r RIPE k-Packers Water Wells, Boreholes, Monitoring well applications RIPE K packers are manufactured in stainless steel or mild steel complete with a flared cone taper at the top and a weld prep on the bottom for II screens Vulcanised rubber ribs form a tight seal between the casing and screen. RIPE K packers are the perfect aid to the task of joining bore hole casings of differing diameters, water well screens or casing. Well IdEen Riser Pipe Suit Well Bore Caking 50 NB x 60.33 0 ■ 52.51 ID 65 NB x 73.0 •D x 62.71 ID 80N x 88 0 OD x 77.92 ID (P6 B x 14.30 OD x 102.26 pc 00 219.08 OD x 202.72 ID 6" 25 141.30 OD 128.2111 6" 150 x 168.30 OD x154.08 ID 8" 150 x / f / 68.30 OD x 154.08 ID Ns 10" 00 x 219.08 OD x 202.72 ID 10" 12" 25' x 273.05 OD x 254.5 ID 12" 25 k i 273.05 OD x 254.51 ID 14" 300 N 23.85 OD x 304.79 ID 11P" **Standar —Wand custom s le on request Replacement Inflatable Packers and Elements Pty Ltd 29 Wheeler St Belmont 6104, Perth Western Australia Tel: (+61 (08) 9475 0700 Fax: +61 (08) 9475 0770 [email protected]www.ripe-packers.com Australian supplier manufacturer of inflatable packers water bore well completion packer equipment and services
Many different types and sizes of RIPE K packers are manufactured all with flared cone tapers, and weld prep on the bottom for well screens or pipe extensions. Multi rubber ribs form a seal between the casing and the well screen. The rubber is fully vulcanized to the pipe casing then machined to the correct diameter and sealing requirements. The fully vulcanized rubber and the multi ribbing makes for a vast improvement on the age old problem of sealing that the old k packer once had. RIPE K packers are the perfect aid to the task of joining borehole casings of differing diameters, water well screens or casing.Replacement Inflatable Packers and Elements manufacture on request water well telescopic seal packers to suit transition joints of different diameters. Repair of weld joint using different diameters, PVC and fibreglass repairs, telescopic back seals work best where two different diameters meet, all diameter sizes manufactured on request, manufactured to minimize loss of diameter.Replacement Inflatable Packers and Elements is a Western Australian based manufacturer and supplier of inflatable packers and elements, with more than 25 years’ experience in designing and building inflatable packers. RIPE supply standard and custom built inflatable packers, repair or replace inflatable packers from other manufacturers worldwide, test all inflatable packers and equipment with NATA certified equipment.RIPE Packers offer an extensive range of products and services which include but are not limited to:- Grouting Packers - Water Well Casing Grout Shoes- Mini Hydro-Frac Packers- K Packers- Slipover Packers- PVC Blind Packers- Bridge Plug Inflatable Packers - Cement Retaining Bridge Plugs- Casing Plugs, Swage Patches & Patch Seals- Decommissioning Water Well Packers- Hydraulic Fracturing Inflatable Packers- Standard Wireline Permeability Packer System- External Casing Inflatable Packers- Casing Retrieval Fishing Tools- Multi-Port Straddle Packer Systems- Preconditioning and Block Caving Packers- Ancillary EquipmentOur customers’, both local and international come from diverse industries such as Environmental Investigations, Water Bores, Water Wells, Oil/Gas, Exploration, Civil and Mining, Conservation, extraction Industries, Drilling and Construction.You can check out our website at www.ripe-packers.com
Citation preview
r
RIPE k-Packers Water Wells, Boreholes, Monitoring well
applications
RIPE K packers are manufactured in stainless steel or mild steel
complete with a flared cone taper at the top and a weld prep on the
bottom for II screens
Vulcanised rubber ribs form a tight seal between the casing and
screen. RIPE K packers are the perfect aid to the task of joining
bore hole casings of differing diameters, water well screens or
casing.
Well IdEen Riser Pipe Suit Well Bore Caking
50 NB x 60.33 0 n 52.51 ID 65 NB x 73.0 D x 62.71 ID 80N x 88 0
OD x 77.92 ID
(P6 B x 14.30 OD x 102.26
pc
00 219.08 OD x 202.72 ID
6"
25 141.30 OD 128.2111 6"
150 x 168.30 OD x154.08 ID 8"
150 x/f/68.30 OD x 154.08 ID Ns 10"
00 x 219.08 OD x 202.72 ID 10" 12"
25' x 273.05 OD x 254.5 ID 12" 25 ki273.05 OD x 254.51 ID 14"
300 N 23.85 OD x 304.79 ID
11P"
**StandarWand custom s le on request
Replacement Inflatable Packers and Elements Pty Ltd 29 Wheeler
St Belmont 6104, Perth Western Australia
Tel: (+61 (08) 9475 0700 Fax: +61 (08) 9475 0770
[email protected] www.ripe-packers.com Australian supplier
manufacturer of inflatable packers water bore well completion
packer equipment and services
