Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
B
AB
A B
B
AB
A B
Guía de inicio rápido
Sistema de compresión secuencial Kendall SCD™ 700
Botas de compresión
Botas de compresión
Controlador
Manguitosde pie
Mangueras
Manguitosde pie
Controlador y juego de mangueras
Prendas(empacadas por separado)
4 5 6 7 8 9
2 3
1 Instale el controlador:
Envuelva la pierna con la bota
Alinee el talón con el borde del manguito
Revise el ajuste
Revise el ajuste
Conecte la manguera a la bota
Conecte la manguera al manguitode pie
Encienda el controlador
Encienda el controlador
Ahora comienza el tratamiento
Aparecen marcas de verificación. Presione los botones A o B al lado de las marcas de verificación.
Cuando se utilizan botas de compresión, no se requieren otros pasos para comenzar el tratamiento.
No se requieren otros pasos para comenzar eltratamiento.
Espere que terminen lascomprobaciones internas.
Espere que terminen las comprobaciones internas antes de proceder.
Un buen ajuste deja soloespacio suficiente para dos dedos entre la bota y la pierna.
Una vez envuelto y asegurado, el manguitodebe quedar ajustado como el calzado deportivo.
NOTA: El conector de la manguera debe quedar a la altura del tobillo.
NOTA: Consulte la imagen del manguito de pie si necesita ayuda para la alineación.
NOTA: La correa se pasa por detrás del talón.
Configuración de las botas de compresión
Configuración del controlador
Configuración de los manguitos de pie
Enchufe el controlador
Todavía NO encienda el controlador
Conecte las mangueras al controlador
NO cubra el controlador
En una superficie plana cerca de una silla
En una superficie plana cerca de la cama
Coloque el controlador en el pie de cama
Utilizar según las instruccionesUsar según prescripción médica. Quite las prendas durante períodos breves para que el paciente camine o se bañe.
contacte a su proveedor de servicios local.Ante cualquier consulta,
Precaución, consulte
los documentos que acompañan al
producto.
H29525
Quick Start Guide
Kendall SCD™ 700 Sequential Compression System
Leg Sleeve(s)
Leg Sleeve(s)
Controller
Foot Cuff(s)
Tubing
Foot Cuff(s)
Controller & Tubing Set
Garments(packaged separately)
4 5 6 7 8 9
2 3
1 Put Controller on:
Wrap leg sleeve(s)around leg(s)
Align heel with edgeof cuff
Check for snug fit
Check for snug fit
Attach tubing to legsleeve(s)
Attach tubing to footcuff(s)
Turn Controller on
Turn Controller on
Therapy will now begin
Checkmark(s) will appear. Press A and/or B button(s)next to checkmark(s).
Therapy will now begin
When using leg sleeves, nofurther action is necessary to begin therapy.
No further action is necessary to begintherapy.
Wait for internalchecks to finish
Wait for internalchecks to finishbefore proceeding.
A snug fit will allow justenough room for two fingersto fit between sleeve and leg.
Wrap and secure, cuffshould fit snug like a sneaker.
© 2011 Covidien. Printed in China. Covidien llc, 15 Hampshire Street,
Mansfield, MA 02048 USA. www.covidien.comSMF1111-013
NOTE: The tubing connectorshould be at the ankle.
NOTE: Look at image on foot cuff for help aligning.
NOTE: Strap wraps around back of heel.
Set up Leg Sleeve(s)Set up Controller
Set up Foot Cuff(s)
Plug Controller in
Do NOT turn Controller onyet
Attach tubing toController
Do NOT cover Controller
Flat surface near chair
Flat surface near bed
Put controller on footboard
Use as DirectedWear as prescribed. Remove garmentsfor brief periods to walk or to bathe.
please contact your local service provider.For any questions Caution, consult
accompanyingdocuments
H29525
(Front Side)
(Back Side)
Ahora comienza el tratamiento
4 5 6 7 8
4 5 6 7 8
OPTION AProduct Brand: Kendall SCDTM
Product Descriptor: 700 Sequential Compression System
REF #: H29525
GBU & COT: Vascular Therapies / Compression
REV: (MM/DD/YYYY) 06/05/2012
TECHNICAL INFORMATION
Application/ Version: InDesign/CS5
Placed Images: N/A
Fonts Used: Myriad Pro
Comments:
Printer Notes:
15 Hampshire Street, Mansfield, MA 02048
GBU-SPECIFIC INFORMATION
Graphic Designer: Debbie Murray
Noel Gouveia
DESIGN AGENCY INFORMATION(for external use only)
Agency Name: Ximedica
Agency Contact: XXXXXX
ADDITIONAL JOB INFORMATION (if available)
Job #: PC0203 Dims: 22.000” W x 8.500” H
Artwork/Part #: SMF1111-013 Metric
Dims: 55.880 cm x 21.590 cm
Print Process: N/A Package
Type: OSG (Instructions)
Barcode Format: N/A File
Name: SMF1111-013_H29525_OSG
Dieline: N/A Temp ID: 1047115_H29525B_OSG_COVTMP
Check US Only here if: Generic Artwork
Linked to Generic Artwork: (if applicable)
N/A
TINTS
NUMBER OF COLORS
XXXXXXXX XXXX XXXX XXXX XXXX
XX% XXXX
50% PMS 292C
XX% XXXX
XX% XXXX
XX% XXXX
XX% XXXX
PMS 281CBlack PMS 292C Cyan Yellow Magenta
B
AB
A B
B
AB
A B
Guía de inicio rápido
Sistema de compresión secuencial Kendall SCD™ 700
Botas de compresión
Botas de compresión
Controlador
Manguitosde pie
Mangueras
Manguitosde pie
Controlador y juego de mangueras
Prendas(empacadas por separado)
4 5 6 7 8 9
2 3
1 Instale el controlador:
Envuelva la pierna con la bota
Alinee el talón con el borde del manguito
Revise el ajuste
Revise el ajuste
Conecte la manguera a la bota
Conecte la manguera al manguitode pie
Encienda el controlador
Encienda el controlador
Ahora comienza el tratamiento
Aparecen marcas de verificación. Presione los botones A o B al lado de las marcas de verificación.
Cuando se utilizan botas de compresión, no se requieren otros pasos para comenzar el tratamiento.
No se requieren otros pasos para comenzar eltratamiento.
Espere que terminen lascomprobaciones internas.
Espere que terminen las comprobaciones internas antes de proceder.
Un buen ajuste deja soloespacio suficiente para dos dedos entre la bota y la pierna.
Una vez envuelto y asegurado, el manguitodebe quedar ajustado como el calzado deportivo.
NOTA: El conector de la manguera debe quedar a la altura del tobillo.
NOTA: Consulte la imagen del manguito de pie si necesita ayuda para la alineación.
NOTA: La correa se pasa por detrás del talón.
Configuración de las botas de compresión
Configuración del controlador
Configuración de los manguitos de pie
Enchufe el controlador
Todavía NO encienda el controlador
Conecte las mangueras al controlador
NO cubra el controlador
En una superficie plana cerca de una silla
En una superficie plana cerca de la cama
Coloque el controlador en el pie de cama
Utilizar según las instruccionesUsar según prescripción médica. Quite las prendas durante períodos breves para que el paciente camine o se bañe.
contacte a su proveedor de servicios local.Ante cualquier consulta,
Precaución, consulte
los documentos que acompañan al
producto.
H29525
Quick Start Guide
Kendall SCD™ 700 Sequential Compression System
Leg Sleeve(s)
Leg Sleeve(s)
Controller
Foot Cuff(s)
Tubing
Foot Cuff(s)
Controller & Tubing Set
Garments(packaged separately)
4 5 6 7 8 9
2 3
1 Put Controller on:
Wrap leg sleeve(s)around leg(s)
Align heel with edgeof cuff
Check for snug fit
Check for snug fit
Attach tubing to legsleeve(s)
Attach tubing to footcuff(s)
Turn Controller on
Turn Controller on
Therapy will now begin
Checkmark(s) will appear. Press A and/or B button(s)next to checkmark(s).
Therapy will now begin
When using leg sleeves, nofurther action is necessary to begin therapy.
No further action is necessary to begintherapy.
Wait for internalchecks to finish
Wait for internalchecks to finishbefore proceeding.
A snug fit will allow justenough room for two fingersto fit between sleeve and leg.
Wrap and secure, cuffshould fit snug like a sneaker.
© 2011 Covidien. Printed in China. Covidien llc, 15 Hampshire Street,
Mansfield, MA 02048 USA. www.covidien.comSMF1111-013
NOTE: The tubing connectorshould be at the ankle.
NOTE: Look at image on foot cuff for help aligning.
NOTE: Strap wraps around back of heel.
Set up Leg Sleeve(s)Set up Controller
Set up Foot Cuff(s)
Plug Controller in
Do NOT turn Controller onyet
Attach tubing toController
Do NOT cover Controller
Flat surface near chair
Flat surface near bed
Put controller on footboard
Use as DirectedWear as prescribed. Remove garmentsfor brief periods to walk or to bathe.
please contact your local service provider.For any questions Caution, consult
accompanyingdocuments
H29525
(Front Side)
(Back Side)
Ahora comienza el tratamiento
4 5 6 7 8
4 5 6 7 8
OPTION AProduct Brand: Kendall SCDTM
Product Descriptor: 700 Sequential Compression System
REF #: H29525
GBU & COT: Vascular Therapies / Compression
REV: (MM/DD/YYYY) 06/05/2012
TECHNICAL INFORMATION
Application/ Version: InDesign/CS5
Placed Images: N/A
Fonts Used: Myriad Pro
Comments:
Printer Notes:
15 Hampshire Street, Mansfield, MA 02048
GBU-SPECIFIC INFORMATION
Graphic Designer: Debbie Murray
Noel Gouveia
DESIGN AGENCY INFORMATION(for external use only)
Agency Name: Ximedica
Agency Contact: XXXXXX
ADDITIONAL JOB INFORMATION (if available)
Job #: PC0203 Dims: 22.000” W x 8.500” H
Artwork/Part #: SMF1111-013 Metric
Dims: 55.880 cm x 21.590 cm
Print Process: N/A Package
Type: OSG (Instructions)
Barcode Format: N/A File
Name: SMF1111-013_H29525_OSG
Dieline: N/A Temp ID: 1047115_H29525B_OSG_COVTMP
Check US Only here if: Generic Artwork
Linked to Generic Artwork: (if applicable)
N/A
TINTS
NUMBER OF COLORS
XXXXXXXX XXXX XXXX XXXX XXXX
XX% XXXX
50% PMS 292C
XX% XXXX
XX% XXXX
XX% XXXX
XX% XXXX
PMS 281CBlack PMS 292C Cyan Yellow Magenta
B
AB
A B
B
AB
A B
Guía de inicio rápido
Sistema de compresión secuencial Kendall SCD™ 700
Botas de compresión
Botas de compresión
Controlador
Manguitosde pie
Mangueras
Manguitosde pie
Controlador y juego de mangueras
Prendas(empacadas por separado)
4 5 6 7 8 9
2 3
1 Instale el controlador:
Envuelva la pierna con la bota
Alinee el talón con el borde del manguito
Revise el ajuste
Revise el ajuste
Conecte la manguera a la bota
Conecte la manguera al manguitode pie
Encienda el controlador
Encienda el controlador
Ahora comienza el tratamiento
Aparecen marcas de verificación. Presione los botones A o B al lado de las marcas de verificación.
Cuando se utilizan botas de compresión, no se requieren otros pasos para comenzar el tratamiento.
No se requieren otros pasos para comenzar eltratamiento.
Espere que terminen lascomprobaciones internas.
Espere que terminen las comprobaciones internas antes de proceder.
Un buen ajuste deja soloespacio suficiente para dos dedos entre la bota y la pierna.
Una vez envuelto y asegurado, el manguitodebe quedar ajustado como el calzado deportivo.
NOTA: El conector de la manguera debe quedar a la altura del tobillo.
NOTA: Consulte la imagen del manguito de pie si necesita ayuda para la alineación.
NOTA: La correa se pasa por detrás del talón.
Configuración de las botas de compresión
Configuración del controlador
Configuración de los manguitos de pie
Enchufe el controlador
Todavía NO encienda el controlador
Conecte las mangueras al controlador
NO cubra el controlador
En una superficie plana cerca de una silla
En una superficie plana cerca de la cama
Coloque el controlador en el pie de cama
Utilizar según las instruccionesUsar según prescripción médica. Quite las prendas durante períodos breves para que el paciente camine o se bañe.
contacte a su proveedor de servicios local.Ante cualquier consulta,
Precaución, consulte
los documentos que acompañan al
producto.
H29525
Quick Start Guide
Kendall SCD™ 700 Sequential Compression System
Leg Sleeve(s)
Leg Sleeve(s)
Controller
Foot Cuff(s)
Tubing
Foot Cuff(s)
Controller & Tubing Set
Garments(packaged separately)
4 5 6 7 8 9
2 3
1 Put Controller on:
Wrap leg sleeve(s)around leg(s)
Align heel with edgeof cuff
Check for snug fit
Check for snug fit
Attach tubing to legsleeve(s)
Attach tubing to footcuff(s)
Turn Controller on
Turn Controller on
Therapy will now begin
Checkmark(s) will appear. Press A and/or B button(s)next to checkmark(s).
Therapy will now begin
When using leg sleeves, nofurther action is necessary to begin therapy.
No further action is necessary to begintherapy.
Wait for internalchecks to finish
Wait for internalchecks to finishbefore proceeding.
A snug fit will allow justenough room for two fingersto fit between sleeve and leg.
Wrap and secure, cuffshould fit snug like a sneaker.
© 2011 Covidien. Printed in China. Covidien llc, 15 Hampshire Street,
Mansfield, MA 02048 USA. www.covidien.comSMF1111-013
NOTE: The tubing connectorshould be at the ankle.
NOTE: Look at image on foot cuff for help aligning.
NOTE: Strap wraps around back of heel.
Set up Leg Sleeve(s)Set up Controller
Set up Foot Cuff(s)
Plug Controller in
Do NOT turn Controller onyet
Attach tubing toController
Do NOT cover Controller
Flat surface near chair
Flat surface near bed
Put controller on footboard
Use as DirectedWear as prescribed. Remove garmentsfor brief periods to walk or to bathe.
please contact your local service provider.For any questions Caution, consult
accompanyingdocuments
H29525
(Front Side)
(Back Side)
Ahora comienza el tratamiento
4 5 6 7 8
4 5 6 7 8
OPTION AProduct Brand: Kendall SCDTM
Product Descriptor: 700 Sequential Compression System
REF #: H29525
GBU & COT: Vascular Therapies / Compression
REV: (MM/DD/YYYY) 06/05/2012
TECHNICAL INFORMATION
Application/ Version: InDesign/CS5
Placed Images: N/A
Fonts Used: Myriad Pro
Comments:
Printer Notes:
15 Hampshire Street, Mansfield, MA 02048
GBU-SPECIFIC INFORMATION
Graphic Designer: Debbie Murray
Noel Gouveia
DESIGN AGENCY INFORMATION(for external use only)
Agency Name: Ximedica
Agency Contact: XXXXXX
ADDITIONAL JOB INFORMATION (if available)
Job #: PC0203 Dims: 22.000” W x 8.500” H
Artwork/Part #: SMF1111-013 Metric
Dims: 55.880 cm x 21.590 cm
Print Process: N/A Package
Type: OSG (Instructions)
Barcode Format: N/A File
Name: SMF1111-013_H29525_OSG
Dieline: N/A Temp ID: 1047115_H29525B_OSG_COVTMP
Check US Only here if: Generic Artwork
Linked to Generic Artwork: (if applicable)
N/A
TINTS
NUMBER OF COLORS
XXXXXXXX XXXX XXXX XXXX XXXX
XX% XXXX
50% PMS 292C
XX% XXXX
XX% XXXX
XX% XXXX
XX% XXXX
PMS 281CBlack PMS 292C Cyan Yellow Magenta
B
AB
A B
B
AB
A B
Guía de inicio rápido
Sistema de compresión secuencial Kendall SCD™ 700
Botas de compresión
Botas de compresión
Controlador
Manguitosde pie
Mangueras
Manguitosde pie
Controlador y juego de mangueras
Prendas(empacadas por separado)
4 5 6 7 8 9
2 3
1 Instale el controlador:
Envuelva la pierna con la bota
Alinee el talón con el borde del manguito
Revise el ajuste
Revise el ajuste
Conecte la manguera a la bota
Conecte la manguera al manguitode pie
Encienda el controlador
Encienda el controlador
Ahora comienza el tratamiento
Aparecen marcas de verificación. Presione los botones A o B al lado de las marcas de verificación.
Cuando se utilizan botas de compresión, no se requieren otros pasos para comenzar el tratamiento.
No se requieren otros pasos para comenzar eltratamiento.
Espere que terminen lascomprobaciones internas.
Espere que terminen las comprobaciones internas antes de proceder.
Un buen ajuste deja soloespacio suficiente para dos dedos entre la bota y la pierna.
Una vez envuelto y asegurado, el manguitodebe quedar ajustado como el calzado deportivo.
NOTA: El conector de la manguera debe quedar a la altura del tobillo.
NOTA: Consulte la imagen del manguito de pie si necesita ayuda para la alineación.
NOTA: La correa se pasa por detrás del talón.
Configuración de las botas de compresión
Configuración del controlador
Configuración de los manguitos de pie
Enchufe el controlador
Todavía NO encienda el controlador
Conecte las mangueras al controlador
NO cubra el controlador
En una superficie plana cerca de una silla
En una superficie plana cerca de la cama
Coloque el controlador en el pie de cama
Utilizar según las instruccionesUsar según prescripción médica. Quite las prendas durante períodos breves para que el paciente camine o se bañe.
contacte a su proveedor de servicios local.Ante cualquier consulta,
Precaución, consulte
los documentos que acompañan al
producto.
H29525
Quick Start Guide
Kendall SCD™ 700 Sequential Compression System
Leg Sleeve(s)
Leg Sleeve(s)
Controller
Foot Cuff(s)
Tubing
Foot Cuff(s)
Controller & Tubing Set
Garments(packaged separately)
4 5 6 7 8 9
2 3
1 Put Controller on:
Wrap leg sleeve(s)around leg(s)
Align heel with edgeof cuff
Check for snug fit
Check for snug fit
Attach tubing to legsleeve(s)
Attach tubing to footcuff(s)
Turn Controller on
Turn Controller on
Therapy will now begin
Checkmark(s) will appear. Press A and/or B button(s)next to checkmark(s).
Therapy will now begin
When using leg sleeves, nofurther action is necessary to begin therapy.
No further action is necessary to begintherapy.
Wait for internalchecks to finish
Wait for internalchecks to finishbefore proceeding.
A snug fit will allow justenough room for two fingersto fit between sleeve and leg.
Wrap and secure, cuffshould fit snug like a sneaker.
© 2011 Covidien. Printed in China. Covidien llc, 15 Hampshire Street,
Mansfield, MA 02048 USA. www.covidien.comSMF1111-013
NOTE: The tubing connectorshould be at the ankle.
NOTE: Look at image on foot cuff for help aligning.
NOTE: Strap wraps around back of heel.
Set up Leg Sleeve(s)Set up Controller
Set up Foot Cuff(s)
Plug Controller in
Do NOT turn Controller onyet
Attach tubing toController
Do NOT cover Controller
Flat surface near chair
Flat surface near bed
Put controller on footboard
Use as DirectedWear as prescribed. Remove garmentsfor brief periods to walk or to bathe.
please contact your local service provider.For any questions Caution, consult
accompanyingdocuments
H29525
(Front Side)
(Back Side)
Ahora comienza el tratamiento
4 5 6 7 8
4 5 6 7 8
OPTION AProduct Brand: Kendall SCDTM
Product Descriptor: 700 Sequential Compression System
REF #: H29525
GBU & COT: Vascular Therapies / Compression
REV: (MM/DD/YYYY) 06/05/2012
TECHNICAL INFORMATION
Application/ Version: InDesign/CS5
Placed Images: N/A
Fonts Used: Myriad Pro
Comments:
Printer Notes:
15 Hampshire Street, Mansfield, MA 02048
GBU-SPECIFIC INFORMATION
Graphic Designer: Debbie Murray
Noel Gouveia
DESIGN AGENCY INFORMATION(for external use only)
Agency Name: Ximedica
Agency Contact: XXXXXX
ADDITIONAL JOB INFORMATION (if available)
Job #: PC0203 Dims: 22.000” W x 8.500” H
Artwork/Part #: SMF1111-013 Metric
Dims: 55.880 cm x 21.590 cm
Print Process: N/A Package
Type: OSG (Instructions)
Barcode Format: N/A File
Name: SMF1111-013_H29525_OSG
Dieline: N/A Temp ID: 1047115_H29525B_OSG_COVTMP
Check US Only here if: Generic Artwork
Linked to Generic Artwork: (if applicable)
N/A
TINTS
NUMBER OF COLORS
XXXXXXXX XXXX XXXX XXXX XXXX
XX% XXXX
50% PMS 292C
XX% XXXX
XX% XXXX
XX% XXXX
XX% XXXX
PMS 281CBlack PMS 292C Cyan Yellow Magenta