Upload
lylien
View
217
Download
1
Embed Size (px)
Citation preview
KFE
Ball
Valv
es
5
KFE Ball Valves
KFE Ball Valves for Heating Systems 4-5 KFE Ball Valves for Sanitary Systems 6 KFE Ball Valves for Solar Systems 7 Technical Drawings 8-9
5
5
2Product Catalogue 2009
KFE Ball ValvesThe benchmark for quality and reliabilityThe Simplex KFE Ball Valve is a success story in its own right: some 40 million have been sold – top seller in Ger-many, top quality and simplicity in itself to install thanks to its seal. The cap cannot get lost, as it is attached to the body. Further advantages speak for themselves:
1 Secure installation thanks to special self-sealing thread connection
2 Precise, axial positioning by means of counter-nut
3 Accurate positioning of the blind cap by means of an inox clamp – no chain or loop to be broken
4 Concealed possibility for actuation using the blind cap, which serves as a handwheel
for innovation and lasting
design quality
KFE Ball Valves Product Advantages
Wing lever easily removed to stop unauthorised in-terference
SolarSanitary
4
HEating3
1 2
Cap as closureCap as handle
5
3 Product Catalogue 2009
It all depends on the seal.
Threaded self-sealing connections by Simplex have long since proved themselves a million times over. No wonder, they are the result of many years development work and a vast depth of know-how. The advantages are convincing: threaded self-sealing connections are permanently tight, and it is not necessary to make a seal with hemp.
The secret of their success lies in five components which Simplex has brought together in an optimum way:
The Raw MaterialDue to temperature change and wear and tear, heating installations require the best in sealing technology. Simplex seals are manufactured in accordance with our own expecially developed methods.
The Chemical Bonding
Seals based on EPDM with sulphur crosslinking systems may shrink and cannot provide permanent security under influence of high temperature. Simplex seals are manu- factured from a peroxyde crosslinking system raw material mixture thus granting highest durability and quality.
The Vulcanisation
In order to resist temperature changes seals must be vulcanised carefully at full extend affording long produc-tion cycles at low output rates. To fulfil these requirements we manufacture the seals in our modern highly reliable facilities.
The Degree of Hardness
The hardness of the Simplex seals is set to 85° shore and is, therefore, harder than common sealings made of elastic materials.
The Coating
The white coating adds mechanical resistance to the Simplex seals making them abrasion-free and soft-gliding.
Special Simplex self-sealing Thread Seal
„Simply screw in without a se-parate seal, that‘s what I call Simplex convenience and quality!“
5
4Product Catalogue 2009
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 3/4” 9 1 50 706 F10680
KFE Ball Valves for Warm Water Heating Systems
KFE Ball Valve PN 16 with Leverversion for heating systems, 1/2“■ Without hose connection
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10637
■ - ■ 1/2” 8 1 50 706 F10670
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10638
■ - ■ 1/2” 9 1 50 706 F10671
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10634
■ - ■ 1/2” 8 1 50 706 F10664
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” - 1 50 706 F10646
■ - ■ 1/2” - 1 50 706 F10676
■ With hose connection
version for heating systems, 3/4“■ With hose connection
version for heating systems, 1/2“, with female thread■ Without hose connection
■ With hose connection
Area of application:Warm water heating systemsmax. pressure: 10 barmax. temp.: 110°C continuous operating temperature, 130°C short-term
NEWNEW
available second half of 2009.
available second half of 2009.
NEWNEW
5
5 Product Catalogue 2009
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10640
■ - ■ 1/2” 9 1 50 706 F10673
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10641
■ - ■ 1/2” 9 1 50 706 F10674
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10644
■ - ■ 1/2” 9 1 50 706 F10677
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10645
■ - ■ 1/2” 9 1 50 706 F10678
KFE Ball Valves for Warm Water Heating Systems
Material warm water heating systems Body Hot-pressed brass, NiBlind cap Hot-pressed brass, NiClamp Stainless steelNipple BrassBall Brass, chromedSpindle BrassCounter-nut BrassHose connector Plastic, reinforcedO-ring EPDMSeal EPDMBall-seal PTFE
KFE Ball Valve PN 16, without Lever version for heating systems, 1/2“activation by closure cap.
■ Without hose connection
■ With hose connection
■ With hose connection
KFE Ball Valve PN 16, long Version with Leverversion for heating systems, 1/2“
■ Without hose connection
Area of application:Warm water heating systemsmax. pressure: 10 barmax. temp.: 110°C continuous 130°C short-term
5
6Product Catalogue 2009
KFE Ball Valves for Sanitary Systems
Area of applicationSanitary systems max. pressure: 16 barmax. temperature 95˚C
KFE Ball Valve PN 16 with Leverversion for sanitary installations, 1/2“■ Without hose connection
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10639
■ - ■ 1/2” 8 1 50 706 F10669
Material sanitary systemsBody Hot-pressed brass, NiBlind cap Hot-pressed brass, NiClamp Stainless steelNipple Brass, dezincification-resistantBall Brass, chromedSpindle BrassCounter-nut BrassHose connector Plastic, reinforcedO-ring EPDMSeal EPDMBall-seal PTFE
Sample installation:
Simplex KFE Ball Valve F10639 for draining a drinking water system
5
7 Product Catalogue 2009
Area of applicationSolar systems* max. pressure: 16 barmax. temperature: 200˚Ccontinuous operating temperature: 180˚C* Fluid: water-glycol-mixture
KFE Ball Valves for Solar Systems
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10647
versionG
technical drawing
page
packing unitPG art.-no. price
€/pc.nickel-plated straight angle small big
■ ■ - 1/2” 8 1 50 706 F10648
KFE Ball Valve PN 16 with Leverversion for solar, 1/2“ Fluid: water-glycol-mixture
n Without hose connection
n With hose connection
Material solar systems Body Hot-pressed brass, NiBlind cap Hot-pressed brass, NiClamp Stainless steelNipple BrassBall Brass, chromedSpindle BrassCounter-nut BrassHose connector Plastic, reinforcedO-ring AFLASSeal FKMBall-seal PTFE, reinforced
Sample installation: KFE Ball Valve for solar
5
8Product Catalogue 2009
Technical Drawings KFE Ball Valves
F10637, F10639, F10647
F10638, F10648
a B C D E
1/2“ 3/4“ 46,5 39,5 11
a B C D E F g
1/2“ 3/4“ 46,5 39,5 11 27,5 14,5
F10640
a B C D E
1/2“ 3/4“ 64 39,5 11
F10641
F10644
a B C D E F g
1/2“ 3/4“ 64 39,5 11 27,5 14,5
a B C D E
1/2“ 3/4“ 46,5 24 11
F10645
a B C D E g
1/2“ 3/4“ 46,5 24 11 14,5
F10669, F10670
a B C D E F
1/2“ 3/4“ 26 22 11 39,5
AAA
EEE CCC
BBB
DDD
F10637F10637
EEE
AAA
CCC FFF
GGG
DDD
BBB
F10638F10638
BBB
DDD
AAA
EEE CCC
F10640F10640
AAA
EEE
GGG BBB
DDD
CCC FFF
F10641F10641
BBBAAA
EEE CCC
F10644F10644
DDD
FFF
GGG
CCC
AAA
EEE
F10645F10645
DDD
BBB
F10670F10670
AAA
BBB
EEE CCC
FFFDDD
F10634
a B C D
rp 1/2“ 3/4“ 61 39,5
F10664
a B C D E
rp 1/2“ 3/4“ 40,5 22 39,5
F10634F10634
BBB
CCC
DDD
AAA
F10664F10664
BBB
DDD
AAA
CCC
EEE
5
9 Product Catalogue 2009
Technical Drawings KFE Ball Valves
F10671
a B C D E F g H
1/2“ 3/4“ 26 22 11 39,5 14,5 27,5
F10673
a B C D E F
1/2“ 3/4“ 43,5 22 11 39,5
F10671F10671
AAA
FFFDDD
EEE
HHH
GGG
CCC
BBB
BBB
DDD
AAA
EEE CCC
FFF
F10673F10673F10674
F10677
a B C D E F g H
1/2“ 3/4“ 43,5 22 11 39,5 14,5 27,5
a B C D E F
1/2“ 3/4“ 26 22 11 24
F10678
a B C D E F g H
1/2“ 3/4“ 26 22 11 24 14,5 27,5
F10680
a B C D E F g
3/4“ 3/4“ 50 42 11 28 20
F10674F10674
EEE CCC
AAA
GGG
HHHDDD
BBB
FFF
AAA
DDD
BBB
EEE
F10677F10677
CCC
FFF
AAA
DDD
GGG
HHHFFF
CCCEEE
BBB
F10678F10678
F10680F10680
EEE
BBBAAA
FFF
GGG
DDD
CCC