Kimbers lighting products

Project

Catalog #

Type

DESCRIPTION

DATASHEET 05.30.2014Specifications and dimensions subject to change without notice

Canopy LED LuminaireStandard Flux

112 W / 12,600 Lumens

ENERGY DATA

347-480

120

12600

105

5000

80 min

>200,000

150,000

-40 to 50

The Canopy Star canopy LED luminaire from US LED is a perfect solution for parking structures, shopping area walkways, petrol stations and exterior canopies. The Canopy Star LED canopy is surface mounted for easy adaptation with a typical mounting height of 10 to 25 feet. Designed to illuminate area features with sharp, accurate color to increase security and visibility, the Canopy Star is cost effective to install and will replace conventional fluorescent, HPS and metal halide lighting.

POWER SUPPLY INFORMATION

FEATURES

Class 2 compliant design (low voltage, limited power)

L70 lifetime of >200,000 hours*

Luminaire is IP66 compliant

Protective coating added to resist corrosion

5-year warranty

l

l

l

l

l

SPECIFICATIONS

Dimensions (in)

Units/carton

Net weight

Environmental Rating

18.62 x 18.62 x 2.75

1

9 lbs

Wet

CERTIFICATIONl

l

Input Voltage (VAC)

System Level Power (W)

Delivered Lumens (Lm)

System Efficacy (Lm/W)

Color Temperature (K)

Color Rendering Index

L70 Calculated Life (Hrs)*

L85 Calculated Life (Hrs)*

Operating Temp (ºC)

120 - 277

112

12600

112.5

5000

80 min

>200,000

150,000

-40 to 50

SeriesDrive CurrentType

Example: PUC-UNV1-4100

UL 1598 approved

LM-79 available

FIXTURE ORDERING INFORMATIONExample: CNP3-50

CNP3 50

Series

CNP3

Color Temp (K)

50 5000K

PUC UNV1- (120-277 VAC) 4100

PUC UNV2 - (347/480 VAC) 4100

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

INSTALLATION GUIDECNPx-50

Page 1

US LED

Updated 09.26.13

#44-000017

The installation must only be performed by a licensed electrician.

To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.

Disconnect power before installing the product or servicing it.

Wait until fixture has cooled down before installing or servicing the fixture.

MIN. 90°C SUPPLY CONDUCTORS

WARNINGl

l

l

l

l

MODEL NUMBERSThis installation instructions covers the following products:

Power Supplies1. 50W Power Unit: PUC-UNV1-2100 or PUC-UNV2-21002. 75W Power Unit: PUC-UNV1-3000 or PUC-UNV2-30003. 96W Power Unit: PUC-UNV1-3570 or PUC-UNV2-35704. 192W Power Unit: PUC-UNV1-7140 or PUC-UNV2-7140

Luminaires1. CNP1-50 Series Luminaires2. CNP2-50 Series Luminaires

BOX CONTENTS

Mounting Plate Assembly

Wire Harness/Cover Assembly

CanopyStar Fixture

LED Driver withMounting Bracket

Tools Needed1. 4” Hole Saw2. #2 Phillips Screw Driver3. ¼” Hex Driver

Page 2

US LED

Updated 09.26.13

CNPx-50INSTALLATION GUIDE

#44-000017

1. Using4”holesaw,cutholeincanopywherefixtureistobemounted.Holelocationneedstobecenteredbe-tweencanopyribstoallowwireharness/coverassemblytofit.

2. Install mounting plate assembly by folding mounting tabs in, insert mounting plate into 4” hole and secure by tightening mounting tab screws using #2 Phillips screw driver. See Figures 1 and 2.

INSTALLATION INSTRUCTIONS

4” hole

Mounting tabs

FIG 1 FIG 2

Mounting tabscrews

FIG 3 FIG 4

3. Hang Canopy Fixture on mounting plate assembly by hooking hinge on mounting plate hook. Secure by sliding locking plate forward into slot and tightening #6-32 locknut. See Figures 3 and 4.

Locking plate

Locknut


Page 3

US LED

Updated 09.26.13

#44-000017

4. Route wires through center of mounting plate assembly. See Figure 5.

5. Take wire harness assembly and make power connections using approved electrical connector. See wire diagrams.


FIG 5 FIG 6

FIG 7 FIG 8

6. Pack excess wire in center of mounting plate assembly and mount cover using #10 sealing weather resistant screws supplied. See Figure 7.

7. Completeinstallationbyswingingfixtureintoplaceandsecuringwithmountingscrewsusing#2Phillipsdriver.See Figure 8.

Page 4

US LED

Updated 09.26.13


#44-000017

1. Turn off main power.

2. Secure driver box assembly to mounting bracket by tightening mounting screws using ¼” hex driver. See Figure 9.

3. Secure mounting bracket to any vertical wall using #10 sheet metal screws supplied. Insure location allows wire harness to reach low voltage side of power supply box. See Figure 10.

4. Make internal primary side (high voltage) power connections by connecting wires, Black to Load, White to Neu-tral and Green to Ground using approved electrical connector. See wire diagrams.

5. Make secondary (low voltage) connections by using approved electrical connector. See wire diagrams.

6. Secure driver box top using #8 sealing machine screws supplied.

7. Turn on power.

INSTALLATION INSTRUCTIONS - DRIVER BOX

FIG 9 FIG 10

Mounting screws


Page 5

US LED

Updated 09.26.13

#44-000017

WIRING DIAGRAMS

WITH TRANSFORMER

WITHOUT TRANSFORMER

FOR CNP1-50 LUMINAIRES

Page 6

US LED

Updated 09.26.13


#44-000017

WITHOUT TRANSFORMER, 2 DRIVERS

WIRING DIAGRAMS

WITH TRANSFORMER, 2 DRIVERS

FOR CNP2-50 LUMINAIRES

www.atgelectronics.com Toll free: 877-461-5333 E-mail: [email protected]

Product Description

eLucent™ WP Series LED Wall pack is designed for applications that require

lighting with a long life and low maintenance requirement.

With effective thermal management, corrosion-resistant, and die-cast

aluminum enclosure with an architectural dark brown finish, eLucent™ WP

Series LED Wall provides glare free, uniform illumination while providing a

safe and comfortable visual experience.

eLucent™ WP Series LED Wall pack adopts high luminous efficacy SMD

LEDs. They are available in 40 watts, 60 watts and 90watts.

With superior 60%-90% energy savings, compared to halogen lamp or a metal

halide lamp, eLucent™ WP90 achieves a superlative luminous flux of 8500 lm

and only consumes approximate 90 watts.

High lumen output, energy-efficient optical control and easy universal

installation features confirm the eLucent™ WP Series LED Wall as the

absolute choice for indoor and outdoor illumination.

eLucent™

WP Series LED Wall Pack

Performance Summary

Power consumption 40W 60W 90W

Lumens 4000 lm 6000 lm 8500 lm

PF/THD >0.9/<15% >0.9/<20% >0.9/<20%

CCT: 5700 K

Color Accuracy: CRI 85, R9>20

L70 lifetime: 130,000h

W WWP

W

WPFC40

W

WPFC60 & WPFC90

W

WP0040

W

WP0060 & WP0090

Family Model

WPFC40 WP0040

WPFC60 WP0060

WPFC90 WP0090

WPFC Series WP00 Series WPDS SeriesDark Sky Compliant Dark Sky Compliant


Ordering Information

Typical Order Example: WPFC60HU570000

Product Specifications

CONSTRUCTION & MATERIALS

Type WPFC40 WPFC60 WPFC90 WP0040 WP0060 WP0090

Dimension 362*293*230 mm

(14.25*11.54*9.06")

465*350*232 mm

(18.31*13.78*9.13")

465*350*232 mm

(18.31*13.78*9.13")

363*230*195 mm

(14.29*9.06*7.68")

465*230*244 mm

(18.31*9.06*9.61")

465*230*244 mm

(18.31*9.06*9.61")

Housing Die-cast aluminum

Lens Type Glass

ENVIRONMENTAL SYSTEM

Work Environment Indoor and outdoor use

Operating Temperature -20℃~60℃(-4~140℉)

OPTICAL SYSTEM

Type WPFC40/WP0040 WPFC60/WP0060 WPFC90/WP0090

Luminous Flux 4000 lm 6000 lm 8500 lm

Luminous Efficacy Typ. 100 lm/W

Color Temperature 5700 K

CRI 85

Lumen maintenance at 6000h 99%

ELECTRICAL SYSTEM

Type WPFC40/WP0040 WPFC60/WP0060 WPFC90/WP0090

Input Voltage 100~277VAC/0.31A 100~277VAC/0.48A 100~277VAC, 0.75A

Off State Power 0W 0W 0W

Power Consumption 40W 60W 90W

THD <15% <20% <20%

Power Factor >0.9

REGULATORY & VOLUNTARY QUALIFICATIONS

ETL & cETL Listed (ETL No.: 4003329)

DLC, LM79

CE, RoHS

SERIES HOUSING WATT VOLTAGE CCT CONTROL OPTIONS

WP=Wall Pack FC=Full Cutoff

40=40W

60=60W

90=90W

HU=100-277V 57=5700K

00=non-dimming 00=Default

eLucent™

WP Series LED Wall Pack

SIDE BOTTOM

BACK TOP

Project

Catalog #

Type

DESCRIPTION

Specifications and dimensions subject to change without notice. DATASHEET 04.23.2014

| | | | |

ORDERING INFORMATIONExample: TL-WMB301-01-BZ

TL WMB301 01

Series Color

TL WMB301 01

EconoPakWall Mount Luminaire

ENERGY DATA

Input Voltage (V AC)




Correlated Color Temp (K)

Minimum CRI

LED L70 Lifetime (Hrs)*

Operating Temp (ºC)

120 - 277

30

2500

82

5000

70

142,000

-20 to 40

SPECIFICATIONS

Dimensions (in)

Units/carton

Net weight


7.75 x 6.625 x 4.25

1

5.4 lbs

Wet

FEATURESPowered by a constant current power supply to achieve maximum efficiency

(see separate data sheet)

IP65 ingress protection

Designed to meet Class 2 safety requirements

5-year warranty

l

l

l

l

EconoPak is a multi-purpose LED luminaire designed for indoor and outdoor area lighting applica-

tions. Delivering maximum lumens for 142,000 hours* while using only 30 Watts of power, its compact

design with enclosed power supply make it ideal for such applications as flood lighting, sign lighting,

landscape and general area lighting. The EconoPak can be mounted to a wall, ceiling or conduit,

making it one of the most versatile LED luminaires in the market.

CERTIFICATION

UL Listed USA+Canada File # E352127

LM-79 Test Report

l

l

† US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

BZ

WH

Bronze

White

Project

Catalog #

Type

Specifications and dimensions subject to change without notice. DATASHEET 05.06.2014

DESCRIPTIONThe QubeLot2 evenly illuminates walkways, streets and parking areas. The classic design of this lumi-

naire seamlessly blends into all forms of architecture. Highly efficient and long-lasting, the QubeLot2

is an ideal replacement for HID. Exceptional high-brightness LEDs result in higher light levels and

significant energy savings. High-efficiency 5200K LEDs mounted to a metal-core circuit board and

aluminum heat sink, ensure optimal thermal management and long life (L85 124,000 hrs).

FEATURES AND SPECIFICATIONSType 5 medium light distribution and Type 2 medium distribution pattern available

Comes fully equipped with power supply

Bi-level light option available for dimmed-down lower power operation

EPA rating of fixture is 0.7/sq ft and mount is 0.13/sq ft

5-year warranty

ENERGY DATAInput Voltage (V AC)





L70 Calculated Life (hrs)*


Minimum CRI

Operating Temperature (°C)

120 - 480

136

12,300

90

5200K

289,000

124,000

65

-40 to 45

Parking Lot Luminaire4-Qube

QubeLot2

SPECIFICATIONSDimensions (in)

Units/carton

Net Weight


25.2 x 12.7 x 3.3

1

16 lbs

Wet

ORDERING INFORMATION

QL2 1 52

Series Light DistPattern

# ofQubes

Color Temp

QL2 1 52 5200K

Example: QL2-1-UNVL-4-5M-52-0

Input Voltage

5M 5 Medium

2M* 2 Medium

UNVL 120-277

UNVH* 277-480

Options

0 0-10V Dimming

1 Photocell Socket

2 **DynaDimmer

3 **Photocell Socket & DynaDimmer

Variant

3

4

* Not DesignLights Conortium qualified** Note: Options 2 and 3 not available with UNVH Input Voltage

ENERGY DATAInput Voltage (V AC)







Minimum CRI

Operating Temperature (°C)

120 - 480

104

9300

89

5200K

289,000

124,000

65

-40 to 45

SPECIFICATIONSDimensions (in)

Units/carton

Net Weight


25.2 x 12.7 x 3.3

1

14.5 lbs

Wet

l

l

l

l

l

3-QUBE 4-QUBE

CERTIFICATIONUL Listed USA and Canada File# E338791

DesignLights Consortium qualified

l

l



Horizontal mounting only

Specifications and dimensions subject to change without notice.

US LED | 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com

UPDATED 02.06.2013

#44-000016

1. Turn off power to light pole at circuit breaker.

2. Drillnecessaryholesintopoleforfixturemounting(FIG1).

3. Remove pole cap and lower nut plate inside of pole until threaded holes align with proper moutning holes.

4. Assemblethreadedrodsintonutplateandslideongasketsandspacerblock(FIG2).

5. Affixbackhousingtopoleusingwasherplate,lockwashersandnuts(FIG3).

6. Hanglightengineassemblyontobackhousing(FIG4).

7. Make connections as required by the wiring diagram.

8. Rotate light engine assembly to closed position and secure using captive screws.

The installation must only be performed by a licensed electrician.

To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.

Disconnect power before installing the product or servicing it.

Wait until fixture has cooled down before installing or servicing the fixture.


FIG 1

QubeLot2

FIG 2

FIG 3 FIG 4



UPDATED 02.06.2013

#44-000016


QubeLot2

WIRING DIAGRAMS

LEGEND

*VERIFY CORRECT POWER SUPPLY

FACTORY INSTALLED

FIELD INSTALL

. . .

OPTION 2 - PHOTOCELL

OPTION 1



UPDATED 02.06.2013

#44-000016

OPTION 3 - DYNADIMMER


QubeLot2

WIRING DIAGRAMS

LEGEND

*VERIFY CORRECT POWER SUPPLY

FACTORY INSTALLED

FIELD INSTALL

. . .

OPTION 4 - PHOTOCELL AND DYNADIMMER


S

iBright™

LED Vapor Proof Fixture

Model

VP4FT4K-00

VP4FT5K-00

VP5FT4K-00

VP5FT5K-00

Product Description

iBright™ LED Vapor Proof Fixture supports for pendant, ceiling and wall

mounting solutions which is more flexible and easy-to-install.

It has imaginative appearance and impressive uniformity and available in 4ft

and 5ft. The 5ft fixture can reach 5500 lm with only 60W power consumption

which is equal to 2 to 3 pcs LED tubes.

iBright™ LED Vapor Proof Fixture is widely used for ambient lighting

application like parking lots, gas stations, tunnels, warehouses and more.

Performance Summary

Length: 4ft, 5ft

Power consumption: 50W, 60W

Luminous efficacy: Typ. 85+ lm/W

Lumens: 4300 lm, 5500 lm

CCT: 4000 K, 5000 K

CRI: >80

PF>0.92/ THD<20%


Ordering Information

Typical Order Example: VP4FT5K-00

Product Specifications

CONSTRUCTION & MATERIALS

Type 4 FT 5 FT

Dimension 1265*129*88 mm (49.80*5.08*3.46 inch) 1563*129*88 mm (61.54*5.08*3.46 inch)

Housing PC

Lens Type Frosted

ENVIRONMENTAL SYSTEM

Work Environment Indoor use

Operating Temperature -30℃~40℃

OPTICAL SYSTEM

Type 4 FT 5 FT

Luminous Flux 4300 lm 5500 lm

Luminous Efficacy Typ. 85+ lm/W

Color Temperature 4000 K, 5000 K

CRI 80

Lumen maintenance at 6000h 98.28%

ELECTRICAL SYSTEM

Type 4 FT 5 FT

Power Consumption 50 W 60 W

Input Voltage 100-277 VAC 50/60 HZ

Power Factor >0.92

THD <20%

REGULATORY & VOLUNTARY QUALIFICATIONS

DLC pending

ETL/cETL pending

UL/cUL, and CE certified external driver

SERIES Length CCT OPTIONS

VP=Vapor Proof 4FT

5FT

4K=4000K

5K=5000K

00=Standard

SN=Sensor

EM=Emergency

DM=Dimming

-

70W 2x4 LED Panel

Features: Unique design model with ultra-thickness <11mm. Driver protected by junction box

fixed on back of panel for more safety and stability. Four corner protected by

electroplating PC cover. Output lead wire screwed by connecter allowing easy

wiring and installation. Stable driver with UL and DLC approved.

Applications: Used for indoor commercial and home lighting such as hospital, offices, residential restaurants, retail stores, art galleries,

museums, and hotels.

SPECIFICATIONS: WATTAGE: 70W MODEL #: LP1206-70W-40KD

LP1206-70W-50KD DLC #: LP1206-04 UL & CUL: E466848 CERTIFICATIONS: UL, CuL, FCC, CE, RoHS, DLC

LUMENS OUTPUT (IES): 6000LM EFFICACY (IES): 100.3 LM/W VOLTAGE: AC100-277V, AC347-480V (optional) POWER FACTOR: 0.95 KELVIN (CCT): 4000/5000 BEAM ANGLE (DEGREE): 120°, 85°/135° Degrees CRI: 82

LIFE SPAN (HOURS): 50,000 Hours

DIMMING COMPATIBLE: Yes, O-10V Dimming LENGTH OF WARRANTY (YEARS): 5 Years Standard FIXTURE MATERIAL: Aluminum

DIMENSIONS (L X W X H) 600x1200x11mm (23.80x47.80x0.43 in) WEIGHT: 9.9 kg (21.8 lbs) MOUNTING OPTIONS: Surface Mount, Suspended/Hanging WORKING ENVIRONMENT: -25°C to 40°C (-20°F to 120°F) SUGGESTED REPLACEMENT FOR: 200W PERCENTAGE OF WATTAGE SAVED: 75%

Built-in

Suspended/Hanging

Surface Mount

Contact Brite Energy Solutions - Tom Knoblock 1-844-533-2897 Toll Free

http://www.ledonedistribution.com/

mailto:[email protected]

ILTCaseLightLED Refrigerated Case Lighting System

ILTINNOVATIONS

I n te rnat i ona lL ight Te chno log i e s , Peabody, MA (USA ) • 4 0 Ye a r s o f L i g h t i n g E x p e r i e n c e – W e K n o w L i g h t !

10 Technology Drive, Peabody, MA 01960978-818-6180 978-818-6181 fax

intl-lighttech.com

ISO 9001:2000

I n t e r n a t i o n a l L i g h t T E C H N O L O G I E SI n t e r n a t i o n a l L i g h t T E C H N O L O G I E S

2.18"

1.17

"1.17

"

1.65"

Part Number Description Color Temp. (K) Lumens Energy (Watts) Life (Hours) CRI (Typical)

ILT60-BAO-W50CE CaseLight, 60”, Brite Anodize, Center unit 5000 1100 20 50000 87ILT60-BAO-W50LE CaseLight, 60”, Brite Anodize, Left unit 5000 550 10 50000 87ILT60-BAO-W50RE CaseLight, 60”, Brite Anodize, Right unit 5000 550 10 50000 87




ILT-CEN-60-24 Power Supply, 100-277VAC in, 24VDC out, powers up to 3 – 60”Center units - - -

caselight brochure for IR:Layout 1 6/23/11 10:57 AM Page 1

Easily Replace Existing Cooler/Freezer Display Case Fluorescent LightsEasy Mounting Using TEK Screws or VHB Foam Tape When Space is Limited No Need to Empty Shelves!Lower Energy Bills and No Burned Out Bulbs!Long Fixture Life – YEARS vs. Weeks/MonthsLow Maintenance – 5 Year Warranty on CaseLight Modules & Power SuppliesDLC Listed – Eligible for ALL Rebates CaseLight Modules Made in the USA

Improving on the success of ILT's previous CaseLight modules for refrigerated/freezer display cases, ILT's new, more efficient CaseLight module has even lower power consumption and higher overall optical performance for your reach-in coolers and freezers. For Retrofit or New cases, ILT CaseLight can be installed easily and cost-effectively.

LED-based CaseLight modules provide all of the advantages of LED-based lighting including much longer life (greater than 50,000 hours), much lower energy consumption and much better lighting characteristics – brighter light focused on the merchandise. Plus all of ILT's CaseLight modules are DLC listed qualifying for maximum utility rebates.

Make Your Prepared Foods POP With CaseLight™ LED Modules!

40-Plus Years of ILT Lighting Experience Goes Into Every CaseLight!

CaseLight is DLC Listed!


• EasilyReplaceExistingCooler/FreezerDisplayCase FluorescentLights • EasyMountingUsingTEKScrewsorVHBFoamTape WhenSpaceisLimited •NoNeedtoEmptyShelves!

• LowerEnergyBillsandNoBurnedOutBulbs!

• LongFixtureLife–YEARSvs.Weeks/Months • LowMaintenance–5YearWarranty onCaseLightModules&PowerSupplies

• DLCListed–EligibleforALLRebates

• CaseLightModulesMadeintheUSA




ILTINNOVATIONS



intl-lighttech.com

ISO 9001:2000


2.18"

1.17

"1.17

"

1.65"













CaseLight is DLC Listed!ILTCaseLightLED Refrigerated Case Lighting System

ILTINNOVATIONS



intl-lighttech.com

ISO 9001:2000


2.18"

1.17

"1.17

"

1.65"















ILTINNOVATIONS



intl-lighttech.com

ISO 9001:2000


2.18"

1.17

"1.17

"

1.65"












40-Plus Years of ILT Lighting ExperienceGoes Into Every CaseLight!


45-PlusYearsofILTLightingExperienceGoesIntoEveryCaseLight!


ILTINNOVATIONS



intl-lighttech.com

ISO 9001:2000


2.18"

1.17

"1.17

"

1.65"














45


intl-lighttech.com

ISO 9001:2008













intl-lighttech.com

ISO 9001:2008













intl-lighttech.com

ISO 9001:2008













ILTINNOVATIONS

I n te rnat i ona lL ight Te chno log i e s , Peabody, MA (USA) • 4 0 Ye a r s o f L i g h t i n g E x p e r i e n c e – W e K n o w L i g h t !


intl-lighttech.com

ISO 9001:2000


2.18"

1.17

"1.17

"

1.65"















intl-lighttech.com

ISO 9001:2008ISO/IEC 17025:2005


1.17

"

1.65"

C US

Model # Description Color Temp. Lumens Watts CRI Recommended (K) (W) Applications

ILT48-BAO-W35LH Horizontal CaseLight, 48”, 3500 1135 26.6 90 Fresh meatsBrite Anodize, Left configuration.

ILT48-BAO-W35RH Horizontal CaseLight, 48”, 3500 1135 26.6 90 Fresh meatsBrite Anodize, Right configuration.

ILT48-BAO-W40LH Horizontal CaseLight, 48”, 4000 1135 26.6 90 Produce, dairyBrite Anodize, Left configuration.

ILT48-BAO-W40RH Horizontal CaseLight, 48”, 4000 1135 26.6 90 Produce, dairyBrite Anodize, Right configuration.

ILT48-BAO-W50LH Horizontal CaseLight, 48”, 5000 1200 26.6 87 Frozen foodBrite Anodize, Left configuration.

ILT48-BAO-W50RH Horizontal CaseLight, 48”, 5000 1200 26.6 87 Frozen foodBrite Anodize, Right configuration.







ILT-CEN-60-24 60 Watt, UL Class 2 Power Supply 100-277VAC input, 24VDC output Powers up to 2 – 70” unitsILT-LPF-40-24 40 Watt, UL Class 2 Power Supply 100-277VAC input, 24VDC output Powers up to 2 – 48” unitsILT-D24V100UNVA 100W, UL Class 2 Power Supply 120-277VAC input, 24VDC output Powers up to 3 – 70” units or 4 – 48” units

final horizontal CaseLight brochure_Layout 1 9/18/12 4:06 PM Page 2


intl-lighttech.com

ISO 9001:2008ISO/IEC 17025:2005


1.17

"

1.65"

C US

Model # Description Color Temp. Lumens Watts CRI Recommended (K) (W) Applications













ILT-CEN-60-24 60 Watt, UL Class 2 Power Supply 100-277VAC input, 24VDC output Powers up to 2 – 70” unitsILT-LPF-40-24 40 Watt, UL Class 2 Power Supply 100-277VAC input, 24VDC output Powers up to 2 – 48” unitsILT-D24V100UNVA 100W, UL Class 2 Power Supply 120-277VAC input, 24VDC output Powers up to 3 – 70” units or 4 – 48” units

final horizontal CaseLight brochure_Layout 1 9/18/12 4:06 PM Page 2

PowerSupplies

ILT-LPF-40-2440 Watt, UL Class 2, 100-277VAC input, 24VDC output

ILT-CEN-60-2460 Watt, UL Class 2, 100-277VAC input, 24VDC output

ILT-D24V100UNVA100W, UL Class 2, 120-277VAC input, 24VDC output

5000 1200 15 50000 855000 600 7.5 50000 855000 600 7.5 50000 85

4000 1160 15 50000 854000 580 7.5 50000 854000 580 7.5 50000 85

3500 1160 15 50000 853500 580 7.5 50000 853500 580 7.5 50000 85

5000 1600 20 50000 855000 800 10 50000 855000 800 10 50000 85

4000 1547 20 50000 854000 773 10 50000 854000 773 10 50000 85

3500 1547 20 50000 853500 773 10 50000 853500 773 10 50000 85

5000 2000 25 50000 855000 1000 12.5 50000 855000 1000 12.5 50000 85

4000 1940 25 50000 854000 970 12.5 50000 854000 970 12.5 50000 85

3500 1940 25 50000 853500 970 12.5 50000 853500 970 12.5 50000 85

* ILT48-BA0-W50CE* ILT48-BA0-W50LE* ILT48-BA0-W50RE



* Not DLC Listed

Installation Instructions

Note – Wiring and mounting instructions are applicable for both center and end units

Model Numbers – Example ILT60-BAO-W50CEILTAA-

(AA=Length-inches)BAO-

(Brite Anodize finish)

WBB(BB=color temp)

CE(C=Configuration; E=External Power

Supply)ILT48 (48”) “ 35 (3500K) CE (Center, External Power Supply)ILT60 (60”) “ 40 (4000K) LE (Left, External Power Supply)ILT70 (70”) “ 50 (5000K) RE (Right, External Power Supply)

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY, OBSERVE THE FOLLOWING:

A. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

B. Before installing, servicing or cleaning unit, switch power off at the service panel and follow appropriate lock out / tag out safety procedures.

FOR YOUR SAFETY:Read and observe all CAUTIONS and WARNINGS shown throughout these instructions. While performing installations described, gloves, safety glasses or goggles should be worn.

PREPARE ELECTRICAL WIRING:A. Electrical Requirements – This fixture must be powered by a Meanwell, 60W, 24VDC power

supply, model CEN-60-24, ILT part number ILT-CEN-60-24, connected to a properly grounded branch circuit, protected by a circuit breaker.

B. Grounding Instructions – This power supply must be connected to a grounded metal, permanent wiring system.

C. Strain Relief Requirements – This fixture is equipped with a cord but no attachment plug. Therefore, the installer must include a strain relief sized properly for the cable and opening in the junction box it is attaching to. An example is the Heyco Products strain relief, part number 1150, or equivalent if routing wire into a junction box or through an access hole.

CI-101 Rev. A Page 1 4/25/2012

International Light Technolgies 978-818-6180 Brite Energy Solutions 308-367-4542

TOOLS NEEDED:- Wire connectors- Wire cutters- Gloves- Tape measure- Wire stripper- Safety glasses- Center punch- Power drill- Screwdriver- #6 x 1 1/2” self-tapping screws

Prepare for Mounting Light Fixture to Mullion – using #6 x 1 1/2” self-tapping screws

CAUTION – Turn off power to the mullion lighting system before removing any covers.- Measure the total length of the mullion to determine which model/length unit to install. Center

the fixture vertically on the mullion. Mark the top and bottom of the fixture.- Measure the total width of the mullion and mark a vertical line, ½ the total width near the top,

6” from the top, 6” from the bottom.- Mark a horizontal line 6” down from the top of the fixture. Mark a horizontal line 6” from the

bottom of the fixture.

CAUTION – Prior to installing screws, make sure that there are no existing components inside the mullion in the areas to be drilled. Do not drill through “DO NOT DRILL” label.

- Use power drill and screw bit and install 4, #6 x 1 1/2” self-tapping screws through the center indent of the fixture. Install 2-3 screws, one 6” from top, one 6” from bottom and one in the center if necessary.

NOTE – Starting the screws into the fixture with the fixture outside the cooler may make it easier for installation. Screws can then be fully inserted into mullion while holding fixture in place.

Alternate Mounting MethodHigh quality VHB-type foam tape may also be used to mount the fixtures.

− Thoroughly clean the back of the fixture and the mullion surface.− Using 1/2”-3/4” wide VHB tape, apply tap to back surface of fixture to within 3” of top and

bottom of fixture.

CI-101 Rev. A Page 2 4/25/2012

10 Technology Dr., Peabody, MA 01960 978-818-6180 978-818-6181 fax

− Dry fit fixture to mullion. Once fit is confirmed, peel release paper, align fixture and press against mullion for entire length of fixture.

Connect Wiring from FixtureCAUTION – Ensure that all connection points are sealed for damp location using the appropriate method per the NEC or local electrical code.

- Cut the fixture cable to the appropriate length to terminate to DC power at the Power Supply.- Where necessary, insert the proper strain relief on the cable and secure to hole in mullion or

junction box.- Strip the cable jacket and then strip the individual two wires. Attach the Black wire to the

Black wire of the power supply using twist-on wire connector. Attach the Red wire to the Red wire of the power supply using twist-on wire connector.

Connect Wiring to Power SupplyCAUTION – Wiring to high voltage side of power supply to be accomplished by certified electrician in accordance with NEC or local electrical code.

Trouble-shooting and Maintenance InstructionsCAUTION – Turn off power to the mullion lighting system before removing any covers.

The following items can be replaced in the field:- 60W Power Supplies- LED flex strips (access to end of unit required)

TROUBLE-SHOOTING- If an entire strip of LEDs are not lighted (one of the two strips for a center unit or the one strip

of an end unit), either there is a wiring problem to that strip or the LED driver is defective.- Check wiring connections to the unit at the driver. If the connections look OK, proceed to

“Replacement of LED Driver”.- If both LED strips are not lighted on a center unit or the single strip isn’t lighted on an end-unit,

it is possible that power to the unit has been interrupted. Confirm that the cable to the unit is wired properly and securely to the DC power source.

Replacement of LED Flex Strip- Remove the 2, #4 screws securing the end-cap where the cable exits the unit. - Slide out the lens on the side of the defective LED flex strip.- Cut the two wires from the defective LED flex strip about 6” from the end of the strip.

CI-101 Rev. A Page 3 4/25/2012


- Remove the defective LED flex strip by peeling away from the housing.- Install the new LED flex strip by peeling the release tape and sticking to the housing. Start at

wired end positioning start of strip about 1” from end of housing. Continue down the full strip, pressing in between components to insure a good bond.

- Connect Red and Black wires to the wires previously cut. Attach using twist on wire nuts.- Push the wire nuts inside extrusion.- Slide in lens which was previously removed. Re-attach end-caps with 2 #4-40 screws

previously removed.

Fixture Cleaning Instructions- The lens and aluminum housing should be cleaned periodically with a mild liquid dish

detergent.- Do not use chemical cleaners on the lens.- Keep the outside clean. Wipe with a clean cloth lightly dampened with mild liquid dish

detergent. Dry with a clean, soft cloth. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and damage the finish.

Door Configurations The ILT-CEN-60-24, 60W, 24VDC power supply can power up to 3 Center units. Here are three typical door configurations and the number of power supplies required for each.

# of Doors # of Center Units

# of End Units # of Power Supplies

Notes

3 2 2 14 3 2 2 2 Centers-1 End; 1 Center-1 End5 4 2 2 2 Centers-1 End per P.S.

6 5 2 32 Centers-1 End per P.S. It is possible to wire 2 Centers and 2 Ends on 1 P.S.

CI-101 Rev. A Page 4 4/25/2012


MAX13155

4” LED COMMERCIAL RECESSEDDOWNLIGHT RETROFITS

MaxLite®: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: [email protected]

Luminaire Ordering Information:

PROJECT NAME

CATALOG NUMBER

NOTES

FIXTURE TYPE

COMPLIANT RoHS

Revised: 11-19-14

Watts Order Number Model Number Fluorescent

Equivalent Lumens Lamp Life (Hrs.) CCT

14 73567 RR41530W 1 X 26W PL 785 50,000 3000

14 73568 RR41540W 1 X 26W PL 875 50,000 4000

26 72605 RR42630W 2 X 18W PL 1340 50,000 3000

26 72606 RR42640W 2 X 18W PL 1515 50,000 4000

FEATURES:• Universal voltage (120-277)• Mounts into existing recessed frame• Supplied with optional retaining clips if existing frame does not have adequate frictionsprings to secure reflector

• cETL listed for damp location use• CRI: > 85• PF: >.9• A wide variety of CCTs available: 3000K and 4000K come standard2700K and 5000K (contact MaxLite for quotations)

• Five year limited warranty• Dimmable to 5% (120v only)

CONSTRUCTION:• Supplied with a heavy gauge anodized aluminumreflector in a haze finish

• External driver for easy retrofit and maintenance

• Power supply features integral thermal protection

The commercial-grade LED Recessed DownlightRetrofit is supplied with a quick connect-caseand conduit to make an easy connection to anexisting recessed fixture frame junction box.

2014CONSULTING – SPECIFYING

®

FINALIST

Scan the QR code with asmartphone to view the installationvideo or visit the following link:http://bit.ly/ledcrdr

Accessories

Order Number Model Number Description

74086 RR4-BNRING 4” BRUSHED NICKEL TRIM RING

OVERALLDIMENSIONS

EXTERNAL DRIVER

PRODUCT FEATURES

RETAINING CLIPS

Retaining clips are supplied for situations where the existing recessed frame does not have pre-installed clips to secure the reflector.

16.65”

4.9”

44.483.75”

8.79”

3.24”

6.1”

1.16”

STANDARD TRIM RINGREFLECTOR

4.7”

3.75”

.27”

6.15”

4.55”


COMPATIBLE DIMMERS:

MAKE DIMMER MODEL

Lutron CTCL-153PD*

Lutron DVCL-153PL*

Lutron CTELV-303P

Lutron DVELV-303P

Lutron LGCL-153PL*

Leviton IPI10

* Dimming control should be adjusted to 5% minimum light outputlevel in order to avoid flickering. Please consult dimming controlinstruction manual for specific procedure.


COMPLIANT RoHS

Revised: 11-19-14


®

FINALIST


0

90

180

30

150

60

120

300

600

900

RR42630WANGLE

05

1015202530354045505560657075808590

MEAN CP870876911991

109610898244072581781176322941000

LUMENS

86

286

477

281

139

57

10

2

0

ZONE0-300-400-600-90

40-9060-90

90-1800-180

LUMENS849

113013261338207120

1338

% LUMINAIRE63.4884.5199.13

100.0015.490.870.00

100.00

ANGLE4555657585

MEAN CD/SQ M31161136022623606

0

INTENSITY (CANDLEPOWER) SUMMARY ZONAL LUMENS AND PERCENTAGES

LUMINANCE SUMMARY CD./SQ.M.

0

90

180

30

150

60

120

350

700

1050

RR42640WANGLE

05

1015202530354045505560657075808590

MEAN CP10081015105411551295129096642626218011864231042000

LUMENS

100

334

564

306

141

59

11

2

0

ZONE0-300-400-600-90

40-9060-90

90-1800-180

LUMENS998

130415031516212130

1516

% LUMINAIRE65.8086.0199.15100.0013.990.850.00

100.00

ANGLE45556575

MEAN CD/SQ M31592138422889750

INTENSITY (CANDLEPOWER) SUMMARY ZONAL LUMENS AND PERCENTAGES

LUMINANCE SUMMARY CD./SQ.M.


COMPLIANT RoHS

Revised: 11-19-14


®

FINALIST

Documents

Kimbers lighting products