Upload
truonghanh
View
228
Download
2
Embed Size (px)
Citation preview
KITCHEN ACCESSORIES
Version KA.1.0southern
architectural hardware
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
2
Space saving
solutions for
your kitchen
Space saving
solutions for
your kitchen
Southern Architectural Hardware is a specialist importer and distributor of
joinery and architectural hardware. We work closely with our supply partners,
both nationally and globally, to bring you products that provide solutions to
your needs.
On the following pages you will see innovative space saving ideas for your
kitchen, as well as the reputable Veronar Sinkware Range.
Castella is our renowned architectural cabinetware brand, specifically designed
to enhance Australia’s fine homes and buildings. For more information on
Castella visit www.castella.net.au or call us on 1800 061 787.
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
3
Reward yourself... enhance your kitchen.
ContentsWaste Bins 4-10
Impala Cutlery Trays 11-14
Plastic Cutlery Trays 15-16
Calima Grey Insert Cutlery Trays 16-20
Non-slip Matting 20
Wireware 21-22
Pull Out Pantry 23
Wire Drawers 23
Corner Units 24-27
Tea Towel Rails 28
Wire Wine Glass Rack 29
Pullout Ironing Board 29
Laundry Basket 30
Veronar Sinks 31-33
Sink Mixers 34
Sink Accessories 35
Kitchen AccessoriesVersion KA.1.0
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
4
KITCHEN BINS
 2 x 35L and 2 x 7.5L removable bins  Concealed full extension soft close slides  Suits 600mm module width  568mm internal cabinet width  500mm deep and 560mm high  505mm minimum internal cabinet depth  Integrated handles that act as a holder for a bin liner  Large adjustable door mount brackets  Made in Italy
SIGE Waste Bin - 85L
SIGE Waste Bin - 70L  2 x 35L removable bins  Concealed full extension soft close slides  Suits 450mm module width  418mm internal cabinet width  500mm deep and 560mm high  505mm minimum internal cabinet depth  Integrated handles that act as a holder for a bin liner  Large adjustable door mount brackets  Made in Italy
Part No: 13.10.573
Part No: 13.10.571
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
5
KITCHEN BINS
 1 x 8L, 1 x 12L and 1 x 16L removable bins  Concealed full extension soft close slides  Suits 600mm module width  568mm internal cabinet width  400mm deep to clear pipes in under-sink situation  405mm high  455mm minimum internal cabinet depth  Roll-out shelf above bin  Large adjustable door mount brackets  Made in Italy
SIGE Waste Bin - 36L
SIGE Waste Bin - 35L  1 x 35L removable bin  Concealed full extension soft close slides  Suits 300mm module width  268mm internal cabinet width  500mm deep and 560mm high  505mm minimum internal cabinet depth  Integrated handles that act as a holder for a bin liner  Large adjustable door mount brackets  Made in Italy
Part No: 13.10.575
Part No: 13.10.574
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
6
Hideaway Bin - Door Mount
Hideaway Bin - with Handle
Part No: 13.10.108
Part No: 13.10.107
• White Kitchen King Waste Bin• Single large bin - 50L• Bag retainer• Minimum space required:
Width: 340mm Height: 625mm Depth: 415mm
 45kg Load rating ÂWith handle  Soft close
ÂWhite Kitchen King Waste Bin  Single large bin - 50L  Bag retainer  Minimum space required:
Width: 340mm Height: 625mm Depth: 415mm
 45kg Load rating ÂWith door mount  Soft close
KITCHEN BINS
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
7
Veronar Short Twin Bin  Heavy duty self closing full extension slides  2 x 15L removable bins ÂWhite plastic bins, white powder coated metal frame  Minimum space required:
Width: 345mm Height: 340mm Depth: 485mm
Part No: 13.10.340
Veronar Twin Bin  Heavy duty self closing full extension slides  2 x 20L removable bins ÂWhite plastic bins, white powder coated metal frame  Minimum space required:
Width: 345mm Height: 420mm Depth: 480mm
Part No: 13.10.420
KITCHEN BINS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
8
Plastic Frame Twin Bin  2 x 35L bin  Sturdy hi-impact plastic frame  Removable plastic bins  To suit left or right opening  Self closing runners  Height: 340mm  Depth: 525mm ÂWidth: 320mm  25kg load rating
Part No: 13.10.008
KITCHEN BINS
Metal Frame Twin Bin  2 x 15L removable bins  Top / bottom mounting, right / left opening  Self closing runners  Robust, solid tubular metal frame  Height: 340mm  Depth: 525mm ÂWidth: 350mm  25kg load rating
Part No: 13.10.006
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
9
SS Concealed Waste Bin  10L bin  Automatic opening lid  Removable plastic bin  Stainless Steel  Right or left opening  Height: 325mm (closed)  Depth: 280mm ÂWidth: 357mm (includes bracket)
 10L bin  Automatic opening lid  Removable plastic bin  Right or left opening  Height: 325mm (closed)  Depth: 280mm ÂWidth: 357mm (includes bracket)
White Concealed Waste Bin
Part No: 13.10.002
Part No: 13.10.001
KITCHEN BINS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
10
Benchtop Bin  High quality stainless steel lid and surround  10L Bucket included  Bucket removable through top of bench  Easily fitted into a new or existing benchtop  Rubber seal prevents unwanted odours  Accommodates standard type bags  Hole cut out size: 210mm diameter  Depth: 300mm
Part No: 13.10.013
KITCHEN BINS
Single Slide Out Bin  1 x 15L removable bins  Slim construction suits cupboards 300mm wide  Robust, pressed metal construction  Smooth running ball race runners  Height: 334mm  Depth: 390mm ÂWidth: 266mm
Part No: 13.10.012
13.10.013 installed
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
11
Single Row Cutlery Organiser
Part No: 15.83.500
 Contains: 1 outer organiser 3 of 88mm x 264mm inserts 3 of 88mm x 176mm inserts
 Inner trays are removable for ease of cleaning  Can be set a variety of ways to suit your needs  304 grade stainless steel  Suits many drawer systems including Harn Triomax, Blum Tandembox  Overall length 473mm  Overall width 280mm
Triple Row Cutlery Organiser
Part No: 15.82.500
 Contains: 1 outer organiser 1 of 88mm x 264mm insert 1 of 88mm x 176mm insert
 Inner trays are removable for ease of cleaning  Can be set a variety of ways to suit your needs  304 grade stainless steel  Suits many drawer systems including Harn Triomax, Blum Tandembox  Overall length 473mm  Overall width 103mm
IMPALA CUTLERY TRAYS
Please see page 19 for Non-Slip matting
DRAWER ORGANISERS
JUNE 200 8
DRAWER ORGANISERS
JUNE 200 8
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
12
Triple Row Cutlery Organiser - with extra section
Extra Stainless Steel Inserts
Part No: 15.89.500
 Contains: 2 outer organisers 3 of 88mm x 264mm inserts 3 of 88mm x 176mm inserts 1 of 88 x 473 side panel
 Inner trays are removable for ease of cleaning  Can be set a variety of ways to suit your needs  304 grade stainless steel  Suits many drawer systems including Harn Triomax, Blum Tandembox  Overall length 473mm  Overall width 377mm
3. 88mm x 88mm stainless steel insert1 2 3
Part No: 15.80.030
2. 88mm x 176mm stainless steel insert
Part No: 15.80.020
1. 88mm x 264mm stainless steel insert
Part No: 15.80.010
DRAWER ORGANISERS
JUNE 200 8
DRAWER ORGANISERS
JUNE 200 8
Please see page 20 for Non-Slip mattingPlease see page 20 for Non-Slip matting
IMPALA CUTLERY TRAYS
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
13
Part No: 15.84.500
Single Row Centre Cutlery Organiser
Dividing systems for fitting in the centre of the drawer between the outer organizers allows you to utilise the complete width of the drawer.
 Single row can be added to cutlery organiser or used individually  Can be set a variety of ways to suit your needs  Overall length 473mm  Overall width 105mm
Dividing systems for fitting in the centre of the drawer between the outer organisers allows you to utilise the complete width of the drawer.
 Double row can be added to cutlery organiser or used individually  Can be set a variety of ways to suit your needs  Overall length 473mm  Overall width 202mm
Double Row Centre Cutlery Organiser
Part No: 15.85.500
DRAWER ORGANISERS
JUNE 200 8
DRAWER ORGANISERS
JUNE 200 8
Please see page 20 for Non-Slip matting
IMPALA CUTLERY TRAYS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
14
Part No: 15.86.500
Large Double Row Centre Cutlery Organiser
2
3
1Part No. Description Size Finish15.80.090 End Component 88mm L DG
15.80.080 End Component 176mm L DG
15.80.050 Inner Divider 88mm L DG
15.80.060 Inner Divider 176mm L DG
15.80.070 Side Panel 473mm L SS
Extra/spare components so you can add to the standard options or customise in your own way
Extra Components
1
2
3
DRAWER ORGANISERS
JUNE 200 8
DRAWER ORGANISERS
JUNE 200 8
Please see page 20 for Non-Slip matting
Dividing systems for fitting in the centre of the drawer between the outer organizers allows you to utilise the complete width of the drawer.
 Large double row can be added to cutlery organiser or used individually  Can be set a variety of ways to suit your needs
IMPALA CUTLERY TRAYS
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
15
Part No. Description Size Finish15.80.090 End Component 88mm L DG
15.80.080 End Component 176mm L DG
15.80.050 Inner Divider 88mm L DG
15.80.060 Inner Divider 176mm L DG
15.80.070 Side Panel 473mm L SS
CUTLERY TRAYS
Eco Cutlery Tray
ÂWhite Texture Finish  Height: 60mm  Depth: 411mm - 485mm  2.5mm thick
Deluxe Cutlery Tray
Part No: 15.10.450
ÂWhite Gloss Finish  Depth: 346mm - 435mm ÂWidth: 306mm - 450mm  Height: 58mm
Part No. Description15.20.240 Width 200mm - 240mm
15.20.290 Width 250mm - 290mm
15.20.340 Width 300mm - 340mm
15.20.390 Width 350mm - 390mm
15.20.440 Width 400mm - 440mm
15.20.490 Width 450mm - 490mm
15.20.540 Width 500mm - 540mm
Please see page 20 for Non-Slip matting
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
16
CUTLERY TRAYS
Moulded Spice Bottle Inserts
ÂWhite Gloss Finish  3.8mm Thick  Depth: 435 - 485mm  Height: 75mm
Double Cutlery Tray
Part No. Description15.30.390 Width 340mm - 390mm
15.30.540 Width 490mm - 540mm`
ÂWhite spice tray  Fits drawers up to 1300mm wide  3.0mm thick  Can be cut to width  Depth: 1300mm x 550mm deep  Height: 45mm
Part No: 15.40.550
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
17
Part No: 15.50.500
Calima Grey Insert - 450mm  Suits Harn Triomax or Blum Tandembox drawers ÂWidth: 368mm  Length: 474mm  Height: 60mm
Part No: 15.50.450
Calima Grey Insert - 500mm  Suits Harn Triomax or Blum Tandembox drawers ÂWidth: 418mm  Length: 474mm  Height: 60mm
CUTLERY TRAYS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
18
CUTLERY TRAYS
Calima Grey Insert - 600mm  Suits Harn Triomax or Blum Tandembox drawers ÂWidth: 518mm  Length: 474mm  Height: 60mm
Part No: 15.50.600
Calima Grey Insert - 900mm  Suits Harn Triomax or Blum Tandembox drawers ÂWidth: 818mm  Length: 474mm  Height: 60mm
Part No: 15.50.900
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
19
Comfort Grey Insert - 450mm ÂWidth: 368mm  Length: 474mm  Height: 60mm
Comfort Grey Insert - 500mm ÂWidth: 418mm  Length: 474mm  Height: 60mm
Part No: 15.60.500
Part No: 15.60.450
CUTLERY TRAYS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
20
CUTLERY TRAYS
Non Slip Matting  Non-slide drawer liner  Non-slide top and bottom surface  High-quality grey polystyrene rubber  Meets kitchen furniture industry requirements  Heat resistant  474mm wide  Sold by the metre or in 5m lengths
Part No: 15.10.100
Comfort Grey Insert - 600mm ÂWidth: 518mm  Length: 474mm  Height: 60mm
Part No: 15.60.600
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
21
WIREWARE
Side Mounted Rollout  Full extension side mounted ball bearing slides  2 Adjustable baskets  Suggested loading 30kg total  Universal mounting (left or right)  Minimum internal cabinet depth 475mm  Minimum internal cabinet height 570mm  Basket height 85mm  Basket depth 470mm  Chrome plated
Part No. Min Int Cabinet Basket Sizes11.10.200 168mm 2 x 110mm W
11.10.250 268mm 1 x 200mm W & 1 x 110mm W
11.10.300 268mm 2 x 200mm W
Side Mounted Rollout Soft-close  Side Mounted soft-closing slides  2 Adjustable baskets  40kg Load rating  Universal mounting (left or right)  Minimum internal cabinet depth 480mm  Minimum internal cabinet height 580mm  Basket height 80mm  Chrome plated
Part No. Min Internal Cabinet11.05.150 118mm
11.05.200 168mm
11.05.300 268mm
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
22
Door Mounted Storage Systems  Fully adjustable baskets  Minimum door width 500mm
Part No. Description Finish11.15.152 1520mm Mounting Storage Strip Grey
11.15.172 1720mm Mounting Storage Strip Grey
11.15.110 110 x 70 x 450mm Wire Basket CP
11.15.210 210 x 70 x 450mm Wire Basket CP
WIREWARE
Undersink Rollout  Side mounted ball bearing slides  Stand-off brackets, allow baskets to clear hinged doors  Suggested loading 12kg in total  Available in left or right mounting  Minimum internal cabinet width 250mm  Minimum internal cabinet depth 480mm  Minimum internal cabinet height 480mm  Chrome plated  Supplied with bonus brush holder
Part No. Description11.10.280 Left mounting
11.10.281 Right mounting
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
23
Door Mounted Storage Systems
Pull Out Pantry  Full extension  Soft close  90kg load rating  Fully adjustable baskets  6 Chrome plated wire baskets  Minimum internal cabinet depth 500mm  Supplied with installation instructions  Cabinet width = external cabinet width using 16mm side panel  Height adjustable: 1900mm - 2200mm  Basket size:
Height: 80mm Depth: 402mm
Part No. Cabinet Width11.00.300 300mm
11.00.400 400mm
WIREWARE
Veronar Wire Drawer  Side mounted ball bearing slides  Stand-off brackets, allow baskets to clear hinged doors  Removable baskets  Suggested load rating 25kg per drawer  Basket depth: 455mm  Basket height: 135mm  Minimum internal cabinet depth: 480mm  Chrome plated
Part No. Minimum Internal Cabinet Width
11.11.400 368mm
11.11.450 418mm
11.11.500 468mm
11.11.600 568mm
11.11.700 668mm
11.11.800 768mm
11.11.900 868mm
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
24
VIBO Fly Moon Corner Unit  Pull-out pivoting shelves  20kg load capacity per shelf  Simple installation with single support post  Height adjustable shelves  Melamine anti-slip shelves with chrome edge  Covered by 7yr replacement guarantee  Made in Italy
CORNER UNITS
Right hand unit shown
Description 450mm Door Part No.
600mm Door Part No.
Hand
2 Shelf 11.50.450 11.50.600 Left
2 Shelf 11.55.450 11.55.600 Right
4 Shelf 11.60.450 11.60.600 Left
4 Shelf 11.65.450 11.65.600 Right
600mm Unit Top View
1160
58040
489
70
600mm Unit Top View
Right hand unit shown
Right hand unit shown
600mm Unit Top View
1160
58040
489
70
844
135
450mm Unit Top View
860
489
70
40 430 450mm Unit Top View
450mm Unit Top View
860
489
70
40 430
199
719
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
25
2 Shelf Unit 4 Shelf Unit
2 Shelf Unit: 450mm Unit
 Height adjustable unit 655mm - 705mm  Suits door width 450mm - 599mm  860mm minimum internal cabinet length  489mm minimum internal cabinet width
600mm Unit  Height adjustable 655mm - 705mm  Suits door width 450mm - 599mm  1160mm minimum internal cabinet length  489mm minimum internal cabinet width
Melamine anti-slip shelves with chrome edge
4 Shelf Unit: 450mm Unit
 Height adjustable unit 1275mm - 1325mm  Suits door width 450mm - 599mm  860mm minimum internal cabinet length  489mm minimum internal cabinet width
600mm Unit  Height adjustable 1275mm - 1325mm  Suits door width 450mm - 599mm  1160mm minimum internal cabinet length  489mm minimum internal cabinet width
CORNER UNITS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
26
 Soft close slides  Universal - suits left or right mountinh  Minimum door size 450mm  4 Chrome wire baskets  Supplied with installation instructions & template  50kg Load rating  5-way door adjustments  Minimum internal cabinet height: 560mm  Minimum internal cabinet width: 855mm  Minimum internal cabinet depth: 485mm
Soft Close Corner Unit
Part No: 11.60.000
Chrome Lazy Susan  3/4 circle revolving corner unit  Suggested loading 50kg total  Height adjustable 670mm - 720mm  Diameter: 820mm  Chrome plated finish  Made in Europe
Part No: 11.20.820
CORNER UNITS
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
27
Plastic Lazy Susan ÂWhite plastic  720 and 820 diameter available  Complete with post and rotary tray  2 Shelves  50kg total load rating  Height: 680mm - 750mm  Depth: 507mm ÂWidth: 900mm x 900mm (820mm dia) ÂWidth: 800mm x 800mm (720mm dia)
CORNER UNITS
1/2 Chrome Lazy Susan  20kg load rating per tray  Unit comes complete with post, trays, fittings and installation instructions  Tray diameter: Ø 750mm  510mm pole + 25mm bracket  Cabinet Size:
Width: 900mm Depth: 500mm Door size minimum : 450mm
Part No: 11.22.150
Part No. Description11.22.720 720mm Ø
11.22.820 820mm Ø
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
28
Aluminium Tea Towel Rail
Part No: 11.30.200
Two arm aluminium tea towel rail
Chrome Plated
Part No: 11.30.300
Three arm aluminium tea towel rail
Single Rail
Part No: 11.31.315
315mm Single Rail
Part No: 11.31.365
365mm Single Rail
Length: 450mmWide: 95mm
Length: 450mmWide: 155mm
TEA TOWEL RAILS
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
29
Wine Glass Racks
Part No. Description Width11.17.105 Single Row Glass Rack 115mm
11.17.405 Four Row Glass Rack 435mm
 Veronar Wine Glass Rack  Length: 255mm  Height: 65mm  Chrome plated
WIREWARE
Part No: 11.60.500
Pullout Ironing Board  Collapsible ironing board lifts up automatically when opening the drawer.  Includes cotton ironing board cover.  Supplied with installation instructions.  Minimum internal cabinet depth 500mm.  Suits cabinets 380mm to 520mm internal cabinet width.  For a level work top height allow a maximum bench top thickness of 50mm.
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
30
LAUNDRY BASKETS
Part No: 13.40.600
Laundry Basket - Slide out ÂWhite PVC coated wire basket  Suits 500mm long metal drawer box  365mm wide  465mm deep  600mm high  Attaches to base & drawer front  Made in Australia
Laundry Basket - Swing out ÂWhite PVC coated wire basket  365mm wide  390mm deep  550/460mm high  To be installed with rubber stopper  Made in Australia
Part No. Description13.40.550 Swing out laundry basket
13.40.551 Rubber stopper
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
31
Matrix - Single Bowl, Single Drain  Overall sink size: 780mm long
480mm wide  Bowl size: 330mm long
390mm wide 180mm deep
 Material thickness: 0.9mm  Made from 304 grade stainless steel  90mm designer basket waste included
Matrix - 1½ Bowl, Single Drain
Part No. Description41.20.100 Left hand bowl
41.21.100 Right hand bowl
41.22.100 No tap hole
 Overall sink size: 980mm long 480mm wide
 Bowl size half: 200mm long 300mm wide 130mm deep
 Bowl size full: 325mm long 380mm wide 180mm deep
 Material thickness: 0.9mm  Made from 304 grade stainless steel  90mm designer basket waste included
Part No. Description41.20.150 Left hand bowl
41.21.150 Right hand bowl
Left hand bowl pictured
Left hand bowl pictured
For our full range of sinks and accessories, please refer to our Sinks & Tapware brochure
VERONAR SINKS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
32
Matrix - 1¾ Bowl, Single Drain  Overall sink size: 1080mm long
480mm wide  Bowl size ¾: 280mm long
280mm wide 150mm deep
 Bowl size full: 330mm long 380mm wide 180mm deep
 Material thickness: 0.9mm  Made from 304 grade stainless steel  90mm designer basket waste included
Part No. Description41.20.175 Left hand bowl
41.21.175 Right hand bowl
Matrix - Double Bowl, Single Drain  Overall sink size: 1180mm long
480mm wide  Bowl size (2): 330mm long
380mm wide 180mm deep
 Material thickness: 0.9mm  Made from 304 grade stainless steel  90mm designer basket waste included
Part No. Description41.20.210 Left hand bowl
41.21.210 Right hand bowl
Left hand bowl pictured
Left hand bowl pictured
For our full range of sinks and accessories, please refer to our Sinks & Tapware brochure
VERONAR SINKS
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
33
Matrix - 1¾ Bowl, Single Drain Matrix - Double Bowl and Drain  Overall sink size: 1380mm long
480mm wide  Bowl size (2): 330mm long
380mm wide 180mm deep
 Material thickness: 0.9mm  Made from 304 grade stainless steel  90mm designer basket waste included
Matrix - 45L Laundry Sink  Overall sink size: 605mm long
505mm wide  Bowl size: 515mm long
410mm wide 255mm deep
 Comes with 2 x 41mm Ø holes for tap and/or bypass  Comes with 1 cover cap to plug taphole  Material thickness: 0.9mm  Made from 304 grade stainless steel  90mm designer basket waste included
Part No: 41.20.220
Part No: 41.20.610
For our full range of sinks and accessories, please refer to our Sinks & Tapware brochure
VERONAR SINKS
KITCHEN ACCESSORIES
Southern Architectural Hardware Product Catalogue | Version KA.1.0
34
SINK MIXERS
Veronar Sink Mixer
Faucet Strommen Sink Mixer
 Veronar economy sink mixer  35mm Italian ceramic cartridge  Complies with WELS regulation  1 year guarantee
For our full range of sinks and accessories, please refer to our Sinks & Tapware brochure
Part No: 41.33.830
Part No: 41.33.521
 Loop Handle  35mm diam. ceramic valve.  5 year guarantee (1 year parts & labour + 4 years parts only)  Brass body construction  Built in Australia  Swivel spout with 213mm reach  Thick chrome plating  Complies with AS3718 ÂWELS 3 star 9lpm  Maximum supply pressure 700kpa  Maximum hot water temperature 70 degrees Celsius  Hole size 32 – 44mm
KITCHEN ACCESSORIES
p: 1800 061 787 | f: 03 6228 7077 | w: www.sah.net.au | e: [email protected]
35
SINK ACCESSORIES
Spare Plug & Waste
Laundry Bypass Kit  Suits laundry tub  Requires 41.6mm Ø tap hole in sink
Part No: 41.23.200
Part No. Description41.23.100 Long pipe for shallow bowls
41.23.150 Short pipe for deep bowls
Veronar Sink Accessories
Part No. Description41.23.212 Veronar Timber Chopping Board
41.23.300 Veronar Draining Rack
 Timber Board and Draining Rack suit all Veronar sinks
For our full range of sinks and accessories, please refer to our Sinks & Tapware brochure
Southern Architectural Hardware26 Station St
Moonah Tas 7009
Freecall: 1800 061 787Phone: +61 3 6228 0941 Fax: +61 3 6228 7077
Website: www.sah.net.auEmail: [email protected]
Kitchen Accessories
LED Cabinet Display Lighting
Sinks & Tapware
Harn Triomax
Harn Impaz
Drawer Systems
Joinery & Furniture Hardware
Abrasives & Adhesives
Rangehood Ducting
Washroom Fittings
Builders Hardware
Tools & PPE
Technical specification may vary without notice.