Hi-Tech Projects,Apr’16, www.eiriindia.org # 03

JUST PREPARED NEW PROJECTS FOR YOUINDUSTRIAL FRAGRANCE AND

FLAVOUR USED INDETERGENTS COSMETICS,

JUICES, ICE CREAM(CODE NO. 1821)

Perfume is a mixture of fragrant essential oilsand aroma compounds, fixatives, and solventsused to give the human body, objects, andliving spaces a pleasant smell. Perfumecomes from the Latin “per” meaning “through”and “fumum,” or “smoke.” Many ancientperfumes were made by extracting natural oilsfrom plants through pressing and steaming.The oil was then burned to scent the air. Today,most perfume is used to scent bar soaps.Some products are even perfumed withindustrial odorants to mask unpleasant smellsor to appear “unscented.”Aroma VocabularyAccord: An accord is the perfumery equivalentto a chord in music. It’s a blend of 2 or moresmells that produce a third and distinctivesmell. An accord may be a simple mixture orconsist of many components and applieswhen each component material is in balanceand harmony with each other material so thatno single component can be detected. AromaChemical: Any chemical compound createdand used for its aromatic properties. Aromachemicals could be isolates of essential oils,the chemical modification of those isolates,or synthetic compounds from petrochemicalsBody: The main fragrance theme – the middlenote or “heart” of a perfume, it is also used todescribe a fragrance that is well-rounded orfull. Balanced: This is when a fragrance hasbeen so carefully blended that no singlearomatic body or effect is readily identifiable.

COST ESTIMATIONPlant Capacity 300.00 KGS/dayLand & Building (1000 Sq.Mtr) Rs 1.65 CrPlant & Machinery Rs 22.00 LacsW.C. for 3 Months Rs 81.00 LacsTotal Capital Investment Rs 2.73 CrRate of Return 53%Break Even Point 37%*****************************************************

CHANACHUR, BHUJIA,GANTHIA (AUTOMATIC PLANT

– 10 TPD) [CODE NO.1822]The best of 'chanachur' around KolkataShankar Lal Snacks Ezra Street The shop hasa name — Shankar Lal Snacks. But nobodyon the Ezra Street area would recognize it bythat name. To the customers, it's their favouriteGujarati shop that sells mouth-wateringmixture. A tasty concoction of eight ingredientsincluding chura, badam, papri et al, the shopis run by brothers, Ramji and LakshmanSingh. The duo insists that this mixture won'ttaste good without the papaya chutni theyserve with it. "We open the shop at 6 am asmany people like to have papri for breakfast.But after that, it's our mixture that sells most."No wonder this tangy-flavoured snack hasbeen a hot seller for the last 90 years.

COST ESTIMATIONPlant Capacity 10.00 Ton/dayLand & Building (3000 Sq.Mtr) Rs 4.02 Cr

Plant & Machinery Rs 1.18 CrW.C. for 2 Months Rs 5.18 CrTotal Capital Investment Rs 10.70 CrRate of Return 90%Break Even Point 26%***************************************************

CENTRIFUGAL CASTING[CODE NO. 1823]

Centrifugal casting or rotocasting is a castingtechnique that is typically used to cast thin-walled cylinders. It is noted for the high qualityof the results attainable, particularly forprecise control of their metallurgy and crystalstructure. Unl ike most other castingtechniques, centrifugal casting is chiefly usedto manufacture stock materials in standardsizes for further machining, rather thanshaped parts tailored to a particular end-use.In centrifugal casting, a permanent mold isrotated continuously about its axis at highspeeds (300 to 3000 rpm) as the molten metalis poured. The molten metal is centrifugallythrown towards the inside mold wall,where itsolidifies after cooling. The casting is usuallya fine-grained casting with a very fine-grainedouter diameter, owing to chilling against themould surface. Impurities and inclusions arethrown to the surface of the inside diameter,which can be machined away. Castingmachines may be either horizontal or vertical-axis. Horizontal axis machines are preferredfor long, thin cylinders, vertical machines forrings.

COST ESTIMATIONPlant Capacity 1.10 MT/dayLand & Building (3500 Sq.Mtr) Rs 2.30 CrPlant & Machinery Rs 1.13 CrW.C. for 2 Months Rs 78.53 LacsTotal Capital Investment Rs 4.32 CrRate of Return 25%Break Even Point 64%****************************************************

STEEL DRUM AND BARRELS[CODE NO.1824]

A mild steel drums will be rich in the tensileproperties and reliability. This property of apacking materials is highly required becauseon the packing materials the safety of theproduct depends. Moreover, the M.S. Drumsare resistant to internal and outside pressureenabling their use as pressure containers MildSteel drums are available in all sizes and ourpresent report deals in the Steel Barrels of210 to 240 Ltr. capacity having thickness of0.9 to 1.6 mm, diameter 570 mm +- 2mm andheight of drum would be 880 mm to 990 mm.The basic mechanics of barrel productionhave remained essentially the same. A cutteris drawn through the barrel at a specified rateof twist and slowly cuts one groove at a time.Called cut rifling, it was the first method everused to rifle a barrel. A small hook-shapedcutter is pulled through the barrel to removea tiny amount of metal. When a pass iscomplete, the barrel is rotated or indexed tothe position of the next groove.

COST ESTIMATIONPlant Capacity 1000.00 NOS/dayLand & Building US$ 24.80 Lacs

Plant & Machinery US$ 1.89 LacsW.C. for 2 Months US$ 7.45 LacsTotal Capital Investment US$ 36.63 LacsRate of Return 52%Break Even Point 30%***************************************************

GROUND NUT OIL [CODE 1825]Peanut oil, also known as groundnut oil orarachis oil, is a mild tasting vegetable oilderived from peanuts. The oil is available inrefined, unrefined, cold pressed, and roastedvarieties, the latter with a strong peanut flavorand aroma, analogous to sesame oil. It is oftenused in Chinese, South Asian and SoutheastAsian cuisine, both for general cooking, andin the case of roasted oil, for added flavor.Peanut oil has a high smoke point relative tomany other cooking oils, so is commonly usedfor frying foods. Its major component fattyacids are oleic acid (46.8% as olein), linoleicacid (33.4% as linolein), and palmitic acid(10.0% as palmitin). The oil also containssome stearic acid, arachidic acid, arachidonicacid, behenic acid, lignoceric acid and otherfatty acids.

COST ESTIMATIONPlant Capacity 1.00 MT/dayLand & Building (100 Sq.Mtr) Rs. 4.00 LacsPlant & Machinery Rs.3.20 LacsW.C. for 3 Months Rs. 42.12 LacsTotal Capital Investment Rs. 49.97 LacsRate of Return 67%Break Even Point 28%****************************************************

POLYOLS FROM CASTOR OIL[CODE NO.1826]

Natural oil polyols, also known as NOPs orbiopolyols, are polyols derived from vegetableoils by several different techniques. Theprimary use for these materials is in theproduction of polyurethanes. Most NOPsqualify as biobased products, as defined bythe United States Secretary of Agriculture inthe Farm Security and Rural Investment Actof 2002. NOPs all have similar sources andapplications, but the materials themselves canbe quite different, depending on how they aremade. All are clear liquids, ranging fromcolorless to medium yellow. Their viscosity isalso variable and is usually a function of themolecular weight and the average number ofhydroxyl groups per molecule (higher mw andhigher hydroxyl content both giving higherviscosity.) Odor is a significant property whichis different from NOP to NOP. Most NOPs arestill quite similar chemically to their parentvegetable oils and as such are prone tobecoming rancid. This involves autoxidationof fatty acid chains containing carbon-carbondouble bonds and ultimately the formation ofodoriferous, low molecular weight aldehydes,ketones and carboxyl ic acids. Odor isundesirable in the NOPs themselves, but moreimportantly, in the materials made from them.

COST ESTIMATIONPlant Capacity 1.00 MT/dayLand & Building (3000 Sq.Mtr) Rs. 1.99 CrPlant & Machinery Rs 1.25 CrW.C. for 1 Month Rs. 2.12 Cr

Top Industries to Start

Hi-Tech Projects,Apr’16, www.eiriindia.org # 04

Patrons : you can deposit the amount in EIRI CurrentAccount UNION BANK OF INDIA 307201010015149

(IFS Code: UBIN0530727)

Total Capital Investment Rs. 5.53 CrRate of Return 32%Break Even Point 48%*****************************************************

RICINOLEIC ACID[CODE NO. 1827]

Ricinoleic acid, formally called 12-hydroxy-9-cis-octadecenoic acid is a fatty acid. It is anunsaturated omega-9 fatty acid.[1] It is a majorcomponent of the seed oil obtained frommature Castor plant (Ricinus communis L.,Euphorbiaceae) seeds or in sclerotium of

ergot (Claviceps purpurea Tul. ,Clavicipitaceae). About 90% of the fatty acidcontent in castor oil is the triglyceride formedfrom ricinoleic acid.

COST ESTIMATIONPlant Capacity 20.00 MT/dayLand & Building (4000 Sq.Mtr) Rs.2.65 CrPlant & Machinery Rs 1.55 CrW.C. for 1 Month Rs. 11.52 CrTotal Capital Investment Rs. 15.87 CrRate of Return 56%Break Even Point 27%****************************************************

UNDECENOIC ACID[CODE NO.1828]

Undecenoic Acid is the parent substance forthe synthesis of several higher alcohalsand aldehydes especially those containgnine and eleven carbon items. Noncyclicaldehyde can be obtained from Undecylenicacid or from heptaldehyde. Reduction ofUndecylenic acid with sodium and alcohalconverts its into Undecylenic alcohol whichis chracterised by a flowery odour with apersisting fatty note. Reduction by freehydrogen in the presence of colloidalpalladum as catalyst saturates the doublebond producing Undecylenic acid which canbe converted into Undecylic alcohal avaluable modifier and a tip note compound.This alcohol can be oxdised to give thecorresponding aldehyde an equally importantproduct for the perfumery industry.

COST ESTIMATIONPlant Capacity 15.00 Ton/dayLand & Building (5000 Sq.Mtr) Rs.5.91 CrPlant & Machinery Rs 5.10 CrW.C. for 2 Months Rs. 15.41 CrTotal Capital Investment Rs. 27.33 CrRate of Return 114%Break Even Point 29%**************************************************

PORTABLE SOLAR POWERSYSTEMS (SOLAR PANELS,

SOLAR LANTERN, PORTABLESOLAR HOME LIGHTING

SYSTEMS, SOLAR PANEL FORFANS, SOLAR WATER PUMPS

ETC.) [CODE NO. 1829]Solar panel refers either to a photovoltaic’s(PV) module, or to a set of solar photovoltaic’smodules electrically connected and mountedon a supporting structure. A PV module is apackaged, connected assembly of solar cells.Solar panels can be used as a component ofa larger photovoltaic system to generate andsupply electr ici ty in commercial andresidential applications. Each module is ratedby its DC output power under standard testconditions, and typically ranges from 100 to320 watts. The eff ic iency of a moduledetermines the area of a module given thesame rated output –an 8% efficient 230 wattmodule will have twice the area of a 16%efficient 230 watt module. There are a fewsolar panels available that are exceeding 19%

efficiency. A single solar module can produceonly a l imited amount of power ; mostinstallations contain multiple modules. Aphotovoltaic system typically includes a panelor an array of solar modules, an inverter, andsometimes a battery and/or solar tracker andinterconnection wiring.

COST ESTIMATIONLand & Building (2000 Sq.Mt) Rs.1.48 CrPlant & Machinery Rs 74.90 LacsW.C. for 2 Months Rs.76.45 CrTotal Capital Investment Rs.78.89 CrRate of Return 28%Break Even Point 34%

****************************************************

PORTABLE SOLAR POWERSYSTEMS (SOLAR PANELS,

SOLAR LANTERN, PORTABLESOLAR HOME LIGHTING

SYSTEMS, SOLAR PANEL FORFANS, SOLAR WATER PUMPS

ETC.) [CODE NO. 1829]Solar panel refers either to a photovoltaic’s(PV) module, or to a set of solar photovoltaic’smodules electrically connected and mountedon a supporting structure. A PV module is apackaged, connected assembly of solar cells.Solar panels can be used as a component ofa larger photovoltaic system to generate andsupply electr ici ty in commercial andresidential applications. Each module is ratedby its DC output power under standard testconditions, and typically ranges from 100 to320 watts. The efficiency of a moduledetermines the area of a module given thesame rated output –an 8% efficient 230 wattmodule will have twice the area of a 16%efficient 230 watt module.

COST ESTIMATIONLand & Building (2000 Sq.Mt) Rs.1.48 CrPlant & Machinery Rs 74.90 LacsW.C. for 2 Months Rs.76.45 CrTotal Capital Investment Rs.78.89 CrRate of Return 28%Break Even Point 34%****************************************************

WARE HOUSE (CODE NO.1830)A simple definition of a warehouse is: ‘Awarehouse is a planned space for the storageand handling of goods and material.’ Ingeneral, warehouses are focal points forproduct and information flow betweensources of supply and beneficiaries.However,in humanitarian supply chains, warehousesvary greatly in terms of their role and theircharacteristics. The global warehousingconcept has gained popularity over the lastdecade as stock pre-positioning becomes oneof the strategies for ensuring a timelyresponse to emergencies.

COST ESTIMATIONLand & Building (20000 Sq.Mtr) Rs.1.44 CrPlant & Machinery Rs 74.90 LacsW.C. for 3 Months Rs. 25.69 LacsTotal Capital Investment Rs. 2.71 CrRate of Return 25%*****************************************************

1. BLISTER FILM P.V.C2. FOAMED PVC COMPOUNDING &

ITS PRODUCTS (PROFILES,BOARDS, PIPES, ETC.)

3. P.V.C. NON-WOVEN MAT4. P.V.C. INSULATION TAPE5. P.V.C. PIPES & FITTINGS6. P.V.C. COMPOUNDING (FRESH)7. P.V.C. BATTERY SEPARATOR8. P.V.C. FLEXIBLE PIPES9. P.V.C. FOOT WEAR10. P.V.C. LEATHER CLOTH11. P.V.C. WIRES AND CABLES12. P.V.C. FILMS13. P.V.C. GRANULES FROM PLASTIC

WASTE14. P.V.C. CONDUIT PIPES15. P.V.C. COVER & FILES

(CONFERENCE BAGS, FOLDERS,FILE COVERS, DIARY COVERSETC.)

16. P.V.C./PLASTICS (SOFT/RIGID)FILMS/SHEET

17. P.V.C. INSULATION TAPE18. P.V.C. STABILIZERS19. P.V.C. EXTRUSION PROFILES

(WIRING CHANNELS)20. P.V.C. RESIN FROM CALCIUM

CARBIDE21. P.V.C. INDUSTRIAL PRODUCTS

(INJECTION MOULDED)22. P.V.C. FLUSH CISTERN23. RIGID PVC COMPOUNDED

GRANULES FOR INJECTIONMOULDING MACHINE (USED FORPIPE FITTINGS, ELBOWS,SOCKETS, NUTS, ETC.)

24. uPVC DOORS & WINDOWS25. uPVC DOORS & WINDOWS

PROFILESEach Project Report covers in this CD containsIntroduction, Uses, Market, Process with ProductFormulae, Suppliers of Plant & Equipments and RawMaterials, Cost Economics with Profitability Analysis,BEP, Resources of Finance etc.

Ask for Price of this CD containing all above 25 ProjectReports. Payable fully in advance through Bank Draft/M.O. in favour of ENGINEERS INDIA RESEARCHINSTITUTE, DELHI. Delivery within 3 days. (To Orderplease dial : 098114-37895).

Hi-Tech Projects,Apr’16, www.eiriindia.org # 05

Start Your Own IndustryLIQUID GLUCOSE FROMPOTATOES [EIRI-1530]

Potato is widely consumed as food all over theworld. It contains the starch as a majorcarbohydrate. Surplus and cull potatoes areused as feed for live stock and also as rawmaterial for the manufacture of starch, ethylalcohal and a few other industrial products like,dextrose, liquid Glucose etc. The potatocontains approximately 18-21% ofcarbohydrates. The major carbohydrate isstarch. This starch is comprising 65-80% ofthe dry weight of the tuber, is calorifically themost important nutritional component. In theraw tuber, it is present as microscopic granulesin levcoplasts lining the interior cell walls ofparenchyma tissue. The granule is ellipsoidalin shape, 100N*60N, with striations like anoyster shell. Under polarized light, the granuleshows an irregular black cross. Electronmicrographs reveal a surprising smoothsurface structure. The ratio of amylase toamylopectine in potato starch is 24:76 and thegelatinization temperature ranges from 56oCto 69oC with water this starch forms atranslucent paste of high viscosity. Freshlyharvested mature tubers contain more sugarsthan the large ones. A slight rise in total sugarsis observed when tubers are stored at 20-30oC.However when the storage temperature is 4oCor less., the total reducing sugars increase, therate and extent of increase being greater whenlower the temperature down to the freezingpoint. The maximum sugar concentration (3 to10%) is reached after 4-8 weeks. Potato starchis produced from varieties selected and grownfor their high starch, low protein and low fibrecontains. In USA and else where, only surpluspotatoes and tubes unsuitable for table use areused for starch production.

Cost EstimationPlant Capacity 25 MT./DayLand & Building (5 Acres) Rs. 3.39 Cr.Plant & Machinery Rs. 8.05 Cr.W.C. for 2 Months Rs. 2.12 Cr.Total Capital Investment Rs. 14.18 Cr.Rate of Return 18%Break Even Point 69%******************************************************

RIGID PVC FILMMANUFACTURE FOR

PHARMACEUTICALS BLISTERPACKAGING [EIRI-1533]

Plastic films (PVC) have got wide usesincluding for garments and saree packaging.Polyvinyl chloride (P.V.C.) is one of if not thelargest single volume plastics material ingeneral use in the world. It is potentially one ofthe lowest cost materials. The French chemistRegnault first discovered P.V.C. in 1835 and itwas initially marketed commercially in 1827.P.V.C. has achieved this market leadershipbecause of its good physical properties, itscompounding versatility for a wide variety ofapplications, its low cost, and processing case.These desirable properties include selfextinguishing characteristics, water, chemicaland abrasion resistance, good strength

properties and a complete range of colours.The compounds range from soft flexible films,to rigid, high strength products. Plasticizerslubricants, fillers and stabilizers are used toproduce this versatility and it possible to makea compound with a right balance of propertiesfor almost any application. P.V.C. products willmelt but will not burn and good weather abilityhas been achieved by compounding. There arevarious theories on compounding of P.V.C. butthe PVC processor especially in small scalesector in India because of lack of availabilityand high price of sophisticated equipmentsinstruments testing facilities trained technicalpersonnel, raw materials looks forward tosomething practical which wood benefit him inknowing the best possible and mosteconomical method of PVC compounding.Compounding process includes (i) formulationof compound according to the propertiesdesired (ii) Palletizing. The palletizing processis done either by rotary knife cutter orgranulator.

Cost EstimationPlant Capacity 2 Ton/DayLand & Building (1500 sq.mt.) Rs. 2.10 Cr.Plant & Machinery Rs. 3.93 Cr.W.C. for 3 Months Rs. 1.33 Cr.Total Capital Investment Rs. 7.75 Cr.Rate of Return 30%Break Even Point 51%********************************************************

PRESTRESSED CONCRETEPOLES (PSC POLES)

[EIRI-1534]Wooden, steel and concrete poles were usedfor power distribution lines since 19th century.The first poles used were wooden poles. Whendemand for poles increase and as the powerlines under construction required longer polessuitable for resisting larger horizontal forces,steel poles were introduced in substitution towood. Though both materials are still in usethrough out the world, with wood primarily usedfor short length small forces country lines thegeneral trend is to substitute both the materialswith concrete and Use reinforced andprestressed concrete poles instead. Woodenhave limited life and steel poles have a longerlife compared to wooden poles requirescontinuous maintenance for protection againstcorrosion concrete and particularly prestressedconcrete poles can be considered as havingan unlimited life without maintenance cost fortheir corrosion protection. Poles supportingpower lines are subjected to relatively smallvertical forces and primarily to large horizontalforces at bottom. The horizontal forces at theirtop are smaller along the axis of the power line& much larger on direction perpendicular to it.

Cost EstimationPlant Capacity 117 Nos/DayLand & Building (16000 sq.mt.) US$10.60 LacsPlant & Machinery US$ 10.89 LacsW.C. for 2 Months US$ 5.56 LacsTotal Capital Investment US$ 27.56 LacsRate of Return 36%Break Even Point 60%*******************************************************

1. AUTOMOBILE PAINTS2. ALUMINIUM PAINT3. ACRYLIC COPOLYMER EMULSION4. ACRYLIC EMULSION PAINTS5. BITUMINOUS BASED CORROSION

RESISTANT6. CEMENT PAINT7. CLEAR TRANSPARENT LACQUER FOR

COATING ON BRASS BANGLES TO MAKEIT WEATHER-RESISTANT

8. COPPER PHTHALOCYANINE BLUE & GREEN9. DRY DISTEMPER AND CEMENT PAINT10. EMULSION PAINTS11. ELECTROPHORIC LACQUER,

POLYURETHANE (PU) LACQUER(WATER BASED) IN LIQUID FORM FORELECTROPHORETIC COATINGAPPLICATION ON METAL PLATES

12. ENAMEL REMOVERS13. ENAMELLING OF COPPER WIRE14. EPOXY RESINS15. GLASS PUTTY16. GLASS COATING SOLUTION17. HAMMERTONE PAINTS18. INSULATING VARNISH19. INSULATING VARNISH (POLY VINYL

BUTYRAL BASED, FFC GRADE)20. LIME COLOUR/CEMENT COLOUR

(SYNTHETIC- RED IRON OXIDE)21. LACQUER EMULSION FOR LEATHER

FINISHING & N.C.LACQUER FORLEATHER FINISHING (FORMULATION &MANUFACTURING PROCESSES)

22. NAPHTHA BASED THINNER23. N.C.PUTTY24. N.C. THINNERS USED IN AUTOMOBILES25. OIL-BOUND DISTEMPER PAINTS26. PAINT INDUSTRY27. PAINT REMOVERS28. PAINT DRIERS29. POWDER COATING PAINTS30. PAINT AND REDUCER31. PRIMER PAINTS, ENAMEL PAINTS

& DISTEMPER32. POWDER COATING33. PRIMER PAINTS & ENAMEL PAINTS34. POLY VINYL ACETATE EMULSION35. PIGMENTS BINDERS FOR

TEXTILE PRINTING36. PUTTY AND WATER PROOFING PAINT37. PHENOL FORMALDEHYDE RESIN38. POLY AMIDE RESIN39. REFRACTORY PAINT (GRAPHITE BASED)40. RED OXIDE PIGMENTS41. STOVING PAINT42. SILICONE EMULSION FOR TEXTILE43. STAINER FOR PAINTS44. SOLVENTS & THINNERS45. TEXTURE PAINTS46. THINNERS47. THINNERS (ETHYL ALCOHOL BASED)48. THINNERS (WHITE SPIRIT BASED)49. UREA FORMALDEHYDE RESIN50. UNSATURATED POLYESTER RESINS51. VARNISH (CLEAR) FOR WOOD

(FLAME-RETARDING TYPE)52. WOOD PRIMER FOR PAINTS53. WALL PUTTY54. WIRE ENAMEL

Each Project Report covers in this CD containsIntroduction, Uses, Market, Process with ProductFormulae, Suppliers of Plant & Equipments and RawMaterials, Cost Economics with Profitability Analysis,BEP, Resources of Finance etc.

Ask for Price of this CD containing all above 54 ProjectReports. Payable fully in advance through Bank Draft/M.O. in favour of ENGINEERS INDIA RESEARCHINSTITUTE, DELHI. Delivery within 3 days. (To Orderplease dial : 098114-37895).

54 PAINT, VARNISH, SOLVENTS, LACQUERS, RESINS, ENAMEL, PIGMENTS THINNER AND

POWDER COATING PROJECT REPORTS (54 PROJECT REPORTS IN CD)

Hi-Tech Projects,Apr’16, www.eiriindia.org # 06

Patrons, deposit amount in EIRI AccountICICI BANK LTD. CA-038705000994

(RTGS/NEFT/IFSC Code: ICIC0000387)

Start Your Own IndustryFROZEN POTATO PATTY

[EIRI-1529]Frozen potato patty is an important snacks foodhaving good demand and is being appreciatedby masses. Freezing food preserves it from thetime it is prepared to the time it is eaten.Freezing food slows down decomposition byturning residual moisture into ice, inhibiting thegrowth of most bacterial species. In the foodcommodity industry, there are two processes:mechanical and cryogenic (or flash freezing).The freezing kinetics is important to preservethe food quality and texture. Quicker freezinggenerates smaller ice crystals and maintainscellular structure. Cryogenic freezing is thequickest freezing technology available due tothe ultra low liquid nitrogen temperature (-1960C). Frozen products do not require anyadded preservatives because microorganismsdo not grow when the temperature of the foodis below -9.50C, which is sufficient on its ownin preventing food spoilage.

Cost EstimationPlant Capacity 8 Ton/DayLand & Building (1500 sq.mt.) Rs. 2.23 Cr.Plant & Machinery Rs. 8.35 Cr.W.C. for 3 Months Rs. 4.67 Cr.Total Capital Investment Rs. 16.06 Cr.Rate of Return 24%Break Even Point 59%*******************************************************

HYDROXY PROPYL GUAR(HPG) AND CARBOXY METHYL

HYDROXY PROPYL GUAR[EIRI-1526]

The guar bean tetragonolobus, an annuallegume, is the source of guar gum. It growsbest under conditions with frequent rainfall, buttolerates arid conditions well. India grows 80%of world production of Guar gum but due tostrong demand, it is being introduced into newareas. It is mainly grown in areas of India(Rajasthan, Haryana, Gujarat and Punjab)Pakistan, Sudan, and USA. India produces 6.07.5 lakh tons of guar annually. In IndiaRajasthan and Haryana states contribute 85%of the total production. In Rajasthan, the districtJaisalmer, Barmer, Nagaur, HanumangarhJhunjhunu and Sikar. The districts in Haryanaindulged in the production of guar are Bhiwani,Sirsa, and Rewari and the districts in Gujaratare Kutch, Banaskantha, Ahmedabad. Jodhpurcity in Rajasthan is one of the India. Guar alsoknown as cluster bean (leguminous crop. Guaris being grown for seed, is an annual plant,about 4 feet high, vertically Each pod is about5-8 cm long and has seeds.

Cost EstimationPlant Capacity 30 MT./DayLand & Building (4000 sq.mt.) Rs. 5.70 Cr.Plant & Machinery Rs. 1.90 Cr.W.C. for 3 Months Rs. 30.47 Cr.Total Capital Investment Rs. 38.51 Cr.Break Even Point 25%********************************************************

TOMATO, GUAVA AND MANGOPULP [EIRI-1523]

Guava is a pear or round shaped fruit growingin the tropical region. Guava is one of the mostcommon plants abundantly grown in all regionsof India. The trees are usually narrow andtrunked. There is almost no bark in these trees.The fruit is characterized by white interior. Theinside of the fruit is highly fleshy with a numberof hard seeds. Guava fruit is one of the richestsources of Vitamin C. There is also a goodamount of pectin in this fruit. A good qualitycommercial pulp is obtained by passing theguava fruit extracts through 0.7mm sieve. Indiais the home of mangoes.

Cost EstimationPlant Capacity 80 Ton/DayLand & Building (Area 5 Acres) Rs. 9.05 Cr.Plant & Machinery Rs. 10.41 Cr.W.C. for 1 Months Rs. 4.34 Cr.Total Capital Investment Rs. 24.39 Cr.Rate of Return 42%Break Even Point 43%******************************************************

PARTICLE BOARD FROM RICEHUSK OR WOOD WASTE ORSUGARCANE BAGASSE OR

MIXED OF ALL ABOVE[EIRI-1521]

Development of particle and fibre board hasbeen consequential to man’s quest for optimumutilization of timber and wood wastes whichearlier were used mainly as fuel. Initialdevelopment of particle board took place inGermany during the Second World War whenits timber supplies were practically cut-off fromthe supplying countries. Particle board plantswere set up in postwar West Germany to meetthe demand for reconstruction. In the fiftiesparticle board manufacturing plants were setup in Europe and USA. The industry has nowdeveloped throughout the world. The origin offibre board can be traced back to the beginningof 20th century in England and USA. It receiveda fillip in 1934 as a Swedish engineer developedthe defibrator process or thermo mechanicalpulping process.

Cost EstimationPlant Capacity 4 MT./DayLand & Building (4000 sq.mt.) Rs. 5.41 Cr.Plant & Machinery Rs. 1.25 Cr.W.C. for 2 Months Rs. 51 LacsTotal Capital Investment Rs. 7.31 Cr.Rate of Return 37%Break Even Point 44%******************************************************

LIQUID GLUCOSE FROMBROKEN RICE [EIRI-1516]

Starch is a group of polysacchrides, composedof glucopyranose units joined together by-glucosidric linkages. It conforms to themolecular formula, (C6-H10O5)u, where nvaries from a few hundred to over one million.Starch is found as the reserve carbonhydratein various parts of plants and is enzymaticallybroken down to gluose to other erbohydratesaccording to the metabollic needs of the plants.

Industrially, starch is broadly divided into twotypes viz, natural and modified. Naturalstarches, also designated as unmodifiedstarches or simply starches, are obtained fromgrains such as and sorghum. from roots likepotato, tapioca and arrow root, and from thepith of the stems of certain palms such a sago.The characteristics of the natural starches arechanged by chemical or enzymatic action andthe products of these reactions are termedmodified starches. This group includesdextrins, acid-modified starches, oxidizedstarches, starch esters, starch ethers,dialdehyde starches, and cationic starches.

Cost EstimationPlant Capacity 40 MT./DayLand & Building (16’000 sq.mt. Rs. 13.47 Cr.Plant & Machinery Rs. 4.60 Cr.Total Capital Investment Rs. 24.43 Cr.Rate of Return 36%Break Even Point 47%********************************************************

MINI FLOUR MILL(ATTA, MAIDA, SUJI)

[EIRI-1511]The plant will have facility to produce, Maida,Sooji, Atta and bran. These products will besold as per the guidance issued for Food andCivil Supplies Department of the concernedstate. The same plant can be used to processother cereals such as rice gram, dal etcHowever, attempt is made have to examinefeasibility and profitability of processing wheatto produce Maida, Sooji, Atta and bran. Flourmill serve the purpose of processing wheat toconvert it into flour. Wheat grains are theseeds of the wheat plant which is able to growis kinds of soil and under widely differingclimatic conditions.

Cost EstimationPlant Capacity 40 MT/DayLand & Building (2000 sq.mt.) Rs. 2.55 Cr.Plant & Machinery Rs. 57 Cr.Total Capital Investment Rs. 5.39 Cr.Rate of Return 41%Break Even Point 42%******************************************************

DRY WALL PUTTY (WHITECEMENT BASED) [EIRI-1475]

White cement based Wall Putty a plasteringmaterial to fill the holes and patches beforepaint primer or distemper. In general, fillers &stoppers are paste-like materials, highlypigmented, used to fill surface imperfections(fillers) and to make good gross surface defectsprior to painting operations (stoppers). Itrenders to the surface, smooth bright whitecoating suitable for over coating by differentkinds of water and solvent based paints.

Cost EstimationPlant Capacity 100 Ton./DayLand & Building (1200 sq.mt.) Rs. 1.20 Cr.Plant & Machinery Rs. 79 Cr.W.C. for 1 Months Rs. 4.25 Cr.Total Capital Investment Rs. 6.44 Cr.Rate of Return 29%Break Even Point 62%******************************************************

Top Industries to Start

Hi-Tech Projects,Apr’16, www.eiriindia.org # 07

Deposit amount in EIRI AccountAXIS BANK LTD. 054010200006248

(IFS Code: UTIB0000054) or ICICI BANKLTD. CA-038705000994

(RTGS/NEFT/IFSC Code: ICIC0000387)

CELLULAR LIGHTWEIGHTCONCRETE BRICKS

(CLC BRICKS) [EIRI-1450]Bricks remain one of the most importantbuilding materials in the country. Brick makingis a traditional industry in India, generallyconfined to rural areas. In recent years, withexpanding urbanization and increasingdemand for construction materials, brick kilnshave to grow to meet the demand. It has directlyor indirectly caused a series of environmentaland health problems. At a local level,environmental pollution from brick-makingoperations is injurious to human health,animals and plant life. At a global level,environmental pollution from brick-makingoperations contributes to the phenomena ofglobal warming and climate change. Also,extreme weather may cause degradation of thebrick surface due to frost damage. Globalwarming and Environmental pollution is now aglobal concern. Cellular Light WeightTechnology blocks can be used as analternative to the red bricks, to reduceEnvironmental pollution and Global warming.CLC blocks are environment friendly. Theenergy consumed in the production of CLCblocks is only a fraction compared to theproduction of red bricks and emits no pollutantsand creates no toxic products or by products.

Cost EstimationPlant Capacity 60 Cubic Mt./DayLand & Building (10,000 sq.mt.) Rs. 10.11 Cr.Plant & Machinery Rs. 85 LacsW.C. for 2 Months Rs. 66 LacsTotal Capital Investment Rs. 12.21 Cr.Rate of Return 23%Break Even Point 52%*******************************************************

CONVERSION WASTE PLASTICWITH TYRE INTO ACTIVATEDCARBON AND INDUSTRIAL

FUEL [EIRI-1444]The disposal of plastic waste and used tyre byland filling is becoming an increasingly seriousproblem from a environmental and economicstand point, a better solution is to reprocesstire into valuable products such as activatedcarbon other solid carbon form (e.g. carbonblack) and liquid and gaseous fuel. A processdesign is proposed which involves pyrolysis ofplastic waste and used tires, activation of thesolid residue, partial combustion of liquid toproduce carbon black and the use of high BTUgas for process heat. The activation of the solidresidue is done using CO2 which produces COand activated carbon. The CO2 is regeneratedand the lost carbon is recovered using theboudouard reaction to produce CO2 and finelydivided carbons.

Cost EstimationPlant Capacity 1 Ton/DayLand & Building (Area 600 sq.mt.) Rs. 82 LacsPlant & Machinery Rs. 40 LacsW.C. for 1 Months Rs. 6 LacsTotal Capital Investment Rs. 1.31 Cr.Rate of Return 15%Break Even Point 70%

RICE MILL [EIRI-1359]Rice sheller is the process that helps in removalof hulls and bran from Paddy grains to producepolished rice. The objective of rice milling is toget whole grain rice and preserve most of therice kernel, in their approximate original shape.In order to improve nutritional and cookingquality of rice, a pre-treatment is given to paddyand the r ice so obtained by milling thepretreated paddy is known as parboiled rice.The rice obtained from milling untreated rice isknown as raw rice or white rice. Primary millingof rice is an important activity in food grains.Rice is used in almost all parts of India. Fewdecades ago, rice grains were processed atfamily level before cooking.

Cost EstimationPlant Capacity 40 Ton/DayLand & Building (1.5 Acres) Rs. 3.35 Cr.Plant & Machinery Rs. 2.23 Cr.W.C. for 3 Months Rs. 5.07 Cr.Total Capital Investment Rs. 10.97 Cr.Rate of Return 41%Break Even Point 40%*******************************************************

DISPOSABLE PLASTICSYRINGES (STERILISED)

[EIRI-1138]With the development of Intravenous andIntramuscular inspection use of syringes foreffecting transfer of medicines to human bodyfor desired quick results has because inevitable.With growing consciousness of sterilization andspreading of diseases uses of plasticdisposable syringes have been developed andare being preferred. In fact syringes areinstruments which are used for injecting liquidinto body of human beings or of animals. Itcuriosity of a cylinder and a air tight pistons.These syringes are available in sizes varyingfrom 2 c.c. to 100 c.c. Most popular andcommonly used sizes are 2 c.c. other sizes arealso frequently used but to a lesser extent. .

Cost EstimationPlant Capacity 67200 Nos/DayLand & Building (1000 Yard) Rs. 1.92 Cr.Plant & Machinery Rs. 1.87 Cr.W.C. for 2 Months Rs. 1.29 Cr.Total Capital Investment Rs. 5.25 Cr.Rate of Return 61%Break Even Point 40%******************************************************

DISPOSABLE PAPER CUPS,GLASSES & PLATES

[EIRI-0838]Paper Items such as paper cups, saucers,Glass, paper plates is finding extensive usagethese days for serving eatables in parties,functions and social gatherings. Paper platesare the most commonly used disposablecrokery in India. Paper conists of sheetmaterials and are comprised of bonded smalldiscrete fibers which are usually cellulosic innature and are held together by secondarybonds most probably the hydrogen bonds.Paper is made in a wide variety of types andgrades to serve many functions. Writing andprinting papers constitute approx 30% of the

total production.Cost Estimation

Plant Capacity 500 KGS/DayLand & Building (450 sq.mt.) Rs. 3 LacsPlant & Machinery Rs. 5 LacsW.C. for 3 Months Rs. 21 LacsTotal Capital Investment Rs. 30 Cr.Rate of Return 35%Break Even Point 46%*******************************************************

DISPOSABLE PLASTIC CUPS,GLASS ETC. [EIRI-0563]

Today consumption of Disposable products isbreaking records. Disposable products areeasy to handle, economical and can bedisposed easily. With the changing lifestyle ofMankind, the use of disposable products israising like anything. Plastic Disposableproducts are very popular because it can becarried easily, and very low in prices too. Thereis a huge variety available in Plastic Disposableproducts. Plastic Disposable products are likea gift for today’s hectic lifestyle, they save yourenergy and money both. The productsdesigned to disposed easily after use arecalled Disposable products & the productswhich are made with any kind of plastic andcan be disposed easily after use are knownas Disposable Plastic Products.

Cost EstimationPlant Capacity 30000 Nos./DayLand & Building (350 sq.mt.) Rs. 20 LacsPlant & Machinery Rs. 12 LacsW.C. for 1 Months Rs. 1 LacsTotal Capital Investment Rs. 34 LacsRate of Return 25%Break Even Point 62%********************************************************

BIO -DIESEL EXTRACTIONFROM JATROPHA, SOYABEAN,

SUNFLOWER, RICE BRAN,ALGE & CULTIVATION OF

JATROPHA [EIRI-1333]Bio-diesel is forming a promising sustainablesource of energy and is gaining world wideacceptance as a solution to problems ofenvironmental degradation, energy insecurityand restrictive price structure. Therefore theproduction of Bio-diesel is becoming anincreasingly important element in global energypolicies. India, a fast growing economy is facingthe challenge of meeting a rapid increase inits energy demand. Price of Detailed ProjectReport is Rs. 18,000/- Only.

Cost EstimationPlant Capacity 40 MT./DayLand & Building (12,300 sq.mt.) Rs. 3.18 Cr.Plant & Machinery Rs. 4.55 Cr.W.C. for 2 Months Rs. 7.98 Cr.Total Capital Investment Rs. 15.88 Cr.Rate of Return 74%Break Even Point 25%******************************************************

Hi-Tech Projects,Apr’16, www.eiriindia.org # 08

Best Industries to Start and Grow

Patrons, deposit amount in EIRI Account

STATE BANK OF INDIA CA-30408535340(RTGS/NEFT/IFSC Code: SBIN0001273)

Hi-Tech Projects(Date of Posting 24th to 30th of Every Month,

Weight of Magazine- Upto 48 Gram)

An Industrial Monthly Magazine onHi-Tech Projects & developed

and underdevelopingTechnologies with lucrative

Project opportunitiesEditor

Sudhir GuptaAsst. EditorAnkur Gupta

SUBSCRIPTION RATESFOR INDIA

Single Copy Rs. 20/-One Year Rs. 225/-

Three Years Rs. 650/-(Add Rs. 100/- for outstation cheques.

Please make the Draft/Cheque infavour of “Engineers India Research

Institute, Delhi”

FOR OVERSEASSingle Copy US$ 10/-One Year US$ 120/-

CAUTIONProject Reports/Profiles provided in

this issue had been prepared ondatas available at the time of

preparing these reports.Entrepreneurs/Industrialists are

requested to please update the databefore venturing into any project

mentioned herein.

PUBLISHERS

4449 Nai Sarak, Main Road, Delhi - 110006(INDIA) Ph : 9111- 23916431, 23918117,

45120361, 9811437895, 9811151047E-Mail : eiribooks@yahoo.com,

eiriprojects@gmail.comWebsite: www.eiriindia.org

www.eiribooksandprojectreports.com

Patrons may also directly transfer thefund for Project Reports & Books in

following EIRI current accounts:HDFC BANK - 05532020001279(RTGS/NEFT/IFSC CODE: HDFC0001981)

ICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE: ICIC0000387)

AXIS Bank Ltd. - 054010200006248(RTGS/NEFT/IFSC CODE:UTIB0000054)

UNION BAK OF INDIA -307201010015149(RTGS/NEFT/IFSC CODE: UBIN0530727)

STATE BANK OF INDIA -30408535340(RTGS/NEFT/IFSC CODE: SBIN0001273)

AND SMS US ON PH. +91 9811437895

PLASTIC WATER STORAGETANKS [EIRI-1487]

The term Plastics usually refers to a large andvaried group of synthetic materials which aresolid in finished form but at some stage in theirprocessing are fluid enough to be shaped byapplication of heat and pressure. The use ofplastics in building has grown rapidly in the lastfew years. Plastics were first used fordecorative and non structural purposes butbecause of increased knowledge of the longterm proper ties of plastics par ticularlyresistance to creep and environmental effectssome plastics are now available that maintainlong term structural integrity, such as piping,doors and windows, water tanks that cancontain moderate pressures for a long periodof time.

Cost EstimationPlant Capacity 30 Nos./DayLand & Building (4000 sq.mt.) Rs. 30 LacsPlant & Machinery Rs. 1.14 Cr.W.C. for 3 Months Rs. 69 LacsTotal Capital Investment Rs. 2.22 Cr.Rate of Return 40%Break Even Point 47%*******************************************************

ALUMINIUM COMPOSITEPANELS (ACP) [EIRI-1489]

Aluminium Composite Panels (ACP) are mainlylight-weight composite material consisting oftwo pre-finished aluminium cover sheets heat-bonded (laminated) to a core made ofpolyethylene plastic material, available in 3mm,4mm and 6mm thicknesses after finishing andcan be curved and bent to form corners. Thesepanels are used widely as exterior covering ofcommercial buildings and corporate houses.While adding to aesthetic beauty of thestructure, they are also resistant to acid, alkalisalt spray, pollution and provide good thermalas well as sound insulation. These Panels arewidely used due easy maintenance in almostany kind of climate through normal wash withwater and mild detergent that ensures longlasting performance.

Cost EstimationPlant Capacity 6000 sq.mt./DayLand & Building (10,000 sq.mt.) Rs. 14.41 Cr.Plant & Machinery Rs. 3.94 Cr.W.C. for 2 Months Rs. 21.48 Cr.Total Capital Investment Rs. 40.54 Cr.Rate of Return 27%Break Even Point 54%*******************************************************

CATHETERS MANUFACTURING[EIRI-1490]

A catheter is a flexible tube made of latex,silicone, or Teflon that can be inserted into thebody creating a channel for the passage of fluidor the entry of a medical device. For many yearsthe epidermal catheters used were plain tubesmade of available industrial compounds, anddesign was largely based on current need.Catheters are designed to perform tissue

ablation (tissue removal) and even serve asconduits for thermal, optics, and various medicaldevices. The three major types of catheters arecoronary, renal, and infusion. Coronarycatheters are used for angiography (x-ray ofblood vessels after injection of radiopaquesubstance), angioplasty (altering the structureof a vessel) and ultrasound procedures in theheart or in peripheral veins and arteries.

Cost EstimationPlant Capacity 2000 Tubes/DayLand & Building (Area 1 Acre) Rs. 2.03 Cr.Plant & Machinery Rs. 3.73 Cr.W.C. for 1 Months Rs. 1.13 Cr.Total Capital Investment Rs. 8.27 Cr.Rate of Return 18%Break Even Point 69%********************************************************

FORMALDEHYDE RESIN (UREA,PHENOL, MELAMINE & THEIRMODIFIED RESINS) [EIRI-1491]

Approximately 1 million metric tons of urea-formaldehyde resin are produced annually. Morethan 70% of this urea-formaldehyde resin isused by the forest products industry for a varietyof purposes. The resin is used in the productionof an adhesive for bonding particleboard (61%of the urea-formaldehyde used by the industry),medium density fiberboard (27%), hardwoodplywood (5%), and a laminating adhesive forbonding (7%), for example, furniture casegoods, overlays to panels, and interior flushdoors. Urea-formaldehyde resins are the mostprominent examples of the class ofthermosetting resins usually referred to asamino resins.2,3 Cost EstimationPlant Capacity 30 MT/DayLand & Building (3 Acres) Rs. 7.52 Cr.Plant & Machinery Rs. 2.11 Cr.Total Capital Investment Rs. 14.73 Cr.Rate of Return 56%Break Even Point 36%***********************************************************

EPDM RUBBER PROFILES(WEATHER STRIPS,

INDUSTRIAL MONO STRIPS[EIRI-1492]

Ethylene Propylene Diene Monomer Rubber,also named as EPDM in short, is the polymerof ethylene and propylene. Large scalecommercial production began in 1963 and thecurrent overall global consumption of EFPM are800,000 tons per year. EPDM is polyolefine -categorized and has excellent performance ofvulcanization and its gravity is the lowest amongall rubbers. These are radon copolymers of thetwo hydrocarbons ethylene and propylene withthe ethylene varying from 40 to 70% by weight.This produces a saturated rubber, EPM, whichhas to be vulcanized with peroxide systems.

Cost EstimationPlant Capacity 3 MT./DayLand & Building (3000 sq.mt.) Rs. 3.96 Cr.Plant & Machinery Rs. 2 Cr.Total Capital Investment Rs. 8.60 Cr.Rate of Return 37%Break Even Point 43%

Hi-Tech Projects,Apr’16, www.eiriindia.org #09

Start Your Own Industry

EIRI Account HDFC BANKCA-05532020001279

(RTGS/NEFT/IFSC Code: HDFC0001981)

GRANITE CUTTING ANDPOLISHING UNIT [EIRI-1493]

Granite Slab and Tiles are used in building forthe purpose of wall paneling and for thedecoration of walls.

Cost EstimationPlant Capacity 8000 sq.ft./DayLand & Building (14457.6 sq.mt.) Rs. 6.07 Cr.Plant & Machinery Rs. 15.01 Cr.Total Capital Investment Rs. 31.86 Cr.*****************************************************

HDPE, PVC, LLDPE PIPES/TUBES & FITTING [EIRI-1497]

PVC is a thermosetting plastic. In other words,it can only be softened and molded into formonce. If it is softened and remolded a secondtime it will lose some of it’s favorablecharacteristics. PVC is very corrosion resistant.It is not a conductor and will not have anelectrochemical reaction with acids and basesthat it comes in contact with. For this reason,PVC is sometimes used to coat other materialsfor protection. PVC also has a high chemicalresistance. While it will react with somechemicals, there are a large number ofchemicals it will not react with, making it anexcellent product for industrial applications.PVC is not without it’s faults.

Cost EstimationPlant Capacity 5 MT./DayLand & Building (75,000 sq.ft.) Rs. 6.17 Cr.Plant & Machinery Rs. 1.38 Cr.Total Capital Investment Rs. 8.67 Cr.Rate of Return 25%Break Even Point 56%*******************************************************

PARTICLE BOARD FROM RICEHUSK [EIRI-1499]

The technology for manufacture of Rice HuskParticle Board, developed at the IndianPlywood Industr ies Research Institute,Bangalore, has emerged as one of the bestsolutions to this problem as it helps to maintainthe ecobalance and preserves the eco-system.Patents have been filed in India and many otherr ice growing countr ies. This board hasemerged as a versatile substitute for wood ina wide range of applications. Moreover, theseboards can also be made decorative. Theprocess has been licensed to several firms inIndia and a turnkey plant has been set up inMalaysia. The firm has also produced floortile (out of rice husk), fire resistant doors, etc.having granite like finish. What is more, thelicensee of the technology has helped to buildup a large number of low cost houses afterthe Gujarat earthquake.

Cost EstimationPlant Capacity 2 Ton/DayLand & Building (3000 sq.mt.) Rs. 3.08 Cr.Plant & Machinery Rs. 28 LacsTotal Capital Investment Rs. 4.50 Cr.Rate of Return 35%Break Even Point 66%*****************************************************

PLASTIC GRANULES FROMPLASTIC WASTE & PLASTIC

ROPE (SUTLI) PLANT[EIRI-1231]

Plastics today have a prominent place in thespectrum of materials frequently used bymaterials engineers and designers. They haveearned this placed on the basis of performanceat a price, plus the apparently unlimitedability of the plastics industry to develop newplastics or new grades of older plastics to meetspecific needs of modern industry.

Cost EstimationPlant Capacity 100 Kg/hr. Plastic Granules 100 Kg/hr. Plastic Rope (Sutli)Land & Building (2000 sq.mt.) Rs. 99 LacsPlant & Machinery Rs. 38 LacsTotal Capital Investment Rs. 1.81 Cr.Rate of Return 21%Break Even Point 67%******************************************************

IRON ORES PELLETIZATIONPLANT [EIRI-1170]

Iron Ore Pellets are used in blast furnaces forproducing sponge iron & steels. Marked byhigh productly lower fuel consumption andimproved furnace control, pellets are nowpreferred all over the world for primary steelmaking. An iron ore pelletization unit cansubmit an IEM to SIA of ministry of SteelIndustry to set-up a plant of mfg. capacity = 18lakh tonners pa. This project sould be 100%EOU/EOU or an ancillary to a sponge ironplant. This plant can be set-up near an iron oreconcentration site or a sponge iron plant or neara sea por t for respective benefits oftransportation costs saving on transfer of rawmaterials and /or finished products in betweenthe point of importance & the plant.

Cost EstimationPlant Capacity 500 MT./DayLand & Building (120000 sq.mt.) Rs.102.76 Cr.Plant & Machinery Rs. 35.36 Cr.W.C. for 2 Months Rs. 19.70 Cr.Total Capital Investment Rs. 160.97 Cr.Rate of Return 36%Break Even Point 40%*******************************************************

M.S. BILLET CASTING WITHINDUCTION FURNACE FROM

STEEL SCRAP & SPONGEIRON [EIRI-1058]

Mild steel Billets are the basic raw material formanufacturing various types of re-rolledproducts. Mild steel billets are used formechanical engineering works such asmanufacturing machines and their parts. Steelbillets are used for production of plate, sheets,strips, rod etc. by hot Rolling and cold Rollingprocess. It is the commercial forms of steelsmill products which are directly used in theEngineering Industries. A variety Additionaloperations like cold Rolling, Machining, HeatTreatments and Fabrications are carried outon final mill Products in order to make themsuitable for use. However, is the steel billets isthe first form of steel for producing other shapes

by rolling, forging or extrusion process.Cost Estimation

Plant Capacity 174 MT./DayLand & Building (2500 sq.mt.) Rs. 3.25 Cr.Plant & Machinery Rs. 1.38 Cr.W.C. for 3 Months Rs. 41.91 Cr.Total Capital Investment Rs. 46.88 Cr.Rate of Return 33%Break Even Point 44%******************************************************

BANANA CHIPS, BANANAPULP & BANANA POWDER

(BANANA PRODUCTS)[EIRI-1483]

Banana is a globally important fruit crop with97.5 million tones of production. In India itsupports livelihood of million of people. Withtotal annual production of 16.91 million tonesfrom 490.70 thousand ha., with nationalaverage of 33.5 T/ha. Maharashtra ranks firstin production with 60 T/ha. Bananacontributes 37% to total fruit production inIndia. Banana is one of the major andeconomical ly impor tant fruit crop ofMaharashtra. Banana occupy 20% areaamong the total area under crop in India.Maharashtra ranks second in area and firstin productivity in India. Jalgaon is a majorBanana growing district in Maharashtra whichoccupy 50,000 hectares area under Banana.But most of Banana is grown by plantingsuckers. The technology development inagriculture is very fast, it results in developingTissue Culture Technique.

Cost EstimationPlant Capacity 2.50 Ton./DayLand & Building (2000 sq.mt.) Rs. 88 LacsPlant & Machinery Rs. 63 LacsW.C. for 2 Months Rs. 1.02 Cr.Total Capital Investment Rs. 2.64 Cr.Rate of Return 31%Break Even Point 54%******************************************************

FUSED SILICA FROMSILICA SAND [EIRI-1481]

Fused silica is a high purity silicon dioxide iseither transparent or translucent. Thenontransparent fused material contains alarge number of microscopic bubbler thatcreate a milky appearance causes by thescattering of light. This material is sometimescalled as a translucent fused silica. Fusedsilica is available in a number of grade fordifferent application. Fused silica is used forwindow, lenses prism and other application.Fused silica should apply to any foam ofvitreous silica manufactured by fusion,however it has been used by some to denoteall vitreous silica not produced by quartzfusion and by other for only the translucentvitreous silica.

Cost EstimationPlant Capacity 40,000 MT./DayLand & Building (5 Acres) Rs. 13.10 Cr.Plant & Machinery Rs. 4.28 Cr.Total Capital Investment Rs. 26.79 Cr.Rate of Return 19%Break Even Point 71%

Hi-Tech Projects,Apr’16, www.eiriindia.org # 10

Top Industries to StartOT PASTE [EIRI-1478]

Wetting agent (OT Paste) used for textileindustry. Dioctyl sodium sulfosuccinate as OTPaste is a white wax l ike solid withcharacteristic odor. It is sparingly soluble inwater and freely soluble in alcohol, glycerol,Carbon tetrachloride, acetone xylene. Itsaponification value varies from 240-253 andis stable in acid and neutral solution. ithydrolyzes in alkaline solution. OT Paste isused as a wetting Agent in textile industries.OT Paste Wetting Agents is anionic product,thick paste, 0.5% of weight of cotton fiber orcloth instantaneously wets it. Industrial

Cost EstimationPlant Capacity 1 Ton./DayLand & Building (800 sq.mt.) Rs. 1.01 Cr.Plant & Machinery Rs. 22 Cr.W.C. for 3 Months Rs. 65 Cr.Total Capital Investment Rs. 1.93 Cr.Rate of Return 26%Break Even Point 54%*******************************************************

TOMATO PROCESSING UNIT[EIRI-1022]

Tomato processing unit/Tomato Puree is thename implies to tomato Pulp which isconcentrated by the evaporators either openpan or vacuum evaporators. It is prepared byconcentrating tomato juice or pulp withoutseeds and skin. It is used for preparation ofvarious products such as Sauces, Ketchup,Chutney, Soup, Tomato Juice. Tomatoes aretaken, which are well-ripened. So the freshripen tomatoes are very refreshing andappetising. they are good source of vitamine.The main tomato producing states are A.P.,Bihar, M.P. Punjab, Tamil nadu, West Bengaland Maharashtra. Two varieties of tomatoesare available in India then are the large roundones which are quite sour and the tongishtype which are sweetish and less sour.

Cost EstimationPlant Capacity 20000 MT./YearLand & Building (3000 sq.mt.) Rs. 1.71 Cr.Plant & Machinery Rs. 6.89 Cr.W.C. for 1 Months Rs. 1.19 Cr.Total Capital Investment Rs. 10.09 Cr.Rate of Return 23%Break Even Point 58%******************************************************

HARD ANODISED PRESSURECOOKERS AND UTENSILS

[EIRI-1023]Pressure Cookers are conventionally madeof Aluminium Alloys sheet or Circles. InRecent years stainless steel has penetratedinto this field. As stainless steel is notthermally so efficient as Aluminium, the latesttrends towards manufacture of PressureCookers with Copper clad bottom of pressurecookers. In every family utensils of differentmetals are used made of steel, Brass,Aluminium, Copper etc. More over utensilsof every metals has a definite significance ofits own but aluminium utensils are especiallyused by lower class people Because It is light,quite reasonable and with high heat bearing

capacity. Because of these physical qualitiesand durability, Aluminium utensils have highdemand and its demand is only increasing witheach passing day with the increase inpopulation, Although the major demand foraluminium utensils is in rural area, yet itspopularity is also increasing in urban areas.

Cost EstimationLand & Building (Area 500 sq.mt.) Rs. 87 LacsPlant & Machinery Rs. 45 LacsW.C. for 3 Months Rs. 2 Cr.Total Capital Investment Rs. 3.41 Cr.Rate of Return 75%Break Even Point 38%****************************************************

FRUITS AND VEGETABLESDRYING BY FREEZE DRYING

METHOD [EIRI-1039]The modern method of dehydration, i.e. dryingfruits and vegetables under controlledconditions of temperature and humidity ishowever, assuming importance as a majorindustry. The dehydration industry got animpetus during the World War II. On accountof their concentrated form, low cost,convenience and easy transportability, driedfruit and vegetable products and also otherdehydrated foods became highly popularamong the armed forces. Dehydratedvegetables, however, lost some of theirpopularity owing to some undesirable changesin colour, taste and flavour during storage anddistribution.

Cost EstimationPlant Capacity 1.50 Ton./DayLand & Building (Area 2 Acres) Rs. 5.31 Cr.Plant & Machinery Rs. 5.85 Cr.W.C. for 3 Months Rs. 1.26 Cr.Total Capital Investment Rs. 12.67 Cr.Rate of Return 60%Break Even Point 31%****************************************************

STEEL ROLLING MILL (BYINDUCTION FURNACE) [EIRI-1041]

The products of steel plants are in the form ofstructural shapes such as I-sect ions,channels, angles, plates, rails, sheets, axlesand wheels for railways, merchant productslime rounds, hexagons, squares, strips etc.Galvanized sheets, tin-plates, wire-rods andsoon. Rails, wheels and axles are specificallymeant for railways which are a large consumerof steel. These are specifically used directlyas supplied by steel plant. However, theremaining products of a steel plant, by andlarge, are processed further in engineeringindustries before their actual use. Theseproducts are therefore often called as ‘Semis’meaning thereby that they are semi-finishedsteel products only.

Cost EstimationPlant Capacity 350 MT./DayLand & Building (50,000 sq.mt.) Rs. 54.70 Cr.Plant & Machinery Rs. 5.77 Cr.W.C. for 2 Months Rs. 58.88 Cr.Total Capital Investment Rs. 120.06 Cr.Rate of Return 49%Break Even Point 42%*****************************************************

POLY ALUMINIUM CHLORIDE[EIRI-1018]

Aluminium chloride hydroxide [1327-41-9],[10284-64-7], Alcl (OH)2 [14215-15-7],AlCl2(OH), produts, commonly known aspolyaluminium chlorides (PAC), are used fora wide variety of industrial applications. Othernames for PAC are basic aluminium chloride,polybasic aluminium chloride, aluminiumhydroxychlorid, aluminium oxychloride andaluminium chlorohydrate. The presence ofpolymeric, aluminium-containing cations, thedistribution of which can differ greatly, typifiesPAC products. Although the formation ofpolynuclear aluminium species in solution hasbeen studied for over a centary, there is stillmuch controversy concerning aluminiumpolymerization reactions and the resultingproduct compositions. Polyaluminiumchloride is a partially hydrolyzed aluminiumchloride solution, which may incorporate asmall amount of sulphate, has beenintroduced in Japan, England and Australiaas an alternative to alum. Known aspoly(aluminium chloride) or poly (aluminiumhydroxy chloride is a member of the family ofbasic aluminium chlorides. Polyaluminumchloride is also called Aluminium chlorideHydroxide [1327-11-9].

Cost EstimationPlant Capacity 1.50 MT./DayLand & Building (1000 sq.mt.) US$ 1.78 LacsPlant & Machinery US$ 1.40 LacsW.C. for 2 Months US$ 1.13 LacsTotal Capital Investment US$ 4.56 LacsRate of Return 25%Break Even Point 61%****************************************************

BOTTLING PLANT (COUNTRYLIQUOR) [EIRI-1233]

There are nevertheless several very earlyreferences which can be taken to indicate thata potable spirit (like country liquor) was knownmany thousands of years ago. The earliestregarding excessive consumption of potabledistilled spirit, i.e. country liquor and otherproducts, appear to have come from China,some 1000 years B.C. Aristotle later mentionspurifying sea water by evaporation, and also“wine which produces a spirit”. For centuriesthe art of distilling remained firmly in thehands of alchemists. Herbs had long beenthought to cure various maladies, agriurdulyfor Jaundice, fox glore, for blisters and it wouldseem that the alchemists argued that, if thejuice of one of these herbs could be, say,quadrupled in strength, then the efficiency ofcure would be multiplied four fold. Thealchemists were responsible for manyimprovements in the art of distilling.

Cost EstimationPlant Capacity 10000 Ltrs./DayLand & Building (1.52 Acres) Rs. 2.11 Cr.Plant & Machinery Rs. 1.20 Cr.W.C. for 1 Months Rs. 1.31 Cr.Total Capital Investment Rs. 4.89 Cr.Rate of Return 52%Break Even Point 38%***************************************************

To get Loan/Finance from Banks/Finacial Institutes.

To set up your own Industry/Unit

To have Detailed & Exhaustive Data on any Project.

A complete List of Industrial Project Reports are given on www.eiribooksandprojectreports.com

EACH DETAILED PROJECT REPORT CONTAINS:INTRODUCTION : Project Mix, Uses & Applications, Quality Control Measure & Their Introduction for Attaining RequiredProperties Economy & Productivity Competence.

MARKET SURVEY : Market Position, Installed Capacity Production, Anticipated Demand, Present Manufacturers,Statistics of Imports & Exports, Estimated Demand, Demand & Supply Gap (If available), LI/IL Issued Recently

PROCESS OF MANUFACTURE : Inventory Controls & Tests, Comparative Study of Process for Manufacturing theProduct, Formulations, Process Flow Sheet Diagram, Process Detail in Stages from Raw Materials to Finished Products

RAW MATERIALS : Raw Material Specifications, Market Codes & Raw Material Prices, Sources of Procurement ofRaw Materials [Imported/Indigenous]

PLANT & MACHINERY : Range of Machineries Required, Detailed Specifications of Machines & Equipmants, Pricesod Machineries, Suppliers of Plant and Machineries.

LAND & BUILDING : Total Land Area Requirement with Rates, Covered Area Break-up with Estimated Costs ofConstruction

PROJECT ECONOMICS : Land & buildings, Plant, Machinery & Other Fixed Assets, Total Capital Investment, WorkingCapital Assessment, Raw Material & Consumable Stores, Staff Salaries & Wages, Utilities & Overheads, Total Cost ofProject, Sources of Finance/Refinance, Break Even Point Determination.

* EIRI Project Reports are prepared by highly qualified & experienced consultants &Market Research and Analysis supported by a panel of Experts and Computerised.

* Data provided are reliable and uptodate collected from manufacturers/suppliers, plantalready commissioned in India.

EIRI Technocrats and Engineers have just prepared“MARKET SURVEY CUM DETAILED TECHNO ECONOMIC FEASIBILITY REPORTS”

on following lucrative products which are most viable and profitable and having bright future scope

For assessing Market Potential, Corporate Diversifications,Planning, Investment Decision Making and to start your own setup,Entrepreneurs and Industrialists are most welcome to contact EIRI.

* COPPER SULPHATE FROMCOPPER ASH/SCRAPCHELATED ZINC (ZN-EDTA)12%

* ORTHOPAEDIC IMPLANTSAND INSTRUMENTSBARLEY MALT

* MINERAL TURPENTINE OIL(M.T.O.) FROM PETROLEM(SUPERIOR KEROSENE OILOR OTHER MATERIAL)

* M.S.FASTENERS AND S.S.FASTENERS

* P.V.C. COMPOUNDING(FRESH) FOR CABLES ANDPVC PIPES

* BANANA FIBRE EXTRACTIONAND HAND MADE PAPERBANANA & ITS BY

PRODUCTS* COLOUR AND ADDITIVES

MASTERBATCHES* METALLIC STEARATE* SURGICAL METHYLATED

SPIRIT* KHADSARI SUGAR (500 TCD)* COTTON (RUI) FROM WASTE

COTTON CLOTH* LAUNDRY & DRY CLEANERS* COATED YARN* TOUGHENED GLASS* CAUSTIC SODA (SODIUM

HYDROXIDE) (NaoH)ELECTROLYTIC PROCESS

* PLASTIC WASTE RECYCLINGUNIT & PYROLYSIS PLANTFROM PLASTIC AND RUBBERWASTE (INTEGRATED UNIT)

* CHITIN & CHITOSAN FROMPRAWN SHELL WASTE

* PASTA PRODUCTION PLANT(SHORT PASTA)

* SODIUM HYDRO SULFITETHROUGH FORMALDEHYDEROUTE CAP-20 TPD

* SODA ASH PLANT FROMSOLVAY PROCESS

* ONION, AND GARLICPOWDER WITH GRAPEDEHYDRATION (RAISINS)

* FLUSH DOORS* DI-METHYL PHTHALATES

(DMP)* GLUTEN FREE BEER

* PVC AND PP FILES ANDFOLDERS

* SULFAMIC ACID PURECRYSTAL AND OTHER GRADE(GP,SR & TM GRADE)

* DECORATIVE LAMINATEDSHEET (SUNMICA)

* ALPHA CELLULOSE POWDERFROM COTTON WASTE

* CAST POLY PROPYLENEFILMS ( CPP FILM)

* CASHEW NUT PROCESSING* BIOGAS PRODUCTION (1500

CUBIC METER PER DAY)* SOYA MILK AND PANEER* MINERAL TURPENTINE OIL

(MTO)

EIRI is an expertIndustrial Consultantworking over 35 years

and specialized toprepare all types ofDetailed Project

Reports based onclients requirements.Do Contact Today at:

eiritechnology@gmail.com

Hi-Tech Projects,Apr’16, www.eiriindia.org # 11

Hi-Tech Projects,Apr’16, www.eiriindia.org # 12

* STEEL FABRICATION* STEEL ROLLING MILL

(REINFORCEMENT BAR)* ACRYLIC BATH TUB BY

ACRYLIC SHEET* FABRICATION OF HEAT

EXCHANGER* KITCHEN PRODUCTS

MADE OF STAINLESS STEEL* ALUMINIUM BEVERAGE CAN* STEEL ROLLING MILL (BY

INDUCTION FURNACE FROMSTEEL SCRAP & SPONGIRON

* M.S. BILLET CASTING WITHINDUCTION FURNACEFROM STEEL SCRAP &SPONGE IRON

* PROCESSING OF LOWGRADE TUNGESTEN OREFULL BODY & CHASSISSBUS PLANT

* ASSEMBLY OF AIR –CONDITIONER/CHESTFREEZER/REFRIGERATOR

* G.I.LADDER & PERFORATEDTRAYS

* ALUMINIUM DOORS &WINDOWS (ALUMINIUMFABRICATION)

* LEAF SPRINGS FORTRACTOR DRAWNTROLLEYS & FOURWHEELER TEMPOS

* STEEL BRIGHT BARS* AUTOMOTIVE ENGINE VALVE* AUTOMOTIVE BRAKING

SYSTEM* DISPLAY COOLER* ERW STEEL PIPES & TUBES* STEEL INGOTS* TMT STEEL BARS (SARIYA)* AUTOMOBILE TRACTORS* ACTIVATED ALUMINA BALLS* ALUMINIUM FOIL* STONEWARE PIPE

(S.W.PIPE)/ CLAY PIPE* IRON ORE PELLETIZATION* ELECTRIC CONTROL PANEL* SOLAR PV POWER PLANT* MACHINE SHOP (FOR OIL

AND GAS ENGINEERINGINDUSTRY, AEROSCAPEENGINEERING INDUSTRY)

* STEEL BRIGHT BARS* CEILING FAN* COPPER STRIP COILS FROM

SCRAPS* PRODUCTION OF PV

PANELS (SOLAR PV PANELS)* ROTARY AIR LOCKS, SCREW

CONVEYOR, MOTORIZED/PNEUMATIC DAMPER, FLAPVALVES, AIR SLIDESREQUIRED IN CEMENTPLANTS AND THERMALPOWER PLANT

* ALUMINIUM EXTRUSION

* ALUMINIUM COIL COATINGFOR ACP AND ROOFING IND.

* PAVING BLOCK* WIRE NAILS* TMT STEEL BARS* FASTENERS/NUT & BOLTS

(INDUSTRIAL &AUTOMOBILE)* HYDRAULIC CYLINDERS* DISPOSABLE SYRINGES

WITH NEEDLE PLANT* FABRICATION UNIT

(PRESSURE VESSEL,REACTOR VESSEL &AGITATORS, HEATEXCHANGERS) & SEAMLESSPIPES AND TUBES

* COPPER POWDER FROMCOPPER SCRAP

* STONE CRUSHER* PRODUCTION OF ALL

TYPES OF FANS SUCH ASAXIAL FANS,CENTRIFUGALFANS (SMOKE EXTRACTFANS & FRESH AIR SUPPLYFANS), BATHROOM FANSETC.

* STONE MINING* MAHINDRA CAR

DEALERSHIP WITHAUTOMOBILE SERVICESTATION/GARAGE

* AUTO FILTERS (AIR FILTERS,OIL FILTERS & FUEL FILTERS)

* AAC & ACSR ALUMINIUMCONDUCTORS

* MANGANESE ORE JIGGING* STEEL TRANSMISSION LINE

TOWERS AND ROLLING MILLTO PRODUCE STEELSECTIONS

* FERRO SILICON (FROMMINERAL INGREDIENTS)STAINLESS STEEL TUBES

* M.S.FASTENERS ANDS.S. FASTENERS

* PREFABRICATED STEELFRAMED BUILDINGMANUFACTURING PLANT

* LEAD ACID BATTERY* GALVANISED WIRE* POWER TRANSFORMER

(50 KVA TO 2000 KVA)* M.S. PIPE* GALVANISED IRON SHEETS* M.S.BILLETS* STEEL GRATING

(GALVANISING ELECTROFORGED STEEL GRATING)

* ALLOY WHEELS PLANT* ESTABLISHMENT OF

MANUFACTURING OFREFRIGERATING APPLIANCE

* WELDED WIRE MESH* ALUMINIUM COLD

ROLLING MILL FORSHEETS & CIRCLES

* ALUMINIUM ROLLINGMILL FOR MANUFACTURINGALUMINIUM CIRCLES

REQUIRED FORPRESSURE COOKERS,NON STICK COOKWARES& CIRCLES

* LPG CYLINDER* ALUMINIUM COMPOSITE

PANNELS* DEEP FREEZER

ENVIRONMENTALCLEARANCE FOREXPANSION OF INGOTS/BILLETS PLANT

* FERRO SILICON BYSMELTING PROCESS

* ALUMINIUM CONDUCTOR* PRESTRESSED

CONCRETE POLES* FASTENERS (NUT & BOLT)

USED IN OIL AND GAS* ALUMINIUM ALLOY PLANT* STAINLESS STEEL SINKS* ALUMINIUM ALLOY PLANT* P.V.C BATTERYSEPARATOR* AUTOMOTIVE TYRE AND

TUBE VALVES (VALVESMANUFACTURING)

* PRESSURE COOKWAREALUMINIUM, STAINLESSSTEEL & HARD ANODIZED

* ELECTRIC WATER HEATER* SOLAR WATER HEATER

DOMESTIC & INDUSTRIAL* CORRUGATED

COLOURED ROOFINGGALVANISED IRON SHEET

* PRESSURE DIE CASTING* G.I.WIRE AND BARBED

WIRE* G.I.WIRE & M.S. BINDING

WIRE* HOT DIP GALVANIZING

PLANT FOR STRUCTURALSTEEL AND PIPES

* COLD ROLLING MILL* DOOR HINGES (MILD

STEEL AND STAINLESSSTEEL)

* PRESSURIZED AEROSOLS(LIKE BODY SPRAYS,PERFUMES, SHAVINGFOAM AND SHAVING

LOTIONS ETC.)* ANHYDROUS SODIUM

DITHIONITE PRODUCTION(SODIUM FORMATEPROCESS)

* SODA ASH PLANT (FROMSOLUTION BRINE)

* SISAL FIBREREINFORCED

* CEMENT ROOFING SHEET* HIGH ALUMINA

REFRACTORY BRICKPLANT

* CATHETERSMANUFACTURING

* SURGICAL RUBBERDISPOSABLE GOODS

* POULTRY AND HATHERYFARMING

* MILK PROCESSING PLANT* ROASTED, SALTED ALMONDS,

PEANUTS FOR PACKING IN25g, 50g,250g & 500g SACHET-S

* BEER FROM POTATOES* GUAR GUM POWDER* AUTOMATIC WHITE BREAD

MAKING PLANT* AUTOMATIC BISCUIT MAKING

PLANT* FROZEN FOOD BY IOF

TECHNOLOGY* WALNUT PROCESSING PLANT* WHIPPING CREAM FRUITS &

VEGETABLES POWDER UNIT(EXPORTS ORIENTED UNIT)

* NATURAL MEDICINE &RESEARCH INSTITUTEWITH 150 BEDS HOSPITAL

* PACKAGED DRINKING WATER(PACKED IN 330 ml CUP, 500MLBOTTLE, 1500 ML BOTTLE AND20 LTR. JAR)

* COLD STORAGE(CONTROLLED ATMOSPHEREOR CA) FOR POTATO CAP:1,00,000 BAGS (50 Kg/Bag),STORING CAP: 5000 Mt,SOLVENT EXTRACTION& REFINING (SOYABEAN) (Cap-250mt/day & 50mt/Day oilRefining)

* BOTTLING PLANT (WHISKY,BRANDY, RUM, VODKS, GIN)FROM RECTIFIED SPIRIT/ENALUBE OIL BLENDING ANDGREASES PLANT

* COLD STORAGE FOR POTATO1,00,000 BAGS (50 KG/BAG)

* MAIZE FLOUR & BY PRODUCTMANUFACTURING PLANT

* CUT FLOWER (GLADIOLI,MARIGOLD, STATICE,CHRYSANTHEMUM ROSEWITH GREEN HOUSE)

* CATTLE FARMING ANDDAIRY PRODUCTS

* COLD STORAGE FORPOTATOAND OTHER HORTICULTUREPRODUCTS Cap:- 5000 Mtor 100000 Bags (50 Kg/Bag)

* DEXTROSE PLANT* SBR RUBBER SHEETS AND

SHOE MANUFACTURING* CASHEW NUT PROCESSING* PLYWOOD AND PLYBOARD

PARTICLE BOARD ANDLAMINATED PARTICLE BOARD

* VENEER MAKING, PLYWOOD& PLYBOARD MAKING

* WALNUT & PINUS(CHILGOZA)OIL, SHELL POWDERPROCESSING PLANT

* COUNTRY LIQUOR BOTTLINGPLANT (1,00,000 BOTTLES/DAY)

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

Hi-Tech Projects,Apr’16, www.eiriindia.org # 13

* PLASTIC GRANULES FROMPLASTIC WASTE

* ROPE AND SUTLI MAKINGPLANT

* BOTTLING PLANT (COUNTRYLIQUOR) 10,000 LTRS./DAY)

* I.V. FLUID (FFS OR BFSTECHNOLOGY)

* TOXIN PAN MASALA,TOBACCO LESS GUTKHAAND ZARDA

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* UPVC DOORS & WINDOWSFABRICATING PLANT (Fixingand Installation of Door andWindows of uPVC profiles)

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* MUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)

* MEDICAL COLLEGE WITH750 BEDS HOSPITAL FACILITY

* MICRO IRRIGATIONPRODUCT MANUFACTURINGPLANT

* HOT DIP GALVANIZINGMUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)CEMENT TILES, CANAL LINESLAB, KERV STONE, PAYERRCC PIPE, MANOHOLECOVER,ENTERLOCKING ETC.MANUFACTURING PLANT

* MEDICAL COLLEGE (100STUDENT INTAKECAP. MEDICAL COLLEGEWITH 500 BED HOSPITAL)

* ESTABLISHMENT OF APRIVATE UNIVERSITY

* DIGITAL INKS* GALVANIZING PROCESS

PLANT FOR ELECTRICALPOLES

* MAIZE PROCESSING PLANT* STARCHES / MODIFIED

STARCHES/ LIQUID GLUCOSE/ DEXTROSE MONOHYDRATE/GLUCOSE SYRUPS / CORNSYRUP SOLIDS / HIGHMALTOSE CORN SYRUPS /MALTO DEXTRINE POWDER /CORN GLUTEN MEAL (60%)MAIZE OIL / SORBITOL.

* BABY CARE PRODUCTS* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* BOTTLING OF WHISKY* UPVC DOORS & WINDOWS

PROFILES* EPDM RUBBER PROFILES* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* FAST FOOD RESTAURANT

WITH CENTRALLISEDKITCHEN

* READY MADE GARMENT(T-SHIRT/POLO GOLFER/WOVEN SHIRTING & SUITINGFOR UNIFORMS/SWEATERS)MANUFACTURING

* BIO-DIESEL EXTRACTIONFROM JATROPHA,SOYABEAN, SUNFLOWER,RICE BRAN, ALGE &CULTIVATION OF JATROPHA

* FAST FOOD RESTAURANTCHAIN WITH CENTRALLISEDKITCHEN

* GUAR SPLIT POWDER ANDOTHER BY PRODUCTS

* SOLVENT EXTRACTIONPLANT (COTTON SEED)

* RASGULLA MANUFACTURINGAND CANNING

* CULTIVATION OF RICE &WHEAT COMMERCIAL &MECHANISED DEVELOPMNT

* MAIZE & BY PRODUCTSPROCESSING -STARCHMODIFIED STARCHES/LIQUIDGLUCOSE/DEXTROSEMONOHYDRATE/GLUCOSESYRUPS/CORN SYRUPSOLIDS/HIGH MALTOSECORN SYRPS/ MAITODEXTRINE POWDER/CORNGLUTEN MEAL (60%) MAIZEOIL/SORBITOL

* TEAK FARMING* ARTIFICIAL MARBLE

(SYNTHETIC)* POTATO STARCH CARDANOL

FROM C.N.S.L. (CASHEWNUTSHELL LIQVID

* INTEGRATED SCRAP YARD* POTATO STARCH* MANGO PULP (5 TON/HOUR

200 KG ASEPTIC PACKAGING)* BOTTLING PLANT (WHISKY,

BRANDY, RUM, VODKA, GIN)FROM RECTIFIED SPIRIT/ENA

* COW DAIRY FARMING(AYRSHIRE/HOLSTEIN) ANDMILK PROCESSING MILK/DAYCAP-50,000 LTR/DAY

* WHEAT FLOUR MILL* CHAKKI FLOUR MILL* I.V. FLUID (FFSTECHNOLOGY)* LIQUID GLUCOSE FROM

POTATOES* SORBITOL FROM MAIZE

STARCH* WALNUT PROCESSINGPLANT* SOLVENT EXTRACTION AND

OIL REFINERY CUM PACKINGOF RICE BRAN OIL

* COTTON SEED OIL SOLVENTEXTRACTION PLANT

* MARINE TRAINING INSTITUTE& PLACEMENT SERVICEPROVIDING AGENCY

* I.V.FLUID (FFS TECHNOLOGY)* CERAMIC FIBERS, CERAMIC

FIBRE BLANKET, CERAMICFIBRE BOARD AND CERAMICFIBRE ROPE

* COLD SUPPLY CHAIN* LAMI TUBE MANUFACTURING* EYE DROP 3 PIECES

(PLASTIC VIALS)* PET BOTTLES (CAMBER/

CLEAR IN COLOUR) CAP:15ML,60ML 100ML,135ML,200ML & 500ML

* BENZYL ALKONIUMCHLORIDE (BKC)

* NATURAL SUGAR WAX* MARGARINE BUTTERFROM

VEGETABLE OIL* GREEN HOUSE FOR CROP

PRODUCTION* ORGANIC DAIRY FARMING* E-WASTE* BIO-DIESEL FROM ALGAE* VANADIUM PENT OXIDE

GRAPHITE MINING ANDBENEFICIATION PLANT

* VITAMIN WATER* PET PREFORM CUM PET

BOTTLES* ORGANIC DAIRY FARMING

AND PRODUCING WHOLEMILK POWDER (WMP)

* HDPE BOTTLES* CAUSTIC SODA FROM

SODIUM CHLORIDE* COAL TAR PITCH* MOSQUITO REPELLANT* WRIST BAND* CASTOR OIL AND ITS

DERIVATIVES OLEO RESIN,TURKEY RED OIL, DCO, HCO,SEBACIC ACID, 12-HYDROXYSTEARIC ACID

* PAPAIN FROM PAPAYA* PROCESSED CHEESE* MONOCHLOROBENZENE* EUGENOL FROM CINNAMON

OIL* SULPHUR 80% WDG* CERAMIC FIBERS,

CERAMIC FIBRE BLANKET,CERAMIC FIBRE BOARDAND CERAMIC FIBRE ROPE

* SCREEN PRINTING* DI CALCIUM PHOSPHATE

FROM ROCK PHOSPHATE& HAIFA PROCESS

* PVC FLEXIBLE PIPE* FLEX BANNER USED IN

DIGITAL PRINTING* PIGMENTS BINDERS FOR

TEXTILE PRINTING* POULTRY & HATCHERY FARM* ALOEVERA JUICE AND GEL* LIME PUTTY* AUTOMOBILE WORKSHOP/

GARAGE* EGG TRAY FROM PULP* CARDANOL FROM C.N.S.L.* OXYGEN GAS

* POLYALUMINIUM CHLORIDE* NAMKEEN INDUSTRY

(BHUJIA, CHANACHUR ETC.)* POLYOL USED FOR

POLYURETHANES* POLYSTYRENE POLY

PROPYLENE OXIDE* DIETHYL PHTHALATE* UREA FORMALDEHYDE AND

MELAMINE* FORMALDEHYDE MOULDING

POWDER* INSTANT COFFEE* ANNATTO SEED COLOUR

EXTRACTION* FRUITS AND VEGETABLES

DRYING BY (FREEZE DRYINGMETHOD)

* BIO GAS PRODUCTION ANDBOTTLING PLANT

* JAM, JELLIES, FRUIT JUICEAND ALLIED PRODUCTSMATERNITY NURSING HOME

* CANNING & PRESERVATIONOF VEGETABLES

* CURCUMIN & TURMERIC OILFROM TURMERICDETERGENT WASHINGPOWDER (ARIEL TYPE)

* GRANITE SLAB AND TILES* TEA PACKAGING* PAN MASALA & GUTKHA* PRESTRESSED CONCRETE

ELECTRIC POLES* LEATHER SHOES* ROTOGRAVURE PRINTING

(FOR FLEXIBLE PACKAGING)* AUTOCLAVED AERATED

CONCRETE BLOCKS* OXYGEN AND NITROGEN

GAS PLANT* MANGANESE ORE

BENEFICATION* MINERAL WOOL* CALCIUM SILICATE* TOUGHENED GLASS* HUMIC ACID* OFFSET PRINTING UNIT

(5 COLOUR)* CASTOR OIL AND ITS

DERIVATIVES OLEORESIN* TISSUE PAPER PULPING

FROM SAW DUST* KNITTED GLOVES* RADIATOR COOLANT* LATEX FOAM RUBBER

(SPONG RUBBER)* GARLIC OIL AND POWDER* ACTIVATED CARBON &

SODIUM SILICATE FROMPADDY/ RICE HUSK

* TRIETHYLENE GLYCOL* RAMMING MASS* WOOD PEELING &

VENEER MAKING* PETROLEUM JELLY* DAIRY FARM (COW &

BUFFALO) TO PRODUCE

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Hi-Tech Projects,Apr’16, www.eiriindia.org # 14

MILK & PACKAGING INPOUCHES

* CUTTING OIL LIQUID GOLD(IN PASTE FORM)

* P.V.C. LEATHER CLOTH(REXINE)

* COAL TAR DISTILLATION* ALUMINIUM LABEL PRINTING* FOLDING CARTNS/MONO

CARTONS* SURGICAL DISPOSABLE

GLOVES (DIPPED RUBBERGOODS)

* AGRICULTURAL CHEMICAL(PLANT GROWTH PROMOTERAND PLANT GROWTHREGULATOR)

* MENTHOL BOLD CRYSTALSFROM MENTHOL FLAKES

* ORGANIC FARMING* CORRUGATED

POLYCARBONATE SHEET* COLD STORAGE* FLAT PVC LAMINATED* SAFTY GLASS/TOUGHENED

GLASS* PLASTIC GRANULES FROM

WASTE* DRY WALL PUTTY (WHITE

CEMENT BASED)* CHARCOAL BRIQUETTE* OXALIC ACID FROM

MOLASSES* POTATO GRANULES* SANITARY NAPKINS & BABY

DIAPERS* CORRUGATED BOXES* PLASTER OF PARIS* RUBBER ROLLER FOR

PRINTING MACHINE* LACTIC ACID* EMERY PAPER (SAND PAPER)* RUBBER RECLAIM SHEET

FROM USED BUTYL TYREAND TUBE

* MANGO PULP* PARTICLE BOARD FROM

BAGASSE AND RICE HUSK* TOILET PAPER & NAPKINS* TENDER COCONUT WATER* CALCIUM CARBONATE* LIME CALCINATION PLANT* INJECTION MOULDED

PLASTIC COMPONENTS* HYDRATED LIME* BLACK PEPPER* MULTIAXIAL GLASS FABRIC* LIQUID TOILET CLEANER

(HARPIC TYPE)* LIME & PRECIPITATED* CALCIUM CARBONATE* LIQUID GLUCOSE FROM

BROKEN RICE

* MEDICAL DISPOSABLEPLASTIC SYRINGES

* METAL POLISHING BAR* SANITARY NAPKINS & BABY

DIAPERS* PERFUMES/ATTAR* GEMS AND JEWELLERY* MULTIAXIAL GLASS FABRIC* ACTIVE ZINC OXIDE* COPPER PHTHALOCYANINE* TURMERIC OIL EXTRACTION

FROM DRY TURMERIC* CNSL BASED RESIN IN

LIQUID & POWDER FORMBOPP FILM

* BETA IONONE* BIO-FERTILIZER* ZINC & COPPER SULPHATE* PAPER BASED PHENOLIC

SHEET (FOR ELECTRICALAPPLIANCE)

* THINNERS (WHITE SPIRITBASED)

* SINGLE SUPER PHOSPHATE& SULPHURIC ACID

* MONO CALCIUM PHOSPHATE& DI-CALCIUM PHOSPHATE

* FLEXIBLE P.U. FOAM* ASPIRIN* SORBITOL FROM MAIZE

STARCH* SPICE OIL & OLEORESIN* ANTI-FOAMING AGENT

(SILICONE BASED) FORDISTILLERY, SUGAR, PAPERPLANT ETC.

* LAUNDRY & DRY CLEANER* BRICKS FROM STONE DUST* CARBOXY METHYL STARCH* TITANIUM DIOXIDE* UNDECYENIC ACID* PSA BASED NITROGEN

GENERATOR* SYNTHETIC IRON OXIDE* PVC INSULATION TAPE* TAMARIND KERNEL POWDER* ORGANIC CHEMICAL &

SOLVENTS* PLASTICIZERS* ICE PACK (SOLUTIONS

TYPE, VIOLET-SEMI SOLIDPOLYMER TYPE)

* GUM FROM TAMARIND* PEARL SUGAR CANDY

(MISHRI)* GOAT & SHEEP FARMING* GYPSUM PLASTIC BOARD

(AUTOMATIC PLANT)* NON-WOVEN INDUSTRY

(CARRY BAGS, SURGICALGOWN, FACE MASK, ROUNDCAPS, SHOE COVER, GLOVE)

* COTTON SPINNING, SIZING,

YARN, DYEING & WEAVING* CALCIUM CHLORIDE* AMINES & ALLIED PRODUCT* SPINNING COTTON* SILICONE FROM RICE HUSK* ADHESIVE (FEVICOL TYPE)* CAUSTIC SODA FROM

ELECTROLYSIS* CAMPHOR TABLETS* CERAMIC GLAZED WALL

AND FLOOR TILES* ZINC SULPHATE MONO* ETHANOL (BIO FUEL)

FROM RICE STRAW* GYPSUM MOULDING AND

GYPSUM BOARD* SMOKELESS COAL* ACID (SILICA) AND BASIC

RAMMING MASS* UNSATURATED

POLYESTER RESINS* DAIRY (BUFFALO) FARMING

SILICONE FROM RICE HUSK* N-ACETYL THIOZOLIDINE-

4-CARBOXYLIC ACID (NATCA)* PE BASED CARBON BLACK

COMPOUND* ONION DEHYDRATION* PVC PIPES & FITTING* GLASS REINFORCED* GYPSUM MOULDINGS

ABSORBENT COTTON &SURGICAL BANDAGES

* CALCIUM STEARATE BYFUSION PROCESS

* MANGO POWDER & OTHERFREEZE DRIED PRODUCTS

* MENTHOL OIL FROMLEAVES AND MENTHOL

* CRYSTALS (PEPPERMINT)MANUFACTURE OFCELLULOSE ACETATE

* ANTIFOAMING /DEFOAMING AGENT

* ALOEVERA CULTIVATION &PROCESSING

* SYNTHETIC MAGNESIUMSILICATES

* EPHEDRINEHYDROCHLORIDE

* ACTIVATED BLEACHNGEARTH

* TECHNICAL TEXTILES* FORMALIN FROM

METHANOL* CATIONIC SOFTNER

(STEARIC ACID BASED)* PRECIPITATED SILICA* PU BASED FOOT WEARS* FORMALDEHYDE RESIN

(UREA, PHENOL, MELAMINE)* HDPE MONO FILAMEN NET* POTATO & ONION FLAKES

* DUSTLESS CHALK(SCHOOL CHALK)

* TOMATO POWDER* BIODEGRADABLE /

COMPOSTABLE PLASTICS* ACRYLIC CO POLYMER

EMULSION* ESTER GUM (FOOD GRADE)* PROTEIN BASED FOAMING

AGENT* LECITHIN (SOYA BASED)* SOYA OIL AND CATTLE

FEED FROM SOYABEAN

* COMPARISON BETWEENFLY ASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* CELL CAST ACRYLICSHEET

* ACRYLIC BATH TUB ANDSHOWER TRAY

* THERMOCOLE BASEDDISPOSABLE PLATES

* SODIUM SILICATE FROMRICE HUSK

* ETHYL METHACRYLATE* SODIUM LAURYL ETHER

SULPHATE* LATEX GLOVES,

CONDOMS & CATHETER* CALCIUM NITRATE

GRAIN BASED ALCOHOLDISTILLERY

* BULK DRUGS* MARBLE QUARRYING* CULTIVATION OF

CAPSICUM IN GREENHOUSE

* SULPHUR 90% WDG* EGG POWDER* WOOD PLASTIC* COMPOSITE BOARD LINE* SODIUM LAURYL SULPHATE

AND SODIUM LAURYLETHER SULPHATE

* FISH PROCESSING* BABY CEREAL FOOD & MILK

POWDERS (BABY FOOD)* GUR (JAGGERY)* DAIRY PRODUCTS* CHLORINATED PARAFFIN

WAX (CPW)* HAND WASHING

DETERGENT POWDERUSING THE DRY MIXPROCESS INCLUDINGFORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* HANDWASHING DETERGENTPOWDER USING THE DRYMIX PROCESS INCLUDING

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

TERMS AND CONDITIONS

Ask for the quotation for the required project report ateiritechnology@gmail.com or eiriprojects@gmail.com

Mob: +91 9811437895 or +91 9811151047

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)* Ph: +91 9811437895, 9811151047, 91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : eiriprojects@gmail.com, eiribooks@yahoo.com

* Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Deposit the amount in “EIRI “Account with HDFC BANK CA-05532020001279 (RTGS/NEFT/IFSC CODE: HDFC00001981) OR ICICI

BANK CA - 038705000994 (RTGS/IFSC CODE: ICIC0000387) ORAXIS Bank Ltd. CA- 054010200006248 (RTGS/IFSCCODE:UTIB0000054) OR UNION BAK OF INDIA CA-

307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) ORSTATE BANK OF INDIA CA-30408535340 (RTGS/IFSC CODE:

SBIN0001273) & SMS ON PH. 09811437895

FORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* DIGITAL PHOTOPAPER/INKJET PHOTOPAPER

* KAOLIN FOR ROAD MAKING* PEPPERMINT CULTIVATION &

PROCESSING* PEPPERMINT CULTIVATION &

PROCESSING* HDPE PIPE* ACTIVATED CARBON FROM

RICE HUSK* HT & LT INSULATOR, HT AIR

BRAKE SWITCH D.O. FUSE,LIGHTENING ARRESTOR

* PET BOTTLES IN CAP: 500ML,1 LTR, 2 LTRS, 5 LTRS, USEDFOR PACKAGED DRINKINGWATER, EDIBLE OILS

* ALCOHOLIC BEVERAGES(COUNTRY LIQUOR & IMFL)

* QUARTZ BASED INDUSTRIES(QUARTZ POWDER SILICASAND SILICA RAMMINGMASS FUSED SILICA)

* BEEDI (BIDI) BY MACHINE* RICE SHELLER* FRUIT RIPENING CHAMBER* MINERAL WATER AND PET

BOTTLING PLANT* DIAGNOSTIC LAB AND* ONLINE TRADING BUSINESS* CEREAL MILLING* MINI OIL PLANT SUITABLE

FOR GROUNDNUT OIL ANDCOTTON SEED OIL

* CHANACHUR, BHUJIA,GANTHIA (AUTOMATICPLANT)

* KHADYA SURAKSHA (FOODSECURITY)

* PLASTIC WATER STORAGETANKS

* ZINC SULPHATE,MONOHYDRATE & HEPTAHYDRATE

* CIGARETTEMANUFACTURING UNIT

* CATTLE FEED PELLETSPLANT FOR COW &BUFFALOE FOR BOOSTINGMILK AND GROWTHTYRE RECYCLING UNIT

* PAPAIN EXTRACTIONINDUSTRY

* CAKE SHOP* BUSINESS PROCESS

OUTSOURCE (B.P.O.)* EMPTY HARD GELATINE

CAPSULES* BIOFERTILIZER* PLASTIC MOULDING UNIT

(CHAIR, TABLES &VEGETABLE TRAYS)

* GOLD POTASSIUM CYANIDE(G.P.C.)

* HDPE, PVC & CPVC PIPESAND FITTINGS

* NO CARB PASTE(ANTICARBURIZING PASTE-WATER SOLUBLE) FOR HEATTREATMENT

* CONVERSION WASTEPLASTIC WITH TYRE INTOACTIVATED CARBON ANDINDUSTRIAL FUEL

* PYROLYSIS PLANT FROMPLASTIC & RUBBER

* COMPARISON BETWEEN FLYASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* AGAR AGAR* NAIL POLISH* PLASTIC GRANULES FROM

WASTE* AGARBATTI SYNTHETIC

PERFUMERY COMPOUNDS &AGARBATTI COMPOUNDSLIKE (CHAMPA, MOGRA,SANDAL WOOD & LOBAN)

* PET PREFORM AND PETJARS (20 LTRS CAPACITY)

* KRAFT PAPER FROM 100%WASTE PAPER

* PRIVATE UNIVERSITY* LIQUID GLUCOSE AND

MALTODEXTRIN FROMBROKEN RICE

* DRY WALL PUTTY (WHITECEMENT BASED)

* CONSTRUCTION CHEMICALSOT PASTE

* FUSED SILICA FROM SILICASAND

* BANANA CHIPS, BANANAPULP & BANANA POWDER(BANANA PRODUCTS)

* CONFECTIONERY UNIT(TOFFEE, CANDY /LOLLIPOPCHEWING GUM, BUBBLEGUM CHOCOLATE)

* FORMALDEHYDE RESIN(UREA, PHENOL, MELAMINE& THEIR MODIFIED RESINS)

* EPDM RUBBER PROFILES(WEATHER STRIPS,INDUSTRIAL MONOSTRIPSETC)

* GRANITE CUTTING ANDPOLISHING UNIT (100% EOU)

* SURGICAL COTTON, ROLLERBANDAGE, CREPE BANDAGE& PLASTER CART (READYMADE) E.G. GYPSONA 3MCART

* ENTERTAINMENT CLUB,HOLIDAY RESORT, 4 STARHOTEL, AMUSEMENT PARKCUM WATER PARK,MUSHROOM & ITSPRODUCTS, FISH FARMING,LAKE FOR BOATING, DEERPARK ETC.

* HDPE, PVC, LLDPE PIPES/TUBES AND FITTING

* EPOXIDIZED SOYABEAN OIL(SECONDARY PLASTICIZER)USED IN PVC COMPOUND

* POULTRY PROCESSINGPLANT

* B.O.P.P. SELF ADHESIVETAPES

* I.V.SET* MANGANESE OXIDE AND

MANGANESE SULPHATE* ODOURLESS NYLON

GRANULES FROM FIBER OFWASTE TYRE WITHOUTCHANGING PROPERTIES OFNYLON

* PARTICLE BOARD FROM RICEHUSK OR WOOD WASTE ORSUGAR CANE BAGASSE ORMIXED OF ALL ABOVEPOULTRY LAYER ANDBROILER FARMING

* TOMATO, GUAVA AND MANGOPULP

* GREEN HOUSE* HYDROXY PROPYL GUAR

(HPG) AND CARBOXYMETHYL HYDROXY PROPYLGUAR

* BATHSOAP MANUFACTURE* PLASTIC MOULDED CHAIRS

FROZEN POTATO PATTY* CALCIUM ALUMINATE* ACTIVATED CARBON FROM

COCONUT SHELL* RIGID PVC FILM

MANUFACTURE FORPHARMACEUTICALS BLISTER

PACKAGING* NYLONE 66 CURING TAPE

USED IN RUBBER HOSE PIPEWRAPPING

* ANTIFOAMING/DEFOAMINGAGENT LIKE ANTAROL T-709

* SOY AND GLUTEN BASEDMOCK MEAT

* KRAFT PAPER USING WASTEPAPER AND OLDCORRUGATED CARTONS

* GLASS BOTTLE FOR BEERAND BEER MUG (TUMBLER)

* DISPOSABLE SYRINGES ANDNEEDLE PLANT (Single UseSyringes, Single Use Needles &As Syringes)

* DIRECT FILLED BALL PEN(USE AND THROW)

* BENZALKONIUM CHLORIDE* SPINNING COTTON (COTTON

SPINNING PLANT)* CALCIUM CHLORIDE USING

LIME STONE ANDHYDROCHLORIC ACID

* RUBBER POWDER FROMWASTE TYRES

* CALCINATION PLANT FORPYROPHYLLITE ANDDIASPORE MINERALS BYVERTICAL SHAFT KILNPROCESS

* ONION, GARLIC & GINGERDEHYDRATION PLANT

* POTASSIUM NITRATE* POTASSIUM SULPHATE* N.P.K. FERTILIZER* CHICORY EXTRACT

(ROASTED CHICORYGRANULES/CUBES, LIQUIDEXTRACT ETC.)

* SOLID WASTE SEGREGATION* LAMITUBE MANUFACTURE* BOARDING SCHOOL* CERAMIC FUSE TUBE/

BARRELS USED IN HRC FUSE* SODIUM POLYACRYLATE

DISPERSANT FOR USE INWATER BASED PAINT WITHDISPERSANT FOR PIGMENT

* NAIL POLISH, LIPSTICKS,NAIL POLISH REMOVER

* SOYA PRODUCTS (MILK,PANEER, TOFU, BUTTER,CHEESE CURD/YOGURT, ICECREAM) WITH PACKAGINGUNIT

* GREASE MANUFACTURING

Hi-Tech Projects,Apr’16, www.eiriindia.org # 15

Name of Books Rs. US$ Name of Books Rs. US$N Name of Books Rs. US$

CHEMICALS, DYES, LUBRICATINGOILS, PETRO CHEMICALS

ELECTROPLATING

AVAILABLE PROCESS TECHNOLOGY BOOKS AT www.eiriindia.org

* Small Medium & LargeChemical Industries

* Industrial ChemicalsTechnology Hand Book

* Modern Technology ofOrganic & InorganicChemicals

* Electroplating, Anodizing &Surface Finishing Technology

* Hand Book of Agro ChemicalIndust.(Insecticide & Pesticide)

* Technology of Synthetic Dyes,Pigments Intermediates

* Petrochemicals, Lubricants,Greases & Petroleum Refining

* H.B.of Lubricants, Greases &Petrochemicals Technology

* Technology of Gums, Adhesives& Sealants with Formulations

* Hand Book of Adhesiveswith their Formulae (2nd Edn.)

* Adhesives Technology &Formulations Hand Book

* Technology of Glue &Adhesives with AdhesivesBonding and Formulations

* Complete Hand Book onAdhesives and AdhesionTech. with Project Profiles

* Start Your Own ExportBusiness (How To Export)

* Start Your Own SmallBusiness and Industry

* Candle Making Processes &Formulations Hand-Book

* Stationery, Paper Converting& Packaging Industries

* Modern Inks Formulaes &Manufacturing Industries

* Profitable Businesses toStart for Entrepreneurs

* Modern Small & CottageScale Industries

* Profitable Small Cottage Tiny& Home Industries (2nd Edn.)

* Technology of Bio-Fuel(Ethanol & Biodiesel)

* Mod. Tech. of Bioprocessing* ModTech.of BioGas Production

GUMS, ADHESIVES & SEALANTS

BIO FUEL, BIO GAS &BIOPROCESSING

* Tech of Sweets (Mithai)withFormulae

* Technology of Sweets (Mithai),Namkeen and Snacks Foodwith Formulae

* Mfr. of Snacks Food, Namkeen,Pappad & Potato Products

* Technology of Water andPackaged Drinking Water

PACKAGED DRINKING WATER

PRINTING & PACKAGING* Complete Hand Book on Packaging

Technology & Industries* Printing Processes Tech. & Indt.* Hand Book of Printing Technology

(Offset, Screen, Flexo, Gravure,Inkjet & Digital)

* Hand Book of Offset PrintingTechnology

* Screen Printing withProcesses & Technology

* Hand Book of Prepress* Hand Book of Packaging Indus* Modern Packaging Technology

for Processing Food, Bakery,Snack Foods, Spices andAllied Food Products

* Hand Book of Food PackagingTechnology

* Modern Tech. of Printing Inks* Hand Book of Packaging

Technoloy

* Paint Pigment Varnish &Lacquer Manufacturing

* Paint Varnish Solvents& Coating Technology

* Paint, Pigment, Solvent,Coating, Emulsion, PaintAdditives & Formulations

* Technology of Coatings, Resins,Pigments & Inks Industries

* Mfg. Tech. & Formulations H.B.on Thinners, Putty, Wall & Indu.Finishes & Synthetic Resins

* Technology of SyntheticResins & Emulsion Polymers

* Technology of Paints andCoatings with Formulations

* Powder Coating Technology

* Moulds Design & ProcessingHand Book

* Hand Book of Plastic Materials& Processing Technology

* Injection Moulding of Plastics* Plastic Processing &

Packaging Industries* Plastic Waste Recycling Tech.* Technology of Plastic Films* Rotational Moulding Technology

HandBook* Plastic Compounding, Master

Batches, PET & Other Plastics* Synthetic Resins Technology

with Formulations

* Technology of PVC Compounding& Its Applications

* Polymer & Plastic Technology* H.B. of Fibre Glass Moulding* Techn. of Reinforced Plastics* Plastic Additives Technology* Technology of PET Bottles,

Preform and PET Recycling* Modern Technology of

Extrusion & Extruded Products* Technology of Synthetic

Resins & Emulsion Polymers* Technology of Plastic Additives

with Processes and Packaging* Complete Technology Book On

Identification Of Plastics AndPlastic Products Materials(Additives, Applications,Biodegradation, Biomedical,Bulk Moulding Compound,Chemical Analysis, Xlpe, DripIrrigation, Expanded Polyethylene,Polystyrene & Hdpe)

* Identification Of Plastics AndOther Plastic Process Industries(Polystyrene, Nylon, ThermoplasticElastomer, Alkyd Resin,Polypropylene Plastics, MelamineFormaldehyde Resins, Abs, PlasticBlends, Polyvinylidene ChloridePlastics, Polymer, Pipes)

* Complete Technology BookOf Plastic Processing AndRecycling Of Plastics WithProject Profiles

* Modern Technology OfInjection Moulding, BlowMoulding, Plastic Extrusion,Pet And Other Plastics

* Technology of Biscuits, Rusks,Crackers & Cookies withFormulations (Wafer Biscuits,Cream Sandwich Biscuits, OatCereal Biscuits, Low SugarBiscuits, High Fibre Biscuits,Herbal Biscuits, Dog Biscuitsand other Biscuits)

* Hand Book of Confectionerywith Formulations

* Breakfast, Dietary Food, Pasta& Cereal Products Technology

* Hand Book of Modern BakeryProducts (2nd Edn.)

* Modern Bakery Technology &Fermented Cereal Productswith Formulae

* Technology of Confectionery,Chocolates, Toffee, Candy,Chewing & Bubble Gums,Lollipop and Jelly Productswith Formulations

* Hand Book of Bakery Industries

* Start Your Own Wheat Flour Mill (Atta, Maida, Suji, Bran & Besan)

PAINT, VARNISH, SOLVENTS,POWDER COATING & LACQUERS

PLASTIC/POLYMER PROCESSING,COMPOUNDING, INJECTION

MOULDING, ROTATIONALMOULDING, PLASTIC FILM, FIBRE

GLASS, PLASTIC WASTERECYCLING, MOULDS, PET &

RESINS, ADDITIVES INDUSTRIES

BAKERY, CONFECTIONERY,BISCUITS, COOKIES,

BREAKFAST, PASTA & CEREALS

FLOUR MILL (ATTA MAIDA, SUJI)

SMALL SCALE INDUSTRIES,STATIONERY, PAPER, INKS,

CANDLES & EXPORT BUSINESS

SWEETS, NAMKEEN & SNACK FOOD

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ Name of Books Rs. US$

* Poultry Farm & Feed Formulae* Hand Book of Pig Farming* Agro Based H.B. of Plantation,

Cultivation & Farming* Agro-Based Plantation

Cultivation & Farming* Agro Chemical Industries

(Insecticide & Pesticides)* Modern Bee Keeping & Honey

Processing* Technology of Modern Rice

Milling and Basmati Rice* Hand Book of Goat Farming* Floriculture Hand Book

(Flowers Growing Technology)* Aloe Vera Cultivation,

Processings, Formulations andManufacturing Technology

* Dairy Formulations, Processes &Milk Processing Industries

* Milk Processing and DairyProducts Industries

* Dairy Farming to Produce Milkwith Packaging

* Hand Book of Ice CreamTechnology and Formulae

* Hand Book of Milk Processing,Dairy Products and PackagingTechnology

* Dairy Farming for MilkProduction Technology

* Commercial Dairy Farmingwith Project Profiles

* Herbs, Medicinal & AromaticPlants Cultivation

* Aushidhi and SungndhitPaudho Ka Vaysayik (Hindi)

* Aromatic & Medicinal Plantsand Biodiesel (Jatropha)

* Hand Book of Medicinal &Aromatic Plants

* Fruits & Vegetable ProcessingHand Book (2nd Edn.)

* Fruit Beverage & Processingwith Mango

* Food Processing & AgroBased Industries (2nd Edn.)

* Preservation & Canning ofFruits and Vegetables

* Hand Book of FoodDehydration & Drying

* Meat Processing & MeatProducts Hand Book

N Name of Books Rs. US$

AGRO CULTIVATION, ANIMALFARMING, AGRO PLANTATION &AGRO CHEMICAL/PESTICIDES/

FLORICULTURE & BEE KEEPING

HERBS CULTIVATION/MEDICINES

FOOD & AGRO PROCESS, TOMATOPROCESSING, PRESERVATION,

DEHYDRATION, FRUIT BEVERAGE,POTATO, MAIZE, MEAT, BANANA

* Technology of FoodPreservation & Processing

* Food Packaging Technology* Agro Based & Processed

Food Products* Potato & Potato Processing

Technology* Technology of Maize

& Allied Corn Products* Technology of Food

Processing Industries* Complete Book on Banana

Cultivation, DehydrationRipening, Processing,Products & Packaging Tech

* Agro Food Processingand Packaging Technology

* Modern Tech. of TomatoProcessing & Dehydration(Ketchup, Juice, Paste, Soup& Drying)

* Technology of FoodChemicals, Pigments& Food Aroma Compd.

* Modern Technology of AgroProcessing & Food PackagingProducts with ProjectProfiles

* Technology of Chicken Meatand Poultry Products

* Poultry Farming, Hatchery &Broiler Production

* Poultry Farm & Feed Formulae

* Modern Technology of Wood,Veneer, Plywood, ParticleBoard, Fibreboard, Bamboo& Forest Products

* Household Soap,ToiletSoap & Other Soap

* Profitable Small Scale Mfr.of Soaps & Detergents

* Synthetic Detergents withFormulations (2nd Edn.)

* Modern Technology of AcidSlurry, Surfactants, Soap andDetergents with Formulae

* Complete Technology Book onDetergents with Formulations(Detergent Cake, DishwashingDetergents, Liquid &PasteDetergents, Enzyme Detergents,Cleaning Powder & SprayDried Washing Powder)

* Manufacture of WashingSoap, Toilet Soap, DetergentPowders, Liquid Soap & HerbalDetergents and Perfumes withFormulations

POULTRY FARM, HATCHERY &CHICKEN MEAT TECHNOLOGY

WOOD, PLYWOOD, PARTICLE,BOARD, BAMBOO & FOREST

SOAP, DETERGENT & ACID SLURRY

COSMETICS TECHNOLOGY(SYNTHETIC & HERBAL)

* Cosmetics Processes &Formulations Hand Book

* Herbal Cosmetics & BeautyProducts with Formulations

* Profitable Small ScaleManufacture of Cosmetics(Synthetic & Herbal)

* Hand Book of Synthetic &Herbal Cosmetics

* Technology of HerbalCosmetics & ToiletriesProducts with Formulae

* Hand Book of Oils, Fats andDerivatives with Refining &Packaging Technology

* Technology of OilseedsProcessing, Oils & Fatsand Refining

* Essential Oils Manufacturing& Aromatic Plants

* Modern Technology ofEssential Oils

* Technology of Perfumes,Flavours & Essential Oils

* Essential Oils Processes& Formulations

* Hand Book of Flavours &Food Colourants Technology

* H. B. of Perfumes & Flavours* Hand Book of Perfumes

with Formulations (2nd Edn.)* Technology of Perfumes,

Flavours & Essential Oils* H.B. of Flavours Technology

* Technology Of Solar Pv Panels,Energy, Cells, Lantern, Cooler,Light System, Cfl Inverter,Photovoltaic System, PowerPlant, Water Heater, Collector,Solar Cooling, Refrigeration,Solar Drying, Tractor, HomeSystem, Dish Engine,Nanotechnology & Other SolarProducts Manufacturing

* Technology of Building Materials& Chemicals with Processes

* Mod. Tech. of Bleaching, Dyeing,Printing & Finishing of Textiles

* Technology of Textiles (Spinning& Weaving, Dyeing, Scouring,Drying, Printing and Bleaching)

* Garments Manufacturing Tech.

* H.B.of Pulp & Paper, PaperBoard & Paper Based Tech.

OILSEEDS AND FATS

ESSENTIAL OILS & AROMATIC

PERFUMES AND FLAVOURS

SOLAR PV PANELS, ENERGY

BUILDING MATERIAL & CHEMICALS

TEXTILE, GARMENTS, DYEING...

DAIRY FARM, MILK PROCESSINGAND ICE CREAM

PULP & PAPER TECHNOLOGY

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ N Name of Books Rs. US$

* Technology of Spices andSeasoning of Spices withFormulae

* Spices &Packaging with Formula* Start Your Own Cold Storage Unit

* Complete Tech. of NonwovensFabrics, CarryBags, Composite,Geotextiles, Medical Textiles,Fibres, Felts, Apparels, Spunlaceand Absorbent Nonwoven

* Pharmaceuticals and DrugsTechnology withFormulations

* Hand Book of Leather &Leather Products Technology

* Hand Book of Biotechnology

* H.B.of Ceramics & CeramicsProcessing Technology

* Hand Book of Tree Farming

* Hand Book of MushroomCultivation, Processing& Packaging

* Biofertilizers & Vermiculture

* Modern Technology ofBiodegradable Plastics andPolymers With Processes(Bio-Plastic, Starch Plastics,Cellulose Polymers & others)

* Production of BiodegradablePlastics and BioplasticsTechnology

* Complete Hand Book onFrozen Food Processing& Freeze Drying Technology

* Modern Technology ofFrozen Food Products

* Hand Book of Minerals andMinerals Based Industries

* Hand Book of Organic Farmingand Organic Foods with Vermi-Composting & Neem Product

* Hand Book of Fish Farmingand Fishery Products

* Textile Auxiliaries andChemicals with Processes& Formulations

* Technology of TextileChemicals withFormulations

* Modern Technology of TextileAuxiliary and chemicalswith formulations

* Textile Processing Chemicals,Enzymes, Dye Fixing Agentsand Other Finishes withProject Profiles

* Manufacture of Disinfectants,Cleaners, Phenly, Repellents,Deodorants, DishwashingDetergents & Aerosols withFormulations

* Start Your Own Coffee &Coffee Processing

* Complete Book on OnionCultivation, Dehydration,Flakes, Powder, Processingand Packaging Technology

N Name of Books Rs. US$

Send Draft in favour of "Engineers India Research Institute" (Postage Rs. 100/- Extra)

NON WOVEN TECHNOLOGY

SPICES, SEASONING& COLD STORAGE

PHARMACEUTICALS & DRUGS

LEATHER &LEATHER PRODUCTS

BIOTECHNOLOGY

CERAMICS & CERAMIC PROCESS

TREE FARMING

MUSHROOM PROCESSING

BIOFERTILIZERS & VERMICULTURE

BIODEGRADABLE PLASTICSAND POLYMERS

FROZEN FOODAND FREEZE DRYING

RUBBER CHEMICALS, COMPOUNDS& RUBBER INDUSTRIES

AYURVEDIC MEDICINES

* Rubber Chemicals &Processing Industries

* Modern Rubber Chemicals,Compounds & RubberGoods Technology

* Technology of Rubber &Rubber Goods Industries

* Ayurvedic & HerbalMedicines with Formulaes

* Hand Book of AyurvedicMedicines with Formulations

* Modern Technology of NonFerrous Metals and MetalExtraction

* Processing Technology ofSteels and Stainless Steels

* Modern Technology ofRolling Mill, Billets, SteelWire, Galvanized Sheet,Forging & Castings

* Manufacturing Technology ofNon-Ferrous Metal Products

* Modern Technology of FoodAdditives, Sweeteners andFood Emulsifiers

* Technology of FoodChemicals, Pigments andFood Aroma Compounds

* Technology of DisposableMedical Products

* Technology of Soya Milk, Tofu,Hydrolyzate, Allied SoyabeanProducts with project Profiles

* Technology of SOYBEANProducts with Formulae

* Technology of Products fromWastes (Industrial, Agriculture,Medical, Municipality, Organic& Biological) By Panda

* Products from WasteTechnology Hand Book

* Technology of WineProduction and Packaging

* Casting Technology H.Book

STAINLESS STEEL, NON FERROUSMETALS, BILLETS & ROLLING MILL

FOOD ADDITIVES/CHEMICALS ANDSWEETENERS & FOOD EMULSIFIERS

DISPOSABLE MEDICAL PRODUCTS

SOYA MILK, TOFU & SOY PRODUCTS

PRODUCTS FROM WASTE

WINE PRODUCTION

ORGANIC FARMING & FOOD/NEEM

FISH FARMING & FISHERY PRODUCTS

TEXTILE AUXILIARY & CHEMICALS

DISINFECTANTS, CLEANERS,PHENYL, DEODORANTS,

DISHWASHING DETERGENTS ETC.

COFFEE & COFFEE PROCESSING

CASTING TECHNOLOGY

ONION CULTIVATION,DEHYDRATION, POWDER

PROCESSING & PACKAGING

MINERAL AND MINERALS

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)

* Ph: +91 9811437895, 9811151047,91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : eiriprojects@gmail.com,

eiritechnology@gmail.com* Website: www.eiriindia.org,

www.industrialprojects.inDeposit the amount in “EIRI

“Account with HDFC BANK -05532020001279 (RTGS/NEFT/

IFSC CODE: HDFC0001981) ORICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE:

ICIC0000387)