287078 Rubber Roller $132.05287081 Dryer (Phenolic) Roller $157.00287083 Dryer (Phenolic) Roller $108.41287656 Dryer w/o Bearing Roller $137.38419788*1C7557 Knurled Roller $59.64485406 Silicone Crossover Roller $359.635B6077 “B” Roller $110.44748126*1C7558 Lustran “A” Roller $73.57748147 Crossover (Phenolic) Roller $114.48

Page 41



Kodak M35 Film Processor ShaftsPart No. Description List Price287003 Roller Shaft $54.74287027 Drive Shaft $107.42287037 Shaft $69.65287039 Drive Shaft $190.88287047 Drive Shaft $75.46287079 Upper Roller Shaft $90.32287085 Lower Roller Shaft $34.80287088 Dryer Drive Shaft $34.88482222 Main Drive Shaft $111.70

Kodak M35 Film Processor Side PlatesPart No. Description List Price246879 Crossover Detector Side Plate $12.38264432 Side Non-Drive Side Plate $59.12286910 Non-Drive Side Plate $79.04286912 Drive Side Plate $76.99477000 Non- Drive Turnaround Side Plate $12.58477001 Drive Side Turnaround Side Plate $15.10477005 Side Plate $12.22490123 Side Drive Side Plate $124.80911809 Drive Side Plate $29.57911845 Non-Drive Side Plate $28.92

Kodak M35 Film Processor SpringsPart No. Description List Price1C7106 Extension Spring $10.20459344*1C7106 Extension Spring $10.20467843 Spring $6.31474645 Spring $6.31479820 Roller Spring $7.30562609 Air Tube Spring $4.06

Page 42


Parts - Min-R Film Processor

Kodak Min-R Film Processor Rack AssembliesPart No. Description List Price3E1943 Dev/Fix Crossover Assy $839.69 3E1944 Developer Rack Assy $3,846.493E1945 Entrance Detector Assy $626.043E1946 Dryer Rack Assy $2,597.64 261276 Fix/Wash Crossover Assy $706.10261277 Wash Rack Assy $2,783.29748165 Fixer Rack Assy $2,591.64

Kodak Min-R Film Processor BearingsPart No. Description List Price240060 Bearing $25.363E0953 Bearing $4.933E0958 Main Drive Bearing $27.733E0967 Bearing $35.633E0990 Bearing $28.45472592*5B6527 Rocker Bearing $8.21490092 Bearing $10.615B6527 Rocker Bearing $8.21532054 Bearing $6.29543993 Bearing $9.01571241 Bearing $6.74594273 Arm Bearing $6.76595426 Bearing $32.52650701 Bearing $16.22650702 Bearing $13.75650703 Bearing $13.63650707 Bearing $17.36650710 Bearing $14.929B8719 Bearing $17.05

Kodak Min-R Film Processor ChainsPart No. Description List Price2E4325 Long Chain $23.872E4326 Short Chain $23.89458240 Chain $41.59480168 Drive Chain $40.42752731 Drive Chain $20.03

Page 43


Parts - Min-R Film Processor

Kodak Min-R Film Processor RollersPart No. Description List Price1C7554 "D" Roller $71.581C7555 Lustran Roller $45.741C7556 Lustran Roller $51.701C7557 Knurled Roller $59.641C7558 Lustran "A" Roller $73.571C7633 Rubber "F" Roller $148.04246882 Driven Detector Roller $120.25246883 Drive Detector Roller $138.46246917 Silicone "G" Roller $438.47246918 Silicone "F" Roller $444.14287013*246917 Silicone "G" Roller $438.47287028 "G" Roller $123.37287032 Rewet Roller $159.46287048 Rubber Crossover Drive Roller $156.70287078 Rubber Roller $132.05287083 Dryer (Phenolic) Roller $108.41287656 Dryer w/o Bearing Roller $137.383E0951 Driven Roller $58.563E0952 Drive Roller $98.783E0973 Cluster Roller $80.813E0985 Rewet Roller $142.513E0994 Master Roller $226.513E1925 Roller $86.203E1926 Roller $59.243E1938 Drive Roller $319.723E1939 Driven Roller $299.803H4144 Rubber Dev Exit Pinch Roller $147.783H4199 Dev Rack Exit Pinch Roller $125.965B6077 "B" Roller $110.44748147 Crossover (Phenolic) Driven Roller $114.48

Page 44


Parts - Min-R Film ProcessorKodak Min-R Film Processor Shafts

Part No. Description List Price287003 Roller Shaft $54.74287027 Drive Shaft $107.42287037 Shaft $69.65287039 Drive Shaft $190.88287047 Drive Shaft $75.46287079 Upper Shaft $90.32287085 Lower Shaft $34.80287088 Dryer Drive Shaft $34.883E0957 Main Drive Shaft $113.503E0982 Master Roller Shaft $73.113E0983 Cluster Roller Shaft $38.57482222 Main Drive Shaft $111.70

Kodak Min-R Film Processor Side PlatesPart No. Description List Price264432 Non-Drive Side Plate $59.12286910 Right Side Non-Drive Side Plate $79.04286912 Left Side Drive Side Plate $76.993H4125 Crossover Detector Side Plate $8.183H4146 Side Plate $14.19477000 Drive Side Turnaround Side Plate $12.58477001 Non-Drive Turnaround Side Plate $15.10477005 Crossover Side Plate $12.22490123 Drive Side Plate $124.807C8317*4E5018 Drive Side Plate $24.597C8318 Non-Drive Side Plate $24.76911809 Drive Side Plate $29.57911845 Non-Drive Side Plate $28.92

Kodak Min-R Film Processor SpringsPart No. Description List Price246580 Spring $26.423E0995 Exit Pinch Spring $2.723E0996 Verticle Turnaround Spring $27.883E0997 Horizontal Turnaround Spring $24.07467843 Spring $6.31474645 Spring $6.31479820 Roller Spring $7.30562609 Air Tube Spring $4.06

Page 45


Parts - 5000 Film Processor

Kodak 5000 Film Processor Rack AssembliesPart No. Description List Price1C7377 Entrance Detector Assy $1,257.48 8B6965 Dev/Fix Crossover Assy $1,234.28 8B6966*3H8726 Fixer/Wash Crossover Assy $641.128B6969 Wash Rack Assy $1,696.008B6970 Squeegee Rack Assy $1,833.038B7293 Developer Rack Assy $2,553.318B7294 Fixer Rack Assy $2,527.76

Kodak 5000 Film Processor BearingsPart No. Description List Price1C4395 Bearing $7.15190481 Ball Bearing $22.31192019 Ball Bearing $72.31458389 Bearing $15.165B6527 Rocker Bearing $8.21650702 Bearing $13.75650703 Bearing $13.63650705 Bearing $6.41650707 Bearing $17.36650711 Bearing $15.798B7405 Bearing $7.51899216 Bearing $10.08914507 Bearing $7.91

Kodak 5000 Film Processor ChainsPart No. Description List Price458240 Chain $41.59459263 Chain $79.73462688 Chain $79.73911150 Drive Chain $27.05

Page 46



Kodak 5000 Film Processor RollersPart No. Description List Price1C0489 D/F Crossover Silicone White Roller $380.441C7381 Lustran Utility Plastic Black Roller $51.661C7384 Lustran “A” Plastic Black Roller $128.921C7386 Lustran “D” Plastic Black Roller $96.791C7552 Detector Assy Plastic Black Roller $40.23246915 Squeegee Assy Silicone White Roller $466.91458423 Squeegee “J” Phenolic Tan Roller $186.12458949 “N” Squeegee Phenolic Tan Roller $168.32459379 “C” Roller $100.28467015 Stainless Steel “F” Roller $263.84467016 “K” Phenolic Tan Roller $197.33467017 “E”, “R”, “P” Phenolic Tan Roller $176.52470085 Rubber Crossover Black Roller $208.72470086 Rubber “G” Black Roller $177.04474599 Rubber “N” Rewet Black Roller $200.84490108 Entrance Assy Rubber Black Roller $193.48490109 Entrance Assy Rubber Black Roller $193.485B6058 Stainless Steel “T” Roller $278.595B6076 “B” Phenolic Tan Roller $195.645B6099 Silicone White Roller $325.225B6370 Phenolic Tan Roller $70.975B6406 Stainless Steel “F” Roller $162.505B6407 Rubber “G” Black Roller $117.185B6413 Rubber “F” Black Roller $95.045B6414 Stainless Steel Roller $191.535B6764 Crowned Drive Roller $82.94536884 Rubber “B” Black Roller $351.16943202 Idler Roller $20.20963965 Idler Roller $20.58968180 Roller Assembly $360.48

Page 47



Kodak 5000 Film Processor ShaftsPart No. Description List Price456162 Shaft $24.78458175 Shaft $95.27458207 Shaft $92.26458235 Shaft $92.65458390 Shaft $81.35458391 Shaft $53.23458393 Shaft $126.70472446 Main Drive Shaft $170.245B6092 Dryer Drive Shaft $196.965B6371 Roller Shaft $45.095B6763 Shaft $389.245B6947*5B6763 Shaft $389.24559787 Shaft $88.57914480 Driven Shaft $35.63914482 Shaft $49.40963808 Shaft $64.64968197 Idler Shaft $17.90

Kodak 5000 Film Processor Side PlatesPart No. Description List Price1C7649 Non-Drive Exit Assembly Side Plate $137.36286904 Non-Drive Rack Side Plate $65.77286907 Drive Rack Side Plate $81.07286910 Non-Drive Wash Rack Side Plate $79.04286912 Drive Wash Rack Side Plate $76.99286922 Squeegee Assembly Side Plate $19.63477000 Non-Drive Turnaround Side Plate $12.58477001 Drive Turnaround Side Plate $15.105B6391 Drive Fixer Side Plate $85.555B6392 Non-Drive Fixer Side Plate $43.315B6548*9B8378 Drive Detector Crossover Side Plate $19.745B6549*9B8379 Non-Drive Detector Crossover Side Plate $18.808B7282 Crossover Side Plate $41.509B8378 Drive Detector Crossover Side Plate $19.74911429 Crossover Side Plate $37.04963622 Drive Exit Assembly Side Plate $62.04

Page 48



Kodak 5000 Film Processor SpringsPart No. Description List Price1C7106 Spring $10.20459344*1C7106 Spring $10.20467843 Spring $6.31474645 Spring $6.31562609 Air Tube Spring $4.068B7055 Spring $12.22914807 Spring $10.15968445 Belt Tensioner Spring $19.50

Page 49



Kodak 3000 Film Rack AssembliesPart No. Description List Price5B6575 Wash Rack Assy $1,510.915B6576 Dev/Fix Crossovery Assy $1,019.945B6580 Dryer Rack Assy $3,124.577C8328 Developer Rack Assy $4,215.648B6679 Fixer Rack Assy $2,588.698B6682 Entrance Detector Assy $669.199B8832 Fix/Wash Crossover Assy $786.23

Kodak 3000 Film Processor BearingsPart No. Description List Price1C4395 Bearing $7.155B6527 Rocker Bearing $8.21595426 Bearing $32.52650702 Bearing $13.75650707 Bearing $17.36650710 Bearing $14.92779119*9B8719 Bearing $17.05897205 Thrust Bearing $3.579B8627 Bearing $19.219B8719 Bearing $17.05911684*9B8720 Bearing $16.54914507 Bearing $7.91943663 Bearing $6.73

Kodak 3000 Film Processor ChainsPart No. Description List Price3H8738 Chain $71.07532062 Chain $33.888B7348 Chain $40.839B8951 Chain $33.38914737 Chain $69.65943078*3H8738 Chain $71.07

Page 50



Kodak 3000 Film Processor RollersPart No. Description List Price1C0489 D/F Crossover White Silicone Roller $380.441C7381 Lustran Utility Plastic Black Roller $51.661C7384 Lustran “A” Plastic Black Roller $128.921C7386 Lustran “D” Plastic Black Roller $96.791C7552 Detector Assy Plastic Black Roller $40.23246979 Phenolic Tan Roller $98.04458949 “N” Squeegee Phenolic Tan Roller $168.32467016 “K” Roller $197.33470085 Rubber Crossover Black Roller $208.72474599 “N” Rewet Rubber Black Roller $200.84490108 Entrance Assy Rubber Black Roller $193.48490109 Entrance Assy Rubber Black Roller $193.485B6076 “B” Phenolic Tan Roller $195.645B6406 Stainless Steel “F” Roller $162.505B6407 Rubber “G” Black Roller $117.185B6413 Rubber “F” Black Roller $95.045B6414 Stainless Steel Roller $191.535B6415 Buffed “D” Plastic Black Roller $126.255B6590 Phenolic Tan Roller $104.69536884 “B” Rubber Black Roller $351.16587329 Dryer Phenolic Tan Roller $71.94594237 Crossover Rubber Black Roller $197.396E5838 Absorbent Black Roller $136.607C8476 Stainless Steel Dev Rack Roller $131.767C8477 Dev Rack Rubber Black Roller $194.188B6568 “J” Squeegee Phenolic Tan Roller $151.588B7455 Drive Roller $92.028B7456 Driven Roller $101.269B8087 Squeegee Kit Silicone Roller $238.739B8088 Squeegee Kit Silicone Roller $400.909B8644* 9B86459B8716 Rubber Black Roller $235.549B8662 Phenolic Tan Roller $104.409B8707 Roller $165.649B8715 “H” Roller $268.76911660 Phenolic Tan Roller $89.81

Page 51



Kodak 3000 Film Processor RollersPart No. Description List Price911662*6E5838 Absorbent Black Roller $136.60990014 Phenolic Tan Roller $79.66990015 Phenolic Tan Roller $92.44

Kodak 3000 Film Processor ShaftsPart No. Description List Price1C7366 Shaft $44.55335663 Shaft $123.38458175 Shaft $95.27458207 Shaft $92.26458235 Shaft $92.65458391 Shaft $53.235B6587 Driven Shaft $56.105B6588 Drive Shaft $56.105B6817 Shaft $49.235B6843 Shaft $70.36559787 Shaft $88.57748021 Shaft $61.40748022 Shaft $48.068B6844 Shaft $46.31911653 Shaft $73.24914480 Shaft $35.63981298 Drive Shaft $92.33981299 Shaft $131.08

Kodak 3000 Film Processor Side PlatesPart No. Description List Price1C7255 Side Drive Exit Side Plate $50.781C7256 Side Non-Drive Exit Side Plate $50.781C7630 Side Drive Turnaround Developer Side Plate $17.621C7631 Side Non-Drive Turnaround Developer Side Plate $21.473H8275 Side Drive Dryer Side Plate $38.80477000 Side Non-Drive Turnaround Fixer Side Plate $12.58477001 Side Drive Turnaround Fixer Side Plate $15.105B6593*8B7353 Side Drive Wash Side Plate $20.69

Page 52



Kodak 3000 Film Processor Side PlatesPart No. Description List Price5B6594* 8B73548B7346 Side Non-Drive Wash Side Plate $34.565B6922 Side Drive Fixer Side Plate $29.575B6923 Side Non-Drive Fixer Side Plate $30.585B6924*9B8420 Side Drive Developer Side Plate $103.705B6925 Side Non-Drive Developer Side Plate $87.408B7353 Side Drive Wash Side Plate $20.698B7354* 8B7346 Side Non-Drive Wash Side Plate $34.568B7346 Side Non-Drive Wash Side Plate $34.568B7353 Side Drive Wash Side Plate $20.698B7371 Crossover Side Plate $10.549B8380 Detector Side Plate $23.759B8420 Side Drive Developer Side Plate $103.709B8868 Side Non-Drive Dryer Side Plate $37.399B8869*3H8275 Side Drive Dryer Side Plate $38.80

Kodak 3000 Film Processor SpringsPart No. Description List Price1C7106 Spring $10.201C7107 Spring $13.90459344*1C7106 Spring $10.20467843 Spring $6.31474645 Spring $6.315B6165 Spring $19.32562609 Spring $4.068B6668 Spring $24.959B8625 Spring $5.699B8626 Spring $5.51

Page 53



Kodak 2000 Film Processor Rack AssembliesPart No. Description List Price261276 Fixer/Washer Crossover Assembly $706.10261277 Wash Rack Assembly $2,783.29333795 Developer/Fixer Crossover Assembly $1,514.69333796 Dryer Rack Assembly $3,551.665B6163 Detector Crossover Assembly $603.675E2458 Developer Rack Assembly $1,391.567C8319*5E2458 Developer Rack Assembly $1,391.56748165 Fixer Rack Assembly $2,591.64

Kodak 2000 Film Processor BearingsPart No. Description List Price240060 Bearing $25.36490092 Bearing $10.61532054 Bearing $6.29543993 Bearing $9.01571241 Bearing $6.74595426 Bearing $32.52650701 Bearing $16.22650702 Bearing $13.75650703 Bearing $13.63650707 Bearing $17.36650710 Bearing $14.92

Kodak 2000 Film Processor ChainsPart No. Description List Price458240 Chain $41.59480168 Drive Chain $40.42752731 Drive Chain $20.03

Kodak 2000 Film Processor RollersPart No. Description List Price1C7554 “D” Roller $71.581C7555 Lustran Roller $45.741C7556 Lustran Roller $51.701C7557 Knurled Roller $59.641C7558 Lustran “A” Roller $73.571C7633 “F” Rubber Roller $148.04

Page 54



Kodak 2000 Film Processor RollersPart No. Description List Price1C7640 Rubber “B” Roller Assy Roller $214.49240747 Developer/Fix Crossover Drive Roller $464.68246882 Upper Driven Detector Roller $120.25246883 Drive Detector Roller $138.46246917 Silicone “G” Roller $438.47246918 Silicone “F” Roller $444.14287013*246917 Silicone “G” Roller $438.47287028 “G” Roller $123.37287032 Rewet Roller $159.46287048 Rubber Crossover Drive Roller $156.70287067 Dryer Phenolic Roller $96.74287078 Rubber Roller $132.05287081 Dryer Phenolic Roller $157.00287083 Dryer Phenolic Roller $108.41287656 Dryer w/o Bearing Roller $137.383H4143*3H4198 Roller $135.493H4145*3H4199 Dev Rack Roller $125.963H4198 Roller $135.493H4199 Dev Rack Roller $125.96485406 Silicone Crossover Driven Roller $395.635B6077 “B” Phenolic Roller $110.44748147 Crossover (Phenolic) Driven Roller $114.48

Kodak 2000 Film Processor ShaftsPart No. Description List Price287003 Roller Shaft $54.74287027 Drive Shaft $107.42287037 Shaft $69.65287039 Drive Shaft $190.88287047 Drive Shaft $75.46287079 Upper Roller Shaft $90.32287085 Lower Roller Shaft $34.80287088 Dryer Drive Shaft $34.88482222 Main Drive Shaft $111.70

Page 55



Kodak 2000 Film Processor Side PlatesPart No. Description List Price246879 Detector Crossover Side Plate $12.38264432 Side Non-Drive Side Plate $59.12286910 Non-Drive Side Plate $79.04286912 Drive Side Plate $76.99477000 Drive Side Turnaround Side Plate $12.58477001 Non-Drive Turnaround Side Plate $15.10477005 Side Plate $12.22490123 Drive Side Side Plate $124.80911809 Drive Side Plate $29.57911845 Non-Drive Side Plate $28.92

Kodak 2000 Film Processor SpringsPart No. Description List Price467843 Spring $6.31474645 Spring $6.31479820 Roller Spring $7.30562609 Air Tube Spring $4.06

Page 56



Kodak 270 Film Processor Rack AssembliesPart No. Description List Price696092 Exit Rack $3,685.60696093 Dryer Rack $3,773.37779101*8B6612 Wash Rack $1,661.479B8445 Fix Wash - Crossover $803.16918938 Developer Rack $2,685.52918939 Fixer Rack $2,349.92918943 Detector Crossover $765.46918944 Developer/Fixer Crossover $762.60918945*9B8445 Fix Wash - Crossover $803.16

Kodak 270 Film Processor BearingsPart No. Description List Price182399 Bearing $3.203B7301 Thrust Bearing $6.65594273 Bearing $6.76595426 Bearing $32.52650707 Bearing $17.36779119*9B8719 Bearing $17.05897205 Thrust Bearing $3.579B8719 Bearing $17.05911684* 9B8720 Bearing $16.54943663 Bearing $6.73

Kodak 270 Film Processor ChainsPart No. Description List Price779334 Roller Chain $22.37911727 Drive Chain $31.80914737 62 Pitches, 31 Links Chain $69.65914738 66 Pitches, 33 Links Chain $71.58

Page 57



Kodak 270 Film Processor RollersPart No. Description List Price1C0983*9B8088 Drive Squeegee Roller $400.901C0985*9B8087 Driven Squeegee Roller $238.731C7381 Lustran Utility Roller $51.661C7384 Lustran “A” Roller $128.921C7551 Lustran “D” Roller $103.04246979 Phenolic Roller $98.04335656*9B8088 Squeegee Kit Roller $400.90335657*9B8087 Squeegee Kit Roller $238.73490108 Entrance Assy Roller $193.48490109 Entrance Assy Roller $193.485B6058 Assy. Roller $278.59562330*1C7552 Roller $40.23587329 Dryer Roller $71.94594237 Crossover Roller $197.39594243 Roller $341.98594244* Roller5B6078 Roller $139.64594271 Rewet Roller $179.92594288*1C7551 Lustran “D” Roller $103.04748875*1C7550 Roller $109.889B8087 Driven Squeegee Roller $238.739B8088 Drive Squeegee Roller $400.90911660 Roller $89.81911661*5B6058 Assy. Roller $278.59

Page 58



Kodak 270 Film Processor RollersPart No. Description List Price911662*6E5838 Roller $136.60943441*5B6064 Roller $232.60968796*5B6061 Roller $288.28990014 Roller $79.66990015 Roller $92.44

Kodak 270 Film Processor ShaftsPart No. Description List Price1C4952 Drive Shaft $94.78246981 Squeegee Shaft $86.12246982 Driven Shaft $272.40458175 Shaft $95.27594229 Drive Shaft $106.79594230 Driven Shaft $80.50594236 Roller Shaft $73.10594242 Master Roller Shaft $118.20748021 Gear Shaft $61.40748022 Idle Shaft $48.06911651 Wash Drive Shaft $194.32911653 Roller Shaft $73.24911656 Main Drive Shaft $177.92943468 Shaft $44.84943473 Shaft $50.29968736 Shaft $679.04990019 Idle Shaft $48.44

Kodak 270 Film Processor Side PlatesPart No. Description List Price1C4392* 8B7346 Non-Drive Wash Side Plate $34.56696090 Drive Side Side Plate $34.35696091 Non-Drive Side Side Plate $34.35779070* 1C4392*8B7346 Non-Drive Wash Side Plate $34.56

Page 59



Kodak 270 Film Processor Side PlatesPart No. Description List Price779345*8B7353 Drive Side Wash Side Plate $20.69779431 Non-Drive Side Developer Side Plate $50.04779432 Drive Side Developer Side Plate $46.80779433*9B8380 Drive Side Detector Crossover Side PlateKit $23.75779434*9B8380 Non-Drive Side Detector Crossover Side Plate Kit $23.75779435 Crossover Side Plate $8.008B7353 Drive Side Wash Side Plate $20.699B8653*7C8712 Drive Side Side Plate Mod Kit N/A943466 Non-Drive Side Fixer Side Plate $52.87943467 Drive Side Fixer Side Plate $49.38990002* 9B8653*7C8712 Drive Side Side Plate Mod Kit N/A990033* 9B8653*7C8712 Non-Drive Side Side Plate Mod Kit N/A

Kodak 270 Film Processor SpringsPart No. Description List Price1C7106 Spring $10.201C7107 Spring $13.90246580 Spring $26.42467843 Spring $6.31562500 Spring $5.85

Page 60



Kodak 180 Film Processor Rack AssembliesPart No. Description List Price5B6890 Wash Rack Assembly $1,312.448B7369*9B8086 Dryer Rack Assembly $3,122.068B6577 Exit Rack Assembly $1,371.369B8086 Dryer Rack Assembly $3,122.069B8445 Fixer/Wash Crossover Assembly $803.16918943 Detector Crossover Assembly $765.46918945*9B8445 Fixer/Wash Crossover Assembly $803.16981297 Fixer Rack Assembly $1,963.13990338 Developer/Fixer Crossover Assembly $716.69990339 Developer Rack Assembly $2,602.53990341*8B6577 Exit Rack Assembly $1,371.36

Kodak 180 Film Processor BearingsPart No. Description List Price182399 Bearing $3.203B7301 Thrust Bearing $6.65594273 Bearing $6.76595426 Bearing $32.52650707 Bearing $17.36779119*9B8719 Bearing $17.05897205 Thrust Bearing $3.57911684*9B8720 Bearing $16.54

Kodak 180 Film Processor ChainsPart No. Description List Price779334 Roller Chain $22.37914737 Chain $69.65943078*3H8738 Ladder Chain $71.07943393 Drive Chain $27.20

Page 61



Kodak 180 Film Processor RollersPart No. Description List Price1C7381 Lustran Utility Roller Assembly $51.661C7550 Roller Assembly $109.881C7551 Lustran “D” Roller Assembly $103.041C7552 Roller Assembly $40.23246679*246979 Phenolic Roller Assembly $98.04458949 “N” Squeegee Roller Assembly $168.32489693*1C7381 Lustran Utility Roller Assembly $51.66490108 Entrance Assy Detector “B” Roller $193.48490109 Entrance Assy Detector “A” Roller $193.485B6058 Roller Assembly $278.595B6061 Roller Assembly $288.285B6078 Roller Assembly $139.645B6568*458949 Roller Assembly $168.325B6590 Roller Assembly $104.69562330*1C7552 Roller Assembly $40.23587329 Dryer Roller Assembly $71.94594237 Crossover Roller Assembly $197.39594243 Roller Assembly $341.98594244*5B6078 Roller Assembly $139.64594271 Rewet Roller Assembly $179.92594288*1C7551 Lustran “D” Roller Assembly $103.04748875*1C7550 Roller Assembly $109.888B6568 Squeegee “J” Roller Assembly $151.588B7110 Drive Squeegee Roller Assembly $283.848B7111 Driven Squeegee Roller Assembly $273.98911660 Roller Assembly $89.81911661*5B6058 Roller Assembly $278.59911662*6E5838 Roller Assembly $136.60

Page 62



Kodak 180 Film Processor RollersPart No. Description List Price968796*5B6061 Roller Assembly $288.28990014 Roller Assembly $79.66990015 Roller Assembly $92.44

Kodak 180 Film Processor ShaftsPart No. Description List Price1C4951 Drive Shaft $73.501C7366 Drive Shaft $44.55458175 Shaft $95.275B6587 Idle Shaft $56.105B6588 Driven Shaft $56.105B6817 Idler Roller Shaft $49.23594229 Drive Side Shaft $106.79594230 Driven Shaft $80.50594236 Shaft $73.10594242 Master Roller Shaft $118.20748021 Gear Shaft $61.40748022 Idle Shaft $48.06911653 Roller Shaft $73.24943468 Shaft $44.84943473 Shaft $50.29981298 Drive Shaft $92.33981299 Shaft $131.08990022 Shaft $42.86

Kodak 180 Film Processor Side PlatesPart No. Description List Price5B6548*9B8378 Drive Detector Crossover Side Plate Kit $19.745B6549*9B8378 Non-Drive Detector Crossover Side Plate Kit $19.74779431 Non-Drive Developer Rack Side Plate $50.04779432 Drive Developer Rack Side Plate $46.80779435 Crossover Side Plate $8.008B6560 Drive Dryer Rack Side Plate $64.058B6561 Non-Drive Dryer Rack Side Plate $91.358B7353 Drive Wash Rack Side Plate $20.69

Page 63



Kodak 180 Film Processor Side PlatesPart No. Description List Price8B7354*8B7346 Non-Drive Wash Rack Side Plate $34.569B8378 Drive Detector Crossover Side Plate $19.74943466 Non-Drive Side Fixer Rack Side Plate $52.87943467 Drive Side Fixer Rack Side Plate $49.38981293* 9B86547C8712 Dryer Rack Side Plates Mod Kit N/A981294*7C8712 Dryer Rack Side Plates Mod Kit N/A

Kodak 180 Film Processor SpringsPart No. Description List Price1C7106 Extension Spring $10.201C7107 Extension Spring $13.90467843 Spring $6.31562500 Spring $5.85562609 Air Tube Spring $4.06

Page 64


M35A/AM and 2000A

Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor Assembly

Part Number 240227 990403 (110v) 779519 (M35A-M) 240225

List Price $1,284.59 $952.86 $979.42 $224.70

Part Number 246839 (110v) (M35A & 2000A)

List Price $632.06

M35/m and 2000 Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 651861 (230v) 990402 (230v) 651863 651864

List Price $1,357.92 $864.16 $402.54 $875.18

Min-R Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 651861 990402 651863 2E4249

List Price $1,357.92 $864.16 $402.54 $838.07

M7/A/B Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 594760 418709 8B6920 594762

List Price 835.76 $543.80 $1,259.26 $627.57

180LP Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 1C4593 1C4594 7C8474 748638

List Price $1,102.80 $1,129.09 $970.41 $989.80

270RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 1C4593 1C4594 779325 (gear box) 748638

List Price $1,102.80 $1,129.09 $493.32 $989.80

Part Number 955703 (Motor)

List Price $615.00

3000RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 1C4593 1C4594 1C4591 (gear box) 9B8251

List Price $1,102.80 $1,129.09 $293.22 $675.28

Part Number 1C4589 (Motor)

List Price $439.56

M6AN/AW Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 914429 418702 3H4475 (60 hz.) 748683

List Price $1,205.30 $1,055.98 $924.48 $673.44

M6B (serial numbers below 10,000) Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 914429 622017 655658 748683

List Price $1,205.30 $1,169.86 $1,799.18 $673.44

M6B (serial numbers above 10,000) Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 333659 914491 333658 9B8359

List Price $670.84 $875.58 $1,178.17 $831.65

460RA & 480RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 943211 914491 779325 (gear box) 9B8359

List Price $1,397.36 $875.58 $493.32 $831.65

Part Number 955703 (motor 460, 480)

List Price $615.00

Part Number 963960 (cable needed for 460)

List Price $300.00

5000RA Replenishment Pump Recirculation Pump Main Drive Motor Blower Motor AssemblyPart Number 5B6353 5B6352 5B6376 8B6625

List Price $887.98 $836.36 $1,019.53 $1,549.28

Parts - Pumps and Motors

Page 65


38 Saginaw Drive, Suite B, Rochester, New York 14623(585) 594-1000

www.imtechimaging.com

Documents

KODAK Sept2009IMcatalog