Embed Size (px)
DESCRIPTION
usb computadora
Citation preview
Question:
Knowledgebase
The way the 2404-VLZ3 uses the USB to record is by utilizing specific subgroups on the mixer.
There are two switches in the master section labeled “USB OUT.”
When the CH1-2 switch is pressed in it will send the main mix to the USB.
The volume of this recording is set by the individual channel faders (sliders).
Make sure you have good levels throughout the board and that all your channels are routed to come through the Main Mix (L/R Switch at bottom of each channel.)
If the signals are still not loud enough you will have to individually gain up the channels you are recording either through the gain trim or the fader.
Answer:
USB Recording with the VLZ3/VLZ4 2404, 3204
Mackie.comPhone: 425.487.4333 • Toll-free: 800.898.3211Fax: 425.487.4337 Email: [email protected]
16220 Wood-Red Rd NE •Woodinville, WA•98072•USA
How does the 2404-VLZ3 work for recording?
