Click here to load reader
Upload
fixman
View
137
Download
5
Embed Size (px)
Citation preview
Installation Instructions
1. Download the required packages from the KinEmote web site: http://code.google.com/p/kinemote/
2. Install the software in this order: a). OpenNI Framework b). Sensor driver c). NITE Middleware using the following key: 0KOIk2JeIBYClPWVnMoRKn5cdY4=
3. Run the KinEmote Software.
4. Enter the IP address or Hostname of the computer running XBMC or Boxee. If you are running XBMC/Boxee on the same computer as the Kinect controller just use ‘localhost’
5. Choose XBMC, Boxee or Custom Keys
6. Click connect to start the KinEmote server.
Video OverlayKinEmote provides a dynamic video overlay that shows you what the Kinect camera is seeing. You can choose to enable/disable this in the Video drop down menu.
Show Visual Feed - Show video feedback windowAutostart Visual Feed - Shows the video whenever a tracking
session is active and hides it when a ses-sion drops.
To keep the video window on top of all other windows, right-click on a live video stream and choose ‘Always on top’
Navigating with KinEmote
To initiate a tracking session make a quick front-back motion toward the Kinect controller. The back motion will set the ‘zero-point’ of the Mid Plane.
Practice finding a comfortable spot for your mid plane as that is where you are going to be doing most of your movements.
The back plane lies about 8 inches behind the mid plane. Remember to stop a tracking session pull to the back plane and move your hand down.