Financing is available through Thomson financial services. Please contact your products representative for more details.

FinancingproFessional services

product data sheet

Our professional services offerings ensure optimal system performance and maximize uptime. These services include call centers staffed around the clock; system planning, design, and commissioning; professional training courses; and technical maintenance programs and service agreements.

www.grassvalley.com/support

www.grassvalley.com

product data sheet

© Copyright 2009 Thomson. All rights reserved. Printed in USA. Profile is a registered trademark and Grass Valley, FlexiKey, DoubleTake, Encore, Jupiter, K2 Summit, Kalypso, Kayenne, Kurl, M-Series, NetCentral, and Turbo are trademarks of Grass Valley, Inc. All other tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies. Specifications subject to change without notice. SWT-3025D

KeY FeaTUres

Fully digital 10-bit 4:2:2 video switcher •with up to 96 inputs and 48 outputs

HD/SD SDI with optional up/down/ •cross converters on selected inputs and outputs

1.5 to 4.5 M/Es •

Half-M/E included in every system •with cut/mix transitions and six linear/luminance keyers

Six keyers in every full M/E: four •full-function keyers plus two linear/ luminance keyers

Full-function keyers have masks, •preset pattern wipes, and optional chroma keyers, etc.

Each full-function keyer has two •pages (frames) of video and key storage to free up Image Store outputs

Four integrated DPMs (iDPMs) in each •M/E with Kurl™ and Spektra

Four independent channels of •eDPM with primary and secondary combiner outputs are available in the 8 RU frame

DoubleTake• ™ (split M/E mode) included as standard on all systems effectively increases the number of M/Es to a total of up to 10

FlexiKey• ™ (programmable clean feed mode) included as standard on all systems for separately programmable configurations of keyers from each M/E output

Any partition can be placed into •layered mode, providing composite video and key outputs

Split-lever arm control of primary and •secondary partitions

Aux bus transitions for dissolves and •wipes on aux bus outputs

Automatic insertion of video in pillars •for 4:3 content into 16:9 production

The Kayenne™ Video Production Center is a new family of production switchers (video mixers) from Grass Valley™.

All Kayenne frames include a half-M/E and scale from 1.5 to 2.5 M/Es in compact (4 RU) frames and from 2.5 to 4.5 M/Es in standard (8 RU) frames. The frame has up to 96 inputs and 48 outputs.

To meet ever-increasing production needs, Kayenne provides the most video processing power available. Each M/E has six keyers. A 4.5 M/E system has up to 30 keyers and 20 DPM channels.

The Kayenne family has a range of state-of-the-art modular control panels scaling from 1 to 4 M/E stripes, accompanied by a local aux panel and a 15:9 high-resolution touchscreen menu.

Kayenne’s panel and menu layout are immediately recognizable and operable for those familiar with Kalypso™ switchers. Additionally, Kayenne incorporates key features from the Kayak switcher family plus many new innovations. Once again, Grass Valley has taken the lead in switcher design by providing the industry with a switcher that is both best-of-breed and the most cost-effective.

Modular Control Panels

Each module of the Kayenne control panel snaps into an extruded aluminum tray, is easily removable, and is hot-swappable. This modularity provides multiple panel configurations ranging in depth from 1 to 4 M/E stripes and a width choice of 35, 25, or 15

(on selected models) source select buttons per row. The control panels are ergonomically designed and can be mounted flat or in a banked curve.

Each source select and aux bus module has two rows of OLED Source Name Displays that provide ultra-clear text and extremely wide viewing angles. All buttons are illuminated with a selection of RGB colors, which dynamically change to indicate context (M/E colors, key colors, source colors, and function colors). Many buttons also have programmable soft functions, which are indicated by a four-character LED display above them, such as those found on the innovative Multifunction Module. Transition Modules have Enhanced Status Displays using easy to read LEDs.

the most powerful video production switcher in the world.

KaYenneVideo production center

Touchscreen Menu Panel

8 RU Video Processing Frame

Frame Model M/Es Inputs Outputs GPI Inputs GPI/Tally Outputs

MatchDef Inputs

SetDef Outputs

150C 1.5 24-48* 12-24* 8-16* 32-64* Up to 8* Up to 4*

250C 2.5 48 24 16 64 Up to 8 Up to 4

250 2.5 48-96* 24-48* 16-32* 64-128* Up to 16* Up to 8*

350 3.5 72-96* 36-48* 24-32* 96-128* Up to 16* Up to 8*

450 4.5 96 48 32 128 Up to 16 Up to 8

* With optional I/O expansion.

Video Standards

HD Mode:1080i 25/29.97/30•1080pSF 23.976/24/25/29.97/30•720p 50/59.94/60•

SD Mode:525i 59.94•625i 50•

Power

Video Processing Frame 4 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 400W•Leakage current: <2.5 mA•

Video Processing Frame 8 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 800W •(1000W with EDPM)Leakage current: <2.5 mA•

Panel Control Unit (PCU) 3 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 500W•Leakage current: <2.5 mA•

Communications

Connections:Panel to PCU: Custom multi-pin cable. •15m/49 ft. max. lengthPCU to frame: 100Base-T, 1000Base-T •compatible. Category 5 cable, 8 conductor twisted pair. 100m/328 ft. max. length

Interoperability:The Kayenne Video Production Center is fully interoperable with the Encore™, Jupiter™, and SMS-7000 routing control systems and with the K2 server family (including the new K2 Summit™ SD/HD Live Production Server), legacy Profile® servers, M-Series™ iVDRs, and Turbo™ iDDRs. The Kayenne Video Production Center supports Ethernet and serial AMP protocol (standard in all systems), BVW and Odetics protocols, as well as controlling devices using PBusII and GPIs.

Environmental Conditions

Storage temperature: -20 to 70ºC (-4 •to 158ºF)Operating temperature: 0 to 40ºC (32 •to 104ºF)Relative humidity: 0-95% (non-•condensing)Electromagnetic environment: E2 •(according to EN55103-1, -2)

Mechanical specifications

Component Depth Width Height Weight Rack Units

Control Panels Flat Support Structure Orientation

KAYN-PNL-100-15* 356.4 mm (14.03 in.) 758.3 mm (29.85 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-200-25 488.4 mm (19.23 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) 29.9 kg (65.8 lbs.) n/a

KAYN-PNL-200-35 488.4 mm (19.23 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-300-25 637.1 mm (25.08 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-300-35 637.1 mm (25.08 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) 44.7 kg (98.4 lbs.) n/a

KAYN-PNL-400-25 746.3 mm (29.38 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-400-35 746.3 mm (29.38 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) 57.3 kg (126.2 lbs.) n/a

KAYN-PNL-AUX-25 185.7 mm (7.31 in.) 621.7 mm (24.48 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-AUX-35 185.7 mm (7.31 in.) 813.7 mm (32.04 in.) 84.3 mm (3.32 in.) 6.3 kg (13.8 lbs.) n/a

KAYN-PNL-MENU 91.7 mm (3.61 in.) 417.85 mm (16.45 in.) 270.10 mm (10.63 in.) 4.49 kg (9.9 lbs.) n/a

Frames

KAYN-FRM-250C 546.10 mm (21.5 in.) 482.60 mm (19 in.) 177.80 mm (7 in.) 17.69 kg (39 lbs.) 4

KAYN-FRM-450 522.73 mm (20.58 in.) 482.60 mm (19 in.) 441.96 mm (17.4 in.) 30.39 kg (67 lbs.) 8

PCU

KAYN-PNL-PCU 588.52 mm (23.17 in.) 482.60 mm (19 in.) 132.59 mm (5.22 in) 16.06 kg (35.4 lbs.) 3

*w/o Local Aux module.

speciFicaTions

Kayenne 4 M/E Panel

Panel Control Unit

product data sheetproduct data sheet

www.grassvalley.com

With the Kayenne switcher, Grass Valley is introducing a Device Control Module (DCM) that supports full-motion control (including jog wheel) for up to 32 devices such as DDRs/VTRs. Another new introduction is Q-MEM, a library of device cues independent of E-MEM, which operate in conjunction with the DCM and the up to six Device Control Windows on the system bar.

The new Kayenne menu system also leads the industry with a simplified navigation so that no menu is more than two levels down. Each menu is assisted by favorites, history, and semi-transparent pull-down quick-links.

Panel Control Units

The Kayenne switcher’s control panels run silently with no fan noise as their CPUs are located remotely in a 3 RU panel control unit (PCU).

Each PCU supports one or two control surfaces, either in the same or different logical suites. A control surface typically

consists of M/E stripes, a local aux stripe, plus a touchscreen menu panel with five knobs. This may be augmented with satellite panels consisting of one or two modules. Each PCU has eight ports that connect to panel stripes or satellite panels. The PCU can be mounted up to 15 meters from the main panel.

Powerful Video Processing

The first production switcher to have six keyers in every M/E, Kayenne is also the first production switcher to include an extra half-M/E in every model, providing cut/mix transitions and six linear/luminance keys. This half-M/E can be used as PGM/PST or as any other logical M/E. Each full M/E can have up to four channels of iDPM.

FlexiKey, DoubleTake, and split layered modes are included as standard for all M/Es (including the half-M/E). Control is enhanced on the panel by dedicated primary and secondary partition buttons and the use of a split lever arm on transition modules.

An optional eDPM for 8 RU frames provides an additional four video/key channels of eDPM with primary and secondary combiner outputs. The eDPM acts as an HD Kaleidoscope/DVEous replacement with its own independent E-MEMs.

The Kayenne Video Production Center supports input conversion (MatchDef) and output conversion (SetDef). These converters are not simple scalars but do full up/down/cross conversion with color space conversion and motion adaptation. Using MatchDef, converted inputs are available on all buses, including aux buses. SetDef does not consume any M/E resources—so, for example, when making a 1080i production, it is easy to also provide 720p and SD outputs.

KaYenne FeaTUres in depTh

Source Rules links keyers with sources to automatically •turn keys on or off on PGM and PST busses when the source is selected

Six-channel Image Store with approx. one minute of HD •storage and KacheBack technology for fast archive/restore

999 macros with many new ways to recall macros from the •panel

1,000 E-MEM registers with Define E-MEM for fine control •in creation and editing of effects

RGB color correction on M/E busses and aux bus outputs •

System bar on panel with up to six device control windows, •switched preview selection, and macro learn/assign

Optional panel Device Control Module replaces external •Lance or DNF boxes in most situations, with Q-MEM cue library for server/VTR content and integrated machine control

Frames have hot-swappable, front removable modules and •power supplies

Low power consumption •

Modular panel with hot-swappable modules•

KaYenne video prodUcTion cenTer sYsTeM seT-Up opTions

Optional Satellite Panel with Device Control Module

Kayenne Panel Control UnitKayenne 8 RU

Video Processing Frame

Kayenne Menu Panel

Optional KayenneMenu Panel

Optional Remote Aux Panel

Standard 4 M/E Panel

Optional 1 M/E Panel Optional Device Control Module

KAYN-PNL-300

3 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Three 25- or 35-button source select •modules One 25- or 35-button local aux module•Three local E-MEM modules •One master E-MEM module•Three transition modules •One multifunction module•System bar•Manual set •Cables•One option slot (DCM shown)•

KAYN-PNL-400

4 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Four 25- or 35-button source select •modulesOne 25- or 35-button local aux module•Four local E-MEM modules •One master E-MEM module•Four transition modules •One multifunction module •System bar•Manual set •Cables•Two option slots (one DCM shown)•

KAYN-PNL-100

1 M/E panel with 15-button source •selectorsPanel Control Unit•15:9 touch screen menu panel•One 15-button source select module •One local E-MEM module•One master E-MEM module •One transition module•One multifunction module •System bar•Manual set •Cables•

KAYN-PNL-200

2 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Two 25- or 35-button source select •modules One 25- or 35-button local aux module•Two local E-MEM modules•One master E-MEM module•Two transition modules•One multifunction module•System bar•Manual set •Cables•

Standard 1-ME 15KAYN-PNL-100

Standard 2-ME 25 KAYN-PNL-200

ordering inForMaTion

Standard 4-ME 35 KAYN-PNL-400

KAYN-PNL-300

35-Button Source Select Module

KAYN-FRM-EDPMFour video and key channel expansion digital picture manipulator module and software license. Not for the 4 RU frame. Includes Kurl and Spektra.

KAYN-FRM-IMG-44 GB image store module with license for six channels with standard RAM capacity 850 frames/1080i or 1900 frames/720p.

KAYN-FRM-IMG-UPG4 GB upgrade to image store cache option, doubling the RAM capacity to 8 GB.

KAYN-FRM-IOXPNDInput/output expander module, adding 24 inputs, 12 outputs, eight GPI inputs, 32 GPI output/tally relay closures, optional four MatchDef inputs. One per empty M/E slot.

KAYN-LIC-CHROxxxLicense enabling two or all chroma keyers in the system.

KAYN-LIC-IDPM-xxxLicense enabling two, four, or all floating iDPM video and key channels. Includes Kurl and Spektra.

KAYN-LIC-MATCHDEFLicense for MatchDef dual video source format converter for matching two SD or HD sources to the production format, maximum of eight for up to 16 sources.

KAYN-LIC-NETCENLicense enabling NetCentral™ SNMP agent for system health monitoring over Ethernet.

KAYN-LIC-RGBLicense for RGB color correction on all outputs. Thirty-two RGB color correctors on full M/E busses, eight per M/E, and on all aux outputs.

KAYN-LIC-SETDEFLicense enabling SetDef dual video source format converters for converting two outputs from the production format to another HD or SD format, both outputs of the same format, different aspect ratio settings allowed.

KAYN-PNL-OPT-DCMDevice control module option for an option slot in the main panel, or in a satellite panel enclosure, or as a spare. Used for controlling various image record and playback devices with full-motion control features and a jog knob.

KAYN-PNL-SAT-1Single module satellite panel enclosure for remote mounting a panel module separate from the main panel up to 15 meters from the panel control unit.

KAYN-PNL-SAT-2Dual module satellite panel enclosure for remote mounting two panel modules separate from the main panel up to 15 meters from the panel control unit.

KAYN-PNL-MENUTouchscreen menu panel and cable, as additional menu connected to second CPU (requires KAYN-PNL-CPU2), or standalone connected to customer furnished PC, or as a spare.

KAYN-PNL-CPU2CPU module for connecting a second menu panel to one panel control unit.

KAYN-PAK1Option package including four floating iDPM channels, 8 GB image store, two channels of MatchDef input conversion, two channels of SetDef output scaling, redundant PSU for frame.

KAYN-PAK2Option package for 8 RU frames including machine control module with jogwheel, four v/k channels of eDPM, two floating iDPM channels, 8 GB image store, two channels of MatchDef input conversion, two channels of SetDef output scaling, redundant PSU for frame.

KAYN-PAK3Option package for 8 RU frames including, four v/k channels of eDPM, four floating iDPM channels, 8 GB image store, two floating chroma keys, redundant PSU for frame.

KaYenne opTions

Please contact your authorized Grass Valley representative for a full list of available options. Local and regional sales contacts can be found by visiting www.grassvalley.com/sales

Master E-MEM Module

Local E-MEM Module

Transition ModuleMultifunction Module

Device Control Module

product data sheetproduct data sheet

www.grassvalley.com

With the Kayenne switcher, Grass Valley is introducing a Device Control Module (DCM) that supports full-motion control (including jog wheel) for up to 32 devices such as DDRs/VTRs. Another new introduction is Q-MEM, a library of device cues independent of E-MEM, which operate in conjunction with the DCM and the up to six Device Control Windows on the system bar.

The new Kayenne menu system also leads the industry with a simplified navigation so that no menu is more than two levels down. Each menu is assisted by favorites, history, and semi-transparent pull-down quick-links.

Panel Control Units

The Kayenne switcher’s control panels run silently with no fan noise as their CPUs are located remotely in a 3 RU panel control unit (PCU).

Each PCU supports one or two control surfaces, either in the same or different logical suites. A control surface typically

consists of M/E stripes, a local aux stripe, plus a touchscreen menu panel with five knobs. This may be augmented with satellite panels consisting of one or two modules. Each PCU has eight ports that connect to panel stripes or satellite panels. The PCU can be mounted up to 15 meters from the main panel.

Powerful Video Processing

The first production switcher to have six keyers in every M/E, Kayenne is also the first production switcher to include an extra half-M/E in every model, providing cut/mix transitions and six linear/luminance keys. This half-M/E can be used as PGM/PST or as any other logical M/E. Each full M/E can have up to four channels of iDPM.

FlexiKey, DoubleTake, and split layered modes are included as standard for all M/Es (including the half-M/E). Control is enhanced on the panel by dedicated primary and secondary partition buttons and the use of a split lever arm on transition modules.

An optional eDPM for 8 RU frames provides an additional four video/key channels of eDPM with primary and secondary combiner outputs. The eDPM acts as an HD Kaleidoscope/DVEous replacement with its own independent E-MEMs.

The Kayenne Video Production Center supports input conversion (MatchDef) and output conversion (SetDef). These converters are not simple scalars but do full up/down/cross conversion with color space conversion and motion adaptation. Using MatchDef, converted inputs are available on all buses, including aux buses. SetDef does not consume any M/E resources—so, for example, when making a 1080i production, it is easy to also provide 720p and SD outputs.

KaYenne FeaTUres in depTh

Source Rules links keyers with sources to automatically •turn keys on or off on PGM and PST busses when the source is selected

Six-channel Image Store with approx. one minute of HD •storage and KacheBack technology for fast archive/restore

999 macros with many new ways to recall macros from the •panel

1,000 E-MEM registers with Define E-MEM for fine control •in creation and editing of effects

RGB color correction on M/E busses and aux bus outputs •

System bar on panel with up to six device control windows, •switched preview selection, and macro learn/assign

Optional panel Device Control Module replaces external •Lance or DNF boxes in most situations, with Q-MEM cue library for server/VTR content and integrated machine control

Frames have hot-swappable, front removable modules and •power supplies

Low power consumption •

Modular panel with hot-swappable modules•

KaYenne video prodUcTion cenTer sYsTeM seT-Up opTions

Optional Satellite Panel with Device Control Module

Kayenne Panel Control UnitKayenne 8 RU

Video Processing Frame

Kayenne Menu Panel

Optional KayenneMenu Panel

Optional Remote Aux Panel

Standard 4 M/E Panel

Optional 1 M/E Panel Optional Device Control Module

KAYN-PNL-300

3 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Three 25- or 35-button source select •modules One 25- or 35-button local aux module•Three local E-MEM modules •One master E-MEM module•Three transition modules •One multifunction module•System bar•Manual set •Cables•One option slot (DCM shown)•

KAYN-PNL-400

4 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Four 25- or 35-button source select •modulesOne 25- or 35-button local aux module•Four local E-MEM modules •One master E-MEM module•Four transition modules •One multifunction module •System bar•Manual set •Cables•Two option slots (one DCM shown)•

KAYN-PNL-100

1 M/E panel with 15-button source •selectorsPanel Control Unit•15:9 touch screen menu panel•One 15-button source select module •One local E-MEM module•One master E-MEM module •One transition module•One multifunction module •System bar•Manual set •Cables•

KAYN-PNL-200

2 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Two 25- or 35-button source select •modules One 25- or 35-button local aux module•Two local E-MEM modules•One master E-MEM module•Two transition modules•One multifunction module•System bar•Manual set •Cables•

Standard 1-ME 15KAYN-PNL-100

Standard 2-ME 25 KAYN-PNL-200

ordering inForMaTion

Standard 4-ME 35 KAYN-PNL-400

KAYN-PNL-300

35-Button Source Select Module

KAYN-FRM-EDPMFour video and key channel expansion digital picture manipulator module and software license. Not for the 4 RU frame. Includes Kurl and Spektra.

KAYN-FRM-IMG-44 GB image store module with license for six channels with standard RAM capacity 850 frames/1080i or 1900 frames/720p.

KAYN-FRM-IMG-UPG4 GB upgrade to image store cache option, doubling the RAM capacity to 8 GB.

KAYN-FRM-IOXPNDInput/output expander module, adding 24 inputs, 12 outputs, eight GPI inputs, 32 GPI output/tally relay closures, optional four MatchDef inputs. One per empty M/E slot.

KAYN-LIC-CHROxxxLicense enabling two or all chroma keyers in the system.

KAYN-LIC-IDPM-xxxLicense enabling two, four, or all floating iDPM video and key channels. Includes Kurl and Spektra.

KAYN-LIC-MATCHDEFLicense for MatchDef dual video source format converter for matching two SD or HD sources to the production format, maximum of eight for up to 16 sources.

KAYN-LIC-NETCENLicense enabling NetCentral™ SNMP agent for system health monitoring over Ethernet.

KAYN-LIC-RGBLicense for RGB color correction on all outputs. Thirty-two RGB color correctors on full M/E busses, eight per M/E, and on all aux outputs.

KAYN-LIC-SETDEFLicense enabling SetDef dual video source format converters for converting two outputs from the production format to another HD or SD format, both outputs of the same format, different aspect ratio settings allowed.

KAYN-PNL-OPT-DCMDevice control module option for an option slot in the main panel, or in a satellite panel enclosure, or as a spare. Used for controlling various image record and playback devices with full-motion control features and a jog knob.

KAYN-PNL-SAT-1Single module satellite panel enclosure for remote mounting a panel module separate from the main panel up to 15 meters from the panel control unit.

KAYN-PNL-SAT-2Dual module satellite panel enclosure for remote mounting two panel modules separate from the main panel up to 15 meters from the panel control unit.

KAYN-PNL-MENUTouchscreen menu panel and cable, as additional menu connected to second CPU (requires KAYN-PNL-CPU2), or standalone connected to customer furnished PC, or as a spare.

KAYN-PNL-CPU2CPU module for connecting a second menu panel to one panel control unit.

KAYN-PAK1Option package including four floating iDPM channels, 8 GB image store, two channels of MatchDef input conversion, two channels of SetDef output scaling, redundant PSU for frame.

KAYN-PAK2Option package for 8 RU frames including machine control module with jogwheel, four v/k channels of eDPM, two floating iDPM channels, 8 GB image store, two channels of MatchDef input conversion, two channels of SetDef output scaling, redundant PSU for frame.

KAYN-PAK3Option package for 8 RU frames including, four v/k channels of eDPM, four floating iDPM channels, 8 GB image store, two floating chroma keys, redundant PSU for frame.

KaYenne opTions

Please contact your authorized Grass Valley representative for a full list of available options. Local and regional sales contacts can be found by visiting www.grassvalley.com/sales

Master E-MEM Module

Local E-MEM Module

Transition ModuleMultifunction Module

Device Control Module

product data sheetproduct data sheet

www.grassvalley.com

With the Kayenne switcher, Grass Valley is introducing a Device Control Module (DCM) that supports full-motion control (including jog wheel) for up to 32 devices such as DDRs/VTRs. Another new introduction is Q-MEM, a library of device cues independent of E-MEM, which operate in conjunction with the DCM and the up to six Device Control Windows on the system bar.

The new Kayenne menu system also leads the industry with a simplified navigation so that no menu is more than two levels down. Each menu is assisted by favorites, history, and semi-transparent pull-down quick-links.

Panel Control Units

The Kayenne switcher’s control panels run silently with no fan noise as their CPUs are located remotely in a 3 RU panel control unit (PCU).

Each PCU supports one or two control surfaces, either in the same or different logical suites. A control surface typically

consists of M/E stripes, a local aux stripe, plus a touchscreen menu panel with five knobs. This may be augmented with satellite panels consisting of one or two modules. Each PCU has eight ports that connect to panel stripes or satellite panels. The PCU can be mounted up to 15 meters from the main panel.

Powerful Video Processing

The first production switcher to have six keyers in every M/E, Kayenne is also the first production switcher to include an extra half-M/E in every model, providing cut/mix transitions and six linear/luminance keys. This half-M/E can be used as PGM/PST or as any other logical M/E. Each full M/E can have up to four channels of iDPM.

FlexiKey, DoubleTake, and split layered modes are included as standard for all M/Es (including the half-M/E). Control is enhanced on the panel by dedicated primary and secondary partition buttons and the use of a split lever arm on transition modules.

An optional eDPM for 8 RU frames provides an additional four video/key channels of eDPM with primary and secondary combiner outputs. The eDPM acts as an HD Kaleidoscope/DVEous replacement with its own independent E-MEMs.

The Kayenne Video Production Center supports input conversion (MatchDef) and output conversion (SetDef). These converters are not simple scalars but do full up/down/cross conversion with color space conversion and motion adaptation. Using MatchDef, converted inputs are available on all buses, including aux buses. SetDef does not consume any M/E resources—so, for example, when making a 1080i production, it is easy to also provide 720p and SD outputs.

KaYenne FeaTUres in depTh

Source Rules links keyers with sources to automatically •turn keys on or off on PGM and PST busses when the source is selected

Six-channel Image Store with approx. one minute of HD •storage and KacheBack technology for fast archive/restore

999 macros with many new ways to recall macros from the •panel

1,000 E-MEM registers with Define E-MEM for fine control •in creation and editing of effects

RGB color correction on M/E busses and aux bus outputs •

System bar on panel with up to six device control windows, •switched preview selection, and macro learn/assign

Optional panel Device Control Module replaces external •Lance or DNF boxes in most situations, with Q-MEM cue library for server/VTR content and integrated machine control

Frames have hot-swappable, front removable modules and •power supplies

Low power consumption •

Modular panel with hot-swappable modules•

KaYenne video prodUcTion cenTer sYsTeM seT-Up opTions

Optional Satellite Panel with Device Control Module

Kayenne Panel Control UnitKayenne 8 RU

Video Processing Frame

Kayenne Menu Panel

Optional KayenneMenu Panel

Optional Remote Aux Panel

Standard 4 M/E Panel

Optional 1 M/E Panel Optional Device Control Module

KAYN-PNL-300

3 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Three 25- or 35-button source select •modules One 25- or 35-button local aux module•Three local E-MEM modules •One master E-MEM module•Three transition modules •One multifunction module•System bar•Manual set •Cables•One option slot (DCM shown)•

KAYN-PNL-400

4 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Four 25- or 35-button source select •modulesOne 25- or 35-button local aux module•Four local E-MEM modules •One master E-MEM module•Four transition modules •One multifunction module •System bar•Manual set •Cables•Two option slots (one DCM shown)•

KAYN-PNL-100

1 M/E panel with 15-button source •selectorsPanel Control Unit•15:9 touch screen menu panel•One 15-button source select module •One local E-MEM module•One master E-MEM module •One transition module•One multifunction module •System bar•Manual set •Cables•

KAYN-PNL-200

2 M/E panel with 25- or 35-button •source selectorsPanel control unit•15:9 touch screen menu panel•Two 25- or 35-button source select •modules One 25- or 35-button local aux module•Two local E-MEM modules•One master E-MEM module•Two transition modules•One multifunction module•System bar•Manual set •Cables•

Standard 1-ME 15KAYN-PNL-100

Standard 2-ME 25 KAYN-PNL-200

ordering inForMaTion

Standard 4-ME 35 KAYN-PNL-400

KAYN-PNL-300

35-Button Source Select Module

KAYN-FRM-EDPMFour video and key channel expansion digital picture manipulator module and software license. Not for the 4 RU frame. Includes Kurl and Spektra.

KAYN-FRM-IMG-44 GB image store module with license for six channels with standard RAM capacity 850 frames/1080i or 1900 frames/720p.

KAYN-FRM-IMG-UPG4 GB upgrade to image store cache option, doubling the RAM capacity to 8 GB.

KAYN-FRM-IOXPNDInput/output expander module, adding 24 inputs, 12 outputs, eight GPI inputs, 32 GPI output/tally relay closures, optional four MatchDef inputs. One per empty M/E slot.

KAYN-LIC-CHROxxxLicense enabling two or all chroma keyers in the system.

KAYN-LIC-IDPM-xxxLicense enabling two, four, or all floating iDPM video and key channels. Includes Kurl and Spektra.

KAYN-LIC-MATCHDEFLicense for MatchDef dual video source format converter for matching two SD or HD sources to the production format, maximum of eight for up to 16 sources.

KAYN-LIC-NETCENLicense enabling NetCentral™ SNMP agent for system health monitoring over Ethernet.

KAYN-LIC-RGBLicense for RGB color correction on all outputs. Thirty-two RGB color correctors on full M/E busses, eight per M/E, and on all aux outputs.

KAYN-LIC-SETDEFLicense enabling SetDef dual video source format converters for converting two outputs from the production format to another HD or SD format, both outputs of the same format, different aspect ratio settings allowed.

KAYN-PNL-OPT-DCMDevice control module option for an option slot in the main panel, or in a satellite panel enclosure, or as a spare. Used for controlling various image record and playback devices with full-motion control features and a jog knob.

KAYN-PNL-SAT-1Single module satellite panel enclosure for remote mounting a panel module separate from the main panel up to 15 meters from the panel control unit.

KAYN-PNL-SAT-2Dual module satellite panel enclosure for remote mounting two panel modules separate from the main panel up to 15 meters from the panel control unit.

KAYN-PNL-MENUTouchscreen menu panel and cable, as additional menu connected to second CPU (requires KAYN-PNL-CPU2), or standalone connected to customer furnished PC, or as a spare.

KAYN-PNL-CPU2CPU module for connecting a second menu panel to one panel control unit.

KAYN-PAK1Option package including four floating iDPM channels, 8 GB image store, two channels of MatchDef input conversion, two channels of SetDef output scaling, redundant PSU for frame.

KAYN-PAK2Option package for 8 RU frames including machine control module with jogwheel, four v/k channels of eDPM, two floating iDPM channels, 8 GB image store, two channels of MatchDef input conversion, two channels of SetDef output scaling, redundant PSU for frame.

KAYN-PAK3Option package for 8 RU frames including, four v/k channels of eDPM, four floating iDPM channels, 8 GB image store, two floating chroma keys, redundant PSU for frame.

KaYenne opTions

Please contact your authorized Grass Valley representative for a full list of available options. Local and regional sales contacts can be found by visiting www.grassvalley.com/sales

Master E-MEM Module

Local E-MEM Module

Transition ModuleMultifunction Module

Device Control Module

Financing is available through Thomson financial services. Please contact your products representative for more details.

FinancingproFessional services

product data sheet

Our professional services offerings ensure optimal system performance and maximize uptime. These services include call centers staffed around the clock; system planning, design, and commissioning; professional training courses; and technical maintenance programs and service agreements.

www.grassvalley.com/support

www.grassvalley.com

product data sheet

© Copyright 2009 Thomson. All rights reserved. Printed in USA. Profile is a registered trademark and Grass Valley, FlexiKey, DoubleTake, Encore, Jupiter, K2 Summit, Kalypso, Kayenne, Kurl, M-Series, NetCentral, and Turbo are trademarks of Grass Valley, Inc. All other tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies. Specifications subject to change without notice. SWT-3025D

KeY FeaTUres

Fully digital 10-bit 4:2:2 video switcher •with up to 96 inputs and 48 outputs

HD/SD SDI with optional up/down/ •cross converters on selected inputs and outputs

1.5 to 4.5 M/Es •

Half-M/E included in every system •with cut/mix transitions and six linear/luminance keyers

Six keyers in every full M/E: four •full-function keyers plus two linear/ luminance keyers

Full-function keyers have masks, •preset pattern wipes, and optional chroma keyers, etc.

Each full-function keyer has two •pages (frames) of video and key storage to free up Image Store outputs

Four integrated DPMs (iDPMs) in each •M/E with Kurl™ and Spektra

Four independent channels of •eDPM with primary and secondary combiner outputs are available in the 8 RU frame

DoubleTake• ™ (split M/E mode) included as standard on all systems effectively increases the number of M/Es to a total of up to 10

FlexiKey• ™ (programmable clean feed mode) included as standard on all systems for separately programmable configurations of keyers from each M/E output

Any partition can be placed into •layered mode, providing composite video and key outputs

Split-lever arm control of primary and •secondary partitions

Aux bus transitions for dissolves and •wipes on aux bus outputs

Automatic insertion of video in pillars •for 4:3 content into 16:9 production

The Kayenne™ Video Production Center is a new family of production switchers (video mixers) from Grass Valley™.

All Kayenne frames include a half-M/E and scale from 1.5 to 2.5 M/Es in compact (4 RU) frames and from 2.5 to 4.5 M/Es in standard (8 RU) frames. The frame has up to 96 inputs and 48 outputs.

To meet ever-increasing production needs, Kayenne provides the most video processing power available. Each M/E has six keyers. A 4.5 M/E system has up to 30 keyers and 20 DPM channels.

The Kayenne family has a range of state-of-the-art modular control panels scaling from 1 to 4 M/E stripes, accompanied by a local aux panel and a 15:9 high-resolution touchscreen menu.

Kayenne’s panel and menu layout are immediately recognizable and operable for those familiar with Kalypso™ switchers. Additionally, Kayenne incorporates key features from the Kayak switcher family plus many new innovations. Once again, Grass Valley has taken the lead in switcher design by providing the industry with a switcher that is both best-of-breed and the most cost-effective.

Modular Control Panels

Each module of the Kayenne control panel snaps into an extruded aluminum tray, is easily removable, and is hot-swappable. This modularity provides multiple panel configurations ranging in depth from 1 to 4 M/E stripes and a width choice of 35, 25, or 15

(on selected models) source select buttons per row. The control panels are ergonomically designed and can be mounted flat or in a banked curve.

Each source select and aux bus module has two rows of OLED Source Name Displays that provide ultra-clear text and extremely wide viewing angles. All buttons are illuminated with a selection of RGB colors, which dynamically change to indicate context (M/E colors, key colors, source colors, and function colors). Many buttons also have programmable soft functions, which are indicated by a four-character LED display above them, such as those found on the innovative Multifunction Module. Transition Modules have Enhanced Status Displays using easy to read LEDs.

the most powerful video production switcher in the world.

KaYenneVideo production center

Touchscreen Menu Panel

8 RU Video Processing Frame

Frame Model M/Es Inputs Outputs GPI Inputs GPI/Tally Outputs

MatchDef Inputs

SetDef Outputs

150C 1.5 24-48* 12-24* 8-16* 32-64* Up to 8* Up to 4*

250C 2.5 48 24 16 64 Up to 8 Up to 4

250 2.5 48-96* 24-48* 16-32* 64-128* Up to 16* Up to 8*

350 3.5 72-96* 36-48* 24-32* 96-128* Up to 16* Up to 8*

450 4.5 96 48 32 128 Up to 16 Up to 8

* With optional I/O expansion.

Video Standards

HD Mode:1080i 25/29.97/30•1080pSF 23.976/24/25/29.97/30•720p 50/59.94/60•

SD Mode:525i 59.94•625i 50•

Power

Video Processing Frame 4 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 400W•Leakage current: <2.5 mA•

Video Processing Frame 8 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 800W •(1000W with EDPM)Leakage current: <2.5 mA•

Panel Control Unit (PCU) 3 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 500W•Leakage current: <2.5 mA•

Communications

Connections:Panel to PCU: Custom multi-pin cable. •15m/49 ft. max. lengthPCU to frame: 100Base-T, 1000Base-T •compatible. Category 5 cable, 8 conductor twisted pair. 100m/328 ft. max. length

Interoperability:The Kayenne Video Production Center is fully interoperable with the Encore™, Jupiter™, and SMS-7000 routing control systems and with the K2 server family (including the new K2 Summit™ SD/HD Live Production Server), legacy Profile® servers, M-Series™ iVDRs, and Turbo™ iDDRs. The Kayenne Video Production Center supports Ethernet and serial AMP protocol (standard in all systems), BVW and Odetics protocols, as well as controlling devices using PBusII and GPIs.

Environmental Conditions

Storage temperature: -20 to 70ºC (-4 •to 158ºF)Operating temperature: 0 to 40ºC (32 •to 104ºF)Relative humidity: 0-95% (non-•condensing)Electromagnetic environment: E2 •(according to EN55103-1, -2)

Mechanical specifications

Component Depth Width Height Weight Rack Units

Control Panels Flat Support Structure Orientation

KAYN-PNL-100-15* 356.4 mm (14.03 in.) 758.3 mm (29.85 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-200-25 488.4 mm (19.23 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) 29.9 kg (65.8 lbs.) n/a

KAYN-PNL-200-35 488.4 mm (19.23 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-300-25 637.1 mm (25.08 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-300-35 637.1 mm (25.08 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) 44.7 kg (98.4 lbs.) n/a

KAYN-PNL-400-25 746.3 mm (29.38 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-400-35 746.3 mm (29.38 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) 57.3 kg (126.2 lbs.) n/a

KAYN-PNL-AUX-25 185.7 mm (7.31 in.) 621.7 mm (24.48 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-AUX-35 185.7 mm (7.31 in.) 813.7 mm (32.04 in.) 84.3 mm (3.32 in.) 6.3 kg (13.8 lbs.) n/a

KAYN-PNL-MENU 91.7 mm (3.61 in.) 417.85 mm (16.45 in.) 270.10 mm (10.63 in.) 4.49 kg (9.9 lbs.) n/a

Frames

KAYN-FRM-250C 546.10 mm (21.5 in.) 482.60 mm (19 in.) 177.80 mm (7 in.) 17.69 kg (39 lbs.) 4

KAYN-FRM-450 522.73 mm (20.58 in.) 482.60 mm (19 in.) 441.96 mm (17.4 in.) 30.39 kg (67 lbs.) 8

PCU

KAYN-PNL-PCU 588.52 mm (23.17 in.) 482.60 mm (19 in.) 132.59 mm (5.22 in) 16.06 kg (35.4 lbs.) 3

*w/o Local Aux module.

speciFicaTions

Kayenne 4 M/E Panel

Panel Control Unit

Financing is available through Thomson financial services. Please contact your products representative for more details.

FinancingproFessional services

product data sheet

Our professional services offerings ensure optimal system performance and maximize uptime. These services include call centers staffed around the clock; system planning, design, and commissioning; professional training courses; and technical maintenance programs and service agreements.

www.grassvalley.com/support

www.grassvalley.com

product data sheet

© Copyright 2009 Thomson. All rights reserved. Printed in USA. Profile is a registered trademark and Grass Valley, FlexiKey, DoubleTake, Encore, Jupiter, K2 Summit, Kalypso, Kayenne, Kurl, M-Series, NetCentral, and Turbo are trademarks of Grass Valley, Inc. All other tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies. Specifications subject to change without notice. SWT-3025D

KeY FeaTUres

Fully digital 10-bit 4:2:2 video switcher •with up to 96 inputs and 48 outputs

HD/SD SDI with optional up/down/ •cross converters on selected inputs and outputs

1.5 to 4.5 M/Es •

Half-M/E included in every system •with cut/mix transitions and six linear/luminance keyers

Six keyers in every full M/E: four •full-function keyers plus two linear/ luminance keyers

Full-function keyers have masks, •preset pattern wipes, and optional chroma keyers, etc.

Each full-function keyer has two •pages (frames) of video and key storage to free up Image Store outputs

Four integrated DPMs (iDPMs) in each •M/E with Kurl™ and Spektra

Four independent channels of •eDPM with primary and secondary combiner outputs are available in the 8 RU frame

DoubleTake• ™ (split M/E mode) included as standard on all systems effectively increases the number of M/Es to a total of up to 10

FlexiKey• ™ (programmable clean feed mode) included as standard on all systems for separately programmable configurations of keyers from each M/E output

Any partition can be placed into •layered mode, providing composite video and key outputs

Split-lever arm control of primary and •secondary partitions

Aux bus transitions for dissolves and •wipes on aux bus outputs

Automatic insertion of video in pillars •for 4:3 content into 16:9 production

The Kayenne™ Video Production Center is a new family of production switchers (video mixers) from Grass Valley™.

All Kayenne frames include a half-M/E and scale from 1.5 to 2.5 M/Es in compact (4 RU) frames and from 2.5 to 4.5 M/Es in standard (8 RU) frames. The frame has up to 96 inputs and 48 outputs.

To meet ever-increasing production needs, Kayenne provides the most video processing power available. Each M/E has six keyers. A 4.5 M/E system has up to 30 keyers and 20 DPM channels.

The Kayenne family has a range of state-of-the-art modular control panels scaling from 1 to 4 M/E stripes, accompanied by a local aux panel and a 15:9 high-resolution touchscreen menu.

Kayenne’s panel and menu layout are immediately recognizable and operable for those familiar with Kalypso™ switchers. Additionally, Kayenne incorporates key features from the Kayak switcher family plus many new innovations. Once again, Grass Valley has taken the lead in switcher design by providing the industry with a switcher that is both best-of-breed and the most cost-effective.

Modular Control Panels

Each module of the Kayenne control panel snaps into an extruded aluminum tray, is easily removable, and is hot-swappable. This modularity provides multiple panel configurations ranging in depth from 1 to 4 M/E stripes and a width choice of 35, 25, or 15

(on selected models) source select buttons per row. The control panels are ergonomically designed and can be mounted flat or in a banked curve.

Each source select and aux bus module has two rows of OLED Source Name Displays that provide ultra-clear text and extremely wide viewing angles. All buttons are illuminated with a selection of RGB colors, which dynamically change to indicate context (M/E colors, key colors, source colors, and function colors). Many buttons also have programmable soft functions, which are indicated by a four-character LED display above them, such as those found on the innovative Multifunction Module. Transition Modules have Enhanced Status Displays using easy to read LEDs.

the most powerful video production switcher in the world.

KaYenneVideo production center

Touchscreen Menu Panel

8 RU Video Processing Frame

Frame Model M/Es Inputs Outputs GPI Inputs GPI/Tally Outputs

MatchDef Inputs

SetDef Outputs

150C 1.5 24-48* 12-24* 8-16* 32-64* Up to 8* Up to 4*

250C 2.5 48 24 16 64 Up to 8 Up to 4

250 2.5 48-96* 24-48* 16-32* 64-128* Up to 16* Up to 8*

350 3.5 72-96* 36-48* 24-32* 96-128* Up to 16* Up to 8*

450 4.5 96 48 32 128 Up to 16 Up to 8

* With optional I/O expansion.

Video Standards

HD Mode:1080i 25/29.97/30•1080pSF 23.976/24/25/29.97/30•720p 50/59.94/60•

SD Mode:525i 59.94•625i 50•

Power

Video Processing Frame 4 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 400W•Leakage current: <2.5 mA•

Video Processing Frame 8 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 800W •(1000W with EDPM)Leakage current: <2.5 mA•

Panel Control Unit (PCU) 3 RU:Line voltage: 100V-240 VAC ±10% •autorange, power factor corrected. Automatic line-voltage sensing for 120V and 240V sourcesLine frequency: 50/60 Hz ±5%•Power consumption: Max. 500W•Leakage current: <2.5 mA•

Communications

Connections:Panel to PCU: Custom multi-pin cable. •15m/49 ft. max. lengthPCU to frame: 100Base-T, 1000Base-T •compatible. Category 5 cable, 8 conductor twisted pair. 100m/328 ft. max. length

Interoperability:The Kayenne Video Production Center is fully interoperable with the Encore™, Jupiter™, and SMS-7000 routing control systems and with the K2 server family (including the new K2 Summit™ SD/HD Live Production Server), legacy Profile® servers, M-Series™ iVDRs, and Turbo™ iDDRs. The Kayenne Video Production Center supports Ethernet and serial AMP protocol (standard in all systems), BVW and Odetics protocols, as well as controlling devices using PBusII and GPIs.

Environmental Conditions

Storage temperature: -20 to 70ºC (-4 •to 158ºF)Operating temperature: 0 to 40ºC (32 •to 104ºF)Relative humidity: 0-95% (non-•condensing)Electromagnetic environment: E2 •(according to EN55103-1, -2)

Mechanical specifications

Component Depth Width Height Weight Rack Units

Control Panels Flat Support Structure Orientation

KAYN-PNL-100-15* 356.4 mm (14.03 in.) 758.3 mm (29.85 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-200-25 488.4 mm (19.23 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) 29.9 kg (65.8 lbs.) n/a

KAYN-PNL-200-35 488.4 mm (19.23 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-300-25 637.1 mm (25.08 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-300-35 637.1 mm (25.08 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) 44.7 kg (98.4 lbs.) n/a

KAYN-PNL-400-25 746.3 mm (29.38 in.) 1341.7 mm (52.82 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-400-35 746.3 mm (29.38 in.) 1533.7 mm (60.38 in.) 84.3 mm (3.32 in.) 57.3 kg (126.2 lbs.) n/a

KAYN-PNL-AUX-25 185.7 mm (7.31 in.) 621.7 mm (24.48 in.) 84.3 mm (3.32 in.) n/a

KAYN-PNL-AUX-35 185.7 mm (7.31 in.) 813.7 mm (32.04 in.) 84.3 mm (3.32 in.) 6.3 kg (13.8 lbs.) n/a

KAYN-PNL-MENU 91.7 mm (3.61 in.) 417.85 mm (16.45 in.) 270.10 mm (10.63 in.) 4.49 kg (9.9 lbs.) n/a

Frames

KAYN-FRM-250C 546.10 mm (21.5 in.) 482.60 mm (19 in.) 177.80 mm (7 in.) 17.69 kg (39 lbs.) 4

KAYN-FRM-450 522.73 mm (20.58 in.) 482.60 mm (19 in.) 441.96 mm (17.4 in.) 30.39 kg (67 lbs.) 8

PCU

KAYN-PNL-PCU 588.52 mm (23.17 in.) 482.60 mm (19 in.) 132.59 mm (5.22 in) 16.06 kg (35.4 lbs.) 3

*w/o Local Aux module.

speciFicaTions

Kayenne 4 M/E Panel

Panel Control Unit