KERRY INGREDIENTS FACILITY EXPANSION (BANGPOO …Document Reference: 077/GES/BoQ/SUMMARY Rate Project Name: Kerry Ingredients Facility Expansion 7.1.26 12mm. CLEAT Plate ; complete

Revision 0 – July 2008

KERRY INGREDIENTS FACILITY EXPANSION, (BANGPOO INDUSTRIAL ESTATE, SAMUT PRAKARN)

BILLS OF QUANTITIES

SECTION 2 – STRUCTURAL WORKS

Employer: Kerry Ingredients Thailand Ltd. Section 2

Structural Works

Structural Works

Item Description Qty Unit Amount

Material LabourA Structural Works

A.1 Demolition Works.1.1 Work #1- Demolish Existing RC.Curb, RC.road, Footpath, Lawn,

Underground, RC. Pipe, RC. Manhole, as Drawing no. A-003 (Clouded Area) Item

1.2g p

Road and Foot path, Relocate Flagpole as Drawing no. A-003 (Clouded Area); New RC road, footpath, and Flagpole will be measured seperately Item

1.3 Work #3- Demolish Existing storage house, Footpath, RC. Ramp as Drawing no. A-003 (Clouded Area) Item

1.4 Work #4- Demolish Existing Floor Finish, ceramic tile, wall, door, ceiling, toilet fixtypes as Drawing no. A-003 (Clouded Area) Item

1.5 Work #5- Demolish Existing Floor Finish, ceremic tile, wall, door, ceiling, toilet fixtypes as Drawing no. A-003 (Clouded Area) Item

1.6 Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.7 Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.8 Work #8- Demolish Existing Door and close with new wall as Drawing no. A-003 (Clouded Area) Item

1.9 Work #9- Demolish Existing wall and renovate wall for new opening and doors as Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.10 Work #10- Demolish Existing wall and renovate wall for new opening and doors as Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.11 Work #11- Demolish Existing wall and renovate wall for new opening and doors as Drawing no A-003 (Clouded Area); door and frame

Document Reference: 077/GES/BoQ/SUMMARY

Rate

Project Name: Kerry Ingredients Facility Expansion

To Collection

and doors as Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.12 Work #12- Demolish Existing RC. Slab and relocate existing dust collectoras Drawing no. A-003 (Clouded Area); New Tiles will be measured seperately Item

1.13 Work #13- Demolish Some Existing Shaft wall and renovate for expansion as Drawing no. A-003 (Clouded Area); Expansion works will be measured seperately Item

1.14 Work #14- Demolish Existing wall and renovate for new doors and windows as Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.15 Work #15- Demolish Existing RC. Canopy and repair surface for paint as Drawing no. A-003 (Clouded Area) Item

1.16 Work #16- Demolish Some Existing Shaft wall and renovate for expansion as Drawing no. A-003 (Clouded Area); Expansion works will be measured seperately Item

1.17 Work #17- Demolish Existing Toilet for renovation as Drawing no. A-003 (Clouded Area) Item

1.18 Work #18- Demolish Existing wall floor finishing and all ceiling as Drawing no. A-003 (Clouded Area); door, frame, ceiling, floor, and wall finishing will be measured seperately Item

1.19 Work #19-Remove existing door for new door as Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.20 Work #20-Remove existing door for new wall as Drawing no. A-003 (Clouded Area); door and frame measured seperately Item

1.21 Work #21-Remove existing Lawn and RC Curb and Keep Drainage system (Refer to civil) as Drawing no. A-003 (Clouded Area) Item

1.22 Work #22-Remove existing floor finishing and ceiling for new as Drawing no. A-003 (Clouded Area) Item

Struc works - 32 / 62


Structural Works

Structural Works


Material Labour


Rate


A.2 Excavation and Earthwork2.1 Excavating; Footings. m32.2 Filling to Excavations m32.3 Backfill; Excavated material; compacted in accordance with Engineers

requirements m32.4 Disposal of excavated material; Off-Site m32.5 Earthwork Support Item2.6 Compacted Sand; thickness 50mm. m32.7 Plate bearing test; compacted in accordance with Engineers

requirements Item2.8 Pile- [] 300x300 mm. Safety-35 ton/pile -22000mm. Long - Dowel Bar 8-

DB20x600 Long, Steel plate 12mm. thk, at connection covered with Collar 9 mm. no.

2.9 Pile cut-off no.2.10 Dynamic load test no.2.11 Remove Pile cut-off no.

A.3 Concrete Works3.1 Lean concrete; Beds; 150 ksc; thickness 50mm. m33.2 Concrete;Reinforced; 240 ksc; Foundations. m33.3 Concrete;Reinforced; 240 ksc; Columns. m33.4 Concrete;Reinforced; 240 ksc; Beams m33.5 Concrete;Reinforced; 240 ksc Slabs; thickness 200mm. m33.6 Concrete;Reinforced; 240 ksc; RC Walls m33.7 Concrete topping to slab type MS1; 115mm thick m33 8 Concrete topping to slab on high dendity polystyrene; 75mm thick

To Collection

To Collection

3.8 Concrete topping to slab on high dendity polystyrene; 75mm thick (Drawing no. 36367-ST-73) m3

A.4 Formwork4.1 Formwork; sides of Foundations. m24.2 Formwork; Columns. m24.3 Formwork; Beams m24.4 Formwork; Slabs. m24.5 Formwork; RC Walls m24.6 E.O. Column formwork to form steel beam seating as detail 2 and 3 on

drawing 36367-ST-54 no.4.7 Nail kg

A.5 Reinforcement5.1 Reinforcement bar; 6mm.SR24 kg5.2 Reinforcement bar; 9mm.SR24 kg5.3 Reinforcement bar; 12mm.SD40 kg5.4 Reinforcement bar; 16mm.SD40 kg5.5 Reinforcement bar; 20mm.SD40 kg5.6 Reinforcement bar; 25mm.SD40 kg5.7 Wire kg

A.6 Waterproofing 6.1 system m26.2 E.O. Concrete for waterproof concrete to Toilet Floor m26.3 E.O. Concrete for waterproof concrete to underground concrete floor

and wall m2

To Collection

To Collection

To Collection



Structural Works

Structural Works


Material Labour


Rate


A.7 Structural Steel Works7.1 Steel Structure (Drawing 36367-ST-33,34,75,83,89,90,91)

7.1.1 SB10- I 350x175x7x11x49.6 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg


7.1.3 SB12- C 150x75x6.5x10x18.6 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.1.4 SC10-H 200x200x8x12x49.9 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.1.5 SC11-I 150x150x7x10x31.5 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.1.6 MS1- BHP 2W-0.75mm. Composite Floor Deck m27.1.7 S1- C 200x80x7.5x11x24.6 kg/m.; complete w/surface finishes in

accordance with Engineers Specification (Surface finish to measure separately) kg

7.1.8 L 50x50x5 complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately)

7.1.9 L2 75x75x6 complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately)

7.1.10 Steel Plate -170x70x10mm.thk. ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-83 (Surface finish to measure separately) kg

To Collection

(Surface finish to measure separately) kg7.1.11 Steel Plate -200x200x16mm.thk. ; complete w/surface finishes in

accordance with Engineers Specification Drawing no. 36367-ST-83 (Surface finish to measure separately) kg

7.1.12 Steel Plate - 325x200x16mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as detail 3 Drawing no. 36367-ST-89 (Surface finish to measure separately) kg

7.1.13 Steel Plate - 230x200x16mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as detail 4a Drawing no. 36367-ST-89 (Surface finish to measure separately) kg

7.1.14 Steel Plate - 150x170x10mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as detail 5a Drawing no. 36367-ST-89 (Surface finish to measure separately) kg


7.1.16 Steel Plate - 400x250x16mm.thk. ; connection SB10 to column complete w/surface finishes in accordance with Engineers Specification as section 1 Drawing no. 36367-ST-90 (Surface finish to measure separately) kg

7.1.17 Steel Plate - 210x80x12mm.thk. ; connection SB10 to column complete w/surface finishes in accordance with Engineers Specification as section 2 Drawing no. 36367-ST-90 (Surface finish to kg

7.1.18 Steel Plate - 270x250x16mm.thk. ; connection SB11 to column complete w/surface finishes in accordance with Engineers Specification as section 3 Drawing no. 36367-ST-90 (Surface finish to measure separately) kg

7.1.19 complete w/surface finishes in accordance with Engineers Specification as section 4 Drawing no. 36367-ST-90 (Surface finish to measure separately) kg

7.1.20 complete w/surface finishes in accordance with Engineers Specification as section 4 Drawing no. 36367-ST-90 (Surface finish to measure separately) kg

7.1.21 Steel Plate - 210x175x16mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as section 6 Drawing no. 36367-ST-90 (Surface finish to measure separately) kg

7.1.22 Steel Plate - 250x250x20mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as section 6 Drawing no. 36367-ST-90 (Surface finish to measure separately) kg

7.1.23 Steel Plate - 210x140x12mm.thk.; complete w/surface finishes in accordance with Engineers Specification as section 2 Drawing no. g p g36367-ST-75 (Surface finish to measure separately) kg

7.1.24 Steel Mess, 5mm. @150 in accordance with Engineers Specification as section 1 Drawing no. 36367-ST-91 kg

7.1.25 10mm. CLEAT Plate ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-75,91 (Surface finish to measure separately) kg



Structural Works

Structural Works


Material Labour


Rate


7.1.26 12mm. CLEAT Plate ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-91 (Surface finish to measure separately) kg

7.1.27 M20 G8.8 or M20 Bolts Hilti HAS Bolts in accordance with Engineers Specification as Drawing no. 36367-ST-83,89,90,91 no.

7.1.28 M16 HIL TI HAS Bolts in accordance with Engineers Specification Drawing no. 36367-ST-89 (Surface finish to measure separately)

7.1.29 M12 HIL TI HAS Bolts in accordance with Engineers Specification Drawing no. 36367-ST-88 (Surface finish to measure separately) no.

7.1.30 8mm. Purlin CLEAT Plate ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-88 (Surface finish to measure separately) kg

7.1.31 Stiffener Plate 10mm. thk; complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-83 (Surface finish to measure separately) kg


7.1.33 Stud Dia 19mm. in accordance with Engineers Specification as Drawing no. 36367-ST-91 no.

7.1.34 Alkyd Painting to structural steel; in accordance with Engineers Specification m2

7.2 Steel Roof structure ( drawing no.35,40,85)7.2.1 TR1A,TR1 Steel roof truss complete w/surface finishes in accordance

with Engineers Specification (Surface finish to measure separately) kg7.2.2

g/ (Rating; Neoterm intumescent coating from Assist Engineering ) complete w/surface finishes in accordance with Engineers Specification (Drawing 36367-ST-35) (Surface finish to measure Specification (Drawing 36367 ST 35) (Surface finish to measure separately) kg

7.2.3 R1 I-300x150x6.5x9x30.7 kg/m complete w/surface finishes in accordance with Engineers Specification (Drawing 36367-ST-35) (Surface finish to measure separately) kg

7.2.4 R2 C- 150x75x6.5x10x18.6 kg/m complete w/surface finishes in accordance with Engineers Specification (Drawing 36367-ST-35) (Surface finish to measure separately) kg

7.2.5 SB1 CHS- Dia114.3x4.5x12.20 kg/m complete w/surface finishes in accordance with Engineers Specification (Drawing 36367-ST-35) (Surface finish to measure separately) kg

7.2.6 SB2 C- 150x75x6.5x10x18.6 kg/m complete w/surface finishes in accordance with Engineers Specification (Drawing 36367-ST-35) (Surface finish to measure separately) kg

7.2.7 SB3 I-125x125x6.5x9x23.8 kg/m complete w/surface finishes in accordance with Engineers Specification (Drawing 36367-ST-35) (Surface finish to measure separately) kg

7.2.8 XB1-Dia 25 ROD Bracing+Turn Buckle (Drawing 36367-ST-35) kg7.2.9 FB L-50x50x5 FLY Bracing (Drawing 36367-ST-35,88) kg

7.2.10 P1 Z-150/15 High Strength Galvanized "Z" Purlins - Purlins Lappped 900mm. At 1700 mm. CRS.1 Row Bridging per Bay (Drawing 36367-ST-35) kg

7.2.11 G1 Z-150/15 High Strength Galvanized "Z" Girts - Purlins Lappped 900mm. At 2000 mm. CRS.2 Row Bridging per Bay (Drawing 36367-ST-35) kg

7.2.12 FR1- no detail (Drawing no. 36367-ST-40 Section at Grid line D) complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.2.13 FB- detail B Drawing no. 36367-ST-85 complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.2.14 C 200x80x7.5x11x2.4x24.6kg/m complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-85 (Surface finish to measure separately) kg

7.2.15 C 150x75x6.5x10x18.6kg/m complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-85 (Surface finish to measure separately) kg

7.2.16 L 75x75x6 complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-85 (Surface finish to measure separately) kg

7.2.17 10mm. Stiffener Plate in accordance with Engineers Specification g pDrawing no. 36367-ST-85 (Surface finish to measure separately) kg

7.2.18 M16 HIL TI HAS Bolts in accordance with Engineers Specification Drawing no. 36367-ST-85 (Surface finish to measure separately) no.




Structural Works

Structural Works


Material Labour


Rate


7.3 Steel structure at head column (drawing 53,54,84,86,87)7.3.1 M24 or M20 Bolts G8.8 in accordance with Engineers Specification

(Drawing no. 36367-ST-53,54,84,86,87) no.7.3.2 M20 Bolts *Lock Nut (Cast-in concrete) in accordance with Engineers

Specification (Drawing no. 36367-ST-84) no.7.3.3 M24 Bolts *Lock Nut (Cast-in concrete) in accordance with Engineers

Specification (Drawing no. 36367-ST-86) no.7.3.4 L 65x65x6mm. Angle (Drawing no. 36367-ST-53,54,86,87) (Surface

finish to measure separately) kg7.3.5 L 65x65x6mm. Angle 250 Long Cast-in Concrete (Drawing no. 36367-

ST-84) kg7.3.6 L 65x65x6mm. Angle 350 Long Cast-in Concrete (Drawing no. 36367-

ST-84) kg7.3.7 C 200x80x7.5x11x2.4x24.6kg/m complete w/surface finishes in


7.3.8 C 150x75x6.5x10x18.6kg/m complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-87 (Surface finish to measure separately) kg

7.3.9 L 75x75x6mm. Angle (Drawing no. 36367-ST-87) (Surface finish to measure separately) kg


7.3.11 Steel Plate - 300x300x20mm.thk. ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-86 (Surface finish to measure separately) kg

7 3 12 Steel Plate - 350x300x20mm thk ; complete w/surface finishes in 7.3.12 Steel Plate - 350x300x20mm.thk. ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-84,86 (Surface finish to measure separately) kg

7.3.13 10mm. GUSSET Plate ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-84,86 (Surface finish to measure separately) kg


7.3.15 12mm. Stiffener Plate in accordance with Engineers Specification Drawing no. 36367-ST-87 (Surface finish to measure separately) kg





7.4 Typical splice (Drawing 88)7.4.1 Steel Plate - 330x150x16mm.thk. ; complete w/surface finishes in




7.4.4 M20 Bolts in accordance with Engineers Specification (Drawing no. 36367-ST-88) no.


7.5 Turnbuckle (Drawing 88)7.5.1 Turnbuckle Type TB-S/S with stubs or Equiv. in accordance with

Engineers Specification (Drawing no. 36367-ST-88) no.7.5.2 5mm. CAPPING Plate ; complete w/surface finishes in accordance with

Engineers Specification Drawing no. 36367-ST-88 (Surface finish to g p g (measure separately) kg




Structural Works

Structural Works


Material Labour


Rate


7.5.4 Grind Bevel 8 mm. All round in accordance with Engineers Specification (Drawing no. 36367-ST-88) (Surface finish to measure separately) no.


7.6 Stair Steel ( Drawing no. 36367-ST-77-81 )7.6.1 SB10- I 350x175x7x11x49.6 kg/m.; complete w/surface finishes in

accordance with Engineers Specification (Surface finish to measure separately) kg


7.6.3 SB12- C 150x75x6.5x10x18.6 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.6.4 SC10-H 200x200x8x12x49.9 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.6.5 SC11-I 150x150x7x10x31.5 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.6.6 S1- C 200x80x7.5x11x24.6 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

7.6.7 M24 or M20 Bolts G8.8 in accordance with Engineers Specification as Drawing no. 36367-ST-81 no.

7.6.8 40 Mpa.Non-shink grout ; 25mm. thick in accordance with Engineers Specification Drawing no 36367-ST-81 m2Specification Drawing no. 36367 ST 81 m2

7.6.9 L1 50x50x5 complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-77-83 (Surface finish to measure separately) kg


7.6.11 10mm. CAP Plate ; complete w/surface finishes in accordance with Engineers Specification Drawing no. 36367-ST-81 (Surface finish to measure separately) kg

7.6.12 10mm. GUSSET Plate ; complete w/surface finishes in accordance with Engineers Specification as detail 3a Drawing no. 36367-ST-81 (Surface finish to measure separately) kg

7.6.13 Steel Plate - 400x200x16mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-81 (Surface finish to measure separately) kg








7.6.21 16mm Plate thk. ; complete w/surface finishes in accordance with Engineers Specification as details 2b,7 Drawing no. 36367-ST-81 (Surface finish to measure separately) kg

7.6.22 Steel Plate - 140x80x16mm.thk. ; complete w/surface finishes in ; p /accordance with Engineers Specification as Drawing no. 36367-ST-81 (Surface finish to measure separately) kg




Structural Works

Structural Works


Material Labour


Rate



7.7 Roof Canopy Gutter Steel as Drawing no. 36367-ST-95&967.7.1 WF-250x125x6x9x259.6 kg/m complete w/surface finishes in

accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.2 C-150x75x6.5x10x18.6 kg/m complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.3 C-100x50x20x3.2x6.7 kg/m complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.4 C-100x50x5x7.5x9.36 kg/m complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.5 [] -50x50x3.2mm. complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.6 M12 Bolts in accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.7 10mm Plate complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.8 12mm Plate complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-ST-95&96 (Surface finish to measure separately) kg

7.7.9 12mm. CLEAT Plate ; complete w/surface finishes in accordance with Engineers Specification Drawing no 36367-ST-95&96 (Surface finish to Engineers Specification Drawing no. 36367 ST 95&96 (Surface finish to measure separately) kg


A.8 Miscellaneous8.1 40 Mpa.Non-shink grout ; 25mm. thick in accordance with Engineers

Specification; Drawing no. 36367-ST-86 & 87 m28.2 Floor Expansion Joint between existing slab and new slab/ Stainless

Steel expansion joint cover (Type CS-10 25mm. Of LATHAM)+Spring Steel Centring Bar+3mm. Deck Plate+Water Gutter type VWS VINYL+CA6 Concrete Anchor (optical) at 500 mm Centres as drawing m

8.3 Polythene DPC 0.25 mm thk. m28.4 Corbel as detail 6b drawing 36367-ST-87 no.8.5 Concrete blockwall 140mm solid filled reinforcing DB12 800 c/cs b/

Epoxy grout starters using Sikadur/ Thioflex 600 as drawing 36367-ST-76 m2

8.6 High Density Polystyrene (Drawing no. 36367-ST-73) m28.7 Epoxy Groutd Starter (Drawing no. 36367-ST-73,74) no.8.8 Curb; 125 mm. thk (Drawing no. 36367-ST-73) m8.9

A.9 Other Items

To Collection

To Collection



Structural Works

Structural Works


Material Labour


Rate


CollectionA Structural Works

A.1 Demolition Works.

A.2 Excavation and Earthwork

A.3 Concrete Works

A.4 Formwork

A.5 Reinforcement

A.6 Waterproofing

A.7 Structural Steel Works

A.8 Miscellaneous

A.9 Other Items

Total Structural Works to Summary




BILLS OF QUANTITIES

SECTION 3 – ARCHITECTURAL WORKS


Architectural Works

Architectural Works


Material LabourB Architectural Works

B.1 Internal Walls and Partitions1.1 Blockworks; 90 mm.thk. m21.2 Blockworks; 140 mm.thk. m21.3 Concrete lintel; 90mm. thick brickwork & blockwork wall m1.4 Concrete lintel; 140mm. thick brickwork & blockwork wall m

B.2 Floor Finishes2.1 F1- Paving Block With Stone Curb (Match to Existing) m22.2 F2 - 450x450mm. Non-Slip Ceramic Floor Tile Finish; including screed m22.3 F3 - 200x200mm. Non-Slip Ceramic Floor Tile Finish; including screed m22.4 F4 - Epoxy 2mm. Thk. PRODUCT SIKAFLOOR - 261 or Equivalent m22.5 F5 - Non-Metalic Floor Hardener Product SIKA Floor 2 SYNTOP (5kg/m)

with SIKA Floor Proseal 22 coated m22.6 F6 - Steel Trowelling m22.7 F7 - Exposed m22.8 Skirting - Black VINYL Skirting 100 mm. thk. Height m2.9 Skirting - Black VINYL Skirting 150 mm. thk. Height m

2.10 Wooden Skirting 100mm. Height m2.11 Waterproofing to Roof Floor (Remark: Radcon Formula #7) m2

Remark : Waterproofing to Toilet Floor shall be RC with Waterproofing admixture)

2.12 Planter Area m22.13 Skirting-150mm. Height epoxy paint as drawing A-011 m

Project Name: Kerry Ingredients Facility Expansion Document Reference: 077/GES/BoQ/SUMMARY

Rate

To Collection

To Collection

B.3 Internal Wall Finishes3.1 W1- Sandcement Render to concrete block wall 90mm. thk ; painted

(painting measured seperately ) (Remark: Jotun, ICI or TOA) m23.2 W2 - Glazed Ceramic Tile 200x200 mm. to concrete block 90 mm. thk ;

Full Height including screed. (Ceramic Tiles PC Sum 300baht/m2) m23.3 W3- Sandcement Render to concrete block wall 140 mm. thk ; painted


Full Height including screed. (Ceramic Tiles PC Sum 300baht/m2) m23.5 W5 - 2KENZAI Tile finish to concrete block 140 mm. thk (Match to

Existing) m23.6 W6 - 50mm. Thk Clean Room Panel with Aluminium Joint Sealant;

Polyurethane insulation panel (Food Grade Standard Type), the finishing on the panels is free of Heavy and corrosive metals, including materials with cancerous or other toxic agents. Panels are rust free and hygienic in accordance with regulations of USDA (United States Department of Agriculture). All panels surface must feature clean and smooth surface and are free imperfections such as dents which can become bacteria traps. This shall be product of WALLTECH or Equivalent. m2

3.7 W7 - 100mm. Thk Clean Room Panel with Aluminium Joint Sealant; Polyurethane insulation panel (Food Grade Standard Type), the finishing on the panels is free of Heavy and corrosive metals, including materials with cancerous or other toxic agents. Panels are rust free and hygienic in accordance with regulations of USDA (United States Department of Agriculture). All panels surface must feature clean and smooth surface and are free imperfections such as dents which can become bacteria traps. This shall be product of WALLTECH or Equivalent. m2

3.8 W8 - Existing Wall with Repaints (Remark: Jotun, ICI or TOA) m23.9 W9 - 15mm. Thk. Gypsum Board on metal stud with plastered and

painted (Plastered&painting measured seperately ) m23.10 W10 - Glazed Ceramic Tile 200x200 mm. to existing wall ; Full Height

including screed. (Ceramic Tiles PC Sum 300baht/m2) m23.11 W11 - Timber Partition with decorative finishing match to existing m23.12 Waterproofing to Wall (Remark: Radcon Formula #7) m23.13 Plumb and level scratch render coat to receive ceramic & stone finish;

minimum 12mm. Thick. m23.14 15mm. Plaster to wall m2

To Collection

3.15 Painting to wall m2

Arch works - 40/62


Architectural Works

Architectural Works


Material Labour


Rate

B.4 Ceiling Finishes4.1 C1 - 600x1200x15 mm.thk. Acoustic mineral Tile on aluminum T-Bar m24.2 C2 - 600x600x15 mm.thk. Acoustic mineral Tile on aluminum T-Bar m24.3 C3 - 600x600x9 mm.thk. Painted moisture resistance gypsum board on

aluminum T-Bar (painting measured seperately ) m24.4 C4 - 12mm. Thk. Gypsum Board on Galvanized steel stud with plastered

and painted (painting measured seperately ) m24.5 C5 - 50mm. Thk. Clean Room Panel with Aluminium Joint Sealant m24.6 C6 - 100mm. Thk. Clean Room Panel with Aluminium Joint Sealant m24.7 C7 - Exposed (Open Ceiling) m24.8 Timber Ceiling Moulding as drawing no.A-030 no.4.9 Painting to ceiling m2

B.5 Roof finishes

5.1 Colorbond Metal Roofing Sheet Kliplok Hi-Ten 0.48 BMT. m25.1.1 Chicken mesh #25x25 No.18 as drawing A-032 m25.1.2 Screw [email protected] drawing A-032 no.5.1.3 CTEKS 10-16x16@500mm as drawing A-032 no.5.1.4 GL-30 white Metallized Polypropylene film.as drawing A-032 m25.1.5 CSR Bradford RockWool fibertex B-40 density 40kg/m3 50mm.

THK.insulation as drawing A-032 m2

To Collection

To Collection

5.1.6 Primered Sub girt length 1200mm. 1.6mm THK as drawing A-032 kg5.1.7 Butt joint as drawing A-032 no.5.2 Colorbond Metal Roofing Sheet Kliplok Hi-Ten 0.48 BMT. With

skylight and insulation system as drawing A-032

m25.2.1 Screw No. CMSP 14-14x22 HWFS. as drawing A-032 no.5.2.2 Clip KL-70 as drawing A-032 no.5.2.3 Weather seal as drawing A-032 no.5.2.4 Kliplok HI-Ten 700 Translucent sheet as drawing A-032 m25.2.5 Closed end flashing (Girth 235mm. Length 3100mm.) as drawing A-032 m5.3 Ampelite Transucent Roofing Model Standard Opal 700mm. Width as

drawing A-032 m5.4 3mm. thk Galvanized steel gutter U - size 60cmx72cm as detail 1

drawing A-011 m5.5 3mm. thk Galvanized steel gutter U - size 40cmx55cm as detail 4

drawing A-011 m5.6 Roof Sheet-no detail as drawing A-007 m25.7 Parking Roof as drawing A-035

5.7.1 Colour Bond convex spring curved metal roofing sheet (BMP. Custom ORB Type) m2

5.7.2 Steel purlin 50x50mm. with painted kg5.7.3 50x100mm. Black steel pipe with painted; painting will be measured

seperately kg5.7.4 100x100mm. Black steel pipe with painted; painting will be measured

seperately kg5.8 Fascia Capping as drawing no A-011 m5.9 Soffit Trim Flashing as drawing no A-011 m

5.10 Expansion Flasing as drawing no A-011 m5.11 L50x50x4mm. Thk Galvanized Steel as drawing no A-011 m5.12 Cap Flashing as drawing no A-011 m5.13 Base Flashing as drawing no A-011 m5.14 Cast in L50x50x4mm. Thk. Steel Angle Bar with Paint (Yellow/ Black) as

drawing no A-011 kg5.15 Alkyd Painting to structural steel; in accordance with Engineers

Specification m2

Arch works - 41/62


Architectural Works

Architectural Works


Material Labour


Rate

B.6 Elevation works 6.1 W1- Sandcement Render to concrete block wall 90mm. thk ; painted


Full Height including screed. (Ceramic Tiles PC Sum 300baht/m2) m26.3 W3- Sandcement Render to concrete block wall 140 mm. thk ; painted


Full Height including screed. (Ceramic Tiles PC Sum 300baht/m2) m26.5 W5 - 2KENZAI Tile finish to concrete block 140 mm. thk ; including

screed. (Match to Existing) m26.6 W6 - 50mm. Thk Clean Room Panel with Aluminium Joint

SealantPolyurethane insulation panel (Food Grade Standard Type), the finishing on the panels is free of Heavy and corrosive metals, including materials with cancerous or other toxic agents. Panels are rust free and hygienic in accordance with regulations of USDA (United States Department of Agriculture). All panels surface must feature clean and smooth surface and are free imperfections such as dents which can become bacteria traps. This shall be product of WALLTECH or Equivalent. m2

6.7 W7 - 100mm. Thk Clean Room Panel with Aluminium Joint SealantPolyurethane insulation panel (Food Grade Standard Type), the finishing on the panels is free of Heavy and corrosive metals, including materials with cancerous or other toxic agents. Panels are rust free and hygienic in accordance with regulations of USDA (United States Department of Agriculture). All panels surface must feature clean and smooth surface and are free imperfections such as dents which can become bacteria traps. This shall be product of WALLTECH or Equivalent. m2

6 8 W8 E i i W ll i h R i (R k J ICI TOA) 2

To Collection

6.8 W8 - Existing Wall with Repaints (Remark: Jotun, ICI or TOA) m26.9 W9 - 15mm. Thk. Gypsum Board on metal stud with plastered and

painted (Plastered&painting measured seperately ) m26.10 W10 - Glazed Ceramic Tile 200x200 mm. to existing wall ; Full Height

including screed. (Ceramic Tiles PC Sum 300baht/m2) m26.11 W11 - Timber Partition with decorative finishing match to existing m26.12 Waterproofing to Wall (Remark: Radcon Formula #7) m26.13 Plumb and level scratch render coat to receive ceramic & stone finish;

minimum 12mm. Thick. m26.14 15mm. Plaster to wall m26.15 Painting to wall m2

B.7 Staircases Finishes 7.1 Stair1 - Structure steel-Checker Plate 6mm. Thk, 25 risers @180 ;

250mm.widex1400mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg

7.2 Stair1 - Structure steel-Checker Plate 6mm. Thk, 23 treads @250 ; 250mm.widex1400mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg

7.3 Stair1 - Structure steel-Checker Plate 6mm. Thk, 1 Landing 1400x1400 mm.; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg

7.4 Stair2 - Structure steel-Checker Plate 6mm. Thk, 40 risers @187.5 ; 250mm.widex1000mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg


7.6 Stair2 - Structure steel-Checker Plate 6mm. Thk, 1 Landing 1000x1000 mm.; complete w/surface finishes in accordance with Engineers

To Collection

Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg

Arch works - 42/62


Architectural Works

Architectural Works


Material Labour


Rate

7.7 Stair3 - Structure steel-Checker Plate 6mm. Thk, 19 risers @180 ; 250mm.widex1300mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg


7.9 Stair3 - Structure steel-Checker Plate 6mm. Thk, 1 Landing 1300x1300 mm.; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg




7.13 Stair5 - Structure steel-Checker Plate 6mm. Thk, 18 treads @250 ; 250mm.widex1400mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to

t l ) kmeasure separately) kg7.14 Stair6 - Structure steel-Checker Plate 6mm. Thk, 19 risers @184.2 ;

225mm.widex1000mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-013-016 (Surface finish to measure separately) kg




7.18 Staircase 7 - Structure steel-Checker Plate 6mm. Thk, 6 risers @166.7 ; 250mm.widex1400mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-015 (Surface finish to measure separately) kg

7.19 Staircase7 - Structure steel-Checker Plate 6mm. Thk, 5 treads @250 ; 225mm.widex1400mm. Long; complete w/surface finishes in accordance with Engineers Specification as Drawing no. A-015 (Surface finish to measure separately) kg

7.20 Painting to structural steel; in accordance with Engineers Specification m2(Remark: All Check Plates (Step) are supported by L1 in Structure Works A.7.6.9

Arch works - 43/62


Architectural Works

Architectural Works


Material Labour


Rate

B.8 Doors8 Including Linings, Frames, Glazing and Painting; Including Door Hardware

8.1 D1- Single swing door/Gasketed steel door panel 45mm. Thk. With 6mm. Thk. Clear Acrylic panel/steel door frame/Clear Glass & specification - overall size 900 x 2050mm/ Lock: IR Mortise Locks M70P 03B 630 (ANSI-F05 A156.13), Door closer: LCN 1460 Regular Arm ALU, Door Stop: SCL NO.432-5mm. SCP. as detail drawing no.A-020 no.

8.2 D2- Double swing door/Gasketed steel door panel 45mm. Thk. With 6mm. Thk. Clear Acrylic panel/steel door frame/Clear Glass & specification - overall size 1800 x 2000mm/ Lock: IR Mortise Locks M70P 03B 630 (ANSI-F05 A156.13), Dummy Trim: IR Full Dummy Trim M172 03B 630, Door closer: LCN 1460 Regular Arm ALU, Bolt: SCL DB008A 12" CP. as detail drawing no.A-020 no.

8.3 D3- Single swing door/Gasketed steel door panel 45mm. Thk. With 6mm. Thk. Clear Acrylic panel/steel door frame/Clear Glass & specification - overall size 900 x 2050mm/ Lock: IR Mortise Locks M70P 03B 630 (ANSI-F05 A156.13), Door closer: LCN 1460 Regular Arm ALU, Door Stop: SCL NO.432-5mm. SCP. as detail drawing no.A-020 no.

8.4 D4- Single swing door/8mm.thk Laminated Clear Glass on 50x125mm. Gasketed Aluminium Frame/- overall size 900 x 2050mm/ Push&Pull: Stainless Steel Handle. as detail drawing no.A-020 no.

8.5 D5- Single swing door/Plywood Facing panel 38mm. thk with 6mm. thk. Diffuse Glass Panel with wood louvers under/Hard wood frame/Hinge: SCL 4'x3"x2.5mm. BB SS FT, Lock: SCHLAGE BC162P 626, Door Closer: LCN 1370 Hold-open Arm AlU, Push&Pull: C-Chape No.3PH8SSPW - overall size 1000 x 2050mm/as detail drawing no.A-020 no.

8.6 D6- Single swing door/Gasketed steel door panel 45mm. Thk. With 6mm. Thk R fl i i d l l/ l d f /Cl Gl &

To Collection

Thk. Reflective tinted glass panel/steel door frame/Clear Glass & specification - overall size 900 x 2050mm/ Lock: IR Mortise Locks M70P 03B 630 (ANSI-F05 A156.13), Door closer: LCN 1460 Regular Arm ALU, Door Stop: SCL NO.432-5mm. SCP. as detail drawing no.A-020 no.

8.7 D7- Emergency Exit door/Steel Door Fram/Fireproof Steel door panel & specification - overall size 1000 x 2050mm Exit device: VON DUPRIN 22K-F SP28, Door Closer: LCN 1461 Regular Arm ALU. as detail drawing no.A-020 no.

8.8 D8- Single swing door/PVC door panel 40mm. Thk. With louver /Hard wood frame- overall size 900 x 2050mm/ Hinge: SCL 4"x3"x2.5mm. BB SS FT,Lock: SCHLAGE A10S Plymouth 630 (ANSI-F75 A156.2) on 100x200x1.5mm. Thk Stainless steel plate as detail drawing no.A-020 no.

8.9 D9- Single swing door/GASKETED Clean Room door panel 40mm. Thk. With 6mm. Thk Clean Acrylicpanel /Aluminium frame- overall size 1200 x 2150m as detail drawing no.A-020 no.

8.10 D10-Opening wall with PVC. Curtain 200mm. Width 3mm.thk FULL LAPPING PVC. Strips (Yellow Transparent PVC.)- overall size 1200 x 1570m as detail drawing no.A-020 no.

8.11 D11- Single swing door/Plywood facing door panel 38mm. Thk. With wood louver /Hard wood frame- overall size 900 x 2050mm/ Hinge: SCL 4"x3"x2.5mm. BB SS FT,Lock: SCHLAGE A10S Plymouth 630 (ANSI-F75 A156.2) on 100x200x1.5mm. Thk Stainless steel plate as detail drawing no.A-020 no.

8.12 D12- Single swing door/8mm.thk Laminated Clear Glass on 50x125mm. Gasketed Aluminium Frame/ 6mm. Thk fixed glass on top/- overall size 900 x 2600mm/ Push&Pull: Stainless Steel Handle. as detail drawing no.A-020 no.

8.14 D13- Sliding door/Transparent Door Leaf 1.0mm. Transparent PVC. warning stripes 0.8mm. Coloured Polyester with anti drop-drown device and safety edge/stainless steel insulation door frame/Operation: Control unit/ Colour: Yellow (RAL 1023) - overall size 2000 x 2500mm as detail drawing no.A-021 Note: shall be high speed product of CRAWFORD E500 Hygiene or Equivalent no.

8.15 D14- Automatic Roll up door/Electro Galvanized steel sheet 0.7mm. Thk. With EPOXY Coated finish/ PVC. Curtain 200mm. Width 3mm.thk FULL LAPPING PVC. Strips (Yellow Transparent PVC.)/Operate: motor - overall size 3000 x 3600mm as detail drawing no.A-021 Note: shall be insulated industrial door product of CRAWFORD 342 overhead sectional door or Equivalent no.

8.16 D15- Single air tightness and insulated overhaed ssectional door. 42mm. Thk Sandwich panel with acrylic vision panels/ Hardware to be Thk. Sandwich panel with acrylic vision panels/ Hardware to be confirmed on site by manufacturer - overall size 2500 x 3000mm as detail drawing no.A-021 no.

8.17 D16- Single sliding door/6mm.thk Clear Arcylic Glass on 50x125mm. Gasketed Aluminium Frame/- overall size 1000 x 2000mm/ Full set of bliding hardware set, standard of manufacturer as detail drawing no.A- no.

Arch works - 44/62


Architectural Works

Architectural Works


Material Labour


Rate

8.18 D17- Single sliding door/6mm.thk Clear Arcylic Glass on 50x125mm. Gasketed Aluminium Frame/- overall size 900 x 2000mm/ Full set of bliding hardware set, standard of manufacturer as detail drawing no.A- no.

8.19 D18- Sliding door/Transparent Door Leaf 1.0mm. Transparent PVC. warning stripes 0.8mm. Coloured Polyester with anti drop-drown device and safety edge/stainless steel insulation door frame/Operation: Control unit/ Colour: Yellow (RAL 1023) - overall size 2000 x 2500mm as detail drawing no.A-021 Note: shall be high speed product of CRAWFORD E500 Hygiene or Equivalent

8.20 Swing Door/ Dia-50mm. Stainless Steel Door with stainless steel hinges and flush bolts/ overall size 900x2000mm/ Full set of bliding hardware set, standard of manufacturer as detail drawing no.A-006 no.

B.9 WindowsIncluding Linings, Frames, Glazing and Painting

9.1 W1 - Aluminium window / 0.6 mm.thk.Clear Acrylic / Natural Aluminium frame/ Powdercoat finish & specification - overall size 2400 x 1050mm as detail drawing no.A-022 no.

9.2 W2 - Aluminium window / 0.6 mm.thk.Clear Acrylic / Natural Aluminium frame/ Powdercoat finish & specification - overall size 2100 x 1050mm as detail drawing no.A-022 no.

9.3g

sandblasted tempered glass below / Natural Aluminium frame/ Powdercoat finish & specification - overall size 1600 x 2500mm as detail drawing no.A-022 no.

9.4g

sandblasted tempered glass below / Natural Aluminium frame/ Powdercoat finish & specification - overall size 850 x 2500mm as detail drawing no.A-022 no.g

To Collection

9.5 sandblasted tempered glass below / Natural Aluminium frame/ Powdercoat finish & specification - overall size 500 x 2500mm as detail drawing no.A-022 no.

9.6 W6- Aluminium window / 0.6 mm.thk.clear glass/0.6mm. Thk sandblasted tempered glass below / Natural Aluminium frame/ Powdercoat finish & specification - overall size 1400 x 1700mm and 1000 x 500mm above timber door as detail drawing no.A-022 no.

9.7g

sandblasted tempered glass below / Natural Aluminium frame/ Powdercoat finish & specification - overall size 1150 x 2500mm as detail drawing no.A-022 no.

9.8 W8- Aluminium window / 0.6 mm.thk.clear glass/ Natural Aluminium frame/ Powdercoat finish & specification - overall size 3000 x 1750mm as detail drawing no.A-022 no.






Arch works - 45/62


Architectural Works

Architectural Works


Material Labour


Rate

B.10 Mill Works 10.1 Wooden Lighting Box with Spray Painted ; 50x50 steel angle frame with

rust proof painted and 25x25mm wooden frame/6mm thk. Plywood on top/10mm.thk plywood w/ spray paint at the front/ Teak wood 10x10mm. And 3mm. Thk figured glass (Mistlite type) holding with Teak wood frame at bottom m

10.2 Lavatory Concrete counter 600w x 2400l c/w 20mm. Thk. Granite top surface #Male Toilet no.

10.3 Lavatory Concrete counter 600w x 1900l c/w 20mm. Thk. Granite top surface #Toilet at 1st Floor no.

10.4 Lavatory Concrete counter 600w x 1900l c/w 20mm. Thk. Granite top surface #Toilet at 1st Floor no.

10.5 Lavatory Concrete counter 600w x 3300l c/w 20mm. Thk. Granite top surface #Female Toilet no.

10.6 Lavatory Concrete counter 600w x 3600l c/w 20mm. Thk. Granite top surface #Toilet2 no.

10.7 Lavatory Concrete counter 600w x 1600l c/w 20mm. Thk. Granite top surface # Toilet3 no.

10.8 Lavatory Concrete counter 600w x 1500l c/w 20mm. Thk. Granite top surface # Changing Room at 2nd Floor no.

10.9 Male Toilet mirror 2400w x 1000ht on suspended 6mm thk Chamfer around mirror panels glued to waterproof plywood 10 mm. thk. Waterproof painted on black side with 100% silicone sealant around no.

10.10 Toilet at 1st floor mirror 1900w x 1000ht on suspended 6mm thk Chamfer around mirror panels glued to waterproof plywood 10 mm. thk. Waterproof painted on black side with 100% silicone sealant around no.

10.11 Toilet at 1st floor mirror 1900w x 1000ht on suspended 6mm thk Ch f d i l l d t t f l d 10 thk

To Collection

Chamfer around mirror panels glued to waterproof plywood 10 mm. thk. Waterproof painted on black side with 100% silicone sealant around no.

10.12 Female Toilet mirror 3300w x 1000ht on suspended 6mm thk Chamfer around mirror panels glued to waterproof plywood 10 mm. thk. Waterproof painted on black side with 100% silicone sealant around no.

10.13 Toilet 2 mirror 3600w x 1000ht on suspended 6mm thk Chamfer around mirror panels glued to waterproof plywood 10 mm. thk. Waterproof painted on black side with 100% silicone sealant around no.

10.14 Toilet 3 mirror 1600w x 1000ht on suspended 6mm thk Chamfer around mirror panels glued to waterproof plywood 10 mm. thk. Waterproof painted on black side with 100% silicone sealant around no.

10.15 Changing Room at 2nd floor mirror 1500w x 1000ht on suspended 6mm thk Chamfer around mirror panels glued to waterproof plywood 10 mm. thk. Waterproof painted on black side with 100% silicone sealant around no.

Arch works - 46/62


Architectural Works

Architectural Works


Material Labour


Rate

B.11 Sanitary Ware11.1 Toilet- Water closet "sydney FV.(P)" COTTO C-1330 White+ Flush Valve

Model TS 404 ENS. no.11.2 Toilet- Water closet "Flush Valve Squat" COTTO C-202 SQUAT 1 FV. White

+ Flush Valve Model TS 404 ENS. no.11.3 Toilet - Lavatory "Marlow" COTTO C-017 White no.11.4 Toilet - Lavatory Faucet "Self Closed" COTTO CT-161 Chrome no.11.5 Toilet - Plug&Chain waste COTTO CT-670 Chrome no.11.6 Toilet - Bottle Trap for Lavatory COTTO CT-680 AX Chrome no.11.7 Toilet - Inlet Hose COTTO S-283 CHROME no.11.8 Toilet - Soap Valve (Spindel Valve) COTTO CT-190C6 Chrome no.11.9 Toilet - Urinal "Santana" COTTO C-303 White + Flush Valve Model TS 401

EDUF no.11.10 Shower - Fixed Shower Head COTTO S-11 Chrome no.11.11 Shower - Tap for shower COTTO CT-599-A Chrome no.11.12 Shower - Soap Holder C-805 White no.11.13 Janitor RM - Sink Faucet TOTO TS-112, B-14 Chrome no.11.14 Janitor RM - Floor Drain COTTO CT-644 Z3P Chrome no.11.15 Handicap's Toilet - Water Closet "SYDNEY FV.(P)" COTTO C-1300 no.11.16 Handicap's Toilet - Lavatory "DUREX" COTTO C-002 White no.11.17 Handicap's Toilet - Lavatory Faucet "long Handle" COTTO CT-164-C1

Chrome no.11.18 Handicap's Toilet - Plug&Chain waste COTTO CT-670 Chrome no.11.19 Handicap's Toilet - Bottle Trap for Lavatory COTTO CT-680 AX Chrome no.11.20 Handicap's Toilet - Inlet Hose COTTO S-283 CHROME no.11.21 Handicap's Toilet - Soap Valve (Spindel Valve) COTTO CT-190C6 Chrome no.11 22 H di ' T il t Di 40 650 G b B COTTO CT 791 St i l St l

To Collection

11.22 Handicap's Toilet - Dia 40x650 Grab Bar COTTO CT-791 Stainless Steel no.11.23 Handicap's Toilet - Dia 40x650 Grab Bar COTTO CT-790 Stainless Steel no.

B.12 Glazing Works

B.13 Miscellaneous

13.1 Concrete Curb 100mm. Height m13.2 Concrete Curb 50mm. Height in Toilet m13.3 Stainless Steel corner guard of ceremic tiles wall 50x50x3 mm. thk m13.4 Stainless Steel corner guard of ceremic tiles floor step 50x50x3 mm. thk m13.5 Silicone Sealant as drawing A-012 m13.6 Ready made Toilet Partition; Particle Board 25mm. Thk with Water

resistant type; Polyester resin finished and completely sealed at corners by KOREX or equivalent as drawing A-017 no.

13.7 Wall opening with 3 side Stainless Steel Frame and Sealant A-024 no.13.8 Stair- Steel Handrail Dia 50mm. With Painted as drawing A-013-016 m13.9 Stair- Steel Handrail Dia 40mm. With Painted as drawing A-013-016 m

13.10 Handrail- Stainless Pipe Dia 50mm. x 3mm. Stainless Steel Pipe (Protection Rail) as drawing A-012 m

13.11 Spirit House as drawing no. A-033

13.11.1 Sandwash at wall finish including screed m213.11.2 Granite at floor finish 20mm.thk. including screed m213.11.3 Granite at step finish 20mm.thk. ; rises 150mm.wide including screed m13.11.4 Granite at step finish 20mm.thk. ; treads 300mm.wide including screed m13.11.5 Flower Block 300mm wide with Gravel and Fiberglass soil matte m13.11.6 Waterproofing to cement render m213.12 Flag Pole as drawing no. A-034

13.12.1 Sandwash at Floor finish including screed m213.12.2 Pebble at Floor finish including screed m213.12.3 PVC Dia 2" Drain no.

To Collection

To Collection

13.12.4 Tepered Steel Pole- Dia-65-220 mm. m13.12.5 Planter Box; 300mm wide m13.12.6 Waterproofing to cement render m2

Arch works - 47/62


Architectural Works

Architectural Works


Material Labour


Rate

13.13 Dock Leveller Details as drawing no. A-024

13.13.1 Dock Shelter size-3200x3200mm no.13.13.2 Steel angle 80x80x10mm. (3 side) kg13.13.3 Buffer size 500 (H)x250(W)x90(D) no.13.13.4 Steel Angle kg13.13.5 Flat 50x5-140 a no.13.13.6 Guard Rail Detials as drawing no. A-024

13.13.7 Stainless Steel Pipe Dia 100mm.x4mm. Thk kg13.13.8 Stainless Steel Pipe Dia 80mm.x4mm. Thk @ 1000 mm. kg13.13.9 Stainless Steel Plate with fixing set Dia 125x125x10mm. Thk. kg13.14 Wall Expansion Joint as drawing no.A-027

13.14.1 Polysulfide sealant m.13.14.2 Joint filler installed under compression m213.14.3 Aluminium Joint m.13.14.4 Expansion Joint filler (premolder) m213.14.5 Washable sealant m.13.14.6 Al. U with silicone m.13.14.7 Al. 681 with silicone m.13.14.8 Al. bar with silicone m.13.14.9 Al. L with silicone m.

13.14.10 Al. washer dia 50 mm. type with silicone sealant m.13.14.11 Al. washer dia 75 mm. type with silicone sealant m.13.14.12 PVC. Dia 75 mm. cover al washer (colour off white) m.13.14.13 Screw no.13.14.14 Stud bolt no.13.14.15 Sling no.13.14.16 Clip no.13.14.17 Turnbuckle no.13.14.18 Nut no.

13.15 Stainless Steel curb 3 mm. thk. With washable silicone sealant as drawing no. A-028 m.

13.16 Stainless Steel corner guard - wall cap 3 mm. thk. as drawing no. A-028 m.13.17 Stainless steel grating 8mm thk. as drawing no. A-028 m.13.18 Stainless steel grating 3mm thk under Stainless steel grating. as drawing

no. A-028 m.13.19 Stainless steel screening w/ handle 1.5 mm thk. as drawing no. A-028 m.

B.14 Other Items14.1 Weep Holes @1000mm. as drawing title "Toilet details 3" no.

To Collection

Arch works - 48/62


Architectural Works

Architectural Works


Material Labour


Rate

CollectionB Architectural Works

B.1 Internal Walls and Partitions

B.2 Floor Finishes

B.3 Internal Wall Finishes

B.4 Ceiling Finishes

B.5 Roof finishes

B.6 Elevation works

B.7 Staircases Finishes

B.8 Doors

B.9 Windows

B.10 Mill Works

B.11 Sanitary Ware

B.12 Glazing Works

B.13 Miscellaneous

B.14 Other Items

Total Architectural Works to Summary

Arch works - 49/62



BILLS OF QUANTITIES

SECTION 4 – MEP WORKS

Employer: Kerry Ingredients Thailand Ltd.MEP Works

MEP Works

Item Description Qty Unit Rate Amount

Material LabourC MEP WorksC.1 Cold Water System To Collection1.1 Supply & Install GSP Pipe Class Medium dia. 65 mm. m1.2 Supply & Install GSP Pipe Class Medium dia. 50 mm. m1.3 Supply & Install GSP Pipe Class Medium dia. 40 mm. m1.4 Supply & Install GSP Pipe Class Medium dia. 32 mm. m1.5 Supply & Install GSP Pipe Class Medium dia. 25 mm. m1.6 Supply & Install GSP Pipe Class Medium dia. 20 mm. m1.7 Supply & Install GSP Pipe Class Medium dia. 15 mm. m1.8 Supply & Install Ball Valve dia. 15 mm. set1.9 Supply & Install Ball Valve dia. 80 mm. set1.10 Supply & Install Stop Valve set1.11 Supply & Install Hose Bibb dia 15 mm. set1.12 Fitting & Accessories set

C.2 Hot Water System To Collection2.1 Supply & Install Hot Water Pipe ; dia. 32 mm. m2.2 Supply & Install Hot Water Pipe ; dia. 25 mm. m2.3 Supply & Install Hot Water Pipe ; dia. 20 mm. m2.4 Supply & Install Hot Water Pipe ; dia. 15 mm. m2.5 Supply & Install Insulation m2.6 Supply & Install Ball Valve dia. 1/2" set2.7 Supply & Install Stop Valve set2.8 Fitting & Accessories ls

Document Reference: 077/GES/MEP/BoQProject Name: Kerry Ingredients Facility Expansion

C.3 Waste Water Treatment To Collection3.1 Supply & Install PVC Pipe Class 8.5 dia. 65 mm. m3.2 Supply & Install PVC Pipe Class 8.5 dia. 50 mm. m3.3 Supply & Install PVC Pipe Class 8.5 dia. 40 mm. m3.4 Supply & Install PVC Pipe Class 8.5 dia. 32 mm. m3.5 Supply & Install PVC Pipe Class 13.5 dia. 150 mm. m3.6 Supply & Install PVC Pipe Class 13.5 dia. 100 mm. m3.7 Supply & Install PVC Pipe Class 13.5 dia. 80 mm. m3.8 Supply & Install PVC Pipe Class 13.5 dia. 65 mm. m3.9 Supply & Install PVC Pipe Class 13.5 dia. 50 mm. m3.10 Supply & Install PVC Pipe Class 13.5 dia. 40 mm. m3.11 Supply & Install PVC Pipe Class 13.5 dia. 32 mm. m3.12 Supply & Install PVC Pipe Class 13.5 dia. 25 mm. m3.13 Supply & Install HDPE Pipe PN.10 dia. 150 mm. m3.14 Supply & Install HDPE Pipe PN.10 dia. 100 mm. m3.15 Supply & Install HDPE Pipe PN.10 dia. 80 mm. m3.16 Supply & Install HDPE Pipe PN.10 dia. 65 mm. m3.17 Supply & Install HDPE Pipe PN.10 dia. 50 mm. m3.18 Supply & Install Flexible connection set3.19 Supply & Install Floor Drain dia. 15 mm set3.20 Supply & Install Floor Drain dia. 50 mm set3.21 Supply & Install Floor Clean Out dia. 65 mm set3.22 Supply & Install Floor Clean Out dia. 80 mm set3.23 Supply & Install Floor Clean Out dia. 100 mm set3.24 Supply & Install Grease Trap Tank Cap@25 litre (Instal under sink) set3.25 Fitting & Accessories ls

C.4 Water Distribution System To Collection4.1 Supply & Install new Package Booster Pump (PBP‐01,02) Cap@ 5.99 l/s, THD40

m,3.70kW., 380/3/50 (Vertical Multistage Pump c/w pessure tank 100 litre variable speed drive control) ;in accordance with M& E Engineers specification. set

4.2 Supply & Install GSP Pipe Class Medium dia. 65 mm. m4.3 Supply & Install GSP Pipe Class Medium dia. 50 mm. m4.4 Supply & Install GSP Pipe Class Medium dia. 40 mm. m4.5 Supply & Install GSP Pipe Class Medium dia. 32 mm. m4 6 Supply & Install GSP Pipe Class Medium dia 25 mm m4.6 Supply & Install GSP Pipe Class Medium dia. 25 mm. m4.7 Supply & Install GSP Pipe Class Medium dia. 20 mm. m4.8 Supply & Install GSP Pipe Class Medium dia. 15 mm. m4.9 Fitting & Accessories ls

MEP ‐ 50/62


MEP Works


Material Labour


C.5 Fire Protection System To Collection5.1 Supply & Install Fire Hose Cabinet (FHC) set5.2 Supply & Install Fire Hydrant set5.3 Supply & Install Flow Switch set5.4 Supply & Install Valve ls5.5 Supply & Install Pendent Sprinkler Head ;Recessed Type set5.6 Supply & Install Fire Protection Pipe Dia.80 mm. m5.7 Supply & Install Fire Protection Pipe Dia.60 mm. m5.8 Supply & Install Fire Protection Pipe Dia.50 mm. m5.9 Supply & Install Fire Protection Pipe Dia.40 mm. m5.10 Supply & Install Fire Protection Pipe Dia.32 mm. m5.11 Supply & Install Fire Protection Pipe Dia.25 mm. m5.12 Supply & Install ABC‐Fire Extinguisher 10 LBS set5.13 Fitting & Accessories ls

C.6 Rainwater System To Collection6.1 Supply & Install Roof Drain Dia. 80mm set6.2 Supply & Install Roof Drain Dia. 65mm set6.3 Supply & Install PVC Class 13.5 Dia.80 mm. m6.4 Supply & Install PVC Class 13.5 Dia.65 mm. m6.5 Supply & Install GSP Pipe Class Medium dia. 80 mm. m6.6 Supply & Install GSP Pipe Class Medium dia. 65 mm. m6.7 Fitting & Accessories ls

C.7 Main Power Supply System To Collection7.1 Supply & Install High voltage Pole;Installation complete with all accessories,

fittings and including earth connections in accordance with M& E Engineers specification. No.

7.2 Transformer (TR) Oil Immersed Transformer 500 KVA , Hermetical Fully Sealed 22 kV. 3 Phase 4 Wire Z=4% 50Hz. DYN 11 Solid Groung Off‐Load Tap,Change +/‐ 2x2.5% 400/230 V. On H from PEA Standard ; Installation complete with all accessories, fittings and connectiontion in accordance with M& E Engineers specification. No.

7.3 MDB Cu.Busbar 1000A. ,100% Neutral , 25%Ground ,3Phase ,4 Wire,50HZ ;Installation complete with all accessories, fittings and including earth connections in accordance with M& E Engineers specification. No.

7.4 Load Center (CHW‐01) ;Installation complete with all accessories, fittings and including earth connections in accordance with M& E Engineers specification. No.

7.5 Load Center (CHWP‐01) ;Installation complete with all accessories, fittings and including earth connections in accordance with M& E Engineers specification. No.

7.6 Load Center (LC1) ‐ 100 A.,30 CCT ;Installation complete with all accessories, fittings and including earth connections in accordance with M& E Engineers specification. No.





7.11 Load Center (LCAC1) ‐ 100 A.,24 CCT ;Installation complete with all accessories, fittings and including earth connections in accordance with M& E Engineers specification. No.

7.12 Load Center (LCAC2) ‐ 100 A.,24 CCT ;Installation complete with all accessories, fittings and including earth connections in accordance with M& E Engineers specification Nospecification. No.

7.13 Supply & Install Switch Panel with Photo cell switch (SP) No.7.14 Supply & Install Photo Cell and Switch Control No.7.15 Supply & Install Kilo watt‐hour meter No.7.16 Supply & Install Pull Box set

MEP ‐ 51/62


MEP Works


Material Labour


7.17 Supply & Install Junction Box set7.18 Supply & Install Drop out 150A. set7.19 Supply & Install Lighting Arresster (LA) set7.20 Supply & Install Bare Copper 120 Sq.mm. m.7.21 Supply & Install Cable 240 Sq.mm., XLPE 600V. to conduit m.7.22 Supply & Install Cable 70 Sq.mm., XLPE 600V. to conduit m.7.23 Supply & Install Cable 25 Sq.mm., XLPE 600V. to conduit m.7.24 Supply & Install Cable 10 Sq.mm., XLPE 600V. to conduit m.7.25 Supply & Install Cable 4 Sq.mm., XLPE 600V. to conduit m.7.26 Supply & Install Cable 150 Sq.mm., NYY to conduit m.7.27 Supply & Install Cable 70 Sq.mm., NYY to conduit m.7.28 Supply & Install Cable 25 Sq.mm., NYY to conduit m.7.29 Supply & Install Cable 16 Sq.mm., NYY to conduit m.7.30 Supply & Install Cable 10 Sq.mm., NYY to conduit m.7.31 Supply & Install Cable 6 Sq.mm., NYY to conduit m.7.32 Supply & Install Cable 4 Sq.mm., NYY to conduit m.7.33 Supply & Install Cable 25 Sq.mm., THW to conduit m.7.34 Supply & Install Cable 6 Sq.mm., THW to conduit m.7.35 Supply & Install Conduit HDPE Pipe dia.100 mm. (Under Ground‐ HV.) m.7.36 Supply & Install Conduit IMC Pipe dia.2" m.7.37 Supply & Install Conduit IMC Pipe dia.1 1/4" m.7.38 Supply & Install Conduit IMC Pipe dia.1 1/2" m.7.39 Supply & Install Conduit RSC Pipe dia.200x100 mm. Tray m.7.40 Supply & Install 2x2 Underground Duct bank ; Installation complete with all

accessories, fittings and including earth connections in accordance with M& E Engineers specification. m.

7.41 Excavate trench and install HDPE ductwork including all ancillary excavation items; (underground) m.

7.42 Fitting & Accessories ls

C.8 Power Supply System To Collection8.1 Supply & Install Duplex receptacle 15A.250V. ,w/Dust protection ; in accordance

with M&E Engineers specification set8.2 Supply & Install Duplex receptacle 15A.250V. ,w/Ground Universal Type ; in

accordance with M&E Engineers specification set8.3 Supply & Install Duplex receptacle 16A.250V. ,w/Ground Universal Type Ceiling

Mounted ; in accordance with M&E Engineers specification set8.4 Supply & Install Duplex receptacle 16A.250V. ,w/Ground Universal (Water Proof

Type) ; in accordance with M&E Engineers specification set8.5 Supply & Install Duplex receptacle 16A.250V. ,w/Ground Universal ( Pop‐Up Type

); in accordance with M&E Engineers specification set8.6 Supply & Install 2x55 w. Halogen Emergency light 2.0 Hrs.Battery Back‐Up ; in

accordance with M&E Engineers specification set8.7 Supply & Install 2x50 w. Halogen Emergency light 1.5 Hrs.Battery Back‐Up ; in

accordance with M&E Engineers specification set8.8 Supply & Install Centre Battery Back‐Up As show set8.9 Supply & Install 1 x50w. Halogen 12VDC , Angle adjustable Downlight ; in

accordance with M&E Engineers specification set8.10 Supply & Install Exit / Fire Exit sign with LED type and 2 Hrs. Battery Back‐Up ; in

accordance with M&E Engineers specification set8.11 Supply & Install Exit sign with 1.5 Hrs. Battery Back‐Up ; in accordance with M&E

Engineers specification set8.12 Supply & Install Hand Dryer ; in accordance with M&E Engineers specification set8.13 Supply & Install Insect Killer ; in accordance with M&E Engineers specification set8.14 Supply & Install Junction Box set8.15 Supply & Install Cable 6 Sq.mm., THW to conduit m8.16 Supply & Install Cable 4 Sq.mm., THW to conduit m8.17 Supply & Install Cable 2.5 Sq.mm., THW to conduit m8.18 Supply & Install Conduit PVC Pipe dia.1/2" m8.19 Supply & Install Conduit PVC Pipe dia.3/4" m8 20 Fittings and accessories ls8.20 Fittings and accessories ls

MEP ‐ 52/62


MEP Works


Material Labour


C.9 Lighting System To Collection9.1 Supply & Install D1 ‐ 1x70 w. Halogen Downlight with dimmable electronic ballast

; in accordance with M&E Engineers specification set9.2 Supply & Install D2 ‐ 1x11 w. Compact Fluorescent Downlight ; in accordance with

M&E Engineers specification set9.3 Supply & Install F1 ‐ 1x36 w. Fluorescent Bare type ; in accordance with M&E

Engineers specification set9.4 Supply & Install F1A ‐ 1x18 w. Fluorescent Bare type ; in accordance with M&E

Engineers specification set9.5 Supply & Install F2 ‐ 1x36 w. Fluorescent TL‐D Dust and moiusture impact resistant

with anti‐UV function cover,surface mounted. ; in accordance with M&E Engineers specification set

9.6 Supply & Install F2A ‐ 1x18 w. Fluorescent TL‐D Dust and moiusture impact resistant with anti‐UV function cover,surface mounted. ; in accordance with M&E Engineers specification set

9.7 Supply & Install F3 ‐ 2x36 w. Fluorescent TL‐D Dust and moiusture impact resistant with anti‐UV function cover,surface mounted. ; in accordance with M&E Engineers specification set


9.9 Supply & Install F4 ‐ 1x36 w. Fluorescent TL‐D Dust and moiusture impact resistant with anti‐UV function cover,surface mounted. ; in accordance with M&E Engineers specification set


9.11 Supply & Install F5 ‐ 2x36 w. Fluorescent TL‐D with electronic balast,mirror AL.Reflector and louver 600x1200 mm. Recess ceiling type ; in accordance with M&E Engineers specification set

9.12 Supply & Install F5A ‐ 2x18 w. Fluorescent TL‐D with electronic balast,mirror AL.Reflector and louver 600x1200 mm. Recess ceiling type ; in accordance with M&E Engineers specification set

9.13 Supply & Install 1x250 w. Metal Halide,High bay anodized aluminium reflector,Die‐cast aluminuim gear unit with glass cover to protect against the ingress of dust and moisture ; in accordance with M&E Engineers specification set

9.14 Supply & Install Flood Light 250 w. High Pressure Sodium, Aluminum Reflector and Aluminum Housing with temperated front clear glass, watherproof, protection againt water jets the degree of protection shall be IP55,IP56 or IP65 set

9.15 Supply & Install Emergency Lighting Unit, Internally equipped with battery and salf provided with two sportlight halogen bulbs of 35 w/12V., surface mounted on wall at +2.50 m. above finished floor set

9.16 Supply & Install Single Pole Switch 15A. 250VAC. ; in accordance with M&E Engineers specification set

9.17 Supply & Install Single Pole Switch 15A. 250VAC. ; in accordance with M&E Engineers specification ‐ with covered plate water proof (IP54) Type set

9.18 Supply & Install Single Pole Switch 15A. 250VAC. ; in accordance with M&E Engineers specification ‐ Explosion Proof (Class 1 Zone 2)Type set

9.19 Supply & Install Two‐Way Switch 15A. 250VAC. ; in accordance with M&E Engineers specification set

9.20 Supply & Install Group Switch Panel ; in accordance with M&E Engineers specification set

9.21 Supply & Install Remote Switch ; in accordance with M&E Engineers specification set9.22 Supply & Install Dimmable Switch 500w. ; in accordance with M&E Engineers

specification set9.23 Supply & Install Junction Box set9.24 Supply & Install Cable 4 Sq.mm., THW to conduit m9.25 Supply & Install Cable 2.5 Sq.mm., THW to conduit m9.26 Supply & Install Conduit PVC Pipe dia.1/2" m9.27 Supply & Install Conduit PVC Pipe dia.3/4" m9 28 Fitting & Accessories ls9.28 Fitting & Accessories ls

MEP ‐ 53/62


MEP Works


Material Labour


C.10 Lightning Protection System To Collection10.1 Supply & Install Air Terminal set10.2 Supply & Install Ground plate and test box set10.3 Supply & Install Cable 70 Sq.mm. THW to conduit m10.4 Supply & Install Conduit EMT. Pipe dia. 1 1/4" m10.5 Supply & Install Conduit EMT Pipe dia.1/2" m10.6 Supply & Install Ground rod 5/8"x10' copper clad set10.7 Supply & Install CU. Tape 25x3 mm. m10.8 Fitting & Accessories ls

C.11 Fire Alarm System To Collection11.1 Supply & Install Smoke Detector set11.2 Supply & Install Heat Detector set11.3 Supply & Install Pull Station Manual set11.4 Supply & Install Alarm Bell 6" set11.5 Supply & Install End of line set11.6 Supply & Install Cable 2C‐2.5 Sq.mm., FR Cable. to conduit m11.7 Supply & Install Cable 2C‐1.5 Sq.mm., FR Cable. to conduit m11.8 Supply & Install Conduit EMT Pipe dia.1/2" m11.9 Supply & Install Conduit EMT Pipe dia.3/4" m11.10 Supply & Install Fire Alarm Control Panel ‐ FCP 4 Zone set11.11 Supply & Install Graphic Annunciator Board set11.12 Fitting & Accessories ls

C.12 Telephone System To Collection12.1 Supply & Install Telephone outlet RJ 11 type set12.2 Supply & Install Telephone outlet RJ 11 Pop‐Up type set12.3 Supply & Install Telephone carbinet (TC.); in accordance with the M&E Engineers

specification. set12.4 Supply & Install Media Converter (Optic fiber to copper) No.12.5 Supply & Install MDF ; in accordance with the M&E Engineers specification. No.12.6 Supply & Install PABX ; in accordance with the M&E Engineers specification. No.12.7 Supply & Install HUB ; in accordance with the M&E Engineers specification. No.12.8 Supply & Install UTP ‐ Cat 5E m12.9 Supply & Install 4 Core ‐ 0.65 Sq.mm.(TIEV) m12.10 Supply & Install Conduit EMT Pipe dia.1/2" m12.11 Fitting & Accessories ls

C.13 MATV System To Collection13.1 Supply & Install Satterlite; in accordance with M&E Engineers specificaton. set13.2 Supply & InstallHead End; in accordance with M&E Engineers specificaton. set13.3 Supply & Install Channel Amplifier ; in accordance with M&E Engineers

specificaton. set13.4 Supply & Install Cable Management (Snake) Location ; in accordance with M&E

Engineers specificaton. set13.5 Supply & Install2‐Way Trap Off ; in accordance with M&E Engineers specificaton. set13.6 Supply & Install TV Spliter ‐ 4S ; in accordance with M&E Engineers specificaton. set13.7 Supply & Install TV Outlet set13.8 Supply & Install TV Outlet Ceiling Mounted ECL set13.9 Supply & Install Skirting Level set13.10 Supply & Install RG‐6 to conduit m13.11 Supply & Install RG‐11 to conduit m13.12 Supply & Install Conduit EMT Pipe dia.1/2" m13.13 Supply & Install Conduit EMT Pipe dia.3/4" m13 14 Fitting & Accessories ls13.14 Fitting & Accessories ls

MEP ‐ 54/62


MEP Works


Material Labour


C.14 Data System To Collection14.1 Supply & Install Data Outlet RJ 45 type set14.2 Supply & Install Data Outlet RJ 45 Pop‐Up type set14.3 Supply & Install Data Access Point Ceiling Mounted Type set14.4 Supply & Install Switch/HUB; in accordance with M&E Engineers specificaton. set14.5 Supply & Install Server; in accordance with M&E Engineers specificaton. set14.6 Supply & Install UTP ‐ Cat 5E m14.7 Supply & Install Conduit EMT Pipe dia.1/2" m14.8 Supply & Install Conduit EMT Pipe dia.3/4" m14.9 Supply & Install Wireway size.100 mm. x 100 mm. m14.10 Supply & Install HDPE ductwork for communication (underground) ; in accordance

with M&E Engineers specificaton. m14.11 Fitting & Accessories ls

C.15 Airconditioning Works ‐ VRV System To Collection15.1 Chiller (CH‐01) ; Air Cooling Dual Compressor refrigeration Circuit Cap @296

kW,85RT,Flow 10.08 l/s,380V/3Phase/50Hz ; in accordance with M&E Engineers specificaton. No.

15.2 Chiller Water Pump (CHWP‐01) Cap@ head 100 kPa, 10.08 l/s ; in accordance with M&E Engineers specificaton. No.

15.3 Chilled Water Expansion Tank 500 Litre ; in accordance with M&E Engineers specificaton. No.

15.4 Chemical Dosing POT. ; in accordance with M&E Engineers specificaton. No.15.5 Supply & Install Quick Fill set15.6 Supply & Install Automatic Bypass Valve Dia.100 mm. set15.7 Supply & Install Pressure Gauge set15.8 FCU‐01‐(01 to 16) Cap @ 38,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance

with M&E Engineers specification set15.9 FCU‐01‐(17 to 18) Cap @ 32,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance

with M&E Engineers specification set15.10 FCU‐02‐01 Cap @ 18,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance with

M&E Engineers specification set15.11 FCU‐02‐(02 to 04) Cap @ 40,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance



with M&E Engineers specification set15.14 FCU‐02‐10 Cap @ 12,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance with

M&E Engineers specification set15.15 FCU‐02‐11 Cap @ 18,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance with





M&E Engineers specification set15.20 ACU‐01‐1 Cap @ 16,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance with

M&E Engineers specification set15.21 ACU‐01‐(01 to 03) Cap @ 16,000 BTU ‐ Ceiling Mounted Duct Type ; in

accordance with M&E Engineers specification set15.22 ACU‐01‐04 Cap @ 12,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance with



M&E Engineers specification setM&E Engineers specification set15.25 ACU‐01‐07 Cap @ 18,000 BTU ‐ Ceiling Mounted Duct Type ; in accordance with

M&E Engineers specification set15.26 Supply & Install Thermostat set15.27 Supply & Install Volume Damper set

MEP ‐ 55/62


MEP Works


Material Labour


15.28 Refrigerant Liquid Pipe c/w Insulation m15.29 Refrigerant Suction Pipe c/w Insulation m15.30 Condensate Drain Pipe c/w Insulation m15.31 Supply & Install Conduit Chiller Water Pipe dia.150 mm. m15.32 Supply & Install Conduit Chiller Water Pipe dia.100 mm. m15.33 Supply & Install Conduit Chiller Water Pipe dia.80 mm. m15.34 Supply & Install Conduit Chiller Water Pipe dia.65 mm. m15.35 Supply & Install Conduit Chiller Water Pipe dia.50 mm. m15.36 Supply & Install Conduit Chiller Water Pipe dia.40 mm. m15.37 Supply & Install Conduit Chiller Water Pipe dia.32 mm. m15.38 Supply & Install Conduit Chiller Water Pipe dia.25 mm. m15.39 Supply & Install Conduit Chiller Water Pipe dia.20 mm. m15.40 Supply & Install Conduit Chiller Water Pipe dia.15 mm. m15.41 Supply & Install Service Panel set15.42 Supply & Install Fresh Air Grill ; w/Fiber Glass Insulation set15.43 Supply & Install Supply Air Grill ; w/Fiber Glass Insulation set15.44 Supply & Install Return Air Grill ; w/Fiber Glass Insulation set15.45 Supply & Install Exhuast Air Grill ; w/Fiber Glass Insulation set15.46 Supply & Install Ceiling Concealed Ducted Unit set15.47 Supply & Install Duct Work ; w/Fiber Glass Insulation m15.48 Supply & Install Flexible Connection set15.49 Supply & Install Programmable Wall Mounted Controller set15.50 Supply & Install Control Cabling item15.51 Supply & Install Cable 4 Sq.mm., THW to conduit m15.52 Supply & Install Cable 2.5 Sq.mm., THW to conduit m15.53 Supply & Install Conduit PVC Pipe dia.1/2" m15.54 Supply & Install Conduit PVC Pipe dia.3/4" m15.55 Fitting & Accessories ls

C.16 Miscellaneous To Collection

C.17 Other Items To Collection

MEP ‐ 56/62


MEP Works


Material Labour


CollectionC MEP WorksC.1 Cold Water System

C.2 Hot Water System

C.3 Waste Water Treatment

C.4 Water Distribution System

C.5 Fire Protection System

C.6 Rainwater System

C.7 Main Power Supply System

C.8 Power Supply System

C.9 Lighting System

C.10 Lightning Protection System

C.11 Fire Alarm System

C.12 Telephone System

C.13 MATV System

C.14 Data System

C.15 Airconditioning Works ‐ VRV System

C.16 Miscellaneous

C.17 Other Items

To Summary

MEP ‐ 57/62



BILLS OF QUANTITIES

SECTION 5 –INFRASTRUCTURE & EXTERNAL WORKS

Employer: Kerry Ingredients Thailand Ltd. Section 5Infrastructure & External Works

Infrastructure & External Works

Item Description Qty Unit Rate AmountMaterial Labour

D External & Civil Engineering WorksD.1 General To Collection1.1 Site clearance m2

D.2 Road Construction To Collection2.1 Excavation m32.2 Filling with selected excavated material in accordance with the

Engineer 's specification. m32.3 Filling with laterite in accordance with the Engineer's specification. m32.4 Existing soil CBR >=5% to be excavated and recompacted to 95%

standard proctor compaction m22.5 200mm thickness Compacted crushed rock, CBR > 80% m32.6 Compacted Sand; 50mm thk m32.7 Disposal of excavated material to designated location; on site m32.8 Disposal of excavated material; off site m32.9 Plastic sheet 0.07 mm.thk.; under Expantion joints m22.10 Concrete;Reinforced; 240 ksc; Roads; thickness 200mm. m32.11 Concrete;Reinforced; 240 ksc; Roads; thickness 150mm. m32.12 Formwork to roads; edge height not exceeding 200mm. m22.13 Reinforcement mesh; 6mm. diameter at 150mm,300mm. c/c. m22.14 Expansion joints; complete with RB25 with metal cap; painted and

d th d l b t 300 / C t ith b d


greassed smooth dowel bar at 300mm. c/c, Coat with bond breaking compound 500mm long and 25mm compressible filler m

2.15 Isolation joints; w/ 25mm compressible filler2.16 Construction & Transvers joints; complete with RB25 painted and

greassed smooth dowel bar at 300mm. c/c, Coat with bond breaking compound 500mm long m

2.17 Joint detail between existing road and new road; complete with RB16 painted and greassed smooth dowel bar 300mm long at 300mm. c/c, Epoxy grout m

2.18 Longitudinal Joint ; w/ 10mm. Wide by 40 mm.deep sawcut,fill with joint sealer m

2.19 Provision for Road marking ls2.20 Concrete Kerb; including formwork and reinforcement as kerb m2.21 Colour cement block for Footpath m2

D.3 Drainage - No details3.1 Manholes (MH-1) 1000mm diameter complete; including all excavation,

concrete, formwork, reinforcement, benching, associated metalwork and covers as drawing 36367-CV-210 no.

3.2 Manholes (MH-2) 1000mm diameter complete; including all excavation, concrete, formwork, reinforcement, benching, associated metalwork and steel grating covers as drawing 36367-CV-210 no.

3.3 Manholes (MH-3) 1000mm diameter complete; including all excavation, concrete, formwork, reinforcement, benching, associated metalwork and covers as drawing 36367-CV-210 no.

3.4 300mm diameter RC pipework including all excavation, bedding materials, backfill and reinstatrment - as detail on drawing 36367-CV-210 m.

3.5 680x230 mm rectangular drainage pipework including all excavation, bedding materials, backfill and reinstatrment - as detail on drawing 36367-CV-210 m.

3.6 400mm V drain; including all excavation, concrete, formwork, reinforcement and joint; complete with RB25 with metal cap; painted and greassed smooth dowel bar at 300mm. c/c, Coat with bond breaking compound 500mm long and 25mm compressible filler m.

Infrastructure - 58 / 62





D.4 Other Items To Collection4.1 Excavation and Earthwork for Parking and Flag Pole

4.1.1 Excavation m34.1.2 Filling with selected excavated material in accordance with the

Engineer 's specification.m3

4.1.3 Lean concrete; Beds; 150 ksc; thickness 50mm. m34.1.4 I 180x180x8000mm Long Pc pile no.4.1.5 Pile cut-off no.4.2 Parking Concrete structure (Drawing 36367-CV-220)

4.2.1 Concrete;Reinforced; 240 ksc; Foundations. m34.2.2 Formwork; sides of Foundations. m24.2.3 Reinforcement bar kg4.2.4 Wires kg4.2.5 Nails kg4.3 Parking Steel Structure Roof

4.3.1 P1-roundbar Dia- 76.0x3.2mm. X 5.71 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

4.3.2 SB1-roundbar Dia-114.3x4.5mm. X12.2 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

4.3.3 SC1-roundbar Dia-114.3x4.5mm. X12.2 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

4.3.4 XB1-roundbar Dia-15mm. ROD+ Turn Buckle Every 5 Bay; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

4.3.5 SS2-roundbar Dia-34x2.3mm. X 1.8 kg/m.; complete w/surface finishes in accordance with Engineers Specification (Surface finish to measure separately) kg

4.3.6 Steel Plate - 175x175x10mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-CV-220 (Surface finish to measure separately) kg

4.3.7 Steel Plate - 275x275x10mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-CV-221 (Surface finish to measure separately) kg

4.3.8 L 40x40x3 - 350 Long in accordance with Engineers Specification as Drawing no. 36367-CV-221 kg

4.3.9 4 M 12 Bolts G8.8x400L in accordance with Engineers Specification as Drawing no. 36367-CV-221 no.


4.4 RC Wall 200mm. Thk at Flag Pole m4.4.1 Concrete;Reinforced; 240 ksc; m34.4.2 Formwork m24.4.3 Reinforcement bar kg4.4.4 Wires kg4.4.5 Nails kg4.4.6 Block wall m24.4.7 Dia-50mm. PVC Drain m4.5 FlagPole Steel Structure

4.5.1 Steel Plate - 300x300x16mm.thk. ; complete w/surface finishes in accordance with Engineers Specification as Drawing no. 36367-CV-225 (Surface finish to measure separately)

4.5.2 4 M 16 Bolts in accordance with Engineers Specification as Drawing no. 36367-CV-225






CollectionD Infrastructure & External Works

D.1 General

D.2 Road Construction

D.3 Drainage - No details

D.4 Other Items

Total Infrastructure & External Works to Summary




BILLS OF QUANTITIES

SECTION 6 – PRIME COST & PROVISIONAL SUMS

Employer: Kerry Ingredients Thailand Ltd. Section 6Prime Cost & Provisional Sums

Prime Cost and Provisional Sums Item Description Qty Unit Rate Amount

Document Reference: 077/GES/BoQ/SUMMARYProject Name: Kerry Ingredients Facility Expansion

Prime Cost & Provisional Sums Total -To Summary -

Provisional Sums - 61/62

Documents

KERRY INGREDIENTS FACILITY EXPANSION (BANGPOO …Document Reference: 077/GES/BoQ/SUMMARY Rate Project Name: Kerry Ingredients Facility Expansion 7.1.26 12mm. CLEAT Plate ; complete