Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Key Innovative Technologies in HVAC
Contents
Introduction to Mammoth Group
Key Products of Mammoth HVAC
Key Technologies of Mammoth
Introduction to Rosemex Group
Key Products of Rosemex
Key Technologies of Rosemex Cooling Towers & Evaporative Condensers
UAE Distributor for Mammoth & Rosemex
Mammoth HVAC
Mammoth Group was established in 1935 in Minnesota USA, and MammothChina was established in Shanghai China in 2002 to manufacture energy savingproducts from ½ to 1,800 Ton. Mammoth has been creating comfortableindoor climates throughout the world, from Beijing, New York to Buckinghamwith HVAC equipment to meet specific project requirements, incorporatingthe best in energy efficiency, innovation, quality, performance and value.
Products include, but not limited to, geothermal & water source heat pumps,air & water-cooled commercial air conditioning units, fan coils, AHU, VRF, VAVbox, screw chillers, and energy recovery units. Mammoth has been recognizedas a leader in providing custom designed Total Energy Solution HVAC Systems.
Key Products of Mammoth
• Water Cooled Centrifugal Chiller – 500 to 2800 Tons
• Water Cooled Screw Chiller- 60 to 1100 Tons
• Air-Cooled Screw Chiller & Heat Pump 55 to 800 Tons
• Packaged Rooftop Units 2.8 to 51 Tons
• DC Inverter VRF System 7.1 to 70 Tons
• Air Handling Units - 1000 to 50000 m3/h
• Fan Coil Units - 320 to 2400 m3/h
Water Cooled Centrifugal chiller
Single compressor 500RT-1400RT Twin compressor 1500RT-2800RT
Centrifugal Chiller – Features
• HFC R134a environmental refrigerant
• High efficiency two stage centrifugal compressor
• Efficient spray film type (falling film) evaporator
• Throttle element using industry-leading fixed orifice plates
• Internal oil cooler, refrigerant cooled, maintenance free
• Independent oil return system, guarantee timely return oil under any load
• PID/Micro controller, with PID operation and anti-surge function
• 380V unit start type: Y-△ start、soft start、frequency conversion start
• 11KV unit start type :direct start and reactance start
• Lead time – 60 to 75 days ex-factory
Two Stage Centrifugal compressor
Two stage compression
▪ High cooling efficiency - COP:6.11
▪ Wide operation range
Semi-hermetic motor
▪ Using motor and compressor integrated, use of flange seal, there will no refrigerant leakage.
▪ Use liquid refrigerant cooled, low running temperature & high efficiency
▪ Mechanical room only needs the general ventilation equipment
▪ Low noise operation.
Centrifugal Chiller - Operation Range
Capacity adjustment method: Inlet guide vanes & stepless control
Capacity range
1 Fix frequency unit
single compressor unit:20%~100%
dual compressor unit :10%~100%
2 inverter unit
Single compressor Unit:10%~100%
Dual compressor unit:5%~100%
Centrifugal Chiller - Economizer
• The economizer will separate vapor and liquid effectively in
the economizer
• The separated vapor will enter into the compressor to
complete the secondary compression
• Oil contains refrigerant from evaporator will be heated to
vapor and the oil returns back to compressor oil tank
• High temperature lube oil from compressor will enter
economizer first to be cooled down to proper oil
temperature, then it is injected into parts of compressor
which need to be lubricated
Centrifugal Chiller – Customized Products
• VFD Chiller - max power up to 1000kW(3φ-380V-50Hz)
• High evaporation temperature centrifugal chiller for industrial plant applications, Temperature, humidity independent control.
• Leaving chilled water TEMP range:12~20℃
• Entering cooling water TEMP range:24~32℃
• Flooded unit customization
• Cupro-Nickel heat exchanger customization
• Large temperature difference small flow unit customization
• Heat Recovery unit - heat recovery unit can effectively heat the hot water or production process hot water, not only achieve waste heat utilization, but also to reduce the heat pollution generated by condensation, and reduce the cooling tower operating costs and noise.
• High efficiency (COP) unit customization
• High IPLV unit customization (Dual IGV compressor)
• Other customer requirements Customization
COOLING TOWERS &
EVAPORATIVE CONDENSERS
ABOUT ROSEMEX
ROSEMEX Group, incorporated in 1969 with its headquarters in Montreal,
Canada, is a manufacturer of high-quality heat exchange products used for
heating, ventilation and air conditioning in commercial and industrial
applications. These products include heating products, cooling towers, fluid
coolers, evaporative condensers, patented VAV air valves, heat pumps, heat
recovery units, air purification units, roof top units, induction units, chillers, air
handling units, fan coils, ORC Organic Rankin Cycle, and many more..
Rosemex has been an exporter of energy saving equipment globally for the
HVAC industry and meets ISO 9001, ARI, CSA, IBR, CWB, CTI, the
American Institute of Refrigeration STD-201 CTI, GB/T19001 -2008 and
GB/T24001-2004.
Products
1.Open Type Cooling Tower (Lateral Flow)75 RT to 3313 RT
2.Closed Circuit Cooling Tower (Lateral Flow)71 RT to 1810 RT
3.Evaporative Condenser
Water Spray Distribution System
Key Technologies
Water spray distribution system utilizes self-balance buffer tank to provide an evenly pressurized uniform water distribution by gravity.
Consists of water inlet pipe valve, water distribution pipes, pre-cooling fill, nozzles, make up water supply device, drainage device and water treatment.
Fills are designed with the most suitable flame-retardant PVC material to give the best thermal performance taking into consideration the ventilation, water quality and maintenance conditions.
Fills maximizes the heat exchange surface for higher efficiency.
Fills are suspended on galvanized steel pipes for easy maintenance and effective evaporation. The integral design of the louver and fill enables the collection of water without additional device to reduce the drift loss to less than 0.001%.
Key Technologies – Fills Spray System
Modular Design
Drift Eliminators
Detachable Coil
Ensures easier assembly and reduces siteinstallation labor cost. Only have to connectupper box and lower box together.
Detachable coil, convenient for maintenance and efficient design for best drainage.
High efficient PVC drift eliminators reduceentrained water droplets from the airdischarge and save water.
Fluid Control Trading LLC, was established in 2004 withthe objective of providing complete range of MEPsolutions for HVAC & Plumbing under one roof.
FCT is also the exclusive agent for flowconME srl, Italyfor static valves, offering an extensive range of bothManual and Electrical valves and WRAS approvedvalves. Apart from valves, FCT also provides ControlValves, PRVs, Meters, Thermostats, Electrical &Pneumatic valve actuators, Threaded Fittings, Expansionjoints and a wide range of flanges & fittings of sizes from15mm up to 3000mm.
UAE DISTRIBUTOR
We provide Engineering Solutions for:
• HVAC & Plumbing
• District Cooling Plants
• Desalination
• Waste Water Treatment
• Power Stations
• Horticulture & Poultry Farms
• Oil, Gas & Petrochemical
• RO Plants
Our Brands
Thank You
linkedin.com/company/fct-me/