18
173 173 MultiTech Steel drawer system

KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

173173

MultiTechSteel drawer system

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 173

Page 2: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

Special drawer height for us under the hob.

Inside drawers – extremely practical behind front panels.

MultiTech

. . . an impressive product range with a price/performance ratio tailored to your customer base

A choice of intelligent accessoriesto enhance any MultiTech drawer

system and fit for your application– in kitchens or living areas.

Partial and full extension runners for up to 100 lbs K.C.M.A. total load – for smoothservice every day, year after year.

174 www.hettich.com

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 174

Page 3: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

Contemporary design with a generouschoice of five drawer heights, for theperfect storage solution.

Good looks, wide , choice , top quality

Technik für Möbel 175

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 175

Page 4: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

End-user benefits typical of up-market drawer systems

The free-spinning rollers are quiet,require no maintenance and run trueeven under heavy loads.

The self-closing feature closes front panels flush against the unit.The perfect parallel drawer actionallows elegant hairline reveals.

Full extension pan drawers open and close smoothly thanks to easyroller action.

Double-stop detent for safe routine handling. Can also be used to hold an open drawer securely in position.

High drawer sides forplenty of storage space

176 www.hettich.com

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 176

Page 5: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

MultiTech

. . . all the way to final assembly

Simple 3-dimensional front panel adjustment (± 2 mm cam height adjustment,

± 1,5 mm side adjustment, front panel angel via railing).Side panel leaves factory in zero position.

Fast front panel assembly using left/right-compatible front connectors(separate left/right connectors forinside pan drawers).

± 2 mm ± 1,5 mm

Drawers are easy to insert and remove.

± 2 mm ± 1,5 mmclick

177Technik für Möbel

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 177

Page 6: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

178 www.hettich.com

Industrial packing

Industrial packing

Drawer set contains:Drawer profile left/right �Drawer slide left/right �

MultiTech 54Steel profile system for variable drawer widthswith self closing

System benefits

• 2 1/8” (54 mm) height• Variable drawer width• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension• Load capacity 100 lbs K.C.M.A.

� Drawer profile� Drawer slide� Front connector right� Front connector left

� Drawer profilepowder-coated steel, white

Length Order no. PUinch/mm left right

10”/250 9 050 660 9 050 661 2514”/350 9 050 662 9 050 663 2516”/400 9 050 664 9 050 665 2518”/450 9 050 666 9 050 667 2520”/500 9 050 668 9 050 669 2522”/550 9 050 670 9 050 671 25

Article Order no. PU

Front connector, screw-on left 1 064 336 100Front connector, screw-on right 1 064 341 100

� Drawer slidepowder-coated steel, white

� Front connector, screw-onnickel-plated die cast zinc

Rear mounting bracket for face frame cabinetsplastic

Distributor packing

Length Order no. PUinch/mm left right

10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100

Drawer set, height 2 1/8” (54 mm), whitepartial extension

Article Order no. PU

Front connector, screw-on left / right 079 174 10 sets

Article Order no. PU

Front connector, knock-in left 1 064 578 100Front connector, knock-in right 1 064 579 100

� Front connector, knock-innickel-plated die cast zinc

Distributor packing

Article Order no. PU

Front connector, knock-in left / right 079 173 10 sets

Length Order no. PUinch/mm

10”/250 050 001 10 sets14”/350 050 003 10 sets16”/400 050 005 10 sets18”/450 050 007 10 sets20”/500 050 009 10 sets22”/550 050 011 10 sets

��

Article Order no. PU

Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600

Recommended screw no. 6

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 178

Page 7: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

179Technik für Möbel

Drawer front panel

32

Mounting example for partial extension

Front connector drilling position

Dimensions

12,5

7,5

8,5

32

ø10 ±0,1

ø10 ±0,1

Wooden back panel = inside cabinet width - 32

Bottom panel depth =nominal length - 3

Inside cabinet width

Bottom panelwidth = insidecabinet width - 32

Wooden back panel = 39

16 ±1 15

9

18,5

12

49

min. 24

min. 5

16

3954

64

Chipboard screw ø 3,5

Wooden back panel

Pan-head screwø 4,5 x 12

Pan-head screwø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Bottom panel width + 14

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 179

Page 8: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

180 www.hettich.com

Drawer set, height 33/8” (86 mm), white

Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,

only with full extension set

MultiTech 86Steel profile system for variable drawer widthswith self closing

System benefits

• 33/8” (86 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.

� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile

and pullout prevention

� Drawer profilepowder-coated steel, white

Length Order no. PUinch/mm left right

10”/250 9 050 619 9 050 620 2514”/350 9 050 623 9 050 624 2516”/400 9 050 627 9 050 628 2518”/450 9 050 631 9 050 632 2520”/500 9 050 635 9 050 636 2522”/550 9 050 639 9 050 640 25

Length Order no. PU Order no. PUinch/mm partial extension full extension

10”/250 050 013 10 sets –14”/350 050 015 10 sets –16”/400 050 017 10 sets 051 401 6 sets18”/450 050 019 10 sets 051 403 6 sets20”/500 050 021 10 sets 051 405 6 sets22”/550 050 023 10 sets 051 407 6 sets

� Drawer slide, partial extensionpowder-coated steel, white

� Front connector, screw-onnickel-plated steel

Distributor packing

Industrial packing

Industrial packing

Length Order no. PUinch/mm left right

10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100

Article Order no. PU

Front connector, screw-on left / right 054 997 20

Article Order no. PU

Front connector, screw-on left / right 9 052 273 200

� Front connector, knock-innickel-plated steel

Distributor packing

Article Order no. PU

Front connector, knock-in left / right 054 998 20

Article Order no. PU

Front connector, knock-in left / right 9052 275 200

Corner connector for internal drawerwhite plastic

Rear mounting bracket for face frame cabinetsplastic

Article Order no. PU

Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600

Recommended screw no. 6

Article Order no. PU

Corner connector for internal drawerleft / right 051 487 10 sets

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 180

Page 9: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

181Technik für Möbel

64

X

61

Bottom panelwidth = insidecabinet width - 32

Wooden back panel = 71

Wooden back panel =inside cabinet width - 32

Wooden front panel =inside cabinet width - 58

Bottom panel depth =nominal length - 19

71

Inside cabinet width

15

8671

16

18,5

32

min.5

81

min. 249

16±1

Chipboard screw ø 3,5

Pan-head screwø 4,5 x 12

Pan-head screwø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Woodenback panel

15

8671

16

18,5

32

min.5

49

9

16±1

min. 56

Chipboard screw ø 3,5

Pan-head screwø 4,5 x 12

Pan-head screwø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Woodenback panel

18 86

9

71

34,5

Partial extension Full extension

Countersunk screw ø 3,5

Mounting example for partial extension

Dimensions drawer

Mounting example for full extension

Mounting example for inside drawer

Bottom panel width = insidecabinet width - 32

Wooden back panel = 71

Wooden back panel = inside cabinet width - 32

Bottom panel depth= nominal length - 3

Inside cabinet width

Front connector drilling position

7,5

64

8,5

12,5

ø10±0,1

ø10±0,1

Dimensions inside drawer

64

Drawer front panel

Bottom panel width + 14

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 181

Page 10: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

182 www.hettich.com

Drawer set, height 4 5/8” (118 mm), white

Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,

only with full extension set

MultiTech 118Steel profile system for variable drawer widthswith self closing

System benefits

• 4 5/8” (118 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.

� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile

and pullout prevention

� Drawer profilepowder-coated steel, white

Length Order no. PUinch/mm left right

10”/250 9 050 750 9 050 739 2514”/350 9 050 754 9 050 753 2516”/400 9 050 760 9 050 759 2518”/450 9 050 764 9 050 763 2520”/500 9 050 768 9 050 767 2522”/550 9 050 770 9 050 769 25

Length Order no. PU Order no. PUinch/mm partial extension full extension

10”/250 050 033 10 sets –14”/350 050 035 10 sets –16”/400 050 037 10 sets 051 417 6 sets18”/450 050 039 10 sets 051 419 6 sets20”/500 050 041 10 sets 051 421 6 sets22”/550 050 043 10 sets 051 423 6 sets

� Drawer slide, partial extensionpowder-coated steel, white

� Front connector, screw-onnickel-plated steel

Length Order no. PUinch/mm left right

10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100

� Front connector, knock-innickel-plated steel

Distributor packing

Industrial packing

Industrial packing

Article Order no. PU

Front connector, screw-on left / right 054 997 20

Article Order no. PU

Front connector, screw-on left / right 9 052 273 200

Distributor packing

Article Order no. PU

Front connector, knock-in left / right 054 998 20

Article Order no. PU

Front connector, knock-in left / right 9052 275 200

Rear mounting bracket for face frame cabinetsplastic

Article Order no. PU

Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600

Recommended screw no. 6

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 182

Page 11: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

183Technik für Möbel

64

X

103

16

18,5

64

min.5

113

min. 249

1516±1

118

Chipboard screw ø 3,5

Pan-head screwø 4,5 x 12

Pan-head screwø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Woodenback panel

103

16

18,5

64

min.5

81

9

1516 ±1

118

min. 56

Chipboard screw ø 3,5

Pan-head screwø 4,5 x 12

Pan-head screwø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Woodenback panel

Mounting example for partial extension

DimensionsMounting example for full extension

Front connector drilling position

7,5

64

40,5

12,5

ø10 ±0,1

ø10 ±0,1

Wooden back panel = inside cabinet width - 32

Bottom panel depth= nominal length - 3

Inside cabinet width

Bottom panelwidth = insidecabinet width - 32

Wooden back panel = 103

64

Drawer front panel

Bottom panel width + 14

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 183

Page 12: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

184 www.hettich.com

Drawer set, height 6” (150 mm), white

Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,

only with full extension set

MultiTech 150Steel profile system for variable drawer widthswith self closing

System benefits

• 6” (150 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.

� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile

and pullout prevention

� Drawer profilepowder-coated steel, white

Length Order no. PUinch/mm left right

10”/250 9 050 709 9 050 710 2514”/350 9 050 711 9 050 712 2516”/400 9 050 713 9 050 714 2518”/450 9 050 715 9 050 716 2520”/500 9 050 717 9 050 718 2522”/550 9 050 719 9 050 720 25

Length Order no. PU Order no. PUinch/mm partial extension full extension

10”/250 050 053 10 sets –14”/350 050 055 10 sets –16”/400 050 057 10 sets 051 433 6 sets18”/450 050 059 10 sets 051 435 6 sets20”/500 050 061 10 sets 051 437 6 sets22”/550 050 063 10 sets 051 439 6 sets

� Drawer slide, partial extensionpowder-coated steel, white

� Front connector, screw-onnickel-plated steel

Length Order no. PUinch/mm left right

10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100

� Front connector, knock-innickel-plated steel

Distributor packing

Industrial packing

Industrial packing

Article Order no. PU

Front connector, screw-on left / right 054 997 20

Article Order no. PU

Front connector, screw-on left / right 9 052 273 200

Distributor packing

Article Order no. PU

Front connector, knock-in left / right 054 998 20

Article Order no. PU

Front connector, knock-in left / right 9052 275 200

Rear mounting bracket for face frame cabinetsplastic

Article Order no. PU

Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600

Recommended screw no. 6

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 184

Page 13: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

185Technik für Möbel

64

X

150135

16

min. 5

96

18,5

9

1516 ±1

min. 24

145

Chipboard screw ø 3,5

Pan-head screwø 4,5 x 12

Pan-head screw ø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Woodenback panel

150135

16

113

min. 5

96

18,5

9

1516 ±1

min. 56

Chipboard screw ø 3,5

Pan-head screw ø 4,5 x 12

Pan-head screw ø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Woodenback panel

Mounting example for partial extension

Dimensions Mounting example for full extension

Front connector drilling position

12,5

7,5

64

72,5

ø10 ±0,1

ø10 ±0,1

Wooden back panel = inside cabinet width - 32

Bottom panel depth= nominal length - 3

Inside cabinet width

Bottom panelwidth = insidecabinet width - 32

Wooden back panel= 135

64

Drawer front panel

Bottom panel width + 14

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 185

Page 14: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

186 www.hettich.com

Drawer set, height 8 3/8” (214 mm), white

Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,

only with full extension set

MultiTech 214Steel profile system for variable drawer widthswith self closing

System benefits

• 8 3/8” (214 mm) height• 4 lengths: 16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.

� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile

and pullout prevention

� Drawer profilepowder-coated steel, white

Length Order no. PUinch/mm left right

16”/400 9 054 921 9 054 922 1018”/450 9 054 923 9 054 926 1020”/500 9 054 927 9 054 928 10

Length Order no. PU Order no. PUinch/mm partial extension full extension

16”/400 051 449 10 sets 051 465 6 sets18”/450 051 451 10 sets 051 467 6 sets20”/500 051 453 10 sets 051 469 6 sets22”/550 051 455 10 sets 051 471 6 sets

� Drawer slide, partial extensionpowder-coated steel, white

� Front connector, screw-onnickel-plated steel

Length Order no. PUinch/mm left right

16”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 100

� Front connector, knock-innickel-plated steel

��

��

Distributor packing

Industrial packing

Industrial packing

Article Order no. PU

Front connector, screw-on left / right 054 997 20

Article Order no. PU

Front connector, screw-on left / right 9 052 273 200

Distributor packing

Article Order no. PU

Front connector, knock-in left / right 054 998 20

Article Order no. PU

Front connector, knock-in left / right 9052 275 200

Rear mounting bracket for face frame cabinetsplastic

Article Order no. PU

Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600

Recommended screw no. 6

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 186

Page 15: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

187Technik für Möbel

199

16

209

min. 5

160

18,5

9

1516 ±1

96

min. 24

Chipboard screw ø 3,5

Pan-head screwø 4,5 x 12

Pan-head screw ø 4,5 x 12

Inside cabinet width

Euro screw countersunk

214

199

16

177

min. 5

160

18,5

9

1516 ±1

min. 56

96

Chipboard screw ø 3,5

Pan-head screwø 4,5 x 12

Pan-head screw ø 4,5 x 12

Inside cabinet width

Euro screw countersunk

Mounting example for partial extension

Dimensions

Mounting example for full extension

Front connector drilling position

12,5

7,5

64

136,5

ø10 ±0,1

ø10 ±0,1

64

Wooden back panel = inside cabinet width - 32

Bottom panel depth= nominal length - 3

Inside cabinet width

Bottom panelwidth = insidecabinet width - 32

Wooden back panel= 199

64

Drawer front panel

Bottom panel width + 14

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 187

Page 16: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

188 www.hettich.com

MultiTechPot-and-pan drawerSteel profile system for variable drawer widths

Railing for pot-and-pan drawerwhite

Length Order no. PUinch/mm left right

18”/400 1 064 372 1 064 377 10020”/450 1 064 375 1 064 378 10022”/500 1 064 376 1 064 379 100

Front connector for railingpremounted knock-in screw,clear plastic

Article Order no. PU

Front connector for railing 1 061 965 400

System benefits

• 2 1/8” (54 mm), 3 3/8” (86 mm), 4 5/8” (118 mm), 6” (150 mm) or 8 3/8” (214 mm) drawers can be expanded to pot-and-pan drawers with a railing set

• Steel profile with roller runners as partial extension slide or full extension slide with self-closing feature

• Load capacity 100 lbs K.C.M.A.• 3 nominal drawer lengths: 18”/20”/22” (450/500/550 mm)• Finish: white• Variable pot-and-pan drawer widths• Quick drawer insertion and removal• Simple assembly and front panel adjustment• One-sided constrained guidance

The following components are all you need for assembling a MultiTech pot-and-pan drawer:

Distributor packing

• Drawer set, full extension slide orpartial extension slide+ Front connectors(see page 178 to 187)

• Railing set (see below)

Industrial packing� Drawer profile left / right� Drawer slide left / right� Front connector right� Front connector left� Railing for pot-and-pan drawer Front connector for railing

Industrial packing

Industrial packing

Railing-Set for pot-and-pan drawerwhite

contains:� Railing for pot-and-pan drawer Front connector for railing

Distributor packing

Article Order no. PU

Railing-Set 450 mm 051 481 10 setsRailing-Set 500 mm 051 483 10 setsRailing-Set 550 mm 051 485 10 sets

Rear mounting bracket for face frame cabinetsplastic

Article Order no. PU

Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600

Recommended screw no. 6

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 188

Page 17: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

189Technik für Möbel

9

18,5

32

16

12,5

Mounting example Front connector/railing drilling position

12,5

8,5

ø10 ±0,1

ø10 ±0,1

ø10 ±0,1

6,5

Y

Y = Back panel height +bottom panel thickness – 6,5 mm

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 189

Page 18: KAT 115 127 G5 USA 2011 - Hettich · Contemporary design with a generous choice of five drawer heights, for the perfect storage solution. Good looks, wide , choice , top quality Technik

190 www.hettich.com

MultiTech Accessories

Article Order no. PU

Practica universal angle stop 078 093 1

Article Order no. PU

Practica drilling template 079 637 1

Article Order no. PU

Sleeve drill ø 10 mm 078 096 1Spare drill ø 10 mm 079 005 1

Article Order no. PU

Insertion die for MultiTech 54 079 566 1MultiTech 86/118/150 and 214 040 129 1

Rear Mounting Bracket forMultiTechThe rear mounting bracket is especially designed for face frame construction as well as applications not using a full center panel.Positive fit between slide and bracket eliminates "twist-out" between parts.Interference between bracket and drawer box impossible.Elongated slots provide both horizontal and vertical adjustment.Attachment can be by screw or staples.Min. support 30 mm, max. support 86 mm.

Marking gauge Practica for MultiTech drawers/pot-and-pan drawerThe MultiTech front panel gauge (universal angle stop and drillingtemplate) makes it easy to drill holes in any required position for fixing the front panel to the drawer/pot-and-pan drawer.

Article Finish Order no. PU

Assembly jig blue 064 820 1

Article Order no. PU

Mounting tool for MultiTech 54 079 564 1MultiTech 86/118/150 and 214 040 133 1

Assembly jigfor simple, fast and precise assembly of MultiTech cabinet runners

Insertion die for front connectorsfor Blue Max mini and Blue Max 6/8/19

Mounting toolfor knock-in assembly of front connectors

Article Finish Order no. PU

Rear mounting bracket left plastic 052 101 600Rear mounting bracket right plastic 052 102 600

Recommended screw no. 6

KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 190