Embed Size (px)
Citation preview
Keis Heated Clothing is distributed in the UKby Motohaus Powersports LimitedPO Box 7092 Hook RG29 1TYwww.motohaus.com Email: [email protected]
In the interests of product improvement wereserve the right to make technical and
design changes without notice.
www.keisapparel.co.uk
MOTORCYCLING � FISHING � HORSE RIDING � FLYING � SNOWSPORTS � CONSTRUCTION
STAY OUT FOR LONGER WITH KEIS HEATED APPAREL
Visit
WWW.KEISAPPAREL.CO.UKto see the full range of Keis Heated Apparel
and Accessories – All designed tohelp you stay out longer!
O P E R A T I N G I N S T R U C T I O N S
Heated apparel foroutdoor activities
� � �
WARNING: To ensure safe operation follow these instructionscarefully and keep them in a safe place for future reference.
TEM
PE
RATU
RE
CON
TRO
LLERH
E A
T E D
A
P P
A R
E L
F O
R
O U
T D O
O R
A
C T I V
I T I E S
TECHNICAL DATA Voltage: 12V onlyPower Capacity: 150W Maximum
SAFETY & ENVIRONMENT FIRSTDo not dispose of electrical equipment with standard domestic waste. Contact your local authority for disposal information specific to your area.
� Only operate on 12V systems. The unit will be irreparably damaged if operated atother voltages.
� Do not adjust the controller while operating a motorcycle or other machinery.
� Do not allow the unit to become wet.
� Do not modify or disassemble any part of the system in any way.
� Do not use if the product is visibly damaged.Power/Temp Setting Button
Input (male)
USING THE CONTROLLER
DO NOT OPERATE THE CONTROLLER WHILE DRIVING!
The Keis Controller is suitable for all Keis garments and accessories (not heated grips) either operated separately or together. e.g. Jacket, gloves and insoles.
Output (female)
TEMPERATURECONTROLLER
When the clothing (or accessories) are first connected to the power source, all the LEDs on the controller will flash on for about 2 seconds. TO SWITCH ON: Pressing and holding the button for about one second will switch the controller on, defaulting to the Hi setting (Red). Pressing the button again will scroll through the Med (Amber) and Low (Green) settings and back to Hi.
TO SWITCH OFF: Press and hold the button for approx 2 seconds will switch the unit off.
Ensure the controller is kept dry at all times.
NOTE: If using the new style controller with an earlier style garment, it may be necessary to trim the waterproof collar off the output (female) lead to allow connection.
PLUG COMPATABILIITYThe Temperature Controller comes with our snap type Connector but is designed to be compatible with both versions of Keis Connector. To convert the controller to be compatible with all connector types carefully cut away the plastic as per the diagram.
