Upload
keenan-keeley
View
222
Download
0
Embed Size (px)
DESCRIPTION
Furniture, Lighting, Structure.
Citation preview
Design PortfolioKeenan Keeley
Contents
01 Keenan Keeley
Made from one 10’ 2”x4” piece of lumber, the only fasteners used in construction of the 2xStool are basic wood glue and wood joints: tongue and groove, half lap, and mortise and tenon joinery.
2xStool
02 2xStool
1 1
03 Keenan Keeley
04 2xStool
05 Keenan Keeley
Sheet Metal LampMade from a 24”x48” piece of 1/16” steel, the lamp’s form was created through cold bending and is held together by rivets. The inside of the lamps are colored to match their cord.
06 Sheet Metal Lamp
07 Keenan Keeley
08 Sheet Metal Lamp
09 Keenan Keeley
Bent Ply ChairAn experiment to bring the chair and end table together into one piece of furniture with the process of bending plywood, the Bent Ply Chair is framed in oak with hickory seat and backrest.
10 Bent Ply Chair
11 Keenan Keeley
12 Bent Ply Chair
13 Keenan Keeley
A slipcast porcelain drinking vessel inspired by Dutch milk jugs, the Milk Bottle Cup is available in 24oz or 14oz, white or yellow. The cork lid provides a consistent aesthetic feel with the simplicity of the container’s form.
Milk Bottle Cup
14 Milk Bottle Cup
15 Keenan Keeley
16 Alphabet Lamp
17 Keenan Keeley
Alphabet LampMade from a laser cut tagboard interior with a mylar exterior to defuse the light, the Alphabet Lamp is framed with jointed dowels with colored ends that snap into place. The lamp is entirely flat-packable.
18 Alphabet Lamp
19 Keenan Keeley
20 Alphabet Lamp
21 Keenan Keeley
Half Lap TableA CNC milled table cut from 1 1/4” maple plywood, the Half Lap Table is designed to be assembled through a series of half lap and pressure fit joints.Two bolts screw into the top from underneath to make it secure and stable.
22 Half Lap Table
23 Keenan Keeley
24 Half Lap Table
25 Keenan Keeley
Located in Central Oregon, the Gas Structure is made from reclaimed beams and railroad ties salvaged from a local abandoned barn. The project included setting beams,pouring concrete, setting trusses and laying down corrugated metal roofing.
The Gas Structure
26 The Gas Structure
27 Keenan Keeley
28 The Gas Structure
29 The Gas Structure
University of Oregon,BFA in Product Design, June 2011,Bachelor of Science, Material and Product Studies, June 2010
Oregon State University Cascades Campus,Design and Fine Arts 2006-2008.
Education
Experience2011-Present Intern - Studio Gorm2010-Present Intern - Von Tundra2005-2010 Designed & Built Custom Furniture - First Impression Home Design2006-2009 Custom Doors and Cabinets - Bear Creek Doors
Skills- Advanced Woodworking- Model Making- Rapid Prototyping- Hand Drawing & Rendering
- Adobe Creative Suite - Rhino CAD/CAM- Vacumm Forming- Mold Making & Slip Casting
Recognition2011 International Contemporary Funiture Fair, Javits Center, New York City2010 White Box Exhibit, White Stag Building, Portland Oregon2009 LaVerne Krause Exhibit, University of Oregon, Eugene Oregon2009 President of IDSA, University of Oregon Chapter, Eugene Oregon
ReferencesJohn Arndt, Studio Gorm: [email protected]
Dan Anderson, Von Tundra: [email protected]
Kim Favret, First Impression Home Design: [email protected]
2738 Ne 7th Ave.Portland, Oregon 97212