Upload
others
View
18
Download
0
Embed Size (px)
Citation preview
Table of Contents
Introduction Knoll and Sustainable Design 3
Knoll Color Program Finishes 4
Dividends Legacy Finishes 6
Dividends Horizon Fabrics 7
Panels, Pre-Configured Monolithic Panels 8
Tiled Panels 16
Beltway Panels 32
Panels, Build-To-Spec Topway and Full View Panel Frame Assemblies 37
Base Raceway Covers 40
Stack Frames 41
Monolithic Panel Fabric Inserts 43
Monolithic Laminate Inserts 46
Tiled Fabric Inserts 50
Tiled Laminate Inserts 53
Beltway Inserts 55
High Acoustic Core Inserts 59
Window Insert Kits 60
Markerboard Tiles 61
Steel Insert Kits 63
Slatwall Tiles 72
Freestanding Foot 73
Rolling Door 74
Glass Screens 76
Glass Stacking Screens 81
Standard Frameless Add Up 84
Recessed Frameless Add Up 86
Post Connectors/End Trim Dividends Horizon DP8 Post Assemblies 93
Dividends Horizon DP8 Post Components 95
Panel End Trim and Panel Top Caps 101
Panel Wall Starter, Panel-to-Panel Top Cap Transition 109
Wall Mount Tracks and Components 110
Coat Hooks and Reveal Fillers 112
Alternative Planning Universal Gallery Panels 114
Concealed Post 126
120° Planning 149
Electrical/Data Components Base Raceway Electrical 153
Receptacles 155
Vertical Electrical 158
Double Verical Electrical 160
Desktop Power and Data Modules 161
Beltway Electrical 167
Electrical Infeeds and Power Poles 169
Electrical Infeeds 172
New York City, San Francisco and Chicago Electrical 173
Cable Management 175
Storage Components Flip-Up Door Overheads 177
Sliding Door Overheads 179
Up Mounted Overheads 189
Overhead Bookshelf 190
Mounting Brackets and Accessories 191
Task Lights 193
Pedestals 194
Credenzas 198
Flip-up Door Overdesk and Tackboards 209
Sliding Door Overdesks 211
Sliding Door Overdesks with Tackboard 219
Dividends Horizon
PLDH03221
Copyright Q 2022 Knoll, Inc.All rights reserved.All prices effective 02/15/2022.
Worksurfaces Rectangular Worksurfaces 229
Curvilinear Wave End Worksurfaces 234
Smooth Wave Worksurfaces 235
Faceted Worksurfaces 236
Trapezoidal Worksurfaces 238
Corner Worksurfaces 239
Peninsula Worsurfaces 243
Curvilinear Half- and Corner-Round Worksurfaces 246
Transaction Counter Worksurfaces 247
Postformed Postformed Worksurfaces, 1 3/49 248
Postformed Worksurfaces, 1 1/49 254
Postformed Options worksurfaces 1 1/49 265
Worksurface Supports andScreens
Panel Mounted Worksurface Brackets 275
Network Privacy screens 279
Screen-to-Worksurface Brackets 283
Universal Modesty Panel, steel 284
Universal Modesty Panel, fabric 285
Univeral Privacy Screen, fabric and fabric w/79 slatwall 286
Univeral Privacy Screen, steel 287
Univeral Privacy Screen, fabric 290
Univeral Privacy Screen, fabric and fabric w/79 or 149 slatwall 291
Panel Mounted Worksurface Supports 292
Peninsula Worksurface Supports 293
Tables Y Leg Tables 294
X Base Tables 300
Wall Mounting of Knoll Products 301
Alpha-Numeric Index 303
Selling Policy 318
KnollKey Lock Program 321
General Ordering Information 322
Dividends Horizon
2
Knoll and Sustainable Design
Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports material
health product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our North
American facilities.)
Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.
Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation for
industry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.
Knoll certifications include: Forest Stewardship Council (FSCt), Intertek’s Clean Air Program, Business and Institutional Furniture
Manufacturer’s Association (BIFMA) LEVELt certification, International Living Future Institute’s (ILFI) Declare labelling and Certified
Environmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizations
achieve credits for Leadership in Energy and Environmental Design (LEEDt), WELL and the Living Building Challenge (LBC) building
certifications.
In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO
14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-term
strategy to further reduce energy consumption and lower our carbon footprint.
We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s Full
Circle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options for
repurposing or recycling that mitigate landfill impact through energy-from-waste conversion.
For more information about Knoll and sustainable design, visit www.knoll.com/environment.
3
Order Code Color NameOld Order Code
Paint Grade
Paint Finishes
Laminate Finishes
2mm Edgeband Finishes
Cascade Worksurface Finishes
Techwood Finishes
Plastic Trim Finishes
149 Barnwood • •
611T* Beige Mist Metallic P2 •
120T Black Brown P1 •
118T* Bright White LH P1 • • • •
112T* Brown P1 •
123 Brushed Grey •
122 Brushed Sand •
143 Classic Oak • •
113T* Dark Grey Y3 P1 • • •
128 Fog G • •
114T* Folkstone Grey P1 • • • •
144 Graphite Pear • •
142 Grey Ash • •
111T* Jet Black 27 P1 • • •
139 Light Ash • •
124 Medium Cherry • • •
115 Medium Grey • •
115T* Medium Grey Y2 P1 • •
612T* Medium Metallic Grey J P2 •
121 Micro Grey •
129 Micro Sand •
126 Natural Cherry • • •
125 Natural Maple • • •
119 Pumice LB, F • • •
116T* Sandstone P1 •
613 Silver 3 P3 •
147 Silverwood • •
148 Smokewood • •
117T* Soft Grey E, M42 P1 • • • • •
127 Walnut • • •
140 Warm Ash • •
141 Whitened Ash • •
145 Zebra • •
Paints and Laminates
* T suffix is for paint finish only
Knoll Color Program Finishes Dividends Horizon
5
Most products introduced
after 2004 are not available in
Legacy finishes. See individual
pricing pages for availability.
Specify Legacy finishes to match
existing product only. Legacy finishes
are not available for new customers.
Trim Finishes
Panel top caps
Panel post trim
Pedestal drawer top caps
Overhead drawer top caps
Pedestal drawer pulls
Y1 Pewter
Paint Finishes
Panel base raceway covers
Panel tiled insert supports
Solid Steel panel inserts
Perforated steel panel inserts
Embossed steel panel inserts
Overhead storage components
Pedestals
Desk components
Metal panel topcaps and trim
P1 Finishes
Y1 Pewter
P2 Finishes
H Beige Metallic
W Light Tan Metallic
All other Knoll paint finishes and custom
finishes (Series 2 components only)
Laminates
Worksurfaces
An upcharge applies where specifying
Legacy laminates. Add an amount
equal to 10% of the solid PVC
edgeband list price to the price
of any product specified with a
Legacy laminate.
MC Caramel Maple
CM Clear Maple
M1 Light Grey
PA Pearwood
SD Sand
B Snow
WM Warm Cherry
MR6 Winter Grey Matrix
Note: Laminates and other finishes may
vary in color due to different dye lots.
Slight variations are to be expected.
Worksurface Edges
2mm edgeband
MC Caramel Maple
Y3 Dark Grey
Y2 Medium Grey
MT Metal
Y1 Pewter
SD Sand
B Snow
WM Warm Cherry
Order Code Color NameOld Order Code
Paint Grade
Paint Finishes
Laminate Finishes
2mm Edgeband Finishes
Cascade Worksurface Finishes
Techwood Finishes
Plastic Trim Finishes
DS1 Storage Plastic Finishes
Techwoods
641 Black Oak •
638 Blond Maple (formerly
known as maple techgrain)•
509 Cherry •
628 Dark Mahogany •
514 Espresso •
639 Light Cherry (formerly
known as cherry techgrain)•
506 Maple •
513 Medium Teak •
512 Medium Walnut •
637 Natural •
644 Light Walnut •
645 Dove Grey •
Gloss Level Fill Level
A Low Gloss Closed Pore
B Medium Gloss Closed Pore
C High Gloss Closed Pore
D Low Gloss Open Pore
E Medium Gloss Open Pore
F High Gloss Open Pore
Edge Options for Veneers
WOOD Complimentary Wood
SYN Complimentary Synthetic
WPLY Wood Ply Edge*
SPLY Synthetic Ply Edge*
For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com
Dividends Legacy Finishes Dividends Horizon
6
Monolithic PanelsStandard Base RacewayWorksurface Height and 369 High
description h w d pattern no.grade
10 20 30 40
Worksurface HeightMonolithic Standard BaseRaceway
28 1/29 159 39 DP8CMMRRWH15 $584. $629. $656. $673.
28 1/29 189 39 DP8CMMRRWH18 584. 629. 656. 673.
28 1/29 249 39 DP8CMMRRWH24 648. 697. 723. 747.
28 1/29 309 39 DP8CMMRRWH30 678. 729. 759. 782.
28 1/29 369 39 DP8CMMRRWH36 759. 817. 853. 881.
28 1/29 429 39 DP8CMMRRWH42 838. 904. 941. 974.
28 1/29 489 39 DP8CMMRRWH48 884. 949. 992. 1,029.
28 1/29 609 39 DP8CMMRRWH60 1,054. 1,131. 1,184. 1,225.
28 1/29 729 39 DP8CMMRRWH72RR* 1,330. 1,429. 1,496. 1,548.
28 1/29 849 39 DP8CMMRRWH84RR* 1,384. 1,484. 1,555. 1,610.
28 1/29 969 39 DP8CMMRRWH96RR* 1,439. 1,544. 1,618. 1,673.
369 High, MonolithicStandard BaseRaceway
35 1/89 159 39 DP8CMMRR3615 584. 629. 656. 673.
35 1/89 189 39 DP8CMMRR3618 584. 629. 656. 673.
35 1/89 249 39 DP8CMMRR3624 648. 697. 723. 747.
35 1/89 309 39 DP8CMMRR3630 678. 729. 759. 782.
35 1/89 369 39 DP8CMMRR3636 759. 817. 853. 881.
35 1/89 429 39 DP8CMMRR3642 838. 904. 941. 974.
35 1/89 489 39 DP8CMMRR3648 884. 949. 992. 1,029.
35 1/89 609 39 DP8CMMRR3660 1,054. 1,131. 1,184. 1,225.
35 1/89 729 39 DP8CMMRR3672RR* 1,221. 1,311. 1,372. 1,419.
35 1/89 849 39 DP8CMMRR3684RR* 1,398. 1,499. 1,571. 1,625.
35 1/89 969 39 DP8CMMRR3696RR* 1,453. 1,560. 1,634. 1,690.
Dimensions listed under h w d are actual to the nearest 1/169
* RR = Pattern only available with railroaded fabric
Ordering Information
Monolithic Panel with StandardBase Raceway:
1. Pattern number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway trim finish6. Panel fabric
Order Code
Monolithic Panel Standard BaseRacewayExample: DP8CMMRR3618
4/117/K/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
RR Base Raceway
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
B191 Fairfield fabric
Included with:
Monolithic Panel with StandardBase Raceway:
• Panel frame• Acoustic panel inserts (2)• Base raceway covers• Top cap• Connection hardware
Note: Preconfigured WorksurfaceHeight panels are not available withplastic top caps.
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers.
Note: Frames larger than 729 wideship knock down with two panels toachieve the 729 width.
Options
Monolithic Panel with StandardBase Raceway Options:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’, No upcharge.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Options:(K) = Knockouts both side(N) = No Knockouts
Dividends Horizon
8
Monolithic PanelsStandard Base Raceway429 and 509 High
description h w d pattern no.grade
10 20 30 40
429 High, MonolithicStandard BaseRaceway
42 3/169 159 39 DP8CMMRR4215 $607. $656. $682. $707.
42 3/169 189 39 DP8CMMRR4218 607. 656. 682. 707.
42 3/169 249 39 DP8CMMRR4224 656. 706. 734. 755.
42 3/169 309 39 DP8CMMRR4230 713. 768. 804. 828.
42 3/169 369 39 DP8CMMRR4236 776. 834. 875. 900.
42 3/169 429 39 DP8CMMRR4242 853. 917. 955. 990.
42 3/169 489 39 DP8CMMRR4248 902. 968. 1,011. 1,044.
42 3/169 609 39 DP8CMMRR4260 1,071. 1,153. 1,205. 1,244.
42 3/169 729 39 DP8CMMRR4272RR* 1,354. 1,454. 1,524. 1,571.
42 3/169 849 39 DP8CMMRR4284RR* 1,409. 1,514. 1,584. 1,634.
42 3/169 969 39 DP8CMMRR4296RR* 1,465. 1,573. 1,647. 1,701.
509 High, MonolithicStandard BaseRaceway
49 1/29 159 39 DP8CMMRR5015 648. 697. 723. 747.
49 1/29 189 39 DP8CMMRR5018 648. 697. 723. 747.
49 1/29 249 39 DP8CMMRR5024 700. 748. 779. 806.
49 1/29 309 39 DP8CMMRR5030 767. 823. 861. 887.
49 1/29 369 39 DP8CMMRR5036 838. 904. 941. 974.
49 1/29 429 39 DP8CMMRR5042 920. 990. 1,035. 1,065.
49 1/29 489 39 DP8CMMRR5048 991. 1,064. 1,110. 1,145.
49 1/29 609 39 DP8CMMRR5060 1,177. 1,267. 1,321. 1,368.
49 1/29 729 39 DP8CMMRR5072RR* 1,487. 1,601. 1,671. 1,729.
49 1/29 849 39 DP8CMMRR5084RR* 1,548. 1,664. 1,737. 1,799.
49 1/29 969 39 DP8CMMRR5096RR* 1,610. 1,733. 1,806. 1,870.
Dimensions listed under h w d are actual to the nearest 1/169
* RR = Pattern only available with railroaded fabric
Ordering Information
Monolithic Panel with StandardBase Raceway:
1. Pattern number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway trim finish6. Panel fabric
Order Code
Monolithic Panel Standard BaseRaceway
Example: DP8CMMRR36184/117/K/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
RR Base Raceway
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
B191 Fairfield fabric
Included with:
Monolithic Panel with StandardBase Raceway:
• Panel frame• Acoustic panel inserts (2)• Base raceway covers• Top cap• Connection hardware
Note: Preconfigured WorksurfaceHeight panels are not available withplastic top caps.
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers.
Note: Frames larger than 729 wideship knock down with two panels toachieve the 729 width.
Options
Monolithic Panel with StandardBase Raceway Options:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’, No upcharge.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Options:(K) = Knockouts both side(N) = No Knockouts
Dividends Horizon
9
Pan
els,
Pre
-Con
figur
ed
Monolithic PanelsStandard Base Raceway579, 649 and 789 High
description h w d pattern no.grade
10 20 30 40
579 High, MonolithicStandard BaseRaceway
56 13/169 159 39 DP8CMMRR5715 $701. $748. $781. $807.
56 13/169 189 39 DP8CMMRR5718 701. 748. 781. 807.
56 13/169 249 39 DP8CMMRR5724 751. 807. 840. 870.
56 13/169 309 39 DP8CMMRR5730 829. 890. 931. 959.
56 13/169 369 39 DP8CMMRR5736 904. 970. 1,014. 1,048.
56 13/169 429 39 DP8CMMRR5742 980. 1,054. 1,100. 1,135.
56 13/169 489 39 DP8CMMRR5748 1,052. 1,133. 1,181. 1,221.
56 13/169 609 39 DP8CMMRR5760 1,184. 1,277. 1,332. 1,377.
649 High, MonolithicStandard BaseRaceway
64 1/169 159 39 DP8CMMRR6415 744. 801. 832. 864.
64 1/169 189 39 DP8CMMRR6418 744. 801. 832. 864.
64 1/169 249 39 DP8CMMRR6424 801. 860. 892. 927.
64 1/169 309 39 DP8CMMRR6430 887. 953. 994. 1,030.
64 1/169 369 39 DP8CMMRR6436 963. 1,037. 1,080. 1,115.
64 1/169 429 39 DP8CMMRR6442 1,034. 1,110. 1,158. 1,199.
64 1/169 489 39 DP8CMMRR6448 1,107. 1,191. 1,244. 1,286.
64 1/169 609 39 DP8CMMRR6460 1,321. 1,426. 1,486. 1,536.
789 High, MonolithicStandard BaseRaceway
78 9/169 159 39 DP8CMMRR7815 1,041. 1,118. 1,175. 1,206.
78 9/169 189 39 DP8CMMRR7818 1,041. 1,118. 1,175. 1,206.
78 9/169 249 39 DP8CMMRR7824 1,141. 1,235. 1,286. 1,329.
78 9/169 309 39 DP8CMMRR7830 1,238. 1,329. 1,392. 1,436.
78 9/169 369 39 DP8CMMRR7836 1,345. 1,448. 1,516. 1,566.
78 9/169 429 39 DP8CMMRR7842 1,454. 1,574. 1,638. 1,695.
78 9/169 489 39 DP8CMMRR7848 1,550. 1,673. 1,747. 1,806.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Monolithic Panel with StandardBase Raceway:
1. Pattern number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway trim finish6. Panel fabric
Order Code
Monolithic Panel Standard BaseRaceway
Example: DP8CMMRR36184/117/K/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
RR Base Raceway
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
B191 Fairfield fabric
Included with:
Monolithic Panel with StandardBase Raceway:
• Panel frame• Acoustic panel inserts (2)• Base raceway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Monolithic Panel with StandardBase Raceway Options:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’, No upcharge.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Options:(K) = Knockouts both side(N) = No Knockouts
Dividends Horizon
10
Monolithic PanelsOpen BaseWorksurface Height, 369, 429 and 509 High
description h w d pattern no.grade
10 20 30 40
Worksurface Height,Monolithic Open Base
28 1/29 189 39 DP8CMMLLWH18 $587. $633. $659. $677.
28 1/29 249 39 DP8CMMLLWH24 651. 701. 726. 751.
28 1/29 309 39 DP8CMMLLWH30 681. 733. 762. 785.
28 1/29 369 39 DP8CMMLLWH36 762. 822. 857. 886.
28 1/29 429 39 DP8CMMLLWH42 843. 909. 945. 978.
28 1/29 489 39 DP8CMMLLWH48 889. 954. 997. 1,033.
28 1/29 609 39 DP8CMMLLWH60 1,058. 1,136. 1,189. 1,231.
369 High, MonolithicOpen Base
35 1/89 189 39 DP8CMMLL3618 587. 633. 659. 677.
35 1/89 249 39 DP8CMMLL3624 651. 701. 726. 751.
35 1/89 309 39 DP8CMMLL3630 681. 733. 762. 785.
35 1/89 369 39 DP8CMMLL3636 762. 822. 857. 886.
35 1/89 429 39 DP8CMMLL3642 843. 909. 945. 978.
35 1/89 489 39 DP8CMMLL3648 889. 954. 997. 1,033.
35 1/89 609 39 DP8CMMLL3660 1,058. 1,136. 1,189. 1,231.
429 High, MonolithicOpen Base
42 3/169 189 39 DP8CMMLL4218 611. 659. 684. 711.
42 3/169 249 39 DP8CMMLL4224 659. 710. 737. 758.
42 3/169 309 39 DP8CMMLL4230 716. 772. 807. 832.
42 3/169 369 39 DP8CMMLL4236 779. 838. 879. 904.
42 3/169 429 39 DP8CMMLL4242 857. 922. 959. 994.
42 3/169 489 39 DP8CMMLL4248 906. 972. 1,015. 1,049.
42 3/169 609 39 DP8CMMLL4260 1,077. 1,158. 1,210. 1,250.
509 High, MonolithicOpen Base
49 1/29 189 39 DP8CMMLL5018 651. 701. 726. 751.
49 1/29 249 39 DP8CMMLL5024 703. 752. 782. 810.
49 1/29 309 39 DP8CMMLL5030 771. 826. 866. 891.
49 1/29 369 39 DP8CMMLL5036 843. 909. 945. 978.
49 1/29 429 39 DP8CMMLL5042 924. 994. 1,040. 1,070.
49 1/29 489 39 DP8CMMLL5048 996. 1,069. 1,115. 1,151.
49 1/29 609 39 DP8CMMLL5060 1,183. 1,273. 1,328. 1,375.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Monolithic Panel with Open Base:
1. Pattern Number2. Top cap type3. Top cap finish4. Base finish5. Panel fabric
Order Code
Monolithic Panel with Open Base
Example: DP8CMMLL 36184/117/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
LL Open base
4 Radius Metal top cap
117 Soft Grey top cap finish
117 Soft Grey raceway finish
B191 Fairfield light fabric
Included with:
Monolithic Panel with Open Base:
• Panel frame• Acoustic panel inserts (2)• Open base• Top cap• Connection hardware
Note: Preconfigured WorksurfaceHeight panels are not available withplastic top caps.
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers.
Options
Monolithic Panel with Open Base:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Dividends Horizon
11
Pan
els,
Pre
-Con
figur
ed
Monolithic PanelsOpen Base579, 649 and 789 High
description h w d pattern no.grade
10 20 30 40
579 High, MonolithicOpen Base
56 13/169 189 39 DP8CMMLL5718 $701. $748. $781. $807.
56 13/169 249 39 DP8CMMLL5724 751. 807. 840. 870.
56 13/169 309 39 DP8CMMLL5730 829. 890. 931. 959.
56 13/169 369 39 DP8CMMLL5736 904. 970. 1,014. 1,048.
56 13/169 429 39 DP8CMMLL5742 980. 1,054. 1,100. 1,135.
56 13/169 489 39 DP8CMMLL5748 1,052. 1,133. 1,181. 1,221.
56 13/169 609 39 DP8CMMLL5760 1,184. 1,277. 1,332. 1,377.
649 High, MonolithicOpen Base
64 1/169 189 39 DP8CMMLL6418 744. 801. 832. 864.
64 1/169 249 39 DP8CMMLL6424 801. 860. 892. 927.
64 1/169 309 39 DP8CMMLL6430 887. 953. 994. 1,030.
64 1/169 369 39 DP8CMMLL6436 963. 1,037. 1,080. 1,115.
64 1/169 429 39 DP8CMMLL6442 1,034. 1,110. 1,158. 1,199.
64 1/169 489 39 DP8CMMLL6448 1,107. 1,191. 1,244. 1,286.
64 1/169 609 39 DP8CMMLL6460 1,321. 1,426. 1,486. 1,536.
789 High, MonolithicOpen Base
78 9/169 189 39 DP8CMMLL7818 1,041. 1,118. 1,175. 1,206.
78 9/169 249 39 DP8CMMLL7824 1,141. 1,235. 1,286. 1,329.
78 9/169 309 39 DP8CMMLL7830 1,238. 1,329. 1,392. 1,436.
78 9/169 369 39 DP8CMMLL7836 1,345. 1,448. 1,516. 1,566.
78 9/169 429 39 DP8CMMLL7842 1,454. 1,574. 1,638. 1,695.
78 9/169 489 39 DP8CMMLL7848 1,550. 1,673. 1,747. 1,806.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Monolithic Panel with Open Base:
1. Pattern Number2. Top cap type3. Top cap finish4. Base finish5. Panel fabric
Order Code
Monolithic Panel with Open Base
Example: DP8CMMLL36184/117/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
LL Open Base
4 Radius Metal top cap
117 Soft Grey top cap finish
117 Soft Grey base racewayfinish
B191 Fairfield light fabric
Included with:
Monolithic Panel with Open Base:
• Panel frame• Acoustic panel inserts (2)• Open base• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Monolithic Panel with Open Base:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Dividends Horizon
12
Monolithic PanelsTile to Floor One SideWorksurface Height, 369 and 429 High
description h w d pattern no.grade
10 20 30 40
Worksurface Height,Monolithic Tile to Floor
28 1/29 159 39 DP8CMMFRWH15 $619. $664. $691. $708.
28 1/29 189 39 DP8CMMFRWH18 619. 664. 691. 708.
28 1/29 249 39 DP8CMMFRWH24 683. 732. 758. 782.
28 1/29 309 39 DP8CMMFRWH30 713. 764. 794. 817.
28 1/29 369 39 DP8CMMFRWH36 794. 852. 888. 916.
28 1/29 429 39 DP8CMMFRWH42 873. 939. 976. 1,009.
28 1/29 489 39 DP8CMMFRWH48 919. 984. 1,027. 1,064.
28 1/29 609 39 DP8CMMFRWH60 1,089. 1,166. 1,219. 1,260.
369 High, MonolithicTile to Floor
35 1/89 159 39 DP8CMMFR3615 619. 664. 691. 708.
35 1/89 189 39 DP8CMMFR3618 619. 664. 691. 708.
35 1/89 249 39 DP8CMMFR3624 683. 732. 758. 782.
35 1/89 309 39 DP8CMMFR3630 713. 764. 794. 817.
35 1/89 369 39 DP8CMMFR3636 794. 852. 888. 916.
35 1/89 429 39 DP8CMMFR3642 873. 939. 976. 1,009.
35 1/89 489 39 DP8CMMFR3648 919. 984. 1,027. 1,064.
35 1/89 609 39 DP8CMMFR3660 1,089. 1,166. 1,219. 1,260.
429 High, MonolithicTile to Floor
42 3/169 159 39 DP8CMMFR4215 642. 691. 717. 742.
42 3/169 189 39 DP8CMMFR4218 642. 691. 717. 742.
42 3/169 249 39 DP8CMMFR4224 691. 741. 769. 790.
42 3/169 309 39 DP8CMMFR4230 748. 803. 839. 863.
42 3/169 369 39 DP8CMMFR4236 811. 869. 910. 935.
42 3/169 429 39 DP8CMMFR4242 888. 952. 990. 1,025.
42 3/169 489 39 DP8CMMFR4248 937. 1,003. 1,046. 1,079.
42 3/169 609 39 DP8CMMFR4260 1,106. 1,188. 1,240. 1,279.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Monolithic Panel with Tileto Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Base raceway finish6. Panel fabric
Order Code
Monolithic Panel with Tile to Floor
Example: DP8CMMFR 36184/117/K/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
FR Tile to Floor
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts one side
117 Soft Grey base racewayfinish
B191 Fairfield light fabric
Included with:
Monolithic Panel with Tileto Floor:
• Panel frame• Acoustic panel inserts (2)• Top cap• Connection hardware• Base raceway on one side
Note: Preconfigured WorksurfaceHeight panels are not available withplastic top caps.
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers.
Options
Monolithic Panel with Tile toFloor:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Tile to Floor Side Option:Tile to Floor standard on side 2. Tospecify tile to floor on side 1,change ‘‘FR’’ in pattern number to‘‘RF’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
13
Pan
els,
Pre
-Con
figur
ed
Monolithic PanelsTile to Floor One Side509, 579 and 649 High
description h w d pattern no.grade
10 20 30 40
509 High, MonolithicTile to Floor
49 1/29 159 39 DP8CMMFR5015 $683. $732. $758. $782.
49 1/29 189 39 DP8CMMFR5018 683. 732. 758. 782.
49 1/29 249 39 DP8CMMFR5024 735. 783. 814. 841.
49 1/29 309 39 DP8CMMFR5030 802. 858. 896. 922.
49 1/29 369 39 DP8CMMFR5036 873. 939. 976. 1,009.
49 1/29 429 39 DP8CMMFR5042 955. 1,025. 1,070. 1,100.
49 1/29 489 39 DP8CMMFR5048 1,026. 1,099. 1,145. 1,180.
49 1/29 609 39 DP8CMMFR5060 1,212. 1,302. 1,356. 1,403.
579 High, MonolithicTile to Floor
56 13/169 159 39 DP8CMMFR5715 736. 783. 816. 842.
56 13/169 189 39 DP8CMMFR5718 736. 783. 816. 842.
56 13/169 249 39 DP8CMMFR5724 786. 842. 875. 905.
56 13/169 309 39 DP8CMMFR5730 864. 925. 966. 994.
56 13/169 369 39 DP8CMMFR5736 939. 1,005. 1,049. 1,083.
56 13/169 429 39 DP8CMMFR5742 1,015. 1,089. 1,135. 1,170.
56 13/169 489 39 DP8CMMFR5748 1,087. 1,168. 1,216. 1,256.
56 13/169 609 39 DP8CMMFR5760 1,219. 1,312. 1,367. 1,412.
649 High, MonolithicTile to Floor
64 1/169 159 39 DP8CMMFR6415 779. 836. 867. 899.
64 1/169 189 39 DP8CMMFR6418 779. 836. 867. 899.
64 1/169 249 39 DP8CMMFR6424 836. 895. 927. 962.
64 1/169 309 39 DP8CMMFR6430 922. 988. 1,029. 1,065.
64 1/169 369 39 DP8CMMFR6436 998. 1,072. 1,115. 1,150.
64 1/169 429 39 DP8CMMFR6442 1,069. 1,145. 1,193. 1,234.
64 1/169 489 39 DP8CMMFR6448 1,142. 1,226. 1,279. 1,321.
64 1/169 609 39 DP8CMMFR6460 1,356. 1,461. 1,521. 1,571.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Monolithic Panel with Tileto Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Base raceway finish6. Panel fabric
Order Code
Monolithic Panel with Tile to Floor
Example: DP8CMMFR 36184/117/K/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
FR Tile to Floor
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts one side
117 Soft Grey raceway finish
B191 Fairfield light fabric
Included with:
Monolithic Panel with Tile toFloor:
• Panel frame• Acoustic panel inserts (2)• Top cap• Connection hardware• Base raceway on one side
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Monolithic Panel with Tile toFloor:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Tile to Floor Side Option:Tile to Floor standard on side 2. Tospecify tile to floor on side 1,change ‘‘FR’’ in pattern number to‘‘RF’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
14
Monolithic PanelsTile to Floor One Side789 High
description h w d pattern no.grade
10 20 30 40
789 High, MonolithicTile to Floor
78 9/169 159 39 DP8CMMFR7815 $1,076. $1,153. $1,210. $1,241.
78 9/169 189 39 DP8CMMFR7818 1,076. 1,153. 1,210. 1,241.
78 9/169 249 39 DP8CMMFR7824 1,176. 1,270. 1,321. 1,364.
78 9/169 309 39 DP8CMMFR7830 1,273. 1,364. 1,427. 1,471.
78 9/169 369 39 DP8CMMFR7836 1,380. 1,483. 1,551. 1,601.
78 9/169 429 39 DP8CMMFR7842 1,489. 1,609. 1,673. 1,730.
78 9/169 489 39 DP8CMMFR7848 1,585. 1,708. 1,782. 1,841.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Monolithic Panel with Tileto Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Base raceway finish6. Panel fabric
Order Code
Monolithic Panel with Tile to Floor
Example: DP8CMMFR 36184/117/K/117/B191
DP8 Dividends HorizonPanel
C Topway frame
MM Monolithic both sides
FR Tile to Floor
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts one side
117 Soft Grey raceway finish
B191 Fairfield light fabric
Included with:
Monolithic Panel with Tile toFloor:
• Panel frame• Acoustic panel inserts (2)• Top cap• Connection hardware• Base raceway on one side
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Monolithic Panel with Tile toFloor:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Tile to Floor Side Option:Tile to Floor standard on side 2. Tospecify tile to floor on side 1,change ‘‘FR’’ in pattern number to‘‘RF’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
15
Pan
els,
Pre
-Con
figur
ed
Tiled PanelsBase Raceway369, 429 and 509 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic
One Side
369 High TiledStandard BaseRaceway
35 1/89 159 39 DP8CTTRR3615 $915. $988. $1,030. $1,063. $88.
35 1/89 189 39 DP8CTTRR3618 915. 988. 1,030. 1,063. 88.
35 1/89 249 39 DP8CTTRR3624 970. 1,046. 1,089. 1,130. 89.
35 1/89 309 39 DP8CTTRR3630 1,027. 1,101. 1,147. 1,190. 90.
35 1/89 369 39 DP8CTTRR3636 1,118. 1,200. 1,254. 1,299. 92.
35 1/89 429 39 DP8CTTRR3642 1,197. 1,286. 1,344. 1,392. 91.
35 1/89 489 39 DP8CTTRR3648 1,250. 1,346. 1,405. 1,453. 93.
35 1/89 609 39 DP8CTTRR3660 1,492. 1,605. 1,675. 1,733. 95.
429 High TiledStandard BaseRaceway
42 3/169 159 39 DP8CTTRR4215 937. 1,010. 1,055. 1,089. 88.
42 3/169 189 39 DP8CTTRR4218 937. 1,010. 1,055. 1,089. 88.
42 3/169 249 39 DP8CTTRR4224 994. 1,068. 1,114. 1,148. 89.
42 3/169 309 39 DP8CTTRR4230 1,063. 1,141. 1,191. 1,236. 90.
42 3/169 369 39 DP8CTTRR4236 1,134. 1,221. 1,273. 1,320. 92.
42 3/169 429 39 DP8CTTRR4242 1,209. 1,300. 1,355. 1,399. 91.
42 3/169 489 39 DP8CTTRR4248 1,269. 1,368. 1,430. 1,476. 93.
42 3/169 609 39 DP8CTTRR4260 1,517. 1,634. 1,706. 1,761. 95.
509 High TiledStandard BaseRaceway
49 1/29 159 39 DP8CTTRR5015 1,000. 1,076. 1,122. 1,164. 87.
49 1/29 189 39 DP8CTTRR5018 1,000. 1,076. 1,122. 1,164. 87.
49 1/29 249 39 DP8CTTRR5024 1,075. 1,162. 1,211. 1,247. 90.
49 1/29 309 39 DP8CTTRR5030 1,133. 1,220. 1,275. 1,317. 87.
49 1/29 369 39 DP8CTTRR5036 1,202. 1,288. 1,344. 1,393. 81.
49 1/29 429 39 DP8CTTRR5042 1,274. 1,372. 1,432. 1,478. 76.
49 1/29 489 39 DP8CTTRR5048 1,339. 1,439. 1,504. 1,559. 74.
49 1/29 609 39 DP8CTTRR5060 1,547. 1,664. 1,741. 1,799. 95.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with Standard BaseRaceway:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway finish6. Tile Support profile7. Panel fabric
Order Code
Tiled Panel with Standard BaseRaceway
Example: DP8CTTRR36184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
TT Tiled both sides
RR Base raceway
36 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Standard BaseRaceway:
• Panel frame• Acoustic panel inserts• Base raceway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with Standard BaseRaceway:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For one side tiled, one sidemonolithic, change ‘‘TT’’ in patternnumber to ‘‘MT’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
16
Tiled PanelsBase Raceway579, 649 and 789 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic
One Side
579 High TiledStandard BaseRaceway
56 13/169 159 39 DP8CTTRR5715 $1,206. $1,294. $1,351. $1,396. $109.
56 13/169 189 39 DP8CTTRR5718 1,206. 1,294. 1,351. 1,396. 109.
56 13/169 249 39 DP8CTTRR5724 1,288. 1,385. 1,444. 1,496. 113.
56 13/169 309 39 DP8CTTRR5730 1,360. 1,469. 1,532. 1,582. 116.
56 13/169 369 39 DP8CTTRR5736 1,439. 1,552. 1,624. 1,675. 118.
56 13/169 429 39 DP8CTTRR5742 1,526. 1,640. 1,713. 1,775. 121.
56 13/169 489 39 DP8CTTRR5748 1,608. 1,731. 1,806. 1,869. 123.
56 13/169 609 39 DP8CTTRR5760 1,859. 2,004. 2,093. 2,167. 125.
649 High TiledStandard BaseRaceway
64 1/169 159 39 DP8CTTRR6415 1,271. 1,367. 1,430. 1,476. 131.
64 1/169 189 39 DP8CTTRR6418 1,271. 1,367. 1,430. 1,476. 131.
64 1/169 249 39 DP8CTTRR6424 1,360. 1,469. 1,527. 1,581. 138.
64 1/169 309 39 DP8CTTRR6430 1,434. 1,546. 1,619. 1,670. 134.
64 1/169 369 39 DP8CTTRR6436 1,520. 1,638. 1,711. 1,771. 135.
64 1/169 429 39 DP8CTTRR6442 1,610. 1,735. 1,812. 1,872. 137.
64 1/169 489 39 DP8CTTRR6448 1,695. 1,821. 1,904. 1,968. 138.
64 1/169 609 39 DP8CTTRR6460 1,960. 2,115. 2,211. 2,284. 138.
789 High TiledStandard BaseRaceway
78 9/169 159 39 DP8CTTRR7815 1,906. 2,055. 2,145. 2,222. 235.
78 9/169 189 39 DP8CTTRR7818 1,906. 2,055. 2,145. 2,222. 235.
78 9/169 249 39 DP8CTTRR7824 2,048. 2,207. 2,307. 2,383. 243.
78 9/169 309 39 DP8CTTRR7830 2,167. 2,330. 2,440. 2,525. 237.
78 9/169 369 39 DP8CTTRR7836 2,312. 2,492. 2,604. 2,696. 258.
78 9/169 429 39 DP8CTTRR7842 2,445. 2,635. 2,760. 2,851. 263.
78 9/169 489 39 DP8CTTRR7848 2,588. 2,793. 2,919. 3,022. 315.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with Standard BaseRaceway:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway finish6. Tile support profile7. Tile support finish8. Panel fabric
Order Code
Tiled Panel with Standard BaseRaceway
Example: DP8CTTRR36184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
TT Tiled both sides
RR Base raceway
36 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Standard BaseRaceway:
• Panel frame• Acoustic panel inserts• Base raceway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Otpions
Tiled Panels with Standard BaseRaceway:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For one side tiled, one sidemonolithic, change ‘‘TT’’ in patternnumber to ‘‘MT’’ and deduct amountin far right column.
Top Cap Options:(3) = No Top Cap(4) = Radius Metal, add $40 P1,$42 P2, $44 P3 paint grades(5) = Flat Metal, add $40 P1, $42P2, $44 P3 paint grades
Raceway Knockout Options:(K) = Knockouts(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
17
Pan
els,
Pre
-Con
figur
ed
Tiled PanelsOpen Base369, 429 and 509 High
description h w d pattern no. 10 20 30 40
Deduct forMonolithic
One Side
369 High TiledOpen Base
35 1/89 189 39 DP8CTTLL3618 $915. $988. $1,030. $1,063. $88.
35 1/89 249 39 DP8CTTLL3624 970. 1,046. 1,089. 1,130. 89.
35 1/89 309 39 DP8CTTLL3630 1,027. 1,101. 1,147. 1,190. 90.
35 1/89 369 39 DP8CTTLL3636 1,118. 1,200. 1,254. 1,299. 92.
35 1/89 429 39 DP8CTTLL3642 1,197. 1,286. 1,344. 1,392. 91.
35 1/89 489 39 DP8CTTLL3648 1,250. 1,346. 1,405. 1,453. 93.
35 1/89 609 39 DP8CTTLL3660 1,492. 1,605. 1,675. 1,733. 95.
429 High TiledOpen Base
42 3/169 189 39 DP8CTTLL4218 937. 1,010. 1,055. 1,089. 88.
42 3/169 249 39 DP8CTTLL4224 994. 1,068. 1,114. 1,148. 89.
42 3/169 309 39 DP8CTTLL4230 1,063. 1,141. 1,191. 1,236. 90.
42 3/169 369 39 DP8CTTLL4236 1,134. 1,221. 1,273. 1,320. 92.
42 3/169 429 39 DP8CTTLL4242 1,209. 1,300. 1,355. 1,399. 91.
42 3/169 489 39 DP8CTTLL4248 1,269. 1,368. 1,430. 1,476. 93.
42 3/169 609 39 DP8CTTLL4260 1,517. 1,634. 1,706. 1,761. 95.
509 High TiledOpen Base
49 1/29 189 39 DP8CTTLL5018 970. 1,046. 1,089. 1,130. 87.
49 1/29 249 39 DP8CTTLL5024 1,045. 1,126. 1,177. 1,210. 90.
49 1/29 309 39 DP8CTTLL5030 1,100. 1,184. 1,239. 1,280. 87.
49 1/29 369 39 DP8CTTLL5036 1,167. 1,250. 1,305. 1,352. 81.
49 1/29 429 39 DP8CTTLL5042 1,238. 1,332. 1,392. 1,436. 76.
49 1/29 489 39 DP8CTTLL5048 1,300. 1,398. 1,461. 1,515. 74.
49 1/29 609 39 DP8CTTLL5060 1,547. 1,664. 1,741. 1,799. 95.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with Open Base:
1. Pattern Number2. Top cap type3. Top Cap finish4. Base finish5. Tile support profile6. Panel fabric
Order Code
Tiled Panel with Open Base
Example: DP8CTTLL36184/117/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
TT Tiled both sides
LL Open base
36 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
117 Soft Grey base finish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Open Base:
• Panel frame• Acoustic panel inserts• Open base• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panel with Open Base:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For one side tiled, one sidemonolithic, change ‘‘TT’’ in patternnumber to ‘‘MT’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
18
Tiled PanelsOpen Base579, 649 and 789 High
description h w d pattern no. 10 20 30 40
deduct forMonolithic
One Side
579 High TiledOpen Base
56 13/169 189 39 DP8CTTLL5718 $1,170. $1,256. $1,311. $1,355. $109.
56 13/169 249 39 DP8CTTLL5724 1,250. 1,345. 1,403. 1,453. 113.
56 13/169 309 39 DP8CTTLL5730 1,321. 1,426. 1,486. 1,536. 116.
56 13/169 369 39 DP8CTTLL5736 1,398. 1,506. 1,577. 1,628. 118.
56 13/169 429 39 DP8CTTLL5742 1,481. 1,592. 1,663. 1,724. 121.
56 13/169 489 39 DP8CTTLL5748 1,561. 1,681. 1,753. 1,814. 123.
56 13/169 609 39 DP8CTTLL5760 1,859. 2,004. 2,093. 2,167. 125.
649 High TiledOpen Base
64 1/169 189 39 DP8CTTLL6418 1,235. 1,327. 1,388. 1,433. 131.
64 1/169 249 39 DP8CTTLL6424 1,321. 1,426. 1,482. 1,535. 138.
64 1/169 309 39 DP8CTTLL6430 1,394. 1,500. 1,573. 1,621. 134.
64 1/169 369 39 DP8CTTLL6436 1,476. 1,590. 1,661. 1,718. 135.
64 1/169 429 39 DP8CTTLL6442 1,563. 1,684. 1,758. 1,817. 137.
64 1/169 489 39 DP8CTTLL6448 1,646. 1,768. 1,849. 1,912. 138.
64 1/169 609 39 DP8CTTLL6460 1,960. 2,115. 2,211. 2,284. 138.
789 High TiledOpen Base
78 9/169 189 39 DP8CTTLL7818 1,906. 2,055. 2,145. 2,222. 235.
78 9/169 249 39 DP8CTTLL7824 2,048. 2,207. 2,307. 2,383. 243.
78 9/169 309 39 DP8CTTLL7830 2,167. 2,330. 2,440. 2,525. 237.
78 9/169 369 39 DP8CTTLL7836 2,312. 2,492. 2,604. 2,696. 258.
78 9/169 429 39 DP8CTTLL7842 2,445. 2,635. 2,760. 2,851. 263.
78 9/169 489 39 DP8CTTLL7848 2,588. 2,793. 2,919. 3,022. 315.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with Open Base:
1. Pattern Number2. Top cap type3. Top Cap finish4. Base finish5. Tile support profile6. Panel fabric
Order Code
Tiled Panel with Open Base
Example: DP8CTTLL36184/117/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
TT Tiled both sides
LL Open base
36 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
117 Soft Grey base finish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Open Base:
• Panel frame• Acoustic panel inserts• Open base• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panel with Open Base:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For one side tiled, one sidemonolithic, change ‘‘TT’’ in patternnumber to ‘‘MT’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
19
Pan
els,
Pre
-Con
figur
ed
Tiled PanelsTile To Floor One Side369 and 429 High
description h w d pattern no. 10 20 30 40
Deduct forMonolithic
One Sideide 1
369 High Tiled PanelTile to FloorOne Side
35 1/89 159 39 DP8CTTFR3615 $950. $1,023. $1,065. $1,098. $88.
35 1/89 189 39 DP8CTTFR3618 950. 1,023. 1,065. 1,098. 88.
35 1/89 249 39 DP8CTTFR3624 1,005. 1,081. 1,124. 1,165. 89.
35 1/89 309 39 DP8CTTFR3630 1,062. 1,136. 1,182. 1,225. 90.
35 1/89 369 39 DP8CTTFR3636 1,153. 1,235. 1,289. 1,334. 92.
35 1/89 429 39 DP8CTTFR3642 1,232. 1,321. 1,379. 1,427. 91.
35 1/89 489 39 DP8CTTFR3648 1,285. 1,381. 1,440. 1,488. 93.
35 1/89 609 39 DP8CTTFR3660 1,527. 1,640. 1,710. 1,768. 95.
429 High Tiled PanelTile to FloorOne Side
42 3/169 159 39 DP8CTTFR4215 972. 1,045. 1,090. 1,124. 88.
42 3/169 189 39 DP8CTTFR4218 972. 1,045. 1,090. 1,124. 88.
42 3/169 249 39 DP8CTTFR4224 1,029. 1,103. 1,149. 1,183. 89.
42 3/169 309 39 DP8CTTFR4230 1,098. 1,176. 1,226. 1,271. 90.
42 3/169 369 39 DP8CTTFR4236 1,169. 1,256. 1,308. 1,355. 92.
42 3/169 429 39 DP8CTTFR4242 1,244. 1,335. 1,390. 1,434. 91.
42 3/169 489 39 DP8CTTFR4248 1,304. 1,403. 1,465. 1,511. 93.
42 3/169 609 39 DP8CTTFR4260 1,552. 1,669. 1,741. 1,796. 95.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with Tile to Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway finish5. Tile support profile6. Panel fabric
Order Code
Tiled Panel with Tile to Floor
Example: DP8CTTFR36184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
TT Tiled both sides
FR Tile to floor side one,raceway side two
36 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Knockouts for one-sidedbase raceway
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Tile to Floor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Base raceway with knockout one
side• Tile to the floor one side
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels With Tile To FloorOne Side:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For side 1 monolithic, side 2 tiled,change ‘‘TT’’ in pattern number to‘‘MT’’ and deduct amount in farright column.
Tile to Floor Side Option:Tile to floor standard on side 2. Tospecify tile to floor on side 1,change ‘‘RF’’ in pattern number to‘‘FR’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts on raceway side
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
20
Tiled PanelsTile To Floor One Side509 and 579 High
description h w d pattern no.grade
10 20 30 40
deduct forMonolithic
One Side
509 High Tiled PanelTile to FloorOne Side
49 1/29 159 39 DP8CTTFR5015 $1,035. $1,111. $1,157. $1,199. $87.
49 1/29 189 39 DP8CTTFR5018 1,035. 1,111. 1,157. 1,199. 87.
49 1/29 249 39 DP8CTTFR5024 1,110. 1,197. 1,246. 1,282. 90.
49 1/29 309 39 DP8CTTFR5030 1,168. 1,255. 1,310. 1,352. 87.
49 1/29 369 39 DP8CTTFR5036 1,237. 1,323. 1,379. 1,428. 81.
49 1/29 429 39 DP8CTTFR5042 1,309. 1,407. 1,467. 1,513. 76.
49 1/29 489 39 DP8CTTFR5048 1,374. 1,474. 1,539. 1,594. 74.
49 1/29 609 39 DP8CTTFR5060 1,582. 1,699. 1,776. 1,834. 95.
579 High Tiled PanelTile to FloorOne Side
56 13/169 159 39 DP8CTTFR5715 1,241. 1,329. 1,386. 1,431. 109.
56 13/169 189 39 DP8CTTFR5718 1,241. 1,329. 1,386. 1,431. 109.
56 13/169 249 39 DP8CTTFR5724 1,323. 1,420. 1,479. 1,531. 113.
56 13/169 309 39 DP8CTTFR5730 1,395. 1,504. 1,567. 1,617. 116.
56 13/169 369 39 DP8CTTFR5736 1,474. 1,587. 1,659. 1,710. 118.
56 13/169 429 39 DP8CTTFR5742 1,561. 1,675. 1,748. 1,810. 121.
56 13/169 489 39 DP8CTTFR5748 1,643. 1,766. 1,841. 1,904. 123.
56 13/169 609 39 DP8CTTFR5760 1,894. 2,039. 2,128. 2,202. 125.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with Tile to Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway finish5. Tile support profile6. Panel fabric
Order Code
Tiled Panel with Tile to Floor
Example: DP8CTTFR50184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
TT Tiled both sides
FR Tile to floor side one,raceway side two
50 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Knockouts for one-sidedbase raceway
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Tile to Floor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Base raceway with knockout one
side• Tile to the floor one side
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels With Tile To FloorOne Side:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Options:For side 1 monolithic, side 2 tiled,change ‘‘TT’’ in pattern number to‘‘MT’’ and deduct amount in farright column.
Tile to Floor Side Option:Tile to floor standard on side 1. Tospecify tile to floor on side 2,change ‘‘RF’’ in pattern number to‘‘FR’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts on raceway side
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
21
Pan
els,
Pre
-Con
figur
ed
Tiled PanelsTile To Floor One Side649 and 789 High
description h w d pattern no.grade
10 20 30 40
deduct forMonolithic
One Side
649 High Tiled PanelTile to FloorOne Side
64 1/169 159 39 DP8CTTFR6415 $1,306. $1,402. $1,465. $1,511. $131.
64 1/169 189 39 DP8CTTFR6418 1,306. 1,402. 1,465. 1,511. 131.
64 1/169 249 39 DP8CTTFR6424 1,395. 1,504. 1,562. 1,616. 138.
64 1/169 309 39 DP8CTTFR6430 1,469. 1,581. 1,654. 1,705. 134.
64 1/169 369 39 DP8CTTFR6436 1,555. 1,673. 1,746. 1,806. 135.
64 1/169 429 39 DP8CTTFR6442 1,645. 1,770. 1,847. 1,907. 137.
64 1/169 489 39 DP8CTTFR6448 1,730. 1,856. 1,939. 2,003. 138.
64 1/169 609 39 DP8CTTFR6460 1,995. 2,150. 2,246. 2,319. 138.
789 High Tiled PanelTile to FloorOne Side
78 9/169 159 39 DP8CTTFR7815 1,941. 2,090. 2,180. 2,257. 235.
78 9/169 189 39 DP8CTTFR7818 1,941. 2,090. 2,180. 2,257. 235.
78 9/169 249 39 DP8CTTFR7824 2,083. 2,242. 2,342. 2,418. 243.
78 9/169 309 39 DP8CTTFR7830 2,202. 2,365. 2,475. 2,560. 237.
78 9/169 369 39 DP8CTTFR7836 2,347. 2,527. 2,639. 2,731. 258.
78 9/169 429 39 DP8CTTFR7842 2,480. 2,670. 2,795. 2,886. 263.
78 9/169 489 39 DP8CTTFR7848 2,623. 2,828. 2,954. 3,057. 315.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with Tile to Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway finish5. Tile support profile6. Panel fabric
Order Code
Tiled Panel with Tile to Floor
Example: DP8CTTFR64184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
TT Tiled both sides
FR Tile to floor side one,raceway side two
64 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Knockouts for one-sidedbase raceway
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Tile to Floor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Base raceway with knockout one
side• Tile to the floor one side
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels With Tile To FloorOne Side:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Options:For side 1 monolithic, side 2 tiled,change ‘‘TT’’ in pattern number to‘‘MT’’ and deduct amount in farright column.
Tile to Floor Side Option:Tile to floor standard on side 1. Tospecify tile to floor on side 2,change ‘‘RF’’ in pattern number to‘‘FR’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts on raceway side
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
22
Tiled Panels289 Lower Tile and Base Raceway429 and 509 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic
One Side
429 High Tiled Panelwith 289 Lower Tileand Base Raceway
42 3/169 159 39 DP8CPPRR4215 $854. $923. $967. $1,004. $59.
42 3/169 189 39 DP8CPPRR4218 854. 923. 967. 1,004. 59.
42 3/169 249 39 DP8CPPRR4224 909. 985. 1,027. 1,065. 59.
42 3/169 309 39 DP8CPPRR4230 977. 1,057. 1,103. 1,143. 60.
42 3/169 369 39 DP8CPPRR4236 1,048. 1,134. 1,188. 1,235. 62.
42 3/169 429 39 DP8CPPRR4242 1,121. 1,211. 1,268. 1,315. 62.
42 3/169 489 39 DP8CPPRR4248 1,184. 1,283. 1,344. 1,393. 63.
42 3/169 609 39 DP8CPPRR4260 1,430. 1,546. 1,618. 1,680. 64.
509 High Tiled Panelwith 289 Lower Tileand Base Raceway
49 1/29 159 39 DP8CPPRR5015 884. 955. 1,004. 1,043. 58.
49 1/29 189 39 DP8CPPRR5018 884. 955. 1,004. 1,043. 58.
49 1/29 249 39 DP8CPPRR5024 954. 1,040. 1,086. 1,126. 60.
49 1/29 309 39 DP8CPPRR5030 1,012. 1,098. 1,147. 1,194. 58.
49 1/29 369 39 DP8CPPRR5036 1,077. 1,167. 1,218. 1,264. 54.
49 1/29 429 39 DP8CPPRR5042 1,144. 1,244. 1,302. 1,350. 50.
49 1/29 489 39 DP8CPPRR5048 1,211. 1,313. 1,378. 1,428. 49.
49 1/29 609 39 DP8CPPRR5060 1,459. 1,581. 1,653. 1,715. 64.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with 28( Lower Tileand Base Raceway:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway trim finish6. Tile support profile7. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Base Raceway
Example: DP8CPPRR42184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
PP Tiled both sides, 289
Lower Tile
RR Raceway both sides
42 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panel with Standard BaseRaceway and 28( Base Tile:
• Panel frame• Acoustic panel inserts• Base raceway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panel with 28( Lower Tileand Base Raceway:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For side 1 monolithic, side 2 tiled,change ‘‘PP’’ in pattern number to‘‘MP’’ and deduct amount in farright column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
23
Pan
els,
Pre
-Con
figur
ed
Tiled Panels289 Lower Tile and Base Raceway579 and 649 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic
One Side
579 High Tiled Panelwith 289 Lower Tileand Base Raceway
56 13/169 159 39 DP8CPPRR5715 $1,079. $1,173. $1,225. $1,268. $73.
56 13/169 189 39 DP8CPPRR5718 1,079. 1,173. 1,225. 1,268. 73.
56 13/169 249 39 DP8CPPRR5724 1,167. 1,257. 1,320. 1,366. 76.
56 13/169 309 39 DP8CPPRR5730 1,236. 1,337. 1,396. 1,448. 78.
56 13/169 369 39 DP8CPPRR5736 1,313. 1,420. 1,492. 1,539. 79.
56 13/169 429 39 DP8CPPRR5742 1,394. 1,506. 1,580. 1,637. 81.
56 13/169 489 39 DP8CPPRR5748 1,470. 1,591. 1,664. 1,727. 82.
56 13/169 609 39 DP8CPPRR5760 1,774. 1,913. 2,008. 2,080. 85.
649 High Tiled Panelwith 289 Lower Tileand Base Raceway
64 1/169 159 39 DP8CPPRR6415 1,142. 1,241. 1,300. 1,346. 89.
64 1/169 189 39 DP8CPPRR6418 1,142. 1,241. 1,300. 1,346. 89.
64 1/169 249 39 DP8CPPRR6424 1,236. 1,337. 1,395. 1,447. 93.
64 1/169 309 39 DP8CPPRR6430 1,306. 1,409. 1,486. 1,536. 90.
64 1/169 369 39 DP8CPPRR6436 1,393. 1,504. 1,577. 1,634. 91.
64 1/169 429 39 DP8CPPRR6442 1,473. 1,597. 1,674. 1,729. 92.
64 1/169 489 39 DP8CPPRR6448 1,561. 1,684. 1,760. 1,830. 93.
64 1/169 609 39 DP8CPPRR6460 1,878. 2,027. 2,123. 2,198. 93.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with 28( Lower Tileand Base Raceway:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway trim finish6. Tile support style7. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Base Raceway
Example: DP8CPPRR57184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
PP Tiled both sides, 289
Lower Tile
RR Raceway both sides
57 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
2 D2 style tile support
B191 Fairfield light fabric
Included with:
Tiled Panel with Standard BaseRaceway and 28( Base Tile:
• Panel frame• Acoustic panel inserts• Base raceway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Base Raceway:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For side 1 monolithic, side 2 tiled,change ‘‘PP’’ in pattern number to‘‘MP’’ and deduct amount in farright column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
24
Tiled Panels289 Lower Tile and Base Raceway789 High
description h w d pattern no.grade
10 20 30 40
deduct forMonolithic
One Side
789 High Tiled Panelwith 289 Lower Tileand Base Raceway
78 9/169 159 39 DP8CPPRR7815 $1,826. $1,967. $2,058. $2,134. $158.
78 9/169 189 39 DP8CPPRR7818 1,826. 1,967. 2,058. 2,134. 158.
78 9/169 249 39 DP8CPPRR7824 1,959. 2,120. 2,222. 2,297. 163.
78 9/169 309 39 DP8CPPRR7830 2,080. 2,243. 2,349. 2,439. 160.
78 9/169 369 39 DP8CPPRR7836 2,228. 2,402. 2,519. 2,605. 173.
78 9/169 429 39 DP8CPPRR7842 2,360. 2,548. 2,668. 2,768. 176.
78 9/169 489 39 DP8CPPRR7848 2,504. 2,708. 2,835. 2,935. 211.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panel with 28( Lower Tileand Base Raceway:
1. Pattern Number2. Top cap type3. Top cap finish4. Raceway knockout option5. Raceway trim finish6. Tile support style7. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Base Raceway
Example: DP8CPPRR78184/117/K/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
PP Tiled both sides, 289
Lower Tile
RR Raceway both sides
78 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
2 D2 style tile support
B191 Fairfield light fabric
Included with:
Tiled Panel with Standard BaseRaceway and 28( Base Tile:
• Panel frame• Acoustic panel inserts• Base raceway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Base Raceway:
Full View Frame Option:To specify full view frame forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For side 1 monolithic, side 2 tiled,change ‘‘PP’’ in pattern number to‘‘MP’’ and deduct amount in farright column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
25
Pan
els,
Pre
-Con
figur
ed
Tiled Panels289 Lower Tile and Open Base429 and 509 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic
One Side
429 High Tiled Panelwith 289 Lower Tileand Open Base
42 3/169 189 39 DP8CPPLL4218 $854. $923. $967. $1,004. $59.
42 3/169 249 39 DP8CPPLL4224 909. 985. 1,027. 1,065. 59.
42 3/169 309 39 DP8CPPLL4230 977. 1,057. 1,103. 1,143. 60.
42 3/169 369 39 DP8CPPLL4236 1,048. 1,134. 1,188. 1,235. 62.
42 3/169 429 39 DP8CPPLL4242 1,121. 1,211. 1,268. 1,315. 62.
42 3/169 489 39 DP8CPPLL4248 1,184. 1,283. 1,344. 1,393. 63.
42 3/169 609 39 DP8CPPLL4260 1,430. 1,546. 1,618. 1,680. 64.
509 High Tiled Panelwith 289 Lower Tileand Open Base
49 1/29 189 39 DP8CPPLL5018 884. 955. 1,004. 1,043. 58.
49 1/29 249 39 DP8CPPLL5024 954. 1,040. 1,086. 1,126. 60.
49 1/29 309 39 DP8CPPLL5030 1,012. 1,098. 1,147. 1,194. 58.
49 1/29 369 39 DP8CPPLL5036 1,077. 1,167. 1,218. 1,264. 54.
49 1/29 429 39 DP8CPPLL5042 1,144. 1,244. 1,302. 1,350. 50.
49 1/29 489 39 DP8CPPLL5048 1,211. 1,313. 1,378. 1,428. 49.
49 1/29 609 39 DP8CPPLL5060 1,459. 1,581. 1,653. 1,715. 64.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panels with 28( Lower Tileand Open Base:
1. Pattern Number2. Top cap type3. Top cap trim finish4. Base support trim finish5. Tile support style6. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Open Base
Example: DP8CPPLL42184/117/KK/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
PP Tiled both sides, 289
Lower Tile
LL Open Base
42 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
117 Soft Grey base supportfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panels with 28( Lower Tileand Open Base:
• Panel frame• Acoustic panel inserts• Open base• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Open Base:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘PP’’ in patternnumber to ‘‘MP’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Base Raceway Knockout Options:
(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
26
Tiled Panels289 Lower Tile and Open Base579 and 649 High
description h w d pattern no.grade
10 20 30 40
deduct forMonolithic
One Side
579 High Tiled Panelwith 289 Lower Tileand Open Base
56 13/169 189 39 DP8CPPLL5718 $1,079. $1,173. $1,225. $1,268. $73.
56 13/169 249 39 DP8CPPLL5724 1,167. 1,257. 1,320. 1,366. 76.
56 13/169 309 39 DP8CPPLL5730 1,236. 1,337. 1,396. 1,448. 78.
56 13/169 369 39 DP8CPPLL5736 1,313. 1,420. 1,492. 1,539. 79.
56 13/169 429 39 DP8CPPLL5742 1,394. 1,506. 1,580. 1,637. 81.
56 13/169 489 39 DP8CPPLL5748 1,470. 1,591. 1,664. 1,727. 82.
56 13/169 609 39 DP8CPPLL5760 1,774. 1,913. 2,008. 2,080. 85.
649 High Tiled Panelwith 289 Lower Tileand Open Base
64 1/169 189 39 DP8CPPLL6418 1,142. 1,241. 1,300. 1,346. 89.
64 1/169 249 39 DP8CPPLL6424 1,236. 1,337. 1,395. 1,447. 93.
64 1/169 309 39 DP8CPPLL6430 1,306. 1,409. 1,486. 1,536. 90.
64 1/169 369 39 DP8CPPLL6436 1,393. 1,504. 1,577. 1,634. 91.
64 1/169 429 39 DP8CPPLL6442 1,473. 1,597. 1,674. 1,729. 92.
64 1/169 489 39 DP8CPPLL6448 1,561. 1,684. 1,760. 1,830. 93.
64 1/169 609 39 DP8CPPLL6460 1,878. 2,027. 2,123. 2,198. 93.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panels with 28( Lower Tileand Open Base:
1. Pattern Number2. Top cap type3. Top cap trim finish4. Base support trim finish5. Tile support style6. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Open Base
Example: DP8CPPLL57184/117/KK/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
PP Tiled both sides, 289
Lower Tile
LL Open Base
57 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
117 Soft Grey base supportfinish
2 D2 style tile support
B191 Fairfield light fabric
Included with:
Tiled Panels with 28( Lower Tileand Open Base:
• Panel frame• Acoustic panel inserts• Open base• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Open Base:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘PP’’ in patternnumber to ‘‘MP’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Base Raceway Knockout Options:
(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
27
Pan
els,
Pre
-Con
figur
ed
Tiled Panels289 Lower Tile and Open Base789 High
description h w d pattern no.grade
10 20 30 40
deduct forMonolithic
One Side
789 High Tiled Panelwith 289 Lower Tileand Open Base
78 9/169 189 39 DP8CPPLL7818 $1,826. $1,967. $2,058. $2,134. $158.
78 9/169 249 39 DP8CPPLL7824 1,959. 2,120. 2,222. 2,297. 163.
78 9/169 309 39 DP8CPPLL7830 2,080. 2,243. 2,349. 2,439. 160.
78 9/169 369 39 DP8CPPLL7836 2,228. 2,402. 2,519. 2,605. 173.
78 9/169 429 39 DP8CPPLL7842 2,360. 2,548. 2,668. 2,768. 176.
78 9/169 489 39 DP8CPPLL7848 2,504. 2,708. 2,835. 2,935. 211.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panels with 28( Lower Tileand Open Base:
1. Pattern Number2. Top cap type3. Top cap trim finish4. Base support trim finish5. Tile support style6. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Open Base
Example: DP8CPPLL78184/117/KK/117/2/B191
DP8 Dividends HorizonPanel
C Topway frame
PP Tiled both sides, 289
Lower Tile
LL Open Base
78 Height
18 Width
4 Radius Metal top cap
117 Soft Grey top cap finish
117 Soft Grey base supportfinish
2 D2 style tile support
B191 Fairfield light fabric
Included with:
Tiled Panels with 28( Lower Tileand Open Base:
• Panel frame• Acoustic panel inserts• Open base• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Open Base:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘PP’’ in patternnumber to ‘‘MP’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Base Raceway Knockout Options:
(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
28
Tiled Panels289 Lower Tile and Tile To Floor429 and 509 High
description h w d pattern no.grade
10 20 30 40
Deduct for1 side
Monolithic
429 High Tiled Panelwith 289 Lower Tileand Tile to Floor
42 3/169 159 39 DP8CPPFR4215 $889. $958. $1,002. $1,039. $59.
42 3/169 189 39 DP8CPPFR4218 889. 958. 1,002. 1,039. 59.
42 3/169 249 39 DP8CPPFR4224 944. 1,020. 1,062. 1,100. 59.
42 3/169 309 39 DP8CPPFR4230 1,012. 1,092. 1,138. 1,178. 60.
42 3/169 369 39 DP8CPPFR4236 1,083. 1,169. 1,223. 1,270. 62.
42 3/169 429 39 DP8CPPFR4242 1,156. 1,246. 1,303. 1,350. 62.
42 3/169 489 39 DP8CPPFR4248 1,219. 1,318. 1,379. 1,428. 63.
42 3/169 609 39 DP8CPPFR4260 1,465. 1,581. 1,653. 1,715. 64.
509 High Tiled Panelwith 289 Lower Tileand Tile to Floor
49 1/29 159 39 DP8CPPFR5015 919. 990. 1,039. 1,078. 58.
49 1/29 189 39 DP8CPPFR5018 919. 990. 1,039. 1,078. 58.
49 1/29 249 39 DP8CPPFR5024 989. 1,075. 1,121. 1,161. 60.
49 1/29 309 39 DP8CPPFR5030 1,047. 1,133. 1,182. 1,229. 58.
49 1/29 369 39 DP8CPPFR5036 1,112. 1,202. 1,253. 1,299. 54.
49 1/29 429 39 DP8CPPFR5042 1,179. 1,279. 1,337. 1,385. 50.
49 1/29 489 39 DP8CPPFR5048 1,246. 1,348. 1,413. 1,463. 49.
49 1/29 609 39 DP8CPPFR5060 1,494. 1,616. 1,688. 1,750. 64.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panels with 28( Lower Tileand Tile To Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Knockout option5. Base raceway finish6. Tile support style7. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Tile To Floor:
Example: DP8CPPFF42184/117/K/117/2B191
DP8CPPFF4218
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts
117 Soft grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panels with 28( Lower Tileand Tile To Floor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Tile to floor side 1• Base raceway with knockout
when required side 2
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Tile To Floor:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Tile to Floor Side Option:Tile to Floor standard on side 1. Tospecify tile to floor on side 2,change ‘‘FR’’ in pattern number to‘‘RF’’.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘PP’’ in patternnumber to ‘‘MP’’ and deduct amountin far right column. Top CapOptions:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
29
Pan
els,
Pre
-Con
figur
ed
Tiled Panels289 Lower Tile and Tile To Floor579 and 649 High
description h w d pattern no.grade
10 20 30 40
deduct for1 side
Monolithic
579 High Tiled Panelwith 289 Lower Tileand Tile to Floor
56 13/169 159 39 DP8CPPFR5715 $1,114. $1,208. $1,260. $1,303. $73.
56 13/169 189 39 DP8CPPFR5718 1,114. 1,208. 1,260. 1,303. 73.
56 13/169 249 39 DP8CPPFR5724 1,202. 1,292. 1,355. 1,401. 76.
56 13/169 309 39 DP8CPPFR5730 1,271. 1,372. 1,431. 1,483. 78.
56 13/169 369 39 DP8CPPFR5736 1,348. 1,455. 1,527. 1,574. 79.
56 13/169 429 39 DP8CPPFR5742 1,429. 1,541. 1,615. 1,672. 81.
56 13/169 489 39 DP8CPPFR5748 1,505. 1,626. 1,699. 1,762. 82.
56 13/169 609 39 DP8CPPFR5760 1,809. 1,948. 2,043. 2,115. 85.
649 High Tiled Panelwith 289 Lower Tileand Tile to Floor
64 1/169 159 39 DP8CPPFR6415 1,177. 1,276. 1,335. 1,381. 89.
64 1/169 189 39 DP8CPPFR6418 1,177. 1,276. 1,335. 1,381. 89.
64 1/169 249 39 DP8CPPFR6424 1,271. 1,372. 1,430. 1,482. 93.
64 1/169 309 39 DP8CPPFR6430 1,341. 1,444. 1,521. 1,571. 90.
64 1/169 369 39 DP8CPPFR6436 1,428. 1,539. 1,612. 1,669. 91.
64 1/169 429 39 DP8CPPFR6442 1,508. 1,632. 1,709. 1,764. 92.
64 1/169 489 39 DP8CPPFR6448 1,596. 1,719. 1,795. 1,865. 93.
64 1/169 609 39 DP8CPPFR6460 1,913. 2,062. 2,158. 2,233. 93.
Dimensions listed under h w d are actual to the nearest 1/89
Ordering Information
Tiled Panels with 28( Lower Tileand Tile To Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Knockout option5. Base raceway finish6. Tile support style7. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Tile To Floor:
Example: DP8CPPFF42184/117/K/117/2/B191
DP8CPPFF4218
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panels with 28( Lower Tileand Tile To Floor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Tile to floor side 1• Base raceway with knockout
when required side 2
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Tile To Floor:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Tile to Floor Side Option:Tile to Floor standard on side 1. Tospecify tile to floor on side 2,change ‘‘FR’’ in pattern number to‘‘RF’’.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘PP’’ in patternnumber to ‘‘MP’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
30
Tiled Panels289 Lower Tile and Tile To Floor789 High
description h w d pattern no.grade
10 20 30 40
deduct for1 side
Monolithic
789 High Tiled Panelwith 289 Lower Tileand Tile to Floor
78 9/169 159 39 DP8CPPFR7815 $1,861. $2,002. $2,093. $2,169. $158.
78 9/169 189 39 DP8CPPFR7818 1,861. 2,002. 2,093. 2,169. 158.
78 9/169 249 39 DP8CPPFR7824 1,994. 2,155. 2,257. 2,332. 163.
78 9/169 309 39 DP8CPPFR7830 2,115. 2,278. 2,384. 2,474. 160.
78 9/169 369 39 DP8CPPFR7836 2,263. 2,437. 2,554. 2,640. 173.
78 9/169 429 39 DP8CPPFR7842 2,395. 2,583. 2,703. 2,803. 176.
78 9/169 489 39 DP8CPPFR7848 2,539. 2,743. 2,870. 2,970. 211.
Ordering Information
Tiled Panels with 28( Lower Tileand Tile To Floor:
1. Pattern Number2. Top cap type3. Top cap finish4. Knockout option5. Base raceway finish6. Tile support style7. Panel fabric
Order Code
Tiled Panels with 28( Lower Tileand Tile To Floor:
Example: DP8CPPFF42184/117/K/117/2/B191
DP8CPPFF4218
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts
117 Soft Grey base racewayfinish
2 D2 style tile supports
B191 Fairfield light fabric
Included with:
Tiled Panels with 28( Lower Tileand Tile To Floor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Base raceway with knockout
when required
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Tiled Panels with 28( Lower Tileand Tile To Floor:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Tile to Floor Side Option:Tile to Floor standard on side 1. Tospecify tile to floor on side 2,change ‘‘FR’’ in pattern number to‘‘RF’’.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘PP’’ in patternnumber to ‘‘MP’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No knockouts
Tile Support Options:(1) = D1 External Reveal(2) = D2 Recessed Reveal
Dividends Horizon
31
Pan
els,
Pre
-Con
figur
ed
Beltway PanelsStandard Base Raceway429 and 509 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic on
side 2
429 Beltway Panels withStandard Base Raceway
42 3/169 189 39 DP8CBBRR4218 $898. $967. $1,008. $1,040. $92.
42 3/169 249 39 DP8CBBRR4224 1,012. 1,084. 1,134. 1,174. 114.
42 3/169 309 39 DP8CBBRR4230 1,106. 1,190. 1,243. 1,280. 123.
42 3/169 369 39 DP8CBBRR4236 1,208. 1,300. 1,356. 1,403. 136.
42 3/169 429 39 DP8CBBRR4242 1,304. 1,406. 1,470. 1,516. 142.
42 3/169 489 39 DP8CBBRR4248 1,389. 1,497. 1,559. 1,613. 153.
42 3/169 609 39 DP8CBBRR4260 1,569. 1,691. 1,764. 1,826. 153.
509 Beltway Panels withStandard Base Raceway
49 1/29 189 39 DP8CBBRR5018 930. 1,001. 1,043. 1,077. 91.
49 1/29 249 39 DP8CBBRR5024 1,058. 1,135. 1,188. 1,227. 115.
49 1/29 309 39 DP8CBBRR5030 1,146. 1,229. 1,280. 1,327. 119.
49 1/29 369 39 DP8CBBRR5036 1,235. 1,328. 1,389. 1,432. 125.
49 1/29 429 39 DP8CBBRR5042 1,329. 1,432. 1,500. 1,550. 131.
49 1/29 489 39 DP8CBBRR5048 1,416. 1,528. 1,595. 1,653. 136.
49 1/29 609 39 DP8CBBRR5060 1,602. 1,725. 1,806. 1,865. 136.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Beltway Panel with Standard BaseRaceway:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway knockout option5. Base raceway finish6. Beltway finish7. Panel fabric
Order Code
Beltway Panel with Standard BaseRaceway
Example: DP8CBBRR42184/117/K/117/117/B191
DP8CBBRR4218
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base Raceway withknockouts both sides
117 Soft Grey base racewayfinish
117 Beltway finish
B191 Fairfield light fabric
Included with:
Beltway Panel with Standard BaseRaceway:
• Panel frame• Acoustic panel inserts• Base raceway covers• Beltway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Beltway Panel with StandardRaceway Options:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘BB’’ in patternnumber to ‘‘MB’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
32
Beltway PanelsStandard Base Raceway579, 649 and 789 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic on
side 2
579 Beltway Panels withStandard Base Raceway
56 13/169 189 39 DP8CBBRR5718 $990. $1,065. $1,111. $1,152. $91.
56 13/169 249 39 DP8CBBRR5724 1,114. 1,203. 1,256. 1,299. 115.
56 13/169 309 39 DP8CBBRR5730 1,203. 1,295. 1,354. 1,399. 119.
56 13/169 369 39 DP8CBBRR5736 1,318. 1,418. 1,482. 1,532. 125.
56 13/169 429 39 DP8CBBRR5742 1,409. 1,519. 1,587. 1,643. 131.
56 13/169 489 39 DP8CBBRR5748 1,507. 1,623. 1,697. 1,755. 136.
56 13/169 609 39 DP8CBBRR5760 1,692. 1,823. 1,905. 1,970. 136.
649 Beltway Panels withStandard Base Raceway
64 1/169 189 39 DP8CBBRR6418 1,048. 1,128. 1,176. 1,219. 98.
64 1/169 249 39 DP8CBBRR6424 1,175. 1,264. 1,321. 1,365. 121.
64 1/169 309 39 DP8CBBRR6430 1,260. 1,356. 1,415. 1,467. 121.
64 1/169 369 39 DP8CBBRR6436 1,399. 1,504. 1,569. 1,621. 138.
64 1/169 429 39 DP8CBBRR6442 1,494. 1,603. 1,674. 1,729. 146.
64 1/169 489 39 DP8CBBRR6448 1,598. 1,723. 1,801. 1,859. 159.
64 1/169 609 39 DP8CBBRR6460 1,799. 1,938. 2,024. 2,093. 159.
789 Beltway Panels withStandard Base Raceway
78 9/169 189 39 DP8CBBRR7818 1,304. 1,406. 1,470. 1,516. 89.
78 9/169 249 39 DP8CBBRR7824 1,459. 1,566. 1,632. 1,693. 102.
78 9/169 309 39 DP8CBBRR7830 1,558. 1,681. 1,755. 1,814. 105.
78 9/169 369 39 DP8CBBRR7836 1,720. 1,852. 1,938. 2,005. 123.
78 9/169 429 39 DP8CBBRR7842 1,845. 1,983. 2,080. 2,149. 126.
78 9/169 489 39 DP8CBBRR7848 2,024. 2,185. 2,281. 2,363. 156.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Beltway Panel with Standard BaseRaceway:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway knockout option5. Base raceway finish6. Beltway finish7. Panel fabric
Order Code
Beltway Panel with Standard BaseRaceway
Example: DP8CBBRR42184/117/K/117/117/B191
DP8CBBRR4218
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base Raceway withknockouts both sides
117 Soft Grey base racewayfinish
117 Beltway finish
B191 Fairfield light fabric
Included with:
Beltway Panel with Standard BaseRaceway:
• Panel frame• Acoustic panel inserts• Base raceway covers• Beltway covers• Top cap• Connection hardware
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Beltway Panel with StandardRaceway Options:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:To specify monolithic on side one ofpanel, change ‘‘BB’’ in patternnumber to ‘‘MB’’ and deduct amountin far right column.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
33
Pan
els,
Pre
-Con
figur
ed
Beltway PanelsTile to the Floor429 and 509 High
description h w d pattern no.grade
10 20 30 40
Deduct forMonolithic
side 1
429 Beltway Panelswith Tile to the Floor
42 3/169 189 39 DP8CBBFR4218 $933. $1,002. $1,043. $1,075. $92.
42 3/169 249 39 DP8CBBFR4224 1,047. 1,119. 1,169. 1,209. 114.
42 3/169 309 39 DP8CBBFR4230 1,141. 1,225. 1,278. 1,315. 123.
42 3/169 369 39 DP8CBBFR4236 1,243. 1,335. 1,391. 1,438. 136.
42 3/169 429 39 DP8CBBFR4242 1,339. 1,441. 1,505. 1,551. 142.
42 3/169 489 39 DP8CBBFR4248 1,424. 1,532. 1,594. 1,648. 153.
42 3/169 609 39 DP8CBBFR4260 1,604. 1,726. 1,799. 1,861. 153.
509 Beltway Panelswith Tile to the Floor
49 1/29 189 39 DP8CBBFR5018 965. 1,036. 1,078. 1,112. 91.
49 1/29 249 39 DP8CBBFR5024 1,093. 1,170. 1,223. 1,262. 115.
49 1/29 309 39 DP8CBBFR5030 1,181. 1,264. 1,315. 1,362. 119.
49 1/29 369 39 DP8CBBFR5036 1,270. 1,363. 1,424. 1,467. 125.
49 1/29 429 39 DP8CBBFR5042 1,364. 1,467. 1,535. 1,585. 131.
49 1/29 489 39 DP8CBBFR5048 1,451. 1,563. 1,630. 1,688. 136.
49 1/29 609 39 DP8CBBFR5060 1,637. 1,760. 1,841. 1,900. 136.
Dimensions listed under h w c are actual to the nearest 1/169
Ordering Information
Beltway Panel with Tile to theFloor:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway knockout option5. Base raceway finish6. Beltway finish7. Panel fabric
Order Code
Beltway Panel with Tile to theFloor:
Example: DP8CBBFR42184/117/K/117/117/B191
DP8CBBFR4218
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
117 Soft Grey beltway coverfinish
B191 Fairfield light fabric
Included with:
Beltway Panel with Tile to theFloor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Base raceway side 2• Beltway with covers• Tile to the floor side 1
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Beltway Panel with Tile to theFloor:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For side 1 monolithic, side 2beltway, change ‘‘BB’’ in patternnumber to ‘‘MB’’ and deduct amountin far right column.
Tile to Floor Side Option:Panels are standard with tile to floorside 1, raceway side 2. To specifyraceway side one and tile to floorside 2, change ‘‘FR’’ in patternnumber to ‘‘RF’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
34
Beltway PanelsTile to the Floor579 and 649 High
description height width depth pattern number 10 20 30 40
Deduct forMonolithic
side 1
579 Beltway Panelswith Tile to the Floor
56 13/169 189 39 DP8CBBFR5718 $1,025. $1,100. $1,146. $1,187. $91.
56 13/169 249 39 DP8CBBFR5724 1,149. 1,238. 1,291. 1,334. 115.
56 13/169 309 39 DP8CBBFR5730 1,238. 1,330. 1,389. 1,434. 119.
56 13/169 369 39 DP8CBBFR5736 1,353. 1,453. 1,517. 1,567. 125.
56 13/169 429 39 DP8CBBFR5742 1,444. 1,554. 1,622. 1,678. 131.
56 13/169 489 39 DP8CBBFR5748 1,542. 1,658. 1,732. 1,790. 136.
56 13/169 609 39 DP8CBBFR5760 1,727. 1,858. 1,940. 2,005. 136.
649 Beltway Panelswith Tile to the Floor
64 1/169 189 39 DP8CBBFR6418 1,083. 1,163. 1,211. 1,254. 98.
64 1/169 249 39 DP8CBBFR6424 1,210. 1,299. 1,356. 1,400. 121.
64 1/169 309 39 DP8CBBFR6430 1,295. 1,391. 1,450. 1,502. 121.
64 1/169 369 39 DP8CBBFR6436 1,434. 1,539. 1,604. 1,656. 138.
64 1/169 429 39 DP8CBBFR6442 1,529. 1,638. 1,709. 1,764. 146.
64 1/169 489 39 DP8CBBFR6448 1,633. 1,758. 1,836. 1,894. 159.
64 1/169 609 39 DP8CBBFR6460 1,834. 1,973. 2,059. 2,128. 159.
Dimensions listed under h w c are actual to the nearest 1/169
Ordering Information
Beltway Panel with Tile to theFloor:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway knockout option5. Base raceway finish6. Beltway finish7. Panel fabric
Order Code
Beltway Panel with Tile to theFloor:
Example: DP8CBBFR57184/117/K/117/117/B191
DP8CBBFR5718
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
117 Soft Grey beltway coverfinish
B191 Fairfield light fabric
Included with:
Beltway Panel with Tile to theFloor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Base raceway• Beltway with covers• Tile to the floor side 1
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Beltway Panel with Tile to theFloor:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For side 1 monolithic, side 2beltway, change ‘‘BB’’ in patternnumber to ‘‘MB’’ and deduct amountin far right column.
Tile to Floor Side Option:Panels are standard with tile to floorside 1, raceway side 2. To specifyraceway side one and tile to floorside 2, change ‘‘FR’’ in patternnumber to ‘‘RF’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
35
Pan
els,
Pre
-Con
figur
ed
Beltway PanelsTile to the Floor789 High
description height width depth pattern number 10 20 30 40
Deduct forMonolithic
side 1
789 Beltway Panelswith Tile to the Floor
78 9/169 189 39 DP8CBBFR7818 $1,339. $1,441. $1,505. $1,551. $89.
78 9/169 249 39 DP8CBBFR7824 1,494. 1,601. 1,667. 1,728. 102.
78 9/169 309 39 DP8CBBFR7830 1,593. 1,716. 1,790. 1,849. 105.
78 9/169 369 39 DP8CBBFR7836 1,755. 1,887. 1,973. 2,040. 123.
78 9/169 429 39 DP8CBBFR7842 1,880. 2,018. 2,115. 2,184. 126.
78 9/169 489 39 DP8CBBFR7848 2,059. 2,220. 2,316. 2,398. 156.
Dimensions listed under h w c are actual to the nearest 1/169
Ordering Information
Beltway Panel with Tile to theFloor:
1. Pattern Number2. Top cap type3. Top cap finish4. Base raceway knockout option5. Base raceway finish6. Beltway finish7. Panel fabric
Order Code
Beltway Panel with Tile to theFloor:
Example: DP8CBBFR78184/117/K/117/117/B191
DP8CBBFR7818
Pattern number
4 Radius Metal top cap
117 Soft Grey top cap finish
K Base raceway withknockouts both sides
117 Soft Grey base racewayfinish
117 Soft Grey beltway coverfinish
B191 Fairfield light fabric
Included with:
Beltway Panel with Tile to theFloor:
• Panel frame• Acoustic panel inserts• Top cap• Connection hardware• Base raceway• Beltway with covers• Tile to the floor side 1
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
Options
Beltway Panel with Tile to theFloor:
Full View Frame Option:To specify full view frames forwindow or stacking applications,replace the ‘‘C’’ in pattern numberwith ‘‘V’’. No upcharge.
Monolithic Side Option:For side 1 monolithic, side 2beltway, change ‘‘BB’’ in patternnumber to ‘‘MB’’ and deduct amountin far right column.
Tile to Floor Side Option:Panels are standard with tile to floorside 1, raceway side 2. To specifyraceway side one and tile to floorside 2, change ‘‘FR’’ in patternnumber to ‘‘RF’’.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Knockout Options:(K) = Knockouts on raceway side(N) = No Knockouts
Dividends Horizon
36
Topway and Full View Panel Frame AssembliesWorksurface Height, 369 and 429 High
description h w d pattern no. list
Worksurface HeightPanel Frame AssemblyStandard Base Raceway
28 1/29 159 39 DP8( )RRWH15 $417.
28 1/29 189 39 DP8( )RRWH18 417.
28 1/29 249 39 DP8( )RRWH24 426.
28 1/29 309 39 DP8( )RRWH30 439.
28 1/29 369 39 DP8( )RRWH36 464.
28 1/29 429 39 DP8( )RRWH42 509.
28 1/29 489 39 DP8( )RRWH48 509.
28 1/29 609 39 DP8( )RRWH60 579.
369 High Panel Frame AssemblyStandard Base Raceway
(topway and full view shown)
35 1/89 159 39 DP8( )RR3615 417.
35 1/89 189 39 DP8( )RR3618 417.
35 1/89 249 39 DP8( )RR3624 426.
35 1/89 309 39 DP8( )RR3630 439.
35 1/89 369 39 DP8( )RR3636 464.
35 1/89 429 39 DP8( )RR3642 509.
35 1/89 489 39 DP8( )RR3648 509.
35 1/89 609 39 DP8( )RR3660 579.
429 High Panel Frame AssemblyStandard Base Raceway
(topway and full view shown)
42 3/169 159 39 DP8( )RR4215 378.
42 3/169 189 39 DP8( )RR4218 378.
42 3/169 249 39 DP8( )RR4224 387.
42 3/169 309 39 DP8( )RR4230 417.
42 3/169 369 39 DP8( )RR4236 439.
42 3/169 429 39 DP8( )RR4242 470.
42 3/169 489 39 DP8( )RR4248 491.
42 3/169 609 39 DP8( )RR4260 553.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Panel Frame Assembly
1. Pattern Number2. Top cap type3. Top cap trim finish4. Raceway knockout option5. Base raceway finish if required
Order Code
Topway Panel Frame Assembly
Example: DP8CRR64484/117K/117
DP8CRR6448
Topway Panel FrameAssemblies with BaseRaceway
4 Radius metal topcap
117 Soft Grey top cap finish
K Raceway knockouts
117 Soft Grey raceway finish
Included with:
Panel Frame Assembly:
• Panel frame• Top cap (optional)• Connection hardware• Base raceway
Note: Worksurface Height panelframe assemblies are not availablewith plastic top caps.
Note: 159 wide panels are onlyavailable with standard baseraceway or tile to floor.
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers.
Options
Panel Frame Assembly:
Option:(C) = Topway Panel Frame(V) = Full View Panel Frame
Panel Base Options
Open Panel Base Option:For open panel base, change ’RR’ to’LL’.
Tile to Floor Option:For tile to floor on one side and baseraceway on the other side change’RR’ to ’FR’ and add $35 to listprice.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Base Raceway Knockout Options:(for RR and RF bases only)(K) = Knockouts on raceway side(N) = No knockouts
Dividends Horizon
37
Pan
els,
Bui
ld-T
o-S
pec
Topway and Full View Panel Frame Assemblies509, 579 and 649 High
description h w d pattern no. list
509 High Panel Frame AssemblyStandard Base Raceway
(topway and full view shown)
49 1/29 159 39 DP8( )RR5015 $387.
49 1/29 189 39 DP8( )RR5018 387.
49 1/29 249 39 DP8( )RR5024 405.
49 1/29 309 39 DP8( )RR5030 431.
49 1/29 369 39 DP8( )RR5036 448.
49 1/29 429 39 DP8( )RR5042 480.
49 1/29 489 39 DP8( )RR5048 501.
49 1/29 609 39 DP8( )RR5060 539.
579 High Panel Frame AssemblyStandard Base Raceway
(topway and full view shown)
56 13/169 159 39 DP8( )RR5715 387.
56 13/169 189 39 DP8( )RR5718 387.
56 13/169 249 39 DP8( )RR5724 405.
56 13/169 309 39 DP8( )RR5730 422.
56 13/169 369 39 DP8( )RR5736 446.
56 13/169 429 39 DP8( )RR5742 469.
56 13/169 489 39 DP8( )RR5748 492.
56 13/169 609 39 DP8( )RR5760 515.
649 High Panel Frame AssemblyStandard Base Raceway
(topway and full view shown)
64 1/169 159 39 DP8( )RR6415 408.
64 1/169 189 39 DP8( )RR6418 408.
64 1/169 249 39 DP8( )RR6424 435.
64 1/169 309 39 DP8( )RR6430 448.
64 1/169 369 39 DP8( )RR6436 475.
64 1/169 429 39 DP8( )RR6442 501.
64 1/169 489 39 DP8( )RR6448 527.
64 1/169 609 39 DP8( )RR6460 601.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Panel Frame Assembly
1. Pattern Number2. Top cap type3. Top cap trim finish4. Raceway knockout option5. Base raceway finish if required
Order Code
Topway Panel Frame Assembly
Example: DP8CRR64484/117K/117
DP8CRR6448
Topway Panel FrameAssembly with BaseRaceway
4 Radius metal topcap
117 Soft Grey top cap finish
K Raceway knockouts
117 Soft Grey raceway finish
Included with:
Panel Frame Assembly:
• Panel frame• Top cap (optional)• Connection hardware• Base raceway
Note: 159 wide panels are onlyavailable with a standard baseraceway or tile to floor.
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers
.
Options
Panel Frame Assembly:
Option:(C) = Topway Panel Frame(V) = Full View Panel Frame
Panel Base Options
Open Panel Base Option:For open panel base, change ’RR’ to’LL’.
Tile to Floor Option:For tile to floor on one side and baseraceway on the other side change’RR’ to ’FR’ and add $35 to listprice.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Base Raceway Knockout Options:(for RR and RF base only)(K) = Knockouts on raceway side(N) = No knockouts
Dividends Horizon
38
Topway and Full View Panel Frame Assemblies789 High
description h w d pattern no. list
789 High Panel Frame AssemblyStandard Base Raceway
(topway and full view shown)
78 9/169 159 39 DP8( )RR7815 $592.
78 9/169 189 39 DP8( )RR7818 592.
78 9/169 249 39 DP8( )RR7824 622.
78 9/169 309 39 DP8( )RR7830 647.
78 9/169 369 39 DP8( )RR7836 686.
78 9/169 429 39 DP8( )RR7842 724.
78 9/169 489 39 DP8( )RR7848 752.
Dimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Panel Frame Assembly
1. Pattern Number2. Top cap type3. Top cap trim finish4. Raceway knockout option5. Base raceway finish if required
Order Code
Topway Panel Frame Assembly
Example: DP8CRR78484/117K/117
DP8CRR7848
Topway Panel FrameAssembly with BaseRaceway
4 Radius metal topcap
117 Soft Grey top cap finish
K Raceway knockouts
117 Soft Grey raceway finish
Included with:
Panel Frame Assembly:
• Panel frame• Top cap (optional)• Connection hardware• Base raceway
Note: 159 wide panels are onlyavailable with a standard baseraceway or tile to floor.
Note: Panel to panel connectorspecified separately: DP8PPC for allDP8 to DP8 same height and typepanel connections. DP8HLC for allothers.
Options
Panel Frame Assembly:
Option:(C) = Topway Panel Frame(V) = Full View Panel Frame
Panel Base Options
Open Panel Base Option:For open panel base, change ’RR’ to’LL’.
Tile to Floor Option:For tile to floor on one side and baseraceway on the other side change’RR’ to ’FR’ and add $35 to listprice.
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Base Raceway Knockout Options:(for RR and RF base only)(K) = Knockouts on raceway side(N) = No knockouts
Dividends Horizon
39
Pan
els,
Bui
ld-T
o-S
pec
Base Raceway Covers
description h w d pattern no. list
Base Raceway Covers 69 159 1/89 DP8PBRN15 $80.
69 189 1/89 DP8PBR( )18 83.
69 249 1/89 DP8PBR( )24 86.
69 309 1/89 DP8PBR( )30 90.
69 369 1/89 DP8PBR( )36 101.
69 429 1/89 DP8PBR( )42 105.
69 489 1/89 DP8PBR( )48 110.
69 609 1/89 DP8PBR( )60 117.
69 729 1/89 DP8PBR( )72 121.
69 849 1/89 DP8PBR( )84 127.
69 969 1/89 DP8PBR( )96 131.
Dimensions listed under h w d are actual to the nearest 1 1/169.
Ordering Information
Base Raceway
1. Pattern Number2. Raceway knockout option3. Raceway trim finish
Order Code
Topway Panel Frame Assembly
Example: DP8PBRK60117
DP8PBR Base Raceway
K Raceway knockouts
117 Soft Grey raceway finish
Options
Base Raceway Knockout Options:(for RR and RF base only)
(K) = Knockouts on raceway side(N) = No knockouts
Dividends Horizon
40
Stack FramesD1 Style With External Reveal(For Use With Topway Panels Only)
description h w d pattern no. with topwayfull view
(without topway)
289 High Stack Panel Frame Only(full view shown)
29 1/49 189 39 DP2S(T/N)F 2818 $255. $307.
29 1/49 249 39 DP2S(T/N)F 2824 260. 321.
29 1/49 309 39 DP2S(T/N)F 2830 282. 341.
29 1/49 369 39 DP2S(T/N)F 2836 318. 367.
29 1/49 429 39 DP2S(T/N)F 2842 340. 399.
29 1/49 489 39 DP2S(T/N)F 2848 356. 409.
219 High Stack Panel Frame Only 21 7/89 189 39 DP2STF 2118 261. n/a
21 7/89 249 39 DP2STF 2124 279. n/a
21 7/89 309 39 DP2STF 2130 299. n/a
21 7/89 369 39 DP2STF 2136 329. n/a
21 7/89 429 39 DP2STF 2142 361. n/a
21 7/89 489 39 DP2STF 2148 376. n/a
149 High Stack Panel, load bearing 149 189 39 DP2 STFL1418 211. n/a
149 249 39 DP2 STFL1424 220. n/a
149 309 39 DP2 STFL1430 255. n/a
149 369 39 DP2 STFL1436 281. n/a
149 429 39 DP2 STFL1442 314. n/a
149 489 39 DP2 STFL1448 333. n/a
149 High Stack Panelnon-load bearing
149 189 39 DP2S(T/N)F 1418 211. 255.
149 249 39 DP2S(T/N)F 1424 220. 260.
149 309 39 DP2S(T/N)F 1430 255. 282.
149 369 39 DP2S(T/N)F 1436 281. 318.
149 429 39 DP2S(T/N)F 1442 314. 340.
149 489 39 DP2S(T/N)F 1448 333. 356.
NOTE: D1 Stack Frames may be used with Topway Panels only.
Ordering Information
Stack Panel Frame
1. Pattern Number2. Trim Finish
Order Code
Stack Panel Frame
Example: DP2STF 1448, 113
DP1STF1448
Pattern Number
113 Dark grey paint finish
Stack Panel Post
Example: DP2ASPO 14
DP2ASPO14
Pattern Number
Included with:
Stack Panel Frame
Note: When stacking (2) D1 stylestack frames, the stack frame in thefirst tier position must have atopway trough to be able to acceptthe second tier stack frame.
Options
Stack Panel FrameStack frame option:(T) = with topway(N) = without topway
Note: 219 stack panel frame notavailable without a topway.
Note: D1 Stack Frames are loadbearing on first tier only.
Dividends Horizon
41
Pan
els,
Bui
ld-T
o-S
pec
Stack FramesD2 Style With Recessed Reveal(For Use With DP8 Full View Panels Only)
description w h d pattern no. list
149 High Dividends Stack Frame 189 14 5/89 39 DPS7V1418( ) $321.
249 14 5/89 39 DPS7V1424( ) 325.
309 14 5/89 39 DPS7V1430( ) 354.
369 14 5/89 39 DPS7V1436( ) 384.
429 14 5/89 39 DPS7V1442( ) 399.
489 14 5/89 39 DPS7V1448( ) 408.
609 14 5/89 39 DPS7V1460( ) 422.
219 High Dividends Stack Frame 189 21 7/89 39 DPS7V2118( ) 373.
249 21 7/89 39 DPS7V2124( ) 393.
309 21 7/89 39 DPS7V2130( ) 409.
369 21 7/89 39 DPS7V2136( ) 438.
429 21 7/89 39 DPS7V2142( ) 450.
489 21 7/89 39 DPS7V2148( ) 465.
609 21 7/89 39 DPS7V2160( ) 487.
289 High Dividends Stack Frame 189 29 1/49 39 DPS7V2818( ) 355.
249 29 1/49 39 DPS7V2824( ) 375.
309 29 1/49 39 DPS7V2830( ) 400.
369 29 1/49 39 DPS7V2836( ) 431.
429 29 1/49 39 DPS7V2842( ) 450.
489 29 1/49 39 DPS7V2848( ) 466.
609 29 1/49 39 DPS7V2860( ) 503.
NOTE: D2 Stack Frames may be used with DP8 Full View Panels only.
Ordering Information
Stack Frames:
1. Pattern Number2. Tile Support Configuration
Order Code
Stack Panel Frame Assembly
Example: DPS7V1418TT
DPS7 Stack Panel Frame
V Full View
14 Height
18 Width
TT Segmented Tile SupportsBoth Side
Included with:
Stack Panel Frame:
• Stack Frame
Note: Slatwall tiles, single pane anddouble pane window kits cannot beused with D2 stack frames.
Note: D2 Stack Frames are loadbearing on first and second tier.
Options
Tile Options/Pattern NumberSuffix:(TT) = Tile support located at thebase of stacker to supportsegmented tiles on both sides of apanel.
(TM) = Tile support located at thebase of the stacker to supportsegmented tiles on one side and amonolithic tile on the other side ofthe panel.
(MM) = Monolithic tiles on bothsides of the panel.
Dividends Horizon
42
Monolithic Panel Fabric InsertsFor Worksurface Height, 369, 429 and 509 High Panel Frames
description w* w h d pattern no.grade
10 20 30 40
Worksurface Height Individual Monolithic FabricInsert (For worksurface height Panel Frame only)
159 14 5/89 22 1/29 7/169 DP1SOWH15 $145. $166. $184. $201.
189 17 5/89 22 1/29 7/169 DP1SOWH18 145. 166. 184. 201.
249 23 5/89 22 1/29 7/169 DP1SOWH24 180. 206. 224. 237.
309 29 5/89 22 1/29 7/169 DP1SOWH30 198. 224. 244. 264.
369 35 5/89 22 1/29 7/169 DP1SOWH36 215. 244. 275. 289.
429 41 5/89 22 1/29 7/169 DP1SOWH42 223. 246. 277. 295.
489 47 5/89 22 1/29 7/169 DP1SOWH48 233. 264. 286. 314.
609 59 5/89 22 1/29 7/169 DP1SOWH60 266. 284. 300. 319.
729 71 5/89 22 1/29 7/169 DP1SOWH72RR* 419. 451. 471. 486.
849 83 5/89 22 1/29 7/169 DP1SOWH84RR* 437. 469. 488. 507.
969 95 5/89 22 1/29 7/169 DP1SOWH96RR* 482. 517. 540. 559.
289 High Individual Tiled Fabric Insert 159 14 5/89 299 7/169 DP1SO2815 162. 172. 185. 205.
189 17 5/89 299 7/169 DP1SO2818 162. 172. 185. 205.
249 23 5/89 299 7/169 DP1SO2824 184. 212. 233. 244.
309 29 5/89 299 7/169 DP1SO2830 204. 233. 249. 271.
369 35 5/89 299 7/169 DP1SO2836 220. 249. 282. 299.
429 42 5/89 299 7/169 DP1SO2842 230. 250. 284. 304.
489 47 5/89 299 7/169 DP1SO2848 238. 271. 296. 318.
609 59 5/89 299 7/169 DP1SO2860 282. 301. 314. 331.
729 71 5/89 299 7/169 DP1SO2872RR* 524. 561. 601. 642.
849 83 5/89 299 7/169 DP1SO2884RR* 545. 582. 624. 668.
969 95 5/89 299 7/169 DP1SO2896RR* 579. 620. 663. 678.
359 High Individual Monolithic Fabric Insert(For 429H Panel Frame)
159 14 5/89 36 3/89 7/169 DP1SO4215 168. 191. 210. 224.
189 17 5/89 36 3/89 7/169 DP1SO4218 168. 191. 210. 224.
249 23 5/89 36 3/89 7/169 DP1SO4224 191. 216. 234. 248.
309 29 5/89 36 3/89 7/169 DP1SO4230 210. 244. 268. 278.
369 35 5/89 36 3/89 7/169 DP1SO4236 234. 272. 281. 304.
429 41 5/89 36 3/89 7/169 DP1SO4242 271. 300. 325. 343.
489 47 5/89 36 3/89 7/169 DP1SO4248 281. 321. 348. 365.
609 59 5/89 36 3/89 7/169 DP1SO4260 293. 318. 332. 343.
729 71 5/89 36 3/89 7/169 DP1SO4272RR* 538. 576. 615. 659.
849 83 5/89 36 3/89 7/169 DP1SO4284RR* 551. 591. 631. 674.
969 95 5/89 36 3/89 7/169 DP1SO4296RR* 602. 631. 686. 737.
* Note: 729, 849, 969; Inserts are only available with Railroad Fabric.w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Monolithic Fabric Inserts
1. Pattern Number2. Fabric
Order Code
Monolithic Fabric Inserts
Example: DP1 SO6442, W1077
DP1SO6442
Pattern Number
W1077 Element
Included with:
Monolithic Fabric Inserts
• Attachment clipsNote: Worksurface heightmonolithic tiles are to be used withworksurface height panel framesonly.
Options
Monolithic Fabric Inserts
Tile to Floor Option:To specify tile to floor for use withpanel frames, add an ‘‘F’’ suffix tothe pattern number and add $11 tothe list price.
Railroading fabric option:To specify railroaded fabric, add‘‘RR’’ to the suffix of the patternnumber.
Note: Tile to floor option availablefor Worksurface Heights, 369, 429,509, 579, 649 and 789 panel heights.
Dividends Horizon
43
Pan
els,
Bui
ld-T
o-S
pec
Monolithic Panel Fabric InsertsFor Worksurface Height, 369, 429 and 509 High Panel Frames
description w* w h d pattern no.grade
10 20 30 40
429 High Individual Monolithic Fabric Insert(For 509H Panel Frame)
159 14 5/89 43 11/169 7/169 DP1SO5015 $186. $210. $229. $244.
189 17 5/89 43 11/169 7/169 DP1SO5018 186. 210. 229. 244.
249 23 5/89 43 11/169 7/169 DP1SO5024 208. 237. 252. 273.
309 29 5/89 43 11/169 7/169 DP1SO5030 234. 272. 287. 304.
369 35 5/89 43 11/169 7/169 DP1SO5036 272. 301. 325. 347.
429 41 5/89 43 11/169 7/169 DP1SO5042 297. 340. 362. 382.
489 47 5/89 43 11/169 7/169 DP1SO5048 330. 369. 397. 418.
609 59 5/89 43 11/169 7/169 DP1SO5060 377. 409. 430. 440.
729 71 5/89 43 11/169 7/169 DP1SO5072RR* 618. 661. 689. 713.
849 83 5/89 43 11/169 7/169 DP1SO5084RR* 626. 670. 699. 722.
969 95 5/89 43 11/169 7/169 DP1SO5096RR* 637. 682. 711. 733.
* Note: 729, 849, 969; Inserts are only available with Railroad Fabric.w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Monolithic Fabric Inserts
1. Pattern Number2. Fabric
Order Code
Monolithic Fabric Inserts
Example: DP1 SO6442, W1077
DP1SO6442
Pattern Number
W1077 Element
Included with:
Monolithic Fabric Inserts
• Attachment clipsNote: Worksurface heightmonolithic tiles are to be used withworksurface height panel framesonly.
Options
Monolithic Fabric Inserts
Tile to Floor Option:To specify tile to floor for use withpanel frames, add an ‘‘F’’ suffix tothe pattern number and add $11 tothe list price.
Railroading fabric option:To specify railroaded fabric, add‘‘RR’’ to the suffix of the patternnumber.
Note: Tile to floor option availablefor Worksurface Heights, 369, 429,509, 579, 649 and 789 panel heights.
Dividends Horizon
44
Monolithic Panel Fabric InsertsFor 579, 649 and 789 High Panel Frames
description w* w h d pattern no.grade
10 20 30 40
499 High Individual Monolithic Fabric Insert(For 579H Panel Frame)
159 14 5/89 50 1/169 7/169 DP1SO5715 $206. $224. $234. $241.
189 17 5/89 50 1/169 7/169 DP1SO5718 206. 224. 234. 241.
249 23 5/89 50 1/169 7/169 DP1SO5724 230. 245. 261. 272.
309 29 5/89 50 1/169 7/169 DP1SO5730 266. 284. 294. 305.
369 35 5/89 50 1/169 7/169 DP1SO5736 294. 320. 333. 348.
429 41 5/89 50 1/169 7/169 DP1SO5742 329. 351. 366. 382.
489 47 5/89 50 1/169 7/169 DP1SO5748 355. 380. 400. 413.
609 59 5/89 50 1/169 7/169 DP1SO5760 410. 440. 464. 482.
569 High Individual Monolithic Fabric Insert(For 649H Panel Frame)
159 14 5/89 58 1/49 7/169 DP1SO6415 229. 263. 279. 293.
189 17 5/89 58 1/49 7/169 DP1SO6418 229. 263. 279. 293.
249 23 5/89 58 1/49 7/169 DP1SO6424 246. 282. 301. 319.
309 29 5/89 58 1/49 7/169 DP1SO6430 289. 330. 353. 370.
369 35 5/89 58 1/49 7/169 DP1SO6436 321. 365. 391. 410.
429 41 5/89 58 1/49 7/169 DP1SO6442 351. 395. 422. 442.
489 47 5/89 58 1/49 7/169 DP1SO6448 383. 431. 463. 484.
609 59 5/89 58 1/49 7/169 DP1SO6460 397. 431. 446. 468.
709 High Individual Monolithic Fabric Insert(For 789H Panel Frame)
159 14 5/89 72 7/89 7/169 DP1SO7815 268. 282. 297. 305.
189 17 5/89 72 7/89 7/169 DP1SO7818 268. 282. 297. 305.
249 23 5/89 72 7/89 7/169 DP1SO7824 314. 333. 349. 362.
309 29 5/89 72 7/89 7/169 DP1SO7830 351. 380. 397. 410.
369 35 5/89 72 7/89 7/169 DP1SO7836 391. 421. 440. 461.
429 41 5/89 72 7/89 7/169 DP1SO7842 437. 472. 490. 512.
489 47 5/89 72 7/89 7/169 DP1SO7848 479. 520. 543. 558.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Monolithic Fabric Inserts
1. Pattern Number2. Fabric
Order Code
Monolithic Fabric Inserts
Example: DP1 SO6442, W1077
DP1SO6442
Pattern Number
W1077 Element
Included with:
Monolithic Fabric Inserts
• Attachment clips
Note: Worksurface heightmonolithic tiles are to be used withworksurface height panel framesonly.
Options
Monolithic Fabric Inserts
Tile to Floor Option:To specify tile to floor for use withpanel frames, add an ‘‘F’’ suffix tothe pattern number and add $11 tothe list price.
Railroading fabric option:To specify railroaded fabric, add‘‘RR’’ to the suffix of the patternnumber.
Note: Tile to floor option availablefor Worksurface Heights, 369, 429,509 579, 649 and 789 panel heights.
Dividends Horizon
45
Pan
els,
Bui
ld-T
o-S
pec
Monolithic Laminate InsertsFor Worksurface Height, 369 and 429 High Panel FramesBase Raceway or Open Base
description w * w h d pattern no. List
Worksurface Height Individual MonolithicLaminate Insert Base Raceway or Open Base(For worksurface height panel frame only)
159 14 5/89 22 1/29 7/169 DP3L1WH15 $262.
189 17 5/89 22 1/29 7/169 DP3L1WH18 276.
249 23 5/89 22 1/29 7/169 DP3L1WH24 315.
309 29 5/89 22 1/29 7/169 DP3L1WH30 366.
369 35 5/89 22 1/29 7/169 DP3L1WH36 397.
429 41 5/89 22 1/29 7/169 DP3L1WH42 475.
489 47 5/89 22 1/29 7/169 DP3L1WH48 482.
289 High Individual Monolithic Laminate InsertBase Raceway or Open Base(For 369H Panel Frame)
159 14 5/89 299 7/169 DP3L12815 262.
189 17 5/89 299 7/169 DP3L12818 276.
249 23 5/89 299 7/169 DP3L12824 315.
309 29 5/89 299 7/169 DP3L12830 366.
369 35 5/89 299 7/169 DP3L12836 397.
429 41 5/89 299 7/169 DP3L12842 475.
489 47 5/89 299 7/169 DP3L12848 482.
359 High Individual Monolithic Laminate InsertBase Raceway or Open Base(For 429H Panel Frame)
159 14 5/89 36 3/89 7/169 DP3L14215 314.
189 17 5/89 36 3/89 7/169 DP3L14218 344.
249 23 5/89 36 3/89 7/169 DP3L14224 391.
309 29 5/89 36 3/89 7/169 DP3L14230 470.
369 35 5/89 36 3/89 7/169 DP3L14236 637.
429 41 5/89 36 3/89 7/169 DP3L14242 669.
489 47 5/89 36 3/89 7/169 DP3L14248 673.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Monolithic Laminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Monolithic Laminate Inserts
Example: DP3L14224
DP3L14224
Pattern Number
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Monolithic Laminate Inserts
• Attachment clips
Note: Worksurface heightmonolithic tiles are to be used withworksurface height panel framesonly.
Dividends Horizon
46
Monolithic Laminate InsertsFor Worksurface Height, 369 and 429 High Panel FramesTile To Floor
description w * w d pattern no. List
Worksurface Height Individual MonolithicLaminate Insert Tile To Floor(For worksurface height panel frame only)
159 14 5/89 7/169 DP3L1WH15F $262.
189 17 5/89 7/169 DP3L1WH18F 276.
249 23 5/89 7/169 DP3L1WH24F 315.
309 29 5/89 7/169 DP3L1WH30F 366.
369 35 5/89 7/169 DP3L1WH36F 397.
429 41 5/89 7/169 DP3L1WH42F 475.
489 47 5/89 7/169 DP3L1WH48F 482.
369 High Individual Monolithic Laminate InsertTile To Floor(For 369H panel frame)
159 14 5/89 7/169 DP3L12815F 262.
189 17 5/89 7/169 DP3L12818F 276.
249 23 5/89 7/169 DP3L12824F 315.
309 29 5/89 7/169 DP3L12830F 366.
369 35 5/89 7/169 DP3L12836F 397.
429 41 5/89 7/169 DP3L12842F 475.
489 47 5/89 7/169 DP3L12848F 482.
429 High Individual Monolithic Laminate InsertTile To Floor(For 429H panel frame)
159 14 5/89 7/169 DP3L14215F 318.
189 17 5/89 7/169 DP3L14218F 366.
249 23 5/89 7/169 DP3L14224F 410.
309 29 5/89 7/169 DP3L14230F 475.
369 35 5/89 7/169 DP3L14236F 641.
429 41 5/89 7/169 DP3L14242F 673.
489 47 5/89 7/169 DP3L14248F 682.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Monolithic Laminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Monolithic Laminate Inserts
Example: DP3L14224F
DP3L14224F
Pattern Number
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Monolithic Laminate Inserts
• Attachment clips
Note: Worksurface heightmonolithic tiles are to be used withworksurface height panel framesonly.
Dividends Horizon
47
Pan
els,
Bui
ld-T
o-S
pec
Monolithic Laminate InsertsFor 509 and 579 High Panel FramesBase Raceway or Open Base
description w * w h d pattern no. List
429 High Individual Monolithic Laminate InsertBase Raceway or Open Base(For 509H Panel Frame)
159 14 5/89 43 11/169 7/169 DP3L15015 $320.
189 17 5/89 43 11/169 7/169 DP3L15018 370.
249 23 5/89 43 11/169 7/169 DP3L15024 413.
309 29 5/89 43 11/169 7/169 DP3L15030 479.
369 35 5/89 43 11/169 7/169 DP3L15036 644.
429 41 5/89 43 11/169 7/169 DP3L15042 678.
489 47 5/89 43 11/169 7/169 DP3L15048 684.
499 High Individual Monolithic Laminate InsertBase Raceway or Open Base(For 579H Panel Frame)
159 14 5/89 50 1/169 7/169 DP3L15715 373.
189 17 5/89 50 1/169 7/169 DP3L15718 402.
249 23 5/89 50 1/169 7/169 DP3L15724 480.
309 29 5/89 50 1/169 7/169 DP3L15730 602.
369 35 5/89 50 1/169 7/169 DP3L15736 653.
429 41 5/89 50 1/169 7/169 DP3L15742 799.
489 47 5/89 50 1/169 7/169 DP3L15748 805.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Monolithic Laminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Monolithic Laminate Inserts
Example: DP3L15024
DP3L15024
Pattern Number
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Monolithic Laminate Inserts
• Attachment clips
Note: Worksurface heightmonolithic tiles are to be used withworksurface height panel framesonly.
Dividends Horizon
48
Monolithic Laminate InsertsFor 509 and 579 High Panel FramesTile To Floor
description w * w d pattern no. List
509 High Individual Monolithic Laminate InsertTile To Floor(For 509H panel frame)
159 14 5/89 7/169 DP3L15015F $372.
189 17 5/89 7/169 DP3L15018F 398.
249 23 5/89 7/169 DP3L15024F 477.
309 29 5/89 7/169 DP3L15030F 598.
369 35 5/89 7/169 DP3L15036F 649.
429 41 5/89 7/169 DP3L15042F 793.
489 47 5/89 7/169 DP3L15048F 802.
579 High Individual Monolithic Laminate InsertTile To Floor(for 579H panel frame)
159 14 5/89 7/169 DP3L15715F 380.
189 17 5/89 7/169 DP3L15718F 408.
249 23 5/89 7/169 DP3L15724F 484.
309 29 5/89 7/169 DP3L15730F 606.
369 35 5/89 7/169 DP3L15736F 659.
429 41 5/89 7/169 DP3L15742F 803.
489 47 5/89 7/169 DP3L15748F 809.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Monolithic Laminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Monolithic Laminate Inserts
Example: DP3L15024F
DP3L15024F
Pattern Number
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Monolithic Laminate Inserts
• Attachment clips
Note: Worksurface heightmonolithic tiles are to be used withworksurface height panel framesonly.
Dividends Horizon
49
Pan
els,
Bui
ld-T
o-S
pec
Tiled Fabric Inserts79, 109 and 149 High
description w * w h d pattern no.grade
10 20 30 40
79 High Individual Tiled Fabric Insert 159 14 5/89 7 3/169 7/169 DP1SO715 $84. $97. $118. $124.
189 17 5/89 7 3/169 7/169 DP1SO718 84. 97. 118. 124.
249 23 5/89 7 3/169 7/169 DP1SO724 88. 113. 121. 132.
309 29 5/89 7 3/169 7/169 DP1SO730 100. 124. 136. 144.
369 35 5/89 7 3/169 7/169 DP1SO736 118. 136. 144. 152.
429 41 5/89 7 3/169 7/169 DP1SO742 124. 143. 156. 162.
489 47 5/89 7 3/169 7/169 DP1SO748 133. 149. 162. 188.
609 59 5/89 7 3/169 7/169 DP1SO760 144. 158. 163. 169.
109 High Individual Tiled Fabric Insert 159 14 5/89 10 7/89 7/169 DP1SO1015 108. 120. 128. 131.
189 17 5/89 10 7/89 7/169 DP1SO1018 108. 120. 128. 131.
249 23 5/89 10 7/89 7/169 DP1SO1024 117. 129. 132. 141.
309 29 5/89 10 7/89 7/169 DP1SO1030 120. 131. 140. 145.
369 35 5/89 10 7/89 7/169 DP1SO1036 128. 140. 151. 174.
429 41 5/89 10 7/89 7/169 DP1SO1042 131. 145. 169. 178.
489 47 5/89 10 7/89 7/169 DP1SO1048 140. 161. 178. 183.
609 59 5/89 10 7/89 7/169 DP1SO1060 145. 162. 171. 176.
149 High Individual Tiled Fabric Insert 159 14 5/89 14 3/169 7/169 DP1SO1415 130. 144. 155. 161.
189 17 5/89 14 3/169 7/169 DP1SO1418 130. 144. 155. 161.
249 23 5/89 14 3/169 7/169 DP1SO1424 142. 158. 162. 174.
309 29 5/89 14 3/169 7/169 DP1SO1430 144. 161. 169. 180.
369 35 5/89 14 3/169 7/169 DP1SO1436 155. 169. 184. 209.
429 41 5/89 14 3/169 7/169 DP1SO1442 161. 180. 206. 215.
489 47 5/89 14 3/169 7/169 DP1SO1448 169. 198. 215. 223.
609 59 5/89 149 3/169 7/169 DP1SO1460 180. 200. 207. 213.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Tiled Inserts
1. Pattern Number2. Fabric
Order Code
Tiled Inserts
Example: DP1 SO1436, W234-5
DP1SO1436
Pattern Number
W234-5 Peano Sand fabric
Included with:
Tiled Inserts
• Attachment clips
Note: Tiled insert supports must beordered separately (see oppositepage for quantities required).
Options
Tiled Inserts
Tile to Floor Option:To specify tile to floor for use withpanel frames, add an ‘‘F’’ suffix tothe pattern number and add $11 tothe list price.
Railroading fabric option:To specify railroaded fabric, add‘‘RR’’ to the suffix of the patternnumber.
Note: Tile to floor option availablefor 149 and 289 High inserts.
Dividends Horizon
50
Tiled Fabric Inserts219 and 289 High
description w * w h d pattern no.grade
10 20 30 40
219 High Individual Tiled Fabric Insert 159 14 5/89 21 3/169 7/169 DP1SO2115 $155. $179. $194. $212.
189 17 5/89 21 3/169 7/169 DP1SO2118 155. 179. 194. 212.
249 23 5/89 21 3/169 7/169 DP1SO2124 190. 222. 241. 252.
309 29 5/89 21 3/169 7/169 DP1SO2130 207. 241. 259. 278.
369 35 5/89 21 3/169 7/169 DP1SO2136 229. 259. 292. 310.
429 41 5/89 21 3/169 7/169 DP1SO2142 237. 262. 296. 317.
489 47 5/89 21 3/169 7/169 DP1SO2148 249. 278. 308. 333.
609 59 5/89 21 3/169 7/169 DP1SO2160 273. 296. 309. 318.
289 High Individual Tiled Fabric Insert 159 14 5/89 299 7/169 DP1SO2815 162. 172. 185. 205.
189 17 5/89 299 7/169 DP1SO2818 162. 172. 185. 205.
249 23 5/89 299 7/169 DP1SO2824 184. 212. 233. 244.
309 29 5/89 299 7/169 DP1SO2830 204. 233. 249. 271.
369 35 5/89 299 7/169 DP1SO2836 220. 249. 282. 299.
429 42 5/89 299 7/169 DP1SO2842 230. 250. 284. 304.
489 47 5/89 299 7/169 DP1SO2848 238. 271. 296. 318.
609 59 5/89 299 7/169 DP1SO2860 282. 301. 314. 331.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/16
Ordering Information
Tiled Inserts
1. Pattern Number2. Fabric
Order Code
Tiled Inserts
Example: DP1 SO1436, W234-5
DP1SO1436
Pattern Number
W234-5 Peano Sand fabric
Included With:
Tiled Inserts
• Attachment clips
Note: Tiled insert supports must beordered separately (see oppositepage for quantities required).
Options
Tiled Inserts
Tile to Floor Option:To specify tile to floor for use withpanel frames, add an ‘‘F’’ suffix tothe pattern number and add $11 tothe list price.
Railroading fabric option:To specify railroaded fabric, add‘‘RR’’ to the suffix of the patternnumber.
Note: Tile to floor option availablefor 149 and 289 High inserts.
Dividends Horizon
51
Pan
els,
Bui
ld-T
o-S
pec
Tiled Fabric InsertsTile Supports
description w * d pattern no. list
D1 Tile Support/ External Reveal 159 5/89 DP1SOS15 $47.
189 5/89 DP1SOS18 47.
249 5/89 DP1SOS24 48.
309 5/89 DP1SOS30 54.
369 5/89 DP1SOS36 55.
429 5/89 DP1SOS42 58.
489 5/89 DP1SOS48 58.
609 5/89 DP1SOS60 63.
D2 Tile Support/ Recessed Reveal 159 DP2SOS15 42.
189 DP2SOS18 42.
249 DP2SOS24 43.
309 DP2SOS30 47.
369 DP2SOS36 48.
429 DP2SOS42 54.
489 DP2SOS48 54.
609 DP2SOS60 58.
D2 Tile Support Mounting Brackets (pair) DP2SOSC 0.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
D1 Tile Support / External Reveal
1. Pattern Number2. Trim Finish
D2 Tile Support / RecessedReveal
1. Pattern Number
Order Code
D1 Tile Support / External RevealSupportsExample: DP1 SOS18, 117
DP1SOS18
Pattern Number
117 Soft Grey trim finish
Included with:
Note: D2 insert supports requiremounting brackets.
Options
Tiled Insert Supports
Dividends Horizon
52
Tiled Laminate Inserts79, 109, 149, 219 and 289 HighBase Raceway or Open Base
description w* w h d pattern no. list
79 High Individual Tiled Laminate InsertBase Raceway or Open Base
159 14 5/89 7 3/169 7/169 DP3L10715 $174.
189 17 5/89 7 3/169 7/169 DP3L10718 176.
249 23 5/89 7 3/169 7/169 DP3L10724 183.
309 29 5/89 7 3/169 7/169 DP3L10730 188.
369 35 5/89 7 3/169 7/169 DP3L10736 213.
429 41 5/89 7 3/169 7/169 DP3L10742 220.
489 47 5/89 7 3/169 7/169 DP3L10748 228.
109 High Individual Tiled Laminate InsertBase Raceway or Open Base
159 14 5/89 10 3/169 7/169 DP3L11015 178.
189 17 5/89 10 3/169 7/169 DP3L11018 183.
249 23 5/89 10 3/169 7/169 DP3L11024 188.
309 29 5/89 10 3/169 7/169 DP3L11030 208.
369 35 5/89 10 3/169 7/169 DP3L11036 237.
429 41 5/89 10 3/169 7/169 DP3L11042 245.
489 47 5/89 10 3/169 7/169 DP3L11048 252.
149 High Individual Tiled Laminate InsertBase Raceway or Open Base
159 14 5/89 14 3/169 7/169 DP3L11415 183.
189 17 5/89 14 3/169 7/169 DP3L11418 185.
249 23 5/89 14 3/169 7/169 DP3L11424 204.
309 29 5/89 14 3/169 7/169 DP3L11430 224.
369 35 5/89 14 3/169 7/169 DP3L11436 264.
429 41 5/89 14 3/169 7/169 DP3L11442 272.
489 47 5/89 14 3/169 7/169 DP3L11448 276.
219 High Individual Tiled Laminate InsertBase Raceway or Open Base
159 14 5/89 21 3/169 7/169 DP3L12115 201.
189 17 5/89 21 3/169 7/169 DP3L12118 220.
249 23 5/89 21 3/169 7/169 DP3L12124 261.
309 29 5/89 21 3/169 7/169 DP3L12130 266.
369 35 5/89 21 3/169 7/169 DP3L12136 380.
429 41 5/89 21 3/169 7/169 DP3L12142 385.
489 47 5/89 21 3/169 7/169 DP3L12148 391.
289 High Individual Tiled Laminate InsertBase Raceway or Open Base
159 14 5/89 299 7/169 DP3L12815 262.
189 17 5/89 299 7/169 DP3L12818 276.
249 23 5/89 299 7/169 DP3L12824 315.
309 29 5/89 299 7/169 DP3L12830 366.
369 35 5/89 299 7/169 DP3L12836 397.
429 41 5/89 299 7/169 DP3L12842 475.
489 47 5/89 299 7/169 DP3L12848 482.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Tiled Laminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Tiled Laminate Inserts
Example: DP3L10724
DP3L10724
Pattern Number
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Tiled Laminate Inserts
• Attachment clips
Note: Tiled insert supports must beordered separately (see oppositepage for quantities required)
Dividends Horizon
53
Pan
els,
Bui
ld-T
o-S
pec
Tiled Laminate Inserts149 and 289 HighTile To Floor
description w* w d pattern no. list
149 High Individual Tiled Laminate InsertTile to Floor
159 14 5/89 7/169 DP3L11415F $191.
189 17 5/89 7/169 DP3L11418F 205.
249 23 5/89 7/169 DP3L11424F 223.
309 29 5/89 7/169 DP3L11430F 250.
369 35 5/89 7/169 DP3L11436F 297.
429 41 5/89 7/169 DP3L11442F 319.
489 47 5/89 7/169 DP3L11448F 325.
289 High Individual Tiled Laminate InsertTile to Floor
159 14 5/89 7/169 DP3L12815F 262.
189 17 5/89 7/169 DP3L12818F 276.
249 23 5/89 7/169 DP3L12824F 315.
309 29 5/89 7/169 DP3L12830F 366.
369 35 5/89 7/169 DP3L12836F 397.
429 41 5/89 7/169 DP3L12842F 475.
489 47 5/89 7/169 DP3L12848F 482.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Tiled Laminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Tiled Laminate Inserts
Example: DP3L11424F
DP3L11424F
Pattern Number
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Tiled Laminate Inserts
• Attachment clips
Note: Tiled insert supports must beordered separately (see oppositepage for quantities required)
Dividends Horizon
54
Beltway InsertsLower Fabric InsertsBeltway Cover and Insert Supports
description w* w h d pattern no.grade
10 20 30 40
89 High Fabric Beltway Lower Insert,(For Worksurface Height BelowWorksurface Beltway Panels)
189 17 5/89 7 7/89 7/169 DP1SO0818 $76. $88. $108. $113.
249 23 5/89 7 7/89 7/169 DP1SO0824 79. 102. 111. 121.
309 29 5/89 7 7/89 7/169 DP1SO0830 91. 113. 124. 132.
369 35 5/89 7 7/89 7/169 DP1SO0836 108. 124. 132. 140.
429 41 5/89 7 7/89 7/169 DP1SO0842 113. 131. 142. 146.
489 47 5/89 7 7/89 7/169 DP1SO0848 122. 136. 146. 172.
609 59 5/89 7 7/89 7/169 DP1SO0860 132. 143. 147. 155.
109 High Fabric Beltway Lower Insert,(For Below Worksurface BeltwayPanels with Tile to Floor)
189 17 5/89 15 5/89 7/169 DP1SO1018F 119. 131. 139. 142.
249 23 5/89 15 5/89 7/169 DP1SO1024F 128. 140. 143. 152.
309 29 5/89 15 5/89 7/169 DP1SO1030F 131. 142. 151. 156.
369 35 5/89 15 5/89 7/169 DP1SO1036F 139. 151. 162. 185.
429 41 5/89 15 5/89 7/169 DP1SO1042F 142. 156. 180. 189.
489 47 5/89 15 5/89 7/169 DP1SO1048F 151. 172. 189. 194.
609 59 5/89 15 5/89 7/169 DP1SO1060F 156. 173. 182. 187.
249 High Fabric Beltway Lower Insert,(For Beltway Panels only)
189 17 5/89 25 1/29 7/169 DP1SO2418 143. 163. 179. 194.
249 23 5/89 25 1/29 7/169 DP1SO2424 177. 202. 220. 233.
309 29 5/89 25 1/29 7/169 DP1SO2430 191. 220. 239. 260.
369 35 5/89 25 1/29 7/169 DP1SO2436 210. 239. 271. 282.
429 41 5/89 25 1/29 7/169 DP1SO2442 218. 243. 273. 289.
489 47 5/89 25 1/29 7/169 DP1SO2448 229. 260. 279. 306.
609 59 5/89 25 1/29 7/169 DP1SO2460 261. 278. 295. 314.
Beltway Cover and Insert Supports 189 7/169 DP8BC18K 157. n/a n/a n/a
249 7/169 DP8BC24K 179. n/a n/a n/a
309 7/169 DP8BC30K 200. n/a n/a n/a
369 7/169 DP8BC36K 218. n/a n/a n/a
429 7/169 DP8BC42K 243. n/a n/a n/a
489 7/169 DP8BC48K 273. n/a n/a n/a
609 7/169 DP8BC60K 315. n/a n/a n/a
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Beltway Cover/Insert Supports
1. Pattern Number2. Beltway Cover/Trim Finish
Beltway Inserts
1. Pattern Number2. Fabric
Order Code
Beltway Inserts
Example: DP1 SO2442, W257-6
DP1SO2442
Pattern Number
W257-6 Solid Crepe Blue Pinefabric
Beltway Cover/Insert Supports
Example: DP2 BC42K, 117
DP2BC42K
Pattern Number
117 Soft Grey Beltway CoverTrim
Included with:
Beltway Inserts
Beltway Cover/Insert Supports
• Individual beltway cover• Insert supports (top and bottom
rail)• Attachment hardware• Beltway knockout covers
Note: 249H inserts are to only beused below beltways.
Options
Beltway Panel Inserts
Beltway Cover/Insert SupportsBeltway cover has a smooth finish
Tile to Floor Option:To specify tile to floor, add an ‘‘F’’suffix to the pattern number and add$11 to the list price.
Note: Tile to floor option availablefor 249 high inserts.
Dividends Horizon
55
Pan
els,
Bui
ld-T
o-S
pec
Beltway InsertsLower Fabric InsertsBeltway Cover and Insert Supports
description w* w h d pattern no.grade
10 20 30 40
Beltway Knockout Replacement Cover forElectrical and Data
Pkg of 10 DE2KC10 $111. n/a n/a n/a
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Beltway Cover/Insert Supports
1. Pattern Number2. Beltway Cover/Trim Finish
Beltway Inserts
1. Pattern Number2. Fabric
Order Code
Beltway Inserts
Example: DP1 SO2442, W257-6
DP1SO2442
Pattern Number
W257-6 Solid Crepe Blue Pinefabric
Beltway Cover/Insert Supports
Example: DP2 BC42K, 117
DP2BC42K
Pattern Number
117 Soft Grey Beltway CoverTrim
Included with:
Beltway Inserts
Beltway Cover/Insert Supports
• Individual beltway cover• Insert supports (top and bottom
rail)• Attachment hardware• Beltway knockout covers
Note: 249H inserts are to only beused below beltways.
Options
Beltway Panel Inserts
Beltway Cover/Insert SupportsBeltway cover has a smooth finish
Tile to Floor Option:To specify tile to floor, add an ‘‘F’’suffix to the pattern number and add$11 to the list price.
Note: Tile to floor option availablefor 249 high inserts.
Dividends Horizon
56
Beltway InsertsLower Steel Inserts
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P32 pack
P12 pack
P22 pack
P3
249 High Solid Steel Insert 189 17 5/89 25 1/29 7/169 DP3SS( )2418 $167. $201. $213. $289. $338. $369.
249 23 5/89 25 1/29 7/169 DP3SS( )2424 207. 237. 259. 362. 414. 449.
309 29 5/89 25 1/29 7/169 DP3SS( )2430 218. 254. 278. 383. 449. 486.
369 35 5/89 25 1/29 7/169 DP3SS( )2436 246. 279. 311. 428. 486. 543.
429 41 5/89 25 1/29 7/169 DP3SS( )2442 253. 281. 312. 447. 494. 549.
489 47 5/89 25 1/29 7/169 DP3SS( )2448 262. 298. 328. 459. 527. 575.
249 High Perforated Steel Insert 189 17 5/89 25 1/29 7/169 DP3PSB( )2418 250. 297. 326. 435. 509. 553.
249 23 5/89 25 1/29 7/169 DP3PSB( )2424 309. 354. 385. 543. 619. 678.
309 29 5/89 25 1/29 7/169 DP3PSB( )2430 333. 383. 416. 579. 678. 732.
369 35 5/89 25 1/29 7/169 DP3PSB( )2436 371. 419. 466. 641. 732. 810.
429 41 5/89 25 1/29 7/169 DP3PSB( )2442 382. 422. 469. 670. 744. 822.
489 47 5/89 25 1/29 7/169 DP3PSB( )2448 389. 448. 487. 696. 793. 864.
249 High Embossed Steel Insert 189 17 5/89 25 1/29 7/169 DP3ESB( )2418 250. 297. 326. 435. 509. 553.
249 23 5/89 25 1/29 7/169 DP3ESB( )2424 309. 354. 385. 543. 619. 678.
309 29 5/89 25 1/29 7/169 DP3ESB( )2430 333. 383. 416. 579. 678. 732.
369 35 5/89 25 1/29 7/169 DP3ESB( )2436 371. 419. 466. 641. 732. 810.
429 41 5/89 25 1/29 7/169 DP3ESB( )2442 382. 422. 469. 670. 744. 822.
489 47 5/89 25 1/29 7/169 DP3ESB( )2448 389. 448. 487. 696. 793. 864.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Steel Insert
1. Pattern number2. Paint finish
Order Code
Steel Insert
Example: DP3SS( )2418 115
DP3SS22418
Pattern number
115 Medium Grey paint
Included with:
Steel Insert
Note: 249H inserts are to only beused below beltways.
Options
Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:To specify tile to floor, add an ’F’suffix to the pattern number and add$17 for a single pack or $33 for adouble pack.
Note: Tile to Floor option availablefor 249 high inserts.
Dividends Horizon
57
Pan
els,
Bui
ld-T
o-S
pec
Beltway InsertsLower Laminate Inserts
description w* w d pattern no. list
249 High Laminate Beltway Lower InsertBase Raceway or Open Base
159 14 5/89 7/169 DP3L12415 $216.
189 17 5/89 7/169 DP3L12418 230.
249 23 5/89 7/169 DP3L12424 259.
309 29 5/89 7/169 DP3L12430 306.
369 35 5/89 7/169 DP3L12436 376.
429 41 5/89 7/169 DP3L12442 383.
489 47 5/89 7/169 DP3L12448 388.
249 High Laminate Beltway Lower InsertTile to Floor
159 14 5/89 7/169 DP3L12415F 216.
189 17 5/89 7/169 DP3L12418F 230.
249 23 5/89 7/169 DP3L12424F 259.
309 29 5/89 7/169 DP3L12430F 306.
369 35 5/89 7/169 DP3L12436F 376.
429 41 5/89 7/169 DP3L12442F 383.
489 47 5/89 7/169 DP3L12448F 388.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Beltway Laminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Beltway Laminate Inserts
Example: DP3L12436
DP3L12436
Pattern Number
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Beltway Laminate Inserts
• Attachment clips
Note: 249H inserts are to only beused below beltways.
Dividends Horizon
58
High Acoustic Core InsertsSound Transmission Septum Inserts
description type pattern no.High Acoustic
Core InsertSound Transmission
Septum Insert
509 High For 189 panel width DP1( ) 5018 $183. $69.
For 249 panel width DP1( ) 5024 198. 69.
For 309 panel width DP1( ) 5030 212. 69.
For 369 panel width DP1( ) 5036 229. 107.
For 429 panel width DP1( ) 5042 249. 107.
For 489 panel width DP1( ) 5048 287. 107.
649 High For 189 panel width DP1( ) 6418 212. 69.
For 249 panel width DP1( ) 6424 229. 69.
For 309 panel width DP1( ) 6430 241. 69.
For 369 panel width DP1( ) 6436 281. 107.
For 429 panel width DP1( ) 6442 322. 107.
For 489 panel width DP1( ) 6448 354. 107.
789 High For 189 panel width DP1( ) 7818 244. 114.
For 249 panel width DP1( ) 7824 279. 114.
For 309 panel width DP1( ) 7830 312. 114.
For 369 panel width DP1( ) 7836 338. 130.
For 429 panel width DP1( ) 7842 361. 130.
For 489 panel width DP1( ) 7848 437. 130.
Ordering Information
Inserts
1. Pattern Number
Order Code
Inserts
Example: DP1(AC) 6448
DP1(AC)6448
Pattern Number
Included with:
Inserts
• High Acoustic Core Insert• Sound Transmission Septum
Insert
Options
InsertsInsert the appropriate letters forinsert required within theparentheses of the pattern number.(AC) = High Acoustic(ST) = Sound Transmission
Dividends Horizon
59
Pan
els,
Bui
ld-T
o-S
pec
Window Insert KitsSingle Pane Windows
description h w pattern no. P1 P2 P3
Window, top position with topway 149 249 D2P1( )T1424 $653. $693. $724.
149 309 D2P1( )T1430 761. 795. 837.
149 36 D2P1( )T1436 799. 839. 881.
149 429 D2P1( )T1442 949. 996. 1,045.
149 489 D2P1( )T1448 969. 1,019. 1,071.
219 249 D2P1( )T2124 713. 747. 782.
219 309 D2P1( )T2130 839. 882. 924.
219 369 D2P1( )T2136 903. 949. 991.
219 429 D2P1( )T2142 1,077. 1,132. 1,184.
219 489 D2P1( )T2148 1,199. 1,263. 1,321.
289 249 D2P1( )T2824 782. 823. 866.
289 309 D2P1( )T2830 924. 969. 1,018.
289 369 D2P1( )T2836 991. 1,045. 1,091.
289 429 D2P1( )T2842 1,184. 1,246. 1,307.
289 489 D2P1( )T2848 1,321. 1,388. 1,453.
Window, top position full view 149 249 D2P1( )VT1424 609. 646. 674.
149 309 D2P1( )VT1430 711. 741. 779.
149 369 D2P1( )VT1436 799. 839. 881.
149 429 D2P1( )VT1442 949. 996. 1,045.
149 489 D2P1( )VT1448 969. 1,019. 1,071.
219 249 D2P1( )VT2124 713. 747. 782.
219 309 D2P1( )VT2130 839. 882. 924.
219 369 D2P1( )VT2136 903. 949. 991.
219 429 D2P1( )VT2142 1,077. 1,132. 1,184.
219 489 D2P1( )VT2148 1,199. 1,263. 1,321.
289 249 D2P1( )VT2824 782. 823. 866.
289 309 D2P1( )VT2830 924. 969. 1,018.
289 369 D2P1( )VT2836 991. 1,045. 1,091.
289 429 D2P1( )VT2842 1,184. 1,246. 1,307.
289 489 D2P1( )VT2848 1,321. 1,388. 1,453.
Window, middle position 149 249 D2P1( )VL1424 609. 646. 674.
149 309 D2P1( )VL1430 711. 741. 779.
149 369 D2P1( )VL1436 799. 839. 881.
149 429 D2P1( )VL1442 949. 996. 1,045.
149 489 D2P1( )VL1448 969. 1,019. 1,071.
Ordering Information
Single Pane Window Kit
1. Pattern number2. Paint finish
Order Code
Single Pane Window Kit
Example: D2P1GT1448, 117
D2P1GT1448
Single Pane Window w/Clear Glass
117 Soft Grey Paint
Included with:
Single Pane Window Kit
Note: The single pane windowinsert kit is not compatible with theD2 style stack frame. Use D1 stylestack frames with single panewindow insert kits.
Note: Use top position windowinsert kits when using with D1 stylestack frames.
Options
Single Pane Window Kit
Note: Single Pane Window Kitmust be used with D2 StyleSupports
Glass Options:(G) = Clear Tempered Glass(F) = Powder Glass
Dividends Horizon
60
Markerboard Tiles79, 109, 149 and 219 High
description h w pattern no. 1 pack 6 pack
D3 79 Markerboard tile 79 189 DP3MB( )718 $117. $518.
79 249 DP3MB( )724 122. 549.
79 309 DP3MB( )730 131. 607.
79 369 DP3MB( )736 162. 710.
79 429 DP3MB( )742 173. 756.
79 489 DP3MB( )748 180. 801.
D3 109 Markerboard tile 109 189 DP3MB( )1018 162. 721.
109 249 DP3MB( )1024 173. 768.
109 309 DP3MB( )1030 174. 801.
109 369 DP3MB( )1036 196. 849.
109 429 DP3MB( )1042 202. 901.
109 489 DP3MB( )1048 213. 958.
D3 149 Markerboard tile 149 189 DP3MB( )1418 162. 721.
149 249 DP3MB( )1424 173. 768.
149 309 DP3MB( )1430 174. 801.
149 369 DP3MB( )1436 196. 849.
149 429 DP3MB( )1442 202. 901.
149 489 DP3MB( )1448 213. 958.
D3 219 Markerboard tile 219 189 DP3MB( )2118 207. 1,076.
219 249 DP3MB( )2124 260. 1,348.
219 309 DP3MB( )2130 277. 1,448.
219 369 DP3MB( )2136 312. 1,605.
219 429 DP3MB( )2142 318. 1,665.
219 489 DP3MB( )2148 329. 1,734.
Ordering Information
Markerboard Tiles
1. Pattern Number
Order Code
Markerboard Tiles
Example: DP3MB(1) 1436
DP3MB(1)1436
Pattern Number
Included with:
Markerboard Tiles
Options
Markerboard Tiles(1) = 1 Pack(6) = 6 Pack
Dividends Horizon
61
Pan
els,
Bui
ld-T
o-S
pec
Markerboard Tiles249 and 289 High and Markerboard Tray
description height width pattern number 1 pack 2 pack P1 P2 P3
D3 249 Markerboard tile 249 189 DP3MB( )2418 $207. $359.
249 249 DP3MB( )2424 260. 447.
249 309 DP3MB( )2430 277. 481.
249 369 DP3MB( )2436 312. 536.
249 429 DP3MB( )2442 318. 554.
249 489 DP3MB( )2448 329. 576.
D3 289 Markerboard tile 289 189 DP3MB( )2818 227. 392.
289 249 DP3MB( )2824 262. 454.
289 309 DP3MB( )2830 278. 488.
289 369 DP3MB( )2836 312. 547.
289 429 DP3MB( )2842 318. 562.
289 489 DP3MB( )2848 329. 581.
Markerboard Tray 249 DP1MBT24 180. 190. 198.
309 DP1MBT30 185. 193. 202.
369 DP1MBT36 188. 198. 205.
429 DP1MBT42 191. 201. 208.
489 DP1MBT48 196. 204. 213.
Ordering Information
Markerboard Tiles
1. Pattern Number
Markerboard Tray
1. Pattern Number2. Paint Finish
Order Code
Markerboard Tiles
Example: DP3MB(1) 1436
DP3MB(1)1436
Pattern Number
Included with:
Markerboard Tiles
Options
Markerboard Tiles(1) = 1 Pack(2) = 2 Pack
Dividends Horizon
62
Steel Insert Kits79, 89, 109, 149 and 219 High Solid Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P36 pack
P16 pack
P26 pack
P3
D3 79 High Solid Steel Insert 159 14 5/89 7 3/169 7/169 DP3SS( )715 $92. $111. $129. $417. $482. $575.
189 17 5/89 7 3/169 7/169 DP3SS( )718 92. 111. 129. 417. 482. 575.
249 23 5/89 7 3/169 7/169 DP3SS( )724 99. 122. 131. 443. 548. 596.
309 29 5/89 7 3/169 7/169 DP3SS( )730 113. 133. 150. 495. 609. 662.
369 35 5/89 7 3/169 7/169 DP3SS( )736 130. 156. 165. 575. 662. 714.
429 41 5/89 7 3/169 7/169 DP3SS( )742 139. 163. 174. 609. 704. 763.
489 47 5/89 7 3/169 7/169 DP3SS( )748 146. 167. 176. 648. 744. 805.
D3 89 High Solid Steel Insert 189 17 5/89 8 3/169 7/169 DP3SS( )0818 102. 118. 134. 420. 488. 579.
249 23 5/89 8 3/169 7/169 DP3SS( )0824 106. 129. 141. 447. 551. 597.
309 29 5/89 8 3/169 7/169 DP3SS( )0830 121. 142. 156. 504. 613. 669.
369 35 5/89 8 3/169 7/169 DP3SS( )0836 135. 162. 171. 581. 667. 719.
429 41 5/89 8 3/169 7/169 DP3SS( )0842 144. 168. 177. 613. 706. 766.
489 47 5/89 8 3/169 7/169 DP3SS( )0848 151. 172. 184. 651. 747. 820.
D3 109 High Solid Steel Insert 159 14 5/89 10 3/169 7/169 DP3SS( )1015 130. 151. 160. 584. 662. 692.
189 17 5/89 10 3/169 7/169 DP3SS( )1018 130. 151. 160. 584. 662. 692.
249 23 5/89 10 3/169 7/169 DP3SS( )1024 139. 162. 165. 626. 714. 744.
309 29 5/89 10 3/169 7/169 DP3SS( )1030 141. 165. 171. 648. 754. 780.
369 35 5/89 10 3/169 7/169 DP3SS( )1036 160. 176. 191. 692. 793. 831.
429 41 5/89 10 3/169 7/169 DP3SS( )1042 164. 185. 207. 726. 831. 911.
489 47 5/89 10 3/169 7/169 DP3SS( )1048 171. 208. 213. 780. 935. 975.
Order information
Freestanding Foot
1. Pattern number2. Finish
Order Code
Freestanding Foot
Example: DFFEUS( )
DFFEUS Pattern number
115 Medium Grey paint
Included with:
Solid Steel Insert Solid Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Dividends Horizon
63
Pan
els,
Bui
ld-T
o-S
pec
Steel Insert Kits79, 89, 109, 149 and 219 High Solid Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P36 pack
P16 pack
P26 pack
P3
D3 149 High Solid Steel Insert 159 14 5/89 14 3/169 7/169 DP3SS( )1415 $130. $151. $160. $584. $662. $692.
189 17 5/89 14 3/169 7/169 DP3SS( )1418 130. 151. 160. 584. 662. 692.
249 23 5/89 14 3/169 7/169 DP3SS( )1424 139. 162. 165. 626. 714. 744.
309 29 5/89 14 3/169 7/169 DP3SS( )1430 141. 165. 171. 648. 754. 780.
369 35 5/89 14 3/169 7/169 DP3SS( )1436 160. 176. 191. 692. 793. 831.
429 41 5/89 14 3/169 7/169 DP3SS( )1442 164. 185. 207. 726. 831. 911.
489 47 5/89 14 3/169 7/169 DP3SS( )1448 171. 208. 213. 780. 935. 975.
D3 219 High Solid Steel Insert 15 14 5/89 21 3/169 7/169 DP3SS( )2115 168. 202. 215. 872. 1,029. 1,119.
189 17 5/89 21 3/169 7/169 DP3SS( )2118 168. 202. 215. 872. 1,029. 1,119.
249 23 5/89 21 3/169 7/169 DP3SS( )2124 209. 238. 261. 1,090. 1,244. 1,364.
309 29 5/89 21 3/169 7/169 DP3SS( )2130 222. 260. 281. 1,169. 1,364. 1,469.
369 35 5/89 21 3/169 7/169 DP3SS( )2136 248. 283. 315. 1,300. 1,469. 1,639.
429 41 5/89 21 3/169 7/169 DP3SS( )2142 257. 284. 316. 1,352. 1,496. 1,664.
489 47 5/89 21 3/169 7/169 DP3SS( )2148 263. 301. 330. 1,403. 1,597. 1,741.
Order information
Freestanding Foot
1. Pattern number2. Finish
Order Code
Freestanding Foot
Example: DFFEUS( )
DFFEUS Pattern number
115 Medium Grey paint
Included with:
Solid Steel Insert Solid Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Dividends Horizon
64
Steel Insert KitsWorksurface Height and 289 High Solid Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P32 pack
P12 pack
P22 pack
P3
D3 Worksurface HeightSolid Steel Insert
159 14 5/89 22 1/29 7/169 DP3SS( )WH15 $168. $202. $215. $293. $343. $374.
189 17 5/89 22 1/29 7/169 DP3SS( )WH18 168. 202. 215. 293. 343. 374.
249 23 5/89 22 1/29 7/169 DP3SS( )WH24 209. 238. 261. 364. 417. 451.
309 29 5/89 22 1/29 7/169 DP3SS( )WH30 222. 260. 281. 386. 451. 493.
369 35 5/89 22 1/29 7/169 DP3SS( )WH36 248. 283. 315. 433. 493. 548.
429 41 5/899 22 1/29 7/169 DP3SS( )WH42 257. 284. 316. 449. 502. 553.
489 47 5/89 22 1/29 7/169 DP3SS( )WH48 263. 301. 330. 464. 532. 582.
D3 289 High Solid Steel Insert 159 14 5/89 299 7/169 DP3SS( )2815 183. 183. 213. 316. 345. 374.
189 17 5/89 299 7/169 DP3SS( )2818 183. 183. 213. 316. 345. 374.
249 23 5/89 299 7/169 DP3SS( )2824 211. 211. 261. 366. 420. 457.
309 29 5/89 299 7/169 DP3SS( )2830 228. 260. 283. 397. 457. 502.
369 35 5/89 299 7/169 DP3SS( )2836 248. 283. 315. 439. 502. 553.
429 41 5/89 299 7/169 DP3SS( )2842 257. 287. 315. 451. 505. 561.
489 47 5/89 299 7/169 DP3SS( )2848 263. 301. 331. 472. 535. 584.
Ordering Information
Solid Steel Insert
1. Pattern number2. Paint finish
Order Code
Solid Steel Insert
Example: DP3SS( )2118 115
DP3SS22118
Pattern number
115 Medium Grey paint
Included with:
Solid Steel Insert
Options
Solid Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Dividends Horizon
65
Pan
els,
Bui
ld-T
o-S
pec
Steel Insert Kits79, 109, 149 and 219 High Perforated Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P36 pack
P16 pack
P26 pack
P3
D3 79 High Perforated Steel Insert 159 14 5/89 7 3/169 7/169 DP3PSB( )715 $141. $164. $198. $626. $726. $856.
189 17 5/89 7 3/169 7/169 DP3PSB( )718 141. 164. 198. 626. 726. 856.
249 23 5/89 7 3/169 7/169 DP3PSB( )724 151. 185. 204. 662. 820. 894.
309 29 5/89 7 3/169 7/169 DP3PSB( )730 167. 208. 218. 744. 924. 1,001.
369 35 5/89 7 3/169 7/169 DP3PSB( )736 202. 233. 246. 856. 1,001. 1,077.
429 41 5/89 7 3/169 7/169 DP3PSB( )742 212. 241. 263. 924. 1,053. 1,155.
489 47 5/89 7 3/169 7/169 DP3PSB( )748 217. 249. 272. 975. 1,119. 1,205.
D3 89 High Perforated Steel Insert 189 17 5/89 8 3/169 7/169 DP3PSB( )0818 145. 169. 204. 631. 734. 856.
249 23 5/89 8 3/169 7/169 DP3PSB( )0824 157. 190. 208. 667. 822. 900.
309 29 5/89 8 3/169 7/169 DP3PSB( )0830 172. 213. 227. 747. 926. 900.
369 35 5/89 8 3/169 7/169 DP3PSB( )0836 207. 238. 252. 859. 1,003. 1,079.
429 41 5/89 8 3/169 7/169 DP3PSB( )0842 217. 246. 272. 926. 1,055. 1,156.
489 47 5/89 8 3/169 7/169 DP3PSB( )0848 224. 256. 276. 978. 1,120. 1,206.
D3 109 High Perforated Steel Insert 159 14 5/89 10 3/169 7/169 DP3PSB( )1015 202. 228. 235. 883. 1,001. 1,040.
189 17 5/89 10 3/169 7/169 DP3PSB( )1018 202. 228. 235. 883. 1,001. 1,040.
249 23 5/89 10 3/169 7/169 DP3PSB( )1024 212. 238. 246. 935. 1,077. 1,119.
309 29 5/89 10 3/169 7/169 DP3PSB( )1030 213. 246. 260. 975. 1,131. 1,169.
369 35 5/89 10 3/169 7/169 DP3PSB( )1036 235. 272. 284. 1,040. 1,194. 1,244.
429 41 5/89 10 3/169 7/169 DP3PSB( )1042 245. 281. 304. 1,090. 1,244. 1,364.
489 47 5/89 10 3/169 7/169 DP3PSB( )1048 260. 308. 328. 1,169. 1,403. 1,469.
Ordering Information
Perforated Steel Insert
1. Pattern number2. Paint finish
Order Code
Perforated Steel Insert
Example: DP3PBS21430 117
DP3PSB21430
Pattern number
117 Soft Grey paint
Included with:
Perforated Steel Insert
Options
Perforated Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Tile to Floor Option not available onDP2 perforated steel tile insert.
Dividends Horizon
66
Steel Insert Kits79, 109, 149 and 219 High Perforated Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P36 pack
P16 pack
P26 pack
P3
D3 149 High Perforated Steel Insert 159 14 5/89 14 3/169 7/169 DP3PSB( )1415 $202. $228. $235. $883. $1,001. $1,040.
189 17 5/89 14 3/169 7/169 DP3PSB( )1418 202. 228. 235. 883. 1,001. 1,040.
249 23 5/89 14 3/169 7/169 DP3PSB( )1424 212. 238. 246. 935. 1,077. 1,119.
309 29 5/89 14 3/169 7/169 DP3PSB( )1430 213. 246. 260. 975. 1,131. 1,169.
369 35 5/89 14 3/169 7/169 DP3PSB( )1436 235. 272. 284. 1,040. 1,194. 1,244.
429 41 5/89 14 3/169 7/169 DP3PSB( )1442 245. 281. 304. 1,090. 1,244. 1,364.
489 47 5/89 14 3/169 7/169 DP3PSB( )1448 260. 308. 328. 1,169. 1,403. 1,469.
D3 219 High Perforated Steel Insert 159 14 5/89 21 3/169 7/169 DP3PSB( )2115 251. 300. 329. 1,313. 1,544. 1,680.
189 17 5/89 21 3/169 7/169 DP3PSB( )2118 251. 300. 329. 1,313. 1,544. 1,680.
249 23 5/89 21 3/169 7/169 DP3PSB( )2124 312. 360. 392. 1,639. 1,871. 2,053.
309 29 5/89 21 3/169 7/169 DP3PSB( )2130 334. 386. 420. 1,751. 2,053. 2,212.
369 35 5/89 21 3/169 7/169 DP3PSB( )2136 375. 425. 472. 1,946. 2,212. 2,457.
429 41 5/89 21 3/169 7/169 DP3PSB( )2142 385. 429. 473. 2,030. 2,245. 2,495.
489 47 5/89 21 3/169 7/169 DP3PSB( )2148 395. 450. 494. 2,108. 2,405. 2,615.
Ordering Information
Perforated Steel Insert
1. Pattern number2. Paint finish
Order Code
Perforated Steel Insert
Example: DP3PBS21430 117
DP3PSB21430
Pattern number
117 Soft Grey paint
Included with:
Perforated Steel Insert
Options
Perforated Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Tile to Floor Option not available onDP2 perforated steel tile insert.
Dividends Horizon
67
Pan
els,
Bui
ld-T
o-S
pec
Steel Insert Kits149, Worksurface Height and 289 High Perforated Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P32 pack
P12 pack
P22 pack
P3
D3 Worksurface Height Perforated Steel Insert 159 14 5/89 22 1/29 7/169 DP3PSB( )WH15 $251. $300. $329. $439. $513. $561.
189 17 5/89 22 1/29 7/169 DP3PSB( )WH18 251. 300. 329. 439. 513. 561.
249 23 5/89 22 1/29 7/169 DP3PSB( )WH24 312. 360. 392. 548. 626. 686.
309 29 5/89 22 1/29 7/169 DP3PSB( )WH30 334. 386. 420. 584. 686. 740.
369 35 5/89 22 1/29 7/169 DP3PSB( )WH36 375. 425. 472. 648. 740. 820.
429 41 5/89 22 1/29 7/169 DP3PSB( )WH42 385. 429. 473. 677. 750. 831.
489 47 5/89 22 1/29 7/169 DP3PSB( )WH48 395. 450. 494. 704. 802. 872.
D3 289 High Perforated Steel Insert 159 14 5/89 299 7/169 DP3PSB( )2815 275. 275. 328. 474. 521. 561.
189 17 5/89 299 7/169 DP3PSB( )2818 275. 275. 328. 474. 521. 561.
249 24 5/89 299 7/169 DP3PSB( )2824 316. 316. 392. 553. 633. 692.
309 29 5/89 299 7/169 DP3PSB( )2830 336. 386. 425. 596. 692. 750.
369 35 5/89 299 7/169 DP3PSB( )2836 375. 425. 472. 658. 750. 831.
429 41 5/89 299 7/169 DP3PSB( )2842 385. 430. 472. 686. 754. 840.
489 47 5/89 299 7/169 DP3PSB( )2848 395. 450. 495. 711. 805. 879.
Ordering Information
Perforated Steel Insert
1. Pattern number2. Paint finish
Order Code
Perforated Steel Insert
Example: DP3PBS21430 117
DP3PSB21430
Pattern number
117 Soft Grey paint
Included with:
Perforated Steel Insert
Options
Perforated Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Tile to Floor Option not available onDP2 perforated steel tile insert.
Dividends Horizon
68
Steel Insert Kits79, 109, 149 and 219 High Embossed Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P36 pack
P16 pack
P26 pack
P3
D3 79 High Embossed Steel Insert 159 14 5/89 7 3/169 7/169 DP3ESB( )715 $141. $164. $198. $626. $726. $856.
189 17 5/89 7 3/169 7/169 DP3ESB( )718 141. 164. 198. 626. 726. 856.
249 23 5/89 7 3/169 7/169 DP3ESB( )724 151. 185. 204. 662. 820. 894.
309 30 5/89 7 3/169 7/169 DP3ESB( )730 167. 208. 218. 744. 924. 1,001.
369 35 5/89 7 3/169 7/169 DP3ESB( )736 202. 233. 246. 856. 1,001. 1,077.
429 41 5/89 7 3/169 7/169 DP3ESB( )742 212. 241. 263. 924. 1,053. 1,155.
489 47 5/89 7 3/169 7/169 DP3ESB( )748 217. 249. 272. 975. 1,119. 1,205.
D3 89 High Embossed Steel Insert 189 17 5/89 8 3/169 7/169 DP3ESB( )0818 145. 169. 204. 631. 730. 859.
249 23 5/89 8 3/169 7/169 DP3ESB( )0824 157. 190. 208. 667. 822. 894.
309 29 5/89 8 3/169 7/169 DP3ESB( )0830 173. 213. 227. 747. 926. 1,003.
369 35 5/89 8 3/169 7/169 DP3ESB( )0836 207. 238. 251. 859. 1,003. 1,062.
429 41 5/89 8 3/169 7/169 DP3ESB( )0842 217. 246. 271. 844. 1,062. 1,156.
489 47 5/89 8 3/169 7/169 DP3ESB( )0848 224. 256. 276. 978. 1,120. 1,206.
D3 109 High Embossed Steel Insert 159 14 5/89 10 3/169 7/169 DP3ESB( )1015 202. 228. 235. 883. 1,001. 1,040.
189 17 5/89 10 3/169 7/169 DP3ESB( )1018 202. 228. 235. 883. 1,001. 1,040.
249 23 5/89 10 3/169 7/169 DP3ESB( )1024 212. 238. 246. 935. 1,077. 1,119.
309 29 5/89 10 3/169 7/169 DP3ESB( )1030 213. 246. 260. 975. 1,131. 1,169.
369 35 5/89 10 3/169 7/169 DP3ESB( )1036 235. 272. 284. 1,040. 1,194. 1,244.
429 41 5/89 10 3/169 7/169 DP3ESB( )1042 245. 281. 304. 1,090. 1,244. 1,364.
489 47 5/89 10 3/169 7/169 DP3ESB( )1048 260. 308. 328. 1,169. 1,403. 1,469.
Ordering Information
Embossed Steel Insert
1. Pattern number2. Paint finish
Order Code
Embossed Steel Insert
Example: DP3ESB21430 117
DP3ESB21430
Pattern number
117 Soft Grey paint
Included with:
Embossed Steel Insert
Options
Embossed Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Dividends Horizon
69
Pan
els,
Bui
ld-T
o-S
pec
Steel Insert Kits79, 109, 149 and 219 High Embossed Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P36 pack
P16 pack
P26 pack
P3
D3 149 High Embossed Steel Insert 159 14 5/89 14 3/169 7/169 DP3ESB( )1415 $202. $228. $235. $883. $1,001. $1,040.
189 17 5/89 14 3/169 7/169 DP3ESB( )1418 202. 228. 235. 883. 1,001. 1,040.
249 23 5/89 14 3/169 7/169 DP3ESB( )1424 212. 238. 246. 935. 1,077. 1,119.
309 29 5/89 14 3/169 7/169 DP3ESB( )1430 213. 246. 260. 975. 1,131. 1,169.
369 35 5/89 14 3/169 7/169 DP3ESB( )1436 235. 272. 284. 1,040. 1,194. 1,244.
429 41 5/89 14 3/169 7/169 DP3ESB( )1442 245. 281. 304. 1,090. 1,244. 1,364.
489 47 5/89 14 3/169 7/169 DP3ESB( )1448 260. 308. 328. 1,169. 1,403. 1,469.
D3 219 Embossed Steel Insert 159 14 5/89 219 7/169 DP3ESB( )2115 251. 300. 329. 1,313. 1,544. 1,680.
189 17 5/89 219 7/169 DP3ESB( )2118 251. 300. 329. 1,313. 1,544. 1,680.
249 23 5/89 219 7/169 DP3ESB( )2124 312. 360. 392. 1,639. 1,871. 2,053.
309 29 5/89 219 7/169 DP3ESB( )2130 334. 386. 420. 1,751. 2,053. 2,212.
369 35 5/89 219 7/169 DP3ESB( )2136 375. 425. 472. 1,946. 2,212. 2,457.
429 41 5/89 219 7/169 DP3ESB( )2142 385. 429. 473. 2,030. 2,245. 2,495.
489 47 5/89 219 7/169 DP3ESB( )2148 395. 450. 494. 2,108. 2,405. 2,615.
Ordering Information
Embossed Steel Insert
1. Pattern number2. Paint finish
Order Code
Embossed Steel Insert
Example: DP3ESB21430 117
DP3ESB21430
Pattern number
117 Soft Grey paint
Included with:
Embossed Steel Insert
Options
Embossed Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Dividends Horizon
70
Steel Insert KitsWorksurface Height and 289 High Embossed Steel Insert
description w* w h d pattern no.1 pack
P11 pack
P21 pack
P32 pack
P12 pack
P22 pack
P3
D3 Worksurface Height Embossed Steel Insert 159 14 5/89 22 1/29 7/169 DP3ESB( )WH15 $251. $300. $329. $439. $513. $561.
189 17 5/89 22 1/29 7/169 DP3ESB( )WH18 251. 300. 329. 439. 513. 561.
249 23 5/89 22 1/29 7/169 DP3ESB( )WH24 312. 360. 392. 548. 626. 686.
309 39 5/89 22 1/29 7/169 DP3ESB( )WH30 334. 386. 420. 584. 686. 740.
369 35 5/89 22 1/29 7/169 DP3ESB( )WH36 375. 425. 472. 648. 740. 820.
429 41 5/89 22 1/29 7/169 DP3ESB( )WH42 385. 429. 473. 677. 750. 831.
489 47 5/89 22 1/29 7/169 DP3ESB( )WH48 395. 450. 494. 704. 802. 872.
D3 289 High Embossed Steel Insert 159 14 5/89 299 7/169 DP3ESB( )2815 275. 275. 328. 474. 521. 561.
189 17 5/89 299 7/169 DP3ESB( )2818 275. 275. 328. 474. 521. 561.
249 23 5/89 299 7/169 DP3ESB( )2824 316. 316. 392. 553. 633. 692.
309 29 5/89 299 7/169 DP3ESB( )2830 336. 386. 425. 596. 692. 750.
369 35 5/89 299 7/169 DP3ESB( )2836 375. 425. 472. 658. 750. 831.
429 41 5/89 299 7/169 DP3ESB( )2842 385. 430. 472. 686. 754. 840.
489 47 5/89 299 7/169 DP3ESB( )2848 395. 450. 495. 711. 805. 879.
Ordering Information
Embossed Steel Insert
1. Pattern number2. Paint finish
Order Code
Embossed Steel Insert
Example: DP3ESB22130 117
DP3ESB22130
Pattern number
117 Soft Grey paint
Included with:
Embossed Steel Insert
Options
Embossed Steel Insert
Insert pack quantity intoparenthesis in pattern number
Tile to Floor Option:Tile to Floor available in heights of149, Worksurface Height, 249 and289. To specify tile to floor, add an’F’ suffix to the pattern number andadd $17 for a single pack, $33 for adouble pack and $99 for a 6 pack tothe list price.
Dividends Horizon
71
Pan
els,
Bui
ld-T
o-S
pec
Slatwall Tiles79, 149, 219 and 289 High
description w h d pattern no. P1 P2 P3
79 High Slatwall Tile 249 79 7/169 DP1SW0724( ) $334. $364. $381.
309 79 7/169 DP1SW0730( ) 354. 394. 407.
369 79 7/169 DP1SW0736( ) 381. 420. 436.
429 79 7/169 DP1SW0742( ) 403. 440. 463.
489 79 7/169 DP1SW0748( ) 428. 469. 486.
149 High Slatwall Tile 249 149 7/169 DP1SW1424( ) 446. 492. 541.
309 149 7/169 DP1SW1430( ) 526. 579. 629.
369 149 7/169 DP1SW1436( ) 604. 663. 723.
429 149 7/169 DP1SW1442( ) 658. 723. 787.
489 149 7/169 DP1SW1448( ) 714. 784. 859.
219 High Slatwall Tile 249 219 7/169 DP1SW2124( ) 592. 651. 712.
309 219 7/169 DP1SW2130( ) 713. 781. 850.
369 219 7/169 DP1SW2136( ) 831. 914. 996.
429 219 7/169 DP1SW2142( ) 916. 1,010. 1,100.
489 219 7/169 DP1SW2148( ) 1,001. 1,102. 1,203.
289 Top Position Slatwall Tile 249 289 7/169 DP1SW2824( ) 735. 810. 883.
309 289 7/169 DP1SW2830( ) 894. 985. 1,074.
369 289 7/169 DP1SW2836( ) 1,057. 1,158. 1,264.
429 289 7/169 DP1SW2842( ) 1,170. 1,286. 1,401.
489 289 7/169 DP1SW2848( ) 1,285. 1,412. 1,540.
Ordering Information
Post Assemblies
1. Pattern Number2. Paint Finish
Order Code
Post Assemblies
Example: DP1 S2824T, 111
DP1 S2824T
Pattern Number
111 Jet Black Paint
Included with:
Note: Middle position slatwall tilesare able to be used on topway or fullview panels.
Options
Panel Options:(T) = for topway panel top position(F) = for full view panel top position(M) = for middle position
Dividends Horizon
72
Freestanding FootFreestanding Foot
description type pattern no. list
End Universal 2 per pack DFFEUD $448.
single pack DFFEUS 228.
Center Universal single pack DFFCUS 239.
Center Single Sided Single pack DFFSSS 263.
End SingleSided
Right hand shown
left, single pack DFFELS 222.
right, single pack DFFERS 222.
Order information
Freestanding Foot
1. Pattern number2. Finish
Order Code
Freestanding Foot
Example: DFFEUS( )
DFFEUS Pattern number
115 Medium Grey paint
Included with:
Freestanding Foot
Dividends Horizon
73
Pan
els,
Bui
ld-T
o-S
pec
Rolling Door579, 649 and 789 High
description type w d h pattern no. Temp
GL13GL25GL35
MetalP1
MetalP2
MetalP3 Plastic
Rolling Door
right hand shown
579 High with lock 369 39 579 DPRD15736(L/R)L $3,715. $3,830.
429 39 579 DPRD15742(L/R)L 4,036. 4,148.
489 39 579 DPRD15748(L/R)L 4,444. 4,563.
579 High no lock 369 39 579 DPRD15736(L/R)N 3,600. 3,710.
429 39 579 DPRD15742(L/R)N 3,919. 4,030.
489 39 579 DPRD15748(L/R)N 4,310. 4,434.
649 High with lock 369 39 649 DPRD16436(L/R)L 3,865. 4,007.
429 39 649 DPRD16442(L/R)L 4,188. 4,325.
489 39 649 DPRD16448(L/R)L 4,607. 4,755.
649 High no lock 369 39 649 DPRD16436(L/R)N 3,751. 3,891.
429 39 649 DPRD16442(L/R)N 4,071. 4,208.
489 39 649 DPRD16448(L/R)N 4,477. 4,630.
789 High with lock 369 39 789 DPRD17836(L/R)L 4,497. 4,686.
429 39 789 DPRD17842(L/R)L 4,816. 5,003.
489 39 789 DPRD17848(L/R)L 5,299. 5,503.
789 High no lock 369 39 789 DPRD17836(L/R)N 4,379. 4,567.
429 39 789 DPRD17842(L/R)N 4,699. 4,888.
489 39 789 DPRD17848(L/R)N 5,169. 5,377.
Panel Top Caps for Jamb Side 189 DP( )PT18RD 94. 97. 99. 0.
249 DP( )PT24RD 94. 97. 99. 0.
309 DP( )PT30RD 94. 97. 99. 0.
369 DP( )PT36RD 94. 97. 99. 0.
429 DP( )PT42RD 94. 97. 99. 0.
489 DP( )PT48RD 94. 97. 99. 0.
549 DP( )PT54RD 99. 103. 106. 0.
609 DP( )PT60RD 105. 107. 109. 0.
669 DP( )PT66RD 109. 113. 118. 0.
729 DP( )PT72RD 117. 121. 129. 0.
789 DP( )PT78RD 125. 133. 139. 0.
Ordering Information
Rolling Door
1. Pattern Number2. Glass type
Top Cap
1. Pattern Number2. Paint finish
Application Notes:Stacking screen header bracket isfor use on 789h doors (connectionside) when connecting door headerto top of 149h stacking screenpositioned on top of a 649h panel.
Order Code
Rolling Door
Example: DPRD1 5736 RL
DPRD1 Rolling Door
57 Height
36 Width
R Right
L Lock
118T Bright White Textured
GL13 Frosted Glass
Included With:
Rolling Door
57( and 64( High
• Rolling Door• Mounting Brackets• Door jamb• Threshold
78( High
• Rolling Door• Header• Mounting Brackets• Door jamb• Panel end trim• Threshold
Top Cap
• Top Cap• End Plug
Options
Rolling Door
Mounting Options:L = Left HandR = Right Hand
Paint Finish:All Core paint finishes
Glass Type:Temp = Clear GlassGL13 = Frosted GlassGL25 = Bronze GlassGL35 = Grey Glass
Top CapTop Cap Options:( 4) = Radius Metal(5) = Flat Metal
Dividends Horizon
74
Rolling Door579, 649 and 789 High
description type w d h pattern no. Temp
GL13GL25GL35
MetalP1
MetalP2
MetalP3 Plastic
Panel Top Caps for Jamb Side 849 DP( )PT84RD $135. $144. $149. $0.
909 DP( )PT90RD 147. 153. 156. 0.
969 DP( )PT96RD 154. 161. 166. 0.
Door Jamb Kit to mount to DP8 Post DPRD1JPM 0. 0. 0. 35.
Stacking screen header bracket DPRD1SSB 0. 0. 0. 33.
Ordering Information
Rolling Door
1. Pattern Number2. Glass type
Top Cap
1. Pattern Number2. Paint finish
Application Notes:Stacking screen header bracket isfor use on 789h doors (connectionside) when connecting door headerto top of 149h stacking screenpositioned on top of a 649h panel.
Order Code
Rolling Door
Example: DPRD1 5736 RL
DPRD1 Rolling Door
57 Height
36 Width
R Right
L Lock
118T Bright White Textured
GL13 Frosted Glass
Included With:
Rolling Door
57( and 64( High
• Rolling Door• Mounting Brackets• Door jamb• Threshold
78( High
• Rolling Door• Header• Mounting Brackets• Door jamb• Panel end trim• Threshold
Top Cap
• Top Cap• End Plug
Options
Rolling Door
Mounting Options:L = Left HandR = Right Hand
Paint Finish:All Core paint finishes
Glass Type:Temp = Clear GlassGL13 = Frosted GlassGL25 = Bronze GlassGL35 = Grey Glass
Top CapTop Cap Options:( 4) = Radius Metal(5) = Flat Metal
Dividends Horizon
75
Pan
els,
Bui
ld-T
o-S
pec
Glass ScreensOpen Weave Screens649 High and Freestanding Open Weave Screen Kits
description type h w d pattern no. P1 P2 P3
Freestanding Screen Kit
(single screen kit shown)
For use with 2 open weave screens DP7SWTFKD $659. $723. $754.
For use with 249 wide open weave screen DP7SWTFK24 614. 675. 702.
For use with 309 wide open weave screen DP7SWTFK30 624. 684. 710.
For use with 369 wide open weave screen DP7SWTFK36 638. 702. 727.
For use with 429 wide open weave screen DP7SWTFK42 659. 723. 754.
For use with 489 wide open weave screen DP7SWTFK48 659. 723. 754.
Ordering Information
Open Weave Screen:
1. Pattern number2. Frame finish3. Top cap style4. Top cap finish5. Base finish6. Fabric finish
Freestanding Open Weave ScreenKits
1. Pattern number2. Paint finish
Order Code
Open Weave Screen:
Example: DP7SWTFF3636117/4/117/117/W1113-1
DP7SWT Triangular open weavescreen
FF Screen to Floor
117 Frame finish
4 Radius metal top cap
117 Top cap finish
117 Raceway finish
W1113-1 Warp Net White
Included with:
Open Weave Screen
Note: Freestanding open weavescreen kits are finished withtextured paint, including 613 Silver.
Note: Freestanding open weavescreen kits only work with openweave screens with frame-to-floor(FF) base option.
Options:
Open Weave Screen
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Type:(FF) = Frame to the Floor both sides(RR) = Raceway covers noknockouts(LL) = Open base
Note: Raceway covers are notavailable with knockouts.
Dividends Horizon
76
Glass ScreensTriangular Frame Screen with Glass429 and 509 High
description h w t pattern no. P1 P2 P3
429 High Triangular Frame Screen withGlass
429 249 39 DP7S( )T( )4224 $1,513. $1,542. $1,570.
429 309 39 DP7S( )T( )4230 1,596. 1,629. 1,656.
429 369 39 DP7S( )T( )4236 1,687. 1,717. 1,749.
429 429 39 DP7S( )T( )4242 1,718. 1,752. 1,786.
429 489 39 DP7S( )T( )4248 1,752. 1,786. 1,818.
509 High Triangular Frame Screen withGlass
509 249 39 DP7S( )T( )5024 1,621. 1,650. 1,686.
509 309 39 DP7S( )T( )5030 1,659. 1,694. 1,724.
509 369 39 DP7S( )T( )5036 1,702. 1,734. 1,766.
509 429 39 DP7S( )T( )5042 1,839. 1,872. 1,906.
509 489 39 DP7S( )T( )5048 1,968. 2,009. 2,049.
*Note: Frame with raceway covers shown
Ordering Information
Triangular Frame Screen withGlass:
1. Pattern number2. Frame finish3. Glass type4. Top cap style5. Top cap finish6. Raceway finish
Order Code
Triangular Frame with Glass:
Example: DP7SGTRR4236117/4/117/117
DP7SGT Triangular frame withclear glass
RR Raceway type
117 Frame finish
4 Radius metal top cap
117 Top cap finish
117 Raceway finish
Included with:
Triangular Frame with Glass
• Topcap (when specified)• Connecting hardware
Note: Screens are only available inKnoll core finishes.
Options
GlassOptions:(G)= Clear Tempered Glass(F) = Powder Glass
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Type:(FF) = Frame to the Floor both sides(RR) = Raceway covers noknockouts(LL) = Open base
Note: Raceway covers are notavailable with knockouts.
Dividends Horizon
77
Pan
els,
Bui
ld-T
o-S
pec
Glass ScreensTriangular Frame Screen with Glass579 and 649 High
description h w t pattern no. P1 P2 P3
579 High Triangular Frame Screen withGlass
579 249 39 DP7S( )T( )5724 $1,659. $1,694. $1,724.
579 309 39 DP7S( )T( )5730 1,749. 1,782. 1,815.
579 369 39 DP7S( )T( )5736 1,840. 1,876. 1,909.
579 429 39 DP7S( )T( )5742 1,909. 1,948. 1,984.
579 489 39 DP7S( )T( )5748 1,977. 2,020. 2,058.
649 High Triangular Frame Screen withGlass
649 249 39 DP7S( )T( )6424 1,701. 1,731. 1,764.
649 309 39 DP7S( )T( )6430 1,839. 1,872. 1,906.
649 369 39 DP7S( )T( )6436 1,970. 2,014. 2,054.
649 429 39 DP7S( )T( )6442 1,980. 2,021. 2,060.
649 489 39 DP7S( )T( )6448 1,989. 2,025. 2,066.
*Note: Frame to the floor shown
Ordering Information
Triangular Frame Screen withGlass:
1. Pattern number2. Frame finish3. Glass type4. Top cap style5. Top cap finish6. Raceway finish
Order Code
Triangular Frame with Glass:
Example: DP7SGTRR5736117/4/117/117
DP7SGT Triangular frame withclear glass
RR Raceway type
117 Frame finish
4 Radius metal top cap
117 Top cap finish
117 Raceway finish
Included with:
Triangular Frame with Glass
• Topcap (when specified)• Connecting hardware
Note: Screens are only available inKnoll core finishes.
Options
Glass Options:(G) = Clear Tempered Glass(F) = Powder Glass
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Type:(FF) = Frame to the Floor both sides(RR) = Raceway covers noknockouts(LL) = Open base
Note: Raceway covers are notavailable with knockouts.
Dividends Horizon
78
Glass ScreensRectangular Frame Screen with Glass429 and 509 High
description h w t pattern no. P1 P2 P3
429 High Rectangular Frame Screen withGlass
429 249 39 DP7S( )R( )4224 $1,519. $1,548. $1,581.
429 309 39 DP7S( )R( )4230 1,607. 1,639. 1,670.
429 369 39 DP7S( )R( )4236 1,700. 1,730. 1,763.
429 429 39 DP7S( )R( )4242 1,731. 1,764. 1,796.
429 489 39 DP7S( )R( )4248 1,766. 1,801. 1,838.
509 High Rectangular Frame Screen withGlass
509 249 39 DP7S( )R( )5024 1,634. 1,663. 1,700.
509 309 39 DP7S( )R( )5030 1,674. 1,708. 1,742.
509 369 39 DP7S( )R( )5036 1,716. 1,749. 1,782.
509 429 39 DP7S( )R( )5042 1,854. 1,892. 1,922.
509 489 39 DP7S( )R( )5048 1,991. 2,028. 2,068.
Ordering Information
Rectangular Frame Screen withGlass:
1. Pattern number2. Frame finish3. Glass type4. Top cap style5. Top cap finish6. Raceway finish
Order Code
Rectangular Frame with Glass:
Example: DP7SGRRR4236117/4/117/117
DP7SGR Rectangular framescreen with clear glass
RR Raceway type
117 Frame finish
4 Radius metal top cap
117 Top cap finish
117 Raceway finish
Included with:
Rectangular Frame Glass
• Topcap (when specified)• Connecting hardware
Note: Screens are only available inKnoll core finishes.
Options
Glass Options:(G)= Clear Tempered Glass(F) = Powder Glass
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Type:(RR) = Raceway covers noknockouts(LL) = Open base
Frame to floor option not availableon Rectangular glass screens.
Note: Raceway covers are notavailable with knockouts.
Dividends Horizon
79
Pan
els,
Bui
ld-T
o-S
pec
Glass ScreensRectangular Frame Screen with Glass579 and 649 High
description h w t pattern no. P1 P2 P3
579 High Rectangular Frame Screen withGlass
579 249 39 DP7S( )R( )5724 $1,671. $1,705. $1,738.
579 309 39 DP7S( )R( )5730 1,764. 1,800. 1,837.
579 369 39 DP7S( )R( )5736 1,856. 1,895. 1,923.
579 429 39 DP7S( )R( )5742 1,923. 1,962. 2,004.
579 489 39 DP7S( )R( )5748 2,001. 2,034. 2,075.
649 High Rectangular Frame Screen withGlass
649 249 39 DP7S( )R( )6424 1,709. 1,745. 1,774.
649 309 39 DP7S( )R( )6430 1,851. 1,891. 1,921.
649 369 39 DP7S( )R( )6436 1,992. 2,030. 2,069.
649 429 39 DP7S( )R( )6442 2,001. 2,034. 2,075.
649 489 39 DP7S( )R( )6448 2,005. 2,044. 2,081.
Ordering Information
Rectangular Frame Screen withGlass:
1. Pattern number2. Frame finish3. Glass type4. Top cap style5. Top cap finish6. Raceway finish
Order Code
Rectangular Frame with Glass:
Example: DP7SGRRR5736117/4/117/117
DP7SGR Rectangular framescreen with clear glass
RR Raceway type
117 Frame finish
4 Radius metal top cap
117 Top cap finish
117 Raceway finish
Included with:
Rectangular Frame Glass
• Topcap (when specified)• Connecting hardware
Note: Screens are only available inKnoll core finishes.
Options
Glass Options:(G)= Clear Tempered Glass(F) = Powder Glass
Top Cap Options:No Top Cap - Deduct $40;Radius and Flat Metal P1 asstandard; P2 $2, P3 $4
Raceway Type:(RR) = Raceway covers noknockouts(LL) = Open base
Frame to floor option not availableon Rectangular glass screens.
Note: Raceway covers are notavailable with knockouts.
Dividends Horizon
80
Glass Stacking ScreensTriangular Frame Stacking Screen with Glass
description h w t pattern no. P1 P2 P3
149 High Triangular Frame StackingScreen with Glass
149 249 39 DP7SS( )T1424 $892. $910. $927.
149 309 39 DP7SS( )T1430 937. 954. 971.
149 369 39 DP7SS( )T1436 980. 1,003. 1,024.
149 429 39 DP7SS( )T1442 1,027. 1,046. 1,069.
149 489 39 DP7SS( )T1448 1,071. 1,090. 1,114.
149 549 39 DP7SS( )T1454 1,123. 1,161. 1,195.
149 609 39 DP7SS( )T1460 1,181. 1,217. 1,251.
149 669 39 DP7SS( )T1466 1,245. 1,278. 1,321.
149 729 39 DP7SS( )T1472 1,304. 1,342. 1,383.
149 789 39 DP7SS( )T1478 1,370. 1,409. 1,452.
149 849 39 DP7SS( )T1484 1,439. 1,482. 1,524.
149 909 39 DP7SS( )T1490 1,513. 1,558. 1,602.
149 969 39 DP7SS( )T1496 1,586. 1,635. 1,683.
219 High Triangular Frame StackingScreen with Glass
219 249 39 DP7SS( )T2124 898. 914. 935.
219 309 39 DP7SS( )T2130 948. 966. 988.
219 369 39 DP7SS( )T2136 996. 1,016. 1,037.
219 429 39 DP7SS( )T2142 1,046. 1,068. 1,088.
219 489 39 DP7SS( )T2148 1,097. 1,121. 1,143.
219 549 39 DP7SS( )T2154 1,152. 1,184. 1,217.
219 609 39 DP7SS( )T2160 1,207. 1,242. 1,279.
219 669 39 DP7SS( )T2166 1,268. 1,305. 1,344.
219 729 39 DP7SS( )T2172 1,331. 1,368. 1,411.
219 789 39 DP7SS( )T2178 1,396. 1,440. 1,481.
219 849 39 DP7SS( )T2184 1,465. 1,514. 1,555.
219 909 39 DP7SS( )T2190 1,541. 1,586. 1,634.
219 969 39 DP7SS( )T2196 1,619. 1,668. 1,713.
289 High Triangular Frame StackingScreen with Glass
289 249 39 DP7SS( )T2824 963. 983. 1,003.
289 309 39 DP7SS( )T2830 1,021. 1,043. 1,059.
289 369 39 DP7SS( )T2836 1,079. 1,098. 1,123.
289 429 39 DP7SS( )T2842 1,141. 1,163. 1,185.
289 489 39 DP7SS( )T2848 1,198. 1,222. 1,244.
289 549 39 DP7SS( )T2854 1,258. 1,296. 1,332.
289 609 39 DP7SS( )T2860 1,320. 1,357. 1,399.
289 669 39 DP7SS( )T2866 1,386. 1,427. 1,467.
289 729 39 DP7SS( )T2872 1,456. 1,497. 1,542.
289 789 39 DP7SS( )T2878 1,526. 1,573. 1,620.
289 849 39 DP7SS( )T2884 1,603. 1,648. 1,702.
289 909 39 DP7SS( )T2890 1,685. 1,736. 1,785.
289 969 39 DP7SS( )T2896 1,769. 1,821. 1,877.
Ordering Information
Triangular Frame Stacking Screen
1. Pattern number2. Frame finish3. Glass
Order Code
Triangular Frame Stacking Screen
Example: DP7SSGT1424 / 117
DP7SSGT Stack, Triangular Frame,w/ clear tempered glass
117 Frame finish
Included with:
Triangular Frame Stacking Screen
• Attachment hardware
Note: Screens are only available inKnoll core finishes.
Note: Reveal strips for stackingscreens 609 or wider must bespecified separately.
Options
NOTE: Stacking screens arecompatible with DP8 Full Viewpanels only.
Glass Options:(G)= Clear Tempered Glass(F) = Powder Glass
Dividends Horizon
81
Pan
els,
Bui
ld-T
o-S
pec
Glass Stacking ScreensGlass Stacking Screen Reveal Filler Strips
description h w t pattern no. P1 P2 P3
Stacking Screen Reveal Filler 29 249 29 DP8PRFN24 n/c n/c n/c
29 309 29 DP8PRFN30 n/c n/c n/c
29 369 29 DP8PRFN36 n/c n/c n/c
29 429 29 DP8PRFN42 n/c n/c n/c
29 489 29 DP8PRFN48 n/c n/c n/c
29 609 29 DP8PRFN60 n/c n/c n/c
Ordering Information
Triangular Frame Stacking Screen
1. Pattern number2. Frame finish3. Glass
Order Code
Triangular Frame Stacking Screen
Example: DP7SSGT1424 / 117
DP7SSGT Stack, Triangular Frame,w/ clear tempered glass
117 Frame finish
Included with:
Triangular Frame Stacking Screen
• Attachment hardware
Note: Screens are only available inKnoll core finishes.
Note: Reveal strips for stackingscreens 609 or wider must bespecified separately.
Options
NOTE: Stacking screens arecompatible with DP8 Full Viewpanels only.
Glass Options:(G)= Clear Tempered Glass(F) = Powder Glass
Dividends Horizon
82
Glass Stacking ScreensRectangular Frame Stacking Screen with Glass
description h* w t pattern no. P1 P2 P3
149 High Rectangular Frame StackingScreen with Glass
149 249 39 DP7SS( )R1424 $820. $833. $849.
149 309 39 DP7SS( )R1430 861. 880. 894.
149 369 39 DP7SS( )R1436 905. 919. 942.
149 429 39 DP7SS( )R1442 947. 965. 985.
149 489 39 DP7SS( )R1448 990. 1,009. 1,030.
149 549 39 DP7SS( )R1454 1,041. 1,070. 1,102.
149 609 39 DP7SS( )R1460 1,092. 1,121. 1,156.
149 669 39 DP7SS( )R1466 1,145. 1,180. 1,212.
149 729 39 DP7SS( )R1472 1,202. 1,238. 1,275.
149 789 39 DP7SS( )R1478 1,264. 1,302. 1,341.
149 849 39 DP7SS( )R1484 1,326. 1,365. 1,407.
149 909 39 DP7SS( )R1490 1,393. 1,436. 1,476.
149 969 39 DP7SS( )R1496 1,462. 1,507. 1,550.
219 High Rectangular Frame StackingScreen with Glass
219 249 39 DP7SS( )R2124 992. 1,013. 1,032.
219 309 39 DP7SS( )R2130 1,051. 1,073. 1,090.
219 369 39 DP7SS( )R2136 1,107. 1,130. 1,153.
219 429 39 DP7SS( )R2142 1,166. 1,187. 1,211.
219 489 39 DP7SS( )R2148 1,219. 1,244. 1,273.
219 549 39 DP7SS( )R2154 1,279. 1,320. 1,357.
219 609 39 DP7SS( )R2160 1,344. 1,386. 1,427.
219 669 39 DP7SS( )R2166 1,411. 1,455. 1,498.
219 729 39 DP7SS( )R2172 1,481. 1,525. 1,571.
219 789 39 DP7SS( )R2178 1,558. 1,604. 1,647.
219 849 39 DP7SS( )R2184 1,635. 1,685. 1,734.
219 909 39 DP7SS( )R2190 1,716. 1,769. 1,818.
219 969 39 DP7SS( )R2196 1,802. 1,857. 1,907.
289 High Rectangular Frame StackingScreen with Glass
289 249 39 DP7SS( )R2824 954. 970. 992.
289 309 39 DP7SS( )R2830 1,012. 1,033. 1,049.
289 369 39 DP7SS( )R2836 1,070. 1,089. 1,115.
289 429 39 DP7SS( )R2842 1,133. 1,154. 1,179.
289 489 39 DP7SS( )R2848 1,194. 1,214. 1,235.
289 549 39 DP7SS( )R2854 1,250. 1,288. 1,326.
289 609 39 DP7SS( )R2860 1,311. 1,353. 1,390.
289 669 39 DP7SS( )R2866 1,378. 1,420. 1,461.
289 729 39 DP7SS( )R2872 1,449. 1,489. 1,533.
289 789 39 DP7SS( )R2878 1,519. 1,565. 1,609.
289 849 39 DP7SS( )R2884 1,596. 1,642. 1,691.
289 909 39 DP7SS( )R2890 1,679. 1,726. 1,778.
289 969 39 DP7SS( )R2896 1,756. 1,811. 1,863.
Ordering Information
Rectangular Frame StackingScreen:
1. Pattern number2. Frame finish3. Glass
Order Code
Rectangular Frame StackingScreen:
Example: DP7SSGR1424 /117
DP7SSGR Stack, RectangularFrame, w/clear temperedglass
117 Raceway finish
Included with:
Rectangular Frame StackingScreen:
• Attachment hardware
Note: Screens are only available inKnoll core finishes.
Note: Reveal strips for stackingscreens 609 or wider must bespecified separately.
Options
NOTE: Stacking screens arecompatible with DP8 Full Viewpanels only.
Glass Options:(G)= Clear Tempered Glass(F) = Powder Glass
Dividends Horizon
83
Pan
els,
Bui
ld-T
o-S
pec
Standard Frameless Add Up1/29 Clear, Frosted, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)
Frosted(GL13)
Bronze (GL25)Grey (GL35)
Frameless Add Up, 79 High 159 1/29 79 DP1AU0715( )G $333. $354.
189 1/29 79 DP1AU0718( )G 367. 398.
249 1/29 79 DP1AU0724( )G 405. 446.
309 1/29 79 DP1AU0730( )G 441. 488.
369 1/29 79 DP1AU0736( )G 499. 554.
429 1/29 79 DP1AU0742( )G 554. 625.
489 1/29 79 DP1AU0748( )G 615. 689.
549 1/29 79 DP1AU0754( )G 667. 755.
609 1/29 79 DP1AU0760( )G 722. 815.
669 1/29 79 DP1AU0766( )G 774. 878.
729 1/29 79 DP1AU0772( )G 828. 943.
789 1/29 79 DP1AU0778( )G 897. 1,018.
849 1/29 79 DP1AU0784( )G 963. 1,100.
909 1/29 79 DP1AU0790( )G 1,043. 1,190.
969 1/29 79 DP1AU0796( )G 1,125. 1,285.
Shortened Frameless Add Up, 79 High 149 1/29 79 DP1AU0714( )G 333. 354.
179 1/29 79 DP1AU0717( )G 367. 398.
239 1/29 79 DP1AU0723( )G 405. 446.
299 1/29 79 DP1AU0729( )G 441. 488.
359 1/29 79 DP1AU0735( )G 499. 554.
419 1/29 79 DP1AU0741( )G 554. 625.
479 1/29 79 DP1AU0747( )G 615. 689.
539 1/29 79 DP1AU0753( )G 667. 755.
599 1/29 79 DP1AU0759( )G 722. 815.
659 1/29 79 DP1AU0765( )G 774. 878.
719 1/29 79 DP1AU0771( )G 828. 943.
779 1/29 79 DP1AU0777( )G 897. 1,018.
839 1/29 79 DP1AU0783( )G 963. 1,100.
899 1/29 79 DP1AU0789( )G 1,043. 1,190.
959 1/29 79 DP1AU0795( )G 1,125. 1,285.
Ordering Information
Frameless Add Up with ClearGlass
1. Pattern number2. Frame finish3. Glass finish
End Cap
1. Pattern number2. Frame finish
Order Code
Standard Frameless Add Upwith Clear Glass
Example: DP1AU0736VG
DP1AU Standard FramelessAdd Up
07 79 High
36 369 Wide
V Full view
G Glass
117 Frame finish
TEMP Clear glass finish
Included with:
Standard Frameless Add Up withClear Glass
• Attachment hardware• Topway Trough Spacer (Topway
only)• Alignment Clip
Options
Frame Options:(V) = Full view(C) = Topway
Glass Options:(TEMP) = Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
84
Standard Frameless Add Up1/29 Clear, Frosted, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)
Frosted(GL13)
Bronze (GL25)Grey (GL35)
Frameless Add Up, 149 High 159 1/29 149 DP1AU1415( )G $409. $455.
189 1/29 149 DP1AU1418( )G 475. 538.
249 1/29 149 DP1AU1424( )G 539. 615.
309 1/29 149 DP1AU1430( )G 598. 695.
369 1/29 149 DP1AU1436( )G 688. 802.
429 1/29 149 DP1AU1442( )G 774. 906.
489 1/29 149 DP1AU1448( )G 864. 1,015.
549 1/29 149 DP1AU1454( )G 949. 1,118.
609 1/29 149 DP1AU1460( )G 1,032. 1,222.
669 1/29 149 DP1AU1466( )G 1,119. 1,324.
729 1/29 149 DP1AU1472( )G 1,205. 1,430.
789 1/29 149 DP1AU1478( )G 1,299. 1,543.
849 1/29 149 DP1AU1484( )G 1,406. 1,668.
909 1/29 149 DP1AU1490( )G 1,518. 1,802.
969 1/29 149 DP1AU1496( )G 1,641. 1,944.
Shortened Frameless Add Up, 149 High 149 1/29 149 DP1AU1414( )G 409. 455.
179 1/29 149 DP1AU1417( )G 475. 538.
239 1/29 149 DP1AU1423( )G 539. 615.
299 1/29 149 DP1AU1429( )G 598. 695.
359 1/29 149 DP1AU1435( )G 688. 802.
419 1/29 149 DP1AU1441( )G 774. 906.
479 1/29 149 DP1AU1447( )G 864. 1,015.
539 1/29 149 DP1AU1453( )G 949. 1,118.
599 1/29 149 DP1AU1459( )G 1,032. 1,222.
659 1/29 149 DP1AU1465( )G 1,119. 1,324.
719 1/29 149 DP1AU1471( )G 1,205. 1,430.
779 1/29 149 DP1AU1477( )G 1,299. 1,543.
839 1/29 149 DP1AU1483( )G 1,406. 1,668.
899 1/29 149 DP1AU1489( )G 1,518. 1,802.
959 1/29 149 DP1AU1495( )G 1,641. 1,944.
End Cap DP1AUECTP 59.
Ordering Information
Frameless Add Up with ClearGlass
1. Pattern number2. Frame finish3. Glass finish
End Cap
1. Pattern number2. Frame finish
Order Code
Standard Frameless Add Upwith Clear Glass
Example: DP1AU1436VG
DP1AU Standard FramelessAdd Up
14 149 High
36 369 Wide
V Full view
G Glass
117 Frame finish
TEMP Clear glass finish
Included with:
Standard Frameless Add Up withClear Glass
• Attachment hardware• Topway Trough Spacer (Topway
only)• Alignment Clip
Options
Frame Options:(V) = Full view(C) = Topway
Glass Options:(TEMP) = Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
85
Pan
els,
Bui
ld-T
o-S
pec
Recessed Frameless Add Up1/29 Clear, Powder, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)Frosted(GL13)
Bronze (GL25)Grey (GL35)
Recessed Frameless Add Up,79 High
159 1/29 79 DP1AR0715H( ) $317. $408. $504.
189 1/29 79 DP1AR0718H( ) 343. 420. 521.
249 1/29 79 DP1AR0724H( ) 372. 448. 545.
309 1/29 79 DP1AR0730H( ) 400. 473. 569.
369 1/29 79 DP1AR0736H( ) 444. 520. 631.
429 1/29 79 DP1AR0742H( ) 494. 585. 722.
489 1/29 79 DP1AR0748H( ) 545. 658. 802.
549 1/29 79 DP1AR0754H( ) 631. 781. 942.
609 1/29 79 DP1AR0760H( ) 681. 846. 1,030.
669 1/29 79 DP1AR0766H( ) 734. 904. 1,106.
729 1/29 79 DP1AR0772H( ) 780. 965. 1,191.
789 1/29 79 DP1AR0778H( ) 832. 1,004. 1,269.
849 1/29 79 DP1AR0784H( ) 880. 1,082. 1,350.
909 1/29 79 DP1AR0790H( ) 937. 1,134. 1,407.
969 1/29 79 DP1AR0796H( ) 994. 1,205. 1,489.
Recessed Shortened FramelessAdd Up, 79 High
149 1/29 79 DP1AR0714H( ) 329. 408. 504.
179 1/29 79 DP1AR0717H( ) 338. 420. 521.
239 1/29 79 DP1AR0723H( ) 371. 448. 545.
299 1/29 79 DP1AR0729H( ) 397. 473. 569.
359 1/29 79 DP1AR0735H( ) 441. 520. 631.
419 1/29 79 DP1AR0741H( ) 491. 585. 722.
479 1/29 79 DP1AR0747H( ) 543. 650. 793.
539 1/29 79 DP1AR0753H( ) 631. 752. 911.
599 1/29 79 DP1AR0759H( ) 678. 815. 998.
659 1/29 79 DP1AR0765H( ) 725. 873. 1,075.
719 1/29 79 DP1AR0771H( ) 772. 922. 1,147.
779 1/29 79 DP1AR0777H( ) 820. 942. 1,238.
839 1/29 79 DP1AR0783H( ) 872. 1,054. 1,332.
899 1/29 79 DP1AR0789H( ) 933. 1,113. 1,385.
959 1/29 79 DP1AR0795H( ) 982. 1,183. 1,489.
Ordering Information
Frameless Add Up with ClearGlass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Upwith Clear Glass
Example: DP1AR0736HTEMP117
DP1AR Recessed FramelessAdd Up
07 79 High
36 369 Wide
H 1/29 Thick
TEMP Clear glass finish
117 Frame finish
Included with:
Recessed Frameless Add Up withClear Glass
• Attachment hardware• Alignment Clip
Options
Frame Options:
Glass Options:(TEMP) = Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
86
Recessed Frameless Add Up1/29 Clear, Powder, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)Frosted(GL13)
Bronze (GL25)Grey (GL35)
Recessed Frameless Add Up,149 High
159 1/29 149 DP1AR1415H( ) $355. $397. $521.
189 1/29 149 DP1AR1418H( ) 413. 468. 539.
249 1/29 149 DP1AR1424H( ) 469. 535. 657.
309 1/29 149 DP1AR1430H( ) 520. 605. 781.
369 1/29 149 DP1AR1436H( ) 597. 696. 911.
429 1/29 149 DP1AR1442H( ) 671. 788. 1,042.
489 1/29 149 DP1AR1448H( ) 752. 870. 1,136.
549 1/29 149 DP1AR1454H( ) 825. 963. 1,302.
609 1/29 149 DP1AR1460H( ) 898. 1,046. 1,412.
669 1/29 149 DP1AR1466H( ) 972. 1,134. 1,560.
729 1/29 149 DP1AR1472H( ) 1,048. 1,238. 1,705.
789 1/29 149 DP1AR1478H( ) 1,131. 1,313. 1,799.
849 1/29 149 DP1AR1484H( ) 1,222. 1,420. 1,924.
909 1/29 149 DP1AR1490H( ) 1,318. 1,573. 2,116.
969 1/29 149 DP1AR1496H( ) 1,427. 1,696. 2,223.
Recessed Shortened FramelessAdd Up, 149 High
149 1/29 149 DP1AR1414H( ) 354. 397. 521.
179 1/29 149 DP1AR1417H( ) 413. 468. 539.
239 1/29 149 DP1AR1423H( ) 468. 535. 657.
299 1/29 149 DP1AR1429H( ) 521. 605. 781.
359 1/29 149 DP1AR1435H( ) 597. 696. 911.
419 1/29 149 DP1AR1441H( ) 672. 788. 1,042.
479 1/29 149 DP1AR1447H( ) 752. 870. 1,147.
539 1/29 149 DP1AR1453H( ) 825. 963. 1,320.
599 1/29 149 DP1AR1459H( ) 898. 1,046. 1,418.
659 1/29 149 DP1AR1465H( ) 972. 1,128. 1,560.
719 1/29 149 DP1AR1471H( ) 1,048. 1,238. 1,705.
779 1/29 149 DP1AR1477H( ) 1,131. 1,320. 1,806.
839 1/29 149 DP1AR1483H( ) 1,222. 1,420. 1,954.
899 1/29 149 DP1AR1489H( ) 1,318. 1,550. 2,094.
959 1/29 149 DP1AR1495H( ) 1,427. 1,696. 2,233.
Ordering Information
Frameless Add Up with ClearGlass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Upwith Clear Glass
Example: DP1AR1436HTEMP117
DP1AR Recessed FramelessAdd Up
14 149 High
36 369 Wide
H 1/29 Thick
TEMP Clear glass finish
117 Frame finish
Included with:
Recessed Frameless Add Up withClear Glass
• Attachment hardware• Alignment Clip
Options
Frame Options:
Glass Options:(TEMP) = Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
87
Pan
els,
Bui
ld-T
o-S
pec
Recessed Frameless Add Up3/89 Clear and Laminate Frosted
description w d h pattern no.Clear
(TEMP)
laminatePowder(GL60)
Recessed Frameless Add Up,79 high
159 3/89 79 DP1AR0715W( ) $286. $367.
189 3/89 79 DP1AR0718W( ) 309. 378.
249 3/89 79 DP1AR0724W( ) 336. 403.
309 3/89 79 DP1AR0730W( ) 360. 426.
369 3/89 79 DP1AR0736W( ) 400. 468.
429 3/89 79 DP1AR0742W( ) 446. 527.
489 3/89 79 DP1AR0748W( ) 490. 585.
549 3/89 79 DP1AR0754W( ) 569. 677.
609 3/89 79 DP1AR0760W( ) 613. 733.
669 3/89 79 DP1AR0766W( ) 660. 785.
729 3/89 79 DP1AR0772W( ) 702. 845.
789 3/89 79 DP1AR0778W( ) 750. 880.
849 3/89 79 DP1AR0784W( ) 792. 948.
909 3/89 79 DP1AR0790W( ) 844. 1,020.
969 3/89 79 DP1AR0796W( ) 894. 1,064.
Recessed Shortened FramelessAdd Up, 79 high
149 3/89 79 DP1AR0714W( ) 295. 367.
179 3/89 79 DP1AR0717W( ) 304. 378.
239 3/89 79 DP1AR0723W( ) 334. 403.
299 3/89 79 DP1AR0729W( ) 358. 426.
359 3/89 79 DP1AR0735W( ) 398. 468.
419 3/89 79 DP1AR0741W( ) 442. 527.
479 3/89 79 DP1AR0747W( ) 488. 595.
539 3/89 79 DP1AR0753W( ) 569. 686.
599 3/89 79 DP1AR0759W( ) 611. 750.
659 3/89 79 DP1AR0765W( ) 653. 788.
719 3/89 79 DP1AR0771W( ) 695. 845.
779 3/89 79 DP1AR0777W( ) 737. 880.
839 3/89 79 DP1AR0783W( ) 784. 958.
899 3/89 79 DP1AR0789W( ) 839. 1,020.
959 3/89 79 DP1AR0795W( ) 883. 1,064.
Ordering Information
Frameless Add Up with ClearGlass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Upwith Clear Glass
Example: DP1AR0736WTEMP117
DP1AR Recessed FramelessAdd Up
07 79 High
36 369 Wide
W 3/89 Thick
TEMP Clear glass finish
117 Frame finish
Included with:
Recessed Frameless Add Up withClear Glass
• Attachment hardware• Alignment clip
Options
Frame Options:
Glass Options:(TEMP) = Clear(GL60) = Laminated Powder
Dividends Horizon
88
Recessed Frameless Add Up3/89 Clear and Laminate Frosted
description w d h pattern no.Clear
(TEMP)
laminatePowder(GL60)
Recessed Frameless Add Up,149 high
159 3/89 149 DP1AR1415W( ) $319. $392.
189 3/89 149 DP1AR1418W( ) 371. 421.
249 3/89 149 DP1AR1424W( ) 421. 482.
309 3/89 149 DP1AR1430W( ) 468. 545.
369 3/89 149 DP1AR1436W( ) 539. 627.
429 3/89 149 DP1AR1442W( ) 604. 710.
489 3/89 149 DP1AR1448W( ) 677. 794.
549 3/89 149 DP1AR1454W( ) 743. 875.
609 3/89 149 DP1AR1460W( ) 807. 956.
669 3/89 149 DP1AR1466W( ) 877. 1,033.
729 3/89 149 DP1AR1472W( ) 944. 1,119.
789 3/89 149 DP1AR1478W( ) 1,018. 1,216.
849 3/89 149 DP1AR1484W( ) 1,100. 1,308.
909 3/89 149 DP1AR1490W( ) 1,187. 1,415.
969 3/89 149 DP1AR1496W( ) 1,285. 1,527.
Recessed Shortened FramelessAdd Up, 149 high
149 3/89 149 DP1AR1414W( ) 318. 392.
179 3/89 149 DP1AR1417W( ) 371. 421.
239 3/89 149 DP1AR1423W( ) 421. 482.
299 3/89 149 DP1AR1429W( ) 469. 545.
359 3/89 149 DP1AR1435W( ) 539. 627.
419 3/89 149 DP1AR1441W( ) 605. 710.
479 3/89 149 DP1AR1447W( ) 677. 794.
539 3/89 149 DP1AR1453W( ) 743. 875.
599 3/89 149 DP1AR1459W( ) 807. 956.
659 3/89 149 DP1AR1465W( ) 877. 1,033.
719 3/89 149 DP1AR1471W( ) 944. 1,124.
779 3/89 149 DP1AR1477W( ) 1,018. 1,216.
839 3/89 149 DP1AR1483W( ) 1,100. 1,289.
899 3/89 149 DP1AR1489W( ) 1,187. 1,415.
959 3/89 149 DP1AR1495W( ) 1,285. 1,527.
Ordering Information
Frameless Add Up with ClearGlass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Upwith Clear Glass
Example: DP1AR1436WTEMP117
DP1AR Recessed FramelessAdd Up
14 79 High
36 369 Wide
W 3/89 Thick
TEMP Clear glass finish
117 Frame finish
Included with:
Recessed FramelessAdd Up with Clear Glass
• Attachment hardware• Alignment Clip
Options
Frame Options:
Glass Options:(TEMP) = Clear(GL60) = Laminated Powder
Dividends Horizon
89
Pan
els,
Bui
ld-T
o-S
pec
Recessed Frameless Add Up1/49 Clear and Powder Glass
description w d h pattern no.Clear
(TEMP)Frosted(GL13)
Recessed Frameless Add Up,79 High
159 1/49 79 DP1AR0715E( ) $256. $312.
189 1/49 79 DP1AR0718E( ) 278. 321.
249 1/49 79 DP1AR0724E( ) 300. 342.
309 1/49 79 DP1AR0730E( ) 323. 362.
369 1/49 79 DP1AR0736E( ) 360. 398.
429 1/49 79 DP1AR0742E( ) 378. 448.
489 1/49 79 DP1AR0748E( ) 417. 497.
549 1/49 79 DP1AR0754E( ) 483. 575.
609 1/49 79 DP1AR0760E( ) 521. 624.
669 1/49 79 DP1AR0766E( ) 561. 669.
729 1/49 79 DP1AR0772E( ) 596. 718.
789 1/49 79 DP1AR0778E( ) 637. 765.
849 1/49 79 DP1AR0784E( ) 672. 806.
909 1/49 79 DP1AR0790E( ) 717. 868.
969 1/49 79 DP1AR0796E( ) 761. 904.
Recessed Shortened FramelessAdd Up, 79 High
149 1/49 79 DP1AR0714E( ) 251. 312.
179 1/49 79 DP1AR0717E( ) 257. 321.
239 1/49 79 DP1AR0723E( ) 283. 342.
299 1/49 79 DP1AR0729E( ) 320. 362.
359 1/49 79 DP1AR0735E( ) 358. 398.
419 1/49 79 DP1AR0741E( ) 375. 448.
479 1/49 79 DP1AR0747E( ) 416. 507.
539 1/49 79 DP1AR0753E( ) 483. 583.
599 1/49 79 DP1AR0759E( ) 519. 637.
659 1/49 79 DP1AR0765E( ) 554. 670.
719 1/49 79 DP1AR0771E( ) 591. 718.
779 1/49 79 DP1AR0777E( ) 627. 784.
839 1/49 79 DP1AR0783E( ) 668. 816.
899 1/49 79 DP1AR0789E( ) 714. 868.
959 1/49 79 DP1AR0795E( ) 751. 904.
Ordering Information
Frameless Add Up withClear Glass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Upwith Clear Glass
Example: DP1AR0736ETEMP117
DP1AR Recessed FramelessAdd Up
07 79 High
36 369 Wide
E 1/49 Thick
TEMP Clear glass finish
117 Frame finish
Included with
Recessed FramelessAdd Up with Clear Glass
• Attachment hardware• Topway Trough Spacer• Alignment Clip
Options
Frame Options:
Glass Options:(TEMP) = Clear(GL13) = Frosted
Dividends Horizon
90
Recessed Frameless Add Up1/49 Clear and Powder Glass
description w d h pattern no.Clear
(TEMP)Frosted(GL13)
Recessed Frameless Add Up,149 High
159 1/49 149 DP1AR1415E( ) $273. $303.
189 1/49 149 DP1AR1418E( ) 315. 358.
249 1/49 149 DP1AR1424E( ) 359. 409.
309 1/49 149 DP1AR1430E( ) 398. 463.
369 1/49 149 DP1AR1436E( ) 458. 532.
429 1/49 149 DP1AR1442E( ) 514. 603.
489 1/49 149 DP1AR1448E( ) 575. 674.
549 1/49 149 DP1AR1454E( ) 631. 744.
609 1/49 149 DP1AR1460E( ) 688. 814.
669 1/49 149 DP1AR1466E( ) 745. 879.
729 1/49 149 DP1AR1472E( ) 802. 950.
789 1/49 149 DP1AR1478E( ) 866. 1,032.
849 1/49 149 DP1AR1484E( ) 934. 1,112.
909 1/49 149 DP1AR1490E( ) 1,009. 1,202.
969 1/49 149 DP1AR1496E( ) 1,091. 1,297.
Recessed Shortened FramelessAdd Up, 149 high
149 1/49 149 DP1AR1414E( ) 272. 303.
179 1/49 149 DP1AR1417E( ) 315. 358.
239 1/49 149 DP1AR1423E( ) 358. 409.
299 1/49 149 DP1AR1429E( ) 399. 463.
359 1/49 149 DP1AR1435E( ) 458. 532.
419 1/49 149 DP1AR1441E( ) 515. 603.
479 1/49 149 DP1AR1447E( ) 575. 674.
539 1/49 149 DP1AR1453E( ) 631. 744.
599 1/49 149 DP1AR1459E( ) 688. 814.
659 1/49 149 DP1AR1465E( ) 745. 879.
719 1/49 149 DP1AR1471E( ) 802. 955.
779 1/49 149 DP1AR1477E( ) 866. 1,032.
839 1/49 149 DP1AR1483E( ) 934. 1,097.
899 1/49 149 DP1AR1489E( ) 1,009. 1,202.
959 1/49 149 DP1AR1495E( ) 1,091. 1,297.
Ordering Information
Frameless Add Up withClear Glass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Upwith Clear Glass
Example: DP1AR0736ETEMP117
DP1AR Recessed FramelessAdd Up
07 79 High
36 369 Wide
E 1/49 Thick
TEMP Clear glass finish
117 Frame finish
Included with
Recessed FramelessAdd Up with Clear Glass
• Attachment hardware• Topway Trough Spacer• Alignment clip
Options
Frame Options:
Glass Options:(TEMP) = Clear(GL13) = Frosted
Dividends Horizon
91
Pan
els,
Bui
ld-T
o-S
pec
Recessed Frameless Add Up1/49 Clear and Powder Glass
description w d h pattern no.Clear
(TEMP)Frosted(GL13)
Recessed Frameless Add Up,219 high
159 1/49 219 DP1AR2115E( ) $366. $407.
189 1/49 219 DP1AR2118E( ) 422. 481.
249 1/49 219 DP1AR2124E( ) 482. 550.
309 1/49 219 DP1AR2130E( ) 536. 623.
369 1/49 219 DP1AR2136E( ) 615. 715.
429 1/49 219 DP1AR2142E( ) 691. 811.
489 1/49 219 DP1AR2148E( ) 773. 906.
549 1/49 219 DP1AR2154E( ) 848. 1,000.
609 1/49 219 DP1AR2160E( ) 924. 1,095.
669 1/49 219 DP1AR2166E( ) 1,001. 1,181.
729 1/49 219 DP1AR2172E( ) 1,078. 1,277.
789 1/49 219 DP1AR2178E( ) 1,164. 1,387.
849 1/49 219 DP1AR2184E( ) 1,255. 1,495.
909 1/49 219 DP1AR2190E( ) 1,355. 1,616.
969 1/49 219 DP1AR2196E( ) 1,466. 1,744.
Recessed Shortened FramelessAdd Up, 219 high
149 1/49 219 DP1AR2114E( ) 365. 407.
179 1/49 219 DP1AR2117E( ) 422. 481.
239 1/49 219 DP1AR2123E( ) 481. 550.
299 1/49 219 DP1AR2129E( ) 537. 623.
359 1/49 219 DP1AR2135E( ) 615. 715.
419 1/49 219 DP1AR2141E( ) 692. 811.
479 1/49 219 DP1AR2147E( ) 773. 906.
539 1/49 219 DP1AR2153E( ) 848. 1,000.
599 1/49 219 DP1AR2159E( ) 924. 1,095.
659 1/49 219 DP1AR2165E( ) 1,001. 1,181.
719 1/49 219 DP1AR2171E( ) 1,078. 1,284.
779 1/49 219 DP1AR2177E( ) 1,164. 1,387.
839 1/49 219 DP1AR2183E( ) 1,255. 1,474.
899 1/49 219 DP1AR2189E( ) 1,355. 1,616.
959 1/49 219 DP1AR2195E( ) 1,466. 1,744.
Ordering Information
Frameless Add Up withClear Glass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Upwith Clear Glass
Example: DP1AR2136ETEMP117
DP1AR Recessed FramelessAdd Up
21 219 High
36 369 Wide
E 1/49 Thick
TEMP Clear glass finish
117 Frame finish
Included with
Recessed FramelessAdd Up with Clear Glass
• Attachment hardware• Topway Trough Spacer• Alignment clip
Options
Frame Options:
Glass Options:(TEMP) = Clear(GL13) = Frosted
Dividends Horizon
92
Dividends Horizon DP8 Post AssembliesL, T and X Configurations
description h w d pattern no.Metal
P1Metal
P2Metal
P3 Veneer
Dividends HorizonTwo-Way Post Assembly (‘‘L’’)
28 1/29 39 39 DP8(C/V/U)PAWH2( ) $216. $228. $240. $688.
369 39 39 DP8(C/V/U)PA362( ) 216. 228. 240. 690.
429 39 39 DP8(C/V/U)PA422( ) 216. 228. 240. 711.
509 39 39 DP8(C/V/U)PA502( ) 233. 249. 257. 774.
579 39 39 DP8(C/V/U)PA572( ) 276. 292. 304. 900.
649 39 39 DP8(C/V/U)PA642( ) 276. 292. 304. 933.
789 39 39 DP8(C/V/U)PA782( ) 399. 424. 441. 1,121.
Dividends HorizonThree-Way Post Assembly (‘‘T’’)
28 1/29 39 39 DP8(C/V/U)PAWH3( ) 226. 237. 249. 653.
369 39 39 DP8(C/V/U)PA363( ) 226. 237. 249. 693.
429 39 39 DP8(C/V/U)PA423( ) 226. 237. 249. 708.
509 39 39 DP8(C/V/U)PA503( ) 240. 252. 262. 740.
579 39 39 DP8(C/V/U)PA573( ) 276. 293. 304. 799.
649 39 39 DP8(C/V/U)PA643( ) 276. 293. 304. 873.
789 39 39 DP8(C/V/U)PA783( ) 395. 414. 439. 1,004.
Dividends HorizonFour-Way Post Assembly (‘‘X’’)
28 1/29 39 39 DP8(C/V/U)PAWH4( ) 208. 218. 229. 382.
369 39 39 DP8(C/V/U)PA364( ) 208. 218. 229. 387.
429 39 39 DP8(C/V/U)PA424( ) 208. 218. 229. 388.
509 39 39 DP8(C/V/U)PA504( ) 218. 232. 246. 405.
579 39 39 DP8(C/V/U)PA574( ) 252. 263. 277. 427.
649 39 39 DP8(C/V/U)PA644( ) 252. 263. 277. 441.
789 39 39 DP8(C/V/U)PA784( ) 362. 380. 399. 513.
Ordering Information
Post Assemblies
1. Pattern Number2. Finish
Order Code
Post Assemblies
Example: DP8A362,5,113
613 Silver Paint Finish
Included with:
Post Assemblies
• Post• Post top cap• Post cover• Connecting hardware
Options
Post Assemblies
(4) = Radius Metal(5) = Flat Metal(V4) =Radius Veneer(V5) = Flat Veneer
Note: Plastic versions not available.
Dividends Horizon
93
Pos
tC
onne
ctor
s/E
ndTr
im
Dividends Horizon DP8 Post AssembliesRecessed Add Up Glass L, T and X Configurationa
description h w d pattern no.Metal
P1Metal
P2Metal
P3
Dividends HorizonTwo-Way Post Assembly (‘‘L’’)for Recessed Glass
28 1/29 39 39 DP8CPAGWH25 $216. $228. $240.
369 39 39 DP8CPAG3625 216. 228. 240.
429 39 39 DP8CPAG4225 216. 228. 240.
509 39 39 DP8CPAG5025 233. 249. 257.
579 39 39 DP8CPAG5725 276. 292. 304.
649 39 39 DP8CPAG6425 276. 292. 304.
789 39 39 DP8CPAG7825 399. 424. 441.
Dividends HorizonThree-Way Post Assembly (‘‘T’’)for Recessed Glass
28 1/29 39 39 DP8CPAGWH35 226. 237. 249.
369 39 39 DP8CPAG3635 226. 237. 249.
429 39 39 DP8CPAG4235 226. 237. 249.
509 39 39 DP8CPAG5035 240. 252. 262.
579 39 39 DP8CPAG5735 276. 293. 304.
649 39 39 DP8CPAG6435 276. 293. 304.
789 39 39 DP8CPAG7835 395. 414. 439.
Dividends HorizonFour-Way Post Assembly (‘‘X’’)for Recessed Glass
28 1/29 39 39 DP8CPAGWH45 208. 218. 229.
369 39 39 DP8CPAG3645 208. 218. 229.
429 39 39 DP8CPAG4245 208. 218. 229.
509 39 39 DP8CPAG5045 218. 232. 246.
579 39 39 DP8CPAG5745 252. 263. 277.
649 39 39 DP8CPAG6445 252. 263. 277.
789 39 39 DP8CPAG7845 362. 380. 399.
Ordering Information
Post Assemblies
1. Pattern Number2. Finish
Order Code
Post Assemblies
Example: DP8CPAG3625,613
DP8CPAG Pattern Number
36 Height
2 Assembly Type
5 Flat End Trim
613 Silver Paint Finish
Included with:
Post Assemblies
• Post• Post top cap• Post cover• Connecting hardware
Dividends Horizon
94
Dividends Horizon DP8 Post ComponentsPost, Stack Panel Post, Post Top Caps and Inside Corner RacewayFiller
description type h w d pattern no. list price P1 P2 P3 Veneer
Dividends HorizonUniversal Post
28 1/29 39 39 DP8POWH $113.
369 39 39 DP8PO36 113.
429 39 39 DP8PO42 113.
509 39 39 DP8PO50 131.
579 39 39 DP8PO57 157.
649 39 39 DP8PO64 157.
789 39 39 DP8PO78 271.
Dividends HorizonUniversal Post-Four-Way High-Low
28 1/29 39 39 DP8(C/V/U)POWH4 123.
369 39 39 DP8(C/V/U)PO364 123.
429 39 39 DP8(C/V/U)PO424 125.
509 39 39 DP8(C/V/U)PO504 144.
579 39 39 DP8(C/V/U)PO574 168.
649 39 39 DP8(C/V/U)PO644 168.
789 39 39 DP8(C/V/U)PO784 281.
Dividends HorizonUniversal Post-Three-Way High-Low
28 1/29 39 39 DP8(C/V/U)POWH3 123.
369 39 39 DP8(C/V/U)PO363 123.
429 39 39 DP8(C/V/U)PO423 125.
509 39 39 DP8(C/V/U)PO503 144.
579 39 39 DP8(C/V/U)PO573 168.
649 39 39 DP8(C/V/U)PO643 168.
789 39 39 DP8(C/V/U)PO783 281.
Ordering Information
Post Top Cap
1. Pattern number2. Finish
Order Code
Post Top Caps
Example: DP8PTG45
DP8PTG Pattern Number
4 Configuration
5 Flat End Trim
613 Silver Paint Finish
Included with: Options
Post Top Caps Options(5) = Flat Metal(V5) = Flat Veneer
An inside corner raceway filler isused to block the light leak createdwhen two raceway covers meet at a90° connection.
Dividends Horizon
95
Pos
tC
onne
ctor
s/E
ndTr
im
Dividends Horizon DP8 Post ComponentsPost, Stack Panel Post, Post Top Caps and Inside Corner RacewayFiller
description type h w d pattern no. list price P1 P2 P3 Veneer
Dividends HorizonUniversal Post-Two-Way High-Low
28 1/29 39 39 DP8(C/V/U)POWH2 $123.
369 39 39 DP8(C/V/U)PO362 123.
429 39 39 DP8(C/V/U)PO422 125.
509 39 39 DP8(C/V/U)PO502 144.
579 39 39 DP8(C/V/U)PO572 168.
649 39 39 DP8(C/V/U)PO642 168.
789 39 39 DP8(C/V/U)PO782 281.
Dividends HorizonUniversal Post-Straight High-Low
28 1/29 39 39 DP8(C/V/U)POWHS 123.
369 39 39 DP8(C/V/U)PO36S 123.
429 39 39 DP8(C/V/U)PO42S 125.
429 39 39 DP8(C/V/U)PO50S 144.
579 39 39 DP8(C/V/U)PO57S 168.
649 39 39 DP8(C/V/U)PO64S 168.
789 39 39 DP8(C/V/U)PO78S 281.
149 High Dividends Horizon Stack Panel Post 14 5/89 39 39 DP8SPO14 118.
219 High Dividends Horizon Stack Panel Post 21 15/169 39 39 DP8SPO21 119.
Ordering Information
Post Top Cap
1. Pattern number2. Finish
Order Code
Post Top Caps
Example: DP8PTG45
DP8PTG Pattern Number
4 Configuration
5 Flat End Trim
613 Silver Paint Finish
Included with: Options
Post Top Caps Options(5) = Flat Metal(V5) = Flat Veneer
An inside corner raceway filler isused to block the light leak createdwhen two raceway covers meet at a90° connection.
Dividends Horizon
96
Dividends Horizon DP8 Post ComponentsPost, Stack Panel Post, Post Top Caps and Inside Corner RacewayFiller
description type h w d pattern no. list price P1 P2 P3 Veneer
289 High Dividends Horizon Stack Panel Post 29 1/49 39 39 DP8SPO28 $135.
Worksurface Height PanelChange of Height Kit
DP7HLCWH 87.
Dividends HorizonPost Top Cap Assemblies
Four-Way 1/29 39 39 DP8(C/V/U)PT4( ) 9. 10. 10. 150.
In-line Straght 1/29 39 39 DP8(C/V/U)PTS( ) 9. 10. 10. 145.
One-Way 1/29 39 39 DP8(C/V/U)PT1( ) 9. 10. 10. 129.
Three-Way 1/29 39 39 DP8(C/V/U)PT3( ) 9. 10. 10. 146.
Two-Way 1/29 39 39 DP8(C/V/U)PT2( ) 9. 10. 10. 147.
Ordering Information
Post Top Cap
1. Pattern number2. Finish
Order Code
Post Top Caps
Example: DP8PTG45
DP8PTG Pattern Number
4 Configuration
5 Flat End Trim
613 Silver Paint Finish
Included with: Options
Post Top Caps Options(5) = Flat Metal(V5) = Flat Veneer
An inside corner raceway filler isused to block the light leak createdwhen two raceway covers meet at a90° connection.
Dividends Horizon
97
Pos
tC
onne
ctor
s/E
ndTr
im
Dividends Horizon DP8 Post ComponentsPost Top Caps for Recessed Glass, Filler, Connectors
description type h w d pattern no. list price P1 P2 P3
Dividends HorizonPost Top Cap Assembliesfor Recessed Glass
Four-Way 1/29 39 39 DP8CPTG45 $9. $10. $10.
In-line Straight 1/29 39 39 DP8CPTGS5 9. 10. 10.
One-Way 1/29 39 39 DP8CPTG15 9. 10. 10.
Three-Way 1/29 39 39 DP8CPTG35 9. 10. 10.
Two-Way 1/29 39 39 DP8CPTG25 9. 10. 10.
Inside Corner Raceway Filler DP7BF 12.
Panel to Panel Connectors High-low (10 qty) 1 1/29 1/29 1/29 DP8HLC 35.
In Line (10 qty) 6 1/29 3/49 1/49 DP8PPC 26.
Ordering Information
Post Top Cap
1. Pattern number2. Finish
Order Code
Post Top Caps
Example: DP8CPTG45
613 Silver Paint Finish
Included with: Options
Post Top Caps Options(4) = Radius Metal(5) = Flat Metal(V4) = Radius Veneer(V5) = Flat Veneer
An inside corner raceway filler isused to block the light leak createdwhen two raceway covers meet at a90° connection.
Dividends Horizon
98
Dividends Horizon DP8 Post ComponentsPost Covers and High Low Post Covers
description h pattern no.Metal
P1Metal
P2Metal
P3 Veneer
Dividends HorizonPost Covers Full Height ‘‘T’’
1069 DP8PC106 $165. $173. $183. $778.
369 DP8PC36 72. 76. 99. 326.
429 DP8PC42 72. 76. 99. 342.
509 DP8PC50 73. 80. 85. 355.
579 DP8PC57 84. 88. 94. 400.
649 DP8PC64 84. 88. 94. 462.
719 DP8PC71 89. 98. 103. 484.
789 DP8PC78 94. 105. 108. 521.
859 DP8PC85 106. 114. 121. 574.
929 DP8PC92 121. 130. 142. 609.
999 DP8PC99 143. 153. 164. 716.
28 1/29 DP8PCWH 72. 76. 99. 286.
28 1/29 + 149 DP8PCWHS14 151. 168. 175. n/a
28 1/29 + 219 DP8PCWHS21 167. 185. 191. n/a
28 1/29 + 289 DP8PCWHS28 176. 194. 201. n/a
Dividends HorizonPost Covers Full Height ‘‘L’’
1069 DP8PC1062 195. 212. 228. 909.
369 DP8PC362 112. 117. 121. 392.
429 DP8PC422 112. 117. 121. 413.
509 DP8PC502 117. 122. 127. 464.
579 DP8PC572 124. 131. 145. 575.
649 DP8PC642 124. 131. 145. 595.
719 DP8PC712 131. 142. 151. 658.
789 DP8PC782 145. 154. 157. 717.
859 DP8PC852 153. 163. 167. 754.
929 DP8PC922 165. 182. 198. 813.
999 DP8PC992 182. 195. 212. 872.
28 1/29 DP8PCWH2 112. 117. 121. 394.
28 1/29 + 149 DP8PCWHS142 160. 175. 183. n/a
28 1/29 + 219 DP8PCWHS212 169. 187. 195. n/a
28 1/29 + 289 DP8PCWHS282 180. 195. 202. n/a
Dividends HorizonHigh Low Post Covers
369 - 429 DP8PC07( ) 12. 14. 14. 224.
429 - 509 DP8PC07( ) 12. 14. 14. 224.
509 - 579 DP8PC07( ) 12. 14. 14. 224.
579 - 649 DP8PC07( ) 12. 14. 14. 224.
369 - 509 DP8PC14( ) 22. 34. 37. 252.
429 - 579 DP8PC14( ) 22. 34. 37. 252.
649 - 789 DP8PC14( ) 22. 34. 37. 252.
509 - 649 DP8PC14( ) 22. 34. 37. 252.
Ordering Information
Post Covers
1. Pattern number2. Finish
Order Code
Post Top Caps
Example: DP8PT45
613 Silver Paint Finish
Included with: Options
Post CoversAdd a ‘‘V’’ suffix to the base patternnumber for a veneer finish.
High Low Post Covers Options(H) = Straight Condition(RH) = Right Hand Condition(LH) = Left Hand Condition
Two DP8HLC - Panel to PanelConnectors High-low (a.k.a utilityconnector assembly) ship with thehi-lo post cover.
Dividends Horizon
99
Pos
tC
onne
ctor
s/E
ndTr
im
Dividends Horizon DP8 Post ComponentsPost Covers and High Low Post Covers
description h pattern no.Metal
P1Metal
P2Metal
P3 Veneer
Dividends HorizonHigh Low Post Covers
369 - 579 DP8PC21( ) $40. $41. $42. $276.
429 - 649 DP8PC21( ) 40. 41. 42. 276.
579 - 789 DP8PC21( ) 40. 41. 42. 276.
509 - 789 DP8PC28( ) 58. 64. 65. 299.
369 - 649 DP8PC28( ) 58. 64. 65. 299.
429 - 789 DP8PC36( ) 76. 84. 88. 358.
369 - 789 DP8PC42( ) 85. 92. 96. 392.
28 1/29 - 369 DP8PCWH36( ) 124. 136. 142. n/a
28 1/29 - 429 DP8PCWH42( ) 130. 144. 149. n/a
28 1/29 - 509 DP8PCWH50( ) 149. 166. 171. n/a
28 1/29 - 579 DP8PCWH57( ) 150. 167. 173. n/a
28 1/29 - 649 DP8PCWH64( ) 151. 168. 175. n/a
28 1/29 - 789 DP8PCWH78( ) 157. 173. 182. n/a
Dividends Horizon PostCovers Full HeightDouble Underlap
369 DP8PC36U 175. 191. 199. 367.
429 DP8PC42U 182. 196. 204. 400.
509 DP8PC50U 198. 217. 229. 452.
579 DP8PC57U 199. 220. 231. 493.
649 DP8PC64U 217. 241. 251. 547.
789 DP8PC78U 299. 328. 342. 699.
28 1/29 DP8PCWHU 167. 185. 191. 340.
Dividends Horizon High Low Post Covers DoubleUnderlap
579-649 DP8PC07UH 130. 144. 149. 265.
429-509 DP8PC07UH 130. 144. 149. 265.
369-429 DP8PC07UH 130. 144. 149. 265.
509-579 DP8PC07UH 130. 144. 149. 265.
429-579 DP8PC14UH 135. 150. 157. 307.
369-509 DP8PC14UH 135. 150. 157. 307.
509-649 DP8PC14UH 135. 150. 157. 307.
649-789 DP8PC14UH 135. 150. 157. 307.
579-789 DP8PC21UH 134. 149. 154. 319.
369-579 DP8PC21UH 134. 149. 154. 319.
429-649 DP8PC28UH 146. 161. 167. 352.
369-649 DP8PC28UH 146. 161. 167. 352.
509-789 DP8PC28UH 146. 161. 167. 352.
Ordering Information
Post Covers
1. Pattern number2. Finish
Order Code
Post Top Caps
Example: DP8PT45
613 Silver Paint Finish
Included with: Options
Post CoversAdd a ‘‘V’’ suffix to the base patternnumber for a veneer finish.
High Low Post Covers Options(H) = Straight Condition(RH) = Right Hand Condition(LH) = Left Hand Condition
Two DP8HLC - Panel to PanelConnectors High-low (a.k.a utilityconnector assembly) ship with thehi-lo post cover.
Dividends Horizon
100
Panel End Trim and Panel Top CapsPanel End and High-Low Panel End
description type h * w d pattern no.Metal
P1Metal
P2Metal
P3 Veneer
Panel End 1069 1069 39 5/89 DP( )PE106 $141. $147. $155. $675.
28 1/29 28 1/29 39 5/89 DP( )PEWH 87. 97. 101. 304.
369 369 39 5/89 DP( )PE36F 87. 97. 101. 318.
429 429 39 5/89 DP( )PE42 91. 99. 102. 340.
28 1/29 + 149 42 1/29 39 5/89 DP( )PEWHS14 101. 108. 112. 271.
28 1/29 + 219 49 1/29 39 5/89 DP( )PEWHS21 105. 113. 118. 287.
509 509 39 5/89 DP( )PE50 96. 101. 103. 382.
28 1/29 + 289 56 1/29 39 5/89 DP( )PEWHS28 107. 117. 120. 299.
579 579 39 5/89 DP( )PE57 99. 103. 106. 427.
649 649 39 5/89 DP( )PE64 99. 103. 106. 462.
719 719 39 5/89 DP( )PE71 102. 108. 110. 480.
789 789 39 5/89 DP( )PE78 106. 110. 114. 504.
859 859 39 5/89 DP( )PE85 109. 117. 120. 527.
929 929 39 5/89 DP( )PE92 118. 124. 130. 575.
999 999 39 5/89 DP( )PE99 128. 134. 144. 627.
Panel End forRecessed Glass
28 1/29 28 1/29 39 5/89 DP5PEGWH 87. 97. 101.
369 369 39 5/89 DP5PEG36F 87. 97. 101.
429 429 39 5/89 DP5PEG42 91. 99. 102.
28 1/29 + 149 42 1/29 39 5/89 DP5PEGWHS14 101. 108. 112.
28 1/29 + 219 49 1/29 39 5/89 DP5PEGWHS21 105. 113. 118.
509 509 39 5/89 DP5PEG50 96. 101. 103.
28 1/29 + 289 56 1/29 39 5/89 DP5PEGWHS28 107. 117. 120.
579 579 39 5/89 DP5PEG57 99. 103. 106.
649 649 39 5/89 DP5PG64 99. 103. 106.
789 789 39 5/89 DP5PEG78 106. 110. 114.
Panel End, High-Low 28 1/29 - 429 13 1/29 39 3/89 DP( )PEWH42 77. 86. 88. 340.
509 - 649 149 39 3/89 DP( )PE14 58. 62. 63. 271.
369 - 509 149 39 3/89 DP( )PE14 58. 62. 63. 271.
649 - 789 149 39 3/89 DP( )PE14 58. 62. 63. 271.
429 - 579 159 39 3/89 DP( )PE14 58. 62. 63. 271.
579 - 789 219 39 3/89 DP( )PE22 62. 65. 67. 287.
369 - 579 219 39 3/89 DP( )PE22 62. 65. 67. 287.
28 1/29 - 509 21 1/29 39 3/89 DP( )PEWH50 84. 91. 96. 382.
h* = Nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Panel End
1. Pattern Number2. Trim Finish
High-Low Panel End
1. Pattern Number2. Trim Finish
Order Code
Panel End
Example: DP2A PE42, 117
DP2APE42
Pattern Number
117 Soft grey
High-Low Panel End
Example: DP2A PE42 117
DP2APE42
Pattern Number
117 Soft Grey
Included with:
Panel End
• Panel end cover• Connecting hardware
High-Low Panel End
• Panel end cover• Connecting hardware• Lower transition cap
Options
Panel End, High-Low Panel Endand Top Caps
Trim options(4) = Radius Metal(5) = Flat Metal(V5) = Flat Veneer
Dividends Horizon
101
Pos
tC
onne
ctor
s/E
ndTr
im
Panel End Trim and Panel Top CapsPanel End and High-Low Panel End
description type h * w d pattern no.Metal
P1Metal
P2Metal
P3 Veneer
Panel End, High-Low 429 - 649 229 39 3/89 DP( )PE22 $62. $65. $67. $287.
369 - 649 289 39 3/89 DP( )PE28 73. 78. 85. 299.
509 - 789 289 39 3/89 DP( )PE28 73. 78. 85. 299.
28 1/29 - 579 28 1/29 39 3/89 DP( )PEWH57 87. 99. 102. 427.
28 1/29 - 649 35 1/29 39 3/89 DP( )PEWH64 91. 102. 106. 463.
429 - 789 369 39 3/89 DP( )PE36 87. 97. 101. 321.
369 - 789 429 39 3/89 DP( )PE42H 91. 99. 102. 345.
28 1/29 - 789 49 1/29 39 3/89 DP( )PEWH78 102. 109. 113. 504.
369 - 429 69 39 3/89 DP( )PE08 54. 58. 61. 235.
509 - 579 79 39 3/89 DP( )PE08 54. 58. 61. 235.
579 - 649 79 39 3/89 DP( )PE08 54. 58. 61. 235.
28 1/29 - 369 7 1/29 39 3/89 DP( )PEWH36 70. 81. 85. 318.
429 - 509 89 39 3/89 DP( )PE08 54. 58. 61. 235.
h* = Nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Panel End
1. Pattern Number2. Trim Finish
High-Low Panel End
1. Pattern Number2. Trim Finish
Order Code
Panel End
Example: DP2A PE42, 117
DP2APE42
Pattern Number
117 Soft grey
High-Low Panel End
Example: DP2A PE42 117
DP2APE42
Pattern Number
117 Soft Grey
Included with:
Panel End
• Panel end cover• Connecting hardware
High-Low Panel End
• Panel end cover• Connecting hardware• Lower transition cap
Options
Panel End, High-Low Panel Endand Top Caps
Trim options(4) = Radius Metal(5) = Flat Metal(V5) = Flat Veneer
Dividends Horizon
102
Panel End Trim and Panel Top CapsHigh-Low Panel End Trim for Recessed Add Up Glass
description type h * w d pattern no.Metal
P1Metal
P2Metal
P3
Panel End, High-LowGlass Lower Panel/No Glass Upper
28 1/29 - 369 7 1/29 39 3/89 DP5PEGNWH36 $70. $81. $85.
28 1/29 - 429 13 1/29 39 3/89 DP5PEGNWH42 77. 86. 88.
28 1/29 - 509 21 1/29 39 3/89 DP5PEGNWH50 84. 91. 96.
28 1/29 - 579 28 1/29 39 3/89 DP5PEGNWH57 87. 99. 102.
28 1/29 - 649 35 1/29 39 3/89 DP5PEGNWH64 91. 102. 106.
28 1/29 - 789 49 1/29 39 3/89 DP5PEGNWH78 102. 109. 113.
369 - 429 69 39 3/89 DP5PEGN08 54. 58. 63.
369 - 509 149 39 3/89 DP5PEGN14 58. 62. 63.
369 - 579 219 39 3/89 DP5PEGN22 62. 65. 67.
369 - 649 289 39 3/89 DP5PEGN28 73. 78. 85.
369 - 789 429 39 3/89 DP5PEGN42H 91. 99. 102.
429 - 509 89 39 3/89 DP5PEGN08 54. 58. 63.
429 - 579 159 39 3/89 DP5PEGN14 58. 62. 63.
429 - 649 229 39 3/89 DP5PEGN22 62. 65. 67.
429 - 789 369 39 3/89 DP5PEGN36 87. 97. 101.
509 - 579 79 39 3/89 DP5PEGN08 54. 58. 63.
509 - 649 149 39 3/89 DP5PEGN14 58. 62. 63.
509 - 789 289 39 3/89 DP5PEGN28 73. 78. 85.
579 - 649 79 39 3/89 DP5PEGN08 54. 58. 63.
579 - 789 219 39 3/89 DP5PEGN22 62. 65. 67.
649 - 789 149 39 3/89 DP5PEGN14 58. 62. 63.
h* = Nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
High-Low Panel End
1. Pattern Number2. Trim Finish
Order Code
High-Low Panel End
Example: DP5PEGG42H 117
DP5PE Pattern Number
GG Configuration
42 Height
117 Soft Grey
Included with:
High-Low Panel End
• Panel end cover• Connecting hardware
Options
Panel End, High-Low Panel Endand Top Caps
Trim options
Dividends Horizon
103
Pos
tC
onne
ctor
s/E
ndTr
im
Panel End Trim and Panel Top CapsHigh-Low Panel End Trim for Recessed Add Up Glass
description type h * w d pattern no.Metal
P1Metal
P2Metal
P3
Panel End, High-LowGlass Lower Panel/Glass Upper Panel
28 1/29 - 369 7 1/29 39 3/89 DP5PEGGWH36 $70. $81. $85.
28 1/29 - 429 13 1/29 39 3/89 DP5PEGGWH42 77. 86. 88.
28 1/29 - 509 21 1/29 39 3/89 DP5PEGGWH50 84. 91. 96.
28 1/29 - 579 28 1/29 39 3/89 DP5PEGGWH57 87. 99. 102.
28 1/29 - 649 35 1/29 39 3/89 DP5PEGGWH64 91. 102. 106.
28 1/29 - 789 49 1/29 39 3/89 DP5PEGGWH78 102. 109. 113.
369 - 429 69 39 3/89 DP5PEGG08 54. 58. 63.
369 - 509 149 39 3/89 DP5PEGG14 58. 62. 63.
369 - 579 219 39 3/89 DP5PEGG22 62. 65. 67.
369 - 649 289 39 3/89 DP5PEGG28 73. 78. 85.
369 - 789 429 39 3/89 DP5PEGG42H 91. 99. 102.
429 - 509 89 39 3/89 DP5PEGG08 54. 58. 63.
429 - 579 159 39 3/89 DP5PEGG14 58. 62. 63.
429 - 649 229 39 3/89 DP5PEGG22 62. 65. 67.
429 - 789 369 39 3/89 DP5PEGG36 87. 97. 101.
509 - 579 79 39 3/89 DP5PEGG08 54. 58. 63.
509 - 649 149 39 3/89 DP5PEGG14 58. 62. 63.
509 - 789 289 39 3/89 DP5PEGG28 73. 78. 85.
579 - 649 79 39 3/89 DP5PEGG08 54. 58. 63.
579 - 789 219 39 3/89 DP5PEGG22 62. 65. 67.
649 - 789 149 39 3/89 DP5PEGG14 58. 62. 63.
h* = Nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
High-Low Panel End
1. Pattern Number2. Trim Finish
Order Code
High-Low Panel End
Example: DP5PEGG42H 117
DP5PE Pattern Number
GG Configuration
42 Height
117 Soft Grey
Included with:
High-Low Panel End
• Panel end cover• Connecting hardware
Options
Panel End, High-Low Panel Endand Top Caps
Trim options
Dividends Horizon
104
Panel End Trim and Panel Top CapsHigh-Low Panel End Trim for Recessed Add Up Glass
description type h * w d pattern no.Metal
P1Metal
P2Metal
P3
Panel End, High-LowNo Glass Lower Panel/Glass Upper Panel
28 1/29 - 369 7 1/29 39 3/89 DP5PENGWH36 $70. $81. $85.
28 1/29 - 429 13 1/29 39 3/89 DP5PENGWH42 77. 86. 88.
28 1/29 - 509 21 1/29 39 3/89 DP5PENGWH50 84. 91. 96.
28 1/29 - 579 28 1/29 39 3/89 DP5PENGWH57 87. 99. 102.
28 1/29 - 649 35 1/29 39 3/89 DP5PENGWH64 91. 102. 106.
28 1/29 - 789 49 1/29 39 3/89 DP5PENGWH78 102. 109. 113.
369 - 429 69 39 3/89 DP5PENG08 54. 58. 63.
369 - 509 149 39 3/89 DP5PENG14 58. 62. 63.
369 - 579 219 39 3/89 DP5PENG22 62. 65. 67.
369 - 649 289 39 3/89 DP5PENG28 73. 78. 85.
369 - 789 429 39 3/89 DP5PENG42H 91. 99. 102.
429 - 509 89 39 3/89 DP5PENG08 54. 58. 63.
429 - 579 159 39 3/89 DP5PENG14 58. 62. 63.
429 - 649 229 39 3/89 DP5PENG22 62. 65. 67.
429 - 789 369 39 3/89 DP5PENGG36 87. 97. 101.
509 - 579 79 39 3/89 DP5PENG08 54. 58. 63.
509 - 649 149 39 3/89 DP5PENG14 58. 62. 63.
509 - 789 289 39 3/89 DP5PENG28 73. 78. 85.
579 - 649 79 39 3/89 DP5PENG08 54. 58. 63.
579 - 789 219 39 3/89 DP5PENG22 62. 65. 67.
649 - 789 149 39 3/89 DP5PENG14 58. 62. 63.
* Lower Transition Cap is included with the products on this page.
h* = Nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
High-Low Panel End
1. Pattern Number2. Trim Finish
Order Code
High-Low Panel End
Example: DP5PEGG42H 117
DP5PE Pattern Number
GG Configuration
42 Height
117 Soft Grey
Included with:
High-Low Panel End
• Panel end cover• Connecting hardware
Options
Panel End, High-Low Panel Endand Top Caps
Trim options
Dividends Horizon
105
Pos
tC
onne
ctor
s/E
ndTr
im
Panel End Trim and Panel Top CapsThin Profile Panel End Trim and High-Low Panel End
description type h* w d pattern no. P1 P2 P3
Thin Profile Panel End 28 1/29 28 1/29 39 5/89 DP6PEWH $135. $135. $135.
28 1/29 + 149 42 1/29 39 5/89 DP6PEWHS14 161. 176. 184.
28 1/29 + 219 49 1/29 39 5/89 DP6PEWHS21 173. 190. 198.
28 1/29 + 289 56 1/29 39 5/89 DP6PEWHS28 186. 204. 210.
369 369 39 5/89 DP6PE36F 135. 135. 135.
429 429 39 5/89 DP6PE42 147. 147. 147.
509 509 39 5/89 DP6PE50 163. 163. 163.
579 579 39 5/89 DP6PE57 176. 176. 176.
649 649 39 5/89 DP6PE64 190. 190. 190.
789 789 39 5/89 DP6PE78 223. 223. 223.
Thin Profile Panel EndHigh-Low
28 1/29-369 369 39 5/89 DP6PEWH36 98. 106. 109.
28 1/29-429 429 39 5/89 DP6PEWH42 108. 119. 122.
28 1/29-509 509 39 5/89 DP6PEWH50 119. 132. 136.
28 1/29-579 579 39 5/89 DP6PEWH57 131. 145. 150.
28 1/29-649 649 39 5/89 DP6PEWH64 146. 162. 167.
28 1/29-789 789 39 5/89 DP6PEWH78 173. 193. 199.
369-429 69 39 5/89 DP6PE08 68. 70. 70.
369-509 149 39 5/89 DP6PE14 88. 94. 94.
369-579 219 39 5/89 DP6PE22 106. 110. 110.
369-649 289 39 5/89 DP6PE28 121. 129. 129.
369-789 429 39 5/89 DP6PE42H 150. 162. 162.
429-509 89 39 5/89 DP6PE08 68. 70. 70.
429-579 159 39 5/89 DP6PE14 88. 94. 94.
429-649 229 39 5/89 DP6PE22 106. 110. 110.
429-789 369 39 5/89 DP6PE36 139. 146. 146.
509-579 79 39 5/89 DP6PE08 68. 70. 70.
509-649 149 39 5/89 DP6PE14 88. 94. 94.
509-789 289 39 5/89 DP6PE28 121. 129. 129.
579-649 79 39 5/89 DP6PE08 68. 70. 70.
579-789 219 39 5/89 DP6PE22 106. 110. 110.
649-789 149 39 5/89 DP6PE14 88. 94. 94.
h* = Nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Thin Profile End Trim
1. Pattern Number2. Finish
Order Code
Thin Profile End Trim
Example: DP6PE42 117
DP Dividends Panel
6 Thin Profile
PE Panel End
42 Height
117 Finish
Included with:
Thin Panel End Trim
Attachment hardware
Note: Thin profile end trim is onlyavailable in Knoll core paintfinishes.
Options
Dividends Horizon
106
Panel End Trim and Panel Top CapsTopway and Full View Frame Top Caps
description w pattern no.Metal
P1Metal
P2Metal
P3 Veneer
Panel Top Caps 159 DP( )PT15 $58. $62. $64. $119.
189 DP( )PT18 58. 62. 64. 132.
249 DP( )PT24 58. 62. 64. 151.
309 DP( )PT30 58. 62. 64. 172.
369 DP( )PT36 58. 62. 64. 193.
429 DP( )PT42 58. 62. 64. 215.
489 DP( )PT48 58. 62. 64. 245.
549 DP( )PT54 64. 66. 68. 272.
609 DP( )PT60 67. 69. 75. 307.
669 DP( )PT66 75. 80. 85. 334.
729 DP( )PT72 84. 89. 94. 354.
789 DP( )PT78 92. 98. 102. 374.
849 DP( )PT84 101. 105. 110. 394.
909 DP( )PT90 108. 113. 118. 419.
969 DP( )PT96 114. 123. 130. 442.
Ordering Information
Panel Top Cap
1. Pattern Number2. Trim Finish
Order Code
Panel Top Cap
Example: DP5PT18, 117
DP5PT18 Pattern number
117 Soft Grey trim finish
Included with:
Panel Top Cap
• Panel Top Cap
Options
Panel Top Caps
Trim options(4) = Radius Metal(5) = Flat Metal(V4) = Radius Veneer(V5) = Flat Veneer
Dividends Horizon
107
Pos
tC
onne
ctor
s/E
ndTr
im
Panel End Trim and Panel Top CapsShortened Panel Top Caps
description w pattern no.Metal
P1Metal
P2Metal
P3 Veneer
Shortened Panel Top Caps (for lower panel onhigh-low panel to panel application) Not for usewith DP6 Thin profile panel ends
149 DP( )PT14 $58. $62. $64. $119.
179 DP( )PT17 58. 62. 64. 132.
239 DP( )PT23 58. 62. 64. 151.
299 DP( )PT29 58. 62. 64. 172.
359 DP( )PT35 58. 62. 64. 193.
419 DP( )PT41 58. 62. 64. 215.
479 DP( )PT47 58. 62. 64. 245.
539 DP( )PT53 64. 66. 68. 272.
599 DP( )PT59 67. 69. 75. 307.
659 DP( )PT65 75. 80. 85. 334.
719 DP( )PT71 84. 89. 94. 354.
779 DP( )PT77 92. 98. 102. 374.
839 DP( )PT83 101. 105. 110. 394.
899 DP( )PT89 108. 113. 118. 419.
959 DP( )PT95 114. 123. 130. 442.
h* = Nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Panel Top Cap
1. Pattern Number2. Trim Finish
Panel-to-Panel Top Cap Transition
1. Pattern Number2. Trim Finish
Order Code
Panel Top Cap
Example: DP5PT18, 117
DP5PT18 Pattern number
117 Soft Grey trim finish
Included with:
Panel Top Cap
• Panel Top Cap
Options
Panel Top Caps
Trim options(4) = Radius Metal(5) = Flat Metal
Dividends Horizon
108
Panel Wall Starter, Panel-to-Panel Top Cap Transitionand Off-Module Panel Connector
description type h * h w d pattern no.Single pack
list10 pack
list
Panel/Screen Wall Starter 149 13 1/59 29 3/49 DP3PWS14 $84. n/a
219 20 4/59 29 3/49 DP3PWS21 96. n/a
289 27 4/59 29 3/49 DP3PWS28 108. n/a
369 289 29 3/49 DP3PWS36 145. n/a
429 35 3/89 29 3/49 DP3PWS42 150. n/a
509 42 11/169 29 3/49 DP3PWS50 155. n/a
579 509 29 3/49 DP3PWS57 160. n/a
649 57 1/49 29 3/49 DP3PWS64 168. n/a
719 64 1/29 29 3/49 DP3PWS71 172. n/a
789 71 7/89 29 3/49 DP3PWS78 175. n/a
Panel-to-Panel Top Cap Transition 3/49 19 39 DP( ) TCT( ) 8. 88.
Off-Module Panel Connector 369 289 29 3/49 DP2PMS36 94. n/a
429 35 3/89 29 3/49 DP2PMS42 94. n/a
509 42 11/169 29 3/49 DP2PMS50 106. n/a
579 509 29 3/49 DP2PMS57 109. n/a
649 57 1/49 29 3/49 DP2PMS64 112. n/a
789 71 7/89 29 3/49 DP2PMS78 134. n/a
Radius Post Top Cap(for use with off-module panel connectorwhen radius metal top caps are used)
three-way 1/29 39 39 DP1PT3 6. n/a
four-way 1/29 39 39 DP1PT4 6. n/a
h* = nominal heightDimensions listed under h w d are actual to the nearest 1/169
Ordering Information
Panel Wall Starter
1. Pattern Number
Off-Module Panel Connector
1. Pattern Number
Panel-to-Panel Top Cap Transition
1. Pattern Number2. Trim Finish
Order Code
Panel Wall Starter
Example: DP1 PWS 64
DP1 PW64
Pattern Number
Off-Module Panel Connector
Example: DP1 PMS50
DP1PMS50
Pattern Number
Panel-to-Panel Top Cap Transition
Example: DP1 TCT, 117
DP1 TCT Pattern Number
117 Soft Grey
Included with:
Panel Wall Starter
Off-Module Panel Connector
Panel-to-Panel Top Cap Transition
Note: Three-way or four-way posttop cap must be ordered separatelywhen radius metal panel top capsare being used.
Options
Panel Wall Starter
Off-Module Panel Connector
Panel-to-Panel Top Cap Transition
Trim Option:(4) = Radius Metal(5) = Flat Metal(V4) = Radius Veneer(V5) = Flat Veneer
Panel-to-Panel Top Cap Transition
Add an ’SP’ suffix to the basepattern number for single pack or’TP’ suffix for a 10 pack.
Dividends Horizon
109
Pos
tC
onne
ctor
s/E
ndTr
im
Wall Mount Tracks and Components579, 649, 719 and 789 High
description w h d pattern no. NA Black P1 P2 P3
Wall Mount Tracks (pair) 1 1/29 579 1 1/29 DP1WT57 $322. $322. $355. $371.
1 1/29 649 1 1/29 DP1WT64 336. 336. 371. 383.
1 1/29 719 1 1/29 DP1WT71 349. 349. 383. 402.
1 1/29 789 1 1/29 DP1WT78 361. 361. 400. 413.
End Trim for Wall Mount Tracks 1 1/29 579 5/89 DP1WTET57 n/a 118. 129. 134.
1 1/29 649 5/89 DP1WTET64 n/a 129. 145. 150.
1 1/29 719 5/89 DP1WTET71 n/a 129. 145. 150.
1 1/29 789 5/89 DP1WTET78 n/a 129. 145. 150.
Top Cap for Wall Mount Tracks 159 3/49 1 1/29 DP1WTTC15 n/a 96. 106. 109.
189 3/49 1 1/29 DP1WTTC18 n/a 102. 109. 113.
249 3/49 1 1/29 DP1WTTC24 n/a 106. 114. 119.
309 3/49 1 1/29 DP1WTTC30 n/a 117. 125. 133.
369 3/49 1 1/29 DP1WTTC36 n/a 132. 146. 151.
429 3/49 1 1/29 DP1WTTC42 n/a 145. 156. 164.
489 3/49 1 1/29 DP1WTTC48 n/a 145. 156. 164.
549 3/49 1 1/29 DP1WTTC54 n/a 169. 188. 195.
609 3/49 1 1/29 DP1WTTC60 n/a 171. 189. 196.
669 3/49 1 1/29 DP1WTTC66 n/a 171. 189. 196.
729 3/49 1 1/29 DP1WTTC72 n/a 171. 189. 196.
789 3/49 1 1/29 DP1WTTC78 n/a 180. 196. 205.
849 3/49 1 1/29 DP1WTTC84 n/a 242. 263. 273.
909 3/49 1 1/29 DP1WTTC90 n/a 248. 268. 281.
969 3/49 1 1/29 DP1WTTC96 n/a 253. 277. 290.
Bottom Tile Channel for Wall Mount Tracks 159 DP1WTBTC15 n/a 67. 72. 77.
189 DP1WTBTC18 n/a 68. 75. 80.
249 DP1WTBTC24 n/a 72. 84. 87.
309 DP1WTBTC30 n/a 77. 87. 89.
369 DP1WTBTC36 n/a 96. 106. 109.
429 DP1WTBTC42 n/a 108. 118. 121.
489 DP1WTBTC48 n/a 121. 135. 144.
Ordering Information
Wall Mount Tracks
1. Pattern Number2. Paint Finish
End Trim for Wall Mount Tracks
1. Pattern Number2. Paint Finish
Top Cap for Wall Mount Tracks
1. Pattern Number2. Paint Finish
Bottom Tile Channel for WallMount Tracks
1. Pattern Number2. Paint Finish
Tile Support Brackets
1. Pattern Number
Order Code
Wall Mount Tracks
Example: DP1WT57613
DP1WT57 Pattern Number
613 Paint Finish
Tile Support Brackets
Example: DP1WTTSB
DP1WTTSB
Pattern Number
Included with:
Wall Mount Tracks
Wall fasteners are not included orsupplied by Knoll.
Bottom Tile Channel for WallMount Tracks
• Hardware
Tile Support Brackets for WallMount Tracks
• Hardware
Options
Dividends Horizon
110
Wall Mount Tracks and Components579, 649, 719 and 789 High
description w h d pattern no. NA Black P1 P2 P3
Tile Support Brackets for Wall Mount Tracks(pair)
DP1WTTSB $13. n/a n/a n/a
Ordering Information
Wall Mount Tracks
1. Pattern Number2. Paint Finish
End Trim for Wall Mount Tracks
1. Pattern Number2. Paint Finish
Top Cap for Wall Mount Tracks
1. Pattern Number2. Paint Finish
Bottom Tile Channel for WallMount Tracks
1. Pattern Number2. Paint Finish
Tile Support Brackets
1. Pattern Number
Order Code
Wall Mount Tracks
Example: DP1WT57613
DP1WT57 Pattern Number
613 Paint Finish
Tile Support Brackets
Example: DP1WTTSB
DP1WTTSB
Pattern Number
Included with:
Wall Mount Tracks
Wall fasteners are not included orsupplied by Knoll.
Bottom Tile Channel for WallMount Tracks
• Hardware
Tile Support Brackets for WallMount Tracks
• Hardware
Options
Dividends Horizon
111
Pos
tC
onne
ctor
s/E
ndTr
im
Coat Hooks and Reveal FillersCarpet Grippers
description type h w d pattern no. list P1 P2 P3
Carpet Grippers Package of 10 DP1 CG $18.
Coat Hook(For Panel Slotted Standard)
Package of 10 DP2CHTP 210. 210. 210.
Coat Hook (For radius metal and plastic trimonly)(Package of 4)
Anodized Black Finish DP1 CHB 184.
Matte Aluminum Finish DP1 CHP 173.
Wide Panel Reveal Filler (for panel-to-panel,panel-to-DP2/4/5 end trim or between laminateinsterts)
15 Fillers 749 DP2PRFW15 ( ) 87.
Narrow Panel Reveal Filler (for panel-to-postattachment and panel-to-DP6 end tirm)
15 Fillers 749 DP2PRFN15 ( ) 66.
Corner Panel Reveal Filler (for inside corner ofDP8 post)
15 Fillers 749 DP2PRFIC15 251.
Ordering Information
Panel Rigidizer Bracket
1. Pattern Number
Panel Reveal Filler
1. Pattern Number
Slotted Standard Coat Hook
1. Pattern Number2. Paint Finish
Order Code
Panel Rigidizer Bracket
Example: DP1 PRBL
Panel Reveal Filler
Example: DP1PRF N15
Slotted Standard Coat Hook
Example: DP2CH
118 Bright White
Included with:
Panel Rigidizer Bracket
• Rigidizer Bracket• Set Screws
Panel Reveal Filler
• Reveal Fillers (15 qty)
Options
Panel Rigidizer Bracket
Panel Reveal Filler
Note: Two narrow panel revealfillers are required for inside corneron DP2/4/5 posts. They are usedonly on the outside of DP8 posts.
Panel Reveal Option:(B) = Black(W) = White(G) = Grey
Dividends Horizon
112
Coat Hooks and Reveal FillersAccessories
description type w d h pattern no. list lam. V1 V2
Pencil drawer Drawer interior depth is 159 14 1/29 17 1/29 1 1/49 MM1-PD-( ) $443. $0. $0. $0.
Coathooks (10) MM2-CH 133. 0. 0. 0.
Stabilizer foot 29 139 149 MM1-SF-( ) 506. 0. 0. 0.
Carpet grips (10) Dividends Open Panel Carpet Grippper MM2-NCG 40. 0. 0. 0.
Morrison Panel only MM2-CG 41. 0. 0. 0.
Replacement grommets (10) Thick surface 39 39 1 3/49 MM1WG 183. 0. 0. 0.
Thin surface 39 39 1 1/49 MM1UG 183. 0. 0. 0.
Privacy screen alignment clips, set of 10 Corner MZ1-LS 63. 0. 0. 0.
Straight MZ1-SS 63. 0. 0. 0.
Sample Worksurface Dividends Horizon Post Formed 169 169 1 1/49 MSAMP1616 0. 151. 194. 402.
Order Code
Example: MM1-PD-612
MM1 Accessory
PD Height
612 Medium Grey
Specification Information
Specify paint finishes:
Pencil tray is molded plastic andavailable in black or clear.Black: NClear: C
Application Notes
Stabilizer foot attaches to connectortrack to stabilize panel runs.
Carpet grips snap under panelglides to prevent panel runs fromsliding. Glide rotates in carpet gripto permit leveling.Coathooks engagebelow the top cap at any point onthe vertical panel.
Pencil drawer secures underneath aworksurface.
Dividends Horizon
113
Pos
tC
onne
ctor
s/E
ndTr
im
Product Line CategoryApplication
(1)Plus Dimensions (2) Height (3) Width 1 (4) Handed (5)
Adjacent Panel (6)
Finish (7)Grain Direction (8)
Edgeband (9)
DP GP L R WH 16 R WH 118 ~ 118
DP= Dividend Panel GP= Gallery Panel L= Covered L R= Add 1 3/16 to the right side WH= Work surface height 16= 16" Wide R= Right Handed WH: WH Select Finish V= Vertical Select Edge Band
L= Add 1 3/16 to the left side 36= 36" Height 19= 19" Wide L= Left Handed 36: 36" H= Horizontal
N= No Added dimensions 42= 42" Height 20= 20" Wide 42: 42" or 36" ~ = Solid color lam
50= 50" Height 24= 24" Wide 50: 50", 42" or 36"
30= 30" Wide
36= 36" Wide
42= 42" Wide
48= 48" Wide
54= 54" Wide
60= 60" Wide
66= 66" Wide
72= 72" Wide
78= 78" Wide
84= 84" Wide
90= 90" Wide
96= 96" Wide
Covered L Specification
The Covered L Gallery Panel attaches directly
to the end of a Dividends Horizon Panel as
a return without the need for a Universal
Post. Covered L applications are specified
as either right or left handed and have a
maximum overall width of 99". Extension
can be added to create longer runs. Returns
can be added to enclose a space or provide
additional stability. All hardware is included.
Follow the steps below to complete a
Covered L Gallery Panel specification:
1. Application: Covered L (L).
2. Plus Dimension: In applications where
a Return is required, choose the plus
dimension: left, right or none (L, R or
N). L and R add 1 3/16" to the overall
width and preserves the on-module
width inside the workstation.
3. Height: Worksurface Height, 36" 42", 50"
4. Width: 16", 19", 20", 24", 30", 36", 42",
48", 54", 60", 66", 72", 78", 84", 90", 96"
Note: Widths above are the usable,
on-module dimension inside the
workstation, not overall dimension.
5. Handed: Choose either left or right
(L or R). handedness is determined
from the user’s perspective within
the workstation. See below.
Note: If a Plus Dimension is chosen (L or
R), the handedness must match (L or R).
6. Adjacent Panel Height: Choose
the height of the adjacent Dividends
Horizon (50, 42, 36 or WH).
Note: Hi Lo applications with WH
Dividends Panels are not supported.
7. Finish: Choose the appropriate
laminate or veneer finish.
8. Laminiate Grain Direction: Choose
vertical or horizontal grain direction (V
or H) or (~) for solid color laminate.
Note: No grain direction choice is
required for solid color lamiante.
Note: Woodgrain laminate is not available with
grain matching in Shared T and Extension/
Return Gallery Panel applications.
Note: See width limitations by finish option
as referenced on the Dividends Horizon
Gallery Panel Specification page.
9. Edgeband: Choose any standard
synthetic edge option.
Length of Run Restriction: No Covered L
Gallery Panel run can exceed 96" (usable),
including extensions without lateral support
for stability i.e. attaching to freestanding
storage or using a Gallery Panel Return.
W
W= Overall Width
Gallery Panel to Dividends
Horizon Panel Alignment
Covered L, Left Hand Covered L, Right Hand Covered L, Attachment
W1, Usable Width
W
W1
Universal Gallery PanelsSpecifications
Dividends Horizon
114
Product Line CategoryApplication
(1)Plus Dimensions (2) Height (3) Width 1 (4) Width 2 (5) Adjacent Panel (6) Finish (7)
Grain Direction (8)
Edgeband (9)
DP GP T R WH 16 16 WH 118 ~ 118
DP= Dividend Panel GP= Gallery Panel T= Covered T R= Add 1 3/16 to the right side WH= Work surface height 16= 16" Wide 16= 16" Wide WH: WH Select Finish V= Vertical Select Edge Band
L= Add 1 3/16 to the left side 36= 36" Height 19= 19" Wide 19= 19" Wide 36: 36" H= Horizontal
N= No Added dimensions 42= 42" Height 20= 20" Wide 20= 20" Wide 42: 42" or 36" ~ = Solid color lam
50= 50" Height 24= 24" Wide 24= 24" Wide 50: 50", 42" or 36"
30= 30" Wide 30= 30" Wide
36= 36" Wide 36= 36" Wide
42= 42" Wide 42= 42" Wide
48= 48" Wide 48= 48" Wide
54= 54" Wide 54= 54" Wide
60= 60" Wide 60= 60" Wide
66= 66" Wide 66= 66" Wide
72= 72" Wide 72= 72" Wide
78= 78" Wide 78= 78" Wide
Covered T Specification
The Covered T Gallery Panel attaches to the
end of a Dividends Horizon Panel run as a
dual return without the need for a universal
post. Covered T applications have widths
that are specified independently and cannot
exceed an overall width of 99". Extension
can be added to create longer runs. Returns
can be added to enclose a space or provide
additional stability. All hardware included.
Follow the steps below to complete a
Covered T Gallery Panel Specification:
1. Application: Covered T (T).
2. Plus Dimension: In applications where
a Return(s) are required, choose the plus
dimension: left, right, both or none (L,
R, B or N). L and R add 1 3/16" to the
left or right sides, B adds 1 3/16" to both
left and right sides and preserves the
on-module width inside the workstation.
3. Height: Worksurface Height, 36" 42", 50"
4. Width 1: 16", 19", 20", 24", 30", 36", 42",
48", 54", 60", 66", 72", 78", 84", 90", 96"
5. Width 2: 16", 19", 20", 24", 30", 36", 42",
48", 54", 60", 66", 72", 78", 84", 90", 96"
Note: Widths above are the usable,
on-module dimension inside the
workstation, not overall dimension.
Note: No combination of Width 1
and Width 2 can exceed 96".
6. Adjacent Panel Height: Choose
the height of the adjacent Dividends
Horizon (50, 42, 36 or WH).
Note: Hi Lo applications with WH
Dividends Panels are not supported.
7. Finish: Choose the appropriate
laminate or veneer finish.
8. Laminiate Grain Direction: Choose
vertical or horizontal grain direction (V
or H) or (~) for solid color laminate.
Note: See width limitations by finish option
as referenced on the Dividends Horizon
Gallery Panel Specification page.
9. Edgeband: Choose any standard
synthetic edge option.
Length of Run Restriction: No Covered T
Gallery Panel run can exceed 96" (usable),
including extensions without lateral support
for stability i.e. attaching to freestanding
storage or using a Gallery Panel Return.
W
COV T WITH OVERALL
W1
W2
COV T WITH W1 AND W2
Covered T: Combination of W1
and W2 not to exceed 96"Covered T AttachmentCovered T: Overall width not
to exceed 99"
50"H Covered T with 42"H
Adjacent Dividends Horizon Panel
Gallery Panel to Dividends
Horizon Panel Alignment
Universal Gallery PanelsSpecifications
Dividends Horizon
115
Alte
rnat
ive
Pla
nnin
g
Product Line CategoryApplication
(1)Plus Dimensions (2) Height (3) Width 1 (4) Width 2 (5) Adjacent Panel (6) Finish (7)
Grain Direction (8)
Edgeband (9)
DP GP S R WH 16 16 WH 118 ~ 118
DP= Dividend Panel GP= Gallery Panel S= Shared T R= Add 1 3/16 to the right side WH= Work surface height 16= 16" Wide 16= 16" Wide WH: WH Select Finish V= Vertical Select Edge Band
L= Add 1 3/16 to the left side 36= 36" Height 19= 19" Wide 19= 19" Wide 36: 36" H= Horizontal
N= No Added dimensions 42= 42" Height 20= 20" Wide 20= 20" Wide 42: 42" or 36" ~ = Solid color lam
50= 50" Height 24= 24" Wide 24= 24" Wide 50: 50", 42" or 36"
30= 30" Wide 30= 30" Wide
36= 36" Wide 36= 36" Wide
42= 42" Wide 42= 42" Wide
48= 48" Wide 48= 48" Wide
54= 54" Wide 54= 54" Wide
60= 60" Wide 60= 60" Wide
66= 66" Wide 66= 66" Wide
72= 72" Wide 72= 72" Wide
78= 78" Wide 78= 78" Wide
84= 84" Wide 84= 84" Wide
90= 90" Wide 90= 90" Wide
96= 96" Wide 96= 96" Wide
Shared T Specification
The Shared T Gallery Panel application attaches
to the end of a Dividends Horizon Panel run
and specified as an assembly of two gallery
panels without the need for a universal post.
Shared T applications have widths that are
specified independently up to 96" for greater
planning flexibility and where the joints bisects
the adjacent Dividends Horizon Panel. Extension
can be added to create longer runs. Returns
can be added to enclose a space or provide
additional stability. All hardware is included.
Follow the steps below to complete a
Shared T Gallery Panel specification:
1. Application: Shared T (S).
2. Plus Dimension: In applications where
a Return(s) are required, choose the plus
dimension: left, right, both or none (L,
R, B or N). L and R add 1 3/16" to the
left or right sides, B adds 1 3/16" to both
left and right sides and preserves the
on-module width inside the workstation.
3. Height: Worksurface Height, 36" 42", 50"
4. Width 1: 16", 19", 20", 24", 30", 36", 42",
48", 54", 60", 66", 72", 78", 84", 90", 96"
5. Width 2: 16", 19", 20", 24", 30", 36", 42",
48", 54", 60", 66", 72", 78", 84", 90", 96"
Note: Widths above are the usable,
on-module dimension inside the
workstation, not overall dimension.
6. Adjacent Panel Height: Choose
the height of the adjacent Dividends
Horizon (50, 42, 36 or WH)
Note: Hi Lo applications with WH
Dividends Panels are not supported.
7. Finish: Choose the appropriate
laminate or veneer finish.
8. Laminiate Grain Direction: Choose
vertical or horizontal grain direction (V
or H) or (~) for solid color laminate.
Note: See width limitations by finish option
as referenced on the Dividends Horizon
Gallery Panel Specification page.
9. Edgeband: Choose any standard
synthetic edge option.
Length of Run Restriction: No Shared T
Gallery Panel run can exceed 96" (usable),
including extensions without lateral support
for stability i.e. attaching to freestanding
storage or using a Gallery Panel Return.
W1
W2
COV T WITH W1 AND W2
W
50"H Shared T with 42"H Adjacent
Dividends Horizon Panel
Gallery Panel to Dividends
Horizon Panel alignment
Shared T: W1 or W2 can exceed 96"
Shared T Gallery Panel Connection
Universal Gallery PanelsSpecifications
Dividends Horizon
116
Product Line Category Application (1) Plus Dimensions (2) Height (3) Width 1 (4) Finish (5) Grain Direction (6) Edgeband (7)
DP GP E R WH 16 118 ~ 118
DP= Dividend Panel GP= Gallery Panel E= Extension R= Add 1 3/16 to the right side WH= Work surface height 16= 16" Wide Select Finish V= Vertical Select Edge Band
L= Add 1 3/16 to the left side 36= 36" Height 19= 19" Wide H= Horizontal
N= No Added dimensions 42= 42" Height 20= 20" Wide ~ = Solid color lam
50= 50" Height 24= 24" Wide
30= 30" Wide
36= 36" Wide
42= 42" Wide
48= 48" Wide
54= 54" Wide
60= 60" Wide
66= 66" Wide
72= 72" Wide
78= 78" Wide
Extension/ Return Specification
The Extension Gallery Panel application
attaches, in-line, to the end of an existing
gallery panel to add length to a run. Maximum
width is 78". All hardware is included.
The Return Gallery Panels application
attaches the face of an existing gallery
panel to add stability to a panel run or
privacy to a workstation. Maximum width
is 78". All hardware is included.
Note: Extensions and Returns are
identical except for where the attach
to an existing gallery panel.
Extension can be added to create longer
runs. Returns can be added to enclose
a space or provide additional stability.
Follow the steps below to complete an
Extension/ Return Gallery Panel Specification:
1. Application: Extension/ Return (E).
2. Plus Dimension: In applications where
a Return(s) are required, choose the plus
dimension: left, right, both or none (L,
R, B or N). L and R add 1 3/16" to the
left or right sides, B adds 1 3/16" to both
left and right sides and preserves the
on-module width inside the workstation.
3. Height: Worksurface Height, 36" 42", 50"
4. Width 1: 16", 19", 20", 24", 30", 36",
42", 48", 54", 60", 66", 72", 78"
5. Finish: Choose the appropriate
laminate or veneer finish.
6. Laminiate Grain Direction: Choose
vertical or horizontal grain direction (V
or H) or (~) for solid color laminate.
Note: See width limitations by finish option
as referenced on the Dividends Horizon
Gallery Panel Specification page.
7. Edgeband: Choose any standard
synthetic edge option.
Length of Run Restriction: No Shared T
Gallery Panel run can exceed 96" (usable),
including extensions without lateral support
for stability i.e. attaching to freestanding
storage or using a Gallery Panel Return.
EXTENSION
Covered T with an Extension Gallery Panel to
create a longer run
Attached storage or Return Gallery Panel for
stability on ALL runs that exceed 96"
Universal Gallery PanelsSpecifications
Dividends Horizon
117
Alte
rnat
ive
Pla
nnin
g
Product Line Category Application (1) Height (2) Width 1 (3) Finish (4) Grain Direction (5) Edgeband (6)
DP GP I WH 16 118 ~ 118
DP= Dividend Panel GP= Gallery Panel I= Intermediate WH= Work surface height 16= 16" Wide Select Finish V= Vertical Select Edge Band
36= 36" Height 19= 19" Wide H= Horizontal
42= 42" Height 20= 20" Wide ~ = Solid color lam
50= 50" Height 24= 24" Wide
30= 30" Wide
36= 36" Wide
42= 42" Wide
48= 48" Wide
54= 54" Wide
60= 60" Wide
66= 66" Wide
72= 72" Wide
78= 78" Wide
Intermediate Specification
The Intermediate Gallery Panel
application can be specified as either
Freestanding or Panel Mounted.
Freestanding Intermediate Gallery
Panels are specified as an off-module
divider between workstations and are
not connected to the Dividends Horizon
slotted standard. Maximum width is 78".
Extensions/ Returns cannot be added.
Dividends Horizon Freestanding Feet
(DPGPFF) are offered in pairs. Two
(2) pairs are required to complete the
assembly and are ordered separately.
Note: Freestanding Intermediate applications
are best suited for 42" and wider Gallery Panels.
Panel Mounted Intermediate Gallery Panels are
specified as a divider between workstations
and are connected to the Dividends Horizon
Panel slotted standard. Maximum width
is 78". Extensions/Returns cannot be
added to intermediate gallery panels.
Dividends Horizon Gallery Panel Brackets
(DPGPPB) are offered in pairs, either left or right
handed. One (1) pair is required to complete
the assembly and are ordered separately.
Note: Panel Mounted Intermediate applications
are best suited for 16"-36" wide Gallery Panels.
Follow the steps below to complete an
Extension/ Return Gallery Panel Specification:
1. Application: Intermediate (I).
2. Height: Worksurface Height, 36" 42", 50"
3. Width 1: 16", 19", 20", 24", 30", 36",
42", 48", 54", 60", 66", 72", 78"
Note: Widths above are the usable,
on-module dimension inside the
workstation, not overall dimension.
4. Finish: Choose the appropriate
laminate or veneer finish.
5. Laminate Grain Direction: Choose
vertical or horizontal grain direction (V
or H) or (~) for solid color laminate.
Note: See width limitations by finish option
as referenced on the Dividends Horizon
Gallery Panel Specification page.
6. Edgeband: Choose any standard
synthetic edge option.
Intermediate Gallery Panel with
Freestanding Feet
Gallery Panel, Freestanding Feet, DPGPFF
Left-Hand Panel Bracket
DPGPPBL
Right-Hand Panel Bracket
DPGPPBR
Intermediate Gallery Panel with
Left-Hand Panel Bracket
Intermediate Gallery Pabel with
Right-Hand Bracket
Universal Gallery PanelsSpecifications
Dividends Horizon
118
Product
LineCategory
Application
(1)
Plus
Dimensions
(2)
Height (3) Width 1 (4) Material (5) Finish (6) Frame Finish (7)
DP GPAU T 1 7 16 H TEMP 113T
DP=
Dividend
Panel
GPAU=
Gallery
Panel
Add Up
L= Covered N=No added
dimension
1=Add 1 3/16"
to the end
7=7" Height
14=14" Height
21=21" Height
16=16" Wide H=1/2" Glass
W=3/8" Glass
E=1/4" Glass
T=12mm PET
For H glass option:
(Temp)=Clear
(GL13)=Frosted
(GL25)=Bronze
(GL35)=Grey
For E glass option:
(Temp)=Clear
(GL13)=Frosted
For W glass option:
(Temp)=Clear
(GL60)=Laminated Powder
For T option:
(PET12SL)=Slate
(PET12PW)=Pewter
(PET12SM)=Smoke
(PET12OC)=Ochre
(PET12CB)=Cobalt
(611T)=Beige
Mist Metallic
(120T)=Black Brown
(118T)=Bright White
(112T)=Brown
(113T)=Dark Grey
(114T)=Folkstone Grey
(111T)=Jet Black
(115T)=Medium Grey
(612T)=Medium
Metallic Grey
(116T)=Sandstone
(613)=Silver
(117T)=Soft Grey
19=19" Wide
20=20" Wide
24=24" Wide
30=30" Wide
36=36" Wide
42=42" Wide
48=48" Wide
54=54" Wide
60=60" Wide
66=66" Wide
72=72" Wide
78=78" Wide
84=84" Wide
90=90" Wide
96=96" Wide
SCALE 0.250
Universal Gallery PanelsAdd Up Screens
Dividends Horizon
119
Alte
rnat
ive
Pla
nnin
g
Product
LineCategory
Application
(1)
Plus
Dimensions
(2)
Height (3) Width 1 (4) Width 2 (5) Material (6) Finish (7) Frame Finish (8)
DP GPAU T 1 7 16 60 H TEMP 113T
DP=
Dividend
Panel
GPAU=
Gallery
Panel
Add Up
T= Covered N=No added
dimension
1=Add 1 3/16"
to the end
7=7" Height
14=14" Height
21=21" Height
16=16" Wide 16=16" Wide H=1/2" Glass
W=3/8" Glass
E=1/4" Glass
T=12mm PET
For H glass option:
(Temp)=Clear
(GL13)=Frosted
(GL25)=Bronze
(GL35)=Grey
For E glass option:
(Temp)=Clear
(GL13)=Frosted
For W glass option:
(Temp)=Clear
(GL60)=Laminated
Powder
For T option:
(PET12SL)=Slate
(PET12PW)=Pewter
(PET12SM)=Smoke
(PET12OC)=Ochre
(PET12CB)=Cobalt
(611T)=Beige
Mist Metallic
(120T)=Black Brown
(118T)=Bright White
(112T)=Brown
(113T)=Dark Grey
(114T)=Folkstone Grey
(111T)=Jet Black
(115T)=Medium Grey
(612T)=Medium
Metallic Grey
(116T)=Sandstone
(613)=Silver
(117T)=Soft Grey
19=19" Wide 19=19" Wide
20=20" Wide 20=20" Wide
24=24" Wide 24=24" Wide
30=30" Wide 30=30" Wide
36=36" Wide 36=36" Wide
42=42" Wide 42=42" Wide
48=48" Wide 48=48" Wide
54=54" Wide 54=54" Wide
60=60" Wide 60=60" Wide
66=66" Wide 66=66" Wide
72=72" Wide 72=72" Wide
78=78" Wide 78=78" Wide
84=84" Wide 84=84" Wide
90=90" Wide 90=90" Wide
96=96" Wide 96=96" Wide
Universal Gallery PanelsAdd Up Screens
Dividends Horizon
120
Product
LineCategory
Application
(1)
Plus
Dimensions
(2)
Height (3) Width 1 (4) Material (5) Finish (6) Frame Finish (7)
DP GPAU T 1 7 16 H TEMP 113T
DP=
Dividend
Panel
GPAU=
Gallery
Panel
Add Up
S= Shared T N=No added
dimension
1=Add 1 3/16"
to the end
7=7" Height
14=14" Height
21=21" Height
16=16" Wide H=1/2" Glass
W=3/8" Glass
E=1/4" Glass
T=12mm PET
For H glass option:
(Temp)=Clear
(GL13)=Frosted
(GL25)=Bronze
(GL35)=Grey
For E glass option:
(Temp)=Clear
(GL13)=Frosted
For W glass option:
(Temp)=Clear
(GL60)=Laminated Powder
For T option:
(PET12SL)=Slate
(PET12PW)=Pewter
(PET12SM)=Smoke
(PET12OC)=Ochre
(PET12CB)=Cobalt
(611T)=Beige
Mist Metallic
(120T)=Black Brown
(118T)=Bright White
(112T)=Brown
(113T)=Dark Grey
(114T)=Folkstone Grey
(111T)=Jet Black
(115T)=Medium Grey
(612T)=Medium
Metallic Grey
(116T)=Sandstone
(613)=Silver
(117T)=Soft Grey
19=19" Wide
20=20" Wide
24=24" Wide
30=30" Wide
36=36" Wide
42=42" Wide
48=48" Wide
54=54" Wide
60=60" Wide
66=66" Wide
72=72" Wide
78=78" Wide
84=84" Wide
90=90" Wide
96=96" Wide
Universal Gallery PanelsAdd Up Screens
Dividends Horizon
121
Alte
rnat
ive
Pla
nnin
g
Product
LineCategory
Application
(1)
Plus
Dimensions
(2)
Height (3) Width 1 (4) Material (5) Finish (6) Frame Finish (7)
DP GPAU T 1 7 16 H TEMP 113T
DP=
Dividend
Panel
GPAU=
Gallery
Panel
Add Up
L= Covered N=No added
dimension
1=Add 1 3/16"
to the end
7=7" Height
14=14" Height
21=21" Height
16=16" Wide H=1/2" Glass
W=3/8" Glass
E=1/4" Glass
T=12mm PET
For H glass option:
(Temp)=Clear
(GL13)=Frosted
(GL25)=Bronze
(GL35)=Grey
For E glass option:
(Temp)=Clear
(GL13)=Frosted
For W glass option:
(Temp)=Clear
(GL60)=Laminated Powder
For T option:
(PET12SL)=Slate
(PET12PW)=Pewter
(PET12SM)=Smoke
(PET12OC)=Ochre
(PET12CB)=Cobalt
(611T)=Beige
Mist Metallic
(120T)=Black Brown
(118T)=Bright White
(112T)=Brown
(113T)=Dark Grey
(114T)=Folkstone Grey
(111T)=Jet Black
(115T)=Medium Grey
(612T)=Medium
Metallic Grey
(116T)=Sandstone
(613)=Silver
(117T)=Soft Grey
19=19" Wide
20=20" Wide
24=24" Wide
30=30" Wide
36=36" Wide
42=42" Wide
48=48" Wide
54=54" Wide
60=60" Wide
66=66" Wide
72=72" Wide
78=78" Wide
84=84" Wide
90=90" Wide
96=96" Wide
Extension
Return
Universal Gallery PanelsAdd Up Screens
Dividends Horizon
122
Product Line Category Application (1) Height (3) Width 1 (4) Material (5) Finish (6) Frame Finish (7)
DP GPAU i 7 16 H TEMP 113T
DP= Dividend
Panel
GPAU= Gallery
Panel Add Up
i=intermediate 7=7" Height
14=14" Height
21=21" Height
16=16" Wide H=1/2" Glass
W=3/8" Glass
E=1/4" Glass
T=12mm PET
For H glass option:
(Temp)=Clear
(GL13)=Frosted
(GL25)=Bronze
(GL35)=Grey
For E glass option:
(Temp)=Clear
(GL13)=Frosted
For W glass option:
(Temp)=Clear
(GL60)=Laminated Powder
For T option:
(PET12SL)=Slate
(PET12PW)=Pewter
(PET12SM)=Smoke
(PET12OC)=Ochre
(PET12CB)=Cobalt
(611T)=Beige
Mist Metallic
(120T)=Black Brown
(118T)=Bright White
(112T)=Brown
(113T)=Dark Grey
(114T)=Folkstone Grey
(111T)=Jet Black
(115T)=Medium Grey
(612T)=Medium
Metallic Grey
(116T)=Sandstone
(613)=Silver
(117T)=Soft Grey
19=19" Wide
20=20" Wide
24=24" Wide
30=30" Wide
36=36" Wide
42=42" Wide
48=48" Wide
54=54" Wide
60=60" Wide
66=66" Wide
72=72" Wide
78=78" Wide
84=84" Wide
90=90" Wide
96=96" Wide
Universal Gallery PanelsAdd Up Screens
Dividends Horizon
123
Alte
rnat
ive
Pla
nnin
g
Universal Gallery PanelsGallery PanelComponents
description w h d pattern no. list P1 P2 P3
Gallery PanelFreestanding Foot(Assembly - Single Foot)
49 39 59 DPGPFF $286. $295. $299.
Gallery PanelPanel Brackets (Pair)
19 39 DPGPPB(L/R) 78. 0. 0. 0.
Available in black only.
Gallery PanelCarpet Grippers(10 per pack)
3/499 1/899 3/49 DPGPCG 17. 0. 0. 0.
Available in black only.
Ordering Information
Concealed Post
1. Pattern Number2. Paint Finish Code
Concealed Post Top Caps
1. Pattern Number2. Paint Finish Code
Order Code
Concealed Post
Example: DP8PO42CPF
DP8PO42CPF
Pattern Number
Concealed Post Top Caps
Example: DP8PTCP5
DP8PTCP Pattern Number
5 Flat profile
613 Silver paint finish
Included with:
Concealed Post
• Tile to floor filler
Concealed Post Top Caps
Options:
Post Top Cap Option:
(4) = Radius Profile(5) = Flat Profile
Dividends Horizon
124
Universal Gallery PanelsAdd Up ScreenComponents
description type pattern no. Single 10 pack
Gallery PanelAdd Up Screen,Glass/PETAllignment Clips
For 1/29 Glass DP1AUACH $3. $35.
For 1/49 Glass DP1AUACE 3. 35.
For 3/89 Glass DP1AUACW 3. 35.
Ordering Information
Alignment Clips
1. Pattern Number2. Pack size
Order Code
Concealed Post
Example: DP1AUACES
DP1AUACE Pattern Number
S Flat profile
Options:
Alignment Clip
S = Single PackT = Ten Pack
Dividends Horizon
125
Alte
rnat
ive
Pla
nnin
g
Concealed PostPost ComponentsPost and Post Top Caps Assemblies
description w h d pattern no. P1 P2 P3
Concealed Post 39 28 1/29 39 DP8(C/V/U)POWHCPF $187. $187. $187.
39 369 39 DP8(C/V/U)PO36CPF 211. 211. 211.
39 429 39 DP8(C/V/U)PO42CPF 229. 229. 229.
39 509 39 DP8(C/V/U)PO50CPF 249. 249. 249.
39 579 39 DP8(C/V/U)PO57CPF 266. 266. 266.
39 649 39 DP8(C/V/U)PO64CPF 296. 296. 296.
Concealed Post Same HeightTop Caps
39 1/29 39 DP8(C/V/U)PTCP( ) 14. 18. 19.
Concealed Post High LowTop Caps
39 1/29 39 DP8(C/V/U)PTCPH( ) 14. 18. 19.
Concealed Post Same HeightTop Caps for RecessedAdd Up Glass
39 1/29 39 DP8CPTCPG5 14. 18. 19.
Concealed Post High LowTop Caps for RecessedAdd Up Glass
39 1/29 39 DP8CPTCPHG5 14. 18. 19.
Ordering Information
Concealed Post
1. Pattern Number2. Paint Finish Code
Concealed Post Top Caps
1. Pattern Number2. Paint Finish Code
Order Code
Concealed Post
Example: DP8PO42CPF
DP8PO42CPF
Pattern Number
U Panel Type
PO36CPF Pattern number
613 Silver Paint finish
Concealed Post Top Caps
Example: DP8PTCP5613
DP8PTCP Pattern Number
5 Flat profile
613 Silver paint finish
Included with:
Concealed Post
• Tile to floor filler
Concealed Post Top Caps
Options:
Concealed Post Option:C = Topway panelV = Full view panelU = Universal panel
Post Top Cap Option:(4) = Radius Profile(5) = Flat Profile
Dividends Horizon
126
Concealed PostPost ComponentsPanel Top Caps
description w h d pattern no. P1 P2 P3
Concealed PostPanel Top Caps
339 1/29 39 DP5(C/V/U)PT30CP $102. $111. $114.
399 1/29 39 DP5(C/V/U)PT36CP 103. 112. 117.
519 1/29 39 DP5(C/V/U)PT48CP 106. 113. 118.
639 1/29 39 DP5(C/V/U)PT60CP 107. 114. 119.
759 1/29 39 DP5(C/V/U)PT72CP 110. 118. 122.
879 1/29 39 DP5(C/V/U)PT84CP 112. 122. 125.
999 1/29 39 DP5(C/V/U)PT96CP 113. 123. 127.
Concealed PostShortened Panel Top Caps
329 1/29 39 DP5(C/V/U)PT29CP 102. 111. 114.
389 1/29 39 DP5(C/V/U)PT35CP 103. 112. 117.
509 1/29 39 DP5(C/V/U)PT47CP 106. 113. 118.
629 1/29 39 DP5(C/V/U)PT59CP 107. 114. 119.
749 1/29 39 DP5(C/V/U)PT71CP 110. 118. 122.
869 1/29 39 DP5(C/V/U)PT83CP 112. 122. 125.
989 1/29 39 DP5(C/V/U)PT95CP 113. 123. 127.
Ordering Information
Concealed Post Panel Top Caps
1. Pattern Number2. Paint Finish Code
Order Code
Concealed Post Panel Top Caps
Example: DP5PT48CP
DP5PT48CP
Pattern Number
117 Soft Grey paint finish
Included with:
Concealed Post Panel Top Caps
• Panel Top Caps
Options:
Trim Option:
(5) = Metal, Flat
Dividends Horizon
127
Alte
rnat
ive
Pla
nnin
g
Concealed PostMonolithic Panel Half Post Fabric InsertsWorksurface Height, 289 and 429 High
description w * w h d pattern no. 10 20 30 40
Worksurface Height Concealed PostMonolithic Panel Half PostFabric Inserts
159 16 1/29 27 1/49 7/169 DP1SOWH15( )F $162. $173. $183. $188.
189 19 1/29 27 1/49 7/169 DP1SOWH18( )F 183. 196. 202. 209.
249 25 1/29 27 1/49 7/169 DP1SOWH24( )F 199. 213. 224. 231.
309 31 1/29 27 1/49 7/169 DP1SOWH30( )F 217. 233. 244. 255.
369 37 1/29 27 1/49 7/169 DP1SOWH36( )F 234. 257. 267. 276.
429 43 1/29 27 1/49 7/169 DP1SOWH42( )F 255. 275. 286. 293.
489 49 1/29 27 1/49 7/169 DP1SOWH48( )F 274. 292. 307. 317.
609 61 1/29 27 1/49 7/169 DP1SOWH60( )F 286. 310. 328. 337.
289 High Concealed PostMonolithic Panel Half PostFabric Inserts(For 369H Panel Frame)
159 16 1/29 33 13/169 7/169 DP1SO2815( )F 163. 143. 150. 155.
189 19 1/29 33 13/169 7/169 DP1SO2818( )F 186. 176. 188. 193.
249 25 1/29 33 13/169 7/169 DP1SO2824( )F 209. 215. 227. 232.
309 31 1/29 33 13/169 7/169 DP1SO2830( )F 232. 251. 265. 274.
369 37 1/29 33 13/169 7/169 DP1SO2836( )F 257. 286. 300. 312.
429 43 1/29 33 13/169 7/169 DP1SO2842( )F 278. 328. 340. 350.
489 49 1/29 33 13/169 7/169 DP1SO2848( )F 300. 328. 342. 352.
609 61 1/29 33 13/169 7/169 DP1SO2860( )F 318. 345. 360. 372.
429 High Concealed PostMonolithic Panel Half PostFabric Inserts
159 16 1/29 41 3/169 7/169 DP1SO4215( )F 167. 184. 191. 199.
189 19 1/29 41 3/169 7/169 DP1SO4218( )F 198. 212. 223. 231.
249 25 1/29 41 3/169 7/169 DP1SO4224( )F 224. 242. 255. 263.
309 31 1/29 41 3/169 7/169 DP1SO4230( )F 251. 274. 283. 292.
369 37 1/29 41 3/169 7/169 DP1SO4236( )F 278. 300. 315. 329.
429 43 1/29 41 3/169 7/169 DP1SO4242( )F 304. 332. 345. 358.
489 49 1/29 41 3/169 7/169 DP1SO4248( )F 334. 360. 375. 388.
609 61 1/29 41 3/169 7/169 DP1SO4260( )F 354. 385. 402. 419.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/16
Ordering Information
Concealed Post Monolithic PanelFabric Inserts
1. Pattern Number2. Fabric
Order Code
Concealed Post Monolithic PanelFabric Inserts
Example: DP1SO2818CEF
DP1SO2818
Pattern Number
CE Center left, End Right
F Tile to Floor
W1077 Element
Included with:
Concealed Post Monolithic PanelFabric Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelFabric Inserts
Configuration:(CE) = Left Half Post: Tile ends inthe center of the post on the left andat the right side of the panel frame.(EC) = Right Half Post: Tile ends inthe center of the post on the rightand at the left side of the panelframe.
Dividends Horizon
128
Concealed PostMonolithic Panel Half Post Fabric Inserts509, 579 and 649 High
description w * w h d pattern no. 10 20 30 40
509 High Concealed PostMonolithic Panel Half PostFabric Inserts
159 16 1/29 48 1/29 7/169 DP1SO5015( )F $173. $186. $196. $202.
189 19 1/29 48 1/29 7/169 DP1SO5018( )F 207. 222. 231. 237.
249 25 1/29 48 1/29 7/169 DP1SO5024( )F 235. 260. 271. 277.
309 31 1/29 48 1/29 7/169 DP1SO5030( )F 272. 289. 303. 315.
369 37 1/29 48 1/29 7/169 DP1SO5036( )F 301. 328. 342. 352.
429 43 1/29 48 1/29 7/169 DP1SO5042( )F 334. 360. 377. 388.
489 49 1/29 48 1/29 7/169 DP1SO5048( )F 364. 396. 415. 429.
609 61 1/29 48 1/29 7/169 DP1SO5060( )F 394. 426. 440. 460.
579 High Concealed PostMonolithic Panel Half PostFabric Inserts
159 16 1/29 55 3/89 7/169 DP1SO5715( )F 180. 193. 201. 208.
189 19 1/29 55 3/89 7/169 DP1SO5718( )F 215. 232. 240. 251.
249 25 1/29 55 3/89 7/169 DP1SO5724( )F 255. 274. 283. 292.
309 31 1/29 55 3/89 7/169 DP1SO5730( )F 287. 312. 328. 338.
369 37 1/29 55 3/89 7/169 DP1SO5736( )F 328. 350. 364. 380.
429 43 1/29 55 3/89 7/169 DP1SO5742( )F 362. 388. 407. 425.
489 49 1/29 55 3/89 7/169 DP1SO5748( )F 399. 430. 448. 465.
609 61 1/29 55 3/89 7/169 DP1SO5760( )F 430. 464. 483. 499.
649 High Concealed PostMonolithic Panel Half PostFabric Inserts
159 16 1/29 63 1/169 7/169 DP1SO6415( )F 183. 196. 204. 209.
189 19 1/29 63 1/169 7/169 DP1SO6418( )F 223. 237. 251. 262.
249 25 1/29 63 1/169 7/169 DP1SO6424( )F 267. 284. 295. 307.
309 31 1/29 63 1/169 7/169 DP1SO6430( )F 304. 331. 345. 358.
369 37 1/29 63 1/169 7/169 DP1SO6436( )F 347. 374. 394. 406.
429 43 1/29 63 1/169 7/169 DP1SO6442( )F 388. 421. 438. 454.
489 49 1/29 63 1/169 7/169 DP1SO6448( )F 431. 465. 486. 504.
609 61 1/29 63 1/169 7/169 DP1SO6460( )F 468. 503. 529. 548.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/16
Ordering Information
Concealed Post Monolithic PanelFabric Inserts
1. Pattern Number2. Fabric
Order Code
Concealed Post Monolithic PanelFabric Inserts
Example: DP1SO5718CEF
DP1SO5718
Pattern Number
CE Center left, End Right
F Tile to Floor
W1077 Element
Included with:
Concealed Post Monolithic PanelFabric Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelFabric Inserts
Configuration:(CE) = Left Half Post: Tile ends inthe center of the post on the left andat the right side of the panel frame.(EC) = Right Half Post: Tile ends inthe center of the post on the rightand at the left side of the panelframe.
Dividends Horizon
129
Alte
rnat
ive
Pla
nnin
g
Concealed PostMonolithic Panel Half Post Laminate InsertsWorksurface Height, 289 and 429 High
description w * w h d pattern no. list
Worksurface Height Concealed PostMonolithic Panel Half PostLaminate Inserts
159 16 1/29 27 1/49 7/169 DP3L1WH15( )F $275.
189 19 1/29 27 1/49 7/169 DP3L1WH18( )F 314.
249 25 1/29 27 1/49 7/169 DP3L1WH24( )F 364.
309 31 1/29 27 1/49 7/169 DP3L1WH30( )F 396.
369 37 1/29 27 1/49 7/169 DP3L1WH36( )F 472.
429 43 1/29 27 1/49 7/169 DP3L1WH42( )F 480.
489 49 1/29 27 1/49 7/169 DP3L1WH48( )F 633.
289 High Concealed PostMonolithic Panel Half PostLaminate Inserts(For 369H Panel Frame)
159 16 1/29 33 13/169 7/169 DP3L12815( )F 275.
189 19 1/29 33 13/169 7/169 DP3L12818( )F 314.
249 25 1/29 33 13/169 7/169 DP3L12824( )F 364.
309 31 1/29 33 13/169 7/169 DP3L12830( )F 396.
369 37 1/29 33 13/169 7/169 DP3L12836( )F 472.
429 43 1/29 33 13/169 7/169 DP3L12842( )F 480.
489 49 1/29 33 13/169 7/169 DP3L12848( )F 633.
429 High Concealed PostMonolithic Panel Half PostLaminate Inserts
159 16 1/29 41 3/169 7/169 DP3L14215( )F 364.
189 19 1/29 41 3/169 7/169 DP3L14218( )F 407.
249 25 1/29 41 3/169 7/169 DP3L14224( )F 472.
309 31 1/29 41 3/169 7/169 DP3L14230( )F 638.
369 37 1/29 41 3/169 7/169 DP3L14236( )F 671.
429 43 1/29 41 3/169 7/169 DP3L14242( )F 678.
489 49 1/29 41 3/169 7/169 DP3L14248( )F 745.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelLaminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Concealed Post Monolithic PanelLaminate Inserts
Example: DP3L14236CEF
DP3L14236
Pattern Number
CE Center left, End Right
F Tile to Floor
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Concealed Post Monolithic PanelLaminate Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelLaminate InsertsConfiguration:(CE) = Left Half Post: Tile ends inthe center of the post on the left andat the right side of the panel frame.(EC) = Right Half Post: Tile ends inthe center of the post on the rightand at the left side of the panelframe.
Dividends Horizon
130
Concealed PostMonolithic Panel Half Post Laminate Inserts509 and 579 High
description w * w h d pattern no. list
509 High Concealed PostMonolithic Panel Half PostLaminate Inserts
159 16 1/29 48 1/29 7/169 DP3L15015( )F $397.
189 19 1/29 48 1/29 7/169 DP3L15018( )F 474.
249 25 1/29 48 1/29 7/169 DP3L15024( )F 595.
309 31 1/29 48 1/29 7/169 DP3L15030( )F 646.
369 37 1/29 48 1/29 7/169 DP3L15036( )F 790.
429 43 1/29 48 1/29 7/169 DP3L15042( )F 798.
489 49 1/29 48 1/29 7/169 DP3L15048( )F 1,029.
579 High Concealed PostMonolithic Panel Half PostLaminate Inserts
159 16 1/29 55 3/89 7/169 DP3L15715( )F 405.
189 19 1/29 55 3/89 7/169 DP3L15718( )F 482.
249 25 1/29 55 3/89 7/169 DP3L15724( )F 604.
309 31 1/29 55 3/89 7/169 DP3L15730( )F 655.
369 37 1/29 55 3/89 7/169 DP3L15736( )F 799.
429 43 1/29 55 3/89 7/169 DP3L15742( )F 804.
489 49 1/29 55 3/89 7/169 DP3L15748( )F 1,036.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelLaminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Concealed Post Monolithic PanelLaminate Inserts
Example: DP3L15736CEF
DP3L15736
Pattern Number
CE Center left, End Right
F Tile to Floor
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Concealed Post Monolithic PanelLaminate Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelFabric InsertsConfiguration:(CE) = Left Half Post: Tile ends inthe center of the post on the left andat the right side of the panel frame.(EC) = Right Half Post: Tile ends inthe center of the post on the rightand at the left side of the panelframe.
Dividends Horizon
131
Alte
rnat
ive
Pla
nnin
g
Concealed PostMonolithic Panel Centered Fabric InsertsWorksurface Height, 289 and 429 High
description w * w d h pattern no. 10 20 30 40
Worksurface Height Concealed PostMonolithic Panel Centered Fabric Insert
159 189 7/169 27 1/49 DP1SOWH15CCF $227. $244. $260. $267.
189 219 7/169 27 1/49 DP1SOWH18CCF 232. 255. 267. 275.
249 279 7/169 27 1/49 DP1SOWH24CCF 240. 262. 274. 281.
309 339 7/169 27 1/49 DP1SOWH30CCF 246. 271. 279. 289.
369 399 7/169 27 1/49 DP1SOWH36CCF 257. 277. 287. 299.
429 459 7/169 27 1/49 DP1SOWH42CCF 265. 283. 293. 307.
489 519 7/169 27 1/49 DP1SOWH48CCF 272. 290. 303. 316.
609 639 7/169 27 1/49 DP1SOWH60CCF 284. 307. 322. 334.
289 High Concealed PostMonolithic Panel Centered Fabric Insert(For 369H Panel Frame)
159 189 7/169 33 13/169 DP1SO2815CCF 242. 267. 277. 284.
189 219 7/169 33 13/169 DP1SO2818CCF 255. 276. 286. 293.
249 279 7/169 33 13/169 DP1SO2824CCF 263. 283. 295. 307.
309 339 7/169 33 13/169 DP1SO2830CCF 274. 292. 307. 317.
369 399 7/169 33 13/169 DP1SO2836CCF 281. 303. 317. 330.
429 459 7/169 33 13/169 DP1SO2842CCF 289. 314. 330. 342.
489 519 7/169 33 13/169 DP1SO2848CCF 300. 322. 340. 350.
609 639 7/169 33 13/169 DP1SO2860CCF 317. 344. 359. 372.
429 High Concealed PostMonolithic Panel Centered Fabric Insert
159 189 7/169 41 3/169 DP1SO4215CCF 267. 284. 295. 307.
189 219 7/169 41 3/169 DP1SO4218CCF 277. 295. 312. 319.
249 279 7/169 41 3/169 DP1SO4224CCF 286. 312. 322. 337.
309 339 7/169 41 3/169 DP1SO4230CCF 299. 322. 338. 349.
369 399 7/169 41 3/169 DP1SO4236CCF 312. 337. 350. 362.
429 459 7/169 41 3/169 DP1SO4242CCF 319. 349. 362. 375.
489 519 7/169 41 3/169 DP1SO4248CCF 334. 360. 375. 388.
609 639 7/169 41 3/169 DP1SO4260CCF 354. 385. 402. 419.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelFabric Inserts
1. Pattern Number2. Fabric
Order Code
Concealed Post Monolithic PanelFabric Inserts
Example: DP1SO2818CCF
DP1SO2818
Pattern Number
CC Center Left, CenterRight
F Tile to Floor
W1077 Element
Included with:
Concealed Post Monolithic PanelFabric Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelFabric Inserts
Dividends Horizon
132
Concealed PostMonolithic Panel Centered Fabric Inserts509, 579 and 649 High
description w * w h d pattern no. 10 20 30 40
509 High Concealed PostMonolithic Panel Centered Fabric Insert
159 189 48 1/29 7/169 DP1SO5015CCF $286. $310. $319. $334.
189 219 48 1/29 7/169 DP1SO5018CCF 300. 322. 338. 349.
249 279 48 1/29 7/169 DP1SO5024CCF 314. 340. 352. 364.
309 339 48 1/29 7/169 DP1SO5030CCF 329. 352. 366. 381.
369 399 48 1/29 7/169 DP1SO5036CCF 342. 364. 383. 397.
429 459 48 1/29 7/169 DP1SO5042CCF 352. 381. 399. 415.
489 459 48 1/29 7/169 DP1SO5048CCF 364. 396. 415. 430.
609 639 48 1/29 7/169 DP1SO5060CCF 394. 426. 443. 462.
579 High Concealed PostMonolithic Panel Centered Fabric Insert
159 189 55 3/89 7/169 DP1SO5715CCF 303. 332. 345. 358.
189 219 55 3/89 7/169 DP1SO5718CCF 318. 349. 362. 375.
249 279 55 3/89 7/169 DP1SO5724CCF 338. 363. 381. 394.
309 339 55 3/89 7/169 DP1SO5730CCF 352. 381. 399. 409.
369 399 55 3/89 7/169 DP1SO5736CCF 366. 399. 416. 431.
429 459 55 3/89 7/169 DP1SO5742CCF 385. 415. 435. 447.
489 519 55 3/89 7/169 DP1SO5748CCF 400. 431. 449. 468.
609 639 55 3/89 7/169 DP1SO5760CCF 431. 465. 484. 503.
649 High Concealed PostMonolithic Panel Centered Fabric Insert
159 189 63 1/169 7/169 DP1SO6415CCF 331. 353. 367. 383.
189 219 63 1/169 7/169 DP1SO6418CCF 347. 372. 388. 403.
249 279 63 1/169 7/169 DP1SO6424CCF 363. 392. 407. 426.
309 339 63 1/169 7/169 DP1SO6430CCF 381. 408. 430. 443.
369 399 63 1/169 7/169 DP1SO6436CCF 399. 430. 448. 465.
429 459 63 1/169 7/169 DP1SO6442CCF 416. 447. 469. 484.
489 519 63 1/169 7/169 DP1SO6448CCF 433. 468. 487. 506.
609 639 63 1/169 7/169 DP1SO6460CCF 468. 504. 531. 549.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelFabric Inserts
1. Pattern Number2. Fabric
Order Code
Concealed Post Monolithic PanelFabric Inserts
Example: DP1SO5718CCF
DP1SO5718
Pattern Number
CC Center Left, CenterRight
F Tile to Floor
W1077 Element
Included with:
Concealed Post Monolithic PanelFabric Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelFabric Inserts
Dividends Horizon
133
Alte
rnat
ive
Pla
nnin
g
Concealed PostMonolithic Panel Centered Laminate InsertsWorksurface Height, 289 and 429 High
description w * w h d pattern no. list
Worksurface Height Concealed PostMonolithic Panel Centered Laminate Insert
159 189 27 1/49 7/169 DP3L1WH15CCF $275.
189 219 27 1/49 7/169 DP3L1WH18CCF 314.
249 279 27 1/49 7/169 DP3L1WH24CCF 364.
309 339 27 1/49 7/169 DP3L1WH30CCF 396.
369 399 27 1/49 7/169 DP3L1WH36CCF 472.
429 459 27 1/49 7/169 DP3L1WH42CCF 480.
489 519 27 1/49 7/169 DP3L1WH48CCF 633.
289 High Concealed PostMonolithic Panel Centered Laminate Insert(For 369H Panel Frame)
159 189 33 13/169 7/169 DP3L12815CCF 275.
189 219 33 13/169 7/169 DP3L12818CCF 314.
249 279 33 13/169 7/169 DP3L12824CCF 364.
309 339 33 13/169 7/169 DP3L12830CCF 396.
369 399 33 13/169 7/169 DP3L12836CCF 472.
429 459 33 13/169 7/169 DP3L12842CCF 480.
489 519 33 13/169 7/169 DP3L12848CCF 633.
429 High Concealed PostMonolithic Panel Centered Laminate Insert
159 189 41 3/169 7/169 DP3L14215CCF 364.
189 219 41 3/169 7/169 DP3L14218CCF 407.
249 279 41 3/169 7/169 DP3L14224CCF 472.
309 339 41 3/169 7/169 DP3L14230CCF 638.
369 399 41 3/169 7/169 DP3L14236CCF 671.
429 459 41 3/169 7/169 DP3L14242CCF 678.
489 519 41 3/169 7/169 DP3L14248CCF 745.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelLaminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Concealed Post Monolithic PanelLaminate Inserts
Example: DP3L14236CCF
DP3L14236
Pattern Number
CC Center Left, CenterRight
F Tile to Floor
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Concealed Post Monolithic PanelLaminate Inserts
• Attachment Clips
Options
Dividends Horizon
134
Concealed PostMonolithic Panel Centered Laminate Inserts509 and 579 High
description w * w h d pattern no. list
509 High Concealed PostMonolithic Panel Centered Laminate Insert
159 189 48 1/29 7/169 DP3L15015CCF $397.
189 219 48 1/29 7/169 DP3L15018CCF 474.
249 279 48 1/29 7/169 DP3L15024CCF 595.
309 339 48 1/29 7/169 DP3L15030CCF 646.
369 399 48 1/29 7/169 DP3L15036CCF 790.
429 459 48 1/29 7/169 DP3L15042CCF 798.
489 519 48 1/29 7/169 DP3L15048CCF 1,029.
579 High Concealed PostMonolithic Panel Centered Laminate Insert
159 189 55 3/89 7/169 DP3L15715CCF 405.
189 219 55 3/89 7/169 DP3L15718CCF 482.
249 279 55 3/89 7/169 DP3L15724CCF 604.
309 339 55 3/89 7/169 DP3L15730CCF 655.
369 399 55 3/89 7/169 DP3L15736CCF 799.
429 459 55 3/89 7/169 DP3L15742CCF 804.
489 519 55 3/89 7/169 DP3L15748CCF 1,036.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelLaminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Concealed Post Monolithic PanelLaminate Inserts
Example: DP3L15736CCF
DP3L15736
Pattern Number
CC Center Left, CenterRight
F Tile to Floor
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Concealed Post Monolithic PanelLaminate Inserts
• Attachment Clips
Options
Dividends Horizon
135
Alte
rnat
ive
Pla
nnin
g
Concealed PostMonolithic Panel Double with Post Fabric InsertsWorksurface Height, 289 and 429 High
description w * w h d pattern no. 10 20 30 40
Worksurface Height Concealed PostMonolithic Panel Double withPost Fabric Insert
309 339 27 1/49 7/169 DP1SOWH30EPEF $227. $244. $260. $265.
369 399 27 1/49 7/169 DP1SOWH36EPEF 251. 274. 283. 290.
489 519 27 1/49 7/169 DP1SOWH48EPEF 276. 295. 312. 319.
609 639 27 1/49 7/169 DP1SOWH60EPEF 300. 328. 340. 350.
289 High Concealed PostMonolithic Panel Double withPost Fabric Insert(For 369h panel frame)
309 339 33 13/169 7/169 DP1SO2830EPEF 176. 191. 201. 207.
369 399 33 13/169 7/169 DP1SO2836EPEF 240. 262. 274. 279.
489 519 33 13/169 7/169 DP1SO2848EPEF 301. 329. 343. 353.
609 639 33 13/169 7/169 DP1SO2860EPEF 364. 396. 415. 429.
429 High Concealed PostMonolithic Panel Double withPost Fabric Insert
309 339 41 3/169 7/169 DP1SO4230EPEF 222. 237. 246. 260.
369 399 41 3/169 7/169 DP1SO4236EPEF 279. 301. 315. 329.
489 519 41 3/169 7/169 DP1SO4248EPEF 340. 364. 381. 396.
609 639 41 3/169 7/169 DP1SO4260EPEF 399. 430. 447. 465.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelFabric Inserts
1. Pattern Number2. Fabric
Order Code
Concealed Post Monolithic PanelFabric Inserts
Example: DP1SO2836EPEF
DP1SO2836
Pattern Number
EPE End, Post, End
F Tile to Floor
W1077 Element
Included with:
Concealed Post Monolithic PanelFabric Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelFabric Inserts
Dividends Horizon
136
Concealed PostMonolithic Panel Double with Post Fabric Inserts509, 579 and 649 High
description w * w h d pattern no. 10 20 30 40
509 High Concealed PostMonolithic Panel Double withPost Fabric Insert
309 339 48 /129 7/169 DP1SO5030EPEF $263. $279. $292. $304.
369 399 48 1/29 7/169 DP1SO5036EPEF 316. 342. 358. 371.
489 519 48 1/29 7/169 DP1SO5048EPEF 371. 400. 420. 435.
609 639 48 1/29 7/169 DP1SO5060EPEF 428. 462. 482. 497.
579 High Concealed PostMonolithic Panel Double withPost Fabric Insert
309 339 55 3/89 7/169 DP1SO5730EPEF 301. 329. 343. 353.
369 399 55 3/89 7/169 DP1SO5736EPEF 353. 381. 400. 415.
489 519 55 3/89 7/169 DP1SO5748EPEF 403. 436. 457. 472.
609 519 55 3/89 7/169 DP1SO5760EPEF 454. 488. 518. 534.
649 High Concealed PostMonolithic Panel Double withPost Fabric Insert
309 339 63 1/169 7/169 DP1SO6430EPEF 385. 416. 435. 448.
369 399 63 1/169 7/169 DP1SO6436EPEF 408. 443. 465. 481.
489 519 63 1/169 7/169 DP1SO6448EPEF 436. 472. 493. 509.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelFabric Inserts
1. Pattern Number2. Fabric
Order Code
Concealed Post Monolithic PanelFabric Inserts
Example: DP1SO5736EPEF
DP1SO5736
Pattern Number
EPE End, Post, End
F Tile to Floor
W1077 Element
Included with:
Concealed Post Monolithic PanelFabric Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelFabric Inserts
Dividends Horizon
137
Alte
rnat
ive
Pla
nnin
g
Concealed PostMonolithic Panel Double with Post Laminate InsertsWorksurface Height, 289 and 429 High
description w * w h d pattern no. list
Worksurface Height Concealed PostMonolithic Panel Double withPost Laminate Insert
309 339 27 1/49 7/169 DP3L1WH30EPEF $396.
369 399 27 1/49 7/169 DP3L1WH36EPEF 472.
489 519 27 1/49 7/169 DP3L1WH48EPEF 484.
609 639 27 1/49 7/169 DP3L1WH60EPEF 637.
729 759 27 1/49 7/169 DP3L1WH72EPEF 651.
849 879 27 1/49 7/169 DP3L1WH84EPEF 663.
289 High Concealed PostMonolithic Panel Double withPost Laminate Insert(For 369h panel frame)
309 339 33 13/169 7/169 DP3L12830EPEF 590.
369 399 33 13/169 7/169 DP3L12836EPEF 597.
489 519 33 13/169 7/169 DP3L12848EPEF 633.
609 639 33 13/169 7/169 DP3L12860EPEF 1,025.
729 759 33 13/169 7/169 DP3L12872EPEF 1,038.
849 879 33 13/169 7/169 DP3L12884EPEF 1,053.
429 High Concealed PostMonolithic Panel Double withPost Laminate Insert
309 339 41 3/169 7/169 DP3L14230EPEF 638.
369 399 41 3/169 7/169 DP3L14236EPEF 671.
489 519 41 3/169 7/169 DP3L14248EPEF 699.
609 639 41 3/169 7/169 DP3L14260EPEF 1,034.
729 759 41 3/169 7/169 DP3L14272EPEF 1,047.
849 879 41 3/169 7/169 DP3L14284EPEF 1,062.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelLaminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Concealed Post Monolithic PanelLaminate Inserts
Example: DP3L14236EPEF
DP3L14236
Pattern Number
EPE End, Post, End
F Tile to Floor
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Concealed Post Monolithic PanelLaminate Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelLaminate Inserts
Dividends Horizon
138
Concealed PostMonolithic Panel Double with Post Laminate Inserts509 and 579 High
description w * w h d pattern no. list
509 High Concealed PostMonolithic Panel Double withPost Laminate Insert
309 339 48 1/29 7/169 DP3L15030EPEF $646.
369 399 48 1/29 7/169 DP3L15036EPEF 790.
489 519 48 1/29 7/169 DP3L15048EPEF 1,029.
609 639 48 1/29 7/169 DP3L15060EPEF 1,043.
729 759 48 1/29 7/169 DP3L15072EPEF 1,057.
849 879 48 1/29 7/169 DP3L15084EPEF 1,070.
579 High Concealed PostMonolithic Panel Double withPost Laminate Insert
309 339 55 3/89 7/169 DP3L15730EPEF 655.
369 399 55 3/89 7/169 DP3L15736EPEF 799.
489 519 55 3/89 7/169 DP3L15748EPEF 1,036.
609 639 55 3/89 7/169 DP3L15760EPEF 1,051.
729 759 55 3/89 7/169 DP3L15772EPEF 1,063.
849 879 55 3/89 7/169 DP3L15784EPEF 1,076.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Concealed Post Monolithic PanelLaminate Inserts
1. Pattern Number2. Laminate Finish3. Edgeband Finish
Order Code
Concealed Post Monolithic PanelLaminate Inserts
Example: DP3L15736EPEF
DP3L15736
Pattern Number
EPE End, Post, End
F Tile to Floor
118 Bright White Laminate
118 Bright White Edgeband
Included with:
Concealed Post Monolithic PanelLaminate Inserts
• Attachment Clips
Options
Concealed Post Monolithic PanelLaminate Inserts
Dividends Horizon
139
Alte
rnat
ive
Pla
nnin
g
Concealed PostStandard Frameless Add Up1/29 Clear, Powder, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)
Frosted (GL13)Bronze (GL25)
Grey (GL35)
Frameless Add Up, 79 High(For use with concealed post only)
519 1/29 79 DP1AU0751( )G $642. $721.
579 1/29 79 DP1AU0757( )G 696. 782.
639 1/29 79 DP1AU0763( )G 747. 846.
699 1/29 79 DP1AU0769( )G 805. 908.
759 1/29 79 DP1AU0775( )G 858. 974.
819 1/29 79 DP1AU0781( )G 928. 1,058.
879 1/29 79 DP1AU0787( )G 1,005. 1,141.
939 1/29 79 DP1AU0793( )G 1,085. 1,236.
999 1/29 79 DP1AU0799( )G 1,170. 1,334.
Shortened Frameless Add Up, 79 High(For use with concealed post only)
509 1/29 79 DP1AU0750( )G 642. 721.
569 1/29 79 DP1AU0756( )G 696. 782.
629 1/29 79 DP1AU0762( )G 747. 846.
689 1/29 79 DP1AU0768( )G 805. 908.
749 1/29 79 DP1AU0774( )G 858. 974.
809 1/29 79 DP1AU0780( )G 928. 1,058.
869 1/29 79 DP1AU0786( )G 1,005. 1,141.
929 1/29 79 DP1AU0792( )G 1,085. 1,236.
989 1/29 79 DP1AU0798( )G 1,170. 1,334.
Ordering Information
Frameless Add Up with Glass
1. Pattern number2. Frame finish3. Glass finish
End Cap
1. Pattern number2. Paint finish
Order Code
Frameless Add Up with Glass
Example: DP1AU0757VG
DP1AU Frameless Add Up
07 79 High
57 579 Wide
V Glass
117 Frame finish
TEMP Clear glass finish
Included with:
Frameless Add Up with Glass
• Attachment hardware• Topway Trough Spacer (Topway
only)• Allignment Clip
Options
Frame Options:(V) = Full view(C) = Topway
Glass Options:(TEMP)= Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
140
Concealed PostStandard Frameless Add Up1/29 Clear, Powder, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)
Frosted (GL13)Bronze (GL25)
Grey (GL35)
Frameless Add Up, 149 High(For use with concealed post only)
519 1/29 149 DP1AU1451( )G $906. $1,065.
579 1/29 149 DP1AU1457( )G 991. 1,168.
639 1/29 149 DP1AU1463( )G 1,078. 1,275.
699 1/29 149 DP1AU1469( )G 1,161. 1,377.
759 1/29 149 DP1AU1475( )G 1,247. 1,482.
819 1/29 149 DP1AU1481( )G 1,354. 1,602.
879 1/29 149 DP1AU1487( )G 1,461. 1,734.
939 1/29 149 DP1AU1493( )G 1,577. 1,872.
999 1/29 149 DP1AU1499( )G 1,706. 2,022.
Shortened Frameless Add Up, 149 High(For use with concealed post only)
509 1/29 149 DP1AU1450( )G 906. 1,065.
569 1/29 149 DP1AU1456( )G 991. 1,168.
629 1/29 149 DP1AU1462( )G 1,078. 1,275.
689 1/29 149 DP1AU1468( )G 1,161. 1,377.
749 1/29 149 DP1AU1474( )G 1,247. 1,482.
809 1/29 149 DP1AU1480( )G 1,354. 1,602.
869 1/29 149 DP1AU1486( )G 1,461. 1,734.
929 1/29 149 DP1AU1492( )G 1,577. 1,872.
989 1/29 149 DP1AU1498( )G 1,706. 2,022.
End Cap DP1AUECTP 59.
Ordering Information
Frameless Add Up with Glass
1. Pattern number2. Frame finish3. Glass finish
End Cap
1. Pattern number2. Paint finish
Order Code
Frameless Add Up with Glass
Example: DP1AU0757VG
DP1AU Frameless Add Up
14 149 High
57 579 Wide
V Glass
117 Frame finish
TEMP Clear glass finish
Included with:
Frameless Add Up with Glass
• Attachment hardware• Topway Trough Spacer (Topway
only)• Allignment Clip
Options
Frame Option:(V) = Full view(C) = Topway
Glass Options:(TEMP)= Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
141
Alte
rnat
ive
Pla
nnin
g
Concealed PostRecessed Frameless Add Up1/29 Clear, Powder, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)Frosted(GL13)
Bronze (GL25)Grey (GL35)
Recessed Frameless Add Up, 79 High(For use with concealed post only)
519 1/29 79 DP1AR0751H( ) $614. $752. $870.
579 1/29 79 DP1AR0757H( ) 663. 815. 963.
639 1/29 79 DP1AR0763H( ) 713. 856. 1,021.
699 1/29 79 DP1AR0769H( ) 761. 927. 1,119.
759 1/29 79 DP1AR0775H( ) 802. 977. 1,196.
819 1/29 79 DP1AR0781H( ) 862. 1,024. 1,266.
879 1/29 79 DP1AR0787H( ) 915. 1,101. 1,355.
939 1/29 79 DP1AR0793H( ) 972. 1,183. 1,477.
999 1/29 79 DP1AR0799H( ) 1,126. 1,403. 1,443.
Recessed Shortened FramelessAdd Up, 79 High(For use with concealedpost only)
509 1/29 79 DP1AR0750H( ) 612. 752. 870.
569 1/29 79 DP1AR0756H( ) 661. 815. 963.
629 1/29 79 DP1AR0762H( ) 702. 856. 1,021.
689 1/29 79 DP1AR0768H( ) 758. 927. 1,119.
749 1/29 79 DP1AR0774H( ) 796. 977. 1,196.
809 1/29 79 DP1AR0780H( ) 859. 1,024. 1,266.
869 1/29 79 DP1AR0786H( ) 913. 1,101. 1,355.
929 1/29 79 DP1AR0792H( ) 968. 1,183. 1,477.
989 1/29 79 DP1AR0798H( ) 1,115. 1,456. 1,775.
Ordering Information
Frameless Add Up with Glass
1. Pattern number2. Frame finish3. Glass finish
End Cap
1. Pattern number2. Paint finish
Order Code
Frameless Add Up with Glass
Example: DP1AR0757H
DP1AR Frameless Add Up
07 79 High
57 579 Wide
H 1/29 Thick
117 Frame finish
TEMP Clear glass finish
Included with:
Frameless Add Up with Glass
• Attachment hardware• Topway Trough Spacer• Allignment Clip
Options
Glass Options:(TEMP)= Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
142
Concealed PostRecessed Frameless Add Up1/29 Clear, Powder, Bronze and Grey Glass
description w d h pattern no. listClear
(TEMP)
Frosted(GL13)
Bronze (GL25)Grey (GL35)
Bronze (GL25)Grey (GL35)
Recessed Frameless Add Up, 149 High(For use with concealed post only)
519 1/29 149 DP1AR1451H( ) $788. $963. $1,261.
579 1/29 149 DP1AR1457H( ) 862. 1,046. 1,376.
639 1/29 149 DP1AR1463H( ) 936. 1,111. 1,500.
699 1/29 149 DP1AR1469H( ) 1,009. 1,225. 1,640.
759 1/29 149 DP1AR1475H( ) 1,082. 1,308. 1,764.
819 1/29 149 DP1AR1481H( ) 1,178. 1,392. 1,877.
879 1/29 149 DP1AR1487H( ) 1,269. 1,539. 2,012.
939 1/29 149 DP1AR1493H( ) 1,372. 1,696. 2,176.
999 1/29 149 DP1AR1499H( ) 1,581. 1,847. 2,390.
Recessed Shortened FramelessAdd Up, 149 High(For use with concealedpost only)
509 1/29 149 DP1AR1450H( ) 788. 963. 1,261.
569 1/29 149 DP1AR1456H( ) 862. 1,046. 1,376.
629 1/29 149 DP1AR1462H( ) 936. 1,111. 1,500.
689 1/29 149 DP1AR1468H( ) 1,009. 1,225. 1,640.
749 1/29 149 DP1AR1474H( ) 1,082. 1,308. 1,764.
809 1/29 149 DP1AR1480H( ) 1,177. 1,392. 1,877.
869 1/29 149 DP1AR1486H( ) 1,269. 1,539. 2,012.
929 1/29 149 DP1AR1492H( ) 1,372. 1,696. 2,176.
989 1/29 149 DP1AR1498H( ) 1,582. 1,847. 2,390.
Ordering Information
Frameless Add Up with Glass
1. Pattern number2. Frame finish3. Glass finish
End Cap
1. Pattern number2. Paint finish
Order Code
Frameless Add Up with Glass
Example: DP1AR0757H
DP1AR Frameless Add Up
07 79 High
57 579 Wide
H 1/29 Thick
117 Frame finish
TEMP Clear glass finish
Included with:
Frameless Add Up with Glass
• Attachment hardware• Topway Trough Spacer (Topway
only)• Allignment Clip
Options
Glass Options:(TEMP)= Clear(GL13) = Frosted(GL25) = Bronze(GL35) = Grey
Dividends Horizon
143
Alte
rnat
ive
Pla
nnin
g
Concealed PostRecessed Frameless Add Up3/89 Clear and Laminated Frosted Glass
description w d h pattern no. listClear
(TEMP)
PowderLaminated
(GL60)
Recessed Frameless Add Up,79 high(For use with concealed post only)
519 3/89 79 DP1AR0751W( ) $552. $686.
579 3/89 79 DP1AR0757W( ) 597. 733.
639 3/89 79 DP1AR0763W( ) 641. 794.
699 3/89 79 DP1AR0769W( ) 686. 845.
759 3/89 79 DP1AR0775W( ) 721. 901.
819 3/49 79 DP1AR0781W( ) 776. 948.
879 3/49 79 DP1AR0787W( ) 825. 1,020.
939 3/49 79 DP1AR0793W( ) 877. 1,064.
999 3/49 79 DP1AR0799W( ) 915. 1,165.
Recessed Shortened FramelessAdd Up, 79 high(For use with concealed post only)
509 3/89 79 DP1AR0750W( ) 550. 686.
569 3/89 79 DP1AR0756W( ) 595. 733.
629 3/89 79 DP1AR0762W( ) 633. 794.
689 3/89 79 DP1AR0768W( ) 682. 845.
749 3/89 79 DP1AR0774W( ) 717. 880.
809 3/49 79 DP1AR0786W( ) 773. 948.
869 3/49 79 DP1AR0780W( ) 823. 1,020.
929 3/49 79 DP1AR0792W( ) 871. 1,064.
989 3/49 79 DP1AR0798W( ) 915. 1,114.
Ordering Information
Recessed Frameless Add Upwith Clear Glass
1. Pattern number2. Glass finish
Order Code
Frameless Add Up with Glass
Example: DP1AR0736W TEMP
DP1AR Frameless Add Up
07 79 High
36 369 Wide
W 3/89 Thick
TEMP Clear glass finish
Included with:
Recessed Frameless Add Upwith Clear Glass
• Attachment hardware• Allignment Clip
Options
Glass Options:(TEMP)= Clear(GL60) = Laminated Powder
Dividends Horizon
144
Concealed PostRecessed Frameless Add Up3/89 Clear and Laminated Frosted Glass
description w d h pattern no. listClear
(TEMP)
PowderLaminated
(GL60)
Recessed Frameless Add Up,149 high(For use with concealed post only)
519 3/89 149 DP1AR1451W( ) $710. $875.
579 3/89 149 DP1AR1457W( ) 776. 942.
639 3/89 149 DP1AR1463W( ) 843. 1,022.
699 3/89 149 DP1AR1469W( ) 908. 1,114.
759 3/89 149 DP1AR1475W( ) 975. 1,188.
819 3/89 149 DP1AR1481W( ) 1,060. 1,279.
879 3/89 149 DP1AR1487W( ) 1,143. 1,415.
939 3/89 149 DP1AR1493W( ) 1,235. 1,527.
999 3/89 149 DP1AR1499W( ) 1,335. 1,575.
Recessed Shortened FramelessAdd Up, 149 high(For use with concealed post only)
509 3/89 149 DP1AR1450W( ) 710. 875.
569 3/89 149 DP1AR1456W( ) 776. 942.
629 3/89 149 DP1AR1462W( ) 843. 1,022.
689 3/89 149 DP1AR1468W( ) 908. 1,114.
749 3/89 149 DP1AR1474W( ) 975. 1,188.
809 3/89 149 DP1AR1480W( ) 1,059. 1,279.
869 3/89 149 DP1AR1486W( ) 1,143. 1,415.
929 3/89 149 DP1AR1492W( ) 1,235. 1,527.
989 3/89 149 DP1AR1498W( ) 1,337. 1,577.
Ordering Information
Recessed Frameless Add Upwith Clear Glass
1. Pattern number2. Glass finish
Order Code
Frameless Add Up with Glass
Example: DP1AR0736W TEMP
DP1AR Frameless Add Up
07 79 High
36 369 Wide
W 3/89 Thick
TEMP Clear glass finish
Included with:
Recessed Frameless Add Upwith Clear Glass
• Attachment hardware• Allignment Clip
Options
Glass Options:(TEMP)= Clear(GL60) = Laminated Powder
Dividends Horizon
145
Alte
rnat
ive
Pla
nnin
g
Concealed PostRecessed Frameless Add Up1/49 Clear and Powder Glass
description w d h pattern no. listClear
(TEMP)Frosted(GL13)
Recessed Frameless Add Up,79 high(For use with concealed post only)
519 1/49 79 DP1AR0751E( ) $470. $583.
579 1/49 79 DP1AR0757E( ) 508. 624.
639 1/49 79 DP1AR0763E( ) 546. 674.
699 1/49 79 DP1AR0769E( ) 583. 718.
759 1/49 79 DP1AR0775E( ) 613. 765.
819 1/49 79 DP1AR0781E( ) 659. 806.
879 1/49 79 DP1AR0787E( ) 701. 868.
939 1/49 79 DP1AR0793E( ) 745. 904.
999 1/49 79 DP1AR0799E( ) 779. 1,012.
Recessed Shortened FramelessAdd Up, 79 high(For use with concealed post only)
509 1/49 79 DP1AR0750E( ) 469. 583.
569 1/49 79 DP1AR0756E( ) 507. 624.
629 1/49 79 DP1AR0762E( ) 537. 674.
689 1/49 79 DP1AR0768E( ) 581. 718.
749 1/49 79 DP1AR0774E( ) 609. 783.
809 1/49 79 DP1AR0780E( ) 657. 806.
869 1/49 79 DP1AR0786E( ) 700. 868.
929 1/49 79 DP1AR0792E( ) 741. 904.
989 1/49 79 DP1AR0798E( ) 779. 946.
Ordering Information
Frameless Add Up with Glass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Up withGlass
Example: DP1AR0736E TEMP
DP1AR Frameless Add Up
07 79 High
36 369 Wide
E 1/49 Thick
117 Frame finish
TEMP Clear glass finish
Included with:
Recessed Frameless Add Up withClear Glass
• Attachment hardware• Allignment Clip
Options
Glass Options:(TEMP)= Clear(GL13) = Frosted
Dividends Horizon
146
Concealed PostRecessed Frameless Add Up1/49 Clear and Powder Glass
description w d h pattern no. listClear
(TEMP)Frosted(GL13)
Recessed Frameless Add Up,149 high(For use with concealed post only)
519 1/49 149 DP1AR1451E( ) $603. $744.
579 1/49 149 DP1AR1457E( ) 659. 800.
639 1/49 149 DP1AR1463E( ) 716. 869.
699 1/49 149 DP1AR1469E( ) 772. 946.
759 1/49 149 DP1AR1475E( ) 828. 1,010.
819 1/49 149 DP1AR1481E( ) 901. 1,086.
879 1/49 149 DP1AR1487E( ) 971. 1,202.
939 1/49 149 DP1AR1493E( ) 1,051. 1,297.
999 1/49 149 DP1AR1499E( ) 1,135. 1,339.
Recessed Shortened FramelessAdd Up, 149 high(For use with concealed post only)
509 1/49 149 DP1AR1450E( ) 603. 744.
569 1/49 149 DP1AR1456E( ) 659. 800.
629 1/49 149 DP1AR1462E( ) 716. 869.
689 1/49 149 DP1AR1468E( ) 772. 946.
749 1/49 149 DP1AR1474E( ) 828. 1,010.
809 1/49 149 DP1AR1480E( ) 900. 1,086.
869 1/49 149 DP1AR1486E( ) 971. 1,202.
929 1/49 149 DP1AR1492E( ) 1,051. 1,297.
989 1/49 149 DP1AR1498E( ) 1,135. 1,341.
Ordering Information
Frameless Add Up with Glass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Up withGlass
Example: DP1AR0736E TEMP
DP1AR Frameless Add Up
07 79 High
36 369 Wide
E 1/49 Thick
117 Frame finish
TEMP Clear glass finish
Included with:
Recessed Frameless Add Up withClear Glass
• Attachment hardware• Allignment Clip
Options
Glass Options:(TEMP)= Clear(GL13) = Frosted
Dividends Horizon
147
Alte
rnat
ive
Pla
nnin
g
Concealed PostRecessed Frameless Add Up1/49 Clear and Powder Glass
description w d h pattern no. listClear
(TEMP)Frosted(GL13)
Recessed Frameless Add Up,219 high(For use with concealed post only)
519 1/49 219 DP1AR2151E( ) $811. $1,000.
579 1/49 219 DP1AR2157E( ) 886. 1,075.
639 1/49 219 DP1AR2163E( ) 963. 1,168.
699 1/49 219 DP1AR2169E( ) 1,037. 1,272.
759 1/49 219 DP1AR2175E( ) 1,113. 1,357.
819 1/49 219 DP1AR2181E( ) 1,211. 1,460.
879 1/49 219 DP1AR2187E( ) 1,306. 1,616.
939 1/49 219 DP1AR2193E( ) 1,412. 1,744.
999 1/49 219 DP1AR2199E( ) 1,526. 1,800.
Recessed Shortened FramelessAdd Up, 219 high(For use with concealed post only)
509 1/49 219 DP1AR2150E( ) 811. 1,000.
569 1/49 219 DP1AR2156E( ) 886. 1,075.
629 1/49 219 DP1AR2162E( ) 963. 1,168.
689 1/49 219 DP1AR2168E( ) 1,037. 1,272.
749 1/49 219 DP1AR2174E( ) 1,113. 1,357.
809 1/49 219 DP1AR2180E( ) 1,209. 1,460.
869 1/49 219 DP1AR2186E( ) 1,306. 1,616.
929 1/49 219 DP1AR2192E( ) 1,412. 1,744.
989 1/49 219 DP1AR2198E( ) 1,526. 1,802.
Ordering Information
Frameless Add Up with Glass
1. Pattern number2. Frame finish3. Glass finish
Order Code
Recessed Frameless Add Up withGlass
Example: DP1AR2151E 117TEMP
DP1AR Frameless Add Up
21 219 High
51 519 Wide
E 1/49 Thick
117 Frame finish
TEMP Clear glass finish
Included with:
Recessed Frameless Add Up withClear Glass
• Attachment hardware• Allignment Clip
Options
Glass Options:(TEMP)= Clear(GL13) = Frosted
Dividends Horizon
148
120° Planning120° Post Assemblies
description h* w d pattern no. BlackMetal
P1Metal
P2Metal
P3
120°Two-Way Post Assembly 369 39 39 DP8(C/V/U)120PA362( ) $406. $416. $430.
429 39 39 DP8(C/V/U)120PA422( ) 406. 416. 430.
509 39 39 DP8(C/V/U)120PA502( ) 422. 439. 450.
579 39 39 DP8(C/V/U)120PA572( ) 469. 484. 501.
649 39 39 DP8(C/V/U)120PA642( ) 469. 484. 501.
789 39 39 DP8(C/V/U)120PA782( ) 597. 624. 641.
120°Three-Way Post Assembly 369 39 39 DP8(C/V/U)120PA363( ) 414. 426. 439.
429 39 39 DP8(C/V/U)120PA423( ) 414. 426. 439.
509 39 39 DP8(C/V/U)120PA503( ) 430. 443. 458.
579 39 39 DP8(C/V/U)120PA573( ) 469. 484. 501.
649 39 39 DP8(C/V/U)120PA643( ) 469. 484. 501.
789 39 39 DP8(C/V/U)120PA783( ) 594. 616. 637.
120°Two-Way Post Assemblyfor Recessed Add Up Glass
369 39 39 DP8(C/V/U)120PAG362( ) 406. 416. 430.
429 39 39 DP8(C/V/U)120PAG422( ) 406. 416. 430.
509 39 39 DP8(C/V/U)120PAG502( ) 422. 439. 450.
579 39 39 DP8(C/V/U)120PAG572( ) 469. 484. 501.
649 39 39 DP8(C/V/U)120PAG642( ) 469. 484. 501.
789 39 39 DP8(C/V/U)120PAG782( ) 597. 624. 641.
120°Three-Way Post Assemblyfor Recessed Add Up Glass
369 39 39 DP8(C/V/U)120PAG363( ) 414. 426. 439.
429 39 39 DP8(C/V/U)120PAG423( ) 414. 426. 439.
509 39 39 DP8(C/V/U)120PAG503( ) 430. 443. 458.
579 39 39 DP8(C/V/U)120PAG573( ) 469. 484. 501.
649 39 39 DP8(C/V/U)120PAG643( ) 469. 484. 501.
789 39 39 DP8(C/V/U)120PAG783( ) 594. 616. 637.
h = nominal height
Ordering Information
Post Assemblies
1. Pattern Number2. Trim Finish
Order Code
Post Assemblies
Example: DP(4)120PA 642, 113
DP(4)120PA 642
Pattern Number
113 Dark grey trim finish
Included with:
Post Assemblies
• Post assemblies• Post top cap• Post cover• Connecting hardware
Options
Post assembly trim options(4) = Metal, Radius(5) = Metal, Flat
Dividends Horizon
149
Alte
rnat
ive
Pla
nnin
g
120° Planning120° Post Assemblies
description h* w d pattern no. BlackMetal
P1Metal
P2Metal
P3
149 High 120° Stack Panel Posts 14 5/89 39 39 DP8120SPO 14 $163.
219 High 120° Stack Panel Posts 21 15/169 39 39 DP8120SPO 21 184.
289 High 120° Stack Panel Posts 29 1/49 39 39 DP8120SPO 28 190.
h = nominal height
Ordering Information
Post Assemblies
1. Pattern Number2. Trim Finish
Order Code
Post Assemblies
Example: DP(4)120PA 642, 113
DP(4)120PA 642
Pattern Number
113 Dark grey trim finish
Included with:
Post Assemblies
• Post assemblies• Post top cap• Post cover• Connecting hardware
Options
Post assembly trim options(4) = Metal, Radius(5) = Metal, Flat
Dividends Horizon
150
120° Planning120° High Low Planning
description type h w d pattern no.Metal
P1Metal
P2Metal
P3
Post Covers (Straight) High-Low Connection 369 - 429 89 DP8120PC08S $12. $14. $14.
369 - 509 149 DP8120PC14S 22. 34. 37.
369 - 649 289 DP8120PC28S 58. 64. 65.
369 - 789 429 DP8120PC42SH 85. 92. 96.
429 - 509 89 DP8120PC08S 12. 14. 14.
429 - 649 229 DP8120PC22S 40. 41. 42.
429 - 789 369 DP8120PC36S 76. 84. 88.
509 - 649 149 DP8120PC14S 22. 34. 37.
509 - 789 289 DP8120PC28S 58. 64. 65.
649 - 789 149 DP8120PC14S 22. 34. 37.
Post Top Caps One-Way 1/29 39 39 DP8(C/V/U)120PT1 9. 10. 10.
Three-Way 1/29 39 39 DP8(C/V/U)120PT3 9. 10. 10.
Two-Way 1/29 39 39 DP8(C/V/U)120PT2 9. 10. 10.
Post Top Caps for Recessed Add Up Glass One-Way 1/29 39 39 DP8(C/V/U)120PTG1 9. 10. 10.
Three-Way 1/29 39 39 DP8(C/V/U)120PTG3 9. 10. 10.
Two-Way 1/29 39 39 DP8(C/V/U)120PTG2 9. 10. 10.
Post Covers (Straight) 369 DP8120PC36SF 66. 69. 77.
429 DP8120PC42S 66. 69. 77.
509 DP8120PC50S 67. 73. 78.
579 DP8120PC57S 77. 81. 86.
649 DP8120PC64S 77. 81. 86.
789 DP8120PC78S 86. 96. 99.
Universal Post (Post Only) 369 39 39 DP8120PO36 287.
429 39 39 DP8120PO42 287.
509 39 39 DP8120PO50 304.
579 39 39 DP8120PO57 328.
649 39 39 DP8120PO64 328.
789 39 39 DP8120PO78 442.
Ordering Information
Universal Post
1. Pattern Number
Panel Top Cap
1. Pattern Number2. Trim finish
Post Covers
1. Pattern Number2. Trim finish
Order Code
Universal Post
Example: DP2A P050
DP2AP050
Pattern Number
Panel Top Cap
Example: DPV1 PT4, V04
DPV1 PT4 Pattern Number
V04 Maple trim finish
Post Covers
Example: DP2A PC50S, 117
DP(2A)PC50S
Pattern Number
117 Soft grey trim finish
Included with:
Universal Post
Connecting hardware
Panel Top Cap
Post Covers
Options
120& Post
Panel Top Cap and Post Covers
(4) = Metal, Radius(5) = Metal, Flat
Dividends Horizon
151
Alte
rnat
ive
Pla
nnin
g
120° Planning120° Worksurface and Transition Tops
description top name wreturndepth d pattern no. 2 mm
woodgrainedge
metaledge
Worksurface W11L 489 189L-249R D1WW11481824 $1,566. $1,722. $1,879.
W11L 489 249L-189R D1WW11482418 1,566. 1,722. 1,879.
W12L 489 249 D1WW124824L 1,635. 1,805. 1,965.
W12R 489 249 D1WW124824R 1,635. 1,805. 1,965.
W1318L 489 249L-189R D1WW13482418 1,566. 1,722. 1,879.
W1318R 489 189L-249R D1WW13481824 1,566. 1,722. 1,879.
W13L 489 249 D1WW134824L 1,566. 1,722. 1,879.
W13R 489 249 D1WW134824R 1,566. 1,722. 1,879.
W218L 489 249L-189R D1WW12482418 1,635. 1,805. 1,965.
W218R 489 189L-249R D1WW12481824 1,635. 1,805. 1,965.
W3 489 249 D1WW34824 1,198. 1,312. 1,428.
W4 489 249 D1WW44824 1,227. 1,353. 1,473.
W5L 489 249 D1WW54824L 989. 1,089. 1,194.
W5R 489 249 D1WW54824R 989. 1,089. 1,194.
W6L 489 249 D1WW64824L 1,327. 1,461. 1,592.
W6R 489 249 D1WW64824R 1,327. 1,461. 1,592.
W7L 489 249 D1WW74824L 1,322. 1,459. 1,586.
W7R 489 249 D1WW74824R 1,322. 1,459. 1,586.
Transition tops T2 509 249 D1WT224 795. 878. 956.
T218 37 1/29 189 D1WT218 746. 825. 893.
T3 269 249 D1WT324 758. 838. 915.
T4 269 249 D1WT424 914. 1,004. 1,095.
T5 509 249 D1WT524 924. 1,018. 1,104.
T518 37 1/29 189 D1WT518 829. 910. 991.
Ordering Information
Worksurface
1. Pattern number2. Finish
Order Code
Example: D1WW134824L, 118,118
D1W Dividends 120 w/s 2mmedge
W13 Worksurface #13
4824 Side width/return depth
L Pedestal on left side
118 Bright White laminate
118 Bright White edge
Included with:
Worksurface
• Worksurface
Worksurface supports must beordered separately.
For all tops, specify laminate andedge color.
Transition and peninsula topsrequire a column base for support.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Refer to the worksurface planningpage for worksurface drawings andapplications.
Note: W3 worksurfaces have a graindirection option. Specify left, rightor diagonal. Add $26 to the listprice when specifying diagonal.
Dividends Horizon
152
Base Raceway ElectricalPower Modules, Connectors and Jumpers(3+1), (2+2 Shared and Independent Neutrals), (3+3) and (250v)
description type pattern no. E 8 & N250v
T
Power Module - Double sided forraceway on both sides
249W Panel DE(1E,18,1T,12V) PM24 $156. $173. $180.
309W Panel DE(1E,18,1T,12V) PM30 167. 185. 185.
369W Panel DE(1E,18,1T,12V) PM36 173. 189. 194.
429W Panel DE(1E,18,1T,12V) PM42 187. 204. 202.
489W Panel DE(1E,18,1T,12V) PM48 197. 213. 211.
609W Panel DE(1E,18,1T,12V) PM60 220. 242. 242.
Power Module - Single sided forraceway on one side
249W Panel DE(1E,18,1T,12V) PMS24 156. 173. 180.
309W Panel DE(1E,18,1T,12V) PMS30 167. 185. 185.
369W Panel DE(1E,18,1T,12V) PMS36 173. 189. 194.
429W Panel DE(1E,18,1T,12V) PMS42 187. 204. 202.
489W Panel DE(1E,18,1T,12V) PMS48 197. 213. 211.
609W Panel DE(1E,18,1T,12V) PMS60 220. 242. 242.
Power Module - Double sided forraceway on both sidesfor 2+2 Independent Neutrals
249W Panel DENPM242 0. 173. 0.
309W Panel DENPM302 0. 185. 0.
369W Panel DENPM362 0. 189. 0.
429W Panel DENPM422 0. 204. 0.
489W Panel DENPM482 0. 213. 0.
Power Module - Single sided forraceway on single sidefor 2+2 Independent Neutrals
249W Panel DENPM241 0. 173. 0.
309W Panel DENPM301 0. 185. 0.
369W Panel DENPM361 0. 189. 0.
429W Panel DENPM421 0. 204. 0.
489W Panel DENPM481 0. 213. 0.
Power Connector - (power module-to-powermodule)
129 no post DE(1E,18,1T,N) PCNP 103. 110. 124.
129 no post DE1(2V) PCNPM 103. 110. 124.
159 with post DE(1E,18,1T,N) PCWP 106. 113. 133.
159 with post DE1(2V) PCWPM 106. 113. 133.
219 Mesh with post DE1(E,8,T,2V) PC21M 113. 121. 132.
Ordering Information
Power Jumper
1. Pattern Number
Order Code
Power Jumper
Example: DE1E PJ42NP
DE1E Pattern Number
PJ42NP
Included with:
Power Jumper
Options
Power Jumper
Options(E) = 3+1(8) = 2+2 Shared Neutral(N) = 2+2 Independent Neutral(T) = 3+3(2V) = 250v
Note: Double-sided power modulewill not fit in a panel base racewaywith tile to the floor on one side.
Dividends Horizon
153
Ele
ctri
cal/D
ata
Com
pone
nts
Base Raceway ElectricalPower Modules, Connectors and Jumpers(3+1), (2+2 Shared and Independent Neutrals), (3+3) and (250v)
description type pattern no. E 8 & N250v
T
Power Jumper 159 Panel DE1(E,8,T,2V) PJ15NP $118. $136. $173.
189 Panel DE(1E,18,1T,12V,N) PJ18NP 118. 136. 173.
249 Panel DE(1E,18,1T,12V,N) PJ24NP 135. 145. 183.
309 Panel DE(1E,18,1T,12V,N) PJ30NP 141. 151. 188.
369 Panel DE(1E,18,1T,12V,N) PJ36NP 145. 157. 198.
429 Panel DE(1E,18,1T,12V,N) PJ42NP 151. 168. 204.
489 Panel DE(1E,18,1T,12V,N) PJ48NP 163. 182. 211.
Power Jumper (with post) 159 Panel + Post DE1(E,8,T,2V) PJ15WP 130. 142. 180.
189 Panel + Post DE(1E,18,1T,12V,N) PJ18WP 130. 142. 180.
249 Panel + Post DE(1E,18,1T,12V,N) PJ24WP 136. 149. 187.
309 Panel + Post DE(1E,18,1T,12V,N) PJ30WP 142. 155. 193.
369 Panel + Post DE(1E,18,1T,12V,N) PJ36WP 149. 166. 202.
429 Panel + Post DE(1E,18,1T,12V,N) PJ42WP 156. 173. 207.
Multiple Panel Power Jumper(with or without post)
549 Panel Run DE(1E,18,1T,12V,N) PJ54 WP 176. 193. 228.
609 Panel Run DE(1E,18,1T,12V,N) PJ60 WP 182. 198. 228.
669 Panel Run DE(1E,18,1T,12V,N) PJ66 WP 189. 207. 244.
729 Panel Run DE(1E,18,1T,12V,N) PJ72WP 194. 211. 251.
789 Panel Run DE(1E,18,1T,12V,N) PJ78 WP 202. 223. 255.
849 Panel Run DE(1E,18,1T,12V,N) PJ84WP 209. 234. 255.
969 Panel Run DE(1E,18,1T,12V,N) PJ96WP 222. 246. 282.
Ordering Information
Power Jumper
1. Pattern Number
Order Code
Power Jumper
Example: DE1E PJ42NP
DE1E Pattern Number
PJ42NP
Included with:
Power Jumper
Options
Power Jumper
Options(E) = 3+1(8) = 2+2 Shared Neutral(N) = 2+2 Independent Neutral(T) = 3+3(2V) = 250v
Note: Double-sided power modulewill not fit in a panel base racewaywith tile to the floor on one side.
Dividends Horizon
154
ReceptaclesKnockout Replacement Covers
description type pattern no.
Singlepack
list
Tenpack
list
Receptacle, (3+1) Duplex circuit 1 DE1DR1 ( ) $55. $435.
Duplex circuit 2 DE1DR2 ( ) 55. 435.
Duplex circuit 3 DE1DR3 ( ) 55. 435.
Duplex circuit 4 DE1DR4 ( ) 55. 435.
Receptacle, (2+2 Shared Neutral) Duplex circuit 1 DE1DR1 ( ) 55. 435.
Duplex circuit 2 DE1DR2 ( ) 55. 435.
Duplex circuit 4 DE1DR4 ( ) 55. 435.
Duplex circuit 5 DE1DR5 ( ) 55. 435.
Receptacle, (3+3) Duplex circuit 1 DE1DR1 ( ) 55. 435.
Duplex circuit 2 DE1DR2 ( ) 55. 435.
Duplex circuit 3 DE1DR3 ( ) 55. 435.
Duplex circuit 4 DE1DR4 ( ) 55. 435.
Duplex circuit 5 DE1DR5 ( ) 55. 435.
Duplex circuit 6 DE1DR6 ( ) 55. 435.
Receptacle, (Orange) Duplex circuit 4 DE1DOR4( ) 55. 435.
Duplex circuit 5 DE1DOR5( ) 55. 435.
Duplex circuit 6 DE1DOR6( ) 55. 435.
Receptacle, (With Controlled Symbol) Duplex circuit 1 DE1DR1C ( ) 55. 435.
Duplex circuit 2 DE1DR2C ( ) 55. 435.
Duplex circuit 3 DE1DR3C ( ) 55. 435.
Duplex circuit 4 DE1DR4C ( ) 55. 435.
Duplex circuit 5 DE1DR5C ( ) 55. 435.
Duplex circuit 6 DE1DR6C ( ) 55. 435.
Receptacle, (250v) Duplex circuit 1 DE1DR12V ( ) 56. 435.
Duplex circuit 2 (orange) DE1DR22V ( ) 56. 435.
Duplex circuit 3 DE1DR32V ( ) 56. 435.
Duplex circuit 4 DE1DR42V ( ) 56. 435.
Ordering Information
Receptacle
1. Pattern Number
Order Code
Receptacle
Example: DE1 DR4
DE1 DR4 Pattern Number
Included with:
Receptacle
Options
Receptacle
Quantity Option:(SP) = Single Pack(TP) = Ten Pack
Color Option:111 = Black114 = Folkstone Grey115 = Medium Grey118 = White117 = Soft Grey611 = Beige Mist Metallic
Dividends Horizon
155
Ele
ctri
cal/D
ata
Com
pone
nts
ReceptaclesKnockout Replacement Covers
description type pattern no.
Singlepack
list
Tenpack
list
Receptacle, (2+2 Independent Neutral) Duplex circuit 1 DEODRA( ) $55. $0.
Duplex circuit 2 DEODRB( ) 55. 0.
Duplex circuit 3 DEODRC( ) 55. 0.
Duplex circuit 4 DEODRX( ) 55. 0.
Base Raceway Knockout Replacement Cover (forelectrical or data)
Package of 10 DE2KC10 n/a 111.
Ordering Information
Receptacle
1. Pattern Number
Order Code
Receptacle
Example: DE1 DR4
DE1 DR4 Pattern Number
Included with:
Receptacle
Options
Receptacle
Quantity Option:(SP) = Single Pack(TP) = Ten Pack
Color Option:111 = Black114 = Folkstone Grey115 = Medium Grey118 = White117 = Soft Grey611 = Beige Mist Metallic
Dividends Horizon
156
ReceptaclesUSB
description type pattern no.
Singlepack
list
Tenpack
list
USB Receptacle Vertical Circuit 1 DE1USB1V( ) $153. $1,447.
Circuit 2 DE1USB2V( ) 153. 1,447.
Circuit 3 DE1USB3V( ) 153. 1,447.
Circuit 4 DE1USB4V( ) 153. 1,447.
Circuit 5 DE1USB5V( ) 153. 1,447.
Circuit 6 DE1USB6V( ) 153. 1,447.
USB Receptacle Horizontal Circuit 1 DE1USB1H( ) 153. 1,447.
Circuit 2 DE1USB2H( ) 153. 1,447.
Circuit 3 DE1USB3H( ) 153. 1,447.
Circuit 4 DE1USB4H( ) 153. 1,447.
Circuit 5 DE1USB5H( ) 153. 1,447.
Circuit 6 DE1USB6H( ) 153. 1,447.
Ordering Information
Vertical Power Module
1. Pattern Number
Order Code
Vertical Power Module
Example: DE1 USB 1V10W
DE1USB1V10W
Pattern Number
Included with:
Vertical Power Module
• USB Receptacle
Options
Vertical Power Module
Quantity Option:(V) = Vertical Single Pack(V10) = Vertical Ten Pack(H) = Horizontal Single Pack(H10) = Horizontal Ten Pack
Color Option:111 = Black114 = Folkstone Grey115 = Medium Grey118 = White117 = Soft Grey611 = Beige Mist Metallic
Dividends Horizon
157
Ele
ctri
cal/D
ata
Com
pone
nts
Vertical ElectricalPower Jumpers
description type pattern no.Single
packTen
pack 3+1 2+2250v3+3
Base Raceway Power Jumpers 489 Jumper DE(1E,18,1T,12V,N) PJ48WP $167. $185. $218.
549 Jumper DE(1E,18,1T,12V,N) PJ54WP 176. 193. 228.
609 Jumper DE(1E,18,1T,12V,N) PJ60WP 182. 198. 228.
669 Jumper DE(1E,18,1T,12V,N) PJ66WP 189. 207. 244.
729 Jumper DE(1E,18,1T,12V) PJ72WP 194. 211. 251.
789 Jumper DE(1E,18,1T,12V,N) PJ78WP 202. 223. 255.
849 Jumper DE(1E,18,1T,12V,N) PJ84WP 209. 234. 261.
Dividends Horizon
158
Vertical ElectricalTrim Plate Single Parts
description type pattern no.Single
packTen
pack 3+1 2+2250v3+3
Single Trim Plate Filler Package of 10 DE6 FDPF n/a $57.
Single Floating Data Port Trim Plate(field install kit)
Faceplate, backplateand hardward
DE1 FDP 66. n/a
Dividends Horizon
159
Ele
ctri
cal/D
ata
Com
pone
nts
Double Verical ElectricalPower Module and Trim PlateDouble Ports
description type pattern no.Single
packTen
pack 3+1 2+2250v3+3
Double Vertical Power Module Double Vertical Power Module DE6 D VPM $283. n/a
Double Vertical Power ModuleTrim Plate
Trim Plate - Double DE6 D FD P 72. n/a
Ordering Information
Vertical Power Module
1. Pattern Number
Order Code
Double Vertical Power Module
Example: DE6 D VPM
DE6 DVPM
Pattern Number
Included with:
Vertical Power Module
Options
Vertical Power Module
Insert appropriate letter for type ofwiring required within theparentheses of the patternnumber.(E) = 3+1(8) = 2+2(T) = 3+3(2V) = 250v(X) = 2 + 2 (Independent Neutral)
Double Trim Plate Color Option:111 = Black114 = Folkstone Grey115 = Medium Grey118 = White117 = Soft Grey611 = Beige Mist Metallic
Dividends Horizon
160
Desktop Power and Data ModulesTable Undermount Outlet
description type pattern no. list
Electrical Outlet for Table Undermount110, 1 power + 1 dual USB + 0 Data
729 cordset DDOTU11072(BB/WW/WS) $557.
1209 cordset DDOTU110120(BB/WW/WS) 570.
Electrical Outlet for Table Undermount21C, 2 power + 1 dual USB + 1 USB C
729 cordset DDOTU21C72(BB/WW/WS) 968.
1209 cordset DDOTU21C120(BB/WW/WS) 990.
Electrical Outlet for Table Undermount210, 2 power + 1 dual USB + 0 data
729 cordset DE4TU21072(BB/WW/WS) 692.
1209 cordset DE4TU210120(BB/WW/WS) 716.
729 hardwire DE4TU210H(BB/WW/WS) 771.
Electrical Outlet for Table Undermount202, 2 power + 0 dual USB + 2 data
729 cordset DE4TU20272(BB/WW/WS) 597.
1209 cordset DE4TU202120(BB/WW/WS) 651.
729 hardwire DE4TU202H(BB/WW/WS) 747.
Electrical Outlet for Table Undermount311, 3 power + 1 dual USB + 1 data
729 cordset DE4TU31172(BB/WW/WS) 838.
1209 cordset DE4TU311120(BB/WW/WS) 861.
729 hardwire DE4TU311H(BB/WW/WS) 948.
Electrical Outlet for Table Undermount412, 4 power + 1 dual USB + 2 data
729 cordset DE4TU41272(BB/WW/WS) 934.
1209 cordset DE4TU412120(BB/WW/WS) 956.
729 hardwire DE4TU412H(BB/WW/WS) 1,044.
Order Code
Example: DE4TU21072 (BB)
DE4 Dividends HorizonDesktop Outlet
TU Table Undermount
210 2 Power, 1 USB, O Data
72 729 cordset, 120=1209
cord,H=729 Hardwire
( ) Color Option
Specification Information
To order please specify patternnumber including:
1. Color option, (housing / bracket):BB=Black/BlackWW = White/WhiteWS=White/Silver
Application Notes
Installation instruction sheetavailable on Knoll Exchange.
Refer to planning guide pages forcomplete description.
USB outlet is for rechargingpurposes only. No data transfer. AllDesktop outlets are UL listed.
Simplex receptacles and USBcharging ports are wired togetherand on the same circuit.
Dividends Horizon
161
Ele
ctri
cal/D
ata
Com
pone
nts
Desktop Power and Data ModulesClamp-on
description type pattern no. list
Clamp-on Electrical Outlet110, 1 power + 1 dual USB + 0 data
729 cordset DDOCL11072(BB/WW/WS) $616.
1209 cordset DDOCL110120(BB/WW/WS) 636.
Clamp-on Electrical Outlett21C, 1 power + 1 dual USB + 1 USB C
729 cordset DDOCL21C72(BB/WW/WS) 1,013.
1209 cordset DDOCL21C120(BB/WW/WS) 1,043.
Clamp-on Electrical Outlet210, 2 power + 1 dual USB + 0 data
729 cordset DE4CL21072(BB/WW/WS) 747.
1209 cordset DE4CL210120(BB/WW/WS) 768.
729 hardwire DE4CL210H(BB/WW/WS) 826.
Clamp-on Electrical Outlet202, 2 power + 0 dual USB + 2 data
729 cordset DE4CL20272(BB/WW/WS) 619.
1209 cordset DE4CL202120(BB/WW/WS) 645.
729 hardwire DE4CL202H(BB/WW/WS) 730.
Clamp-on Electrical Outlet311, 3 power + 1 dual USB + 1 data
729 cordset DE4CL31172(BB/WW/WS) 825.
1209 cordset DE4CL311120(BB/WW/WS) 848.
729 hardwire DE4CL311H(BB/WW/WS) 936.
Order Code
Example: DE4CL21072 (BB)
DE4 Dividends HorizonDesktop Outlet
CL Clamp-on
210 2 Power, 1 USB, O Data
72 729 cordset, 120=1209
cord,H=729 Hardwire
( ) Color Option
Specification Information
To order please specify patternnumber including:
1. Color option, (housing / bracket):BB=Black/BlackWW = White/WhiteWS=White/Silver
Application Notes
Installation instruction sheetavailable on Knoll Exchange.
Refer to planning guide pages forcomplete description.
USB outlet is for rechargingpurposes only. No data transfer. AllDesktop outlets are UL listed.
Simplex receptacles and USBcharging ports are wired togetherand on the same circuit.
Dividends Horizon
162
Desktop Power and Data ModulesClamp-on
description type pattern no. list
Clamp-on Electrical Outlet412, 4 power + 1 dual USB + 2 data
729 cordset DE4CL41272(BB/WW/WS) $924.
1209 cordset DE4CL412120(BB/WW/WS) 948.
729 hardwire DE4CL412H(BB/WW/WS) 1,035.
Thumb Screw Kit 1 set = 2 screws RDOTK1 17.
Order Code
Example: DE4CL21072 (BB)
DE4 Dividends HorizonDesktop Outlet
CL Clamp-on
210 2 Power, 1 USB, O Data
72 729 cordset, 120=1209
cord,H=729 Hardwire
( ) Color Option
Specification Information
To order please specify patternnumber including:
1. Color option, (housing / bracket):BB=Black/BlackWW = White/WhiteWS=White/Silver
Application Notes
Installation instruction sheetavailable on Knoll Exchange.
Refer to planning guide pages forcomplete description.
USB outlet is for rechargingpurposes only. No data transfer. AllDesktop outlets are UL listed.
Simplex receptacles and USBcharging ports are wired togetherand on the same circuit.
Dividends Horizon
163
Ele
ctri
cal/D
ata
Com
pone
nts
Desktop Power and Data ModulesOffset Clamp-on
description type pattern no. list
Offset Clamp-on Electrical Outlet110, 1 power + 1 dual USB + 0 data
729 cordset DDOOC11072 (BB/WW/WS) $633.
1209 cordset DDOOC110120 (BB/WW/WS) 652.
Offset Clamp-on Electrical Outlet21C, 2 power + 1 dual USB + 1 USB C
729 cordset DDOOC21C72 (BB/WW/WS) 1,033.
1209 cordset DDOOC21C120 (BB/WW/WS) 1,054.
Offset Clamp-on Electrical Outlet202, 2 power + 0 dual USB + 2 data
729 cordset DE4OC20272 (BB/WW/WS) 619.
1209 cordset DE4OC202120 (BB/WW/WS) 645.
729 hardwire DE4OC202H (BB/WW/WS) 730.
Offset Clamp-on Electrical Outlet210, 2 power + 1 dual USB + 0 data
729 cordset DE4OC21072 (BB/WW/WS) 747.
1209 cordset DE4OC210120 (BB/WW/WS) 768.
729 hardwire DE4OC210H (BB/WW/WS) 826.
Offset Clamp-on Electrical Outlet311, 3 power + 1 dual USB + 1 data
729 cordset DE4OC31172 (BB/WW/WS) 825.
1209 cordset DE4OC311120 (BB/WW/WS) 848.
729 hardwire DE4OC311H (BB/WW/WS) 936.
Order Code
Example: DE4OC21072 (BB)
DE4 Dividends HorizonDesktop Outlet
OC Offset Clamp-on
210 2 Power, 1 USB, O Data
72 729 cordset, 120=1209
cord,H=729 Hardwire
( ) Color Option
Specification Information
To order please specify patternnumber including:
1. Color option, (housing / bracket):BB=Black/BlackWW = White/WhiteWS=White/Silver
Application Notes
Installation instruction sheetavailable on Knoll Exchange.
Refer to planning guide pages forcomplete description.
USB outlet is for rechargingpurposes only. No data transfer. AllDesktop outlets are UL listed.
Simplex receptacles and USBcharging ports are wired togetherand on the same circuit.
Dividends Horizon
164
Desktop Power and Data ModulesOffset Clamp-on
description type pattern no. list
Offset Clamp-on Electrical Outlet412, 4 power + 1 dual USB + 2 data
729 cordset DE4OC41272 (BB/WW/WS) $924.
1209 cordset DE4OC412120 (BB/WW/WS) 948.
729 hardwire DE4OC412H (BB/WW/WS) 1,035.
Order Code
Example: DE4OC21072 (BB)
DE4 Dividends HorizonDesktop Outlet
OC Offset Clamp-on
210 2 Power, 1 USB, O Data
72 729 cordset, 120=1209
cord,H=729 Hardwire
( ) Color Option
Specification Information
To order please specify patternnumber including:
1. Color option, (housing / bracket):BB=Black/BlackWW = White/WhiteWS=White/Silver
Application Notes
Installation instruction sheetavailable on Knoll Exchange.
Refer to planning guide pages forcomplete description.
USB outlet is for rechargingpurposes only. No data transfer. AllDesktop outlets are UL listed.
Simplex receptacles and USBcharging ports are wired togetherand on the same circuit.
Dividends Horizon
165
Ele
ctri
cal/D
ata
Com
pone
nts
Desktop Power and Data ModulesClamp mount
description type w d h pattern no. list
Desktop Power Module,clamp mount, Black
With 729 Cord 3 3/49 4 1/29 2 1/29 DE4WSME72 $162.
With 1089 Cord 3 3/49 4 1/29 2 1/29 DE4WSME108 202.
Desktop Power + Data Module,clamp mount, Black
With 729 Cord 6 1/89 4 1/29 2 1/29 DE4WSMED72 392.
With 1089 Cord 6 1/89 4 1/29 2 1/29 DE4WSMED108 433.
Ordering Information
Desktop Power Module
1. Pattern Number
Order Code
Desktop Power Module
Example: DE4 WSME108
Included with Options
Dividends Horizon
166
Beltway ElectricalPower Modules, Power Connectors and Power Jumpers
description type length pattern no. list 3+1 2+2250v3+3
Beltway Power Module - 1-Side 309 DE1( ) BPM301 $218. $241. $241.
369 DE1( ) BPM361 230. 251. 246.
429 DE1( ) BPM421 241. 257. 255.
489 DE1( ) BPM481 251. 279. 267.
609 DE1( ) BPM601 283. 290. 290.
Beltway Power Module - 2-Side 309 DE1( ) BPM302 218. 241. 241.
369 DE1( ) BPM362 230. 251. 246.
429 DE1( ) BPM422 241. 257. 255.
489 DE1( ) BPM482 251. 279. 267.
609 DE1( ) BPM602 283. 290. 290.
Beltway Power Connector 179 No Post DE2( ) BPCNP 108. 117. 134.
209 With Post DE2( ) BPCWP 110. 128. 139.
219 Mesh with post DE1(E,8,T,2V) PC21M 121. 113. 132.
Intermediate Connector 250v DE12VPA 33.
Independent neutrals (4-4-2) DE1IPA 33.
Shared neutrals (3+1, 2+2, 3+3) DE1SPA 33.
Beltway Power Jumper (No post) 189 DE2( ) BPJ18NP 134. 144. 180.
249 DE2( ) BPJ24NP 139. 150. 186.
309 DE2( ) BPJ30NP 144. 156. 197.
369 DE2( ) BPJ36NP 150. 166. 202.
429 DE2( ) BPJ42NP 161. 177. 210.
489 DE2( ) BPJ48NP 165. 183. 217.
Beltway Power Jumper (With post) 189 DE2( ) BPJ18WP 135. 147. 185.
249 DE2( ) BPJ24WP 141. 154. 190.
309 DE2( ) BPJ30WP 147. 164. 201.
369 DE2( ) BPJ36WP 155. 173. 205.
429 DE2( ) BPJ42WP 165. 183. 217.
489 DE2( ) BPJ48WP 177. 186. 220.
Multiple Panel Power Jumper (with or withoutpost)
549 Panel Run DE2( ) BPJ54WP 177. 197. 226.
609 Panel Run DE2( ) BPJ60WP 187. 205. 241.
669 Panel Run DE2( ) BPJ66WP 193. 209. 249.
729 Panel Run DE2( ) BPJ72WP 201. 220. 253.
789 Panel Run DE2( ) BPJ78WP 208. 230. 257.
849 Panel Run DE2( ) BPJ84WP 220. 246. 279.
Ordering Information
Beltway Power Jumper
1. Pattern Number
Note: Insert appropriate letter fortype of wiring required within theparentheses of the pattern number.
Order Code
Beltway Power Jumper
Example: DE1(E) BPJ30
DE1(E)BPJ30
Pattern Number
Included with:
Beltway Power Jumper
Options
Beltway Power JumperInsert appropriate letter for type ofwiring required within theparentheses of the pattern number.
• E= 3+1• 8= 2+2 (Shared Neutral)• N=2+2 (Independent Neutral)• T= 3+3• 2V= 250v
Dividends Horizon
167
Ele
ctri
cal/D
ata
Com
pone
nts
Beltway ElectricalPower Modules, Power Connectors and Power Jumpers
description type length pattern no. list 3+1 2+2250v3+3
Multiple Panel Power Jumper (with or withoutpost)
969 Panel Run DE2( ) BPJ96WP $237. $254. $289.
90° Beltway Power Jumper 309 Beltway Panel DE1( ) PJ120WP 286. 314. 359.
369 Beltway Panel DE1( ) PJ126WP 294. 325. 374.
429 Beltway Panel DE1( ) PJ138WP 309. 341. 385.
489 Beltway Panel DE1( ) PJ144WP 318. 353. 400.
Vertical Power Jumper (Within Same Panel) DE1( ) VPJ 246. 267. 253.
Vertical Power Jumper (From Adjacent Panel) 309 Beltway Panel DE(1E,18,1T,12V,N) PJ48WP 167. 185. 218.
369 Beltway Panel DE(1E,18,1T,12V,N) PJ54WP 176. 193. 228.
429 Beltway Panel DE(1E,18,1T,12V,N) PJ60WP 182. 198. 228.
Ordering Information
Beltway Power Jumper
1. Pattern Number
Note: Insert appropriate letter fortype of wiring required within theparentheses of the pattern number.
Order Code
Beltway Power Jumper
Example: DE1(E) BPJ30
DE1(E)BPJ30
Pattern Number
Included with:
Beltway Power Jumper
Options
Beltway Power JumperInsert appropriate letter for type ofwiring required within theparentheses of the pattern number.
• E= 3+1• 8= 2+2 (Shared Neutral)• N=2+2 (Independent Neutral)• T= 3+3• 2V= 250v
Dividends Horizon
168
Electrical Infeeds and Power PolesBase Power and Raceway-to-Ceiling Infeeds
description type length pattern no. list
Base Power Infeed (specify left or right) (rightshown)
250v 569 DE12V BI56(L/R) $213.
3+1 569 DE1E BI56(L/R) 282.
2+2 (Independent Neutral) 569 DENBI56(L/R) 310.
2+2 (Shared Neutral) 569 DE18 BI56(L/R) 310.
3+3 569 DE1T BI56(L/R) 362.
2+2 (Shared Neutral) 1449 DE18 BI144(L/R) 449.
3+1 1449 DE1E BI144(L/R) 449.
3+3 1449 DE1T BI144(L/R) 488.
2+2 (Independent Neutral) 1449 DENBI144(L/R) 508.
2+2 (Independent Neutral) 1569 DENBI156(L/R) 612.
2+2 (Shared Neutral) 2169 DE18 BI216(L/R) 612.
3+0 2169 DE1E BI216(L/R) 612.
3+3 2169 DE1T BI216(L/R) 661.
2+2 (Independent Neutral) 2169 DENBI216(L/R) 861.
2+2 (Shared Neutral) 2889 DE18 BI288(L/R) 861.
3+1 2889 DE1E BI288(L/R) 861.
2+2 (Independent Neutral) 2889 DENBI288(L/R) 909.
3+3 2889 DE1T BI288(L/R) 935.
Base Power Infeed (reversible) 250v 569 DE12V RBI56 224.
3+1 569 DE1E RBI56 342.
2+2 (Independent Neutral) 569 DENRBI56 374.
2+2 (Shared Neutral) 569 DE18 RBI56 374.
3+3 569 DE1T RBI56 447.
2+2 (Independent Neutral) 1449 DENRBI144 549.
2+2 (Shared Neutral) 1449 DE18 RBI144 549.
3+1 1449 DE1E RBI144 549.
3+3 1449 DE1T RBI144 591.
2+2 (Independent Neutral) 1569 DENRBI156 670.
2+2 (Independent Neutral) 2169 DENRBI216 733.
2+2 (Shared Neutral) 2169 DE18 RBI216 733.
3+1 2169 DE1E RBI216 733.
3+3 2169 DE1T RBI216 789.
2+2 (Independent Neutral) 2889 DENRBI288 919.
3+3 2889 DE1T RBI288 1,001.
Ordering Information
Base Power Infeed (L/R)
1. Pattern Number
Power Pole
1. Pattern Number2. Trim Finish
Note: Power poles mount atopexisting post connectors in ‘‘L’’, ‘‘T’’and ‘‘X’’ configurations
Order Code
Base Power Infeed (L/R)
Example: DE18 BI56(L)
DE18BI56(L)
Pattern Number (leftentry)
Power Pole
Example: DE(1) PP64S, 117
DE(1)PP64S
Pattern Number
117 Soft Grey trim finish
Included with:
Base Power Infeed (L/R)
Power Pole
• Power pole• Ceiling trim plate• Connecting hardware• Post/power pole trim cover
Note: Power pole does not includeraceway-to-ceiling infeed whichmust be ordered separately.
Options
Base Power Infeed (L/R)
• To specify direction of entry, addeither an ‘‘L’’ or ‘‘R’’ suffix to thepattern number.
Insert appropriate number for postcover option within the parenthesesof the pattern number
Dividends Horizon Power Pole
• Post cover
Dividends Horizon
169
Ele
ctri
cal/D
ata
Com
pone
nts
Electrical Infeeds and Power PolesBase Power and Raceway-to-Ceiling Infeeds
description type length pattern no. list
Base Power Infeed (reversible) 2+2 (Shared Neutral) 2889 DE18 RBI288 $919.
3+1 2889 DE1E RBI288 919.
Raceway-to-Ceiling Infeed 250v 1449 DE2V CI144 232.
3+1 1449 DE1E CI144 410.
2+2 (Independent Neutral) 1449 DENCI144 451.
2+2 (Shared Neutral) 1449 DE18 CI144 451.
3+3 1449 DE1T CI144 523.
Ordering Information
Base Power Infeed (L/R)
1. Pattern Number
Power Pole
1. Pattern Number2. Trim Finish
Note: Power poles mount atopexisting post connectors in ‘‘L’’, ‘‘T’’and ‘‘X’’ configurations
Order Code
Base Power Infeed (L/R)
Example: DE18 BI56(L)
DE18BI56(L)
Pattern Number (leftentry)
Power Pole
Example: DE(1) PP64S, 117
DE(1)PP64S
Pattern Number
117 Soft Grey trim finish
Included with:
Base Power Infeed (L/R)
Power Pole
• Power pole• Ceiling trim plate• Connecting hardware• Post/power pole trim cover
Note: Power pole does not includeraceway-to-ceiling infeed whichmust be ordered separately.
Options
Base Power Infeed (L/R)
• To specify direction of entry, addeither an ‘‘L’’ or ‘‘R’’ suffix to thepattern number.
Insert appropriate number for postcover option within the parenthesesof the pattern number
Dividends Horizon Power Pole
• Post cover
Dividends Horizon
170
Electrical Infeeds and Power PolesDP7 and DP8 Power Poles
description type length pattern no. P1 P2 P3
Dividends Horizon Power Pole for use with DP7& DP8 Series Posts only (does not includeRaceway-to-Ceiling Infeed) For 1269 ceilingheight
For 369H DP7 Post 909 DP7PP36S $583. $611. $640.
For 429H DP7 Post 849 DP7PP42S 535. 561. 591.
For 509H DP7 Post 769 DP7PP50S 493. 516. 541.
For 579H DP7 Post 699 DP7PP57S 436. 455. 481.
For 649H DP7 Post 629 DP7PP64S 429. 447. 472.
For 789H DP7 Post 489 DP7PP78S 429. 447. 472.
Dividends Horizon Power Pole for use with DP7& DP8 Series Posts only (does not includeRaceway-to-Ceiling Infeed) For 1449 ceilingheight
For 369H DP7 Post 1089 DP7PP36T 594. 625. 651.
For 429H DP7 Post 1029 DP7PP42T 543. 572. 600.
For 509H DP7 Post 949 DP7PP50T 493. 516. 541.
For 579H DP7 Post 869 DP7PP57T 436. 455. 481.
For 649H DP7 Post 809 DP7PP64T 429. 447. 472.
For 789H DP7 Post 669 DP7PP78T 429. 447. 472.
Ordering Information
Power Pole
1. Pattern Number2. Trim Finish
Order Code
Power Pole
Example: DE(2) PP64S, 117
DE(2)PP64S
Pattern Number
117 Soft Grey trim finish
Included With
Power Pole
• Power pole• Ceiling trim plate• Connecting hardware• Post/power pole trim cover
Note: Power pole does not includeraceway-to-ceiling infeed whichmust be ordered separately.
Note: Power poles mount atopexisting post connectors in ‘‘L’’, ‘‘T’’and ‘‘X’’ configurations.
Dividends Horizon
171
Ele
ctri
cal/D
ata
Com
pone
nts
Electrical InfeedsRaceway-to-Ceiling and End-of-Run Infeeds
description type length pattern no. list
Raceway-to-Ceiling Infeed 2+2 2889 DE18 CI288 $767.
3+1 2889 DE1E CI288 767.
3+3 2889 DE1T CI288 833.
End-of-Run Infeed 10-wire (2+2) 569 DE1X ERE56 674.
2+2 569 DE18 ERE56 631.
250v 569 DE12V ERE56 683.
3+1 569 DE1E ERE56 635.
3+3 569 DE1T ERE56 680.
Ordering Information
Base Power Infeed (L/R)
1. Pattern Number
Power Pole
1. Pattern Number2. Trim Finish
Note: Power poles mount atopexisting post connectors in ‘‘L’’, ‘‘T’’and ‘‘X’’ configurations
Order Code
Base Power Infeed (L/R)
Example: DE18 BI56(L)
DE18BI56(L)
Pattern Number (leftentry)
Power Pole
Example: DE(1) PP64S, 117
DE(1)PP64S
Pattern Number
117 Soft Grey trim finish
Included with:
Base Power Infeed (L/R)
Power Pole
• Power pole• Ceiling trim plate• Connecting hardware• Post/power pole trim cover
Note: Power pole does not includeraceway-to-ceiling infeed whichmust be ordered separately.
Options
Base Power Infeed (L/R)
• To specify direction of entry, addeither an ‘‘L’’ or ‘‘R’’ suffix to thepattern number.
Insert appropriate number for postcover option within the parenthesesof the pattern number
Dividends Horizon Power Pole
• Post cover
Dividends Horizon
172
New York City, San Francisco and Chicago ElectricalInfeeds and Retrofit Kit
description type l pattern no. list
Hardwire Infeed (NYC) - 1 Direction 2+2 DE18 B1NY1 $853.
3+1 DE1E B1NY1 740.
3+3 DE1T B1NY1 955.
Base Power Infeed (San Francisco) 2+2 569 DE18 BI56( )SF 293.
3+1 569 DE1E BI56( )SF 263.
3+3 569 DE1T BI56( )SF 345.
Reversible Base Power Infeed (San Francisco) 2+2 569 DE18 RBI56SF 356.
3+1 569 DE1E RBI56SF 322.
3+3 569 DE1T RBI56SF 427.
Electrical Retrofit Kit (Chicago)(for electrical on new panel base raceway)
DP7CERK 94.
Ordering Information
Hardwire Infeed (NYC)
1. Pattern Number
Order Code
Hardwire Infeed (NYC)
Example: DE1E B1NY1
DE1EB1NY1
Pattern Number
Included with:
Hardwire Infeed (NYC)
• Junction box with powerconnector and infeed
• Ceiling trim plate• Attachment screws
Options
Hardwire Infeed (NYC)
Power System
• 3+1• 2+2• 3+3
San Francisco Infeed directionoption(L) = Left(R) = Right
Note: The electrical retrofit kitprovides brackets that connectChicago Electrical components thatwere manufactured prior to June2008 to DP8 panel base raceways.
Dividends Horizon
173
Ele
ctri
cal/D
ata
Com
pone
nts
New York City, San Francisco and Chicago ElectricalInfeeds, Receptacle Kits and Replacement Kits
description type l pattern no. list
Hardwire Infeed Raceway Kit (Chicago) Double Sided 249 DP7HIRKD24 $525.
Double Sided 309 DP7HIRKD30 888.
Double Sided 369 DP7HIRKD36 894.
Double Sided 429 DP7HIRKD42 903.
Double Sided 489 DP7HIRKD48 909.
Double Sided 609 DP7HIRKD60 922.
Single Sided 249 DP7HIRKS24 736.
Single Sided 309 DP7HIRKS30 1,047.
Single Sided 369 DP7HIRKS36 1,053.
Single Sided 429 DP7HIRKS42 1,057.
Single Sided 489 DP7HIRKS48 1,064.
Single Sided 609 DP7HIRKS60 1,082.
Hardwire Receptacle Raceway Kit (Chicago) Double Sided 249 DP7HRRKD24 403.
Double Sided 309 DP7HRRKD30 674.
Double Sided 369 DP7HRRKD36 683.
Double Sided 429 DP7HRRKD42 688.
Double Sided 489 DP7HRRKD48 694.
Double Sided 609 DP7HRRKD60 712.
Single Sided 249 DP7HRRKS24 468.
Single Sided 309 DP7HRRKS30 658.
Single Sided 369 DP7HRRKS36 666.
Single Sided 429 DP7HRRKS42 666.
Single Sided 489 DP7HRRKS48 671.
Single Sided 609 DP7HRRKS60 686.
Pre-Drilled Replacement Covers, Pair (Chicago) 249 Wide Panel 249 DP7RCCH24 57.
309 Wide Panel 309 DP7RCCH30 63.
369 Wide Panel 369 DP7RCCH36 66.
429 Wide Panel 429 DP7RCCH42 76.
489 Wide Panel 489 DP7RCCH48 80.
609 Wide Panel 609 DP7RCCH60 94.
Ordering Information
Hardwire Infeed (NYC)
1. Pattern Number
Order Code
Hardwire Infeed (NYC)
Example: DE1E B1NY1
DE1EB1NY1
Pattern Number
Included with:
Hardwire Infeed (NYC)
• Junction box with powerconnector and infeed
• Ceiling trim plate• Attachment screws
Options
Hardwire Infeed (NYC)
Power System
• 3+1• 2+2• 3+3
San Francisco Infeed directionoption(L) = Left(R) = Right
Note: The electrical retrofit kitprovides brackets that connectChicago Electrical components thatwere manufactured prior to June2008 to DP8 panel base raceways.
Dividends Horizon
174
Cable ManagementAccessories
description type pattern no. list
Worksurface Cable Management Basket 19 1/29 wide D1WB20 $62.
25 1/29 wide D1WB26 64.
31 1/29 wide D1WB32 79.
359 wide D1WB36 88.
419 wide D1WB42 94.
Vertical Wire Pathway Grommet (optional) Package of 10 DP1 VWG 257.
Topway Cable Grommet Package of 40 DP1 TKC 89.
Worksurface Cable Management Clip Package of 10 D1WC 58.
Data Shield 1 Pair for use with base raceway DE1DATSHD 61.
1 Pair for use with tile to floor DE1DATSHDF 80.
Ordering Information
Base Raceway Cable Tray
1. Pattern Number
Order Code
Base Raceway Cable Tray
Example: DP1 RCT24
DP1RCT24
Pattern Number
Included with:
Base Raceway Cable Tray
Options
Base Raceway Cable Tray
Note: Cable trays are for use withall DP7 and DP8 series panels andall panels produced prior toNovember 2007.
Note: Data Shield is not compatiblewith open base panels.
Dividends Horizon
175
Ele
ctri
cal/D
ata
Com
pone
nts
Cable ManagementBase Raceway and Beltway Cable Trays
description type pattern no. list
Base Raceway Cable Tray - double sidedfor use with raceway on both sides (optional)
189 Panel Width DP72RCT18 $39.
249 Panel Width DP72RCT24 41.
309 Panel Width DP72RCT30 46.
369 Panel Width DP72RCT36 50.
429 Panel Width DP72RCT42 52.
489 Panel Width DP72RCT48 58.
609 Panel Width DP72RCT60 63.
Base Raceway Cable Tray - single sidedfor use with raceway on one side (optional)
189 Panel Width DP71RCT18 39.
249 Panel Width DP71RCT24 41.
309 Panel Width DP71RCT30 46.
369 Panel Width DP71RCT36 50.
429 Panel Width DP71RCT42 52.
489 Panel Width DP71RCT48 58.
609 Panel Width DP71RCT60 63.
Beltway Cable Tray (optional) 189 Panel Width DP1BCT18 41.
249 Panel Width DP1BCT24 42.
309 Panel Width DP1BCT30 48.
369 Panel Width DP1BCT36 51.
429 Panel Width DP1BCT42 55.
489 Panel Width DP1BCT48 61.
609 Panel Width DP1BCT60 87.
Ordering Information
Base Raceway Cable Tray
1. Pattern Number
Order Code
Base Raceway Cable Tray
Example: DP1 RCT24
DP1RCT24
Pattern Number
Included with:
Base Raceway Cable Tray
Options
Base Raceway Cable Tray
Note: Cable trays are for use withall DP7 and DP8 series panels andall panels produced prior toNovember 2007.
Dividends Horizon
176
Flip-Up Door OverheadsPanel- and Wall-MountedSeries 2 and Horizon Series 3
description w * w d h pattern no. P1 P2 P3 V1-P1 V1-P2 V1-P3
Series 2 Flip-Up Overheadw/ Steel or Veneer Door
249 23 7/89 14 1/89 159 DS2PM24L $783. $905. $946. $1,229. $1,352. $1,386.
309 29 7/89 14 1/89 159 DS2PM30L 783. 905. 946. 1,229. 1,352. 1,386.
369 35 7/89 14 1/89 159 DS2PM36L 853. 983. 1,025. 1,243. 1,368. 1,412.
429 41 7/89 14 1/89 159 DS2PM42L 933. 1,069. 1,113. 1,272. 1,417. 1,463.
489 47 7/89 14 1/89 159 DS2PM48L 1,025. 1,175. 1,229. 1,366. 1,519. 1,573.
549 53 7/89 14 1/89 159 DS2PM54L 1,214. 1,399. 1,463. 1,948. 2,127. 2,190.
609 59 7/89 14 1/89 159 DS2PM60L 1,214. 1,399. 1,463. 1,948. 2,127. 2,190.
669 65 7/89 14 1/89 159 DS2PM66L 1,355. 1,558. 1,627. 2,037. 2,241. 2,309.
729 71 7/89 14 1/89 159 DS2PM72L 1,355. 1,558. 1,627. 2,037. 2,241. 2,309.
Dividends ‘‘touchdown’’ retro-fit (two kitsrequired for 549w - 729w)
DS1EAKIT 407.
Series 3 Flip-Up Overheadw/ Steel Door
309 29 7/89 14 1/29 159 DS3PMS30L 759. 837. 875.
369 35 7/89 14 1/29 159 DS3PMS36L 782. 861. 900.
429 41 7/89 14 1/29 159 DS3PMS42L 804. 888. 928.
489 47 7/89 14 1/29 159 DS3PMS48L 833. 916. 955.
609 59 7/89 14 1/29 159 DS3PMS60L 1,048. 1,155. 1,210.
669 65 7/89 14 1/29 159 DS3PMS66L 1,142. 1,260. 1,315.
729 71 7/89 14 1/29 159 DS3PMS72L 1,142. 1,260. 1,315.
Series 3 Flip-Up Overheadw/ Laminate Door
309 29 7/89 14 1/29 159 DS3PML30L 1,146. 1,279. 1,335.
369 35 7/89 14 1/29 159 DS3PML36L 1,200. 1,311. 1,370.
429 41 7/89 14 1/29 159 DS3PML42L 1,233. 1,352. 1,411.
489 47 7/89 14 1/29 159 DS3PML48L 1,307. 1,436. 1,498.
609 59 7/89 14 1/29 159 DS3PML60L 1,958. 2,147. 2,240.
669 65 7/89 14 1/29 159 DS3PML66L 1,987. 2,180. 2,295.
729 71 7/89 14 1/29 159 DS3PML72L 2,044. 2,246. 2,347.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Dividends Series 1 Flip-Up DoorOverhead
1. Pattern Number2. Paint Finish3. Door End Cap Finish
Series 2 Flip-Up Door Overhead
1. Pattern Number2. Paint Finish3. Door Finish
(veneer door only)
Series 3 Flip-Up Door Overhead
1. Pattern Number2. Paint Finish case3. Door Finish
(laminate and veneer door only)4. Door Edge Finish
(laminate door only)
Order Code
Dividends Series 1 Flip-Up DoorOverhead
Example: DS1O 30L, 113, 113
DS1O 30L Pattern Number
113 Dark grey paint finish
113 Dark grey End cap finish
Series 2 Flip-Up Overhead w/Steel DoorExample: DS2PM 30L, 115
DS2PM30L
Pattern Number
115 Medium grey paintfinish
Included with:
Dividends Series 1 Flip-Up DoorOverhead
Series 2 Flip-Up Overhead
Series 3 Flip-Up Overhead
Note: Touchdown mechanism notavailable on veneer or laminatefront Flip-Up overheads.
Note: Series 3 Horizon overheadsare only available in Knoll corefinishes.
Wallmount bracket specifiedseparately.
Options
Flip-Up Door Door OverheadTo specify overhead cabinetwithout locks replace the ‘‘L’’suffix from the pattern numberwith ‘‘N’’ Deduct $20. For 54(, 60(,66( and 72( overhead cabinetsDeduct $40
To specify Touchdown overheadcabinet, add ‘‘E’’ as the 2nd to lastdigit of the pattern numberExample:DS3PML48EL(Add $163 for cabinet widths of48( or less. Add $327 for cabinetwidths of 54( or greater).
Series 2 and Series 3 Flip-Up DoorOverhead Finish Option:Add a ‘‘Y’’ to the end of the patternnumber to specify a different finishfor the door versus the case. Use P3pricing for this dual finish option.
Dividends Horizon
177
Sto
rage
Com
pone
nts
Flip-Up Door OverheadsPanel- and Wall-MountedSeries 2 and Horizon Series 3
description w * w d h pattern no. P1 P2 P3 V1-P1 V1-P2 V1-P3
Series 3 Flip-Up Overheadw/ Veneer Door
309 29 7/89 14 1/29 159 DS3PMV30L $1,585. $1,735. $1,814.
369 35 7/89 14 1/29 159 DS3PMV36L 1,621. 1,778. 1,860.
429 41 7/89 14 1/29 159 DS3PMV42L 1,658. 1,821. 1,903.
489 47 7/89 14 1/29 159 DS3PMV48L 1,730. 1,881. 1,967.
609 59 7/89 14 1/29 159 DS3PMV60L 2,791. 3,065. 3,201.
669 65 7/89 14 1/29 159 DS3PMV66L 2,866. 3,152. 3,309.
729 71 7/89 14 1/29 159 DS3PMV72L 2,890. 3,170. 3,317.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Dividends Series 1 Flip-Up DoorOverhead
1. Pattern Number2. Paint Finish3. Door End Cap Finish
Series 2 Flip-Up Door Overhead
1. Pattern Number2. Paint Finish3. Door Finish
(veneer door only)
Series 3 Flip-Up Door Overhead
1. Pattern Number2. Paint Finish case3. Door Finish
(laminate and veneer door only)4. Door Edge Finish
(laminate door only)
Order Code
Dividends Series 1 Flip-Up DoorOverhead
Example: DS1O 30L, 113, 113
DS1O 30L Pattern Number
113 Dark grey paint finish
113 Dark grey End cap finish
Series 2 Flip-Up Overhead w/Steel DoorExample: DS2PM 30L, 115
DS2PM30L
Pattern Number
115 Medium grey paintfinish
Included with:
Dividends Series 1 Flip-Up DoorOverhead
Series 2 Flip-Up Overhead
Series 3 Flip-Up Overhead
Note: Touchdown mechanism notavailable on veneer or laminatefront Flip-Up overheads.
Note: Series 3 Horizon overheadsare only available in Knoll corefinishes.
Wallmount bracket specifiedseparately.
Options
Flip-Up Door Door OverheadTo specify overhead cabinetwithout locks replace the ‘‘L’’suffix from the pattern numberwith ‘‘N’’ Deduct $20. For 54(, 60(,66( and 72( overhead cabinetsDeduct $40
To specify Touchdown overheadcabinet, add ‘‘E’’ as the 2nd to lastdigit of the pattern numberExample:DS3PML48EL(Add $163 for cabinet widths of48( or less. Add $327 for cabinetwidths of 54( or greater).
Series 2 and Series 3 Flip-Up DoorOverhead Finish Option:Add a ‘‘Y’’ to the end of the patternnumber to specify a different finishfor the door versus the case. Use P3pricing for this dual finish option.
Dividends Horizon
178
Sliding Door Overheads149 High Panel-MountedDividends Horizon and Template Doors
description w * w d h pattern no. P1 P2 P3
Dividends Horizon Panel-MountedOverhead without Door
29 7/89 309 12 1/29 149 DS3PMNS3014 $447. $490. $514.
35 7/89 369 12 1/29 149 DS3PMNS3614 466. 512. 539.
41 7/89 429 12 1/29 149 DS3PMNS4214 479. 528. 550.
47 7/89 489 12 1/29 149 DS3PMNS4814 495. 546. 569.
59 7/89 609 12 1/29 149 DS3PMNS6014 567. 622. 652.
65 7/89 669 12 1/29 149 DS3PMNS6614 585. 642. 670.
71 7/89 729 12 1/29 149 DS3PMNS7214 597. 660. 691.
Template Panel-MountedSliding Door Overhead with Steel Doors
35 7/89: 369 159 149 DS3PMT(S/G)3614L 971. 1,069. 1,115.
41 7/89: 429 159 149 DS3PMT(S/G)4214L 1,007. 1,109. 1,156.
47 7/89: 489 159 149 DS3PMT(S/G)4814L 1,037. 1,140. 1,195.
59 7/89: 609 159 149 DS3PMT(S/G)6014L 1,480. 1,629. 1,703.
71 7/89: 729 159 149 DS3PMT(S/G)7214L 1,564. 1,722. 1,802.
Dividends Horizon Panel-MountedSliding Door Overhead w/Steel Door
29 7/89 309 13 1/29 149 DS3PMSS3014L 739. 815. 850.
35 7/89 369 13 1/29 149 DS3PMSS3614L 759. 836. 878.
41 7/89 429 13 1/29 149 DS3PMSS4214L 785. 865. 902.
47 7/89 489 13 1/29 149 DS3PMSS4814L 798. 879. 921.
59 7/89 609 13 1/29 149 DS3PMSS6014L 902. 993. 1,037.
65 7/89 669 13 1/29 149 DS3PMSS6614L 926. 1,020. 1,065.
71 7/89 729 13 1/29 149 DS3PMSS7214L 942. 1,035. 1,080.
Dividends Horizon Panel-MountedSliding Door Overhead w/ Laminate Door
29 7/89 309 13 1/29 149 DS3PMSL3014L 1,277. 1,403. 1,467.
35 7/89 369 13 1/29 149 DS3PMSL3614L 1,313. 1,439. 1,503.
41 7/89 429 13 1/29 149 DS3PMSL4214L 1,350. 1,480. 1,548.
47 7/89 489 13 1/29 149 DS3PMSL4814L 1,386. 1,518. 1,586.
59 7/89 609 13 1/29 149 DS3PMSL6014L 1,421. 1,560. 1,627.
65 7/89 669 13 1/29 149 DS3PMSL6614L 1,458. 1,599. 1,669.
71 7/89 729 13 1/29 149 DS3PMSL7214L 1,492. 1,635. 1,709.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Paint finish case3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead w/ SteelDoor
Example: DS3PMSS3014L/117/117
DS3PMSS3014L
Pattern Number
117 Dark grey paint finishcase
Included With
Sliding Door Overhead
Note: Sliding door overheads areonly available in Knoll corefinishes.
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock/No lockFor non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Overheads with Template styledoors only accept LED task light.
Dividends Horizon
179
Sto
rage
Com
pone
nts
Sliding Door Overheads149 High Panel-MountedDividends Horizon and Template Doors
description w * w d h pattern no. P1 P2 P3
Dividends Horizon Panel-MountedSliding Door Overhead w/ Veneer Door
29 7/89 309 13 1/29 149 DS3PMSV3014L $1,411. $1,548. $1,619.
35 7/89 369 13 1/29 149 DS3PMSV3614L 1,458. 1,598. 1,669.
41 7/89 429 13 1/29 149 DS3PMSV4214L 1,499. 1,647. 1,717.
47 7/89 489 13 1/29 149 DS3PMSV4814L 1,547. 1,700. 1,772.
59 7/89 609 13 1/29 149 DS3PMSV6014L 1,591. 1,748. 1,824.
65 7/89 669 13 1/29 149 DS3PMSV6614L 1,635. 1,795. 1,876.
71 7/89 729 13 1/29 149 DS3PMSV7214L 1,683. 1,847. 1,929.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Paint finish case3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead w/ SteelDoor
Example: DS3PMSS3014L/117/117
DS3PMSS3014L
Pattern Number
117 Dark grey paint finishcase
Included With
Sliding Door Overhead
Note: Sliding door overheads areonly available in Knoll corefinishes.
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock/No lockFor non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Overheads with Template styledoors only accept LED task light.
Dividends Horizon
180
Sliding Door Overheads219 High Panel-MountedDividends Horizon Full Height Door
description w * w d h pattern no. P1 P2 P3
Dividends Horizon Panel-MountedOverhead without Door
29 7/89 309 12 1/29 219 DS3PMNS3021 $616. $680. $711.
35 7/89 369 12 1/29 219 DS3PMNS3621 646. 706. 739.
41 7/89 429 12 1/29 219 DS3PMNS4221 666. 730. 762.
47 7/89 489 12 1/29 219 DS3PMNS4821 691. 757. 790.
59 7/89 609 12 1/29 219 DS3PMNS6021 785. 865. 902.
65 7/89 669 12 1/29 219 DS3PMNS6621 642. 705. 736.
71 7/89 729 12 1/29 219 DS3PMNS7221 831. 916. 955.
Dividends Horizon Panel-MountedSliding Door Overheadw/ Steel Door
29 7/89 309 13 1/29 219 DS3PMSS3021FL 963. 1,058. 1,107.
35 7/89 369 13 1/29 219 DS3PMSS3621FL 993. 1,092. 1,141.
41 7/89 429 13 1/29 219 DS3PMSS4221FL 1,029. 1,125. 1,179.
47 7/89 489 13 1/29 219 DS3PMSS4821FL 1,053. 1,156. 1,210.
59 7/89 609 13 1/29 219 DS3PMSS6021FL 1,207. 1,327. 1,389.
65 7/89 669 13 1/29 219 DS3PMSS6621FL 1,240. 1,362. 1,427.
71 7/89 729 13 1/29 219 DS3PMSS7221FL 1,266. 1,390. 1,453.
Dividends Horizon Panel-MountedSliding Door Overheadw/ Laminate Door
29 7/89 309 13 1/29 219 DS3PMSL3021FL 1,591. 1,748. 1,822.
35 7/89 369 13 1/29 219 DS3PMSL3621FL 1,638. 1,796. 1,879.
41 7/89 429 13 1/29 219 DS3PMSL4221FL 1,687. 1,849. 1,936.
47 7/89 489 13 1/29 219 DS3PMSL4821FL 1,739. 1,904. 1,987.
59 7/89 609 13 1/29 219 DS3PMSL6021FL 1,781. 1,959. 2,041.
65 7/89 669 13 1/29 219 DS3PMSL6621FL 1,827. 2,009. 2,097.
71 7/89 729 13 1/29 219 DS3PMSL7221FL 1,876. 2,060. 2,149.
Dividends Horizon Panel-MountedSliding Door Overheadw/ Veneer Door
29 7/89 309 13 1/29 219 DS3PMSV3021FL 1,734. 1,902. 1,986.
35 7/89 369 13 1/29 219 DS3PMSV3621FL 1,794. 1,973. 2,059.
41 7/89 429 13 1/29 219 DS3PMSV4221FL 1,862. 2,041. 2,134.
47 7/89 489 13 1/29 219 DS3PMSV4821FL 1,926. 2,115. 2,210.
59 7/89 609 13 1/29 219 DS3PMSV6021FL 1,989. 2,188. 2,284.
65 7/89 669 13 1/29 219 DS3PMSV6621FL 2,056. 2,259. 2,358.
71 7/89 729 13 1/29 219 DS3PMSV7221FL 2,124. 2,331. 2,434.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Paint finish case3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead w/ SteelDoorExample: DS3PMSS3021FL
/117/117
DS3PMSS3021FL
Pattern Number
117 Dark grey paint finishcase
Included With
Sliding Door Overhead
Note: Sliding door overheads areonly available in Knoll corefinishes.
Options
Sliding Door Overhead
Lock/No lockFor non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Dividends Horizon
181
Sto
rage
Com
pone
nts
Sliding Door Overheads219 High Panel-MountedDividends Horizon Partial Height Door
description w * w d h pattern number P1 P2 P3
Dividends Horizon Panel-MountedSliding Door Overheadw/ Steel Door
29 7/89 309 13 1/29 219 DS3PMSS3021PL $955. $1,053. $1,099.
35 7/89 369 13 1/29 219 DS3PMSS3621PL 989. 1,082. 1,136.
41 7/89 429 13 1/29 219 DS3PMSS4221PL 1,019. 1,117. 1,166.
47 7/89 489 13 1/29 219 DS3PMSS4821PL 1,043. 1,147. 1,202.
59 7/89 609 13 1/29 219 DS3PMSS6021PL 1,155. 1,271. 1,329.
65 7/89 669 13 1/29 219 DS3PMSS6621PL 1,195. 1,308. 1,366.
71 7/89 729 13 1/29 219 DS3PMSS7221PL 1,212. 1,331. 1,393.
Dividends Horizon Panel-MountedSliding Door Overheadw/ Laminate Door
29 7/89 309 13 1/29 219 DS3PMSL3021PL 1,580. 1,734. 1,808.
35 7/89 369 13 1/29 219 DS3PMSL3621PL 1,625. 1,784. 1,862.
41 7/89 429 13 1/29 219 DS3PMSL4221PL 1,671. 1,833. 1,916.
47 7/89 489 13 1/29 219 DS3PMSL4821PL 1,716. 1,884. 1,970.
59 7/89 609 13 1/29 219 DS3PMSL6021PL 1,766. 1,939. 2,024.
65 7/89 669 13 1/29 219 DS3PMSL6621PL 1,811. 1,988. 2,080.
71 7/89 729 13 1/29 219 DS3PMSL7221PL 1,857. 2,038. 2,133.
Dividends Horizon Panel-MountedSliding Door Overheadw/ Veneer Door
29 7/89 309 13 1/29 219 DS3PMSV3021PL 1,734. 1,902. 1,983.
35 7/89 369 13 1/29 219 DS3PMSV3621PL 1,784. 1,960. 2,043.
41 7/89 429 13 1/29 219 DS3PMSV4221PL 1,836. 2,019. 2,104.
47 7/89 489 13 1/29 219 DS3PMSV4821PL 1,894. 2,074. 2,167.
59 7/89 609 13 1/29 219 DS3PMSV6021PL 1,943. 2,133. 2,228.
65 7/89 669 13 1/29 219 DS3PMSV6621PL 1,990. 2,190. 2,287.
71 7/89 729 13 1/29 219 DS3PMSV7221PL 2,044. 2,251. 2,347.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Paint finish case3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead w/ SteelDoorExample: DS3PMSS3021PL
/117/117
DS3PMSS3021PL
Pattern Number
117 Dark grey paint finishcase
Included With
Sliding Door Overhead
Note: Sliding door overheads areonly available in Knoll corefinishes.
Options
Sliding Door Overhead
Lock/No lockFor non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Dividends Horizon
182
Sliding Door Overheads149 High Wall-MountedDividends Horizon and Template Doors
description w * w d h pattern no. P1 P2 P3
Dividends Horizon Wall-MountedSliding Door Overhead without Door
35 7/89 369 149 149 DS3WMN3614 $1,079. $1,190. $1,241.
42 7/89 429 149 149 DS3WMN4214 1,141. 1,262. 1,313.
47 7/89 489 149 149 DS3WMN4814 1,201. 1,317. 1,376.
59 7/89 609 149 149 DS3WMN6014 1,638. 1,802. 1,883.
71 7/89 729 149 149 DS3WMN7214 1,775. 1,958. 2,041.
Dividends Horizon Wall-MountedSliding Door Overheadw/ Steel Door
35 7/89 369 159 149 DS3WMSS3614L 1,356. 1,492. 1,560.
42 7/89 429 159 149 DS3WMSS4214L 1,426. 1,570. 1,639.
47 7/89 489 159 149 DS3WMSS4814L 1,483. 1,631. 1,705.
59 7/89 609 159 149 DS3WMSS6014L 1,936. 2,129. 2,228.
71 7/89 729 159 149 DS3WMSS7214L 2,082. 2,288. 2,394.
Dividends Horizon Wall-MountedSliding Door Overheadw/ Laminate Door
35 7/89 369 159 149 DS3WMSL3614L 1,811. 1,811. 1,811.
42 7/89 429 159 149 DS3WMSL4214L 1,879. 1,879. 1,879.
47 7/89 489 159 149 DS3WMSL4814L 1,943. 1,943. 1,943.
59 7/89 609 159 149 DS3WMSL6014L 2,412. 2,412. 2,412.
71 7/89 729 159 149 DS3WMSL7214L 2,571. 2,571. 2,571.
Dividends Horizon Wall-MountedSliding Door Overheadw/ Veneer Door
35 7/89 369 159 149 DS3WMSV3614L 2,101. 2,101. 2,101.
41 7/89 429 159 149 DS3WMSV4214L 2,178. 2,178. 2,178.
47 7/89 489 159 149 DS3WMSV4814L 2,269. 2,269. 2,269.
59 7/89 609 159 149 DS3WMSV6014L 2,746. 2,746. 2,746.
71 7/89 729 159 149 DS3WMSV7214L 2,936. 2,936. 2,932.
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Paint finish case3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead
Example: DS3WMSS4214N/118/118
DS3WM Pattern Number
SS Steel Door
42 Width
14 Height
N No lock
118 Bright White PaintFinish
118 Bright White PaintFinish
Included With
Sliding Door Overhead
Wall mount cleatHardware
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock Option:For non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Note: Sliding door overheads areonly available in Knoll corefinishes.
Overheads on this page accept LEDtask lights only.
Dividends Horizon
183
Sto
rage
Com
pone
nts
Sliding Door Overheads149 High Wall-MountedDividends Horizon and Template Doors
description w * w d h pattern no. P1 P2 P3
Template Wall-MountedSliding Door Overhead w/Steel or Glass Doors
35 7/89 369 159 149 DS3WMT(S/G)3614L $1,331. $1,469. $1,537.
42 7/89 429 159 149 DS3WMT(S/G)4214L 1,407. 1,548. 1,619.
47 7/89 489 159 149 DS3WMT(S/G)4814L 1,469. 1,610. 1,687.
59 7/89 609 159 149 DS3WMT(S/G)6014L 1,929. 2,124. 2,220.
71 7/89 729 159 149 DS3WMT(S/G)7214L 2,087. 2,298. 2,401.
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Paint finish case3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead
Example: DS3WMSS4214N/118/118
DS3WM Pattern Number
SS Steel Door
42 Width
14 Height
N No lock
118 Bright White PaintFinish
118 Bright White PaintFinish
Included With
Sliding Door Overhead
Wall mount cleatHardware
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock Option:For non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Note: Sliding door overheads areonly available in Knoll corefinishes.
Overheads on this page accept LEDtask lights only.
Dividends Horizon
184
Sliding Door Overheads149 High Shared Center-MountedDividends Horizon and Template Doors
description w * w d h pattern no. P1 P2 P3
Dividends Horizon Shared Top-MountedSliding Door Overhead without Door
35 7/89 369 149 149 DS3SMN3614 $1,448. $1,594. $1,668.
42 7/89 429 149 149 DS3SMN4214 1,510. 1,663. 1,741.
47 7/89 489 149 149 DS3SMN4814 1,557. 1,711. 1,789.
59 7/89 609 149 149 DS3SMN6014 1,841. 2,026. 2,120.
71 7/89 729 149 149 DS3SMN7214 1,924. 2,115. 2,212.
Template Shared Top-MountedSliding Door Overhead with Steel Doors
35 7/89 369 159 149 DS3SMT(S/G)3614L 1,712. 1,884. 1,970.
42 7/89 429 159 149 DS3SMT(S/G)4214L 1,784. 1,962. 2,049.
47 7/89 479 159 149 DS3SMT(S/G)4814L 1,824. 2,009. 2,097.
59 7/89 609 159 149 DS3SMT(S/G)6014L 2,129. 2,343. 2,448.
71 7/89 729 159 149 DS3SMT(S/G)7214L 2,253. 2,478. 2,589.
Dividends Horizon Shared Top-MountedSliding Door Overhead with Steel Door
35 7/89 369 159 149 DS3SMSS3614L 1,808. 1,988. 2,081.
42 7/89 429 159 149 DS3SMSS4214L 1,880. 2,068. 2,157.
47 7/89 489 159 149 DS3SMSS4814L 1,924. 2,115. 2,212.
59 7/89 609 159 149 DS3SMSS6014L 2,221. 2,444. 2,556.
71 7/89 729 159 149 DS3SMSS7214L 2,343. 2,575. 2,695.
Dividends Horizon Shared Top-MountedSliding Door Overhead with Laminate Door
35 7/89 369 159 149 DS3SMSL3614L 2,778. 2,778. 2,778.
42 7/89 429 159 149 DS3SMSL4214L 2,841. 2,841. 2,841.
47 7/89 489 159 149 DS3SMSL4814L 2,894. 2,894. 2,894.
59 7/89 609 159 149 DS3SMSL6014L 3,201. 3,201. 3,201.
71 7/89 729 159 149 DS3SMSL7214L 3,340. 3,340. 3,340.
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Case paint finish3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead
Example: DS3SMSS4214N/118/118
DS3SM Pattern Number
SS Steel Door
42 Width
14 Height
N No lock
118 Bright White PaintFinish
118 Bright White PaintFinish
Included With
Sliding Door Overhead
Hardware
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock Option:For non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price. Deduct$40.00 for shared overheads.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Note: Sliding door overheads areonly available in Knoll corefinishes.
Note: Center-mounted sliding dooroverheads mount on full view panelsonly and must mount on modulewith panel widths.
Overheads on this page accept LEDtask lights only.
Dividends Horizon
185
Sto
rage
Com
pone
nts
Sliding Door Overheads149 High Shared Center-MountedDividends Horizon and Template Doors
description w * w d h pattern no. P1 P2 P3
Dividends Horizon Shared Top-MountedSliding Door Overhead with Veneer Door
35 7/89 369 159 149 DS3SMSV3614L $3,357. $3,357. $3,357.
42 7/89 429 159 149 DS3SMSV4214L 3,442. 3,442. 3,442.
47 7/89 489 159 149 DS3SMSV4814L 3,540. 3,540. 3,540.
59 7/89 609 159 149 DS3SMSV6014L 3,867. 3,867. 3,867.
71 7/89 729 159 149 DS3SMSV7214L 4,062. 4,062. 4,062.
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Case paint finish3. Door finish
(laminate and veneer door only)4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead
Example: DS3SMSS4214N/118/118
DS3SM Pattern Number
SS Steel Door
42 Width
14 Height
N No lock
118 Bright White PaintFinish
118 Bright White PaintFinish
Included With
Sliding Door Overhead
Hardware
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock Option:For non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price. Deduct$40.00 for shared overheads.
Paint Configuration Option:
Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Note: Sliding door overheads areonly available in Knoll corefinishes.
Note: Center-mounted sliding dooroverheads mount on full view panelsonly and must mount on modulewith panel widths.
Overheads on this page accept LEDtask lights only.
Dividends Horizon
186
Sliding Door Overheads149 High Individual Center-MountedDividends Horizon Doors / Template Doors
description w * w d h pattern no. P1 P2 P3 LAM V1
Dividends Horizon Individual Center-MountedOverhead without Door
35 7/89 369 149 149 DS3CMN3614 $1,159. $1,275. $1,331.
41 7/89 429 149 149 DS3CMN4214 1,209. 1,330. 1,392.
47 7/89 489 149 149 DS3CMN4814 1,240. 1,362. 1,427.
59 7/89 609 149 149 DS3CMN6014 1,729. 1,901. 1,986.
71 7/89 729 149 149 DS3CMN7214 1,818. 2,004. 2,089.
Template Individual Center-MountedSliding Door Overhead with Steel Doors
35 7/89 369 159 149 DS3CMT(S/G)3614L 1,388. 1,527. 1,595.
42 7/89 429 159 149 DS3CMT(S/G)4214L 1,447. 1,591. 1,667.
47 7/89 489 159 149 DS3CMT(S/G)4814L 1,483. 1,631. 1,705.
59 7/89 609 159 149 DS3CMT(S/G)6014L 2,019. 2,220. 2,319.
71 7/89 729 159 149 DS3CMT(S/G)7214L 2,131. 2,344. 2,451.
Dividends Horizon IndividualCenter-Mounted Sliding DoorOverhead with Steel Doors
35 7/89 369 159 149 DS3CMSS3614L 1,531. 1,685. 1,760. 0. 0.
41 7/89 429 159 149 DS3CMSS4214L 1,588. 1,749. 1,828.
47 7/89 489 159 149 DS3CMSS4814L 1,631. 1,794. 1,879.
59 7/89 609 159 149 DS3CMSS6014L 1,958. 2,148. 2,250.
71 7/89 729 159 149 DS3CMSS7214L 2,067. 2,274. 2,377.
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Case paint finish3. Door finish4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead
Example: DS3CMTS4214N/118/118
DS3CM Pattern Number
T Template Style Door
S Steel Door
42 Width
14 Height
N No lock
118 Bright White PaintFinish
118 Bright White PaintFinish
Included With
Sliding Door Overhead
Hardware
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock Option:For non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Note: Sliding door overheads areonly available in Knoll corefinishes.
Note: Center-mounted sliding dooroverheads mount on full view panelsonly and must mount on modulewith panel widths.
Overheads on this page accept LEDtask lights only.
Dividends Horizon
187
Sto
rage
Com
pone
nts
Sliding Door Overheads149 High Individual Center-MountedDividends Horizon Doors / Template Doors
description w * w d h pattern no. P1 P2 P3 LAM V1
Dividends Horizon IndividualCenter-Mounted Sliding DoorOverhead with Laminate Doors
35 7/89 369 159 149 DS3CMSL3614L n/a n/a n/a $1,990. n/a
41 7/89 429 159 149 DS3CMSL4214L n/a n/a n/a 2,050. n/a
47 7/89 489 159 149 DS3CMSL4814L n/a n/a n/a 2,097. n/a
59 7/89 609 159 149 DS3CMSL6014L n/a n/a n/a 2,438. n/a
71 7/89 729 159 149 DS3CMSL7214L n/a n/a n/a 2,556. n/a
Dividends Horizon IndividualCenter-Mounted Sliding DoorOverhead with Veneer Doors
35 7/89 369 159 149 DS3CMSV3614L n/a n/a n/a n/a 2,280.
41 7/89 429 159 149 DS3CMSV4214L n/a n/a n/a n/a 2,349.
47 7/89 489 159 149 DS3CMSV4814L n/a n/a n/a n/a 2,424.
59 7/89 609 159 149 DS3CMSV6014L n/a n/a n/a n/a 2,763.
71 7/89 729 159 149 DS3CMSV7214L n/a n/a n/a n/a 2,915.
Ordering Information
Sliding Door Overheads:
1. Pattern number2. Case paint finish3. Door finish4. Door edge finish
(laminate door only)
Order Code
Sliding Door Overhead
Example: DS3CMTS4214N/118/118
DS3CM Pattern Number
T Template Style Door
S Steel Door
42 Width
14 Height
N No lock
118 Bright White PaintFinish
118 Bright White PaintFinish
Included With
Sliding Door Overhead
Hardware
Specify one of the following forTemplate Glass door option:(Temp) = Clear(GL13) = Powder(GL25) = Bronze(GL35) = Grey
Options
Sliding Door Overhead
Lock Option:For non-locking units substitute the‘‘L’’ suffix with a ‘‘N’’ and deduct$20.00 from the list price.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and sliding door.P3 pricing applies to all productswith dual paint finishes.
Note: Sliding door overheads areonly available in Knoll corefinishes.
Note: Center-mounted sliding dooroverheads mount on full view panelsonly and must mount on modulewith panel widths.
Overheads on this page accept LEDtask lights only.
Dividends Horizon
188
Up Mounted OverheadsDividends and Series 2
description w * w d h pattern no. P1 P2 P3 V1-P1 V1-P2 V1-P3
Series 2 Overhead Cabinet With Enclosed Backand Lock
309 29 7/89 14 1/89 159 DS2UM30L $1,004. $1,157. $1,203. $1,356. $1,507. $1,561.
369 35 7/89 14 1/89 159 DS2UM36L 1,035. 1,194. 1,244. 1,397. 1,559. 1,609.
429 41 7/89 14 1/89 159 DS2UM42L 1,071. 1,229. 1,284. 1,451. 1,616. 1,665.
489 47 7/89 14 1/89 159 DS2UM48L 1,090. 1,252. 1,307. 1,529. 1,695. 1,748.
549 53 7/89 14 1/89 159 DS2UM54L 1,464. 1,685. 1,756. 2,141. 2,363. 2,429.
609 59 7/89 14 1/89 159 DS2UM60L 1,464. 1,685. 1,756. 2,141. 2,363. 2,429.
669 65 7/89 14 1/89 159 DS2UM66L 1,529. 1,760. 1,838. 2,237. 2,470. 2,540.
729 71 7/89 14 1/89 159 DS2UM72L 1,529. 1,760. 1,838. 2,237. 2,470. 2,540.
Overhead Upmount Brackets (Pair) 7/89 12 3/169 11 3/49 DB1U18 108. 117. 122. n/a n/a n/a
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Upmount Overhead Cabinet
1. Pattern Number2. Paint Finish3. Door End Cap Finish
Series 2 Overhead Cabinet
1. Pattern Number2. Paint Finish
Order Code
Upmount Overhead Cabinet
Example: DS1E 30L, 113, 113
DS1E 30L Pattern Number
113 Dark grey paint finish
113 Dark grey end cap finish
Series 2 Overhead Cabinet
Example: DS2UM 30L, 115
DS2UM30L
Pattern Number
115 Medium grey paintfinish
Included with:
Upmount Overhead Cabinet
Series 2 Overhead Cabinet
Up Mount overheads include anenclosed back.
Up Mount brackets are required andmust be ordered separately.
Options
Upmount Overhead CabinetTo specify overhead cabinet withoutlocks, replace the ‘‘L’’ suffix fromthe pattern number with ‘‘N’’Deduct $20For 549, 609, 669 and729 overhead cabinets Deduct $40
To specify Touchdown overheadcabinet, add ‘‘E’’ as the 2nd to lastdigit of the pattern numberExample:DS3PML48EL(Add $163 for cabinet widths of48( or less. Add $327 for cabinetwidths of 54( or greater).
Series 2 Up Mount OverheadFinish Option:Add a ‘‘Y’’ to the end of the patternnumber to specify a front color thatis different than the case color. UseP3 pricing for this dual finishoption.
Dividends Horizon
189
Sto
rage
Com
pone
nts
Overhead Bookshelf71/49 High
description w * w d h pattern no. P1 P2 P3
Overhead Bookshelf 249 23 7/89 14 1/89 7 1/49 DS1S 24 $235. $263. $276.
309 29 7/89 14 1/89 7 1/49 DS1S 30 235. 263. 276.
369 35 7/89 14 1/89 7 1/49 DS1S 36 250. 263. 277.
429 41 7/89 14 1/89 7 1/49 DS1S 42 262. 277. 287.
489 47 7/89 14 1/89 7 1/49 DS1S 48 275. 284. 297.
549 53 7/89 14 1/89 7 1/49 DS1S 54 292. 310. 323.
609 59 7/89 14 1/89 7 1/49 DS1S 60 292. 310. 323.
669 65 7/89 14 1/89 7 1/49 DS1S 66 317. 337. 353.
729 71 7/89 14 1/89 7 1/49 DS1S 72 317. 337. 353.
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Overhead Bookshelf
1. Pattern Number2. Paint Finish
Order Code
Overhead Bookshelf
Example: DS1S 60, 113
DS1S 60 Pattern Number
113 Dark Grey Finish
Included with:
Note: An upcharge applies whenspecifying a Legacy laminate. SeeLegacy finish page for moreinformation.
Dividends Horizon
190
Mounting Brackets and AccessoriesOverhead Backstop, Wall-mount Brackets andCurrents Downmount Brackets
description w * w d h pattern no. black P1 P2 P3
Overhead Back Stop (Dark Grey Only) 249 23 11/169 5/89 1 7/169 DS1BS 24 $4. n/a n/a
309 29 11/169 5/89 1 7/169 DS1BS 30 4. n/a n/a
369 35 11/169 5/89 1 7/169 DS1BS 36 4. n/a n/a
429 41 11/169 5/89 1 7/169 DS1BS 42 8. n/a n/a
489 47 11/169 5/89 1 7/169 DS1BS 48 8. n/a n/a
549 53 11/169 5/89 1 7/169 DS1BS 54 12. n/a n/a
609 59 11/169 5/89 1 7/169 DS1BS 60 12. n/a n/a
669 65 11/169 5/89 1 7/169 DS1BS 66 12. n/a n/a
729 71 11/169 5/89 1 7/169 DS1BS 72 12. n/a n/a
149 H Overhead Wall-Mount Bracket 249 249 1/29 1 4 1/49 DS1WM 24 111. 117. 121. 124.
309 309 1/29 1 4 1/49 DS1WM 30 111. 117. 121. 124.
369 369 1/29 1 4 1/49 DS1WM 36 118. 122. 125. 135.
429 429 1/29 1 4 1/49 DS1WM 42 128. 136. 147. 152.
489 489 1/29 1 4 1/49 DS1WM 48 142. 151. 155. 161.
Overhead Shelf-Mount Bracket 309 309 1/29 79 DS1SWM 30 196. 210. 228.
369 369 1/29 79 DS1SWM 36 205. 231. 244.
429 429 1/29 79 DS1SWM 42 228. 254. 262.
489 489 1/29 79 DS1SWM 48 249. 270. 277.
Dividends Series 2 Downmount Brackets (ForCurrents spine use)
249 DSCSWDB24 360. n/a n/a
309 DSCSWDB30 372. n/a n/a
369 DSCSWDB36 381. n/a n/a
429 DSCSWDB42 393. n/a n/a
489 DSCSWDB48 402. n/a n/a
w* = nominal widthDimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Overhead Wall-Mount Bracket
1. Pattern Number
Overhead Back Stop
1. Pattern Number
Order Code
Overhead Wall-Mount Bracket
Example: DS1WM 30
DS1WM30
Pattern Number
Overhead Back Stop
Example: DB1BS 30
DB1BS 30 Pattern Number
Included with:
Overhead Wall-Mount Bracket
Overhead Back Stop
Options
Overhead Wall-Mount Bracket
Overhead Back Stop
Dividends Horizon
191
Sto
rage
Com
pone
nts
Mounting Brackets and AccessoriesUpmount Brackets, Vertical Dividersand Lock Retrofit Kit
description pattern no. black P1 P2 P3
Vertical Dividers (for flip-up overheads and openshelves)Package of 4
DS1 VD $155. $161. $167. $174.
Overhead Cabinet Lock Retrofit Kit DS1 OHL 88. n/a n/a n/a
Overhead Upmount Brackets (Pair) DB1U18 n/a 108. 117. 122.
Ordering Information
Vertical Dividers
1. Pattern Number
Order Code
Vertical Dividers
Example: DS1 VD
Included with:
Vertical Dividers(4) Vertical dividers
Options
Vertical Dividers
Dividends Horizon
192
Task LightsCord Management Clip
description type w d h pattern no. list
LED Task Light Use with 369 and wider overhead (48 LED’s) 319 29 1/29 DL4L31 $1,161.
Use with 449 and wider overhead (72 LED’s) 449 29 1/29 DL4L44 1,515.
Use with 669 and wider overhead (96 LED’s) 589 29 1/29 DL4L58 1,899.
Use with 249 and wider overhead (24 LED’s) 179 29 1/29 DL4L17 695.
Cord management clip (package of 50) DL3TC 67.
Ordering Information
Task Lights
1. Pattern Number
Cord Management Clip
1. Pattern Number
Order Code
LED Task Light
Example: DL4L17
DL4 Task Light
L LED
17 Width
Included with:
LED Task Lights:Includes LED’s, power supply with9-12’ cord and mounting hardware.Housings are clear anodizedaluminum with white colorend-caps.
Cord Management Clips:Additional clips must be orderedseparately.
Options
LED Task Lights:Power cord is able to attach to eitherend of fixture.
Notes:All task lights mount into the recessin the underside of overheadcabinets and shelves at least 69
wider than task light width.
All task lights are TCLP compliantand meet requirements of CaliforniaTitle 20 and Title 24.
Dividends Horizon
193
Sto
rage
Com
pone
nts
PedestalsSeries 2 Floorstanding, Doublewide and Mobile189, 249 and 309 Depths
description type d* d w h pattern no. P1 P2 P3
Series 2 Floorstanding Pedestals with Locks 6/6/12 w/back 189 17 1/29 14 7/89 26 7/89 DS2PF L18A $904. $1,038. $1,084.
12/12 w/back 189 17 1/29 14 7/89 26 7/89 DS2PF L18B 868. 1,000. 1,042.
6/6/12 no back 249 23 1/29 14 7/89 26 7/89 DS2PF L24A 774. 893. 928.
6/6/12 no back 249 23 1/29 14 7/89 26 7/89 DS2PF L24AB 912. 1,050. 1,089.
12/12 no back 249 23 1/29 14 7/89 26 7/89 DS2PF L24B 734. 844. 879.
12/12 no back 249 23 1/29 14 7/89 26 7/89 DS2PF L24BB 872. 1,001. 1,040.
6/6/12 w/back 309 29 1/29 14 7/89 26 7/89 DS2PF L30A 1,042. 1,199. 1,255.
12/12 w/back 309 29 1/29 14 7/89 26 7/89 DS2PF L30B 996. 1,144. 1,194.
Series 2 Floorstanding Case Back (For 249 deepunits only)
14 7/89 26 7/89 DS2XPB 138. 157. 161.
d* = nominal depthDimensions listed under d w h are actual to the nearest 1/169
Ordering Information
Pedestals
1. Pattern Number2. Paint Finish
Order Code
Floorstanding Pedestals
Example: DS2PF L24AB, 117
DS2PFL24AB
Pattern Number
117 Soft Grey paint finish
Doublewide Pedestals
Example: DS2DW 30L, 113
DS2DW30L
Pattern Number
113 Dark grey paint finish
Included with:
Floorstanding Pedestals
• Hanging file bar not included
Note: 249 deep floorstandingpedestals ending in 24A or 24B donot include a back panel. Backpanels must be ordered separately.Floorstanding pedestals includefinished back.
Mobile Pedestals
• Hanging file bar not included
Doublewide Pedestals
• Hanging File Bar (front-to-back)• Hanging file rail (side-to-side)
Doublewide pedestals are notintended for freestanding use andmust be secured beneath a panelsupported worksurface.
Options
Floorstanding Pedestals
• To specify pedestals withoutlocks, replace the ‘‘L’’suffix withan ‘‘N’’. Deduct $15
Doublewide Pedestals
• To specify pedestals withoutlocks, replace the ‘‘L’’suffix withan ‘‘N’’. Deduct $20
Mobile Pedestals
• To specify a Series 2 mobilepedestal without a steel top,replace ‘‘M’’ character with ‘‘O’’in the pattern number ie.DS2P(O)L24A Deduct $35
• Add $55 list for mobile handle.Add a ‘‘P’’ between the ‘‘L’’ lockcode and the case size todesignate the handle option,example (DS2PMLP24A)
Finish Option:Add a ‘‘Y’’ to the end of the patternnumber to specify a different finishfor the door versus the case. Use P3pricing for this dual finish option.
Full Extension Drawer SlideOptionTo specify full extension drawerslides for box drawers, add ‘‘F’’ atthe end of the pattern number andadd $25 to the list price.
Dividends Horizon
194
PedestalsSeries 2 Floorstanding, Doublewide and Mobile189, 249 and 309 Depths
description type d* d w h pattern no. P1 P2 P3
Series 2 Mobile Pedestals with Locks 6/6/12 189 16 3/49 14 7/89 26 3/89 DS2PM L18A $1,312. $1,504. $1,570.
12/12 189 16 3/49 14 7/89 26 3/89 DS2PM L18B 1,268. 1,462. 1,525.
6/12 189 16 3/49 14 7/89 20 5/89 DS2PM L18F 1,165. 1,343. 1,399.
6/6/12 249 22 3/49 14 7/89 26 3/89 DS2PM L24A 1,088. 1,257. 1,312.
12/12 249 22 3/49 14 7/89 26 3/89 DS2PM L24B 1,088. 1,257. 1,312.
6/12 249 22 3/49 14 7/89 20 5/89 DS2PM L24F 978. 1,123. 1,169.
Series 2 Doublewide Pedestals with Locks 12/12 199 18 3/49 309 26 7/89 DS2DW 30L 1,368. 1,575. 1,643.
12/12 199 18 3/49 369 26 7/89 DS2DW 36L 1,445. 1,665. 1,736.
d* = nominal depthDimensions listed under d w h are actual to the nearest 1/169
Ordering Information
Pedestals
1. Pattern Number2. Paint Finish
Order Code
Floorstanding Pedestals
Example: DS2PF L24AB, 117
DS2PFL24AB
Pattern Number
117 Soft Grey paint finish
Doublewide Pedestals
Example: DS2DW 30L, 113
DS2DW30L
Pattern Number
113 Dark grey paint finish
Included with:
Floorstanding Pedestals
• Hanging file bar not included
Note: 249 deep floorstandingpedestals ending in 24A or 24B donot include a back panel. Backpanels must be ordered separately.Floorstanding pedestals includefinished back.
Mobile Pedestals
• Hanging file bar not included
Doublewide Pedestals
• Hanging File Bar (front-to-back)• Hanging file rail (side-to-side)
Doublewide pedestals are notintended for freestanding use andmust be secured beneath a panelsupported worksurface.
Options
Floorstanding Pedestals
• To specify pedestals withoutlocks, replace the ‘‘L’’suffix withan ‘‘N’’. Deduct $15
Doublewide Pedestals
• To specify pedestals withoutlocks, replace the ‘‘L’’suffix withan ‘‘N’’. Deduct $20
Mobile Pedestals
• To specify a Series 2 mobilepedestal without a steel top,replace ‘‘M’’ character with ‘‘O’’in the pattern number ie.DS2P(O)L24A Deduct $35
• Add $55 list for mobile handle.Add a ‘‘P’’ between the ‘‘L’’ lockcode and the case size todesignate the handle option,example (DS2PMLP24A)
Finish Option:Add a ‘‘Y’’ to the end of the patternnumber to specify a different finishfor the door versus the case. Use P3pricing for this dual finish option.
Full Extension Drawer SlideOptionTo specify full extension drawerslides for box drawers, add ‘‘F’’ atthe end of the pattern number andadd $25 to the list price.
Dividends Horizon
195
Sto
rage
Com
pone
nts
PedestalsAccessoriesDrawer Organizers, Grommet Kits and Lock Retrofit Kits
description type w d h pattern no. list
Pencil Tray Black finish 13 1/49 5 7/89 7/89 DS2PPTN $56.
Clear finish 13 1/49 5 7/89 7/89 DS2PPTC 66.
Hanging File Bar 12 3/169 2 15/169 1/29 DS1PFS 50.
Drawer Divider, Box version 1 (shown) 12 3/89 39 3 1/89 DS1PBD 50.
version 2 4 7/1699 2 1/49 4 1/49 DS2PBD 88.
Drawer Divider, File version 1 (shown) 10 3 5/89 6 3/89 DS1PFD 50.
version 2 11 7/8 2 1/49 9 1/89 DS2PFD 94.
Stationary Inserts, box (4 trays) 13 15/169 8 7/89 DS1PST 263.
Pencil Drawer 249 17 5/89 29 DS1PCD 349.
Worksurface Grommet Kit (Dark Grey) 2 3/169 2 5/169 1 3/89 D1WSG 36.
Dividends Floorstanding Pedestal Lock RetrofitKit
DS1LKKT 108.
Series 2 Floorstanding Pedestal Lock Retrofit Kit 249 ped only DS2LKKT 90.
Dividends Doublewide Pedestal Lock Retrofit Kit DS1DWDPL 97.
Ordering Information
Pencil Tray
1. Pattern Number
Order Code
Pencil Tray
Example: DS2PPT
DS2PPT Pattern Number
Specification Information
Version 1 drawer dividers andstationary inserts are compatiblewith all pedestals shipped prior toMarch 21, 2022, all 249 deeppedestals without finished back, andall 249 deep mobile pedestals.
Version 2 drawer dividers arecompatible with 189 deep mobilepedestals and floorstandingpedestals with finished backshipped after March 21, 2022.
Stationary inserts are notcompatible with 189 deep mobilepedestals or floorstanding pedestalswith finished back shipped on orafter March 21, 2022.
DS1PFS file support channel iscompatible with 249 deep mobilepedestals and floorstandingpedestals without finished back.
Options
Dividends Horizon
196
PedestalsAccessoriesDrawer Organizers, Grommet Kits and Lock Retrofit Kits
description type w d h pattern no. list
Series 2 Doublewide Pedestal Lock Retrofit Kit 309 DS2DWDPL30 $94.
369 DS2DWDPL36 97.
Ordering Information
Pencil Tray
1. Pattern Number
Order Code
Pencil Tray
Example: DS2PPT
DS2PPT Pattern Number
Specification Information
Version 1 drawer dividers andstationary inserts are compatiblewith all pedestals shipped prior toMarch 21, 2022, all 249 deeppedestals without finished back, andall 249 deep mobile pedestals.
Version 2 drawer dividers arecompatible with 189 deep mobilepedestals and floorstandingpedestals with finished backshipped after March 21, 2022.
Stationary inserts are notcompatible with 189 deep mobilepedestals or floorstanding pedestalswith finished back shipped on orafter March 21, 2022.
DS1PFS file support channel iscompatible with 249 deep mobilepedestals and floorstandingpedestals without finished back.
Options
Dividends Horizon
197
Sto
rage
Com
pone
nts
CredenzasSingle Depth with Steel TopWith or Without a Sliding Door
description w h d pattern no. P1 P2 P3
Credenza without Door 429 249 13 5/169 DS4LC1ANS42N $968. $1,063. $1,112.
489 249 13 5/169 DS4LC1ANS48N 993. 1,091. 1,143.
549 249 13 5/169 DS4LC1ANS54N 1,106. 1,219. 1,275.
609 249 13 5/169 DS4LC1ANS60N 1,118. 1,231. 1,287.
669 249 13 5/169 DS4LC1ANS66N 1,152. 1,266. 1,323.
729 249 13 5/169 DS4LC1ANS72N 1,200. 1,318. 1,373.
Credenza withSteel Sliding Door
429 249 13 5/169 DS4LC1BSS42L 1,199. 1,315. 1,370.
489 249 13 5/169 DS4LC1BSS48L 1,220. 1,344. 1,403.
549 249 13 5/169 DS4LC1BSS54L 1,357. 1,495. 1,560.
609 249 13 5/169 DS4LC1BSS60L 1,364. 1,505. 1,570.
669 249 13 5/169 DS4LC1BSS66L 1,407. 1,548. 1,620.
729 249 13 5/169 DS4LC1BSS72L 1,458. 1,596. 1,670.
Credenza withLaminate Sliding Door
429 249 13 5/169 DS4LC1BLS42L 1,942. 2,135. 2,229.
489 249 13 5/169 DS4LC1BLS48L 1,990. 2,185. 2,281.
549 249 13 5/169 DS4LC1BLS54L 2,034. 2,236. 2,335.
609 249 13 5/169 DS4LC1BLS60L 2,081. 2,286. 2,386.
669 249 13 5/169 DS4LC1BLS66L 2,130. 2,338. 2,441.
729 249 13 5/169 DS4LC1BLS72L 2,177. 2,386. 2,496.
Credenza withVeneer Sliding Door
429 249 13 5/169 DS4LC1BVS42L 2,070. 2,275. 2,378.
489 249 13 5/169 DS4LC1BVS48L 2,130. 2,338. 2,440.
549 249 13 5/169 DS4LC1BVS54L 2,187. 2,401. 2,508.
609 249 13 5/169 DS4LC1BVS60L 2,244. 2,465. 2,575.
669 249 13 5/169 DS4LC1BVS66L 2,302. 2,528. 2,639.
729 249 13 5/169 DS4LC1BVS72L 2,358. 2,588. 2,706.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with Sliding Door:
1. Pattern number2. Paint finish3. Door finish
(laminate and veneer only)4. Door edge finish
(laminate only)
Credenza without Sliding Door:
1. Pattern number2. Paint finish
Order Code
Credenza with Sliding Door:
Example: DS4LC1BSS42L /117
DS4LC1BSS42L
Pattern Number
117 Dark grey paint
Credenza without a Sliding Door:
Example: DS4LC1ANS42N /117
DS4LC1ANS42N
Pattern Number
117 Dark grey paint
Included with:
Credenza with or without SlidingDoor:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with or without SlidingDoor:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $20 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
198
CredenzasSingle Depth with Steel TopWithout a Sliding Door and with a Drawer
description w h d pattern no. P1 P2 P3
Credenza with Steel Drawer 429 249 13 5/169 DS4LC1CSS42L $1,455. $1,546. $1,596.
489 249 13 5/169 DS4LC1CSS48L 1,475. 1,573. 1,623.
549 249 13 5/169 DS4LC1CSS54L 1,591. 1,702. 1,755.
609 249 13 5/169 DS4LC1CSS60L 1,603. 1,713. 1,770.
669 249 13 5/169 DS4LC1CSS66L 1,631. 1,749. 1,807.
729 249 13 5/169 DS4LC1CSS72L 1,680. 1,802. 1,862.
Credenza with Laminate Drawer 429 249 13 5/169 DS4LC1CLS42L 1,720. 1,815. 1,867.
489 249 13 5/169 DS4LC1CLS48L 1,746. 1,841. 1,890.
549 249 13 5/169 DS4LC1CLS54L 1,862. 1,970. 2,026.
609 249 13 5/169 DS4LC1CLS60L 1,872. 1,984. 2,037.
669 249 13 5/169 DS4LC1CLS66L 1,905. 2,020. 2,074.
729 249 13 5/169 DS4LC1CLS72L 1,947. 2,069. 2,130.
Credenza with Veneer Drawer 429 249 13 5/169 DS4LC1CVS42L 1,778. 1,874. 1,923.
489 249 13 5/169 DS4LC1CVS48L 1,805. 1,903. 1,953.
549 249 13 5/169 DS4LC1CVS54L 1,916. 2,028. 2,082.
609 249 13 5/169 DS4LC1CVS60L 1,928. 2,041. 2,097.
669 249 13 5/169 DS4LC1CVS66L 1,962. 2,074. 2,134.
729 249 13 5/169 DS4LC1CVS72L 2,006. 2,129. 2,187.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with a Drawer:
1. Pattern number2. Paint finish3. Drawer front finish
(laminate and veneer only)4. Drawer front edge finish
(laminate only)
Order Code
Credenza with a Drawer:
Example: DS4LC1CLS42L/117/118/118
DS4LC1CLS42L
Pattern Number
117 Dark grey paint
118 Bright white drawer front
118 Bright white drawer frontedge
Included with:
Credenza with a Drawer:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with a Drawer:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $20 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
199
Sto
rage
Com
pone
nts
CredenzasSingle Depth with Steel TopWith a Sliding Door and with a Drawer
description w h d pattern no. P1 P2 P3
Credenza with Steel Sliding Doorand Drawer
429 249 13 5/169 DS4LC1DSS42L $1,679. $1,801. $1,860.
489 249 13 5/169 DS4LC1DSS48L 1,704. 1,826. 1,883.
549 249 13 5/169 DS4LC1DSS54L 1,838. 1,976. 2,041.
609 249 13 5/169 DS4LC1DSS60L 1,850. 1,987. 2,054.
669 249 13 5/169 DS4LC1DSS66L 1,887. 2,030. 2,101.
729 249 13 5/169 DS4LC1DSS72L 1,937. 2,075. 2,154.
Credenza with Laminate Sliding Doorand Drawer
429 249 13 5/169 DS4LC1DLS42L 2,427. 2,617. 2,708.
489 249 13 5/169 DS4LC1DLS48L 2,474. 2,668. 2,763.
549 249 13 5/169 DS4LC1DLS54L 2,516. 2,716. 2,819.
609 249 13 5/169 DS4LC1DLS60L 2,563. 2,767. 2,871.
669 249 13 5/169 DS4LC1DLS66L 2,609. 2,822. 2,926.
729 249 13 5/169 DS4LC1DLS72L 2,659. 2,871. 2,978.
Credenza with Veneer Sliding Doorand Drawer
429 249 13 5/169 DS4LC1DVS42L 2,553. 2,758. 2,862.
489 249 13 5/169 DS4LC1DVS48L 2,609. 2,822. 2,924.
549 249 13 5/169 DS4LC1DVS54L 2,670. 2,883. 2,991.
609 249 13 5/169 DS4LC1DVS60L 2,724. 2,945. 3,057.
669 249 13 5/169 DS4LC1DVS66L 2,781. 3,011. 3,121.
729 249 13 5/169 DS4LC1DVS72L 2,840. 3,073. 3,188.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with a Sliding Door anda Drawer:
1. Pattern number2. Paint finish3. Drawer/Door finish
(laminate and veneer only)4. Drawer/Door edge finish
(laminate only)
Order Code
Credenza with a Sliding Door anda Drawer:Example: DS4LC1DSS42L /117
DS4LC1DSS42L
Pattern Number
117 Dark grey paint
Included with:
Credenza with a Sliding Door anda Drawer:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with a Sliding Door anda Drawer:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $40 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
200
CredenzasSingle Depth with Laminate TopWith or without a Sliding Door
description w h d pattern no. P1 P2 P3
Credenza without Door 249 249 13 5/169 DS4LC1ANL24N $1,302. $1,428. $1,498.
309 249 13 5/169 DS4LC1ANL30N 1,302. 1,428. 1,498.
369 249 13 5/169 DS4LC1ANL36N 1,302. 1,428. 1,498.
429 249 13 5/169 DS4LC1ANL42N 1,302. 1,428. 1,498.
489 249 13 5/169 DS4LC1ANL48N 1,339. 1,472. 1,541.
549 249 13 5/169 DS4LC1ANL54N 1,441. 1,588. 1,660.
609 249 13 5/169 DS4LC1ANL60N 1,443. 1,591. 1,662.
669 249 13 5/169 DS4LC1ANL66N 1,495. 1,645. 1,717.
729 249 13 5/169 DS4LC1ANL72N 1,544. 1,701. 1,774.
Credenza with Steel Sliding Door 309 249 13 5/169 DS4LC1BSL30L 1,516. 1,665. 1,741.
369 249 13 5/169 DS4LC1BSL36L 1,516. 1,665. 1,741.
429 249 13 5/169 DS4LC1BSL42L 1,516. 1,665. 1,741.
489 249 13 5/169 DS4LC1BSL48L 1,550. 1,707. 1,786.
549 249 13 5/169 DS4LC1BSL54L 1,685. 1,857. 1,937.
609 249 13 5/169 DS4LC1BSL60L 1,686. 1,860. 1,940.
669 249 13 5/169 DS4LC1BSL66L 1,741. 1,914. 2,000.
729 249 13 5/169 DS4LC1BSL72L 1,790. 1,969. 2,059.
Credenza with Laminate Sliding Door 309 249 13 5/169 DS4LC1BLL30L 2,111. 2,318. 2,423.
369 249 13 5/169 DS4LC1BLL36L 2,111. 2,318. 2,423.
429 249 13 5/169 DS4LC1BLL42L 2,111. 2,318. 2,423.
489 249 13 5/169 DS4LC1BLL48L 2,177. 2,386. 2,498.
549 249 13 5/169 DS4LC1BLL54L 2,243. 2,464. 2,572.
609 249 13 5/169 DS4LC1BLL60L 2,309. 2,537. 2,647.
669 249 13 5/169 DS4LC1BLL66L 2,376. 2,607. 2,723.
729 249 13 5/169 DS4LC1BLL72L 2,439. 2,682. 2,803.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with Sliding Door:
1. Pattern number2. Paint finish3. Top finish4. Top edge finish5. Door finish
(laminate and veneer only)6. Door edge finish
(laminate only)
Credenza without Sliding Door:
1. Pattern number2. Paint finish3. Top finish4. Top edge finish
Order Code
Credenza with Sliding Door:
Example: DS4LC1BLL42L/117/118/117/118/118
DS4LC1BLL42L
Pattern Number
117 Dark grey paint
118 Bright white top
117 Dark grey top edge
118 Bright white door
118 Bright white door edge
Credenza without a Sliding Door:
Example: DS4LC1ANL42N /117
DS4LC1ANL42N
Pattern Number
117 Dark grey paint
118 Bright white top
117 Dark grey top edge
Included with:
Credenza with or without SlidingDoor:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with or without SlidingDoor:
Lock/No lock optionFor non-locking credenzas withsliding door or a drawer, substitutethe ‘‘L’’ suffix with a ‘‘N’’ and deduct$20. from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
201
Sto
rage
Com
pone
nts
CredenzasSingle Depth with Laminate TopWith or without a Sliding Door
description w h d pattern no. P1 P2 P3
Credenza with Veneer Sliding Door 309 249 13 5/169 DS4LC1BVL30L $2,243. $2,464. $2,575.
369 249 13 5/169 DS4LC1BVL36L 2,243. 2,464. 2,575.
429 249 13 5/169 DS4LC1BVL42L 2,243. 2,464. 2,575.
489 249 13 5/169 DS4LC1BVL48L 2,319. 2,548. 2,661.
549 249 13 5/169 DS4LC1BVL54L 2,391. 2,632. 2,750.
609 249 13 5/169 DS4LC1BVL60L 2,473. 2,715. 2,836.
669 249 13 5/169 DS4LC1BVL66L 2,548. 2,798. 2,926.
729 249 13 5/169 DS4LC1BVL72L 2,624. 2,883. 3,013.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with Sliding Door:
1. Pattern number2. Paint finish3. Top finish4. Top edge finish5. Door finish
(laminate and veneer only)6. Door edge finish
(laminate only)
Credenza without Sliding Door:
1. Pattern number2. Paint finish3. Top finish4. Top edge finish
Order Code
Credenza with Sliding Door:
Example: DS4LC1BLL42L/117/118/117/118/118
DS4LC1BLL42L
Pattern Number
117 Dark grey paint
118 Bright white top
117 Dark grey top edge
118 Bright white door
118 Bright white door edge
Credenza without a Sliding Door:
Example: DS4LC1ANL42N /117
DS4LC1ANL42N
Pattern Number
117 Dark grey paint
118 Bright white top
117 Dark grey top edge
Included with:
Credenza with or without SlidingDoor:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with or without SlidingDoor:
Lock/No lock optionFor non-locking credenzas withsliding door or a drawer, substitutethe ‘‘L’’ suffix with a ‘‘N’’ and deduct$20. from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
202
CredenzasSingle Depth with Laminate TopWithout a Sliding Door and with a Drawer
description w h d pattern no. P1 P2 P3
Credenza with Steel Drawer 309 249 13 5/169 DS4LC1CSL30L $1,786. $1,912. $1,979.
369 249 13 5/169 DS4LC1CSL36L 1,786. 1,912. 1,979.
429 249 13 5/169 DS4LC1CSL42L 1,786. 1,912. 1,979.
489 249 13 5/169 DS4LC1CSL48L 1,821. 1,955. 2,022.
549 249 13 5/169 DS4LC1CSL54L 1,924. 2,069. 2,144.
609 249 13 5/169 DS4LC1CSL60L 1,926. 2,070. 2,145.
669 249 13 5/169 DS4LC1CSL66L 1,976. 2,127. 2,200.
729 249 13 5/169 DS4LC1CSL72L 2,026. 2,181. 2,256.
Credenza with Laminate Drawer 309 249 13 5/169 DS4LC1CLL30L 2,056. 2,181. 2,250.
369 249 13 5/169 DS4LC1CLL36L 2,056. 2,181. 2,250.
429 249 13 5/169 DS4LC1CLL42L 2,056. 2,181. 2,250.
489 249 13 5/169 DS4LC1CLL48L 2,090. 2,223. 2,292.
549 249 13 5/169 DS4LC1CLL54L 2,196. 2,338. 2,417.
609 249 13 5/169 DS4LC1CLL60L 2,198. 2,339. 2,418.
669 249 13 5/169 DS4LC1CLL66L 2,245. 2,391. 2,471.
729 249 13 5/169 DS4LC1CLL72L 2,297. 2,451. 2,527.
Credenza with Veneer Drawer 309 249 13 5/169 DS4LC1CVL30L 2,114. 2,240. 2,308.
369 249 13 5/169 DS4LC1CVL36L 2,114. 2,240. 2,308.
429 249 13 5/169 DS4LC1CVL42L 2,114. 2,240. 2,308.
489 249 13 5/169 DS4LC1CVL48L 2,148. 2,280. 2,351.
549 249 13 5/169 DS4LC1CVL54L 2,253. 2,394. 2,473.
609 249 13 5/169 DS4LC1CVL60L 2,255. 2,396. 2,474.
669 249 13 5/169 DS4LC1CVL66L 2,306. 2,452. 2,528.
729 249 13 5/169 DS4LC1CVL72L 2,355. 2,508. 2,582.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with a Drawer:
1. Pattern number2. Paint finish3. Top finish4. Top edge finish5. Drawer finish
(laminate and veneer only)6. Drawer edge finish
(laminate only)
Order Code
Credenza with a Drawer:
Example: DS4LC1CSL42L/117/118/117
DS4LC1CSL42L
Pattern Number
117 Dark grey paint
118 Bright white top
117 Dark grey top edge
Included with:
Credenza with a Drawer:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with a Drawer:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $20 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
203
Sto
rage
Com
pone
nts
CredenzasSingle Depth with Laminate TopWith a Sliding Door and with a Drawer
description w d h pattern no. P1 P2 P3
Credenza with Steel Sliding Doorand Drawer
309 13 5/169 249 DS4LC1DSL30L $1,995. $2,148. $2,223.
369 13 5/169 249 DS4LC1DSL36L 1,995. 2,148. 2,223.
429 13 5/169 249 DS4LC1DSL42L 1,995. 2,148. 2,223.
489 13 5/169 249 DS4LC1DSL48L 2,033. 2,192. 2,267.
549 13 5/169 249 DS4LC1DSL54L 2,167. 2,335. 2,421.
609 13 5/169 249 DS4LC1DSL60L 2,168. 2,336. 2,424.
669 13 5/169 249 DS4LC1DSL66L 2,223. 2,394. 2,485.
729 13 5/169 249 DS4LC1DSL72L 2,272. 2,451. 2,541.
Credenza with Laminate Sliding Doorand Drawer
309 13 5/169 249 DS4LC1DLL30L 2,592. 2,803. 2,905.
369 13 5/169 249 DS4LC1DLL36L 2,592. 2,803. 2,905.
429 13 5/169 249 DS4LC1DLL42L 2,592. 2,803. 2,905.
489 13 5/169 249 DS4LC1DLL48L 2,659. 2,871. 2,979.
549 13 5/169 249 DS4LC1DLL54L 2,723. 2,943. 3,056.
609 13 5/169 249 DS4LC1DLL60L 2,791. 3,016. 3,131.
669 13 5/169 249 DS4LC1DLL66L 2,857. 3,090. 3,209.
729 13 5/169 249 DS4LC1DLL72L 2,919. 3,164. 3,279.
Credenza with Veneer Sliding Doorand Drawer
309 13 5/169 249 DS4LC1DVL30L 2,723. 2,943. 3,057.
369 13 5/169 249 DS4LC1DVL36L 2,723. 2,943. 3,057.
429 13 5/169 249 DS4LC1DVL42L 2,723. 2,943. 3,057.
489 13 5/169 249 DS4LC1DVL48L 2,804. 3,029. 3,146.
549 13 5/169 249 DS4LC1DVL54L 2,878. 3,111. 3,231.
609 13 5/169 249 DS4LC1DVL60L 2,952. 3,199. 3,319.
669 13 5/169 249 DS4LC1DVL66L 3,029. 3,277. 3,412.
729 13 5/169 249 DS4LC1DVL72L 3,106. 3,366. 3,494.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with a Sliding Door anda Drawer:
1. Pattern number2. Paint finish3. Top finish4. Top edge finish5. Drawer/Door finish
(laminate and veneer only)6. Drawer/Door edge finish
(laminate only)
Order Code
Credenza with a Sliding Door anda Drawer:Example: DS4LC1DSL42L
/117/118/117
DS4LC1DSL42L
Pattern Number
117 Dark grey paint
118 Bright white top
117 Dark grey top edge
Included with:
Credenza with a Sliding Door anda Drawer:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with a Sliding Door anda Drawer:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $40 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
204
CredenzasSingle Depth with Veneer TopWith or without a Sliding Door
description w h d pattern no. P1 P2 P3
Credenza without Door 249 249 13 5/169 DS4LC1ANV24N $1,992. $2,195. $2,294.
309 249 13 5/169 DS4LC1ANV30N 1,992. 2,195. 2,294.
369 249 13 5/169 DS4LC1ANV36N 1,992. 2,195. 2,294.
429 249 13 5/169 DS4LC1ANV42N 1,992. 2,195. 2,294.
489 249 13 5/169 DS4LC1ANV48N 2,038. 2,245. 2,350.
549 249 13 5/169 DS4LC1ANV54N 2,089. 2,301. 2,402.
609 249 13 5/169 DS4LC1ANV60N 2,138. 2,352. 2,460.
669 249 13 5/169 DS4LC1ANV66N 2,185. 2,402. 2,512.
729 249 13 5/169 DS4LC1ANV72N 2,234. 2,457. 2,567.
Credenza with Steel Sliding Door 309 249 13 5/169 DS4LC1BSV30L 2,104. 2,311. 2,417.
369 249 13 5/169 DS4LC1BSV36L 2,104. 2,311. 2,417.
429 249 13 5/169 DS4LC1BSV42L 2,104. 2,311. 2,417.
489 249 13 5/169 DS4LC1BSV48L 2,155. 2,367. 2,473.
549 249 13 5/169 DS4LC1BSV54L 2,207. 2,423. 2,533.
609 249 13 5/169 DS4LC1BSV60L 2,256. 2,481. 2,588.
669 249 13 5/169 DS4LC1BSV66L 2,308. 2,536. 2,644.
729 249 13 5/169 DS4LC1BSV72L 2,358. 2,588. 2,706.
Credenza with Laminate Sliding Door 309 249 13 5/169 DS4LC1BLV30L 2,555. 2,809. 2,934.
369 249 13 5/169 DS4LC1BLV36L 2,555. 2,809. 2,934.
429 249 13 5/169 DS4LC1BLV42L 2,555. 2,809. 2,934.
489 249 13 5/169 DS4LC1BLV48L 2,605. 2,864. 2,991.
549 249 13 5/169 DS4LC1BLV54L 2,659. 2,918. 3,050.
609 249 13 5/169 DS4LC1BLV60L 2,708. 2,977. 3,111.
669 249 13 5/169 DS4LC1BLV66L 2,760. 3,035. 3,170.
729 249 13 5/169 DS4LC1BLV72L 2,815. 3,093. 3,231.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with Sliding Door:
1. Pattern number2. Paint finish3. Top finish4. Door finish
(laminate and veneer)5. Door edge finish
(laminate only)
Credenza without a Sliding Door:
1. Pattern number2. Paint finish3. Top finish
Order Code
Credenza with Sliding Door:
Example: DS4LC1BSV42L/117/Y319
DS4LC1BSV42L
Pattern Number
117 Dark grey paint
Y319 Cherry Techwood top
Credenza without a Sliding Door:
Example: DS4LC1ANV42N/117/Y319
DS4LC1ANV42N
Pattern Number
117 Dark grey paint
Y319 Cherry Techwood top
Included with:
Credenza with or without SlidingDoor:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with or without a SlidingDoor:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $20 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
205
Sto
rage
Com
pone
nts
CredenzasSingle Depth with Veneer TopWith or without a Sliding Door
description w h d pattern no. P1 P2 P3
Credenza with Veneer Sliding Door 309 249 13 5/169 DS4LC1BVV30L $2,687. $2,949. $3,087.
369 249 13 5/169 DS4LC1BVV36L 2,687. 2,949. 3,087.
429 249 13 5/169 DS4LC1BVV42L 2,687. 2,949. 3,087.
489 249 13 5/169 DS4LC1BVV48L 2,750. 3,021. 3,159.
549 249 13 5/169 DS4LC1BVV54L 2,814. 3,090. 3,230.
609 249 13 5/169 DS4LC1BVV60L 2,873. 3,159. 3,298.
669 249 13 5/169 DS4LC1BVV66L 2,936. 3,226. 3,372.
729 249 13 5/169 DS4LC1BVV72L 3,000. 3,292. 3,441.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with Sliding Door:
1. Pattern number2. Paint finish3. Top finish4. Door finish
(laminate and veneer)5. Door edge finish
(laminate only)
Credenza without a Sliding Door:
1. Pattern number2. Paint finish3. Top finish
Order Code
Credenza with Sliding Door:
Example: DS4LC1BSV42L/117/Y319
DS4LC1BSV42L
Pattern Number
117 Dark grey paint
Y319 Cherry Techwood top
Credenza without a Sliding Door:
Example: DS4LC1ANV42N/117/Y319
DS4LC1ANV42N
Pattern Number
117 Dark grey paint
Y319 Cherry Techwood top
Included with:
Credenza with or without SlidingDoor:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with or without a SlidingDoor:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $20 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
206
CredenzasSingle Depth with Veneer TopWithout a Sliding Door and with a Drawer
description w h d pattern no. P1 P2 P3
Credenza with Steel Door 309 249 13 5/169 DS4LC1CSV30L $2,477. $2,674. $2,772.
369 249 13 5/169 DS4LC1CSV36L 2,477. 2,674. 2,772.
429 249 13 5/169 DS4LC1CSV42L 2,477. 2,674. 2,772.
489 249 13 5/169 DS4LC1CSV48L 2,525. 2,726. 2,828.
549 249 13 5/169 DS4LC1CSV54L 2,571. 2,780. 2,886.
609 249 13 5/169 DS4LC1CSV60L 2,620. 2,830. 2,939.
669 249 13 5/169 DS4LC1CSV66L 2,668. 2,886. 2,998.
729 249 13 5/169 DS4LC1CSV72L 2,715. 2,937. 3,048.
Credenza with Laminate Door 309 249 13 5/169 DS4LC1CLV30L 2,748. 2,945. 3,043.
369 249 13 5/169 DS4LC1CLV36L 2,748. 2,945. 3,043.
429 249 13 5/169 DS4LC1CLV42L 2,748. 2,945. 3,043.
489 249 13 5/169 DS4LC1CLV48L 2,793. 2,999. 3,100.
549 249 13 5/169 DS4LC1CLV54L 2,840. 3,048. 3,158.
609 249 13 5/169 DS4LC1CLV60L 2,891. 3,102. 3,210.
669 249 13 5/169 DS4LC1CLV66L 2,937. 3,158. 3,268.
729 249 13 5/169 DS4LC1CLV72L 2,983. 3,209. 3,319.
Credenza with Veneer Door 309 249 13 5/169 DS4LC1CVV30L 2,806. 3,002. 3,102.
369 249 13 5/169 DS4LC1CVV36L 2,806. 3,002. 3,102.
429 249 13 5/169 DS4LC1CVV42L 2,806. 3,002. 3,102.
489 249 13 5/169 DS4LC1CVV48L 2,850. 3,057. 3,159.
549 249 13 5/169 DS4LC1CVV54L 2,899. 3,108. 3,213.
609 249 13 5/169 DS4LC1CVV60L 2,947. 3,161. 3,268.
669 249 13 5/169 DS4LC1CVV66L 2,994. 3,213. 3,324.
729 249 13 5/169 DS4LC1CVV72L 3,042. 3,267. 3,378.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with a Drawer:
1. Pattern number2. Paint finish3. Top finish4. Door finish
(laminate and veneer only)5. Door edge finish
(laminate only)
Order Code
Credenza with a Drawer:
Example: DS4LC1CSV42L /117/Y319
DS4LC1CSV42L
Pattern Number
117 Dark grey paint
Y319 Cherry Techwood top
Included with:
Credenza with a Drawer:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with a Drawer:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $20 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
207
Sto
rage
Com
pone
nts
CredenzasSingle Depth with Veneer TopWith a Sliding Door and with a Drawer
description w h d pattern no. P1 P2 P3
Credenza with Steel Sliding Doorand Drawer
309 249 13 5/169 DS4LC1DSV30L $2,584. $2,793. $2,894.
369 249 13 5/169 DS4LC1DSV36L 2,584. 2,793. 2,894.
429 249 13 5/169 DS4LC1DSV42L 2,584. 2,793. 2,894.
489 249 13 5/169 DS4LC1DSV48L 2,637. 2,847. 2,952.
549 249 13 5/169 DS4LC1DSV54L 2,687. 2,905. 3,013.
609 249 13 5/169 DS4LC1DSV60L 2,740. 2,961. 3,073.
669 249 13 5/169 DS4LC1DSV66L 2,790. 3,015. 3,130.
729 249 13 5/169 DS4LC1DSV72L 2,840. 3,073. 3,188.
Credenza with Laminate Sliding Doorand Drawer
309 249 13 5/169 DS4LC1DLV30L 3,036. 3,288. 3,417.
369 249 13 5/169 DS4LC1DLV36L 3,036. 3,288. 3,417.
429 249 13 5/169 DS4LC1DLV42L 3,036. 3,288. 3,417.
489 249 13 5/169 DS4LC1DLV48L 3,089. 3,343. 3,476.
549 249 13 5/169 DS4LC1DLV54L 3,143. 3,403. 3,532.
609 249 13 5/169 DS4LC1DLV60L 3,190. 3,461. 3,593.
669 249 13 5/169 DS4LC1DLV66L 3,240. 3,519. 3,652.
729 249 13 5/169 DS4LC1DLV72L 3,293. 3,575. 3,713.
Credenza with Veneer Sliding Doorand Drawer
309 249 13 5/169 DS4LC1DVV30L 3,169. 3,432. 3,572.
369 249 13 5/169 DS4LC1DVV36L 3,169. 3,432. 3,572.
429 249 13 5/169 DS4LC1DVV42L 3,169. 3,432. 3,572.
489 249 13 5/169 DS4LC1DVV48L 3,231. 3,504. 3,638.
549 249 13 5/169 DS4LC1DVV54L 3,292. 3,574. 3,711.
609 249 13 5/169 DS4LC1DVV60L 3,355. 3,638. 3,783.
669 249 13 5/169 DS4LC1DVV66L 3,419. 3,708. 3,854.
729 249 13 5/169 DS4LC1DVV72L 3,483. 3,777. 3,922.
Dimensions listed under w h d are actual to the nearest 1/169
Ordering Information
Credenza with a Sliding Doorand a Drawer:
1. Pattern number2. Paint finish3. Top finish4. Drawer/Door finish
(laminate and veneer only)5. Drawer/Door edge finish
(laminate only)
Order Code
Credenza with a Sliding Doorand a Drawer:Example: DS4LC1SV42L
/117/Y319
DS4LC1SV42L
Pattern Number
117 Dark grey paint
Y319 Cherry Techwood top
Included with:
Credenza with a Sliding Door anda Drawer:
Note: Credenzas are only availablein Knoll core finishes.
Options
Credenza with a Sliding Door anda Drawer:
Lock/No lock optionFor non-locking credenzas with asliding door or a drawer, substitutethe ‘‘L’’ suffix with an ‘‘N’’ anddeduct $40 from the list price.
Note: Credenzas with a drawer havea full back. Credenzas without adrawer have a partial back thatencloses the binder storage areabelow the shelf.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
208
Flip-up Door Overdesk and TackboardsDividends and Series 2
description w d h pattern no. black P1 P2 P3 V1-P1 V1-P2 V1-P3
Flip-Up Door Overdesk with EnclosedBack and Lock (includes Stanchions)
369 13 1/29 159 DD2OD 36L n/a $1,264. $1,394. $1,460. n/a n/a n/a
429 13 1/29 159 DD2OD 42L n/a 1,329. 1,464. 1,538. n/a n/a n/a
489 13 1/29 159 DD2OD 48L n/a 1,370. 1,509. 1,583. n/a n/a n/a
549 13 1/29 159 DD2OD 54L n/a 1,548. 1,835. 1,932. n/a n/a n/a
609 13 1/29 159 DD2OD 60L n/a 1,670. 1,835. 1,932. n/a n/a n/a
669 13 1/29 159 DD2OD 66L n/a 1,713. 1,887. 1,986. n/a n/a n/a
729 13 1/29 159 DD2OD 72L n/a 1,713. 1,887. 1,986. n/a n/a n/a
Series 2 Flip-Up Door Overdesk with EnclosedBack and Lock (includes Stanchions)
369 13 1/29 159 DS2OD 36L n/a 1,757. 2,023. 2,110. 2,145. 2,413. 2,499.
429 13 1/29 159 DS2OD 42L n/a 1,794. 2,064. 2,149. 2,203. 2,468. 2,561.
489 13 1/29 159 DS2OD 48L n/a 1,817. 2,087. 2,177. 2,284. 2,559. 2,641.
549 13 1/29 159 DS2OD 54L n/a 2,210. 2,543. 2,659. 2,934. 3,268. 3,374.
609 13 1/29 159 DS2OD 60L n/a 2,210. 2,543. 2,659. 2,934. 3,268. 3,374.
669 13 1/29 159 DS2OD 66L n/a 2,284. 2,629. 2,741. 3,035. 3,376. 3,491.
729 13 1/29 159 DS2OD 72L n/a 2,284. 2,629. 2,741. 3,035. 3,376. 3,491.
Vertical Dividers (for flip-up overheads and openshelves)Package of 4
DS1 VD 155. 161. 167. 174.
Ordering Information
Pedestals
1. Pattern Number2. Paint Finish3. Door End Cap Finish
Order Code
Overdesk Cabinet
Example: DD2OD 48L, 613, 113
DD2OD48L
Pattern Number
613 Silver paint finish
113 Dark grey door end capfinish
Included with:
Overdesk Cabinet
Stanchion mount overdesk cabinetsincluded an enclosed back.
Options
Overdesk CabinetTo specify overhead cabinet withoutlocks, replace the ‘‘L’’: suffix fromthe pattern number with ‘‘N’’. For309 to 489 wide overdesk units,Deduct $20. For 549, 609 669 and729 wide overdesk units, Deduct$40.
To specify Touchdown overheadcabinet, add ‘‘E’’ as the 2nd to lastdigit of the pattern number.Example: DS3PML48EL(Add $163 for cabinet widths of48( or less. Add $327 for cabinetwidths for 54( or greater).
Add ‘‘Y’’ to the end of the patternnumber to specify a different finishfor the door versus the case. Use P3pricing for this dual finish option.
Dividends Horizon
209
Sto
rage
Com
pone
nts
Flip-up Door Overdesk and TackboardsDividends and Series 2 Tackboard
description w h pattern no.grade
10 20 30 40
Flip-Up Door OverdeskTackable Privacy Screen(for Dividends and Series 2 Overdesks)
369 209 DD3 PS36 $404. $438. $452. $471.
429 209 DD3 PS42 422. 455. 481. 494.
489 209 DD3 PS48 440. 471. 494. 512.
549 209 DD3 PS54 470. 508. 530. 551.
609 209 DD3 PS60 470. 508. 530. 551.
669 209 DD3 PS66 508. 549. 570. 595.
729 209 DD3 PS72 508. 549. 570. 595.
Ordering Information
Vertical Dividers
1. Pattern Number2. Fabric
Order Code
Overdesk Tackable PrivacyScreen
Example: DD3 PS48, W1077
DD3 PS48 Pattern Number
W1077 Element
Included with:
Overdesk Tackable PrivacyScreen
Options
Note:Flip-up Door overdesktackable privacy screen is for usewith Dividends and Series 2 Flip-updoor overheads.
Dividends Horizon
210
Sliding Door Overdesks579 High Cabinet with 149 High Storage, 149 High Door
description width pattern no. P1 P2 P3
579h Overdesk without Doorwith 149 Tall Cabinet
309 DS3ODNS1573014 $1,503. $1,652. $1,722.
369 DS3ODNS1573614 1,532. 1,685. 1,760.
429 DS3ODNS1574214 1,560. 1,713. 1,792.
489 DS3ODNS1574814 1,619. 1,774. 1,856.
609 DS3ODNS1576014 1,753. 1,928. 2,013.
669 DS3ODNS1576614 1,792. 1,976. 2,066.
729 DS3ODNS1577214 1,823. 2,004. 2,093.
579h Overdesk with Steel Sliding Doorand 149 Tall Cabinet
309 DS3ODSS1573014L 1,624. 1,782. 1,860.
369 DS3ODSS1573614L 1,660. 1,823. 1,902.
429 DS3ODSS1574214L 1,697. 1,861. 1,944.
489 DS3ODSS1574814L 1,752. 1,921. 2,006.
609 DS3ODSS1576014L 1,913. 2,108. 2,197.
669 DS3ODSS1576614L 1,960. 2,155. 2,251.
729 DS3ODSS1577214L 1,991. 2,185. 2,279.
579h Overdesk with Laminate Sliding Doorand 149 Tall Cabinet
309 DS3ODSL1573014L 2,141. 2,355. 2,460.
369 DS3ODSL1573614L 2,198. 2,419. 2,522.
429 DS3ODSL1574214L 2,254. 2,477. 2,588.
489 DS3ODSL1574814L 2,316. 2,541. 2,655.
609 DS3ODSL1576014L 2,372. 2,604. 2,719.
669 DS3ODSL1576614L 2,427. 2,668. 2,787.
729 DS3ODSL1577214L 2,482. 2,728. 2,851.
579h Overdesk with Veneer Sliding Doorand 149 Tall Cabinet
309 DS3ODSV1573014L 2,257. 2,481. 2,594.
369 DS3ODSV1573614L 2,325. 2,553. 2,671.
429 DS3ODSV1574214L 2,391. 2,625. 2,746.
489 DS3ODSV1574814L 2,456. 2,698. 2,822.
609 DS3ODSV1576014L 2,522. 2,772. 2,896.
669 DS3ODSV1576614L 2,594. 2,847. 2,974.
729 DS3ODSV1577214L 2,658. 2,917. 3,051.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS1573014FL,613
DS3ODSS1573014FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
211
Sto
rage
Com
pone
nts
Sliding Door Overdesks579 High Cabinet with 219 High Storage, (Full Height Door)
description width pattern no. P1 P2 P3
579h without Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODNS( )573021 $1,620. $1,781. $1,860.
369 DS3ODNS( )573621 1,656. 1,823. 1,904.
429 DS3ODNS( )574221 1,696. 1,862. 1,945.
489 DS3ODNS( )574821 1,760. 1,938. 2,025.
609 DS3ODNS( )576021 1,925. 2,120. 2,217.
669 DS3ODNS( )576621 1,977. 2,177. 2,273.
729 DS3ODNS( )577221 2,009. 2,206. 2,314.
579h Steel Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSS2573021FL 1,847. 2,028. 2,120.
369 DS3ODSS2573621FL 1,881. 2,069. 2,157.
429 DS3ODSS2574221FL 1,938. 2,125. 2,221.
489 DS3ODSS2574821FL 2,046. 2,242. 2,345.
609 DS3ODSS2576021FL 2,243. 2,465. 2,574.
669 DS3ODSS2576621FL 2,318. 2,544. 2,663.
729 DS3ODSS2577221FL 2,365. 2,598. 2,715.
579h Laminate Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSL2573021FL 2,423. 2,663. 2,781.
369 DS3ODSL2573621FL 2,505. 2,750. 2,875.
429 DS3ODSL2574221FL 2,584. 2,844. 2,970.
489 DS3ODSL2574821FL 2,671. 2,930. 3,059.
609 DS3ODSL2576021FL 2,749. 3,024. 3,160.
669 DS3ODSL2576621FL 2,831. 3,115. 3,249.
729 DS3ODSL2577221FL 2,913. 3,202. 3,347.
579h Veneer Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSV2573021FL 2,547. 2,795. 2,921.
369 DS3ODSV2573621FL 2,641. 2,908. 3,039.
429 DS3ODSV2574221FL 2,747. 3,020. 3,154.
489 DS3ODSV2574821FL 2,846. 3,124. 3,267.
609 DS3ODSV2576021FL 2,947. 3,235. 3,384.
669 DS3ODSV2576621FL 3,044. 3,347. 3,496.
729 DS3ODSV2577221FL 3,145. 3,457. 3,612.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS2573021FL,613
DS3ODSS2573021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
212
Sliding Door Overdesks579 High Cabinet with 219 High Storage, (Partial Height Door)
description width pattern no. P1 P2 P3
579h Steel Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSS( )573021PL $1,847. $2,028. $2,120.
369 DS3ODSS( )573621PL 1,881. 2,069. 2,157.
429 DS3ODSS( )574221PL 1,938. 2,125. 2,221.
489 DS3ODSS( )574821PL 2,046. 2,242. 2,345.
609 DS3ODSS( )576021PL 2,243. 2,465. 2,574.
669 DS3ODSS( )576621PL 2,318. 2,544. 2,663.
729 DS3ODSS( )577221PL 2,365. 2,598. 2,715.
579h Laminate Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSL( )573021PL 2,408. 2,641. 2,761.
369 DS3ODSL( )573621PL 2,489. 2,737. 2,855.
429 DS3ODSL( )574221PL 2,571. 2,824. 2,949.
489 DS3ODSL( )574821PL 2,649. 2,912. 3,043.
609 DS3ODSL( )576021PL 2,736. 2,998. 3,136.
669 DS3ODSL( )576621PL 2,815. 3,095. 3,232.
729 DS3ODSL( )577221PL 2,894. 3,180. 3,325.
579h Veneer Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSV( )573021PL 2,523. 2,776. 2,899.
369 DS3ODSV( )573621PL 2,618. 2,875. 2,999.
429 DS3ODSV( )574221PL 2,705. 2,977. 3,111.
489 DS3ODSV( )574821PL 2,800. 3,076. 3,215.
609 DS3ODSV( )576021PL 2,891. 3,175. 3,320.
669 DS3ODSV( )576621PL 2,984. 3,277. 3,423.
729 DS3ODSV( )577221PL 3,072. 3,380. 3,531.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS2573021FL,613
DS3ODSS2573021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
213
Sto
rage
Com
pone
nts
Sliding Door Overdesks649 High Cabinet with 149 High Storage
description width pattern no. P1 P2 P3
649h without Sliding DoorOverdesk with 149 Tall Cabinet
309 DS3ODNS1643014 $1,555. $1,708. $1,784.
369 DS3ODNS1643614 1,568. 1,718. 1,799.
429 DS3ODNS1644214 1,620. 1,774. 1,850.
489 DS3ODNS1644814 1,759. 1,929. 2,013.
609 DS3ODNS1646014 1,814. 1,990. 2,074.
669 DS3ODNS1646614 1,850. 2,034. 2,124.
729 DS3ODNS1647214 1,877. 2,063. 2,149.
649h Steel Sliding DoorOverdesk with 149 Tall Cabinet
309 DS3ODSS1643014L 1,638. 1,796. 1,877.
369 DS3ODSS1643614L 1,674. 1,837. 1,915.
429 DS3ODSS1644214L 1,711. 1,877. 1,958.
489 DS3ODSS1644814L 1,767. 1,939. 2,025.
609 DS3ODSS1646014L 1,932. 2,122. 2,217.
669 DS3ODSS1646614L 1,986. 2,177. 2,273.
729 DS3ODSS1647214L 2,004. 2,198. 2,298.
649h Laminate Sliding DoorOverdesk with 149 Tall Cabinet
309 DS3ODSL1643014L 2,157. 2,373. 2,477.
369 DS3ODSL1643614L 2,218. 2,435. 2,544.
429 DS3ODSL1644214L 2,276. 2,499. 2,613.
489 DS3ODSL1644814L 2,333. 2,563. 2,679.
609 DS3ODSL1646014L 2,391. 2,625. 2,746.
669 DS3ODSL1646614L 2,448. 2,687. 2,812.
729 DS3ODSL1647214L 2,506. 2,751. 2,877.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643014FL,613
DS3ODSS2643014FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
214
Sliding Door Overdesks649 High Cabinet with 149 High Storage
description width pattern no. P1 P2 P3
649h Veneer Sliding DoorOverdesk with 149 Tall Cabinet
309 DS3ODSV1643014L $2,276. $2,501. $2,615.
369 DS3ODSV1643614L 2,345. 2,574. 2,687.
429 DS3ODSV1644214L 2,413. 2,649. 2,765.
489 DS3ODSV1644814L 2,481. 2,723. 2,847.
609 DS3ODSV1646014L 2,551. 2,797. 2,925.
669 DS3ODSV1646614L 2,618. 2,874. 2,999.
729 DS3ODSV1647214L 2,684. 2,947. 3,083.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643014FL,613
DS3ODSS2643014FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
215
Sto
rage
Com
pone
nts
Sliding Door Overdesks649 High Cabinet with 219 High Storage (Full Height Door)
description width pattern no. P1 P2 P3
649h without Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODNS( )643021 $1,652. $1,821. $1,899.
369 DS3ODNS( )643621 1,681. 1,847. 1,932.
429 DS3ODNS( )644221 1,718. 1,896. 1,988.
489 DS3ODNS( )644821 1,833. 2,013. 2,109.
609 DS3ODNS( )646021 2,010. 2,212. 2,316.
669 DS3ODNS( )646621 2,074. 2,281. 2,388.
729 DS3ODNS( )647221 2,123. 2,335. 2,441.
649h Steel Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSS2643021FL 1,860. 2,044. 2,131.
369 DS3ODSS2643621FL 1,896. 2,080. 2,177.
429 DS3ODSS2644221FL 1,946. 2,137. 2,235.
489 DS3ODSS2644821FL 2,056. 2,254. 2,360.
609 DS3ODSS2646021FL 2,254. 2,477. 2,588.
669 DS3ODSS2646621FL 2,328. 2,559. 2,674.
729 DS3ODSS2647221FL 2,379. 2,613. 2,728.
649h Laminate Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSL2643021FL 2,444. 2,685. 2,807.
369 DS3ODSL2643621FL 2,523. 2,776. 2,899.
429 DS3ODSL2644221FL 2,609. 2,866. 2,993.
489 DS3ODSL2644821FL 2,687. 2,957. 3,089.
609 DS3ODSL2646021FL 2,771. 3,045. 3,186.
669 DS3ODSL2646621FL 2,853. 3,136. 3,277.
729 DS3ODSL2647221FL 2,937. 3,229. 3,375.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643021FL,613
DS3ODSS2643021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
216
Sliding Door Overdesks649 High Cabinet with 219 High Storage (Full Height Door)
description width pattern no. P1 P2 P3
649h Veneer Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSV2643021FL $2,569. $2,822. $2,948.
369 DS3ODSV2643621FL 2,671. 2,930. 3,059.
429 DS3ODSV2644221FL 2,765. 3,042. 3,177.
489 DS3ODSV2644821FL 2,867. 3,154. 3,289.
609 DS3ODSV2646021FL 2,970. 3,259. 3,410.
669 DS3ODSV2646621FL 3,066. 3,372. 3,522.
729 DS3ODSV2647221FL 3,169. 3,480. 3,634.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643021FL,613
DS3ODSS2643021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
217
Sto
rage
Com
pone
nts
Sliding Door Overdesks649 High Cabinet with 219 High Storage, (Partial Height Door)
description width pattern no. P1 P2 P3
649h Steel Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSS( )643021PL $1,860. $2,044. $2,131.
369 DS3ODSS( )643621PL 1,896. 2,080. 2,177.
429 DS3ODSS( )644221PL 1,946. 2,137. 2,235.
489 DS3ODSS( )644821PL 2,056. 2,254. 2,360.
609 DS3ODSS( )646021PL 2,254. 2,477. 2,588.
669 DS3ODSS( )646621PL 2,328. 2,559. 2,674.
729 DS3ODSS( )647221PL 2,379. 2,613. 2,728.
649h Laminate Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSL( )643021PL 2,430. 2,672. 2,791.
369 DS3ODSL( )643621PL 2,509. 2,759. 2,881.
429 DS3ODSL( )644221PL 2,595. 2,850. 2,977.
489 DS3ODSL( )644821PL 2,674. 2,937. 3,067.
609 DS3ODSL( )646021PL 2,752. 3,029. 3,165.
669 DS3ODSL( )646621PL 2,835. 3,117. 3,253.
729 DS3ODSL( )647221PL 2,915. 3,205. 3,351.
649h Veneer Sliding DoorOverdesk with 219 Tall Cabinet
309 DS3ODSV( )643021PL 2,551. 2,800. 2,925.
369 DS3ODSV( )643621PL 2,637. 2,904. 3,032.
429 DS3ODSV( )644221PL 2,734. 2,996. 3,134.
489 DS3ODSV( )644821PL 2,824. 3,103. 3,237.
609 DS3ODSV( )646021PL 2,913. 3,202. 3,343.
669 DS3ODSV( )646621PL 3,001. 3,299. 3,452.
729 DS3ODSV( )647221PL 3,098. 3,402. 3,556.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643021FL,613
DS3ODSS2643021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
218
Sliding Door Overdesks with Tackboard579 High Cabinet with 149 High Storage, 149 High Door
description width pattern no. P1 P2 P3
579h Overdesk without Door with149 Tall Cabinet with tackboard
309 DS3ODNS1573014T $1,983. $2,133. $2,201.
369 DS3ODNS1573614T 2,022. 2,177. 2,248.
429 DS3ODNS1574214T 2,077. 2,234. 2,314.
489 DS3ODNS1574814T 2,151. 2,308. 2,389.
609 DS3ODNS1576014T 2,325. 2,501. 2,586.
669 DS3ODNS1576614T 2,365. 2,551. 2,637.
729 DS3ODNS1577214T 2,440. 2,622. 2,714.
579h Overdesk with Steel Sliding Doorand 149 Tall Cabinet with tackboard
309 DS3ODSS1573014LT 2,104. 2,261. 2,336.
369 DS3ODSS1573614LT 2,151. 2,314. 2,391.
429 DS3ODSS1574214LT 2,218. 2,380. 2,462.
489 DS3ODSS1574814LT 2,287. 2,454. 2,544.
609 DS3ODSS1576014LT 2,487. 2,679. 2,770.
669 DS3ODSS1576614LT 2,540. 2,730. 2,826.
729 DS3ODSS1577214LT 2,609. 2,802. 2,897.
579h Overdesk with Laminate Sliding Doorand 149 Tall Cabinet with tackboard
309 DS3ODSL1573014LT 2,622. 2,833. 2,939.
369 DS3ODSL1573614LT 2,687. 2,908. 3,015.
429 DS3ODSL1574214LT 2,772. 2,996. 3,110.
489 DS3ODSL1574814LT 2,850. 3,072. 3,187.
609 DS3ODSL1576014LT 2,943. 3,177. 3,290.
669 DS3ODSL1576614LT 2,996. 3,237. 3,359.
729 DS3ODSL1577214LT 3,102. 3,347. 3,472.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS1573014FL,613
DS3ODSS1573014FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
219
Sto
rage
Com
pone
nts
Sliding Door Overdesks with Tackboard579 High Cabinet with 149 High Storage, 149 High Door
description width pattern no. P1 P2 P3
579h Overdesk with Veneer Sliding Doorand 149 Tall Cabinet with tackboard
309 DS3ODSV1573014LT $2,736. $2,959. $3,068.
369 DS3ODSV1573614LT 2,818. 3,043. 3,161.
429 DS3ODSV1574214LT 2,913. 3,145. 3,267.
489 DS3ODSV1574814LT 2,993. 3,234. 3,355.
609 DS3ODSV1576014LT 3,101. 3,350. 3,472.
669 DS3ODSV1576614LT 3,165. 3,418. 3,546.
729 DS3ODSV1577214LT 3,274. 3,537. 3,667.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS1573014FL,613
DS3ODSS1573014FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
220
Sliding Door Overdesks with Tackboard579 High Cabinet with 219 High Storage, (Full Height Door)
description width pattern no. P1 P2 P3
579h without Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODNS( )573021T $1,950. $2,114. $2,193.
369 DS3ODNS( )573621T 2,002. 2,168. 2,246.
429 DS3ODNS( )574221T 2,070. 2,235. 2,319.
489 DS3ODNS( )574821T 2,149. 2,325. 2,419.
609 DS3ODNS( )576021T 2,355. 2,550. 2,641.
669 DS3ODNS( )576621T 2,405. 2,604. 2,699.
729 DS3ODNS( )577221T 2,482. 2,681. 2,787.
579h Steel Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSS2573021FLT 2,181. 2,364. 2,452.
369 DS3ODSS2573621FLT 2,231. 2,418. 2,506.
429 DS3ODSS2574221FLT 2,312. 2,501. 2,598.
489 DS3ODSS2574821FLT 2,433. 2,631. 2,734.
609 DS3ODSS2576021FLT 2,673. 2,893. 3,001.
669 DS3ODSS2576621FLT 2,746. 2,971. 3,089.
729 DS3ODSS2577221FLT 2,841. 3,067. 3,186.
579h Laminate Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSL2573021FLT 2,752. 2,994. 3,115.
369 DS3ODSL2573621FLT 2,850. 3,101. 3,221.
429 DS3ODSL2574221FLT 2,959. 3,216. 3,343.
489 DS3ODSL2574821FLT 3,057. 3,320. 3,452.
609 DS3ODSL2576021FLT 3,178. 3,452. 3,585.
669 DS3ODSL2576621FLT 3,259. 3,542. 3,677.
729 DS3ODSL2577221FLT 3,386. 3,675. 3,819.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2573021FL,613
DS3ODSS2573021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
221
Sto
rage
Com
pone
nts
Sliding Door Overdesks with Tackboard579 High Cabinet with 219 High Storage, (Full Height Door)
description width pattern no. P1 P2 P3
579h Veneer Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSV2573021FLT $2,879. $3,128. $3,253.
369 DS3ODSV2573621FLT 2,991. 3,251. 3,385.
429 DS3ODSV2574221FLT 3,121. 3,396. 3,528.
489 DS3ODSV2574821FLT 3,234. 3,515. 3,656.
609 DS3ODSV2576021FLT 3,375. 3,663. 3,812.
669 DS3ODSV2576621FLT 3,474. 3,774. 3,924.
729 DS3ODSV2577221FLT 3,618. 3,930. 4,081.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2573021FL,613
DS3ODSS2573021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
222
Sliding Door Overdesks with Tackboard579 High Cabinet with 219 High Storage, (Partial Height Door)
description width pattern no. P1 P2 P3
579h Steel Sliding Door Overdesk with219 Tall Cabinet with tackboard
369 DS3ODSS( )573021PLT $2,181. $2,364. $2,452.
369 DS3ODSS( )573621PLT 2,231. 2,418. 2,506.
429 DS3ODSS( )574221PLT 2,312. 2,501. 2,598.
489 DS3ODSS( )574821PLT 2,433. 2,631. 2,734.
609 DS3ODSS( )576021PLT 2,673. 2,893. 3,001.
669 DS3ODSS( )576621PLT 2,746. 2,971. 3,089.
729 DS3ODSS( )577221PLT 2,841. 3,067. 3,186.
579h Laminate Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSL( )573021PLT 2,743. 2,978. 3,100.
369 DS3ODSL( )573621PLT 2,835. 3,084. 3,202.
429 DS3ODSL( )574221PLT 2,945. 3,198. 3,325.
489 DS3ODSL( )574821PLT 3,039. 3,298. 3,432.
609 DS3ODSL( )576021PLT 3,165. 3,428. 3,563.
669 DS3ODSL( )576621PLT 3,242. 3,519. 3,659.
729 DS3ODSL( )577221PLT 3,366. 3,655. 3,796.
579h Veneer Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSV( )573021PLT 2,863. 3,111. 3,234.
369 DS3ODSV( )573621PLT 2,962. 3,221. 3,350.
429 DS3ODSV( )574221PLT 3,083. 3,352. 3,484.
489 DS3ODSV( )574821PLT 3,188. 3,466. 3,604.
609 DS3ODSV( )576021PLT 3,319. 3,604. 3,748.
669 DS3ODSV( )576621PLT 3,412. 3,704. 3,852.
729 DS3ODSV( )577221PLT 3,545. 3,852. 4,006.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2573021FL,613
DS3ODSS2573021FL
Pattern number
613 Silver Paint Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
223
Sto
rage
Com
pone
nts
Sliding Door Overdesks with Tackboard649 High Cabinet with 149 High Storage
description width pattern no. P1 P2 P3
649h without Sliding Door Overdesk with149 Tall Cabinet with tackboard
309 DS3ODNS1643014T $2,081. $2,235. $2,312.
369 DS3ODNS1643614T 2,109. 2,261. 2,336.
429 DS3ODNS1644214T 2,188. 2,347. 2,426.
489 DS3ODNS1644814T 2,349. 2,515. 2,603.
609 DS3ODNS1646014T 2,441. 2,619. 2,704.
669 DS3ODNS1646614T 2,482. 2,666. 2,751.
729 DS3ODNS1647214T 2,556. 2,741. 2,829.
649h Steel Sliding Door Overdesk with149 Tall Cabinet with tackboard
309 DS3ODSS1643014LT 2,168. 2,323. 2,405.
369 DS3ODSS1643614LT 2,215. 2,379. 2,455.
429 DS3ODSS1644214LT 2,284. 2,446. 2,532.
489 DS3ODSS1644814LT 2,355. 2,523. 2,616.
609 DS3ODSS1646014LT 2,559. 2,749. 2,847.
669 DS3ODSS1646614LT 2,615. 2,805. 2,906.
729 DS3ODSS1647214LT 2,683. 2,879. 2,974.
649h Laminate Sliding Door Overdesk with149 Tall Cabinet with tackboard
309 DS3ODSL1643014LT 2,685. 2,899. 3,003.
369 DS3ODSL1643614LT 2,757. 2,974. 3,083.
429 DS3ODSL1644214LT 2,848. 3,068. 3,183.
489 DS3ODSL1644814LT 2,921. 3,154. 3,268.
609 DS3ODSL1646014LT 3,024. 3,253. 3,376.
669 DS3ODSL1646614LT 3,080. 3,320. 3,442.
729 DS3ODSL1647214LT 3,186. 3,434. 3,556.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643014FLT,613
DS3ODSS2643014FLT
Pattern number
613 Silver Paint Finish
W1360 Annex Tackboard fabric
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
224
Sliding Door Overdesks with Tackboard649 High Cabinet with 149 High Storage
description width pattern no. P1 P2 P3
649h Veneer Sliding Door Overdesk with149 Tall Cabinet with tackboard
309 DS3ODSV1643014LT $2,803. $3,029. $3,142.
369 DS3ODSV1643614LT 2,882. 3,116. 3,232.
429 DS3ODSV1644214LT 2,987. 3,221. 3,342.
489 DS3ODSV1644814LT 3,067. 3,310. 3,434.
609 DS3ODSV1646014LT 3,178. 3,428. 3,554.
669 DS3ODSV1646614LT 3,246. 3,502. 3,633.
729 DS3ODSV1647214LT 3,364. 3,628. 3,763.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643014FLT,613
DS3ODSS2643014FLT
Pattern number
613 Silver Paint Finish
W1360 Annex Tackboard fabric
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
225
Sto
rage
Com
pone
nts
Sliding Door Overdesks with Tackboard649 High Cabinet with 219 High Storage (Full Height Door)
description width pattern no. P1 P2 P3
649h without Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODNS( )643021T $2,133. $2,300. $2,379.
369 DS3ODNS( )643621T 2,173. 2,336. 2,423.
429 DS3ODNS( )644221T 2,241. 2,419. 2,506.
489 DS3ODNS( )644821T 2,367. 2,551. 2,640.
609 DS3ODNS( )646021T 2,583. 2,786. 2,885.
669 DS3ODNS( )646621T 2,649. 2,853. 2,961.
729 DS3ODNS( )647221T 2,741. 2,955. 3,058.
649h Steel Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSS2643021FLT 2,336. 2,519. 2,611.
369 DS3ODSS2643621FLT 2,388. 2,572. 2,670.
429 DS3ODSS2644221FLT 2,467. 2,660. 2,752.
489 DS3ODSS2644821FLT 2,588. 2,791. 2,893.
609 DS3ODSS2646021FLT 2,828. 3,053. 3,164.
669 DS3ODSS2646621FLT 2,906. 3,132. 3,246.
729 DS3ODSS2647221FLT 2,995. 3,232. 3,347.
649h Laminate Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSL2643021FLT 2,925. 3,169. 3,288.
369 DS3ODSL2643621FLT 3,018. 3,268. 3,394.
429 DS3ODSL2644221FLT 3,126. 3,385. 3,512.
489 DS3ODSL2644821FLT 3,225. 3,490. 3,623.
609 DS3ODSL2646021FLT 3,347. 3,620. 3,759.
669 DS3ODSL2646621FLT 3,428. 3,709. 3,849.
729 DS3ODSL2647221FLT 3,554. 3,846. 3,993.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643021FL,613
DS3ODSS2643021FL
Pattern number
613 Silver Paint Finish
W1360 Annex Tackboard Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
226
Sliding Door Overdesks with Tackboard649 High Cabinet with 219 High Storage (Full Height Door)
description width pattern no. P1 P2 P3
649h Veneer Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSV2643021FLT $3,046. $3,298. $3,428.
369 DS3ODSV2643621FLT 3,161. 3,422. 3,553.
429 DS3ODSV2644221FLT 3,289. 3,561. 3,697.
489 DS3ODSV2644821FLT 3,401. 3,689. 3,824.
609 DS3ODSV2646021FLT 3,542. 3,831. 3,981.
669 DS3ODSV2646621FLT 3,641. 3,946. 4,095.
729 DS3ODSV2647221FLT 3,784. 4,099. 4,253.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643021FL,613
DS3ODSS2643021FL
Pattern number
613 Silver Paint Finish
W1360 Annex Tackboard Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
227
Sto
rage
Com
pone
nts
Sliding Door Overdesks with Tackboard649 High Cabinet with 219 High Storage, (Partial Height Door)
description width pattern no. P1 P2 P3
649h Steel Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSS( )643021PLT $2,336. $2,519. $2,611.
369 DS3ODSS( )643621PLT 2,388. 2,572. 2,670.
429 DS3ODSS( )644221PLT 2,467. 2,660. 2,752.
489 DS3ODSS( )644821PLT 2,588. 2,791. 2,893.
609 DS3ODSS( )646021PLT 2,828. 3,053. 3,164.
669 DS3ODSS( )646621PLT 2,906. 3,132. 3,246.
729 DS3ODSS( )647221PLT 2,995. 3,232. 3,347.
649h Laminate Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSL( )643021PLT 2,910. 3,152. 3,269.
369 DS3ODSL( )643621PLT 2,999. 3,249. 3,372.
429 DS3ODSL( )644221PLT 3,113. 3,368. 3,496.
489 DS3ODSL( )644821PLT 3,209. 3,473. 3,604.
609 DS3ODSL( )646021PLT 3,330. 3,603. 3,736.
669 DS3ODSL( )646621PLT 3,410. 3,692. 3,828.
729 DS3ODSL( )647221PLT 3,535. 3,824. 3,968.
649h Veneer Sliding Door Overdesk with219 Tall Cabinet with tackboard
309 DS3ODSV( )643021PLT 3,029. 3,279. 3,407.
369 DS3ODSV( )643621PLT 3,126. 3,395. 3,522.
429 DS3ODSV( )644221PLT 3,251. 3,517. 3,656.
489 DS3ODSV( )644821PLT 3,357. 3,637. 3,774.
609 DS3ODSV( )646021PLT 3,487. 3,776. 3,916.
669 DS3ODSV( )646621PLT 3,575. 3,879. 4,023.
729 DS3ODSV( )647221PLT 3,716. 4,018. 4,177.
Ordering Information
Sliding Door Overdesk
1. Pattern Number2. Case Finish3. Door Finish4. Edge Finish
(laminate door only)5. Tackboard fabric
Order Code
Sliding Door Overdesk
Example: DS3ODSS2643021FL,613
DS3ODSS2643021FL
Pattern number
613 Silver Paint Finish
W1360 Annex Tackboard Finish
Included with:
Sliding Door Overdesk
Note: Overheads are only availablein Knoll core finishes.
Note: Fabric tackboard covers fromtop of worksurface to bottom oflower shelf.
Options
No lock - substitute ‘‘N’’ for ‘‘L’’ atthe end of pattern number, subtract$20.
Back option for No Door units(1)= Back covering overhead only(2)= Back covering overhead andshelf section.
Paint Configuration Option:Add ‘‘Y’’ at the end of the patternnumber to specify a different paintfinish on the case and fronts. P3pricing applies on all product withdual paint finishes.
Dividends Horizon
228
Rectangular Worksurfaces189 Deep
description w * w d t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edge
laminate w/metaledge
techwood w/techwood
edge
189 Deep RectangularNo Grommets
189 17 13/169 17 1/29 1 1/49 D1R 1818N $228. $249. $271. $558.
219 20 13/169 17 1/29 1 1/49 D1R 2118N 232. 255. 281. 597.
249 23 13/169 17 1/29 1 1/49 D1R 2418N 239. 261. 283. 584.
279 26 13/169 17 1/29 1 1/49 D1R 2718N 244. 268. 293. 600.
309 29 13/169 17 1/29 1 1/49 D1R 3018N 251. 276. 299. 613.
339 32 13/169 17 1/29 1 1/49 D1R 3318N 262. 294. 319. 624.
369 35 13/169 17 1/29 1 1/49 D1R 3618N 279. 310. 338. 641.
399 38 13/169 17 1/29 1 1/49 D1R 3918N 294. 331. 365. 659.
429 41 13/169 17 1/29 1 1/49 D1R 4218N 323. 355. 386. 673.
459 44 13/169 17 1/29 1 1/49 D1R 4518N 343. 376. 414. 686.
489 47 13/169 17 1/29 1 1/49 D1R 4818N 360. 398. 435. 702.
519 50 13/169 17 1/29 1 1/49 D1R 5118N 373. 408. 442. 717.
549 53 13/169 17 1/29 1 1/49 D1R 5418N 383. 421. 462. 725.
579 56 13/169 17 1/29 1 1/49 D1R 5718N 400. 439. 474. 736.
609 59 13/169 17 1/29 1 1/49 D1R 6018N 417. 458. 501. 755.
639 62 13/169 17 1/29 1 1/49 D1R 6318N 428. 479. 527. 772.
669 65 13/169 17 1/29 1 1/49 D1R 6618N 449. 494. 540. 784.
699 68 13/169 17 1/29 1 1/49 D1R 6918N 452. 501. 550. 799.
729 71 13/169 17 1/29 1 1/49 D1R 7218N 473. 520. 568. 810.
759 74 13/169 17 1/29 1 1/49 D1R 7518N 485. 539. 589. 831.
789 77 13/169 17 1/29 1 1/49 D1R 7818N 509. 560. 611. 845.
819 80 13/169 17 1/29 1 1/49 D1R 8118N 524. 573. 631. 864.
849 83 13/169 17 1/29 1 1/49 D1R 8418N 535. 590. 640. 878.
879 86 13/169 17 1/29 1 1/49 D1R 8718N 562. 613. 669. 894.
909 89 13/169 17 1/29 1 1/49 D1R 9018N 597. 659. 713. 912.
939 92 13/169 17 1/29 1 1/49 D1R 9318N 628. 686. 745. 930.
969 95 13/169 17 1/29 1 1/49 D1R 9618N 662. 723. 790. 946.
999 98 13/169 17 1/29 1 1/49 D1R 9918N 689. 750. 814. 979.
w* = nominal widthDimensions listed under w d t are actual to the nearest 1/169
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1R 4818N, 114, 114
D1R4818N
Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurfaces
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Center-Located Edge Grommet• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommet, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’.Add $19.
Dividends Horizon
229
Wor
ksur
face
s
Rectangular Worksurfaces249 Deep
description w w d t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edge
laminate w/metaledge
techwood w/techwood
edge
249 Deep RectangularNo Grommets
189 17 13/169 23 1/29 1 1/49 D1R 1824N $239. $261. $283. $584.
219 20 13/169 23 1/29 1 1/49 D1R 2124N 244. 268. 294. 590.
249 23 13/169 23 1/29 1 1/49 D1R 2424N 252. 278. 307. 601.
279 26 13/169 23 1/29 1 1/49 D1R 2724N 270. 300. 323. 619.
309 29 13/169 23 1/29 1 1/49 D1R 3024N 290. 318. 345. 635.
339 32 13/169 23 1/29 1 1/49 D1R 3324N 303. 332. 369. 652.
369 35 13/169 23 1/29 1 1/49 D1R 3624N 321. 352. 383. 670.
399 38 13/169 23 1/29 1 1/49 D1R 3924N 343. 372. 414. 688.
429 41 13/169 23 1/29 1 1/49 D1R 4224N 367. 404. 444. 704.
459 44 13/169 23 1/29 1 1/49 D1R 4524N 387. 428. 464. 721.
489 47 13/169 23 1/29 1 1/49 D1R 4824N 409. 452. 495. 739.
519 50 13/169 23 1/29 1 1/49 D1R 5124N 428. 476. 513. 758.
549 53 13/169 23 1/29 1 1/49 D1R 5424N 446. 490. 534. 780.
579 56 13/169 23 1/29 1 1/49 D1R 5724N 465. 508. 558. 799.
609 59 13/169 23 1/29 1 1/49 D1R 6024N 484. 529. 574. 816.
639 62 13/169 23 1/29 1 1/49 D1R 6324N 504. 548. 600. 837.
669 65 13/169 23 1/29 1 1/49 D1R 6624N 519. 570. 624. 850.
699 68 13/169 23 1/29 1 1/49 D1R 6924N 527. 587. 637. 867.
729 71 13/169 23 1/29 1 1/49 D1R 7224N 542. 598. 653. 889.
759 74 13/169 23 1/29 1 1/49 D1R 7524N 571. 619. 672. 912.
789 77 13/169 23 1/29 1 1/49 D1R 7824N 584. 638. 695. 931.
819 80 13/169 23 1/29 1 1/49 D1R 8124N 597. 658. 719. 948.
849 83 13/169 23 1/29 1 1/49 D1R 8424N 615. 680. 740. 970.
879 86 13/169 23 1/29 1 1/49 D1R 8724N 659. 733. 787. 1,001.
909 89 13/169 23 1/29 1 1/49 D1R 9024N 694. 760. 835. 1,012.
939 92 13/169 23 1/29 1 1/49 D1R 9324N 730. 811. 879. 1,031.
969 95 13/169 23 1/29 1 1/49 D1R 9624N 756. 836. 913. 1,051.
999 98 13/169 23 1/29 1 1/49 D1R 9924N 769. 877. 946. 1,089.
1029 101 13/169 23 1/29 1 1/49 D1R 10224N 793. 866. 957. 1,110.
1089 107 13/169 23 1/29 1 1/49 D1R 10824N 890. 952. 1,048. 1,205.
1209 119 13/169 23 1/29 1 1/49 D1R 12024N 958. 989. 1,089. 1,339.
w* = nominal widthDimensions listed under w d t are actual to the nearest 1/169
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1R 4818N, 114, 114
D1R4818N
Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurfaces
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Center-Located Edge Grommet• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommet, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’.Add $19.
Dividends Horizon
230
Rectangular Worksurfaces199 Deep
description w * w d t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edge
laminate w/metaledge
techwood w/techwood
edge
199 Deep Rectangular - No Grommets(for use with doublewide pedestals)
249 23 13/169 18 3/49 1 1/49 D1R2419N $241. $263. $288. $586.
309 29 13/169 18 3/49 1 1/49 D1R3019N 257. 282. 309. 615.
369 35 13/169 18 3/49 1 1/49 D1R3619N 288. 317. 344. 649.
429 41 13/169 18 3/49 1 1/49 D1R4219N 330. 363. 398. 678.
489 47 13/169 18 3/49 1 1/49 D1R4819N 367. 405. 443. 710.
549 53 13/169 18 3/49 1 1/49 D1R5419N 394. 435. 473. 738.
609 59 13/169 18 3/49 1 1/49 D1R6019N 429. 470. 514. 766.
669 65 13/169 18 3/49 1 1/49 D1R6619N 460. 508. 553. 793.
729 71 13/169 18 3/49 1 1/49 D1R7219N 487. 534. 585. 826.
789 77 13/169 18 3/49 1 1/49 D1R7819N 519. 570. 625. 860.
849 83 13/169 18 3/49 1 1/49 D1R8419N 550. 605. 662. 891.
909 89 13/169 18 3/49 1 1/49 D1R9019N 613. 673. 736. 927.
969 95 13/169 18 3/49 1 1/49 D1R9619N 675. 743. 811. 961.
w* = nominal widthDimensions listed under w d t are actual to the nearest 1/169
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1R 4819N, 114, 114
D1R4819N
Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurfaces
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Center-Located Edge Grommet• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommet, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’.Add $19.
Dividends Horizon
231
Wor
ksur
face
s
Rectangular Worksurfaces309 and 369 Deep
description w w d t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
309 Deep RectangularNo Grommets
249 23 13/169 29 1/29 1 1/49 D1R 2430N $322. $353. $384. $624.
279 26 13/169 29 1/29 1 1/49 D1R 2730N 342. 369. 404. 640.
309 29 13/169 29 1/29 1 1/49 D1R 3030N 360. 398. 435. 672.
339 32 13/169 29 1/29 1 1/49 D1R 3330N 380. 415. 460. 690.
369 35 13/169 29 1/29 1 1/49 D1R 3630N 400. 440. 483. 718.
399 38 13/169 29 1/29 1 1/49 D1R 3930N 417. 454. 493. 741.
429 41 13/169 29 1/29 1 1/49 D1R 4230N 435. 476. 516. 766.
459 44 13/169 29 1/29 1 1/49 D1R 4530N 462. 506. 556. 787.
489 47 13/169 29 1/29 1 1/49 D1R 4830N 484. 529. 574. 813.
519 50 13/169 29 1/29 1 1/49 D1R 5130N 519. 553. 609. 831.
549 53 13/169 29 1/29 1 1/49 D1R 5430N 547. 600. 656. 848.
579 56 13/169 29 1/29 1 1/49 D1R 5730N 562. 635. 690. 864.
609 59 13/169 29 1/29 1 1/49 D1R 6030N 601. 663. 719. 886.
639 62 13/169 29 1/29 1 1/49 D1R 6330N 636. 708. 768. 902.
669 65 13/169 29 1/29 1 1/49 D1R 6630N 669. 736. 803. 920.
699 68 13/169 29 1/29 1 1/49 D1R 6930N 682. 748. 818. 941.
729 71 13/169 29 1/29 1 1/49 D1R 7230N 694. 760. 835. 953.
759 74 13/169 29 1/29 1 1/49 D1R 7530N 711. 785. 864. 972.
789 77 13/169 29 1/29 1 1/49 D1R 7830N 741. 822. 891. 999.
819 80 13/169 29 1/29 1 1/49 D1R 8130N 758. 850. 915. 1,019.
849 83 13/169 29 1/29 1 1/49 D1R 8430N 788. 866. 948. 1,040.
879 86 13/169 29 1/29 1 1/49 D1R 8730N 811. 893. 980. 1,063.
909 89 13/169 29 1/29 1 1/49 D1R 9030N 847. 931. 1,016. 1,085.
939 92 13/169 29 1/29 1 1/49 D1R 9330N 867. 975. 1,058. 1,107.
969 95 13/169 29 1/29 1 1/49 D1R 9630N 910. 1,000. 1,090. 1,128.
999 98 13/169 29 1/29 1 1/49 D1R 9930N 926. 1,031. 1,123. 1,153.
1029 101 13/169 29 1/29 1 1/49 D1R 10230N 793. 912. 974. 1,145.
1089 107 13/169 29 1/29 1 1/49 D1R 10830N 836. 949. 1,020. 1,180.
1149 113 13/169 29 1/29 1 1/49 D1R 11430N 866. 983. 1,063. 1,221.
1209 119 13/169 29 1/29 1 1/49 D1R 12030N 943. 1,043. 1,139. 1,324.
w* = nominal widthDimensions listed under w h t are actual to the nearest 1/169
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1R 6030N, 114, 114
D1R6030N
Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurfaces
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Center-Located Edge Grommet• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommet, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’.Add $19.
Dividends Horizon
232
Rectangular Worksurfaces309 and 369 Deep
description w w d t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
369 Deep RectangularNo Grommets
609 59 13/169 35 1/29 1 1/49 D1R 6036N $769. $846. $922. $1,049.
669 65 13/169 35 1/29 1 1/49 D1R 6636N 849. 938. 1,019. 1,086.
729 71 13/169 35 1/29 1 1/49 D1R 7236N 938. 1,034. 1,123. 1,125.
789 77 13/169 35 1/29 1 1/49 D1R 7836N 999. 1,060. 1,136. 1,140.
849 83 13/169 35 1/29 1 1/49 D1R 8436N 1,057. 1,089. 1,143. 1,151.
909 89 13/169 35 1/29 1 1/49 D1R 9036N 1,140. 1,170. 1,218. 1,236.
969 95 13/169 35 1/29 1 1/49 D1R 9636N 1,219. 1,257. 1,288. 1,324.
w* = nominal widthDimensions listed under w h t are actual to the nearest 1/169
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1R 6030N, 114, 114
D1R6030N
Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurfaces
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Center-Located Edge Grommet• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommet, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’.Add $19.
Dividends Horizon
233
Wor
ksur
face
s
Curvilinear Wave End WorksurfacesMixed Depths
description w * 1 2 3 A B t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
Curvilinear Wave End LeftNo Grommets
369 35 13/169 23 1/29 29 1/29 14 15/169 2 15/169 1 1/49 D1W 363024N $678. $743. $816. $1,300.
429 41 13/169 23 1/29 29 1/29 14 15/169 8 15/169 1 1/49 D1W 423024N 711. 785. 850. 1,339.
489 47 13/169 23 1/29 29 1/29 14 15/169 14 15/169 1 1/49 D1W 483024N 757. 837. 914. 1,375.
729 71 13/169 17 1/29 29 1/29 23 7/169 14 15/169 1 1/49 D1W 723018N 943. 1,035. 1,128. 1,412.
729 71 13/169 23 1/29 29 1/29 23 7/169 30 7/169 1 1/49 D1W 723024N 968. 1,063. 1,165. 1,455.
729 71 13/169 23 1/29 35 1/29 23 7/169 14 15/169 1 1/49 D1W 723624N 1,001. 1,098. 1,201. 1,489.
Curvilinear Wave End RightNo Grommets
369 35 13/169 29 1/29 23 1/29 2 15/169 14 15/169 1 1/49 D1W 362430N 678. 743. 816. 1,300.
429 41 13/169 29 1/29 23 1/29 8 15/169 14 15/169 1 1/49 D1W 422430N 711. 785. 850. 1,339.
489 47 13/169 29 1/29 23 1/29 14 15/169 14 15/169 1 1/49 D1W 482430N 757. 837. 914. 1,375.
729 71 13/169 29 1/29 17 1/29 14 15/169 23 7/169 1 1/49 D1W 721830N 943. 1,035. 1,128. 1,412.
729 71 13/169 29 1/29 23 1/29 30 7/169 23 7/169 1 1/49 D1W 722430N 968. 1,063. 1,165. 1,455.
729 71 13/169 35 1/29 23 1/29 14 15/169 23 7/169 1 1/49 D1W 722436N 1,001. 1,098. 1,201. 1,489.
w* = nominal widthA and B = straight edge lengthDimensions listed under 1, 2 and 3 are actual to nearest 1/169
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1R 6030N, 114, 114
D1R6030N
Pattern Number
114 FolkstoneGrey Laminate
114 Folkstone Grey EdgeBand
Included with:
Worksurfaces
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Center-Located Edge Grommet• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommet, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’.Add $19.
Dividends Horizon
234
Smooth Wave Worksurfaces
description w* wdepthleft
depthright t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
Smooth Wave 489 47 13/169 17 1/29 23 1/29 1 1/49 D1W S481824N $757. $837. $914. $1,323.
489 47 13/169 17 1/29 29 1/29 1 1/49 D1W S481830N 757. 837. 914. 1,327.
489 47 13/169 23 1/29 17 1/29 1 1/49 D1W S482418N 757. 837. 914. 1,337.
489 47 13/169 23 1/29 29 1/29 1 1/49 D1W S482430N 757. 837. 914. 1,341.
489 47 13/169 29 1/29 17 1/29 1 1/49 D1W S483018N 757. 837. 914. 1,346.
489 47 13/169 29 1/29 23 1/29 1 1/49 D1W S483024N 757. 837. 914. 1,351.
609 59 13/169 17 1/29 23 1/29 1 1/49 D1W S601824N 881. 968. 1,054. 1,356.
609 59 13/169 17 1/29 29 1/29 1 1/49 D1W S601830N 881. 968. 1,054. 1,362.
609 59 13/169 23 1/29 17 1/29 1 1/49 D1W S602418N 881. 968. 1,054. 1,367.
609 59 13/169 23 1/29 29 1/29 1 1/49 D1W S602430N 881. 968. 1,054. 1,375.
609 59 13/169 29 1/29 17 1/29 1 1/49 D1W S603018N 881. 968. 1,054. 1,384.
609 59 13/169 29 1/29 23 1/29 1 1/49 D1W S603024N 881. 968. 1,054. 1,388.
669 65 13/169 17 1/29 23 1/29 1 1/49 D1W S661824N 943. 1,036. 1,132. 1,393.
669 65 13/169 17 1/29 29 1/29 1 1/49 D1W S661830N 943. 1,036. 1,132. 1,396.
669 65 13/169 23 1/29 17 1/29 1 1/49 D1W S662418N 943. 1,036. 1,132. 1,403.
669 65 13/169 23 1/29 29 1/29 1 1/49 D1W S662430N 943. 1,036. 1,132. 1,409.
669 65 13/169 29 1/29 17 1/29 1 1/49 D1W S663018N 943. 1,036. 1,132. 1,417.
669 65 13/169 29 1/29 23 1/29 1 1/49 D1W S663024N 943. 1,036. 1,132. 1,420.
729 71 13/169 17 1/29 23 1/29 1 1/49 D1W S721824N 1,001. 1,098. 1,201. 1,427.
729 71 13/169 17 1/29 29 1/29 1 1/49 D1W S721830N 1,001. 1,098. 1,201. 1,431.
729 71 13/169 23 1/29 17 1/29 1 1/49 D1W S722418N 1,001. 1,098. 1,201. 1,439.
729 71 13/169 23 1/29 29 1/29 1 1/49 D1W S722430N 1,001. 1,098. 1,201. 1,450.
729 71 13/169 29 1/29 17 1/29 1 1/49 D1W S723018N 1,001. 1,098. 1,201. 1,456.
729 71 13/169 29 1/29 23 1/29 1 1/49 D1W S723024N 1,001. 1,098. 1,201. 1,460.
789 77 13/169 17 1/29 23 1/29 1 1/49 D1W S781824N 1,057. 1,166. 1,271. 1,465.
789 77 13/169 17 1/29 29 1/29 1 1/49 D1W S781830N 1,057. 1,166. 1,271. 1,469.
789 77 13/169 23 1/29 17 1/29 1 1/49 D1W S782418N 1,057. 1,166. 1,271. 1,470.
789 77 13/169 23 1/29 29 1/29 1 1/49 D1W S782430N 1,057. 1,166. 1,271. 1,476.
789 77 13/169 29 1/29 17 1/29 1 1/49 D1W S783018N 1,057. 1,166. 1,271. 1,482.
789 77 13/169 29 1/29 23 1/29 1 1/49 D1W S783024N 1,057. 1,166. 1,271. 1,488.
849 83 13/169 17 1/29 23 1/29 1 1/49 D1W S841824N 1,121. 1,230. 1,344. 1,492.
849 83 13/169 17 1/29 29 1/29 1 1/49 D1W S841830N 1,121. 1,230. 1,344. 1,499.
849 83 13/169 23 1/29 17 1/29 1 1/49 D1W S842418N 1,121. 1,230. 1,344. 1,507.
849 83 13/169 23 1/29 29 1/29 1 1/49 D1W S842430N 1,121. 1,230. 1,344. 1,513.
849 83 13/169 29 1/29 17 1/29 1 1/49 D1W S843018N 1,121. 1,230. 1,344. 1,517.
849 83 13/169 29 1/29 23 1/29 1 1/49 D1W S843024N 1,121. 1,230. 1,344. 1,524.
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1R 6030N, 114, 114
D1W Dividends Worksurface
S Smooth Wave Shape
72 Overall width in inches
30 Nominal depth at user’sleft side
24 Nominal depth at user’sright side
N No grommet
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurfaces
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• 1 Center-Located Edge Grommets• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommets, replacethe ‘‘N’’ suffix from the patternnumber with a ‘‘G’’.Add $29
Dividends Horizon
235
Wor
ksur
face
s
Faceted WorksurfacesFaceted Secondary Worksurfaces
description w* wdepthleft
depthright t pattern no.
LaminateABS edge band
209 Deep Secondary Desk, Left Hand 609 59 15/169 19 1/169 11 1/29 1 1/49 DVDS6020LN $708.
669 65 15/169 19 1/169 11 1/29 1 1/49 DVDS6620LN 763.
729 71 15/169 19 1/169 11 1/29 1 1/49 DVDS7220LN 822.
789 77 15/169 19 1/169 11 1/29 1 1/49 DVDS7820LN 878.
849 83 15/169 19 1/169 11 1/29 1 1/49 DVDS8420LN 933.
909 89 15/169 19 1/169 11 1/29 1 1/49 DVDS9020LN 991.
969 95 15/169 19 1/169 11 1/29 1 1/49 DVDS9620LN 1,047.
209 Deep Secondary Desk, Right Hand 609 59 15/169 11 1/29 19 1/169 1 1/49 DVDS6020RN 708.
669 65 15/169 11 1/29 19 1/169 1 1/49 DVDS6620RN 763.
729 71 15/169 11 1/29 19 1/169 1 1/49 DVDS7220RN 822.
789 77 15/169 11 1/29 19 1/169 1 1/49 DVDS7820RN 878.
849 83 15/169 11 1/29 19 1/169 1 1/49 DVDS8420RN 933.
909 89 15/169 11 1/29 19 1/169 1 1/49 DVDS9020RN 991.
969 95 15/169 11 1/29 19 1/169 1 1/49 DVDS9620RN 1,047.
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: DVDS6020LN,114, 114
DVD Dividends Worksurface
S Secondary, Faceted
60 Overall width in inches
20 Overall depth in inches
L Left or Right handed
N No grommet
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included With
Worksurfaces
Note: Faceted worksurfacesavailable in standard laminatesonly.
Options
Dividends Horizon
236
Faceted WorksurfacesFaceted Bench Worksurfaces
description w* wdepthleft
depthright t pattern no.
LaminateABS edge band
249 Deep Faceted Bench, Left Hand 609 59 15/169 23 1/29 17 1/29 1 1/49 DVDB6024LN $878.
669 65 15/169 23 1/29 17 1/29 1 1/49 DVDB6624LN 933.
729 71 15/169 23 1/29 17 1/29 1 1/49 DVDB7224LN 991.
789 77 15/169 23 1/29 17 1/29 1 1/49 DVDB7824LN 1,047.
849 83 15/169 23 1/29 17 1/29 1 1/49 DVDB8424LN 1,103.
909 89 15/169 23 1/29 17 1/29 1 1/49 DVDB9024LN 1,161.
969 95 15/169 23 1/29 17 1/29 1 1/49 DVDB9624LN 1,217.
249 Deep Faceted Bench, Right Hand 609 59 15/169 17 1/29 23 1/29 1 1/49 DVDB6024RN 878.
669 65 15/169 17 1/29 23 1/29 1 1/49 DVDB6624RN 933.
729 71 15/169 17 1/29 23 1/29 1 1/49 DVDB7224RN 991.
789 77 15/169 17 1/29 23 1/29 1 1/49 DVDB7824RN 1,047.
849 83 15/169 17 1/29 23 1/29 1 1/49 DVDB8424RN 1,103.
909 89 15/169 17 1/29 23 1/29 1 1/49 DVDB9024RN 1,161.
969 95 15/169 17 1/29 23 1/29 1 1/49 DVDB9624RN 1,217.
309 Deep Faceted Bench, Left Hand 609 59 15/169 29 1/29 19 1/169 1 1/49 DVDB6030LN 890.
669 65 15/169 29 1/29 19 1/169 1 1/49 DVDB6630LN 948.
729 71 15/169 29 1/29 19 1/169 1 1/49 DVDB7230LN 1,004.
789 77 15/169 29 1/29 19 1/169 1 1/49 DVDB7830LN 1,059.
849 83 15/169 29 1/29 19 1/169 1 1/49 DVDB8430LN 1,117.
909 89 15/169 29 1/29 19 1/169 1 1/49 DVDB9030LN 1,173.
969 95 15/169 29 1/29 19 1/169 1 1/49 DVDB9630LN 1,229.
309 Deep Faceted Bench, Right Hand 609 59 15/169 19 1/169 29 1/29 1 1/49 DVDB6030RN 890.
669 65 15/169 19 1/169 29 1/29 1 1/49 DVDB6630RN 948.
729 71 15/169 19 1/169 29 1/29 1 1/49 DVDB7230RN 1,004.
789 77 15/169 19 1/169 29 1/29 1 1/49 DVDB7830RN 1,059.
849 83 15/169 19 1/169 29 1/29 1 1/49 DVDB8430RN 1,117.
909 89 15/169 19 1/169 29 1/29 1 1/49 DVDB9030RN 1,173.
969 95 15/169 19 1/169 29 1/29 1 1/49 DVDB9630RN 1,229.
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: DVDB6024LN,114,114
DVD Dividends Worksurface
B Faceted, Bench
60 Overall width in inches
24 Overall depth in inches
L Left or right handed
N No grommet
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included With
Worksurfaces
Note: Faceted worksurfacesavailable in standard laminatesonly.
Options
Dividends Horizon
237
Wor
ksur
face
s
Trapezoidal Worksurfaces
description w* wdepthleft
depthright t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
Trapezoidal 489 47 13/169 23 1/29 29 1/29 1 1/49 D1W T482430N $757. $837. $914. $948.
489 47 13/169 29 1/29 23 1/29 1 1/49 D1W T483024N 757. 837. 914. 948.
609 59 13/169 23 1/29 29 1/29 1 1/49 D1W T602430N 881. 968. 1,054. 1,001.
609 59 13/169 29 1/29 23 1/29 1 1/49 D1W T603024N 881. 968. 1,054. 1,001.
669 65 13/169 23 1/29 29 1/29 1 1/49 D1W T662430N 943. 1,036. 1,132. 1,052.
669 65 13/169 29 1/29 23 1/29 1 1/49 D1W T663024N 943. 1,036. 1,132. 1,052.
729 71 13/169 23 1/29 29 1/29 1 1/49 D1W T722430N 1,001. 1,098. 1,201. 1,106.
729 71 13/169 29 1/29 23 1/29 1 1/49 D1W T723024N 1,001. 1,098. 1,201. 1,106.
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1W T482430N
D1W Dividends Worksurface
T Trapezoidal Shape
48 Overall Width, inches
24 Nominal depth at user’sleft side
30 Nominal depth at user’sright side
N No grommet
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurface
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• 1 Center-Located Edge Grommets• Woodgrain ABS edge• Metal edge• Techwood edge
To specify edge grommets replacethe ‘‘N’’ suffix from the patternnumber with a ‘‘G’’.Add $29.
Dividends Horizon
238
Corner WorksurfacesRectilinear and Split Top CornerMixed Depths
description 1 2 3 4 t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
Rectilinear Corner Worksurface No Grommets 369 369 189 189 1 1/49 D1C 3618N $582. $636. $694. $1,175.
369 369 249 249 1 1/49 D1C 3624N 591. 653. 710. 1,287.
429 429 249 249 1 1/49 D1C 4224N 667. 733. 795. 1,395.
489 489 249 249 1 1/49 D1C 4824N 758. 838. 915. 1,509.
489 489 309 309 1 1/49 D1C 4830N 785. 862. 943. 1,619.
Rectilinear Corner Worksurface. 249 DeepReturn Left 309 Deep Return Right No Grommets
429 429 249 309 1 1/49 D1C 422430N 695. 766. 837. 1,517.
489 489 249 309 1 1/49 D1C 482430N 790. 870. 952. 1,619.
Rectilinear Corner Worksurface. 309 DeepReturn Left 249 Deep Return Right No Grommets
429 429 309 249 1 1/49 D1C 423024N 695. 766. 837. 1,517.
489 489 309 249 1 1/49 D1C 483024N 790. 870. 952. 1,619.
Split Top Corner Worksurface No Grommets 429 429 249 249 1 1/49 D1CS 4224N 2,365. 2,598. 2,836. 4,018.
489 489 249 249 1 1/49 D1CS 4824N 2,433. 2,674. 2,918. 4,151.
489 489 309 309 1 1/49 D1CS 4830N 2,449. 2,695. 2,943. 4,287.
Note: Above 1, 2, 3, and 4 dimensions are all nominalActual dimensions are 1/29 less than shown above.
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Split Top Corner Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Worksurfaces
Example: D1C 423024N, 117, 115
D1C423024N
Pattern Number
117 Soft Grey Laminate
115 Medium Grey EdgeBand
Split Top Corner Worksurfaces
Example: D1CS 4224N, 117, 117
D1CS4224N
Pattern Number
117 Soft Grey Laminate
117 Soft Grey Edge Band
Included with:
Worksurfaces
• Worksurface• Panel-to-Worksurface Bracket
Split Top Corner Worksurfaces
• Front Worksurface• Back Worksurface• Split Top Mechanism• Flat Brackets• Panel-to-Worksurface Bracket
Note: When wood grain or brushedlaminates are specified on cornerworksurfaces where side 1 and 2 areof equal length, one of three graindirection options must be specified.Insert the desired grain directionoption (L,R or D) after the laminatecode. Please add $26 to the listprice for diagonal grain (D)selection.
Note: Techwood cornerworksurfaces with the samedimension on side 1 and side 2 havea diagonal grain direction. See graindirection page for more information.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• 2 Center-Located Edge Grommets• Woodgrain PVC edge• Metal edge• Techwood edge
To specify edge grommets, replacethe ‘‘N’’ suffix from the patternnumber with a ‘‘G’’.Add $29
Split Top Corner Worksurfaces
• 2 Center-Located Edge Grommets• Woodgrain PVC edge• Metal edge• Techwood edge
Note: Overdesk units are notcompatible with cornerworksurfaces.
Dividends Horizon
239
Wor
ksur
face
s
Corner WorksurfacesCurvilinear Corner ‘‘L’’ Shape - 249 Depths249 Depths
description 1 2 3 4 t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood edge
Curvilinear Corner ‘‘L’’ Shape Worksurface 249
Deep Returns Left and Right369 369 249 249 1 1/49 D1L 3636SSN $629. $691. $754. $1,452.
369 489 249 249 1 1/49 D1L 3648SSN 652. 725. 783. 1,586.
369 549 249 249 1 1/49 D1L 3654SSN 768. 847. 925. 1,637.
369 609 249 249 1 1/49 D1L 3660SSN 1,032. 1,148. 1,232. 1,617.
369 729 249 249 1 1/49 D1L 3672SSN 1,098. 1,210. 1,329. 1,887.
369 789 249 249 1 1/49 D1L 3678SSN 1,110. 1,233. 1,341. 2,001.
429 429 249 249 1 1/49 D1L 4242SSN 756. 836. 913. 1,540.
429 489 249 249 1 1/49 D1L 4248SSN 839. 930. 1,009. 1,660.
429 549 249 249 1 1/49 D1L 4254SSN 850. 949. 1,024. 1,683.
429 609 249 249 1 1/49 D1L 4260SSN 1,043. 1,147. 1,253. 1,717.
429 669 249 249 1 1/49 D1L 4266SSN 1,071. 1,187. 1,288. 1,763.
429 729 249 249 1 1/49 D1L 4272SSN 1,112. 1,223. 1,338. 1,851.
429 789 249 249 1 1/49 D1L 4278SSN 1,123. 1,236. 1,350. 1,938.
429 849 249 249 1 1/49 D1L 4284SSN 1,201. 1,261. 1,341. 1,938.
489 369 249 249 1 1/49 D1L 4836SSN 652. 725. 784. 1,587.
489 429 249 249 1 1/49 D1L 4842SSN 839. 930. 1,118. 1,662.
489 489 249 249 1 1/49 D1L 4848SSN 850. 943. 1,021. 1,626.
489 549 249 249 1 1/49 D1L 4854SSN 933. 1,032. 1,219. 1,770.
489 609 249 249 1 1/49 D1L 4860SSN 1,054. 1,162. 1,265. 1,807.
489 669 249 249 1 1/49 D1L 4866SSN 1,092. 1,203. 1,309. 1,896.
489 729 249 249 1 1/49 D1L 4872SSN 1,137. 1,246. 1,355. 1,980.
489 789 249 249 1 1/49 D1L 4878SSN 1,253. 1,375. 1,499. 2,025.
489 849 249 249 1 1/49 D1L 4884SSN 1,403. 1,544. 1,686. 2,067.
489 969 249 249 1 1/49 D1L 4896SSN 1,263. 1,312. 1,355. 2,025.
549 369 249 249 1 1/49 D1L 5436SSN 768. 847. 937. 1,598.
549 429 249 249 1 1/49 D1L 5442SSN 850. 949. 1,024. 1,683.
549 489 249 249 1 1/49 D1L 5448SSN 933. 1,032. 1,219. 1,770.
Note: Above 1, 2, 3, and 4 dimensions are all nominalActual dimensions are 1/29 less than shown above.
Ordering Information
1. Worksurfaces2. Pattern Number3. Top Finish Type4. Edge Finish
Order Code
Worksurfaces
Example: D1L 4860SSN, 117, 117
D1L4860SSN
Pattern Number
117 Soft Grey laminate
117 Soft Grey Edge Band
Included with:
Worksurfaces
• Worksurface• Panel-to-Worksurface Bracket
Note: When wood grain or brushedlaminates are specified on cornerworksurfaces where side 1 and 2 areof equal length, one of three graindirection options must be specified.Insert the desired grain directionoption (L,R or D) after the laminatecode. Please add $26 to the listprice for diagonal grain (D)selection.
Note: Techwood cornerworksurfaces with the samedimension on side 1 and side 2 havea diagonal grain direction. See graindirection page for more information.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• 2 center-located edge grommets• Woodgrain ABS edge• Metal edge• Techwood
To specify edge grommets, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’Add $29
Note: Overdesk units are notcompatible with cornerworksurfaces.
Dividends Horizon
240
Corner WorksurfacesCurvilinear Corner ‘‘L’’ Shape - 249 Depths249 Depths
description 1 2 3 4 t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood edge
Curvilinear Corner ‘‘L’’ Shape Worksurface 249
Deep Returns Left and Right609 369 249 249 1 1/49 D1L 6036SSN $1,032. $1,151. $1,232. $1,747.
609 429 249 249 1 1/49 D1L 6042SSN 1,043. 1,147. 1,253. 1,717.
609 489 249 249 1 1/49 D1L 6048SSN 1,054. 1,162. 1,265. 1,807.
669 429 249 249 1 1/49 D1L 6642SSN 1,071. 1,187. 1,288. 1,763.
669 489 249 249 1 1/49 D1L 6648SSN 1,092. 1,203. 1,309. 1,896.
729 369 249 249 1 1/49 D1L 7236SSN 1,085. 1,210. 1,329. 1,888.
729 429 249 249 1 1/49 D1L 7242SSN 1,112. 1,223. 1,338. 1,851.
729 489 249 249 1 1/49 D1L 7248SSN 1,137. 1,246. 1,355. 1,980.
789 369 249 249 1 1/49 D1L 7836SSN 1,110. 1,233. 1,341. 1,962.
789 429 249 249 1 1/49 D1L 7842SSN 1,123. 1,236. 1,350. 1,938.
789 489 249 249 1 1/49 D1L 7848SSN 1,253. 1,375. 1,499. 2,025.
849 429 249 249 1 1/49 D1L 8442SSN 1,201. 1,261. 1,348. 1,938.
849 489 249 249 1 1/49 D1L 8448SSN 1,403. 1,544. 1,686. 2,067.
969 489 249 249 1 1/49 D1L 9648SSN 1,263. 1,312. 1,233. 2,026.
Note: Above 1, 2, 3, and 4 dimensions are all nominalActual dimensions are 1/29 less than shown above.
Ordering Information
1. Worksurfaces2. Pattern Number3. Top Finish Type4. Edge Finish
Order Code
Worksurfaces
Example: D1L 4860SSN, 117, 117
D1L4860SSN
Pattern Number
117 Soft Grey laminate
117 Soft Grey Edge Band
Included with:
Worksurfaces
• Worksurface• Panel-to-Worksurface Bracket
Note: When wood grain or brushedlaminates are specified on cornerworksurfaces where side 1 and 2 areof equal length, one of three graindirection options must be specified.Insert the desired grain directionoption (L,R or D) after the laminatecode. Please add $26 to the listprice for diagonal grain (D)selection.
Note: Techwood cornerworksurfaces with the samedimension on side 1 and side 2 havea diagonal grain direction. See graindirection page for more information.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• 2 center-located edge grommets• Woodgrain ABS edge• Metal edge• Techwood
To specify edge grommets, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’Add $29
Note: Overdesk units are notcompatible with cornerworksurfaces.
Dividends Horizon
241
Wor
ksur
face
s
Corner WorksurfacesCurvilinear Corner ‘‘L’’ shape-Mixed DepthsMixed Depths
description 1 2 3 4 t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
Curvilinear Corner ‘‘L’’ Shape Worksurface. 309
Deep Returns Left and Right489 489 309 309 1 1/49 D1L 4848DDN $920. $1,012. $1,100. $1,645.
Curvilinear Corner ‘‘L’’ Shape Worksurface 249
Deep Return Left 309 Deep Return Right489 489 249 309 1 1/49 D1L 4848SDN 910. 1,000. 1,090. 1,645.
489 609 249 309 1 1/49 D1L 4860SDN 1,037. 1,143. 1,241. 1,689.
489 669 249 309 1 1/49 D1L 4866SDN 1,089. 1,199. 1,305. 1,729.
489 729 249 309 1 1/49 D1L 4872SDN 1,143. 1,257. 1,365. 1,774.
609 489 249 309 1 1/49 D1L 6048SDN 1,016. 1,117. 1,220. 1,821.
669 489 249 309 1 1/49 D1L 6648SDN 1,068. 1,173. 1,286. 1,866.
729 489 249 309 1 1/49 D1L 7248SDN 1,121. 1,233. 1,346. 1,907.
Curvilinear Corner ‘‘L’’ Shape Worksurface 309
Deep Return Left 249 Deep Return Right489 489 309 249 1 1/49 D1L 4848DSN 910. 1,000. 1,090. 1,645.
489 609 309 249 1 1/49 D1L 4860DSN 1,016. 1,117. 1,220. 1,689.
489 669 309 249 1 1/49 D1L 4866DSN 1,068. 1,173. 1,286. 1,729.
489 729 309 249 1 1/49 D1L 4872DSN 1,121. 1,233. 1,346. 1,774.
609 489 309 249 1 1/49 D1L 6048DSN 1,037. 1,143. 1,241. 1,821.
669 489 309 249 1 1/49 D1L 6648DSN 1,089. 1,199. 1,305. 1,866.
729 489 309 249 1 1/49 D1L 7248DSN 1,143. 1,257. 1,365. 1,907.
Note: Above 1, 2, 3, and 4 dimensions are all nominalActual dimensions are 1/29 less than shown above.
Ordering Information
Worksurfaces
1. Pattern Number2. Top Finish Type3. Edge Band Finish
Order Code
Worksurfaces
Example: D1L 4860SDN, 117, 117
D1L4860SDN
Pattern Number
117 Soft Grey Laminate
117 Soft Grey edge band
Included with:
Worksurfaces
• Worksurface• Panel-to-worksurface bracket
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• 2 center-located edge grommets• Woodgrain ABS edge• Metal edge• Techwood
To specify edge grommets, replacethe ‘‘N’’ suffix from the patternnumber with ‘‘G’’Add $29
Note: An overdesk unit will notalign with the width of a cornerworksurface due to the 1/29 wire dropgap. The overdesk will be 1/29 toowide.
Dividends Horizon
242
Peninsula Worsurfaces‘‘D’’, ‘‘P’’, ‘‘9’’ and Blended ‘‘D’’Mixed Depths
description type w * w d dia. t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood edge
‘‘D’’ Peninsula WorksurfaceLaminate No Grommets
729 71 13/169 29 13/169 1 1/49 D1D 7230N $1,008. $1,106. $1,208. $1,750.
789 77 13/169 29 13/169 1 1/49 D1D 7830N 1,012. 1,146. 1,170. 1,828.
789 77 13/169 35 13/169 1 1/49 D1D 7836N 1,036. 1,169. 1,197. 1,873.
849 83 13/169 23 13/169 1 1/49 D1D 8424N 1,042. 1,177. 1,203. 1,935.
849 83 13/169 29 13/169 1 1/49 D1D 8430N 1,068. 1,201. 1,229. 1,988.
849 83 13/169 35 13/169 1 1/49 D1D 8436N 1,092. 1,225. 1,253. 2,019.
969 95 13/169 23 13/169 1 1/49 D1D 9624N 1,093. 1,230. 1,261. 2,025.
729 71 13/169 35 13/169 1 1/49 D1D 7236N 1,100. 1,210. 1,323. 1,803.
969 95 13/169 29 13/169 1 1/49 D1D 9630N 1,119. 1,253. 1,284. 2,059.
969 95 13/169 35 13/169 1 1/49 D1D 9636N 1,144. 1,286. 1,316. 2,113.
309 29 13/169 23 13/169 1 1/49 D1D 3024N 512. 581. 640. 1,449.
309 29 13/169 29 13/169 1 1/49 D1D 3030N 536. 604. 667. 1,461.
369 35 13/169 23 13/169 1 1/49 D1D 3624N 536. 604. 667. 1,461.
369 35 13/169 29 13/169 1 1/49 D1D 3630N 561. 613. 690. 1,482.
489 47 13/169 23 13/169 1 1/49 D1D 4824N 624. 686. 748. 1,546.
549 53 13/169 23 13/169 1 1/49 D1D 5424N 682. 832. 1,040. 1,610.
489 47 13/169 29 13/169 1 1/49 D1D 4830N 686. 754. 827. 1,597.
549 53 13/169 29 13/169 1 1/49 D1D 5430N 744. 880. 977. 1,634.
549 53 13/169 35 13/169 1 1/49 D1D 5436N 804. 943. 1,037. 1,648.
609 59 13/169 23 13/169 1 1/49 D1D 6024N 806. 946. 1,043. 1,652.
609 59 13/169 35 13/169 1 1/49 D1D 6036N 832. 969. 1,069. 1,694.
669 65 13/169 23 13/169 1 1/49 D1D 6624N 832. 969. 1,069. 1,694.
669 65 13/169 35 13/169 1 1/49 D1D 6636N 856. 994. 1,092. 1,709.
609 59 13/169 29 13/169 1 1/49 D1D 6030N 878. 965. 1,052. 1,648.
669 65 13/169 29 13/169 1 1/49 D1D 6630N 957. 1,051. 1,147. 1,702.
729 71 13/169 23 13/169 1 1/49 D1D 7224N 964. 1,085. 1,184. 1,725.
789 77 13/169 23 13/169 1 1/49 D1D 7824N 988. 1,121. 1,147. 1,812.
Blended ‘‘D’’ Peninsula Worksurface(Left hand shown)
LH w/ 249
return depth609 59 13/169 47 13/169 1 1/49 D1BD6048SL 992. 1,098. 1,198. 3,584.
669 65 13/169 47 13/169 1 1/49 D1BD6648SL 1,018. 1,121. 1,222. 3,608.
729 71 13/169 41 13/169 1 1/49 D1BD7242SL 1,018. 1,121. 1,222. 3,632.
729 71 13/169 47 13/169 1 1/49 D1BD7248SL 1,040. 1,146. 1,250. 3,639.
789 77 13/169 47 13/169 1 1/49 D1BD7848SL 1,136. 1,260. 1,373. 3,652.
849 83 13/169 47 13/169 1 1/49 D1BD8448SL 1,184. 1,307. 1,421. 3,700.
LH w/ 309
return depth669 65 13/169 47 13/169 1 1/49 D1BD6648DL 1,071. 1,187. 1,288. 3,608.
w* = nominal widthDimensions listed under w d t are actual to the nearest 1/169
Ordering Information
‘‘D’’ Worksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
‘‘D’’ Worksurface
Example: D1H 6030, 114, 114
D1H 6030 Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurface
Note: Support column andpanel-to-worksurface brackets mustbe ordered separately.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Woodgrain ABS edge• Metal edge• Techwood edge
To specify an edge grommet, replace‘‘N’’ suffix from pattern number with‘‘G’’.Add $19.
Dividends Horizon
243
Wor
ksur
face
s
Peninsula Worsurfaces‘‘D’’, ‘‘P’’, ‘‘9’’ and Blended ‘‘D’’Mixed Depths
description type w * w d dia. t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood edge
Blended ‘‘D’’ Peninsula Worksurface(Left hand shown)
LH w/ 309
return depth729 71 13/169 41 13/169 1 1/49 D1BD7242DL $1,030. $1,134. $1,233. $3,644.
729 71 13/169 47 13/169 1 1/49 D1BD7248DL 1,111. 1,222. 1,337. 3,639.
789 77 13/169 47 13/169 1 1/49 D1BD7848DL 1,147. 1,271. 1,386. 3,664.
849 83 13/169 47 13/169 1 1/49 D1BD8448DL 1,197. 1,320. 1,434. 3,713.
RH w/ 249
return depth609 59 13/169 47 13/169 1 1/49 D1BD6048SR 992. 1,098. 1,198. 3,584.
669 65 13/169 47 13/169 1 1/49 D1BD6648SR 1,018. 1,121. 1,222. 3,608.
729 71 13/169 41 13/169 1 1/49 D1BD7242SR 1,018. 1,121. 1,222. 3,632.
729 71 13/169 47 13/169 1 1/49 D1BD7248SR 1,040. 1,146. 1,250. 3,639.
789 77 13/169 47 13/169 1 1/49 D1BD7848SR 1,136. 1,260. 1,373. 3,652.
849 83 13/169 47 13/169 1 1/49 D1BD8448SR 1,184. 1,307. 1,421. 3,700.
RH w/ 309
return depth669 65 13/169 47 13/169 1 1/49 D1BD6648DR 1,071. 1,187. 1,288. 3,608.
729 71 13/169 41 13/169 1 1/49 D1BD7242DR 1,030. 1,134. 1,233. 3,644.
729 71 13/169 47 13/169 1 1/49 D1BD7248DR 1,111. 1,222. 1,337. 3,639.
789 77 13/169 47 13/169 1 1/49 D1BD7848DR 1,147. 1,271. 1,386. 3,664.
849 83 13/169 47 13/169 1 1/49 D1BD8448DR 1,197. 1,320. 1,434. 3,713.
Conferencing worksurface(left hand shown)
609 59 13/169 489 249 1 1/49 DB1BD48SL 1,401. 1,543. 1,685. 3,573.
609 59 13/169 489 249 1 1/49 DB1BD48SR 1,401. 1,543. 1,685. 3,573.
Peninsula Worksurface-LaminateNo Grommets (9-shaped shown)
P-shaped 549 53 13/169 29 13/169 36 1 1/49 D1P 5430N 978. 1,074. 1,177. 2,200.
609 59 13/169 29 13/169 36 1 1/49 D1P 6030N 990. 1,085. 1,189. 2,262.
669 65 13/169 29 13/169 36 1 1/49 D1P 6630N 1,001. 1,098. 1,201. 2,311.
729 71 13/169 29 13/169 42 1 1/49 D1P 7230N 1,019. 1,122. 1,223. 2,376.
789 77 13/169 29 13/169 42 1 1/49 D1P 7830N 1,145. 1,260. 1,367. 2,441.
789 77 13/169 35 13/169 48 1 1/49 D1P 7836N 1,157. 1,272. 1,381. 2,489.
849 83 13/169 29 13/169 42 1 1/49 D1P 8430N 1,168. 1,284. 1,393. 2,516.
909 89 13/169 29 13/169 42 1 1/49 D1P 9030N 1,195. 1,308. 1,417. 2,558.
9-shaped 549 53 13/169 29 13/169 1 1/49 D19 5430N 978. 1,074. 1,177. 2,200.
w* = nominal widthDimensions listed under w d t are actual to the nearest 1/169
Ordering Information
‘‘D’’ Worksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
‘‘D’’ Worksurface
Example: D1H 6030, 114, 114
D1H 6030 Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurface
Note: Support column andpanel-to-worksurface brackets mustbe ordered separately.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Woodgrain ABS edge• Metal edge• Techwood edge
To specify an edge grommet, replace‘‘N’’ suffix from pattern number with‘‘G’’.Add $19.
Dividends Horizon
244
Peninsula Worsurfaces‘‘D’’, ‘‘P’’, ‘‘9’’ and Blended ‘‘D’’Mixed Depths
description type w * w d dia. t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood edge
Peninsula Worksurface-LaminateNo Grommets (9-shaped shown)
9-shaped 609 59 13/169 29 13/169 1 1/49 D19 6030N $990. $1,085. $1,189. $2,262.
669 65 13/169 29 13/169 1 1/49 D19 6630N 1,001. 1,098. 1,201. 2,311.
729 71 13/169 29 13/169 1 1/49 D19 7230N 1,019. 1,122. 1,223. 2,376.
789 77 13/169 29 13/169 1 1/49 D19 7830N 1,145. 1,260. 1,367. 2,441.
789 77 13/169 35 13/169 1 1/49 D19 7836N 1,157. 1,272. 1,381. 2,489.
849 83 13/169 29 13/169 1 1/49 D19 8430N 1,168. 1,284. 1,393. 2,516.
909 89 13/169 29 13/169 1 1/49 D19 9030N 1,195. 1,308. 1,417. 2,558.
w* = nominal widthDimensions listed under w d t are actual to the nearest 1/169
Ordering Information
‘‘D’’ Worksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
‘‘D’’ Worksurface
Example: D1H 6030, 114, 114
D1H 6030 Pattern Number
114 Folkstone GreyLaminate
114 Folkstone Grey EdgeBand
Included with:
Worksurface
Note: Support column andpanel-to-worksurface brackets mustbe ordered separately.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Worksurfaces
• Woodgrain ABS edge• Metal edge• Techwood edge
To specify an edge grommet, replace‘‘N’’ suffix from pattern number with‘‘G’’.Add $19.
Dividends Horizon
245
Wor
ksur
face
s
Curvilinear Half- and Corner-Round WorksurfacesMixed Depths
description type wreturndepth t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood edge
Curvilinear Half-Round Worksurface w/o panels 489 189 1 1/49 D1H4818 $542. $598. $653. $1,486.
w/o panels 609 249 1 1/49 D1H6024 747. 825. 894. 1,619.
w/panels 519 189 1 1/49 D1H5118P 551. 609. 663. 1,549.
w/panels 639 249 1 1/49 D1H6324P 755. 835. 912. 1,685.
Transition Worksurface w panels 519 249 1 1/49 D2H5124P 667. 733. 795. 1,726.
w panels 519 369 1 1/49 D2H5136P 678. 743. 816. 1,789.
w panels 519 489 1 1/49 D2H5148P 691. 757. 832. 1,840.
w/o panels 489 249 1 1/49 D2H4824 659. 719. 787. 1,561.
w/o panels 489 369 1 1/49 D2H4836 668. 734. 802. 1,619.
w/o panels 489 489 1 1/49 D2H4848 682. 748. 822. 1,673.
Corner Round Worksurface left 23 13/169 23 1/29 1 1/49 D1CRL24 426. 465. 506. 1,851.
notched 23 1/29 23 1/29 1 1/49 D1CRN24 426. 465. 506. 1,851.
right 23 13/169 23 1/29 1 1/49 D1CRR24 426. 465. 506. 1,851.
right 29 13/169 23 13/169 1 1/49 D1CRR30 449. 488. 530. 1,913.
Ordering Information
Half-Round Worksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Transition Worksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Corner-Round Worksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
Half-Round Worksurface
Example: D1H 5118P, 118, 118
D1H5118P
Pattern Number
118 Bright White Laminate
118 Bright White Edge Band
Transition Worksurface
Example: D2H 5136P, 117, 117
D2H5136P
Pattern Number
117 Soft Grey Laminate
117 Soft Grey Edge Band
Included with:
Half-Round Worksurface
• Worksurface• 2 flat brackets
Note: Support column must beordered separately.
Transition Worksurface
• Worksurface• 2 flat brackets
Note: Support column must beordered separately.
Corner Round Worksurface
• Worksurface
Note: 2 cantilevers must be orderedseparately.
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
Half-Round Worksurface
• Woodgrain ABS edge• Metal edge• Techwood edge
Transition Worksurface
• Woodgrain ABS edge• Metal edge• Techwood edge
Corner-Round Worksurface
• Woodgrain ABS edge• Metal edge• Techwood edge
Curvilinear Half-Round andTransition Worksurface Option
Add an ’F’ suffix to the patternnumber when using with flat profilepanel trim.
Dividends Horizon
246
Transaction Counter WorksurfacesRectangular, Square Corner and Quarter-round Corner159 Deep
description w * w d t pattern no.
laminate w/ABSedge
laminate w/woodgrain
edgelaminate w/metal edge
techwood w/techwood
edge
159 Deep Quarter-Round ShapeCorner Counter Worksurface
159 14 13/169 159 1 1/49 D1R 1515C $303. $336. $365. $1,223.
159 Deep Square-ShapeCorner Counter Worksurface
159 14 13/169 159 1 1/49 D1R 1515S 277. 309. 336. 765.
159 Deep Rectangular CounterWorksurface
249 23 13/169 159 1 1/49 D1R 2415 407. 444. 486. 925.
309 29 13/169 159 1 1/49 D1R 3015 440. 484. 525. 968.
369 35 13/169 159 1 1/49 D1R 3615 448. 495. 541. 1,012.
429 41 13/169 159 1 1/49 D1R 4215 449. 497. 545. 1,049.
489 47 13/169 159 1 1/49 D1R 4815 449. 497. 545. 1,095.
549 54 13/169 159 1 1/49 D1R 5415 470. 512. 567. 1,132.
609 59 13/169 159 1 1/49 D1R 6015 497. 550. 601. 1,177.
669 65 13/169 159 1 1/49 D1R 6615 512. 568. 622. 1,218.
729 71 13/169 159 1 1/49 D1R 7215 564. 622. 678. 1,261.
789 77 13/169 159 1 1/49 D1R 7815 601. 658. 718. 1,299.
849 83 13/169 159 1 1/49 D1R 8415 628. 692. 757. 1,342.
909 89 13/169 159 1 1/49 D1R 9015 661. 725. 790. 1,388.
969 95 13/169 159 1 1/49 D1R 9615 692. 763. 829. 1,426.
w* = nominal widthDimensions listed under w d are actual to the nearest 1/169
Ordering Information
15(D Counter Worksurface
1. Pattern Number2. Top Finish Type3. Edge Finish4. Counter Worksurface Bracket
Finish
Square-Shape Corner CounterWorksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Quarter-Round Shape CounterWorksurface
1. Pattern Number2. Top Finish Type3. Edge Finish
Order Code
15(D Counter Worksurface
Example: D1R 3615, 117, 117, 117
D1R 3615 Pattern Number
117 Soft Grey Laminate
117 Soft Grey Edge Band
117 Soft Grey Bracket Finish
Square-Shape CounterWorksurfaceExample: D1R 1515S, 117, 117
D1R1515S
Pattern Number
117 Soft Grey Laminate
117 Soft Grey Edge Band
Quarter-Round Shape CounterWorksurfaceExample: D1R 1515C, 117, 117
D1R1515C
Pattern Number
117 Soft Grey Laminate
117 Soft Grey Edge Band
Included with:
15(D Counter Worksurface
• Four counter worksurfacebrackets
• Attachment hardware
Square-Shape CounterWorksurface
• Three counter worksurface flatbrackets
• Attachment hardware
Quarter-Round Shape CounterWorksurface
• Two counter worksurface flatbrackets
• Attachment hardware
Note: An upcharge applies whenspecifying Legacy laminates. SeeLegacy finish page.
Options
15(D Counter Worksurface
• Woodgrain ABS edge• Metal edge• Techwood edge
Square-Shape CounterWorksurface
• Woodgrain ABS edge• Metal edge• Techwood edge
Quarter-Round Shape CounterWorksurface
• Woodgrain ABS edge• Metal edge• Techwood edge
Dividends Horizon
247
Wor
ksur
face
s
Postformed Worksurfaces, 13/49189 Deep
description type w d h pattern no. lam. V1 V2
Straight, 189D No grommet 309 17 5/89 1 3/49 MW2-S3018-B-( ) $680. $1,000. $1,407.
No grommet 369 17 5/89 1 3/49 MW2-S3618-B-( ) 747. 1,074. 1,515.
No grommet 429 17 5/89 1 3/49 MW2-S4218-B-( ) 824. 1,174. 1,685.
No grommet 489 17 5/89 1 3/49 MW2-S4818-B-( ) 923. 1,268. 1,827.
No grommet 549 17 5/89 1 3/49 MW2-S5418-B-( ) 989. 1,381. 1,966.
No grommet 609 17 5/89 1 3/49 MW2-S6018-B-( ) 1,020. 1,441. 2,108.
No grommet 669 17 5/89 1 3/49 MW2-S6618-B-( ) 1,132. 1,620. 2,352.
No grommet 729 17 5/89 1 3/49 MW2-S7218-B-( ) 1,231. 1,799. 2,566.
Order Code
Example: MW2-S3618-B-117
MW2 Worksurface 1 3/49 thick
S Worksurface type
36 Width
18 Depth
B No grommets
117 Surface finish
Specification Information
B: Worksurface does not includegrommets
Specify surface finish
All worksurfaces are U.L.-listed.
Application Notes
189D worksurfaces are usedinterchangeably in desk and panelsystem applications as shallow mainsurfaces, extensions, or credenzatops. They must be supported ateach end by a pedestal, end panel,end support cantilever or cantileverbridging bracket with a maximumspan of 609 between supports.
All worksurfaces have threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.
MW2- worksurfaces are supportedby brackets with machine screws.
Panel supported worksurfaces over609 must be mid-span supported byMB2-C18 bracket, specifiedseparately.
189D worksurfaces with desksupports or filler panels do notaccept pedestals.
All worksurfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
Dividends Horizon
248
Postformed Worksurfaces, 13/49249 Deep
description type w d h pattern no. lam. V1 V2
Straight, 249D Grommets 249 23 5/89 1 3/49 MW2-S2424-A-( ) $827. $1,244. $1,685.
Grommets 309 23 5/89 1 3/49 MW2-S3024-A-( ) 894. 1,282. 1,755.
Grommets 369 23 5/89 1 3/49 MW2-S3624-A-( ) 967. 1,351. 1,830.
Grommets 429 23 5/89 1 3/49 MW2-S4224-A-( ) 1,071. 1,416. 1,970.
Grommets 489 23 5/89 1 3/49 MW2-S4824-A-( ) 1,137. 1,558. 2,185.
Grommets 549 23 5/89 1 3/49 MW2-S5424-A-( ) 1,206. 1,692. 2,361.
Grommets 609 23 5/89 1 3/49 MW2-S6024-A-( ) 1,305. 1,803. 2,496.
Grommets 669 23 5/89 1 3/49 MW2-S6624-A-( ) 1,408. 1,970. 2,746.
Grommets 729 23 5/89 1 3/49 MW2-S7224-A-( ) 1,548. 2,143. 3,027.
Grommets 789 23 5/89 1 3/49 MW2-S7824-A-( ) 1,682. 2,314. 3,232.
Grommets 849 23 5/89 1 3/49 MW2-S8424-A-( ) 1,781. 2,487. 3,478.
Grommets 909 23 5/89 1 3/49 MW2-S9024-A-( ) 1,917. 2,695. 3,796.
Grommets 969 23 5/89 1 3/49 MW2-S9624-A-( ) 2,098. 2,971. 4,148.
Straight, 249D - No grommets No grommets 249 23 5/89 1 3/49 MW2-S2424-B-( ) 680. 1,100. 1,546.
No grommets 309 23 5/89 1 3/49 MW2-S3024-B-( ) 747. 1,140. 1,619.
No grommets 369 23 5/89 1 3/49 MW2-S3624-B-( ) 824. 1,207. 1,685.
No grommets 429 23 5/89 1 3/49 MW2-S4224-B-( ) 923. 1,268. 1,827.
No grommets 489 23 5/89 1 3/49 MW2-S4824-B-( ) 989. 1,410. 2,039.
No grommets 549 23 5/89 1 3/49 MW2-S5424-B-( ) 1,068. 1,550. 2,217.
No grommets 609 23 5/89 1 3/49 MW2-S6024-B-( ) 1,158. 1,662. 2,352.
No grommets 669 23 5/89 1 3/49 MW2-S6624-B-( ) 1,265. 1,827. 2,599.
No grommets 729 23 5/89 1 3/49 MW2-S7224-B-( ) 1,397. 2,002. 2,884.
No grommets 789 23 5/89 1 3/49 MW2-S7824-B-( ) 1,538. 2,169. 3,097.
No grommets 849 23 5/89 1 3/49 MW2-S8424-B-( ) 1,643. 2,342. 3,339.
No grommets 909 23 5/89 1 3/49 MW2-S9024-B-( ) 1,771. 2,553. 3,652.
No grommets 969 23 5/89 1 3/49 MW2-S9624-B-( ) 1,947. 2,829. 4,006.
Order Code
Example: MW2-S7224-A-117
MW2 Worksurface 1 3/49 thick
S Worksurface type
72 Width
24 Depth
A Grommets
117 Surface finish
Specification Information
Grommets / no grommets:
A: Worksurface includes 39
grommet in each back cornerleading into desk support or wiremanager.
B: Worksurface does not includegrommets
Specify surface finish
All worksurfaces are U.L.-listed.
Application Notes
249D worksurfaces are usedinterchangeably as shallow mainsurfaces, extensions or credenzatops. They must be supported ateach end by a pedestal, end panel,end support cantilever or cantileverbridging bracket with a maximumspan of 609 between supports.
All worksurfaces have threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.
MW2- worksurfaces are supportedby brackets with machine screws.
Use 189D pedestals with 249Dworksurface for full wiremanagement capability in desk orpanel applications.
189D worksurfaces with desksupports or filler panels do notaccept pedestals.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance or privacy screens.
Plastic laminate worksurfaces arepost-formed top and bottom, frontand back.
Worksurfaces with grommets arebored to accept and are shippedwith wire manager clips.
Panel supported worksurfaces over609 must be mid-span supported byMB2-C18 bracket, specifiedseparately.
Dividends Horizon
249
Pos
tfor
med
Postformed Worksurfaces, 13/49309 Deep
description type w d h pattern no. lam. V1 V2
Straight, 309D Grommets 309 29 5/89 1 3/49 MW2-S3030-A-( ) $996. $1,386. $1,938.
Grommets 369 29 5/89 1 3/49 MW2-S3630-A-( ) 1,101. 1,486. 2,080.
Grommets 429 29 5/89 1 3/49 MW2-S4230-A-( ) 1,167. 1,594. 2,217.
Grommets 489 29 5/89 1 3/49 MW2-S4830-A-( ) 1,268. 1,729. 2,387.
Grommets 549 29 5/89 1 3/49 MW2-S5430-A-( ) 1,333. 1,865. 2,523.
Grommets 609 29 5/89 1 3/49 MW2-S6030-A-( ) 1,408. 1,970. 2,746.
Grommets 669 29 5/89 1 3/49 MW2-S6630-A-( ) 1,516. 2,109. 2,987.
Grommets 729 29 5/89 1 3/49 MW2-S7230-A-( ) 1,682. 2,314. 3,232.
Grommets 789 29 5/89 1 3/49 MW2-S7830-A-( ) 1,819. 2,523. 3,511.
Grommets 849 29 5/89 1 3/49 MW2-S8430-A-( ) 1,956. 2,731. 3,835.
Grommets 909 29 5/89 1 3/49 MW2-S9030-A-( ) 2,130. 2,999. 4,253.
Grommets 969 29 5/89 1 3/49 MW2-S9630-A-( ) 2,333. 3,279. 4,671.
Straight, 309D - no grommets No Grommets 309 29 5/89 1 3/49 MW2-S3030-B-( ) 860. 1,243. 1,799.
No Grommets 369 29 5/89 1 3/49 MW2-S3630-B-( ) 959. 1,348. 1,937.
No Grommets 429 29 5/89 1 3/49 MW2-S4230-B-( ) 1,020. 1,441. 2,079.
No Grommets 489 29 5/89 1 3/49 MW2-S4830-B-( ) 1,128. 1,579. 2,246.
No Grommets 549 29 5/89 1 3/49 MW2-S5430-B-( ) 1,197. 1,726. 2,384.
No Grommets 609 29 5/89 1 3/49 MW2-S6030-B-( ) 1,265. 1,827. 2,599.
No Grommets 669 29 5/89 1 3/49 MW2-S6630-B-( ) 1,372. 1,966. 2,846.
No Grommets 729 29 5/89 1 3/49 MW2-S7230-B-( ) 1,538. 2,169. 3,097.
No Grommets 789 29 5/89 1 3/49 MW2-S7830-B-( ) 1,679. 2,384. 3,370.
No Grommets 849 29 5/89 1 3/49 MW2-S8430-B-( ) 1,815. 2,586. 3,687.
No Grommets 909 29 5/89 1 3/49 MW2-S9030-B-( ) 1,984. 2,856. 4,115.
No Grommets 969 29 5/89 1 3/49 MW2-S9630-B-( ) 2,181. 3,125. 4,531.
Order Code
Example: MW2-S4230-A-117
MW2 Worksurface 1 3/49 thick
S Worksurface type
42 Width
30 Depth
A Grommets
117 Surface finish
Specification Information
Grommets / no grommets:
A: Worksurface includes 39
grommet in each back cornerleading into desk support or wiremanager.
B: Worksurface does not includegrommets
Specify surface finish
All worksurfaces are U.L.-listed.
Application Notes
309D worksurfaces are usedinterchangeably in desk and panelsystem applications as mainsurfaces, extensions, or credenzatops. They must be supported ateach end by a pedestal, end panel,end support cantilever or cantileverbridging bracket with a maximumspan of 609 between supports.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance or privacy screens.
MW2- worksurfaces are supportedby brackets with machine screws.
Panel supported worksurfaces over609 must be mid-span supported byMB2-C18 bracket, specifiedseparately.
Plastic laminate worksurfaces arepost-formed top and bottom, frontand back.
Dividends Horizon
250
Postformed Worksurfaces, 13/49369 Deep
description type w d h pattern no. lam. V1 V2
Straight, 369D Recessed Grommet 669 35 3/49 1 3/49 MW2-S6636-R-( ) $1,849. $2,487. $3,411.
Recessed Grommet 729 35 3/49 1 3/49 MW2-S7236-R-( ) 1,956. 2,695. 3,796.
Recessed Grommet 789 35 3/49 1 3/49 MW2-S7836-R-( ) 2,130. 2,938. 4,038.
Straight, 369D - no grommets No Grommets 669 35 3/49 1 3/49 MW2-S6636-B-( ) 1,705. 2,342. 3,270.
No Grommets 729 35 3/49 1 3/49 MW2-S7836-B-( ) 1,815. 2,553. 3,652.
No Grommets 789 35 3/49 1 3/49 MW2-S7236-B-( ) 1,984. 2,797. 3,901.
Order Code
Example: MW2-S3636-R-117
MW2 Worksurface 1 3/49 thick
S Worksurface type
36 Width
36 Depth
R Recessed grommets
117 Surface finish
Specification Information
Grommet / no grommets:
B: worksurface does not includegrommetsR: worksurface includes 39
grommets recessed for use with 69
recessed desk support
Specify surface finish
All worksurfaces are U.L.-listed.
Application Notes
369D desk may be planned with 69
recessed desk support and 249Dpedestals or end panels, or 299 or359W universal end panels withkneehole filler. 369D worksurfacesdo not accept privacy screens.
Plastic laminate worksurfaces arepost-formed top and bottom, frontand back.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance or privacy screens.
MW2- worksurfaces are supportedby brackets with machine screws.
Panel supported worksurfaces over609 must be mid-span supported byMB2-C18 bracket, specifiedseparately.
Dividends Horizon
251
Pos
tfor
med
Postformed Worksurfaces, 13/49VDT conrers
description type w d h pattern no. lam. V1 V2
Corner Corner grommet only 35 5/89 17 5/89 1 3/49 MW2-V3618-A-( ) $1,755. $2,199. $3,104.
Corner grommet only 35 5/89 23 5/89 1 3/49 MW2-V3624-A-( ) 1,827. 2,230. 3,178.
Corner grommet only 41 5/89 23 5/89 1 3/49 MW2-V4224-A-( ) 1,891. 2,336. 3,310.
Corner grommet only 41 5/89 29 5/89 1 3/49 MW2-V4230-A-( ) 1,999. 2,473. 3,511.
Corner grommet only 47 5/89 23 5/89 1 3/49 MW2-V4824-A-( ) 2,233. 2,671. 3,901.
Corner grommet only 47 5/89 29 5/89 1 3/49 MW2-V4830-A-( ) 2,340. 2,873. 4,101.
Corner - 3 grommets 3 Grommets 35 5/89 23 5/89 1 3/49 MW2-V3624-C-( ) 1,970. 2,380. 3,311.
3 Grommets 41 5/89 23 5/89 1 3/49 MW2-V4224-C-( ) 2,034. 2,477. 3,456.
3 Grommets 41 5/89 29 5/89 1 3/49 MW2-V4230-C-( ) 2,143. 2,614. 3,659.
3 Grommets 47 5/89 23 5/89 1 3/49 MW2-V4824-C-( ) 2,372. 2,814. 4,038.
3 Grommets 47 5/89 29 5/89 1 3/49 MW2-V4830-C-( ) 2,484. 3,023. 4,247.
Order Code
Example: MW2-V4830-C-117
MW2 Worksurface 1 3/49 thick
V VDT corner
48 Width
30 Depth of return
C Three grommets
117 Surface finish
Specification Information
Grommets/no grommets:
A- VDT corner includes 39
grommet in back corner.C- VDT corner includes 39
grommet in all three backcorners.
Specify surface finish.VDT worksurfaces have threadedmetal inserts at all desk support andbracket locations.
MW2- worksurfaces are supportedby brackets with machine screws.
All worksurfaces are U.L.-listed.
All VDT corner worksurfaces arebored to accept and are shippedwith wire manager clips.
Application Notes
VDT corners may be usedinterchangeably in desk and panelsystem applications. They must besupported by VDT support bracketson each back edge or cantileverbridging brackets on each side edgeand a cantilever bracket on the backcorner.
369W x 189D VDT corners accept189D returns, 369, 429, and 489W x249D VDT corners accept 249Dreturns, 429 and 489W x 309D VDTcorners accept 309D returns.
VDT corners are 3/89 less thannominal depth for rear wireclearance or privacy screens.
Plastic laminate worksurfaces arepost-formed on front and backedges. 489 x 249 VDT corners havean inside radius, T-mold front edgethat curves into an optimal 45°straight keyboard location.
Dividends Horizon
252
Postformed Worksurfaces, 13/49Rounded end, 309 deep
description type w d h pattern no. lam. V1 V2
309D - End grommets 639 309 1 3/49 MW2-R6330E( ) $2,739. $3,590. $5,099.
759 309 1 3/49 MW2-R7530E( ) 2,844. 3,744. 5,242.
879 309 1 3/49 MW2-R8730E( ) 3,042. 3,868. 5,491.
309D - No grommets 639 309 1 3/49 MW2-R6330B( )(L/R) 2,587. 3,447. 4,952.
759 309 1 3/49 MW2-R7530B( )(L/R) 2,694. 3,586. 5,092.
879 309 1 3/49 MW2-R8730B( )(L/R) 2,899. 3,727. 5,343.
Order Code
Example: MW2-R8730E-117
MW2 Worksurface, 1 3/49 thick
R Rounded end
87 Width
30 Depth
E End grommets
117 Surface finish
Specification Information
Grommets/no grommets:
B- worksurface does not includegrommets.
E- rounded end worksurfaceincludes 39 grommet ineach straight end corner.
R- rounded end worksurfaceincludes 39 grommetsrecessed for use with 69
recessed desk support.Specify surface finish.
Rounded end worksurfaces withrecessed or no grommets arespecified left or right to determineposition of grommets and pedestaldrilling. Rounded end when seatedat desk defines L/R hand (Righthand shown above). Allworksurfaces are U.L.-listed.
Recessed grommets align with desksupport recessed 69.
Application Notes
Rounded end worksurfaces may beused to create fully enclosed desksor open table/desks with supportcolumn. For front modesty, use489W desk support with 639
rounded end, 609W desk supportwith 759 rounded end; 729W desksupport with 879 rounded end.
Use 189D pedestal or end paneleach end with 309D rounded endwith recessed grommets. Roundedend worksurfaces with endgrommets are supported by 309W or369W desk support and supportcolumn.
Worksurfaces with grommets arebored to accept and are shippedwith wire manager clips.
Worksurfaces with end grommetsmay not be supported by conferenceend panels.
Plastic laminate worksurfaces haveradiused T-mold edge.
Rounded end worksurfaces havethreaded metal inserts for desksupport, end panel each end, and atall bracket locations. End grommetworksurfaces have no pedestalinserts.
MW2- worksurfaces are supportedby brackets with machine screws.
Dividends Horizon
253
Pos
tfor
med
Postformed Worksurfaces, 11/49189 Deep
description type w d h pattern no. lam. V1 V2
Straight, 189D No grommet 309 17 5/89 1 1/49 MU1-S3018-B-( ) $528. $818. $1,197.
No grommet 369 17 5/89 1 1/49 MU1-S3618-B-( ) 585. 881. 1,288.
No grommet 429 17 5/89 1 1/49 MU1-S4218-B-( ) 611. 955. 1,423.
No grommet 489 17 5/89 1 1/49 MU1-S4818-B-( ) 718. 1,054. 1,560.
No grommet 549 17 5/89 1 1/49 MU1-S5418-B-( ) 747. 1,117. 1,660.
No grommet 609 17 5/89 1 1/49 MU1-S6018-B-( ) 782. 1,184. 1,795.
No grommet 669 17 5/89 1 1/49 MU1-S6618-B-( ) 845. 1,318. 1,987.
No grommet 729 17 5/89 1 1/49 MU1-S7218-B-( ) 943. 1,476. 2,190.
Order Code
Example: MU1-S4818-B-117
MU1 Worksurface 1 1/49 thick
S Worksurface type
48 Width
18 Depth
B No grommets
117 Surface finish
Specification Information
B: Worksurface does not includegrommets.
Specify surface finish.
1 1/49 worksurfaces are 3-ply, solidcore construction with threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.
All worksurfaces are U.L.-listed.
MU1- worksurfaces are supportedby brackets with machine screws.
Application Notes
189D worksurfaces are usedinterchangeably in desk and panelsystem applications as shallow mainsurfaces, extensions, or credenzatops. They may be supported at eachend by an 18 ‘‘ end support bracket,189 cantilever bracket, 189Wconference end panel, 189Dpedestal, or 129W end panel(MN2-E12) in conjunction with adesk support.
189D worksurfaces with desksupports do not accept pedestals.
All worksurfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
Panel-supported 1 1/49 worksurfacesover 489 must be mid-spansupported by MB2-C18 bracket,specified separately.
Suspended pedestals may not beused with 1 1/49 worksurfaces.
Dividends Horizon
254
Postformed Worksurfaces, 11/49249 Deep
description type w d h pattern no. lam. V1 V2
Straight, 249D Grommets 249 23 5/89 1 1/49 MU1-S2424-A-( ) $669. $1,068. $1,469.
Grommets 309 23 5/89 1 1/49 MU1-S3024-A-( ) 725. 1,097. 1,536.
Grommets 369 23 5/89 1 1/49 MU1-S3624-A-( ) 757. 1,123. 1,566.
Grommets 429 23 5/89 1 1/49 MU1-S4224-A-( ) 860. 1,194. 1,694.
Grommets 489 23 5/89 1 1/49 MU1-S4824-A-( ) 886. 1,286. 1,899.
Grommets 549 23 5/89 1 1/49 MU1-S5424-A-( ) 959. 1,416. 2,031.
Grommets 609 23 5/89 1 1/49 MU1-S6024-A-( ) 1,019. 1,485. 2,130.
Grommets 669 23 5/89 1 1/49 MU1-S6624-A-( ) 1,117. 1,658. 2,362.
Grommets 729 23 5/89 1 1/49 MU1-S7224-A-( ) 1,218. 1,778. 2,596.
Grommets 789 23 5/89 1 1/49 MU1-S7824-A-( ) 1,323. 1,937. 2,776.
Grommets 849 23 5/89 1 1/49 MU1-S8424-A-( ) 1,409. 2,076. 2,979.
Grommets 909 23 5/89 1 1/49 MU1-S9024-A-( ) 1,498. 2,207. 3,178.
Grommets 969 23 5/89 1 1/49 MU1-S9624-A-( ) 1,637. 2,415. 3,478.
Straight, 249D - No grommets No grommets 249 23 5/89 1 1/49 MU1-S2424-B-( ) 528. 923. 1,329.
No grommets 309 23 5/89 1 1/49 MU1-S3024-B-( ) 585. 955. 1,396.
No grommets 369 23 5/89 1 1/49 MU1-S3624-B-( ) 611. 989. 1,423.
No grommets 429 23 5/89 1 1/49 MU1-S4224-B-( ) 718. 1,054. 1,560.
No grommets 489 23 5/89 1 1/49 MU1-S4824-B-( ) 747. 1,151. 1,759.
No grommets 549 23 5/89 1 1/49 MU1-S5424-B-( ) 815. 1,283. 1,895.
No grommets 609 23 5/89 1 1/49 MU1-S6024-B-( ) 880. 1,348. 1,987.
No grommets 669 23 5/89 1 1/49 MU1-S6624-B-( ) 975. 1,516. 2,225.
No grommets 729 23 5/89 1 1/49 MU1-S7224-B-( ) 1,077. 1,645. 2,453.
No grommets 789 23 5/89 1 1/49 MU1-S7824-B-( ) 1,170. 1,795. 2,633.
No grommets 849 23 5/89 1 1/49 MU1-S8424-B-( ) 1,266. 1,936. 2,841.
No grommets 909 23 5/89 1 1/49 MU1-S9024-B-( ) 1,353. 2,069. 3,037.
No grommets 969 23 5/89 1 1/49 MU1-S9624-B-( ) 1,489. 2,269. 3,339.
Order Code
Example: MU1-S3024-B-117
MU1 Worksurface, 1 1/49 thick
S Straight worksurface
30 Width
24 Depth
B No grommets
117 Surface finish
Specification Information
Grommets/no grommets:
A- Worksurfaces include 39
grommet in each backcorner leading into desksupport or wire manager.
B- Worksurface does notinclude grommets.
Specify surface finish.1 1/49 worksurfaces are 3-ply, solidcore construction with threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.
Worksurfaces with grommets arebored to accept and are shippedwith wire manager clips.
All worksurfaces are U.L.-listed.
MU1- worksurfaces are supportedby brackets with machine screws.
Application Notes
249D worksurfaces are usedinterchangeably as shallow mainsurfaces, extensions or credenzatops. They can be supported at eachend by 249 end support bracket, 249
cantilever bracket, 249W end panel,189D pedestal or end panel inconjunction with desk support.
Use 189D pedestals with 249Dworksurfaces for full wiremanagement capability in desk orpanel applications.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance or privacy screens.
Panel-supported 1 1/49 worksurfacesover 489 must be mid-spansupported by MB2-C18 bracket,specified separately.
Suspended pedestals may not beused with 1 1/49 worksurfaces.
Dividends Horizon
255
Pos
tfor
med
Postformed Worksurfaces, 11/49309 Deep
description type w d h pattern no. lam. V1 V2
Straight, 309D Grommets 309 29 5/89 1 1/49 MU1-S3030-A-( ) $796. $1,156. $1,665.
Grommets 369 29 5/89 1 1/49 MU1-S3630-A-( ) 860. 1,227. 1,769.
Grommets 429 29 5/89 1 1/49 MU1-S4230-A-( ) 925. 1,326. 1,899.
Grommets 489 29 5/89 1 1/49 MU1-S4830-A-( ) 988. 1,416. 2,031.
Grommets 549 29 5/89 1 1/49 MU1-S5430-A-( ) 1,054. 1,548. 2,198.
Grommets 609 29 5/89 1 1/49 MU1-S6030-A-( ) 1,117. 1,658. 2,362.
Grommets 669 29 5/89 1 1/49 MU1-S6630-A-( ) 1,178. 1,750. 2,561.
Grommets 729 29 5/89 1 1/49 MU1-S7230-A-( ) 1,308. 1,914. 2,758.
Grommets 789 29 5/89 1 1/49 MU1-S7830-A-( ) 1,411. 2,076. 3,038.
Grommets 849 29 5/89 1 1/49 MU1-S8430-A-( ) 1,525. 2,237. 3,284.
Grommets 909 29 5/89 1 1/49 MU1-S9030-A-( ) 1,612. 2,377. 3,498.
Grommets 969 29 5/89 1 1/49 MU1-S9630-A-( ) 1,752. 2,582. 3,801.
Straight, 309D - no grommets No Grommets 309 29 5/89 1 1/49 MU1-S3030-B-( ) 656. 1,013. 1,528.
No Grommets 369 29 5/89 1 1/49 MU1-S3630-B-( ) 718. 1,085. 1,631.
No Grommets 429 29 5/89 1 1/49 MU1-S4230-B-( ) 782. 1,184. 1,759.
No Grommets 489 29 5/89 1 1/49 MU1-S4830-B-( ) 845. 1,283. 1,895.
No Grommets 549 29 5/89 1 1/49 MU1-S5430-B-( ) 906. 1,408. 2,063.
No Grommets 609 29 5/89 1 1/49 MU1-S6030-B-( ) 975. 1,516. 2,225.
No Grommets 669 29 5/89 1 1/49 MU1-S6630-B-( ) 1,036. 1,604. 2,422.
No Grommets 729 29 5/89 1 1/49 MU1-S7230-B-( ) 1,167. 1,772. 2,617.
No Grommets 789 29 5/89 1 1/49 MU1-S7830-B-( ) 1,268. 1,936. 2,899.
No Grommets 849 29 5/89 1 1/49 MU1-S8430-B-( ) 1,381. 2,094. 3,141.
No Grommets 909 29 5/89 1 1/49 MU1-S9030-B-( ) 1,477. 2,240. 3,357.
No Grommets 969 29 5/89 1 1/49 MU1-S9630-B-( ) 1,607. 2,441. 3,664.
Order Code
Example: MU1-S3030B-117
MU1 Worksurface, 1 1/49 thick
S Straight worksurface
30 Width
30 Depth
B No grommets
117 Surface finish
Specification Information
Grommets/no grommets:
A- Worksurfaces include 39
grommet in each backcorner leading into desksupport or wire manager.
B- Worksurface does notinclude grommets.
Specify surface finish.1 1/49 worksurfaces are 3-ply, solidcore construction with threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.
Worksurfaces with grommets arebored to accept and are shippedwith wire manager clips.
All worksurfaces are U.L.-listed.
MU1- worksurfaces are supportedby brackets with machine screws.
Plastic laminate worksurfaces arepost-formed top and bottom, frontand back.
Application Notes
309D worksurfaces are usedinterchangeably in desk and panelsystem applications as mainsurfaces, extensions or credenzatops. They can be supported at eachend by 309 end support bracket, 309
cantilever bracket, 309 flat bracket,309W end panel, 249D pedestal orend panel in conjunction with desksupport, or 309D pedestal.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance or privacy screens.
Panel-supported 1 1/49 worksurfacesover 489 must be mid-spansupported by MB2-C18 bracket,specified separately.
Worksurfaces with grommets arebored to accept and are shippedwith wire manager clips.
Suspended pedestals may not beused with 1 1/49 worksurfaces.
Dividends Horizon
256
Postformed Worksurfaces, 11/49VDT corners
description type w d h pattern no. lam. V1 V2
Corner Corner grommet only 35 5/89 17 5/89 1 1/49 MU1-V3618-A( ) $1,352. $1,772. $2,604.
Corner grommet only 35 5/89 23 5/89 1 1/49 MU1-V3624-A( ) 1,387. 1,806. 2,637.
Corner grommet only 41 5/89 23 5/89 1 1/49 MU1-V4224-A( ) 1,442. 1,871. 2,770.
Corner grommet only 41 5/89 29 5/89 1 1/49 MU1-V4230-A( ) 1,522. 1,967. 2,903.
Corner grommet only 47 5/89 23 5/89 1 1/49 MU1-V4824-A( ) 1,708. 2,123. 3,252.
Corner grommet only 47 5/89 29 5/89 1 1/49 MU1-V4830-A( ) 1,775. 2,290. 3,417.
Corner - 3 grommets 3 Grommets 35 5/89 23 5/89 1 1/49 MU1-V3624-C( ) 1,533. 1,946. 2,779.
3 Grommets 41 5/89 23 5/89 1 1/49 MU1-V4224-C( ) 1,592. 2,008. 2,910.
3 Grommets 41 5/89 29 5/89 1 1/49 MU1-V4230-C( ) 1,661. 2,104. 3,039.
3 Grommets 47 5/89 23 5/89 1 1/49 MU1-V4824-C( ) 1,845. 2,267. 3,399.
3 Grommets 47 5/89 29 5/89 1 1/49 MU1-V4830-C( ) 1,916. 2,427. 3,562.
Order Code
Example: MU1-V4830-C-117
MU1 Worksurface, 1 1/49 thick
V VDT corner
48 Width
30 Depth of return
C Three grommets
117 Surface finish
Specification Information
Grommets/no grommets:
A- VDT corner includes 39
grommet in back corner.C- VDT corner includes 39
grommet in all three backcorners.
Specify surface finish.1 1/49 VDT corners are solid coreconstruction with threaded metalinserts at desk support and allbracket locations.All worksurfacesare U.L.-listed.
MU1- worksurfaces are supportedby brackets with machine screws.
Application Notes
VDT corners may be usedinterchangeably in desk and panelsystem applications. They may besupported by VDT end supportbrackets on each back edge; theymay be supported by flat bracket orbridging bracket on each side edge.
369W x 189D VDT corners accept189D returns, 369, 429, and 489W x249D VDT corners accept 249Dreturns, 429 and 489W x 309D VDTcorners accept 309D returns.
VDT corners are 3/89 less thannominal depth for rear wireclearance or privacy screens.
489 x 249 VDT corners have aninside radius, T-mold front edge thatcurves into an optimal 45° straightkeyboard location.
Corner worksurfaces with equal rearedges have diagonal grain direction.
Dividends Horizon
257
Pos
tfor
med
Postformed Worksurfaces, 11/49split top VDT corners
description type w d h pattern no. lam. V1 V2
VDT Corner Corner grommet only 41 5/89 23 5/89 1 1/49 MU1-V42SS-A( ) $3,667. $4,069. $4,967.
Corner grommet only 47 5/89 23 5/89 1 1/49 MU1-V48SS-A( ) 3,923. 4,326. 5,453.
Corner grommet only 47 5/89 29 5/89 1 1/49 MU1-V48DS-A( ) 3,994. 4,490. 5,613.
VDT Corner - 3 grommets 3 Grommets 41 5/89 23 5/89 1 1/49 MU1-V42SS-C( ) 3,806. 4,208. 5,106.
3 Grommets 47 5/89 23 5/89 1 1/49 MU1-V48SS-C( ) 4,069. 4,466. 5,591.
3 Grommets 47 5/89 29 5/89 1 1/49 MU1-V48DS-C( ) 4,137. 4,634. 5,754.
Order Code
Example: MU1-V48SS-A-117
MU1 Worksurface, 1 1/49 thick
V VDT corner
48 Width
S Depth
S Split top
A Grommet
117 Surface finish
Specification Information
VDT Corner Depth:
S- 249D sidesD- 309D sides
Grommets/no grommets:
A- Grommets in back corners ofstraight tops, one backcorner of VDT
C- Grommets in all three backcorners of VDT
Specify surface finish.1 1/49 VDT corners are solid coreconstruction with threaded metalinserts at desk support and allbracket locations. All worksurfacesare U.L.-listed.MU1- worksurfaces are supportedby brackets with machine screws.
Application Notes
Split top worksurfaces includecounterbalanced adjustablekeyboard/ mouse support withfingertip control.
Front surface adjusts from 59 belowback surface to 79 above, andadjusts in tilt from -10° to +10°.
Split top surfaces may be panelsupported or desk supported withstandard brackets.
Specify 189D cantilever bracketswith 23 5/89 split corners, and 249Dcantilever or bridging brackets with29 5/89 D split corners.
489W split-top VDT corners mustbe supported by VDT-end supportkits in conjunction with cantileverbrackets at side edges.
Corner worksurfaces with equal rearedges have diagonal grain direction.
Dividends Horizon
258
Postformed Worksurfaces, 11/49Rounded end worksurfaces
description type w d h pattern no. lam. V1 V2
309D rounded end - No grommets 62 5/89 309 1 1/49 MU1-R6330B( )(L/R) $1,970. $2,797. $4,186.
74 5/89 309 1 1/49 MU1-R7530B( )(L/R) 2,037. 2,890. 4,275.
309D rounded end - End grommets 62 5/89 309 1 1/49 MU1-R6330E( ) 2,110. 2,938. 4,326.
74 5/89 309 1 1/49 MU1-R7530E( ) 2,181. 3,036. 4,424.
Order Code
Example: MU1-R6330E-117
MU1 Worksurface, 1 1/49 thick
R Rounded end
63 Width
30 Depth
E End grommets
117 Surface finish
Specification Information
Grommets/no grommets:
E- rounded end worksurfaceincludes 39 grommet ineach straight end corner.
R- rounded end worksurfaceincludes 39 grommetsrecessed for use with 69
recessed desk support.B- rounded end worksurface
does not include grommets
Specify surface finish.Rounded end worksurfaces withrecessed or no grommets arespecified left or right to determineposition of grommets and pedestaldrilling. Rounded end when seatedat desk defines L/R hand (Righthand shown above).
1 1/49 worksurfaces are 3-ply, solidcore construction with threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.
MU1- worksurfaces are supportedby brackets with machine screws.
All worksurfaces are U.L.-listed.
End grommeted tops have inserts toaccept desk support at straight endand no pedestal inserts.Plasticlaminate worksurfaces haveradiused T mold edge and a flatself-edge in the straight edge.
Application Notes
Rounded end worksurfaces are usedinterchangeably in desk and panelsystem applications as mainsurfaces or extensions. They may besupported by 309 end supportbrackets, 309 cantilever bracket,309 flat bracket or 309 conferenceend panel, and by a support columnat the rounded end.
Use 189D pedestal or end panel withdesk support under rounded endworksurfaces with recessedgrommets. Use 489D desk supportwith 639 rounded end and 609Wdesk support with 759 rounded end.
Worksurfaces with end grommetsmay not be supported by conferenceend panel.
Suspended pedestals may not beused with 1 1/49 worksurfaces.
Rounded end worksurfaces havethreaded metal inserts for desksupport, end panel each end, and atall bracket locations. End grommetworksurfaces have no pedestalinserts.
Dividends Horizon
259
Pos
tfor
med
Postformed Worksurfaces, 11/49conference shapes
description type w d h pattern no. lam. V1 V2
Half round - Standard 309 489 1 1/49 MU1-R3048-B-( ) $1,438. $2,055. $2,922.
Half round - With vertical panel 50 3/89 489 1 1/49 MU1-R3050-B-( ) 1,597. 2,254. 3,222.
Order Code
Example: MU1-R3050B-117
MU1 Worksurface, 1 1/49 thick
R Rounded end
30 Width
50 Depth
B No grommet
117 Surface finish
Specification Information
Grommets/no grommets:
B- worksurface does not includegrommets.
Specify surface finish.
1 1/49 worksurfaces are 3-ply, solidcore construction with threadedmetal inserts at all end panel, desksupport and bracket locations andpilot holes at pedestal locations.
MU1- worksurfaces are supportedby brackets with machine screws.
Plastic laminate worksurfaces haveradiused T mold edge.
All worksurfaces are U.L.-listed.
Application Notes
Half-round and extended half-roundare used with back-to-back 249Dstraight or VDT cornerworksurfaces. Half round withvertical panel attaches to 249Dstraight or VDT corner worksurfacessupported by vertical panel.
Conference worksurfaces must besupported by support column andflat bracket or bridging bracket toadjacent worksurface.
Dividends Horizon
260
Postformed Worksurfaces, 11/49P-shape curvilinear
description type w d h pattern no. lam. V1 V2
Rounded end left 249 D return 489 729 1 1/49 MU1-P72SA( )L $3,672. $4,717. $6,610.
309 D return 489 789 1 1/49 MU1-P78DA( )L 3,826. 4,923. 6,893.
Rounded end right 249 D return 489 729 1 1/49 MU1-P72SA( )R 3,672. 4,717. 6,610.
309 D return 489 789 1 1/49 MU1-P78DA( )R 3,826. 4,923. 6,893.
Order Code
Example: MU1-P72SA-117L
MU1 Worksurface, 1 1/49
P P-shape curvilinear
72 Overall length
S Depth of return
A Grommets
117 Surface finish
L Rounded end left
Specification Information
S- 249D side edgeD- 309D side edge
Specify surface finish.
1 1/49 curvilinear surfaces are solidcore construction with threadedmetal inserts at desk support and allbracket locations.
MU1- worksurfaces are supportedby brackets with machine screws.
All worksurfaces are U.L.-listed.
All P-shape worksurfaces have 2grommets at 489 end for use with489 desk and overhead supports.
Application Notes
P-shape curvilinear worksurfacesmay be used interchangeably indesk and panel system applications.They may be supported by a 489
VDT support bracket kit, or 489
desk support and 69 end panel, inconjunction with rounded endsupport column. Use flat bracket orbridging bracket to join to adjacent1 1/49 worksurface.
P-shape laminate surfaces havecontinuous T-mold edge in profile tomatch adjacent 1 1/49 worksurfaces.
Dividends Horizon
261
Pos
tfor
med
Postformed Worksurfaces, 11/49L-shape curvilinear
description type w d h pattern no. lam. V1 V2
249 D returns left and right 3 grommet 429 429 1 1/49 MU1-C4242SS( ) $1,681. $2,165. $3,033.
3 grommet 489 489 1 1/49 MU1-C4848SS( ) 1,832. 2,362. 3,299.
3 grommet 489 609 1 1/49 MU1-C4860SS( ) 2,082. 2,675. 3,751.
3 grommet 489 729 1 1/49 MU1-C4872SS( ) 2,387. 3,079. 4,319.
3 grommet 609 489 1 1/49 MU1-C6048SS( ) 2,082. 2,675. 3,751.
3 grommet 729 489 1 1/49 MU1-C7248SS( ) 2,387. 3,079. 4,319.
249 D return left, 309 D right 3 grommet 489 489 1 1/49 MU1-C4848SD( ) 1,832. 2,362. 3,299.
3 grommet 489 609 1 1/49 MU1-C4860SD( ) 2,082. 2,675. 3,751.
3 grommet 489 729 1 1/49 MU1-C4872SD( ) 2,387. 3,079. 4,319.
3 grommet 609 489 1 1/49 MU1-C6048SD( ) 2,082. 2,675. 3,751.
3 grommet 729 489 1 1/49 MU1-C7248SD( ) 2,387. 3,079. 4,319.
309 D return left, 249 D right 3 grommet 489 489 1 1/49 MU1-C4848DS( ) 1,832. 2,362. 3,299.
3 grommet 489 609 1 1/49 MU1-C4860DS( ) 2,082. 2,675. 3,751.
3 grommet 489 729 1 1/49 MU1-C4872DS( ) 2,387. 3,079. 4,319.
3 grommet 609 489 1 1/49 MU1-C6048DS( ) 2,082. 2,675. 3,751.
3 grommet 729 489 1 1/49 MU1-C7248DS( ) 2,387. 3,079. 4,319.
309 D returns left and right 3 grommet 489 489 1 1/49 MU1-C4848DD( ) 1,832. 2,362. 3,299.
Order Code
Example: MU1-C4860SD-117
MU1 Worksurface, 1 1/49
C L-shape curvilinear
48 Width left
60 Width right
S Depth of left return
D Depth of right return
117 Surface finish
Specification Information
Width dimension (W) refers to widthof left-side back edge; depthdimension (D) indicates width ofright-side back edge.
S- 249D side edgeD- 309D side edge
Specify surface finish.
1 1/49curvilinear surfaces are solidcore construction with threadedmetal inserts at desk support and allbracket locations.MU1- worksurfaces are supportedby brackets with machine screws.
All worksurfaces are U.L.-listed.
All L-shape curvilinearworksurfaces have three grommets.
Corner worksurfaces with equal rearedges have diagonal grain direction.
L-shape worksurfaces have graindirection along the longer backedge.
Application Notes
L-shape curvilinear worksurfacesmay be used interchangeably indesk and panel system applications.They may be supported by cornerdesk supports or by VDT endsupport bracket kit. Use cantileverbridging brackets or flat brackets tojoin to adjacent worksurfaces.
L-shape surfaces may also besupported by MN1- end panel inconjunction with desk support, orcantilever bracket in panelplanning.
L-shape surfaces are veneer orpost-formed plastic laminate onboth back edges, matching profileT-mold on curvilinear front, andself-edge on sides.
Curvilinear worksurfaces areavailable only in 1 1/49 thickness.
L-shape surfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
If specifying privacy screens onboth back edges, one or both mustbe 489 back-of-VDT type.
Dividends Horizon
262
Postformed Worksurfaces, 11/49120° corners90° return
description w return h pattern no. lam. V1 V2
90° returnLeft hand - grommet
369 249 1 1/49 MU1-Y36S-AL-( )( ) $1,265. $1,771. $2,153.
429 249 1 1/49 MU1-Y42S-AL-( )( ) 1,331. 2,144. 2,831.
489 249 1 1/49 MU1-Y48S-AL-( )( ) 1,482. 2,361. 3,546.
609 249 1 1/49 MU1-Y60S-AL-( )( ) 1,802. n/a n/a
90° returnRight hand - grommet
369 249 1 1/49 MU1-Y36S-AR-( )( ) 1,265. 1,771. 2,153.
429 249 1 1/49 MU1-Y42S-AR-( )( ) 1,331. 2,144. 2,831.
489 249 1 1/49 MU1-Y48S-AR-( )( ) 1,482. 2,361. 3,546.
609 249 1 1/49 MU1-Y60S-AR-( )( ) 1,802. n/a n/a
Transitional 249 1 1/49 MU1-YTS-( )( ) 1,003. 1,318. 1,711.
Order Code
Example: MU1-Y48S-A-R-L-117
MU1 Worksurface, 1 1/49 thick
Y 120° corner,90° returns
48 Width
S 249D return
A Grommets
R Right hand
L Laminate
117 Surface finish
Specification Information
Width dimension (w) refers to widthof both back edges.
Specify surface finish.
1 1/49 worksurfaces are solid coreconstruction with threaded metalinserts at desk supports and allstandard bracket locations.
MU1- worksurfaces are supportedby brackets with machine screws.
Grommets/no grommets:
A- worksurface includes 2grommets in 2 backcorners, creating Left- andRight-hand applications(see illustration).
B- worksurface does not includegrommets. Worksurfaceswith no grommets are nothanded.
Application Notes
Worksurfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
120° worksurfaces with 90° returnsare used mainly in panel systemapplications. They can besuppported at each end with 249 endsupport brackets, 249 cantileverbracket, 249W end panel, 189D and249D pedestal or end panel inconjunction with desk supports.
120° corner is supported by astandard ( 90° ) 249D cantileverbracket.
Use cantilever bridging brackets tojoin to adjacent worksurface or totransitional 120° worksurface.
Transitional worksurfaces connecttwo 120° corner tops with 90°returns.
Corner worksurfaces have diagonalgrain direction.
Dividends Horizon
263
Pos
tfor
med
Postformed Worksurfaces, 11/49120° cornersMeeting Corners
description w return h pattern no. lam.
Meeting cornerLeft hand - grommet
489 249 1 1/49 MU1-M48S-AL-( )( ) $1,528.
Meeting cornerRigh hand - grommet
489 249 1 1/49 MU1-M48S-AR-( )( ) 1,528.
Order Code
Example: MU1-M48S-A-L-L-117
MU1 Worksurface, 1 1/49 thick
M Meeting corner
48 Width
S 249D return
A Grommets
L Left hand
L Laminate
117 Surface finish
Specification Information
Width dimension (w) refers to widthof smaller back edge. Total width ofback edge with rounded meetingarea is 62 1/29.
Specify surface finish.
1 1/49 worksurfaces are solid coreconstruction with threaded metalinserts at desk supports and allstandard bracket locations.
MU1- worksurfaces are supportedby brackets with machine screws.
Grommets/no grommets:
A- worksurface includes 2grommets in 2 backcorners.
B- worksurface does not includegrommets.
Application Notes
Worksurfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
120° meeting worksurfaces are usedmainly in panel system applications.Support at the rounded meeting endwith a support column, specifiedseparately. They can be supported atthe other end by 249 end supportbrackets, 249 cantilever bracket,249W end panel, 189D and 249Dpedestal or end panel in conjunctionwith desk supports. Network straightdesk support may be used under the48W back edge.
120° corner is supported by 249Dcantilever bracket.
Use 249D cantilever bridgingbrackets to join to adjacentworksurfaces.
Dividends Horizon
264
Postformed Options worksurfaces 11/49189 Deep
description w d h pattern no. lam. V1 V2
Straight, 189D - Grommet 1089 17 5/89 1 1/49 LU1-S10818-A-( ) $1,078. $1,711. $2,619.
1209 17 5/89 1 1/49 LU1-S12018-A-( ) 1,178. 1,844. 2,841.
309 17 5/89 1 1/49 LU1-S3018-A-( ) 429. 718. 1,074.
369 17 5/89 1 1/49 LU1-S3618-A-( ) 452. 745. 1,136.
429 17 5/89 1 1/49 LU1-S4218-A-( ) 509. 836. 1,284.
489 17 5/89 1 1/49 LU1-S4818-A-( ) 564. 881. 1,366.
549 17 5/89 1 1/49 LU1-S5418-A-( ) 614. 972. 1,485.
609 17 5/89 1 1/49 LU1-S6018-A-( ) 674. 1,060. 1,640.
669 17 5/89 1 1/49 LU1-S6618-A-( ) 725. 1,169. 1,817.
729 17 5/89 1 1/49 LU1-S7218-A-( ) 780. 1,286. 1,967.
789 17 5/89 1 1/49 LU1-S7818-A-( ) 835. 1,352. 2,074.
849 17 5/89 1 1/49 LU1-S8418-A-( ) 886. 1,420. 2,176.
909 17 5/89 1 1/49 LU1-S9018-A-( ) 942. 1,516. 2,319.
969 17 5/89 1 1/49 LU1-S9618-A-( ) 996. 1,597. 2,449.
Straight, 189D - No Grommet 1089 17 5/89 1 1/49 LU1-S10818-B-( ) 1,025. 1,660. 2,567.
1209 17 5/89 1 1/49 LU1-S12018-B-( ) 1,132. 1,799. 2,787.
309 17 5/89 1 1/49 LU1-S3018-B-( ) 375. 667. 1,014.
369 17 5/89 1 1/49 LU1-S3618-B-( ) 405. 693. 1,078.
429 17 5/89 1 1/49 LU1-S4218-B-( ) 452. 780. 1,229.
489 17 5/89 1 1/49 LU1-S4818-B-( ) 510. 836. 1,318.
549 17 5/89 1 1/49 LU1-S5418-B-( ) 564. 923. 1,434.
609 17 5/89 1 1/49 LU1-S6018-B-( ) 615. 1,007. 1,584.
669 17 5/89 1 1/49 LU1-S6618-B-( ) 674. 1,118. 1,761.
729 17 5/89 1 1/49 LU1-S7218-B-( ) 725. 1,231. 1,914.
789 17 5/89 1 1/49 LU1-S7818-B-( ) 781. 1,304. 2,016.
849 17 5/89 1 1/49 LU1-S8418-B-( ) 835. 1,368. 2,123.
909 17 5/89 1 1/49 LU1-S9018-B-( ) 890. 1,465. 2,265.
969 17 5/89 1 1/49 LU1-S9618-B-( ) 942. 1,546. 2,402.
Order Code
Example: LU1-S4818-B-117
LU1 Worksurface, 1 1/49 thick
S Straight worksurface
48 Width
18 Depth
B No grommet
117 Surface finish
Specification Information
Grommet/no grommet:
A- worksurface includes oneedge grommet
B- worksurface does not includegrommet
Specify surface finish.
1 1/49 Options worksurfaces are3-ply, solid core construction withpilot holes at all pedestal, endpanel, and bracket locations.
Edge grommets are centered at rearof worksurface.
LU1- worksurfaces are supported bybrackets with wood screws.
Application Notes
189D worksurfaces are used inpanel system applications asshallow main surfaces, extensions orcredenza tops. They may besupported at each end by an 189 endsupport bracket, 189 cantileverbracket, 189W desk end panel or189D pedestal.
Options worksurfaces cannot beused in conjunction with Networkdesk supports.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance.
Panel-supported 1 1/49 worksurfacesover 489 must be mid-spansupported by MB2-C18 bracket,specified separately.
Panel-supported 1 1/49 worksurfacesover 969 must be pedestal orMB2-C24 cantilever bracketsupported every 489.
Suspended pedestals may not beused with 1 1/49 worksurfaces.
Dividends Horizon
265
Pos
tfor
med
Postformed Options worksurfaces 11/49249 Deep
description w d h pattern no. lam. V1 V2
Straight, 249D - Grommet 909 23 5/89 1 1/49 LU1-S9024-A-( ) $1,020. $1,676. $2,548.
969 23 5/89 1 1/49 LU1-S9624-A-( ) 1,078. 1,770. 2,690.
1089 23 5/89 1 1/49 LU1-S10824-A-( ) 1,178. 1,879. 2,881.
1209 23 5/89 1 1/49 LU1-S12024-A-( ) 1,293. 2,053. 3,117.
249 23 5/89 1 1/49 LU1-S2424-A-( ) 483. 864. 1,244.
309 23 5/89 1 1/49 LU1-S3024-A-( ) 509. 891. 1,283.
369 23 5/89 1 1/49 LU1-S3624-A-( ) 540. 927. 1,307.
429 23 5/89 1 1/49 LU1-S4224-A-( ) 592. 956. 1,396.
489 23 5/89 1 1/49 LU1-S4824-A-( ) 648. 1,029. 1,579.
549 23 5/89 1 1/49 LU1-S5424-A-( ) 700. 1,144. 1,726.
609 23 5/89 1 1/49 LU1-S6024-A-( ) 756. 1,202. 1,812.
669 23 5/89 1 1/49 LU1-S6624-A-( ) 810. 1,324. 1,995.
729 23 5/89 1 1/49 LU1-S7224-A-( ) 864. 1,405. 2,179.
789 23 5/89 1 1/49 LU1-S7824-A-( ) 911. 1,444. 2,270.
849 23 5/89 1 1/49 LU1-S8424-A-( ) 971. 1,573. 2,394.
Straight, 249D - No Grommet 969 23 5/89 1 1/49 LU1-S9624-B-( ) 1,025. 1,714. 2,638.
1089 23 5/89 1 1/49 LU1-S10824-B-( ) 1,132. 1,826. 2,828.
1209 23 5/89 1 1/49 LU1-S12024-B-( ) 1,236. 1,998. 3,064.
249 23 5/89 1 1/49 LU1-S2424-B-( ) 429. 807. 1,202.
309 23 5/89 1 1/49 LU1-S3024-B-( ) 452. 842. 1,227.
369 23 5/89 1 1/49 LU1-S3624-B-( ) 486. 871. 1,253.
429 23 5/89 1 1/49 LU1-S4224-B-( ) 540. 902. 1,341.
489 23 5/89 1 1/49 LU1-S4824-B-( ) 592. 974. 1,528.
549 23 5/89 1 1/49 LU1-S5424-B-( ) 649. 1,095. 1,672.
609 23 5/89 1 1/49 LU1-S6024-B-( ) 700. 1,147. 1,757.
669 23 5/89 1 1/49 LU1-S6624-B-( ) 757. 1,267. 1,944.
729 23 5/89 1 1/49 LU1-S7224-B-( ) 810. 1,351. 2,129.
789 23 5/89 1 1/49 LU1-S7824-B-( ) 864. 1,394. 2,220.
849 23 5/89 1 1/49 LU1-S8424-B-( ) 914. 1,520. 2,342.
909 23 5/89 1 1/49 LU1-S9024-B-( ) 971. 1,630. 2,494.
Order Code
Example: LU1-S3024-B-117
LU1 Worksurface, 1 1/49 thick
S Straight worksurface
30 Width
24 Depth
B No grommet
117 Surface finish
Specification Information
Grommet/no grommet:
A- worksurface includes oneedge grommet
B- worksurface does not includegrommet
Specify surface finish.
1 1/49 Options worksurfaces are3-ply, solid core construction withpilot holes at all pedestal, endpanel, and bracket locations.
Edge grommets are centered at rearof worksurface.
LU1- worksurfaces are supported bybrackets with wood screws.
249D worksurfaces are usedinterchangeably as shallow mainsurfaces, extensions or credenzatops.
They can be supported at each endby 249 end support bracket, 249
cantilever bracket, 249W end panelor 189D pedestal.
Application Notes
Options worksurfaces cannot beused in conjunction with Networkdesk supports.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance.
Panel-supported 1 1/49 worksurfacesover 489 must be mid-spansupported by MB2-C18 bracket,specified separately.
Panel-supported 1 1/49 worksurfacesover 969 must be pedestal orMB2-C24 cantilever bracketsupported every 489.
Suspended pedestals may not beused with 1 1/49 worksurfaces.
Dividends Horizon
266
Postformed Options worksurfaces 11/49309 Deep
description w d h pattern no. lam. V1 V2
Straight, 309D - Grommet 309 29 5/89 1 1/49 LU1-S3030-A-( ) $564. $904. $1,397.
369 29 5/89 1 1/49 LU1-S3630-A-( ) 614. 971. 1,482.
429 29 5/89 1 1/49 LU1-S4230-A-( ) 674. 1,060. 1,599.
489 29 5/89 1 1/49 LU1-S4830-A-( ) 725. 1,143. 1,720.
549 29 5/89 1 1/49 LU1-S5430-A-( ) 780. 1,260. 1,872.
609 29 5/89 1 1/49 LU1-S6030-A-( ) 835. 1,348. 2,020.
669 29 5/89 1 1/49 LU1-S6630-A-( ) 886. 1,426. 2,202.
729 29 5/89 1 1/49 LU1-S7230-A-( ) 971. 1,541. 2,345.
789 29 5/89 1 1/49 LU1-S7830-A-( ) 1,020. 1,609. 2,466.
849 29 5/89 1 1/49 LU1-S8430-A-( ) 1,078. 1,700. 2,599.
909 29 5/89 1 1/49 LU1-S9030-A-( ) 1,132. 1,788. 2,714.
969 29 5/89 1 1/49 LU1-S9630-A-( ) 1,178. 1,879. 2,855.
Straight, 309D - No grommet 309 29 5/89 1 1/49 LU1-S3030-B-( ) 510. 862. 1,343.
369 29 5/89 1 1/49 LU1-S3630-B-( ) 564. 921. 1,430.
429 29 5/89 1 1/49 LU1-S4230-B-( ) 615. 1,007. 1,548.
489 29 5/89 1 1/49 LU1-S4830-B-( ) 674. 1,090. 1,668.
549 29 5/89 1 1/49 LU1-S5430-B-( ) 725. 1,209. 1,819.
609 29 5/89 1 1/49 LU1-S6030-B-( ) 781. 1,293. 1,970.
669 29 5/89 1 1/49 LU1-S6630-B-( ) 835. 1,375. 2,149.
729 29 5/89 1 1/49 LU1-S7230-B-( ) 914. 1,486. 2,298.
789 29 5/89 1 1/49 LU1-S7830-B-( ) 971. 1,565. 2,418.
849 29 5/89 1 1/49 LU1-S8430-B-( ) 1,025. 1,649. 2,550.
909 29 5/89 1 1/49 LU1-S9030-B-( ) 1,078. 1,736. 2,665.
969 29 5/89 1 1/49 LU1-S9630-B-( ) 1,132. 1,826. 2,804.
Order Code
Example: LU1-S3030B-117
LU1 Worksurface, 1 1/49 thick
S Straight worksurface
30 Width
30 Depth
B No grommets
117 Surface finish
Specification Information
Grommets/no grommets:
A- worksurface includes oneedge grommet
B- worksurface does not includegrommets
Specify surface finish.
1 1/49 Options worksurfaces are3-ply, solid core construction withpilot holes at all pedestal, endpanel, and bracket locations.
Edge grommets are centered at rearof worksurface.
LU1- worksurfaces are supported bybrackets with wood screws.
Application Notes
309D worksurfaces are used inpanel system applications as mainsurfaces, extensions or credenzatops. They can be supported at eachend by 309 end support bracket, 309
cantilever bracket or 309W endpanel.
Options worksurfaces cannot beused in conjunction with Networkdesk supports.
All straight worksurfaces are 3/89 lessthan nominal depth for rear wireclearance.
Panel-supported 1 1/49 worksurfacesover 489 must be mid-spansupported by MB2-C24 bracket,specified separately.
Suspended pedestals may not beused with 1 1/49worksurfaces.
Dividends Horizon
267
Pos
tfor
med
Postformed Options worksurfaces 11/49Trapezoidal
description w d h pattern no. lam. V1 V2
Right hand - grommet 489 309/249 1 1/49 LU1-T48A-R-( ) $911. $1,301. $1,818.
549 309/249 1 1/49 LU1-T54A-R-( ) 1,159. 1,650. 2,309.
609 309/249 1 1/49 LU1-T60A-R-( ) 1,407. 2,002. 2,804.
729 309/249 1 1/49 LU1-T72A-R-( ) 1,658. 2,354. 3,290.
Left hand - grommet 489 309/249 1 1/49 LU1-T48A-L-( ) 911. 1,301. 1,818.
549 309/249 1 1/49 LU1-T54A-L-( ) 1,159. 1,650. 2,309.
609 309/249 1 1/49 LU1-T60A-L-( ) 1,407. 2,002. 2,804.
729 249/309 1 1/49 LU1-T72A-L-( ) 1,658. 2,354. 3,290.
Right hand - no grommet 489 309/249 1 1/49 LU1-T48B-R-( ) 865. 1,229. 1,714.
549 309/249 1 1/49 LU1-T54B-R-( ) 1,107. 1,579. 2,212.
609 309/249 1 1/49 LU1-T60B-R-( ) 1,353. 1,936. 2,697.
729 309/249 1 1/49 LU1-T72B-R-( ) 1,601. 2,277. 3,192.
Left hand - no grommet 489 309/249 1 1/49 LU1-T48B-L-( ) 865. 1,229. 1,714.
549 309/249 1 1/49 LU1-T54B-L-( ) 1,107. 1,579. 2,212.
609 309/249 1 1/49 LU1-T60B-L-( ) 1,353. 1,936. 2,697.
729 309/249 1 1/49 LU1-T72B-L-( ) 1,601. 2,277. 3,192.
Order Code
Example: LU1-T48B-R-117
LU1 Worksurface, 1 1/49 thick
T Trapezoidal
48 Width
B No grommets
R Right hand
117 Surface finish
Specification Information
Grommets/ no grommets
A- worksurface includes oneedge grommet
B- worksurface does not includegrommets
Specify surface finish.
Edge grommets are centered at rearof worksurface.Right-and-Left andare defined by applying trapezoidaltops as returns from rectilinearworksurfaces.R- Right hand309 D Left, 249 D Right edgeL- Left hand249 D Left, 309 D Right edge
Application Notes
1 1/49 Options worksurfaces are 3-ply solid core construction with pilotholes at all pedestal, end panel andbracket locations.
LU1- worksurfaces are supported bybrackets with wood screws.
Trapezoidal worksurfaces must besupported at each end by a pedestal,cantilever or cantilever bridgingbracket with a maximum span of 489
between supports. Panel-supportedworksurfaces over 489 must bemid-span supported by MB2-C18brackets, specified separately.
Options worksurfaces cannnot beused in conjunction with Networkdesk supports.
All worksurfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
Dividends Horizon
268
Postformed Options worksurfaces 11/49VDT corners and split-top surfaces
description type w d h pattern no. lam. V1 V2
Corner Corner grommet only 369 17 5/89 1 1/49 LU1-V3618-A( ) $1,025. $1,426. $2,219.
Corner grommet only 369 23 5/89 1 1/49 LU1-V3624-A( ) 1,049. 1,451. 2,242.
Corner grommet only 429 23 5/89 1 1/49 LU1-V4230-A( ) 1,103. 1,511. 2,364.
Corner grommet only 429 29 5/89 1 1/49 LU1-V4224-A( ) 1,159. 1,592. 2,477.
Corner grommet only 489 23 5/89 1 1/49 LU1-V4824-A( ) 1,300. 1,692. 2,770.
Corner grommet only 489 29 5/89 1 1/49 LU1-V4830-A( ) 1,348. 1,837. 2,914.
Order Code
Example: LU1-V4830-A-117
LU1 Worksurface, 1 1/49 thick
V VDT corner
48 Width
30 Depth of return
A Corner grommet
117 Specify finish
Specification Information
Grommet/no grommet:
A- VDT corner includes oneedge grommet in backcorner. Straight split tophas one center back edgegrommet.
Specify surface finish.
1 1/49 Options worksurfaces are solidcore construction with pilot holes atall bracket locations.
LU1- worksurfaces are supported bybrackets with wood screws.
Application Notes
VDT corners and split top straightsurfaces are used in panel systemapplications. Options VDT cornersmay be supported by left or righthand 249 cantilever brackets at therear corner, and cantilever bridgingbracket on each side edge (see page0).
Options straight split top should besupported by 189D cantileverbracket.
489W split-top corners must besupported by VDT- end supportbrackets kits in conjunction withcantilever brackets at side edges.
369W x 189D VDT corners accept189D returns, 369, 429, and 489W x249D VDT corners accept 249Dreturns, 429 and 489W x 309D VDTcorners accept 309D returns.
VDT corners are 3/89 less thannominal depth for rear wireclearance.
Split top corners havecounterbalanced adjustablekeyboard/mouse surface withfingertip control. Front surfaceadjusts from 59 below to 79 aboveback surface, and adjusts in tiltfrom -10° to +10°.
Corner worksurfaces with equal rearedges have diagonal grain direction.
Dividends Horizon
269
Pos
tfor
med
Postformed Options worksurfaces 11/49L-shape curvilinear
description type w d h pattern no. lam. V1 V2
249 D returns left and right 2 grommet 489 609 1 1/49 LU1-C4872SS( ) $1,821. $2,481. $3,654.
2 grommet 489 729 1 1/49 LU1-C4860SS( ) 1,584. 2,153. 3,178.
2 grommet 609 489 1 1/49 LU1-C7248SS( ) 1,821. 2,481. 3,654.
2 grommet 729 489 1 1/49 LU1-C6048SS( ) 1,584. 2,153. 3,178.
Corner grommet 429 429 1 1/49 LU1-C4242SS( ) 1,282. 1,748. 2,566.
Corner grommet 489 489 1 1/49 LU1-C4848SS( ) 1,397. 1,902. 2,797.
249 D returns left, 309 D right 2 grommets 489 609 1 1/49 LU1-C4860SD( ) 1,584. 2,153. 3,178.
2 grommets 489 729 1 1/49 LU1-C4872SD( ) 1,821. 2,481. 3,654.
2 grommets 609 489 1 1/49 LU1-C6048SD( ) 1,584. 2,153. 3,178.
2 grommets 729 489 1 1/49 LU1-C7248SD( ) 1,821. 2,481. 3,654.
Corner grommet 489 489 1 1/49 LU1-C4848SD( ) 1,397. 1,902. 2,797.
309 D returns left and right Corner grommet 489 489 1 1/49 LU1-C4848DD( ) 1,397. 1,902. 2,797.
309 D returns left, 249 D right 2 grommets 489 609 1 1/49 LU1-C4860DS( ) 1,584. 2,153. 3,178.
2 grommets 489 729 1 1/49 LU1-C4872DS( ) 1,821. 2,481. 3,654.
2 grommets 609 489 1 1/49 LU1-C6048DS( ) 1,584. 2,153. 3,178.
2 grommets 729 489 1 1/49 LU1-C7248DS( ) 1,821. 2,481. 3,654.
Corner grommet 489 489 1 1/49 LU1-C4848DS( ) 1,397. 1,902. 2,797.
Order Code
Example: LU1-C4860SD-117
LU1 Options worksurface,1 1/49
C L-shape curvilinear
48 Width left
60 Width right
S Depth of left return
D Depth of right return
117 Surface finish
Specification Information
Width dimension (W) refers to widthof left-side back edge; depthdimension (D) indicates width ofright-side back edge.
S- 249D side edgeD- 309D side edge
Specify surface finish.
1 1/49 curvilinear surfaces are solidcore construction with pilot holes atall bracket locations.LU1- worksurfaces are supported bybrackets with wood screws.
Corner worksurfaces with equal rearedges have diagonal grain direction.
L-shape worksurfaces have graindirection along the longer backedge.
Application Notes
Options L-shaped curvilinearworksurfaces may be supported byleft- or right-hand cantileverbrackets at the rear corner andcantilever bridging bracket on eachside edge. Use mid-span supportwhenever Options worksurfacesspan more than 489.
L-shape surfaces are veneer orpost-formed plastic laminate onboth back edges, matching profileT-mold on curvilinear front, andself-edge on sides.
Curvilinear worksurfaces areavailable only in 1 1/49 thickness.
L-shape surfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
Dividends Horizon
270
Postformed Options worksurfaces 11/49Rounded end and conference shapes
description type w d h pattern no. lam. V1 V2
Half round With vertical panel 309 50 3/89 1 1/49 LU1-R3050-B-( ) $1,101. $1,681. $2,512.
309D rounded end No grommets 62 5/89 309 1 1/49 LU1-R6330B( )(L/R) 1,498. 2,281. 3,631.
No grommets 74 5/89 309 1 1/49 LU1-R7530B( )(L/R) 1,552. 2,365. 3,689.
Order Code
Example: LU1-R6330B-117-L
LU1 Options worksurface,1 1/49 thick
R Rounded end
63 Width
30 Depth
B No grommets
117 Surface finish
L Left hand
Specification Information
Grommets/no grommets:
B- worksurface does not includegrommets.
Specify surface finish.
1 1/49 worksurfaces are 3-ply, solidcore construction.Plastic laminateworksurfaces have radiused T moldedge.Rounded end worksurfaces have aflat self-edge in the straight end.
LU1- worksurfaces are supported bybrackets with wood screws.
Rounded end worksurfaces arespecified left or right to determineposition of pedestal drilling.Rounded end when seated at deskdefines L/R hand (Right handshown above). All worksurfaces areU.L.-listed.
Application Notes
Rounded end worksurfaces may besupported by 309 end supportbrackets, 309 flat bracket or 309
conference end panel, and by asupport column at the rounded end.
Suspended pedestals may not beused with 1 1/49 worksurfaces.Conference worksurfaces must besupported by support column andflat bracket or bridging bracket toadjacent desk.
Half round with vertical panelattaches to 249D straight or VDTcorner worksurfaces supported byvertical panel.
Dividends Horizon
271
Pos
tfor
med
Postformed Options worksurfaces 11/49Wave-end surfaces
description w d h pattern no. lam.
Left wave-end - Grommet 369 29 5/89 1 1/49 LU1-W36AL( ) $1,318.
429 29 5/89 1 1/49 LU1-W42AL( ) 1,397.
489 29 5/89 1 1/49 LU1-W48AL( ) 1,480.
Left wave-end - No grommets 369 29 5/89 1 1/49 LU1-W36BL( ) 1,293.
429 29 5/89 1 1/49 LU1-W42BL( ) 1,370.
489 29 5/89 1 1/49 LU1-W48BL( ) 1,456.
Right wave-end - Grommet 369 29 5/89 1 1/49 LU1-W36AR( ) 1,318.
429 29 5/89 1 1/49 LU1-W42AR( ) 1,397.
489 29 5/89 1 1/49 LU1-W48AR( ) 1,480.
Right wave-end - No grommets 369 29 5/89 1 1/49 LU1-W36BR( ) 1,293.
429 29 5/89 1 1/49 LU1-W42BR( ) 1,370.
489 29 5/89 1 1/49 LU1-W48BR( ) 1,456.
Order Code
Example: LU1-W48AL-117
LU1 Options worksurface,1 1/49
W Wave-end curvilinear
48 Width
A With grommets
L Left
117 Surface finish
Specification Information
1 1/49 curvilinear surfaces are solidcore construction with pilot holes atbracket and pedestal locations.
LU1- worksurfaces are supported bybrackets with wood screws.
Grommets/no grommets:
A- Worksurface includes oneedge grommet
B- Worksurface does notinclude grommets
Specify surface finish.
Edge grommets are centered at rearof worksurface.
Application Notes
Options wave-end curvilinearworksurfaces are for panel planningonly and cannot be used inconjunction with Network desksupports.
Use cantilever bridging bracket tojoin to adjacent 1 1/49 worksurface.
Wave-end surfaces are post-formedon back edge, matching profileT-mold on curvilinear front, andself-edge on sides.
Wave-end surfaces are availableonly in plastic laminate, 1 1/49thickness.
Wave-end surfaces are nominal309D at left or right, and align with249D surface at the other end.
Dividends Horizon
272
Postformed Options worksurfaces 11/49120° corners90° return
description w return h pattern no. lam. V1 V2
90° return 369 249 1 1/49 LU1-Y36S-B( )( ) $1,186. $1,672. $2,028.
429 249 1 1/49 LU1-Y42S-B( )( ) 1,253. 2,028. 2,674.
489 249 1 1/49 LU1-Y48S-B( )( ) 1,389. 2,225. 3,351.
609 249 1 1/49 LU1-Y60S-B( )( ) 1,695. n/a n/a
Diamond 369 249 1 1/49 LU1-D36S-B( )( ) 1,170. 1,691. 2,087.
429 249 1 1/49 LU1-D42S-B( )( ) 1,302. 2,067. 2,786.
489 249 1 1/49 LU1-D48S-B( )( ) 1,426. 2,313. 3,509.
Transitional 249 249 1 1/49 LU1-YTS-( )( ) 911. 1,197. 1,553.
Order Code
Example: LU1-Y48S-B-L-L-117
LU1 Options worksurface,1 1/49 thick
Y 120° corner,90° returns
48 Width
S 249D return
B No Grommets
L Left hand
L Laminate
117 Surface finish
Specification Information
Width dimensions (w) refers towidth of both back edges.
Specify surface finish.
1 1/49 Options worksurfaces are solidcore construction with pilot holes atstandard support locations.
120° Options worksurfaces areavailable without grommets only.
LU1- worksurfaces are supported bybrackets with wood screws.
Application Notes
Worksurfaces are 3/89 less thannominal depth for rear wireclearance.
120° Postformed Optionsworksurfaces with 90° returns areused in panel system applicationsonly. They can be supported at eachend by 249 end support brackets,249 cantilever bracket or 189D and249D pedestals. 120° corner issupported by a standard ( 90° )249D cantilever bracket.
Use cantilever bridging brackets tojoin to adjacent worksurfaces or totransitional 120° worksurfaces. Usemid-span support whenever Optionsworksurfaces span more then 489.
Transitional worksurfaces connecttwo 120° corner tops with 90°returns.
120° Postformed Optionsworksurfaces with 120° returns areused in panel system applicationsonly. They can be supported at eachreturn end by 249 end supportbrackets, 249 cantilever bracket or189D and 249D pedestals. 120°corner is supported by standard (90° ) 249D cantilever bracket.
Order brackets with wood screws forPostformed Options worksurfaces.
Corner worksurfaces have diagonalgrain direction.
Dividends Horizon
273
Pos
tfor
med
Postformed Options worksurfaces 11/49120° cornersMeeting Corners
description w return h pattern no. lam. V1 V2
Meeting cornerRigh hand - no grommets
489 249 1 1/49 LU1-M48S-BRL( ) $1,431. n/a n/a
Meeting cornerLeft hand - no grommets
489 249 1 1/49 LU1-M48S-BLL( ) 1,431. n/a n/a
Order Code
Example: LU1-M48S-B-L-L-117
LU1 Options worksurface,1 1/49 thick
M Meeting corner
48 Width
S 249D return
B No Grommets
L Left hand
L Laminate
117 Surface finish
Specification Information
Width dimension (w) refers to widthof smaller back edge. Total width ofback edge with rounded meetingarea is 62 1/29.
Specify surface finish.
1 1/49 worksurfaces are solid coreconstruction with pilot holes at allsupport locations.
120° Options worksurfaces areavailable without grommets only.
LU1- worksurfaces are supported bybrackets with wood screws.
Application Notes
Worksurfaces are 3/89 less thannominal depth for rear wireclearance or privacy screens.
Postformed Options 120° meetingworksurfaces are used in panelsystem application only. They aresupported at the rounded meetingend by a Postformed supportcolumn, specified separately. Theycan be supported at the other end by249 end support brackets, 249
cantilever bracket or 189D and 249Dpedestals.
120° corner is supported by 249Dcantilever bracket.
Use 249D cantilever bridgingbrackets to join to adjacentworksurfaces.
Dividends Horizon
274
Panel Mounted Worksurface BracketsCantilevers, Flat Brackets and Panel-to-Worksurface Brackets
description type w d h pattern no. black P1 P2 P3
Cantilever Bracket Left or Right (Left Shown)(package of 10)
For 189D WS 1 5/169 12 3/169 11 13/169 DB1C 18 (L or R) 10 $560. $589. $612. $641.
For 249D WS 1 5/169 20 5/89 10 1/29 DB1C 24 (L or R) 10 695. 730. 765. 801.
For 309D WS 1 5/169 26 15/169 10 1/29 DB1C 30 (L or R) 10 993. 1,043. 1,091. 1,143.
Cantilever Brackets, Left or Right (Left Shown)(single pack)
For 309D WS 1 5/169 26 15/169 10 1/29 DB1C30 (L or R) 122. 129. 135. 144.
For 189D WS 1 5/169 12 3/169 11 13/169 DB1C18 (L or R) 68. 70. 75. 76.
For 249D WS 1 5/169 20 5/89 10 1/29 DB1C24 (L or R) 87. 94. 101. 103.
Cantilever Brackets for 120° Planning(Left Shown)(single pack)
20 5/899 1 5/169 DB120C (L or R) 87. 94. 101. 103.
Flat Bracket (single pack) For 189D WS 3 3/49 8 5/169 DB1F18SP 35. n/a n/a n/a
For 249D WS 3 3/49 14 5/89 DB1F24SP 40. n/a n/a n/a
For 309D WS 3 3/49 20 15/169 DB1F30SP 45. n/a n/a n/a
Flat Bracket (package of 10) For 189D WS 3 3/49 8 5/169 DB1F18TP 189. n/a n/a n/a
For 249D WS 3 3/49 14 5/169 DB1F24TP 315. n/a n/a n/a
For 309D WS 3 3/49 20 5/169 DB1F30TP 361. n/a n/a n/a
Worksurface Reinforcement For 729D WS 669 49 DB1WR72 101. n/a n/a n/a
For 549D WS 489 49 DB1WR54 91. n/a n/a n/a
For 609D WS 549 49 DB1WR60 92. n/a n/a n/a
For 669D WS 609 49 DB1WR66 97. n/a n/a n/a
Panel-to-Worksurface Brackets Left (Shown) 39 39 4 11/169 DB1PWSL 10. 10. 12. 13.
Right 39 39 4 11/169 DB1PWSR 10. 10. 12. 13.
Pair 39 39 4 11/169 DB1PWSP 24. 24. 29. 35.
Ordering Information
Panel-to-Worksurface Bracket,Off Module
1. Pattern Number2. Trim Finish
Order Code
Panel-to-Worksurface Bracket,Off ModuleExample: DB1P WS36, 113
DB1PWS36
Pattern Number
113 Dark Grey Finish
Included with:
Panel-to-Worksurface Bracket,Off Module
• Trim finish mounting rail• Worksurface brackets
Options
Panel-to-Worksurface Bracket,Off Module
Dividends Horizon
275
Wor
ksur
face
Sup
port
san
dS
cree
ns
Panel Mounted Worksurface BracketsCantilevers, Flat Brackets and Panel-to-Worksurface Brackets
description type w d h pattern no. black P1 P2 P3
Panel-to-Worksurface Brackets(package of 10)
Left (Shown) 39 39 4 11/169 DB1PWSL10 $105. $105. $118. $132.
Right 39 39 4 11/169 DB1PWSR10 105. 105. 118. 132.
Panel-to-Worksurface Brackets for use withWorksurface Height Panels ONLY
Left 39 39 4 11/169 DB1PWSLWH 35. 37. 40. 42.
Right 39 39 4 11/169 DB1PWSRWH 35. 37. 40. 42.
Pair 39 39 4 11/169 DB1PWSPWH 65. 69. 76. 84.
Panel-to-Worksurface Brackets(Off Module)
For 249 Wide Panel DB1PWS24 n/a 97. 105. 107.
For 309 Wide Panel DB1PWS30 n/a 102. 109. 114.
For 369 Wide Panel DB1PWS36 n/a 106. 114. 120.
For 429 Wide Panel DB1PWS42 n/a 112. 125. 134.
For 489 Wide Panel DB1PWS48 n/a 120. 134. 141.
Layered Cantilever Assembly Left or Right
Right hand shown
DBVDC (L or R) 123. 130. 139. 145.
Ordering Information
Panel-to-Worksurface Bracket,Off Module
1. Pattern Number2. Trim Finish
Order Code
Panel-to-Worksurface Bracket,Off ModuleExample: DB1P WS36, 113
DB1PWS36
Pattern Number
113 Dark Grey Finish
Included with:
Panel-to-Worksurface Bracket,Off Module
• Trim finish mounting rail• Worksurface brackets
Options
Panel-to-Worksurface Bracket,Off Module
Dividends Horizon
276
Panel Mounted Worksurface BracketsCurrents worksurfaces for Dividends Horizon Stiffeners
description type w d h pattern no. list
Stiffener for straight and corner worksurfaces 369 209 1/29 29 AWM1 S36 $91.
429 269 1/29 29 AWM1 S42 98.
489 329 1/29 29 AWM1 S48 100.
609 449 1/29 29 AWM1 S60 102.
669 509 1/29 29 AWM1 S66 107.
729 569 1/29 29 AWM1 S72 112.
789 629 1/29 29 AWM1 S78 118.
849 689 1/29 29 AWM1 S84 120.
Ordering Information
1. Pattern Number
Order Code
Stiffener
Example: AWM1 S48
AW1 Worksurface
S Stiffener
48 Type
Application Notes
Currents woksurfaces for DividendsHorizon require stiffener when thespan between structural supportsexceeds 369. Specify worksurfacestiffeners and supports separately.
When using Dividends Horizon endsupport brackets, order MB3-EC18,24 or 30.
For 909 application span, use twoAWM1-S42 stiffeners.
For 969 application span, use twoAWM1-S48 stiffeners.
Specification Information
Stiffener mounts 189 from front edgeof worksurface and will interferewith mobile or floorstandingpedestals greater than 189 deep.
To accommodate a floorstandingpedestal greater than 189 deep atone end of worksurface, specifystiffener for 129 narrowerworksurface.
To accommodate two floorstandingpedestals or double-wide at one endof worksurface, specify stiffener for249 narrower worksurface.
Dividends Horizon
277
Wor
ksur
face
Sup
port
san
dS
cree
ns
Panel Mounted Worksurface BracketsFlat Brackets
description type w d h pattern no. list
Flat brackets with machine screws 189 surface 3 1/29 89 MB3-F18M $62.
249 surface 3 1/29 149 MB3-F24M 66.
309/369 surface 3 1/29 209 MB3-F30M 76.
Flat brackets with wood screws 189 surface 3 1/29 89 MB3-F18W 62.
249 surface 3 1/29 149 MB3-F24W 66.
309/369 surface 3 1/29 209 MB3-F30W 76.
Ordering Information
Flat Brackets1. Pattern Number
Order Code
Flat Brackets
Example: MB3-F24M
MB3 Bracket
F Bracket type
24 Bracket depth
M Machine screws
Application Notes
Flat bridging brackets attach twoworksurfaces at the same height in90° ‘‘L’’, VDT or end-to-endapplications (in conjunction withfloorstanding pedestal support)
Flat bridging brackets are universalfor freestanding or panel basedplanning.
Brackets with machine screws(suffix-M) are used with MW2- andMU1- worksurfaces.
Brackets with wood screws(suffix-W) are used with LU1- andAWM2- worksurfaces.
Dividends Horizon
278
Network Privacy screensback screens
description type w d h pattern no. 10 15 20 30 40 45 50 55
Back of worksurfacescreens to 429H
309 3/49 159 MZ1-B3015-( ) $403. $452. $466. $509. $571. $636. $658. $699.
369 3/49 159 MZ1-B3615-( ) 484. 528. 541. 593. 651. 702. 739. 776.
429 3/49 159 MZ1-B4215-( ) 593. 620. 638. 704. 767. 821. 845. 905.
489 3/49 159 MZ1-B4815-( ) 667. 693. 715. 782. 878. 935. 967. 1,030.
549 3/49 159 MZ1-B5415-( ) 778. 800. 824. 910. 992. 1,052. 1,080. 1,156.
609 3/49 159 MZ1-B6015-( ) 858. 871. 904. 990. 1,103. 1,173. 1,209. 1,286.
669 3/49 159 MZ1-B6615-( ) 934. 941. 0. 0. 0. 0. 0. 0.
729 3/49 159 MZ1-B7215-( ) 1,003. 1,045. 0. 0. 0. 0. 0. 0.
789 3/49 159 MZ1-B7815-( ) 1,104. 1,144. 0. 0. 0. 0. 0. 0.
Back of worksurfacescreens to overheadsupport height, 469H
309 3/49 199 MZ1-B3019-( ) 510. 558. 571. 628. 689. 750. 772. 824.
369 3/49 199 MZ1-B3619-( ) 631. 666. 681. 754. 801. 850. 881. 943.
429 3/49 199 MZ1-B4219-( ) 747. 765. 781. 866. 956. 1,011. 1,045. 1,104.
489 3/49 199 MZ1-B4819-( ) 848. 869. 890. 980. 1,133. 1,155. 1,196. 1,267.
549 3/49 199 MZ1-B5419-( ) 968. 972. 1,008. 1,104. 1,186. 1,263. 1,300. 1,386.
609 3/49 199 MZ1-B6019-( ) 1,045. 1,073. 1,103. 1,222. 1,296. 1,384. 1,427. 1,518.
669 3/49 199 MZ1-B6619-( ) 1,147. 1,174. 0. 0. 0. 0. 0. 0.
729 3/49 199 MZ1-B7219-( ) 1,263. 1,284. 0. 0. 0. 0. 0. 0.
789 3/49 199 MZ1-B7819-( ) 1,375. 1,393. 0. 0. 0. 0. 0. 0.
Oreder Code
Example: MZ1-B6619-15
MZ1 Network privacy screenB Back of worksurface66 Width19 Height15 Surface type and group no.W210 Upholstery
Specification Information
Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
Network screens may be used withPlannable Upstart tables. Refer tofront of Upstart price book forplanning information.
* Screens 669w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.
Application Notes
Back of worksurface screensprovide visual barrier and tackablesurface from underside ofworksurface to a height of 429, 469
or 499.
Screen widths should correspond tostraight worksurface width, or sumof VDT corner and return widths.
Use back of worksurface screen forVDT applications where one side isbacked by a vertical panel.
VDT worksurfaces will accept backscreens on only one back edge.
Back screens may not be used at theend of a straight worksurface; useend screens in this application.
Privacy screens are not available ina combination of fabrics.
Back of worksurface screens are fulldimension: two smaller screens maybe substituted for a larger one. Forexample, if using fabric grades20-70, specify two 369 screens for a729 surface.
Between back-to-back straight orVDT worksurfaces specify asingle 3/49 back screen. This allowsback-to-back 23 5/89D or 29 5/89Dworksurfaces to plan on a precise 69
module.
159 high screens are used for a 429
horizon.
199H screens are used to fill inspace between worksurface andoverhead.
229H screens fill the space betweenworksurface and Reuter overhead.
All but shared end screens start atthe bottom of the worksurface.
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit, andstiffener clip.
For replacement screen stiffenerssee Accessories page.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
Dividends Horizon
279
Wor
ksur
face
Sup
port
san
dS
cree
ns
Network Privacy screensback screens
description type w d h pattern no. 10 15 20 30 40 45 50 55
Back of worksurfacescreens, to Reuteroverhead supportheight, 499H
309 3/49 229 MZ1-B3022-( ) $628. $659. $674. $750. $801. $858. $884. $944.
369 3/49 229 MZ1-B3622-( ) 776. 800. 824. 906. 971. 1,008. 1,038. 1,103.
429 3/49 229 MZ1-B4222-( ) 890. 906. 935. 1,030. 1,144. 1,198. 1,235. 1,318.
489 3/49 229 MZ1-B4822-( ) 1,045. 1,046. 1,077. 1,190. 1,269. 1,385. 1,429. 1,519.
549 3/49 229 MZ1-B5422-( ) 1,145. 1,147. 1,190. 1,318. 1,400. 1,477. 1,525. 1,634.
609 3/49 229 MZ1-B6022-( ) 1,222. 1,279. 1,318. 1,451. 1,538. 1,592. 1,643. 1,752.
669 3/49 229 MZ1-B6622-( ) 1,364. 1,420. 0. 0. 0. 0. 0. 0.
729 3/49 229 MZ1-B7222-( ) 1,519. 1,522. 0. 0. 0. 0. 0. 0.
789 3/49 229 MZ1-B7822-( ) 1,637. 1,640. 0. 0. 0. 0. 0. 0.
Oreder Code
Example: MZ1-B6619-15
MZ1 Network privacy screenB Back of worksurface66 Width19 Height15 Surface type and group no.W210 Upholstery
Specification Information
Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
Network screens may be used withPlannable Upstart tables. Refer tofront of Upstart price book forplanning information.
* Screens 669w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.
Application Notes
Back of worksurface screensprovide visual barrier and tackablesurface from underside ofworksurface to a height of 429, 469
or 499.
Screen widths should correspond tostraight worksurface width, or sumof VDT corner and return widths.
Use back of worksurface screen forVDT applications where one side isbacked by a vertical panel.
VDT worksurfaces will accept backscreens on only one back edge.
Back screens may not be used at theend of a straight worksurface; useend screens in this application.
Privacy screens are not available ina combination of fabrics.
Back of worksurface screens are fulldimension: two smaller screens maybe substituted for a larger one. Forexample, if using fabric grades20-70, specify two 369 screens for a729 surface.
Between back-to-back straight orVDT worksurfaces specify asingle 3/49 back screen. This allowsback-to-back 23 5/89D or 29 5/89Dworksurfaces to plan on a precise 69
module.
159 high screens are used for a 429
horizon.
199H screens are used to fill inspace between worksurface andoverhead.
229H screens fill the space betweenworksurface and Reuter overhead.
All but shared end screens start atthe bottom of the worksurface.
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit, andstiffener clip.
For replacement screen stiffenerssee Accessories page.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
Dividends Horizon
280
Network Privacy screensVDT Screens
description type w d h pattern no. 10 15 20 30 40 45 50 55
Back of VDT screens To 429H 35 5/89 3/49 159 MZ1-V3615-( ) $484. $528. $541. $571. $636. $702. $739. $776.
To 429H 41 5/89 3/49 159 MZ1-V4215-( ) 593. 620. 638. 689. 750. 821. 845. 905.
To 429H 47 5/89 3/49 159 MZ1-V4815-( ) 667. 693. 715. 767. 850. 935. 967. 1,030.
To 429H 59 5/89 3/49 159 MZ1-V6015-( ) 845. 878. 906. 969. 1,071. 1,159. 0. 0.
To 429H 71 5/89 3/49 159 MZ1-V7215-( ) 1,020. 1,054. 0. 0. 0. 0. 0. 0.
To 469H 35 5/89 3/49 199 MZ1-V3619-( ) 637. 661. 681. 725. 779. 850. 881. 943.
To 469H 41 5/89 3/49 199 MZ1-V4219-( ) 747. 765. 781. 836. 935. 1,011. 1,045. 1,104.
To 469H 47 5/89 3/49 199 MZ1-V4819-( ) 848. 871. 904. 961. 1,046. 1,155. 1,196. 1,267.
To 469H 59 5/89 3/49 199 MZ1-V6019-( ) 1,068. 1,101. 1,143. 1,236. 1,370. 1,482. 0. 0.
To 469H 71 5/89 3/49 199 MZ1-V7219-( ) 1,279. 1,330. 0. 0. 0. 0. 0. 0.
To 499H 35 5/89 3/49 229 MZ1-V3622-( ) 776. 800. 824. 880. 935. 1,008. 1,038. 1,103.
To 499H 41 5/89 3/49 229 MZ1-V4222-( ) 890. 906. 935. 980. 1,119. 1,198. 1,235. 1,318.
To 499H 47 5/89 3/49 229 MZ1-V4822-( ) 1,045. 1,048. 1,079. 1,147. 1,155. 1,385. 1,429. 1,519.
To 499H 59 5/89 3/49 229 MZ1-V6022-( ) 1,235. 1,283. 1,323. 1,440. 1,586. 1,722. 0. 0.
To 499H 71 5/89 3/49 229 MZ1-V7222-( ) 1,477. 1,538. 0. 0. 0. 0. 0. 0.
Oreder Code
Example: MZ1-V4822-15
MZ1 Network privacy screenV VDT48 Width22 Height15 Surface type and group no.W210 Upholstery
Specification Information
Surface type:
10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
VDT worksurfaces will not acceptback screens on both back edges.Use VDT screens on at least oneback edge.
VDT screens are not in pairs;specify one for each back edge orone VDT screen and one backscreen.
* Screens 669w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.
Application Notes
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit andstiffener clip.
159 high screens are used for a 429
horizon.
199H screens are used to fill inspace between worksurface anddesk mounted Network overheads.
229H screens fill the space betweenworksurface and desk mountedReuter overheads.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
Dividends Horizon
281
Wor
ksur
face
Sup
port
san
dS
cree
ns
Network Privacy screensend screens
description type w d h pattern no. 10 15 20 30 40 45 50 55
End screens foroutside application
To 429H 249 3/49 159 MZ1-E2415-W/U-( ) $383. $438. $449. $471. $545. $620. $638. $689.
To 429H 309 3/49 159 MZ1-E3015-W/U-( ) 428. 468. 484. 521. 583. 661. 688. 727.
To 469H 249 3/49 199 MZ1-E2419-W/U-( ) 465. 506. 510. 562. 620. 694. 716. 767.
To 469H 309 3/49 199 MZ1-E3019-W/U-( ) 535. 582. 593. 636. 694. 776. 801. 850.
To 499H 249 3/49 229 MZ1-E2422-W/U-( ) 545. 576. 590. 631. 699. 773. 800. 848.
To 499H 309 3/49 229 MZ1-E3022-W/U-( ) 651. 689. 700. 754. 815. 889. 914. 975.
End screens forshared application
To 429H 249 3/49 139 MZ1-S2415-W/U-( ) 369. 421. 436. 454. 528. 594. 615. 659.
To 429H 309 3/49 139 MZ1-S3015-W/U-( ) 403. 452. 466. 502. 561. 636. 658. 699.
To 469H 249 3/49 179 MZ1-S2419-W/U-( ) 443. 484. 502. 534. 594. 671. 693. 744.
To 469H 309 3/49 179 MZ1-S3019-W/U-( ) 510. 558. 571. 611. 671. 750. 772. 824.
To 499H 249 3/49 209 MZ1-S2422-W/U-( ) 521. 556. 564. 608. 672. 747. 767. 818.
To 499H 309 3/49 209 MZ1-S3022-W/U-( ) 628. 659. 674. 725. 779. 858. 884. 944.
Oreder Code
Example: MZ1-S3019W15
MZ1 Network privacy screenS Shared30 Width19 HeightW For 1 3/49 worksurface15 Surface type and group no.W210 Upholstery
Specification Information
Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
End screens specify:
W- For use with 1 3/49 thickworksurfaces
U- For use with 1 1/49 thickworksurfaces
* Network screens may be usedwith Plannable Upstart tables. Referto front of Upstart price book forplanning information.
End screens must be used at theend of straight or rounded endworksurfaces.
End screens for outside applicationcover the end of the worksurfaceand align with adjacent backscreens.End screens for sharedapplication begin above theworksurface to allow modularplanning when straightworksurfaces are end-to-end.
When specifying end screens under649H panel mounted Networkoverheads with task lights, onlyscreens to 429H will fit.
With 649H panel-mounted Reuteroverheads any screen up to 499Hmay be planned perpendicular tostorage.
Application Notes
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit andstiffener clip.
159 high screens are used for a 429
horizon.
199H screens are used to fill inspace between worksurface anddesk mounted Network overheads.
229H screens fill the space betweenworksurface and desk mountedReuter overheads.
All but shared end screens start atthe bottom of the worksurface.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
Dividends Horizon
282
Screen-to-Worksurface BracketsScreen mid-span worksurface support
description type w d h pattern no. P1 P2 P3
Screen-to-Worksurface Brackets(Individual)
Left hand shown
Left DB1SWSL $8. $10. $14.
Right DB1SWSR 8. 10. 14.
Screen-to-Worksurface Brackets(Pair)
Left/Right DB1SWSP 42. 45. 48.
Screen Mid-SpanWorksurface Support
Left hand shown
left hand DBSMLH 37. 39. 40.
right hand DBSMRH 37. 39. 40.
Ordering Information
Panel-to-Worksurface Bracket,Off Module
1. Pattern Number2. Trim Finish
Order Code
Panel-to-Worksurface Bracket,Off ModuleExample: DB1P WS36, 113
DB1PWS36
Pattern Number
113 Dark Grey Finish
Included with:
Panel-to-Worksurface Bracket,Off Module
• Trim finish mounting rail• Worksurface brackets
Options
Panel-to-Worksurface Bracket,Off Module
Dividends Horizon
283
Wor
ksur
face
Sup
port
san
dS
cree
ns
Universal Modesty Panel, steel109 High
description w d h pattern no. P1 P2 P3
109h Universal modesty panelUnder worksurface mount
249 19 109 D1PS1024S $347. $392. $407.
309 19 109 D1PS1030S 359. 405. 417.
369 19 109 D1PS1036S 361. 407. 424.
429 19 109 D1PS1042S 365. 414. 428.
489 19 109 D1PS1048S 380. 427. 443.
549 19 109 D1PS1054S 405. 454. 473.
609 19 109 D1PS1060S 438. 493. 518.
Order Code
Universal Modesty Panel
Example: D1PS1024S
D1PS1024SPattern Number
Specification Information
Pricing listed is for textured paint.
Add $35 to the list prices above forsmooth paint finish option.
Application Notes
Modesty panel attaches to undersideof any standard worksurface.
Modesty panels are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
284
Universal Modesty Panel, fabric109 High
description w d h pattern no. 10 20 30 40
109h Universal modesty panelUnder worksurface mount
249 19 109 D1PS1024F $598. $640. $673. $692.
309 19 109 D1PS1030F 612. 660. 684. 705.
369 19 109 D1PS1036F 630. 679. 704. 732.
429 19 109 D1PS1042F 642. 692. 725. 747.
489 19 109 D1PS1048F 667. 712. 744. 769.
549 19 109 D1PS1054F 669. 715. 746. 772.
609 19 109 D1PS1060F 734. 787. 823. 847.
Order Code
Universal Modesty Panel
Example: D1PS1024F
D1PS1024FPattern Number
Specification Information Application Notes
Modesty panel attaches to undersideof any standard worksurface.
Modesty panels are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
285
Wor
ksur
face
Sup
port
san
dS
cree
ns
Univeral Privacy Screen, fabric and fabric w/79 slatwall429h horizon with 109 modesty
description w d h pattern no. 10 20 30 40
Universal privacy sceen, fabric429h horizon with 109 modesty
249 19 24 1/29 D1PS4224F $699. $751. $787. $811.
309 19 24 1/29 D1PS4230F 724. 779. 811. 840.
369 19 24 1/29 D1PS4236F 766. 825. 861. 891.
429 19 24 1/29 D1PS4242F 776. 837. 872. 903.
489 19 24 1/29 D1PS4248F 795. 856. 898. 925.
549 19 24 1/29 D1PS4254F 818. 877. 914. 947.
609 19 24 1/29 D1PS4260F 838. 903. 944. 975.
Universal privacy sceen, fabric w/79 slatwall429h horizon with 109 modesty
249 19 24 1/29 D1PS4224W1 847. 910. 953. 987.
309 19 24 1/29 D1PS4230W1 931. 1,001. 1,047. 1,082.
369 19 24 1/29 D1PS4236W1 989. 1,065. 1,114. 1,152.
429 19 24 1/29 D1PS4242W1 1,062. 1,146. 1,197. 1,239.
489 19 24 1/29 D1PS4248W1 1,100. 1,188. 1,224. 1,282.
549 19 24 1/29 D1PS4254W1 1,225. 1,320. 1,383. 1,430.
609 19 24 1/29 D1PS4260W1 1,272. 1,368. 1,431. 1,480.
Order Code
Universal Privacy Screen
Example: D1PS4224F
D Dividends
1 Generation 1
PS Privacy Screen
42 Height
24 Width
F Fabric
Specification Information Application Notes
Modesty panel attaches to undersideof any standard worksurface.
Modesty panels are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
286
Univeral Privacy Screen, steel429h horizon with 109 modesty
description w d h pattern no. P1 P2 P3
Universal privacy screen, steel429h horizon with 109 modesty
249 19 24 1/29 D1PS4224S $750. $860. $899.
309 19 24 1/29 D1PS4230S 767. 877. 913.
369 19 24 1/29 D1PS4236S 794. 908. 947.
429 19 24 1/29 D1PS4242S 804. 921. 959.
489 19 24 1/29 D1PS4248S 859. 983. 1,025.
549 19 24 1/29 D1PS4254S 901. 1,029. 1,074.
609 19 24 1/29 D1PS4260S 979. 1,119. 1,165.
Ordering Code
Universal Privacy ScreenExample: D1PS4224SD Dividends1 Generation 1PS Privacy Screen42 Height24 WidthS Steel
Specification Information
Pricing listed is for textured paint.
Add $35 to the list prices above forsmooth paint finish option.
Steel insert color matches screenback color.
Application Notes
Privacy screen attaches tounderside of any standardworksurface.
Privacy screens are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
429 horizon screen providesapproximately 13 1/49 of privacyabove worksurface height and 109 ofmodesty coverage belowworksurface height.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
287
Wor
ksur
face
Sup
port
san
dS
cree
ns
Univeral Privacy Screen, steel429h horizon with 179 modesty
description w d h pattern no. P1 P2 P3
Universal privacy screen, steel429h horizon with 179 modesty
249 19 31 7/89 D1PS42T24S $776. $890. $927.
309 19 31 7/89 D1PS42T30S 799. 913. 954.
369 19 31 7/89 D1PS42T36S 840. 963. 1,001.
429 19 31 7/89 D1PS42T42S 864. 989. 1,033.
489 19 31 7/89 D1PS42T48S 898. 1,025. 1,065.
549 19 31 7/89 D1PS42T54S 935. 1,074. 1,117.
609 19 31 7/89 D1PS42T60S 1,019. 1,166. 1,219.
Ordering Code
Universal Privacy ScreenExample: D1PS42T24SD Dividends1 Generation 1PS Privacy Screen42 Height24 WidthS Steel
Specification Information
Pricing listed is for textured paint.
Add $35 to the list prices above forsmooth paint finish option.
Steel insert color matches screenback color.
Application Notes
Privacy screen attaches tounderside of any standardworksurface.
Privacy screens are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
429 horizon screen providesapproximately 13 1/49 of privacyabove worksurface height and 179 ofmodesty coverage belowworksurface height.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
288
Univeral Privacy Screen, steel509h horizon with 109 modesty
description w d h pattern no. P1 P2 P3
Universal privacy screen, steel509h horizon with 109 modesty
249 19 31 7/89 D1PS5024S $776. $890. $927.
309 19 31 7/89 D1PS5030S 799. 913. 954.
369 19 31 7/89 D1PS5036S 840. 963. 1,001.
429 19 31 7/89 D1PS5042S 864. 989. 1,033.
489 19 31 7/89 D1PS5048S 898. 1,025. 1,065.
549 19 31 7/89 D1PS5054S 935. 1,074. 1,117.
609 19 31 7/89 D1PS5060S 1,019. 1,166. 1,219.
Ordering Code
Universal Privacy ScreenExample: D1PS5024SD Dividends1 Generation 1PS Privacy Screen50 Height24 WidthS Steel
Specification Information
Pricing listed is for textured paint.
Add $35 to the list prices above forsmooth paint finish option.
Steel insert color matches screenback color.
Application Notes
Privacy screen attaches tounderside of any standardworksurface.
Privacy screens are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
429 horizon screen providesapproximately 13 1/49 of privacyabove worksurface height and 109 ofmodesty coverage belowworksurface height.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
289
Wor
ksur
face
Sup
port
san
dS
cree
ns
Univeral Privacy Screen, fabric429h horizon with 179 modesty
description w d h pattern no. 10 20 30 40
Universal privacy sceen, fabric429h horizon with 179 modesty
249 19 31 7/89 D1PS42T24F $735. $790. $825. $851.
309 19 31 7/89 D1PS42T30F 754. 811. 849. 877.
369 19 31 7/89 D1PS42T36F 818. 877. 914. 947.
429 19 31 7/89 D1PS42T42F 831. 899. 935. 967.
489 19 31 7/89 D1PS42T48F 854. 922. 963. 997.
549 19 31 7/89 D1PS42T54F 879. 947. 989. 1,021.
609 19 31 7/89 D1PS42T60F 905. 975. 1,019. 1,054.
Order Code
Universal Privacy Screen
Example: D1PS42T24F
D Dividends
1 Generation 1
PS Privacy Screen
42 Height
24 Width
Fabric Fabric
Specification Information
Pricing listed is for textured paint.
Add $35 to the list prices above forsmooth paint finish option.
Slatwall color matches screen backcolor.
Application Notes
Privacy screen attaches tounderside of any standardworksurface.
Privacy screens are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
429 horizon screen providesapproximately 13 1/49 of privacyabove worksurface height and 109 ofmodesty coverage belowworksurface height.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
290
Univeral Privacy Screen, fabric and fabric w/79 or 149 slatwall509h horizon with 109 modesty
description w d h pattern no. 10 20 30 40
Universal privacy sceen, fabric509h horizon with 109 modesty
249 19 31 7/89 D1PS5024F $735. $790. $825. $851.
309 19 31 7/89 D1PS5030F 754. 811. 849. 877.
369 19 31 7/89 D1PS5036F 818. 877. 914. 947.
429 19 31 7/89 D1PS5042F 831. 899. 935. 967.
489 19 31 7/89 D1PS5048F 854. 922. 963. 997.
549 19 31 7/89 D1PS5054F 879. 947. 989. 1,021.
609 19 31 7/89 D1PS5060F 905. 975. 1,019. 1,054.
Universal privacy sceen, fabric w/79 slatwall,509h horizon with 109 modesty
249 19 31 7/89 D1PS5024W1 883. 948. 990. 1,026.
309 19 31 7/89 D1PS5030W1 966. 1,041. 1,086. 1,123.
369 19 31 7/89 D1PS5036W1 1,037. 1,118. 1,166. 1,211.
429 19 31 7/89 D1PS5042W1 1,118. 1,205. 1,260. 1,305.
489 19 31 7/89 D1PS5048W1 1,161. 1,249. 1,308. 1,353.
549 19 31 7/89 D1PS5054W1 1,290. 1,394. 1,455. 1,507.
609 19 31 7/89 D1PS5060W1 1,343. 1,441. 1,510. 1,562.
Universal privacy sceen, fabric w/149 slatwall,509h horizon with 109 modesty
249 19 31 7/89 D1PS5024W2 1,042. 1,120. 1,170. 1,214.
309 19 31 7/89 D1PS5030W2 1,187. 1,278. 1,332. 1,381.
369 19 31 7/89 D1PS5036W2 1,267. 1,364. 1,428. 1,473.
429 19 31 7/89 D1PS5042W2 1,401. 1,514. 1,580. 1,635.
489 19 31 7/89 D1PS5048W2 1,463. 1,577. 1,649. 1,709.
549 19 31 7/89 D1PS5054W2 1,697. 1,835. 1,918. 1,983.
609 19 31 7/89 D1PS5060W2 1,767. 1,903. 1,991. 2,060.
Order Code
Universal Privacy Screen
Example: D1PS5024FD Dividends
1 Generation 1
PS Privacy Screen
50 Height
24 Width
Fabric Fabric
Specification Information
Pricing listed is for textured paint.
Add $35 to the list prices above forsmooth paint finish option.
Slatwall color matches screen backcolor.
Application Notes
Privacy screen attaches tounderside of any standardworksurface.
Privacy screens are actual width.
Cantilevers are color matched andeach include a knockout with coverto provide horizontal management ofcables.
509 horizon screen providesapproximately 17 1/29 of privacyabove worksurface height and 109 ofmodesty coverage belowworksurface height.
Wire Management TroughEach screen includes a steel troughthat sits between the cantilevers tosupport and/or conceal excess wires.
Dividends Horizon
291
Wor
ksur
face
Sup
port
san
dS
cree
ns
Panel Mounted Worksurface SupportsOpen Support Leg, C-Leg and Worksurface End Panel
description type w d h pattern no. P1 P2 P3
Panel Mounted C-Leg Worksurface Support(Left-hand shown)
Left-hand C-Leg 26 7/89 DB1CL24L $483. $530. $551.
Right-hand C-Leg 26 7/89 DB1CL 24R 483. 530. 551.
Shared C-Leg 26 7/89 DB1CL24S 509. 562. 591.
Panel Mounted C-Leg Worksurface SupportRadiused Foot (Right-hand shown)
LH Shared Worksurface C-Leg 26 7/89 DB2CL24LS 605. 670. 695.
LH Single Worksurface C-Leg 26 7/89 DB2CL24L 573. 630. 660.
RH Shared Worksurface C-Leg 26 7/89 DB2CL24RS 605. 670. 695.
RH Single Worksurface C-Leg 26 7/89 DB2CL24R 573. 630. 660.
Open Support LegPanel Attachment
39 159 26 7/89 DB1LSP15( ) 462. 488. 508.
39 189 26 7/89 DB1LSP18( ) 462. 488. 508.
39 249 26 7/89 DB1LSP24( ) 452. 481. 504.
39 309 26 7/89 DB1LSP30( ) 479. 501. 527.
39 369 26 7/89 DB1LSP36( ) 505. 530. 551.
Open Support LegScreen Attachment
39 159 26 7/89 DB1LSS15( ) 462. 488. 508.
39 189 26 7/89 DB1LSS18( ) 462. 488. 508.
39 249 26 7/89 DB1LSS24( ) 452. 481. 504.
39 309 26 7/89 DB1LSS30( ) 479. 501. 527.
39 369 26 7/89 DB1LSS36( ) 505. 530. 551.
Worksurface End PanelPanel Attachment
1 1/49 159 26 7/89 DB1PSP15 421. 460. 485.
1 1/49 189 26 7/89 DB1PSP18 438. 483. 504.
1 1/49 199 26 7/89 DB1PSP19 458. 495. 519.
1 1/49 249 26 7/89 DB1PSP24 481. 529. 550.
1 1/49 309 26 7/89 DB1PSP30 514. 569. 595.
1 1/49 369 26 7/89 DB1PSP36 549. 605. 631.
Ordering Information
Panel-Mounted C-LegWorksurface Support
1. Pattern Number2. Paint Finish
Worksurface End Panel
1. Pattern Number2. Paint Finish
Open Support Leg
1. Pattern Number2. Paint Finish
Order Code
Panel Mounted C-LegWorksurface Support
Example: DB1 CL24R, 117
DB1CL24R
Pattern Number
117 Soft Grey finish
Worksur-face EndPanel
Example: DB1 PSP 24
DB1 PSP24
Pattern Number
117 Soft Grey finish
Included with:
Panel-Mounted C-LegWorksurface Support
• C-leg foot• C-leg column• Panel attachment bracket• C-leg flat bracket• Leveling glides
Worksurface End Panel
• Panel attachment bracket• Leveling glides
Note: Open Support Legs are onlyavailable in Knoll core finishes.
Note: The shared open support legis designed for use where 2 panelsmeet. It cannot be used at the end ofa panel run.
Options
Open Support Leg Option(R) = Right-hand leg(L) = Left-hand leg(S) = Shared leg
Note: Worksurface end panels arefor use with panels only.
Dividends Horizon
292
Peninsula Worksurface SupportsRound Support Column, T-Support Base and A Leg
description w d h pattern no. P1 P2 P3
T-End Unit 21 13/169 129 26 7/89 DD1TEU24 $452. $503. $527.
27 13/169 129 26 7/89 DD1TEU30 501. 547. 572.
T-Support Base 23 1/29 129 26 7/89 DB1TB 430. 474. 493.
Round Support Column 49 49 26 7/89 DB1S CR 371. 387. 416.
A Leg 39 159 26 7/89 DB1LS15A 487. 536. 556.
39 189 26 7/89 DB1LS18A 504. 551. 574.
39 249 26 7/89 DB1LS24A 519. 571. 595.
39 309 26 7/89 DB1LS30A 539. 591. 611.
39 369 26 7/89 DB1LS36A 549. 605. 629.
2.59 Round Support Column DBSCR 371. 387. 416.
Dimensions listed under w d t are actual to the nearest 1/169
Ordering Information
T-End Unit
1. Pattern Number2. Paint Finish
T-Support Base
1. Pattern Number2. Paint Finish
A Leg
1. Pattern Number2. Paint Finish
Round Support Column
1. Pattern Number2. Paint Finish
Order Code
T-End Unit
Example: DD1TEU24, 115
DD1TEU24Pattern Number
115 Medium Grey PaintFinish
T-Support Base
Example: DB1TB, 115
DB1TB Pattern Number
115 Medium Grey PaintFinish
Round Support Column
Example: DB1SCR,118
DB1SCR Pattern Number
118 Bright White PaintFinish
Included with:
T-End Unit
• Worksurface
T-Support Base
Note: The A leg is for use inpeninsula worksurface applicationsonly. It is not to be used infreestanding applications.
Note: A Legs are only available inKnoll core finishes.
Options
T-End Unit
T-Support Base
A Leg
Round Support Column
Dividends Horizon
293
Wor
ksur
face
Sup
port
san
dS
cree
ns
Y Leg TablesFreestanding Rectangular Table Top249 and 309 Deep
description w* w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
249 Deep Rectangular with(2) Y-Legs, No Grommet
(with stretcher shown)
609 59 13/169 23 1/29 1 1/49 28 1/29 DT1ARY6024NS $2,250. $2,477. $2,576. $2,578. $2,835. $2,952.
669 65 13/169 23 1/29 1 1/49 28 1/29 DT1ARY6624NS 2,276. 2,506. 2,603. 2,618. 2,884. 3,000.
729 71 13/169 23 1/29 1 1/49 28 1/29 DT1ARY7224NS 2,300. 2,533. 2,635. 2,663. 2,929. 3,046.
789 77 13/169 23 1/29 1 1/49 28 1/29 DT1ARY7824NS 2,327. 2,558. 2,661. 2,707. 2,979. 3,099.
849 83 13/169 23 1/29 1 1/49 28 1/29 DT1ARY8424NS 2,369. 2,604. 2,710. 2,752. 3,026. 3,147.
909 89 13/169 23 1/29 1 1/49 28 1/29 DT1ARY9024NS 2,409. 2,655. 2,759. 2,792. 3,075. 3,193.
969 95 13/169 23 1/29 1 1/49 28 1/29 DT1ARY9624NS 2,453. 2,701. 2,806. 2,833. 3,117. 3,245.
309 Deep Rectangular with(2) Y-Legs, No Grommet
(with stretcher shown)
609 59 13/169 29 1/29 1 1/49 28 1/29 DT1ARY6030NS 2,308. 2,540. 2,642. 2,637. 2,899. 3,014.
669 65 13/169 29 1/29 1 1/49 28 1/29 DT1ARY6630NS 2,341. 2,576. 2,680. 2,685. 2,954. 3,072.
729 71 13/169 29 1/29 1 1/49 28 1/29 DT1ARY7230NS 2,373. 2,608. 2,716. 2,735. 3,010. 3,131.
789 77 13/169 29 1/29 1 1/49 28 1/29 DT1ARY7830NS 2,404. 2,647. 2,754. 2,786. 3,064. 3,187.
849 83 13/169 29 1/29 1 1/49 28 1/29 DT1ARY8430NS 2,451. 2,698. 2,803. 2,833. 3,117. 3,245.
909 89 13/169 29 1/29 1 1/49 28 1/29 DT1ARY9030NS 2,496. 2,747. 2,856. 2,885. 3,171. 3,300.
969 95 13/169 29 1/29 1 1/49 28 1/29 DT1ARY9630NS 2,541. 2,795. 2,907. 2,937. 3,229. 3,357.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/169
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ARY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assembly
R Rectangular shape
Y Y Leg Base
60 Overall width in inches
24 Overall depth in inches
N No grommet
S Stretcher
114 Base/ stretcher paintfinish
114 Laminate top finish
114 Edgeband finish
Included with:
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $18.
Stretcher Option:
• A stretcher is optional on 249 and309 deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from the patternnumber with an ‘‘N’’.Stretchers are required on 369
and 429 depths.
Dividends Horizon
294
Y Leg TablesFreestanding Rectangular Table Top369 and 429 Deep
description w* w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
369 Deep Rectangular with(2) Y-Legs, No Grommet
609 59 13/169 35 1/29 1 1/49 28 1/29 DT1ARY6036N $2,386. $2,620. $2,726. $2,754. $3,029. $3,147.
669 65 13/169 35 1/29 1 1/49 28 1/29 DT1ARY6636N 2,429. 2,668. 2,778. 2,804. 3,087. 3,210.
729 71 13/169 35 1/29 1 1/49 28 1/29 DT1ARY7236N 2,467. 2,716. 2,825. 2,860. 3,146. 3,271.
789 77 13/169 35 1/29 1 1/49 28 1/29 DT1ARY7836N 2,509. 2,761. 2,871. 2,913. 3,205. 3,334.
849 83 13/169 35 1/29 1 1/49 28 1/29 DT1ARY8436N 2,550. 2,806. 2,918. 2,970. 3,265. 3,394.
909 89 13/169 35 1/29 1 1/49 28 1/29 DT1ARY9036N 2,593. 2,852. 2,968. 3,023. 3,326. 3,456.
969 95 13/169 35 1/29 1 1/49 28 1/29 DT1ARY9636N 2,637. 2,899. 3,014. 3,077. 3,385. 3,517.
429 Deep Rectangular with(2) Y-Legs, No Grommet
849 83 13/169 41 1/29 1 1/49 28 1/29 DT1ARY8442N 2,615. 2,881. 2,998. 3,320. 3,652. 3,801.
909 89 13/169 41 1/29 1 1/49 28 1/29 DT1ARY9042N 2,672. 2,940. 3,058. 3,368. 3,705. 3,853.
969 95 13/169 41 1/29 1 1/49 28 1/29 DT1ARY9642N 2,715. 2,987. 3,104. 3,413. 3,753. 3,903.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/169
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ARY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assembly
R Rectangular shape
Y Y Leg Base
60 Overall width in inches
24 Overall depth in inches
N No grommet
S Stretcher
114 Base/ stretcher paintfinish
114 Laminate top finish
114 Edgeband finish
Included with:
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $18.
Stretcher Option:
• A stretcher is optional on 249 and309 deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from the patternnumber with an ‘‘N’’.Stretchers are required on 369
and 429 depths.
Dividends Horizon
295
Tabl
es
Y Leg TablesFreestanding Racetrack Table Top249 and 309 Deep
description w* w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
249 Deep Racetrack with(2) Y-Legs, No Grommet
(with stretcher shown)
609 59 13/169 23 1/29 1 1/49 28 1/29 DT1ATY6024NS $2,248. $2,476. $2,575. $4,016. $4,415. $4,596.
669 65 13/169 23 1/29 1 1/49 28 1/29 DT1ATY6624NS 2,321. 2,550. 2,655. 4,055. 4,457. 4,637.
729 71 13/169 23 1/29 1 1/49 28 1/29 DT1ATY7224NS 2,388. 2,629. 2,731. 4,089. 4,501. 4,679.
789 77 13/169 23 1/29 1 1/49 28 1/29 DT1ATY7824NS 2,457. 2,704. 2,812. 4,128. 4,543. 4,720.
849 83 13/169 23 1/29 1 1/49 28 1/29 DT1ATY8424NS 2,501. 2,751. 2,860. 4,161. 4,579. 4,764.
909 89 13/169 23 1/29 1 1/49 28 1/29 DT1ATY9024NS 2,541. 2,795. 2,907. 4,201. 4,621. 4,808.
969 95 13/169 23 1/29 1 1/49 28 1/29 DT1ATY9624NS 2,586. 2,844. 2,958. 4,239. 4,661. 4,850.
309 Deep Racetrack with(2) Y-Legs, No Grommet
(with stretcher shown)
609 59 13/169 29 1/29 1 1/49 28 1/29 DT1ATY6030NS 2,339. 2,571. 2,674. 4,076. 4,486. 4,664.
669 65 13/169 29 1/29 1 1/49 28 1/29 DT1ATY6630NS 2,402. 2,644. 2,751. 4,116. 4,528. 4,709.
729 71 13/169 29 1/29 1 1/49 28 1/29 DT1ATY7230NS 2,470. 2,716. 2,825. 4,154. 4,571. 4,754.
789 77 13/169 29 1/29 1 1/49 28 1/29 DT1ATY7830NS 2,536. 2,787. 2,899. 4,195. 4,617. 4,803.
849 83 13/169 29 1/29 1 1/49 28 1/29 DT1ATY8430NS 2,582. 2,841. 2,954. 4,238. 4,660. 4,848.
909 89 13/169 29 1/29 1 1/49 28 1/29 DT1ATY9030NS 2,630. 2,892. 3,007. 4,277. 4,704. 4,892.
969 95 13/169 29 1/29 1 1/49 28 1/29 DT1ATY9630NS 2,675. 2,946. 3,061. 4,314. 4,748. 4,939.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/169
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ATY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assembly
T Racetrack shape
Y Y Leg Base
60 Overall width in inches
24 Overall depth in inches
N No grommet
S Stretcher
114 Base/ stretcher paintfinish
114 Laminate top finish
114 Edgeband finish
Included With
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $18.
Stretcher Option:
• A stretcher is optional on 249 and309 deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from patternnumber with an ‘‘N’’.Stretchers are required on 369
and 429 depths.
Dividends Horizon
296
Y Leg TablesFreestanding Racetrack Table Top369 and 429 Deep
description w* w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
369 Deep Racetrack with(2) Y-Legs, No Grommet
609 59 13/169 35 1/29 1 1/49 28 1/29 DT1ATY6036N $2,418. $2,661. $2,765. $4,135. $4,551. $4,732.
669 65 13/169 35 1/29 1 1/49 28 1/29 DT1ATY6636N 2,495. 2,743. 2,852. 4,181. 4,596. 4,781.
729 71 13/169 35 1/29 1 1/49 28 1/29 DT1ATY7236N 2,567. 2,826. 2,939. 4,221. 4,643. 4,831.
789 77 13/169 35 1/29 1 1/49 28 1/29 DT1ATY7836N 2,644. 2,907. 3,025. 4,265. 4,692. 4,880.
849 83 13/169 35 1/29 1 1/49 28 1/29 DT1ATY8436N 2,685. 2,955. 3,072. 4,309. 4,739. 4,932.
909 89 13/169 35 1/29 1 1/49 28 1/29 DT1ATY9036N 2,727. 3,001. 3,119. 4,349. 4,789. 4,981.
969 95 13/169 35 1/29 1 1/49 28 1/29 DT1ATY9636N 2,768. 3,045. 3,168. 4,395. 4,836. 5,029.
429 Deep Racetrack with(2) Y-Legs, No Grommet
849 83 13/169 41 1/29 1 1/49 28 1/29 DT1ATY8442N 2,751. 3,025. 3,145. 4,385. 4,825. 5,015.
909 89 13/169 41 1/29 1 1/49 28 1/29 DT1ATY9042N 2,802. 3,084. 3,207. 4,432. 4,874. 5,066.
969 95 13/169 41 1/29 1 1/49 28 1/29 DT1ATY9642N 2,852. 3,141. 3,264. 4,473. 4,924. 5,123.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/169
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ATY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assembly
T Racetrack shape
Y Y Leg Base
60 Overall width in inches
24 Overall depth in inches
N No grommet
S Stretcher
114 Base/ stretcher paintfinish
114 Laminate top finish
114 Edgeband finish
Included With
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $18.
Stretcher Option:
• A stretcher is optional on 249 and309 deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from patternnumber with an ‘‘N’’.Stretchers are required on 369
and 429 depths.
Dividends Horizon
297
Tabl
es
Y Leg TablesCredenza Supported Rectangular Table Top249, 309 and 369 deep
description w* w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
249 Deep Rectangular with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
609 59 13/169 23 1/29 1 1/49 28 1/29 DT1CRY6024N $1,880. $2,070. $2,153. $2,206. $2,428. $2,520.
669 65 13/169 23 1/29 1 1/49 28 1/29 DT1CRY6624N 1,904. 2,096. 2,181. 2,245. 2,472. 2,569.
729 71 13/169 23 1/29 1 1/49 28 1/29 DT1CRY7224N 1,929. 2,123. 2,210. 2,288. 2,516. 2,617.
789 77 13/169 23 1/29 1 1/49 28 1/29 DT1CRY7824N 1,954. 2,151. 2,236. 2,335. 2,566. 2,668.
849 83 13/169 23 1/29 1 1/49 28 1/29 DT1CRY8424N 1,997. 2,196. 2,284. 2,378. 2,611. 2,718.
909 89 13/169 23 1/29 1 1/49 28 1/29 DT1CRY9024N 2,043. 2,242. 2,335. 2,418. 2,661. 2,764.
969 95 13/169 23 1/29 1 1/49 28 1/29 DT1CRY9624N 2,083. 2,290. 2,384. 2,462. 2,707. 2,816.
309 Deep Rectangular with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
609 59 13/169 29 1/29 1 1/49 28 1/29 DT1CRY6030N 1,937. 2,127. 2,214. 2,263. 2,486. 2,587.
669 65 13/169 29 1/29 1 1/49 28 1/29 DT1CRY6630N 1,966. 2,162. 2,248. 2,312. 2,543. 2,644.
729 71 13/169 29 1/29 1 1/49 28 1/29 DT1CRY7230N 1,999. 2,197. 2,286. 2,363. 2,598. 2,702.
789 77 13/169 29 1/29 1 1/49 28 1/29 DT1CRY7830N 2,031. 2,234. 2,325. 2,409. 2,655. 2,759.
849 83 13/169 29 1/29 1 1/49 28 1/29 DT1CRY8430N 2,079. 2,284. 2,378. 2,462. 2,707. 2,816.
909 89 13/169 29 1/29 1 1/49 28 1/29 DT1CRY9030N 2,123. 2,338. 2,432. 2,510. 2,762. 2,871.
969 95 13/169 29 1/29 1 1/49 28 1/29 DT1CRY9630N 2,169. 2,388. 2,483. 2,559. 2,818. 2,927.
369 Deep Rectangular with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
609 59 13/169 35 1/29 1 1/49 28 1/29 DT1CRY6036N 2,054. 2,259. 2,345. 2,417. 2,660. 2,764.
669 65 13/169 35 1/29 1 1/49 28 1/29 DT1CRY6636N 2,089. 2,298. 2,391. 2,467. 2,716. 2,823.
729 71 13/169 35 1/29 1 1/49 28 1/29 DT1CRY7236N 2,129. 2,342. 2,435. 2,515. 2,767. 2,881.
789 77 13/169 35 1/29 1 1/49 28 1/29 DT1CRY7836N 2,168. 2,386. 2,481. 2,567. 2,825. 2,938.
849 83 13/169 35 1/29 1 1/49 28 1/29 DT1CRY8436N 2,221. 2,444. 2,541. 2,615. 2,878. 2,993.
909 89 13/169 35 1/29 1 1/49 28 1/29 DT1CRY9036N 2,276. 2,505. 2,603. 2,668. 2,936. 3,051.
969 95 13/169 35 1/29 1 1/49 28 1/29 DT1CRY9636N 2,333. 2,563. 2,664. 2,718. 2,989. 3,108.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/169
Ordering Information
Credenza Supported Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Credenza Supported Y Leg Table:
Example: DT1CRY6024N, 114,114, 114
DT1 Dividends HorizonTable
C Credenza supportassembly
R Rectangular shape
Y Y Leg Base
60 Overall width in inches
24 Overall depth in inches
N No grommet
114 Base/ stretcher paintfinish
114 Laminate top finish
114 Edgeband finish
Included with
Credenza Supported Y leg Table:
• (1) Y Leg• (1) Credenza support spacer• Hardware kit• Table top• Stiffening plate
Credenza must be specifiedseparately
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $18.
Note: Credenza supported tablesmay be used with laminate or veneertop credenzas only and are notcompatible with steel top credenzas.
Dividends Horizon
298
Y Leg TablesCredenza Supported Racetrack Table Top249, 309 and 369 deep
description w* w d h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
249 Deep Racetrack with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
609 59 13/169 23 1/29 28 1/29 DT1CTY6024N $1,878. $2,066. $2,151. $3,676. $4,043. $4,153.
669 65 13/169 23 1/29 28 1/29 DT1CTY6624N 1,947. 2,143. 2,229. 3,697. 4,068. 4,188.
729 71 13/169 23 1/29 28 1/29 DT1CTY7224N 2,019. 2,219. 2,306. 3,715. 4,089. 4,217.
789 77 13/169 23 1/29 28 1/29 DT1CTY7824N 2,086. 2,294. 2,387. 3,739. 4,113. 4,250.
849 83 13/169 23 1/29 28 1/29 DT1CTY8424N 2,111. 2,321. 2,411. 3,755. 4,135. 4,281.
909 89 13/169 23 1/29 28 1/29 DT1CTY9024N 2,131. 2,344. 2,439. 3,779. 4,155. 4,312.
969 95 13/169 23 1/29 28 1/29 DT1CTY9624N 2,154. 2,372. 2,464. 3,799. 4,182. 4,345.
309 Deep Racetrack with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
609 59 13/169 29 1/29 28 1/29 DT1CTY6030N 1,966. 2,162. 2,248. 3,699. 4,069. 4,205.
669 65 13/169 29 1/29 28 1/29 DT1CTY6630N 2,032. 2,236. 2,327. 3,741. 4,115. 4,256.
729 71 13/169 29 1/29 28 1/29 DT1CTY7230N 2,098. 2,306. 2,399. 3,780. 4,158. 4,309.
789 77 13/169 29 1/29 28 1/29 DT1CTY7830N 2,162. 2,382. 2,476. 3,821. 4,205. 4,356.
849 83 13/169 29 1/29 28 1/29 DT1CTY8430N 2,212. 2,432. 2,532. 3,864. 4,250. 4,409.
909 89 13/169 29 1/29 28 1/29 DT1CTY9030N 2,259. 2,483. 2,582. 3,903. 4,299. 4,461.
969 95 13/169 29 1/29 28 1/29 DT1CTY9630N 2,302. 2,536. 2,638. 3,946. 4,341. 4,513.
369 Deep Racetrack with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
609 59 13/169 35 1/29 28 1/29 DT1CTY6036N 2,082. 2,288. 2,383. 3,719. 4,092. 4,256.
669 65 13/169 35 1/29 28 1/29 DT1CTY6636N 2,154. 2,372. 2,464. 3,783. 4,159. 4,329.
729 71 13/169 35 1/29 28 1/29 DT1CTY7236N 2,229. 2,451. 2,549. 3,843. 4,228. 4,397.
789 77 13/169 35 1/29 28 1/29 DT1CTY7836N 2,300. 2,533. 2,635. 3,907. 4,300. 4,466.
849 83 13/169 35 1/29 28 1/29 DT1CTY8436N 2,354. 2,589. 2,696. 3,968. 4,367. 4,543.
909 89 13/169 35 1/29 28 1/29 DT1CTY9036N 2,406. 2,649. 2,756. 4,029. 4,434. 4,612.
969 95 13/169 35 1/29 28 1/29 DT1CTY9636N 2,461. 2,706. 2,815. 4,091. 4,502. 4,684.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/169
Ordering Information
Credenza Supported Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Credenza Supported Y Leg Table:
Example: DT1CTY6024N, 114,114, 114
DT1 Dividends HorizonTable
C Credenza supportassembly
T Racetrack shape
Y Y Leg Base
60 Overall width in inches
24 Overall depth in inches
N No grommet
114 Base/ stretcher paintfinish
114 Laminate top finish
114 Edgeband finish
Included with
Credenza Supported Y Leg Table:
• (1) Y Leg• (1) Credenza support spacer• Hardware kit• Table top• Stiffening plate
Credenza must be specifiedseparately
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $18.
Note: Credenza supported tablesmay be used with laminate or veneertop credenzas only and are notcompatible with steel top credenzas.
Dividends Horizon
299
Tabl
es
X Base TablesSquare Table Tops179, 219, 289, 369 and 429 High
description w* w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
179 High Square X Base Table 309 29 13/169 29 13/169 1 1/49 179 DT1ASX303017 $1,367. $1,510. $1,570. $2,022. $2,234. $2,324.
369 35 13/169 35 13/169 1 1/49 179 DT1ASX363617 1,428. 1,577. 1,640. 2,135. 2,351. 2,446.
429 41 13/169 41 13/169 1 1/49 179 DT1ASX424217 1,586. 1,747. 1,815. 2,262. 2,487. 2,589.
489 47 13/169 47 13/169 1 1/49 179 DT1ASX484817 1,662. 1,835. 1,905. 2,350. 2,588. 2,696.
219 High Square X Base Table 309 29 13/169 29 13/169 1 1/49 219 DT1ASX303021 1,367. 1,510. 1,570. 2,022. 2,234. 2,324.
369 35 13/169 35 13/169 1 1/49 219 DT1ASX363621 1,428. 1,577. 1,640. 2,135. 2,351. 2,446.
429 41 13/169 41 13/169 1 1/49 219 DT1ASX424221 1,586. 1,747. 1,815. 2,262. 2,487. 2,589.
489 47 13/169 47 13/169 1 1/49 219 DT1ASX484821 1,662. 1,835. 1,905. 2,350. 2,588. 2,696.
289 High Square X Base Table 309 29 13/169 29 13/169 1 1/49 28 1/29 DT1ASX3030 1,401. 1,542. 1,602. 2,054. 2,265. 2,354.
369 35 13/169 35 13/169 1 1/49 28 1/29 DT1ASX3636 1,461. 1,605. 1,669. 2,167. 2,384. 2,478.
429 41 13/169 41 13/169 1 1/49 28 1/29 DT1ASX4242 1,615. 1,780. 1,848. 2,290. 2,518. 2,618.
489 47 13/169 47 13/169 1 1/49 28 1/29 DT1ASX4848 1,692. 1,863. 1,939. 2,383. 2,617. 2,724.
369 High Square X Base Table 309 29 13/169 29 13/169 1 1/49 369 DT1ASX303036 1,478. 1,619. 1,682. 2,129. 2,342. 2,432.
369 35 13/169 35 13/169 1 1/49 369 DT1ASX363636 1,539. 1,684. 1,748. 2,242. 2,461. 2,555.
429 41 13/169 41 13/169 1 1/49 369 DT1ASX424236 1,691. 1,854. 1,926. 2,369. 2,598. 2,699.
489 47 13/169 47 13/169 1 1/49 369 DT1ASX484836 1,771. 1,942. 2,017. 2,460. 2,698. 2,801.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/169
Dividends Horizon
300
Wall Mounting Suggestions
The following information is provided only as a guide, and represents minimum
recommendations only. Knoll does not accept responsibility for the attachment of any Knoll
product to a Customer’s site wall. Wall specification/construction is the responsibility of the
Customer and its structural engineer/architect. Failure to properly attach Knoll products
to adequate wall structures can lead to property damage and/or personal injury.
You should consult your own structural engineers and/or architects
and must not rely on the information provided herein.
It is the responsibility of the Customer and its structural engineers/architects to verify
that the permanent structural walls (studs, blocks, solid masonry, etc.) on which the
Knoll products are intended to be mounted are designed appropriately to support
the product weight, PLUS 3 lbs. per linear inch for each useable shelf length
NOTE: A cabinet’s top is considered a “useable shelf” and MUST be
included in the calculation of the total load for an overhead cabinet.
It is the responsibility of the Customer and its structural engineer/architects to specify the
fasteners and method for attaching the Knoll supplied wall mounting cleat, bracket, frame, etc.
to the supporting wall and to confirm that the installers have adhered to these specifications.
For all local building standards and codes, and additional requirements (including, but not
limited to, seismic conditions) the Customer should always consult local code agencies.
Wall Mounting of Knoll Products Dividends Horizon
301
NEW CONSTRUCTION
Cinder Block or Poured Concrete Masonry Wall
Wood Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Wood Stud Wall, the studs being only Ceiling Height
Steel Stud Wall, the studs being FULL HEIGHT to the roof/floor above
Steel Stud Wall, the studs being only Ceiling Height
Stud Specification
Wood studs, grade #2 or better, 3 1/2" minimum width, OR Metal studs, minimum 25 gage thickness, 3 5/8" minimum width
The wall must be a minimum of 6" thick, and must be full height to the roof/floor structure above
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Wood studs must be Grade #2, or better, 3 1/2" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Metal studs must be minimum 25 gage thickness, 3 5/8" minimum width
Stud Centers
Metal and wood studs must be spaced at 16" c/c maximum
N/A Wood studs must be spaced at 16" c/c maximum
Wood studs must be spaced at 16"" c/c maximum"
Metal studs must be spaced at 16" c/c maximum
Metal studs must be spaced at 16" c/c maximum
Stud Height
Metal and wood studs must extend upwards, and be securely attached to the roof/floor structure above
Wood studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix #2 grade 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof/floor structure above
Metal studs must be braced above the ceiling, and be securely attached to the roof/floor structure above
Affix metal bracing 'cap' across the top of the studs, then place diagonal studs from the top cap up to underside of the roof / floor structure above
Mounting the Knoll Supplied Cleat, Bracket, Frame, etc*
Insert a 2" X 6" wood block, #2 grade or better, [or a DanbackTM flexible wood backing system] horizontally between each of the studs to accommodate the full width of the cabinet, and beyond to the next stud.
Fasten the wood block to each stud using three screws at the ends of each block. (Fasten the Danback™ as directed by the manufacturer)
Fasten the Knoll supplied wall mounting cleat, bracket, frame, etc directly to each wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
Fasten the Knoll supplied cabinet wall mounting cleat, bracket, frame, etc. directly to the masonry wall every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wall every 6", and fasten the lower horizontal element to the wall every 16"
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
In the desired location of the cabinet mounting rail, remove an 8" high section of drywall the width of the cabinet, and beyond to the next stud.
Insert a 2" X 6" wood block, #2 grade or better, [or a Danback™ flexible wood backing system] horizontally between each of the exposed studs.
Fasten the wood block to each stud using three screws at the ends of each block.
Replace the drywall and repair as desired.
Fasten the Knoll supplied wall mounting cleat, rail, frame, etc directly to the wood block every 6"
For wall mounting structures that have a rectangular frame-like configuration: fasten the top horizontal element of the frame to the wood blocking every 6", and fasten the lower horizontal element to each wall stud, using one fastener per stud.
*Graham Wall Hung Shelf
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall mounting brackets directly to the masonry wall, using the holes provided in each bracket
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
The Graham Wall Hung Shelf Bracket (and others like it) requires full support behind the full height of the bracket
This should be accomplished by insertion of additional 2"X 6" wood blocking between the studs as defined above
Fasten the Knoll supplied wall cleat with...
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
3/16" x 3 1/2" Tapcon Masonry Screws or equiv. @ 6" c/c with
1-1/4" embedment, screwed directly into the masonry wall
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
#10 x 2 1/2" Grabber Woodys Screws or equiv. @ 6" c/c, screwed directly into the wood blocking
EXISTING CONSTRUCTION
Wall Mounting of Knoll Products Dividends Horizon
302
pattern no. page
AWM1 S36 277
AWM1 S42 277
AWM1 S48 277
AWM1 S60 277
AWM1 S66 277
AWM1 S72 277
AWM1 S78 277
AWM1 S84 277
D19 5430N 244
D19 6030N 245
D19 6630N 245
D19 7230N 245
D19 7830N 245
D19 7836N 245
D19 8430N 245
D19 9030N 245
D1BD6048SL 243
D1BD6048SR 244
D1BD6648DL 243
D1BD6648DR 244
D1BD6648SL 243
D1BD6648SR 244
D1BD7242DL 244
D1BD7242DR 244
D1BD7242SL 243
D1BD7242SR 244
D1BD7248DL 244
D1BD7248DR 244
D1BD7248SL 243
D1BD7248SR 244
D1BD7848DL 244
D1BD7848DR 244
D1BD7848SL 243
D1BD7848SR 244
D1BD8448DL 244
D1BD8448DR 244
D1BD8448SL 243
D1BD8448SR 244
D1C 3618N 239
D1C 3624N 239
D1C 422430N 239
D1C 4224N 239
D1C 423024N 239
D1C 482430N 239
D1C 4824N 239
D1C 483024N 239
D1C 4830N 239
D1CRL24 246
D1CRN24 246
D1CRR24 246
D1CRR30 246
D1CS 4224N 239
D1CS 4824N 239
D1CS 4830N 239
D1D 3024N 243
D1D 3030N 243
D1D 3624N 243
D1D 3630N 243
D1D 4824N 243
D1D 4830N 243
D1D 5424N 243
pattern no. page
D1D 5430N 243
D1D 5436N 243
D1D 6024N 243
D1D 6030N 243
D1D 6036N 243
D1D 6624N 243
D1D 6630N 243
D1D 6636N 243
D1D 7224N 243
D1D 7230N 243
D1D 7236N 243
D1D 7824N 243
D1D 7830N 243
D1D 7836N 243
D1D 8424N 243
D1D 8430N 243
D1D 8436N 243
D1D 9624N 243
D1D 9630N 243
D1D 9636N 243
D1H4818 246
D1H5118P 246
D1H6024 246
D1H6324P 246
D1L 3636SSN 240
D1L 3648SSN 240
D1L 3654SSN 240
D1L 3660SSN 240
D1L 3672SSN 240
D1L 3678SSN 240
D1L 4242SSN 240
D1L 4248SSN 240
D1L 4254SSN 240
D1L 4260SSN 240
D1L 4266SSN 240
D1L 4272SSN 240
D1L 4278SSN 240
D1L 4284SSN 240
D1L 4836SSN 240
D1L 4842SSN 240
D1L 4848DDN 242
D1L 4848DSN 242
D1L 4848SDN 242
D1L 4848SSN 240
D1L 4854SSN 240
D1L 4860DSN 242
D1L 4860SDN 242
D1L 4860SSN 240
D1L 4866DSN 242
D1L 4866SDN 242
D1L 4866SSN 240
D1L 4872DSN 242
D1L 4872SDN 242
D1L 4872SSN 240
D1L 4878SSN 240
D1L 4884SSN 240
D1L 4896SSN 240
D1L 5436SSN 240
D1L 5442SSN 240
D1L 5448SSN 240
D1L 6036SSN 241
pattern no. page
D1L 6042SSN 241
D1L 6048DSN 242
D1L 6048SDN 242
D1L 6048SSN 241
D1L 6642SSN 241
D1L 6648DSN 242
D1L 6648SDN 242
D1L 6648SSN 241
D1L 7236SSN 241
D1L 7242SSN 241
D1L 7248DSN 242
D1L 7248SDN 242
D1L 7248SSN 241
D1L 7836SSN 241
D1L 7842SSN 241
D1L 7848SSN 241
D1L 8442SSN 241
D1L 8448SSN 241
D1L 9648SSN 241
D1P 5430N 244
D1P 6030N 244
D1P 6630N 244
D1P 7230N 244
D1P 7830N 244
D1P 7836N 244
D1P 8430N 244
D1P 9030N 244
D1PS1024F 285
D1PS1024S 284
D1PS1030F 285
D1PS1030S 284
D1PS1036F 285
D1PS1036S 284
D1PS1042F 285
D1PS1042S 284
D1PS1048F 285
D1PS1048S 284
D1PS1054F 285
D1PS1054S 284
D1PS1060F 285
D1PS1060S 284
D1PS4224F 286
D1PS4224S 287
D1PS4224W1 286
D1PS4230F 286
D1PS4230S 287
D1PS4230W1 286
D1PS4236F 286
D1PS4236S 287
D1PS4236W1 286
D1PS4242F 286
D1PS4242S 287
D1PS4242W1 286
D1PS4248F 286
D1PS4248S 287
D1PS4248W1 286
D1PS4254F 286
D1PS4254S 287
D1PS4254W1 286
D1PS4260F 286
D1PS4260S 287
pattern no. page
D1PS4260W1 286
D1PS42T24F 290
D1PS42T24S 288
D1PS42T30F 290
D1PS42T30S 288
D1PS42T36F 290
D1PS42T36S 288
D1PS42T42F 290
D1PS42T42S 288
D1PS42T48F 290
D1PS42T48S 288
D1PS42T54F 290
D1PS42T54S 288
D1PS42T60F 290
D1PS42T60S 288
D1PS5024F 291
D1PS5024S 289
D1PS5024W1 291
D1PS5024W2 291
D1PS5030F 291
D1PS5030S 289
D1PS5030W1 291
D1PS5030W2 291
D1PS5036F 291
D1PS5036S 289
D1PS5036W1 291
D1PS5036W2 291
D1PS5042F 291
D1PS5042S 289
D1PS5042W1 291
D1PS5042W2 291
D1PS5048F 291
D1PS5048S 289
D1PS5048W1 291
D1PS5048W2 291
D1PS5054F 291
D1PS5054S 289
D1PS5054W1 291
D1PS5054W2 291
D1PS5060F 291
D1PS5060S 289
D1PS5060W1 291
D1PS5060W2 291
D1R 10224N 230
D1R 10230N 232
D1R 10824N 230
D1R 10830N 232
D1R 11430N 232
D1R 12024N 230
D1R 12030N 232
D1R 1515C 247
D1R 1515S 247
D1R 1818N 229
D1R 1824N 230
D1R 2118N 229
D1R 2124N 230
D1R 2415 247
D1R 2418N 229
D1R 2424N 230
D1R 2430N 232
D1R 2718N 229
Alpha-Numeric Index
303
pattern no. page
D1R 2724N 230
D1R 2730N 232
D1R 3015 247
D1R 3018N 229
D1R 3024N 230
D1R 3030N 232
D1R 3318N 229
D1R 3324N 230
D1R 3330N 232
D1R 3615 247
D1R 3618N 229
D1R 3624N 230
D1R 3630N 232
D1R 3918N 229
D1R 3924N 230
D1R 3930N 232
D1R 4215 247
D1R 4218N 229
D1R 4224N 230
D1R 4230N 232
D1R 4518N 229
D1R 4524N 230
D1R 4530N 232
D1R 4815 247
D1R 4818N 229
D1R 4824N 230
D1R 4830N 232
D1R 5118N 229
D1R 5124N 230
D1R 5130N 232
D1R 5415 247
D1R 5418N 229
D1R 5424N 230
D1R 5430N 232
D1R 5718N 229
D1R 5724N 230
D1R 5730N 232
D1R 6015 247
D1R 6018N 229
D1R 6024N 230
D1R 6030N 232
D1R 6036N 233
D1R 6318N 229
D1R 6324N 230
D1R 6330N 232
D1R 6615 247
D1R 6618N 229
D1R 6624N 230
D1R 6630N 232
D1R 6636N 233
D1R 6918N 229
D1R 6924N 230
D1R 6930N 232
D1R 7215 247
D1R 7218N 229
D1R 7224N 230
D1R 7230N 232
D1R 7236N 233
D1R 7518N 229
D1R 7524N 230
D1R 7530N 232
D1R 7815 247
D1R 7818N 229
D1R 7824N 230
D1R 7830N 232
pattern no. page
D1R 7836N 233
D1R 8118N 229
D1R 8124N 230
D1R 8130N 232
D1R 8415 247
D1R 8418N 229
D1R 8424N 230
D1R 8430N 232
D1R 8436N 233
D1R 8718N 229
D1R 8724N 230
D1R 8730N 232
D1R 9015 247
D1R 9018N 229
D1R 9024N 230
D1R 9030N 232
D1R 9036N 233
D1R 9318N 229
D1R 9324N 230
D1R 9330N 232
D1R 9615 247
D1R 9618N 229
D1R 9624N 230
D1R 9630N 232
D1R 9636N 233
D1R 9918N 229
D1R 9924N 230
D1R 9930N 232
D1R2419N 231
D1R3019N 231
D1R3619N 231
D1R4219N 231
D1R4819N 231
D1R5419N 231
D1R6019N 231
D1R6619N 231
D1R7219N 231
D1R7819N 231
D1R8419N 231
D1R9019N 231
D1R9619N 231
D1W 362430N 234
D1W 363024N 234
D1W 422430N 234
D1W 423024N 234
D1W 482430N 234
D1W 483024N 234
D1W 721830N 234
D1W 722430N 234
D1W 722436N 234
D1W 723018N 234
D1W 723024N 234
D1W 723624N 234
D1W S481824N 235
D1W S481830N 235
D1W S482418N 235
D1W S482430N 235
D1W S483018N 235
D1W S483024N 235
D1W S601824N 235
D1W S601830N 235
D1W S602418N 235
D1W S602430N 235
D1W S603018N 235
D1W S603024N 235
pattern no. page
D1W S661824N 235
D1W S661830N 235
D1W S662418N 235
D1W S662430N 235
D1W S663018N 235
D1W S663024N 235
D1W S721824N 235
D1W S721830N 235
D1W S722418N 235
D1W S722430N 235
D1W S723018N 235
D1W S723024N 235
D1W S781824N 235
D1W S781830N 235
D1W S782418N 235
D1W S782430N 235
D1W S783018N 235
D1W S783024N 235
D1W S841824N 235
D1W S841830N 235
D1W S842418N 235
D1W S842430N 235
D1W S843018N 235
D1W S843024N 235
D1W T482430N 238
D1W T483024N 238
D1W T602430N 238
D1W T603024N 238
D1W T662430N 238
D1W T663024N 238
D1W T722430N 238
D1W T723024N 238
D1WB20 175
D1WB26 175
D1WB32 175
D1WB36 175
D1WB42 175
D1WC 175
D1WSG 196
D1WT218 152
D1WT224 152
D1WT324 152
D1WT424 152
D1WT518 152
D1WT524 152
D1WW11481824 152
D1WW11482418 152
D1WW12481824 152
D1WW12482418 152
D1WW124824L 152
D1WW124824R 152
D1WW13481824 152
D1WW13482418 152
D1WW134824L 152
D1WW134824R 152
D1WW34824 152
D1WW44824 152
D1WW54824L 152
D1WW54824R 152
D1WW64824L 152
D1WW64824R 152
D1WW74824L 152
D1WW74824R 152
D2H4824 246
D2H4836 246
pattern no. page
D2H4848 246
D2H5124P 246
D2H5136P 246
D2H5148P 246
D2P1 60
DB120C (L or R) 275
DB1BD48SL 244
DB1BD48SR 244
DB1C 18 (L or R) 10 275
DB1C 24 (L or R) 10 275
DB1C 30 (L or R) 10 275
DB1C18 (L or R) 275
DB1C24 (L or R) 275
DB1C30 (L or R) 275
DB1CL 24R 292
DB1CL24L 292
DB1CL24S 292
DB1F18SP 275
DB1F18TP 275
DB1F24SP 275
DB1F24TP 275
DB1F30SP 275
DB1F30TP 275
DB1LS15A 293
DB1LS18A 293
DB1LS24A 293
DB1LS30A 293
DB1LS36A 293
DB1LSP15 292
DB1LSP18 292
DB1LSP24 292
DB1LSP30 292
DB1LSP36 292
DB1LSS15 292
DB1LSS18 292
DB1LSS24 292
DB1LSS30 292
DB1LSS36 292
DB1PSP15 292
DB1PSP18 292
DB1PSP19 292
DB1PSP24 292
DB1PSP30 292
DB1PSP36 292
DB1PWS24 276
DB1PWS30 276
DB1PWS36 276
DB1PWS42 276
DB1PWS48 276
DB1PWSL 275
DB1PWSL10 276
DB1PWSLWH 276
DB1PWSP 275
DB1PWSPWH 276
DB1PWSR 275
DB1PWSR10 276
DB1PWSRWH 276
DB1S CR 293
DB1SWSL 283
DB1SWSP 283
DB1SWSR 283
DB1TB 293
DB1U18 189, 192
DB1WR54 275
DB1WR60 275
Dividends Horizon
304
pattern no. page
DB1WR66 275
DB1WR72 275
DB2CL24L 292
DB2CL24LS 292
DB2CL24R 292
DB2CL24RS 292
DBSCR 293
DBSMLH 283
DBSMRH 283
DBVDC (L or R) 276
DD1TEU24 293
DD1TEU30 293
DD2OD 36L 209
DD2OD 42L 209
DD2OD 48L 209
DD2OD 54L 209
DD2OD 60L 209
DD2OD 66L 209
DD2OD 72L 209
DD3 PS36 210
DD3 PS42 210
DD3 PS48 210
DD3 PS54 210
DD3 PS60 210
DD3 PS66 210
DD3 PS72 210
DDOCL110120(BB/WW/WS) 162
DDOCL11072(BB/WW/WS) 162
DDOCL21C120(BB/WW/WS) 162
DDOCL21C72(BB/WW/WS) 162
DDOOC110120 (BB/WW/WS) 164
DDOOC11072 (BB/WW/WS) 164
DDOOC21C120 (BB/WW/WS) 164
DDOOC21C72 (BB/WW/WS) 164
DDOTU110120(BB/WW/WS) 161
DDOTU11072(BB/WW/WS) 161
DDOTU21C120(BB/WW/WS) 161
DDOTU21C72(BB/WW/WS) 161
DE1 167, 168
DE1 FDP 159
DE12V BI56(L/R) 169
DE12V ERE56 172
DE1(2V) PCNPM 153
DE1(2V) PCWPM 153
DE12V RBI56 169
DE12VPA 167
DE18 B1NY1 173
DE18 BI144(L/R) 169
DE18 BI216(L/R) 169
DE18 BI288(L/R) 169
DE18 BI56 173
DE18 BI56(L/R) 169
DE18 CI144 170
DE18 CI288 172
DE18 ERE56 172
DE18 RBI144 169
DE18 RBI216 169
DE18 RBI288 170
DE18 RBI56 169
DE18 RBI56SF 173
DE1DATSHD 175
DE1DATSHDF 175
DE1DOR4 155
DE1DOR5 155
DE1DOR6 155
pattern no. page
DE1DR1 155
DE1DR12V 155
DE1DR1C 155
DE1DR2 155
DE1DR22V 155
DE1DR2C 155
DE1DR3 155
DE1DR32V 155
DE1DR3C 155
DE1DR4 155
DE1DR42V 155
DE1DR4C 155
DE1DR5 155
DE1DR5C 155
DE1DR6 155
DE1DR6C 155
DE1E B1NY1 173
DE1E BI144(L/R) 169
DE1E BI216(L/R) 169
DE1E BI288(L/R) 169
DE1E BI56 173
DE1E BI56(L/R) 169
DE1E CI144 170
DE1E CI288 172
DE1E ERE56 172
DE1E RBI144 169
DE1E RBI216 169
DE1E RBI288 170
DE1E RBI56 169
DE1E RBI56SF 173
DE(1E,18,1T,12V) PJ72WP 158
DE(1E,18,1T,12V) PM24 153
DE(1E,18,1T,12V) PM30 153
DE(1E,18,1T,12V) PM36 153
DE(1E,18,1T,12V) PM42 153
DE(1E,18,1T,12V) PM48 153
DE(1E,18,1T,12V) PM60 153
DE(1E,18,1T,12V) PMS24 153
DE(1E,18,1T,12V) PMS30 153
DE(1E,18,1T,12V) PMS36 153
DE(1E,18,1T,12V) PMS42 153
DE(1E,18,1T,12V) PMS48 153
DE(1E,18,1T,12V) PMS60 153
DE(1E,18,1T,12V,N) PJ18NP 154
DE(1E,18,1T,12V,N) PJ18WP 154
DE(1E,18,1T,12V,N) PJ24NP 154
DE(1E,18,1T,12V,N) PJ24WP 154
DE(1E,18,1T,12V,N) PJ30NP 154
DE(1E,18,1T,12V,N) PJ30WP 154
DE(1E,18,1T,12V,N) PJ36NP 154
DE(1E,18,1T,12V,N) PJ36WP 154
DE(1E,18,1T,12V,N) PJ42NP 154
DE(1E,18,1T,12V,N) PJ42WP 154
DE(1E,18,1T,12V,N) PJ48NP 154
DE(1E,18,1T,12V,N) PJ48WP 158, 168
DE(1E,18,1T,12V,N) PJ54 WP 154
DE(1E,18,1T,12V,N) PJ54WP 158, 168
DE(1E,18,1T,12V,N) PJ60 WP 154
DE(1E,18,1T,12V,N) PJ60WP 158, 168
DE(1E,18,1T,12V,N) PJ66 WP 154
DE(1E,18,1T,12V,N) PJ66WP 158
DE(1E,18,1T,12V,N) PJ72WP 154
DE(1E,18,1T,12V,N) PJ78 WP 154
DE(1E,18,1T,12V,N) PJ78WP 158
DE(1E,18,1T,12V,N) PJ84WP 154, 158
pattern no. page
DE(1E,18,1T,12V,N) PJ96WP 154
DE(1E,18,1T,N) PCNP 153
DE(1E,18,1T,N) PCWP 153
DE1(E,8,T,2V) PC21M 153, 167
DE1(E,8,T,2V) PJ15NP 154
DE1(E,8,T,2V) PJ15WP 154
DE1IPA 167
DE1SPA 167
DE1T B1NY1 173
DE1T BI144(L/R) 169
DE1T BI216(L/R) 169
DE1T BI288(L/R) 169
DE1T BI56 173
DE1T BI56(L/R) 169
DE1T CI144 170
DE1T CI288 172
DE1T ERE56 172
DE1T RBI144 169
DE1T RBI216 169
DE1T RBI288 169
DE1T RBI56 169
DE1T RBI56SF 173
DE1USB1H 157
DE1USB1V 157
DE1USB2H 157
DE1USB2V 157
DE1USB3H 157
DE1USB3V 157
DE1USB4H 157
DE1USB4V 157
DE1USB5H 157
DE1USB5V 157
DE1USB6H 157
DE1USB6V 157
DE1X ERE56 172
DE2 167, 168
DE2KC10 56, 156
DE2V CI144 170
DE4CL202120(BB/WW/WS) 162
DE4CL20272(BB/WW/WS) 162
DE4CL202H(BB/WW/WS) 162
DE4CL210120(BB/WW/WS) 162
DE4CL21072(BB/WW/WS) 162
DE4CL210H(BB/WW/WS) 162
DE4CL311120(BB/WW/WS) 162
DE4CL31172(BB/WW/WS) 162
DE4CL311H(BB/WW/WS) 162
DE4CL412120(BB/WW/WS) 163
DE4CL41272(BB/WW/WS) 163
DE4CL412H(BB/WW/WS) 163
DE4OC202120 (BB/WW/WS) 164
DE4OC20272 (BB/WW/WS) 164
DE4OC202H (BB/WW/WS) 164
DE4OC210120 (BB/WW/WS) 164
DE4OC21072 (BB/WW/WS) 164
DE4OC210H (BB/WW/WS) 164
DE4OC311120 (BB/WW/WS) 164
DE4OC31172 (BB/WW/WS) 164
DE4OC311H (BB/WW/WS) 164
DE4OC412120 (BB/WW/WS) 165
DE4OC41272 (BB/WW/WS) 165
DE4OC412H (BB/WW/WS) 165
DE4TU202120(BB/WW/WS) 161
DE4TU20272(BB/WW/WS) 161
DE4TU202H(BB/WW/WS) 161
pattern no. page
DE4TU210120(BB/WW/WS) 161
DE4TU21072(BB/WW/WS) 161
DE4TU210H(BB/WW/WS) 161
DE4TU311120(BB/WW/WS) 161
DE4TU31172(BB/WW/WS) 161
DE4TU311H(BB/WW/WS) 161
DE4TU412120(BB/WW/WS) 161
DE4TU41272(BB/WW/WS) 161
DE4TU412H(BB/WW/WS) 161
DE4WSME108 166
DE4WSME72 166
DE4WSMED108 166
DE4WSMED72 166
DE6 D FD P 160
DE6 D VPM 160
DE6 FDPF 159
DENBI144(L/R) 169
DENBI156(L/R) 169
DENBI216(L/R) 169
DENBI288(L/R) 169
DENBI56(L/R) 169
DENCI144 170
DENPM241 153
DENPM242 153
DENPM301 153
DENPM302 153
DENPM361 153
DENPM362 153
DENPM421 153
DENPM422 153
DENPM481 153
DENPM482 153
DENRBI144 169
DENRBI156 169
DENRBI216 169
DENRBI288 169
DENRBI56 169
DEODRA 156
DEODRB 156
DEODRC 156
DEODRX 156
DFFCUS 73
DFFELS 73
DFFERS 73
DFFEUD 73
DFFEUS 73
DFFSSS 73
DL3TC 193
DL4L17 193
DL4L31 193
DL4L44 193
DL4L58 193
DP 74, 75, 101, 102, 107, 108, 109
DP1 59
DP1 CG 112
DP1 CHB 112
DP1 CHP 112
DP1 TKC 175
DP1 VWG 175
DP1AR0714E 90
DP1AR0714H 86
DP1AR0714W 88
DP1AR0715E 90
DP1AR0715H 86
DP1AR0715W 88
Dividends Horizon
305
pattern no. page
DP1AR0717E 90
DP1AR0717H 86
DP1AR0717W 88
DP1AR0718E 90
DP1AR0718H 86
DP1AR0718W 88
DP1AR0723E 90
DP1AR0723H 86
DP1AR0723W 88
DP1AR0724E 90
DP1AR0724H 86
DP1AR0724W 88
DP1AR0729E 90
DP1AR0729H 86
DP1AR0729W 88
DP1AR0730E 90
DP1AR0730H 86
DP1AR0730W 88
DP1AR0735E 90
DP1AR0735H 86
DP1AR0735W 88
DP1AR0736E 90
DP1AR0736H 86
DP1AR0736W 88
DP1AR0741E 90
DP1AR0741H 86
DP1AR0741W 88
DP1AR0742E 90
DP1AR0742H 86
DP1AR0742W 88
DP1AR0747E 90
DP1AR0747H 86
DP1AR0747W 88
DP1AR0748E 90
DP1AR0748H 86
DP1AR0748W 88
DP1AR0750E 146
DP1AR0750H 142
DP1AR0750W 144
DP1AR0751E 146
DP1AR0751H 142
DP1AR0751W 144
DP1AR0753E 90
DP1AR0753H 86
DP1AR0753W 88
DP1AR0754E 90
DP1AR0754H 86
DP1AR0754W 88
DP1AR0756E 146
DP1AR0756H 142
DP1AR0756W 144
DP1AR0757E 146
DP1AR0757H 142
DP1AR0757W 144
DP1AR0759E 90
DP1AR0759H 86
DP1AR0759W 88
DP1AR0760E 90
DP1AR0760H 86
DP1AR0760W 88
DP1AR0762E 146
DP1AR0762H 142
DP1AR0762W 144
DP1AR0763E 146
DP1AR0763H 142
pattern no. page
DP1AR0763W 144
DP1AR0765E 90
DP1AR0765H 86
DP1AR0765W 88
DP1AR0766E 90
DP1AR0766H 86
DP1AR0766W 88
DP1AR0768E 146
DP1AR0768H 142
DP1AR0768W 144
DP1AR0769E 146
DP1AR0769H 142
DP1AR0769W 144
DP1AR0771E 90
DP1AR0771H 86
DP1AR0771W 88
DP1AR0772E 90
DP1AR0772H 86
DP1AR0772W 88
DP1AR0774E 146
DP1AR0774H 142
DP1AR0774W 144
DP1AR0775E 146
DP1AR0775H 142
DP1AR0775W 144
DP1AR0777E 90
DP1AR0777H 86
DP1AR0777W 88
DP1AR0778E 90
DP1AR0778H 86
DP1AR0778W 88
DP1AR0780E 146
DP1AR0780H 142
DP1AR0780W 144
DP1AR0781E 146
DP1AR0781H 142
DP1AR0781W 144
DP1AR0783E 90
DP1AR0783H 86
DP1AR0783W 88
DP1AR0784E 90
DP1AR0784H 86
DP1AR0784W 88
DP1AR0786E 146
DP1AR0786H 142
DP1AR0786W 144
DP1AR0787E 146
DP1AR0787H 142
DP1AR0787W 144
DP1AR0789E 90
DP1AR0789H 86
DP1AR0789W 88
DP1AR0790E 90
DP1AR0790H 86
DP1AR0790W 88
DP1AR0792E 146
DP1AR0792H 142
DP1AR0792W 144
DP1AR0793E 146
DP1AR0793H 142
DP1AR0793W 144
DP1AR0795E 90
DP1AR0795H 86
DP1AR0795W 88
DP1AR0796E 90
pattern no. page
DP1AR0796H 86
DP1AR0796W 88
DP1AR0798E 146
DP1AR0798H 142
DP1AR0798W 144
DP1AR0799E 146
DP1AR0799H 142
DP1AR0799W 144
DP1AR1414E 91
DP1AR1414H 87
DP1AR1414W 89
DP1AR1415E 91
DP1AR1415H 87
DP1AR1415W 89
DP1AR1417E 91
DP1AR1417H 87
DP1AR1417W 89
DP1AR1418E 91
DP1AR1418H 87
DP1AR1418W 89
DP1AR1423E 91
DP1AR1423H 87
DP1AR1423W 89
DP1AR1424E 91
DP1AR1424H 87
DP1AR1424W 89
DP1AR1429E 91
DP1AR1429H 87
DP1AR1429W 89
DP1AR1430E 91
DP1AR1430H 87
DP1AR1430W 89
DP1AR1435E 91
DP1AR1435H 87
DP1AR1435W 89
DP1AR1436E 91
DP1AR1436H 87
DP1AR1436W 89
DP1AR1441E 91
DP1AR1441H 87
DP1AR1441W 89
DP1AR1442E 91
DP1AR1442H 87
DP1AR1442W 89
DP1AR1447E 91
DP1AR1447H 87
DP1AR1447W 89
DP1AR1448E 91
DP1AR1448H 87
DP1AR1448W 89
DP1AR1450E 147
DP1AR1450H 143
DP1AR1450W 145
DP1AR1451E 147
DP1AR1451H 143
DP1AR1451W 145
DP1AR1453E 91
DP1AR1453H 87
DP1AR1453W 89
DP1AR1454E 91
DP1AR1454H 87
DP1AR1454W 89
DP1AR1456E 147
DP1AR1456H 143
DP1AR1456W 145
pattern no. page
DP1AR1457E 147
DP1AR1457H 143
DP1AR1457W 145
DP1AR1459E 91
DP1AR1459H 87
DP1AR1459W 89
DP1AR1460E 91
DP1AR1460H 87
DP1AR1460W 89
DP1AR1462E 147
DP1AR1462H 143
DP1AR1462W 145
DP1AR1463E 147
DP1AR1463H 143
DP1AR1463W 145
DP1AR1465E 91
DP1AR1465H 87
DP1AR1465W 89
DP1AR1466E 91
DP1AR1466H 87
DP1AR1466W 89
DP1AR1468E 147
DP1AR1468H 143
DP1AR1468W 145
DP1AR1469E 147
DP1AR1469H 143
DP1AR1469W 145
DP1AR1471E 91
DP1AR1471H 87
DP1AR1471W 89
DP1AR1472E 91
DP1AR1472H 87
DP1AR1472W 89
DP1AR1474E 147
DP1AR1474H 143
DP1AR1474W 145
DP1AR1475E 147
DP1AR1475H 143
DP1AR1475W 145
DP1AR1477E 91
DP1AR1477H 87
DP1AR1477W 89
DP1AR1478E 91
DP1AR1478H 87
DP1AR1478W 89
DP1AR1480E 147
DP1AR1480H 143
DP1AR1480W 145
DP1AR1481E 147
DP1AR1481H 143
DP1AR1481W 145
DP1AR1483E 91
DP1AR1483H 87
DP1AR1483W 89
DP1AR1484E 91
DP1AR1484H 87
DP1AR1484W 89
DP1AR1486E 147
DP1AR1486H 143
DP1AR1486W 145
DP1AR1487E 147
DP1AR1487H 143
DP1AR1487W 145
DP1AR1489E 91
DP1AR1489H 87
Dividends Horizon
306
pattern no. page
DP1AR1489W 89
DP1AR1490E 91
DP1AR1490H 87
DP1AR1490W 89
DP1AR1492E 147
DP1AR1492H 143
DP1AR1492W 145
DP1AR1493E 147
DP1AR1493H 143
DP1AR1493W 145
DP1AR1495E 91
DP1AR1495H 87
DP1AR1495W 89
DP1AR1496E 91
DP1AR1496H 87
DP1AR1496W 89
DP1AR1498E 147
DP1AR1498H 143
DP1AR1498W 145
DP1AR1499E 147
DP1AR1499H 143
DP1AR1499W 145
DP1AR2114E 92
DP1AR2115E 92
DP1AR2117E 92
DP1AR2118E 92
DP1AR2123E 92
DP1AR2124E 92
DP1AR2129E 92
DP1AR2130E 92
DP1AR2135E 92
DP1AR2136E 92
DP1AR2141E 92
DP1AR2142E 92
DP1AR2147E 92
DP1AR2148E 92
DP1AR2150E 148
DP1AR2151E 148
DP1AR2153E 92
DP1AR2154E 92
DP1AR2156E 148
DP1AR2157E 148
DP1AR2159E 92
DP1AR2160E 92
DP1AR2162E 148
DP1AR2163E 148
DP1AR2165E 92
DP1AR2166E 92
DP1AR2168E 148
DP1AR2169E 148
DP1AR2171E 92
DP1AR2172E 92
DP1AR2174E 148
DP1AR2175E 148
DP1AR2177E 92
DP1AR2178E 92
DP1AR2180E 148
DP1AR2181E 148
DP1AR2183E 92
DP1AR2184E 92
DP1AR2186E 148
DP1AR2187E 148
DP1AR2189E 92
DP1AR2190E 92
DP1AR2192E 148
pattern no. page
DP1AR2193E 148
DP1AR2195E 92
DP1AR2196E 92
DP1AR2198E 148
DP1AR2199E 148
DP1AU0714 84
DP1AU0715 84
DP1AU0717 84
DP1AU0718 84
DP1AU0723 84
DP1AU0724 84
DP1AU0729 84
DP1AU0730 84
DP1AU0735 84
DP1AU0736 84
DP1AU0741 84
DP1AU0742 84
DP1AU0747 84
DP1AU0748 84
DP1AU0750 140
DP1AU0751 140
DP1AU0753 84
DP1AU0754 84
DP1AU0756 140
DP1AU0757 140
DP1AU0759 84
DP1AU0760 84
DP1AU0762 140
DP1AU0763 140
DP1AU0765 84
DP1AU0766 84
DP1AU0768 140
DP1AU0769 140
DP1AU0771 84
DP1AU0772 84
DP1AU0774 140
DP1AU0775 140
DP1AU0777 84
DP1AU0778 84
DP1AU0780 140
DP1AU0781 140
DP1AU0783 84
DP1AU0784 84
DP1AU0786 140
DP1AU0787 140
DP1AU0789 84
DP1AU0790 84
DP1AU0792 140
DP1AU0793 140
DP1AU0795 84
DP1AU0796 84
DP1AU0798 140
DP1AU0799 140
DP1AU1414 85
DP1AU1415 85
DP1AU1417 85
DP1AU1418 85
DP1AU1423 85
DP1AU1424 85
DP1AU1429 85
DP1AU1430 85
DP1AU1435 85
DP1AU1436 85
DP1AU1441 85
DP1AU1442 85
pattern no. page
DP1AU1447 85
DP1AU1448 85
DP1AU1450 141
DP1AU1451 141
DP1AU1453 85
DP1AU1454 85
DP1AU1456 141
DP1AU1457 141
DP1AU1459 85
DP1AU1460 85
DP1AU1462 141
DP1AU1463 141
DP1AU1465 85
DP1AU1466 85
DP1AU1468 141
DP1AU1469 141
DP1AU1471 85
DP1AU1472 85
DP1AU1474 141
DP1AU1475 141
DP1AU1477 85
DP1AU1478 85
DP1AU1480 141
DP1AU1481 141
DP1AU1483 85
DP1AU1484 85
DP1AU1486 141
DP1AU1487 141
DP1AU1489 85
DP1AU1490 85
DP1AU1492 141
DP1AU1493 141
DP1AU1495 85
DP1AU1496 85
DP1AU1498 141
DP1AU1499 141
DP1AUACE 125
DP1AUACH 125
DP1AUACW 125
DP1AUECTP 85, 141
DP1BCT18 176
DP1BCT24 176
DP1BCT30 176
DP1BCT36 176
DP1BCT42 176
DP1BCT48 176
DP1BCT60 176
DP1MBT24 62
DP1MBT30 62
DP1MBT36 62
DP1MBT42 62
DP1MBT48 62
DP1PT3 109
DP1PT4 109
DP1SO0818 55
DP1SO0824 55
DP1SO0830 55
DP1SO0836 55
DP1SO0842 55
DP1SO0848 55
DP1SO0860 55
DP1SO1015 50
DP1SO1018 50
DP1SO1018F 55
DP1SO1024 50
pattern no. page
DP1SO1024F 55
DP1SO1030 50
DP1SO1030F 55
DP1SO1036 50
DP1SO1036F 55
DP1SO1042 50
DP1SO1042F 55
DP1SO1048 50
DP1SO1048F 55
DP1SO1060 50
DP1SO1060F 55
DP1SO1415 50
DP1SO1418 50
DP1SO1424 50
DP1SO1430 50
DP1SO1436 50
DP1SO1442 50
DP1SO1448 50
DP1SO1460 50
DP1SO2115 51
DP1SO2118 51
DP1SO2124 51
DP1SO2130 51
DP1SO2136 51
DP1SO2142 51
DP1SO2148 51
DP1SO2160 51
DP1SO2418 55
DP1SO2424 55
DP1SO2430 55
DP1SO2436 55
DP1SO2442 55
DP1SO2448 55
DP1SO2460 55
DP1SO2815 43, 51, 128
DP1SO2815CCF 132
DP1SO2818 43, 51, 128
DP1SO2818CCF 132
DP1SO2824 43, 51, 128
DP1SO2824CCF 132
DP1SO2830 43, 51, 128
DP1SO2830CCF 132
DP1SO2830EPEF 136
DP1SO2836 43, 51, 128
DP1SO2836CCF 132
DP1SO2836EPEF 136
DP1SO2842 43, 51, 128
DP1SO2842CCF 132
DP1SO2848 43, 51, 128
DP1SO2848CCF 132
DP1SO2848EPEF 136
DP1SO2860 43, 51, 128
DP1SO2860CCF 132
DP1SO2860EPEF 136
DP1SO2872RR* 43
DP1SO2884RR* 43
DP1SO2896RR* 43
DP1SO4215 43, 128
DP1SO4215CCF 132
DP1SO4218 43, 128
DP1SO4218CCF 132
DP1SO4224 43, 128
DP1SO4224CCF 132
DP1SO4230 43, 128
DP1SO4230CCF 132
Dividends Horizon
307
pattern no. page
DP1SO4230EPEF 136
DP1SO4236 43, 128
DP1SO4236CCF 132
DP1SO4236EPEF 136
DP1SO4242 43, 128
DP1SO4242CCF 132
DP1SO4248 43, 128
DP1SO4248CCF 132
DP1SO4248EPEF 136
DP1SO4260 43, 128
DP1SO4260CCF 132
DP1SO4260EPEF 136
DP1SO4272RR* 43
DP1SO4284RR* 43
DP1SO4296RR* 43
DP1SO5015 44, 129
DP1SO5015CCF 133
DP1SO5018 44, 129
DP1SO5018CCF 133
DP1SO5024 44, 129
DP1SO5024CCF 133
DP1SO5030 44, 129
DP1SO5030CCF 133
DP1SO5030EPEF 137
DP1SO5036 44, 129
DP1SO5036CCF 133
DP1SO5036EPEF 137
DP1SO5042 44, 129
DP1SO5042CCF 133
DP1SO5048 44, 129
DP1SO5048CCF 133
DP1SO5048EPEF 137
DP1SO5060 44, 129
DP1SO5060CCF 133
DP1SO5060EPEF 137
DP1SO5072RR* 44
DP1SO5084RR* 44
DP1SO5096RR* 44
DP1SO5715 45, 129
DP1SO5715CCF 133
DP1SO5718 45, 129
DP1SO5718CCF 133
DP1SO5724 45, 129
DP1SO5724CCF 133
DP1SO5730 45, 129
DP1SO5730CCF 133
DP1SO5730EPEF 137
DP1SO5736 45, 129
DP1SO5736CCF 133
DP1SO5736EPEF 137
DP1SO5742 45, 129
DP1SO5742CCF 133
DP1SO5748 45, 129
DP1SO5748CCF 133
DP1SO5748EPEF 137
DP1SO5760 45, 129
DP1SO5760CCF 133
DP1SO5760EPEF 137
DP1SO6415 45, 129
DP1SO6415CCF 133
DP1SO6418 45, 129
DP1SO6418CCF 133
DP1SO6424 45, 129
DP1SO6424CCF 133
DP1SO6430 45, 129
pattern no. page
DP1SO6430CCF 133
DP1SO6430EPEF 137
DP1SO6436 45, 129
DP1SO6436CCF 133
DP1SO6436EPEF 137
DP1SO6442 45, 129
DP1SO6442CCF 133
DP1SO6448 45, 129
DP1SO6448CCF 133
DP1SO6448EPEF 137
DP1SO6460 45, 129
DP1SO6460CCF 133
DP1SO715 50
DP1SO718 50
DP1SO724 50
DP1SO730 50
DP1SO736 50
DP1SO742 50
DP1SO748 50
DP1SO760 50
DP1SO7815 45
DP1SO7818 45
DP1SO7824 45
DP1SO7830 45
DP1SO7836 45
DP1SO7842 45
DP1SO7848 45
DP1SOS15 52
DP1SOS18 52
DP1SOS24 52
DP1SOS30 52
DP1SOS36 52
DP1SOS42 52
DP1SOS48 52
DP1SOS60 52
DP1SOWH15 43, 128
DP1SOWH15CCF 132
DP1SOWH18 43, 128
DP1SOWH18CCF 132
DP1SOWH24 43, 128
DP1SOWH24CCF 132
DP1SOWH30 43, 128
DP1SOWH30CCF 132
DP1SOWH30EPEF 136
DP1SOWH36 43, 128
DP1SOWH36CCF 132
DP1SOWH36EPEF 136
DP1SOWH42 43, 128
DP1SOWH42CCF 132
DP1SOWH48 43, 128
DP1SOWH48CCF 132
DP1SOWH48EPEF 136
DP1SOWH60 43, 128
DP1SOWH60CCF 132
DP1SOWH60EPEF 136
DP1SOWH72RR* 43
DP1SOWH84RR* 43
DP1SOWH96RR* 43
DP1SW0724 72
DP1SW0730 72
DP1SW0736 72
DP1SW0742 72
DP1SW0748 72
DP1SW1424 72
DP1SW1430 72
pattern no. page
DP1SW1436 72
DP1SW1442 72
DP1SW1448 72
DP1SW2124 72
DP1SW2130 72
DP1SW2136 72
DP1SW2142 72
DP1SW2148 72
DP1SW2824 72
DP1SW2830 72
DP1SW2836 72
DP1SW2842 72
DP1SW2848 72
DP1WT57 110
DP1WT64 110
DP1WT71 110
DP1WT78 110
DP1WTBTC15 110
DP1WTBTC18 110
DP1WTBTC24 110
DP1WTBTC30 110
DP1WTBTC36 110
DP1WTBTC42 110
DP1WTBTC48 110
DP1WTET57 110
DP1WTET64 110
DP1WTET71 110
DP1WTET78 110
DP1WTTC15 110
DP1WTTC18 110
DP1WTTC24 110
DP1WTTC30 110
DP1WTTC36 110
DP1WTTC42 110
DP1WTTC48 110
DP1WTTC54 110
DP1WTTC60 110
DP1WTTC66 110
DP1WTTC72 110
DP1WTTC78 110
DP1WTTC84 110
DP1WTTC90 110
DP1WTTC96 110
DP1WTTSB 111
DP2 STFL1418 41
DP2 STFL1424 41
DP2 STFL1430 41
DP2 STFL1436 41
DP2 STFL1442 41
DP2 STFL1448 41
DP2CHTP 112
DP2PMS36 109
DP2PMS42 109
DP2PMS50 109
DP2PMS57 109
DP2PMS64 109
DP2PMS78 109
DP2PRFIC15 112
DP2PRFN15 112
DP2PRFW15 112
DP2SOS15 52
DP2SOS18 52
DP2SOS24 52
DP2SOS30 52
DP2SOS36 52
pattern no. page
DP2SOS42 52
DP2SOS48 52
DP2SOS60 52
DP2SOSC 52
DP2STF 2118 41
DP2STF 2124 41
DP2STF 2130 41
DP2STF 2136 41
DP2STF 2142 41
DP2STF 2148 41
DP2S(T/N)F 1418 41
DP2S(T/N)F 1424 41
DP2S(T/N)F 1430 41
DP2S(T/N)F 1436 41
DP2S(T/N)F 1442 41
DP2S(T/N)F 1448 41
DP2S(T/N)F 2818 41
DP2S(T/N)F 2824 41
DP2S(T/N)F 2830 41
DP2S(T/N)F 2836 41
DP2S(T/N)F 2842 41
DP2S(T/N)F 2848 41
DP3ESB 57, 69, 70, 71
DP3L10715 53
DP3L10718 53
DP3L10724 53
DP3L10730 53
DP3L10736 53
DP3L10742 53
DP3L10748 53
DP3L11015 53
DP3L11018 53
DP3L11024 53
DP3L11030 53
DP3L11036 53
DP3L11042 53
DP3L11048 53
DP3L11415 53
DP3L11415F 54
DP3L11418 53
DP3L11418F 54
DP3L11424 53
DP3L11424F 54
DP3L11430 53
DP3L11430F 54
DP3L11436 53
DP3L11436F 54
DP3L11442 53
DP3L11442F 54
DP3L11448 53
DP3L11448F 54
DP3L12115 53
DP3L12118 53
DP3L12124 53
DP3L12130 53
DP3L12136 53
DP3L12142 53
DP3L12148 53
DP3L12415 58
DP3L12415F 58
DP3L12418 58
DP3L12418F 58
DP3L12424 58
DP3L12424F 58
DP3L12430 58
Dividends Horizon
308
pattern no. page
DP3L12430F 58
DP3L12436 58
DP3L12436F 58
DP3L12442 58
DP3L12442F 58
DP3L12448 58
DP3L12448F 58
DP3L12815 46, 53, 130
DP3L12815CCF 134
DP3L12815F 47, 54
DP3L12818 46, 53, 130
DP3L12818CCF 134
DP3L12818F 47, 54
DP3L12824 46, 53, 130
DP3L12824CCF 134
DP3L12824F 47, 54
DP3L12830 46, 53, 130
DP3L12830CCF 134
DP3L12830EPEF 138
DP3L12830F 47, 54
DP3L12836 46, 53, 130
DP3L12836CCF 134
DP3L12836EPEF 138
DP3L12836F 47, 54
DP3L12842 46, 53, 130
DP3L12842CCF 134
DP3L12842F 47, 54
DP3L12848 46, 53, 130
DP3L12848CCF 134
DP3L12848EPEF 138
DP3L12848F 47, 54
DP3L12860EPEF 138
DP3L12872EPEF 138
DP3L12884EPEF 138
DP3L14215 46, 130
DP3L14215CCF 134
DP3L14215F 47
DP3L14218 46, 130
DP3L14218CCF 134
DP3L14218F 47
DP3L14224 46, 130
DP3L14224CCF 134
DP3L14224F 47
DP3L14230 46, 130
DP3L14230CCF 134
DP3L14230EPEF 138
DP3L14230F 47
DP3L14236 46, 130
DP3L14236CCF 134
DP3L14236EPEF 138
DP3L14236F 47
DP3L14242 46, 130
DP3L14242CCF 134
DP3L14242F 47
DP3L14248 46, 130
DP3L14248CCF 134
DP3L14248EPEF 138
DP3L14248F 47
DP3L14260EPEF 138
DP3L14272EPEF 138
DP3L14284EPEF 138
DP3L15015 48, 131
DP3L15015CCF 135
DP3L15015F 49
DP3L15018 48, 131
pattern no. page
DP3L15018CCF 135
DP3L15018F 49
DP3L15024 48, 131
DP3L15024CCF 135
DP3L15024F 49
DP3L15030 48, 131
DP3L15030CCF 135
DP3L15030EPEF 139
DP3L15030F 49
DP3L15036 48, 131
DP3L15036CCF 135
DP3L15036EPEF 139
DP3L15036F 49
DP3L15042 48, 131
DP3L15042CCF 135
DP3L15042F 49
DP3L15048 48, 131
DP3L15048CCF 135
DP3L15048EPEF 139
DP3L15048F 49
DP3L15060EPEF 139
DP3L15072EPEF 139
DP3L15084EPEF 139
DP3L15715 48, 131
DP3L15715CCF 135
DP3L15715F 49
DP3L15718 48, 131
DP3L15718CCF 135
DP3L15718F 49
DP3L15724 48, 131
DP3L15724CCF 135
DP3L15724F 49
DP3L15730 48, 131
DP3L15730CCF 135
DP3L15730EPEF 139
DP3L15730F 49
DP3L15736 48, 131
DP3L15736CCF 135
DP3L15736EPEF 139
DP3L15736F 49
DP3L15742 48, 131
DP3L15742CCF 135
DP3L15742F 49
DP3L15748 48, 131
DP3L15748CCF 135
DP3L15748EPEF 139
DP3L15748F 49
DP3L15760EPEF 139
DP3L15772EPEF 139
DP3L15784EPEF 139
DP3L1WH15 46, 130
DP3L1WH15CCF 134
DP3L1WH15F 47
DP3L1WH18 46, 130
DP3L1WH18CCF 134
DP3L1WH18F 47
DP3L1WH24 46, 130
DP3L1WH24CCF 134
DP3L1WH24F 47
DP3L1WH30 46, 130
DP3L1WH30CCF 134
DP3L1WH30EPEF 138
DP3L1WH30F 47
DP3L1WH36 46, 130
DP3L1WH36CCF 134
pattern no. page
DP3L1WH36EPEF 138
DP3L1WH36F 47
DP3L1WH42 46, 130
DP3L1WH42CCF 134
DP3L1WH42F 47
DP3L1WH48 46, 130
DP3L1WH48CCF 134
DP3L1WH48EPEF 138
DP3L1WH48F 47
DP3L1WH60EPEF 138
DP3L1WH72EPEF 138
DP3L1WH84EPEF 138
DP3MB 61, 62
DP3PSB 57, 66, 67, 68
DP3PWS14 109
DP3PWS21 109
DP3PWS28 109
DP3PWS36 109
DP3PWS42 109
DP3PWS50 109
DP3PWS57 109
DP3PWS64 109
DP3PWS71 109
DP3PWS78 109
DP3SS 57, 63, 64, 65
DP5(C/V/U)PT29CP 127
DP5(C/V/U)PT30CP 127
DP5(C/V/U)PT35CP 127
DP5(C/V/U)PT36CP 127
DP5(C/V/U)PT47CP 127
DP5(C/V/U)PT48CP 127
DP5(C/V/U)PT59CP 127
DP5(C/V/U)PT60CP 127
DP5(C/V/U)PT71CP 127
DP5(C/V/U)PT72CP 127
DP5(C/V/U)PT83CP 127
DP5(C/V/U)PT84CP 127
DP5(C/V/U)PT95CP 127
DP5(C/V/U)PT96CP 127
DP5PEG36F 101
DP5PEG42 101
DP5PEG50 101
DP5PEG57 101
DP5PEG78 101
DP5PEGG08 104
DP5PEGG14 104
DP5PEGG22 104
DP5PEGG28 104
DP5PEGG36 104
DP5PEGG42H 104
DP5PEGGWH36 104
DP5PEGGWH42 104
DP5PEGGWH50 104
DP5PEGGWH57 104
DP5PEGGWH64 104
DP5PEGGWH78 104
DP5PEGN08 103
DP5PEGN14 103
DP5PEGN22 103
DP5PEGN28 103
DP5PEGN36 103
DP5PEGN42H 103
DP5PEGNWH36 103
DP5PEGNWH42 103
DP5PEGNWH50 103
pattern no. page
DP5PEGNWH57 103
DP5PEGNWH64 103
DP5PEGNWH78 103
DP5PEGWH 101
DP5PEGWHS14 101
DP5PEGWHS21 101
DP5PEGWHS28 101
DP5PENG08 105
DP5PENG14 105
DP5PENG22 105
DP5PENG28 105
DP5PENG42H 105
DP5PENGG36 105
DP5PENGWH36 105
DP5PENGWH42 105
DP5PENGWH50 105
DP5PENGWH57 105
DP5PENGWH64 105
DP5PENGWH78 105
DP5PG64 101
DP6PE08 106
DP6PE14 106
DP6PE22 106
DP6PE28 106
DP6PE36 106
DP6PE36F 106
DP6PE42 106
DP6PE42H 106
DP6PE50 106
DP6PE57 106
DP6PE64 106
DP6PE78 106
DP6PEWH 106
DP6PEWH36 106
DP6PEWH42 106
DP6PEWH50 106
DP6PEWH57 106
DP6PEWH64 106
DP6PEWH78 106
DP6PEWHS14 106
DP6PEWHS21 106
DP6PEWHS28 106
DP71RCT18 176
DP71RCT24 176
DP71RCT30 176
DP71RCT36 176
DP71RCT42 176
DP71RCT48 176
DP71RCT60 176
DP72RCT18 176
DP72RCT24 176
DP72RCT30 176
DP72RCT36 176
DP72RCT42 176
DP72RCT48 176
DP72RCT60 176
DP7BF 98
DP7CERK 173
DP7HIRKD24 174
DP7HIRKD30 174
DP7HIRKD36 174
DP7HIRKD42 174
DP7HIRKD48 174
DP7HIRKD60 174
DP7HIRKS24 174
Dividends Horizon
309
pattern no. page
DP7HIRKS30 174
DP7HIRKS36 174
DP7HIRKS42 174
DP7HIRKS48 174
DP7HIRKS60 174
DP7HLCWH 97
DP7HRRKD24 174
DP7HRRKD30 174
DP7HRRKD36 174
DP7HRRKD42 174
DP7HRRKD48 174
DP7HRRKD60 174
DP7HRRKS24 174
DP7HRRKS30 174
DP7HRRKS36 174
DP7HRRKS42 174
DP7HRRKS48 174
DP7HRRKS60 174
DP7PP36S 171
DP7PP36T 171
DP7PP42S 171
DP7PP42T 171
DP7PP50S 171
DP7PP50T 171
DP7PP57S 171
DP7PP57T 171
DP7PP64S 171
DP7PP64T 171
DP7PP78S 171
DP7PP78T 171
DP7RCCH24 174
DP7RCCH30 174
DP7RCCH36 174
DP7RCCH42 174
DP7RCCH48 174
DP7RCCH60 174
DP7S 77, 78, 79, 80
DP7SS 81, 83
DP7SWTFK24 76
DP7SWTFK30 76
DP7SWTFK36 76
DP7SWTFK42 76
DP7SWTFK48 76
DP7SWTFKD 76
DP8 37, 38, 39
DP8120PC08S 151
DP8120PC14S 151
DP8120PC22S 151
DP8120PC28S 151
DP8120PC36S 151
DP8120PC36SF 151
DP8120PC42S 151
DP8120PC42SH 151
DP8120PC50S 151
DP8120PC57S 151
DP8120PC64S 151
DP8120PC78S 151
DP8120PO36 151
DP8120PO42 151
DP8120PO50 151
DP8120PO57 151
DP8120PO64 151
DP8120PO78 151
DP8120SPO 14 150
DP8120SPO 21 150
pattern no. page
DP8120SPO 28 150
DP8BC18K 55
DP8BC24K 55
DP8BC30K 55
DP8BC36K 55
DP8BC42K 55
DP8BC48K 55
DP8BC60K 55
DP8CBBFR4218 34
DP8CBBFR4224 34
DP8CBBFR4230 34
DP8CBBFR4236 34
DP8CBBFR4242 34
DP8CBBFR4248 34
DP8CBBFR4260 34
DP8CBBFR5018 34
DP8CBBFR5024 34
DP8CBBFR5030 34
DP8CBBFR5036 34
DP8CBBFR5042 34
DP8CBBFR5048 34
DP8CBBFR5060 34
DP8CBBFR5718 35
DP8CBBFR5724 35
DP8CBBFR5730 35
DP8CBBFR5736 35
DP8CBBFR5742 35
DP8CBBFR5748 35
DP8CBBFR5760 35
DP8CBBFR6418 35
DP8CBBFR6424 35
DP8CBBFR6430 35
DP8CBBFR6436 35
DP8CBBFR6442 35
DP8CBBFR6448 35
DP8CBBFR6460 35
DP8CBBFR7818 36
DP8CBBFR7824 36
DP8CBBFR7830 36
DP8CBBFR7836 36
DP8CBBFR7842 36
DP8CBBFR7848 36
DP8CBBRR4218 32
DP8CBBRR4224 32
DP8CBBRR4230 32
DP8CBBRR4236 32
DP8CBBRR4242 32
DP8CBBRR4248 32
DP8CBBRR4260 32
DP8CBBRR5018 32
DP8CBBRR5024 32
DP8CBBRR5030 32
DP8CBBRR5036 32
DP8CBBRR5042 32
DP8CBBRR5048 32
DP8CBBRR5060 32
DP8CBBRR5718 33
DP8CBBRR5724 33
DP8CBBRR5730 33
DP8CBBRR5736 33
DP8CBBRR5742 33
DP8CBBRR5748 33
DP8CBBRR5760 33
DP8CBBRR6418 33
DP8CBBRR6424 33
pattern no. page
DP8CBBRR6430 33
DP8CBBRR6436 33
DP8CBBRR6442 33
DP8CBBRR6448 33
DP8CBBRR6460 33
DP8CBBRR7818 33
DP8CBBRR7824 33
DP8CBBRR7830 33
DP8CBBRR7836 33
DP8CBBRR7842 33
DP8CBBRR7848 33
DP8CMMFR3615 13
DP8CMMFR3618 13
DP8CMMFR3624 13
DP8CMMFR3630 13
DP8CMMFR3636 13
DP8CMMFR3642 13
DP8CMMFR3648 13
DP8CMMFR3660 13
DP8CMMFR4215 13
DP8CMMFR4218 13
DP8CMMFR4224 13
DP8CMMFR4230 13
DP8CMMFR4236 13
DP8CMMFR4242 13
DP8CMMFR4248 13
DP8CMMFR4260 13
DP8CMMFR5015 14
DP8CMMFR5018 14
DP8CMMFR5024 14
DP8CMMFR5030 14
DP8CMMFR5036 14
DP8CMMFR5042 14
DP8CMMFR5048 14
DP8CMMFR5060 14
DP8CMMFR5715 14
DP8CMMFR5718 14
DP8CMMFR5724 14
DP8CMMFR5730 14
DP8CMMFR5736 14
DP8CMMFR5742 14
DP8CMMFR5748 14
DP8CMMFR5760 14
DP8CMMFR6415 14
DP8CMMFR6418 14
DP8CMMFR6424 14
DP8CMMFR6430 14
DP8CMMFR6436 14
DP8CMMFR6442 14
DP8CMMFR6448 14
DP8CMMFR6460 14
DP8CMMFR7815 15
DP8CMMFR7818 15
DP8CMMFR7824 15
DP8CMMFR7830 15
DP8CMMFR7836 15
DP8CMMFR7842 15
DP8CMMFR7848 15
DP8CMMFRWH15 13
DP8CMMFRWH18 13
DP8CMMFRWH24 13
DP8CMMFRWH30 13
DP8CMMFRWH36 13
DP8CMMFRWH42 13
DP8CMMFRWH48 13
pattern no. page
DP8CMMFRWH60 13
DP8CMMLL3618 11
DP8CMMLL3624 11
DP8CMMLL3630 11
DP8CMMLL3636 11
DP8CMMLL3642 11
DP8CMMLL3648 11
DP8CMMLL3660 11
DP8CMMLL4218 11
DP8CMMLL4224 11
DP8CMMLL4230 11
DP8CMMLL4236 11
DP8CMMLL4242 11
DP8CMMLL4248 11
DP8CMMLL4260 11
DP8CMMLL5018 11
DP8CMMLL5024 11
DP8CMMLL5030 11
DP8CMMLL5036 11
DP8CMMLL5042 11
DP8CMMLL5048 11
DP8CMMLL5060 11
DP8CMMLL5718 12
DP8CMMLL5724 12
DP8CMMLL5730 12
DP8CMMLL5736 12
DP8CMMLL5742 12
DP8CMMLL5748 12
DP8CMMLL5760 12
DP8CMMLL6418 12
DP8CMMLL6424 12
DP8CMMLL6430 12
DP8CMMLL6436 12
DP8CMMLL6442 12
DP8CMMLL6448 12
DP8CMMLL6460 12
DP8CMMLL7818 12
DP8CMMLL7824 12
DP8CMMLL7830 12
DP8CMMLL7836 12
DP8CMMLL7842 12
DP8CMMLL7848 12
DP8CMMLLWH18 11
DP8CMMLLWH24 11
DP8CMMLLWH30 11
DP8CMMLLWH36 11
DP8CMMLLWH42 11
DP8CMMLLWH48 11
DP8CMMLLWH60 11
DP8CMMRR3615 8
DP8CMMRR3618 8
DP8CMMRR3624 8
DP8CMMRR3630 8
DP8CMMRR3636 8
DP8CMMRR3642 8
DP8CMMRR3648 8
DP8CMMRR3660 8
DP8CMMRR3672RR* 8
DP8CMMRR3684RR* 8
DP8CMMRR3696RR* 8
DP8CMMRR4215 9
DP8CMMRR4218 9
DP8CMMRR4224 9
DP8CMMRR4230 9
DP8CMMRR4236 9
Dividends Horizon
310
pattern no. page
DP8CMMRR4242 9
DP8CMMRR4248 9
DP8CMMRR4260 9
DP8CMMRR4272RR* 9
DP8CMMRR4284RR* 9
DP8CMMRR4296RR* 9
DP8CMMRR5015 9
DP8CMMRR5018 9
DP8CMMRR5024 9
DP8CMMRR5030 9
DP8CMMRR5036 9
DP8CMMRR5042 9
DP8CMMRR5048 9
DP8CMMRR5060 9
DP8CMMRR5072RR* 9
DP8CMMRR5084RR* 9
DP8CMMRR5096RR* 9
DP8CMMRR5715 10
DP8CMMRR5718 10
DP8CMMRR5724 10
DP8CMMRR5730 10
DP8CMMRR5736 10
DP8CMMRR5742 10
DP8CMMRR5748 10
DP8CMMRR5760 10
DP8CMMRR6415 10
DP8CMMRR6418 10
DP8CMMRR6424 10
DP8CMMRR6430 10
DP8CMMRR6436 10
DP8CMMRR6442 10
DP8CMMRR6448 10
DP8CMMRR6460 10
DP8CMMRR7815 10
DP8CMMRR7818 10
DP8CMMRR7824 10
DP8CMMRR7830 10
DP8CMMRR7836 10
DP8CMMRR7842 10
DP8CMMRR7848 10
DP8CMMRRWH15 8
DP8CMMRRWH18 8
DP8CMMRRWH24 8
DP8CMMRRWH30 8
DP8CMMRRWH36 8
DP8CMMRRWH42 8
DP8CMMRRWH48 8
DP8CMMRRWH60 8
DP8CMMRRWH72RR* 8
DP8CMMRRWH84RR* 8
DP8CMMRRWH96RR* 8
DP8CPAG3625 94
DP8CPAG3635 94
DP8CPAG3645 94
DP8CPAG4225 94
DP8CPAG4235 94
DP8CPAG4245 94
DP8CPAG5025 94
DP8CPAG5035 94
DP8CPAG5045 94
DP8CPAG5725 94
DP8CPAG5735 94
DP8CPAG5745 94
DP8CPAG6425 94
DP8CPAG6435 94
pattern no. page
DP8CPAG6445 94
DP8CPAG7825 94
DP8CPAG7835 94
DP8CPAG7845 94
DP8CPAGWH25 94
DP8CPAGWH35 94
DP8CPAGWH45 94
DP8CPPFR4215 29
DP8CPPFR4218 29
DP8CPPFR4224 29
DP8CPPFR4230 29
DP8CPPFR4236 29
DP8CPPFR4242 29
DP8CPPFR4248 29
DP8CPPFR4260 29
DP8CPPFR5015 29
DP8CPPFR5018 29
DP8CPPFR5024 29
DP8CPPFR5030 29
DP8CPPFR5036 29
DP8CPPFR5042 29
DP8CPPFR5048 29
DP8CPPFR5060 29
DP8CPPFR5715 30
DP8CPPFR5718 30
DP8CPPFR5724 30
DP8CPPFR5730 30
DP8CPPFR5736 30
DP8CPPFR5742 30
DP8CPPFR5748 30
DP8CPPFR5760 30
DP8CPPFR6415 30
DP8CPPFR6418 30
DP8CPPFR6424 30
DP8CPPFR6430 30
DP8CPPFR6436 30
DP8CPPFR6442 30
DP8CPPFR6448 30
DP8CPPFR6460 30
DP8CPPFR7815 31
DP8CPPFR7818 31
DP8CPPFR7824 31
DP8CPPFR7830 31
DP8CPPFR7836 31
DP8CPPFR7842 31
DP8CPPFR7848 31
DP8CPPLL4218 26
DP8CPPLL4224 26
DP8CPPLL4230 26
DP8CPPLL4236 26
DP8CPPLL4242 26
DP8CPPLL4248 26
DP8CPPLL4260 26
DP8CPPLL5018 26
DP8CPPLL5024 26
DP8CPPLL5030 26
DP8CPPLL5036 26
DP8CPPLL5042 26
DP8CPPLL5048 26
DP8CPPLL5060 26
DP8CPPLL5718 27
DP8CPPLL5724 27
DP8CPPLL5730 27
DP8CPPLL5736 27
DP8CPPLL5742 27
pattern no. page
DP8CPPLL5748 27
DP8CPPLL5760 27
DP8CPPLL6418 27
DP8CPPLL6424 27
DP8CPPLL6430 27
DP8CPPLL6436 27
DP8CPPLL6442 27
DP8CPPLL6448 27
DP8CPPLL6460 27
DP8CPPLL7818 28
DP8CPPLL7824 28
DP8CPPLL7830 28
DP8CPPLL7836 28
DP8CPPLL7842 28
DP8CPPLL7848 28
DP8CPPRR4215 23
DP8CPPRR4218 23
DP8CPPRR4224 23
DP8CPPRR4230 23
DP8CPPRR4236 23
DP8CPPRR4242 23
DP8CPPRR4248 23
DP8CPPRR4260 23
DP8CPPRR5015 23
DP8CPPRR5018 23
DP8CPPRR5024 23
DP8CPPRR5030 23
DP8CPPRR5036 23
DP8CPPRR5042 23
DP8CPPRR5048 23
DP8CPPRR5060 23
DP8CPPRR5715 24
DP8CPPRR5718 24
DP8CPPRR5724 24
DP8CPPRR5730 24
DP8CPPRR5736 24
DP8CPPRR5742 24
DP8CPPRR5748 24
DP8CPPRR5760 24
DP8CPPRR6415 24
DP8CPPRR6418 24
DP8CPPRR6424 24
DP8CPPRR6430 24
DP8CPPRR6436 24
DP8CPPRR6442 24
DP8CPPRR6448 24
DP8CPPRR6460 24
DP8CPPRR7815 25
DP8CPPRR7818 25
DP8CPPRR7824 25
DP8CPPRR7830 25
DP8CPPRR7836 25
DP8CPPRR7842 25
DP8CPPRR7848 25
DP8CPTCPG5 126
DP8CPTCPHG5 126
DP8CPTG15 98
DP8CPTG25 98
DP8CPTG35 98
DP8CPTG45 98
DP8CPTGS5 98
DP8CTTFR3615 20
DP8CTTFR3618 20
DP8CTTFR3624 20
DP8CTTFR3630 20
pattern no. page
DP8CTTFR3636 20
DP8CTTFR3642 20
DP8CTTFR3648 20
DP8CTTFR3660 20
DP8CTTFR4215 20
DP8CTTFR4218 20
DP8CTTFR4224 20
DP8CTTFR4230 20
DP8CTTFR4236 20
DP8CTTFR4242 20
DP8CTTFR4248 20
DP8CTTFR4260 20
DP8CTTFR5015 21
DP8CTTFR5018 21
DP8CTTFR5024 21
DP8CTTFR5030 21
DP8CTTFR5036 21
DP8CTTFR5042 21
DP8CTTFR5048 21
DP8CTTFR5060 21
DP8CTTFR5715 21
DP8CTTFR5718 21
DP8CTTFR5724 21
DP8CTTFR5730 21
DP8CTTFR5736 21
DP8CTTFR5742 21
DP8CTTFR5748 21
DP8CTTFR5760 21
DP8CTTFR6415 22
DP8CTTFR6418 22
DP8CTTFR6424 22
DP8CTTFR6430 22
DP8CTTFR6436 22
DP8CTTFR6442 22
DP8CTTFR6448 22
DP8CTTFR6460 22
DP8CTTFR7815 22
DP8CTTFR7818 22
DP8CTTFR7824 22
DP8CTTFR7830 22
DP8CTTFR7836 22
DP8CTTFR7842 22
DP8CTTFR7848 22
DP8CTTLL3618 18
DP8CTTLL3624 18
DP8CTTLL3630 18
DP8CTTLL3636 18
DP8CTTLL3642 18
DP8CTTLL3648 18
DP8CTTLL3660 18
DP8CTTLL4218 18
DP8CTTLL4224 18
DP8CTTLL4230 18
DP8CTTLL4236 18
DP8CTTLL4242 18
DP8CTTLL4248 18
DP8CTTLL4260 18
DP8CTTLL5018 18
DP8CTTLL5024 18
DP8CTTLL5030 18
DP8CTTLL5036 18
DP8CTTLL5042 18
DP8CTTLL5048 18
DP8CTTLL5060 18
DP8CTTLL5718 19
Dividends Horizon
311
pattern no. page
DP8CTTLL5724 19
DP8CTTLL5730 19
DP8CTTLL5736 19
DP8CTTLL5742 19
DP8CTTLL5748 19
DP8CTTLL5760 19
DP8CTTLL6418 19
DP8CTTLL6424 19
DP8CTTLL6430 19
DP8CTTLL6436 19
DP8CTTLL6442 19
DP8CTTLL6448 19
DP8CTTLL6460 19
DP8CTTLL7818 19
DP8CTTLL7824 19
DP8CTTLL7830 19
DP8CTTLL7836 19
DP8CTTLL7842 19
DP8CTTLL7848 19
DP8CTTRR3615 16
DP8CTTRR3618 16
DP8CTTRR3624 16
DP8CTTRR3630 16
DP8CTTRR3636 16
DP8CTTRR3642 16
DP8CTTRR3648 16
DP8CTTRR3660 16
DP8CTTRR4215 16
DP8CTTRR4218 16
DP8CTTRR4224 16
DP8CTTRR4230 16
DP8CTTRR4236 16
DP8CTTRR4242 16
DP8CTTRR4248 16
DP8CTTRR4260 16
DP8CTTRR5015 16
DP8CTTRR5018 16
DP8CTTRR5024 16
DP8CTTRR5030 16
DP8CTTRR5036 16
DP8CTTRR5042 16
DP8CTTRR5048 16
DP8CTTRR5060 16
DP8CTTRR5715 17
DP8CTTRR5718 17
DP8CTTRR5724 17
DP8CTTRR5730 17
DP8CTTRR5736 17
DP8CTTRR5742 17
DP8CTTRR5748 17
DP8CTTRR5760 17
DP8CTTRR6415 17
DP8CTTRR6418 17
DP8CTTRR6424 17
DP8CTTRR6430 17
DP8CTTRR6436 17
DP8CTTRR6442 17
DP8CTTRR6448 17
DP8CTTRR6460 17
DP8CTTRR7815 17
DP8CTTRR7818 17
DP8CTTRR7824 17
DP8CTTRR7830 17
DP8CTTRR7836 17
DP8CTTRR7842 17
pattern no. page
DP8CTTRR7848 17
DP8(C/V/U)120PA362 149
DP8(C/V/U)120PA363 149
DP8(C/V/U)120PA422 149
DP8(C/V/U)120PA423 149
DP8(C/V/U)120PA502 149
DP8(C/V/U)120PA503 149
DP8(C/V/U)120PA572 149
DP8(C/V/U)120PA573 149
DP8(C/V/U)120PA642 149
DP8(C/V/U)120PA643 149
DP8(C/V/U)120PA782 149
DP8(C/V/U)120PA783 149
DP8(C/V/U)120PAG362 149
DP8(C/V/U)120PAG363 149
DP8(C/V/U)120PAG422 149
DP8(C/V/U)120PAG423 149
DP8(C/V/U)120PAG502 149
DP8(C/V/U)120PAG503 149
DP8(C/V/U)120PAG572 149
DP8(C/V/U)120PAG573 149
DP8(C/V/U)120PAG642 149
DP8(C/V/U)120PAG643 149
DP8(C/V/U)120PAG782 149
DP8(C/V/U)120PAG783 149
DP8(C/V/U)120PT1 151
DP8(C/V/U)120PT2 151
DP8(C/V/U)120PT3 151
DP8(C/V/U)120PTG1 151
DP8(C/V/U)120PTG2 151
DP8(C/V/U)120PTG3 151
DP8(C/V/U)PA362 93
DP8(C/V/U)PA363 93
DP8(C/V/U)PA364 93
DP8(C/V/U)PA422 93
DP8(C/V/U)PA423 93
DP8(C/V/U)PA424 93
DP8(C/V/U)PA502 93
DP8(C/V/U)PA503 93
DP8(C/V/U)PA504 93
DP8(C/V/U)PA572 93
DP8(C/V/U)PA573 93
DP8(C/V/U)PA574 93
DP8(C/V/U)PA642 93
DP8(C/V/U)PA643 93
DP8(C/V/U)PA644 93
DP8(C/V/U)PA782 93
DP8(C/V/U)PA783 93
DP8(C/V/U)PA784 93
DP8(C/V/U)PAWH2 93
DP8(C/V/U)PAWH3 93
DP8(C/V/U)PAWH4 93
DP8(C/V/U)PO362 96
DP8(C/V/U)PO363 95
DP8(C/V/U)PO364 95
DP8(C/V/U)PO36CPF 126
DP8(C/V/U)PO36S 96
DP8(C/V/U)PO422 96
DP8(C/V/U)PO423 95
DP8(C/V/U)PO424 95
DP8(C/V/U)PO42CPF 126
DP8(C/V/U)PO42S 96
DP8(C/V/U)PO502 96
DP8(C/V/U)PO503 95
DP8(C/V/U)PO504 95
pattern no. page
DP8(C/V/U)PO50CPF 126
DP8(C/V/U)PO50S 96
DP8(C/V/U)PO572 96
DP8(C/V/U)PO573 95
DP8(C/V/U)PO574 95
DP8(C/V/U)PO57CPF 126
DP8(C/V/U)PO57S 96
DP8(C/V/U)PO642 96
DP8(C/V/U)PO643 95
DP8(C/V/U)PO644 95
DP8(C/V/U)PO64CPF 126
DP8(C/V/U)PO64S 96
DP8(C/V/U)PO782 96
DP8(C/V/U)PO783 95
DP8(C/V/U)PO784 95
DP8(C/V/U)PO78S 96
DP8(C/V/U)POWH2 96
DP8(C/V/U)POWH3 95
DP8(C/V/U)POWH4 95
DP8(C/V/U)POWHCPF 126
DP8(C/V/U)POWHS 96
DP8(C/V/U)PT1 97
DP8(C/V/U)PT2 97
DP8(C/V/U)PT3 97
DP8(C/V/U)PT4 97
DP8(C/V/U)PTCP 126
DP8(C/V/U)PTCPH 126
DP8(C/V/U)PTS 97
DP8HLC 98
DP8PBR 40
DP8PBRN15 40
DP8PC07 99
DP8PC07UH 100
DP8PC106 99
DP8PC1062 99
DP8PC14 99
DP8PC14UH 100
DP8PC21 100
DP8PC21UH 100
DP8PC28 100
DP8PC28UH 100
DP8PC36 99, 100
DP8PC362 99
DP8PC36U 100
DP8PC42 99, 100
DP8PC422 99
DP8PC42U 100
DP8PC50 99
DP8PC502 99
DP8PC50U 100
DP8PC57 99
DP8PC572 99
DP8PC57U 100
DP8PC64 99
DP8PC642 99
DP8PC64U 100
DP8PC71 99
DP8PC712 99
DP8PC78 99
DP8PC782 99
DP8PC78U 100
DP8PC85 99
DP8PC852 99
DP8PC92 99
DP8PC922 99
pattern no. page
DP8PC99 99
DP8PC992 99
DP8PCWH 99
DP8PCWH2 99
DP8PCWH36 100
DP8PCWH42 100
DP8PCWH50 100
DP8PCWH57 100
DP8PCWH64 100
DP8PCWH78 100
DP8PCWHS14 99
DP8PCWHS142 99
DP8PCWHS21 99
DP8PCWHS212 99
DP8PCWHS28 99
DP8PCWHS282 99
DP8PCWHU 100
DP8PO36 95
DP8PO42 95
DP8PO50 95
DP8PO57 95
DP8PO64 95
DP8PO78 95
DP8POWH 95
DP8PPC 98
DP8PRFN24 82
DP8PRFN30 82
DP8PRFN36 82
DP8PRFN42 82
DP8PRFN48 82
DP8PRFN60 82
DP8SPO14 96
DP8SPO21 96
DP8SPO28 97
DPGPCG 124
DPGPFF 124
DPGPPB(L/R) 124
DPRD15736(L/R)L 74
DPRD15736(L/R)N 74
DPRD15742(L/R)L 74
DPRD15742(L/R)N 74
DPRD15748(L/R)L 74
DPRD15748(L/R)N 74
DPRD16436(L/R)L 74
DPRD16436(L/R)N 74
DPRD16442(L/R)L 74
DPRD16442(L/R)N 74
DPRD16448(L/R)L 74
DPRD16448(L/R)N 74
DPRD17836(L/R)L 74
DPRD17836(L/R)N 74
DPRD17842(L/R)L 74
DPRD17842(L/R)N 74
DPRD17848(L/R)L 74
DPRD17848(L/R)N 74
DPRD1JPM 75
DPRD1SSB 75
DPS7V1418 42
DPS7V1424 42
DPS7V1430 42
DPS7V1436 42
DPS7V1442 42
DPS7V1448 42
DPS7V1460 42
DPS7V2118 42
Dividends Horizon
312
pattern no. page
DPS7V2124 42
DPS7V2130 42
DPS7V2136 42
DPS7V2142 42
DPS7V2148 42
DPS7V2160 42
DPS7V2818 42
DPS7V2824 42
DPS7V2830 42
DPS7V2836 42
DPS7V2842 42
DPS7V2848 42
DPS7V2860 42
DS1 OHL 192
DS1 VD 192, 209
DS1BS 24 191
DS1BS 30 191
DS1BS 36 191
DS1BS 42 191
DS1BS 48 191
DS1BS 54 191
DS1BS 60 191
DS1BS 66 191
DS1BS 72 191
DS1DWDPL 196
DS1EAKIT 177
DS1LKKT 196
DS1PBD 196
DS1PCD 196
DS1PFD 196
DS1PFS 196
DS1PST 196
DS1S 24 190
DS1S 30 190
DS1S 36 190
DS1S 42 190
DS1S 48 190
DS1S 54 190
DS1S 60 190
DS1S 66 190
DS1S 72 190
DS1SWM 30 191
DS1SWM 36 191
DS1SWM 42 191
DS1SWM 48 191
DS1WM 24 191
DS1WM 30 191
DS1WM 36 191
DS1WM 42 191
DS1WM 48 191
DS2DW 30L 195
DS2DW 36L 195
DS2DWDPL30 197
DS2DWDPL36 197
DS2LKKT 196
DS2OD 36L 209
DS2OD 42L 209
DS2OD 48L 209
DS2OD 54L 209
DS2OD 60L 209
DS2OD 66L 209
DS2OD 72L 209
DS2PBD 196
DS2PF L18A 194
DS2PF L18B 194
pattern no. page
DS2PF L24A 194
DS2PF L24AB 194
DS2PF L24B 194
DS2PF L24BB 194
DS2PF L30A 194
DS2PF L30B 194
DS2PFD 196
DS2PM L18A 195
DS2PM L18B 195
DS2PM L18F 195
DS2PM L24A 195
DS2PM L24B 195
DS2PM L24F 195
DS2PM24L 177
DS2PM30L 177
DS2PM36L 177
DS2PM42L 177
DS2PM48L 177
DS2PM54L 177
DS2PM60L 177
DS2PM66L 177
DS2PM72L 177
DS2PPTC 196
DS2PPTN 196
DS2UM30L 189
DS2UM36L 189
DS2UM42L 189
DS2UM48L 189
DS2UM54L 189
DS2UM60L 189
DS2UM66L 189
DS2UM72L 189
DS2XPB 194
DS3CMN3614 187
DS3CMN4214 187
DS3CMN4814 187
DS3CMN6014 187
DS3CMN7214 187
DS3CMSL3614L 188
DS3CMSL4214L 188
DS3CMSL4814L 188
DS3CMSL6014L 188
DS3CMSL7214L 188
DS3CMSS3614L 187
DS3CMSS4214L 187
DS3CMSS4814L 187
DS3CMSS6014L 187
DS3CMSS7214L 187
DS3CMSV3614L 188
DS3CMSV4214L 188
DS3CMSV4814L 188
DS3CMSV6014L 188
DS3CMSV7214L 188
DS3CMT(S/G)3614L 187
DS3CMT(S/G)4214L 187
DS3CMT(S/G)4814L 187
DS3CMT(S/G)6014L 187
DS3CMT(S/G)7214L 187
DS3ODNS 212, 216, 221, 226
DS3ODNS1573014 211
DS3ODNS1573014T 219
DS3ODNS1573614 211
DS3ODNS1573614T 219
DS3ODNS1574214 211
DS3ODNS1574214T 219
pattern no. page
DS3ODNS1574814 211
DS3ODNS1574814T 219
DS3ODNS1576014 211
DS3ODNS1576014T 219
DS3ODNS1576614 211
DS3ODNS1576614T 219
DS3ODNS1577214 211
DS3ODNS1577214T 219
DS3ODNS1643014 214
DS3ODNS1643014T 224
DS3ODNS1643614 214
DS3ODNS1643614T 224
DS3ODNS1644214 214
DS3ODNS1644214T 224
DS3ODNS1644814 214
DS3ODNS1644814T 224
DS3ODNS1646014 214
DS3ODNS1646014T 224
DS3ODNS1646614 214
DS3ODNS1646614T 224
DS3ODNS1647214 214
DS3ODNS1647214T 224
DS3ODSL 213, 218, 223, 228
DS3ODSL1573014L 211
DS3ODSL1573014LT 219
DS3ODSL1573614L 211
DS3ODSL1573614LT 219
DS3ODSL1574214L 211
DS3ODSL1574214LT 219
DS3ODSL1574814L 211
DS3ODSL1574814LT 219
DS3ODSL1576014L 211
DS3ODSL1576014LT 219
DS3ODSL1576614L 211
DS3ODSL1576614LT 219
DS3ODSL1577214L 211
DS3ODSL1577214LT 219
DS3ODSL1643014L 214
DS3ODSL1643014LT 224
DS3ODSL1643614L 214
DS3ODSL1643614LT 224
DS3ODSL1644214L 214
DS3ODSL1644214LT 224
DS3ODSL1644814L 214
DS3ODSL1644814LT 224
DS3ODSL1646014L 214
DS3ODSL1646014LT 224
DS3ODSL1646614L 214
DS3ODSL1646614LT 224
DS3ODSL1647214L 214
DS3ODSL1647214LT 224
DS3ODSL2573021FL 212
DS3ODSL2573021FLT 221
DS3ODSL2573621FL 212
DS3ODSL2573621FLT 221
DS3ODSL2574221FL 212
DS3ODSL2574221FLT 221
DS3ODSL2574821FL 212
DS3ODSL2574821FLT 221
DS3ODSL2576021FL 212
DS3ODSL2576021FLT 221
DS3ODSL2576621FL 212
DS3ODSL2576621FLT 221
DS3ODSL2577221FL 212
DS3ODSL2577221FLT 221
pattern no. page
DS3ODSL2643021FL 216
DS3ODSL2643021FLT 226
DS3ODSL2643621FL 216
DS3ODSL2643621FLT 226
DS3ODSL2644221FL 216
DS3ODSL2644221FLT 226
DS3ODSL2644821FL 216
DS3ODSL2644821FLT 226
DS3ODSL2646021FL 216
DS3ODSL2646021FLT 226
DS3ODSL2646621FL 216
DS3ODSL2646621FLT 226
DS3ODSL2647221FL 216
DS3ODSL2647221FLT 226
DS3ODSS 213, 218, 223, 228
DS3ODSS1573014L 211
DS3ODSS1573014LT 219
DS3ODSS1573614L 211
DS3ODSS1573614LT 219
DS3ODSS1574214L 211
DS3ODSS1574214LT 219
DS3ODSS1574814L 211
DS3ODSS1574814LT 219
DS3ODSS1576014L 211
DS3ODSS1576014LT 219
DS3ODSS1576614L 211
DS3ODSS1576614LT 219
DS3ODSS1577214L 211
DS3ODSS1577214LT 219
DS3ODSS1643014L 214
DS3ODSS1643014LT 224
DS3ODSS1643614L 214
DS3ODSS1643614LT 224
DS3ODSS1644214L 214
DS3ODSS1644214LT 224
DS3ODSS1644814L 214
DS3ODSS1644814LT 224
DS3ODSS1646014L 214
DS3ODSS1646014LT 224
DS3ODSS1646614L 214
DS3ODSS1646614LT 224
DS3ODSS1647214L 214
DS3ODSS1647214LT 224
DS3ODSS2573021FL 212
DS3ODSS2573021FLT 221
DS3ODSS2573621FL 212
DS3ODSS2573621FLT 221
DS3ODSS2574221FL 212
DS3ODSS2574221FLT 221
DS3ODSS2574821FL 212
DS3ODSS2574821FLT 221
DS3ODSS2576021FL 212
DS3ODSS2576021FLT 221
DS3ODSS2576621FL 212
DS3ODSS2576621FLT 221
DS3ODSS2577221FL 212
DS3ODSS2577221FLT 221
DS3ODSS2643021FL 216
DS3ODSS2643021FLT 226
DS3ODSS2643621FL 216
DS3ODSS2643621FLT 226
DS3ODSS2644221FL 216
DS3ODSS2644221FLT 226
DS3ODSS2644821FL 216
DS3ODSS2644821FLT 226
Dividends Horizon
313
pattern no. page
DS3ODSS2646021FL 216
DS3ODSS2646021FLT 226
DS3ODSS2646621FL 216
DS3ODSS2646621FLT 226
DS3ODSS2647221FL 216
DS3ODSS2647221FLT 226
DS3ODSV 213, 218, 223, 228
DS3ODSV1573014L 211
DS3ODSV1573014LT 220
DS3ODSV1573614L 211
DS3ODSV1573614LT 220
DS3ODSV1574214L 211
DS3ODSV1574214LT 220
DS3ODSV1574814L 211
DS3ODSV1574814LT 220
DS3ODSV1576014L 211
DS3ODSV1576014LT 220
DS3ODSV1576614L 211
DS3ODSV1576614LT 220
DS3ODSV1577214L 211
DS3ODSV1577214LT 220
DS3ODSV1643014L 215
DS3ODSV1643014LT 225
DS3ODSV1643614L 215
DS3ODSV1643614LT 225
DS3ODSV1644214L 215
DS3ODSV1644214LT 225
DS3ODSV1644814L 215
DS3ODSV1644814LT 225
DS3ODSV1646014L 215
DS3ODSV1646014LT 225
DS3ODSV1646614L 215
DS3ODSV1646614LT 225
DS3ODSV1647214L 215
DS3ODSV1647214LT 225
DS3ODSV2573021FL 212
DS3ODSV2573021FLT 222
DS3ODSV2573621FL 212
DS3ODSV2573621FLT 222
DS3ODSV2574221FL 212
DS3ODSV2574221FLT 222
DS3ODSV2574821FL 212
DS3ODSV2574821FLT 222
DS3ODSV2576021FL 212
DS3ODSV2576021FLT 222
DS3ODSV2576621FL 212
DS3ODSV2576621FLT 222
DS3ODSV2577221FL 212
DS3ODSV2577221FLT 222
DS3ODSV2643021FL 217
DS3ODSV2643021FLT 227
DS3ODSV2643621FL 217
DS3ODSV2643621FLT 227
DS3ODSV2644221FL 217
DS3ODSV2644221FLT 227
DS3ODSV2644821FL 217
DS3ODSV2644821FLT 227
DS3ODSV2646021FL 217
DS3ODSV2646021FLT 227
DS3ODSV2646621FL 217
DS3ODSV2646621FLT 227
DS3ODSV2647221FL 217
DS3ODSV2647221FLT 227
DS3PML30L 177
DS3PML36L 177
pattern no. page
DS3PML42L 177
DS3PML48L 177
DS3PML60L 177
DS3PML66L 177
DS3PML72L 177
DS3PMNS3014 179
DS3PMNS3021 181
DS3PMNS3614 179
DS3PMNS3621 181
DS3PMNS4214 179
DS3PMNS4221 181
DS3PMNS4814 179
DS3PMNS4821 181
DS3PMNS6014 179
DS3PMNS6021 181
DS3PMNS6614 179
DS3PMNS6621 181
DS3PMNS7214 179
DS3PMNS7221 181
DS3PMS30L 177
DS3PMS36L 177
DS3PMS42L 177
DS3PMS48L 177
DS3PMS60L 177
DS3PMS66L 177
DS3PMS72L 177
DS3PMSL3014L 179
DS3PMSL3021FL 181
DS3PMSL3021PL 182
DS3PMSL3614L 179
DS3PMSL3621FL 181
DS3PMSL3621PL 182
DS3PMSL4214L 179
DS3PMSL4221FL 181
DS3PMSL4221PL 182
DS3PMSL4814L 179
DS3PMSL4821FL 181
DS3PMSL4821PL 182
DS3PMSL6014L 179
DS3PMSL6021FL 181
DS3PMSL6021PL 182
DS3PMSL6614L 179
DS3PMSL6621FL 181
DS3PMSL6621PL 182
DS3PMSL7214L 179
DS3PMSL7221FL 181
DS3PMSL7221PL 182
DS3PMSS3014L 179
DS3PMSS3021FL 181
DS3PMSS3021PL 182
DS3PMSS3614L 179
DS3PMSS3621FL 181
DS3PMSS3621PL 182
DS3PMSS4214L 179
DS3PMSS4221FL 181
DS3PMSS4221PL 182
DS3PMSS4814L 179
DS3PMSS4821FL 181
DS3PMSS4821PL 182
DS3PMSS6014L 179
DS3PMSS6021FL 181
DS3PMSS6021PL 182
DS3PMSS6614L 179
DS3PMSS6621FL 181
DS3PMSS6621PL 182
pattern no. page
DS3PMSS7214L 179
DS3PMSS7221FL 181
DS3PMSS7221PL 182
DS3PMSV3014L 180
DS3PMSV3021FL 181
DS3PMSV3021PL 182
DS3PMSV3614L 180
DS3PMSV3621FL 181
DS3PMSV3621PL 182
DS3PMSV4214L 180
DS3PMSV4221FL 181
DS3PMSV4221PL 182
DS3PMSV4814L 180
DS3PMSV4821FL 181
DS3PMSV4821PL 182
DS3PMSV6014L 180
DS3PMSV6021FL 181
DS3PMSV6021PL 182
DS3PMSV6614L 180
DS3PMSV6621FL 181
DS3PMSV6621PL 182
DS3PMSV7214L 180
DS3PMSV7221FL 181
DS3PMSV7221PL 182
DS3PMT(S/G)3614L 179
DS3PMT(S/G)4214L 179
DS3PMT(S/G)4814L 179
DS3PMT(S/G)6014L 179
DS3PMT(S/G)7214L 179
DS3PMV30L 178
DS3PMV36L 178
DS3PMV42L 178
DS3PMV48L 178
DS3PMV60L 178
DS3PMV66L 178
DS3PMV72L 178
DS3SMN3614 185
DS3SMN4214 185
DS3SMN4814 185
DS3SMN6014 185
DS3SMN7214 185
DS3SMSL3614L 185
DS3SMSL4214L 185
DS3SMSL4814L 185
DS3SMSL6014L 185
DS3SMSL7214L 185
DS3SMSS3614L 185
DS3SMSS4214L 185
DS3SMSS4814L 185
DS3SMSS6014L 185
DS3SMSS7214L 185
DS3SMSV3614L 186
DS3SMSV4214L 186
DS3SMSV4814L 186
DS3SMSV6014L 186
DS3SMSV7214L 186
DS3SMT(S/G)3614L 185
DS3SMT(S/G)4214L 185
DS3SMT(S/G)4814L 185
DS3SMT(S/G)6014L 185
DS3SMT(S/G)7214L 185
DS3WMN3614 183
DS3WMN4214 183
DS3WMN4814 183
DS3WMN6014 183
pattern no. page
DS3WMN7214 183
DS3WMSL3614L 183
DS3WMSL4214L 183
DS3WMSL4814L 183
DS3WMSL6014L 183
DS3WMSL7214L 183
DS3WMSS3614L 183
DS3WMSS4214L 183
DS3WMSS4814L 183
DS3WMSS6014L 183
DS3WMSS7214L 183
DS3WMSV3614L 183
DS3WMSV4214L 183
DS3WMSV4814L 183
DS3WMSV6014L 183
DS3WMSV7214L 183
DS3WMT(S/G)3614L 184
DS3WMT(S/G)4214L 184
DS3WMT(S/G)4814L 184
DS3WMT(S/G)6014L 184
DS3WMT(S/G)7214L 184
DS4LC1ANL24N 201
DS4LC1ANL30N 201
DS4LC1ANL36N 201
DS4LC1ANL42N 201
DS4LC1ANL48N 201
DS4LC1ANL54N 201
DS4LC1ANL60N 201
DS4LC1ANL66N 201
DS4LC1ANL72N 201
DS4LC1ANS42N 198
DS4LC1ANS48N 198
DS4LC1ANS54N 198
DS4LC1ANS60N 198
DS4LC1ANS66N 198
DS4LC1ANS72N 198
DS4LC1ANV24N 205
DS4LC1ANV30N 205
DS4LC1ANV36N 205
DS4LC1ANV42N 205
DS4LC1ANV48N 205
DS4LC1ANV54N 205
DS4LC1ANV60N 205
DS4LC1ANV66N 205
DS4LC1ANV72N 205
DS4LC1BLL30L 201
DS4LC1BLL36L 201
DS4LC1BLL42L 201
DS4LC1BLL48L 201
DS4LC1BLL54L 201
DS4LC1BLL60L 201
DS4LC1BLL66L 201
DS4LC1BLL72L 201
DS4LC1BLS42L 198
DS4LC1BLS48L 198
DS4LC1BLS54L 198
DS4LC1BLS60L 198
DS4LC1BLS66L 198
DS4LC1BLS72L 198
DS4LC1BLV30L 205
DS4LC1BLV36L 205
DS4LC1BLV42L 205
DS4LC1BLV48L 205
DS4LC1BLV54L 205
DS4LC1BLV60L 205
Dividends Horizon
314
pattern no. page
DS4LC1BLV66L 205
DS4LC1BLV72L 205
DS4LC1BSL30L 201
DS4LC1BSL36L 201
DS4LC1BSL42L 201
DS4LC1BSL48L 201
DS4LC1BSL54L 201
DS4LC1BSL60L 201
DS4LC1BSL66L 201
DS4LC1BSL72L 201
DS4LC1BSS42L 198
DS4LC1BSS48L 198
DS4LC1BSS54L 198
DS4LC1BSS60L 198
DS4LC1BSS66L 198
DS4LC1BSS72L 198
DS4LC1BSV30L 205
DS4LC1BSV36L 205
DS4LC1BSV42L 205
DS4LC1BSV48L 205
DS4LC1BSV54L 205
DS4LC1BSV60L 205
DS4LC1BSV66L 205
DS4LC1BSV72L 205
DS4LC1BVL30L 202
DS4LC1BVL36L 202
DS4LC1BVL42L 202
DS4LC1BVL48L 202
DS4LC1BVL54L 202
DS4LC1BVL60L 202
DS4LC1BVL66L 202
DS4LC1BVL72L 202
DS4LC1BVS42L 198
DS4LC1BVS48L 198
DS4LC1BVS54L 198
DS4LC1BVS60L 198
DS4LC1BVS66L 198
DS4LC1BVS72L 198
DS4LC1BVV30L 206
DS4LC1BVV36L 206
DS4LC1BVV42L 206
DS4LC1BVV48L 206
DS4LC1BVV54L 206
DS4LC1BVV60L 206
DS4LC1BVV66L 206
DS4LC1BVV72L 206
DS4LC1CLL30L 203
DS4LC1CLL36L 203
DS4LC1CLL42L 203
DS4LC1CLL48L 203
DS4LC1CLL54L 203
DS4LC1CLL60L 203
DS4LC1CLL66L 203
DS4LC1CLL72L 203
DS4LC1CLS42L 199
DS4LC1CLS48L 199
DS4LC1CLS54L 199
DS4LC1CLS60L 199
DS4LC1CLS66L 199
DS4LC1CLS72L 199
DS4LC1CLV30L 207
DS4LC1CLV36L 207
DS4LC1CLV42L 207
DS4LC1CLV48L 207
DS4LC1CLV54L 207
pattern no. page
DS4LC1CLV60L 207
DS4LC1CLV66L 207
DS4LC1CLV72L 207
DS4LC1CSL30L 203
DS4LC1CSL36L 203
DS4LC1CSL42L 203
DS4LC1CSL48L 203
DS4LC1CSL54L 203
DS4LC1CSL60L 203
DS4LC1CSL66L 203
DS4LC1CSL72L 203
DS4LC1CSS42L 199
DS4LC1CSS48L 199
DS4LC1CSS54L 199
DS4LC1CSS60L 199
DS4LC1CSS66L 199
DS4LC1CSS72L 199
DS4LC1CSV30L 207
DS4LC1CSV36L 207
DS4LC1CSV42L 207
DS4LC1CSV48L 207
DS4LC1CSV54L 207
DS4LC1CSV60L 207
DS4LC1CSV66L 207
DS4LC1CSV72L 207
DS4LC1CVL30L 203
DS4LC1CVL36L 203
DS4LC1CVL42L 203
DS4LC1CVL48L 203
DS4LC1CVL54L 203
DS4LC1CVL60L 203
DS4LC1CVL66L 203
DS4LC1CVL72L 203
DS4LC1CVS42L 199
DS4LC1CVS48L 199
DS4LC1CVS54L 199
DS4LC1CVS60L 199
DS4LC1CVS66L 199
DS4LC1CVS72L 199
DS4LC1CVV30L 207
DS4LC1CVV36L 207
DS4LC1CVV42L 207
DS4LC1CVV48L 207
DS4LC1CVV54L 207
DS4LC1CVV60L 207
DS4LC1CVV66L 207
DS4LC1CVV72L 207
DS4LC1DLL30L 204
DS4LC1DLL36L 204
DS4LC1DLL42L 204
DS4LC1DLL48L 204
DS4LC1DLL54L 204
DS4LC1DLL60L 204
DS4LC1DLL66L 204
DS4LC1DLL72L 204
DS4LC1DLS42L 200
DS4LC1DLS48L 200
DS4LC1DLS54L 200
DS4LC1DLS60L 200
DS4LC1DLS66L 200
DS4LC1DLS72L 200
DS4LC1DLV30L 208
DS4LC1DLV36L 208
DS4LC1DLV42L 208
DS4LC1DLV48L 208
pattern no. page
DS4LC1DLV54L 208
DS4LC1DLV60L 208
DS4LC1DLV66L 208
DS4LC1DLV72L 208
DS4LC1DSL30L 204
DS4LC1DSL36L 204
DS4LC1DSL42L 204
DS4LC1DSL48L 204
DS4LC1DSL54L 204
DS4LC1DSL60L 204
DS4LC1DSL66L 204
DS4LC1DSL72L 204
DS4LC1DSS42L 200
DS4LC1DSS48L 200
DS4LC1DSS54L 200
DS4LC1DSS60L 200
DS4LC1DSS66L 200
DS4LC1DSS72L 200
DS4LC1DSV30L 208
DS4LC1DSV36L 208
DS4LC1DSV42L 208
DS4LC1DSV48L 208
DS4LC1DSV54L 208
DS4LC1DSV60L 208
DS4LC1DSV66L 208
DS4LC1DSV72L 208
DS4LC1DVL30L 204
DS4LC1DVL36L 204
DS4LC1DVL42L 204
DS4LC1DVL48L 204
DS4LC1DVL54L 204
DS4LC1DVL60L 204
DS4LC1DVL66L 204
DS4LC1DVL72L 204
DS4LC1DVS42L 200
DS4LC1DVS48L 200
DS4LC1DVS54L 200
DS4LC1DVS60L 200
DS4LC1DVS66L 200
DS4LC1DVS72L 200
DS4LC1DVV30L 208
DS4LC1DVV36L 208
DS4LC1DVV42L 208
DS4LC1DVV48L 208
DS4LC1DVV54L 208
DS4LC1DVV60L 208
DS4LC1DVV66L 208
DS4LC1DVV72L 208
DSCSWDB24 191
DSCSWDB30 191
DSCSWDB36 191
DSCSWDB42 191
DSCSWDB48 191
DT1ARY6024NS 294
DT1ARY6030NS 294
DT1ARY6036N 295
DT1ARY6624NS 294
DT1ARY6630NS 294
DT1ARY6636N 295
DT1ARY7224NS 294
DT1ARY7230NS 294
DT1ARY7236N 295
DT1ARY7824NS 294
DT1ARY7830NS 294
DT1ARY7836N 295
pattern no. page
DT1ARY8424NS 294
DT1ARY8430NS 294
DT1ARY8436N 295
DT1ARY8442N 295
DT1ARY9024NS 294
DT1ARY9030NS 294
DT1ARY9036N 295
DT1ARY9042N 295
DT1ARY9624NS 294
DT1ARY9630NS 294
DT1ARY9636N 295
DT1ARY9642N 295
DT1ASX3030 300
DT1ASX303017 300
DT1ASX303021 300
DT1ASX303036 300
DT1ASX3636 300
DT1ASX363617 300
DT1ASX363621 300
DT1ASX363636 300
DT1ASX4242 300
DT1ASX424217 300
DT1ASX424221 300
DT1ASX424236 300
DT1ASX4848 300
DT1ASX484817 300
DT1ASX484821 300
DT1ASX484836 300
DT1ATY6024NS 296
DT1ATY6030NS 296
DT1ATY6036N 297
DT1ATY6624NS 296
DT1ATY6630NS 296
DT1ATY6636N 297
DT1ATY7224NS 296
DT1ATY7230NS 296
DT1ATY7236N 297
DT1ATY7824NS 296
DT1ATY7830NS 296
DT1ATY7836N 297
DT1ATY8424NS 296
DT1ATY8430NS 296
DT1ATY8436N 297
DT1ATY8442N 297
DT1ATY9024NS 296
DT1ATY9030NS 296
DT1ATY9036N 297
DT1ATY9042N 297
DT1ATY9624NS 296
DT1ATY9630NS 296
DT1ATY9636N 297
DT1ATY9642N 297
DT1CRY6024N 298
DT1CRY6030N 298
DT1CRY6036N 298
DT1CRY6624N 298
DT1CRY6630N 298
DT1CRY6636N 298
DT1CRY7224N 298
DT1CRY7230N 298
DT1CRY7236N 298
DT1CRY7824N 298
DT1CRY7830N 298
DT1CRY7836N 298
DT1CRY8424N 298
Dividends Horizon
315
pattern no. page
DT1CRY8430N 298
DT1CRY8436N 298
DT1CRY9024N 298
DT1CRY9030N 298
DT1CRY9036N 298
DT1CRY9624N 298
DT1CRY9630N 298
DT1CRY9636N 298
DT1CTY6024N 299
DT1CTY6030N 299
DT1CTY6036N 299
DT1CTY6624N 299
DT1CTY6630N 299
DT1CTY6636N 299
DT1CTY7224N 299
DT1CTY7230N 299
DT1CTY7236N 299
DT1CTY7824N 299
DT1CTY7830N 299
DT1CTY7836N 299
DT1CTY8424N 299
DT1CTY8430N 299
DT1CTY8436N 299
DT1CTY9024N 299
DT1CTY9030N 299
DT1CTY9036N 299
DT1CTY9624N 299
DT1CTY9630N 299
DT1CTY9636N 299
DVDB6024LN 237
DVDB6024RN 237
DVDB6030LN 237
DVDB6030RN 237
DVDB6624LN 237
DVDB6624RN 237
DVDB6630LN 237
DVDB6630RN 237
DVDB7224LN 237
DVDB7224RN 237
DVDB7230LN 237
DVDB7230RN 237
DVDB7824LN 237
DVDB7824RN 237
DVDB7830LN 237
DVDB7830RN 237
DVDB8424LN 237
DVDB8424RN 237
DVDB8430LN 237
DVDB8430RN 237
DVDB9024LN 237
DVDB9024RN 237
DVDB9030LN 237
DVDB9030RN 237
DVDB9624LN 237
DVDB9624RN 237
DVDB9630LN 237
DVDB9630RN 237
DVDS6020LN 236
DVDS6020RN 236
DVDS6620LN 236
DVDS6620RN 236
DVDS7220LN 236
DVDS7220RN 236
DVDS7820LN 236
DVDS7820RN 236
pattern no. page
DVDS8420LN 236
DVDS8420RN 236
DVDS9020LN 236
DVDS9020RN 236
DVDS9620LN 236
DVDS9620RN 236
LU1-C4242SS 270
LU1-C4848DD 270
LU1-C4848DS 270
LU1-C4848SD 270
LU1-C4848SS 270
LU1-C4860DS 270
LU1-C4860SD 270
LU1-C4860SS 270
LU1-C4872DS 270
LU1-C4872SD 270
LU1-C4872SS 270
LU1-C6048DS 270
LU1-C6048SD 270
LU1-C6048SS 270
LU1-C7248DS 270
LU1-C7248SD 270
LU1-C7248SS 270
LU1-D36S-B 273
LU1-D42S-B 273
LU1-D48S-B 273
LU1-M48S-BLL 274
LU1-M48S-BRL 274
LU1-R3050-B 271
LU1-R6330B 271
LU1-R7530B 271
LU1-S10818-A 265
LU1-S10818-B 265
LU1-S10824-A 266
LU1-S10824-B 266
LU1-S12018-A 265
LU1-S12018-B 265
LU1-S12024-A 266
LU1-S12024-B 266
LU1-S2424-A 266
LU1-S2424-B 266
LU1-S3018-A 265
LU1-S3018-B 265
LU1-S3024-A 266
LU1-S3024-B 266
LU1-S3030-A 267
LU1-S3030-B 267
LU1-S3618-A 265
LU1-S3618-B 265
LU1-S3624-A 266
LU1-S3624-B 266
LU1-S3630-A 267
LU1-S3630-B 267
LU1-S4218-A 265
LU1-S4218-B 265
LU1-S4224-A 266
LU1-S4224-B 266
LU1-S4230-A 267
LU1-S4230-B 267
LU1-S4818-A 265
LU1-S4818-B 265
LU1-S4824-A 266
LU1-S4824-B 266
LU1-S4830-A 267
LU1-S4830-B 267
pattern no. page
LU1-S5418-A 265
LU1-S5418-B 265
LU1-S5424-A 266
LU1-S5424-B 266
LU1-S5430-A 267
LU1-S5430-B 267
LU1-S6018-A 265
LU1-S6018-B 265
LU1-S6024-A 266
LU1-S6024-B 266
LU1-S6030-A 267
LU1-S6030-B 267
LU1-S6618-A 265
LU1-S6618-B 265
LU1-S6624-A 266
LU1-S6624-B 266
LU1-S6630-A 267
LU1-S6630-B 267
LU1-S7218-A 265
LU1-S7218-B 265
LU1-S7224-A 266
LU1-S7224-B 266
LU1-S7230-A 267
LU1-S7230-B 267
LU1-S7818-A 265
LU1-S7818-B 265
LU1-S7824-A 266
LU1-S7824-B 266
LU1-S7830-A 267
LU1-S7830-B 267
LU1-S8418-A 265
LU1-S8418-B 265
LU1-S8424-A 266
LU1-S8424-B 266
LU1-S8430-A 267
LU1-S8430-B 267
LU1-S9018-A 265
LU1-S9018-B 265
LU1-S9024-A 266
LU1-S9024-B 266
LU1-S9030-A 267
LU1-S9030-B 267
LU1-S9618-A 265
LU1-S9618-B 265
LU1-S9624-A 266
LU1-S9624-B 266
LU1-S9630-A 267
LU1-S9630-B 267
LU1-T48A-L 268
LU1-T48A-R 268
LU1-T48B-L 268
LU1-T48B-R 268
LU1-T54A-L 268
LU1-T54A-R 268
LU1-T54B-L 268
LU1-T54B-R 268
LU1-T60A-L 268
LU1-T60A-R 268
LU1-T60B-L 268
LU1-T60B-R 268
LU1-T72A-L 268
LU1-T72A-R 268
LU1-T72B-L 268
LU1-T72B-R 268
LU1-V3618-A 269
pattern no. page
LU1-V3624-A 269
LU1-V4224-A 269
LU1-V4230-A 269
LU1-V4824-A 269
LU1-V4830-A 269
LU1-W36AL 272
LU1-W36AR 272
LU1-W36BL 272
LU1-W36BR 272
LU1-W42AL 272
LU1-W42AR 272
LU1-W42BL 272
LU1-W42BR 272
LU1-W48AL 272
LU1-W48AR 272
LU1-W48BL 272
LU1-W48BR 272
LU1-Y36S-B 273
LU1-Y42S-B 273
LU1-Y48S-B 273
LU1-Y60S-B 273
LU1-YTS 273
MB3-F18M 278
MB3-F18W 278
MB3-F24M 278
MB3-F24W 278
MB3-F30M 278
MB3-F30W 278
MM1-PD 113
MM1-SF 113
MM1UG 113
MM1WG 113
MM2-CG 113
MM2-CH 113
MM2-NCG 113
MSAMP1616 113
MU1-C4242SS 262
MU1-C4848DD 262
MU1-C4848DS 262
MU1-C4848SD 262
MU1-C4848SS 262
MU1-C4860DS 262
MU1-C4860SD 262
MU1-C4860SS 262
MU1-C4872DS 262
MU1-C4872SD 262
MU1-C4872SS 262
MU1-C6048DS 262
MU1-C6048SD 262
MU1-C6048SS 262
MU1-C7248DS 262
MU1-C7248SD 262
MU1-C7248SS 262
MU1-M48S-AL 264
MU1-M48S-AR 264
MU1-P72SA 261
MU1-P78DA 261
MU1-R3048-B 260
MU1-R3050-B 260
MU1-R6330B 259
MU1-R6330E 259
MU1-R7530B 259
MU1-R7530E 259
MU1-S2424-A 255
MU1-S2424-B 255
Dividends Horizon
316
pattern no. page
MU1-S3018-B 254
MU1-S3024-A 255
MU1-S3024-B 255
MU1-S3030-A 256
MU1-S3030-B 256
MU1-S3618-B 254
MU1-S3624-A 255
MU1-S3624-B 255
MU1-S3630-A 256
MU1-S3630-B 256
MU1-S4218-B 254
MU1-S4224-A 255
MU1-S4224-B 255
MU1-S4230-A 256
MU1-S4230-B 256
MU1-S4818-B 254
MU1-S4824-A 255
MU1-S4824-B 255
MU1-S4830-A 256
MU1-S4830-B 256
MU1-S5418-B 254
MU1-S5424-A 255
MU1-S5424-B 255
MU1-S5430-A 256
MU1-S5430-B 256
MU1-S6018-B 254
MU1-S6024-A 255
MU1-S6024-B 255
MU1-S6030-A 256
MU1-S6030-B 256
MU1-S6618-B 254
MU1-S6624-A 255
MU1-S6624-B 255
MU1-S6630-A 256
MU1-S6630-B 256
MU1-S7218-B 254
MU1-S7224-A 255
MU1-S7224-B 255
MU1-S7230-A 256
MU1-S7230-B 256
MU1-S7824-A 255
MU1-S7824-B 255
MU1-S7830-A 256
MU1-S7830-B 256
MU1-S8424-A 255
MU1-S8424-B 255
MU1-S8430-A 256
MU1-S8430-B 256
MU1-S9024-A 255
MU1-S9024-B 255
MU1-S9030-A 256
MU1-S9030-B 256
MU1-S9624-A 255
MU1-S9624-B 255
MU1-S9630-A 256
MU1-S9630-B 256
MU1-V3618-A 257
MU1-V3624-A 257
MU1-V3624-C 257
MU1-V4224-A 257
MU1-V4224-C 257
MU1-V4230-A 257
MU1-V4230-C 257
MU1-V42SS-A 258
MU1-V42SS-C 258
pattern no. page
MU1-V4824-A 257
MU1-V4824-C 257
MU1-V4830-A 257
MU1-V4830-C 257
MU1-V48DS-A 258
MU1-V48DS-C 258
MU1-V48SS-A 258
MU1-V48SS-C 258
MU1-Y36S-AL 263
MU1-Y36S-AR 263
MU1-Y42S-AL 263
MU1-Y42S-AR 263
MU1-Y48S-AL 263
MU1-Y48S-AR 263
MU1-Y60S-AL 263
MU1-Y60S-AR 263
MU1-YTS 263
MW2-R6330B 253
MW2-R6330E 253
MW2-R7530B 253
MW2-R7530E 253
MW2-R8730B 253
MW2-R8730E 253
MW2-S2424-A 249
MW2-S2424-B 249
MW2-S3018-B 248
MW2-S3024-A 249
MW2-S3024-B 249
MW2-S3030-A 250
MW2-S3030-B 250
MW2-S3618-B 248
MW2-S3624-A 249
MW2-S3624-B 249
MW2-S3630-A 250
MW2-S3630-B 250
MW2-S4218-B 248
MW2-S4224-A 249
MW2-S4224-B 249
MW2-S4230-A 250
MW2-S4230-B 250
MW2-S4818-B 248
MW2-S4824-A 249
MW2-S4824-B 249
MW2-S4830-A 250
MW2-S4830-B 250
MW2-S5418-B 248
MW2-S5424-A 249
MW2-S5424-B 249
MW2-S5430-A 250
MW2-S5430-B 250
MW2-S6018-B 248
MW2-S6024-A 249
MW2-S6024-B 249
MW2-S6030-A 250
MW2-S6030-B 250
MW2-S6618-B 248
MW2-S6624-A 249
MW2-S6624-B 249
MW2-S6630-A 250
MW2-S6630-B 250
MW2-S6636-B 251
MW2-S6636-R 251
MW2-S7218-B 248
MW2-S7224-A 249
MW2-S7224-B 249
pattern no. page
MW2-S7230-A 250
MW2-S7230-B 250
MW2-S7236-B 251
MW2-S7236-R 251
MW2-S7824-A 249
MW2-S7824-B 249
MW2-S7830-A 250
MW2-S7830-B 250
MW2-S7836-B 251
MW2-S7836-R 251
MW2-S8424-A 249
MW2-S8424-B 249
MW2-S8430-A 250
MW2-S8430-B 250
MW2-S9024-A 249
MW2-S9024-B 249
MW2-S9030-A 250
MW2-S9030-B 250
MW2-S9624-A 249
MW2-S9624-B 249
MW2-S9630-A 250
MW2-S9630-B 250
MW2-V3618-A 252
MW2-V3624-A 252
MW2-V3624-C 252
MW2-V4224-A 252
MW2-V4224-C 252
MW2-V4230-A 252
MW2-V4230-C 252
MW2-V4824-A 252
MW2-V4824-C 252
MW2-V4830-A 252
MW2-V4830-C 252
MZ1-B3015 279
MZ1-B3019 279
MZ1-B3022 280
MZ1-B3615 279
MZ1-B3619 279
MZ1-B3622 280
MZ1-B4215 279
MZ1-B4219 279
MZ1-B4222 280
MZ1-B4815 279
MZ1-B4819 279
MZ1-B4822 280
MZ1-B5415 279
MZ1-B5419 279
MZ1-B5422 280
MZ1-B6015 279
MZ1-B6019 279
MZ1-B6022 280
MZ1-B6615 279
MZ1-B6619 279
MZ1-B6622 280
MZ1-B7215 279
MZ1-B7219 279
MZ1-B7222 280
MZ1-B7815 279
MZ1-B7819 279
MZ1-B7822 280
MZ1-E2415-W/U 282
MZ1-E2419-W/U 282
MZ1-E2422-W/U 282
MZ1-E3015-W/U 282
MZ1-E3019-W/U 282
pattern no. page
MZ1-E3022-W/U 282
MZ1-LS 113
MZ1-S2415-W/U 282
MZ1-S2419-W/U 282
MZ1-S2422-W/U 282
MZ1-S3015-W/U 282
MZ1-S3019-W/U 282
MZ1-S3022-W/U 282
MZ1-SS 113
MZ1-V3615 281
MZ1-V3619 281
MZ1-V3622 281
MZ1-V4215 281
MZ1-V4219 281
MZ1-V4222 281
MZ1-V4815 281
MZ1-V4819 281
MZ1-V4822 281
MZ1-V6015 281
MZ1-V6019 281
MZ1-V6022 281
MZ1-V7215 281
MZ1-V7219 281
MZ1-V7222 281
RDOTK1 163
Dividends Horizon
317
This Selling Policy supersedes all previous selling policies and is inclusive of Knoll, KnollStudio and Muuto. Prices, discounts and product offerings aresubject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms & Conditionsof Sales
Sales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made onlyon the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale isexpressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio andKnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller.These terms and conditions supersede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotationsexpire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have enteredinto the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted inaccordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they wereoriginated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after orderentry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no othercharges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms of Payment Payment for one hundred percent (100%) of the net order amount (including any applicable shipping and handling fee) is due within thirty (30) days of the dateof invoice, which is generally issued upon shipment. In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days ofreceipt of Product, only that portion may be deducted and the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at thetime of order placement, with the remainder due within thirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and chargesfor inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at timeof order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to theoutstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees andcosts.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes andCancellation
Standard purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates.Expenses incurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs,may not be canceled.QuickShip orders may not be changed or canceled without Knoll’s authorization. In the event of Muuto order changes, 25% payment of original net orderamount is required for changes incurring the week the order was entered. 100% payment of original net order amount is required for changes incurring the weekthe order is scheduled to ship. If Muuto is ordered on QuickShip, the QuikShip policy supersedes.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Prepaid For standard orders, freight is prepaid and included in the price of all Knoll Office and KnollStudio Products, except KnollTextiles and Muuto, within the 48contiguous United States for orders placed with Knoll, Inc. and within Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland fororders placed with Knoll North America Corp. Packing is tested for rigorous motion and transportation but is not guaranteed to protect furniture from allconditions. If special packaging is required for any reason, please consult with your sales representative or dealer. Seller shall select the method of shipmentand routing. Freight for all KnollTextiles orders is prepaid and added to the invoice.Freight for all Muuto orders must be specified at time of order placement and added to the PO.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Orders for QuickShip product shipping direct parcel or White Gloveare subject to additional shipping and handling charges and must be paid by Purchaser. Purchaser will be billed for the differential cost of any special servicesin excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra,export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery tocarrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, orshould be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shallconstitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for anyother claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaserfor such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportationrelated claims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selling Policy
318February 15, 2022
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but notlimited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service.All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currentlyoffered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the originalSeller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests adelay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order isready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparationfor storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to thePurchaser upon delivery of the Product into storage.
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material toSeller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements ofUnderwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of theprocedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance,condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for anydamages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials,during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Sellershall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.
Product and Period of Warranty
Lifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted,Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2Veneer Front Storage, digital locks, upholstery, textiles and leathers, special or custom products, see below), Islands Collection table structure, legs, andlaminate worksurfaces; and Wexby mobile bin.
12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (exceptseating upholstery, textiles, leathers and finishes, see below).
10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces,Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, WoodCasegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra SapperMonitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric boardtextiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structuralcomponents, KnollStudio Pixel and Propeller, Tone bases and k.screens, and dealer-purchased non BIFMA-certified Muuto products.
5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts and plywood, Currents handcrank, KnollStudio (excluding textiles, leather and outdoor finishes), LSM, Pixel Lounge, Rockwell Unscripted wire bases,KnollExtra CPU holders and all universal storage drawers, and Power Collection, k.bench (except changes in finish, see below) and k.stand bases (exceptchanges in finish, see below), Islands Collection veneer worksurfaces, operational parts, wide grommet lid, castors, glides and electrical; and dealer-purchasednon BIFMA-certified Muuto products.
3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles andSmokador Collection leathers, KnollExtra Pop Up Screens, k.screen (except cork and PET), and retailer-purchased Muuto products.
2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product.
1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods, upholstered surfaces, KnollStudio, textiles,leathers and outdoor product finishes, Pixel Lounge fabric, k. lounge upholstery and k. lounge fabric, Rockwell Unscripted fabric and accessories, k.screen corkand PET.
This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable
warranties).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of thecolors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OFDEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, with
Selling Policy
319February 15, 2022
respect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, act
of any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonablecontrol. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Productor cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser,and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or acontributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made allpayments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit orproceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.
The foregoing indemnity does not apply to the following:
• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACHOF THIS AGREEMENT.
Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into betweenthe parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
Selling Policy
320February 15, 2022
KnollKey Lock Program
KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.
Knoll furniture can be ordered keyed-alike or random keyed. Key-alikeand random keying instructions cannot be mixed on any single order. Onlyone of the two instructions can be used on an individual order. When anorder is submitted with mixed (key-alike and random) instructions, Knollwill release the order as key-alike only and lock cores will have to bespecified separately.
Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.
Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.
There is no charge for key-alike orders if placed with the furniture order.
IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.
If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.
Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.
KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.
Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.
Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.
Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.
How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.
Step 1 - Using the project floorplan, count the number of locks in eachworkstation.
Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.
5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station
Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.
Qty Pattern # Description Unit List Ext. List
5
Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix for thenumber of locks for that group (i.e., for 2 locks per station, add the suffix‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
Step 5 - Repeat for other groups.
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
3 KSPEC 4 Set of 4 cores/keys N / C N / C
2 KSPEC 5 Set of 5 cores/keys N / C N / C
Your Key instructions are complete.
Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom Product Development.For additions to existing installations, specify desired key numbers inthe description.
Service PartsPattern # Description List Price
KKEY_ _ _ Shrouded Key
Specify key number desired
$10
KBLANK Shrouded Key Blank $10
KSPECB_ _ _ Retrofit Universal Core/Key
Specify key number desired
$22
KCHANGE Change Key $10
HLKRKMASTER* Master Key $10
*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.
321
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
322