Embed Size (px)
DESCRIPTION
sony pe42xs1 service manual
Citation preview
- 1 -
XS1RM-Y1010
SERVICE MANUAL XS1 CHASSISMODEL COMMANDER DEST
KE-P37XS1 RM-Y1010 AEP
MODEL COMMANDER DEST
KE-P42XS1 RM-Y1010 AEP
RM-Y1010
FLAT PANEL COLOR TV
KE-P37/42XS1
- 2 -
XS1RM-Y1010
TABLE OF CONTENTS
Section Title Page Section Title Page
Caution ................................................................ 3
Specifications ...................................................... 4
Connectors .......................................................... 5
Self Diagnosis ..................................................... 6
1. GENERAL ................................................................... 7
2. DISASSEMBLY2-1. Rear Cover Removal ........................................... 21
2-2. Speaker Cover Removal ..................................... 21
2-3. Speaker Removal ................................................ 22
2-4. H1 Board Removal ............................................. 22
2-5. H2 Board Removal ............................................. 23
2-6. H3 Board Removal ............................................. 23
2-7. H4 Board Removal ............................................. 24
2-8. HMP Board Removal ......................................... 24
2-9. U1 Board Removal ............................................. 25
2-10. APS-202 Board Removal ................................... 25
3. SET-UP ADJUSTMENTS3-1. CVBS PAL System Adjustment ....................... 26
3-2. CVBS NTSC System Adjustment .................... 26
3-3. CVBS SECAM System Adjustment ................. 27
3-4. YC PAL System Adjustment ............................ 27
3-5. YC NTSC System Adjustment .......................... 28
3-6. YC SECAM System Adjustment ...................... 28
3-7. RGB System Adjustment .................................. 29
3-8. YUV System Adjustment .................................. 29
3-9. HDTV Component System Adjustment ............ 30
3-10. White Balance Adjustment ................................. 30
4. DIAGRAMS4-1. Block Diagrams (1) ............................................ 31
Block Diagrams (2) ............................................ 32
4-2. Circuit Board Location ........................................ 32
4-3. Schematic Diagrams and Printed Wiring
Boards ................................................................. 32
H1 Board Schematic Diagram ............................ 33
H1 Printed Wiring Board .................................. 34
H2 Board Schematic Diagram ............................ 33
H2 Printed Wiring Board .................................. 34
H3 Board Schematic Diagram ............................ 35
H3 Printed Wiring Board .................................. 36
H4 Board Schematic Diagram ............................ 35
H4 Printed Wiring Board .................................. 36
U1 Schematic Diagram ....................................... 37
U1 Printed Wiring Board .................................. 43
4-4. Semiconductors .................................................. 45
4-5. IC Blocks ........................................................... 46
5. EXPLODED VIEWS5-1. Rear Cover and Stand ......................................... 47
5-2. Display Panel, Boards, and Speakers ................. 48
6. ELECTRICAL PARTS LIST .................................. 50
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY SHADING AND MARKED ONTHE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THEPARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACETHESE COMPONENTS WITH SONY PARTS WHOSE PARTNUMBERS APPEAR AS SHOWN IN THIS MANUAL OR INSUPPLEMENTS PUBLISHED BY SONY.
WARNING !!
AN ISOLATION TRANSFORMER SHOULD BE USED DURINGANY SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARDDUE TO LIVE CHASSIS, THE CHASSIS OF THIS RECEIVER ISDIRECTLY CONNECTED TO THE POWER LINE.
- 3 -
XS1RM-Y1010
draoB noitcnuF
1H hctiwS
2H lanimreTtupnI
3H revieceRRI&DEL
4H DEL
1U oiduA,WSVA,lanimreTtupnI
The circuit boards listed below [Table 1] used in these modelsmay have been processed using Lead Free Solder. The boards areidentified by the LF logo located close to the board designatione.g. F1, H1 etc [ see examples ]. The servicing of these boardsrequires special precautions to be taken as outlined below.
Table 1
CAUTION
Lead Free Soldered Boardsexample 1
example 2
It is strongly recommended to use Lead Free Solder material in order to guarantee optimal quality of new solder joints. Lead Free Solder isavailable under the following part numbers :
Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. Thisrequires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics.
For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com
rebmuntraP retemaiD skrameR
91-500-046-7 mm3.0 gK52.0
02-500-046-7 mm4.0 gK05.0
12-500-046-7 mm5.0 gK05.0
22-500-046-7 mm6.0 gK52.0
32-500-046-7 mm8.0 gK00.1
42-500-046-7 mm0.1 gK00.1
52-500-046-7 mm2.1 gK00.1
62-500-046-7 mm6.1 gK00.1
- 4 -
XS1RM-Y1010
LEDOMMETI metsySnoisiveleT metsySoeretS egarevoClennahC metsySroloC
PEA L,I,K/D,H/G/BMACIN/NAMREG
oeretS
Q-B,01F-20F,30S-10S,21R-1R,21-2E:FHV96R-12R,96B-12B,96F-12F,96-12E:FHU
02S-10S:VTELBAC14S-12S:REPYH
MACES,LAP34.4CSTN,85.3CSTN
)NIOEDIV(
emaNledoMmetI
1SX73P-EK 1SX24P-EK
PAP FFO FFO
TAP FFO FFO
ytiroirPBGR NO NO
CRD NO NO
1tracS NO NO
2tracS NO NO
3tracS NO NO
)4(nitnorF NO NO
rotcejorP FFO FFO
G/BmroN NO NO
ImroN NO NO
K/DmroN NO NO
SUAmroN FFO FFO
LmroN NO NO
TASmroN FFO FFO
MmroN FFO FFO
txeteleT NO NO
oeretSmaciN NO NO
eziSerutciP
)lenaPyalpsiDamsalP(PDP.xorppa(sehcni73:1SX73P-EK
.)yllanogaidderusaemmc49.xorppa(sehcni24:1SX24P-EK
)yllanogaidderusaemmc701
tuptuOdnuoS
rekaepstfeLdnathgiR )SMR(W51x2
]RAER[slanimreTtuptuO/tupnI snoitacificepSlareneG
rotcennocoruEnip-12:1)dradnatsCELENEC(
.slangisoediVdnaoiduArofstupnI.BGRrofstupnI
oiduAdnaoediVVTfostuptuO.slangis
stnemeriuqeRrewoP V042-022
/noitpmusnoCrewoPybdnatS
)1SX73P-EK(W9.1/W213xorppA)1SX24P-EK(W9.1/W073xorppA
rotcennocoruEnip-12:2)dradnatsCELENEC(
.slangisoediVdnaoiduArofstupnI.BGRrofstupnI
dnaoediVelbatceleSrofstuptuO.ecafretnIkniltramS.slangisoiduA
snoisnemiD)1SX73P-EK(mm682x296x5311xorppA)1SX24P-EK(mm682x357x9221xorppA
rotcennocoruEnip-12:3)dradnatsCELENEC(
.slangisoediVdnaoiduArofstupnI.oediVSrofstupnI
dnaoediVelbatceleSrofstuptuOecafretnIkniltramS.slangisoiduA
thgieW)1SX73P-EK(gk5.73xorppA)1SX24P-EK(gk0.34xorppA
skcaJonohPoiduArofelbairavsrotcennoCtuptuO
.slangiS.tuptuorefooWbuS
seirosseccAdeilppuS
)1(rednammoCetomeR0101Y-MR)2(yrettab30RdetangisedCEI
)1(elbaClaixaoC)1(esuoMVA
kcajiniM .rotcennoCesuoMVA serutaeFrehtO,ybloDlautriV,kniltramS,ICA,CRD,txeteleT
metsysVT,kcitSyromeM,ICA,EBBlatigiD.noitcetedotua
]EDIS[slanimreTtuptuO/tupnI lortnocderarfnI:metsyslortnocetomeRkcajenohpdaeH kcajinimoerets
stnemeriuqerrewoPcdV3
noitangisedCEIseirettab2)AAezis(30R
stupnioiduA skcajonohpstupnioediV skcajonohpkcitSyromeM tolSkcitSyromeM
tupnioediVS NIDnip4
.ecitontuohtiwegnahcottcejbuserasnoitacificepsdnangiseD
- 5 -
XS1RM-Y1010
Connected Not Connected (open) * at 20Hz - 20kHz
Pin No 1 2 4 Signal Signal level
1 Audio output B(right)
Standard level : 0.5V rmsOutput impedence : Less than 1kohm*
2Audio input B(right)
Standard level : 0.5V rmsOutput impedence : More than 10kohm*
3Audio output A(left)
Standard level : 0.5V rmsOutput impedence : Less than 1kohm*
4 Ground (audio)
5 Ground (blue)
6 Audio input A(left)
Standard level : 0.5V rmsOutput impedence : More than 10kohm*
7 Blue input 0.7 +/- 3dB, 75 ohms positive
8 Function select(AV control)
High state (9.5-12V) : Part mode Low state (0-2V) : TV modeInput impedence : More than 10K ohmsInput capacitance : Less than 2nF
9 Ground (green)
10 Open
11 Green Green signal : 0.7 +/- 3dB, 75 ohms, positive
12 Open
13 Ground (red)
14 Ground (blanking)
15
_ _ Red input 0.7 +/- 3dB, 75 ohms, positive
_ (S signal Chroma input)
0.3 +/- 3dB, 75 ohms, positive
16 Blanking input(Ys signal)
High state (1-3V) Low state (0-0.4V)Input impedence : 75 ohms
17 Ground (video output)
18 Ground (video input)
19 Video output 1V +/- 3dB, 75ohms, positive sync 0.3V(-3+10dB)
20
_ _ Video input 1V +/- 3dB, 75ohms, positive sync 0.3V(-3+10dB)
_ Video inputY (S signal)
1V +/- 3dB, 75ohms, positive sync 0.3V(-3+10dB)
21 Common ground(plug, shield)
21 pin connector
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
21
Rear Connection Panel Side Connection Panel
noitarugifnocniptekcosoediVS
niPoN
langiS leveLlangiS
1 dnuorG -
2 dnuorG -
3 tupni)langisS(Y ,mho57Bd3-/+V1V3.0.cnySevitisop
Bd01+3-
4 tupni)langisS(C Bd3-/+V3.0evitisop,mho57
.cnyS
S-Videosocket
3
- 6 -
XS1RM-Y1010
XS1 SELF DIAGNOSTIC SOFTWARE
The identification of errors within the XS1 chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the eventof one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flashingLED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant device numberwill be displayed through the LED (Series of flashes which must be counted).
Flash Timing Example : e.g. error number 3
StBy LED
ON ON
OFF OFF
LED Error Code
DELRORRE
EDOCNOITPIRCSEDRORRE
20 rorrEc2I
30 rorrErednapxEtroP
40 rorrEMORPEE
50 )3742S8H(rorrEnoitacinummoCihcatiH
60 rorrEkcolCemiTlaeR
70 rorrEhctiwSVA
80 rorrEhctiwSVUY
90 rorrEredoceDamorhCniaM
01 )9102AXC(redoceDamorhCretliFbmoCD3
11 rorrEretliFbmoCD3
21 rorrErenuT
31 rorrEFI
41 rorrEPSM
51 )3612AXC(rorrEredocedamorhCbuS
61 )0831ADU(noisrevnoCFIDPSoteugolanA
71 )9802AXC(rorrEhctiwSVAbuS
81 )4114KA(rorrEnoisrevnoCFIDPSotS2I
91 )0246AET(rorrEhctiwSoiduA
02 )0515PVT(rorrEredoceDamorhCsaxeT
12 gninraWerutarepmeThgiH
22 rorrEerutarepmeThgiH
32 rorrEnoitcetorPnaF
42 rorrEnoitcetorPrekaepS
52 detcennoctonelnaClenaP2RM
62 rorrEeciveDihcatiH
72 tsoLnoirartibrACII
82 rorrEeciveDAMME
– 7 –
XS1RM-Y1010
The
oper
atin
g in
stru
ctio
ns m
entio
ned
here
are
par
tial a
bstr
acts
fr
om th
e O
pera
ting
Inst
ruct
ion
Man
ual.
The
pag
e nu
mbe
rs o
f th
e O
pera
ting
Inst
ruct
ion
Man
ual r
emai
n as
in th
e m
anua
l.
SECTION 1 GENERAL
Co
nn
ecti
ng
th
e A
eria
l an
d V
CR
Sta
bili
zin
g t
he
TV
set
Aft
er s
ettin
g up
, sec
ure
the
TV
set
to a
wal
l, pi
llar,
etc
, usi
ng th
e su
pplie
d an
chor
atta
chm
ents
, for
saf
ety
purp
oses
.
1 R
emov
e th
e tw
o sc
rew
s at
tach
ed to
the
uppe
r re
ar s
ide
of th
e T
V s
et.
2 R
epla
ce th
e tw
o sc
rew
s w
ith th
e tw
o su
pplie
d an
chor
atta
chm
ents
.
3 Se
cure
a w
all a
ncho
r bra
cket
(not
sup
plie
d) to
a s
olid
wal
l or
pilla
r.
4 Pa
ss a
str
ong
cord
or
chai
n th
roug
h bo
th h
oles
of
the
anch
orat
tach
men
ts a
nd th
en s
ecur
e to
a w
all o
r pi
llar,
etc
.
•U
se th
e su
pplie
d m
ains
lead
(T
ype
C-4
, Typ
e B
F or
Typ
e C
-5, s
ee p
age
9).
•U
se th
e su
pplie
d co
axia
l cab
le f
or a
eria
l con
nect
ion.
or
For
mor
e de
tails
reg
ardi
ng V
CR
con
nect
ion,
ref
er to
“C
onne
ctin
g O
ptio
nal E
quip
men
t to
the
TV
” on
pa
ge38
.
OU
TIN
VC
R
1 C
onne
ct th
e T
V p
lug
to th
e m
ains
soc
ket (
220-
240V
A
C, 5
0Hz)
.
2T
he f
irst
tim
e th
at th
e T
V s
et is
con
nect
ed, i
t is
usua
lly
turn
ed o
n. I
f th
e T
V is
off
, pre
ss th
e o
n/of
f bu
tton
on
the
TV
set
to tu
rn o
n th
e T
V.
The
fir
st ti
me
you
switc
h on
the
TV
, a L
angu
age
men
u ap
pear
s au
tom
atic
ally
on
the
TV
scr
een.
3Pr
ess
the V
, v, B
or b
but
tons
on
the
rem
ote
cont
rol t
o se
lect
you
r la
ngua
ge, t
hen
pres
s th
e O
K b
utto
n to
con
firm
you
r sel
ectio
n. F
rom
no
w o
n al
l the
men
us w
ill a
ppea
r in
you
r ch
osen
lang
uage
.
4T
he C
ount
ry m
enu
appe
ars
auto
mat
ical
ly. P
ress
the v
or V
but
ton
to s
elec
t the
cou
ntry
in w
hich
you
are
usi
ng th
e T
V. P
ress
the
OK
bu
tton
to c
onfi
rm y
our
sele
ctio
n.
• If
the
coun
try
in w
hich
you
wan
t to
use
the
TV
set
doe
s no
t ap
pear
in th
e lis
t, se
lect
“O
ff”
inst
ead
of a
cou
ntry
.
• T
o av
oid
wro
ng te
lete
xt c
hara
cter
s fo
r cy
rilli
c la
ngua
ges
we
reco
mm
end
sele
ctin
g R
ussi
a if
you
r ow
n co
untr
y do
es n
ot
appe
ar in
the
list.
Sw
itch
ing
On
th
e T
V a
nd
Au
tom
atic
ally
Tu
nin
gT
he fi
rst t
ime
you
switc
h on
you
r TV
, a s
eque
nce
of m
enu
scre
ens
appe
ar o
n th
e T
V e
nabl
ing
you
to: 1
) cho
ose
the
lang
uage
of t
he m
enu
scre
en 2
) Cho
ose
the
coun
try
in w
hich
you
are
goi
ng to
ope
rate
the
TV
, 3) c
heck
how
to
con
nect
opt
iona
l equ
ipm
ent t
o yo
ur T
V, 4
) se
arch
and
sto
re a
ll av
aila
ble
chan
nels
(T
V B
road
cast
) an
d 5)
ch
ange
the
orde
r in
whi
ch th
e ch
anne
ls (
TV
Bro
adca
st)
appe
ar o
n th
e sc
reen
.H
owev
er, i
f you
nee
d to
cha
nge
any
of th
ese
setti
ngs
at a
late
r dat
e, y
ou c
an d
o th
at b
y se
lect
ing
the
appr
opri
ate
optio
n in
the
(Se
t Up
men
u) o
r by
pre
ssin
g th
e A
uto
Star
t Up
butto
n o
n th
e ri
ght s
ide
of T
V s
et.
cont
inue
d...
Countr
y
Sele
ct c
ountr
y
Off
Irela
nd
Nederland
Belg
ië/B
elg
ique
Luxem
bourg
Fra
nce
Italia
Schw
eiz
/Suis
se/S
viz
zera
– 8 –
XS1RM-Y1010
5A
dia
gram
app
ears
sho
win
g yo
u ho
w to
con
nect
a w
ide
rang
e of
eq
uipm
ent t
o yo
ur T
V s
et. F
ollo
w th
e in
stru
ctio
ns a
nd p
ress
the
OK
but
ton
to r
emov
e th
e pi
ctur
e an
d co
ntin
ue th
e au
tom
atic
pr
oces
s.
The
con
nect
ion
diag
ram
sho
uld
be u
sed
as a
gui
de o
nly
as
mos
t equ
ipm
ent c
an b
e co
nnec
ted
to m
ore
than
one
type
of
TV
soc
ket.
Onc
e th
e T
V h
as c
ompl
eted
the
auto
mat
ic
tuni
ng p
roce
ss, r
efer
to th
e ‘C
onne
ctio
n G
uide
’ se
ctio
n on
pa
ge 2
3 fo
r fur
ther
info
rmat
ion
on g
ettin
g th
e be
st se
t up
for
your
equ
ipm
ent.
6T
he A
uto
Tun
ing
men
u ap
pear
s on
the
scre
en. P
ress
the
OK
bu
tton
to s
elec
t Yes
.
7T
he T
V s
tart
s to
aut
omat
ical
ly s
earc
h an
d st
ore
all
av
aila
ble
broa
dcas
t cha
nnel
s fo
r yo
u.
T
his
proc
edur
e co
uld
take
som
e m
inut
es. P
leas
e be
pat
ient
an
d do
not
pre
ss a
ny b
utto
ns, o
ther
wis
e au
tom
atic
tuni
ng
will
not
be
com
plet
ed.
In s
ome
coun
trie
s th
e T
V B
road
cast
er in
stal
ls th
e ch
anne
ls
auto
mat
ical
ly (
AC
I sy
stem
). I
n th
is c
ase,
the
TV
B
road
cast
er s
ends
a m
enu
in w
hich
you
can
sel
ect y
our c
ity
by p
ress
ing
the
v o
r V
but
ton
and
OK
to s
tore
the
chan
nels
.
If n
o ch
anne
ls w
ere
foun
d du
ring
the
auto
tune
pro
cess
, a
mes
sage
app
ears
aut
omat
ical
ly o
n th
e sc
reen
ask
ing
you
to
conn
ect t
he a
eria
l. C
heck
the
aeri
al c
onne
ctio
n (r
efer
to
page
14)
. Pre
ss th
e O
K b
utto
n to
res
tart
the
auto
tuni
ng
proc
ess.
8A
fter
all
avai
labl
e ch
anne
ls a
re c
aptu
red
and
stor
ed,
th
e P
rogr
amm
e So
rtin
g m
enu
auto
mat
ical
ly a
ppea
rs
on th
e sc
reen
ena
blin
g yo
u to
cha
nge
the
orde
r in
w
hich
the
chan
nels
are
sto
red.
a)If
you
wis
h to
kee
p th
e br
oadc
ast c
hann
els
in th
e tu
ned
orde
r,
go to
ste
p 9.
b)
If y
ou w
ish
to s
tore
the
chan
nels
in a
dif
fere
nt o
rder
:
1Pr
ess
the
v o
r V
but
ton
to s
elec
t the
pro
gram
me
num
ber
with
the
chan
nel (
TV
Bro
adca
st)
you
wis
h
to m
ove.
Pre
ss th
e b
but
ton.
2Pr
ess
the
v o
r V
but
ton
to s
elec
t the
new
prog
ram
me
num
ber
posi
tion
for
your
sel
ecte
d
chan
nel (
TV
Bro
adca
st).
Pre
ss th
e O
K b
utto
n to
sto
re.
3R
epea
t ste
ps b
)1 a
nd b
)2 if
you
wis
h to
cha
nge
the
orde
r of
the
othe
r ch
anne
ls.
9 P
ress
the
ME
NU
but
ton
to r
emov
e th
e m
enu
from
the
scre
en
Auto
Tunin
g
Pro
gra
mm
es found:
4
No c
hannel fo
und.
Ple
ase c
onnect aerial
Confirm
Pro
gra
mm
e S
ort
ing
01
02
03
04
05
06
07
08
TV
E
TV
E2
TV
3
C33
C27
C58
S02
S06
Pro
gra
mm
e S
ort
ing
01
TV
E
01
02
03
04
05
06
07
08
TV
E
TV
E2
TV
3
C33
C27
C58
S02
S06
Do y
ou w
ant to
sta
rt
auto
matic tunin
g?
Yes
No
OK
Ple
ase c
onnect your
equip
ment
accord
ing to this
chart
DV
D
Your
TV
set
is n
ow r
eady
for
use
Intr
od
uci
ng
an
d U
sin
g t
he
Men
u S
yste
mY
our
TV
set
use
s an
On-
Scre
en m
enu
syst
em to
gui
de y
ou th
roug
h th
e op
erat
ions
. Use
the
follo
win
g bu
ttons
on
the
Rem
ote
Con
trol
to o
pera
te th
e m
enu
syst
em:
1T
o sw
itch
on
the
men
u sc
reen
s:
Pres
s th
e M
EN
U b
utto
n to
sw
itch
the
firs
t lev
el m
enu
on.
Picture
Adjustment
Picture
Mode:
Live
Contrast:
Reset:
NoiseReduction:
Auto
ColourTone:
Cold
Select:
Enter:
OK
Exit:MENU
Picture
Adjustment
Picture
Mode:
Live
Contrast:
Reset:
NoiseReduction:
Auto
ColourTone:
Cold
Select:
Enter:
OK
Exit:MENU
2T
o na
viga
te t
hrou
gh t
he m
enus
:
• T
o hi
ghlig
ht a
nd s
elec
t the
des
ired
men
u or
opt
ion,
pre
ss v
or V
.
• T
o en
ter
the
sele
cted
men
u or
opt
ion,
pre
ss O
K o
r b
.
• T
o re
turn
to th
e la
st m
enu
or o
ptio
n, p
ress
OK
or B
.
• T
o al
ter
the
setti
ngs
of y
our
sele
cted
opt
ion,
pre
ss v
/V/B
or b
.
• T
o co
nfir
m a
nd s
tore
you
r se
lect
ion,
pre
ss O
K.
3T
o sw
itch
off
the
men
u sc
reen
s:
Pres
s th
e M
EN
U b
utto
n to
rem
ove
the
men
u fr
om th
e s
cree
n.
– 9 –
XS1RM-Y1010
Th
e P
ictu
re A
dju
stm
ent
Men
uT
he “
Pict
ure
Adj
ustm
ent”
men
u al
low
s yo
u to
al
ter
the
pict
ure
setti
ngs.
To
do t
his:
Pres
s th
e M
EN
U b
utto
n an
d th
en p
ress
OK
to
ente
r thi
s m
enu.
Nex
t, pr
ess v
or V
to s
elec
t the
de
sire
d op
tion
and
pres
s O
K. F
inal
ly, r
ead
belo
w
how
to o
pera
te in
to e
ach
optio
n.
Pic
ture
Mod
e T
his
optio
n al
low
s yo
u to
cus
tom
ise
the
Pict
ure
Mod
e ba
sed
on th
e pr
ogra
mm
e yo
u ar
e w
atch
ing.
Aft
er s
elec
ting
this
opt
ion
pres
s O
K. N
ext,
pres
s re
peat
edly
v
or V
to s
elec
t:
Liv
e (f
or li
ve b
road
cast
pro
gram
mes
, DV
D a
nd D
igita
l Set
Top
Box
re
ceiv
ers)
.M
ovie
(f
or f
ilms)
.
Per
sona
l (f
or in
divi
dual
set
tings
).
Onc
e yo
u ha
ve s
elec
ted
your
des
ired
opt
ion,
pre
ss O
K to
sto
re.
"Bri
ghtn
ess"
, "C
olou
r" a
nd "
Shar
pnes
s" l
evel
of
"Liv
e" a
nd "
Mov
ie"
mod
e ar
e fi
xed
on th
e fa
ctor
y to
get
the
best
pic
ture
qua
lity.
Con
tras
tPr
ess B
or b
to r
educ
e or
enh
ance
pic
ture
con
tras
t. N
ext,
pres
s O
K to
sto
re.
Bri
ghtn
ess
Pres
s B
or b
to d
arke
n or
bri
ghte
n th
e pi
ctur
e. N
ext,
pres
s O
K to
sto
re.
Thi
s op
tion
only
app
ears
and
can
onl
y be
adj
uste
d if
“Pi
ctur
e M
ode”
is s
et to
“Pe
rson
al”.
Col
our
Pres
s B
or b
to d
ecre
ase
or to
incr
ease
col
or in
tens
ity. N
ext p
ress
OK
to s
tore
.
Thi
s op
tion
only
app
ears
and
can
onl
y be
adj
uste
d if
“Pi
ctur
e M
ode”
is s
et to
“Pe
rson
al”.
Hue
Pres
s B
or b
to d
ecre
ase
or to
incr
ease
the
gree
n to
nes.
Nex
t pre
ss O
K to
sto
re.
Thi
s op
tion
only
app
ears
for
NT
SC s
igna
l (e.
g. U
SA v
ideo
tape
s).
Shar
pnes
sPr
ess B
or b
to s
ofte
n or
to s
harp
en th
e pi
ctur
e. N
ext p
ress
OK
to s
tore
.
Thi
s op
tion
only
app
ears
and
can
onl
y be
adj
uste
d if
“Pi
ctur
e M
ode”
is s
et to
“Pe
rson
al”.
,
Picture
Adjustment
Picture
Mode:
Live
Contrast:
Reset:
NoiseReduction:
Auto
ColourTone:
Cold
Select:
Enter:
OK
Exit:MENU
Picture
Adjustment
Select:
Back:
Enter:
OK
Picture
Mode:
Live
Contrast:
Reset:
NoiseReduction:
Auto
ColourTone:
Cold
ME
NU
cont
inue
d...
Res
etPr
ess
OK
to r
eset
the
pict
ure
to th
e fa
ctor
y pr
eset
leve
ls.
Noi
se
This
opti
on
is
set
to A
uto
to a
uto
mat
ical
ly r
edu
ce t
he
sno
wy
pic
ture
vis
ible
in t
he
wea
k b
road
cast
Red
ucti
on
signal
. H
ow
ever
, it
can
be
modif
ied. A
fter
sel
ecti
ng t
his
opti
on p
ress
b. N
ext,
pre
ss v
or V
to
sele
ct H
igh,
Mid
, Low
or
Off
. F
inal
ly,
pre
ss O
K t
o s
tore
.
Col
our
Ton
eT
his
optio
n al
low
s yo
u to
alte
r the
tint
of t
he p
ictu
re. A
fter
sel
ectin
g th
is o
ptio
n pr
ess b
. Nex
t, pr
ess
repe
ated
ly v
or V
to s
elec
t: W
arm
(gi
ves
the
whi
te c
olou
rs a
red
tint
), N
orm
al (
give
s th
e w
hite
co
lour
s a
neut
ral t
int)
, Col
d (g
ives
the
whi
te c
olou
rs a
blu
e tin
t). F
inal
ly p
ress
OK
to s
tore
.
DR
C M
od
eT
his
opti
on a
llow
s you to s
elec
t th
e hig
h r
esolu
tion p
ictu
re w
ith
4x d
ensi
ty f
or
hig
h q
ual
ity s
ourc
es
(i.e
. D
VD
pla
yer
, sa
tell
ite
rece
iver
). T
his
op
tio
n i
s se
t to
Hig
h D
ensi
ty (
reco
mm
ended
for
movin
g
pic
ture
s). H
ow
ever
it
can b
e m
odif
ied. A
fter
sel
ecti
ng t
his
opti
on, pre
ss b
. N
ext
pre
ss v
or V
to
sele
ct P
rog
ress
ive
(rec
om
men
ded
for
stil
l im
ages
and t
ext)
.
Thi
s op
tion
only
app
ears
and
can
onl
y be
adj
uste
d if
“Pi
ctur
e M
ode”
is s
et to
“Pe
rson
al”.
DR
C P
alet
teT
his
optio
n al
low
s yo
u to
cus
tom
ise
the
leve
l of d
etai
l (R
ealit
y) a
nd s
moo
thne
ss (C
lari
ty) f
or u
p to
th
ree
inpu
t sou
rces
. Aft
er s
elec
ting
this
opt
ion
pres
s b
. Nex
t, pr
ess v
or V
, to
adju
st R
ealit
y (a
s hi
gher
as
the
mar
k is
alo
ng th
e R
ealit
y ax
is, t
he p
ictu
re b
ecom
es m
ore
deta
iled)
and
pre
ss B
or
b to
adj
ust C
lari
ty (
as y
ou m
ove
to th
e ri
ght,
alon
g th
e C
lari
ty a
xis,
the
pict
ure
beco
mes
sm
ooth
er).
Fin
ally
, pre
ss O
K to
sto
re.
Thi
s op
tion
only
app
ears
and
can
onl
y be
adj
uste
d if
“Pi
ctur
e M
ode”
is s
et to
“Pe
rson
al”.
– 10 –
XS1RM-Y1010
Th
e S
ou
nd
Ad
just
men
t M
enu
The
“So
und
Adj
ustm
ent”
men
u al
low
s yo
u to
al
ter
the
soun
d se
tting
s.
To
do t
his:
Pr
ess
the
ME
NU
but
ton
and
pres
s v
to s
elec
t , t
hen
pres
s O
K to
ent
er th
is m
enu.
Nex
t, pr
ess v
or V
to s
elec
t the
des
ired
opt
ion
and
pres
s O
K. F
inal
ly, r
ead
belo
w h
ow to
ope
rate
in
to e
ach
optio
n.
Soun
dT
his
optio
n al
low
s yo
u to
cus
tom
ise
the
Soun
d E
ffec
t. A
fter
sel
ectin
g th
isE
ffec
top
tion
pres
s O
K. N
ext,
pres
s re
peat
edly
v o
r V
to s
elec
t:
Dol
by*
(Dol
by V
irtu
al, s
imul
ates
the
soun
d ef
fect
of
“Dol
by S
urro
und
Pro
Vir
tual
L
ogic
”).
Nat
ural
(Enh
ance
s cl
arity
, det
ail a
nd p
rese
nce
of s
ound
by
usin
g “B
BE
Hig
h D
efin
ition
Sou
nd s
yste
m”*
*).
Dyn
amic
(“B
BE
Hig
h D
efin
ition
Sou
nd s
yste
m”*
* in
tens
ifie
s cl
arity
and
pre
senc
e of
sou
nd f
or b
ette
r in
telli
gibi
lity
and
mus
ical
rea
lism
).
Off
(Fla
t res
pons
e).
Onc
e yo
u ha
ve s
elec
ted
your
des
ired
opt
ion,
pre
ss O
K to
sto
re.
Tre
ble
Pres
s B
or b
to d
ecre
ase
or to
incr
ease
hig
her-
freq
uenc
y so
unds
. Nex
t, pr
ess
OK
to
stor
e.
Bas
sPr
ess B
or b
to d
ecre
ase
or to
incr
ease
the
low
er-f
requ
ency
sou
nds.
Nex
t, pr
ess
OK
to
sto
re.
Bal
ance
Pres
s B
or b
to e
mph
asis
e th
e le
ft o
r th
e ri
ght s
peak
er. N
ext,
pres
s O
K to
sto
re.
Res
etPr
ess
OK
to r
eset
the
soun
d to
the
fact
ory
pres
et le
vels
.
Dua
l Pr
ess b
. Nex
t:So
und
•Fo
r a
Ster
eo b
road
cast
:Pr
ess v
or V
to s
elec
t Ste
reo
or M
ono.
Nex
t pre
ss O
K to
sto
re.
•Fo
r a
bilin
gual
bro
adca
st:
Pres
s v
or V
to s
elec
t Mon
o (f
or m
ono
chan
nel i
f ava
ilabl
e), A
(for
cha
nnel
1) o
r B
(for
cha
nnel
2).
Nex
t pre
ss O
K to
sto
re.
Aut
o Pr
ess b
. Nex
t pre
ss v
or V
to s
elec
t On
(the
vol
ume
leve
l of
the
chan
nels
will
Vol
ume
stay
the
sam
e, in
depe
nden
t of
the
broa
dcas
t sig
nal,
e.g.
in th
e ca
se o
f ad
vert
isem
ents
) or
Off
(the
vol
ume
leve
l cha
nges
acc
ordi
ng to
the
broa
dcas
t sig
nal)
. Nex
t pre
ss O
K to
st
ore.
If y
ou s
elec
t “D
olby
Vir
tual
” on
the
“Sou
nd E
ffec
t” o
ptio
n, th
e “A
uto
Vol
ume”
opt
ion
will
au
tom
atic
ally
be
switc
hed
to “
Off
”.
cont
inue
d...
,
mSound
Adjustm
ent
SoundEffect:
DolbyVirtual
Treble:
Bass:
Balance:
Reset
DualSound:
Stereo
AutoVolume:
Off
TVSpeakers:
Main
AudioOutput:
Fix
Select:
Enter:
OK
Exit:M
ENU
Picture
Adjustment
Picture
Mode:
Live
Contrast:
Reset:
NoiseReduction:
Auto
ColourTone:
Cold
Select:
Enter:
OK
Exit:MENU
Sound
Adjustm
ent
SoundEffect:
DolbyVirtual
Treble:
Bass:
Balance:
Reset
DualSound:
Stereo
AutoVolume:
Off
TVSpeakers:
Main
AudioOutput:
Fix
Select:
Back:
Enter:
OK
ME
NU
TV
Spe
aker
sT
his
optio
n al
low
s yo
u to
sel
ect i
f you
wan
t to
liste
n th
e T
V fr
om th
e T
V s
peak
ers
or fr
om a
n ex
tern
al
ampl
ifie
r co
nnec
ted
to th
e au
dio
outp
uts
on th
e re
ar o
f th
e T
V.
Aft
er s
elec
ting
this
opt
ion,
pre
ss b
. Nex
t pre
ss r
epea
tedl
y v
or V
to s
elec
t:
M
ain
to li
sten
the
TV
fro
m th
e T
V s
et s
peak
ers.
Off
to li
sten
to th
e T
V f
rom
an
exte
rnal
am
plif
ier.
Onc
e yo
u ha
ve s
elec
ted
your
des
ired
opt
ion,
pre
ss O
K to
sto
re.
If y
ou h
ave
sele
cted
"O
ff",
the
volu
me
of th
e ex
tern
al e
quip
men
t can
als
o be
alte
red
by p
ress
ing
the
2 +
/-
butto
ns o
f the
rem
ote
cont
rol.
Whe
n th
e vo
lum
e bu
ttons
are
pre
ssed
, the
sym
bol %
will
app
ear i
ndic
atin
g th
at
the
volu
me
you
are
alte
ring
is n
ot th
e vo
lum
e of
the
TV
set
spe
aker
s, it
is f
rom
the
exte
rnal
equ
ipm
ent.
Au
dio
Ou
tpu
tT
his
opti
on a
llow
s you t
o s
elec
t how
to c
ontr
ol
the
volu
me
of
the
TV
’s s
epak
ers
when
an e
xte
rnal
am
pli
fier
is
connec
ted t
o t
he
TV
’s a
udio
outp
ut
sock
ets.
Aft
er s
elec
ting t
his
opti
on,
pre
ss b
. N
ext
pre
ss v
or V
to
sel
ect
Vari
ab
le (
if y
ou w
ish t
o u
se t
he
TV
’s r
emote
contr
ol)
or
Fix
(if
you w
ish t
o
use
the
exte
rnal
am
pli
fier
’s r
emo
te c
on
tro
l).
*M
anuf
actu
red
unde
r lic
ense
from
Dol
by L
abor
ator
ies.
“D
olby
” an
d th
e do
uble
-D s
ymbo
l a
re tr
adem
arks
of
Dol
by L
abor
ator
ies.
**T
his
TV
has
bee
n de
sign
ed to
cre
ate
surr
ound
sou
nd e
ffec
t by
sim
ulat
ing
the
soun
d of
fou
r sp
eake
rs w
ith tw
o sp
eake
rs, w
hen
the
broa
dcas
t aud
io s
igna
l is
Dol
by S
urro
und
enco
ded.
The
sou
nd e
ffec
t can
als
o be
impr
oved
by
con
nect
ing
a su
itabl
e ex
tern
al a
mpl
ifie
r (f
or d
etai
ls r
efer
to p
age
39).
**T
he “
BB
E H
igh
Def
initi
on S
ound
sys
tem
” is
man
ufac
ture
d by
Son
y C
orpo
ratio
n un
der
licen
se f
rom
BB
E
Soun
d, I
nc. I
t is
cove
red
by U
.S. P
aten
t No.
4,6
38,2
58 a
nd N
o. 4
,482
,866
. The
wor
d “B
BE
” an
d B
BE
Sym
bol
are
trad
emar
ks o
f B
BE
Sou
nd, I
nc.
– 11 –
XS1RM-Y1010
Th
e F
eatu
res
Men
uT
he “
Feat
ures
” m
enu
allo
ws
you
to a
lter
vari
ous
setti
ngs
of th
e T
V.
To
do t
his:
Pres
s th
e M
EN
U b
utto
n an
d pr
ess v
twic
e to
se
lect
, t
hen
pres
s O
K to
ent
er th
is m
enu.
N
ext,
pres
s v
or V
to s
elec
t the
des
ired
opt
ion
and
pres
s O
K. F
inal
ly, r
ead
belo
w h
ow to
op
erat
e in
to e
ach
optio
n.
PO
WE
R S
AV
ING
This
opti
on a
llow
s you t
o r
educe
the
pow
er c
onsu
mpti
on o
f th
is T
V.
To d
o t
his
:
Aft
er s
elec
ting the
opti
on, p
ress
OK
. Then
, pre
ss v
or V
to
sel
ect R
edu
ce. N
ext,
pre
ss O
K to
sto
re.
AU
TO
FO
RM
AT
Thi
s op
tion
allo
ws
you
to a
utom
atic
ally
cha
nge
the
aspe
ct r
atio
of
the
scre
en.
To
do t
his:
A
fter
sel
ectin
g th
e op
tion,
pre
ss O
K. T
hen,
pre
ss v
or V
to s
elec
t On
(if
you
wis
h th
e T
V s
et to
au
tom
atic
ally
sw
itch
the
scre
en f
orm
at a
ccor
ding
to th
e br
oadc
ast s
igna
l) o
r Off
(if
you
wis
h to
ke
ep y
our
pref
eren
ce).
Fin
ally
, pre
ss O
K to
sto
re.
Eve
n if
you
hav
e se
lect
ed “
On”
or “
Off
”, y
ou c
an a
lway
s m
odif
y th
e fo
rmat
of t
he s
cree
n by
pr
essi
ng
rep
eate
dly
on th
e re
mot
e co
ntro
l to
sele
ct o
ne o
f th
e fo
llow
ing
form
ats:
SMA
RT
:Im
itatio
n of
wid
e sc
reen
eff
ect f
or 4
:3 b
road
cast
.
4/3:
Con
vent
iona
l 4:3
pic
ture
siz
e, f
ull p
ictu
re
info
rmat
ion.
14/9
:C
ompr
omis
e be
twee
n 4:
3 an
d 16
:9 p
ictu
re s
ize.
ZO
OM
:W
ides
cree
n fo
rmat
for
lette
rbox
mov
ies.
WID
E:
For
16:9
bro
adca
st. F
ull p
ictu
re in
form
atio
n.
• In
“SM
AR
T”,
“Z
OO
M”
and
“14/
9” m
odes
, par
ts o
f th
e to
p an
d bo
ttom
of t
he s
cree
n ar
e cu
t off
. Pre
ss v
or V
to a
djus
t the
pos
ition
of
the
imag
e on
the
scre
en (
e.g.
to r
ead
subt
itles
).•
Acc
ordi
ng to
the
form
at o
f di
ffus
sion
, bla
ck b
ands
can
alw
ays
appe
ar w
hate
ver
the
sele
cted
mod
e.
,
m
Picture
Adjustment
Picture
Mode:
Live
Contrast:
Reset:
NoiseReduction:
Auto
ColourTone:
Cold
Select:
Enter:
OK
Exit:MENU
Select:
Enter:
OK
Exit:MENU
Features Powersaving
Reduce
AutoForm
at
On
Film
Mode
Auto
AV2Output
TV
AV3Output
TV
SmartLink
Output
ConnectionGuide
RGBCentering
ScreenSaver
LogoIllumination
Yes
Features Powersaving
Reduce
AutoForm
at
On
Film
Mode
Auto
AV2Output
TV
AV3Output
TV
SmartLink
Output
ConnectionGuide
RGBCentering
ScreenSaver
LogoIllumination
Yes
Select:
Back:
Enter::OK
ME
NU
4:3
ZO
OM
14:9
WID
E
SM
AR
T
cont
inue
d...
FIL
M M
OD
ET
his
opti
on i
s se
t to
Au
to t
o i
mp
rov
e th
e q
ual
ity
of
the
pic
ture
s in
mov
emen
t o
f th
e fi
lms.
To c
ance
l th
is f
un
ctio
n,
pre
ss v
or V
to s
elec
t O
ff. Fi
nally
, pre
ss O
K to
sto
re.
AV
2 O
UT
PU
T /
AV
3 O
UT
PU
TT
he "
AV
2 O
uptu
t" a
nd "
AV
3 O
utpu
t" o
ptio
ns a
llow
s yo
u to
sel
ect t
he s
ourc
e to
be
outp
ut fr
om th
e Sc
art c
onne
ctor
s 3/
and
2/
2 so
that
you
can
rec
ord
fro
m th
ese
Scar
t any
sig
nal c
omin
g fr
om th
e T
V o
r fr
om a
n ex
tern
al e
quip
men
t con
nect
ed to
the
Scar
t con
nect
or
1/,
2/ a
nd
3/ o
r si
de c
onne
ctor
s 5
or
5 an
d 5.
If y
our
VC
R o
r D
VD
rec
orde
r su
ppor
ts S
mar
tLin
k, th
is p
roce
dure
is n
ot n
eces
sary
.
To
do t
his:
O
nce
you
have
ent
ered
into
the
"Fea
ture
s" m
enu
as it
is e
xpla
ined
in th
e pr
evio
us p
age
and
afte
r sel
ectin
g th
e op
tion,
pr
ess
OK
. The
n pr
ess v
or V
to s
elec
t the
des
ired
out
put s
igna
l:T
V
to o
utpu
t the
aer
ial s
ourc
e.A
V1
to o
utpu
t sou
rces
con
nect
ed to
1/
.A
V2
to o
utpu
t sou
rces
con
nect
ed to
2/
(on
ly f
or A
V3
Out
put)
.A
V3
to o
utpu
t sou
rces
con
nect
ed to
3/
(on
ly f
or A
V2
Out
put)
.A
V5
to o
utpu
t sou
rces
con
nect
ed to
5
or
5 an
d 5.
AU
TO
to
out
put t
he s
igna
l tha
t is
bein
g vi
ewed
on
the
TV
.
•If
you
sel
ect “
AU
TO
”, th
e ou
tput
sig
nal w
ill a
lway
s be
the
sam
e on
e th
at is
dis
play
ed o
n th
e sc
reen
.•
If y
ou h
ave
conn
ecte
d a
deco
der t
o th
e Sc
art
2/ o
r 3/
3 or
to a
VC
R c
onne
cted
to o
ne o
f the
se
Scar
ts, p
leas
e re
mem
ber
to c
hang
e ba
ck th
e "A
V2
Out
put"
or
“AV
3 O
utpu
t” to
“T
V”
for
corr
ect
unsc
ram
blin
g.
SM
AR
TL
INK
Bot
h Sc
art c
onne
ctor
s 2/
and
3/
sup
port
Sm
artL
ink,
but
they
can
not s
uppo
rt S
mar
tLin
k at
the
sam
e tim
e. T
his
optio
n al
low
s yo
u to
sel
ect w
hich
of
the
Scar
t con
nect
ors
you
wan
t to
supp
ort S
mar
tLin
k.
To
do t
his:
Onc
e yo
u ha
ve e
nter
ed th
e "F
eatu
res"
men
u as
it is
exp
lain
ed in
the
prev
ious
pag
e an
d af
ter s
elec
ting
the
optio
n, p
ress
O
K. T
hen
pres
s v
or V
to s
elec
t AV
2 or
AV
3. F
inal
ly p
ress
OK
to s
tore
.
CO
NN
EC
TIO
N G
UID
E
Eve
n yo
u ha
ve a
lrea
dy c
onne
cted
the
exte
rnal
equ
ipm
ent t
o th
e T
V s
et, i
t is
impo
rtan
t for
you
to f
ollo
w th
e in
stru
ctio
ns o
f th
is m
enu.
If
you
proc
eed
in th
is w
ay, y
ou w
ill g
et th
e op
timum
pic
ture
set
tings
rel
ated
with
the
optio
nal e
quip
men
t.
To
do t
his:
1O
nce
you
have
ent
ered
the
"Fea
ture
s" m
enu
as it
is e
xpla
ined
in th
e pr
evio
us p
age
and
afte
r se
lect
ing
the
optio
n,
pres
s O
K. N
ext p
ress
v o
r V
to c
hose
the
equi
pmen
t you
wan
t to
conn
ect a
mon
g th
e av
aila
ble:
SA
T (
sate
llite
),
Dec
oder
, DV
D, G
AM
E, V
IDE
O o
r D
VD
rec
. (D
VD
rec
orde
r). N
ext p
ress
b to
sel
ect t
he e
quip
men
t cho
sen
(equ
ipm
ent s
elec
ted
also
can
be
dele
ted
by p
ress
ing B
). O
nce
you
have
sel
ecte
d al
l the
equ
ipm
ent t
o be
con
nect
ed,
pres
s v
or V
to s
elec
t "C
onfi
rm"
and
pres
s O
K.
2A
new
men
u w
ill a
ppea
r sh
owin
g yo
u on
whi
ch S
cart
con
nect
or o
f th
e re
ar o
f th
e T
V s
houl
d be
con
nect
ed e
ach
equi
pmen
t. Pl
ease
con
nect
eac
h eq
uipm
ent a
ccor
ding
to th
is in
form
atio
n to
get
the
optim
um p
ictu
re s
ettin
g of
the
optio
nal e
quip
men
t.
We
stro
ngly
reco
mm
end
you
to fo
llow
our
con
nect
ion
prop
osal
s, b
ut in
cas
e yo
u do
not
agr
ee p
ress
B o
r b
to s
elec
t "N
o" a
nd n
ext p
ress
the
OK
but
ton.
A n
ew m
enu
appe
ars
on th
e sc
reen
in w
hich
you
can
ass
ign
the
conn
ectio
ns a
ccor
ding
to y
our
pref
eren
ces.
3O
nce
you
have
con
nect
ed th
e op
tiona
l equ
ipm
ent,
pres
s B
or b
to s
elec
t "O
K"
and
fina
lly p
ress
the
OK
but
ton
of th
e re
mot
e co
ntro
l.
S
SS
S
S
S
S
cont
inue
d...
– 12 –
XS1RM-Y1010
RG
B C
EN
TR
ING
Thi
s op
tion
is o
nly
avai
labl
e if
an
RG
B s
ourc
e ha
s be
en c
onne
cted
to th
e Sc
art c
onne
ctor
s 1/
or
2/ o
n th
e re
ar o
f T
V.
Whe
n vi
ewin
g an
RG
B s
igna
l, th
e pi
ctur
e m
ay n
eed
som
e ad
just
ing.
Thi
s op
tion
allo
ws
you
to a
djus
t the
hor
izon
tal
pict
ure
posi
tion
so th
at th
e pi
ctur
e is
in th
e m
iddl
e of
the
scre
en.
To
do t
his:
O
nce
you
have
ent
ered
the
"Fea
ture
s" m
enu
as it
is e
xpla
ined
in o
n pa
ge 2
2 an
d w
hile
wat
chin
g an
RG
B s
ourc
e se
lect
th
e “R
GB
Cen
trin
g” o
ptio
n an
d pr
ess
OK
. The
n pr
ess v
or V
to a
djus
t the
cen
tre
of th
e pi
ctur
e be
twee
n –1
5 an
d +
15. F
inal
ly p
ress
OK
to c
onfi
rm a
nd s
tore
.
SC
RE
EN
SA
VE
R
This
sub m
enu a
llow
s you t
o r
educe
the
imag
e re
tenti
on.
If th
e fo
llo
win
g i
mag
es a
re d
isp
lay
ed f
or
an e
xte
nd
ed p
erio
d tim
e, i
mag
e re
ten
tio
n (
afte
rim
age)
in
are
as o
f th
e sc
reen
may
res
ult
due
to t
he
char
acte
rist
ics
of
this
dis
pla
y p
anel
:
• B
lack
bar
s at
the
top a
nd b
ott
om
that
appea
r w
ith a
wid
e vid
eo s
ourc
e (l
ette
rbox p
ictu
re).
• B
lack
bar
s to
the
left
and r
ight
that
appea
r w
ith a
4:3
vid
eo s
ourc
e (c
onven
tional
TV
bro
adca
st).
• V
ideo
gam
e so
urc
es.
• P
C i
mag
es.
• D
VD
on-s
cree
n m
enu d
ispla
ys.
• O
n-s
cree
n m
enus,
chan
nel
num
ber
s, e
tc..of
connec
ted e
qu
ipm
ent
such
as
Set
Top B
ox, ca
ble
modem
, V
CR
, et
c...
To
do t
his:
Once
you h
ave
ente
red t
he
“Fea
ture
s” m
enu a
s it
is
expla
ined
on p
age
22 a
nd a
fter
sel
ecti
ng t
he
opti
on, pre
ss O
K.
Nex
t pre
ss v
or V
to
sel
ect:
All
Wh
ite
Sel
ect
this
opti
on a
nd p
ress
OK
. N
ext
pre
ss v
or V
to s
elec
t O
n t
o t
urn
the
scre
en t
o w
hit
e.
•T
his
fu
nct
ion
fin
ish
es a
uto
mat
ical
ly a
fter
30
min
ute
s. I
f im
age
rete
nti
on
is
stil
l pre
sent,
re
pea
t th
e ab
ove.
• T
o c
ance
l th
is f
unct
ion h
alfw
ay, pre
ss a
ny b
utt
ons
(exce
pt
the
sound r
elat
ed b
utt
ons)
on
th
e re
mote
contr
ol.
Orb
itS
elec
t th
is o
pti
on a
nd p
ress
OK
. N
ext
pre
ss v
or V
to s
elec
t O
n t
o m
ove
the
pic
ture
posi
tion.
LO
GO
ILL
UM
INA
TIO
NT
his
op
tion a
llow
s you t
o i
llum
inat
e th
e S
ON
Y l
ogo l
oca
ted o
n t
he
front
of
the
TV
.
To d
o t
his
:
Once
you h
ave
ente
red t
he
“Fea
ture
s” m
enu a
s it
is
expla
ined
on p
age
22 a
nd a
fter
sel
ecti
ng t
he
opti
on, pre
ss O
K.
Nex
t pre
ss v
or V
to
sel
ect
Yes
if
you w
ant
to i
llum
inat
e th
e S
ony l
ogo i
n b
lue.
Fin
ally
pre
ss O
K t
o s
tore
.
Th
e S
et U
p M
enu
The
“Se
t Up”
men
u al
low
s yo
u to
alte
r var
ious
op
tions
on
this
TV
.
To
do t
his:
Pr
ess
the
ME
NU
but
ton
and
pres
s v
four
tim
es
to s
elec
t , t
hen
pres
s O
K to
ent
er th
is m
enu.
N
ext,
pres
s v
or V
to s
elec
t the
des
ired
opt
ion
and
pres
s O
K. F
inal
ly, r
ead
belo
w h
ow to
op
erat
e in
to e
ach
optio
n.
LA
NG
UA
GE
Thi
s op
tion
allo
ws
you
to s
elec
t the
lang
uage
that
men
us a
re d
ispl
ayed
in.
To
do t
his:
A
fter
sel
ectin
g th
e op
tion,
pre
ss O
K a
nd th
en p
roce
ed in
the
sam
e w
ay a
s in
ste
p 3
of th
e se
ctio
n "S
witc
hing
On
the
TV
and
Aut
omat
ical
ly T
unin
g" o
n pa
ge 1
5.
CO
UN
TR
YT
his
optio
n al
low
s yo
u to
sel
ect t
he c
ount
ry in
whi
ch y
ou w
ish
to o
pera
te th
e T
V s
et.
To
do t
his:
A
fter
sel
ectin
g th
e op
tion,
pre
ss O
K a
nd th
en p
roce
ed in
the
sam
e w
ay a
s in
ste
p 4
of th
e se
ctio
n "S
witc
hing
On
the
TV
and
Aut
omat
ical
ly T
unin
g" o
n pa
ge 1
5.
AU
TO
TU
NIN
GT
his
optio
n al
low
s yo
u to
aut
omat
ical
ly s
earc
h fo
r an
d st
ore
all a
vaila
ble
TV
cha
nnel
s.
To
do t
his:
A
fter
sel
ectin
g th
e op
tion,
pre
ss O
K a
nd th
en p
roce
ed in
the
sam
e w
ay a
s in
the
step
s 7
and
8 of
th
e se
ctio
n “S
witc
hing
On
the
TV
and
Aut
omat
ical
ly T
unin
g” o
n pa
ge 1
6.
PR
OG
RA
MM
E S
OR
TIN
GT
his
optio
n al
low
s yo
u to
cha
nge
the
orde
r in
whi
ch th
e ch
anne
ls (
TV
Bro
adca
st)
appe
ar o
n th
e sc
reen
.
To
do t
his:
A
fter
sel
ectin
g th
e op
tion,
pre
ss O
K a
nd th
en p
roce
ed in
the
sam
e w
ay a
s in
the
step
9 o
f the
sec
tion
“Sw
itchi
ng O
n th
e T
V a
nd A
utom
atic
ally
Tun
ing”
on
page
16.
,
m
Picture
Adjustment
Picture
Mode:
Live
Contrast:
Reset:
NoiseReduction:
Auto
ColourTone:
Cold
Select:
Enter:
OK
Exit:MENU
Select:
Exit:MENU
SetUp
Language
English
Country
Off
AutoTuning
ProgrammeSorting
ProgrammeLabels
AVPreset
ManualProgrammePreset
Enter:
OK
SetUp
Language
English
Country
Off
AutoTuning
ProgrammeSorting
ProgrammeLabels
AVPreset
ManualProgrammePreset
Select:
Back:
Enter:
OK
ME
NU
cont
inue
d...
– 13 –
XS1RM-Y1010
PR
OG
RA
MM
E L
AB
EL
ST
his
optio
n al
low
s yo
u to
nam
e a
chan
nel u
sing
up
to f
ive
char
acte
rs (
lette
rs o
r nu
mbe
rs).
To
do t
his:
1
Onc
e yo
u ha
ve e
nter
ed th
e "S
et U
p" m
enu
as it
is e
xpla
ined
in th
e pr
evio
us p
age
and
afte
r se
lect
ing
this
opt
ion,
pr
ess
OK
, the
n pr
ess v
or V
to s
elec
t the
pro
gram
me
num
ber w
ith th
e ch
anne
l you
wis
h to
nam
e. N
ext p
ress
OK
.
2W
ith th
e fi
rst e
lem
ent o
f th
e L
abel
col
umn
high
light
ed, p
ress
OK
and
v, V
, B o
r b
to s
elec
t the
lette
r, n
ext
pres
s O
K.
Whe
n yo
u ha
ve f
inis
hed,
pre
ss v
, V, B
or b
to s
elec
t the
wor
d “E
nd”
on th
e sc
reen
and
fin
ally
pre
ss O
K to
tu
rn o
ff th
e m
enu
from
the
scre
en.
• T
o co
rrec
t a le
tter,
sel
ect "
%"
on th
e sc
reen
to g
o ba
ck a
nd p
ress
OK
.
• Fo
r a
blan
k, s
elec
t ""
on th
e sc
reen
and
pre
ss O
K.
AV
PR
ES
ET
Thi
s op
tion
allo
ws
you
to:
a)
Des
igna
te a
nam
e to
the
exte
rnal
equ
ipm
ent y
ou h
ave
conn
ecte
d to
the
inpu
t soc
kets
of
the
TV
set
.
To
do t
his:
1O
nce
you
have
ent
ered
the
"Set
Up"
men
u as
it is
exp
lain
ed in
the
prev
ious
pag
e an
d af
ter s
elec
ting
this
opt
ion,
pr
ess
OK
, the
n pr
ess v
or V
to s
elec
t the
inpu
t sou
rce
you
wis
h to
nam
e: A
V1,
AV
2, A
V3
or A
V4
for
the
rear
Sca
rts
and
AV
5 fo
r si
de c
onne
ctor
s. N
ext p
ress
OK
twic
e.
2 A
labe
l aut
omat
ical
ly a
ppea
rs in
the
labe
l col
umn:
a) I
f you
wan
t to
use
one
of th
e pr
edef
ined
labe
ls, p
ress
v o
r V to
sel
ect t
he d
esir
ed la
bel a
nd fi
nally
pre
ss O
K.
The
tota
l pre
defi
ned
labe
ls a
re: V
IDE
O, D
VD
, CA
BL
E, G
AM
E, C
AM
(ca
mco
rder
) or
SA
T
(sat
ellit
e).
b) I
f you
wan
t to
set a
dif
fere
nt la
bel,
sele
ct E
dit a
nd p
ress
OK
. The
n, w
ith th
e fi
rst e
lem
ent h
ighl
ight
ed, p
ress
v
, V, B
or b
to s
elec
t the
lette
r, n
ext p
ress
OK
. Whe
n yo
u ha
ve f
inis
hed,
pre
ss v
, V, B
or b
to s
elec
t th
e w
ord
“End
” on
the
scre
en a
nd f
inal
ly p
ress
OK
to tu
rn o
ff th
e m
enu
from
the
scre
en.
• T
o co
rrec
t the
lette
r, s
elec
t "%
" on
the
scre
en to
go
back
and
pre
ss O
K.
• Fo
r a
blan
k, s
elec
t ""
on th
e sc
reen
and
pre
ss O
K.
b)
Cha
nge
the
inpu
t sou
nd le
vel o
f th
e op
tiona
l equ
ipm
ent c
onne
cted
.
To
do t
his:
Onc
e yo
u ha
ve e
nter
ed th
e "S
et U
p" m
enu
as it
is e
xpla
ined
in th
e pr
evio
us p
age
and
afte
r se
lect
ing
this
opt
ion
pres
s O
K, t
hen
pres
s v
or V
to s
elec
t the
inpu
t sou
rce
you
wan
t to
alte
r the
inpu
t sou
nd le
vel:
AV
1, A
V2,
AV
3 or
AV
4 fo
r th
e re
ar S
cart
s an
d A
V5
for
side
con
nect
ors.
Nex
t pre
ss tw
ice b
to h
ighl
ight
the
Soun
d O
ffse
t co
lum
n. F
inal
ly p
ress
OK
and
v o
r V
to a
lter
the
inpu
t sou
nd le
vel b
etw
een
-9 a
nd +
9.
cont
inue
d...
MA
NU
AL
PR
OG
RA
MM
E P
RE
SE
TT
his
optio
n al
low
s yo
u to
:
a)Pr
eset
cha
nnel
s or
the
VC
R c
hann
el o
ne b
y on
e to
the
prog
ram
me
orde
r of
you
r ch
oice
.
To
do t
his:
1O
nce
you
have
ent
ered
the
“Set
Up”
men
u as
it is
exp
lain
ed o
n pa
ge 2
6 an
d af
ter
sele
ctin
g th
e "M
anua
l Pr
ogra
mm
e Pr
eset
" op
tion,
pre
ss O
K. N
ext w
ith P
rogr
amm
e op
tion
high
light
ed p
ress
OK
.Pr
ess v
or V
to s
elec
t whi
ch p
rogr
amm
e nu
mbe
r yo
u w
ant t
o pr
eset
the
chan
nel o
n (f
or V
CR
, sel
ect
prog
ram
me
num
ber
“0”)
. The
n pr
ess B
.
2T
he f
ollo
win
g op
tion
is o
nly
avai
labl
e de
pend
ing
on th
e co
untr
y yo
u ha
ve s
elec
ted
in th
e “C
ount
ry”
men
u.A
fter
sel
ectin
g th
e Sy
stem
opt
ion,
pre
ss O
K. T
hen
pres
s v
or V
to
sele
ct th
e T
V B
road
cast
sys
tem
(B
/G
for
wes
tern
Eur
opea
n co
untr
ies,
D/K
for
eas
tern
Eur
opea
n co
untr
ies,
L fo
r Fra
nce
or I
for U
nite
d K
ingd
om).
T
hen
pres
s B
.
3A
fter
sel
ectin
g th
e C
hann
el N
umbe
r op
tion,
pre
ss O
K. N
ext p
ress
v o
r V to
sel
ect t
he c
hann
el tu
ning
("C
" fo
r ter
rest
rial
cha
nnel
s or
"S"
for c
able
cha
nnel
s). T
hen
pres
s th
e nu
mbe
r but
tons
to e
nter
dir
ectly
the
chan
nel
num
ber o
f the
TV
Bro
adca
st o
r the
cha
nnel
of t
he V
CR
sig
nal.
If y
ou d
o no
t kno
w th
e ch
anne
l num
ber,
pre
ss
b a
nd v
or V
to s
earc
h fo
r it.
Whe
n yo
u ha
ve tu
ned
the
desi
red
chan
nel,
pres
s O
K tw
ice
to s
tore
.
Rep
eat a
ll th
e ab
ove
step
s to
tune
and
sto
re m
ore
chan
nels
.
b)
Lab
el a
cha
nnel
usi
ng u
p to
fiv
e ch
arac
ters
.
To
do t
his:
O
nce
you
have
ent
ered
the
“Set
Up”
men
u as
it is
exp
lain
ed o
n pa
ge 2
6 an
d af
ter
sele
ctin
g th
e "M
anua
l Pr
ogra
mm
e Pr
eset
" op
tion,
pre
ss O
K. N
ext w
ith th
e P
rogr
amm
e op
tion,
hig
hlig
hted
pre
ss th
e P
RO
G +
/- b
utto
n to
sel
ect t
he p
rogr
amm
e nu
mbe
r w
ith th
e ch
anne
l you
wis
h to
nam
e. W
hen
the
prog
ram
me
you
wan
t to
nam
e ap
pear
s on
the
scre
en, p
ress
v o
r V
to s
elec
t the
Lab
el o
ptio
n an
d pr
ess
OK
. The
n, w
ith th
e fi
rst e
lem
ent
high
light
ed, p
ress
v, V
, B o
r b
to s
elec
t the
lette
r, n
ext p
ress
OK
. Whe
n yo
u ha
ve f
inis
hed,
pre
ss v
, V, B
or
b to
sel
ect t
he w
ord
“End
” on
the
scre
en a
nd fi
nally
pre
ss O
K to
turn
off
the
men
u fr
om th
e sc
reen
. Fin
ally
pre
ss
OK
to s
tore
.
• T
o co
rrec
t a le
tter,
sel
ect "
%"
on th
e sc
reen
to g
o ba
ck a
nd p
ress
OK
.•
For
a bl
ank,
sel
ect "
" on
the
scre
en a
nd p
ress
OK
.
c)Fi
ne tu
ne th
e br
oadc
ast r
ecep
tion.
Nor
mal
ly th
e au
tom
atic
fin
e tu
ning
(A
FT)
will
giv
e th
e be
st p
ossi
ble
pict
ure,
ho
wev
er y
ou c
an m
anua
lly f
ine
tune
the
TV
to o
btai
n a
bett
er p
ictu
re r
ecep
tion
in c
ase
the
pict
ure
is d
isto
rted
.
To
do t
his:
W
hile
wat
chin
g th
e ch
anne
l (T
V B
road
cast
) you
wis
h to
fine
tune
, and
onc
e yo
u ha
ve e
nter
ed th
e “S
et U
p” m
enu
as it
is e
xpla
ined
on
page
26
and
afte
r se
lect
ing
the
"Man
ual P
rogr
amm
e" o
ptio
n, p
ress
OK
. The
n pr
ess v
or V
to
sel
ect t
he A
FT
opt
ion
and
pres
s b
. Nex
t pre
ss v
or V
to a
djus
t the
fine
tuni
ng b
etw
een
-15
and
+15
. Fin
ally
pr
ess
OK
twic
e to
sto
re.
cont
inue
d...
– 14 –
XS1RM-Y1010
d)
Skip
any
unw
ante
d pr
ogra
mm
e nu
mbe
rs w
hen
they
are
sel
ecte
d w
ith th
e P
RO
G +
/- b
utto
ns.
To
do t
his:
O
nce
you
have
ent
ered
the
"Set
Up"
men
u as
it is
exp
lain
ed o
n pa
ge 2
6 an
d af
ter
sele
ctin
g th
e "M
anua
l Pr
ogra
mm
e Pr
eset
" op
tion,
pre
ss O
K. N
ext w
ith th
e P
rogr
amm
e op
tion
high
light
ed, p
ress
the
PR
OG
+/-
but
ton
to s
elec
t the
pro
gram
me
num
ber y
ou w
ant t
o sk
ip. W
hen
the
prog
ram
me
you
wan
t to
skip
app
ears
on
the
scre
en,
pres
s v
or V
to s
elec
t the
Ski
p op
tion
and
pres
s b
. Nex
t pre
ss v
or V
to s
elec
t On.
Fin
ally
pre
ss O
K tw
ice
to
conf
irm
and
sto
re.
To c
ance
l thi
s fu
nctio
n af
terw
ards
, sel
ect “
Off”
inst
ead
of “
On”
in th
e st
ep a
bove
.
e) V
iew
and
rec
ord
scra
mbl
ed c
hann
els
(e.g
. fro
m a
pay
TV
dec
oder
) w
hen
usin
g a
deco
der
conn
ecte
d to
Sca
rt
3/ d
irec
tly o
r th
roug
h a
VC
R.
T
his
optio
n is
onl
y av
aila
ble
depe
ndin
g on
the
coun
try
you
have
sel
ecte
d in
the
“Cou
ntry
” m
enu.
To
do t
his:
Onc
e yo
u ha
ve e
nter
ed th
e "S
et U
p" m
enu
as it
is e
xpla
ined
on
page
26
and
afte
r se
lect
ing
the
"Man
ual
Prog
ram
me
Pres
et"
optio
n, p
ress
OK
. Nex
t pre
ss v
or V
to s
elec
t the
Dec
oder
opt
ion
and
pres
s b
. Nex
t pre
ss
v o
r V
to s
elec
t On.
Fin
ally
pre
ss O
K tw
ice
to c
onfi
rm a
nd s
tore
.
To c
ance
l thi
s fu
nctio
n af
terw
ards
, sel
ect "
Off"
inst
ead
of "
On"
in th
e st
ep a
bove
.
S
Ab
ou
t "M
emo
ry S
tick
"A
"M
emor
y St
ick"
* is
a n
ew re
cord
ing
med
ium
with
a d
ata
capa
city
that
exc
eeds
a fl
oppy
dis
k. I
t is
spec
ially
desi
gned
for
exc
hang
ing
and
shar
ing
digi
tal d
ata
amon
g "M
emor
y St
ick"
com
patib
le p
rodu
cts.
With
this
TV
you
can
use
the
"Mem
ory
Stic
k" to
dis
play
stil
l im
ages
JPE
G p
ictu
res,
DC
F ve
rsio
n 1.
0 fo
rmat
)**
as w
ell a
sm
ovin
g pi
ctur
es (
MPE
G 1
).
*"M
emor
y St
ick"
and
the
logo
are
trad
emar
ks o
f So
ny C
orpo
ratio
n.**
D
CF
(Des
ign
rule
s fo
r C
amer
a Fi
le s
yste
ms)
is a
sta
ndar
d fi
le n
ame
form
at f
or d
igita
l stil
l cam
eras
, DV
cam
cord
ers
etc.
It i
s su
ppor
ted
by S
ony
and
othe
r m
anuf
actu
rers
.
Inse
rtin
g a
"M
emo
ry S
tick
" In
sert
a "
Mem
ory
Stic
k", i
nto
the
“ME
MO
RY
ST
ICK
” sl
ot u
ntil
it cl
icks
into
the
conn
ecto
r (s
ee p
ictu
re).
Inse
rt th
e "M
emor
y St
ick"
with
the
mar
k v
fac
ing
up a
nd
poin
ting
tow
ards
the
"ME
MO
RY
ST
ICK
" sl
ot.
The
red
ligh
t of
the
Mem
ory
Stic
k fl
ashe
s in
dica
ting
that
the
"Mem
ory
Stic
k" c
onte
nts
are
bein
g re
ad.
Inse
rtin
g a
"M
emo
ry S
tick
Du
o"
You
can
als
o us
e a
"Mem
ory
Stic
k D
uo"
with
this
TV
by
inse
rtin
g th
e "M
emor
y St
ick
Duo
dir
ectly
into
the
"ME
MO
RY
ST
ICK
" sl
ot.
Vie
win
g p
ictu
res
or
mo
vies
fro
m t
he
"Mem
ory
Sti
ck"
See
page
s 31
-35.
Rem
ovi
ng
a "
Mem
ory
Sti
ck"
Push
the
"M
emor
y St
ick"
and
the
n re
leas
e, t
he "
Mem
ory
Stic
k" w
ill s
prin
g ou
t.R
emov
e th
e "M
emor
y St
ick"
.
"M
emo
ry S
tick
" p
reca
uti
on
s•
Do
not r
emov
e th
e "M
emor
y St
ick"
whi
le it
is
read
ing
or w
ritin
g da
ta.
•W
e re
com
men
d th
at y
ou m
ake
a ba
ckup
cop
y of
im
port
ant d
ata
that
you
rec
ord
on th
e "M
emor
y St
ick"
.•
Whe
n yo
u se
t the
"M
emor
y St
ick"
era
sure
pr
even
tion
switc
h to
"L
OC
K",
dat
a ca
nnot
be
reco
rded
, edi
ted,
or
eras
ed.
•D
ata
may
bec
ome
dam
aged
if:
- y
ou r
emov
e th
e M
emor
y St
ick
or tu
rn o
ff th
e T
V
whi
le it
is r
eadi
ng o
r w
ritin
g da
ta.
- y
ou u
se th
e "M
emor
y St
ick"
in a
loca
tion
subj
ect
to th
e ef
fect
s of
sta
tic e
lect
rici
ty o
r el
ectr
ic n
oise
.•
"Mem
ory
Stic
k" s
uppo
rts
JPE
G D
CF
form
atte
d fi
les
only
. A
ny f
iles
not r
ecog
nise
d as
DC
F fo
rmat
will
be
dis
play
ed a
s “-
----
---”
or
in b
lank
. JPE
G D
CF
form
atte
d fi
les
that
hav
e be
en c
reat
ed o
r mod
ifie
d on
a
PC m
ay n
ot a
ppea
r co
rrec
tly o
n th
e T
V s
cree
n.
•Pi
ctur
es ta
ken
by s
ome
equi
pmen
ts m
ay n
ot b
e di
spla
yed
on th
is
tele
visi
on s
cree
n.•
In a
dditi
on to
thes
e pr
ecau
tions
, we
reco
mm
end
that
you
ca
refu
lly r
ead
the
inst
ruct
ions
sup
plie
d w
ith th
e "M
emor
y St
ick"
.•
Alth
ough
you
may
be
able
to v
iew
imag
es o
n ce
rtai
n no
n-So
ny b
rand
"M
emor
y St
ick"
med
ia, i
t is
poss
ible
that
som
e im
ages
can
not b
e di
spla
yed
and
som
e fe
atur
es (
rota
te, e
tc.)
may
not
be
avai
labl
e. I
f yo
u at
tem
pt a
ny o
f the
se o
pera
tions
an
erro
r mes
sage
w
ill o
ccur
.
– 15 –
XS1RM-Y1010
Tel
etex
tT
elet
ext i
s an
info
rmat
ion
serv
ice
tran
smitt
ed b
y m
ost T
V s
tatio
ns. T
he in
dex
page
of
the
tele
text
ser
vice
(u
sual
ly p
age
100)
giv
es y
ou in
form
atio
n on
how
to u
se th
e se
rvic
e. T
o op
erat
e te
lete
xt, u
se th
e re
mot
e co
ntro
l bu
ttons
as
indi
cate
d be
low
.
Tel
etex
t err
ors
may
occ
ur if
you
use
a c
hann
el (
TV
Bro
adca
st)
with
a w
eak
sign
al.
To
sw
itch
on
Tel
etex
t :
1Se
lect
the
broa
dcas
t cha
nnel
whi
ch c
arri
es th
e te
lete
xt
serv
ice
you
wis
h to
vie
w.
2Pr
ess
the
b
utto
n on
ce to
ent
er P
ictu
re A
nd T
ext
(PA
T)
mod
e. T
he s
cree
n is
div
ided
into
two
with
the
Tex
t dis
play
on
the
left
and
the
TV
cha
nnel
in th
e bo
tton
righ
t cor
ner.
W
hile
vie
win
g PA
T, y
ou c
an z
oom
the
pict
ure
scre
en b
y pr
essi
ng v
or V
but
tons
. Onc
e th
e tw
o sc
reen
s are
ove
rlap
ped,
they
can
be
swap
ped
by p
ress
ing
the
OK
but
ton.
3If
you
wis
h to
vie
w th
e T
ext i
n fu
ll sc
reen
mod
e, p
ress
th
e b
utto
n a
seco
nd ti
me.
To
sel
ect
a T
elet
ext
pag
e:In
put 3
dig
its f
or th
e pa
ge n
umbe
r, u
sing
the
num
bere
d bu
ttons
.•
If y
ou m
ake
a m
ista
ke, r
etyp
e th
e co
rrec
t pag
e nu
mbe
r.•
If th
e co
unte
r on
the
scre
en c
ontin
ues
sear
chin
g, it
is b
ecau
se th
e pa
ge
is n
ot a
vaila
ble.
If t
his
is th
e ca
se, i
nput
ano
ther
pag
e nu
mbe
r.
To
acc
ess
the
nex
t o
r p
rece
din
g p
age:
Pres
s PR
OG
+ (
) or
PR
OG
- (
) .
To
fre
eze
a te
lete
xt p
age:
Pres
s /
. Pre
ss it
aga
in to
can
cel t
he f
reez
e.
To
sel
ect
a su
b p
age:
A
tele
text
pag
e m
ay c
onsi
st o
f se
vera
l sub
pag
es. I
n th
is c
ase,
one
or
mor
e ar
row
s ap
pear
nex
t to
the
page
num
ber.
Pre
ss B
or b
to d
ispl
ay a
n in
form
atio
n lin
e at
the
botto
m o
f th
e sc
reen
sh
owin
g th
e nu
mbe
r of s
ub p
ages
con
tain
ed o
n th
is p
age.
As
soon
as
sub
page
s ar
e av
aila
ble,
they
st
art t
o au
tom
atic
ally
run
. If
you
wan
t to
stop
the
show
and
sel
ect y
our
desi
red
sub
page
, pre
ss
repe
ated
ly B
or b
.
To
Sw
itch
Off
Tel
etex
t:
Pres
s .
Fas
text
Fast
ext s
ervi
ce le
ts y
ou a
cces
s T
elet
ext p
ages
with
one
but
ton
push
.W
hen
you
are
in T
elet
ext m
ode
and
Fast
ext i
s br
oadc
ast,
a co
lour
cod
ed m
enu
appe
ars
at
the
botto
m o
f the
tele
text
pag
e. P
ress
the
appr
opri
ate
colo
ured
but
ton
(red
, gre
en, y
ello
w
or b
lue)
to a
cces
s th
e pa
ge c
orre
spon
ding
to y
our
men
u ch
oice
.
13
46
79
Nex
TV
iew
**(
depe
ndin
g on
ava
ilabi
lity
of s
ervi
ce).
Nex
TV
iew
is a
n on
-scr
een
elec
tron
ic p
rogr
amm
e gu
ide,
pro
vidi
ng y
ou w
ith p
rogr
amm
e in
form
atio
n fo
r di
ffer
ent b
road
cast
ers.
Whe
n lo
okin
g fo
r in
form
atio
n yo
u ca
n se
arch
by
them
e (s
port
s, a
rt, e
tc...
) or
dat
e.
If w
rong
cha
ract
ers
appe
ar w
hen
view
ing
Nex
TV
iew
, use
the
men
u sy
stem
to e
nter
the
“Lan
guag
e” m
enu
(see
pa
ge 2
6) a
nd s
elec
t the
sam
e la
ngua
ge a
s th
e N
exT
Vie
w is
bro
adca
sted
.
Dis
pla
yin
g N
exT
Vie
w
1Se
lect
a b
road
cast
cha
nnel
pro
vidi
ng a
Nex
TV
iew
ser
vice
. In
this
cas
e th
e in
dica
tion
“Nex
TV
iew
” is
dis
play
ed a
s so
on a
s da
ta is
ava
ilabl
e.
2T
o se
e N
exT
Vie
w s
ervi
ce y
ou h
ave
two
diff
eren
t typ
es o
f Nex
TV
iew
inte
rfac
e. T
hese
dep
end
on th
e %
of
avai
labl
e da
ta:
a)
“Pro
gram
me
Lis
t” in
terf
ace:
Whi
lst y
ou a
re w
atch
ing
TV
, and
aft
er th
e in
dica
tion
“Nex
TV
iew
” (c
olou
red
oran
ge) i
s di
spla
yed
on th
e sc
reen
, pre
ss th
e b
utto
n on
the
rem
ote
cont
rol t
o w
atch
the
“Pro
gram
me
Lis
t” in
terf
ace
(see
fig
. 1).
b)
“Ove
rvie
w”
inte
rfac
e:W
hils
t you
are
wat
chin
g T
V, a
nd a
fter
mor
e th
an 5
0% o
f N
exT
Vie
w d
ata
is a
vaila
ble
(100
% d
ata
may
not
be
avai
labl
e de
pend
ing
on th
e ar
ea)
the
indi
catio
n “N
exT
Vie
w”
(col
oure
d bl
ack)
is d
ispl
ayed
on
the
scre
en. P
ress
the
but
ton
on th
e re
mot
e co
ntro
l to
wat
ch th
e “O
verv
iew
” in
terf
ace
(see
fig
. 2).
3 T
o na
viga
te th
roug
h N
exT
Vie
w:
• Pr
ess B
or b
to m
ove
left
or
righ
t. •
Pres
s v
or V
to m
ove
dow
nwar
ds o
r up
war
ds.
• Pr
ess
OK
to c
onfi
rm a
sel
ectio
n.
• If
you
hav
e se
lect
ed a
pro
gram
me,
pre
ss O
K to
get
mor
e in
form
atio
n on
the
sele
cted
pro
gram
me.
4T
o sw
itch
Nex
TV
iew
off
, pre
ss th
e b
utto
n on
the
rem
ote
cont
rol.
“P
rogr
amm
e L
ist”
inte
rfac
e (f
ig. 1
):
“
Ove
rvie
w”
inte
rfac
e (f
ig. 2
):
1 P
rogr
amm
me
list
2
3
Ico
ns’
key
:
General
Praesentiertvon
IhrerProgrammzeitschr
www.tvmovie.de
Thu12Jun
14:36
Thu12
AttrText
AttrText
AttrText
AttrText
AttrText
AttrText
Krimiserie-DerFallmitdem
mittelmass
PerryMason
RTL2
14:30
15:00
15:30
16:00
Tue17Jun
14:55
-16:30
Aufschlimmerundewig
Baywatch
BennyHill
TheOsbournes
Segeln:Louis
VuittonCup
TwilightZone
categories
Perry
Mason
Date
Select:
1
23
General
Praesentiertvon
IhrerProgrammzeitschr
www.tvmovie.de
Thu12Jun
14:36
Thu12
AttrText
AttrText
AttrText
AttrText
AttrText
AttrText
Krimiserie-DerFallmitdem
mittelmass
PerryMason
RTL2
14:30
15:00
15:30
16:00
AttrText16
AttrText16
AttrText16
AttrText16
AttrText16
AttrText16
Tue17Jun
14:55
-16:30
Categories
Date
Select:
1
23
G
ener
al:
All
the
prog
ram
me
info
rmat
ion
is li
sted
by
time
and
broa
dcas
t cha
nnel
s or
der.
N
ews
M
ovie
Sp
orts
Sh
ow
C
hild
ren
A
rts
Mus
ic
Dat
e:Pr
ess
the
red
butt
on o
f th
e re
mot
e co
ntro
l to
disp
lay
the
date
scr
een,
yo
u ca
n se
lect
the
desi
red
date
by
pres
sing
v o
r V
. Nex
t pre
ss O
K to
co
nfir
m.
Cat
egor
ies:
Pres
s th
e bl
ue b
utto
n of
the
rem
ote
to
disp
lay
the
icon
s (s
ee b
elow
the
Icon
’s k
ey)
for
diff
eren
t the
mes
. Nex
t pre
ss v
or V
to
sele
ct th
e de
sire
d ic
on a
nd f
inal
ly p
ress
the
OK
but
ton
to c
onfi
rm.
– 16 –
XS1RM-Y1010
* “P
layS
tati
on”
is
a pr
oduc
t of S
ony
Com
pute
r E
nter
tain
men
t, In
c.*
“Pla
ySta
tion
” is
a
trad
emar
k of
So
ny C
ompu
ter
Ent
erta
inm
ent,
Inc.
Co
nn
ecti
ng
Eq
uip
men
t to
th
e T
V•
Usi
ng th
e fo
llow
ing
inst
ruct
ions
you
can
con
nect
a w
ide
rang
e of
opt
iona
l equ
ipm
ent t
o y
our
TV
set
. •
Con
nect
ing
cabl
es a
re n
ot s
uppl
ied.
Co
nn
ecti
ng
a V
CR
To
conn
ect a
VC
R, p
leas
e re
fer t
o th
e se
ctio
n “C
onne
ctin
g th
e ae
rial
and
VC
R”
of th
is in
stru
ctio
n m
anua
l on
page
14.
Co
nn
ecti
ng
a V
CR
or
a D
VD
rec
ord
er t
hat
su
pp
ort
s S
mar
tLin
kSm
artL
ink
is a
dir
ect l
ink
betw
een
the
TV
set
and
a S
mar
tLin
k co
mpa
tible
VC
R/D
VD
rec
orde
r. F
or m
ore
info
rmat
ion
on S
mar
tLin
k, p
leas
e re
fer
to th
e in
stru
ctio
n m
anua
l of
your
Sm
artL
ink
VC
R/D
VD
rec
orde
r.
If y
ou u
se a
VC
R o
r a
DV
D r
ecor
der
that
sup
port
s Sm
artL
ink,
ple
ase
conn
ect t
he V
CR
or
the
DV
D r
ecor
der
to th
e T
V u
sing
a S
cart
lead
to th
e Sc
art
2/ J
or
3/ K
.
Bot
h Sc
art c
onne
ctor
s 2/
J a
nd
3/ K
can
not s
uppo
rt S
mar
tLin
k at
the
sam
e tim
e. I
f yo
u co
nnec
t a V
CR
or
a D
VD
rec
orde
r to
bot
h Sc
art c
onne
ctor
s, s
elec
t whi
ch S
cart
sup
port
s Sm
artL
ink
thro
ugh
the
“Sm
artL
ink”
opt
ion
in th
e “F
eatu
res”
men
u. F
or d
etai
ls s
ee p
age
23.
If y
ou
hav
e co
nn
ecte
d a
dec
od
er o
r a
Set
To
p B
ox
to t
he
Sca
rt
3/ K
or
thro
ug
h a
V
CR
co
nn
ecte
d t
o t
his
Sca
rtSe
lect
the
“Man
ual P
rogr
amm
e Pr
eset
” op
tion
in th
e “S
et U
p” m
enu
and
afte
r en
teri
ng in
the
“Dec
oder
**”
optio
n,
sele
ct “
On”
(re
fer
to p
age
29).
Rep
eat t
his
optio
n fo
r ea
ch s
cram
bled
sig
nal.
**T
his
optio
n is
onl
y av
aila
ble
depe
ndin
g on
the
coun
try
you
have
sel
ecte
d in
the
“Cou
ntry
” m
enu.
(MON
O)
L/G/S/I
R/D/D/D
To
avoi
d sn
owy
pict
ure,
do
not
conn
ect e
xter
nal e
quip
men
t to
conn
ecto
rs A
and
B a
t the
sa
me
time.
8mm
/Hi8
/D
VC
cam
cord
erS
VH
S/H
i8/
DV
Cca
mco
rder
A B C
K
DV
D
J
Hi-
fiD
VD
rec
orde
r w
ith
com
pone
nt s
igna
l for
mat
ID
GH
E Com
pact
AV
Syst
em/A
mpl
ifie
r
VC
R
Dec
oder
PlayStation
2 “Pla
ySta
tion”
*
Sub
woo
fer
F
S
S
S
cont
inue
d...
Co
nn
ecti
ng
a D
VD
or
DV
D r
eco
rder
Con
nect
the
DV
D o
r th
e D
VD
rec
orde
r to
the
Scar
t con
nect
or
2/ J
.
Co
nn
ecti
ng
a D
VD
rec
ord
er w
ith
576
p s
ign
al f
orm
atSo
me
DV
D r
ecor
der
may
hav
e 57
6p s
igna
l for
mat
. In
this
cas
e, c
onne
ct th
e D
VD
rec
orde
r to
the
Scar
t con
nect
or
2/ J
, to
the
audi
o in
put j
acks
4 G
and
to th
e vi
deo
com
pone
nt ja
cks
Y, P
B/C
B, P
R/C
R
4 H
.
Usi
ng th
is c
onne
ctio
n, th
e T
V w
ill r
ecor
d fr
om th
e A
V2
inpu
t ( S
cart
con
nect
or
2/ J
).To
wat
ch th
e in
put s
igna
l, yo
u ca
n ch
ose
from
AV
2 (S
cart
con
nect
or
2/ J
) or A
V4
(aud
io in
put j
acks
4
G a
nd v
ideo
com
pone
nt ja
cks
4 H
). T
o w
atch
the
best
pic
ture
we
reco
mm
end
you
sele
ct A
V4.
Co
nn
ecti
ng
Au
dio
Eq
uip
men
t to
th
e T
VT
o li
sten
to
th
e so
un
d f
rom
TV
on
Hi-
fi e
qu
ipm
ent.
Con
nect
you
r au
dio
equi
pmen
t to
the
audi
o ou
tput
soc
kets
E if
you
wis
h to
am
plif
y th
e au
dio
outp
ut f
rom
the
TV
. N
ext,
usin
g th
e m
enu
syst
em, s
elec
t the
“So
und
Adj
ustm
ent”
men
u an
d se
t the
“T
V S
peak
ers”
to "
Off
" (s
ee p
age
21).
• To
con
trol
the
exte
rnal
spe
aker
s us
ing
this
rem
ote
cont
rol,
set “
Aud
io O
utpu
t” o
ptio
n to
“V
aria
ble”
in t
he “
Soun
d A
djus
tmen
t” m
enu
(see
pag
e 21
).
• T
he v
olum
e of
the
exte
rnal
spe
aker
s ca
n be
alte
red
by p
ress
ing
the
volu
me
butto
ns o
n th
e T
V re
mot
e co
ntro
l.
The
treb
le a
nd b
ass
setti
ng c
an a
lso
be a
ltere
d th
roug
h th
e “S
ound
Adj
ustm
ent”
men
u (s
ee p
age
20).
Fo
r a
sub
wo
ofe
rC
onne
ct y
our
sub
woo
fer
to th
e 5
W/G
/W/G
out
put j
ack D
usi
ng a
mon
aura
l aud
io c
able
.
To
en
joy
“Do
lby
Vir
tual
” so
un
d e
ffec
t th
rou
gh
yo
ur
aud
io e
qu
ipm
ent
Plac
e th
e sp
eake
rs o
f yo
ur e
quip
men
t in
fron
t of
your
list
enin
g po
sitio
n an
d be
side
the
TV
set
.T
hen
by u
sing
the
men
u sy
stem
, sel
ect t
he m
enu
“Sou
nd A
djus
tmen
t”. N
ext
set t
he o
ptio
n "A
udio
Out
put"
to "
Var
iabl
e" a
nd th
e op
tion
"Sou
nd E
ffec
t" to
"D
olby
Vir
tual
" (s
ee p
ages
20
and
21).
To
co
ntr
ol t
he
volu
me
leve
l of
an e
xter
nal
am
plif
ier
Whe
n yo
u co
nnec
t the
AV
mou
se a
nd in
stal
l it i
n an
ext
erna
l am
plif
ier,
you
can
use
the
exte
rnal
am
plif
ier’
s re
mot
e co
ntro
l tow
ard
the
TV
for
con
trol
ling
the
volu
me
leve
l of
the
exte
rnal
am
plif
ier.
Con
nect
the
AV
mou
se to
the
AV
M
OU
SE I
N ja
ck F
, and
inst
all i
t rig
ht a
bove
the
exte
rnal
am
plif
ier’
s re
mot
e co
ntro
l sen
sor.
AV
mou
se(s
uppl
ied)
Am
plif
ier
Rem
ote
cont
rol s
enso
r
You
r si
tting
pos
ition
~50°
Hi-
Fi s
peak
ers
– 17 –
XS1RM-Y1010
Vie
win
g pi
ctur
es fr
om e
quip
men
t con
nect
ed to
the
TV
1C
onne
ct y
our
equi
pmen
t to
the
desi
gnat
ed T
V s
ocke
t, as
indi
cate
d on
pag
e 38
.
2Sw
itch
on th
e co
nnec
ted
equi
pmen
t.
3T
o w
atch
the
pict
ure
from
the
conn
ecte
d eq
uipm
ent,
pres
s th
e b
utto
n re
peat
edly
unt
il th
e co
rrec
t inp
ut s
ymbo
l app
ears
on
the
scre
en.
Sym
bo
l I
np
ut
Sig
nal
s
1
•A
udio
/ vi
deo
inpu
t sig
nal t
hrou
gh th
e Sc
art c
onne
ctor
I
1
•R
GB
inpu
t sig
nal t
hrou
gh th
e Sc
art c
onne
ctor
I. T
his
sym
bol a
ppea
rs o
nly
if
an R
GB
sou
rce
has
been
con
nect
ed.
2•
Aud
io /
vide
o in
put s
igna
l thr
ough
the
Scar
t con
nect
or J
.
2•
RG
B in
put s
igna
l thr
ough
the
Scar
t con
nect
or J
. Thi
s sy
mbo
l app
ears
onl
y if
an
RG
B s
ourc
e ha
s be
en c
onne
cted
.
3•
Aud
io/v
ideo
inpu
t sig
nal t
hrou
gh th
e Sc
art c
onne
ctor
K.
3•
S V
ideo
Inpu
t sig
nal t
hrou
gh th
e Sc
art c
onne
ctor
K. T
his
sym
bol a
ppea
rs o
nly
if a
n S
Vid
eo s
ourc
e ha
s be
en c
onne
cted
.
4
•C
ompo
nent
inpu
t sig
nal t
hrou
gh th
e Y
, PB/C
B, P
R/C
R ja
cks H
and
aud
io in
put
sign
al th
roug
h G
.
5•
Vid
eo in
put s
igna
l thr
ough
the
phon
o so
cket
B a
nd A
udio
inpu
t sig
nal t
hrou
gh
C.
5•
S V
ideo
Inp
ut s
igna
l thr
ough
the
side
S V
ideo
inpu
t jac
k A
and
Aud
io s
igna
l th
roug
h C
. Thi
s sy
mbo
l app
ears
onl
y if
an
S V
ideo
sou
rce
has
been
con
nect
ed.
4 P
ress
the
but
ton
on th
e re
mot
e co
ntro
l to
retu
rn to
the
norm
al T
V p
ictu
re.
For
Mon
o E
quip
men
tC
onne
ct th
e ph
ono
plug
to th
e L
/G/S
/I s
ocke
t on
the
side
of
the
TV
and
sel
ect
5 or
5
inpu
t sig
nal u
sing
the
inst
ruct
ions
abo
ve. N
ext,
refe
r to
the
“Sou
nd A
djus
tmen
t” s
ectio
n of
this
m
anua
l and
set
“D
ual S
ound
” op
tion
to “
A”
on th
e so
und
men
u sc
reen
(se
e pa
ge 2
0).
S S
S
Rem
ote
Co
ntr
ol C
on
fig
ura
tio
n f
or
VC
R o
r D
VD
In it
’s d
efau
lt co
nditi
on th
is r
emot
e co
ntro
l will
ope
rate
the
basi
c fu
nctio
ns o
f th
is S
ony
TV
, Son
y D
VD
s an
d m
ost S
ony
VC
Rs.
To
cont
rol V
CR
s an
d D
VD
s of
oth
er m
anuf
actu
rers
(an
d so
me
Sony
VC
R m
odel
s), t
he
rem
ote
cont
rol n
eeds
to b
e co
nfig
ured
.
To
do t
his:
•B
efor
e yo
u st
art,
look
up
the
3 di
git c
ode
for y
our b
rand
of D
VD
or V
CR
from
the
list b
elow
. O
n th
ose
bran
ds th
at h
ave
mor
e th
an o
ne c
ode,
ent
er th
e fi
rst c
ode
num
ber.
•So
ny w
ill e
ndea
vour
to u
pdat
e th
e so
ftw
are
acco
rdin
g to
mar
ket c
hang
es. T
here
fore
, ple
ase
refe
r to
the
code
tabl
e in
clud
ed w
ith th
e re
mot
e co
ntro
l for
late
st c
ode
set.
•A
sm
all l
abel
is p
rovi
ded
insi
de th
e ba
ttery
doo
r to
allo
w y
ou to
rec
ord
your
bra
nd c
odes
.
1Pr
ess
and
hold
the T
but
ton
on th
e re
mot
e co
ntro
l for
app
roxi
mat
ely
6 se
cond
s un
til th
e gr
een
DV
D a
nd V
CR
ligh
t of
the
Med
ia S
elec
tor
star
ts
flas
hing
(se
e fi
g. 1
).
2W
hile
the
VC
R a
nd D
VD
ligh
ts a
re f
lash
ing,
ent
er a
ll th
ree
digi
ts o
f th
e co
de f
or y
our
bran
d of
VC
R o
r D
VD
(se
e th
e lis
t bel
ow)
usin
g th
e nu
mbe
r bu
tton
s on
the
rem
ote
cont
rol (
see
fig.
2).
If
your
sel
ecte
d co
de is
ent
ered
cor
rect
ly, t
he g
reen
VC
R o
r D
VD
lig
ht (
acco
rdin
g to
you
r se
lect
ion)
will
be
lit m
omen
tari
ly (
see
fig.
3)
, oth
erw
ise
repe
at a
ll th
e ab
ove
step
s.
3Tu
rn o
n yo
ur V
CR
or
DV
D a
nd c
heck
that
the
mai
n fu
nctio
ns (
play
back
, st
op, r
ewin
d, f
ast f
orw
ard
and
chan
nel s
elec
tion
for
both
VC
R a
nd
DV
Ds
as w
ell a
s M
enu
and
curs
ors
butto
ns o
nly
for
DV
Ds)
wor
k.
• If
you
r dev
ice
is n
ot w
orki
ng o
r som
e of
the
func
tions
do
not w
ork
plea
se c
heck
that
you
en
tere
d th
e co
rrec
t cod
e or
try
the
next
cod
e lis
ted
agai
nst t
he b
rand
.
•N
ot a
ll br
ands
are
cov
ered
and
not
all
mod
els
of e
very
bra
nd m
ay b
e co
vere
d.
4A
lway
s re
mem
ber
to p
ress
the T
or t
but
ton
until
the
gree
n lig
ht il
umin
ates
acc
ordi
ng to
th
e eq
uipm
ent y
ou w
ant t
o op
erat
e w
ith th
is r
emot
e co
ntro
l: V
CR
, TV
or
DV
D. R
efer
to p
ages
42
-43
on
how
to o
pera
te th
e A
UX
mod
e.
VC
R B
ran
d L
ist
DV
D B
ran
d L
ist
Bra
nd
C
od
eB
ran
dC
od
eS
ON
Y (
VH
S)30
1, 3
02, 3
03, 3
08, 3
09,3
62S
ON
Y (
BE
TA
)30
3, 3
07, 3
10S
ON
Y (
DV
)30
4, 3
05, 3
06A
IWA
325,
331
, 351
AK
AI
326,
329
, 330
DA
EW
OO
342,
343
GR
UN
DIG
358,
355
, 360
, 361
, 320
, 351
, 366
HIT
AC
HI
327,
333
, 334
JVC
314,
315
, 322
, 344
, 352
, 353
, 354
, 348
, 349
LG
332,
338
LO
EW
E35
8, 3
55, 3
60, 3
61, 3
20, 3
51M
AT
SUI
356,
357
OR
ION
328
PA
NA
SON
IC32
1, 3
23PH
ILIP
S31
1, 3
12, 3
13, 3
16, 3
17, 3
18, 3
58, 3
59,
363,
364
SAM
SUN
G33
9, 3
40, 3
41, 3
45S
AN
YO
335,
336
SH
AR
P32
4T
HO
MSO
N31
9, 3
50, 3
65T
OSH
IBA
337
SON
Y00
1, 0
29, 0
30, 0
36, 0
37, 0
38, 0
39, 0
40,
041,
042
, 043
, 044
, 053
, 054
, 055
AIW
A02
1 A
KA
I03
2D
EN
ON
018,
027
, 020
, 002
GR
UN
DIG
009,
028
, 023
, 024
, 016
, 003
HIT
AC
HI
025,
026
, 015
, 004
, 035
JVC
006,
017
KE
NW
OO
D00
8L
G01
5, 0
14, 0
34L
OE
WE
009,
028
, 023
, 024
, 016
, 003
MA
TSU
I01
3, 0
16O
NK
YO
022,
033
PAN
ASO
NIC
018,
027
, 020
, 002
, 045
, 046
, 047
PHIL
IPS
009,
028
, 023
, 024
, 016
, 003
, 031
PIO
NE
ER
004,
050
, 051
, 052
SAM
SUN
G01
1, 0
14SA
NY
O00
7SH
AR
P01
9, 0
27T
HO
MSO
N01
2T
OSH
IBA
003,
048
, 049
YA
MA
HA
018,
027
, 020
, 002
13
46
79
fig.
1
6 se
c.
VCR
TVDV
D
AUX
MO
DE
VCR
TVDV
D
AUX
MO
DE
fig.
3
fig.
2
– 18 –
XS1RM-Y1010
Tec
hn
ical
Sp
ecif
icat
ion
sP
anel
Sys
tem
:PD
P (P
lasm
a D
ispl
ay P
anel
)
TV
sys
tem
: D
epen
ding
on
your
cou
ntry
se
lect
ion:
B
/G/H
, D/K
, L, I
Col
our
syst
em:
PAL
, SE
CA
M
NT
SC 3
.58,
4.4
3 (o
nly
Vid
eo I
n)
Aer
ial:
75 o
hm e
xter
nal t
erm
inal
for
V
HF/
UH
F
Cha
nnel
Cov
erag
e:V
HF:
E
2-E
12U
HF:
E
21-E
69C
AT
V:
S1-S
20H
YPE
R: S
21-S
41D
/K:
R1-
R12
, R21
-R69
L:
F2-F
10, B
-Q, F
21-F
69I:
U
HF
B21
-B69
Scre
en S
ize:
• KE-
P37X
S1: 3
7 in
ches
(app
rox.
94
cm
mea
sure
d di
agon
ally
)• K
E-P4
2XS1
: 42
inch
es (a
ppro
x. 1
07 c
m
mea
sure
d di
agon
ally
)
Dis
play
Res
olut
ion:
1024
dot
s (h
oriz
onta
l) x
102
4 lin
es
(ver
tical
)
Pow
er R
equi
rem
ent:
220-
240V
AC
; 50/
60 H
z
Pow
er C
onsu
mpt
ion:
• K
E-P
37X
S1:
312
W•
KE
-P42
XS1
: 3
70 W
Stan
dby
Pow
er C
onsu
mpt
ion:
1.9
W
Soun
d O
utpu
t:2
x 15
W (
RM
S)
Dim
ensi
ons
(w x
h x
d):
• K
E-P
37X
S1:
App
rox.
113
5 x
692
x 28
6 m
m
• K
E-P
42X
S1:
App
rox.
122
9 x
753
x 28
6 m
m
Wei
ght:
• K
E-P
37X
S1:
App
rox.
37.
5 K
g.
• K
E-P
42X
S1:
App
rox.
43
Kg.
Rea
r T
erm
inal
s:•
AV
1:
1/21
-pin
Sca
rt c
onne
ctor
(C
EN
EL
EC
sta
ndar
d) in
clud
ing
audi
o/vi
deo
inpu
t, R
GB
inpu
t, T
V a
udio
/vid
eo o
utpu
t.
• A
V2:
2/
(SM
AR
TL
INK
; se
lect
able
) 21
-pin
Sca
rt c
onne
ctor
(C
EN
EL
EC
sta
ndar
d) in
clud
ing
audi
o/vi
deo
inpu
t, R
GB
inpu
t, se
lect
able
aud
io/v
ideo
out
put
and
Smar
tLin
k in
terf
ace.
• A
V3:
3/
(SM
AR
TL
INK
; se
lect
able
) 21
-pin
Sca
rt c
onne
ctor
(C
EN
EL
EC
sta
ndar
d) in
clud
ing
audi
o/vi
deo
inpu
t, S
vide
o in
put,
sele
ctab
le a
udio
/vid
eo o
utpu
t an
d Sm
artli
nk in
terf
ace.
• A
V4: •
4: Y
:1 V
p-p,
75
ohm
s,0.
3V n
egat
ive
sync
PB:0
.7 V
p-p,
75
ohm
sPR
:0.7
Vp-
p, 7
5 oh
ms
• 4:
aud
io in
put (
phon
o
jack
s)50
0 m
Vrm
s (1
00%
m
odul
atio
n),
Impe
danc
e: 4
7 ki
lo
ohm
s
• A
V M
OU
SE:
min
ijack
• a
udio
out
puts
(L
eft/R
ight
) -
phon
o ja
cks
•
Sub
Woo
fer
outp
ut (
phon
o ja
ck)
• A
eria
l con
nect
or (
RF
In)
Lef
t si
de:
• M
emor
y St
ick
Slot
Rig
ht s
ide
Ter
min
als:
• A
V5:
•
5:
S v
ideo
inpu
t (4-
pin
min
i DIN
):Y
: 1 V
p-p,
75-
ohm
s un
bala
nced
, syn
c
nega
tive
C: 0
.286
Vp-
p (B
urst
si
gnal
), 7
5 oh
ms
•
5: v
ideo
inpu
t (ph
ono
jack
):1
Vp-
p, 7
5-oh
ms
unba
lanc
ed, s
ync
ne
gativ
e
•
5: a
udio
inpu
t (ph
ono
jack
s):
500
m V
rms,
Im
peda
nce:
47
kilo
oh
ms
• h
eadp
hone
s ja
ck
Acc
esso
ries
sup
plie
d:•
One
Rem
ote
Con
trol
(R
M-Y
1010
)•
Tw
o si
ze A
A b
atte
ries
(R
03 ty
pe)
• O
ne C
oaxi
al C
able
• O
ne A
V M
ouse
• O
ne M
ains
Lea
ds (
Typ
e C
-4)
• O
ne M
ains
Lea
ds (
Typ
e B
F)•
One
Mai
ns L
eads
(T
ype
C-5
)M
ain
lead
s T
ype
BF
and
Typ
e C
-5 m
ay n
ot b
e su
pplie
d de
pend
ing
on th
e co
untr
y.•
One
Cle
anin
g cl
oth
• O
ne C
lum
p B
elt.
• T
wo
Anc
hor
atta
chm
ents
.
Oth
er f
eatu
res:
•T
elet
ext,
Fast
ext,
TO
Ptex
t•
Nex
TV
iew
•Sl
eep
Tim
er•
Smar
tLin
k (d
irec
t lin
k be
twee
n yo
ur T
V s
et a
nd a
com
patib
le
VC
R o
r D
VD
rec
orde
r. F
or m
ore
info
rmat
ion
on S
mar
tlink
, ple
ase
refe
r to
the
Inst
ruct
ion
Man
ual o
f yo
ur V
CR
or
DV
D r
ecor
der)
.•
TV
sys
tem
Aut
odet
ectio
n•
Dol
by V
irtu
al•
BB
E D
igita
l•
AC
I (A
uto
Cha
nnel
Ins
talla
tion)
•A
uto
Form
at•
DR
C®
(D
igita
l Rea
lity
Cre
atio
n)•
Rem
ote
Con
trol
with
lear
ning
fu
nctio
ns.
•M
emor
y St
ick
(rea
der)
.
S
S
Des
ign
an
d s
pec
ific
atio
ns
are
sub
ject
to c
han
ge
wit
ho
ut n
oti
ce.
Th
is in
stru
ctio
n m
anu
al h
as b
een
pri
nte
d o
n:
Eco
log
ical
Pap
er -
To
tally
Ch
lori
ne
Fre
e
Tro
ub
lesh
oo
tin
gH
ere
are
som
e si
mpl
e so
lutio
ns to
pro
blem
s w
hich
may
aff
ect t
he p
ictu
re a
nd s
ound
.
Pro
blem
Pos
sibl
e so
luti
on
No
pict
ure
No
pict
ure
(scr
een
is d
ark)
and
no
soun
d.•
Che
ck th
e ae
rial
con
nect
ion.
•C
onne
ct th
e T
V to
the
mai
ns, a
nd p
ress
the
pow
er s
witc
h on
the
righ
t sid
e of
the
TV
set
.•
If th
e (
stan
dby)
indi
cato
r is
on,
pre
ss A
UX
/VID
EO
o
n th
e re
mot
e co
ntro
l.
The
TV
turn
s of
f au
tom
atic
ally
. (T
he T
V
ente
rs th
e st
andb
y m
ode.
)•
Che
ck if
the
Slee
p T
imer
is a
ctiv
ated
(pa
ge 2
5).
•C
heck
if A
uto
Shut
off
is a
ctiv
ated
(pa
ge 2
5).
No
pict
ure
or n
o m
enu
info
rmat
ion
from
eq
uipm
ent c
onne
cted
to th
e Sc
art
conn
ecto
r.
•C
heck
that
the
optio
nal e
quip
men
t is
on a
nd p
ress
the
but
ton
repe
ated
ly o
n th
e re
mot
e co
ntro
l unt
il th
e co
rrec
t inp
ut s
ymbo
l is
disp
laye
d on
the
scre
en (
page
40)
. •
Che
ck th
e co
nnec
tion
betw
een
the
optio
nal e
quip
men
t and
the
TV
.
Poo
r pi
ctur
e/U
nsta
ble
pict
ure.
Dou
ble
imag
es o
r gh
ostin
g.•
Che
ck a
eria
l/cab
le c
onne
ctio
ns.
•C
heck
the
aeri
al lo
catio
n an
d di
rect
ion.
Onl
y sn
ow a
nd n
oise
app
ears
on
the
scre
en.
•C
heck
if th
e ae
rial
is b
roke
n or
ben
t.•
Che
ck if
the
aeri
al h
as r
each
ed th
e en
d of
its
serv
icea
ble
life.
(3-
5 ye
ars
in n
orm
al u
se, 1
-2 y
ears
at t
he s
easi
de)
Dot
ted
lines
or
stri
pes.
•K
eep
the
TV
aw
ay f
rom
ele
ctri
cal n
oise
sou
rces
suc
h as
car
s,
mot
orcy
cles
, or
hair
-dry
ers.
No
colo
ur o
n co
lour
pro
gram
mes
.•
Usi
ng th
e m
enu
syst
em, s
elec
t the
“Pi
ctur
e A
djus
tmen
t” m
enu
and
sele
ct “
Res
et”
to r
etur
n to
the
fact
ory
setti
ngs
(pag
e 19
).•
If y
ou s
et th
e Po
wer
Sav
ing
func
tion
to “
Red
uce,
” pi
ctur
e co
lour
s m
ay b
ecom
e di
mm
er (
page
22)
.
Som
e tin
y bl
ack
poin
ts a
nd/o
r br
ight
poin
ts o
n th
e sc
reen
.•
The
pic
ture
of t
he d
ispl
ay is
com
pose
d of
pix
els.
Tin
y bl
ack
poin
ts
and/
or b
righ
t poi
nts
(pix
els)
on
the
scre
en, d
o no
t ind
icat
e a
mal
func
tion.
The
pic
ture
is to
o br
ight
.
Pict
ure
(str
ipe)
noi
se.
•U
sing
the
men
u sy
stem
, sel
ect t
he “
Pict
ure
Adj
ustm
ent”
men
u an
d se
lect
“Pi
ctur
e M
ode”
The
n se
lect
the
desi
red
pict
ure
mod
e (p
age
18).
•M
ake
sure
that
the
aeri
al is
con
nect
ed u
sing
the
supp
lied
coax
ial
cabl
e.
•K
eep
the
aeri
al c
able
aw
ay f
rom
oth
er c
onne
ctin
g co
rds.
•D
o no
t use
300
-ohm
twin
lead
cab
les
as in
terf
eren
ce m
ay o
ccur
.
Poor
pic
ture
(w
hite
sat
urat
ion)
whe
n vi
ewin
g a
sign
al f
rom
Sca
rt c
onne
ctor
3/
.
•M
ake
sure
that
the
outp
ut s
igna
l of
the
equi
pmen
t con
nect
ed to
the
Scar
t con
nect
or
3/ is
not
an
RG
B s
igna
l. If
it is
an
RG
B
sign
al, p
leas
e co
nnec
t the
equ
ipm
ent t
o Sc
art
1/ o
r
2/.
S
S
TV
cont
inue
d...
– 19 –
XS1RM-Y1010
Stri
pe n
oise
dur
ing
play
back
/rec
ordi
ng
of a
VC
R.
•V
ideo
hea
d in
terf
eren
ce. K
eep
your
VC
R a
way
fro
m th
e T
V.
•L
eave
a s
pace
of 3
0 cm
bet
wee
n yo
ur V
CR
and
the
TV
set
to a
void
no
ise.
•A
void
inst
allin
g yo
ur V
CR
in f
ront
or
at th
e si
de o
f th
e T
V s
et.
Poor
or
no p
ictu
re (
scre
en is
dar
k), b
ut
good
sou
nd.
•U
sing
the
men
u sy
stem
, sel
ect t
he “
Pict
ure
Adj
ustm
ent”
men
u an
d se
lect
“R
eset
” to
ret
urn
to th
e fa
ctor
y se
tting
s (p
age
19).
•If
the
PIC
TU
RE
OFF
indi
cato
r lig
hts
up in
blu
e, p
ress
(pic
ture
off
) on
the
rem
ote
cont
rol.
Noi
sy p
ictu
re w
hen
view
ing
a T
V
chan
nel.
•U
sing
the
men
u sy
stem
, sel
ect t
he “
Man
ual P
rogr
amm
e Pr
eset
” op
tion
in th
e “S
et U
p” m
enu
and
adju
st F
ine
Tun
ing
(AFT
) to
ob
tain
bet
ter
pict
ure
rece
ptio
n (p
age
28).
•U
sing
the
men
u sy
stem
, set
the
"Noi
se R
educ
tion"
opt
ion
in th
e “P
ictu
re A
djus
tmen
t” m
enu
to re
duce
the
nois
e in
the
pict
ure
(pag
e 19
).
Dis
tort
ed p
ictu
re w
hen
chan
ging
pr
ogra
mm
es o
r se
lect
ing
tele
text
.•
Tur
n of
f any
equ
ipm
ent c
onne
cted
to th
e Sc
art c
onne
ctor
on
the
rear
of
the
TV
set
.
•U
sing
the
men
u sy
stem
, sel
ect t
he “
Feat
ures
” m
enu,
nex
t sel
ect t
he
“Scr
een
Save
r” s
ubm
enu
and
fina
lly s
et th
e “A
ll W
hite
” op
tion
to
“On”
to r
educ
e th
e im
age
rete
ntio
n (s
ee p
age
24).
•T
his
is in
here
nt in
the
Plas
ma
Dis
play
Pan
el, a
nd d
oes
not i
ndic
ate
a m
alfu
nctio
n.
Wro
ng c
hara
cter
s ap
pear
whe
n vi
ewin
g te
lete
xt.
•U
sing
the
men
u sy
stem
, ent
er th
e “C
ount
ry”
optio
n in
the
“Set
Up”
m
enu
and
sele
ct th
e co
untr
y in
whi
ch y
ou o
pera
te th
e T
V s
et (p
age
26).
For
Cyr
illic
lang
uage
s, w
e re
com
men
d th
at y
ou s
elec
t Rus
sia
if y
our
own
coun
try
does
not
app
ear
in th
e lis
t.
Wro
ng c
hara
cter
s ap
pear
whe
n vi
ewin
g N
exT
Vie
w.
•U
sing
the
men
u sy
stem
, ent
er th
e “L
angu
age”
opt
ion
in th
e “S
et
Up”
men
u an
d se
lect
the
lang
uage
as
the
Nex
TV
iew
is b
road
cast
ed
(pag
e 37
).
No
soun
d/N
oisy
sou
nd.
Goo
d pi
ctur
e, n
o so
und.
•Pr
ess
the
2 +
on
the
rem
ote
cont
rol.
•C
heck
that
“T
V S
peak
ers”
opt
ion
is s
et to
“M
ain”
in th
e “S
ound
A
djus
tmen
t” m
enu
(pag
e 21
).
Aud
io n
oise
.•
Mak
e su
re th
at th
e ae
rial
is c
onne
cted
usi
ng th
e su
pplie
d co
axia
l ca
ble.
•K
eep
the
aeri
al c
able
aw
ay fr
om o
ther
con
nect
ing
cord
s.•
Do
not u
se 3
00-o
hm tw
in le
ad c
able
s as
inte
rfer
ence
may
occ
ur.
•C
omm
unic
atio
n pr
oble
ms
may
occ
ur if
the
infr
ared
com
mun
icat
ion
equi
pmen
t (e.
g. in
frar
ed c
ordl
ess
head
phon
es) i
s us
ed n
ear t
he T
V.
Plea
se u
se h
eadp
hone
s ot
her t
han
infr
ared
cor
dles
s he
adph
ones
, m
ove
the
infr
ared
tran
scei
ver a
way
from
the
TV
unt
il th
e no
ise
is
elim
inat
ed, o
r mov
e th
e tr
ansm
itter
and
rece
iver
of t
he in
frar
ed
com
mun
icat
ion
equi
pmen
t clo
ser t
oget
her.
Pro
blem
Pos
sibl
e so
luti
on
cont
inue
d...
In th
e sc
reen
app
ears
an
imag
e re
tent
ion
(aft
erim
age)
The
scr
een
flic
kers
whe
n tu
rnin
g on
the
TV
.
The
TV
fan
noi
se g
ets
loud
er.
Can
not
oper
ate
the
men
u.
Stra
nge
soun
d.
•T
he v
entil
atio
n ho
les
can
accu
mul
ate
dust
ove
r a
peri
od o
f tim
e.
The
acc
umul
ated
dus
t may
mak
e th
e co
olin
g fu
nctio
n of
the
built
-in
fan
less
eff
ectiv
e. T
o pr
even
t thi
s, w
e re
com
men
d re
mov
ing
the
dust
per
iodi
cally
(on
ce a
mon
th)
usin
g a
vacu
um c
lean
er.
•If
the
item
you
wan
t to
sele
ct a
ppea
rs in
a p
ale
colo
ur, y
ou c
anno
t se
lect
it.
The
TV
cab
inet
cre
aks.
•C
hang
es in
roo
m te
mpe
ratu
re s
omet
imes
cau
ses
the
TV
cab
inet
to
expa
nd o
r co
ntra
ct, w
hich
can
mak
e sl
ight
noi
ses.
Thi
s do
es n
ot
indi
cate
a m
alfu
nctio
n.
The
TV
whi
rs.
•T
he T
V’s
fan
set
ting
is w
orki
ng. T
his
does
not
indi
cate
a
mal
func
tion.
The
TV
tick
s.•
An
elec
tric
al c
ircu
it in
side
the
TV
is a
ctiv
ated
whe
n th
e T
V is
tu
rned
on.
Thi
s do
es n
ot in
dica
te a
mal
func
tion.
The
TV
buz
zes.
•T
here
mig
ht b
e a
surg
e so
und
whe
n tu
rnin
g on
the
TV
. Thi
s do
es
not i
ndic
ate
a m
alfu
nctio
n.
Rem
ote
Con
trol
Rem
ote
cont
rol d
oes
not f
unct
ion.
The
(
stan
dby)
or
(po
wer
on)
in
dica
tors
on
the
TV
fla
shes
•C
heck
that
the
Med
ia S
elec
tor o
n th
e re
mot
e co
ntro
l is
set c
orre
ctly
fo
r th
e de
vice
you
are
usi
ng (
VC
R, T
V, D
VD
or
AU
X).
•If
the
rem
ote
cont
rol d
oes
not o
pera
te th
e V
CR
or D
VD
eve
n w
hen
the
Med
ia S
elec
tor h
as b
een
set c
orre
ctly
, ent
er th
e ne
cess
ary
code
se
t as
expl
aine
d in
“R
emot
e C
ontr
ol C
onfi
gura
tion
for
VC
R o
r D
VD
” on
pag
e41
.•
Rep
lace
the
batte
ries
.
•C
onta
ct y
our
near
est S
ony
serv
ice
cent
re.
Pro
blem
Pos
sibl
e so
luti
on
cont
inue
d...
– 20 –
XS1RM-Y1010
• I
f yo
u co
ntin
ue t
o ex
peri
ence
pro
blem
s, h
ave
your
TV
ser
vice
d by
qua
lifie
d pe
rson
nel.
•
Nev
er o
pen
the
casi
ng y
ours
elf.
Pro
blem
Pos
sibl
e so
luti
on
Can
not i
nser
t the
“M
emor
y St
ick”
into
the
“Mem
ory
Stic
k” s
lot.
Imag
es f
rom
the
“M
emor
y St
ick”
can
not
be
dis
play
ed o
r yo
u ca
n vi
ew th
e im
age
but
som
e fe
atur
es a
re n
ot a
vaila
ble
and
an
erro
r m
essa
ge a
ppea
rs o
n th
e T
V s
cree
n.
•T
he “
Mem
ory
Stic
k” is
not
fac
ing
in th
e co
rrec
t dir
ectio
n. I
nser
t th
e “M
emor
y St
ick”
with
the
b m
ark
faci
ng u
p in
to th
e “M
emor
y St
ick”
slo
t (pa
ge 3
0).
• T
his
is n
ot a
mal
func
tion
of th
e T
V. T
his
is b
ecau
se y
ou a
re u
sing
a
non-
Sony
bra
nd “
Mem
ory
Stic
k” m
edia
.
Can
not
dele
te a
file
or
all m
ater
ials
.•
The
wri
te-p
rote
ct s
witc
h on
the
“Mem
ory
Stic
k” is
set
to L
OC
K.
Rel
ease
the
lock
.•
The
imag
e fi
le is
pro
tect
ed. R
elea
se th
e pr
otec
tion
(pag
es 3
3-35
).
The
imag
e is
not
dis
play
ed•
The
imag
e fi
le is
not
DC
F-co
mpa
tible
or
MPE
G 1
- c
ompa
tible
.
"M
emo
ry S
tick
"
– 21 –
XS1RM-Y1010
SECTION 2 DISASSEMBLY
10
11
5
1
2
4
9
3
6
8
7
12
2
1
2-2. SPEAKER COVER REMOVAL
2-1. REAR COVER REMOVAL
– 22 –
XS1RM-Y1010
2-3. SPEAKER REMOVAL
2-4. H1 BOARD REMOVAL
1
2
3
4
13
2
4
– 23 –
XS1RM-Y1010
2-5. H2 BOARD REMOVAL
2-6. H3 BOARD REMOVAL
4
13
2
2
1
– 24 –
XS1RM-Y1010
2-7. H4 BOARD REMOVAL
2-8. HMP BOARD COVER REMOVAL
2
1
2
1
– 25 –
XS1RM-Y1010
2-9. U1 BOARD REMOVAL
2-10. APS-202 BOARD REMOVAL
2
1
2
1
– 26 –
XS1RM-Y1010
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
CVBS NTSC System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input CVBS NTSC Color Bar signal into AV1 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) CVBS NTSC EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
SECTION 3 SET-UP ADJUSTMENTS
3-1. CVBS PAL System Adjustment
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
CVBS PAL System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input CVBS PAL Color Bar signal into AV1 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) CVBS PAL EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
3-2. CVBS NTSC System Adjustment
– 27 –
XS1RM-Y1010
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
YC PAL System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input YC PAL Color Bar signal into AV3 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) YC PAL EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
CVBS SECAM System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input CVBS SECAM Color Bar signal into AV1 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) CVBS SECAM EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
3-3. CVBS SECAM System Adjustment
3-4. YC PAL System Adjustment
– 28 –
XS1RM-Y1010
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
YC SECAM System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input YC SECAM Color Bar signal into AV3 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) YC SECAM EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
YC NTSC System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input YC NTSC Color Bar signal into AV3 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) YC NTSC EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
3-5. YC NTSC System Adjustment
3-6. YC SECAM System Adjustment
– 29 –
XS1RM-Y1010
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
YUV (15K) System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input YUV Color Bar signal into AV4 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) YUV EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
CVBS/YC (PAL, SECAM, NTSC), RGB, YUV (15K) System adjustment
RGB System adjustment White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input RGB Color Bar signal into AV1 as shown on Figure (1) Black bar RED 16+-3 (D) EBU Standard Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.XXX-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of chroma decoder Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) RGB EBU Standard Color Bar 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
3-7. RGB System Adjustment
3-8. YUV System Adjustment
– 30 –
XS1RM-Y1010
HDTV COMPONENT 1080i/60Hz System adjustment
White bar RED 216+-3 (A)White bar BLUE 216+-3 (A)
1) Input 1080i/60Hz Color Bar signal into AV4 as shown on Figure (1) Black bar RED 16+-3 (D) Color Bar 100% Luma, 75% Chroma Black bar BLUE 16+-3 (D)
VG828/ASTRO Pattern No.955-OPT 2 No.F Red bar RED 162+-3 (B)2) Perform automatic adjustment of A/D converter Red bar BLUE 16+-3 (B)3) Check that the detection value of R, G, B is in the standard Blue bar RED 16+-3 (C)
shown in the right column. Blue bar BLUE 162+-3 (C)
75% Color Bar
(A) (B) (C) (D)
x x
Wh Ye Cy G Mg R Bl Bk
Cautions The position of (A), (D) excepts
between for / 6 from an edge.
0.700V 2 6
0.525V 62
RED output
0.000V 0 6 (one line)
(A) (B)(C)(D)
0.700V 2 6
Figure (1) 1080i/60Hz Color Bar 100% Luma, 75% Chroma 0.525V 62
BLUE output
0.000V 0 6 (one line)
(A) (B)(C)(D)
3-9. HDTV Component System Adjustment
3-10. White Balance Adjustment
Adjustment of W/B (With internal white signal) Tool, Measuring, Instrument, Component:
1) Turn on the main power of XS1. CS-1000 (Minolta)
2) Execute the MID_H8_ServiceControl.xls
3) H8_INIT/SVC_FLAG/RGBD=3.
4) Adjust W/B of warm Standard 8400k-27MPCDColor tone set to warm (X=0.2943+-0.003)
H8_INIT/SVC_WB/RRTO/warm/ set to FF (Y=0.2840+-0.003)#1 H8_INIT/SVC_WB/GRTO/warm/#1 H8_INIT/SVC_WB/BRTO/warm/#2 Sevice command Direct Select/Service data write(to NVM) -> Send
5) Adjust W/B of normal Standard 11300k-18MPCDColor tone set to normal (X=0.2776+-0.003)
H8_INIT/SVC_WB/RRTO/normal/ set to FF (Y=0.2715+-0.003)#1 H8_INIT/SVC_WB/GRTO/normal/#1 H8_INIT/SVC_WB/BRTO/normal/#2 Sevice command Direct Select/Service data write(to NVM) -> Send
6) Adjust W/B of cool Standard 13500k+0MPCDColor tone set to cool (X=0.2672±0.003)
H8_INIT/SVC_WB/RRTO/cool/ set to FF (Y=0.2718±0.003)#1 H8_INIT/SVC_WB/GRTO/cool/#1 H8_INIT/SVC_WB/BRTO/cool/#2 Sevice command Direct Select/Service data write(to NVM) -> Send
Notes) When BRTO is set to FF and cannot adjust, it adjusts in RRTO.
- 31 -
4-1. BLOCK DIAGRAMS (1)
VIDEO
H2( )INPUTTERMINAL
9
4 3
2 1
L
R
Y/C
J9601
Y/CVBS
PORTC
L FRONT
R FRONT
J9602
7
1
53
HP SW
HP L
HP R
15
11
13
CN9601
TO U1 BOARDCN6003
J9600HEADPHONE
H1 ( )SWITCH
TO A3 BOARDCN4603
5
7
4
3
CN9501KEY 1
KEY 2
P-ON
P-SW(-)
SWITCHS9504, S9505,S9507, S9508
SWITCHS9501, S9502,
S9503
SWITCHS9506
H3 ( )LED & IRRECEIVER
TO A3 BOARDCN4601
PIC OFF14
7
5
4
IC97024 CH ADDRESS
8
15
3
Q9700SWITCH
Q9701SWITCH
Q9702SWITCH
D9704
TIMER
D9703
STBY
D9702
BLUE
RED/GREEN
LEDDRIVERQ9703
D9701
POWER/EPGSTBY
G
R
SWITCHQ9705
VCCOUT
+5VIC9701SIRCS
3
5
6
CN9701POWER LED
IR
SDA
SCL
DAC 4
DAC 3
DAC 2
DAC 0
SWITCHQ9704
H4 ( )LED
1
D9802
CN9801
Q9802
Q9803
Q9804
Q9801
D9801
D9803
D9804
+5V
LOGO2TO A3 BOARD
CN4901
U1 1/2 ( )INPUT TERMINAL,AV SW, AUDIO
11
29
12
IC60131M SRAM
NWE
7
10
9
8
26
6
5
27
28
23
25
4
24
3
31
2
17
13
14
15
21
18
19
20
IC6012AUDIO DELAY DSP
3
4
30
33
32
31
24
29
2
18
13
15
17
40
42
41
46
43
44
45
52
47
48
51
56
53
54
55
60
57
58
59
64
61
62
63
68
65
66
67
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
NOE
I00
I01
I03
I02
I04
I05
I06
I0712-MSP CL
12-MSP WS
12-MSP OUT
12-MSP IN
AKM-CLK
SYS-RST
RQ
SCLK
SI-DSP
SO-DSP
RESET-DSP
DSP-RDY
FAN 1 ERR
FAN 2 ERR
FAN 1 DRIVE
FAN 2 DRIVE
FAN 3 DRIVE
FAN 4 DRIVE
1
4
2
8
11
5
CN6004
914
15
10
FAN CONTROL1
5
4
3
4
2
31
IC6001OP AMP
IC6016VOLTAGE REG
2
6
COINCIDENCE
RESET MSP
5
1311
IC6030OP AMP
7
15
3
16
2
5 1
LINE L5
LINE R5
FIX VAR
IC6031PORT EXPANDER
SP-OUT R27
28
33
34
SP-OUT L
SC2-OUT R
SC2-OUT L
21RESET MSP
7
6
5
4
36
37
54
53
56
57
12-MSP-IN
12-MSP-OUT
12-MSP-WS
12-MSP-CL
TV-R
TV-L
MS-R
MS-L
L MAIN
R MAIN
2
74
3
71
72
67
IC6027MULTI-STANDARD
SOUND PROCESSOR
3
23
10
18
SP PROTQ6015Q6016Q6017
SDA
SCL
SDA
SCL
X6007
6SP R
SP L
OUT 1
OUT 2
14VIC6003
L/R AMP
MUTE
SP PROT
AUDIO CLOCK10
IC6002DIVIDER
11
16
9
51
IC60182 I/P AND GATE
4
60
2
IC6000PLL MSP TO AKM
4
3 16
IC60178 DIVIDER
10
5
11
4
IC6010CLK LEVEL SHIFTER
2
SWITCHQ6014
AKM CLK
FIN B
VCO OUT
5
FIN A
VDD
AMPLIFIER/SWITCH
Q6070, Q6071BUFFER
AMPLIFIERQ6002, Q6003
Q6064
BUFFERAMPLIFIER
Q6067, Q6068,Q6069
TU6000
TO (A)SHEET 2
TO (B)SHEET 2
TO (D)SHEET 2
TO (C)SHEET 2
TO (E)SHEET 2
TO (F)SHEET 2
VIDEO
QSS
FM/AM
SDA
SCL
TO SPEAKERS
MONO IN
IF IN 1
CN6000
- 32 -
4-1. BLOCK DIAGRAMS (2) 4-2. CIRCUIT BOARD LOCATION
4-3. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDSNote :• All capacitors are in µF unless otherwise noted.• pF : µµF 50WV or less are not indicated except for
electrolytic types.• Indication of resistance, which does not have one for
rating electrical power, is as follows.
Pitch : 5mmElectrical power rating : 1/4W
• Chip resistors are 1/10W• All resistors are in ohms.
k = 1000 ohms, M = 1000,000 ohms
• : nonflammable resistor.
• : fusible resistor.
• : internal component.
• : panel designation or adjustment for repair.
• All variable and adjustable resistors have characteristic curve B, unless otherwise noted.
• All voltages are in Volts.• Readings are taken with a 10Mohm digital mutimeter.• Readings are taken with a color bar input signal.• Voltage variations may be noted due to normal production
tolerences.
• : B + bus.
• : B - bus.
• : RF signal path.
• : earth - ground.
• : earth - chassis.
Reference Information
RESISTOR RN : METAL FILM
RC : SOLID
FPRD : NON FLAMMABLE CARBON
FUSE : NON FLAMMABLE FUSIBLE
RS : NON FLAMMABLE METAL OXIDE
RB : NON FLAMMABLE CEMENT
RW : NON FLAMMABLE WIREWOUND
: ADJUSTMENT RESISTOR
COIL LF-8L : MICRO INDUCTOR
CAPACITOR TA : TANTALUM
PS : STYROL
PP : POLYPROPYLENE
PT : MYLAR
MPS : METALIZED POLYESTER
MPP : METALIZED POLYPROPYLENE
ALB : BIPOLAR
ALT : HIGH TEMPERATURE
ALR : HIGH RIPPLE
Les composants identifiés par une trame etpar une marque sont d'une importancecritique pour la sécurité. Ne les remplacerque par des pièces de numéro spécifié.specified.
Note :
The components identified by shadingand marked are critical for safety.Replace only with the part numbers specified in the parts list.
Note :
CVM Board
A Board
S1 Board
VM
C
H
D1A
JA2
N
D
A1D2
C
A
U1
H1
H2
H3
APS202
MS2A
A3
A4
H4
HMP
U1 2/2 ( )INPUT TERMINAL,AV SW, AUDIO
SEL Y OUT27
23
25
26
IC6004YUV SWITCH
R OUT
TO A3 BOARD
1
2
3
6
8
19
20
1
2
3
6
8
10
15
19
20
1
2
3
6
8
19
20
10
B1
A3
B3
A5
B5
A7
A9
A11
B12
A1
B29
B13
B15
B16
B17
B18
B19
B20
A21
B21
B22
A26
B27
A28
A29
4
3
2
J6001 (2/2)
(SCART 1)
J6000
(SCART 3)
J6003
(SCART 2)
R IN
L IN
L OUT
MODE
V OUT
V IN
R OUT
R IN
L IN
L OUT
MODE
AVL
C IN
R OUT
R IN
L IN
L OUT
MODE
V OUT
V IN
V OUT
Y/V IN
AVL
V OUT 2
L OUTL OUT 2
R OUT 2
V OUT 3
L OUT 3
R OUT 3
CVBS-TUN
L-TUN
R-TUN
V IN 3
Y IN 3
C IN 3
L IN 3
R IN 3
MODE 3
AV LINK_SC2
AV LINK_SC3
V IN 1
MODE 1
L IN 1
R IN 1
U SEL
CVBS MAIN
Y SEL
V SEL
FSW SEL
H SEL
V SEL
Y MAIN
C MAIN
CB SEL
Y SEL
CR SEL
FSW OUT
H SEL
V SEL
RESET CD
UP-SW
DSP-RDY
SO-DSP
SI-DSP
SCLK
RQ
RESET DSP
CS
RESET SYS
RS232
SIRCS+3.3V
MS-L
SDA50
SCL50
MS-R
CS
SDA
SCL
CN6002
CN6015
SERVICE
+3.3VSTBY
S6201
BUFFERQ6020
SEL CB OUT
SEL CR OUT BUFFERQ6018
BUFFERQ6019
Y SEL
CB SEL
CR SEL
22
V SEL
H SEL
IC6005EXT CLAMP
1
4 217
20
30
31
SCL
SDA
X6003
41
42
43
7
8
9
4
YUV CR
YUV CB
YUV Y
R
15
J6006
J6001 1/2
11
16
7
R1
B1
G1
CVBS 2
RED
BLUE
GREEN
1
2
3
10
15
11
16
7
R2
B2
G2
CVBS 1
RED
BLUE
GREEN
BLK2
BLK1
J6003 1/2
IC6006AV SWITCH
36
30
22
23
25
26
29
31
20
19
18
17
16
15
13
11
9
8
4
6
2
1V IN 1
L IN 1
R IN 1
MODE 1
V IN 2
L IN 2
R IN 2
MODE 2
V IN 3
L IN 3
Y IN 3
MODE 3
DC OUT
YUV Y
Y CVBS-F
LIN-F
R IN-F
C-F
YUV-L
YUV-R
R IN 3
C IN 3
58
Y OUT 1
C OUT 1 BUFFERQ6030
56
53
63
BUFFERQ6025Q6043
BUFFERQ6022Q6028
SWITCHQ6034
AMPQ6036
64
62
54
52
59
IC6700OP AMP
5
3 161
L DIG
R DIG
41
44
AMPQ6032
AMPQ6023
V OUT 2
7
45
43
40
38
V OUT 3
L TUN
R TUN
V OUT 2
V/Y OUT 3
R OUT 3
L OUT 3
R OUT 2
L OUT 2
V OUT 1
TV-R
TV-L
R-MAIN
L-MAIN
TUN-MAIN
Y MAIN
C MAIN
CVBS MAIN
IC6007MULTIPLEXER/
DEMULTIPLEXER
2
15
13
12
10
1
11FSW-OUT
AV LINK_3
AV LINK_2
FSW SELECT
R IN 2
L IN 2
MODE 2
V IN 2
AVL SEL
AMPQ6037
FSW SCART 22
3
1FSW SCART 1AMP
Q6035
14
15
5
9
10
SDA
SCL
RESET-CD
HP-SW
YC-PORT6
BUFFERQ6073
BUFFERQ6074
MUTE L1
IC6032PORT EXPANDER
15
5
11
13
1
3
7
9
YUV-L
YUV-R
+3.3V
HP-SW
YC PORT
HP_DL
HP_DR
Y CVBS-F
C-F
L IN-F
R IN-F
SW-OUT
LINE L
LINE R
J6004
SWITCHQ6021
BUFFERQ6038
2
5
6
3
+3.3V1
IC6014NAND
7
7
IC6015INVERTER
+3.3V
AMPQ6041Q6040Q6039
3
7
1
5LINE L5
BLK1
BLK2
MUTE L1
MUTE AMP
SW-OUT
LINE-L
LINE-R
IC6701OP AMP
LINE R
LINE L
LINE R5
AV MOUSE
J6501
J6005
CN6003
TO H2 BOARDCN9601
LINE R/R5
TO (A)SHEET 1
TO (B)SHEET 1
TO (E)SHEET 1
TO (C)SHEET 1
TO (D)SHEET 1
TO (F)SHEET 1
CLAMP SW
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 33 -
~ H1 Board Schematic Diagram [ Switch ] ~
3 4
1 2
BLK4P
J9601
L
R
V
J9602
J9600
UDZS-TE17-12BD9600
UDZS-TE17-12BD9601
UDZS-TE17-12BD9602
UDZS-TE17-12BD9603
UDZS-TE17-12BD9604
UDZS-TE17-12BD9605
UDZS-TE17-12BD9607
UDZS-TE17-12BD9606
UDZS-TE17-12BD9608
UDZS-TE17-12BD9609
UDZS-TE17-12BD9610
UDZS-TE17-12BD9611
UDZS-TE17-12BD9612
VD9601XX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
BRN15P
CN9601
Y/CVBS
GND
C
GND
PORT
GND
L_FRONT
GND
R_FRONT
GND
HP_L
GND
HP_R
GND
HP_SW
VD9600XX
XXC9600
XXC9602
VD9603XX
XXC9601
XXC9603
VD9602
XXC9604
XXC9606
XXC9607
XXC9605
CHIP0
R9606100
R9601
1/10W
100R9600
1/10W
100R9602
CHIP0
R9605
JR9601XX
JR9602XX
JR9603XX
JR9604XX
CHIP0
R9604
CHIP0
R9603
H2.-XS1
COMPONENTS MARKED AS XX ARE NOT FITTED TO THIS MODEL
TO U1 BOARDCN6003
H2 INPUT TERMINAL
~ H2 Board Schematic Diagram [ Input Terminal ] ~
1
2
3
4
5
6
7
7PCN9501
GND
STBY5V
P-SW(-)
P-ON
KEY1
GND
KEY2
S9506
S9501
1/10W100
R9501
UDZS-TE17-12BD9501
16V0.1
C9501
XXR9509 R9516
XX XXR9502
1/10W47k
R9512
1/10W10k
R9510
1/10W4.7k
R9511
CHIP0
R9520
S9502 S9503 S9504 S9505 S9507
CHIP
R95030
XXR9517
XXR95191/10W
R95154.7k
XXR9521
XXR95181/10W
R951310k
R9506XX R9507
XXR9508
XX
C9502
R95050
C9504
50V0.01
C9503
50V0.01
S9508
UDZS-TE17-12BD9502
1/10W100
R9514
16V0.1
C9505
A/D TV CH- CH+ AUTO SELECT VOL- VOL+
H1
H1.-XS1
COMPONENTS MARKED AS XX ARE NOT FITTED TO THIS MODEL
XX
SWITCH
TO A3 BOARDCN4603
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 34 -
~ H1 Printed Wiring Board Conductor Side A ~
~ H1 Printed Wiring Board Conductor Side B ~
~ H2 Printed Wiring Board Conductor Side A ~
~ H2 Printed Wiring Board Conductor Side B ~
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 35 -
~ H4 Board Schematic Diagram [ LED ] ~
~ H3 Board Schematic Diagram [ LED & IR Receiver ] ~
H3.-XS1
H3COMPONENTS MARKED AS XX ARE NOT FITTED TO THIS MODEL
LED & IR RECEIVER
470
CN4601TO A3 BOARD
1
2
3
GRY3P
CN9801
+5V
LOGO
GND
XXC9801
NSPW515BSA0D9801
NSPW515BSA0D9802
NSPW515BSA0D9803
NSPW515BSA0D9804
DTC114EUA-T106Q9801
DTC114EUA-T106Q9802
DTC114EUA-T106Q9803
DTC114EUA-T106Q9804
R9801
1/10W100
R9802
1/10W100
R9803
1/10W100
R9804
1/10W100
D9805XX
D9806XX
D9807 XX
D9808XX
H4.-XS1
COMPONENTS MARKED AS XX ARE NOT FITTED TO THIS MODEL
H4 LED
TO A3 BOARDCN4901
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 36 -
~ H4 Printed Wiring Board Conductor Side A ~
~ H4 Printed Wiring Board Conductor Side B ~
~ H3 Printed Wiring Board Conductor Side A ~
~ H3 Printed Wiring Board Conductor Side B ~
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 37 -
~ U1 Board Schematic Diagram [ Input Terminal, AV SW, Audio ] Page 1/6 ~
COMPONENTS MARKED AS XX ARE NOT FITTED ON THIS MODEL
INPUT TERMINAL, AV SW, AUDIO
U1.-XS1
U1 1/6
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 38 -
~ U1 Board Schematic Diagram [ Input Terminal, AV SW, Audio ] Page 2/6 ~
C61760.2216V
COMPONENTS MARKED AS XX ARE NOT FITTED ON THIS MODEL
U1.-XS1
U1 2/6
TP1
TP2
50us/div 50us/div
U1(2/6) Board Waveforms
420mVp-p (H) 235mVp-p (H)
TP1 TP2
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 39 -
COMPONENTS MARKED AS XX ARE NOT FITTED ON THIS MODEL
U1.-XS1
U1 3/6
~ U1 Board Schematic Diagram [ Input Terminal, AV SW, Audio ] Page 3/6 ~
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 40 -
COMPONENTS MARKED AS XX ARE NOT FITTED ON THIS MODELTO H2 BOARD
CN9601
JR6004
U1.-XS1
U1 4/6
~ U1 Board Schematic Diagram [ Input Terminal, AV SW, Audio ] Page 4/6 ~
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 41 -
~ U1 Board Schematic Diagram [ Input Terminal, AV SW, Audio ] Page 5/6 ~
0UHFB6037
C60422.250V
0UH
AR5E
COMPONENTS MARKED AS XX ARE NOT FITTED ON THIS MODEL
NJM2123M
U1.-XS1
U1 5/6
TP1
100ns/div
U1(5/6) Board Waveform
2.9Vp-p (H)
TP1
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 42 -
COMPONENTS MARKED AS XX ARE NOT FITTED ON THIS MODEL
U1.-XS1
U1 6/6
~ U1 Board Schematic Diagram [ Input Terminal, AV SW, Audio ] Page 6/6 ~
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 43 -
~ U1 Printed Wiring Board Conductor Side A ~
~ U1 Board Semiconductor Location Table Side A ~
EDOID 4006CI 7-E 8106CI 5-F ROTSISNART 4306Q 7-H
6306D 6-I 5006CI 6-E 9106CI 3-G 2006Q 5-G 5306Q 7-F
2406D 2-B 6006CI 6-H 6206CI 2-I 3006Q 5-F 7306Q 7-E
4806D 2-I 7006CI 7-F 7206CI 5-E 4106Q 4-D 8306Q 01-D
6806D 2-C 8006CI 4-D 8206CI 5-D 8106Q 7-E 2406Q 6-E
7806D 2-C 0106CI 4-F 1306CI 3-C 9106Q 7-D 3406Q 5-G
7906D 4-G 2106CI 4-E 1016CI 7-F 0206Q 7-D 4606Q 3-G
CI 4106CI 9-E 2016CI 3-E 2206Q 5-G 7606Q 3-G
0006CI 4-F 5106CI 9-E 0076CI 7-G 5206Q 5-G 8606Q 3-G
1006CI 2-B 6106CI 3-B 1076CI 8-D 8206Q 5-G 9606Q 3-H
3006CI 6-C 7106CI 4-G 0086CI 5-E 0306Q 6-G 1706Q 2-H
~ U1 Board IC Voltage Table ~
oNfeR oNniP )V(stloVfeR
oNoNniP )V(stloV
feRoN
oNniP )V(stloVfeR
oNoNniP )V(stloV
0006CI
1 0.3
6006CI
25 5.4
2106CI
05 1.5
7206CI
31-11 0.5
2 0 35 7.4 35-15 0 02-41 0
3 4.1 45 5.4 45 1.5 12 9.4
5-4 0 55 8.3 55 0 03-42 0
6 4.1 65 3.3 75-65 1.5 43-33 8.3
11-7 0 75 0 95-85 0 53 0
21 4.1 85 3.4 06 1.5 73-63 8.3
31 3.2 95 5.4 96-16 0 83 0.7
41 0.3 06 4.4 17-07 1.5 17-07 1.5
1006CI
1 9.3 46-16 5.4 87 0 93 9.7
2 0
8006CI
3-1 5.4 18 0 04 0.7
3 9.3 4 0 38-28 5.2 44-34 0
4 9.3 7-5 5.4 48 0 84-54 8.3
5 7.9 8 1.9 68-58 5.2 94 0
4006CI
3-1 9.2
2106CI
4-2 1.5 98-78 0 15-05 8.3
5.4 1.1 5 0 19-09 1.5 25 0
6 0 6 1.5 29 5.2 45-35 8.3
9-7 9.2 51-7 0 49-39 0 55 0
11-01 1.1 71 5.2 69-59 1.5 75-65 8.3
21 0.5 81 3.2
6106CI
1 7.9 85 6.2
41-31 4.2 02 0 2 6.2 06 8.3
51 0.2 12 1.5 3 9.6 26-16 0
61 4.2 32-22 0 4 6.2 66-56 1.5
71 0.5 42 6.2 5 0 86-76 5.1
81 0.1 52 3.2
7106CI
5 0 07-96 0
02 0.3 82-62 0 7-6 5.1 27-17 4.2
42-22 0 13-92 0.5 8 0 37 0
62-52 0.1 63-23 0 9 5.1 47 6.2
72 7.0 73 1.5 01 4.1 97-77 0
82 0.5 04 1.5 11 2.0 08 1.5
92 7.4 14 0 61 0.3
0086CI
1 1.4
03 0 24 1.5
7206CI
3-2 4.4 2 1.9
5006CI
3-1 0 44-34 0 4 3.2 3 1.4
4 0.5 74-54 1.5 5 5.2 5 3.5
5 0.5 94-84 0 7-6 0 8 3.5
feR )s()e( )g()b( )d()c( feR )s()e( )g()b( )d()c( feR )s()e( )g()b( )d()c( feR )s()e( )g()b( )d()c( feR )s()e( )g()b( )d()c( feR )s()e( )g()b( )d()c( feR )s()e( )g()b( )d()c(
2006Q 4.3 8.2 0 4106Q 0 0 5.0 5206Q 7.2 3.3 1.9 0306Q 7.3 3.4 1.9 3406Q 0.2 7.2 1.9 7606Q 6.2 9.1 0 1706Q 1.5 9.4 9.0
3006Q 8.2 4.3 1.9 2206Q 7.2 3.3 1.9 8206Q 5.3 1.4 1.9 2406Q 6.2 0.2 0 4606Q 7.2 1.2 0 8606Q 9.1 6.2 4.4 2706Q 6.2 0.2 0
~ U1 Board Semiconductor Voltage Table ~
A B C D E F G H I J K L M N
1
2
3
4
5
6
7
8
9
10
11
O
- 44 -
~ U1 Printed Wiring Board Conductor Side B ~ ~ U1 Board Semiconductor Location Table Side B ~
EDOID 5206D 4-C 1506D 8-E 6706D 5-F 2306CI 7-F
1006D 8-B 6206D 4-D 2506D 8-E 7706D 5-F ROTSISNART
4006D 8-B 7206D 4-D 3506D 8-E 0806D 5-C 1006Q 3-G
5006D 8-B 8206D 8-B 4506D 9-C 2806D 8-D 5106Q 4-I
6006D 9-B 9206D 8-D 5506D 9-C 3906D 7-G 6106Q 4-I
7006D 9-B 0306D 8-D 6506D 8-C 4906D 6-G 7106Q 4-H
8006D 8-B 1306D 8-D 7506D 8-C 5906D 8-E 1206Q 9-F
9006D 8-B 2306D 8-D 8506D 9-C 6906D 8-E 3206Q 6-C
0106D 9-B 3306D 7-B 9506D 9-C 1036D 8-C 2306Q 6-C
1106D 9-B 4306D 7-B 0606D 9-C 1056D 8-F 6306Q 6-D
2106D 9-B 7306D 8-B 1606D 9-C 2056D 9-F 9306Q 9-G
3106D 9-B 8306D 8-D 2606D 8-D 3056D 4-F 0406Q 8-G
4106D 8-D 9306D 6-B 4606D 9-B 1066D 7-F 1406Q 8-G
5106D 9-D 0406D 7-D 5606D 9-B 2066D 8-G 2706Q 5-C
6106D 8-D 1406D 8-D 6606D 8-G 3066D 5-F 3706Q 5-D
7106D 9-D 3406D 8-C 7606D 8-G 4066D 8-F 4706Q 5-D
8106D 9-D 4406D 7-C 8606D 8-G CI 5706Q 5-D
9106D 9-D 5406D 7-C 9606D 8-G 2006CI 5-E 6706Q 5-D
0206D 9-D 6406D 8-C 0706D 8-F 3006CI 4-H 7706Q 8-G
1206D 9-D 7406D 8-C 1706D 8-F 3106CI 3-E 8706Q 5-G
2206D 9-D 8406D 8-C 2706D 8-F 6106CI 2-I 9706Q 8-G
3206D 5-D 9406D 8-C 3706D 8-F 8206CI 5-F 0806Q 8-F
4206D 4-D 0506D 8-E 5706D 9-E 0306CI 5-F 1806Q 8-G
- 45 -
XS1RM-Y1010
IC AK7716VT
IC L88M05T-FA-TL
IC BA09FP-E2
IC CXA1875AM-T4IC NJM4558V-TE2IC TDA2822D013TRIC TLC2932IPWR
IC CXA2069Q-TL
IC GP1UM27SRK
IC CXA2171AQ-T6
IC K6X1008C2D-BF70T
IC MC74LVXT4053DTR2IC NJM2123M (T1)
IC MSP3411G-QA-B11
IC NJM2125F(TE2)IC TC7SET02FU(TE85R)IC TC7SET04FU(TE85R1)IC TC7SZ08FU(TE85R)
IC NJM2374AM-TE2IC TC7WH00FU(TE12R)IC TC7WHU04FU(TE12R)
IC PQ20RX11J00H
IC TAR5S30(TE85R)
IC TDA7490L
IC UPC1093J-1-T1 TOP VIEW 68 61
60
1
52
44
433527
26
18
10
9
( TOP VIEW )
REF
ANODECATHODE
1
16 17
321
100
25
26 50
51
75
76
( TOP VIEW )
1 8
16 9
56
7
12 3
4
IN
GNDOUT
2SA1037AK-T146-R2SA1162-G2SC1623-L5L6DTC144EEMSB709-RT1
E
B
C
MA111-TXMM3Z12VT1MM3Z3V9T1MM3Z6V8T1MMDL914T1UDZ-TE-17-8.2BUDZS-TE17-12B
RK14V1
CATHODE
ANODE
CATHODE
ANODE
4-4. SEMICONDUCTORS
- 46 -
XS1RM-Y1010
4-5 IC BLOCK DIAGRAMS
DFP60
59
56
57
SBUS Interface
IDENT
A/D
SCART Switching Facilities
A/D
D/A
D/A
D/A
D/A
D/A
D/A
I2C Interface
25
23
65 68 13 45 7 6
48
50
51
47
30
34
31
28
33
37
36
DEMODULATOR
U1 BOARD IC6027 MSP3411G
U1 BOARD IC6004 CXA2171AQ-T6
27 SELY_OUT
26 SELCB_OUT
25 SELCR_OUT
17 CLP_SW
20 EXTCLK/XTAL
18
IRE
F
29
CLP
_CR
40
Vcc
1
48
GN
D1
28
Vcc
2
24G
ND
212
Vcc
3
6
GN
D3
23 SELV_OUT
33IN1_1
34IN1_2
35IN1_3
36IN1_H/L1
37IN1_V/L2
38IN1_L3
39IN1_SW
6dB
PEAKHOLD
LEVELDET.
POLARITYDISTINCT.
V SYNCSEP.
SYNCSEP.
I2C busDEC.
YPbPr → YCbCr(CCIR)
MATRIXSELECTORYPbPr → YCbCr
(BTA)
RGB → YCbCr
41IN2_1
42IN2_2
43IN2_3
44IN2_H/L1
45IN2_V/L2
46IN2_L3
47IN2_SW
1IN3_1
2IN3_2
3IN3_3
4IN3_H
5IN3_V
7IN4_1
8IN4_2
9IN4_3
10IN4_H
11
15 16 13 14
IN4_V
IN1 IN4SELECTOR
∗ INPUT_SEL (2)∗ SELSTB_1 (1)∗ SELSTB_2 (1)+ DECL1_1 (2)+ DECL2_1 (2)+ DECL3_1 (2)+ DECSW_1 (1)+ DECL1_2 (2)+ DECL2_2 (2)+ DECL3_2 (2)DECSW_2 (1)
+ EH (1)+ EV (1)
∗ HD_TC (1)∗ HSEP_SEL (1) ∗ V_TC (2)
∗ MAT_OUT (2)
+3-STATE (1)
∗ YGAIN (4)∗ CBGAIN (4)∗ CRGAIN (4)
∗ CLK_SEL (1)
∗ GAIN_SEL (2)Y Y/Cb/Cr
Cb/Cr
10
H
V
H SYNCWIDTH
MACROVISION
22 SELH_OUT
DUMMYSYNC
CLOCKGEN.
CLAMP
CLAMP
CLP&
3SYNCP
3STATESYNCDET.
H_P
H
YG
_IN
YG
_OU
T
V_P
H
∗ HYSW (1)
SYNCCOUNTER
PRIORITY RANK
HV > CS > Y/G
6dBAMP.
H
V
H
V
H
V
0
1
01
2, 3
0
1
2
3
∗ H_WIDTH (2)∗ MACRO (1)
∗ HS_MASK (1)∗ FIX_SYNC (2)
∗ SELDUM (1)+ H_NUMBER_H (2)+ H_NUMBER_L (8)+ V_NUMBER_H (2)+ V_NUMBER_L (8)
30 31 32
SC
L
SD
A
AD
DR
ES
S
XS1RM-Y1010
SECTION 5EXPLODED VIEWS
NOTE :
Items with no part number and no description are not stocked because they are seldom required for routine service. The construction parts of an assembled part are indicated with a collation number in the remarks column.
Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
5-1. REAR COVER AND STAND
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 47 -
1 X-2021-896-2 COVER, REAR (37) ASSY (KE-P37XS1) 2 X-2021-895-2 COVER, REAR (42) ASSY (KE-P42XS1) 22 4-102-644-01 COVER (42), STAND BASE PAINTED3 4-098-263-01 CAP (42), STAND4 4-098-260-01 FRAME (42A), STAND BASE5 4-098-262-03 BRACKET (42), STAND BASE6 4-098-259-02 PLATE (42), STAND BASE
7 4-098-261-01 FRAME (42B), STAND BASE8 *4-098-264-01 CUSHION A9 *7-682-000-07 SCREW +PSW M5X1210 7-682-973-09 SCREW +PSW 5X811 7-685-647-79 SCREW +BVTP 3X10 TYPE2 IT-312 *X-4043-041-1 BRACKET, RF ASSY
2
3
4
5
6
7
8
1
9
10
11
12
o 7-685-663-79 SCREW +BVTP 4X16 TYPE2 IT-3m 7-682-947-09 SCREW +PSW 3X6s 7-682-962-09 SCREW +PSW 4X10u 7-682-973-19 SCREW +PSW 5X10
o
m
s
u
o
o
o
o m
10
m
XS1RM-Y1010
5-2. DISPLAY PANEL, BOARDS, AND SPEAKERS
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 48 -
51 A-1606-620-A FRONT, PANEL ASSY (KE-P37XS1) 52-53 A-1606-605-A FRONT, PANEL ASSY (KE-P42XS1) 52-5352 1-758-986-21 GLASS, OPTICAL FILTER (KE-P37XS1) 1-758-985-21 GLASS, OPTICAL FILTER (KE-P42XS1)53 4-098-128-11 SHEET (FG) (KE-P37XS1) 4-098-128-01 SHEET (FG) (KE-P42XS1)54 *1-805-365-21 PLASMA DISPLAY PANEL (KE-P37XS1) *1-805-349-11 PLASMA DISPLAY PANEL (KE-P42XS1)55 4-102-271-01 BOX SPEAKER(37 FRONT-R)PAINTED (KE-P37XS1) 4-102-235-01 BOX SPEAKER(42 FRONT-R)PAINTED (KE-P42XS1)56 *A-1410-928-A H1 BOARD, COMPLETE57 *4-098-112-01 SPRING, COMPRESSION58 4-102-231-01 BUTTON, POWER59 4-102-232-01 COVER, CONTROL PANEL PRINTED60 4-098-111-12 ORNAMENT (MS)
61 X-4042-973-1 BUTTON MULTI ASSY62 *4-098-110-01 GUIDE LIGHT (MS)63 A-1606-623-A SPEAKER (37R) ASSY (KE-P37XS1) 64-65 A-1606-608-A SPEAKER (42R) ASSY (KE-P42XS1) 64-6564 1-825-610-12 LOUDSPEAKER (5CM)65 1-825-609-11 LOUDSPEAKER (5.5X12CM)66 X-4042-983-1 FILTER GLASS BRACKET (37) ASSY (KE-P37XS1) X-4042-968-1 FILTER GLASS BRACKET (42) ASSY (KE-P42XS1)67 X-4042-760-3 BAR (BOTTOM) 37 ASSY (KE-P37XS1) X-4042-754-3 BAR (BOTTOM) 42 ASSY (KE-P42XS1)68 *A-1410-935-A H4 BOARD, COMPLETE69 *A-1410-934-A H3 BOARD, COMPLETE70 *4-098-165-01 CLAMPER71 £ *1-816-517-21 INLET, AC (WITH NOISE FILTER)72 *A-1302-996-A MS2A BOARD COMPLETE
80
52
56
53
54
57
58
59
61
63
64
65
6667
68
69
7172
74
76
84 8586
91
92
8355
62
77
70
73
75
7982
8788
89
60
ll
l 7-685-648-79 SCREW +BVTP 3X12 TYPE2 IT-3o 7-685-663-79 SCREW +BVTP 4X16 TYPE2 IT-3u 4-678-370-01 SCREW (M3X8), CROSS (HOLE) PANs 3-703-136-11 SCREW, TAPPINGm 7-682-947-09 SCREW +PSW 3X6
o
oo
u
m
l
m
m
m
m
l
ll
l
l
s
51
78
81
64
65
90
9188
5483
XS1RM-Y1010
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 49 -
73 X-2022-021-1 BRACKET, U-PWB (A) ASSY74 *A-1302-881-A U1 BOARD, COMPLETE75 *3-919-255-01 HOLDER, PC BOARD76 X-4042-985-2 SPEAKER REAR (37R) ASSY (KE-P37XS1) 77 X-4042-970-2 SPEAKER REAR (42R) ASSY (KE-P42XS1) 7777 4-102-273-02 BOX SPEAKER (37 REAR-R)PAINTED (KE-P37XS1) 4-102-215-02 BOX SPEAKER (42 REAR-R)PAINTED (KE-P42XS1)78 X-4042-987-1 SPEAKER COVER (37R) ASSY (KE-P37XS1) X-4042-972-1 SPEAKER COVER (42R) ASSY (KE-P42XS1)79 X-4042-984-1 SPEAKER REAR (37L) ASSY (KE-P37XS1) 80 X-4042-969-1 SPEAKER REAR (42L) ASSY (KE-P42XS1) 8080 4-102-272-01 BOX SPEAKER (37 REAR-L)PAINTED (KE-P37XS1) 4-102-214-01 BOX SPEAKER (42 REAR-L)PAINTED (KE-P42XS1)81 X-4042-986-1 SPEAKER COVER (37L) ASSY (KE-P37XS1) X-4042-971-1 SPEAKER COVER (42L) ASSY (KE-P42XS1)
82 A-1606-622-A SPEAKER (37L) ASSY (KE-P37XS1) 64-65 A-1606-607-A SPEAKER (42L) ASSY (KE-P42XS1) 64-6583 4-098-215-02 MAIN FRM (37) ASSY (KE-P37XS1) 4-098-145-02 MAIN FRM (42) ASSY (KE-P42XS1)84 4-098-094-03 LID (CONNECTOR PANEL)85 4-102-233-01 COVER, CONNECTOR PANEL PRINTED86 *A-1410-929-A H2 BOARD, COMPLETE87 1-468-794-31 REGULATOR, SWITCHING88 4-087-569-02 SPACER89 4-102-270-01 BOX SPEAKER (37FRONT-L)PAINTED (KE-P37XS1) 4-102-220-01 BOX SPEAKER (42FRONT-L)PAINTED (KE-P42XS1)90 A-1606-627-A PANEL ASSY (KE-P37XS1) 54, 83, 88, 91 A-1606-612-A PANEL ASSY (KE-P42XS1) 54, 83, 88, 9191 1-763-659-11 FAN, DC92 X-4042-982-1 BAR (TOP, 37A) ASSY X-4042-967-1 BAR (TOP, 42A) ASSY
SECTION 6ELECTRICAL PARTS LIST
PARTS LISTING TABLE OF CONTENTS
- 50 -
Note : Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. Parts indicated (XX) on the Schematic Diagram are not used in this model and therefore do not appear in the Parts List.
H1 BOARD COMPLETE Parts List : .................................................................................................... 51
H2 BOARD COMPLETE Parts List : .................................................................................................... 51
U1 BOARD COMPLETE Parts List : .................................................................................................... 51
H3 BOARD COMPLETE Parts List : .................................................................................................... 62
H4 BOARD COMPLETE Parts List : .................................................................................................... 62
MISCELLANEOUS : .................................................................................................... 63
ACCESSORIES AND PACKAGING MATERIALS : ...................................................................................... 63
REMOTE COMMANDER: .................................................................................................... 63
Page
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 51 -
* A-1410-928-A H1 Board Complete
< CAPACITOR >
C9501 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC9503 1-162-974-11 CERAMIC CHIP 0.01UF 50VC9504 1-162-974-11 CERAMIC CHIP 0.01UF 50VC9505 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V
< CONNECTOR >
CN9501 1-770-624-21 PIN, CONNECTOR 7P
< DIODE >
D9501 8-719-083-82 DIODE UDZS-TE17-12BD9502 8-719-083-82 DIODE UDZS-TE17-12B
< RESISTOR >
R9501 1-216-809-11 METAL CHIP 100 5% 1/10WR9503 1-216-864-11 SHORT CHIP 0R9505 1-216-864-11 SHORT CHIP 0R9510 1-216-833-11 METAL CHIP 10K 5% 1/10WR9511 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R9512 1-216-841-11 METAL CHIP 47K 5% 1/10WR9513 1-216-833-11 METAL CHIP 10K 5% 1/10WR9514 1-216-809-11 METAL CHIP 100 5% 1/10WR9515 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR9520 1-216-864-11 SHORT CHIP 0
< SWITCH >
S9501 1-572-595-11 SWITCH, TACTIL (REFLOW TYPE)S9502 1-572-595-11 SWITCH, TACTIL (REFLOW TYPE)S9503 1-572-595-11 SWITCH, TACTIL (REFLOW TYPE)S9504 1-572-595-11 SWITCH, TACTIL (REFLOW TYPE)S9505 1-572-595-11 SWITCH, TACTIL (REFLOW TYPE)
S9506 1-554-419-00 SWITCH, PUSH (1 KEY)S9507 1-572-595-11 SWITCH, TACTIL (REFLOW TYPE)S9508 1-572-595-11 SWITCH, TACTIL (REFLOW TYPE)
* A-1410-929-A H2 Board Complete
< CONNECTOR >
CN9601 1-695-209-21 PIN, CONNECTOR (PC BOARD) 15P
< DIODE >
D9600 8-719-083-82 DIODE UDZS-TE17-12BD9601 8-719-083-82 DIODE UDZS-TE17-12BD9602 8-719-083-82 DIODE UDZS-TE17-12BD9603 8-719-083-82 DIODE UDZS-TE17-12BD9604 8-719-083-82 DIODE UDZS-TE17-12B
D9605 8-719-083-82 DIODE UDZS-TE17-12B
D9606 8-719-083-82 DIODE UDZS-TE17-12BD9607 8-719-083-82 DIODE UDZS-TE17-12BD9608 8-719-083-82 DIODE UDZS-TE17-12BD9609 8-719-083-82 DIODE UDZS-TE17-12BD9610 8-719-083-82 DIODE UDZS-TE17-12B
D9611 8-719-083-82 DIODE UDZS-TE17-12BD9612 8-719-083-82 DIODE UDZS-TE17-12B
< SOCKET >
J9600 1-568-267-11 JACKJ9601 1-565-666-12 TERMINAL, S 4PJ9602 1-580-443-11 JACK, PIN 3P
< RESISTOR >
R9600 1-216-809-11 METAL CHIP 100 5% 1/10WR9601 1-216-809-11 METAL CHIP 100 5% 1/10WR9602 1-216-809-11 METAL CHIP 100 5% 1/10WR9603 1-216-864-11 SHORT CHIP 0R9604 1-216-864-11 SHORT CHIP 0
R9605 1-216-864-11 SHORT CHIP 0R9606 1-216-864-11 SHORT CHIP 0
* A-1302-881-A U1 Board Complete
4-097-829-01 HEAT SINK (K) 4-382-854-01 SCREW (M3X8), P, SW (+)
< CAPACITOR >
C6000 1-126-603-11 ELECT CHIP 4.7UF 20.00% 35VC6003 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25VC6004 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC6005 1-163-077-00 CERAMIC CHIP 0.1UF 10.00% 25VC6006 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6007 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6009 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6011 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6012 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC6013 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6015 1-126-204-11 ELECT CHIP 47UF 20.00% 16VC6016 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6017 1-216-864-11 SHORT CHIP 0C6018 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6020 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6021 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC6022 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25VC6023 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6031 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC6032 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6033 1-162-928-11 CERAMIC CHIP 120PF 5.00% 50VC6034 1-128-996-11 ELECT CHIP 4.7UF 20% 50V
U1H2H1
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 52 -
C6035 1-162-906-11 CERAMIC CHIP 1.5PF 0.25PF 50VC6036 1-128-996-11 ELECT CHIP 4.7UF 20% 50VC6039 1-162-906-11 CERAMIC CHIP 1.5PF 0.25PF 50VC6041 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6042 1-126-601-11 ELECT CHIP 2.2UF 20.00% 50V
C6043 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6086 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25VC6087 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25VC6089 1-137-190-91 FILM 0.22UF 5.00% 50VC6090 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25V
C6091 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50VC6092 1-115-185-11 CERAMIC CHIP 0.033UF 10.00% 50VC6093 1-136-175-00 FILM 0.68UF 5.00% 50VC6095 1-126-957-11 ELECT 0.22UF 20.00% 50VC6096 1-136-175-00 FILM 0.68UF 5.00% 50V
C6098 1-163-133-00 CERAMIC CHIP 470PF 5.00% 50VC6099 1-163-102-00 CERAMIC CHIP 24PF 5.00% 50VC6100 1-126-941-11 ELECT 470UF 20.00% 25VC6101 1-137-190-91 FILM 0.22UF 5.00% 50VC6102 1-163-133-00 CERAMIC CHIP 470PF 5.00% 50V
C6103 1-126-204-11 ELECT CHIP 47UF 20.00% 16VC6105 1-124-252-00 ELECT 0.33UF 20.00% 50VC6106 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25VC6107 1-163-263-11 CERAMIC CHIP 330PF 5.00% 50VC6109 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6112 1-163-263-11 CERAMIC CHIP 330PF 5.00% 50VC6113 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6114 1-126-933-11 ELECT 100UF 20.00% 16VC6115 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25VC6116 1-163-133-00 CERAMIC CHIP 470PF 5.00% 50V
C6117 1-124-252-00 ELECT 0.33UF 20.00% 50VC6118 1-163-133-00 CERAMIC CHIP 470PF 5.00% 50VC6119 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50VC6120 1-126-055-11 ELECT 470UF 20.00% 50VC6121 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25V
C6122 1-115-185-11 CERAMIC CHIP 0.033UF 10.00% 50VC6123 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50VC6124 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25VC6125 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6127 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6128 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25VC6129 1-165-738-31 ELECT 2700UF 20% 25VC6130 1-165-738-31 ELECT 2700UF 20% 25VC6131 1-115-339-11 CERAMIC CHIP 0.1UF 10.00% 50VC6133 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6134 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6135 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6136 1-126-206-11 ELECT CHIP 100UF 20.00% 6.3VC6137 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6138 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6139 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6140 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6141 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6142 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6143 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6144 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6145 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6146 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6147 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6148 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6149 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6150 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6151 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6152 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6153 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6154 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6155 1-126-206-11 ELECT CHIP 100UF 20.00% 6.3VC6156 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6157 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6158 1-127-573-11 CERAMIC CHIP 1UF 10% 16V
C6159 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6160 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6161 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6162 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6163 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6164 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6165 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6166 1-125-837-91 CERAMIC CHIP 1UF 10% 6.3VC6167 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6168 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6169 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6170 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6171 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6172 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6173 1-124-779-00 ELECT CHIP 10UF 20.00% 16V
C6174 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6175 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6176 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6178 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6182 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6183 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6184 1-125-889-91 CERAMIC CHIP 2.2UF 10% 10VC6185 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6186 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6187 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6188 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6189 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6190 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6191 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6192 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
U1
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 53 -
C6193 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6194 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6195 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6196 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6197 1-124-779-00 ELECT CHIP 10UF 20.00% 16V
C6199 1-126-055-11 ELECT 470UF 20.00% 50VC6200 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25VC6204 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6205 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6210 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6212 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6246 1-128-994-21 ELECT CHIP 47UF 20% 10VC6248 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6249 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6250 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6251 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6252 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6253 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6254 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6255 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6256 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6257 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6258 1-162-919-11 CERAMIC CHIP 22PF 5.00% 50VC6260 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6261 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6263 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6264 1-124-779-00 ELECT CHIP 10UF 20.00% 16VC6265 1-125-889-91 CERAMIC CHIP 2.2UF 10% 10VC6266 1-125-889-91 CERAMIC CHIP 2.2UF 10% 10VC6267 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50V
C6268 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC6269 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6270 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC6271 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6272 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50V
C6273 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6274 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC6275 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6276 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6277 1-125-889-91 CERAMIC CHIP 2.2UF 10% 10V
C6278 1-125-889-91 CERAMIC CHIP 2.2UF 10% 10VC6279 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6280 1-126-204-11 ELECT CHIP 47UF 20.00% 16VC6281 1-126-204-11 ELECT CHIP 47UF 20.00% 16VC6282 1-164-505-11 CERAMIC CHIP 2.2UF 16V
C6283 1-125-891-11 CERAMIC CHIP 0.47UF 10.00% 10VC6284 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6285 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6286 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6287 1-164-505-11 CERAMIC CHIP 2.2UF 16V
D1 U1
C6288 1-125-891-11 CERAMIC CHIP 0.47UF 10.00% 10VC6289 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6290 1-125-889-91 CERAMIC CHIP 2.2UF 10% 10VC6291 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6292 1-164-392-11 CERAMIC CHIP 390PF 5.00% 50V
C6293 1-164-392-11 CERAMIC CHIP 390PF 5.00% 50VC6294 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6295 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC6296 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6297 1-164-505-11 CERAMIC CHIP 2.2UF 16V
C6298 1-128-991-21 ELECT CHIP 10UF 20% 50VC6299 1-128-991-21 ELECT CHIP 10UF 20% 50VC6300 1-128-991-21 ELECT CHIP 10UF 20% 50VC6301 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6302 1-126-204-11 ELECT CHIP 47UF 20.00% 16V
C6303 1-126-204-11 ELECT CHIP 47UF 20.00% 16VC6304 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6305 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6306 1-125-889-91 CERAMIC CHIP 2.2UF 10% 10VC6307 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6308 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6309 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC6310 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6311 1-162-968-11 CERAMIC CHIP 0.0047UF 10.00% 50VC6312 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50V
C6313 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6457 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6458 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6462 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50VC6463 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6464 1-162-923-11 CERAMIC CHIP 47PF 5.00% 50VC6465 1-128-360-11 ELECT CHIP 220UF 20.00% 10VC6466 1-162-962-11 CERAMIC CHIP 470PF 10.00% 50VC6467 1-128-996-11 ELECT CHIP 4.7UF 20% 50VC6470 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6473 1-162-928-11 CERAMIC CHIP 120PF 5.00% 50VC6474 1-163-084-00 CERAMIC CHIP 1.5PF 0.25PF 50VC6475 1-163-084-00 CERAMIC CHIP 1.5PF 0.25PF 50VC6476 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6477 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25V
C6478 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6479 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6480 1-216-864-11 SHORT CHIP 0C6481 1-115-416-11 CERAMIC CHIP 0.001UF 5.00% 25VC6482 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6483 1-126-204-11 ELECT CHIP 47UF 20.00% 16VC6484 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC6485 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6486 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6487 1-124-779-00 ELECT CHIP 10UF 20.00% 16V
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 54 -
C6555 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6706 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6709 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6800 1-126-935-11 ELECT 470UF 20.00% 16VC6801 1-128-992-21 ELECT CHIP 47UF 20% 25V
C6802 1-128-992-21 ELECT CHIP 47UF 20% 25VC6803 1-128-992-21 ELECT CHIP 47UF 20% 25VC6804 1-128-992-21 ELECT CHIP 47UF 20% 25VC6805 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC6806 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V
C6808 1-126-935-11 ELECT 470UF 20.00% 16V
< CONNECTOR >
CN6000 * 1-564-507-11 PLUG, CONNECTOR 4PCN6001 * 1-564-510-11 PLUG, CONNECTOR 7PCN6002 * 1-816-933-21 CONNECTOR, BOARD TO BOARD 60PCN6003 1-695-209-21 PIN, CONNECTOR (PC BOARD) 15PCN6004 * 1-695-890-21 PIN, CONNECTOR (PC BOARD) 12P
CN6015 * 1-564-508-11 PLUG, CONNECTOR 5P
< DIODE >
D6001 8-719-081-98 DIODE MM3Z6V8T1D6004 8-719-081-98 DIODE MM3Z6V8T1D6005 8-719-082-01 DIODE MM3Z12VT1D6006 8-719-083-82 DIODE UDZS-TE17-12BD6007 8-719-083-82 DIODE UDZS-TE17-12B
D6008 8-719-083-82 DIODE UDZS-TE17-12BD6009 8-719-083-82 DIODE UDZS-TE17-12BD6010 8-719-083-82 DIODE UDZS-TE17-12BD6011 8-719-083-82 DIODE UDZS-TE17-12BD6012 8-719-083-82 DIODE UDZS-TE17-12B
D6013 8-719-083-82 DIODE UDZS-TE17-12BD6014 8-719-082-01 DIODE MM3Z12VT1D6015 8-719-083-82 DIODE UDZS-TE17-12BD6016 8-719-083-82 DIODE UDZS-TE17-12BD6017 8-719-083-82 DIODE UDZS-TE17-12B
D6018 8-719-083-82 DIODE UDZS-TE17-12BD6019 8-719-083-82 DIODE UDZS-TE17-12BD6020 8-719-083-82 DIODE UDZS-TE17-12BD6021 8-719-083-82 DIODE UDZS-TE17-12BD6022 8-719-083-82 DIODE UDZS-TE17-12B
D6023 8-719-083-82 DIODE UDZS-TE17-12BD6024 8-719-083-82 DIODE UDZS-TE17-12BD6025 8-719-083-82 DIODE UDZS-TE17-12BD6026 8-719-083-82 DIODE UDZS-TE17-12BD6027 8-719-081-98 DIODE MM3Z6V8T1
D6028 8-719-081-98 DIODE MM3Z6V8T1D6029 8-719-081-98 DIODE MM3Z6V8T1D6030 8-719-081-98 DIODE MM3Z6V8T1
F4 A
C6488 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6489 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6490 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6491 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6492 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6493 1-128-992-21 ELECT CHIP 47UF 20% 25VC6494 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6495 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16VC6496 1-128-934-91 CERAMIC CHIP 0.33UF 20% 10VC6497 1-128-934-91 CERAMIC CHIP 0.33UF 20% 10V
C6498 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC6499 1-164-388-91 CERAMIC CHIP 270PF 5.00% 50VC6500 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6501 1-162-927-11 CERAMIC CHIP 100PF 5.00% 50VC6502 1-126-197-11 ELECT CHIP 10UF 20.00% 50V
C6503 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6504 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6505 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6506 1-126-197-11 ELECT CHIP 10UF 20.00% 50VC6507 1-126-197-11 ELECT CHIP 10UF 20.00% 50V
C6508 1-162-970-11 CERAMIC CHIP 0.01UF 10.00% 25VC6509 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6510 1-162-966-11 CERAMIC CHIP 0.0022UF 10.00% 50VC6511 1-162-966-11 CERAMIC CHIP 0.0022UF 10.00% 50VC6512 1-127-573-11 CERAMIC CHIP 1UF 10% 16V
C6513 1-127-573-11 CERAMIC CHIP 1UF 10% 16VC6514 1-162-966-11 CERAMIC CHIP 0.0022UF 10.00% 50VC6515 1-162-966-11 CERAMIC CHIP 0.0022UF 10.00% 50VC6517 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6518 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16V
C6519 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6520 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6521 1-164-505-11 CERAMIC CHIP 2.2UF 16VC6522 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6523 1-164-505-11 CERAMIC CHIP 2.2UF 16V
C6524 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6525 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6526 1-126-204-11 ELECT CHIP 47UF 20.00% 16VC6527 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6528 1-216-864-11 SHORT CHIP 0
C6529 1-117-681-11 ELECT CHIP 100UF 20.00% 16VC6530 1-128-994-21 ELECT CHIP 47UF 20% 10VC6531 1-127-573-11 CERAMIC CHIP 1UF 10% 16VC6532 1-128-994-21 ELECT CHIP 47UF 20% 10VC6533 1-127-573-11 CERAMIC CHIP 1UF 10% 16V
C6538 1-128-992-21 ELECT CHIP 47UF 20% 25VC6540 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6541 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC6544 1-128-934-91 CERAMIC CHIP 0.33UF 20% 10VC6545 1-128-934-91 CERAMIC CHIP 0.33UF 20% 10V
U1
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 55 -
D6031 8-719-081-98 DIODE MM3Z6V8T1D6032 8-719-081-98 DIODE MM3Z6V8T1D6033 8-719-081-98 DIODE MM3Z6V8T1D6034 8-719-081-98 DIODE MM3Z6V8T1D6035 8-719-081-98 DIODE MM3Z6V8T1
D6036 8-719-081-98 DIODE MM3Z6V8T1D6037 8-719-081-98 DIODE MM3Z6V8T1D6038 8-719-081-98 DIODE MM3Z6V8T1D6039 8-719-081-98 DIODE MM3Z6V8T1D6040 8-719-081-98 DIODE MM3Z6V8T1
D6041 8-719-081-98 DIODE MM3Z6V8T1D6042 8-719-404-50 DIODE MA111-TXD6043 8-719-081-98 DIODE MM3Z6V8T1D6044 8-719-081-98 DIODE MM3Z6V8T1D6045 8-719-081-98 DIODE MM3Z6V8T1
D6046 8-719-081-98 DIODE MM3Z6V8T1D6047 8-719-081-98 DIODE MM3Z6V8T1D6048 8-719-081-98 DIODE MM3Z6V8T1D6049 8-719-081-98 DIODE MM3Z6V8T1D6050 8-719-081-97 DIODE MMDL914T1
D6051 8-719-081-97 DIODE MMDL914T1D6052 8-719-081-97 DIODE MMDL914T1D6053 8-719-082-01 DIODE MM3Z12VT1D6054 8-719-083-82 DIODE UDZS-TE17-12BD6055 8-719-083-82 DIODE UDZS-TE17-12B
D6056 8-719-083-82 DIODE UDZS-TE17-12BD6057 8-719-083-82 DIODE UDZS-TE17-12BD6058 8-719-083-82 DIODE UDZS-TE17-12BD6059 8-719-083-82 DIODE UDZS-TE17-12BD6060 8-719-083-82 DIODE UDZS-TE17-12B
D6061 8-719-083-82 DIODE UDZS-TE17-12BD6062 8-719-081-98 DIODE MM3Z6V8T1D6064 8-719-083-82 DIODE UDZS-TE17-12BD6065 8-719-083-82 DIODE UDZS-TE17-12BD6066 8-719-083-82 DIODE UDZS-TE17-12B
D6067 8-719-083-82 DIODE UDZS-TE17-12BD6068 8-719-083-82 DIODE UDZS-TE17-12BD6069 8-719-083-82 DIODE UDZS-TE17-12BD6070 8-719-083-82 DIODE UDZS-TE17-12BD6071 8-719-083-82 DIODE UDZS-TE17-12B
D6072 8-719-083-82 DIODE UDZS-TE17-12BD6073 8-719-083-82 DIODE UDZS-TE17-12BD6075 8-719-081-97 DIODE MMDL914T1D6076 8-719-056-85 DIODE UDZ-TE-17-8.2BD6077 8-719-056-85 DIODE UDZ-TE-17-8.2B
D6080 8-719-404-50 DIODE MA111-TXD6082 8-719-081-98 DIODE MM3Z6V8T1D6084 8-719-080-69 DIODE M1FS4-4063D6086 8-719-404-50 DIODE MA111-TXD6087 8-719-404-50 DIODE MA111-TX
D6093 8-719-312-92 DIODE RK14V1D6094 8-719-312-92 DIODE RK14V1D6095 8-719-081-97 DIODE MMDL914T1D6096 8-719-081-97 DIODE MMDL914T1D6097 8-719-404-50 DIODE MA111-TX
D6301 8-719-081-98 DIODE MM3Z6V8T1D6501 8-719-082-02 DIODE MM3Z3V9T1D6502 8-719-082-02 DIODE MM3Z3V9T1D6503 8-719-080-69 DIODE M1FS4-4063D6601 8-719-080-69 DIODE M1FS4-4063
D6602 8-719-080-69 DIODE M1FS4-4063D6603 8-719-080-69 DIODE M1FS4-4063D6604 8-719-080-69 DIODE M1FS4-4063
< FERRITE BEAD >
FB6002 1-410-397-21 FERRITE 1.1UHFB6003 1-410-397-21 FERRITE 1.1UHFB6004 1-216-295-91 SHORT CHIP 0FB6005 1-216-295-91 SHORT CHIP 0FB6006 1-414-229-11 FERRITE 0UH
FB6007 1-414-813-11 FERRITE 0UHFB6008 1-216-295-91 SHORT CHIP 0FB6009 1-216-864-11 SHORT CHIP 0FB6010 1-216-864-11 SHORT CHIP 0FB6011 1-216-864-11 SHORT CHIP 0
FB6012 1-216-295-91 SHORT CHIP 0FB6013 1-216-295-91 SHORT CHIP 0FB6015 1-216-295-91 SHORT CHIP 0FB6016 1-469-835-21 FERRITE 0UHFB6017 1-216-295-91 SHORT CHIP 0
FB6018 1-216-295-91 SHORT CHIP 0FB6019 1-216-295-91 SHORT CHIP 0FB6020 1-216-295-91 SHORT CHIP 0FB6021 1-216-295-91 SHORT CHIP 0FB6023 1-216-295-91 SHORT CHIP 0
FB6024 1-216-295-91 SHORT CHIP 0FB6029 1-216-295-91 SHORT CHIP 0FB6030 1-414-760-21 FERRITE 0UHFB6032 1-216-295-91 SHORT CHIP 0FB6033 1-469-775-21 FERRITE 0UH
FB6034 1-469-775-21 FERRITE 0UHFB6036 1-469-775-21 FERRITE 0UHFB6037 1-414-760-21 FERRITE 0UH
< IC >
IC6000 8-759-669-75 IC TLC2932IPWRIC6001 8-759-581-11 IC NJM2125F(TE2)IC6002 8-759-595-95 IC SN74LV4040ANSRIC6003 6-704-237-01 IC TDA7490LIC6004 8-752-108-36 IC CXA2171AQ-T6
D2 U1
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 56 -
L6017 1-469-549-21 INDUCTOR 1UHL6018 1-412-058-11 INDUCTOR 10UHL6019 1-469-549-21 INDUCTOR 1UHL6023 1-412-029-11 INDUCTOR 10UHL6025 1-216-864-11 SHORT CHIP 0
L6027 1-469-549-21 INDUCTOR 1UHL6028 1-469-549-21 INDUCTOR 1UHL6034 1-469-549-21 INDUCTOR 1UHL6035 1-469-549-21 INDUCTOR 1UHL6036 1-414-854-41 INDUCTOR 1MH
L6037 1-412-030-11 INDUCTOR 22UHL6038 1-412-030-11 INDUCTOR 22UHL6039 1-216-864-11 SHORT CHIP 0L6040 1-412-030-11 INDUCTOR 22UHL6041 1-216-864-11 SHORT CHIP 0
L6043 1-469-549-21 INDUCTOR 1UHL6044 1-412-030-11 INDUCTOR 22UHL6045 1-469-549-21 INDUCTOR 1UHL6046 1-469-549-21 INDUCTOR 1UHL6047 1-412-058-11 INDUCTOR 10UH
L6050 1-469-549-21 INDUCTOR 1UHL6051 1-469-549-21 INDUCTOR 1UH
< PROTECTOR MODULE >
PS6000 £ 1-576-390-91 IC LINK 2.5A 50VPS6001 £ 1-576-390-91 IC LINK 2.5A 50V
< TRANSISTOR >
Q6001 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q6002 8-729-928-19 TRANSISTOR 2SA1774RQ6003 8-729-927-99 TRANSISTOR 2SC4617RQ6014 8-729-927-99 TRANSISTOR 2SC4617RQ6015 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q6016 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q6017 8-729-010-05 TRANSISTOR MSB709-RT1Q6018 8-729-122-63 TRANSISTOR 2SA1226-E4Q6019 8-729-122-63 TRANSISTOR 2SA1226-E4Q6020 8-729-122-63 TRANSISTOR 2SA1226-E4
Q6021 6-550-832-01 TRANSISTOR SI2301BDS-T1Q6022 8-729-927-99 TRANSISTOR 2SC4617RQ6023 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q6025 8-729-927-99 TRANSISTOR 2SC4617RQ6028 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q6030 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q6032 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q6034 8-729-038-96 TRANSISTOR IMZ1A-T109Q6035 8-729-927-99 TRANSISTOR 2SC4617RQ6036 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q6037 8-729-927-99 TRANSISTOR 2SC4617R
IC6005 8-759-481-08 IC TC7SET02FU(TE85R)IC6006 8-752-089-33 IC CXA2069Q-TLIC6007 6-701-173-01 IC MC74LVXT4053DTR2IC6008 8-759-278-58 IC NJM4558V-TE2IC6010 6-703-850-01 IC TC7SET04FU(TE85R1)
IC6012 6-704-809-01 IC AK7716VTIC6013 6-704-950-01 IC K6X1008C2D-BF70TIC6014 8-759-592-10 IC TC7WH00FU(TE12R)IC6015 8-759-591-61 IC TC7WHU04FU(TE12R)IC6016 6-704-967-01 IC PQ20RX11J00H
IC6017 8-759-595-95 IC SN74LV4040ANSRIC6018 8-759-592-47 IC TC7SZ08FU(TE85R)IC6019 8-759-829-76 IC IC TAR5S30(TE85R)IC6026 6-700-988-11 IC NJM2374AM-TE2IC6027 6-701-031-11 IC MSP3411G-QA-B11
IC6028 8-759-198-31 IC UPC1093J-1-TIC6030 8-759-287-76 IC NJM2123M (T1)IC6031 8-752-072-94 IC CXA1875AM-T4IC6032 8-752-072-94 IC CXA1875AM-T4IC6101 8-759-533-85 IC L88M05T-FA-TL
IC6102 8-759-460-79 IC BA09FP-E2IC6700 8-759-278-58 IC NJM4558V-TE2IC6701 8-759-278-58 IC NJM4558V-TE2IC6800 8-759-576-76 IC TDA2822D013TR
< SOCKET >
J6000 1-695-549-11 SOCKET, PIN 21PJ6001 1-695-549-11 SOCKET, PIN 21PJ6003 1-695-549-11 SOCKET, PIN 21PJ6004 1-817-098-11 PIN JACK BLOCK 3PJ6005 1-565-838-11 JACK BLOCK, PIN 2P
J6006 1-816-393-11 JACK BLOCK, PIN 3PJ6501 1-691-293-21 JACK
< COIL >
L6001 1-469-549-21 INDUCTOR 1UHL6002 1-469-549-21 INDUCTOR 1UHL6003 1-469-549-21 INDUCTOR 1UHL6004 1-469-549-21 INDUCTOR 1UHL6005 1-412-990-41 INDUCTOR 8.2UH
L6006 1-412-058-11 INDUCTOR 10UHL6007 1-412-058-11 INDUCTOR 10UHL6008 1-412-026-11 INDUCTOR 1UHL6009 1-412-030-11 INDUCTOR 22UHL6010 1-412-030-11 INDUCTOR 22UH
L6011 1-416-966-11 INDUCTOR 30UHL6012 1-416-966-11 INDUCTOR 30UHL6014 1-412-058-11 INDUCTOR 10UHL6015 1-469-549-21 INDUCTOR 1UHL6016 1-469-549-21 INDUCTOR 1UH
U1
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 57 -
JR6050 1-216-864-11 SHORT CHIP 0JR6051 1-216-864-11 SHORT CHIP 0JR6052 1-216-864-11 SHORT CHIP 0JR6053 1-216-864-11 SHORT CHIP 0JR6054 1-216-864-11 SHORT CHIP 0
JR6056 1-216-295-91 SHORT CHIP 0JR6057 1-216-295-91 SHORT CHIP 0JR6058 1-216-295-91 SHORT CHIP 0JR6059 1-216-295-91 SHORT CHIP 0JR6060 1-216-295-91 SHORT CHIP 0
JR6061 1-216-295-91 SHORT CHIP 0JR6062 1-216-295-91 SHORT CHIP 0JR6063 1-216-295-91 SHORT CHIP 0JR6064 1-216-295-91 SHORT CHIP 0JR6065 1-216-295-91 SHORT CHIP 0
JR6101 1-216-864-11 SHORT CHIP 0JR6607 1-216-295-91 SHORT CHIP 0JR6608 1-216-295-91 SHORT CHIP 0JR6609 1-216-295-91 SHORT CHIP 0
R6001 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6002 1-216-069-00 RES-CHIP 6.8K 5% 1/10WR6003 1-216-025-11 RES-CHIP 100 5% 1/10WR6004 1-216-025-11 RES-CHIP 100 5% 1/10WR6005 1-216-815-11 METAL CHIP 330 5% 1/10W
R6007 1-216-833-11 METAL CHIP 10K 5% 1/10WR6008 1-216-835-11 METAL CHIP 15K 5% 1/10WR6009 1-216-828-11 METAL CHIP 3.9K 5% 1/10WR6011 1-216-295-91 SHORT CHIP 0R6013 1-218-684-11 METAL CHIP 470 0.5% 1/10W
R6014 1-414-760-21 FERRITE 0UHR6016 1-216-821-11 METAL CHIP 1K 5% 1/10WR6017 1-216-835-11 METAL CHIP 15K 5% 1/10WR6018 1-218-684-11 METAL CHIP 470 0.5% 1/10WR6020 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6023 1-216-805-11 METAL CHIP 47 5% 1/10WR6024 1-216-833-11 METAL CHIP 10K 5% 1/10WR6027 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6028 1-218-857-11 METAL CHIP 2.7K 0.5% 1/10WR6029 1-218-866-11 METAL CHIP 6.2K 0.5% 1/10W
R6031 1-216-117-00 RES-CHIP 680K 5% 1/10WR6033 1-216-835-11 METAL CHIP 15K 5% 1/10WR6034 1-216-117-00 RES-CHIP 680K 5% 1/10WR6035 1-216-821-11 METAL CHIP 1K 5% 1/10WR6037 1-216-295-91 SHORT CHIP 0
R6038 1-216-803-11 METAL CHIP 33 5% 1/10WR6039 1-216-803-11 METAL CHIP 33 5% 1/10WR6040 1-216-841-11 METAL CHIP 47K 5% 1/10WR6041 1-216-841-11 METAL CHIP 47K 5% 1/10WR6042 1-216-864-11 SHORT CHIP 0
Q6038 8-729-928-19 TRANSISTOR 2SA1774RQ6039 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16Q6040 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16Q6041 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16Q6042 8-729-928-19 TRANSISTOR 2SA1774R
Q6043 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q6064 8-729-928-19 TRANSISTOR 2SA1774RQ6067 8-729-928-19 TRANSISTOR 2SA1774RQ6068 8-729-927-99 TRANSISTOR 2SC4617RQ6069 8-729-928-19 TRANSISTOR 2SA1774R
Q6070 8-729-928-19 TRANSISTOR 2SA1774RQ6071 8-729-928-81 TRANSISTOR DTC144EEQ6072 8-729-026-49 TRANSISTOR 2SA1037AK-T146-RQ6073 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q6074 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q6075 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16Q6076 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16Q6077 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16Q6078 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16Q6079 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16
Q6080 8-729-122-63 TRANSISTOR 2SA1226-E4Q6081 8-729-122-63 TRANSISTOR 2SA1226-E4
< RESISTOR >
JR6001 1-216-798-11 METAL CHIP 12 5% 1/10WJR6002 1-216-798-11 METAL CHIP 12 5% 1/10WJR6003 1-216-798-11 METAL CHIP 12 5% 1/10WJR6005 1-216-295-91 SHORT CHIP 0JR6006 1-216-295-91 SHORT CHIP 0
JR6025 1-216-864-11 SHORT CHIP 0JR6030 1-216-864-11 SHORT CHIP 0JR6031 1-216-864-11 SHORT CHIP 0JR6032 1-216-864-11 SHORT CHIP 0JR6033 1-216-864-11 SHORT CHIP 0
JR6034 1-216-864-11 SHORT CHIP 0JR6035 1-216-864-11 SHORT CHIP 0JR6036 1-216-864-11 SHORT CHIP 0JR6037 1-216-864-11 SHORT CHIP 0JR6038 1-216-864-11 SHORT CHIP 0
JR6040 1-216-864-11 SHORT CHIP 0JR6041 1-216-864-11 SHORT CHIP 0JR6042 1-216-864-11 SHORT CHIP 0JR6043 1-216-864-11 SHORT CHIP 0JR6044 1-216-864-11 SHORT CHIP 0
JR6045 1-216-864-11 SHORT CHIP 0JR6046 1-216-864-11 SHORT CHIP 0JR6047 1-216-864-11 SHORT CHIP 0JR6048 1-216-864-11 SHORT CHIP 0JR6049 1-216-864-11 SHORT CHIP 0
U1
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 58 -
R6043 1-216-837-11 METAL CHIP 22K 5% 1/10WR6044 1-216-833-11 METAL CHIP 10K 5% 1/10WR6045 1-216-839-11 METAL CHIP 33K 5% 1/10WR6046 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6047 1-216-864-11 SHORT CHIP 0
R6049 1-216-864-11 SHORT CHIP 0R6050 1-216-821-11 METAL CHIP 1K 5% 1/10WR6051 1-216-821-11 METAL CHIP 1K 5% 1/10WR6052 1-216-809-11 METAL CHIP 100 5% 1/10WR6053 1-216-809-11 METAL CHIP 100 5% 1/10W
R6054 1-216-803-11 METAL CHIP 33 5% 1/10WR6086 1-216-821-11 METAL CHIP 1K 5% 1/10WR6087 1-216-821-11 METAL CHIP 1K 5% 1/10WR6090 1-216-833-11 METAL CHIP 10K 5% 1/10WR6091 1-216-843-11 METAL CHIP 68K 5% 1/10W
R6094 1-216-848-11 METAL CHIP 180K 5% 1/10WR6095 1-216-830-11 METAL CHIP 5.6K 5% 1/10WR6097 1-216-813-11 METAL CHIP 220 5% 1/10WR6098 1-216-813-11 METAL CHIP 220 5% 1/10WR6099 1-216-841-11 METAL CHIP 47K 5% 1/10W
R6101 1-216-813-11 METAL CHIP 220 5% 1/10WR6102 1-216-813-11 METAL CHIP 220 5% 1/10WR6103 1-216-830-11 METAL CHIP 5.6K 5% 1/10WR6104 1-216-837-11 METAL CHIP 22K 5% 1/10WR6105 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R6106 1-216-837-11 METAL CHIP 22K 5% 1/10WR6107 1-218-871-11 METAL CHIP 10K 0.5% 1/10WR6109 1-216-809-11 METAL CHIP 100 5% 1/10WR6110 1-216-835-11 METAL CHIP 15K 5% 1/10WR6111 1-216-817-11 METAL CHIP 470 5% 1/10W
R6112 1-216-821-11 METAL CHIP 1K 5% 1/10WR6114 1-216-843-11 METAL CHIP 68K 5% 1/10WR6115 1-218-879-11 METAL CHIP 22K 0.5% 1/10WR6117 1-216-821-11 METAL CHIP 1K 5% 1/10WR6118 1-216-841-11 METAL CHIP 47K 5% 1/10W
R6119 1-218-879-11 METAL CHIP 22K 0.5% 1/10WR6120 1-216-836-11 METAL CHIP 18K 5% 1/10WR6121 1-216-833-11 METAL CHIP 10K 5% 1/10WR6122 1-216-843-11 METAL CHIP 68K 5% 1/10WR6123 1-216-846-11 METAL CHIP 120K 5% 1/10W
R6124 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6125 1-216-817-11 METAL CHIP 470 5% 1/10WR6126 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6127 1-216-830-11 METAL CHIP 5.6K 5% 1/10WR6128 1-216-841-11 METAL CHIP 47K 5% 1/10W
R6129 1-216-813-11 METAL CHIP 220 5% 1/10WR6130 1-216-813-11 METAL CHIP 220 5% 1/10WR6131 1-216-813-11 METAL CHIP 220 5% 1/10WR6132 1-216-813-11 METAL CHIP 220 5% 1/10WR6133 1-216-795-11 METAL CHIP 6.8 5% 1/10W
R6134 1-216-833-11 METAL CHIP 10K 5% 1/10WR6135 1-216-833-11 METAL CHIP 10K 5% 1/10WR6136 1-216-805-11 METAL CHIP 47 5% 1/10WR6137 1-216-805-11 METAL CHIP 47 5% 1/10WR6138 1-216-809-11 METAL CHIP 100 5% 1/10W
R6139 1-216-809-11 METAL CHIP 100 5% 1/10WR6140 1-216-805-11 METAL CHIP 47 5% 1/10WR6141 1-216-809-11 METAL CHIP 100 5% 1/10WR6142 1-216-809-11 METAL CHIP 100 5% 1/10WR6143 1-216-809-11 METAL CHIP 100 5% 1/10W
R6144 1-216-809-11 METAL CHIP 100 5% 1/10WR6145 1-216-809-11 METAL CHIP 100 5% 1/10WR6146 1-216-809-11 METAL CHIP 100 5% 1/10WR6147 1-216-809-11 METAL CHIP 100 5% 1/10WR6148 1-216-809-11 METAL CHIP 100 5% 1/10W
R6149 1-216-809-11 METAL CHIP 100 5% 1/10WR6150 1-216-864-11 SHORT CHIP 0R6151 1-216-809-11 METAL CHIP 100 5% 1/10WR6152 1-216-809-11 METAL CHIP 100 5% 1/10WR6155 1-216-809-11 METAL CHIP 100 5% 1/10W
R6156 1-216-809-11 METAL CHIP 100 5% 1/10WR6157 1-216-809-11 METAL CHIP 100 5% 1/10WR6158 1-216-809-11 METAL CHIP 100 5% 1/10WR6159 1-216-849-11 METAL CHIP 220K 5% 1/10WR6160 1-216-809-11 METAL CHIP 100 5% 1/10W
R6161 1-216-809-11 METAL CHIP 100 5% 1/10WR6162 1-216-805-11 METAL CHIP 47 5% 1/10WR6163 1-216-809-11 METAL CHIP 100 5% 1/10WR6164 1-216-805-11 METAL CHIP 47 5% 1/10WR6165 1-216-805-11 METAL CHIP 47 5% 1/10W
R6166 1-216-813-11 METAL CHIP 220 5% 1/10WR6167 1-216-813-11 METAL CHIP 220 5% 1/10WR6168 1-216-813-11 METAL CHIP 220 5% 1/10WR6169 1-208-707-11 METAL CHIP 10K 0.5% 1/16WR6170 1-216-805-11 METAL CHIP 47 5% 1/10W
R6171 1-216-805-11 METAL CHIP 47 5% 1/10WR6172 1-216-821-11 METAL CHIP 1K 5% 1/10WR6173 1-216-821-11 METAL CHIP 1K 5% 1/10WR6174 1-216-809-11 METAL CHIP 100 5% 1/10WR6175 1-216-809-11 METAL CHIP 100 5% 1/10W
R6176 1-216-809-11 METAL CHIP 100 5% 1/10WR6177 1-216-809-11 METAL CHIP 100 5% 1/10WR6178 1-216-809-11 METAL CHIP 100 5% 1/10WR6179 1-216-809-11 METAL CHIP 100 5% 1/10WR6180 1-216-809-11 METAL CHIP 100 5% 1/10W
R6181 1-216-809-11 METAL CHIP 100 5% 1/10WR6182 1-216-809-11 METAL CHIP 100 5% 1/10WR6183 1-216-809-11 METAL CHIP 100 5% 1/10WR6184 1-216-809-11 METAL CHIP 100 5% 1/10WR6185 1-216-809-11 METAL CHIP 100 5% 1/10W
U1
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 59 -
U1
R6186 1-216-809-11 METAL CHIP 100 5% 1/10WR6187 1-216-809-11 METAL CHIP 100 5% 1/10WR6188 1-216-809-11 METAL CHIP 100 5% 1/10WR6189 1-216-809-11 METAL CHIP 100 5% 1/10WR6190 1-216-809-11 METAL CHIP 100 5% 1/10W
R6191 1-216-864-11 SHORT CHIP 0R6192 1-216-809-11 METAL CHIP 100 5% 1/10WR6194 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6195 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6196 1-216-809-11 METAL CHIP 100 5% 1/10W
R6198 1-216-809-11 METAL CHIP 100 5% 1/10WR6199 1-216-809-11 METAL CHIP 100 5% 1/10WR6201 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6202 1-216-821-11 METAL CHIP 1K 5% 1/10WR6204 1-216-813-11 METAL CHIP 220 5% 1/10W
R6207 1-216-864-11 SHORT CHIP 0R6209 1-216-833-11 METAL CHIP 10K 5% 1/10WR6211 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6212 1-216-833-11 METAL CHIP 10K 5% 1/10WR6214 1-216-809-11 METAL CHIP 100 5% 1/10W
R6215 1-216-821-11 METAL CHIP 1K 5% 1/10WR6219 1-216-821-11 METAL CHIP 1K 5% 1/10WR6222 1-216-821-11 METAL CHIP 1K 5% 1/10WR6224 1-216-821-11 METAL CHIP 1K 5% 1/10WR6225 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6226 1-216-821-11 METAL CHIP 1K 5% 1/10WR6227 1-216-813-11 METAL CHIP 220 5% 1/10WR6228 1-216-821-11 METAL CHIP 1K 5% 1/10WR6229 1-216-833-11 METAL CHIP 10K 5% 1/10WR6230 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6231 1-216-821-11 METAL CHIP 1K 5% 1/10WR6232 1-216-833-11 METAL CHIP 10K 5% 1/10WR6233 1-216-864-11 SHORT CHIP 0R6234 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6235 1-216-864-11 SHORT CHIP 0
R6236 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6237 1-216-864-11 SHORT CHIP 0R6240 1-216-295-91 SHORT CHIP 0R6241 1-216-295-91 SHORT CHIP 0R6242 1-216-864-11 SHORT CHIP 0
R6243 1-216-864-11 SHORT CHIP 0R6244 1-216-864-11 SHORT CHIP 0R6245 1-216-864-11 SHORT CHIP 0R6246 1-216-864-11 SHORT CHIP 0R6250 1-216-839-11 METAL CHIP 33K 5% 1/10W
R6251 1-216-809-11 METAL CHIP 100 5% 1/10WR6254 1-216-813-11 METAL CHIP 220 5% 1/10WR6256 1-216-813-11 METAL CHIP 220 5% 1/10WR6263 1-216-864-11 SHORT CHIP 0R6266 1-216-864-11 SHORT CHIP 0
R6296 1-216-809-11 METAL CHIP 100 5% 1/10WR6297 1-216-809-11 METAL CHIP 100 5% 1/10WR6298 1-216-809-11 METAL CHIP 100 5% 1/10WR6299 1-216-864-11 SHORT CHIP 0R6300 1-216-864-11 SHORT CHIP 0
R6301 1-218-990-11 SHORT CHIP 0R6302 1-216-864-11 SHORT CHIP 0R6303 1-216-864-11 SHORT CHIP 0R6304 1-216-864-11 SHORT CHIP 0R6305 1-216-809-11 METAL CHIP 100 5% 1/10W
R6306 1-216-809-11 METAL CHIP 100 5% 1/10WR6308 1-216-809-11 METAL CHIP 100 5% 1/10WR6310 1-216-821-11 METAL CHIP 1K 5% 1/10WR6312 1-216-864-11 SHORT CHIP 0R6313 1-218-941-81 RES-CHIP 100 5% 1/16W
R6314 1-216-809-11 METAL CHIP 100 5% 1/10WR6319 1-218-990-11 SHORT CHIP 0R6320 1-218-953-11 RES-CHIP 1K 5% 1/16WR6321 1-216-864-11 SHORT CHIP 0R6322 1-216-864-11 SHORT CHIP 0
R6323 1-216-022-00 RES-CHIP 75 5% 1/10WR6324 1-216-022-00 RES-CHIP 75 5% 1/10WR6325 1-216-022-00 RES-CHIP 75 5% 1/10WR6326 1-216-022-00 RES-CHIP 75 5% 1/10WR6327 1-216-022-00 RES-CHIP 75 5% 1/10W
R6328 1-216-022-00 RES-CHIP 75 5% 1/10WR6329 1-216-022-00 RES-CHIP 75 5% 1/10WR6330 1-216-821-11 METAL CHIP 1K 5% 1/10WR6331 1-216-039-00 RES-CHIP 390 5% 1/10WR6332 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6333 1-216-039-00 RES-CHIP 390 5% 1/10WR6334 1-216-821-11 METAL CHIP 1K 5% 1/10WR6335 1-216-039-00 RES-CHIP 390 5% 1/10WR6336 1-216-821-11 METAL CHIP 1K 5% 1/10WR6337 1-216-039-00 RES-CHIP 390 5% 1/10W
R6338 1-216-022-00 RES-CHIP 75 5% 1/10WR6339 1-216-837-11 METAL CHIP 22K 5% 1/10WR6340 1-216-837-11 METAL CHIP 22K 5% 1/10WR6341 1-216-821-11 METAL CHIP 1K 5% 1/10WR6342 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6343 1-216-022-00 RES-CHIP 75 5% 1/10WR6344 1-216-022-00 RES-CHIP 75 5% 1/10WR6345 1-216-834-11 METAL CHIP 12K 5% 1/10WR6346 1-216-853-11 METAL CHIP 470K 5% 1/10WR6347 1-216-841-11 METAL CHIP 47K 5% 1/10W
R6348 1-216-853-11 METAL CHIP 470K 5% 1/10WR6349 1-216-841-11 METAL CHIP 47K 5% 1/10WR6350 1-216-834-11 METAL CHIP 12K 5% 1/10WR6351 1-216-853-11 METAL CHIP 470K 5% 1/10WR6352 1-216-841-11 METAL CHIP 47K 5% 1/10W
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 60 -
VM
R6404 1-216-022-00 RES-CHIP 75 5% 1/10WR6405 1-216-022-00 RES-CHIP 75 5% 1/10WR6406 1-216-821-11 METAL CHIP 1K 5% 1/10WR6407 1-216-821-11 METAL CHIP 1K 5% 1/10WR6408 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6409 1-216-821-11 METAL CHIP 1K 5% 1/10WR6410 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6501 1-249-393-11 CARBON 10 5% 1/4WR6502 1-216-025-11 RES-CHIP 100 5% 1/10WR6503 1-216-797-11 METAL CHIP 10 5% 1/10W
R6504 1-216-841-11 METAL CHIP 47K 5% 1/10WR6505 1-216-841-11 METAL CHIP 47K 5% 1/10WR6506 1-216-841-11 METAL CHIP 47K 5% 1/10WR6507 1-216-841-11 METAL CHIP 47K 5% 1/10WR6508 1-216-841-11 METAL CHIP 47K 5% 1/10W
R6509 1-216-841-11 METAL CHIP 47K 5% 1/10WR6510 1-216-841-11 METAL CHIP 47K 5% 1/10WR6511 1-216-841-11 METAL CHIP 47K 5% 1/10WR6570 1-249-387-11 CARBON 3.3 5% 1/4WR6571 1-216-812-11 METAL CHIP 180 5% 1/10W
R6576 1-216-809-11 METAL CHIP 100 5% 1/10WR6577 1-216-809-11 METAL CHIP 100 5% 1/10WR6578 1-218-697-11 METAL CHIP 1.6K 0.5% 1/10WR6579 1-218-730-11 METAL CHIP 39K 0.5% 1/10WR6583 1-216-805-11 METAL CHIP 47 5% 1/10W
R6585 1-216-821-11 METAL CHIP 1K 5% 1/10WR6588 1-216-821-11 METAL CHIP 1K 5% 1/10WR6590 1-216-809-11 METAL CHIP 100 5% 1/10WR6591 1-216-845-11 METAL CHIP 100K 5% 1/10WR6592 1-216-295-91 SHORT CHIP 0
R6593 1-216-821-11 METAL CHIP 1K 5% 1/10WR6594 1-216-809-11 METAL CHIP 100 5% 1/10WR6595 1-216-809-11 METAL CHIP 100 5% 1/10WR6596 1-216-033-00 RES-CHIP 220 5% 1/10WR6597 1-216-295-91 SHORT CHIP 0
R6598 1-216-295-91 SHORT CHIP 0R6599 1-216-809-11 METAL CHIP 100 5% 1/10WR6600 1-216-033-00 RES-CHIP 220 5% 1/10WR6601 1-216-033-00 RES-CHIP 220 5% 1/10WR6602 1-216-295-91 SHORT CHIP 0
R6603 1-216-295-91 SHORT CHIP 0R6604 1-216-001-00 RES-CHIP 10 5% 1/10WR6605 1-216-035-00 RES-CHIP 270 5% 1/10WR6607 1-216-817-11 METAL CHIP 470 5% 1/10WR6609 1-216-853-11 METAL CHIP 470K 5% 1/10W
R6610 1-216-841-11 METAL CHIP 47K 5% 1/10WR6613 1-216-841-11 METAL CHIP 47K 5% 1/10WR6616 1-216-839-11 METAL CHIP 33K 5% 1/10WR6617 1-216-839-11 METAL CHIP 33K 5% 1/10WR6620 1-216-023-00 RES-CHIP 82 5% 1/10W
R6353 1-216-853-11 METAL CHIP 470K 5% 1/10WR6354 1-216-841-11 METAL CHIP 47K 5% 1/10WR6355 1-216-809-11 METAL CHIP 100 5% 1/10WR6356 1-216-853-11 METAL CHIP 470K 5% 1/10WR6357 1-216-853-11 METAL CHIP 470K 5% 1/10W
R6358 1-216-809-11 METAL CHIP 100 5% 1/10WR6359 1-216-022-00 RES-CHIP 75 5% 1/10WR6360 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6361 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6362 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R6363 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6364 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6365 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6366 1-216-834-11 METAL CHIP 12K 5% 1/10WR6368 1-218-951-11 RES-CHIP 680 5% 1/16W
R6369 1-218-951-11 RES-CHIP 680 5% 1/16WR6370 1-216-864-11 SHORT CHIP 0R6371 1-216-864-11 SHORT CHIP 0R6372 1-216-864-11 SHORT CHIP 0R6373 1-208-712-11 METAL CHIP 16K 0.5% 1/16W
R6374 1-216-809-11 METAL CHIP 100 5% 1/10WR6375 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6376 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6377 1-216-057-00 RES-CHIP 2.2K 5% 1/10WR6378 1-216-057-00 RES-CHIP 2.2K 5% 1/10W
R6379 1-216-022-00 RES-CHIP 75 5% 1/10WR6380 1-216-834-11 METAL CHIP 12K 5% 1/10WR6381 1-216-853-11 METAL CHIP 470K 5% 1/10WR6382 1-216-841-11 METAL CHIP 47K 5% 1/10WR6383 1-216-853-11 METAL CHIP 470K 5% 1/10W
R6384 1-216-841-11 METAL CHIP 47K 5% 1/10WR6385 1-216-821-11 METAL CHIP 1K 5% 1/10WR6386 1-216-821-11 METAL CHIP 1K 5% 1/10WR6387 1-216-837-11 METAL CHIP 22K 5% 1/10WR6388 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6389 1-216-853-11 METAL CHIP 470K 5% 1/10WR6390 1-216-853-11 METAL CHIP 470K 5% 1/10WR6391 1-216-022-00 RES-CHIP 75 5% 1/10WR6392 1-216-821-11 METAL CHIP 1K 5% 1/10WR6393 1-216-039-00 RES-CHIP 390 5% 1/10W
R6394 1-216-821-11 METAL CHIP 1K 5% 1/10WR6395 1-216-039-00 RES-CHIP 390 5% 1/10WR6396 1-216-022-00 RES-CHIP 75 5% 1/10WR6397 1-216-853-11 METAL CHIP 470K 5% 1/10WR6398 1-216-853-11 METAL CHIP 470K 5% 1/10W
R6399 1-216-022-00 RES-CHIP 75 5% 1/10WR6400 1-216-022-00 RES-CHIP 75 5% 1/10WR6401 1-216-022-00 RES-CHIP 75 5% 1/10WR6402 1-216-853-11 METAL CHIP 470K 5% 1/10WR6403 1-216-022-00 RES-CHIP 75 5% 1/10W
U1F5
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 61 -
R6621 1-216-023-00 RES-CHIP 82 5% 1/10WR6623 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6624 1-216-833-11 METAL CHIP 10K 5% 1/10WR6625 1-216-821-11 METAL CHIP 1K 5% 1/10WR6627 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R6629 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6630 1-216-821-11 METAL CHIP 1K 5% 1/10WR6632 1-216-864-11 SHORT CHIP 0R6633 1-216-821-11 METAL CHIP 1K 5% 1/10WR6634 1-216-809-11 METAL CHIP 100 5% 1/10W
R6636 1-216-864-11 SHORT CHIP 0R6637 1-216-864-11 SHORT CHIP 0R6638 1-216-835-11 METAL CHIP 15K 5% 1/10WR6640 1-216-835-11 METAL CHIP 15K 5% 1/10WR6641 1-216-829-11 METAL CHIP 4.7K 5% 1/10W
R6642 1-216-835-11 METAL CHIP 15K 5% 1/10WR6643 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6644 1-216-864-11 SHORT CHIP 0R6646 1-216-864-11 SHORT CHIP 0R6648 1-216-061-91 RES-CHIP 3.3K 5% 1/10W
R6649 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6650 1-216-061-91 RES-CHIP 3.3K 5% 1/10WR6652 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6653 1-216-864-11 SHORT CHIP 0R6654 1-216-864-11 SHORT CHIP 0
R6658 1-216-809-11 METAL CHIP 100 5% 1/10WR6659 1-216-809-11 METAL CHIP 100 5% 1/10WR6660 1-216-809-11 METAL CHIP 100 5% 1/10WR6661 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6662 1-216-809-11 METAL CHIP 100 5% 1/10W
R6663 1-216-809-11 METAL CHIP 100 5% 1/10WR6664 1-216-809-11 METAL CHIP 100 5% 1/10WR6665 1-216-809-11 METAL CHIP 100 5% 1/10WR6666 1-216-809-11 METAL CHIP 100 5% 1/10WR6667 1-216-809-11 METAL CHIP 100 5% 1/10W
R6668 1-216-809-11 METAL CHIP 100 5% 1/10WR6669 1-216-809-11 METAL CHIP 100 5% 1/10WR6670 1-216-809-11 METAL CHIP 100 5% 1/10WR6671 1-216-809-11 METAL CHIP 100 5% 1/10WR6672 1-216-809-11 METAL CHIP 100 5% 1/10W
R6673 1-216-809-11 METAL CHIP 100 5% 1/10WR6674 1-216-809-11 METAL CHIP 100 5% 1/10WR6675 1-216-809-11 METAL CHIP 100 5% 1/10WR6676 1-216-809-11 METAL CHIP 100 5% 1/10WR6677 1-216-809-11 METAL CHIP 100 5% 1/10W
R6678 1-216-833-11 METAL CHIP 10K 5% 1/10WR6679 1-216-829-11 METAL CHIP 4.7K 5% 1/10WR6680 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6681 1-216-821-11 METAL CHIP 1K 5% 1/10WR6682 1-216-821-11 METAL CHIP 1K 5% 1/10W
U1
R6683 1-216-821-11 METAL CHIP 1K 5% 1/10WR6684 1-216-864-11 SHORT CHIP 0R6685 1-216-864-11 SHORT CHIP 0R6686 1-164-004-11 CERAMIC CHIP 0.1UF 10% 25VR6688 1-216-821-11 METAL CHIP 1K 5% 1/10W
R6689 1-216-864-11 SHORT CHIP 0R6690 1-216-833-11 METAL CHIP 10K 5% 1/10WR6691 1-216-809-11 METAL CHIP 100 5% 1/10WR6692 1-414-760-21 FERRITE 0UHR6694 1-216-864-11 SHORT CHIP 0
R6695 1-216-864-11 SHORT CHIP 0R6696 1-216-864-11 SHORT CHIP 0R6697 1-216-864-11 SHORT CHIP 0R6698 1-216-864-11 SHORT CHIP 0R6699 1-216-864-11 SHORT CHIP 0
R6700 1-216-864-11 SHORT CHIP 0R6701 1-216-864-11 SHORT CHIP 0R6702 1-216-864-11 SHORT CHIP 0R6703 1-216-864-11 SHORT CHIP 0R6704 1-218-961-11 RES-CHIP 4.7K 5% 1/16W
R6705 1-216-841-11 METAL CHIP 47K 5% 1/10WR6706 1-218-961-11 RES-CHIP 4.7K 5% 1/16WR6707 1-218-961-11 RES-CHIP 4.7K 5% 1/16WR6708 1-216-841-11 METAL CHIP 47K 5% 1/10WR6709 1-216-841-11 METAL CHIP 47K 5% 1/10W
R6710 1-218-961-11 RES-CHIP 4.7K 5% 1/16WR6711 1-216-841-11 METAL CHIP 47K 5% 1/10WR6712 1-216-841-11 METAL CHIP 47K 5% 1/10WR6713 1-218-961-11 RES-CHIP 4.7K 5% 1/16WR6714 1-218-962-11 RES-CHIP 5.6K 5% 1/16W
R6715 1-218-961-11 RES-CHIP 4.7K 5% 1/16WR6716 1-216-841-11 METAL CHIP 47K 5% 1/10WR6717 1-216-841-11 METAL CHIP 47K 5% 1/10WR6718 1-218-962-11 RES-CHIP 5.6K 5% 1/16WR6719 1-216-841-11 METAL CHIP 47K 5% 1/10W
R6800 1-216-805-11 METAL CHIP 47 5% 1/10WR6801 1-216-805-11 METAL CHIP 47 5% 1/10WR6802 1-216-837-11 METAL CHIP 22K 5% 1/10WR6803 1-216-837-11 METAL CHIP 22K 5% 1/10WR6804 1-216-825-11 METAL CHIP 2.2K 5% 1/10W
R6805 1-216-825-11 METAL CHIP 2.2K 5% 1/10WR6806 1-249-389-11 CARBON 4.7 5% 1/4WR6807 1-249-389-11 CARBON 4.7 5% 1/4WR6808 1-216-809-11 METAL CHIP 100 5% 1/10WR6809 1-216-813-11 METAL CHIP 220 5% 1/10W
R6810 1-216-809-11 METAL CHIP 100 5% 1/10WR6811 1-216-813-11 METAL CHIP 220 5% 1/10WR6812 1-216-809-11 METAL CHIP 100 5% 1/10WR6813 1-216-809-11 METAL CHIP 100 5% 1/10W
H5 D2
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 62 -
< RESISTOR CHIP >
RB6009 1-239-711-91 NETWORK RESISTOR (CHIP) 0RB6010 1-239-711-91 NETWORK RESISTOR (CHIP) 0RB6011 1-239-711-91 NETWORK RESISTOR (CHIP) 0RB6012 1-239-711-91 NETWORK RESISTOR (CHIP) 0RB6013 1-239-711-91 NETWORK RESISTOR (CHIP) 0
RB6014 1-239-711-91 NETWORK RESISTOR (CHIP) 0RB6015 1-239-412-11 NETWORK RESISTOR (CHIP) 100RB6016 1-239-412-11 NETWORK RESISTOR (CHIP) 100
< SWITCH >
S6201 1-572-921-11 SWITCH, KEY BOARD
< TUNER >
TU6000 8-598-535-20 FRONTEND BTF-EF411
< VARISTOR >
VD6000 1-803-974-21 VARISTOR, CHIP (1608)VD6001 1-803-974-21 VARISTOR, CHIP (1608)VD6002 1-803-974-21 VARISTOR, CHIP (1608)
< CRYSTAL >
X6003 1-781-922-21 VIBRATOR, CERAMICX6007 1-813-283-21 VIBRATOR, CRYSTAL
* A-1410-934-A H3 Board Complete
4-091-676-01 HOLDER (A), LED
< CAPACITOR >
C9701 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3VC9702 1-164-156-11 CERAMIC CHIP 0.1UF 25VC9703 1-164-230-11 CERAMIC CHIP 220PF 5.00% 50VC9704 1-127-715-91 CERAMIC CHIP 0.22UF 10% 16VC9705 1-164-156-11 CERAMIC CHIP 0.1UF 25V
C9706 1-164-156-11 CERAMIC CHIP 0.1UF 25VC9707 1-164-156-11 CERAMIC CHIP 0.1UF 25VC9708 1-164-156-11 CERAMIC CHIP 0.1UF 25VC9709 1-164-156-11 CERAMIC CHIP 0.1UF 25V
< CONNECTOR >
CN9701 * 1-764-094-21 PIN, CONNECTOR (PC BOARD) 9P
< DIODE >
D9701 6-500-487-01 DIODE SMLU12D16WD9702 8-719-081-23 DIODE L-53SRD-HD9703 8-719-081-23 DIODE L-53SRD-HD9704 6-500-425-01 DIODE SELU1E50CMD9705 8-719-421-59 DIODE MA3130WA-TX
< IC >
IC9701 6-600-117-01 IC GP1UM27SRKIC9702 8-752-072-94 IC CXA1875AM-T4
< TRANSISTOR >
Q9700 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q9701 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q9702 8-729-120-28 TRANSISTOR 2SC1623-L5L6Q9703 8-729-216-22 TRANSISTOR 2SA1162-GQ9704 8-729-120-28 TRANSISTOR 2SC1623-L5L6
Q9705 8-729-928-81 TRANSISTOR DTC144EE
< RESISTOR >
R9700 1-216-809-11 METAL CHIP 100 5% 1/10WR9701 1-216-805-11 METAL CHIP 47 5% 1/10WR9702 1-216-809-11 METAL CHIP 100 5% 1/10WR9703 1-216-809-11 METAL CHIP 100 5% 1/10WR9704 1-216-809-11 METAL CHIP 100 5% 1/10W
R9705 1-216-833-11 METAL CHIP 10K 5% 1/10WR9706 1-216-833-11 METAL CHIP 10K 5% 1/10WR9707 1-216-833-11 METAL CHIP 10K 5% 1/10WR9708 1-216-812-11 METAL CHIP 180 5% 1/10WR9709 1-216-833-11 METAL CHIP 10K 5% 1/10W
R9710 1-216-833-11 METAL CHIP 10K 5% 1/10WR9711 1-216-817-11 METAL CHIP 470 5% 1/10WR9712 1-216-809-11 METAL CHIP 100 5% 1/10WR9713 1-216-809-11 METAL CHIP 100 5% 1/10WR9714 1-216-809-11 METAL CHIP 100 5% 1/10W
R9715 1-216-812-11 METAL CHIP 180 5% 1/10WR9716 1-216-809-11 METAL CHIP 100 5% 1/10WR9717 1-216-817-11 METAL CHIP 470 5% 1/10WR9718 1-216-809-11 METAL CHIP 100 5% 1/10WR9719 1-216-839-11 METAL CHIP 33K 5% 1/10W
* A-1410-935-A H4 Board Complete
4-091-677-01 HOLDER (B), LED
< CONNECTOR >
CN9801 * 1-764-088-11 PIN, CONNECTOR (PC BOARD) 3P
< DIODE >
D9801 6-500-808-01 DIODE NSPW515BSA0D9802 6-500-808-01 DIODE NSPW515BSA0D9803 6-500-808-01 DIODE NSPW515BSA0D9804 6-500-808-01 DIODE NSPW515BSA0
< TRANSISTOR >
Q9801 8-729-907-00 TRANSISTOR DTC114EU
H4U1 H3
REF.NO. PART.NO DESCRIPTION REMARK REF.NO. PART.NO DESCRIPTION REMARK
- 63 -
H4
Q9802 8-729-907-00 TRANSISTOR DTC114EUQ9803 8-729-907-00 TRANSISTOR DTC114EUQ9804 8-729-907-00 TRANSISTOR DTC114EU
< RESISTOR >
R9801 1-216-809-11 METAL CHIP 100 5% 1/10WR9802 1-216-809-11 METAL CHIP 100 5% 1/10WR9803 1-216-809-11 METAL CHIP 100 5% 1/10WR9804 1-216-809-11 METAL CHIP 100 5% 1/10W
MISCELLANEOUS
1-758-986-21 GLASS, OPTICAL FILTER (KE-P37XS1) 1-758-985-21 GLASS, OPTICAL FILTER (KE-P42XS1) 1-805-365-21 PLASMA DISPLAY PANEL (KE-P37XS1) 1-805-349-11 PLASMA DISPLAY PANEL (KE-P42XS1) 1-825-610-12 LOUDSPEAKER (5CM)
1-825-609-11 LOUDSPEAKER (5.5X12CM) £ 1-816-517-21 INLET, AC (WITH NOISE FILTER) 1-468-794-31 REGULATOR, SWITCHING 1-763-659-11 FAN, DC 1-828-864-11 CABLE, COAXIAL
ACCESSORIES AND PACKAGING MATERIALS
1-769-175-21 CABLE, ANTENNA (WITH FILTER) 1-824-338-11 POWER-SUPPLY CORD FERRITE CORE *4-087-863-02 BAG, PROTECTION *4-087-938-01 JOINT *4-102-278-01 INDIVIDUAL CARTON (KE-P37XS1)
*4-102-279-01 CUSHION (UP) (KE-P37XS1) *4-102-280-01 CUSHION (BT) (KE-P37XS1) *4-102-281-01 BOARD, TOP (KE-P37XS1) *4-102-856-01 TRAY (KE-P37XS1) *4-102-225-01 CUSHION (UP) (KE-P42XS1)
*4-102-226-01 CUSHION (BT) (KE-P42XS1) *4-102-227-01 BOARD, TOP (KE-P42XS1) *4-102-228-01 INDIVIDUAL CARTON (KE-P42XS1) *4-102-855-01 ACCESSORY BOX *4-102-224-01 TRAY (KE-P42XS1)
*X-4040-964-1 ASSY, CLEANING CLOTH (FOR U/C) 4-099-720-02 HOOK 4-102-916-11 INSTRUCTION MANUAL(ENGLISH/GERMAN/SPANISH/ FRENCH)
4-102-916-21 INSTRUCTION MANUAL(DANISH/FINNISH/ NORWEGIAN/SWEDISH) 4-102-916-31 INSTRUCTION MANUAL(GREEK/ITALIAN/DUTCH/ PORTUGUESE/RUSSIAN)
REMOTE COMMANDER
1-478-505-11 REMOTE COMMANDER (RM-Y1010)
9-927-471-01
Sony CorporationSony UK
Service Promotions Dept.
English04DP7100-1
Printed in U.K.© 2004.04
A new TV Repair Assistance Tool that combines ease of use and powerful PC software tools toallow you to save valuable time during many TV repairs.
The TRACE interface connects to the PC's serial port. It providesconnection to the TV's I2C bus and can be provided with an InfraRedtransmitter (optional).
The interface is powered by a standard 9 V PP3 battery for portableuse, and can also be powered by an external 9V/25mA DC powersupply.
The TRACE software that is supplied with the interface allows you to:
With the optional IR Add-on kit, the following features can be added:
Additional features such as Adjustments and Troubleshooting areavailable in chassis-dependent software modules. Please contact yourlocal Sony Service organisation for the latest information.
•••
Read, restore and compare NVM contents via the I2C busAcknowledge check of all I2C devices in the TV setRead Error Codes (emulation of the Error Reader tool)
Remote Commander emulationUser programmable Functional Check through InfraredFast and documented Test Mode setting of all Sony TV chassis
•••
Partnumbers: TRACE Starter Kit (TRACE interface + software): 9-948-320-70TRACE Software (for users of the I2C Link interface): 9-948-340-80TRACE IR Add-on (IR interface + Remote Commander software): 9-948-320-80
PC requirements: IBM-compatible PC with operating system Windows95, Windows98, or WindowsNT*.
* WindowsNT only supported with TRACE interface
Note: For workshops already using the existing I2C Link parallel port interface (9-948-320-30), this software can be used as well, replacing theTV Data Handling software (9-948-340-50), but Error Reader and IR functions can only be accessed with the TRACE interface.
![Zakir Naik ke Non-Muslims ke 20 sawalon ke jawab [hindi]](https://img.pdfslide.us/doc/110x75/577d26f31a28ab4e1ea2a1ca/zakir-naik-ke-non-muslims-ke-20-sawalon-ke-jawab-hindi.jpg)
