VISIÓN SENSOR for Inkjet Cable Marking

Application project.Printed verification code.

Keyence is a trademarkKBA-Metronic is a trademark

Images property of KBA-Metronic (*)Images property of KEYENCE (**)

KBA-Metronic GmbH seller for Spain is ImprymaKeyence seller for Spain is BITMAKERS

Andres Martos (c) 2013

Keyence IV visión sensor for cable marking Control of missing prints for cable industry

•Direct plug on AlphaJet EVO,

•Trigger signal out, status out.

•Power Supply from AJ EVO

•Signal beacon included on AJ EVO

•Monitor screen optional

•Non expensive aplication. MkI /IIAndres Martos © 2013

Vision Sensor application MKI // Basic option

Andres Martos © 2013

•24 volts DC from AJD•Trigger from AJD•Beacon activation signal•Connection with terminal / monitor•Programming adjustment terminal monitor•Encoder signal for synchronization

•Basic detection system for printing errors•Not Print Detection•Phasing failure detection•Uncontrolled motion detection

d

Andres Martos © 2013

Vision Sensor application MKII // Double Print System

•Exclusive system for printing error detection

•Not Print Detection•Phasing failure detection•Uncontrolled motion detection•Intelligent change inkjet system•Non stop printing utility•Integrated

•Anomalies can manage without stopping the printing and production line.

Andres Martos © 2013

Vision Sensor application MKIII // Double Print System

•Complex CV system for printing error detection

•Not Print Detection•Phase failure detection•Uncontrolled motion detection•Intelligent change inkjet system•Non stop printing utilityIntegrated

•Anomalies can manage without stopping the printing and production line.•Rapport /log on distance/time job order option.•Multi cam posibility for multiple check points on print.•OCR function

Technical Data AlphaJet EVO CIJ

Andres Martos © 2013

Housing: stainless steel

Display: 10,4" TFT-Touchscreen

Display 800 x 600 px with user-friendly interface

Protection class: IP 65

Weight: 31 kgs

Dimensions control unit: 700 x 320 x 320 mm

Dimensions print head: 145 x 40 x 40 mm

Print heads: 1

Connected loads: 110/230 V +/- 10%

Operating temperature: 5° bis 45° C

Relative air humidity max.: 90%, not-condensing

Compressed air required: No

Interfaces: internal Ethernet, 2 x RS 232,2 x parallel inputs (product sensor, encoder)Remote-socket, digital I/0 port, USB-connection

Alarmrelais: Yes

Ink system: 1.000 ml

Solvent recovery system: Yes

Print head excess pressure term.: Yes 

 Print head clearance: 1 - 25 mmType height:0,8 - 15 mm Print lines:8 (5 x 5 Matix)

Print speed: up to 2.800 characters/sec. Print resolution:up to 48 Pixel

Dimensions KEYENCE IV series Vision Sensor

Andres Martos © 2013