Standards – Measuring instruments Page 1 of 4

STANDARDS – MEASURING INSTRUMENTS KEMA-standards are obtainable at KEMA Quality Solutions B.V., P.O.Box 5185, NL - 6802 ED ARNHEM Direct line +31 26 356 35 13 - Telefax +31 26 352 58 00 Other mentioned standards are obtainable at Nederlands Normalisatie-instituut (NEN), P.O.Box 5059, NL - 2600 GB DELFT USED ABBREVIATIONS AND TERMS A - amendment N/NEN - NEN-standard BS - British Standard ÖVE - ÖVE-standard C - corrigendum prA - draft amendment CEE - CEE-publication prEN - draft European Standard DIN VDE - DIN VDE-standard doi - date of introduction by KEMA prHD - draft Harmonization Document dow - date end of validity EN - European Standard +S - supplement fn - former number sb - superseded by HD - Harmonization Document ucd - date of ultimate certification IEC - IEC-publication K/KEMA - KEMA-standard upd - date of ultimate production (m) - modified W - amendment

Standards – Measuring instruments Page 2 of 4

MEAS EN 60044-1:1999 Based on IEC 60044-1:1996 (m) Instrument transformers - Part 1: Current transformers doi: 2000-08-01, ucd: 2003-09-01, upd: 2003-09-01 EN 60044-1:1999/A1:2000 Based on IEC 60044-1:1996/A1:2000 doi: 2001-06-01, ucd: 2005-12-01, upd: 2005-12-01 EN 60044-1:1999/A2:2003 Based on IEC 60044-1:1996/A2:2002 doi: 2003-08-12 EN 61010-1:2001 Based on IEC 61010-1:2001 +C:2002-05 +C2:2003-04 Safety requirements for electrical equipment for measurement, control and laboratory use;Part 1: General requirements doi: 2001-11-01 EN 61010-1:2001/C11:2002 doi: 2003-08-11 EN 61010-2-010:1994 Based on IEC 61010-2-010:1992 (m) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials doi: 1998-12-01, dow: 2006-10-01, ucd: 2006-10-01, upd: 2006-10-01 EN 61010-2-010:1994/A1:1996 Based on IEC 61010-2-010:1992/A1:1996 doi: 1998-12-01, dow: 2006-10-01, ucd: 2006-10-01, upd: 2006-10-01 EN 61010-2-010:2003 Based on IEC 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials doi: 2004-01-08 EN 61010-2-020:1994 Based on IEC 61010-2-020:1992 (m) Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges doi: 1998-12-01 EN 61010-2-020:1994/A1:1996 Based on IEC 61010-2-020:1992/A1:1996 doi: 1998-12-01

Standards – Measuring instruments Page 3 of 4

EN 61010-2-032:1995 Based on IEC 61010-2-032:1994 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held current-clamps for electrical measurement and test doi: 1998-12-01, dow: 2005-11-01, ucd: 2005-11-01, upd: 2005-11-01 EN 61010-2-032:2002 Based on IEC 61010-2-032:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held current-clamps for electrical measurement and test doi: 2003-08-01 EN 61010-2-041:1996 Based on IEC 61010-2-041:1995 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes doi: 1998-12-01 EN 61010-2-042:1997 Based on IEC 61010-2-042:1997 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes doi: 1999-02-01 EN 61010-2-043:1997 Based on IEC 61010-2-043:1997 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory processes doi: 1998-12-01 EN 61010-2-045:2000 Based on IEC 61010-2-045:2000 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-045: particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields doi: 2001-08-01 EN 61010-2-051:1995 Based on IEC 61010-2-051:1995 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mechanical mixing and stirring doi: 1998-12-01, dow: 2006-10-01, ucd: 2006-10-01, upd: 2006-10-01

Standards – Measuring instruments Page 4 of 4

EN 61010-2-051:2003 Based on IEC 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mechanical mixing and stirring doi: 2004-01-08 EN 61010-2-061:1996 Based on IEC 61010-2-061:1995 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionazation doi: 1998-12-01, dow: 2006-10-01, ucd: 2006-10-01, upd: 2006-10-01 EN 61010-2-061:2003 Based on IEC 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionazation doi: 2004-01-08 EN 61010-031:2002 Based on IEC 61010-031:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test doi: 2002-06-01