K400 techbook en

in.k400series of compact full-function keypads

TechBook

Giving full control to wet fingers!

http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094

1

in.k400

Table of contents

overview ......................................................................................... 3installation - drilling template .............................................................. 5 - with adhesive ...................................................................6 - with brackets ....................................................................6connections - connecting in.k400 keypad to in.xm ............................7functions - on/off key .........................................................................8 - pumps 1 & 2 keys .............................................................8 - pump 3 & blower key .....................................................9 - light key .............................................................................9 - up/down keys .................................................................9 - program key .....................................................................9 - setting time ..................................................................... 10 - setting fi lter cycle ........................................................... 10 - setting temperature unit ................................................ 11 - other features .................................................................. 11specifi cations ................................................................................12

table of contents


2

in.k400


3

in.k400

On/Off key

Pump 1 keyProgram key Light key

Up/Down keyPump 2 key

2 pump system

in.k400Compact full-featured keypadsthat gives complete control to wet fi ngers

Aeware’s new series of keypads features a large LCD display and raised keys that let users control all in.xm functions and programming directly from spa side. In.k400 comes in an easy to install waterproof plastic enclosure and is designed to maximize user experience.

On/Off key

Pump 1 keyPump 3 key Light/Program

key

Up/Down keyPump 2 key

3 pump system

overview


4

in.k400

Set Point iconThe "Set Point" icon automatically turns on when set point setting menu is activated. (SP message on display).

Filter Cycle iconThe "Filter Cycle" icon lights up when fi lter cycle is on.

Pumps iconThe "Pump" indicator

numbers light up and their icons become fast animated when pump or blower are in high speed, slower animated

icon when pump or blower are in low speed.

Heater iconThe "Heater" icon lights

up when the heater is on. It fl ashes when:

1- there is a call for heat and heater has not

started yet,2- heater has just turned

off and element is cooling down or

3 - not enough current available to start heater

Light iconThe "Light" icon lights

up when the light is on. The icon's number of rays is proportional to

the light's intensity.

Smart Winter Mode iconThe "SWM" icon automa-tically turns on when freeze protection is active. It fl ashes while system purges the spa plumbing.

Time, temperature& message digits

Service iconA problem has

been detected. Do not enter the water!

Spa service is required.

Progress barA visual indication of the time remaining

before an equipment is turned off or

before the end of the standby mode.

AM/PM (˚F/ ˚C)

overview


5

in.k400

1,50"38,1 mm

1,60"40,6 mm

1/4"6,4 mm

7/8"22,2 mm

1/4"6,4 mm

Drilling template

installation


6

in.k400

To install the in.k400, the user must cut out one 7/8" diameter hole for the cable (see illustration).

Clean the installation surface and peel the adhesive gasket from the back of the keypad.

Insert keypad and align it correctly, then ensure it's properly glued by gently pressing evenly on the entire surface.

To install the in.k400, the user must cut out two 1/4" diameter holes for the fixation studs and one 7/8" diameter hole for the cable (see illustration).

Insert keypad and align it correctly, then secure it properly in place by using the two wing nuts provided.

7/8"

Gasket with adhesive

Installation in.k400 with adhesive Installation in.k400 with brackets

1.60"

2 x 1/4"

7/8"

Gasket with orwithout adhesive

Optional wing nuts

1.50"

installation


7

in.k400

Connecting in.k400 keypad to in.xm

connections


8

in.k400

On/Off key

Depending on the spa manufac-turer, this key may have differ-ent functions: On/Off, Standby mode or quick enable of the Economy mode.

Standby Mode : Use On/Off key to pause all pumps*. Progress bar will display the remaining time before the system automatically exits Standby mode (user can also exit Standby mode at any time by pressing again on On/Off key).In order to warn the user, the spa light will fl ash for a few seconds before the exit of

Pump 1 key

Press Pump 1 key to turnPump 1 on at low speed.

Press a second time to turn pump to high speed (with a dual-speed pump).

A third time turns pump off.

A built-in timer automatically turns pump off after 20 min-utes, unless pump has been manually deactivated fi rst.

Pump 2 key

Press Pump 2 key to turnPump 2 on at low speed.

Press a second time to turn pump to high speed (with a dual-speed pump).

A third time turns pump off.


Standby mode and restart the pumps. The "Stby" message is also displayed during Standby mode.

* Pump will stay turned on if there is a request for more heat.

functions


9

in.k400

Light key

Press Light key to turn light on at high intensity.

Subsequent presses change light intensity.

A last press turns light off.

A built-in timer automatically turns light off after 2 hours, unless it has been manually deactivated fi rst.

Up/Down keys

Use Up or Down key to set desired water temperature. The temperature setting will be displayed for 5 seconds to confi rm your new selection.

The "Set Point" icon indicates that the display shows the desired temperature, NOT the current water temperature!

Program key

Use Program key to display time or enter Programming menu by pressing and holding key. In Programming mode, the following parameters can be set: time, fi lter cycle start time, fi lter cycle duration, fi lter cycle frequency, and temperature unit.

Note: Light key is used as Program key if this key is not present.

Pump 3/Blower key

Press Pump 3/Blower key to turn Pump 3/Blower on.

Press a second time to turn pump off.


functions


10

in.k400

Setting the time

Enter Programming mode by holding Prog. key pressed down for 3 sec. The display will show the current time setting.

Setting the hour:Use Up or Down arrows to change hour setting (AM/PM).

Setting the minutes:Press Prog. key a second time.

Use Up or Down key to change hour setting.

Setting fi lter cycle start time

To program the fi lter cycle, you must enter these parameters: the start time, duration and frequency. During a fi lter cycle, pumps run for one min-ute to purge the plumbing, then Pump 1 runs for the programmed number of hours.

Press Prog. key a third time.

The display will show FSxx, with "xx" representing the starting hour.

Use Up or Down key to change setting.

Setting fi lter cycle duration

Press Prog. key a fourth time.

The display will show Fdxx, with "xx" representing the duration in hours.


Filter cycle frequency

Press Prog. key a fi fth time.

The display will show FFxx, with "xx" representing the number of fi lter cycles per day (up to 4).


functions


11

in.k400

Water temperature regulation

In a regulation cycle, the system fi rst generates water fl ow through the heater housing and the plumbing, in order to ensure accurate water temperature readings as well as avoiding heater activation in dry conditions.

After verifying pump activation and taking a water temperature reading if required, the system automatically turns the heater on to reach and maintain water temperature at Set Point.

Cooldown

After heating the spa water to the desired Set Point, the heateris turned off, but its associated pump (Pump 1 Low-speed orCP) remains on for a predetermined period of time to ensure adequate cooling of the heating element, this prolongs its useful life. The heater icon fl ashes during this time.

Smart Winter Mode

Our Smart Winter Mode protects your system from the cold by turning pumps on several times a day to prevent water from freezing in pipes.

Setting temperature unit

Water temperature can be displayed in either Fahrenheit (˚F) or Celsius (˚C).

Press Prog. key a sixth time.

The display will show either˚F or ˚C.


functions


12

in.k400

General specifi cations:Environmentals:Storage temperature: 70˚C (158˚F) to –30˚C (-22˚F)Operating temperature: 60˚C (140˚F) to –20˚C (-4˚F)Humidity: up to 95% condensing

Mechanical Specs:Weight: 0.27 kg (0.6 lbs)Dimensions (W x H x D): Front Panel: 162 mm x 56 mm x 19 mm (6 3/8" x 2 7/32" x 3/4") Soft gasketStandards: UL 1563 Fifth Ed. File: E182156 CSA No. 22.2 - 218.1-M89

Dimensions:

2 7/32"(56 mm)

6 3/8"(162 mm)

Specifi cations and design are subject to change without notice.

3/4"(19 mm)(19 mm)

3 3/32"(79 mm)

1 15/32"(37 mm)

specifi cations

13/32"(10 mm)


Advanced electronics! Water resistance!

9919-100604Rev. 08/08

Gecko Alliance450 des Canetons, Quebec City (QC) G2E 5W6 Canada, 1.800.78.GECKO

9225 Stellar Court, Corona, CA 92883 USA , 1.866.639.7274

www.geckoalliance.com


Documents

K400 techbook en