Just KissesDesigned by Elise Lea for RKwww.robertkaufman.com

Featuring

COSMOS

For questions about this pattern, please email Patterns@RobertKaufman.com.

Finished quilt measures: 56” x 64”

page 2

Color Fabric Name/SKU Yardage

AMD-19364-264 SPA

AMD-19361-264 SPA

AMD-19357-264 SPA

AMD-19362-299 RIVIERA

F

G

H

I

1/8 yard

1/8 yard

1/8 yard

1/8 yard

1/2 yard

3 yards

1-1/8 yards

1/8 yard

1/8 yard

1/8 yard

Fabric and Supplies Needed

Color Fabric Name/SKU Yardage

AMD-7000-9 NAVY

AMD-19365-257 CARIBBEAN

AMD-19345-257 CARIBBEAN

AMD-19348-257 CARIBBEAN

AMD-19359-257 CARIBBEAN

Fabric amounts based on yardage that is 42” wide.

A

B

C

D

E

Copyright 2019, Robert KaufmanFor individual use only - Not for resale

You will also need:3-5/8 yards for backing

- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!

Notes Before You Begin

AMD-19365-257 CARIBBEAN

*Also used for Fabric B

Binding*

page 3

From Fabric A, cut:four 6-1/2” x WOF strips. Set two aside for strip piecing. From the two remaining strips, cut: fifty-six1-1/2”x6-1/2”rectanglesfour 5-1/4” x WOF strips. Subcut: twenty-eight5-1/4”squaresfortheflyinggeesefour 4-1/2” x WOF strips. Set two aside for strip piecing. From the two remaining strips, cut: fifty-six1-1/2”x4-1/2”rectanglesthree 3-3/8” x WOF strips. Subcut: twenty-eight 3-3/8” squares for the Square-in-a-Square units.seven 2-1/2” x WOF strips. Subcut: one hundred twelve 2-1/2” squaresfour 2-1/2” x WOF strips. Set two aside for strip piecing. From the two remaining strips, cut: fifty-six1-1/2”x2-1/2”rectangles From Fabric B, cut:eight 2-7/8” x WOF strips. Subcut: onehundredtwelve2-7/8”squaresfortheflyinggeesefour 2-7/8” x WOF strips. Subcut: fifty-six2-7/8”squares.Cutinhalfalongthediagonal,creatingonehundred twelve triangles for the Square-in-a-Square units.two 1-1/2” x WOF strips. Set aside for strip piecing.

From each of Fabrics C-I, cut:two 1-1/2” x WOF strips. Set aside for strip piecing.

From the Binding Fabric, cut:seven 2-1/2” x WOF strips

Cutting Instructions

Step 1: Pin two 2-7/8” Fabric B squares in opposing corners of a 5-1/4” Fabric A square, RST. The squares will overlap slightly in the center of the large square. Using a ruler, draw a diagonal line through the squares.

Assemble the Flying Geese

page 4

Step 3: Press the fabric toward smaller triangles. Repeat with the second unit.

Step 4: Place one 2-7/8” Fabric B square at the corner of sewn block unit. Draw diagonal line in pencil. Sew a scant 1/4” seam on each side of diagonal line. Set seam (press). Cut along diagonal line, creating two identical units.

Step 5: Press the seam toward smaller triangle. Trim off small dog ears left by the seam allowance. Trim to 2-1/2” x 4-1/2” if necessary. Repeat to makefourflyinggeeseblocks.

Step 6: Repeat with all remaining 2-7/8” Fabric B squares and 5-1/4” Fabric AsquarestomakeatotalofonehundredtwelveA/Bflyinggeeseblocks.

Step 7: Sew a Fabric B triangle to opposite sides of a 3-3/8” Fabric A square. Press seam allowances toward the triangles. Repeat on remaining sides of the Fabric A square. Trim the SIAS block to 4-1/2” square.

Step 8: Repeat with all remaining Fabric B triangles and 3-3/8” Fabric A squares to make a total of twenty-eight SIAS units.

Assemble the Square-in-a-Square Units (SIAS)

Step 2: Sew scant 1/4” seam on each side of the diagonal line. Set theseambypressingitflat.Cutalongthediagonalline,creatingtwoidentical units.

page 5

Step 9: Gather:one SIAS unit from Step 8four Flying Geese units from Step 6four 2-1/2” Fabric A squares

Arrange the units into three rows of three. Note the fabric placement and block orientation in the Block Assembly Diagram.

Step 12: Gather:one 1-1/2” x WOF Fabric E stripone 6-1/2” x WOF Fabric A stripone 1-1/2” x WOF Fabric I strip

Sew together, in that order, along the longest edge. Press toward the 1-1/2” strips. Repeat to make a second strip set like this.

Cuteachstripsettoformatotaloffifty-six1-1/2”x8-1/2”units.

Assemble the A Blocks

Assemble the Strip Sets

Step 10: Sew the units together to form the rows. Press the seams away from the flyinggeeseunits.

Step 11: Sew the rows together, nesting the seams and pressing the seams to one side to form the block.

The A Block will measure 10-1/2” square. Repeat Steps 9-11 to make a total of twenty-eight A Blocks.

page 6

Step 13: Gather:one 1-1/2” x WOF Fabric D stripone 4-1/2” x WOF Fabric A stripone 1-1/2” x WOF Fabric H strip

Sew together, in that order, along the longest edge. Press toward the 1-1/2” strips. Repeat to make a second strip set like this.

Cuteachstripsettoformatotaloffifty-six1-1/2”x6-1/2”units.

Step 14: Gather:one 1-1/2” x WOF Fabric B stripone 2-1/2” x WOF Fabric A stripone 1-1/2” x WOF Fabric G strip

Sew together, in that order, along the longest edge. Press toward the 1-1/2” strips. Repeat to make a second strip set like this.

Cuteachstripsettoformatotaloffifty-six1-1/2”x4-1/2”units.

Step 15: Gather:one 1-1/2” x WOF Fabric C stripone 1-1/2” x WOF Fabric F strip

Sew together, in that order, along the longest edge. Press toward the darker fabric. Repeat to make a second strip set like this.

Cuteachstripsettoformatotaloffifty-six1-1/2”x2-1/2”units.

Step 16: Sew two completed Step 15 units together to form a four patch. Press.

page 7

Assemble the B Blocks

Step 17: Gather:one four-patch unit from Step 16two strip set units from Step 12two strip set units from Step 13two strip set units from Step 14two 1-1/2” x 2-1/2” Fabric A rectanglestwo 1-1/2” x 4-1/2” Fabric A rectanglestwo 1-1/2” x 6-1/2” Fabric A rectangles

Arrange the units as shown. Note the fabric placement in the Block Assembly Diagram.

Step 18: Sew 2-1/2” Fabric A rectangles to the top and bottom of the four-patch center. Press away from the center.

Step 19: Sew the Step 14 units to the left and right of the four-patch center, noting the fabric placement in the diagram. Press away from the center.

Step 20: Sew 4-1/2” Fabric A rectangles to the top and bottom of the block center. Press away from the center.

Step 21: Sew the Step 13 units to the left and right of the block center, noting the fabric placement in the diagram. Press away from the center.

Step 22: Sew 6-1/2” Fabric A rectangles to the top and bottom of the block center. Press away from the center.

Step 23: Sew the Step 12 units to the left and right of the block center, noting the fabric placement in the diagram. Press away from the center.

The B Block will measure 10-1/2” square. Repeat Steps 17-23 to make a total of twenty-eight B Blocks.

page 8

Assemble the Quilt

Step 24: Arrange the blocks into eight rows of seven blocks. Note the fabric placement and block orientation in the Quilt Assembly Diagram.

Step 25: Sew the blocks together to form rows. Press the rows to the left in the odd numbered rows and to the right in the even numbered rows.

Step 26: Sew the rows together to form the quilt center. Press the row seams open.

Your quilt top is complete! Baste, quilt, bind and enjoy!

This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2019. All rights reserved.