Upload
vantuong
View
222
Download
2
Embed Size (px)
Citation preview
KNR is fully equipped office with all required
software packages for design and engineering
services for Substation and Transmission line.
KNR has the distinct experience of working with
reputed consulting organization namely PGCIL,
NTPC, DCPL, MECON, TCS, FICHTNER,
VOLTECH & AVANTI-GARDE.
KNR has over 26 qualified engineering
professionals.
KNR has an exclusive team of High Voltage
Engineering professionals to carry-out Insulation
Coordination study for EHV GIS substation using
EMTP-RV / MICROTRAN 3.22 software packages
from Powersys - France.
KNR has built up an impressive client base since
inception.
KNR's key personnel have worked in GCC and
are conversant with the codes of practice of West
Asian countries.
KNR has a power system study group to handle
load flow, short circuit, transient stability,
Grounding design using ETAP and harmonic
analysis.
KNR has built up an impressive client base which
includes all giants of Power industry during the last
13 years.
KNR owes its reputation for technical excellence
coupled with problem solving skills of professional
team of engineers.
Overhead Distribution lines up to 33kV
Overhead Transmission lines up to 765kV
KNR Engineers & Consultants was
established in 2003 and converted into Pvt
Limited in 2008. KNR has an exclusive team
of experts and engineering professionals lead
by Mr. N.K. Nathan from Esquire Engineers &
Consultants, unit of Best & Crompton
Engineering Ltd.
KNR has grown in size and strength to
undertake Design & Engineering work for
large T&D projects upto 765kV and Industrial
power systems.
Gas insulated substations upto 765kV
voltage class
KNR has completed over 250 assignments
since inception.
KNR offers the following services for
Transmission and Distribution projects.
Design & Detail engineering for EHV substations
and transmission lines upto 765kV.
Gas Insulated substation
Power system studies.
Insulation Co-ordinations studies.
Owner engineering services for EHV substations
Wind & Solar power
Infrastructure sector
Desalination plants (RO & MSF) sea water intake
systems
SERVICES IN DETAIL
GAS INSULATED SUBSTATION
ELECTRICAL
Review of schemes & selection
Protection SLD
Technical specification for Gas Insulated
Switchgear
Analysis & selection of bay width &
depth
Plot plan for GIS
Interface connection and take off
arrangement
GIS layout
Transformer yard layout
Grounding design of GIS substation using
CDEGS as per CIGRE-44
Lightning protection.
Indoor-outdoor lighting
Ventilation system
CIVIL AND STRUCTURAL
Analysis between PEB and RCC
building
Economic selection of width of
GIS building
Study of soil investigation report
Design of GIS building columns
and beams
Selection of foundation type
Design of foundation
Architectural drawings
Floor & roof slab design
Crane corbel beam design
SUBSTATION DETAIL
ENGINEERING
KNR has done over 250 assignments of
detailed engineering services for
substations up to 765kV for national and
overseas clients
ELECTRICAL
Protection and Metering SLD
Substation Layout Plan and
Sections
Substation Clearance Diagram
Erection Key Diagram
Earthing & Lightning Protection
Lighting System Design.
CIVIL AND STRUCTURAL
Foundation Design and
Engineering
Structure Design and Engineering
Control Room Building Design
and Engineering
Lightning & Lighting Mast
Foundation and Cable Trench
Layout
Storm Water Drainage System
STADD Analysis Report.
Foundation Design and Drawing for all
types of soil
Tower Drawing, Elevation & Clearance
Drawing
Sag Tension Chart - Mathematical
Optimization
Technical Support for testing of
Transmission Line Tower at Recognized
Testing Centre
Transmission Line Bill Of Materials
Cable Routing and Schedule
Control Room Equipment Layout
Structural loading layout
Battery and LVAC System
CT & PT sizing calculation
SCADA System
Project Bill Of Materials
TRANSMISSION LINE DESIGN AND
DETAILED ENGINEERING SERVICES:
KNR offers complete range of consulting services
for Transmission Line projects.
Transmission Line Route Survey
Tower Spotting
Conductor Sizing
Single Line Diagram
Transmission Line Design to 'ROW'
Constraints
Road, Drain and Duct Bank
Transformer and Reactor Foundation
Transformer Fire Wall and Soak Pit
Project Bill Of Materials
INSULATION COORDINATION
STUDIES
KNR has done over 20 assignments of
insulation coordination study for gas insulated
substations up to 400kV for national and
overseas clients.
WIND POWER
ELECTRICAL
Equipment Selection
Protection and Metering SLD
Unit Substation (USS) & Package
Substation (PSS)
Skid mounted substation layout
Substation Layout Plan and Sections
Substation Clearance Diagrams
Erection Key Diagram
Earthing for WTGs
Earthing & Lightning Protection
Lighting System Design
MV & LV Cable sizing, routing
layout and schedule
Control Room Equipment Layout
Battery and LVAC System
SCADA System
Project Bill Of Materials
Cost estimate
POWER SYSTEM STUDIES
KNR has done over 14 assignments of system
studies for AIS & GIS substations up to 400kV
for national and overseas clients.
Using ETAP 12.0 Software Package, Power
system studies covering the following have
been carried out
Short Circuit studies
Transient Stability
Relay Co-ordination
Load Flow studies
Dynamic Stability
Motor starting Analysis
Harmonic Analysis
KNR recently completed a
Transient stability study for a 220kV
system fed by 4x210MW generator
plus 5X45 MW generators in GUP-
ABUDHABI
Using EMTP package EMTP-RV from
Powersys, insulation co-ordination study for
lightning and switching over voltage
performance is being carried out.
CIVIL AND STRUCTURAL
Foundation Design and
Engineering for PV panels,
equipment & tower
Structure Design and Engineering
for PV panels, equipment &
tower
Control Room Building Design
and Engineering
Lightning & Lighting Mast
Foundation and Cable Trench
Layout
Storm Water Drainage System
Road, Drain, Duct
Transformer Foundation
Transformer Fire Wall and Soak
Pit
Project Bill Of Materials
PV SOLAR POWER
ELECTRICAL
Equipment Selection
Protection and Metering SLD
Sizing of String & Inverter
Design and layout for PV solar panels,
junction boxes and inverter
Substation Layout Plan and Sections
Substation Clearance Diagrams
Erection Key Diagram
Earthing for WTGs
Earthing & Lightning Protection
Lighting System Design
MV & LV Cable sizing, routing layout
and schedule
Control Room Equipment Layout
Battery and LVAC System
SCADA System
Project Bill Of Materials
Cost estimate
CIVIL AND STRUCTURAL
Foundation Design and Engineering
Structure Design and Engineering
Control Room Building Design and
Engineering
Lightning & Lighting Mast
Foundation and Cable Trench Layout
Storm Water Drainage System
Road, Drain, Duct
Transformer Foundation
Transformer Fire Wall and Soak Pit
Project Bill Of Materials
OFFICE
450 sq.m well equipped office located in
Chennai central district about 8 kms from the
international airport.
HARDWARE
KNR has a well equipped engineering office with
11 CADD workstations networked with required
software packages to extend turnkey consulting
services for T & D projects:
1 - Plotter HP Design Jet T120 capable
of printing up to A1.
1 - Scanner/Printer/Xerox HP M5025.
1 - Samsung Laser Printer ML2550.
1- Canon LBP6200 printer.
3 - Broad band Internet connections.
SOFTWARE DETAILS
AutoCAD 2012
AutoCAD LT
EMTP-RV3.4
BRICSCAD 2014
MICROTRAN 3.22
ETAP 12.0
• LOAD FLOW
• SHORT CIRCUIT
• TRANSIENT STABILITY
LIBRARY
KNR has a dedicated library that
comprises books and journals in
electrical domain.
Indian standards, IEC, IEEE Std.
JSA, BS, SABS & relevant to
Design & Engineering of EHV
substation, Transmission line.
Technical Hand books of TNEB,
KSEB, TL EPRI and other
utilities.
Central Board of Irrigation
Power (CBIP) Manual on
substation layout and
specifications
Hand books of ABB, Siemens,
RCC and Steel Structure Design
Book & Technical Hand Book
for Power Distribution, etc.,
Over 200 Technical Books on
Power, Transmission,
Distribution and utilization.
Knowledge Document of the
project done by KNR is
Securely Stored in (cloud) for
Convenient Retrieval any time
from anywhere.
Nano CAD
STADD PRO
STADD PRO ANSI
STADD PRO Foundation
Access to CDEGS & CYME