Khadi & Village Industries Commission

(KVIC)

Request for Proposal (RfP) for Empanelment of Looms, Pre-Weaving machineries manufacturers and

suppliers.

{Guidelines regarding application for Empanelment of manufacturers with KVIC for

supply of Khadi implements (different looms and pre-weaving machineries) to the Khadi programme implementing institutions}

February 2018

NO: KPM/Looms/RfP/2017-18

Page 2 of 22

Schedule for invitation to RfP

1. Name of the issuing office Director –Khadi

Khadi & Village Industries Commission,

Gramodaya, 3 Irla Road,

Vile Parle (West)

Mumbai-400 056.

Phone/Fax : 022-26715860

Email:- directorkhadi @gmail.com

2. Submission of RFP Document

and Contact person

Shri J.K. Gupta

Director – Khadi

Khadi & Village Industries Commission,

Gramodaya, 3 Irla Road,

Vile Parle (West)

Mumbai-400 056.

Phone/Fax : 022-26715860

Email:- directorkhadi @gmail.com

3. Date of Bid Specification

document to be available on the

website www.kvic.org.in

26-02-2018

4. Date of Pre-Bid meeting

05-03-2018

15.00 Hrs.

5. Last date and time for

submission of RfP Documents

19-03-2018

15.00 Hrs.

6. Date and time of opening of

Technical Bid

20-03- 2018

11.00 Hrs.

7. Date and time of opening of

Financial Bid

22-03- 2018

11.00 Hrs.

8. Place of opening of Bid

Document

Debharbhai Hall,

Khadi & Village Industries Commission,

Gramodaya, 3 Irla Road,

Vile Parle (West)

Mumbai-400 056.

Page 3 of 22

TABLE OF CONTENTS

1. Background ..................................................................................................................................... 4

2. Eligibility of the applicants ........................................................................................................... 5

3. Qualification Criteria ..................................................................................................................... 5

4. Scope of Work ................................................................................................................................. 7

5. Technical Specification: ................................................................................................................ 7

6. Terms and Conditions: .................................................................................................................. 7

7. Selection Process ............................................................................................................................ 8

8. Earnest Money Deposit ................................................................................................................. 9

9. Performance Bank Guarantee .................................................................................................... 10

10. Conflict of interest: ................................................................................................................... 11

11. Force Majeure: ............................................................................................................................ 10

12. Arbitration: ................................................................................................................................. 10

13. Jurisdiction: ................................................................................................................................ 11

14. Integrity Pact .............................................................................................................................. 11

15. Pre-bid Meeting .......................................................................................................................... 12

16. Submission of application ......................................................................................................... 12

17. Acknowledgement by Applicant ............................................................................................... 13

18. Disclaimer ................................................................................................................................... 14

FORM-I: LETTER OF RESPONSE ................................................................................................ 14

FORM–II: STATEMENT OF LEGAL CAPACITY ........................................................................ 16

FORM-III: Technical Bid ................................................................................................................ 17

FORM-IV: Financial Bid ................................................................................................................. 20

FORM - V: STATEMENT AS REGARDS TO ANY INDICTMENT BY ANY REGULATORY

AUTHORITIES ................................................................................................................................. 21

Page 4 of 22

1. Background

The Khadi and Village Industries Commission (KVIC) is a

statutory body established in 1957 by an Act of Parliament. It

functions under the administrative control of the Ministry of

Micro, Small and Medium Enterprises, Government of India.

Broad objectives of KVIC are as follows:

a) The social objective of providing employment

b) The economic objective of producing saleable articles, and

c) The wider objective of creating self reliance amongst the

people and building up of a strong rural community spirit

KVIC, through its various schemes is supporting Khadi and

Village Industries Institutions and entrepreneurs in the

production of Khadi and various products of village industries.

In view of the large employment generation potential of the KVI

sector, Government of India attaches significant support to this

sector.

In an effort to further strengthen the Khadi sector

particularly the employment generation potential, KVIC has

started implementation of Khadi Reform and Development

Programme (KRDP) with the support of Asian Development

Bank (ADB).

Further KVIC is implementing SFRUTI and SAHAYOG

Schemes and implementation of all these schemes involves

need for replacement of different types of looms to

implementing institutions and artisans.

Presently this notification is sought to identify manufacturers

who will be empanelled/registered for supply of :-

a) different types of looms

b) pre-weaving machineries such as Cone winding Machine

(Hanks to Cone winding with 16 spindle)

Page 5 of 22

c) Cone re-winding machine (16 spindle)

d) pirn winding machine (12 spindle)

e) warping unit (sectional warping machine with creel and

weavers beaming unit)

2. Eligibility of the applicants

For determining the eligibility of applicants for their pre-

qualification hereunder, the following shall apply:

The applicant may be Indian manufacturing companies,

partnerships, proprietorship firms, Khadi and Village Industries

Institutions and SSI units registered with MSME.

3. Qualification Criteria

Eligible applicants must seek to meet the following criteria:

1. They should have fully equipped work shop with all

required working infrastructure to manufacture the

tendered item.

2. The firm should have appropriate qualified / trained staff,

the details of which needs to be submitted.

3. The firm should ensure adherence of statutory

requirements of Central and State Government of India

such as safety norms, sales tax/GST norms, TIN number

requirements, state pollution control boards etc.

4. Minimum annual turnover of the manufacturing firm

should be Rs. 50.00 Lakhs. Khadi institutions and units set

up under the REGP/PMEGP scheme of KVIC are exempted

from the minimum turnover criteria.

Page 6 of 22

5. The manufacturer must have minimum 3 years of

experience in machinery manufacturing preferably in

textile equipments/implements/ Charkhas/Looms.

6. The manufacturer must have a minimum capacity of

production of 200 looms annually. Khadi institutions and

units set up under the REGP/PMEGP scheme of KVIC are

exempted from the minimum annual capacity production

criteria.

7. The accessories used for manufacturing of looms should

adhere to industry standard specifications.

The manufacturer should quote price of loom of 50”, 56” & 62” width having 2 treadle/4 treadle separately. Loom details are as under.

1.Complete set of loom with teak wood slay

2.Let off motion 3.Take up motion (5 wheel) 4.Treadles

The following accessories should be supplied along with

the each loom.

1. Metal reed (for Cotton Khadi square fabric of 33 sNm Plain weave)

2. Shuttles (2 Nos.) 3.Healds (8 Nos.)

4.Metallic Heald wires (25000 Nos.) 5.Back Beam (2 Nos.)

6.Cloth Beam/roller (2 Nos.) 7. Pirns/bobbins (50 Nos.)

8.Heddle hooks (2 Nos.)

The Loom and all accessories should be in full working condition.

Page 7 of 22

4. Scope of Work.

1. Manufacturing and supply of different types of looms and

pre-weaving machineries to the khadi institutions shall be

as per :

a. Specification finalized by KVIC.

b. Delivery schedule finalized by KVIC

c. Cost approved by KVIC

2. Strictly adhere to the terms and conditions prescribed by

KVIC with respect to manufacturing and supply of looms

and pre-weaving machineries.

5. Technical Specification:

1. The manufacturing institutions should meticulously adhere

to the Industrial standard specification with respect to all

Parts and other parts used in manufacture of looms and

other machineries as specified below:

I. Looms 1.Gram Laxmi Loom 2.Nepali Loom 3.Sewagram Loom 4.Chhitaranjan loom 5.Vastra Mangal Loom

II. Other machineries 1. Cone winding Machine (Hanks to Cone winding with 16 spindle)

2.Cone re-winding machine (16 spindle) 3.pirn winding machine (12 spindle) 4.warping unit (sectional warping machine with creel and weavers beaming unit)

2. Manufacturers shall use only new and standard

components.

3. The manufacturer shall use spares and accessories having

industrial standards and approved by reputed Quality

Control Organizations.

Page 8 of 22

6. Terms and Conditions:

1. The manufacturing institutions have to extend warranty for

the looms, and allied machineries including the spare parts

and accessories towards manufacturing defects for at least

two years. The defects in the looms or other machinery/

defective parts shall be attended / replaced within 10 days

of the complaints failure to which the supplier is liable for

the loss incurred by the KI and the artisans.

2. Provide after sales service to the institutions as per

mutually agreed terms with KIs, where looms and other

machineries have been supplied.

3. Supply of standard spare parts and extending technical

support services to the KIs including services at the

premises at the user khadi institutions.

4. KVIC shall have the right to verify the infrastructure and

the details mentioned in the bid.

5. KVIC shall have the right to reject the looms and other

machineries supplied by the supplier in case the same are

not in conformity with the specifications.

7. Selection Process

1. The proposals will be opened on the mentioned date in this

document.

2. The Technical Bid will be examined by the Standing

Committee on the basis of responsiveness to the scope of

work, applying the eligibility and evaluation criteria and

points system specified below. Criteria for Evaluation of Technical Proposal Maximum Score

1.Minimum turnover of Rs.50.00 lakhs (average

turnover as per the audited balance sheet for the

last three years)

20

2.Bidder’s relevant experience 20

3. Infrastructure 30

4. Appropriate qualified, trained and skilled staff 20

5. ISO Certification 10

TOTAL 100

Page 9 of 22

3. The technical evaluation will have to score a minimum of

60 marks to be qualified.

4. Bidders who have qualified in the technical bid evaluation

stage alone shall be eligible for financial bid opening.

5. The cost offered by the lowest bidder as evaluated by KVIC

will be considered by KVIC as the floor price (lowest

quoted price) at which KVIC will procure looms and other

machineries from the technically qualified bidders

6. The price quoted for looms and other machines ready to

use and in fully functional condition with all components

and accessories like 2 shuttles, reeds, healds etc as

mentioned at pera 3.7 and 5.1 above.

7. Those bidders who agree to supply at the lowest bid shall

be considered by KVIC for empanelment.

8. Price of looms, accessories and other machineries should

be inclusive of all texes. The duration of the empanelment

will be for 3 years and the price of looms, accessories and

other machineries shall remain constant during the period

of empanelment.

However, KVIC reserves the right to remove the supplier

from the empanelment without assigning any reason.

9. KVIC will determine the maximum production capacity of

manufacturers and arrange equitable distribution of supply

orders of looms and machineries based on their

manufacturing capacity.

8. Earnest Money Deposit

1. Bid Security i.e. Earnest money amounting to Rs. 1,00,000/-

(One Lakh only) in the form of Demand Draft/Bankers

Cheque drawn in favor of “Chief Executive Officer, KVIC,

Mumbai-400 056 on any Scheduled Bank approved by

Reserve Bank of India, must be submitted along with the

Proposal. Earnest Money in any other form will not be

accepted.

Page 10 of 22

2. Khadi Institutions affiliated to KVIC or state KVIB and units

set up under REGP/PMEGP scheme of KVIC are exempted

from submitting EMD.

3. Proposals not accompanied by EMD shall be rejected.

4. No interest shall be payable by the KVIC for the sum

deposited as EMD.

5. The EMD of the unsuccessful bidders would be returned

within one month of finalization of the contract.

6. The EMD shall be forfeited in case of the following events:

a. If Proposal is withdrawn during the validity period or

any extension agreed by the bidder thereof.

b. If the Proposal is varied or modified in a manner not

acceptable to KVIC after opening of Proposal during

the validity period or any extension thereof.

c. If the bidder tries to influence the evaluation process.

d. If it is found later on that any of the information

furnished by the bidder was false or misleading.

9. Performance Bank Guarantee

1. Within 7 days of notifying the signing of the contract, the

manufacturer shall furnish a Performance Bank Guarantees

(PBG), as per format, amounting to 5% of the total

contract value for the entire period of empanelment

including duration of warranty as its commitment to

perform services under the contract.

2. Failure to comply with the requirements shall constitute

sufficient grounds for the forfeiture of the PBG.

3. The PBG shall be released within 60 days after the expiry

of the period of empanelment provided there is no breach

of contract on the part of the manufacturer.

Page 11 of 22

10. The model looms at the following places may be studied if necessary before submitting the tender forms,as per Annexure-A

11. Conflict of interest:

The firm should not supply the looms to the outside agencies

without the knowledge of KVIC.

12. Force Majeure:

Neither party will be liable in respect of failure to fulfil its

obligations, if the said failure is entirely due to Acts of God,

Governmental restrictions or instructions, natural calamities or

catastrophe, epidemics or disturbances in the country. The

party affected by an event of Force Majeure will immediately

notify the other party of such an event and will also notify the

unaffected party on cessation of disability resulting from such

Force Majeure act.

13. Arbitration:

“If a dispute arises out of or in connection with this

assignment, the parties agree either to seek an amicable

settlement of that dispute by conciliation under the ICADR

Conciliation Rules, 1996 or to submit that dispute to Arbitration

under the ICADR Arbitration Rules, 1996”.

14. Jurisdiction:

The contract shall be governed by laws of India and all

Government rules on purchase matter issued from time to time

and in force for the time being and applicable to this contract.

For any legal recourse, only courts in Mumbai shall have the

jurisdiction.

15. Integrity Pact

The qualified manufacturer and supplier will have to enter into

an agreement named Integrity Pact as notified by Ministry of

Finance vide Office Memorandum No. 14(12)/2008-E-II(A)

Page 12 of 22

dated 19.07.2011 in respect procurement transaction / contract

with KVIC to have transparency in the transactions and curb

unfair means.

16. Pre-bid Meeting

1. A Pre-bid meeting will be held at the KVIC office on the date

mentioned in the document. Interested parties shall

nominate representatives to attend the meeting.

2. The nominated person participating in the pre bid meeting

should carry a letter of authorization from the organization

which she/he represents.

3. Any clarification, enquiries with respect to the submission of

application and application guidelines may be sent to the

official mentioned in bid document by post, fax or email. The

response to the clarification shall be provided after the pre-

bid meeting and posted on the KVIC website.

4. KVIC reserves the right not to respond to questions raised or

provide clarifications sought, in their sole discretion, if it is

considered that it would be inappropriate to do so.

5. Nothing in this document shall be taken or read as

compelling or requiring KVIC to respond to any question or to

provide any clarification.

6. No extension of any time and date referred to in this

Guideline shall be granted on the basis or grounds that KVIC

has not responded to any question/ provided any

clarification.

17. Submission of application

The interested parties should submit the tender, which shall

comprise of the following:

a) Letter of Response as per Form - I,

b) Statement of Legal Capacity (the “SLC”) as per Form - II,

c) Technical Bid(in duplicate) as per Form - III

d) Financial Form as per Form - IV

e) Non-Refundable Tender document fee of Rs. 2000/- in the

Page 13 of 22

form of Demand Draft drawn on any Scheduled Bank in

favour of Chief Executive Officer, KVIC, Mumbai-56.

The forms should be duly signed by bidder’s duly authorised

representative.

Technical Bid and Financial Bid should be submitted in

two separate sealed envelopes.

Submission of the aforesaid documents by fax, e-mail or any

other electronic means will not be acceptable.

The application documents duly completed along with EMD and

other enclosures in support of the bid should be submitted in a

sealed envelope superscribed “Private and Confidential –

Application for empanelment of manufacturers to supply Khadi

implement (looms)”.

Director - Khadi

Khadi & Village Industries Commission Gramoday, 3, Irla Road, Vile Parle (West), Mumbai -56. Phone / Fax: 022 -2671 5860;Email: directorkhadi@gmail.com

18. Acknowledgement by Applicant

It shall be deemed that by submitting the application, the

applicant has:

a) Made a complete and careful examination of the technical

and financial bid;

b) Received all relevant information requested from the KVIC;

c) Accepted the risk of inadequacy, error or mistake in the

information provided in the technical bid or furnished by or

on behalf of the KVIC relating to any of the matters referred

to in section on other terms and conditions mentioned above;

and

d) Agreed to be bound by the undertakings provided by it under

and in terms hereof.

Page 14 of 22

19. Disclaimer

This advertisement does not constitute and will not be deemed to constitute any commitment on the part of KVIC. Furthermore, this advertisement confers neither any right nor expectation on any party to participate in the bid process. KVIC reserves the right to withdraw from the process or any part thereof, to accept or reject any or all bids at any stage of the

process and/or modify the process or any part thereof or to vary terms at any time without assigning any reason whatsoever, even if KVIC finds a party/parties eligible to bid. No financial or any other obligation will accrue to KVIC in such an event. Further, KVIC shall not be responsible for non-receipt of correspondence sent by post/courier/e-mail.

Sd/- Director (Khadi)

Page 15 of 22

FORM-I: LETTER OF RESPONSE

(To be forwarded on the letterhead of the bidder submitting the application)

Reference No.______________ Date ___________ Director - Khadi Khadi & Village Industries Commission 3, Irla Road, Vile Parle (West), Mumbai -56

Sub: Application for manufacturing and supplying khadi implement (different types of looms and pre-weaving machineries) to the khadi programme implementing institutions Sir, This is with reference to the advertisement dated ___________ inviting applications for manufacturing and supplying khadi implements (different types of looms and pre-weaving machineries) to the Khadi programme implementing institutions. As specified in the advertisement, we have read and understood the contents and Guidelines and submit application and are desirous of participating in the above process: We propose to submit our application in individual capacity as __________________ (insert name of interested party) We believe that we satisfy the eligibility criteria set out in the Guidelines of the application. We certify that we have not been convicted by a Court of law or indicted or adverse orders passed by a regulatory authority which would cast a doubt on our ability which relates to a grave offence that outrages the moral sense of the community.

Page 16 of 22

We further certify that no investigation by a regulatory authority is pending either against any of us or against our sister concerns or against any of our CEOs or any of our Directors/Managers/ Employees. We undertake that in case due to any change in facts or circumstances during the pendency of the process for invitation, we are attracted by the provisions of disqualification in terms of the subject guidelines, we would intimate the KVIC of the same immediately. The Statement of Legal Capacity, Technical Bid, Financial Bid and Statement as regards to any indictment by any regulatory authorities, as per formats indicated hereinafter, duly signed by us/respective members, who jointly satisfy the eligibility criteria, are enclosed. We shall be glad to receive further communication on the subject. Yours faithfully, Authorised Signatory For and on behalf of the party Enclosure: 1. Statement of Legal Capacity 2. Technical Bid 3. Financial Bid 4. Statement as regards to any indictment by any regulatory authorities.

Page 17 of 22

FORM–II: STATEMENT OF LEGAL CAPACITY

(To be forwarded on the letterhead of the interested party submitting the application)

Reference No.______________ Date ___________ Director - Khadi Khadi & Village Industries Commission 3, Irla Road, Vile Parle (West), Mumbai -56 Sub: Application for manufacturing and supplying khadi implement (different types of looms and pre-weaving machineries) to the khadi programme implementing institutions Sir, This is with reference to the advertisement dated ___________ inviting applications for manufacturing and supplying khadi implements (different types of looms and pre-weaving machineries) to the Khadi programme implementing institutions. We have read and understood the contents of the Guidelines for application and the advertisement and pursuant to this hereby confirm that:

We satisfy the eligibility criteria laid out in the Guidelines for application.

We have agreed that ______________ (insert individual’s name) will act as our representative on our behalf and has been duly authorized (vide Board Resolution dated _________*) to submit this letter. Further, the authorized signatory is vested with requisite powers to furnish such letter and Technical and Financial Bid and authenticate the same.

Yours faithfully, Authorised Signatory For and on behalf of party *Please attach a certified true copy of the extract of the relevant Board

Resolution or equivalent in case interested party is not a company

Page 18 of 22

FORM-III: Technical Bid

(To be submitted in respect of interested party) (Name of the interested Party)

___________________________

1. Constitution (Tick, wherever applicable) i) Limited Company (Public/Private/ Producer):

ii) Proprietor / Entrepreneur :

iii) Others, if any (Please specify) Society / Charitable Trust / Cooperative

2. Company profile : PAN, TIN, GST, Latest IT clearance details

3. Business description: (Should also cover the following) Name of Products Manufactured, Number of full / part time employees, Awards and recognitions

:(Bidder may use separate page for writing business description – Not to exceed more than 5 pages)

4. Date & Place of incorporation :

5. Date of commencement of business / activity

:

6. Number of years work in Textile machinery/ equipment manufacturing

:

7. Number of years work in Khadi machinery manufacturing

:

8. Whether ISO Certification obtained (If yes, mention details)

:

9. Details of Infrastructure ,machineries etc available

:

10. Whether accessories used for manufacturing of looms and pre-weaving machineries adhere to Industrial standards (Provide Details)

:

Page 19 of 22

11. Whether products manufactured by the manufacturer in the workshop adhere to Industrial standards (Provide Details)

:

12. If not then is it certified by any textile

research association or similar

agencies/bodies? (Provide Details)

:

13. Whether obtained certificate from

appropriate pollution Control Board

(Provide Details)

14. Full address including phone number./fax number

i) Registered Office :

ii) Head Office :

15. Address for correspondence :

16. Contact Person(s): i) Name: ii) Designation: iii) Phone No.: iv) Mobile No.: v) Fax No.: vi) Email:

Yours faithfully, Authorized Signatory For and on behalf of the party

Place: Date:

Page 20 of 22

To be put as annexure as a part of Form III:

i. The Audited Balance Sheet and Profit & Loss Account of the bidder

for the last 3 financial years

ii. Certificate (on letterhead of the interested party) stating that there

has been no indictment by any income tax, sales tax, customs,

excise or any other regulatory authorities (please give details of the

individual cases of indictment, if any). Kindly refer format given in

Form V.

iii. A certificate from a chartered accountant/auditor certifying the Net

worth as on March 31, 2017 to assess the economic viability of the

unit.

iv. ISO certificate

v. Implements for production of which BIS license obtained

vi. Product certification obtained from professional organisations such

as ATIRA/BTRA/SITRA/NITRA or any other CSIR approved

laboratories/ Government bodies

vii. Pollution Control certificate from respective State Pollution Control

Boards

viii. Appropriate qualified, trained and skill personnel

Note: Use additional sheets if required. However please follow the order

adopted in the Format provided. If the interested party is unable to

respond to a particular question/ request, the relevant number must be

nonetheless be set out with the words “Not Applicable” against it.

Page 21 of 22

FORM-IV: Financial Bid

Name of the interested Party ___________________________

Financial Quote for single item We quote our firm price’s for the loom and machineries in accordance with the KVIC-RfP No: KPM/Looms/RfP/2017-18 .

Details Final Price (inclusive

all taxes)

50”

(Rs.)

56”

(Rs.)

62”

(Rs.)

I. Looms with Accessories 1.Gram Laxmi Loom 2.Nepali Loom 3.Sewagram Loom 4.Chhitaranjan loom 5.Vastra Mangal Loom II.Other machineries 1. Cone winding Machine (Hanks to Cone winding with 16 spindle)

2.Cone re-winding machine (16 spindle) 3.pirn winding machine (12 spindle) 4.warping unit (sectional warping machine with creel and weavers beaming unit)

(Final price is the rate inclusive all taxes at which full working loom shall be supplied.) Yours faithfully, Authorized Signatory For and on behalf of the party

Place: Date:

Page 22 of 22

FORM - V: STATEMENT AS REGARDS TO ANY INDICTMENT BY ANY REGULATORY AUTHORITIES

(To be forwarded on the letterhead of the interested party submitting the application)

Date:

Director - Khadi Khadi & Village Industries Commission 3, Irla Road, Vile Parle (West), Mumbai -56

We certify that there has been no indictment by any income tax, sales

tax, customs, excise or any other regulatory authorities{except as

stated below:}1

Yours faithfully,

Authorized Signatory

For and on behalf of party

Name:

Designation:

Address & Contact Number:

1 Delete, if not applicable.

1

Annexure –A

DETAILS OF LOOMS AVAILABLE IN THE FOLLOWING KHADI

INSTITUTIONS & STATE KVI BOARDS

VASTRA MANGAL LOOM: Manufactures by Ambar Utpadan & Research Centre Gonal (Gujarat).

1. Hadoti Khadi Gramodyog Samiti Ladpur, Village & Dist- Kota, Post- Vinoba Badi, Pin-324 006 (Rajasthan ) Secretary, Kamal Kishor Sharma Phone -

09929297218.

2. Rajasthan Adim Jati Sevak Sangh ajmer road P.O.sodala, Dist - Jaipur (Rajasthan ) Secretary BANWARI LAL GAUR Mob. 9414052913

3. M.P. Khadi Gramodyog Board , 74 Arera Hills, Bhopal (M.P.) Secretary - SHRI VIJAY KUMAR SAINI mob. 7509357039

4. Chhatisgarh Khadi Gramodyog SANSTHAN B.D.MAHANT UPNAGAR,

Janjgir-Champa NAILA JAJGIR, P.O.NAVAGARH, Dist- JANJGIR-CHAMPA (Chhatuisgarh) Secretary - SHRI.VINAYAK JI, Mob.- 9826434696

5. Gopalgunj Khadi gramodyog Sangh, ART COLLEGE ROAD ,At, Post & Dist- Gopalgunj (Bihar) Secretasry - BIPIN BIHARI RAI, Mob. 9135004555

6. Khadi Gramodyog Sahakari Utpadak Sangh, Post- Hudali, Dist- BELGAUM

(KNT) Chairman - SHRI V.A. BALAKUNDI Mob. 9845991165

7. Marathwada Khadi Gramodyog Samiti, DR.RAJENDRA PRASAD RD, P.O. &

Dist- Nanded (Maharashtra) Secretary- GOPAL RATNAPARKHE Mob.- 9579251200

8. Khadi Gramodyog Prayog Samiti, -P.O.- Gandhi Ashram Dist- Ahmedabad

(Gujarat) Secretary - GIRIJASHANKAR RAI, Mob- 9426336642

9. Shri Laxmi Khadi Gram. Kaigarika Sangh BURUJANAHATTI , CHITRADURGA

, P.O- BURUJANAHATTI, Dist- CHITRADURGA , (KNT), Secretary - M S SURESH, Mob- 9448423652

10

.

Harihar Charkha Mattu Gramodyog Sahakara Sangh , RIVERE Road,

Harihara, DAVANAGERE, P.O. – Harihara, Dist- DAVANGERE, (KNT), Secretary - SHRI K. BASAPPA, Mob- 9886607774

SEVAGRAM LOOM: Manufactuers by Gram Seva Mandal Wardha (Mahaeashtra)

1. Gram Sewa Manmdal P.O. – Gopuri, Dist- Wardha (Maharashtra)

Secretary - NARAHARI SATPUTE Mob. 9422633771

2. Arunachal Pradesh Seva Sangh, P.O- Doimukh, Dist Papumpara (Arunachal

Pradesh) Secretary - JAGAT HAZARIKA Mob - 9436671661

NEPALI LOOMS: Manufactuers by Neelaveni Cottage Industries NGR Puram, Coimbatore

(Tamilnadu)

1. Tamilnadu Sarvodaya Sangh,P.O - GANDHI NAGAR,, Dist- Tirupur,

(Tamilnadu) Secretary - J JOHNPETER Mob- 9443239758

2. Coimbatore North Sarvodaya Sangh, 255, NAWAB HAKEEM ROAD, P.O -& Dist- COIMBATORE (TN) Secretary- R. RANGESH Mob- 9994315928

3. Vellakovil Sarvodaya Sangh, NEW 387/OLD 251,KARMEGAM THEATER ROAD,VELLAKOVIL, P.O. Vellakovil, Dist- Tirupur, (Tamilnadu) Secretary -

V P SOMASUNDARAM, Mob- 9790013615

4. Kangeyam Sarvodaya Sangh, 83, AGRAHARAM STREET, P.O. –KANGAYAM, Dist- Erode , (Tamilnadu) Chairman - S THANGARAJ Mob – 9443242620

5. Pollachi Sarvodaya Sangh, 36 Venkataramanan Street, P.O – Pollachi, Dist-

2

COIMBATORE (Tamilnadu)Secretary - N NALLA SUBRAMANIYAN Mob - 9688779524

6. Padiyur Sarvodaya Sangh, At- TIRUPUR P.O. -Padiyur, Dist- ERODE (Tamilnadu) Secretary - SANKARANARAYANAN Mob- 9443839304

7. Mulanur Sarvodaya Sangh, 65, VADUGAPATTI ROAD, P.O.- MULANUR, Dist

- TIRIPUR Mulanur,(Tamilnadu), Secretary - PANDITHURAI K Mob- 9487042189

8 Annur Sarvodaya Sangh, 9/34 NEHRUJI STREET,, P.O- ANNUR, Dist- COIMBATORE Annur, (Tamilnadu), Secretary - V. GANGADARAN Mob -

9095017067

9. Puliapatti Sarvodaya Sangh, 385/226 NEHRU NAGAR,PUNJAIPULIAMPATTY,P.O. – PULIAMPATTY, Dist- Chennai ,

(Tamilnadu)Secretary - K VELUMANI Mob- 9942515708

10

.

Erode Sarvodaya Sangh, 351/1 MUTHAMPALAYAM HOUSING UNIT, PHASE

–II, P.O- KASIPALAYAM (PO), Dist- Erode, (Tamilnadu), Secretary - T.POOPATHI, Mob- 9524896871

GRAM LAXMI LOOMS

Manufactuers by Saghan Kshetriya Vikas Samiti, (Rajasthan)

1. Vinoba Gramodyog Vikas Sansthan Kaushal Bhavan, P.O- SHASTRI

NAGAR, Dist. Banda (Uttar Pradesh.)Secretary - SUJEET KUMAR Mob- 9389951288

2. Kshetriya Shri Gandhi Ashram Neplapur,P.O. & Dist- Sitapur (Uttar

Pradesh) Secretary - RAKESH RAI Mob - 9415472327

3. Kshetriy Shri Gandhi Ashram, P.O- Akbarpur , Dist- AMBEDKAR NAGAR

(Uttar Pradesh) Chairman - SHREE HARISH CHANDRA PATHAK Mob- 9450495629

4. Kshetriy shri Gandhi Ashram, RATANPURA MAU CAMP OFFICE JANGIPUR,

Post- GHAZIPUR , Varanasi (Uttar Pradesh)Secretary, NAYAN KUMAR GUPTA Mob: 9026569212

5. Khadi Gramodyog Samgra Vikas Samiti,Post- Lamba khera, Dist- Rampur, Meerut (Uttar Pradesh) Secretary, TARA DEVI, Mob: 9410870556

6. Rajasthan Adim Jati Sevak Sangh ajmer road P.O.sodala, Dist - Jaipur

(Rajasthan ) Secretary BANWARI LAL GAUR Mob. 9414052913

7. Ramprakash Khadi Gramodyog Seva Ashram, mayabset, At+po.-

Meghwan,via-basaitha, Distt. Madhubani (Bihar) Secretary- RAMESH KUMAR Mob: 7250042303

8. Muzaffarpur Zilla Khadi Gramodyog Sangh, SARVODAY GRAM , Post-

RAMNA , Dist-Muzaffarpur, (Bihar) Secretary - SHREE BIRENDRA KUMAR, Mob- 9472563918

9. Shri mahadav Smrati Mandir, Post- Roja, Dist- Gajipur, (Uttar Pradesh) Secretary - RUPESH SINGH Mob- 9899764787

10

.

Udaya Khadi Gramodyog Sansthan, At & Post – ELIA/ Chandauli, Dist-

VARANASI (U.P.) Secretary - KUWAR SINGH Mob - 8090990809

CHHITARANJAN LOOMS Manufactuers by Radha Bimala Enterprise post- Fulia Buincha, Nadia (W.B.)

1. Resham Kutir Silpa, Vill & Post- Bamongram, via-Sujapur, Dist- Malda, (W.B.) Chairman - MD. SALAUDDIN Mob - 9851291898