Kayman Ledtex

1

www.kymanledtex.com

2

Since our launch in 2006, the LED lighting has experienced many significant changes, not just in technological advances but also in product choice and diversity. LED light engines are now producing over 100 lumens per Watt and improve-ments in white light technology and colour rendering mean that LED’s can now be considered for most commercial lighting applications. We have also seen significant reductions in the manufacturing costs of LED technology which means that LED lighting is now a commercially viable solution for many businesses. 2012 was a significant year for Kyman Ledtex with the introduction of the KYMAN® brand and many new additions to our product portfolio such as the KYMAN ‘smart’ range and LED ready fittings. At Ky-man Ledtex, we continue to strive to provide our customers with the latest technology whilst maintaining appropriate levels of stock and a competitive pricing structure.

Project ManagementAt Kyman Ledtex we do a lot more than just supply lighting products. Our goal is to exceed expectations of not just our wholesaler network, but their customers too. We can be involved at any stage of a project and can offer a full ‘turn-key’ service from product demonstrations and site surveys to full project management and installation. We can also provide lighting design plans, energy savings reports and we can also offer advice on funding op-tions. Based on the information you give us, we will work out your current usage, projected usage and return of investment including maintenance savings.

Original Equipment ManufacturingIf you are looking to develop a new product or are simply looking to supply a more reliable product then we can help. We offer a full manufacturing service from simple re-branding and product testing to full research and develop-ment. Minimum order quantities may apply.

3

ContentsLamps & TubesDichroic Replacement.............................................................................................. 6-7Candle & Golf Balls.................................................................................................. 8-9A60 GLS Lamps.................................................................................................... 10-11AR111 Lamps......................................................................................................... 12-13PAR 30 Lamps...................................................................................................... 14-15PAR 38 Lamps....................................................................................................... 16-17T8 SMD LED Tubes.............................................................................................. 18-19T5 SMD LED Tubes............................................................................................. 20-21SB G24 (PL) Replacement Lamps....................................................................... 22-232G11 (PL-L) Replacement Lamps...................................................................... 24-252D LED Lamps.................................................................................................... 26-27Son Replacement Lamps.................................................................................... 28-29

Luminaires & FittingsRDM Downlighters............................................................................................... 32-33Commercial 12W Downlight............................................................................... 34-35Commercial 17W Downlight............................................................................... 36-37Commercial 22W Downlight.............................................................................. 38-39Ceiling Panels.................................................................................................... 40-41Multipurpose Floods........................................................................................... 42-43Heavy Duty Floods............................................................................................... 44-45High Bay – Standard............................................................................................ 46-47High Bay – Super Bright..................................................................................... 48-49Smart 2D Bulkheads........................................................................................... 50-51Smart Modular.................................................................................................... 52-53Smart Rail Batten.............................................................................................. 54-55Under Shelf Lighting......................................................................................... 56-57IP20 LED Batten................................................................................................ 58-59Vapour Proof LED Batten................................................................................... 60-61

Control GearsEMG Maintained LED Emergency Module......................................................... 64-653W Non Maintained Emergency Kit................................................................ 66-67Full Brightness Emergency Module.................................................................. 68-69

www.kymanledtex.com

4

LAMPS & TUBES

5

www.kymanledtex.com

6

KYMAN® unique LED spotlights are as-sembled using top quality multi-core LED’s. They offer high colour rendering (Ra>85) to maximise true colours where colour definition is important. The LED’s are side facing so that the light is projected directly onto the high performance reflector. This in turn enables better beam control, reduced glare and provides a higher optical efficiency resulting in maximum energy savings. Dimmable models can work on most leading and trailing edge dimmers with a possible dimmable range of 1%-100%. KYMAN® LED Spotlights are designed to look similar to the traditional Dichroic Halogen ap-pearance and are aesthetically pleasing.

Features• High CRI (Ra>85) provides high colour definition• Smooth dimming, range from 1% to 100%• Works with most Leading and Trailing edge dimmers• Traditional Dichroic looks• LED lamps suitable for simple (retrofit) replacement of halogen lamps• Temperature operating range: -30°C to +45°C Ambient temperature• Side facing LED’s to project light more evenly and reducing Glare• Low light degradations• Long life time up to 35,000 Hours• Environmentally friendly, low carbon footprint and no mercury

MR16 5W NON DIMMABLE

GU10 5W NON DIMMABLEGU10 5W DIMMABLE

GU10 8W DIMMABLE

7

Features• High CRI (Ra>85) provides high colour definition• Smooth dimming, range from 1% to 100%• Works with most Leading and Trailing edge dimmers• Traditional Dichroic looks• LED lamps suitable for simple (retrofit) replacement of halogen lamps• Temperature operating range: -30°C to +45°C Ambient temperature• Side facing LED’s to project light more evenly and reducing Glare• Low light degradations• Long life time up to 35,000 Hours• Environmentally friendly, low carbon footprint and no mercury

Note:Installation should be carried out by a qualified person

Based on a 5W 3000K WW Based on a 8W 3000K WW

MR16 5W GU10 5W GU10 5W GU10 8W

Technical Specification

Total power consumption: 5W/8W

Working voltage: 240VAC

CRI: Ra>85

Dimming: Most leading & trailing edge dimmers

Working temperature: -30°C~+45°C

Life span: 35,000 Hours

Height Lux

0.5m

1m

1.5m

2m

2200

550

250

140

35°

Height Lux

0.5m

1m

1.5m

2m

3200

800

355

200

35°

49.9

50.5

49.9

55

49.9

21

55

49.9

79

www.kymanledtex.com

8

DIMMABLE

Product Code Colour LumensWattage

CAN3W81R 2700K (WW) 225 lm3W

CAN3W82R 5500K (CW) 250 lm3W

CAN5W81R

CAN5W82R

GLO3W81R

GLO3W82R

GLO5W81R

GLO5W82R

2700K (WW)

5500K (CW)

2700K (WW)

5500K (CW)

2700K (WW)

5500K (CW)

Lamp Type

CANDLE

CANDLE

CANDLE

CANDLE

GLOBE

GLOBE

GLOBE

GLOBE

305 lm5W

340 lm5W

225 lm3W

250 lm3W

305 lm5W

340 lm5W

Base Cap

BC,SBC,ES,SES

BC,SBC,ES,SES

BC,SBC,ES,SES

BC,SBC,ES,SES

BC,SBC,ES,SES

BC,SBC,ES,SES

BC,SBC,ES,SES

BC,SBC,ES,SES

KYMAN® Candle and Golf ball lamps aredesigned to replace existing incandescent lampswith the same lighting and reflecting effects.With aesthetics in mind, these lamps are designedto keep the traditional appearance.

These KYMAN® Candle and Golf ball lamps areassembled using the highest grade componentsto maximise the quality and lifespan of the lamps.For added safety KYMAN® lamps are built withisolated drivers which ensure that any exposedmetallic parts are free from electric current.These lamps will last up to 25 times longer thanthe original incandescent versions and have anextremely low running cost.

OptionsAvailable base caps:

•BC,SBC,ES,SES

Applications•Hotels,Restaurants

•Publichouses,Domestic

Features•Lowpower,Longlife

•Dimmable

Benefits•Reducedenergycosts

•Upto25timeslifespanofincan-

descent

•Morecontrol

CANDLE & GOLF BALL

9


Power: 3W/5W

Colour temp: 2700K/5500K

Glass colour: Clear

Power factor: >0.7

CRI: Ra 80

Input voltage: 230VAC

Input current: 15mA

Beam angle: 360°

Dimming type: Leading / trailing edge


Base cap : E14/E27/B15/B22

LED life: 30,000 Hours

E14

120

1

36 0.5

B22

123.

61

35 0.5

E27

127.

161

35 0.5

Globe lamp dimensions available on request

Note:Installation should be carried out by a qualified person.

Based on 3W Warm White model

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

62

17

11

8

5

360°

www.kymanledtex.com

10

KYMAN® A60 lamps are designed to replaceexisting incandescent lamps with the same lightingand reflecting effects.

These KYMAN® A60 lamps are assembled usingthe highest grade components to maximise thequality and lifespan of the lamps. For added safetyKYMAN® A60 lamps are built with isolated driverswhich ensure that any exposed metallic parts arefree from electric current. These lamps will last upto 30 times longer than the original incandescentversions and have an extremely low running cost.

Features•Die-castingaluminiumalloyheatsink•Smoothdimming,rangefrom5%to100%•WorkswithmostLeadingandTrailingedgedimmers•Beamangle180°•NoUVorRFinterference•Goodcolourrendering

A60 LEDDIMMABLE

11

Features•Die-castingaluminiumalloyheatsink•Smoothdimming,rangefrom5%to100%•WorkswithmostLeadingandTrailingedgedimmers•Beamangle180°•NoUVorRFinterference•Goodcolourrendering

A60 LED 7W CWNote:Installation should be carried out by a qualified person.


Total power consumption: 7W


Dimmer Type: Most leading & trailing edge dimmers

CRI: Ra>75


Protection: IP54

Beam angle: 180°

Life span: 40,000 hours

Based on A60 LED 7W CW

Height Lux

1m

1.5m

2m

2.5m

118

82

30

19

180°

www.kymanledtex.com

12

KYMAN® unique AR111 LED spotlights areassembled using top quality multi-core LED’s.They offer high colour rendering (Ra>88) tomaximise true colours where colour definitionis important. The LED’s are reverse facing whichprojects the light directly onto the highperformance reflector. This in-turn enablesbetter beam control, reduced glare and providesa higher optical efficiency. Dimmable models canwork on most leading and trailing edge dimmers,with a possible dimmable range of 1%-100%.

KYMAN® AR111 LED Spotlights are designedto look similar to the traditional AR111 tungstenfilament appearance and are aesthetically pleasing.For added safety KYMAN® LED lamps are equippedwith isolated drivers which ensure that any exposedmetallic parts are free from electric current.

Options•Availablebasecaps:GU10/G53

•Beamangles:12°/24°/35°

•WW(3000K)CW(5000K)

Applications•Hotels,Salons

•DesignStudios

•Galleries,Museums

•Restaurants,ShoppingMalls

Features•Reversefacingmulti-coreLED

•Highcolourrenderingindex

(Ra>88)

•Dimmable(1-100%)

Benefits•Reducedglare

•Promotesnaturalcolour

•Morecontrol

AR111

Ordering

Product Code Colour Lumens

AR118G101-12 3000K (WW) 500

AR118G102-12 5000K (CW) 550

AR118G101-24

AR118G102-24

AR118G101-35

AR118G102-35

AR118G531-12

AR118G532-12

AR118G531-24

AR118G532-24

AR118G531-35

AR118G531-35

3000K (WW)

5000K (CW)

3000K (WW)

5000K (CW)

3000K (WW)

5000K (CW)

3000K (WW)

5000K (CW)

3000K (WW)

5000K (CW)

Beam Angle

12°

12°

24°

24°

35°

35°

12°

12°

24°

24°

35°

35°

Intensity (cd)

11000

11000

4200

4200

2000

2000

11000

11000

4200

4200

2000

2000

500

550

500

550

500

550

500

550

500

550

Base Cap

GU10

GU10

GU10

GU10

GU10

GU10

G53

G53

G53

G53

G53

G53

DIMMABLE

13


Rated voltage: 220~240VAC

Working voltage: 100V-240VAC

Surge voltage: 500V

Frequency: 50/60Hz

Lamp wattage: 10W

Lamp current: 63mA

Power factor: >0.7

Dimming system: leading and trailing edge

Operating temperature: -30°C~+40°C

Dimming range: 1%-100%

Beam angle: 12°/24°/35°

Light intensity: (cd) 11000/4200/2000

Colour rendering index: Ra>88

Benefits•Reducedglare

•Promotesnaturalcolour

•Morecontrol

Based on 10W (CW)

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

557

1670

793

437

272

35°


www.kymanledtex.com

14

KYMAN®uniqueLEDPARSERIESspotlightsareassembled using top quality multi-core LED’s.They offer high colour rendering (Ra>88) tomaximise true colours where colour definition isimportant.

The LED’s are reverse facing which projects thelight directly onto the high performance reflector.This in turn enables better beam control, reducedglare and provides a higher optical efficiency,resulting in maximum energy savings.Dimmable models can work on most leading andtrailing edge dimmers, with a possible dimmablerange of 1%-100%.

KYMAN® LED Spotlights are designed to looksimilar to the traditional reflector lamps inappearance.

Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45°C Ambient temperature•Lowlightdegradations•Longlifetimeupto40,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury

PAR30

DIMMABLE

15




Power factor: Ra>88


Beam angle: 12°/24°/35°



Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45°C Ambient temperature•Lowlightdegradations•Longlifetimeupto40,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury


LuxandPolarchartbasedona10WPAR303000KWW35°

Height Lux

0.5m

1m

1.5m

2m

8000

2000

900

500

35°

www.kymanledtex.com

16

KYMAN®uniqueLEDPARSERIESspotlightsareassembled using top quality multi-core LED’s.They offer high colour rendering (Ra>88) tomaximise true colours where colour definition isimportant.

The LED’s are reverse facing which projects thelight directly onto the high performance reflector.This in turn enables better beam control, reducedglare and provides a higher optical efficiency,resulting in maximum energy savings.Dimmable models can work on most leading andtrailing edge dimmers, with a possible dimmablerange of 1%-100%.

KYMAN® LED Spotlights are designed to looksimilar to the traditional Halogen tungsten filamentappearance and are aesthetically pleasing.

Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45 °C Ambient temperature•Lowlightdegradations•Longlifetimeupto45,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury

PAR38

DIMMABLE

17

Features•VeryhighColourRenderingproperties(Ra>88) for when Natural Colours isrequired•Smoothdimming,rangefrom1%to100%•WorkswithmostLeadingandTrailingedgedimmers•Traditionallooks•LEDlampssuitableforsimple(retrofit)replacement of halogen lamps•Temperatureoperatingrange:-30°Cto+45 °C Ambient temperature•Lowlightdegradations•Longlifetimeupto45,000Hours•Environmentallyfriendly,lowcarbonfootprint and no mercury


LuxandPolarchartbasedona20WPAR383000KWW35°

Height Lux

0.5m

1m

1.5m

2m

14400

3600

1600

900

35°




Power factor: Ra>88


Beam angle: 12°/24°/35°



www.kymanledtex.com

18

These high spec KYMAN® T8 SMD tubes areproduced to the highest possible build quality.They have a built in (high power factor) isolateddriver maximising tube efficiency with total inrushprotection to safeguard vital componentsfrom over-load, over-heat and power surges.They also have shatter proof polycarbonateopal lens and adjustable end caps as standardto allow for optimal direction of light.

The KYMAN® T8 SMD tubes are configuredusing single ended power and non-conductiveend caps to ensure simple and safe installation.Emergency modules available

T8 SMD TUBES

Product Code Size Colour Lumens Power

T806010L1 588 (2ft) x 26mm 4500K (NW) 855 10W

T806010L2 588 (2ft) x 26mm 5500K (CW) 900 10W

T809012L1

T809012L2

T812018L1

T812018L2

T815023L1

T815023L2

T818028L1

T818028L2

T824036L1

T824036L2

891 (3ft) x 26mm

891 (3ft) x 26mm

1198 (4ft) x 26mm

1198 (4ft) x 26mm

1496 (5ft) x 26mm

1496 (5ft) x 26mm

1764 (6ft) x 26mm

1764 (6ft) x 26mm

2374 (8ft) x 26mm

2374 (8ft) x 26mm

4500K (NW)

5500K (CW)

4500K (NW)

5500K (CW)

4500K (NW)

5500K (CW)

4500K (NW)

5500K (CW)

4500K (NW)

5500K (CW)

1090 12W

1150

1630

1715

2040

2150

2300

2420

3100

3265

12W

18W

18W

23W

23W

28W

28W

36W

36W

Ordering

Options•AvailableinNaturalorCoolWhite

•Emergencymoduleavailable

Applications•Offices

•Corridors&Walkways

•Warehouses&Factories

•Storerooms

•Shoppingcentres

Features•Longlife(upto50,000hrs.)

•Singleendedpower

•Nonflicker/instantstart

•Rotableendcap

•Isolateddrivers

Benefits•Opallensreducesglare

•Reducedenergybills

•Reducedmaintenancecosts

•Quicker/saferinstallation

•Improvedworkingconditions

•SuitableforusewithDaylight

and occupancy sensors

19

Installation Guidelines•Beforeinstallation,maintenanceorlampreplacement, please ensure that mains supply is switched off.•Removeexistingfluorescenttubeandstarter.•Forelectronicballast,youmustre-wirethelampholderstoprovidesingleendedpower(L+N)only.Pleaserefertothewiringdiagram.•ForSwitchstartfittings,bypassingorremovingtheexistingballast is optional. You can retro fit the lamp without any modifi-cation to the fitting, but you MUST take out original STARTER and replace with LED BRIDGE

STARTER•InserttheKymanLedtexSMDtubeintothefitting.•Ensureallscrews/clipsaresecuredandallwiringissafelyprotected before switching on power.


0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

1174

446

248

178

91

140°


Connector: Rotatable G13


Power factor: >0.96

CRI: Ra 80

Protection: IP20

Beam angle: 140°

Working temp: -30°C~+45°C

Polar/Luxchartbasedonanopal5ftT8SMDtube

www.kymanledtex.com

20

Our T5 Lamps are assembled using high grade SMD HB LED’s and the highest quality compo-nents toensure optimal levels of light output combined with efficient heat management.

They are available in a wide range (10W-30W)offering a direct replacement for existing T5fluorescent tubes.

T5 SMD TUBES (EXTERNALDRIVER)

Options•10W/21W/30W

•DaylightWhite(DW)

•NaturalWhite(NW)

Applications

•Refrigeration

•Tasklighting

•Displays

•Corridors

Features•Longlife:50,000hrs

•LowPower

•MercuryFree

Benefits•Reducedmaintenancecosts

•ReducedenergybillsandCo2

•Idealforfoodprocessing

environments

21

T5 SMD TUBES (EXTERNALDRIVER)Wiring Diagram

Before:

Caution: Use the specific matching external power supply

After:100 240VAC Input

Fluorescent

Either pin to be connected Either pin to be connected

Constant currentMax. 36VDC Output

External PowerSupply

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

1331

546

287

164

101

120°

Based on 5ft 24W Lamp.

www.kymanledtex.com

22

KYMAN®SBG24(PL)replacementlamps have been specially adapted to fit intoexistingG24(d/q)2&4pinfittings,complete with a rotatable base cap which enable the beam pattern to be adjusted,delivering precise light distribution. In-stalled with the latest superbright LED’s producing higher lumens per watt, they make a good solution for direct replace-ment of CFL lamps. Opal lens coverensure soft and evenly light distributions, limiting glare and keeping the traditional look of a CFL.

KYMAN®SBG24(PL)replacementlamps are equipped with isolated and constant current driver ensuring opti-mum stability and longevity. Compatible emergency inverter available forthese lamps, should you require emer-gency lighting applications.

SBG24(PL)REPLACEMENTLAMP

Options•Availablein8or10Watts

•NaturalWhite(4000K)

•CoolWhite(5500K)

Applications•Corridors

•Shoppingcentres

•Hospitals

•Schools

Features•Corridors

•Shoppingcentres

•Hospitals

•Schools

Benefits•Universal

•Simpleinstallation


•Reducedenergybills&Co2



23

SBG24(PL)REPLACEMENTLAMP

Height Lux

1.0m

2.0m

166

42

3.0m 20

120°

200

= 99%cd/klmC0 - C180 C90 - C270

100

90º

75º

60º

45º 30º 30º15º 15º0º

105º

120º

135º

90º

75º

60º

45º

105º

120º

135º

150

200

250

300

180º

Installation Guidelines•Disconnectmainssupply•Removestarter•BypassexistingballastandconnectadirectLiveto1pinofthelamp and then connect a Neutral feed to the other pin.•InsertPLlamp•Checkwiringbeforeswitchingonmainssupply


PolarandLuxchartbasedon8WG24SB082

Lux chart based on 10W G24SB082

Height Lux

1.0m

2.0m

166

51

3.0m 24

Height Lux

1.0m

2.0m

206

120°

21.70 L

W

D

www.kymanledtex.com

24

KYMAN® 2G11 lamps are assembled using the highest grade SMD LED’s and components to ensure reliability and efficient heat management to ensure op-timal levels of light. Integrated constant current LED driver generates less heat and lengthens the life of the lamp.

DesignedtoreplaceconventionalPL-Llamps, the KYMAN® 2G11 will easily out perform its predecessor, offering up to 50,000hrs lamp life, high lumen output, low power consumption and better qual-ity light.

2G11(PL-L)REPLACEMENTLAMP

Options•Availablein8W/12W/18W/22W

•NaturalWhiteorCoolWhite

•Emergencyoptionavailable


•Shoppingcentres•

Hospitals

•Schools

Features•Lifespanupto50,000hrs

•LowPower(8W-22W)

•HighefficiencyIsolateddrivers


•Reducedenergybills&Co2



25

2G11(PL-L)REPLACEMENTLAMP

Based on 22W Lamp

Installation Guidelines•Disconnectmainssupply•Removestarter•BypassexistingballastandconnectL/N•Insert2G11lamp•Checkwiringbeforeswitchingonmainssupply



2G11 (4-pin) connectors

Working Voltage: 100V-240VAC

Power: 8W/12W/18W/22W

Length: 227mm (8W) 322mm (12W)

Length: 417mm (18W) 547mm (22W)

Protection: IP44

Beam Angle: 120°

Working temp: -20°C~+40°C

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

1750

570

263

155

105

160°

Live NeutralLive Neutral

www.kymanledtex.com

26

KYMAN® LED 2D lamps have been designed to operate like a standard fluorescent 2D lamp and will fit into most existing fittings with little to no altera-tions required. Advance driver technology incorporates over-load, power surge and overheat protection which allows these lamps to operate continuously without fear of overheating and will have anaverage lamp life of up-to 50,000 hours.

KYMAN® LED 2D lamps are ideal for hallways, stairways, commercial applica-tions and many more. They are compatible with most types of occupancy sensors and the operating life does not get affected by thecontinuousON/OFFcycleswhenusedin conjunction with sensors. Instant start up, full brightness and no flicker, combined with at least 70% energy saving compared to conventional CFL 2D’s making these lamps ideal for applications where mainte-nance and reliability are critical.

2DREPLACEMENTLAMP

Ordering

Product Code

2D1281-V2

2D1289-V2

2D1282-V2

Colour Lumens

3000K-3500K (WW) 900

4000K-4500K (NW) 950

5000K-5500K (DW) 1000

Options•Warmwhite(WW)

•Naturalwhite(NW)

•Daylightwhite(DW)



•Walkways

•Stairwells

•Coldstores

•Subways

•Schools

•Hotels

•Hospitals

•Carparks

Features•Lowpower(11W)

•LongLife(upto50,000hours)

•Designedtofitmostexisting2D

bulkheads

•Uniqueconnectorboxdesign

•Highgrade/HighbrightnessDIP

LED’s

Benefits•Reducedenergybills


•Furthercostsavingsonhousing

•Compatiblewithmostexistinggeartrays

•Uniformlightoutputwithminimallumen

depreciation

27

2DREPLACEMENTLAMP

Installation Guidelines•Beforeinstallation,maintenanceorlampreplacement,pleaseensurethat mains supply is switched off.•Removelampandstarterthenremoveorbypasstheballast.•FitLED2Dreplacementlamptoexistingfitting/housing.•Ensurelampissecurelyfittedandallsafetycheckshavebeencarriedout•Replacethehousingcover/switchonpower.


20 0

158. 7

158.

7

7935

4017

200

AC I N


Frequency: 50Hz/60Hz


Power factor: >0.9

CRI: Ra 80

Beam angle: 120°

Protection: IP44

LED quantity: 210

Base: GR10 ( 4-pin)

Working temperature: -25°C ~ 45°C



•Furthercostsavingsonhousing

•Compatiblewithmostexistinggeartrays

•Uniformlightoutputwithminimallumen

depreciation0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

1200

380

180

100

65

120°

www.kymanledtex.com

28

SONV2LAMPKYMAN®SONV2replacementlampsaredesigned to replace traditional Son and metal halide lamps.

They are assembled using high gradeSMD LED’s and components to ensure optimal levels of light output combined with efficient heat management.

These lamps are suitable for a whole range of different applications from exterior bol-lard lamps to SON low-bay fittings.

Options•ESandGESCap

•CoolWhite(CW)

•NaturalWhite(NW)

Applications•Industrial

•Hospitals

•Schools

•SportsHalls

Features•Longlife

•LowPower

•Isolateddrivers


•ReducedenergybillsandCo2



29

SONV2LAMP


Total power consumption: 21W-63W

Light source: 3528 SMD LEDÊs


Power factor: >0.94

CRI: Ra 80


Protection: IP20

Beam angle: 360°

194mm

��mm

��mm

��mm

1��mm�

94mm

94mm

94mm

21W 32W 42W 63W

www.kymanledtex.com

30

LUMINAIRES & FITTINGS

31

LUMINAIRES & FITTINGS

www.kymanledtex.com

32

The KYMAN® 6” and 8” LED recess mounteddownlights are ideal for the complete replacementoftraditionalPL-CandPL-Tdownlights.Withitsastounding fusion of performance and design, thisrange has achieved excellent performance with over67Lumen/W.

Suitable for a wide range of interior applications, such asoffices, hospitals and communal areas, elegant lighting inreception areas, corridors and hotel rooms and effectivelighting in kitchens, bathrooms and living rooms.

RDM DOWNLIGHTERS

Features•Supportsdimmingwithphasecutting

dimmer (Triac Dimmer).

•Ruggedaluminiumdiecast.

•Availableinroundorsquare.

Benefits•Doesnotcontainmercury.

•Maintenancefreeforlifespanof35,000hours.

•Nocolourdegredationwithpowdercoating.

•Speciallydesignedwith8W,16W,24Wand30Woptions.

33

ø184.8

206.6109.6


Connector: IEC60320 C8 Socket

Working voltage: 240VAC, 50-60Hz

Power factor: >0.9

CRI: Ra 80

Protection: IP44

Dimming: Leading & Trailing edge

0

42

85

127

169

212

= 99%cd/klmC0 - C180 C90 - C270

90°-90°

0°

0

83

166

248

331

414

= 99%cd/klmC0 - C180 C90 - C270

90°-90°

0°

1m

Height Lux

2m

3m

75

19

39

119°

1m

Height Lux

2m

3m

411

103

46

112°

PolarandLuxchartbasedonDL8RND69

PolarandLuxchartbasedonDL16RND69

RDM DOWNLIGHTERS

www.kymanledtex.com

34

HALO-C™ 12W DOWNLIGHTThe KYMAN® HALO-C™ range of LED Commercial downlights offers a truly superior alternative to traditional compact fluorescent luminaires. Strict quality control procedures ensure that all HALO-C™ Commercial downlights are manufac-tured to the highest possible standards allow-ing for optimal levels of light output combined with efficient heat management and maximum longevity.

For added safety KYMAN® HALO-C™ luminaires are equipped with isolated drivers which ensure that any exposed metallic parts are free from electric current, over-load, power surge and overheat protection.

Features a low power output and delivers up to 50,000 hours lamp life. Install and instantly reduce your energy bills and maintenance costs dramatically. LED lamps also have a lesser heat profile so would be ideal for any retail environ-ment. Flexible and light weight unit can be installed from below or above the ceiling.


•Naturalwhite(NW)

•Coolwhite(CW)

•Emergencyoptions

available


•Schools

•Hospitals

•Hotels

•Shoppingcentres



•NoflickerorharmfulUVrays

•Optimalheatdissipation

•HBLED’s(9x1W)




•Longerlife/slowerlight

degradation

•Highefficiency

35

HALO-C™ 12W DOWNLIGHT

Unit:mm

145.5

170.

8

142

117


0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

527

151

70

41

27

80°


9x1W high powered LED



LED working current: DC320Ô20mA


Protection: IP44

Beam angle: 80°

Power factor: >0.85

Cut-out: 122 2mm-+

www.kymanledtex.com

36

HALO-C™ 17W DOWNLIGHTThe KYMAN® HALO-C™ range of LED Commercialdownlights offers a truly superior alternative totraditional compact fluorescent luminaires.

Strict quality control procedures ensure that allHALO-C™ Commercial downlights are manufac-tured to the highest possible standards allow-ing for optimal levels of light output combined with efficient heat management and maximum longevity.


Features a low power output and delivers up to 50,000 hours lamp life. Install and instantly reduce your energy bills and maintenance costs dramatically. LED lamps also have a lesser heat profile so would be ideal for any retail environ-ment. Flexible and light weight unit can be installed from below or above the ceiling.


•Naturalwhite(NW)

•Coolwhite(CW)

•Emergencyoptions

available


•Schools

•Hospitals

•Hotels

•Shoppingcentres





•HBLED’s(15x1W)




•Longerlife/slowerlightdegradation

•Highefficiency/highbrightness

37



Unit:mm

198

173 138

228

140.5

2

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

1825

460

228

125

79

80°







Protection: IP44

Beam angle: 80°

Power factor: >0.95

Cut-out: 173 2mm-+

www.kymanledtex.com

38

HALO-C™ 22W DOWNLIGHTThe KYMAN® HALO-C™ range of LED Commercialdownlights offers a truly superior alternative totraditional compact fluorescent luminaires.

Strict quality control procedures ensure that allHALO-C™ Commercial downlights are manufac-tured to the highest possible standards allow-ing for optimal levels of light output combined with efficient heat management and maximum longevity.


Features a low power output and delivers up to 50,000 hours lamp life. Install and instantly reduce your energy bills and maintenance costs dramatically. LED lamps also have a lesser heat profile so would be ideal for any retail environ-ment. Flexible and light weight unit can beinstalled from below or above the ceiling.


•Naturalwhite(NW)

•Coolwhite(CW)

•Emergencyoptions

available


•Schools

•Hospitals

•Hotels

•Shoppingcentres





•HBLED’s(20Wx1W)




•Longerlife/slowerlightdegradation

•Highefficiency/highbrightness

39



Unit:mm

245

222 170

248

174

2

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

3180

750

347

192

120

80°







Protection: IP44

Beam angle: 80°

Power factor: >0.95

Cut-out: 222 2mm-+

www.kymanledtex.com

40

V2CEILINGPANELSKYMAN® LED CEILING panels are manufactured using the latest in cutting edge LED technology and offer a direct replacement for existing grid based fluorescent luminaires.Our LED panels are ultra-slim and light-weight and equipped with a high quality opal acrylic diffuser. The SMD LED light strips are embed-ded into recessed groves to ensure optimal light distribution.

KYMAN® panels offer maximum efficiency due the high power factor driver, high brightness LED’s and the latest in thermal management technology. Heat generated by the LED’s is managed by a special heat sink which funnels the heat away from the LEDs. This results in an extremely harmonious and uniformed effect that traditional fluorescent lamps cannot achieve.

Options•Availablein3sizes

•AvailableinNaturalWhite(NW)

and Cool White (CW)



•Schools

•Hospitals

•Hotels

Features•Lowpower

•Longlife(upto50,000hours)


•SimpleInstallation

•Isolateddrivers.Whiteframe

blends aesthetically with ceiling




•Reduceddowntime&maintenancecosts

•SuitableforusewithDaylighta

41

V2CEILINGPANELS


Basedona600x600mmCWpanelPAN663902-V2

Installation Guidelines•Beforeinstallationormaintenancepleaseensurethatmainssupply is switched off.•Disconnect&removeexistingfixture.•LocateL+N+EmainssupplyandconnecttoexternalLEDdriver.•ConnectdrivertoKymanLedtexLEDpanel.•Checkallwiringbeforeswitchingonpower.

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

3540

1291

617

340

214

160°

www.kymanledtex.com

42

MULTI-PURPOSEFLOODSKYMAN® multi-purpose floods represent thenext generation in industrial lighting. They arebuilt using high grade multi-core LED chipscombined with a hi-intensity, prismatic glasscover which reduces glare but offers a crisp,uniformed light output.

KYMAN® LED flood lights can offer up to70%energyreductioncomparedtoHPsodium or mercury lamps and up to 80%compared to incandescent. For added safety,KYMAN® floodlights are equipped withisolateddriversandIP65protectionratingasstandard.

Options•10W/30W/50W/80W

•DaylightWhite(DW)

Applications•Securitylighting

•Loadingbays

•Carparks

Features•HighIntensityprismaticglass

•Adjustablebracket

•IP65Rating

Benefits•Highbrightness/lowluminousdecay

•Rated50,000hours


43

MULTI-PURPOSEFLOODS


Basedona50WDWFLD50152-MPmodel

1.0m

Height Lux

2.0m

3.0m

4.0m

5.0m

1420

467

233

142

100

120°

172mm

80mm

20m

m

150mm40mm 40mm

50mm

290° Transition

FLD10152 - MP

183m

m

200m

m

08mm 06mm

250mm

120mm

30m

m

220mm50mm 50mm

75mm

255° Transition

295m

m

320m

m

015mm011mm

330mm

160mm

30m

m

300mm60mm6 0mm

95mm

270° Transition

365m

m

395m

m

011mm 015mm

165mm

50m

m

355mm

385mm

60mm40mm

011mm 015mm

60mm 40mm

115mm

260° Transition

420m

m

470m

m

FLD30152 - MP

FLD50152 - MP FLD80152 - MP



LED type: SMD

CRI: Ra>80


Total power consumption 39W/75W

Protection: IP54

Power factor: >0.94

Beam angle: 160°

Lumen output: 3975lm/6100lm

Colour temperature: 4000K & 5500K

www.kymanledtex.com

44

HEAVYDUTYFLOODLIGHTSKYMAN® Heavy duty flood lights are highperformance luminaires that use premium grademulti-core LED’s as the light source for optimumlight output with minimal loss over time.The main body is made from high quality die-castaluminium for excellent durability and robust-ness,siliconesealedtoensurewatertightIP65rated protection and special reflector technology are used for even greater lighting efficiency.KYMAN® high powered multi-core light engineand cutting edge driver gives an expected lamp life of up to 50,000 hours ensuring virtuallymaintenance free operation.

For added safety KYMAN® flood lights areequipped with isolated drivers which ensure thatany exposed metallic parts are free from electriccurrent, over-load, power surge and overheatprotection and can work in temperatures rangingfrom of -30°C to +55°C.

Options•88W/110W/156W

•DaylightWhite(CW)

•NaturalWhite(NW)

Applications•Industrial

•Carparks

•Securitylighting

•Coldstores

Features•Doubleemittermulti-coreLED

•HighefficiencyLEDdriver

•Highintensitytoughenedglasscover

•Highefficiencyreflector

Benefits•HighBrightness/Lowluminousdecay

•Longlife/reducedmaintenancecosts

•Durability

•SuitableforusewithDaylightand

occupancy sensors

45

HEAVYDUTYFLOODLIGHTS


Based on a 156W CW FLD140132-HD model

2m

Height Lux

4m

6m

8m

10m

759

275

140

87

58

120°


Total power consumption: 88W/110W/156W


Power factor: >0.9

NET weight: 11.0 KG

CRI: Ra 80


Protection: IP65

Beam angle: 120°

Life span: up to 50,000 hours

www.kymanledtex.com

46

HIGHBAYThe KYMAN® High bay & low bay range repre-sents the next generation of industrial lighting. Assembled with high grade Bridgelux multi-core LED’s toensure optimal light output combined with minimal degradation. High efficiency iso-lated drivers allow the KYMAN® High bay to be used in temperatures between -30°C to +45°C.

Designed specifically to replace conventionalindustrial lighting with high ceilings, the KY-MAN® High bay is easy to install and will deliver high brightness output, low power consumption and up to 50,000 hours lamp life, dramatically reducing your energy bills and maintenance costs. For added safety KYMAN® luminaires are equipped with overheat, overload and power surge protection.

Options•CoolWhite(CW)

•60°/120°BeamAngle

Applications•Warehouses

•Factories

•Sportshall/arena

•Coldstores

Features•Lowpowerconsumption

•Single100Wmulti-coreLED


Benefits•Upto75%energysavings

•HighBrightness/Lowluminousdecay



occupancy sensors, low glare

47

HIGHBAY


520

179N

280

260

Unit:mm

5m

Height Lux

6m

7m

8m

9m

252

188

145

115

93.6

10m 75.3

120°




Power factor: >0.98

CRI: Ra 80

Protection: IP65

Beam angle: 120°

Life span: Up to 50,000 hours

Colour temperature: Daylight white (5500K)

NET weight: 7KG

www.kymanledtex.com

48

HIGH BAY SBThe KYMAN® HIGH BAY SB range representsthe next generation of industrial lighting.Assembled with high grade Bridgelux multi-coreLED’s to ensure optimal light output combinedwith minimal degradation. State of the art highefficiency isolated drivers, using top qualityAmerican and Japanese components that allowthe KYMAN® HIGH BAY SB range to be usedin temperatures between -32°C to +55°C.

Built with reliability and longevity in-mind, which makes them perfect to replace conven-tional industrial lighting with high ceilings. They are easy to install and will deliver high bright-ness output, low power consumption and up to 50,000 hours lamp life, dramatically reducing your energy bills and maintenance costs.

For added safety KYMAN® luminaires are equipped with Thermo-shutdown, overload and power surge protection.

Options•90°/120°BeamAngle

Applications•Warehouses

•Factories

•Sportshall/arena

•Coldstores


•SuperBrightmulti-coreLED






occupancy sensors.

49

HIGH BAY SB




Power factor: >0.96

CRI: Ra 80

Protection: IP54

Beam angle: 90°/120°

Life span: Up to 50,000 hours

Colour temperature: Daylight white (5500K)

NET weight: 8.5KG (120W)/11KG (150W)

Working temp: -32°C to +55°CBased on 120W CW 90 degree beam Based on 150W CW 120 degree beam

120W High Bay 150W High Bay

7m

Height Lux

8m

9m

10m

11m

174

132

104

84

69

90° 9m

Height Lux

10m

11m

12m

13m

123

103

89

73

62

120°

www.kymanledtex.com

50

SMART 2D LED BULKHEADSKYMAN® Smart 2D LED Bulkheads are designed specifically for applications where occupancy is irregular or intermittent.Withanoptionforbuilt-inmicrowave/daylightsensorsanddim-downcapabilitytheselampswill maximise energy savings without having to rely on the human touch to switch them on and off.

Available in 13W or 22W and in emergency version, these state of the art lamps will dim down to 20% when idle and variables such as distance, time and daylight sensitivity can be adjusted to suit the application.

Options•Microwavesensing

•Emergencybackup

•IP54orIP65

Applications•Officeroomsandcomplexes

•Hotels

•Publicbuildings

•Educationalfacilitiesandconferencerooms

•Stairwellsandcorridors

•Washroomsandbathrooms

•Factorysitesandoutdoorfacilities

•Datacentres








occupancy sensors.

79

283

274

2DL65R129

100

325

2DL54R12998

315

2DL65R209

99320

320

2DL65S209

51





occupancy sensors.

Ordering

Product Code Power Microwave Sensor with auto dim down to 20%

Emergency backup Colour Cover Lumen Shape IP Rating Dimension (mm)

2DL54R129 12W 4000K Opal 1150 Round IP54 Ø330x110

2DL54R129-M

2DL54R129-E

2DL54R129-ME

13W

14W

15W

•

•

•

•

4000K Opal

4000K Opal

4000K Opal

1150

1150

1150

Round

Round

Round

IP54

IP54

IP54

Ø330x110

Ø330x110

Ø330x110

2DL65R129 12W 4000K Prismatic 1250 Round IP65 Ø280x110

2DL65R129-M

2DL65R129-E

2DL65R129-ME

13W

14W

15W

•

•

•

•

4000K Prismatic

4000K Prismatic

4000K Prismatic

1250

1250

1250

Round

Round

Round

IP65

IP65

IP65

Ø280x110

Ø280x110

Ø280x110

2DL65�209 20W 4000K Prismatic 1800 ��uar� IP65 315x315x95

2DL65�209-M

2DL65�209-E

2DL65�209-ME

22W

23W

25W

•

•

•

•

4000K Prismatic

4000K Prismatic

4000K Prismatic

1800

1800

1800

��uar�

��uar�

��uar�

IP65

IP65

IP65

315x315x95

315x315x95

315x315x95

2DL65R209 20W 4000K Prismatic 1800 Round IP65 Ø315x99

2DL65R209-M

2DL65R209-E

2DL65R209-ME

22W

23W

25W

•

•

•

•

4000K Prismatic

4000K Prismatic

4000K Prismatic

1800

1800

1800

Round

Round

Round

IP65

IP65

IP65

Ø315x99

Ø315x99

Ø315x99

www.kymanledtex.com

52

SMART MODULAR

Options•Availablewithsuspendedor

surface mount fixings

•CCTNaturalWhite(4000K)or

Cool White (5500K)

Applications•Officeroomsandcomplexes

•Hotels

•Publicbuildings

•Educationalfacilitiesandconferencerooms

•Stairwellsandcorridors

•Washroomsandbathrooms

•Carparks




KYMAN® ‘Smart’ modular luminaires are especially designed forapplications with irregular or intermittent occupancy. With buil-tinPIRmotionsensorsandinfra-redtransmitters,thisstateofthe art lighting system has been designed to maximise energysavings without having to rely on the human touch to switchthem on and off.

These lights can also remotely communicate witheach other and illuminate whole rows or sequencesif required and will dim down to 10% when idle.

53

Based on 46W Lamp

320

62

104

100.3

148.01200 1

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

1750

570

263

155

105

160°



Idle mode power consumption: 4W

Working voltage: 100-240VAC

Beam angle: 160 degrees

Idle dim mode: 10% brightness

Infra-red range : <3 Metres

Protection: IP54

PIR Detection angle: >90 degrees


Life span: Up to 50,000 Hours

www.kymanledtex.com

54

SMART RAIL BATTEN

Features•PR12powdercoatingpreventscolourdegredation.

•Retractablepowerconnector.

•Abletojoinmultiplefixtureswithoutadditionalwiring.

•Batterybackupandmotionsensoroptions.

Benefits•Lowpowerconsumption



These Surface Mounted Lighting fixturesare perfect replacements for 2ft and 4ft T8fluorescent fixtures.

This series comes with optional emergencybackup power which ensures a minimum of 3 hours operation during a power failure. Dual-motion sensors provide two-way occupancy detection and can be manually programmed to dim down between 10%-30%

An Ideal solution for stairwells and corridors that require emergency lighting.

55

IP65 STANDARD Surface mounted light

IP54 Surface mounted light

PIR & Emergency Surface mounted light



Power factor: >0.9

CRI: >Ra 80

Working temp: -20°C~40°C

Sensor: PIR

Detection zone: 360°/8m Diameter (Mounted at 3m)

Detection angle: 140°

ON-time: 1 minute

Battery type: Hi-temp Nickel Metal Hydride

Battery capacity: 4.8V/2200mAh

Charge time: <12 hours

CFIX6012W9-IP65CFIX6012W2-IP65CFIX12024W9-IP65CFIX12024W2-IP65

CFIX6012W9-EMGCFIX6012W2-EMGCFIX12024W9-IP54CFIX12024W2-IP54

CFIX6012W9-PIRCFIX6012W2-PIRCFIX12024W9-EMGPIRCFIX6012W2-EMGPIRCFIX12024W9-PIRCFIX12024W2-PIRCFIX12024W9-EMGPIRCFIX12024W2-EMGPIR

www.kymanledtex.com

56

UNDER SHELF LIGHTING

Options•3colourtemperaturestomeet

different needs, Warm White,

Cool White and Daylight.

Features•Retractablepowerconnector

•Abletojoinmultiplefixtures

without additional wiring.

Benefits•Savesupto60%inenergyconsumptioncompared

to fluorescent tubes.

•Doesnotcontainmercuryand100%recyclable.

•Maintenancefreeforlifespanof35,000hours.

•Flickerfree.

This compact low profile LED under shelf batten offers an ideal lighting solution for many commercial and domestic applications.

Each unit can be operated individually or as a group ofupto8unitsatatime.ItsCompactsizemakesitanidealsolutionforretaillighting,kitchen/undercabinet lighting or task lighting.

57

PolarchartbasedonUSL305W9

PolarchartbasedonUSL3013W9

0

71

141

212

282

353

= 99%cd/klmC0 - C180 C90 - C270

90°-90°

0°

0

15

30

45

61

76

= 99%cd/klmC0 - C180 C90 - C270

90°-90°

0°


Connector: IEC60320 C8 Socket


Power factor: >0.9

CRI: Ra 70

Protection: IP20

Working temp: -20°C~40°C

1m

Height Lux

2m

3m

75

19

39

120°

1m

Height Lux

2m

3m

352

88

39

120°

www.kymanledtex.com

58

LEDIP20BATTEN

Specifications•CertificatedingressprotectionIP20

•Manufacturedfrommildsteel

•ResilientWhitefinish

•Polycarbonatelampholders

•PrismaticdiffuserextrudedfromUVpolystyrene


•Workshops

•Schools

•Corridors

•Receptions

A complete energy efficient solution:TheKYMAN®LEDIP20battensareLEDready-madeluminaires which can be ordered with or withoutdiffuser, or as a complete kit with KYMAN® LEDtubes and emergency pack. With minimal capital outlay, these combo kits offer an economical energy efficient solution for many commercial applications including offices, schools, corridors and waiting rooms etc.

59

Based on a twin 5ft 46W CW batten with diffuser

H93W59 L

Single batten

H91

W105 L

Twin batten

0.5m

Height Lux

1m

1.5m

2m

2.5m

3042

1050

509

301

185

180°

www.kymanledtex.com

60

VAPOURPROOFLEDBATTEN

Specifications •CertifiedingressprotectionIP65.

•Polycarbonateinjectionmouldeddiffusers.

•Cableentries,withgrommetsatbothends,and

further conduit entries on rear of housing.

•Luminairehousingmadecorrosion,moistureand

acid resisting glass fibre reinforced polyester.

Light Grey finish (RAL 7035). Flame resistant with

continuous non-aging gasket.

•Whitepowdercoatedmetalgeartrayfixedtothe

body by flexible gear tray suspension clips.

Applications•Coldstores

•Warehousing

•Manufacturingplants

•Foodpreparationareas

•Undercanopylighting

•Carparks

•Retailsuperstores

•Corridors

A complete energy efficient solution, KYMAN® LED battens are LED ready-made luminaires which can beordered as an empty shell, or with the LED tubes installed (Full kit).

RobustpolycarbonateconstructiontosuitwetorhumidenvironmentsandcertifiedtoIP65(ingressprotection) for permanent and arduous industrial & commercial applications. Heavy duty, long service lifeluminaires for mounting directly onto walls and ceilings.

61

Based on a twin 5ft 46W CW Batten

90

95 A = Fixing centresC = Hangar positions

116

99

LAC

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

3100

1077

521

307

190

140°

www.kymanledtex.com

62

CONTROL GEARS

63

www.kymanledtex.com

64

EMG4 LED EMERGENCY LIGHTING UNIT

KYMAN® EMG4 emergency modules are primarily used to provide emergency lighting for most self-ballast KYMAN® LED lamps, with a maximum load of 80W. Installed as a maintained unit, theKYMAN® EMG4 emergency modules will provide power to KYMAN® lamps at 100% brightness. Should the mains power fail, the EMG4 module will switch to battery mode and dim down the lamp maintaining adequate emergency light levels for a duration of at least 3 hours.

The Emergency modules consist of a battery pack, an integrated emergency power module, charge indicator LED and a test switch. Built into the system is a discharge protection circuit, over current, short circuit and battery low voltage protection.

Pleasecheckforcompatibilitybeforeordering.

65

EMG4 LED EMERGENCY LIGHTING UNIT

Installation GuidelinesKYMAN® EMG4 emergency module in maintained mode is controlledbytheSWITCHEDLIVEinputwhichmaybeswitchedONandOFFatwill to illuminate the lamp at full nominal power. Upon mains failure thelampwillilluminateirrespectiveofwhethertheSWITCHLIVEinputis ON or OFF. This unit requires a permanent supply in maintainedmode.Fornon-maintainedmode,pleaseconnectSWITCHLIVEtoPERMANENTLIVE.

•EMG4emergencymoduleshouldnotbemountednearanyheatsource or where the ambient temperature normally exceeds 25 °C.

•EnergisethePERMANENTLIVEtomainssupplyandcheckiftheGREEN status indicator illuminates, and check for the mains healthoperation of the lamps.

•AllowEMG4emergencymodulestochargeforatleast1hourbeforebrieflytestingtheemergencymode.Pleaseallowafurther72hourscharge before considering the unit to be fully operational to specification.

Warning:PleasemakesurebatteryterminalisconnectedcorrectlyfollowingthewiringcolourcodeandthePositive(+)andNegative(-)indicatorsonthe module.


Working voltage: 100VAC ~ 240VAC


Frequency: 50Hz/60Hz

MAX load: 80W

MAX input current: 1.5A

Charging method: Trickle charge

Battery: 7.2V 2.5Ah

39.2

28. 6

188. 8

243. 0

28.6

12.0

EMG4EMERGENCY MODULE

NEUTRAL

LIVE

AC

IN

OUTPUTTO

LED LOAD

7.2 v BATTERY

TEST SWITCH

STATUSINDICATOR

SWITCH LIVE

www.kymanledtex.com

66

3W EMERGENCY KIT (Non Maintained)

These 3W LED Emergency kit is a completeand easy solution for LED mains emergencyapplications. Designed as a standalone unit,they provide emergency lighting in the event ofpower failure. Includes a 3W recess downlightto enable flush mounting into the ceiling.

These Emergency kits consist of a battery pack,an integrated emergency power module and the3W LED head with the charge indicator builtinto the LED Head. Built into the system is adischargeprotectioncircuitforusewith4.8VNi-Cd (high temp) battery pack

INPUT 220-240VAC 50/60 Hz

LIVENEUTRAL

3W LED HEAD

EMERGENCY BALLAST

BATTER

Y

66mm CUT REQUIRED

86mm

29mm High

LED DOWNLIGHT DIMENSIONS

67

3W EMERGENCY KIT (Non Maintained)Installation GuidelinesThese emergency kits are designed to operate in non-maintained mode only. Upon mains failure the 3W LED lamp will illuminate for a minimum of 3 hours. This unit requires a permanent mains supply.

•Theseemergencykitsshouldnotbemountednearanyheat source or where the ambient temperature normally exceeds 25 °C.

•ConnectBluewiretoNeutralandBrownwiretoPerma-nentLIVE.

•EnergisethePERMANENTLIVEtomainssupplyandcheck if the GREEN status indicator illuminates.

•Allowtheseemergencykitstochargeforatleast1hourbeforebrieflytestingtheemergencymode.Pleaseallowafurther 24 hours charge before considering the unit to be fully operational tospecification.

CEILING

1

66mm

CEILING

2

CEILING

3

CEILING

4

5

CEILING

CEILING INSTALLATIONS

0.5m

Height Lux

1.0m

1.5m

2.0m

2.5m

38

35

15

10

6.5

120°

www.kymanledtex.com

68

15/25WEMERGENCY MODULES (Maintained)

These modules are primarily used to provide emergency lighting for self-ballast lamps with amaximum load of 15W or 25W. Installed as a maintained unit, these emergency modules willpower a lamp of 25W and under at full brightness for duration of at least 3 hours should the main power fail. May also be used as a non-maintained unit.

The Emergency modules consist of a battery pack, an integrated emergency power module, charge indicator LED and a test switch. Built into the system is a discharge protection circuit for usewith12VNi-Cd(hightemp)batterypack.

Options•15WMaximumLoad•25WMaximumLoad

69

Installation GuidelinesThese emergency module in maintained mode is controlledbytheSWITCHEDLIVEinputwhichmaybeswitched ON and OFF at will to illuminate the lamp at full nominal power. Upon mains failure the lamp willilluminate (powered by the battery at full brightness) irrespectiveofwhethertheSWITCHLIVEinputisONorOFF. This unit requires a permanent supply in maintained mode. For nonmaintained mode, please connect SWITCH LIVEtoPERMANENTLIVE.

•Thesemoduleshouldnotbemountednearanyheatsource or wherethe ambient temperature normally exceeds 25 °C.

•EnergisethePERMANENTLIVEtomainssupplyandcheck if the GREEN status indicator illuminates, and check for the mains health operation of the lamps.

•Allowtheseemergencymoduletochargeforatleast1hourbeforebrieflytestingtheemergencymode.Pleaseallow a further 72 hours charge before considering the unit to be fully operational to specification.

Warning:PleasemakesurebatteryterminalisconnectedcorrectlyfollowingthewiringcolourcodeandthePositive(+)&Negative (-) indicators on themodule.

Test Switch

Switch Live

Live Neutral Earth

10 X D 1.2V Cell High Temp Ni-Cd Battery 12V BAT

220V LED TubeEmergency Module

LED LOAD 29mm

41mm

208mm

166mm

217mm

70mm

39mm

316mm

12V Battery


Duration: 3hours

Recharge period: 72hours

Mains input: 100 - 240 Volts

Battery input: 12VDC

Mains current: 0.7A

Charge current: 250mA

Charging method: Trickle charge

Discharge current: 1.6A

THD (Total Harmonic Distortion): <15%

Charge indicator: Green LED

Changeover voltage: 17.5V

Emergency switch time: <1 second

Environmental Policy

At Kyman Ledtex we believe that a sustainable business is dependent on economic vitality, social equity and a healthy natural environment. We do not see these goals as mutually exclusive, but inextricably linked. As market leaders we are committed to developing sustainable business practices that meet the needs of the present without compromising the welfare of future generations. We pledge to develop strat-egies that enable us to move towards sustainability whilst enhancing the value offered to our customers.

Every project, operation or activity will, as part of its management routines, consider its impact on the environment and communities. These management routines must be set up to be cost effective and sustainable.

Kyman Ledtex’s activities positively impact on the environment and the community through it’s:

• constrictive supply chains’ and excellent employment conditions,

• significantly limiting direct and indirect use of non-renewable carbon fuels in its buildings and for freight transport via road and air,

• policy of not using scarce/non-renewable raw materials in the supply chains of the items it purchases,

• strongly encourage our supply chain against the use of harmful materials or high energy consuming processes in the production of the items,

• disposal of waste products in compliance with environmental guidelines,

• relationships with local communities where activities take place,

• welfare of staff, visitors, volunteers, neighbours and other stakeholders.

Kyman Ledtex will follow the principles of Reduce, Reuse, Repair, Recycle in managing its environmental impact. Using the 4Rs will not only minimise environmental impacts, it also makes sound economic sense.

Kyman Ledtex will comply with all relevant legislations.

ECA Compliance :

‘Enhanced Capital Allowances (ECAs) are a straightforward way for a business to improve its cash flow through accelerated tax relief. The ECA scheme provides businesses with 100% first year tax relief on their qualifying capital expenditure. The scheme allows businesses to ‘offset’ the whole cost of the equipment against taxable profits within the first year of purchase. This can provide a cash flow boost and an incentive to invest in energy-saving equipment which normally carries a price premium when compared to less efficient alternatives. So if your business pays corporation tax at 28%, every £1,000 spent on qualifying equipment would reduce its tax bill in the year of purchase by £280.

The ECA scheme for energy-saving technologies encourages businesses to invest in energy-saving products specified on the Energy Technology List (ETL) which is managed by the Carbon Trust on behalf of Government. The ETL list does not list individual LED products due to the sheer number of products available on the market. Instead, they have outlined a set of criteria with which LED lighting must comply in order to qualify for ECA.

Despite what some suppliers are claiming, LED ‘retrofit’ lamps and tubes are NOT eligible for ECA support unless the existing luminaire is also replaced. This is because replacement lamps do not qualify as ‘capital expenditure’.

The majority of KYMAN® complete fittings and luminaires have been fully tested and certified for compliance with the ECA criteria. If you have purchased our products and would like further information, please contact us.

Disclaimer:

‘In line with our policy of continuous research and development, Kyman Ledtex Ltd reserves the right to change specifications without prior notice. The information contained in this publication is representative only of general models and does not form part of a contract. All specifications are believed to be correct at time of going to press and are subject to change without notice.

www.kymanledtex.com

72

Head Office:Unit 4 The Crosshouse Centre

Crosshouse RoadSouthampton

SO14 5GZUnited Kingdom

Tel +44 (0) 2380 632 059Fax +44 (0) 8715 227 819

Enquiries: [email protected]: [email protected]

Documents

Kayman Ledtex