Upload
akshay-kadbe
View
540
Download
46
Tags:
Embed Size (px)
DESCRIPTION
Kiln Erection presentation
Citation preview
Kiln erection
1. Erection and alignment of kiln bases and gearbox supports
2. Preassembly of kiln shell heavy sections (tyre sections)
3. Preparation of Kiln bearings, scraping if necessary
4. Erection and alignment of bearings, rollers and thrust device
5. Erection of kiln drive
6. Preassembly of kiln light sections
7. Erection of kiln heavy and light sections, alignment and welding
8. Erection of kiln seals, heat shields, fans, etc.
Erection and alignment of kiln bases and gearbox supports Alignment of kiln bases
Gear box supports and self aligning yoke
Preassembly of kiln heavy sections
Mark up and weld on one side of retainers
Insert tyre, mark up and weld next side Align tyre to shell and weld on axial retainers All welding are to be inspected by UT and MT
Mounting of tangential suspension
Preparation of kiln bearings
Check with blue marking, and scrape if nesseary
Erection and alignment of bearings, rollers and thrust device Erection and alignment of bearings and rollers
Erection and alignment of thrust device
Erection of kiln drive
Preassembly of kiln light sections and erection of kiln
Kiln seals, heat shields, fans, etc.
Animation of the Rotax- 2 kiln