Kleb- und Dichtstoffe Lacke Polyurethan Kosmetik ...€¦ · Safic-Alcan Deutschland GmbH, Bad Kreuznach Das Unternehmen wurde im Jahre 1972 von J.E. Göbel und W. Pfrengle mit dem

Gummi

Kleb- und Dichtstoffe

Lacke

Polyurethan

Kosmetik

Nahrungsergänzungsmittel

Pharmazie

Unsere Standorte

Safi c-Alcan SAS3 rue Bellini 92806 PUTEAUX CEDEX FRANCE Phone: +33 1 46 92 64 64 Fax: +33 1 47 78 88 13 http://www.safi c-alcan.fr/

Markets:- Rubber - Paints, Inks and Varnishes - Adhesives - Thermoplastics - Polyurethanes - Pharmaceuticals - Cosmetics - Synthesis - Detergents - Food & Nutraceuticals

Safi c-Alcan Italia S.p.A.Via Dei Pioppi, 1820024 GARBAGNATE MILANESE ITALY Phone: +39 02 99 02 02 05 Fax: +39 02 99 52 891 http://www.safi c-alcan.it/

Markets:- Rubber- Adhesives - Thermoplastics - Polyurethanes - Pharmaceuticals - Cosmetics - Synthesis

Safi c-Alcan Deutschland GmbH Wolfsheimer Strasse 1 D-55543 BAD KREUZNACH GERMANY Phone: +49 67 17 94 61 30 Fax: +49 67 14 83 45 24 http://www.safi c-alcan.de/

Markets:- Rubber- Thermoplastics - Pharmaceuticals - Cosmetics - Nutraceuticals

Safi c-Alcan Especialidades Calle Rocafort, 241-243 08029 BARCELONA SPAIN Phone: +34 93 322 04 53 Fax: +34 93 410 69 78 http://www.safi c-alcan.es/

Markets:- Rubber- Paints, Inks and Varnishes - Adhesives - Thermoplastics - Polyurethanes - Pharmaceuticals - Cosmetics - Detergents - Food & Nutraceuticals

Safi c-Alcan UK Ltd 812 Fountain CourtBirchwood Boulevard WARRINGTON WA3 7QZUNITED KINGDOMPhone: +44 1925 848 135 Fax: +44 1925 848 119 http://www.safi c-alcan.co.uk/

Markets: - Rubber- Adhesives - Thermoplastics - Pharmaceuticals - Cosmetics

Safi c-Alcan Benelux S.A./N.V.Neringstraat, n°11 B-1840 LONDERZEEL BELGIUM Phone: +32 52 30 36 42 Fax: +32 52 30 93 27

Markets:- Rubber- Paints, Inks and Varnishes - Adhesives - Thermoplastics - Pharmaceuticals - Cosmetics - Synthesis - Nutraceuticals

2

Unsere Standorte

Safi c-Alcan SAS3 rue Bellini 92806 PUTEAUX CEDEX FRANCE Phone: +33 1 46 92 64 64 Fax: +33 1 47 78 88 13 http://www.safi c-alcan.fr/

Markets:- Rubber - Paints, Inks and Varnishes - Adhesives - Thermoplastics - Polyurethanes - Pharmaceuticals - Cosmetics - Synthesis - Detergents - Food & Nutraceuticals

Safi c-Alcan Italia S.p.A.Via Dei Pioppi, 1820024 GARBAGNATE MILANESE ITALY Phone: +39 02 99 02 02 05 Fax: +39 02 99 52 891 http://www.safi c-alcan.it/

Markets:- Rubber- Adhesives - Thermoplastics - Polyurethanes - Pharmaceuticals - Cosmetics - Synthesis

Safi c-Alcan Deutschland GmbH Wolfsheimer Strasse 1 D-55543 BAD KREUZNACH GERMANY Phone: +49 67 17 94 61 30 Fax: +49 67 14 83 45 24 http://www.safi c-alcan.de/

Markets:- Rubber- Thermoplastics - Pharmaceuticals - Cosmetics - Nutraceuticals

Safi c-Alcan Especialidades Calle Rocafort, 241-243 08029 BARCELONA SPAIN Phone: +34 93 322 04 53 Fax: +34 93 410 69 78 http://www.safi c-alcan.es/

Markets:- Rubber- Paints, Inks and Varnishes - Adhesives - Thermoplastics - Polyurethanes - Pharmaceuticals - Cosmetics - Detergents - Food & Nutraceuticals

Safi c-Alcan UK Ltd 812 Fountain CourtBirchwood Boulevard WARRINGTON WA3 7QZUNITED KINGDOMPhone: +44 1925 848 135 Fax: +44 1925 848 119 http://www.safi c-alcan.co.uk/

Markets: - Rubber- Adhesives - Thermoplastics - Pharmaceuticals - Cosmetics

Safi c-Alcan Benelux S.A./N.V.Neringstraat, n°11 B-1840 LONDERZEEL BELGIUM Phone: +32 52 30 36 42 Fax: +32 52 30 93 27

Markets:- Rubber- Paints, Inks and Varnishes - Adhesives - Thermoplastics - Pharmaceuticals - Cosmetics - Synthesis - Nutraceuticals

Safic-Alcan Portugal Lda Via Central de Milheiros, n°862 4475-330 MAIA PORTUGAL Phone: +351 22 961 97 00 Fax: +351 22 960 01 31 http://www.safic-alcan.pt/ Markets: - Rubber - Paints, Inks and Varnishes - Adhesives - Thermoplastics - Polyurethanes - Cosmetics - Detergents

Safic-Alcan Romania SRL 32, Regina Maria Blvd 1st fl., Room 207 Sector 4, BUCHAREST ROMANIAPhone: +40 21 405 13 10 Fax: +40 21 405 13 02 http://www.safic-alcan.ro/ Markets:- Rubber - Adhesives - Thermoplastics - Polyurethanes

SAFIC-ALCAN Adriatic d.o.o.UROŠA MARTINOVICA 5/50 11070 Belgrade SERBIA Phone: +381 642 429 789 Markets:- Rubber - Paints, Inks and Varnishes - Adhesives and Sealants - Thermoplastics

Necarbo BVNoorderkade 28 1948 NR Beverwijk Postbus 621 1940 AP Beverwijk NETHERLANDSPhone: +31 251 278300 Fax: +31 251 214471 http://www.necarbo.com/ Markets: - Paints, Inks and Varnishes - Water Treatment - Adhesives and Sealants - Construction - Floor coverings and textiles - Industrial Plastics - Life Science

Bim Sifram Group SAS 3, rue Bellini 92806 PUTEAUX FRANCE Phone : +33 1 46 92 74 38 Fax: +33 1 46 92 74 47 http://www.bimsifram.fr/

Safic-Alcan Cesko s.r.o. Jamborova 32, 615 00 Brno CZECH REPUBLIC Phone: +420 511 110 150 Fax: +420 910 808 193 http://www.safic-alcan.cz/ Markets:- Rubber - Thermoplastics - Polyurethanes - Adhesives - Pharmaceuticals - Cosmetics

Chemspec, Ltd 1559 Corporate Woods Parkway Suite 150 Uniontown OH 44685 U.S.A Phone: +1 330 364 42 00 Fax: +1 330 364 42 22 http://www.chemspecltd.com/ Markets: - Rubber - Thermoplastics - Inks - Sealants

Safic-Alcan Nordic AB Faktorvägen 9 S-434 37 KUNGSBACKA SWEDENPhone: + 46/300.732.50 Fax: + 46/300.732.51 http://www.safic-alcan.se/ Markets:- Rubber - Thermoplastics

Necarbo (Middle East) B.V.P.O. Box 18620 Jebel Ali Free Zone Dubai UNITED ARAB EMIRATESPhone: +971 4 8816492 Fax: +971 4 8816496 http://www.necarbo.com/ Markets: - Paints, Inks and Varnishes - Adhesives and Sealants - Construction - Floor coverings and textiles

Sichuan Huafamei Enterprise Co., Ltd 2 Floor Block A,Huaxi Building, 5 Linyin Road, CHENGDU CHINAPhone: +86 28 86181366 202 Fax: +86 28 85449790 http://www.huafamei.com/

InterplastIkitelli Organize Sanayi Bölgesi Eskoop Sanayi Sitesi B1 Blok N°79 PK:34606 IKITELLI Istanbul TURKEY Phone: +90 212 549 6950 Fax: +90 212 549 1834 http://www.Interplast.com.tr/ Marchés:- Rubber - Thermoplastics

Safic-Alcan Polska Sp z o.o. ul. Rzymowskiego 53 02-697 WARSAW POLAND Phone: +48 22 375 17 10 http://www.safic-alcan.pl/ Markets: - Rubber - Adhesives - Thermoplastics - Cosmetics

LLC "SAFIC-ALCAN UKRAINE" Office 507/4 Bogdana Khmelnitskogo str. 16-22 Kyiv, 01030 UKRAINEPhone: +38 050 418 50 37 Fax: +38 044 383 98 85 Markets:- Rubber - Paints, Inks and Varnishes - Construction - Thermoplastics

SAFIC-ALCAN CHIMSNAB EAD”HeadquarterEastern storage area, 3 Acad. Mihail Arnaudov Str Ruse 7000, PO box 516, BULGARIAPhone: +359 82 842043 Fax: +359 82 845303 Business Park Mladost 4, 87 Alexander Malinov Blvd., office 9 Sofia 1715 Phone: +359 2 8840630 Fax: +359 2 8840640 Markets: - Food - Coatings - Rubber - Thermoplastics - Cosmetics - Pharmaceuticals

Necarbo (Asia) Sdn BhdPhileo Damansara 1 Off Jalan Damansara 46530 Petaling Jaya Selangor Darul Ehsan MALAYSIA Phone: +603 76661183 Fax: +603 76609393 http://www.necarbo.com/ Markets: - Paints, Inks and Varnishes - Adhesives and Sealants - Construction - Floor coverings and textiles

Laserson S.AB.P. 57 - Parc d’Activités Sudessor 6 Avenue des Grenots 91151 ETAMPES CEDEX FRANCE Phone: +33 1 69 16 82 00 Fax: +33 1 64 94 98 97 http://www.safic-alcan.fr/ Markets:- Cosmetics

3

4

Safic-Alcan Deutschland GmbH, Bad Kreuznach ..................................................................................................... 5

Unser Qualitätsmanagement und Engagement in REACH & HSE ..................................................................... 6

MLPC International - Beschleuniger, Verzögerer, Alterungsschutzmittel ...............................................7 – 10

NANOCYL® - mehrwandige Kohlenstoffnanoröhrchen ....................................................................................... 11

SILOX - Zinkoxide .......................................................................................................................................................12 – 13

ARKEMA - LUPEROX - organische Peroxide ......................................................................................................14 – 15

DuPont - VAMAC - Ethylen-Acrylat - Kautschuk .....................................................................................................16

ARLANXEO - KELTAN - EPDM .........................................................................................................................................17

EVONIK - Ultrasil®, Coupsil®, Si® - Kieselsäuren + Silane ................................................................................18 – 19

SARTOMER - Acrylat- und Methacrylat Monomere - Coagenzien zur perox. Vernetzung ............. 20 – 21

CRAY VALLEY - Hydrocarbon Specialty Chemicals ........................................................................................22 –25

DOW - Gummi - Metall - Haftmittel ................................................................................................................... 26 – 29

CHEMOURS - Fluorchemikalien ........................................................................................................................... 30 – 33

Emery Oleochemicals - synthetische Weichmacher .................................................................................... 34 – 35

SI Group - Vernetzer-, Klebrigmacher & Verstärkerharze ........................................................................... 36 – 42

ORION Engineered Carbons ................................................................................................................................. 43 – 45

ADDIVANT - Alterungsschutzmittel ................................................................................................................... 46 – 47

TSE Industries Inc. - walzbares Polyurethan .................................................................................................... 48 – 49

KEMI - Trennmittel für die Gummiindustrie .................................................................................................... 50 – 51

Safic-Alcan ................................................................................................................................................................... 52 – 66

Inhaltsverzeichnis

Safic-Alcan Deutschland GmbH, Bad Kreuznach Das Unternehmen wurde im Jahre 1972 von J.E. Göbel und W. Pfrengle mit dem Ziel gegründet, ein zuver-lässiger und potenter Lieferant für die kautschukverarbeitende Industrie zu sein. Ende 1998 übernahm Safic-Alcan S.A., Paris die Firma Göbel + Pfrengle GmbH. Aufbauend auf einer soliden Geschäftsführung der vergangenen Jahre ist das Ziel der Safic-Alcan Deutsch-land GmbH, mit einer stetig erweiterten Produktpalette auf dem deutschen Markt zu expandieren. So be-liefern wir heute neben dem Geschäftsfeld Kautschukindustrie ebenfalls die Bereiche Kleben und Dichten, Lacke und Farben, Polyurethan-Industrie, Life Science (Kosmetik & Pharma) mit unseren Rohstoffen.

Unsere „Produktpalette Life Science“ umfasst die folgenden Bereiche: • Rohstoffe für die Körperpflege- und Kosmetikindustrie • Rohstoffe für Nahrungsergänzung, Health + Fitness sowie Spezialitäten • pharmazeutische Hilfs- und Wirkstoffe für den Human- und Veterinärbereich • Zwischenprodukte für die chemische Synthese Wir stehen für Umweltschutz, Wachstum und Gewinn, um unserem Unternehmen und den Mitarbeitern, aber auch unseren Kunden, die erforderliche Sicherheit und Kontinuität in wirtschaftlicher Verantwortung und Zuverlässigkeit zu geben.

5

Das Unternehmen wurde im Jahre 1972 von J.E. Göbel und W. Pfrengle mit dem Ziel gegründet, ein zuver-lässiger und potenter Lieferant für die kautschukverarbeitende Industrie zu sein.

Ende 1998 übernahm Safic-Alcan S.A., Paris die Firma Göbel + Pfrengle GmbH. Aufbauend auf einer soliden Geschäftsführung der vergangenen Jahre ist das Ziel der Safic-Alcan Deutschland GmbH, mit einer stetig erweiterten Produktpalette auf dem deutschen Markt zu expandie-ren. So beliefern wir heute neben dem Geschäftsfeld Kautschukindustrie ebenfalls die Bereiche Kleben und Dichten, Lacke und Farben, Polyurethan-Industrie, Kunststoffe (Compounds & Additive), Life Science (Kosmetik & Pharma) mit unseren Rohstoffen.

Safic-Alcan Deutschland GmbH, Bad Kreuznach

Unser Qualitätsmanagement und Engagement in REACH & HSE Bei SAFIC ALCAN stehen die Bedürfnisse unserer Kunden und Lieferanten im Vordergrund. Gemeinsam finden wir für jede individuelle Herausforderung die passende Lösung in bester Qualität.

Denn im Interesse unserer Geschäftspartner liegt uns nichts so sehr am Herzen wie Qualität – diese garantiert nachhaltig die Zufriedenheit aller Beteiligten. Deswegen sind wir bereits seit 1997 nach dem Qualitätsmanagementsystem DIN EN ISO 9001 zertifiziert. Wir leben deren Inhalte aktiv und erneuern die Zertifizierung fortlaufend (*). Hiermit bringen wir zum Ausdruck, dass wir uns stets gerne an unseren hohen Ansprüchen an Produktqualität, Service, Flexibilität und Logistik messen lassen. Dasselbe Qualitätsbewusstsein dürfen Sie natürlich auch von unseren dienstleistenden Geschäftspartnern, welche auch alle gemäß DIN EN ISO 9001 zertifiziert sind, erwarten.

Qualität schließt in der heutigen Zeit auch selbstverständlich ein starkes Bewusstsein für Nachhaltigkeit und Verantwortung gegenüber der Umwelt ein. Nicht erst mit dem Inkrafttreten der REACH-Verordnung 1907/2006 am 1. Juni 2007 begannen wir uns als Distributor diesen Aufgaben zu stellen. Nachfolgend sollen nur einige Maßnahmen genannt werden, die wir hierfür durchführen: Die Safic Alcan-Gruppe berät in enger gemeinsamer Abstimmung in internationalen REACH- und CLP-Task Forces über die gemeinsame Umsetzung bei gesetzlichen Änderungen.

• Alle Produkte, die wir als Handelspartner vertreiben sind gemäß REACH-Verordnung vorregistriert. Unsere Kunden dürfen darauf vertrauen, dass wir ihnen auch nach Ablauf der letzten Registrierungsfrist 2018 ein umfassendes und breites Produktprogramm anbieten können. Unsere Produktübersicht der bereits heute schon Reach voll-registrierten Produkte erhalten Sie gerne auf Anfrage.• Wir prüfen und erstellen Sicherheitsdatenblätter und Produktetikettierungen gemäß den geltenden gesetzlichen Vorgaben.• Unsere langjährigen aber auch neue Lieferantenpartner schätzen unsere Sorgfalt bei der Erfüllung der geltenden chemikalienrechtlichen und transportrechtlichen Vorgaben. • Sehr gerne geben wir unseren Kunden Auskunft zu allen weltweit relevanten Fragestellungen rund um HSE.

* aktueller Stand: 9001:2008 vom 01.03.2016

6

Unser Qualitätsmanagement und Engagement in REACH & HSE Bei SAFIC ALCAN stehen die Bedürfnisse unserer Kunden und Lieferanten im Vordergrund. Gemeinsam finden wir für jede individuelle Herausforderung die passende Lösung in bester Qualität.

Denn im Interesse unserer Geschäftspartner liegt uns nichts so sehr am Herzen wie Qualität – diese garantiert nachhaltig die Zufriedenheit aller Beteiligten. Deswegen sind wir bereits seit 1997 nach dem Qualitätsmanagementsystem DIN EN ISO 9001 zertifiziert. Wir leben deren Inhalte aktiv und erneuern die Zertifizierung fortlaufend (*). Hiermit bringen wir zum Ausdruck, dass wir uns stets gerne an unseren hohen Ansprüchen an Produktqualität, Service, Flexibilität und Logistik messen lassen. Dasselbe Qualitätsbewusstsein dürfen Sie natürlich auch von unseren dienstleistenden Geschäftspartnern, welche auch alle gemäß DIN EN ISO 9001 zertifiziert sind, erwarten.

Qualität schließt in der heutigen Zeit auch selbstverständlich ein starkes Bewusstsein für Nachhaltigkeit und Verantwortung gegenüber der Umwelt ein. Nicht erst mit dem Inkrafttreten der REACH-Verordnung 1907/2006 am 1. Juni 2007 begannen wir uns als Distributor diesen Aufgaben zu stellen. Nachfolgend sollen nur einige Maßnahmen genannt werden, die wir hierfür durchführen: Die Safic Alcan-Gruppe berät in enger gemeinsamer Abstimmung in internationalen REACH- und CLP-Task Forces über die gemeinsame Umsetzung bei gesetzlichen Änderungen.

• Alle Produkte, die wir als Handelspartner vertreiben sind gemäß REACH-Verordnung vorregistriert. Unsere Kunden dürfen darauf vertrauen, dass wir ihnen auch nach Ablauf der letzten Registrierungsfrist 2018 ein umfassendes und breites Produktprogramm anbieten können. Unsere Produktübersicht der bereits heute schon Reach voll-registrierten Produkte erhalten Sie gerne auf Anfrage.• Wir prüfen und erstellen Sicherheitsdatenblätter und Produktetikettierungen gemäß den geltenden gesetzlichen Vorgaben.• Unsere langjährigen aber auch neue Lieferantenpartner schätzen unsere Sorgfalt bei der Erfüllung der geltenden chemikalienrechtlichen und transportrechtlichen Vorgaben. • Sehr gerne geben wir unseren Kunden Auskunft zu allen weltweit relevanten Fragestellungen rund um HSE.

* aktueller Stand: 9001:2008 vom 01.03.2016

Als 100%ige Tochtergesellschaft der ARKEMA Gruppe entwickelt und produziert MLPC International seit fast 60 Jahren Gummichemikalien, Agrochemikalien, Pharma-Intermediates, Chemikalien für Klebstoff und Lack Formu-lierungen u.v.a. basierend auf CS , CNCI und S CI Chemie.

A technology patented by Arkema/MLPC

POLYMER-BOUND COLOUR CAS

PELLETS & SLABSPOLYMER-BOUND MASTERBATCHES

CHEMICAL NAMES

NDBC 75 GA F200 (*) u NICKEL DIBUTYL DITHIOCARBAMATE (N) Dark green 13927-77-0

S 80 GA F500 u SULFUR P (N) Yellow 7704-34-9S 80 BA F500 (*) v SULFUR P (N) Yellow 7704-34-9S M300 80 GA F140 u SULFUR P (N) Yellow 7704-34-9S M300 75 BA F140 v SULFUR P (N) Yellow 7704-34-9ZnO 80 GA F140 v ZINC OXIDE P (N) White to yellowish 1314-13-2

(*) Available on request (N) for Natural(P) for Pigment

PACKAGING u 20 kg net PE bags, 640 kg net CP3 pallets (1140x1140)v 25 kg net cardboard box, 600 kg net CP3 pallets (1140x1140)

Cost saving allowed by a higher chemical efficiency:P Scrap rates reduction thanks to the high level of filtrationP Faster dispersionP Ease of handlingP Better chemical stabilityP High quality consistencyP Wider elastomers compatibility

EXTRA BENEFITS

DEFINITION OF THE PRODUCT CODIFICATION:

(**) EPDM / EVA binder

ANTIOXYDANT / ANTIOZONANT

VULCANIZING AGENT

Issue 55 - July 2017 7



CBS 80 GA F140 u N-CYCLOHEXYLBENZOTHIAZOLE-2-SULFENAMIDE P (P) Blue 95-33-0CBS 75 BA F140 v N-CYCLOHEXYLBENZOTHIAZOLE-2-SULFENAMIDE P (P) Blue 95-33-0MBT 80 GA F140 u 2-MERCAPTOBENZOTHIAZOLE P (P) Light brown 149-30-4MBT 75 BA F140 v 2-MERCAPTOBENZOTHIAZOLE P (P) Light brown 149-30-4MBTS 75 GA F140 u MERCAPTOBENZOTHIAZOLE DISULFIDE P (P) Light green 120-78-5MBTS 75 BA F140 v MERCAPTOBENZOTHIAZOLE DISULFIDE P (P) Light green 120-78-5

OTOS 75 GA F200 uN-OXYDIETHYLENETHIOCARBAMYL-N’-OXYDIETHYLENESULFENAMIDE (N) White to greyish 13752-51-7

TBBS 75 GA F200 u (N-TERT-BUTYL-2-BENZOTHIAZOLE SULFENAMIDE) P (N) Beige 95-31-8

DOTG 75 GA F140 v DIORTHOTOLYL GUANIDINE P (P) Dark grey 97-39-2DPG 80 GA F140 v DIPHENYL GUANIDINE P (P) Mauve 102-06-7DPTT 75 GA F140 u DIPENTAMETHYLENE THIURAM HEXASULFIDE (N) Beige 971-15-3MBT 80 GA F140 u 2-MERCAPTOBENZOTHIAZOLE P (P) Light brown 149-30-4MBT 75 BA F140 v 2-MERCAPTOBENZOTHIAZOLE P (P) Light brown 149-30-4MBTS 70 GA F140 u MERCAPTOBENZOTHIAZOLE DISULFIDE P (P) Light green 120-78-5MBTS 75 GA F140 u MERCAPTOBENZOTHIAZOLE DISULFIDE P (P) Light green 120-78-5MBTS 75 BA F140 v MERCAPTOBENZOTHIAZOLE DISULFIDE P (P) Light green 120-78-5TBzTD 70 GA F140 u TETRABENZYL THIURAM DISULFIDE P (N) Beige 10591-85-2TDEC 75 GA F140 (*) u TELLURIUM DIETHYL DITHIOCARBAMATE (N) Orange 20941-65-5TMTD 80 GA F140 u TETRAMETHYL THIURAM MONOSULFIDE (P) Light orange 137-26-8TMTM 80 GA F500 u TETRAMETHYL THIURAM MONOSULFIDE (N) Yellow 97-74-5ZBEC 70 GA F100 u ZINC DIBENZYL DITHIOCARBAMATE P (N) White to greyish 14726-36-4ZBEC 75 BA F140 v ZINC DIBENZYL DITHIOCARBAMATE P (N) White to greyish 14726-36-4ZDBC 80 GA F140 u ZINC DIBUTYL DITHIOCARBAMATE (N) White to greyish 136-23-2ZDBC 80 BA F140 v ZINC DIBUTYL DITHIOCARBAMATE (P) Light blue 136-23-2ZDEC 75 GA F140 u ZINC DIETHYL DITHIOCARBAMATE (N) White to greyish 14324-55-1ZDMC 75 GE F500 (*)(**) v ZINC DIMETHYL DITHIOCARBAMATE (N) White to beige 137-30-4ZDTP 50 GA F500 u ZINC ALKYL DITHIOPHOSPHATE P (N) White grey -ZDTP 50 BA F500 v ZINC ALKYL DITHIOPHOSPHATE P (N) White grey -

CTPI 80 GA F500 (*) u N-CYCLOHEXYLTHIO PHTALIMIDE P (N) Off white 17796-82-6

PBS-R 80 GA F500 uN-PHENYL-N (TRICHLOROMETHYLSULFENYL)-BENZENESULFONAMIDE P (P) Pale pink 2280-49-1

DTDM 80 GA F200 u DITHIODIMORPHOLINE (N) White to beige 103-34-4ETU 80 GA F140 u ETHYLENE THIOUREA P (N) White 96-45-7ETU 80 GA F500 u ETHYLENE THIOUREA P (N) White 96-45-7SD 75 GA F250 u BIS DIMERCAPTOTHIADIAZOLE P (N) Yellow 72676-55-2TBP 75 GA F100 u POLY-TERT-BUTYLPHENOLDISULFIDE P (N) Beige 60303-68-6TBzTD 70 GA F140 u TETRABENZYL THIURAM DISULFIDE P (N) Beige 10591-85-2TMTD 80 GA F140 u TETRAMETHYL THIURAM MONOSULFIDE (P) Light orange 137-26-8ZDTP 50 GA F500 u ZINC ALKYL DITHIOPHOSPHATE P (N) White grey -ZDTP 50 BA F500 v ZINC ALKYL DITHIOPHOSPHATE P (N) White grey -

HMT 80 GA F500 u HEXAMETHYLENE-TETRAMINE P (N) White 100-97-0

MMBI 70 GA F200 u (4 / 5)-METHYL-2-MERCAPTOBENZIMIDAZOLE P (N) Beige 53988-10-6NDBC 75 GA F200 (*) u NICKEL DIBUTYL DITHIOCARBAMATE (N) Dark green 13927-77-0


CHEMICAL NAMES

PRIMARY ACCELERATOR

SECONDARY ACCELERATOR

RETARDER

SULFUR DONOR

METHYL DONOR

ANTIOXYDANT

Issue 55 - July 2017

8













CHEMICAL NAMES

PRIMARY ACCELERATOR


RETARDER

SULFUR DONOR

METHYL DONOR

ANTIOXYDANT














CHEMICAL NAMES

PRIMARY ACCELERATOR


RETARDER

SULFUR DONOR

METHYL DONOR

ANTIOXYDANT














CHEMICAL NAMES

PRIMARY ACCELERATOR


RETARDER

SULFUR DONOR

METHYL DONOR

ANTIOXYDANT














CHEMICAL NAMES

PRIMARY ACCELERATOR


RETARDER

SULFUR DONOR

METHYL DONOR

ANTIOXYDANT


9




CHEMICAL NAMES






EXTRA BENEFITS




VULCANIZING AGENT





CHEMICAL NAMES






EXTRA BENEFITS




VULCANIZING AGENT





CHEMICAL NAMES






EXTRA BENEFITS




VULCANIZING AGENT


Nanocyl S.A. produziert am Standort Sambreville, Belgien mehrwandige Kohlenstoffnanoröhrchen u.a. für den Einsatz in Elastomeren. Für diese Anwendung stehen sowohl Produkte wie NC7000™ (MWCNT-Pulver) als auch vordispergierte Produkte mit 20% MWCNT-Gehalt auf unterschiedlichen Elastomerträgern zur Verfügung.

Mit dem Einsatz von MWCNTs lässt sich das mechanisch-physiklische Eigenschaftsprofil von Kautschukvulkanisaten bei gleichzeitiger, deutlicher Reduzierung des Rußgehaltes hinsichtlich vieler Parameter wie elektrische Leitfähigkeit, Wärmeleitfähigkeit, Abriebeigenschaften, Festigkeit, Quellverhalten etc. optimieren.

Nachstehend eine Übersicht über die für Elastomeranwendungen zur Verfügung stehenden Produkte:

MWCNT-Pulver hergestellt nach CCVD-Verfahren / 90% Reinheit / Durchmesser: 9,5nm / Länge: 4,5µm / BET: 250-300 m2/g

20% NC7000™ Masterbatche auf Vinyl-terminiertem VMQ, FKM, NBR, IR und EPDM.

ELASTOCYL™ HTV1001

ELASTOCYL™ X1-FKM MB

ELASTOCYL™ X1-NBR MB

ELASTOCYL™ X1-EPDM MB

ELASTOCYL™ X1-IR MB

10

CHEMICAL NAME UNITkg

PALLETkg COLOUR CAS EINECS

TDEC PD (*) TELLURIUM DIETHYL DITHIOCARBAMATE 20 500 Orange 20941-65-5 244-121-9ZBEC C/PD ZINC DIBENZYL DITHIOCARBAMATE P 15 300 White 14726-36-4 238-778-0ZDBC C/PD (*) ZINC DIBUTYL DITHIOCARBAMATE 20 500 White 136-23-2 205-232-8ZDEC C/PD ZINC DIETHYL DITHIOCARBAMATE 20 500 White 14324-55-1 238-270-9

DPTT C/PD DIPENTAMETHYLENE THIURAM HEXASULFIDE 20 500 Beige 971-15-3 213-537-2TBzTD C/PD TETRABENZYL THIURAM DISULFIDE P 20 500 Beige 10591-85-2 404-310-0TMTM C TETRAMETHYL THIURAM MONOSULFIDE 20 500 Yellow 97-74-5 202-605-7

DOTG C DIORTHOTOLYL GUANIDINE P 20 400 White to pink 97-39-2 202-577-6DPG C/GC/PD DIPHENYL GUANIDINE P 20 500 White to pink 102-06-7 203-002-1

DATU LI (*) BLEND OF DIALKYL THIOUREAS P 200 800 Pale yellow 930-28-57 296-749-8DBTU CRA DIBUTYL THIOUREA P 20 500 White 109-46-6 203-647-6DETU CR DIETHYL THIOUREA P 20 500 White 105-55-5 203-308-5DPTU PD DIPHENYL THIOUREA P 20 400 White 102-08-9 203-004-2ETU C ETHYLENE THIOUREA P 20 500 White 96-45-7 202-506-9

MMBI PD (*) (4 / 5)-METHYL-2-MERCAPTOBENZIMIDAZOLE P 20 500 Beige 53988-10-6 258-904-8

BQD 30 DS (*) PARABENZOQUINONE-DIOXIME P 20 500 Grey to Ochre 105-11-3 203-271-5BQD HU (*) PARABENZOQUINONE-DIOXIME P 65 325 Grey to Ochre 105-11-3 203-271-5DTDM C/PD DITHIODIMORPHOLINE 20 500 Off white 103-34-4 203-103-0NITROSO HU (*) N-NITROSODIPHENYLAMINE 25 400 Brown 86-30-6 201-663-0PPDN 30 DX POLY-PARADINITROSOBENZENE P 50/175 400/700 Brown 9003-34-3 203-272-0PPDN 30 NDX POLY-PARADINITROSOBENZENE P 50/175 400/700 Brown 9003-34-3 203-272-0PPDN 35 HU POLY-PARADINITROSOBENZENE P 100 400 Brown 9003-34-3 203-272-0SD C BIS DIMERCAPTOTHIADIAZOLE P 20 500 Yellow 72676-55-2 276-763-0(*) Available on request

PD : non coated powder C : oil coated powder GR : granules GC : oil coated granules CR : crystals CRA : crystals with anti-caking agent DS : dispersion in the quartz-kaolinite DX : dispersion in the xylene HU : humid LI : liquid

CHEMICAL NAME UNITkg

PALLETkg COLOUR CAS EINECS

VULTAC 3 POLY-TERT-AMYLPHENOLDISULFIDE P 25/900 450/900Reddish-brown to

dark brown pastilles

68555-98-6 Conforms

VULTAC 5 MIXTURE OF POLY-TERT-AMYLPHENOLDISULFIDE AND SILICA GEL P 15 405 Beige free flowing

powder 68555-98-9 Conforms

VULTAC 710 MIXTURE OF PARA TERTIOAMYLPHENOL DISULFIDE AND STEARIC ACID P 25 450 Brown greyish

pastilles 68555-98-9 Conforms

VULTAC TB7 POLY-TERT-BUTYLPHENOLDISULFIDE P 25/900 450/900 Yellow to light brown pastilles 60303-68-6 Conforms

VULTAC TB710 MIXTURE OF POLY-TERT-BUTYLPHENOLDISULFIDE AND STEARIC ACID P 25 450

Beige-brown to dark brown

pastilles60303-68-6 Conforms

For other thioureas, please contact us

EKALANDTM & VULTAC® RANGE FORRUBBER APPLICATION

DITHIOCARBAMATES

THIURAMS

GUANIDINES

THIOUREAS

ANTIOXIDANTS

MISCELLANEOUS


Nanocyl S.A. produziert am Standort Sambreville, Belgien mehrwandige Kohlenstoffnanoröhrchen u.a. für den Einsatz in Elastomeren. Für diese Anwendung stehen sowohl Produkte wie NC7000™ (MWCNT-Pulver) als auch vordispergierte Produkte mit 20% MWCNT-Gehalt auf unterschiedlichen Elastomerträgern zur Verfügung.

Mit dem Einsatz von MWCNTs lässt sich das mechanisch-physiklische Eigenschaftsprofil von Kautschukvulkanisaten bei gleichzeitiger, deutlicher Reduzierung des Rußgehaltes hinsichtlich vieler Parameter wie elektrische Leitfähigkeit, Wärmeleitfähigkeit, Abriebeigenschaften, Festigkeit, Quellverhalten etc. optimieren.

Nachstehend eine Übersicht über die für Elastomeranwendungen zur Verfügung stehenden Produkte:

MWCNT-Pulver hergestellt nach CCVD-Verfahren / 90% Reinheit / Durchmesser: 9,5nm / Länge: 4,5µm / BET: 250-300 m2/g

20% NC7000™ Masterbatche auf Vinyl-terminiertem VMQ, FKM, NBR, IR und EPDM.

ELASTOCYL™ HTV1001

ELASTOCYL™ X1-FKM MB

ELASTOCYL™ X1-NBR MB

ELASTOCYL™ X1-EPDM MB

ELASTOCYL™ X1-IR MB

11

Technische InformationZinkoxide von Silox S.A. Die SILOX Zinkoxide werden von der Silox S.A., B-4480 in Engis/ Belgien, nach einemteilweise neuartigen, patentierten Verfahren, aus über chemische Fällung gewonnenem,hochreinen Zinkhydroxid hergestellt.

Durch eine gezielte Steuerung von Brenntemperatur und Brenndauer lassen sich ZnO Qualitätenmit unterschiedlicher Aktivität herstellen. Maßstab hierfür ist die spezifische(BET-)Oberfläche, welche von min. 5 m2/g bis über 40 m2/g eingestellt werden kann.

Wenn man bedenkt, dass viele auf dem Markt befindlichen ZnO-Qualitäten Oberflächen vonnur ca. 2 - 4 m2/g besitzen, dann ist leicht ersichtlich, dass die in der Gummiindustrie ammeisten verwendete Qualität SILOX 2 C mit einer Oberfläche von 5 - 8 m2/g bereits eineBesonderheit darstellt und bezüglich Aktivität diesen Qualitäten deutlich überlegen ist.

Die große Oberfläche der SILOX-Zinkoxide ist aber nicht das einzige Merkmal, wodurch sichdie Produkte von ihren Wettbewerbern unterscheiden. Ebenso wichtig ist die Tatsache, dassSILOX aus kugelförmigen Teilchen besteht, im Gegensatz zu vielen anderenZinkoxiden, die mehr oder weniger hohe Anteile von nadelförmigen Kristallen besitzen,wodurch bei dynamisch beanspruchten Teilen Rissbildung ausgelöst werden kann.

Hieraus ergeben sich folgende Vorteile für den Einsatz von SILOX in Gummimischungen:

• außergewöhnlich gutes Fließverhalten• sehr schnelle und gute Verteilung in den Mischungen• problemlose Silierung und pneumatische Förderung über weite Strecken• Granulierung und Oberflächenbehandlung nicht erforderlich

Nicht zuletzt nehmen die SILOX Zinkoxide auch eine Sonderstellung hinsichtlich der äußerstgeringen Gehalte an Blei und Cadmium ein. Die diesbezüglichen Forderungen der Abnehmervon Gummiartikeln sind in den letzten Jahren deutlich schärfer geworden und dürften auchweiterhin ein wesentliches Merkmal von Spezifikationen sein.

12

Technische InformationZinkoxide von Silox S.A. Die SILOX Zinkoxide werden von der Silox S.A., B-4480 in Engis/ Belgien, nach einemteilweise neuartigen, patentierten Verfahren, aus über chemische Fällung gewonnenem,hochreinen Zinkhydroxid hergestellt.

Durch eine gezielte Steuerung von Brenntemperatur und Brenndauer lassen sich ZnO Qualitätenmit unterschiedlicher Aktivität herstellen. Maßstab hierfür ist die spezifische(BET-)Oberfläche, welche von min. 5 m2/g bis über 40 m2/g eingestellt werden kann.

Wenn man bedenkt, dass viele auf dem Markt befindlichen ZnO-Qualitäten Oberflächen vonnur ca. 2 - 4 m2/g besitzen, dann ist leicht ersichtlich, dass die in der Gummiindustrie ammeisten verwendete Qualität SILOX 2 C mit einer Oberfläche von 5 - 8 m2/g bereits eineBesonderheit darstellt und bezüglich Aktivität diesen Qualitäten deutlich überlegen ist.

Die große Oberfläche der SILOX-Zinkoxide ist aber nicht das einzige Merkmal, wodurch sichdie Produkte von ihren Wettbewerbern unterscheiden. Ebenso wichtig ist die Tatsache, dassSILOX aus kugelförmigen Teilchen besteht, im Gegensatz zu vielen anderenZinkoxiden, die mehr oder weniger hohe Anteile von nadelförmigen Kristallen besitzen,wodurch bei dynamisch beanspruchten Teilen Rissbildung ausgelöst werden kann.

Hieraus ergeben sich folgende Vorteile für den Einsatz von SILOX in Gummimischungen:

• außergewöhnlich gutes Fließverhalten• sehr schnelle und gute Verteilung in den Mischungen• problemlose Silierung und pneumatische Förderung über weite Strecken• Granulierung und Oberflächenbehandlung nicht erforderlich

Nicht zuletzt nehmen die SILOX Zinkoxide auch eine Sonderstellung hinsichtlich der äußerstgeringen Gehalte an Blei und Cadmium ein. Die diesbezüglichen Forderungen der Abnehmervon Gummiartikeln sind in den letzten Jahren deutlich schärfer geworden und dürften auchweiterhin ein wesentliches Merkmal von Spezifikationen sein.

ZnO SILOX Typenübersicht

SILOX 2 C Allzwecktype für Gummi- und chemische Industrie BET 5 - 8 m2/g

SILOX HR 10 Zinkoxid mit hoher Aktivität für besondere Anforderungen in der GummiindustrieBET min.10,0 m2/g

SILOX HR 30 Zinkoxid hoher Aktivität, ermöglicht reduzierten Einsatz gegenüber handelsüblichen ZnO-QualitätenBET min. 30 m2/g

SILOX ACTIF Zinkoxid für höchste Ansprüche speziell für Profilherstellung und LebensmittelqualitätBET 40 - 45 m2/g

SILOX ACTIF FF aktives Zinkoxid, frei fließend

• verbessertes Fließverhalten• präziseres Dosieren• staubfrei• verbesserte Dispergierung i.d. Kautschukmatrix• verminderte Formverschmutzung• bessere Alterungsbeständigkeit• verminderte Reversion

ZnO E 80 (SILOX 2 C) polymergebundenes Granulat mit 80 % SILOX 2 C. Absolut staubfrei, schnelle und beste Verteilung

ZnO SILOX ACTIF E 80 polymergebundenes Granulat mit 80 %SILOX ACTIF

13

The Arkema group is one of the main global producers of organic peroxides. Its expertise also extend to glass coatings, additives for PVC, catalysts for synthesis in fine chemicals, polyester resins and specialty epoxides.The Organic peroxides activity, headquartered in King of Prussia (United States), operates facilities throughout the world. Its products, services and technical support are available to customers in Europe, North America, Asia, Africa and the Middle East.

Arkema is building the future of the chemical industry using a responsible, innovation-based approach.

France’s leading chemicals producer, Arkema is aiming to become one of the global leaders in specialty chemicals. With its 14,000 employees and 91 industrial sites in 40 countries, Arkema has a revenue of €6.4 billion.The Arkema group was created in October 2004, following the reorganization of Total’s Chemicals branch. Thanks to innovation, targeted acquisitions and investments in emerging countries, it has become a recognized world player in the field of specialty chemicals.

FAMILY NAME CHEMICAL NAME CHEMICAL FORMULA PRODUCT NAMEPHYSICAL

FORMASSAY (%)

ACTIVE OxYgEN

CARRIER UN SADT

STORAgE TEMPERATURE PACKAgINg

Ts max Ts min

LUPEROX® F

1,3-1,4-bis(tert-butylperoxyisopropyl)benzeneCas N° 25155-25-3Molecular weight: 338.5 gMelting point: 37-54°CActive oxygen: 9.45%

LUPEROX® F Flakes solid flakes 96 min 9.1% - 3106 70°C 30°C - 20 kg bag in carton boxLUPEROX® FreeO solid flakes 96 min 9.1% - 3106 70°C 30°C - 20 kg bag in carton boxLUPEROX® MIX paste 42 3.97% - 3077 90°C 40°C - 25 kg in plastic binLUPEROX® F90P powder 90 8.2% Silica 3106 80°C 30°C - 20 kg bag in carton box

LUPEROX® FreeO-40 LUPEROX® F40PLUPEROX® F40LUPEROX® F40P-SP2

granule powdergranulepowder

40 3.8% Calcium carbonate + Silica

NRNRNR3106

80°C 30°C - 20 kg bag in carton box

LUPEROX® F40KEPLUPEROX® F40KE

powdergranule 40 3.8% Kaolin NR 80°C 30°C - 20 kg bag in carton box

LUPEROX® F40MGLUPEROX® F40MFLUPEROX® F40MG-SP

pelletsheetpellet

40 3.8% EPM NR 80°C 30°C - 25 kg bag in carton box20 kg bags in big box

LUPEROX® F40MGEVTLUPEROX® F40MFEVT

pelletsheet 40 3.8% EPM + EVA + Silica NR 80°C 30°C - 25 kg bag in carton box

20 kg bags in big boxLUPEROX® F40ED pellet

40 3.8% EPM + Calcium carbonate + Silica NR 80°C 30°C - 25 kg bag in carton box20 kg bags in big boxLUPEROX® F40EDF sheet

LUPEROX® F40M-SP pellet

LUPEROX® DCP

Dicumyl peroxideCas N° 80-43-3Molecular weight: 270,4 gMelting point: > 39°CActive oxygen: 5.92%

LUPEROX® DCP solid crystals 99 min 5.9% - 3110 80°C 30°C - 20 kg bag in carton box

LUPEROX® DC40P LUPEROX® DC40 LUPEROX® DC40P-SP2

powdergranulepowder

40 2.4% Calcium carbonate + Silica 3077 80°C 30°C - 20 kg bag in carton box

LUPEROX® DC40KEPLUPEROX® DC40KE

powdergranule 40 2.4% Kaolin 3077 80°C 30°C - 20 kg bag in carton box

LUPEROX® DC40MGLUPEROX® DC40MFLUPEROX® DC40M-SP2

pelletsheetpellet

40 2.4% EPM 3077 80°C 30°C - 25 kg bag in carton box20 kg bags in big box

LUPEROX® DC40MGFLUPEROX® DC40MG-SP2

pelletpellet 40 2.4% EPM + Calcium carbonate + Silica 3077 80°C 30°C - 25 kg bag in carton box

20 kg bags in big box

LUPEROX® DC40MGPE pellet 40 2.4% EPM + LPDE 3077 80°C 30°C - 25 kg bag in carton box20 kg bags in big box

LUPEROX® DC40PE powder 40 2.4% LPDE 3077 80°C 30°C - 25 kg bag in carton box

LUPEROX® 101

2,5-dimethyl-2,5-di(tert-butylperoxy)hexaneCas N° 78-63-7Molecular weight: 290.4 gMelting point: 8°CActive oxygen: 11.1%

LUPEROX® 101 liquid 94 min 10.4% - 3103 82°C 30°C 8°C 25 kg in plastic bin

LUPEROX® 101XLS50 powder 50 5.5% Silica 3108 75°C 30°C - 20 kg bag in carton box

LUPEROX® 101XL45LUPEROX® 101XL45-SP2 powder 45 5.0% Calcium carbonate + Silica 3108 75°C 30°C - 20 kg bag in carton box

LUPEROX® 801

Tert-butylcumylperoxideCas N° 3457-61-2Molecular weight: 208.3 gMelting point: 11.3-19.5°CActive oxygen: 7.7%


LUPEROX® 130

2,5-dimethyl-2,5-di(tertbutylperoxy)hex-3-yneCas N° 1068-27-5Molecular weight: 286,42 gActive oxygen: 11.2%Note: this product only exists as extended grade

LUPEROX® 130MO85 liquid 85 9.5% White oil 3103 90°C 30°C 8°C 25 kg in plastic bin

LUPEROX® 130XL45 powder 45 5.0% Calcium carbonate + Silica 3106 90°C 30°C - 20 kg bag in carton box

LUPEROX® 230

n-butyl-4,4-di(tert-butylperoxy)valerateCas N° 995-33-5Molecular weight: 334.4 gActive oxygen: 9.57%Note: this product only exists as extended grade

LUPEROX® 230G40 granule 40 3.8% Calcium carbonate + Sodium aluminium silicate 3108 65°C 30°C - 20 kg bag in carton box

LUPEROX® 230XL40 LUPEROX® 230XL40-SP

powder powder 40 3.8% Calcium carbonate + Silica 3108 60°C 30°C - 20 kg bag in carton box

LUPEROX® 231

1,1-di(tert-butylperoxy)-3,3,5-trimethylcyclohexaneCas N° 6731-36-8Molecular weight: 302.4 gActive oxygen: 10.58%Note: this product only exists as extended grade

LUPEROX® 231G40 LUPEROX® 231XL40

granule powder 40 4.2% Calcium carbonate + Sodium

aluminium silicate 3110 57°C 30°C - 20 kg bag in carton box

LUPEROX® 231XL40-SP powder 40 4.2% Calcium carbonate + Silica 3110 57°C 30°C - 20 kg bag in carton box

LUPEROX® DCBPDi(2,4-dichlorobenzoyl) peroxideCas N° 133-14-2Molecular weight: 380.0 gActive oxygen: 4.21%

LUPEROX® DCBP paste 50 2.1% Silicone oil 3106 60°C 35°C - 25 kg in plastic bin

Organic perOxides prOduct range fOr crOsslinking

arkeMa, innOvative cheMistry

p. 2/3 Product range for crosslinking

p. 4/5 Kinetic

p. 6/7 Processing

p. 8 Scorch protection solution

p. 9 Smell free solution

p. 10/11 Application polymers

cOntents

14

The Arkema group is one of the main global producers of organic peroxides. Its expertise also extend to glass coatings, additives for PVC, catalysts for synthesis in fine chemicals, polyester resins and specialty epoxides.The Organic peroxides activity, headquartered in King of Prussia (United States), operates facilities throughout the world. Its products, services and technical support are available to customers in Europe, North America, Asia, Africa and the Middle East.

Arkema is building the future of the chemical industry using a responsible, innovation-based approach.

France’s leading chemicals producer, Arkema is aiming to become one of the global leaders in specialty chemicals. With its 14,000 employees and 91 industrial sites in 40 countries, Arkema has a revenue of €6.4 billion.The Arkema group was created in October 2004, following the reorganization of Total’s Chemicals branch. Thanks to innovation, targeted acquisitions and investments in emerging countries, it has become a recognized world player in the field of specialty chemicals.

FAMILY NAME CHEMICAL NAME CHEMICAL FORMULA PRODUCT NAMEPHYSICAL

FORMASSAY (%)

ACTIVE OxYgEN

CARRIER UN SADT

STORAgE TEMPERATURE PACKAgINg

Ts max Ts min

LUPEROX® F

1,3-1,4-bis(tert-butylperoxyisopropyl)benzeneCas N° 25155-25-3Molecular weight: 338.5 gMelting point: 37-54°CActive oxygen: 9.45%

LUPEROX® F Flakes solid flakes 96 min 9.1% - 3106 70°C 30°C - 20 kg bag in carton boxLUPEROX® FreeO solid flakes 96 min 9.1% - 3106 70°C 30°C - 20 kg bag in carton boxLUPEROX® MIX paste 42 3.97% - 3077 90°C 40°C - 25 kg in plastic binLUPEROX® F90P powder 90 8.2% Silica 3106 80°C 30°C - 20 kg bag in carton box

LUPEROX® FreeO-40 LUPEROX® F40PLUPEROX® F40LUPEROX® F40P-SP2

granule powdergranulepowder

40 3.8% Calcium carbonate + Silica

NRNRNR3106

80°C 30°C - 20 kg bag in carton box

LUPEROX® F40KEPLUPEROX® F40KE

powdergranule 40 3.8% Kaolin NR 80°C 30°C - 20 kg bag in carton box

LUPEROX® F40MGLUPEROX® F40MFLUPEROX® F40MG-SP

pelletsheetpellet

40 3.8% EPM NR 80°C 30°C - 25 kg bag in carton box20 kg bags in big box

LUPEROX® F40MGEVTLUPEROX® F40MFEVT

pelletsheet 40 3.8% EPM + EVA + Silica NR 80°C 30°C - 25 kg bag in carton box

20 kg bags in big boxLUPEROX® F40ED pellet

40 3.8% EPM + Calcium carbonate + Silica NR 80°C 30°C - 25 kg bag in carton box20 kg bags in big boxLUPEROX® F40EDF sheet

LUPEROX® F40M-SP pellet

LUPEROX® DCP

Dicumyl peroxideCas N° 80-43-3Molecular weight: 270,4 gMelting point: > 39°CActive oxygen: 5.92%

LUPEROX® DCP solid crystals 99 min 5.9% - 3110 80°C 30°C - 20 kg bag in carton box

LUPEROX® DC40P LUPEROX® DC40 LUPEROX® DC40P-SP2

powdergranulepowder

40 2.4% Calcium carbonate + Silica 3077 80°C 30°C - 20 kg bag in carton box

LUPEROX® DC40KEPLUPEROX® DC40KE

powdergranule 40 2.4% Kaolin 3077 80°C 30°C - 20 kg bag in carton box

LUPEROX® DC40MGLUPEROX® DC40MFLUPEROX® DC40M-SP2

pelletsheetpellet

40 2.4% EPM 3077 80°C 30°C - 25 kg bag in carton box20 kg bags in big box

LUPEROX® DC40MGFLUPEROX® DC40MG-SP2

pelletpellet 40 2.4% EPM + Calcium carbonate + Silica 3077 80°C 30°C - 25 kg bag in carton box

20 kg bags in big box

LUPEROX® DC40MGPE pellet 40 2.4% EPM + LPDE 3077 80°C 30°C - 25 kg bag in carton box20 kg bags in big box

LUPEROX® DC40PE powder 40 2.4% LPDE 3077 80°C 30°C - 25 kg bag in carton box

LUPEROX® 101

2,5-dimethyl-2,5-di(tert-butylperoxy)hexaneCas N° 78-63-7Molecular weight: 290.4 gMelting point: 8°CActive oxygen: 11.1%


LUPEROX® 101XLS50 powder 50 5.5% Silica 3108 75°C 30°C - 20 kg bag in carton box

LUPEROX® 101XL45LUPEROX® 101XL45-SP2 powder 45 5.0% Calcium carbonate + Silica 3108 75°C 30°C - 20 kg bag in carton box

LUPEROX® 801

Tert-butylcumylperoxideCas N° 3457-61-2Molecular weight: 208.3 gMelting point: 11.3-19.5°CActive oxygen: 7.7%


LUPEROX® 130

2,5-dimethyl-2,5-di(tertbutylperoxy)hex-3-yneCas N° 1068-27-5Molecular weight: 286,42 gActive oxygen: 11.2%Note: this product only exists as extended grade

LUPEROX® 130MO85 liquid 85 9.5% White oil 3103 90°C 30°C 8°C 25 kg in plastic bin

LUPEROX® 130XL45 powder 45 5.0% Calcium carbonate + Silica 3106 90°C 30°C - 20 kg bag in carton box

LUPEROX® 230

n-butyl-4,4-di(tert-butylperoxy)valerateCas N° 995-33-5Molecular weight: 334.4 gActive oxygen: 9.57%Note: this product only exists as extended grade

LUPEROX® 230G40 granule 40 3.8% Calcium carbonate + Sodium aluminium silicate 3108 65°C 30°C - 20 kg bag in carton box

LUPEROX® 230XL40 LUPEROX® 230XL40-SP

powder powder 40 3.8% Calcium carbonate + Silica 3108 60°C 30°C - 20 kg bag in carton box

LUPEROX® 231

1,1-di(tert-butylperoxy)-3,3,5-trimethylcyclohexaneCas N° 6731-36-8Molecular weight: 302.4 gActive oxygen: 10.58%Note: this product only exists as extended grade

LUPEROX® 231G40 LUPEROX® 231XL40

granule powder 40 4.2% Calcium carbonate + Sodium

aluminium silicate 3110 57°C 30°C - 20 kg bag in carton box

LUPEROX® 231XL40-SP powder 40 4.2% Calcium carbonate + Silica 3110 57°C 30°C - 20 kg bag in carton box

LUPEROX® DCBPDi(2,4-dichlorobenzoyl) peroxideCas N° 133-14-2Molecular weight: 380.0 gActive oxygen: 4.21%

LUPEROX® DCBP paste 50 2.1% Silicone oil 3106 60°C 35°C - 25 kg in plastic bin

Organic perOxides prOduct range fOr crOsslinking

arkeMa, innOvative cheMistry

p. 2/3 Product range for crosslinking

p. 4/5 Kinetic

p. 6/7 Processing

p. 8 Scorch protection solution

p. 9 Smell free solution

p. 10/11 Application polymers

cOntents

15

Visit us at: vamac.dupont.com

Contact DuPont at the following regional locations:

North America +1-800-853-5515

Greater China +86-400-8851-888

Latin America +0800 17 17 15

Japan +81-3-5521-8600

Europe, Middle East, Africa +41 22 717 51 11

ASEAN +65-6586-3688

Grade ML(1+4) at 100 °C Tg (by DSC) °C1 Key Feature

Vamac® G 16.5 –30 General purpose

Vamac® GXF 17.5 –30 Dynamic fatigue resistance

Vamac® GLS 18.5 –23 Low oil swell

Vamac® HVG 26 –30 High viscosity

Vamac® Ultra IP 29 –30 Improved performance grade for molding and extrusion

Vamac® Ultra HT 29 –30 High temperature

Vamac® Ultra HT-OR 31 –24 High temperature / Oil resistance

Vamac® Ultra LS 33 –23 High viscosity / Low oil swell

Vamac® DP 22 –27 Peroxide curable dipolymer

VMX2122 28 –29 Improved processing peroxide curable dipolymer

VMX4017 11 –41 Low temperature

DuPont™ Vamac® Grades


VMX5015 67 –30 Compression molding pre-compound2

VMX5020 53 –30 Injection molding pre-compound2

VMX5315 70 –30 Steam autoclave curable pre-compound / Extrusion

VMX5394 70 –24 Steam autoclave curable pre-compound / Low Swell

DuPont™ Vamac® Pre-Compounds for High Heat Resistance

DUPONT™ VAMAC® WORKS FOR TORSIONAL DAMPERS, UNDERHOOD DUCTS, LOW-SMOKE FLOORING, AND O-RINGS

1 Tg of compounds with Vamac® may be extended typically –10 °C lower with addition of plasticizer.2 Not suitable for steam autoclave cure.

The information provided in this data sheet corresponds to DuPont knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.

The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use and disposal conditions, DuPont does not guarantee results, makes no warranties and assumes no liability in connection with any use of this information. All such information is given and accepted at the buyer’s risk. It is intended for use by persons having technical skill, at their own discretion and risk. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent.

CAUTION: Do not use DuPont materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless the material has been provided from DuPont under a written contract that is consistent with DuPont policy regarding medical applications and expressly acknowledges the contemplated use. For further information, please contact your DuPont representative. You may also request a copy of DuPont POLICY Regarding Medical Applications H-50103-5 and DuPont CAUTION Regarding Medical Applications H-50102-5.

Copyright © 2015 DuPont. The DuPont Oval Logo, DuPont™, and Vamac® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved.

(07/10) Reference number VME-A10650-00-B0715

The Keltan® portfolio consists of a broad range of global grades with a diversity of properties that off er freedom in recipe formulations, product design and processing windows. This, in turn, allows our customers to optimize between product performance and cost effi ciency.

16

Visit us at: vamac.dupont.com

Contact DuPont at the following regional locations:

North America +1-800-853-5515

Greater China +86-400-8851-888

Latin America +0800 17 17 15

Japan +81-3-5521-8600

Europe, Middle East, Africa +41 22 717 51 11

ASEAN +65-6586-3688


Vamac® G 16.5 –30 General purpose

Vamac® GXF 17.5 –30 Dynamic fatigue resistance

Vamac® GLS 18.5 –23 Low oil swell

Vamac® HVG 26 –30 High viscosity

Vamac® Ultra IP 29 –30 Improved performance grade for molding and extrusion

Vamac® Ultra HT 29 –30 High temperature

Vamac® Ultra HT-OR 31 –24 High temperature / Oil resistance

Vamac® Ultra LS 33 –23 High viscosity / Low oil swell

Vamac® DP 22 –27 Peroxide curable dipolymer

VMX2122 28 –29 Improved processing peroxide curable dipolymer

VMX4017 11 –41 Low temperature

DuPont™ Vamac® Grades


VMX5015 67 –30 Compression molding pre-compound2

VMX5020 53 –30 Injection molding pre-compound2

VMX5315 70 –30 Steam autoclave curable pre-compound / Extrusion

VMX5394 70 –24 Steam autoclave curable pre-compound / Low Swell

DuPont™ Vamac® Pre-Compounds for High Heat Resistance

DUPONT™ VAMAC® WORKS FOR TORSIONAL DAMPERS, UNDERHOOD DUCTS, LOW-SMOKE FLOORING, AND O-RINGS

1 Tg of compounds with Vamac® may be extended typically –10 °C lower with addition of plasticizer.2 Not suitable for steam autoclave cure.

The information provided in this data sheet corresponds to DuPont knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.

The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes. Since DuPont cannot anticipate all variations in actual end-use and disposal conditions, DuPont does not guarantee results, makes no warranties and assumes no liability in connection with any use of this information. All such information is given and accepted at the buyer’s risk. It is intended for use by persons having technical skill, at their own discretion and risk. Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent.

CAUTION: Do not use DuPont materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless the material has been provided from DuPont under a written contract that is consistent with DuPont policy regarding medical applications and expressly acknowledges the contemplated use. For further information, please contact your DuPont representative. You may also request a copy of DuPont POLICY Regarding Medical Applications H-50103-5 and DuPont CAUTION Regarding Medical Applications H-50102-5.

Copyright © 2015 DuPont. The DuPont Oval Logo, DuPont™, and Vamac® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved.

(07/10) Reference number VME-A10650-00-B0715CLCB = Controlled Long Chain Branching N = Narrow molecular weight distribution M = Medium molecular weight distribution

Keltan® Grades Portfolio EMEA

KELTAN®

CHARACTERISTICS AND PACKAGING

Viscosity Monomer content Other properties

Packaging

Test conditions Setpoint Ethylene content

Third Monomer Oil content Type Polymer Structure

Wrapping foil Bale Box

MU g/10 min. wt.% type – content wt. % phr

Type Color Thickness microns Weight kg Form Number bales Weight kg Supported Material

Keltan® 2450 ML(1+4) 125 °C 28 48 ENB 4,1 CLCB

LDPE transparent 50 25 Standard bale 40 1000 No Wood & cardboard

Keltan® 2470L ML(1+4) 125 °C 22 69 ENB 4,2 CLCB


Keltan® 2470S ML(1+4) 125 °C 25 69 ENB 4,2 CLCB

LDPE transparent 50 25 Quasi friable bale 40 1000 No Wood & cardboard


EVA transparent 50 25 Standard bale 40 1000 No Wood & cardboard



Keltan® 3050 ML(1+4) 100 °C 51 49 – 0,0 N

EVA transparent 70 25 Standard bale 36 900 No Cardboard

Keltan® 3250Q ML(1+4) 125 °C 33 55 ENB 2,3 N

LDPE transparent 50 25 Standard bale 36 900 No Cardboard



Keltan® 3960Q ML(1+8) 100 °C 54 56 ENB 11,0 N

LDPE transparent 50 34 Heavy bale 30 1020 No Cardboard

Keltan® 3973 ML(1+4) 125 °C 34 66 ENB 9,0 30 Clear CLCB


Keltan® 4450 ML(1+4) 125 °C 46 52 ENB 4,3 N


Keltan® 4450S ML(1+4) 125 °C 42 52 ENB 4,3 CLCB


Keltan® 4460D ML(1+4) 125 °C 46 58 DCPD 4,5 B


Keltan® 4465 ML(1+4) 125 °C 48 56 ENB 4,1 50 Clear B


Keltan® 4577 ML(1+4) 125 °C 46 66 ENB 5,1 75 Clear N


Keltan® 4869C ML(1+4) 125 °C 48 62 ENB 8,7 100 Clear CLCB


Keltan® 5260Q ML(1+4) 125 °C 55 62 ENB 2,3 N


Keltan® 5465Q ML(1+8) 150 °C 37 64 ENB 4,0 50 Clear N






Keltan® 5470C ML(1+4) 125 °C 55 66 ENB 4,6 CLCB

LDPE transparent 50 25 Friable bale 30 750 Yes Cardboard

Keltan® 5470Q ML(1+4) 125 °C 57 67 ENB 4,7 N

LDPE transparent 50 25 Friable bale 30 750 Yes Cardboard

Keltan® 6160D ML(1+4) 125 °C 63 64 DCPD 1,2 M


Keltan® 6460D ML(1+4) 125 °C 63 58 DCPD 4,5 VB


Keltan® 6471 ML(1+4) 125 °C 65 67 ENB 4,7 15 Clear N



EVA transparent 50 25 Standard bale 30 750 Yes Cardboard



Keltan® 7270Q ML(1+4) 125 °C 72 67 ENB 2,8 N



EVA transparent 50 25 Standard bale 36 900 No Cardboard


LDPE transparent 50 25 Quasi friable bale 36 900 No Cardboard


LDPE transparent 50 25 Quasi friable bale 36 900 No Cardboard



Keltan® 9650Q ML(1+8) 150 °C 60 54 ENB 6,5 N




Keltan® 0500R 190°C / 2.16 kg 11 49 – 0,0 N

– – – 22,7 Standard bale 30 681 Yes Cardboard

Keltan® 0500RS 190°C / 2.16 kg 6,5 49 – 0,0 N


Keltan® 1500R 190°C / 2.16 kg 2,55 49 – 0,0 N


B = Broad molecular weight distribution VB = Very broad molecular weight distribution

The Keltan® portfolio consists of a broad range of global grades with a diversity of properties that off er freedom in recipe formulations, product design and processing windows. This, in turn, allows our customers to optimize between product performance and cost effi ciency.

17

When it comes to rubber, we are continuously shaping our product portfolio and application knowhow to meet our customers challenges. The rubber team of Evonik is backed with a full range of silica and silane products and is ready to provide technical support to tailor-design compounds according to your specifi c needs of reinforcement.

18

When it comes to rubber, we are continuously shaping our product portfolio and application knowhow to meet our customers challenges. The rubber team of Evonik is backed with a full range of silica and silane products and is ready to provide technical support to tailor-design compounds according to your specifi c needs of reinforcement.

19

ALCANPOUDRE©

Sämtliche flüssigen Coagenzien sind auch als sog. Dry Liquids verfügbar. Diese bestehen aus 70-75% Wirkstoff + 25-30% Kieselsäure. Die Ware ist nahezu staubfrei. Für große Mischungschargen sind ebenfalls rezepturgerecht vorverwogene Lösungen möglich.

Sartomer ist ein weltweit führender Hersteller für Acrylat- und Methacrylat Monomere.

Einige dieser Acryl- und Methacrylsäureester werden in der Kautschukindustrie zur Beschleunigung und Verbesserung des physikalischen Eigenschaftsprofils von peroxidisch vernetzten Elastomeren eingesetzt. Zur Verzögerung der Anvulkanisation stehen neben den „Standard-Typen“ (SR…) auch sog. retardierte Typen (SARET…) zur Verfügung.

Da es sich meist um Flüssigkeiten handelt, bieten wir unseren Kunden auch das jeweilige Produkt als 70-75%iges „Dry Liquid“ auf Kieselsäure an (siehe „ALCANPOUDRE©“).

20

ALCANPOUDRE©

Sämtliche flüssigen Coagenzien sind auch als sog. Dry Liquids verfügbar. Diese bestehen aus 70-75% Wirkstoff + 25-30% Kieselsäure. Die Ware ist nahezu staubfrei. Für große Mischungschargen sind ebenfalls rezepturgerecht vorverwogene Lösungen möglich.

Sartomer ist ein weltweit führender Hersteller für Acrylat- und Methacrylat Monomere.

Einige dieser Acryl- und Methacrylsäureester werden in der Kautschukindustrie zur Beschleunigung und Verbesserung des physikalischen Eigenschaftsprofils von peroxidisch vernetzten Elastomeren eingesetzt. Zur Verzögerung der Anvulkanisation stehen neben den „Standard-Typen“ (SR…) auch sog. retardierte Typen (SARET…) zur Verfügung.

Da es sich meist um Flüssigkeiten handelt, bieten wir unseren Kunden auch das jeweilige Produkt als 70-75%iges „Dry Liquid“ auf Kieselsäure an (siehe „ALCANPOUDRE©“).

SARTOMER®: (METH)ACRYLATE COAGENTSSartomer® additives are (meth)acrylate based coagents used in Peroxide cured rubber to customize pro-perties such as: Processability - Crosslink density - Hardness - Mechanical properties - Cure speed - Adhesi-on - Tear strength, …

LIQUID MONOMERS

SARET®: SARTOMER COAGENT WITH SCORCH PROTECTING TECHNOlOGYSaret® are unique scorch protected Coagents that allow optimized rubber performances with Scorch Safety.

21

CRAY VALLEY produziert Zinksalze der Acryl- und Methacrylsäure, fl üssige Polybutadiene, petrostämmige Harze für die Gummi-, Farben- und Lack-, Composite- und Klebstoffi ndustrie.

Liquid Polybutadienes

Product Description Typical Properties Availability

Molecular Weight (Mn, g/mol) 1,2 Vinyl (%) Viscosity (cps) Tg (˚C) MA (/chain) -OH (/chain) Epoxy

(eq. wt.)

Ricon Low Vinyl Content

Ricon 130 Homopolymer of Butadiene 2,500 28 750 @ 25 ˚C -86 0.89 -- -- -- US, EU, Asia


Ricon 134 Homopolymer of Butadiene 8,000 28 15,000 @ 25 ˚C -81 0.89 -- -- -- US, EU, Asia

High Vinyl Content

Ricon 150 (Ricon 150D) Homopolymer of Butadiene (Dry Liquid 70% Active) 3,900 70 40,000 @ 25 ˚C -40 0.89 -- -- -- US, EU, Asia






Styrene-Butadiene Copolymers

Ricon 100 Butadiene-Styrene Random Copolymer (25% Styrene) 4,500 70 40,000 @ 45 ˚C -15 0.90 -- -- -- US, EU, Asia



Ricon 250 Butadiene-Styrene Random Copolymer (35% Styrene) 5,300 70 900 @ 25 ˚C -- 0.90 -- -- -- US, EU, Asia

Ricon MA, Ricobond Low Vinyl Content

Ricon 130MA8 Maleinized Polybutadiene 3,100 28 6500 @ 25 ˚C -82 0.90 2 -- -- US, EU, Asia

Ricon 131MA5 Maleinized Polybutadiene 4,700 28 15,000 @ 25 ˚C -83 0.90 2 -- -- US, EU, Asia

Ricobond 1731 (Ricobond 1731HS) Maleinized Polybutadiene (Dry Liquid 69% Active) 5,400 28 50,000 @ 45 ˚C -72 0.91 9 -- -- US, EU, Asia

High Vinyl Content


Krasol* Diol

Krasol LBH 2000 Hydroxyl-Terminated Polybutadiene 2,100 65 13,000 @ 25 ˚C -35 0.89 -- 1.9 -- US, EU, Asia

Krasol LBH-P 2000 Hydroxyl-Terminated Polybutadiene (Primary-OH) 2,100 65 13,000 @ 25 ˚C -35 0.89 -- 1.9 -- US, EU, Asia



Hydrogenated

Krasol HLBH-P2000 Hydroxyl-Terminated Hydrogenated Polybutadiene 2,100 -- 1,750 @ 60 ˚C -46 0.88 -- 1.9 -- US, EU, Asia


Poly bd* Polyol

Poly bd R-45HTLO Hydroxyl-Terminated Polybutadiene 2,800 20 5,000 @ 30 ˚C -75 0.90 -- 2.5 -- US, EU, Asia

Poly bd R-20LM Hydroxyl-Terminated Polybutadiene 1,200 20 1,400 @ 30 ˚C -70 0.91 -- 2.5 -- US, EU, Asia

Epoxidized

Poly bd 605E Epoxidized Hydroxyl-Terminated Polybutadiene 1,450 20 12,000 @ 30 ˚C -47 1.01 -- 2.5 450 US, EU, Asia22

CRAY VALLEY produziert Zinksalze der Acryl- und Methacrylsäure, fl üssige Polybutadiene, petrostämmige Harze für die Gummi-, Farben- und Lack-, Composite- und Klebstoffi ndustrie.

Liquid Polybutadienes



(eq. wt.)





High Vinyl Content
















High Vinyl Content


Krasol* Diol





Hydrogenated



Poly bd* Polyol


Poly bd R-20LM Hydroxyl-Terminated Polybutadiene 1,200 20 1,400 @ 30 ˚C -70 0.91 -- 2.5 -- US, EU, Asia

Epoxidized

Poly bd 605E Epoxidized Hydroxyl-Terminated Polybutadiene 1,450 20 12,000 @ 30 ˚C -47 1.01 -- 2.5 450 US, EU, Asia



(eq. wt.)





High Vinyl Content
















High Vinyl Content


Krasol* Diol





Hydrogenated



Poly bd* Polyol


Poly bd R-20LM Hydroxyl-Terminated Polybutadiene 1,200 20 1,400 @ 30 ˚C -70 0.91 -- 2.5 --

Epoxidized

Poly bd 605E Epoxidized Hydroxyl-Terminated Polybutadiene 1,450 20 12,000 @ 30 ˚C -47 1.01 -- 2.5 450 US, 23

Crosslinking MonomersCray Valley HSC provides a selection of metallic monomers. Straight grade and scorch retarding rubber coagent monomers are available for peroxide-cure applications, while our specialty monomers are used in a wide variety of cure systems, including accelerated sulfur vulcanization and metal oxide cure.

Our products fi nd utility in a variety of applications including tires, power transmission belts, rubber sealing systems, coatings, thermoplastics, and adhesives.

24





25

Wingtack® Resins

Cleartack® W Resins Pure monomer resins – water white color

TCV Polymer Modification

Wingtack® and Cleartack® Petroleum Hydrocarbon Resins

Wingtack® and Cleartack® Petroleum Hydrocarbon Resins

Tg(T°C) (g/mol) (%)

Wingtack® and Cleartack®Petroleum Hydrocarbon Resins

(g/mol)

Dow Automotive Systems ist ein seit vielen Jahren etablierter und führender Anbieter von Glas- und Kunststoffklebe-technologien und bietet Lösungen zur Gummi-Substrat-Haftung an, mit denen Fahrzeuge eine bessere Energieeffizienz erreichen und sicherer, stärker, leiser, sauberer, bequemer und optisch attraktiver werden. Unsere Erfahrung und vielfältigen Technologien ermöglichen es uns, auch für die schwierigsten Aufgabenstellungen eine Lösung zu finden.

Hochleistungshaftmittel ermöglichen die Haftungvon ähnlichen und unterschiedlichen Substraten bei Lagern,Buchsen, Riemen, Bremsbelägen, Scheibenprofilen und anderen Komponenten.

Für das Verbinden von Elastomeren mit Metall, technischem Kunststoffen oder anderen Elastomeren sind starke Haftmittel erforderlich. MEGUM™, THIXON™ und ROBOND™ sind Haftmittel, die speziell für bestimmte Bindeanforderungen von verschiedenen Substraten unter besonderen Umgebungsbedingungen formuliert wurden. Dow bietet eine vollständige Familie an Systemen zur Reduzierung von Emissionen an, die geringe VOC haben und HAP-konform sind. Unsere Haftmittel bieten auch unter den schwierigsten Bedingungen eine zuverlässige Haftung und eignen sich für zahlreiche Anwendungsbereiche in Fahrzeugen, u.a. für Schläuche, Lager, Riemen, Buchsen, Dichtungen und Armaturenbretter.

MEGUM™/THIXON™/ROBOND™

Gummi-Substrat-Haftmittel

Lösungen von Dow Automotive

Maßgeschneiderte Lösungen

Als global führendes Forschungs- und Technologieunternehmen bietet Dow umfassenden Service zur engen Zusammenarbeit mit unseren Kunden, um Lösungen zu finden, die eine optimale Kombination aus Material-, Prozess- und Systemkosten bieten.

Unsere Technischen Service- & Entwicklungszentren können neue Produkte und Lösungen schnell entwickeln, einen technischen Kundensupport vor Ort bieten und Ihre dringenden Anfragen umgehend beantworten. Wir sind weltweit mit Produktionsstandorten, Forschungs- und Entwicklungslabors, Lagerhäusern, Versandzentren und Verwaltungsbüros vertreten. Auf diese Weise können wir in allen wichtigen RegionenProbleme lösen, Leistungs- und Alterungstests durchführen und unsere Analysekapazitäten und Dienstleistungen bereitstellen.

26

Dow Automotive Systems ist ein seit vielen Jahren etablierter und führender Anbieter von Glas- und Kunststoffklebe-technologien und bietet Lösungen zur Gummi-Substrat-Haftung an, mit denen Fahrzeuge eine bessere Energieeffizienz erreichen und sicherer, stärker, leiser, sauberer, bequemer und optisch attraktiver werden. Unsere Erfahrung und vielfältigen Technologien ermöglichen es uns, auch für die schwierigsten Aufgabenstellungen eine Lösung zu finden.

Hochleistungshaftmittel ermöglichen die Haftungvon ähnlichen und unterschiedlichen Substraten bei Lagern,Buchsen, Riemen, Bremsbelägen, Scheibenprofilen und anderen Komponenten.

Für das Verbinden von Elastomeren mit Metall, technischem Kunststoffen oder anderen Elastomeren sind starke Haftmittel erforderlich. MEGUM™, THIXON™ und ROBOND™ sind Haftmittel, die speziell für bestimmte Bindeanforderungen von verschiedenen Substraten unter besonderen Umgebungsbedingungen formuliert wurden. Dow bietet eine vollständige Familie an Systemen zur Reduzierung von Emissionen an, die geringe VOC haben und HAP-konform sind. Unsere Haftmittel bieten auch unter den schwierigsten Bedingungen eine zuverlässige Haftung und eignen sich für zahlreiche Anwendungsbereiche in Fahrzeugen, u.a. für Schläuche, Lager, Riemen, Buchsen, Dichtungen und Armaturenbretter.

MEGUM™/THIXON™/ROBOND™

Gummi-Substrat-Haftmittel

Lösungen von Dow Automotive

Maßgeschneiderte Lösungen

Als global führendes Forschungs- und Technologieunternehmen bietet Dow umfassenden Service zur engen Zusammenarbeit mit unseren Kunden, um Lösungen zu finden, die eine optimale Kombination aus Material-, Prozess- und Systemkosten bieten.

Unsere Technischen Service- & Entwicklungszentren können neue Produkte und Lösungen schnell entwickeln, einen technischen Kundensupport vor Ort bieten und Ihre dringenden Anfragen umgehend beantworten. Wir sind weltweit mit Produktionsstandorten, Forschungs- und Entwicklungslabors, Lagerhäusern, Versandzentren und Verwaltungsbüros vertreten. Auf diese Weise können wir in allen wichtigen RegionenProbleme lösen, Leistungs- und Alterungstests durchführen und unsere Analysekapazitäten und Dienstleistungen bereitstellen.

Dow Automotive Systems bietet ein untereinander kompatibles Komplettsortiment an Gummi-Substrat-Haftmitteln für verschiedene Anwendungsbereiche in der Fahrzeug- und Fertigungsindustrie an, u.a. für Riemen, Schläuche, Lager, Buchsen und Dichtungen.

Haftmitteln auf Lösungsmittelbasis

Vulkanisation/ spezifische Eigenschaften

IM

TM

CM

Korrosionsbeständigkeit

Heißes Glykol

Bandbeschichtung

Standard

Höhere Hitze- und

Ölbeständigkeit

schwefelvernetzt

peroxidvernetzt

Primer

MEGUM™ 3276

MEGUM 3351

THIXON™ P-6-EF

THIXON P-11

THIXON P-11-F

THIXON P-21

THIXON P-22

MEGUM 3276

THIXON P-6-EF

THIXON P-7-6

MEGUM 3276

THIXON P-6-EF

THIXON P-11

THIXON P-21

THIXON P-22

THIXON P-11

THIXON P-21

MEGUM 3276

THIXON P-6-EF

MEGUM 3276

THIXON P-6-EF

MEGUM 3276

THIXON P-6-EF

THIXON P-11

THIXON P-21

MEGUM 3276

THIXON P-6-EF

THIXON P-11

THIXON P-21

Cover

MEGUM 122 J

MEGUM 128

MEGUM 538

MEGUM 5382

MEGUM 5386

THIXON 520-PEF

THIXON 526

MEGUM 538

MEGUM 5386

THIXON OSN-2-EF-V

THIXON 547-EF

MEGUM 122 J

MEGUM 128

MEGUM 538

MEGUM 5386

THIXON 520-PEF

THIXON 526

MEGUM 538

MEGUM 5386

THIXON 520-PEF

THIXON 526

MEGUM 538

THIXON 520-PEF

THIXON 526

MEGUM 538

MEGUM 5386

MEGUM 122-J

MEGUM 538

MEGUM 5382

MEGUM 5386

MEGUM 538

MEGUM 5382

MEGUM 5386

1-Schicht

MEGUM 508

MEGUM 5382

THIXON OSN-2-EF-V

THIXON OSN-2-EF-V

MEGUM 3276

MEGUM 10576

THIXON P-11

THIXON P-21

MEGUM 3340-1

MEGUM 15637

THIXON 715-EF/B

MEGUM 3340-1

MEGUM 15637

MEGUM 3340-1

THIXON 715-EF/B

Kautschuk

Naturkautschuk (NR)

Styrol-Butadien-Kautschuk

(SBR)

Polyisopren-Kautschuk (IR)

Polybutadien-Kautschuk (BR)

Polychloropren-Kautschuk

(CR)

Nitrilkautschuk (NBR)

Hydrierter Nitrilkautschuk

(HNBR)

Blend aus NBR und

Polyvinylchlorid (NBR/PVC)

Carboxylierter Nitrilkautschuk

(XNBR)

27

Kautschuk

Ethylenpropylen-

Kautschuk (Copolymere,

Terpolymere) (EPM/EPDM)

Butyl-Kautschuk (IIR)

Chlorsulfonierter

Kautschuk, (CSM)

Polyacrylat-Kautschuk

(ACM)

Vamac (AEM)

Fluor-Kautschuk (FKM)

Silikon-Kautschuk (VMQ)

Epichlorhydrin-Kautschuk

(ECO, CO)

Walzbare

Polyurethane (PU)

Gießfähige

Polyurethane (PU)


schwefelvernetzt

peroxidvernetzt

Amin, bisphenolvernetzt

peroxidvernetzt

Vernetzung bei Raumtemperatur

Vernetzung bei 100 °C

ohne Vortempern

Vortempern bei >100 °C

Primer

MEGUM™ 3276

THIXON™ P-6-EF

THIXON P-11

THIXON P-21

MEGUM 3276

THIXON P-6-EF

THIXON P-11

THIXON P-21

MEGUM 3276

THIXON P-6-EF

THIXON P-11

THIXON P-21

MEGUM 3290-1

THIXON P-6-EF

Cover

MEGUM 508

MEGUM 538

MEGUM 5382

MEGUM 5386

THIXON 560

MEGUM 508

MEGUM 538

MEGUM 5382

MEGUM 5386

THIXON 560

MEGUM 538

MEGUM 5382

MEGUM 5386

MEGUM 508

MEGUM 538

MEGUM 5382

MEGUM 5386

MEGUM 538

MEGUM 5382

MEGUM 5386

THIXON OSN-2-EF-V

Haftmittel auf Lösungsmittelbasis, Fortsetzung

1-Schicht

MEGUM 508

MEGUM 508

THIXON OSN-2-EF-V

MEGUM 3340-1

MEGUM 15637

THIXON 715-EF/B

MEGUM 15637

THIXON 715-EF/B

MEGUM 3340-1

MEGUM 10576

MEGUM 3290-1

THIXON 300 / 301

MEGUM 3299

THIXON 305

MEGUM 2488

MEGUM 3340-1

MEGUM 15637

THIXON 715-EF/B

THIXON OSN-2-EF-V

MEGUM 508

MEGUM 3276

MEGUM 15637

THIXON 715-EF/B

THIXON 422

THIXON 406

THIXON 422

THIXON 423

THIXON 406

THIXON 423

28

Kautschuk

Thermoplastische

Polyurethane (TPU)

Thermoplastische

Vulkanisate (TPV)

PVC


Primer Cover

Haftmittel auf Lösungsmittelbasis, Fortsetzung

1-Schicht

THIXON™ 422

THIXON 6110-F

THIXON 6106

1-Schicht

MEGUM W 9400

ROBOND™ TR-7021D

MEGUM W 9400

MEGUM W 2525

MEGUM W 3295

MEGUM W 3295

MEGUM W 2525

MEGUM W 9400

Kautschuk

Naturkautschuk (NR)

Styrol-Butadien-Kautschuk

(SBR)

Nitrilkautschuk (NBR)

Hydrierter Nitrilkautschuk

(HNBR)

Polyacrylat-Kautschuk (ACM)

Vamac (AEM)

Fluor-Kautschuk (FKM) -

Peroxidvernetzung

Fluor-Kautschuk (FKM) -

Bisphenolvernetzung

Silikon-Kautschuk (VMQ)

Ethylen-Copolymere (EPDM)

Primer

MEGUM™ W 9300

MEGUM W 9300

MEGUM W 9300

Cover

MEGUM W 9100

MEGUM W 9500

MEGUM W 9500

MEGUM W 9200

MEGUM W 9500

Haftmittel auf Wasserbasis

29

30

Viton™ Fluoroelastomers

Table 6. Viton™ Fluoroelastomer Product Listing

Viton™ Product Type

Polymer Properties Nominal Physical Properties*

Viton™ Fluoroelastomer

Product Description


Product Suggested Uses/Applications

Nominal Viscosity, ML1 + 10 at 121 °C (250 °F)

Specific Gravity

Polymer Fluorine Content,

%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of

Retraction (TR-10), °C

Volume Increase,

After 7 days/MeOH/23 °C

(73 °F)

A-Types: Curative-Containing Precompounds

A-201C 20 1.81 66.0 15 –17 +75 to 105%Fast cure rate, excellent injection molding rheology, mold release

Injection molding, O-rings, gaskets, extruded shapes

A-331C 30 1.81 66.0 20 –17 +75 to 105%Excellent mold flow, high elongation/tear resistance

Compression—injection molding of complex shapes, requiring maximum hot tear

A-361C 30 1.81 66.0 20 –17 +75 to 105%Excellent mold flow, tear resistance, bonding to metal inserts

Compression—injection molding of complex shapes, bonded metal inserts

A-401C 40 1.81 66.0 15 –17 +75 to 105%

Excellent rheology at high shear rates, excellent resistance to compression set

Compression, transfer, or injection molding of O-rings

A-601C 60 1.81 66.0 12 –17 +75 to 105%

High viscosity, high state of cure; optimum resistance to compression set

Compression molding of O-rings, simple shapes

A-Types: Gum Polymers

A-100 10 1.82 66.0 15 –17 +75 to 105%Ultra-low viscosity: excellent polymer rheology

Coatings, viscosity modifier for higher viscosity types

A-200 20 1.82 66.0 15 –17 +75 to 105% Low viscosity: excellent polymer rheology

Cured with VC-50: injection molding applications

A-500 50 1.82 66.0 15 –17 +75 to 105%Intermediate viscosity: excellent polymer rheology

Cured with VC-50: compression, transfer, injection molding

A-700 70 1.82 66.0 15 –17 +75 to 105% High viscosity: excellent physical properties


A-HV 160 1.82 66.0 15 –17 +75 to 105%Ultra-high viscosity: excellent physical properties

Cured with VC-50: compression molding, high strength vulcanizates

AL-300 30 1.77 66.0 25 –19 +75 to 105%Slightly improved low temperature flexibility. Low viscosity

Transfer, or injection molded goods, where A-types are marginal in low-temperature flexibility

AL-600 60 1.77 66.0 20 –19 +75 to 105%Slightly improved low temperature flexibility. Medium viscosity

General molded goods, where A-types are marginal in low-temperature flexibility

GAL-200S 25 1.79 66.0 30 –19 +75 to 105%Excellent resistance to automotive lubricating oils, aqueous fluids

FDA-compliant**: injection, transfer, or compression molded goods

continued






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)








A-401C 40 1.81 66.0 15 –17 +75 to 105%



A-601C 60 1.81 66.0 12 –17 +75 to 105%




















continued






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)








A-401C 40 1.81 66.0 15 –17 +75 to 105%



A-601C 60 1.81 66.0 12 –17 +75 to 105%




















continued

31






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)








A-401C 40 1.81 66.0 15 –17 +75 to 105%



A-601C 60 1.81 66.0 12 –17 +75 to 105%




















continued






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)








A-401C 40 1.81 66.0 15 –17 +75 to 105%



A-601C 60 1.81 66.0 12 –17 +75 to 105%




















continued






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)








A-401C 40 1.81 66.0 15 –17 +75 to 105%



A-601C 60 1.81 66.0 12 –17 +75 to 105%




















continued

32


Table 6. Viton™ Fluoroelastomer Product Listing (continued)




Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)

Low-Temperature Types of Viton™ Polymer

GLT Types

GLT-200S 25–30 1.78 64.0 30 –30 +75 to 105%20–30 Mooney GLT: best FKM low-temperature flexibility

Injection—transfer molded automotive fuel, chemical, petroleum industry seals

GLT-600S 65 1.78 64.0 35 –30 +75 to 105% Medium viscosity version of GLT

Transfer—compression molded automotive fuel, chemical, petroleum industry seals

GFLT Types

GFLT-200S 25–30 1.86 66.5 35 –24 +5 to 10%

30 ML GFLT: best combination of low-temperature flexibility/fluids resistance

FDA-compliant**: bonded fuel systems parts: resistance to oxygenates, low-temperature flexibility

GFLT-600S 65 1.86 66.5 40 –24 +5 to 10%



Viton™ Extreme™ Types

ETP-600S 60 1.82 67.0 40 –12 +10 to 15%

Outstanding resistance to fluids/chemicals, including low molecular weight acids, aldehydes, ketones

FDA-compliant**: transfer—compression molded seals, gaskets

*Nominal physical properties typical of those that can be expected of vulcanizates based on the specific type of Viton™ noted, in a 70A hardness, MT carbon black-filled formulation. These are not intended to serve as specifications.

**Various types of Viton™ curative-containing precompounds have been determined to be in compliance with FDA 21 CFR-177.2600—Rubber Articles for Repeated Food Contact.






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)

B-Types: Curative-Containing Precompounds

B-435C 40 1.85 68.5 25 –14 +35 to 45%Improved processing/mold release/bonding vs. B-641C, B-651C

Injection—compression molding of metal-bonded parts

B-601C 60 1.85 68.5 20 –14 +35 to 45%Excellent balance of resistance to compression set/fluids

Compression—injection molding of O-rings, simple shapes

B-651C 60 1.85 68.5 30 –14 +35 to 45%Excellent mold flow, very good tear resistance, bonding to metal inserts


B-Types: Gum Polymers

GBL-200S 20-30 1.85 67.0 30 –16 +40 to 50%Excellent resistance to automotive lubricating oils, aqueous fluids

FDA-compliant**: transfer—compression molding auto lubricating oil, coolant system seals

GBL-600S 65 1.85 67.0 30 –16 +40 to 50%Excellent resistance to automotive lubricating oils, aqueous fluids

FDA-compliant**: compression molding automotive lubricating oil, coolant system seals

B-202 20 1.86 68.5 25 –14 +35 to 45%Excellent extrudability; lower MeOH permeability than A-types

High shear extrusion applications—fuel hose veneer, coatings

B-600 60 1.86 68.5 20 –14 +35 to 45%

Intermediate viscosity, excellent polymer rheology, superior fluids resistance

Compression, transfer, and injection molding

F-Types: Curative-Containing Precompounds

F-605C 60 1.90 69.5 30 –8 +5 to 10%

Improved polymer base vs. F-601C—improved rheology, compression set

Compression molded goods requiring best fluids resistance

F-Types: Gum Polymers

GF-200S 25–30 1.91 70.0 35 –6 +3 to 5% Low viscosity version of GF-600S

FDA-compliant**: injection transfer, or compression molded goods requiring best fluids resistance

GF-600S 65 1.91 70.0 35 –6 +3 to 5%

Superior resistance to broad range of fluids and chemicals, including MeOH

FDA-compliant**: compression molded goods requiring best fluids resistance

continued

33






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)

Low-Temperature Types of Viton™ Polymer

GLT Types

GLT-200S 25–30 1.78 64.0 30 –30 +75 to 105%20–30 Mooney GLT: best FKM low-temperature flexibility

Injection—transfer molded automotive fuel, chemical, petroleum industry seals

GLT-600S 65 1.78 64.0 35 –30 +75 to 105% Medium viscosity version of GLT

Transfer—compression molded automotive fuel, chemical, petroleum industry seals

GFLT Types

GFLT-200S 25–30 1.86 66.5 35 –24 +5 to 10%



GFLT-600S 65 1.86 66.5 40 –24 +5 to 10%



Viton™ Extreme™ Types

ETP-600S 60 1.82 67.0 40 –12 +10 to 15%

Outstanding resistance to fluids/chemicals, including low molecular weight acids, aldehydes, ketones

FDA-compliant**: transfer—compression molded seals, gaskets

*Nominal physical properties typical of those that can be expected of vulcanizates based on the specific type of Viton™ noted, in a 70A hardness, MT carbon black-filled formulation. These are not intended to serve as specifications.

**Various types of Viton™ curative-containing precompounds have been determined to be in compliance with FDA 21 CFR-177.2600—Rubber Articles for Repeated Food Contact.






Product Description




Specific Gravity


%

Compression Set, %

70 hr/200 °C (392 °F)

Temperature of


Volume Increase,


(73 °F)

B-Types: Curative-Containing Precompounds

B-435C 40 1.85 68.5 25 –14 +35 to 45%Improved processing/mold release/bonding vs. B-641C, B-651C

Injection—compression molding of metal-bonded parts

B-601C 60 1.85 68.5 20 –14 +35 to 45%Excellent balance of resistance to compression set/fluids

Compression—injection molding of O-rings, simple shapes

B-651C 60 1.85 68.5 30 –14 +35 to 45%Excellent mold flow, very good tear resistance, bonding to metal inserts


B-Types: Gum Polymers

GBL-200S 20-30 1.85 67.0 30 –16 +40 to 50%Excellent resistance to automotive lubricating oils, aqueous fluids

FDA-compliant**: transfer—compression molding auto lubricating oil, coolant system seals

GBL-600S 65 1.85 67.0 30 –16 +40 to 50%Excellent resistance to automotive lubricating oils, aqueous fluids

FDA-compliant**: compression molding automotive lubricating oil, coolant system seals

B-202 20 1.86 68.5 25 –14 +35 to 45%Excellent extrudability; lower MeOH permeability than A-types

High shear extrusion applications—fuel hose veneer, coatings

B-600 60 1.86 68.5 20 –14 +35 to 45%

Intermediate viscosity, excellent polymer rheology, superior fluids resistance

Compression, transfer, and injection molding

F-Types: Curative-Containing Precompounds

F-605C 60 1.90 69.5 30 –8 +5 to 10%

Improved polymer base vs. F-601C—improved rheology, compression set

Compression molded goods requiring best fluids resistance

F-Types: Gum Polymers

GF-200S 25–30 1.91 70.0 35 –6 +3 to 5% Low viscosity version of GF-600S

FDA-compliant**: injection transfer, or compression molded goods requiring best fluids resistance

GF-600S 65 1.91 70.0 35 –6 +3 to 5%

Superior resistance to broad range of fluids and chemicals, including MeOH

FDA-compliant**: compression molded goods requiring best fluids resistance

continued

Plastics SolutionsOur products – your success.

Additives for Rubber processing

High Temperature Plasticizers

Physical Properties

Emery Oleochemicals, ein 50:50 Joint Venture aus Sime Darby Plantation und PTT Chemical International Pte Ltd, ist einer der weltweit größten Produzenten von Oleochemikalien, welche aus nachwachsenden Rohstoffen generiert werden und somit eng mit dem Begriff der Nachhaltigkeit verknüpft sind.

Am deutschen Standort in Loxstedt werden u.a. Weichmacher und Verabeitungshilfen für die Kunststoffindustrie hergestellt. EDENOL© Produkte sind heute in vielen Rezepturen polarer Kautschuke zur Verbesserung der Verarbeitungs- , sowie der Vulkanisateigenschaften über ein breites Temperaturspektrum im Einsatz.

34

Plastics Solutions Our products – your success.


Function Product Polymer Description Delivery Form

MeltingRange (°C)

Dosage(phr)

Plasticizer EDENOL® 102 Synthetic Rubbers Fatty acid polyglycol ester liquid – 5 - 40

Plasticizer EDENOL® 111 Synthetic Rubbers Adipate ester liquid – 5 - 40

Plasticizer EDENOL® 123 Synthetic Rubbers Butyl carbitol formal liquid – 5 - 40

Plasticizer EDENOL® 181 Synthetic Rubbers High molecular weight adipate ester

liquid – 5 - 40

Plasticizer EDENOL® 202 Synthetic Rubbers Polymeric plasticizer liquid – 5 - 40


Plasticizer EDENOL® 210 Synthetic Rubbers Polymeric plasticizer based on adipic acid

liquid – 5 - 40

Plasticizer EDENOL® 240 Synthetic Rubbers Polymeric plasticizer based on adipic acid

liquid – 5 - 40


Plasticizer EDENOL® 888 Synthetic Rubbers Sebacate ester liquid – 5 - 40

Plasticizer EDENOL® DBS Synthetic Rubbers Sebacate ester liquid – 5 - 40

Plasticizer EDENOL® DOZ Synthetic Rubbers Azelaic ester liquid – 5 - 40

Plasticizer EDENOL® T810T STAB Synthetic Rubbers Trimellitate ester liquid – 5 - 40

Plasticizer EDENOL® TOT Stab Synthetic Rubbers Trimellitate ester liquid – 5 - 40

Plastics SolutionsOur products – your success.


High Temperature Plasticizers

Physical Properties

Emery Oleochemicals, ein 50:50 Joint Venture aus Sime Darby Plantation und PTT Chemical International Pte Ltd, ist einer der weltweit größten Produzenten von Oleochemikalien, welche aus nachwachsenden Rohstoffen generiert werden und somit eng mit dem Begriff der Nachhaltigkeit verknüpft sind.

Am deutschen Standort in Loxstedt werden u.a. Weichmacher und Verabeitungshilfen für die Kunststoffindustrie hergestellt. EDENOL© Produkte sind heute in vielen Rezepturen polarer Kautschuke zur Verbesserung der Verarbeitungs- , sowie der Vulkanisateigenschaften über ein breites Temperaturspektrum im Einsatz.

35

Plastics Solutions Our products – your success.


Function Product Polymer Description Delivery Form

MeltingRange (°C)

Dosage(phr)

Antistatic Agent LOXIOL® 3366 Synthetic Rubbers Polyol partial ester liquid – 0.5–10.0

Antistatic Agent LOXIOL® 3380 Synthetic Rubbers Mixture based on polyglycol ester liquid – 0.2–5.0

Release Agent LOXIOL® 3820 Synthetic Rubbers Wax ester liquid – 0.2–0.5

Release Agent LOXIOL® E SPEZIAL Synthetic Rubbers Erucic acid amide solid 80 - 86 0.1 - 0.5

Antiblocking-/ Slip Agent

LOXIOL® EBS SPEZIAL Synthetic Rubbers Ethylene-bis-stearamide solid 141 - 147 0.5 - 1.0

Lubricant LOXIOL® EBS SPEZIAL Synthetic Rubbers Ethylene-bis-stearamide solid 141 - 147 0.05 - 1.0

Lubricant LOXIOL® EP 3500 Synthetic Rubbers Ca-stearate solid 150–170 0.2–1.0

Release Agent LOXIOL® EP 3500 Synthetic Rubbers Ca-stearate solid 150–170 0.2–1.0

Release Agent LOXIOL® G 20 Synthetic Rubbers Fatty acid solid 54–56 1.0–2.0

Antiblocking-/ Slip Agent

LOXIOL® OA SPEZIAL Synthetic Rubbers Oleic acid amide solid 68 - 78 0.05 . 0.2

Release Agent LOXIOL® OA SPEZIAL Synthetic Rubbers Oleic acid amide solid 68 - 78 0.05 . 0.2

Lubricant LOXIOL® P 1732 Synthetic Rubbers Combination lubricant solid 100–115 0.3–1.2

Release Agent LOXIOL® P 1732 Synthetic Rubbers Combination lubricant solid 100–115 0.3–1.2

Lubricant LOXIOL® P 728 Synthetic Rubbers Polyol partial ester solid 49–52 0.2–0.5

Release Agent LOXIOL® P 728 Synthetic Rubbers Polyol partial ester solid 49–52 0.2–0.5

Lubricant LOXIOL® P 861 / 3.5 Synthetic Rubbers Polyol ester solid 60–63 0.2–0.5

Release Agent LOXIOL® S SPEZIAL Synthetic Rubbers Stearic acid amide solid 95 - 105 0.1 - 0.8

Rubber ResinsPRODUCT SELECTOR GUIDE

RUBBER RESINS PRODUCT SELECTOR GUIDE www.siigroup.com

Unique Solutions for Rubber ResinsAt SI Group, our unparalleled experience is what sets us apart. Our broad portfolio of tackifier, bonding, curing and reinforcing resins is used in rubber compounding to improve performance of rubber products like tires, technical rubber goods and vehicle parts. SI Group’s rubber selector guide has been designed to make your product selection decisions faster and easier. Additionally, our teams of technical experts are available to provide guidance and expertise along the way.

Tackifier Resins

The high performance and consistent quality of our standard and super tackifier resins differentiate us. As a global leader in alkylphenolic resins, our offerings provide optimal tack for various time and environmental requirements. SI Group tackifier resins are added to rubber compounds to promote the bonding of different parts (plies) that make up a rubber product until they are cured or vulcanized.

Curing Resins

Our unique range of phenolic curing resins and our deep experience enable compounders to achieve outstanding heat and aging resistance in low unsaturation diene rubbers. Compared to sulfur curing systems, SI Group resins provide better heat and moisture resistance, ideal for repeated heat cycles such as butyl curing bladders. They are the go-to technology for the production of TPV. They can match peroxide cured systems in properties, and with advanced activation systems including our brominated resin can also provide fast cure.

Bonding Resins

Our adhesion promoting offerings improve the overall bonding to mechanical reinforcements. Our ELAZTOBOND®A250LP bonding resins contain zero free resorcinol while providing excellent rubber-to-rubber knit strength. SI Group bonding resins produce crosslinked secondary networks, high modulus, good adhesion and high reactivity.

Reinforcing Resins

Our reinforcing resin portfolio provides increased hardness, toughness, stiffness and abrasion, and tear resistance to the rubber compound. Because of their low viscosity in the mixer, they come into their own in high hardness applications where fillers are difficult to incorporate. We provide several reinforcing resin options including straight phenol-formaldehyde, distilled tall oil modified, and cashew nutshell liquid modified, all with low residual monomer grades, enabling compatibility with many types of rubber.

SI Group’s rubber resins improve the safety and durability of modern tires.

RUBBER TYPES MENTIONED IN THE TABLES

NR Natural Rubber

SBR Styrene Butadiene Rubber

BR Butadiene Rubber

IIR Isobutylene Isoprene Rubber (Butyl)

CIIR/BIIR Chloro or Bromobutyl Rubber

NBR Acrylonitrile Butadiene Rubber (Nitrile)

HNBR Hydrogenated NBR

EPDM Ethylene Propylene Diene Monomer

36

Rubber ResinsPRODUCT SELECTOR GUIDE


Unique Solutions for Rubber ResinsAt SI Group, our unparalleled experience is what sets us apart. Our broad portfolio of tackifier, bonding, curing and reinforcing resins is used in rubber compounding to improve performance of rubber products like tires, technical rubber goods and vehicle parts. SI Group’s rubber selector guide has been designed to make your product selection decisions faster and easier. Additionally, our teams of technical experts are available to provide guidance and expertise along the way.

Tackifier Resins

The high performance and consistent quality of our standard and super tackifier resins differentiate us. As a global leader in alkylphenolic resins, our offerings provide optimal tack for various time and environmental requirements. SI Group tackifier resins are added to rubber compounds to promote the bonding of different parts (plies) that make up a rubber product until they are cured or vulcanized.

Curing Resins

Our unique range of phenolic curing resins and our deep experience enable compounders to achieve outstanding heat and aging resistance in low unsaturation diene rubbers. Compared to sulfur curing systems, SI Group resins provide better heat and moisture resistance, ideal for repeated heat cycles such as butyl curing bladders. They are the go-to technology for the production of TPV. They can match peroxide cured systems in properties, and with advanced activation systems including our brominated resin can also provide fast cure.

Bonding Resins

Our adhesion promoting offerings improve the overall bonding to mechanical reinforcements. Our ELAZTOBOND®A250LP bonding resins contain zero free resorcinol while providing excellent rubber-to-rubber knit strength. SI Group bonding resins produce crosslinked secondary networks, high modulus, good adhesion and high reactivity.

Reinforcing Resins

Our reinforcing resin portfolio provides increased hardness, toughness, stiffness and abrasion, and tear resistance to the rubber compound. Because of their low viscosity in the mixer, they come into their own in high hardness applications where fillers are difficult to incorporate. We provide several reinforcing resin options including straight phenol-formaldehyde, distilled tall oil modified, and cashew nutshell liquid modified, all with low residual monomer grades, enabling compatibility with many types of rubber.

SI Group’s rubber resins improve the safety and durability of modern tires.

RUBBER TYPES MENTIONED IN THE TABLES

NR Natural Rubber

SBR Styrene Butadiene Rubber

BR Butadiene Rubber

IIR Isobutylene Isoprene Rubber (Butyl)

CIIR/BIIR Chloro or Bromobutyl Rubber

NBR Acrylonitrile Butadiene Rubber (Nitrile)

HNBR Hydrogenated NBR

EPDM Ethylene Propylene Diene Monomer

37


TackifiersSI Group’s wide selection of tackifier resins are well known as an essential component in tire production, where they help prevent expensive delamination in green tires. The products have been developed to meet the broad variety of tack needs in many kinds of rubber and different applications. Additionally, several grades are used in other situations including for low-polarity rubbers such as EPDM, for retreading, or for specific technical rubber applications.

SI Group offers a wide range of tackifier resins that provide the optimal tack for specific compounds, time and condition requirements, while also ensuring high quality and consistent performance.

Product NameTack Retention

Tack LevelMelting Point (ºC),

Ring and Ball

BenefitsNR SBR BR IIR NBR EPDM 50 100 150

Standard PTOP Tackifier

SP-1068 standardThe industry standard phenolic tackifier. Wide use in tire and technical rubber goods (TRG).

Modified PTOP Tackifier

ELAZTOBOND® T6000 excellent

Supertackifier for highly filled compounds and low tack polymers. Excellent tack retention.

SP-1077 standardCreates high tack in EPDM and other low polarity rubbers.

PTBP Tackifier

SMD-31144 improvedGood tack retention, recommended for retreading stocks.

High Effectiveness Low

38


TackifiersSI Group’s wide selection of tackifier resins are well known as an essential component in tire production, where they help prevent expensive delamination in green tires. The products have been developed to meet the broad variety of tack needs in many kinds of rubber and different applications. Additionally, several grades are used in other situations including for low-polarity rubbers such as EPDM, for retreading, or for specific technical rubber applications.

SI Group offers a wide range of tackifier resins that provide the optimal tack for specific compounds, time and condition requirements, while also ensuring high quality and consistent performance.

Product NameTack Retention

Tack LevelMelting Point (ºC),

Ring and Ball

BenefitsNR SBR BR IIR NBR EPDM 50 100 150

Standard PTOP Tackifier

SP-1068 standardThe industry standard phenolic tackifier. Wide use in tire and technical rubber goods (TRG).

Modified PTOP Tackifier

ELAZTOBOND® T6000 excellent

Supertackifier for highly filled compounds and low tack polymers. Excellent tack retention.

SP-1077 standardCreates high tack in EPDM and other low polarity rubbers.

PTBP Tackifier

SMD-31144 improvedGood tack retention, recommended for retreading stocks.


Product NameCure Speed† Form

Methylol Content (%) Melting Point (ºC)

Benefits6 8 10 12 14 80 90 100 110

Octyphenol Resol

SP-1045 3 FlakesAn octylphenol resol based curing resin that offers moderate cure speed. Ideal for use in tire bladder manufacture to cure IIR.

HRJ-10518 4 FlakesAn octylphenol resol curing resin that offers faster cure speed than other non-brominated alternatives.

Octyphenol Resol, Brominated

SP-1055 7 Flakes

A brominated octylphenol based curing resin that offers very fast cure. With this product there is no need for added halogen donor. Ideal for small cross cross-section parts with short cure cycles.

Butylphenol Resol

ELAZTOBOND® C650 3 Flakes

A PTOP free curing resin with moderate cure speed

ELAZTOBOND® C730 3 Flakes

A PTOP free curing resin with faster cure speed.

Special Alylphenol Resol in Oil

SMD-31214A 4

Liquid (30% solids content)

N/A

Developed to cure EPDM for continuous production of TPV, this specialised resin is supplied in a compatible oil, ideal for use in liquid feed systems therefore easy to disperse.


*of the solid resin, 3.4% if oil included

*

Rubber Type* Resin Cure Suitability

NR, SBR, BR Will crosslink but generally not used due to high unsaturation; used for NR based adhesives

IIR, CIIR, BIIR Gives exceptional heat aging performance; widely used for tire bladder production

NBR, HNBR Gives exceptional aging properties

EPDM Gives exceptional aging properties; especially suitable for thermoplastic vulcanisate (TPV) production

*See definitions on Page 1 of the Rubber Resins Product Selector Guide

Curing ResinsPioneers in the field, SI Group’s innovative rubber curing solutions have been developed through years of product and application testing with our customers. Phenolic curing resins work in rubbers that have activated C=C bonds and are particularly useful in low unsaturation polymers because the combination provides exceptional heat and aging resistance.

The formulation needs other ingredients to activate cure and regulate speed. Alternatives include:

• Halogen donor (e.g., polychloroprene) + zinc oxide• Metal halide (e.g., stannous chloride) + zinc oxide• Brominated resin SP-1055 + zinc oxide

Other ingredients can have a retarding or accelerating effect on cure. We can advise on starter formulations.

† Indicative values from 1 (very slow) to 10 (extremely fast) in IIR

39


Bonding ResinsSI Group’s bonding resin offerings are used to meet the optimal performance required by our customers in rubber compounds, either as solid resins or in a water-based dipping system as liquid resins. Bonding resin selection needs to take into account the rubber, the mechanical reinforcement (wire or textile), the surface treatment of the reinforcement, the process conditions and the service conditions of the final product. All solid bonding resins require a curative such as HMMM or HMT.

Compatibility Melting Point (ºC)

BenefitsProduct Name Type Form NR SBR BR IIR NBR EPDM 100 120 140

Solid Phenolic Resin

ELAZTOBOND® A250LP

Zero free resorcinol, modified phenolic resin

Flakes

A modified phenolic resin designed to give long-term bonding with exceptional flex resistance and aging properties. Provides a very low fume level and zero free resorcinol.

R7576HRModified phenolic resin

Pastilles

A modified phenolic resin that offers a very low fume level while maintaining good aging properties.


Water-Based Resin

Product Name Type Form Viscosity (mPas) Solids Content % pH Benefits

SRF-1524Resorcinol / formaldehyde resin in water

Liquid 3000–5000 73–77 1.2–2.5Used as a component of latex dip systems for tire cord or belt and hose fabric.

Our bonding resins help to provide permanent bonds between rubber and mechanical reinforcements such as wire and textiles.

40


Bonding ResinsSI Group’s bonding resin offerings are used to meet the optimal performance required by our customers in rubber compounds, either as solid resins or in a water-based dipping system as liquid resins. Bonding resin selection needs to take into account the rubber, the mechanical reinforcement (wire or textile), the surface treatment of the reinforcement, the process conditions and the service conditions of the final product. All solid bonding resins require a curative such as HMMM or HMT.

Compatibility Melting Point (ºC)

BenefitsProduct Name Type Form NR SBR BR IIR NBR EPDM 100 120 140

Solid Phenolic Resin

ELAZTOBOND® A250LP

Zero free resorcinol, modified phenolic resin

Flakes

A modified phenolic resin designed to give long-term bonding with exceptional flex resistance and aging properties. Provides a very low fume level and zero free resorcinol.

R7576HRModified phenolic resin

Pastilles

A modified phenolic resin that offers a very low fume level while maintaining good aging properties.


Water-Based Resin

Product Name Type Form Viscosity (mPas) Solids Content % pH Benefits

SRF-1524Resorcinol / formaldehyde resin in water

Liquid 3000–5000 73–77 1.2–2.5Used as a component of latex dip systems for tire cord or belt and hose fabric.

Our bonding resins help to provide permanent bonds between rubber and mechanical reinforcements such as wire and textiles.


Reinforcing ResinsSI Group offers a range of resins to meet the reinforcing requirements for many types of rubber and to provide low residual monomer solutions. The resins work by reacting with a crosslinker (HMMM or HMT) to form a strong three-dimensional network inside the rubber. SI Group’s reinforcing resin solutions provide increased hardness, toughness, stiffness, abrasion and tear resistance to the rubber compound, especially at low strains. The selection of a reinforcing resin system should consider the required static and dynamic physical properties, processing and curing.

Reinforcing Resins

Product Name

Scorch Safety In* Effectiveness at 10 phr in Melting Point (ºC)

BenefitsForm NR SBR/BR NR SBR BR IIR NBR EPDM 80 100 120

Phenol-Formaldehyde (PF) Resin

SFP-169 Pastilles 3 3General purpose, low residual phenol reinforcing resin. Good compromise between scorch safety and final hardness.

Cashew Nutshell Liquid (CNSL) Modified Resin

SP-6700 Pastilles 3 5Gives higher hardness than P/F or DTO in some rubbers, can be scorch sensitive.

SP-6600 Powder 3 5Powder form helps incorporation in final mixing stage; contains HMT crosslinker.

Distilled Tall Oil (DTO) Modified Resin

SP-6701 / SMD 3644 Flakes 9 9

Low viscosity helps filler incorporation, good scorch safety.

SP-6601 Powder 9 9Powder form helps incorporation in final mixing stage; contains HMT crosslinker.


* Scorch safety - Higher number indicates small reduction in scorch time, lower number indicates bigger reduction in scorch time.

41

www.siigroup.comRUBBER RESINS PRODUCT SELECTOR GUIDE

North AmericaUnited States

South AmericaBrazil

EuropeUnited KingdomFranceSwitzerland

AfricaSouth Africa

AsiaChinaKoreaIndiaSingapore

Rubber Center of Competence

Manufacturing centers—Resin ( EMEA)

Manufacturing centers—Chemical

Global R&D Centers

Corporate HeadquartersNiskayuna, NY

SI Group Rubber ResinsEurope, Middle East and Africa

Key Facts

• 20+ global manufacturing facilities in the US, Brazil, China, United Kingdom, France, India, Korea, Singapore, South Africa and Switzerland

• More than 2,700 employees• Customers in more than 90 countries• World headquarters in Niskayuna, NY, USA

SI Group has been producing rubber resins in the Europe, Middle East and Africa region since the 1960s. Our resin plants in the region are located in Bethune, France; and Durban and Johannesburg, South Africa.

Our global rubber resin offerings are backed by world-class manufacturing and R&D. Additionally, our sales and technical experts are available to assist customers in the selection and use of our products.

Bethune, France Durban, South Africa Johannesburg, South Africa

42

www.siigroup.comRUBBER RESINS PRODUCT SELECTOR GUIDE

North AmericaUnited States

South AmericaBrazil

EuropeUnited KingdomFranceSwitzerland

AfricaSouth Africa

AsiaChinaKoreaIndiaSingapore

Rubber Center of Competence

Manufacturing centers—Resin ( EMEA)

Manufacturing centers—Chemical

Global R&D Centers

Corporate HeadquartersNiskayuna, NY

SI Group Rubber ResinsEurope, Middle East and Africa

Key Facts

• 20+ global manufacturing facilities in the US, Brazil, China, United Kingdom, France, India, Korea, Singapore, South Africa and Switzerland

• More than 2,700 employees• Customers in more than 90 countries• World headquarters in Niskayuna, NY, USA

SI Group has been producing rubber resins in the Europe, Middle East and Africa region since the 1960s. Our resin plants in the region are located in Bethune, France; and Durban and Johannesburg, South Africa.

Our global rubber resin offerings are backed by world-class manufacturing and R&D. Additionally, our sales and technical experts are available to assist customers in the selection and use of our products.

Bethune, France Durban, South Africa Johannesburg, South Africa

43

446 7

Carbon Blacks

Property*UnitTest Method

Iodinemg / gASTM D 1510

STSAm²/gASTM D 6556

OANml / 100 gASTM D 2414

COANml / 100 gASTM D 3493

Tint–ASTM D 3265

Sieve ResidueppmASTM D 1514

IPH avg.gASTM D 5230

Heating Loss%ASTM D 1509

Fines %ASTM D 1508

Pour Densityg / dm³ASTM D 1513

NDMppmASTM D 7724


ASTM Carbon Blacks CORAX® N115 160 124 113 97 123 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 345 – CORAX® N115

CORAX® N121 121 114 132 111 119 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 320 – CORAX® N121

CORAX® N134 142 131 127 102 131 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 320 – CORAX® N134

CORAX® N220 121 106 114 98 116 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 350 – CORAX® N220

CORAX® N234 120 113 125 100 124 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 325 – CORAX® N234

CORAX® N326 82 77 72 69 111 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 455 – CORAX® N326

CORAX® N330 82 76 102 88 103 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 370 – CORAX® N330

CORAX® N339 90 88 120 99 110 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 340 – CORAX® N339

CORAX® N347 90 83 124 99 105 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 330 – CORAX® N347

CORAX® N375 90 90 114 96 114 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 345 – CORAX® N375

CORAX® N550 43 39 121 85 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 365 – CORAX® N550

CORAX® N660 36 34 90 74 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 440 – CORAX® N660

CORAX® N683 35 34 133 87 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 350 – CORAX® N683

CORAX® N772 30 30 65 59 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 530 – CORAX® N772

CORAX® N774 29 29 72 63 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 495 – CORAX® N774

HP Blacks CORAX® HP 130 115 122 135 - - ≤ 500 ≤ 40 ≤ 1.2 ≤ 10.0 300 – CORAX® HP 130

CORAX® HP 180 205 175 130 103 – ≤ 500 ≤ 45 ≤ 2.5 ≤ 7.0 300 – CORAX® HP 180

ECORAX® ECORAX® 1670 100 92 140 107 104 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 310 – ECORAX® 1670

ECORAX® 1720 127 115 135 110 112 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 320 – ECORAX® 1720

ECORAX® S 470 54 47 133 – – ≤ 300 ≤ 30 ≤ 1.0 ≤ 10.0 335 ECORAX® S 470

ECORAX® S 204 19 19 138 76 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 345 – ECORAX® S 204

ECORAX® S 206 19 19 75 60 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 520 – ECORAX® S 206

PUREX® PUREX® LS 18 19 19 75 60 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 520 ≤ 80 PUREX® LS 18

PUREX® HS 20 19 19 138 76 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 345 ≤ 80 PUREX® HS 20

PUREX® HS 22 21 20 102 75 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 430 ≤ 80 PUREX® HS 22

PUREX® HS 25 28 28 123 83 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 375 ≤ 80 PUREX® HS 25

PUREX® LS 30 RP** 30 30 65 – – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 530 ≤ 80 PUREX® LS 30 RP**

PUREX® HS 40 43 38 111 82 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 385 ≤ 80 PUREX® HS 40

PUREX® HS 45 43 39 121 85 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 365 ≤ 80 PUREX® HS 45

PUREX® HS 45 RP** 43 39 121 85 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 365 ≤ 80 PUREX® HS 45 RP**

PUREX® HS 55 54 47 133 – – ≤ 50 ≤ 40 ≤ 0.50 ≤ 10.0 335 ≤ 80 PUREX® HS 55

Lamp Blacks DUREX® 0 BEADS 30 17 – – – ≤ 50 ≤ 40 ≤ 0.75 ≤ 7.0 375 ≤ 80 DUREX® 0 BEADS

DUREX® 0 POWDER 35 18 – – – ≤ 50 – ≤ 0.75 – 150 ≤ 80 DUREX® 0 POWDER

Gas Black CK 3 – 80 104 – – ≤ 100 ≤ 40 ≤ 4.0 ≤ 7.0 380 – CK 3

Thermal Black CORAX® N990 10 – 38 – – ≤ 30 – ≤ 0.20 ≤ 8.0 640 – CORAX® N990

Conductive Blacks PRINTEX® L6 BEADS 300 125 124 – – ≤ 50 ≤ 20 ≤ 2.0 ≤ 12.0 – – PRINTEX® L6 BEADS

PRINTEX® XE2 B 1125 1000 420 – – ≤ 500 ≤ 20 ≤ 2.0 ≤ 12.0 – – PRINTEX® XE2 B

* detailed designations: Iodine: Iodine adsorption numberSTSA: Statistical thickness surface area

OAN: Oil absorption numberCOAN: Oil absorption number of compressed sampleIPH avg.: Individual pellet hardness, average 1.4 – 1.7 mm

** Carbon Black with low content of polycyclic aromatic hydrocarbons (PAH)

456 7

Carbon Blacks


Iodinemg / gASTM D 1510

STSAm²/gASTM D 6556

OANml / 100 gASTM D 2414

COANml / 100 gASTM D 3493

Tint–ASTM D 3265

Sieve ResidueppmASTM D 1514

IPH avg.gASTM D 5230

Heating Loss%ASTM D 1509

Fines %ASTM D 1508

Pour Densityg / dm³ASTM D 1513

NDMppmASTM D 7724


ASTM Carbon Blacks CORAX® N115 160 124 113 97 123 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 345 – CORAX® N115

CORAX® N121 121 114 132 111 119 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 320 – CORAX® N121

CORAX® N134 142 131 127 102 131 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 320 – CORAX® N134

CORAX® N220 121 106 114 98 116 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 350 – CORAX® N220

CORAX® N234 120 113 125 100 124 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 325 – CORAX® N234

CORAX® N326 82 77 72 69 111 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 455 – CORAX® N326

CORAX® N330 82 76 102 88 103 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 370 – CORAX® N330

CORAX® N339 90 88 120 99 110 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 340 – CORAX® N339

CORAX® N347 90 83 124 99 105 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 330 – CORAX® N347

CORAX® N375 90 90 114 96 114 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 345 – CORAX® N375

CORAX® N550 43 39 121 85 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 365 – CORAX® N550

CORAX® N660 36 34 90 74 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 440 – CORAX® N660

CORAX® N683 35 34 133 87 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 350 – CORAX® N683

CORAX® N772 30 30 65 59 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 530 – CORAX® N772

CORAX® N774 29 29 72 63 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 495 – CORAX® N774

HP Blacks CORAX® HP 130 115 122 135 - - ≤ 500 ≤ 40 ≤ 1.2 ≤ 10.0 300 – CORAX® HP 130

CORAX® HP 180 205 175 130 103 – ≤ 500 ≤ 45 ≤ 2.5 ≤ 7.0 300 – CORAX® HP 180

ECORAX® ECORAX® 1670 100 92 140 107 104 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 310 – ECORAX® 1670

ECORAX® 1720 127 115 135 110 112 ≤ 500 ≤ 45 ≤ 1.0 ≤ 7.0 320 – ECORAX® 1720

ECORAX® S 470 54 47 133 – – ≤ 300 ≤ 30 ≤ 1.0 ≤ 10.0 335 ECORAX® S 470

ECORAX® S 204 19 19 138 76 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 345 – ECORAX® S 204

ECORAX® S 206 19 19 75 60 – ≤ 300 ≤ 45 ≤ 1.0 ≤ 7.0 520 – ECORAX® S 206

PUREX® PUREX® LS 18 19 19 75 60 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 520 ≤ 80 PUREX® LS 18

PUREX® HS 20 19 19 138 76 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 345 ≤ 80 PUREX® HS 20

PUREX® HS 22 21 20 102 75 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 430 ≤ 80 PUREX® HS 22

PUREX® HS 25 28 28 123 83 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 375 ≤ 80 PUREX® HS 25

PUREX® LS 30 RP** 30 30 65 – – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 530 ≤ 80 PUREX® LS 30 RP**

PUREX® HS 40 43 38 111 82 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 385 ≤ 80 PUREX® HS 40

PUREX® HS 45 43 39 121 85 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 365 ≤ 80 PUREX® HS 45

PUREX® HS 45 RP** 43 39 121 85 – ≤ 50 ≤ 40 ≤ 0.50 ≤ 7.0 365 ≤ 80 PUREX® HS 45 RP**

PUREX® HS 55 54 47 133 – – ≤ 50 ≤ 40 ≤ 0.50 ≤ 10.0 335 ≤ 80 PUREX® HS 55

Lamp Blacks DUREX® 0 BEADS 30 17 – – – ≤ 50 ≤ 40 ≤ 0.75 ≤ 7.0 375 ≤ 80 DUREX® 0 BEADS

DUREX® 0 POWDER 35 18 – – – ≤ 50 – ≤ 0.75 – 150 ≤ 80 DUREX® 0 POWDER

Gas Black CK 3 – 80 104 – – ≤ 100 ≤ 40 ≤ 4.0 ≤ 7.0 380 – CK 3

Thermal Black CORAX® N990 10 – 38 – – ≤ 30 – ≤ 0.20 ≤ 8.0 640 – CORAX® N990

Conductive Blacks PRINTEX® L6 BEADS 300 125 124 – – ≤ 50 ≤ 20 ≤ 2.0 ≤ 12.0 – – PRINTEX® L6 BEADS

PRINTEX® XE2 B 1125 1000 420 – – ≤ 500 ≤ 20 ≤ 2.0 ≤ 12.0 – – PRINTEX® XE2 B

* detailed designations: Iodine: Iodine adsorption numberSTSA: Statistical thickness surface area

OAN: Oil absorption numberCOAN: Oil absorption number of compressed sampleIPH avg.: Individual pellet hardness, average 1.4 – 1.7 mm

** Carbon Black with low content of polycyclic aromatic hydrocarbons (PAH)

08 | Smarter Stabilization Solutions for Elastomers

Aminic Antioxidants(Staining and Discoloring)

Aminox®

BLE®25

Naugard® 445

Naugard® PS30

Octamine®

Naugard® Q

Phenolic Antioxidants(Non Staining Non Discoloring)

Lowinox® 22M46

Lowinox® 22M46-45D

Lowinox® CPL

Lowinox® CPL-50D

Naugard® PS48

Naugawhite®

AntiozonantsDurazone® 37

Flexzone® 4L

Novazone® AS

Sunproof® Extra

Sunproof® Improved

Sunproof® Junior FT

Sunproof® Super

Curing AgentsHepteen® Base

Trimene Base®

Royalac® 150 liquid

Retarder ESEN

Bonding Agent P-1

Mol

ded

&

Mec

hani

cal G

oods

Tire

s

Floo

r Cov

erin

gs&

Mat

s

Elec

tric

Cab

les

Conv

eyor

Bel

ts

Was

hing

Mac

hine

Seal

s

Roof

Cov

erin

gs

Elec

tric

Cab

les

Car W

indo

w&

Doo

r Sea

ls

Tire

s

Brid

ge B

eari

ngs

Engi

ne M

ount

ings

Hos

e

Shoe

Sol

es

Toys

& A

rtic

les

for

Child

ren

ELASTOMER COMPOUNDINGSELECTOR GUIDE

SBR | EPDM | Natural Rubber |

• ••

• • • • • • • • • • • •

• • • • •

• • • • • • •

• • • • • •

• •

• • • ° ° ° ° • • • • • •• • • • • • •

•• • • • •• • • • •• • • • •• • • • •

• • • •° ° ° ° ° °

• •

• • • • • • •

Alterungsschutzmittel der ADDIVANT verlängern u.a. die Lebensdauer von Kautschukvulkanisaten. Je nach Produkt schützen sie das fertige Bauteil temporär vor Ermüdungserscheinungen, die beispielsweise durch Hitze- und Ozoneinwirkung hervorgerufen werden können.

ELASTOMER COMPOUNDING SELECTOR GUIDE

46

08 | Smarter Stabilization Solutions for Elastomers

Aminic Antioxidants(Staining and Discoloring)

Aminox®

BLE®25

Naugard® 445

Naugard® PS30

Octamine®

Naugard® Q

Phenolic Antioxidants(Non Staining Non Discoloring)

Lowinox® 22M46

Lowinox® 22M46-45D

Lowinox® CPL

Lowinox® CPL-50D

Naugard® PS48

Naugawhite®

AntiozonantsDurazone® 37

Flexzone® 4L

Novazone® AS

Sunproof® Extra

Sunproof® Improved

Sunproof® Junior FT

Sunproof® Super

Curing AgentsHepteen® Base

Trimene Base®

Royalac® 150 liquid

Retarder ESEN

Bonding Agent P-1

Mol

ded

&

Mec

hani

cal G

oods

Tire

s

Floo

r Cov

erin

gs&

Mat

s

Elec

tric

Cab

les

Conv

eyor

Bel

ts

Was

hing

Mac

hine

Seal

s

Roof

Cov

erin

gs

Elec

tric

Cab

les

Car W

indo

w&

Doo

r Sea

ls

Tire

s

Brid

ge B

eari

ngs

Engi

ne M

ount

ings

Hos

e

Shoe

Sol

es

Toys

& A

rtic

les

for

Child

ren

ELASTOMER COMPOUNDINGSELECTOR GUIDE

SBR | EPDM | Natural Rubber |

• ••

• • • • • • • • • • • •

• • • • •

• • • • • • •

• • • • • •

• •

• • • ° ° ° ° • • • • • •• • • • • • •

•• • • • •• • • • •• • • • •• • • • •

• • • •° ° ° ° ° °

• •

• • • • • • •

Alterungsschutzmittel der ADDIVANT verlängern u.a. die Lebensdauer von Kautschukvulkanisaten. Je nach Produkt schützen sie das fertige Bauteil temporär vor Ermüdungserscheinungen, die beispielsweise durch Hitze- und Ozoneinwirkung hervorgerufen werden können.

ELASTOMER COMPOUNDING SELECTOR GUIDEPolychloroprene | Natural & Synthetic Latex |

Adh

esiv

es

Conv

eyor

Bel

ts

Hos

es

Elec

tric

Cab

les

Foam

ed In

sula

tion

s

Tim

ing

Dri

ves

& V

-Bel

ts

Glo

ves

Mat

tres

ses

& P

illow

s

Carp

et B

ack

Adh

esiv

es

Elas

tic T

hrea

d

Phys

ical

For

m

FDA

App

rova

l

Euro

pean

Foo

dA

ppro

val

° ° ° ° °

• • • • •• • •

• • • • •

• ° ° ° °° ° ° °• • • • •• • • • •

•• • • • • •

° ° ° ° °

••

•

PW, FL,PS ✓

L, PW ✓

PW, GR ✓

L

PW ✓

FL, PS

PW, GR

L

PW, PL ✓

L ✓

L

L, PW ✓

FL

L

FL ✓

FL ✓

FL ✓

PS ✓

FL ✓

L ✓

L ✓

L

PW ✓

PW

Symbols

• Recommended use

° Suggested use

Physical Form:PW PowderGR GranularAM AmorphousPL PelletNDB Non Dust BlendL Liquid

Elastomer FoodContact

✓ = Product has foodcontact clearancein polyolefins in atleast one country.

For more specificapprovals, ask oursales/regulatory people.

47

TSE Industries Inc., ein 1962 gegründetes Familienunternehmen, produziert am Standort in Clearwater, Florida (USA) Gummi- und Kunststoffartikel, Förderbänder, Spezialchemikalien, Klebstoffe, Composite-Materialien und Millathane® und walzbaren Urethankautschuk.

Walzbares Polyurethan bietet dem Gummiverarbeiter die Möglichkeit, den Werkstoff Polyurethan auf klassischem Kautschuk-Equipment zu verarbeiten und somit von den Vorteilen dieses Werkstoffes zu profitieren (hohe Abriebbeständigkeit, hohe Verschleißfestigkeit, niedrige Gaspermeation und gute Reißfestigkeit).

POLYMER COMPARISON Property/Material Millable

UrethaneNeoprene Nitrile Natural rubber EPDM

Tensile strength E G-E F G-E F

Hardness range, Shore A 30-95+ 20-95 20-100 30-100 25-90

Max service temp °C Up to 120 120 120 100 175

Ozone resistance E F-G P P E

Oil Resistance E F E P P

Cut resistance E G F G G

Tear strength E G F G F

Compression set F-G G F-G F G

Abrasion E G-E F G-E F

Heat build-up F-G E P E F-G

Ratings:E-Excellent; G-Good; F-Fair; P-Poor

48

TSE Industries Inc., ein 1962 gegründetes Familienunternehmen, produziert am Standort in Clearwater, Florida (USA) Gummi- und Kunststoffartikel, Förderbänder, Spezialchemikalien, Klebstoffe, Composite-Materialien und Millathane® und walzbaren Urethankautschuk.

Walzbares Polyurethan bietet dem Gummiverarbeiter die Möglichkeit, den Werkstoff Polyurethan auf klassischem Kautschuk-Equipment zu verarbeiten und somit von den Vorteilen dieses Werkstoffes zu profitieren (hohe Abriebbeständigkeit, hohe Verschleißfestigkeit, niedrige Gaspermeation und gute Reißfestigkeit).

POLYMER COMPARISON Property/Material Millable

UrethaneNeoprene Nitrile Natural rubber EPDM

Tensile strength E G-E F G-E F

Hardness range, Shore A 30-95+ 20-95 20-100 30-100 25-90

Max service temp °C Up to 120 120 120 100 175

Ozone resistance E F-G P P E

Oil Resistance E F E P P

Cut resistance E G F G G

Tear strength E G F G F

Compression set F-G G F-G F G

Abrasion E G-E F G-E F

Heat build-up F-G E P E F-G

Ratings:E-Excellent; G-Good; F-Fair; P-Poor

49

BATCH OFFANTIHAFTBEHANDLUNG VON ROHMISCHUNGEN

VORDISPERGIERTE PRODUKTE:Gute Trennwirkung bei problematischen Mischungen Palettenlagerung mit hoher Beladung möglich Einfache Verdünnung und Dosierung des Konzentrats

AQUALUBE 21 5650 53 WKonzentrat / Pre-Dispersion mineral. Füllstoffe in WasserExzellente Trennwirkung auch bei sehr klebrigen MischungenHoher Benetzungsgrad / für alle gängigen Kautschuke geeignet

AQUALUBE 21 7540 S5 WKonzentrat / wässrige Lösung trennungsaktiver Bestandteilesauberer als mineral. Füllstoffdispersionen100% biologisch abbaubar

GUMMI- UND THERMOPLASTGRANULATETROCKEN UND NASSGRANULIERUNG

Vollständige Umhüllung der GranulateHohe Wirkung auch bei hohen GranulierungstemperaturenBiologisch abbaubare Produkte Lebensmittelzulassung

Am Standort S. Pietro Mosezzo, Italien produziert KEMI Spa Trennmittel für die kunststoffverarbeitende Industrie. Die umsatzstärksten Betätigungsfelder sind Trennmittel für die Polyurethan- sowie die Gummiindustrie. Traditionell gesehen ist KEMI einer der größten Lieferanten der Schuhindustrie.

Heute zählen im Segment der Kautschukverarbeitung ebenso Hersteller für Reifen, Hydraulikschläuche, Formschläuche, Antriebsriemen und geschäumte Latex Formartikel zu den Kunden der KEMI. Flexibilität, kundenspezifische Produktentwicklung und ein hoher Grad an technischem Service sind die besonderen Stärken dieses mittelständigen Unternehmens. Die Produktpalette umfasst Batch Off Trennmittel, Formtrennmittel auf Lösemittel- als auch Wasserbasis und silikonhaltige sowie silikonfreie Trennmittel.

50

BATCH OFFANTIHAFTBEHANDLUNG VON ROHMISCHUNGEN

VORDISPERGIERTE PRODUKTE:Gute Trennwirkung bei problematischen Mischungen Palettenlagerung mit hoher Beladung möglich Einfache Verdünnung und Dosierung des Konzentrats

AQUALUBE 21 5650 53 WKonzentrat / Pre-Dispersion mineral. Füllstoffe in WasserExzellente Trennwirkung auch bei sehr klebrigen MischungenHoher Benetzungsgrad / für alle gängigen Kautschuke geeignet

AQUALUBE 21 7540 S5 WKonzentrat / wässrige Lösung trennungsaktiver Bestandteilesauberer als mineral. Füllstoffdispersionen100% biologisch abbaubar

GUMMI- UND THERMOPLASTGRANULATETROCKEN UND NASSGRANULIERUNG

Vollständige Umhüllung der GranulateHohe Wirkung auch bei hohen GranulierungstemperaturenBiologisch abbaubare Produkte Lebensmittelzulassung

Am Standort S. Pietro Mosezzo, Italien produziert KEMI Spa Trennmittel für die kunststoffverarbeitende Industrie. Die umsatzstärksten Betätigungsfelder sind Trennmittel für die Polyurethan- sowie die Gummiindustrie. Traditionell gesehen ist KEMI einer der größten Lieferanten der Schuhindustrie.

Heute zählen im Segment der Kautschukverarbeitung ebenso Hersteller für Reifen, Hydraulikschläuche, Formschläuche, Antriebsriemen und geschäumte Latex Formartikel zu den Kunden der KEMI. Flexibilität, kundenspezifische Produktentwicklung und ein hoher Grad an technischem Service sind die besonderen Stärken dieses mittelständigen Unternehmens. Die Produktpalette umfasst Batch Off Trennmittel, Formtrennmittel auf Lösemittel- als auch Wasserbasis und silikonhaltige sowie silikonfreie Trennmittel.

SPRITZGUSS - FORMTRENNMITTELEinfache Entformung auch schwierig entformbarer Mischungenin allen gängigen Spritzgussprozessen.

AQUALUBE 27 0900 B0Wsemipermanentes Trennmittel speziell für FKMsilikonfrei / thermisch stabil bis >200°C

AQUALUBE 27 2660 Z6W

DORNTRENNMITTELFür die reibungslose Entformung von Schläuchen von flexiblen oder starren Dornen

AQUALUBE 24 1100 90 WGemisch aus hochmolekularen synth. PolymerenExzellente Gleiteigenschaftenhohe thermische Stabilitätbiologisch abbaubar

AQUALUBE 24 2430 00 NGemisch aus speziellen PolyethernExzellente Gleiteigenschaftenhohe thermische Stabilitätbiologisch abbaubar

TRENNMITTEL FÜR ANTRIEBSRIEMENFür die reibungslose Entformung von Riemen (V-belts, Poly-V, Synchronriemen für die Kfz-, Landwirtschafts-, Haushaltsindustrie )

AQUALUBE 25 0660 JO WEmulsion synth. PolymereSehr gute Entformungs- und Gleiteigenschaftenhohe thermische Stabilität

51

Safic-Alcan vertreibt eine umfangreiche Produktpalette für die Kautschukverarbeitung unter eigenen Markennamen. Marken wie VULCOFAC©, ALCHEM©, ALCANPLAST©, SAFICOLOR© etc… haben sich seit vielen Jahren in der Gummiindustrie etabliert und stehen für Produkte aus eigener Herstellung oder auch für „modifizierte“ Handelsware.

CONTENTS PRODUCTS FOR RUBBER AND PLASTICS

VULCOFAC Curing agents Page 48

ALCANPLAST Plasticizers Page 52

OFALUB Processing aids Page 55

SAFIC-CHEM Dry Liquids Page 55

SAFIC-CHEM Miscellaneous masterbatches Page 61

SAFIC-CHEM Antioxidants and Miscellaneous Page 62

SAFIC-CHEM Color masterbatches Page 64

SAFIC-CHEM Pre-weighted sachets Page 64

SAFIC-CHEM Perfumes/Odor neutralizers Page 65

SAFIC-CHEM Tackifying Resins Page 65

52

Safic-Alcan vertreibt eine umfangreiche Produktpalette für die Kautschukverarbeitung unter eigenen Markennamen. Marken wie VULCOFAC©, SAFIC-CHEM©, ALCANPLAST©, OFALUB© etc… haben sich seit vielen Jahren in der Gummiindustrie etabliert und stehen für Produkte aus eigener Herstellung oder auch für „modifizierte“ Handelsware.

VULCOFAC CURING AGENT

PRODUCT NAME CHEMICAL

DESCRIPTION

% ACTIVE

INGREDIENT

FORM PACKAGING

VULCOFAC HDC

VULCOFAC HDC MB 75

VULCOFAC HMDC DF

Hexamethylene diamine carbamate 100

75

98

Powder

Masterbatch

Dust free powder

Drums 30 kg

Boxes 25 kg

Drums 30 kg

VULCOFAC 13 PDM MB 70 dimaleimide 70 Granules

VULCOFAC CP 3441

VULCOFAC BPS

Phosphonium salt Sodium Carbonate 70

100

Powder

Powder

Boxes 20 kg

Drums 25 kg

VULCOFAC TZ 2,4,6-trimercapto – s - triazine 100 Powder Drums 30 kg

VULCOFAC TiBTD Tetra isobutyl thiuram disulfide 100 Granules Bag 25 kg

APPLICATIONS

VULCOFAC HDC, VULCOFAC HDC MB 75, VULCOFAC HMDC DF Blocked diamine usable for vulcanization of elastomers reacting with amines such as ethylene acrylate elastomers (VAMAC), bromobutyl, fluorinated rubbers, epichlorhydrins… The most currently used proportions are in the range of 0.8 to 2 phr, depending on the expected final properties of cured part.

VULCOFAC 13 PDM, VULCOFAC 13 PDM MB 70Primary curative for Hypalon synthetic rubber yielding good processing safety and stability, excellent compression set and oil resistance. Secondary accelerator and cure promoter in sulfur or sulfur donor curing system for CSM, improves state of cure in heat resistant compounds. Improves electrical properties of CSM cured with sulfur donor curing system. Coagent for peroxide curing system CSM, EPDM, CPE, AEM.

VULCOFAC CP 3441, VULCOFAC BPSCure system used for the vulcanization of epichlorhydrins and fluoroelastomers... Lead free curing system.

VULCOFAC TZCuring agent for ECO and ACM. It improves heat resistance. It offers a safe curing system alternative to Pbo/ETU

VULCOFAC TiBTDUltra accelerator for EPDM, SBR, NBR, NR

VULCOFAC CURING AGENT


DESCRIPTION

% ACTIVE

INGREDIENT

FORM PACKAGING

VULCOFAC HDC

VULCOFAC HDC MB 75

VULCOFAC HMDC DF

Hexamethylene diamine carbamate 100

75

98

Powder

Masterbatch

Dust free powder

Drums 30 kg

Boxes 25 kg

Drums 30 kg

VULCOFAC 13 PDM MB 70 dimaleimide 70 Granules

VULCOFAC CP 3441

VULCOFAC BPS

Phosphonium salt Sodium Carbonate 70

100

Powder

Powder

Boxes 20 kg

Drums 25 kg

VULCOFAC TZ 2,4,6-trimercapto – s - triazine 100 Powder Drums 30 kg

VULCOFAC TiBTD Tetra isobutyl thiuram disulfide 100 Granules Bag 25 kg

APPLICATIONS

VULCOFAC HDC, VULCOFAC HDC MB 75, VULCOFAC HMDC DF Blocked diamine usable for vulcanization of elastomers reacting with amines such as ethylene acrylate elastomers (VAMAC), bromobutyl, fluorinated rubbers, epichlorhydrins… The most currently used proportions are in the range of 0.8 to 2 phr, depending on the expected final properties of cured part.

VULCOFAC 13 PDM, VULCOFAC 13 PDM MB 70Primary curative for Hypalon synthetic rubber yielding good processing safety and stability, excellent compression set and oil resistance. Secondary accelerator and cure promoter in sulfur or sulfur donor curing system for CSM, improves state of cure in heat resistant compounds. Improves electrical properties of CSM cured with sulfur donor curing system. Coagent for peroxide curing system CSM, EPDM, CPE, AEM.

VULCOFAC CP 3441, VULCOFAC BPSCure system used for the vulcanization of epichlorhydrins and fluoroelastomers... Lead free curing system.

VULCOFAC TZCuring agent for ECO and ACM. It improves heat resistance. It offers a safe curing system alternative to Pbo/ETU

VULCOFAC TiBTDUltra accelerator for EPDM, SBR, NBR, NR

53

VULCOFAC AKTIVATORS


DESCRIPTION

% ACTIVE

INGREDIENT

BINDER FORM PACKAGING

VULCOFAC ACT 55 Blocked tertiary amine

complex

70 Silica Powder Boxes 20 kg

VULCOFAC ACT 66 Blocked tertiary amine

complex

Silica Powder Boxes 20 kg

VULCOFAC F45 Calcium hydroxide 100 Powder Boxes 20 kg

VULCOFAC DBU-70 1,8 diazabicyclo undecene 7 70 Silica Powder Drum 9 kg

APPLICATIONS

VULCOFAC ACT 55 / ACT 66 Tertiary amine complex (absorbed on silica carrier) which acts as activator for rubber compounds (mainly ethylene acrylate copolymers) in replacement of DOTG. The most currently used proportions are in the range of 1,5-2 phr. The efficiency of catalytical effect seems to be highter than the usual activators.

VULCOFAC F45 Crosslinking activator for fluoro-elastomers.

VULCOFAC DBU-70Curative for PU, activator in rubber industry.

54

VULCOFAC CO AGENTS


DESCRIPTION

% ACTIVE

INGREDIENT


VULCOFAC TAC

VULCOFAC TAC-50

VULCOFAC TAC-70

Triallyl cyanurate 100

50

70

Silica

Silica

Liquid

Powder

Powder

Bags 20 kg

VULCOFAC TAIC

VULCOFAC TAIC-50

VULCOFAC TAIC-70

Triallyl isocyanurate 100

50

70

Silica

Silica

Liquid

Powder

Powder

Bags 20 kg

APPLICATIONS

VULCOFAC TAC, VULCOFAC TAC-50, VULCOFAC TAC-70 Crosslinking enhancer for organic peroxide curing (EPDM, HEM, CPE, PO…)

VULCOFAC TAIC, VULCOFAC TAIC-50, VULCOFAC TAIC-70 Crosslinking agent for peroxide cured elastomers (FKM, EVA, CPE…)

VULCOFAC MISCELLANEOUS


DESCRIPTION

% ACTIVE

INGREDIENT


VULCOFAC MBI MB 80 2-mercaptobenzimidazole 80 Elastomer bound Granules Bags 25 kg

APPLICATIONS

VULCOFAC MBI MB 80Non-staining antioxidant. Gives very good protection against degradation due to heat.

55

VULCOFAC NITROSAMINE FREE ACCELERATOR / NITROSAMINE SAFE ACCELERATOR


DESCRIPTION

% ACTIVE

INGREDIENT


VULCOFAC CLD MB 80 N Caprolactam

Disulfide

80 Elastomer

bound

Granules Bags 25 kg

VULCOFAC ZDTP-70

VULCOFAC ZDTP

VULCOFAC ZBPD-70

Zinc-dialkyl

dithiophosphate

Zincdithiophosphate

70

100

70

Silica

Silica

Microgranulate

Liquid

Powder

Boxes 25 kg

Boxes 25 kg

VULCOFAC ZAP Zinc dithiophosphate

amine complex


APPLICATIONS

VULCOFAC CLD MB 80 NNitrosamine free sulfur donor for natural and synthetic rubber, with reversion resistant goods. Good aging characteristics and good compression set.

VULCOFAC ZDTP-70, VULCOFAC ZDTP, VULCOFAC ZBPD-70Nitrosamine free, non discolouring accelerator for EPDM and diene-rubbers. Easily replaces generators or highly toxic nitrosamines such as thiurams and carbamates. Used as a primary accelerator in conjunction with sulfenamides and/or thiazoles. Can be used in conjuction with sulfur donor Vulcofac CLD MB 80.

VULCOFAC ZAPNitrosamine free accelerator for EPDM and other diene rubbers.

VULCOFAC NITROSAMINE FREE ACCELERATOR / NITROSAMINE SAFE ACCELERATOR


DESCRIPTION

% ACTIVE

INGREDIENT


VULCOFAC CLD MB 80 N Caprolactam

Disulfide

80 Elastomer

bound

Granules Bags 25 kg

VULCOFAC ZDTP-70

VULCOFAC ZDTP

VULCOFAC ZBPD-70

Zinc-dialkyl

dithiophosphate

Zincdithiophosphate

70

100

70

Silica

Silica

Microgranulate

Liquid

Powder

Boxes 25 kg

Boxes 25 kg

VULCOFAC ZAP Zinc dithiophosphate

amine complex


APPLICATIONS

VULCOFAC CLD MB 80 NNitrosamine free sulfur donor for natural and synthetic rubber, with reversion resistant goods. Good aging characteristics and good compression set.

VULCOFAC ZDTP-70, VULCOFAC ZDTP, VULCOFAC ZBPD-70Nitrosamine free, non discolouring accelerator for EPDM and diene-rubbers. Easily replaces generators or highly toxic nitrosamines such as thiurams and carbamates. Used as a primary accelerator in conjunction with sulfenamides and/or thiazoles. Can be used in conjuction with sulfur donor Vulcofac CLD MB 80.

VULCOFAC ZAPNitrosamine free accelerator for EPDM and other diene rubbers.

56

(VULCOFAC ZAP 2) (non hazardous amine)

ALCANPLAST BEST COMPROMISE HIGH & LOW TEMPERATURE PLASTICIZERS

PRODUCT NAME COMPOSITION FORM PACKAGING

ALCANPLAST 188 Di ( butyl diglycol ) adipate Liquid Drums 200 kg

NYCOFLEX ADB30 Di (Butyl triglycol) adipate Liquid Drums 200 kg

ALCANPLAST PO 80 Ether - Ester Liquid Drums 200 kg

APPLICATIONS

ALCANPLAST 188Excellent low temperature plasticiser for NBR, CR, ACM, epichlorydrin, HNBR and HYPALON. Due to its relatively low volatility, ALCANPLAST 188 is very effective over a broad service temperature range. Excellent compatibility with a wide range of elastomers.

NYCOFLEX ADB30Excellent low temperature flexibility combined with very good permanency for Vamac, NBR, ACM, ECO, even after ageing at high temperature (150°C and more). High molecular weight monomeric plasticizer. Excellent compatibility with polar elastomers.

ALCANPLAST PO 80Excellent low temperature flexibility combined with very good permanency for NBR , ACM , ECO.

ALCANPLAST HIGH TEMPERATURE PLASTICIZERS


ALCANPLAST TOTM Stabilised tri-2-ethylhexyl trimellitate Liquid Drums 195 kg

ALCANPLAST 810 TM Trimellitate of C8-C10 linear Liquid Drums 190 kg

APPLICATIONS

ALCANPLAST TOTMHigh temperature plasticiser for NBR, CR, HBNR and CSM. Characterised by low volatility and good resis-tance to oxidation. It also demonstrates excellent resistance to extraction by water and shows extremely good migration (marring) resistance with a wide range of materials.

ALCANPLAST 810 TMSame characteristics as ALCANPLAST TOTM, but with better high temperature resistance.

57

ALCANPLAST MISCELLANEOUS PLASTICIZERS


ALCANPLAST BGF Di-butoxyethoxylethyl formal

(Butyl carbitol formal)

Liquid Drums 195 kg

ALCANPLAST DOA Di-2-ethylhexyl adipate Liquid Drums 190 kg

ALCANPLAST DOS Di-2-ethylhexyl sebacate Liquid Drums 190 kg

ALCANPLAST BUTYL OLEATE Isobutyl oleate Liquid Drums 180 kg

ALCANPLAST EPF 1,2 - Cyclohexandicarbonsäure Liquid Drums 180 kg

APPLICATIONS

ALCANPLAST BGFPlasticizer for extreme low temperature requirements (particularly for NBR and CR). ALCANPLAST BGF also provides resistance to fungal attack.

ALCANPLAST DOAEfficient low temperature plasticiser for nitrile (NBR) and polychloroprene (CR).

ALCANPLAST DOSEfficient low temperature plasticiser for all naturel and synthetic rubbers.

ALCANPLAST BUTYL OLEATEPlasticizer for low temperatures requirements (mainly polychloroprene CR).

ALCANPLAST EPF DOP replacement for polar elastomers, equivalent to Hexamoll® DINCH.

58

ALCANPLAST MISCELLANEOUS PLASTICIZERS


ALCANPLAST BGF Di-butoxyethoxylethyl formal

(Butyl carbitol formal)

Liquid Drums 195 kg

ALCANPLAST DOA Di-2-ethylhexyl adipate Liquid Drums 190 kg

ALCANPLAST DOS Di-2-ethylhexyl sebacate Liquid Drums 190 kg

ALCANPLAST BUTYL OLEATE Isobutyl oleate Liquid Drums 180 kg

ALCANPLAST EPF 1,2 - Cyclohexandicarbonsäure Liquid Drums 180 kg

APPLICATIONS

ALCANPLAST BGFPlasticizer for extreme low temperature requirements (particularly for NBR and CR). ALCANPLAST BGF also provides resistance to fungal attack.

ALCANPLAST DOAEfficient low temperature plasticiser for nitrile (NBR) and polychloroprene (CR).

ALCANPLAST DOSEfficient low temperature plasticiser for all naturel and synthetic rubbers.

ALCANPLAST BUTYL OLEATEPlasticizer for low temperatures requirements (mainly polychloroprene CR).

ALCANPLAST EPF DOP replacement for polar elastomers, equivalent to Hexamoll® DINCH.

OFALUB PROCESSING AIDS


OFALUB SEO Alkyl phosphate ester Pastilles Boxes 25 kg

OFALUB SMS Sorbitan Monostearate Pastilles Boxes 25 kg

OFALUB STA Stearylamine Flakes Boxes 25 kg

• All liquid ingredients are difficult to incorporate in standard rubber mixing operation.• "Dry liquids" are liquids, adsorbed on highly porous silica or silicate powder and the resultant product is a free flowing powder, even with 70 or 75% liquid. • You never have to handle highly viscous or tacky products and never have to heat or manage drums. • This presentation avoids losing some materials in the bottom of the drums.• The dosage is easier. • The safety of the operator is also improved, all the more so because they are preweighted. • You have also, in some cases, a shorter mixing time.

Usual carrier : silicaOther carriers available: carbon black , calcium silicate“F” : indicates a carbon black carrier “C” : indicates a calcium silicate carrier You can request tailor made products! It is also possible to ask for “dry blended liquids”.

VULCOFAC DRY LIQUIDS

APPLICATIONS

OFALUB SEOProcessing aid for Ethylene/acrylate copolymers formulation and other highly tacky elastomers. To be used together with stearylamine and stearic acid in VAMAC® and ACM.

OFALUB SMSProcessing aid for epichlorydrin elastomers formulation.

OFALUB STAProcessing aid for ethylene/acrylate copolymers formulation and other highly tacky elastomers.

59

VULCOFAC SILANES – COUPLING AGENTS

PRODUCT NAME ACTIVE INGREDIENTS % ACTIVE

INGREDIENTS

PACKAGING

VULCOFAC 69-70 Bis ( 3-triethoxysilylpropyl ) tetrasulfide 70 Boxes 20 kg

VULCOFAC 172-70 Vinyl tris ( 2-methoxyethoxy ) silane 70 Boxes 20 kg

VULCOFAC 189-70 Gamma-Mercaptopropyltrimethoxy silane 70 Boxes 20 kg

VULCOFAC A 1100-70 Gamma-Aminopropyltrimethoxy silane 70 Boxes 20 kg

VULCOFAC A 171-70 Vinyltrimethoxysilan 70 Boxes 20 kg

APPLICATIONS

VULCOFAC 69-70Coupling agent and reinforcing agent for sulfur cured compounds (especially) for tires and shoe soles formulations).

VULCOFAC 172-70Coupling agent in white mineral-filled compounds for peroxide cured rubber (especially recommended for EPDM cable formulations).

VULCOFAC 189-70Coupling agent for sulphur or metallic oxide cured rubbers (more effective than Si69 and more scorchy in final mixes).

VULCOFAC A 1100-70Coupling agent based on a bifunctional amine which can be used in Vamac, EVA, aqueous formulations.

VULCOFAC A 171-70Coupling agent for sulphur cured rubbers.

POSSIBILITY TO MAKE DRY LIQUIDS BASED ON ANY KIND OF LIQUID SILANES

• Gamma-Glycidoxypropyltrimethoxy silane (A 187 - GLYMO)• Gamma-Methacryloxypropyltrimethoxy silane (A 174 – GMEMO)• Vinyl triethoxy silane (A 151 – VTEO)• Vinyl trimethoxy silane (A 171 – VTMO)

60

VULCOFAC SILANES – COUPLING AGENTS

PRODUCT NAME ACTIVE INGREDIENTS % ACTIVE

INGREDIENTS

PACKAGING

VULCOFAC 69-70 Bis ( 3-triethoxysilylpropyl ) tetrasulfide 70 Boxes 20 kg

VULCOFAC 172-70 Vinyl tris ( 2-methoxyethoxy ) silane 70 Boxes 20 kg

VULCOFAC 189-70 Gamma-Mercaptopropyltrimethoxy silane 70 Boxes 20 kg

VULCOFAC A 1100-70 Gamma-Aminopropyltrimethoxy silane 70 Boxes 20 kg

VULCOFAC A 171-70 Vinyltrimethoxysilan 70 Boxes 20 kg

APPLICATIONS

VULCOFAC 69-70Coupling agent and reinforcing agent for sulfur cured compounds (especially) for tires and shoe soles formulations).

VULCOFAC 172-70Coupling agent in white mineral-filled compounds for peroxide cured rubber (especially recommended for EPDM cable formulations).

VULCOFAC 189-70Coupling agent for sulphur or metallic oxide cured rubbers (more effective than Si69 and more scorchy in final mixes).

VULCOFAC A 1100-70Coupling agent based on a bifunctional amine which can be used in Vamac, EVA, aqueous formulations.

VULCOFAC A 171-70Coupling agent for sulphur cured rubbers.

POSSIBILITY TO MAKE DRY LIQUIDS BASED ON ANY KIND OF LIQUID SILANES

• Gamma-Glycidoxypropyltrimethoxy silane (A 187 - GLYMO)• Gamma-Methacryloxypropyltrimethoxy silane (A 174 – GMEMO)• Vinyl triethoxy silane (A 151 – VTEO)• Vinyl trimethoxy silane (A 171 – VTMO)

VULCOFAC CO AGENTS

PRODUCT NAME ACTIVE INGREDIENTS

(Examples of trade name)

% ACTIVE

INGREDIENTS

PACKAGING

VULCOFAC AH-70 Liquid polybutadiene ( Lithene AH ) 70 Boxes 20 kg

VULCOFAC EGDMA-70 Ethylene glycol dimethacrylate ( SR 206 ) 70 Boxes 20 kg

VULCOFAC TMPTMA-70 Trimethylolpropane trimethacrylate ( SR 350 ) 70 Boxes 20 kg

APPLICATIONS

VULCOFAC AH-70Coagent and processing aid for peroxide cured rubber (especially recommended for EPDM formulations).

VULCOFAC EGDMA-70Difunctional methacrylate coagent for peroxide cured rubbers (especially recommanded in light and dark EPDM and CM compounds).

VULCOFAC TMPTMA-70Trifunctional methacrylate coagent for peroxide cured rubbers; it offers a better compression set than Alcanpoudre Saret 517-70 or Alcanpoudre Saret 519-70 (especially recommended in non polar rubber like EPDM, NBR, CSM…). POSSIBILITY TO MAKE DRY LIQUIDS BASED ON ANY KIND OF LIQUIDS• Liquid Polybutadiene (PB 3000),• Trifunctional monomer (Saret 500, Saret 517, Saret 519)• 1,4 butanediol dimethacrylate (SR 214),• Diethylene glycol dimethacrylate (SR 231),• 1,3 butylene glycol dimethacrylate(SR 297),• Ethoxylated bisphenol A diacrylate (SR 349),• Trimethylolpropane trimethacrylate (SR 350),• Dipentaerythritol penta acrylate (SR 399),• Trifunctional monomer ( Saret 515, Saret 521, Saret 1110, Saret 1116, Saret 1117 )

61

VULCOFAC ANTIOXIDANTS



% ACTIVE

INGREDIENTS

PACKAGING

VULCOFAC 688-70 Phenylene diamine ( UOP 688 ) 70 Boxes 20 kg

VULCOFAC 1520 DL70W Tri (mono/dinonylphenyl) phosphite (TNPP) 70 Boxes 20 kg

VULCOFAC BLW-70 Diphenylamine-acetone extract ( BLE 25 ) 70 Boxes 20 kg

SAFIC-CHEM 4 ADA FL 4-Aminodiphenylamin 100 Bags 25 kg

VULCOFAC W29-70 mixed styrented diphenylamines 70 Boxes 25 kg

VULCOFAC W29 4,4-Di(a-methylbenzyl)) diphenylamine 100 Drum 180 kg

APPLICATIONS

VULCOFAC 688-70Antioxidant and antiozonant which possess very good antiflex cracking properties and also a very good resistance for the extraction of water.

VULCOFAC 1520 DL70WAntioxidant which is usually associated with phenolic antioxidant and it inhibits discoloration of the poly-mer caused by some phenolic antioxidants.

VULCOFAC BLW-70Antioxidant with a high level of flex resistance and which is non blooming, especiallyrecommended in dark coloured compounds due to its staining properties.

SAFIC-CHEM 4 ADA FLAntioxidant especially suitable for AEM & ACM compounds; improved aging properties compared to com-monly used Antioxidants

VULCOFAC W29-70Dry Liquid of ALCANPOUDRE W29; provides resistance to heat and flex fatigue.

VULCOFAC W29 Antioxidant for resistance to heat and flex fatigue.

62

VULCOFAC ANTIOXIDANTS



% ACTIVE

INGREDIENTS

PACKAGING

VULCOFAC 688-70 Phenylene diamine ( UOP 688 ) 70 Boxes 20 kg

VULCOFAC 1520 DL70W Tri (mono/dinonylphenyl) phosphite (TNPP) 70 Boxes 20 kg

VULCOFAC BLW-70 Diphenylamine-acetone extract ( BLE 25 ) 70 Boxes 20 kg

SAFIC-CHEM 4 ADA FL 4-Aminodiphenylamin 100 Bags 25 kg

VULCOFAC W29-70 mixed styrented diphenylamines 70 Boxes 25 kg

VULCOFAC W29 4,4-Di(a-methylbenzyl)) diphenylamine 100 Drum 180 kg

APPLICATIONS

VULCOFAC 688-70Antioxidant and antiozonant which possess very good antiflex cracking properties and also a very good resistance for the extraction of water.

VULCOFAC 1520 DL70WAntioxidant which is usually associated with phenolic antioxidant and it inhibits discoloration of the poly-mer caused by some phenolic antioxidants.

VULCOFAC BLW-70Antioxidant with a high level of flex resistance and which is non blooming, especiallyrecommended in dark coloured compounds due to its staining properties.

SAFIC-CHEM 4 ADA FLAntioxidant especially suitable for AEM & ACM compounds; improved aging properties compared to com-monly used Antioxidants

VULCOFAC W29-70Dry Liquid of ALCANPOUDRE W29; provides resistance to heat and flex fatigue.

VULCOFAC W29 Antioxidant for resistance to heat and flex fatigue.

VULCOFAC MISCELLANEOUS



% ACTIVE

INGREDIENTS

PACKAGING

VULCOFAC 10-70 Polybutene ( Indopol H100 ) 70 Boxes 20 kg

VOLCOFAC 828-70 Epoxy resin ( Epikote 828 ) 70 Boxes 20 kg

VULCOFAC 1312-70 Liquid butadiene acrylonitrile polymer ( Nipol 1312 ) 70 Boxes 20 kg

VULCOFAC G131-70 Liquid Polysulfid Polymer 70 Boxes 20 kg

VULCOFAC RRP Resorcinol based bonding agent 70 Boxes 20 kg

APPLICATIONS

VULCOFAC 10-70Isobutylene/butene copolymer used as tackifier at high concentration or as plasticizer at low concentration in non polar rubber (SBR, EPDM, IR, BR, NR…).

VULCOFAC 828-70Epoxy resin used in CSM formulations in the replacement of the lead oxide system.

VULCOFAC 1312-70Non extractable plasticizer based on a low molecular weight NBR liquid; especially recommended in CR, NBR for rubber rollers, timing belt and sponge formulations.

VULCOFAC G131-70Liquid polysulfide used in the NBR and CR formulations for off-set printing blanket.

VULCOFAC RRPBonding agent based on resorcinol, hexamethylolmelamine blend and mainly used for bonding rubber-textile.

POSSIBILITY TO MAKE DRY LIQUIDS BASED ON ANY KIND OF LIQUIDS• Tetrabutylthiuram disulfide (TBUT)• Tributyl thiourea, Chlorinated paraffin (TRIBTU)• Hexa methoxy methyl melamine ( HMMM )• Petrolatum Jelly• Triethanolamine (TEA)• Zinc Dibutyl Dithiophosphate (ZBPD)• Chlorinated paraffin (C48)

63

APPLICATIONS

SAFIC-CHEM MBPA-2Heat resistant (slightly staining) antioxidant.

SAFIC-CHEM MMBIAntioxidant used for NR, IR, BR, SBR, NBR

SAFIC-CHEM OMBAntioxidant used in synthetic rubber (SBR, BR, IR, NBR), latices stabilizing agent in polyacetates, ABS.

ALCHEM ZMMBIUsed sinergistically with other antioxydants for heat resistant thiuram cured goods.

SAFIC-CHEM ANTIOXIDANTS

PRODUCT NAME CHEMICAL DESCRIPTION % ACTIVE

INGREDIENTS

FORM PACKAGING

ALCHEM EW 3100 Diaryl-p-phenylenediamines mixture 100 Powder Bags 25 kg

ALCHEM MBPA-2 4,4-bis (1,1-dimethyl-benzine) dihphenylamine 100 Powder Bags 25 kg

ALCHEM MMBI Methyl-2 mercaptobenzimidazole 100 Powder Bags 25 kg

ALCHEM OMB 2-2-methylene bis (4-methyl 6 terbutylphenol) 100 Powder Bags 25 kg

ALCHEM TMQ 2,2,4-trimethyl-1,2-dihydroquinoline 100 Powder Bags 15 kg

ALCHEM ZMMBI Zinc methyl mercaptobenzimidazole 100 Powder Bags 10 kg

SAFITACK TACKIFYING RESINS

PRODUCT NAME CHEMICAL DESCRIPTION FORM PACKAGING

SAFITACK C5 C5 hydrocarbon resin Granule Bags 25 kg

SAFITACK C9 C9 hydrocarbon resin Flake Bags 25 kg

APPLICATIONS

SAFITACK C5Aliphatic resin used as Tackifier/processing aid for rubber.

SAFITACK C9Aromatic resin used as Tackifier/processing aid for Rubber.

SAFIC-CHEM MASK PERFUMES / ODOR NEUTRALIZERS

Perfumes Reodorant ProductsPRODUCT NAME FORM PACKAGING

SAFIC-CHEM MASK Lavender Liquid Drums 25 kg

SAFIC-CHEM MASK Pine Liquid Drums 25 kg

SAFIC-CHEM MASK Strawberry Liquid Drums 25 kg

SAFIC-CHEM MASK Vanilla Liquid Drums 25 kg

SAFIC-CHEM MASK Leather Liquid Drums 25 kg

Odor NeutralizersPRODUCT NAME FORM PACKAGING

SAFIMASK AX Hydrosoluble Liquid Drums 25 kg

APPLICATIONSRubber , plastic , coating , water treatment , detergency , cosmetic. Toll manufactured mixture. Blend of natural or synthetic perfumes in solvent or aqueous phase. POSSIBILITY TO MAKE OTHER SAFIC-CHEM MASKSAFIC-CHEM MASK Grape-Fruit, Lemon, Green Apple, Orange, Peach, Mimosa, Menthol, Eucalyptus …

64


INGREDIENTS

FORM PACKAGING

SAFIC-CHEM MBPA-2 4,4-bis (1,1-dimethyl-benzine) dihphenylamine 100 Powder Bags 25 kg

SAFIC-CHEM MMBI Methyl-2 mercaptobenzimidazole 100 Powder Bags 25 kg

SAFIC-CHEM OMB 2-2-methylene bis (4-methyl 6 terbutylphenol) 100 Powder Bags 25 kg

SAFIC-CHEM ZMMBI Zinc methyl mercaptobenzimidazole 100 Powder Bags 25 kg

SAFIC-CHEM MBPA-2 Heat resistant (slightly staining) antioxidant.

SAFIC-CHEM MMBI Antioxidant used for NR, IR, BR, SBR, NBR

SAFIC-CHEM OMB Antioxidant used in synthetic rubber (SBR, BR, IR, NBR), latices stabilizing agent in polyacetates, ABS.

SAFIC-CHEM ZMMBI Used sinergistically with other antioxydants for heat resistant thiuram cured goods.

APPLICATIONS

VULCOFAC TACKIFIERS



% ACTIVE

INGREDIENTS

PACKAGING

ALCANPOUDRE AD 15-70 Tackifier ( Nevchem AD 15 ) 70 Boxes 20 kg

ALCANPOUDRE PLCT-70 Pale liquid coumaron tackifier 70 Boxes 20 kg

ALCANPOUDRE PT-70 Pine tar 70 Boxes 20 kg

APPLICATIONS

ALCANPOUDRE AD 15-70Highly viscous hydrocarbon resin used to improve the processing characteristics and tach of CR, CSM, EPDM, IIR, NBR, SBR, NR.

ALCANPOUDRE PLCT-70Dispersing and tackifying agent which improves the tack of rubber like NR, SBR, BR, EPDM; low softening point.

ALCANPOUDRE PT-70Tackifier for rubber compounds.

ALCANPOUDRE PLASTICIZERS



% ACTIVE

INGREDIENTS

PACKAGING

ALCANPOUDRE 2280-70 Highly Refined Mineral Parafinic Oil 70 Boxes 20 kg

ALCANPOUDRE DINP-70 Di isononyl phtalate 70 Boxes 20 kg

APPLICATIONS

ALCANPOUDRE 2280-70Paraffinic oil used as plasticizer in NR, IR, EPDM compounds.

ALCANPOUDRE DINP-70Phtalate plasticizer used in polymer and rubber industry. POSSIBILITY TO MAKE DRY LIQUIDS BASED ON ANY KIND OF LIQUIDS• Phtalates (DOP, DIDP, DBP…)• Mineral oils (aromatic oils, naphtenic oils, parrafinic oils)• Trimellitates (TOTM, 7/9 TM, 8/10 TM...)• Polymeric plasticizers (polyester adipates, polyester sebaçates...)



% ACTIVE

INGREDIENTS

PACKAGING

VULCOFAC PLCT DL70 Pale liquid coumaron tackifier 70 Boxes 20 kg

VULCOFAC PT DL70 Methyl-2 mercaptobenzimidazole 70 Boxes 20 kg

VULCOFAC PLCT DL70 Dispersing and tackifying agent which improves the tack of rubber like NR, SBR, BR, EPDM; low softening point.

VULCOFAC PT DL70 Tackifier for rubber compounds.

APPLICATIONS

APPLICATIONS

SAFIC-CHEM MBPA-2Heat resistant (slightly staining) antioxidant.

SAFIC-CHEM MMBIAntioxidant used for NR, IR, BR, SBR, NBR

SAFIC-CHEM OMBAntioxidant used in synthetic rubber (SBR, BR, IR, NBR), latices stabilizing agent in polyacetates, ABS.

ALCHEM ZMMBIUsed sinergistically with other antioxydants for heat resistant thiuram cured goods.

SAFIC-CHEM ANTIOXIDANTS


INGREDIENTS

FORM PACKAGING

ALCHEM EW 3100 Diaryl-p-phenylenediamines mixture 100 Powder Bags 25 kg

ALCHEM MBPA-2 4,4-bis (1,1-dimethyl-benzine) dihphenylamine 100 Powder Bags 25 kg

ALCHEM MMBI Methyl-2 mercaptobenzimidazole 100 Powder Bags 25 kg

ALCHEM OMB 2-2-methylene bis (4-methyl 6 terbutylphenol) 100 Powder Bags 25 kg

ALCHEM TMQ 2,2,4-trimethyl-1,2-dihydroquinoline 100 Powder Bags 15 kg

ALCHEM ZMMBI Zinc methyl mercaptobenzimidazole 100 Powder Bags 10 kg

SAFITACK TACKIFYING RESINS

PRODUCT NAME CHEMICAL DESCRIPTION FORM PACKAGING

SAFITACK C5 C5 hydrocarbon resin Granule Bags 25 kg

SAFITACK C9 C9 hydrocarbon resin Flake Bags 25 kg

APPLICATIONS

SAFITACK C5Aliphatic resin used as Tackifier/processing aid for rubber.

SAFITACK C9Aromatic resin used as Tackifier/processing aid for Rubber.

SAFIC-CHEM MASK PERFUMES / ODOR NEUTRALIZERS

Perfumes Reodorant ProductsPRODUCT NAME FORM PACKAGING

SAFIC-CHEM MASK Lavender Liquid Drums 25 kg

SAFIC-CHEM MASK Pine Liquid Drums 25 kg

SAFIC-CHEM MASK Strawberry Liquid Drums 25 kg

SAFIC-CHEM MASK Vanilla Liquid Drums 25 kg

SAFIC-CHEM MASK Leather Liquid Drums 25 kg

Odor NeutralizersPRODUCT NAME FORM PACKAGING

SAFIMASK AX Hydrosoluble Liquid Drums 25 kg

APPLICATIONSRubber , plastic , coating , water treatment , detergency , cosmetic. Toll manufactured mixture. Blend of natural or synthetic perfumes in solvent or aqueous phase. POSSIBILITY TO MAKE OTHER SAFIC-CHEM MASKSAFIC-CHEM MASK Grape-Fruit, Lemon, Green Apple, Orange, Peach, Mimosa, Menthol, Eucalyptus …

65

VULCOFAC TACKIFIERS



% ACTIVE

INGREDIENTS

PACKAGING

ALCANPOUDRE AD 15-70 Tackifier ( Nevchem AD 15 ) 70 Boxes 20 kg

ALCANPOUDRE PLCT-70 Pale liquid coumaron tackifier 70 Boxes 20 kg

ALCANPOUDRE PT-70 Pine tar 70 Boxes 20 kg

APPLICATIONS

ALCANPOUDRE AD 15-70Highly viscous hydrocarbon resin used to improve the processing characteristics and tach of CR, CSM, EPDM, IIR, NBR, SBR, NR.

ALCANPOUDRE PLCT-70Dispersing and tackifying agent which improves the tack of rubber like NR, SBR, BR, EPDM; low softening point.

ALCANPOUDRE PT-70Tackifier for rubber compounds.

ALCANPOUDRE PLASTICIZERS



% ACTIVE

INGREDIENTS

PACKAGING

ALCANPOUDRE 2280-70 Highly Refined Mineral Parafinic Oil 70 Boxes 20 kg

ALCANPOUDRE DINP-70 Di isononyl phtalate 70 Boxes 20 kg

APPLICATIONS

ALCANPOUDRE 2280-70Paraffinic oil used as plasticizer in NR, IR, EPDM compounds.

ALCANPOUDRE DINP-70Phtalate plasticizer used in polymer and rubber industry. POSSIBILITY TO MAKE DRY LIQUIDS BASED ON ANY KIND OF LIQUIDS• Phtalates (DOP, DIDP, DBP…)• Mineral oils (aromatic oils, naphtenic oils, parrafinic oils)• Trimellitates (TOTM, 7/9 TM, 8/10 TM...)• Polymeric plasticizers (polyester adipates, polyester sebaçates...)


INGREDIENTS

FORM PACKAGING

SAFIC-CHEM CTPI N – (Cyclohexylthio) phtalimide 100 Powder Bags 25 kg

VULCOFAC CTPI 80 N – (Cyclohexylthio) phtalimide 80 Granule Bags 25 kg

SAFIC-CHEM CBS OP N – Cyclohexyl-2-benzothiazolsufenamid min. 98 Powder Bags 25 kg

SAFIC-CHEM OP Dibenzothiazyldisulfid min. 98 Powder Bags 25 kg

SAFIC-CHEM OP Tetramethylthiurammonosulfid min. 98 Powder Bags 25 kg

SAFIC-CHEM REC N-Phenyl-N-(trichlormethylsulfenyl)

benzosulfenamid auf CaCO3

min. 98 Powder Bags 25 kg

SAFIC-CHEM TBSI OP N – (2-Benzothiazolylthio) - N

(1,1 - dimethylethyl) - 2- benzothiazolsulfenamid

min. 90 Powder Bags 25 kg

SAFIC-CHEM / VULCOFAC

SAFIC-CHEM COLOUR MASTERBATCHES

PRODUCT NAME PIGMENT COLOR INDEX % ACTIVE

INGREDIENTS


SAFIC-CHEM R103 Red PR 53:1 50 SBR 1502 Slab Boxes 20 kg


SAFIC-CHEM R202 Orange PO:16 50 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R316 Yellow PY:13 50 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R704 Violet PV:23 40 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R421 Green PG:7 50 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R512 Blue PB:15 50 SBR 1502 Slab Boxes 20 kg

APPLICATIONSColor additives on a polymer binder (SBR) used in rubber compounds (NR, SBR, EVA…) for shoe soles, toys…

SAFIBLEND PRE WEIGHTED SACHET Customised blends of “powder”, “liquids” or “granules” chemical additives (curatives, antidegradants,waxes, zinc oxide…) weighted into low melt sachets to specified tolerances.

Help to reduce overall costs• Increased productivity• Reduced customer weighting• Reduction in scrap/re-work• Reduction in mixing operation• Reduced waste disposal Packaging waste obligations reduced (Legislation)• Reduced supplier base

Help to meet the Health Safety and Environmental obligations• Employees no longer handle hazardous chemicals• Dust free working environment

Improve confidentiality• Zero exposure of sensitive formulations to employees or outsiders• Pre weighted chemical blends contain proprietary chemicals in proprietary ratios

66

SAFIC-CHEM COLOUR MASTERBATCHES

PRODUCT NAME PIGMENT COLOR INDEX % ACTIVE

INGREDIENTS




SAFIC-CHEM R202 Orange PO:16 50 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R316 Yellow PY:13 50 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R704 Violet PV:23 40 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R421 Green PG:7 50 SBR 1502 Slab Boxes 20 kg

SAFIC-CHEM R512 Blue PB:15 50 SBR 1502 Slab Boxes 20 kg

APPLICATIONSColor additives on a polymer binder (SBR) used in rubber compounds (NR, SBR, EVA…) for shoe soles, toys…

SAFIBLEND PRE WEIGHTED SACHET Customised blends of “powder”, “liquids” or “granules” chemical additives (curatives, antidegradants,waxes, zinc oxide…) weighted into low melt sachets to specified tolerances.

Help to reduce overall costs• Increased productivity• Reduced customer weighting• Reduction in scrap/re-work• Reduction in mixing operation• Reduced waste disposal Packaging waste obligations reduced (Legislation)• Reduced supplier base

Help to meet the Health Safety and Environmental obligations• Employees no longer handle hazardous chemicals• Dust free working environment

Improve confidentiality• Zero exposure of sensitive formulations to employees or outsiders• Pre weighted chemical blends contain proprietary chemicals in proprietary ratios

NOTIZEN KONTAKT

Bernhard HoyerGeschäftsführer/Managing DirectorTel. +49 (0) 671 / 79 46 13-23Mobil +49 (0) 170 / 2 40 55 48E-Mail: [email protected]

Torsten HellerVerkaufsleiter/Sales ManagerTel. +49 (0) 671 / 79 46 13-25Mobil +49 (0) 152 / 09 12 01 00E-Mail: [email protected]

Diem DemirciTechnischer Verkauf/Technical SalesTel. +49 (0) 62 49 / 8 05 89 00Mobil +49 (0) 171 / 6 72 79 21E-Mail: [email protected]

Achim BartschTechnischer Verkauf/Technical SalesTel. +49 (0) 24 21 / 5 00 20 28Mobil +49 (0) 170 / 2 39 19 98E-Mail: [email protected]

Birgit Andrea HolczerTechnischer Verkauf/Technical SalesMobil +49 (0) 172 / 2 63 48 30E-Mail: [email protected]

67

Safic-Alcan Deutschland GmbH

Wolfsheimer Str. 1 55543 Bad Kreuznach - Germany

Telefon (+49) 0671 79 46 13 0 Fax (+49) 0671 48 34 52 4 Email [email protected]

www.safic-alcan.de

Documents

Kleb- und Dichtstoffe Lacke Polyurethan Kosmetik ...€¦ · Safic-Alcan Deutschland GmbH, Bad Kreuznach Das Unternehmen wurde im Jahre 1972 von J.E. Göbel und W. Pfrengle mit dem